mainboard/google/reef: add pyro variant.
Create the initial Pyro variant which refers to the Reef.
Pyro is APL Chrome board that deviate from reference board Reef.
BRANCH=master
BUG=None
TEST=Build
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Change-Id: I9beed1f6895e8891d3d51b563edfe172f566718b
Reviewed-on: https://review.coreboot.org/16855
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
diff --git a/src/mainboard/google/reef/variants/pyro/Makefile.inc b/src/mainboard/google/reef/variants/pyro/Makefile.inc
new file mode 100644
index 0000000..fd45b94
--- /dev/null
+++ b/src/mainboard/google/reef/variants/pyro/Makefile.inc
@@ -0,0 +1 @@
+romstage-y += memory.c
diff --git a/src/mainboard/google/reef/variants/pyro/devicetree.cb b/src/mainboard/google/reef/variants/pyro/devicetree.cb
new file mode 100644
index 0000000..087f858
--- /dev/null
+++ b/src/mainboard/google/reef/variants/pyro/devicetree.cb
@@ -0,0 +1,173 @@
+chip soc/intel/apollolake
+
+ device cpu_cluster 0 on
+ device lapic 0 on end
+ end
+
+ register "pcie_rp0_clkreq_pin" = "0" # wifi/bt
+ # Disable unused clkreq of PCIe root ports
+ register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED"
+ register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED"
+ register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED"
+ register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED"
+ register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED"
+
+ # GPIO for PERST_0
+ # If the Board has PERST_0 signal, assign the GPIO
+ # If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
+ register "prt0_gpio" = "GPIO_PRT0_UDEF"
+
+ # EMMC TX DATA Delay 1
+ # Refer to EDS-Vol2-22.3.
+ # [14:8] steps of delay for HS400, each 125ps.
+ # [6:0] steps of delay for SDR104/HS200, each 125ps.
+ register "emmc_tx_data_cntl1" = "0x0C16"
+
+ # EMMC TX DATA Delay 2
+ # Refer to EDS-Vol2-22.3.
+ # [30:24] steps of delay for SDR50, each 125ps.
+ # [22:16] steps of delay for DDR50, each 125ps.
+ # [14:8] steps of delay for SDR25/HS50, each 125ps.
+ # [6:0] steps of delay for SDR12, each 125ps.
+ register "emmc_tx_data_cntl2" = "0x28162828"
+
+ # EMMC RX CMD/DATA Delay 1
+ # Refer to EDS-Vol2-22.3.
+ # [30:24] steps of delay for SDR50, each 125ps.
+ # [22:16] steps of delay for DDR50, each 125ps.
+ # [14:8] steps of delay for SDR25/HS50, each 125ps.
+ # [6:0] steps of delay for SDR12, each 125ps.
+ register "emmc_rx_cmd_data_cntl1" = "0x00181717"
+
+ # EMMC RX CMD/DATA Delay 2
+ # Refer to EDS-Vol2-22.3.
+ # [17:16] stands for Rx Clock before Output Buffer
+ # [14:8] steps of delay for Auto Tuning Mode, each 125ps.
+ # [6:0] steps of delay for HS200, each 125ps.
+ register "emmc_rx_cmd_data_cntl2" = "0x10008"
+
+ # Enable DPTF
+ register "dptf_enable" = "1"
+
+ # Enable Audio Clock and Power gating
+ register "hdaudio_clk_gate_enable" = "1"
+ register "hdaudio_pwr_gate_enable" = "1"
+ register "hdaudio_bios_config_lockdown" = "1"
+
+ # Enable lpss s0ix
+ register "lpss_s0ix_enable" = "1"
+
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route, i.e., if this route changes then the affected GPE
+ # offset bits also need to be changed. This sets the PMC register
+ # GPE_CFG fields.
+ register "gpe0_dw1" = "PMC_GPE_N_31_0"
+ register "gpe0_dw2" = "PMC_GPE_N_63_32"
+ register "gpe0_dw3" = "PMC_GPE_SW_31_0"
+
+ # Enable I2C2 bus early for TPM access
+ register "i2c[2].early_init" = "1"
+
+ # Minimum SLP S3 assertion width 28ms.
+ register "slp_s3_assertion_width_usecs" = "28000"
+
+ device domain 0 on
+ device pci 00.0 on end # - Host Bridge
+ device pci 00.1 on end # - DPTF
+ device pci 00.2 on end # - NPK
+ device pci 02.0 on end # - Gen
+ device pci 03.0 on end # - Iunit
+ device pci 0d.0 on end # - P2SB
+ device pci 0d.1 on end # - PMC
+ device pci 0d.2 on end # - SPI
+ device pci 0d.3 on end # - Shared SRAM
+ device pci 0e.0 on # - Audio
+ chip drivers/generic/max98357a
+ register "sdmode_gpio" = "ACPI_GPIO_OUTPUT(GPIO_76)"
+ device generic 0 on end
+ end
+ end
+ device pci 11.0 off end # - ISH
+ device pci 12.0 off end # - SATA
+ device pci 13.0 off end # - Root Port 2 - PCIe-A 0
+ device pci 13.1 off end # - Root Port 3 - PCIe-A 1
+ device pci 13.2 off end # - Root Port 4 - PCIe-A 2
+ device pci 13.3 off end # - Root Port 5 - PCIe-A 3
+ device pci 14.0 on
+ chip drivers/intel/wifi
+ register "wake" = "GPE0_DW3_00"
+ device pci 00.0 on end
+ end
+ end # - Root Port 0 - PCIe-B 0 - Wifi
+ device pci 14.1 off end # - Root Port 1 - PCIe-B 1
+ device pci 15.0 on end # - XHCI
+ device pci 15.1 off end # - XDCI
+ device pci 16.0 on # - I2C 0
+ chip drivers/i2c/da7219
+ register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+ register "btn_cfg" = "50"
+ register "mic_det_thr" = "500"
+ register "jack_ins_deb" = "20"
+ register "jack_det_rate" = ""32ms_64ms""
+ register "jack_rem_deb" = "1"
+ register "a_d_btn_thr" = "0xa"
+ register "d_b_btn_thr" = "0x16"
+ register "b_c_btn_thr" = "0x21"
+ register "c_mic_btn_thr" = "0x3e"
+ register "btn_avg" = "4"
+ register "adc_1bit_rpt" = "1"
+ register "micbias_lvl" = "2600"
+ register "mic_amp_in_sel" = ""diff""
+ device i2c 1a on end
+ end
+ end
+ device pci 16.1 on end # - I2C 1
+ device pci 16.2 on
+ chip drivers/i2c/tpm
+ register "hid" = ""GOOG0005""
+ register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+ device i2c 50 on end
+ end
+ end # - I2C 2
+ device pci 16.3 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0001""
+ register "desc" = ""ELAN Touchscreen""
+ register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "probed" = "1"
+ device i2c 10 on end
+ end
+ end # - I2C 3
+ device pci 17.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+ register "wake" = "GPE0_DW1_15"
+ register "probed" = "1"
+ device i2c 15 on end
+ end
+ end # - I2C 4
+ device pci 17.1 on end # - I2C 5
+ device pci 17.2 on end # - I2C 6
+ device pci 17.3 on end # - I2C 7
+ device pci 18.0 on end # - UART 0
+ device pci 18.1 on end # - UART 1
+ device pci 18.2 on end # - UART 2
+ device pci 18.3 on end # - UART 3
+ device pci 19.0 on end # - SPI 0
+ device pci 19.1 on end # - SPI 1
+ device pci 19.2 on end # - SPI 2
+ device pci 1a.0 on end # - PWM
+ device pci 1b.0 on end # - SDCARD
+ device pci 1c.0 on end # - eMMC
+ device pci 1e.0 off end # - SDIO
+ device pci 1f.0 on # - LPC
+ chip ec/google/chromeec
+ device pnp 0c09.0 on end
+ end
+ end
+ device pci 1f.1 on end # - SMBUS
+ end
+end
diff --git a/src/mainboard/google/reef/variants/pyro/include/variant/acpi/dptf.asl b/src/mainboard/google/reef/variants/pyro/include/variant/acpi/dptf.asl
new file mode 100644
index 0000000..43e2e93
--- /dev/null
+++ b/src/mainboard/google/reef/variants/pyro/include/variant/acpi/dptf.asl
@@ -0,0 +1,89 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define DPTF_CPU_PASSIVE 95
+#define DPTF_CPU_CRITICAL 99
+#define DPTF_CPU_ACTIVE_AC0 90
+#define DPTF_CPU_ACTIVE_AC1 80
+#define DPTF_CPU_ACTIVE_AC2 70
+#define DPTF_CPU_ACTIVE_AC3 60
+#define DPTF_CPU_ACTIVE_AC4 50
+
+#define DPTF_TSR0_SENSOR_ID 0
+#define DPTF_TSR0_SENSOR_NAME "Battery"
+#define DPTF_TSR0_PASSIVE 48
+#define DPTF_TSR0_CRITICAL 70
+
+#define DPTF_TSR1_SENSOR_ID 1
+#define DPTF_TSR1_SENSOR_NAME "Ambient"
+#define DPTF_TSR1_PASSIVE 60
+#define DPTF_TSR1_CRITICAL 70
+
+#define DPTF_TSR2_SENSOR_ID 2
+#define DPTF_TSR2_SENSOR_NAME "Charger"
+#define DPTF_TSR2_PASSIVE 55
+#define DPTF_TSR2_CRITICAL 100
+
+#define DPTF_ENABLE_CHARGER
+
+/* Charger performance states, board-specific values from charger and EC */
+Name (CHPS, Package () {
+ Package () { 0, 0, 0, 0, 255, 0xBB8, "mA", 0 }, /* 3A (MAX) */
+ Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */
+ Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */
+ Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */
+ Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 }, /* 0.0A */
+})
+
+Name (DTRT, Package () {
+ /* CPU Throttle Effect on CPU */
+ Package () { \_SB.PCI0.TCPU, \_SB.PCI0.TCPU, 100, 50, 0, 0, 0, 0 },
+
+ /* CPU Effect on Temp Sensor 0 */
+ Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR0, 100, 600, 0, 0, 0, 0 },
+
+#ifdef DPTF_ENABLE_CHARGER
+ /* Charger Effect on Temp Sensor 1 */
+ Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR1, 200, 600, 0, 0, 0, 0 },
+#endif
+
+ /* CPU Effect on Temp Sensor 1 */
+ Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR1, 100, 600, 0, 0, 0, 0 },
+
+ /* CPU Effect on Temp Sensor 2 */
+ Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR2, 100, 600, 0, 0, 0, 0 },
+})
+
+Name (MPPC, Package ()
+{
+ 0x2, /* Revision */
+ Package () { /* Power Limit 1 */
+ 0, /* PowerLimitIndex, 0 for Power Limit 1 */
+ 1600, /* PowerLimitMinimum */
+ 12000, /* PowerLimitMaximum */
+ 1000, /* TimeWindowMinimum */
+ 1000, /* TimeWindowMaximum */
+ 200 /* StepSize */
+ },
+ Package () { /* Power Limit 2 */
+ 1, /* PowerLimitIndex, 1 for Power Limit 2 */
+ 6000, /* PowerLimitMinimum */
+ 8000, /* PowerLimitMaximum */
+ 1000, /* TimeWindowMinimum */
+ 1000, /* TimeWindowMaximum */
+ 1000 /* StepSize */
+ }
+})
diff --git a/src/mainboard/google/reef/variants/pyro/include/variant/ec.h b/src/mainboard/google/reef/variants/pyro/include/variant/ec.h
new file mode 100644
index 0000000..586f106
--- /dev/null
+++ b/src/mainboard/google/reef/variants/pyro/include/variant/ec.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_EC_H
+#define MAINBOARD_EC_H
+
+#include <baseboard/ec.h>
+
+#endif
diff --git a/src/mainboard/google/reef/variants/pyro/include/variant/gpio.h b/src/mainboard/google/reef/variants/pyro/include/variant/gpio.h
new file mode 100644
index 0000000..6d1ce5a
--- /dev/null
+++ b/src/mainboard/google/reef/variants/pyro/include/variant/gpio.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_GPIO_H
+#define MAINBOARD_GPIO_H
+
+#include <baseboard/gpio.h>
+
+#endif /* MAINBOARD_GPIO_H */
diff --git a/src/mainboard/google/reef/variants/pyro/memory.c b/src/mainboard/google/reef/variants/pyro/memory.c
new file mode 100644
index 0000000..71ee060
--- /dev/null
+++ b/src/mainboard/google/reef/variants/pyro/memory.c
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <gpio.h>
+#include <soc/meminit.h>
+#include <variant/gpio.h>
+
+
+static const struct lpddr4_sku skus[] = {
+ /*
+ * K4F6E304HB-MGCJ - both logical channels While the parts
+ * are listed at 16Gb there are 2 ranks per channel so indicate
+ * the deneisty as 8Gb per rank.
+ */
+ [0] = {
+ .speed = LP4_SPEED_2400,
+ .ch0_rank_density = LP4_8Gb_DENSITY,
+ .ch1_rank_density = LP4_8Gb_DENSITY,
+ .ch0_dual_rank = 1,
+ .ch1_dual_rank = 1,
+ .part_num = "K4F6E304HB-MGCJ",
+ },
+ /* K4F8E304HB-MGCJ - both logical channels */
+ [1] = {
+ .speed = LP4_SPEED_2400,
+ .ch0_rank_density = LP4_8Gb_DENSITY,
+ .ch1_rank_density = LP4_8Gb_DENSITY,
+ .part_num = "K4F8E304HB-MGCJ",
+ },
+ /*
+ * MT53B512M32D2NP-062WT:C - both logical channels. While the parts
+ * are listed at 16Gb there are 2 ranks per channel so indicate
+ * the deneisty as 8Gb per rank.
+ */
+ [2] = {
+ .speed = LP4_SPEED_2400,
+ .ch0_rank_density = LP4_8Gb_DENSITY,
+ .ch1_rank_density = LP4_8Gb_DENSITY,
+ .ch0_dual_rank = 1,
+ .ch1_dual_rank = 1,
+ .part_num = "MT53B512M32D2NP",
+ .disable_periodic_retraining = 1,
+ },
+ /* MT53B256M32D1NP-062 WT:C - both logical channels */
+ [3] = {
+ .speed = LP4_SPEED_2400,
+ .ch0_rank_density = LP4_8Gb_DENSITY,
+ .ch1_rank_density = LP4_8Gb_DENSITY,
+ .part_num = "MT53B256M32D1NP",
+ .disable_periodic_retraining = 1,
+ },
+ /*
+ * H9HCNNNBPUMLHR-NLE - both logical channels. While the parts
+ * are listed at 16Gb there are 2 ranks per channel so indicate the
+ * density as 8Gb per rank.
+ */
+ [4] = {
+ .speed = LP4_SPEED_2400,
+ .ch0_rank_density = LP4_8Gb_DENSITY,
+ .ch1_rank_density = LP4_8Gb_DENSITY,
+ .ch0_dual_rank = 1,
+ .ch1_dual_rank = 1,
+ .part_num = "H9HCNNNBPUMLHR",
+ },
+ /* H9HCNNN8KUMLHR-NLE - both logical channels */
+ [5] = {
+ .speed = LP4_SPEED_2400,
+ .ch0_rank_density = LP4_8Gb_DENSITY,
+ .ch1_rank_density = LP4_8Gb_DENSITY,
+ .part_num = "H9HCNNN8KUMLHR",
+ },
+ /* Samsung 290 K4F6E304HB-MGCH 16Gb dual-ch */
+ [0xe] = {
+ .speed = LP4_SPEED_2400,
+ .ch0_rank_density = LP4_8Gb_DENSITY,
+ .ch1_rank_density = LP4_8Gb_DENSITY,
+ .ch0_dual_rank = 1,
+ .ch1_dual_rank = 1,
+ .part_num = "K4F6E304HB-MGCH",
+ },
+ /* Samsung 280 K4F8E304HB-MGCH 8Gb dual-ch */
+ [0xf] = {
+ .speed = LP4_SPEED_2400,
+ .ch0_rank_density = LP4_8Gb_DENSITY,
+ .ch1_rank_density = LP4_8Gb_DENSITY,
+ .ch0_dual_rank = 0,
+ .ch1_dual_rank = 0,
+ .part_num = "K4F8E304HB-MGCH",
+ },
+};
+
+static const struct lpddr4_cfg lp4cfg = {
+ .skus = skus,
+ .num_skus = ARRAY_SIZE(skus),
+ .swizzle_config = &baseboard_lpddr4_swizzle,
+};
+
+const struct lpddr4_cfg *variant_lpddr4_config(void)
+{
+ return &lp4cfg;
+}