sc7280: Add support for USB
Adding USB addressmap for sc7280.
Use common USB driver for sc7280.
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ib92b74c8035a8c0148a9aa48e7870b261b832a33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
diff --git a/src/soc/qualcomm/sc7280/Makefile.inc b/src/soc/qualcomm/sc7280/Makefile.inc
index 72fb57f..6a02bdb 100644
--- a/src/soc/qualcomm/sc7280/Makefile.inc
+++ b/src/soc/qualcomm/sc7280/Makefile.inc
@@ -30,12 +30,16 @@
romstage-y += ../common/qclib.c
romstage-y += ../common/mmu.c
romstage-y += mmu.c
+romstage-y += ../common/usb/usb.c
romstage-$(CONFIG_DRIVERS_UART) += ../common/qupv3_uart.c
################################################################################
ramstage-y += soc.c
ramstage-y += cbmem.c
ramstage-$(CONFIG_DRIVERS_UART) += ../common/qupv3_uart.c
+ramstage-y += ../common/usb/usb.c
+ramstage-y += ../common/usb/snps_usb_phy.c
+ramstage-y += ../common/usb/qmpv4_usb_phy.c
ramstage-y += ../common/aop_load_reset.c
ramstage-y += cpucp_load_reset.c
diff --git a/src/soc/qualcomm/sc7280/include/soc/addressmap.h b/src/soc/qualcomm/sc7280/include/soc/addressmap.h
index 8515a04..31f409f 100644
--- a/src/soc/qualcomm/sc7280/include/soc/addressmap.h
+++ b/src/soc/qualcomm/sc7280/include/soc/addressmap.h
@@ -58,4 +58,14 @@
#define EPSSTOP_EPSS_TOP 0x18598000
#define EPSSFAST_BASE_ADDR 0x18580000
+/*
+ * USB BASE ADDRESSES
+ */
+#define HS_USB_PRIM_PHY_BASE 0x088e3000
+#define QMP_PHY_QSERDES_COM_REG_BASE 0x088e9000
+#define QMP_PHY_QSERDES_TX_REG_BASE 0x088e9200
+#define QMP_PHY_QSERDES_RX_REG_BASE 0x088e9400
+#define QMP_PHY_PCS_REG_BASE 0x088e9c00
+#define USB_HOST_DWC3_BASE 0x0a60c100
+
#endif /* __SOC_QUALCOMM_SC7280_ADDRESS_MAP_H__ */