diff --git a/src/mainboard/google/brya/variants/agah/overridetree.cb b/src/mainboard/google/brya/variants/agah/overridetree.cb
index 484c5f6..9c0bff9 100644
--- a/src/mainboard/google/brya/variants/agah/overridetree.cb
+++ b/src/mainboard/google/brya/variants/agah/overridetree.cb
@@ -224,14 +224,14 @@
 						register "desc" = ""USB3 Type-C Port C0 (MLB)""
 						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
 						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))"
 						device ref tcss_usb3_port1 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB3 Type-C Port C2 (MLB)""
 						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
 						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
 						device ref tcss_usb3_port3 on end
 					end
 				end
@@ -244,14 +244,14 @@
 						register "desc" = ""USB2 Type-C Port C0 (MLB)""
 						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
 						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))"
 						device ref usb2_port1 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 Type-C Port C2 (MLB)""
 						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
 						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
 						device ref usb2_port3 on end
 					end
 					chip drivers/usb/acpi
@@ -263,14 +263,14 @@
 						register "desc" = ""USB2 Type-A Port 2""
 						register "type" = "UPC_TYPE_A"
 						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 2))"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 2))"
 						device ref usb2_port8 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB2 Type-A Port 0""
 						register "type" = "UPC_TYPE_A"
 						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
 						device ref usb2_port9 on end
 					end
 					chip drivers/usb/acpi
@@ -284,14 +284,14 @@
 						register "desc" = ""USB3 Type-A Port 0""
 						register "type" = "UPC_TYPE_USB3_A"
 						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
 						device ref usb3_port1 on end
 					end
 					chip drivers/usb/acpi
 						register "desc" = ""USB3 Type-A Port 2""
 						register "type" = "UPC_TYPE_USB3_A"
 						register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 2))"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 2))"
 						device ref usb3_port2 on end
 					end
 				end