src/acpi to src/lib: Fix spelling errors
These issues were found and fixed by codespell, a useful tool for
finding spelling errors.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I5b8ecdfe75d99028fee820a2034466a8ad1c5e63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58080
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/drivers/amd/agesa/cache_as_ram.S b/src/drivers/amd/agesa/cache_as_ram.S
index 1e15eda..0d678d1 100644
--- a/src/drivers/amd/agesa/cache_as_ram.S
+++ b/src/drivers/amd/agesa/cache_as_ram.S
@@ -5,7 +5,7 @@
*
* $Workfile:: cache_as_ram.S
*
- * Description: cache_as_ram.S - AGESA Module Entry Point for GCC complier
+ * Description: cache_as_ram.S - AGESA Module Entry Point for GCC compiler
*
******************************************************************************
*/
diff --git a/src/drivers/crb/tpm.c b/src/drivers/crb/tpm.c
index fcefe96..9c8f249 100644
--- a/src/drivers/crb/tpm.c
+++ b/src/drivers/crb/tpm.c
@@ -6,7 +6,7 @@
*
* TPM starts in IDLE Mode
*
- * IDLE --> READY --> Command Receiption
+ * IDLE --> READY --> Command Reception
* ^ |
* | v
-- Cmd Complete <-- Command Execution
diff --git a/src/drivers/generic/gpio_keys/chip.h b/src/drivers/generic/gpio_keys/chip.h
index 88dfe2e..01f4a12 100644
--- a/src/drivers/generic/gpio_keys/chip.h
+++ b/src/drivers/generic/gpio_keys/chip.h
@@ -81,7 +81,7 @@
struct acpi_gpio gpio;
/* Is this a polled GPIO button? - Optional */
bool is_polled;
- /* Poll inverval - Mandatory only if GPIO is polled. */
+ /* Poll interval - Mandatory only if GPIO is polled. */
uint32_t poll_interval;
/* Details about the key - Mandatory */
struct key_info key;
diff --git a/src/drivers/i2c/lm96000/chip.h b/src/drivers/i2c/lm96000/chip.h
index 128d1ec..bb86f4e 100644
--- a/src/drivers/i2c/lm96000/chip.h
+++ b/src/drivers/i2c/lm96000/chip.h
@@ -90,7 +90,7 @@
enum {
/* turn fan off below `low_temp - hysteresis` */
LM96000_LOW_TEMP_OFF = 0,
- /* keep PWM at mininum duty cycle */
+ /* keep PWM at minimum duty cycle */
LM96000_LOW_TEMP_MIN = 1,
} min_off;
u8 hysteresis;
diff --git a/src/drivers/i2c/nct7802y/chip.h b/src/drivers/i2c/nct7802y/chip.h
index 03c464a..c4a767d 100644
--- a/src/drivers/i2c/nct7802y/chip.h
+++ b/src/drivers/i2c/nct7802y/chip.h
@@ -37,7 +37,7 @@
enum nct7802y_fan_smartmode {
SMART_FAN_DUTY = 0, /* Target values given in duty cycle %. */
- SMART_FAN_RPM, /* Target valuse given in RPM. */
+ SMART_FAN_RPM, /* Target values given in RPM. */
};
enum nct7802y_fan_speed {
diff --git a/src/drivers/i2c/tpm/cr50.c b/src/drivers/i2c/tpm/cr50.c
index 8e12d1f..a8a310f 100644
--- a/src/drivers/i2c/tpm/cr50.c
+++ b/src/drivers/i2c/tpm/cr50.c
@@ -3,7 +3,7 @@
/* Based on Linux Kernel TPM driver */
/*
- * cr50 is a TPM 2.0 capable device that requries special
+ * cr50 is a TPM 2.0 capable device that requires special
* handling for the I2C interface.
*
* - Use an interrupt for transaction status instead of hardcoded delays
diff --git a/src/drivers/i2c/tpm/tpm.c b/src/drivers/i2c/tpm/tpm.c
index ee23ea7..b96099c 100644
--- a/src/drivers/i2c/tpm/tpm.c
+++ b/src/drivers/i2c/tpm/tpm.c
@@ -35,7 +35,7 @@
/* max. number of iterations after I2C NAK for 'long' commands
* we need this especially for sending TPM_READY, since the cleanup after the
- * transtion to the ready state may take some time, but it is unpredictable
+ * transition to the ready state may take some time, but it is unpredictable
* how long it will take.
*/
#define MAX_COUNT_LONG 50
diff --git a/src/drivers/i2c/ww_ring/ww_ring_programs.c b/src/drivers/i2c/ww_ring/ww_ring_programs.c
index 7576a3b..73dd4da 100644
--- a/src/drivers/i2c/ww_ring/ww_ring_programs.c
+++ b/src/drivers/i2c/ww_ring/ww_ring_programs.c
@@ -91,7 +91,7 @@
*
* When solid patterns are deployed with instanteneous color intensity
* changes, all three LEDs can be controlled by one engine in sequential
- * accesses. But the controllers still neeed to be synchronized.
+ * accesses. But the controllers still need to be synchronized.
*
* The maximum timer duration of lp55231 is .48 seconds. To achieve longer
* blinking intervals the loops delays are deployed. Only the first controller
diff --git a/src/drivers/i2c/ww_ring/ww_ring_programs.h b/src/drivers/i2c/ww_ring/ww_ring_programs.h
index 4f93651..47d1c77 100644
--- a/src/drivers/i2c/ww_ring/ww_ring_programs.h
+++ b/src/drivers/i2c/ww_ring/ww_ring_programs.h
@@ -21,7 +21,7 @@
#include <stdint.h>
#include "drivers/i2c/ww_ring/ww_ring.h"
-/* There are threee independent engines/cores in the controller. */
+/* There are three independent engines/cores in the controller. */
#define LP55231_NUM_OF_ENGINES 3
/* Number of lp55321 controllers on the ring */
@@ -29,7 +29,7 @@
/*
* Structure to describe an lp55231 program: pointer to the text of the
- * program, its size and load address (load addr + size sould not exceed
+ * program, its size and load address (load addr + size should not exceed
* LP55231_MAX_PROG_SIZE), and start addresses for all of the three
* engines.
*/
diff --git a/src/drivers/ipmi/ipmi_fru.c b/src/drivers/ipmi/ipmi_fru.c
index 976df1c..31ac6c0 100644
--- a/src/drivers/ipmi/ipmi_fru.c
+++ b/src/drivers/ipmi/ipmi_fru.c
@@ -525,7 +525,7 @@
if (prod_info.product_name != NULL)
printk(BIOS_DEBUG, "product name: %s\n", prod_info.product_name);
if (prod_info.product_partnumber != NULL)
- printk(BIOS_DEBUG, "product part numer: %s\n", prod_info.product_partnumber);
+ printk(BIOS_DEBUG, "product part number: %s\n", prod_info.product_partnumber);
if (prod_info.product_version != NULL)
printk(BIOS_DEBUG, "product version: %s\n", prod_info.product_version);
if (prod_info.serial_number != NULL)
diff --git a/src/drivers/ipmi/supermicro_oem.c b/src/drivers/ipmi/supermicro_oem.c
index 87b7fe2..9d5ffc7 100644
--- a/src/drivers/ipmi/supermicro_oem.c
+++ b/src/drivers/ipmi/supermicro_oem.c
@@ -26,7 +26,7 @@
int ret;
size_t i;
- /* Only 8 charactars are visible in UI. Cut of on first dash */
+ /* Only 8 characters are visible in UI. Cut of on first dash */
for (i = 0; i < 15; i++) {
if (coreboot_ver[i] == '-')
break;
diff --git a/src/drivers/net/Kconfig b/src/drivers/net/Kconfig
index 282075b..7e111f6 100644
--- a/src/drivers/net/Kconfig
+++ b/src/drivers/net/Kconfig
@@ -33,7 +33,7 @@
select REALTEK_8168_RESET
help
This is to set a customized LED mode to distinguish 10/100/1000
- link and speed status with limited LEDs avaiable on a board.
+ link and speed status with limited LEDs available on a board.
Please refer to RTL811x datasheet section 7.2 Customizable LED
Configuration for details. With this flag enabled, the
customized_leds variable will be read from devicetree setting.
diff --git a/src/drivers/net/atl1e.c b/src/drivers/net/atl1e.c
index 9b1b2ab..97ad140 100644
--- a/src/drivers/net/atl1e.c
+++ b/src/drivers/net/atl1e.c
@@ -127,7 +127,7 @@
/* Check if the base is invalid */
if (!mem_base) {
- printk(BIOS_ERR, "atl1e: Error cant find MEM resource\n");
+ printk(BIOS_ERR, "atl1e: Error can't find MEM resource\n");
return;
}
/* Enable but do not set bus master */
diff --git a/src/drivers/net/r8168.c b/src/drivers/net/r8168.c
index 398b15d..1fd6edd 100644
--- a/src/drivers/net/r8168.c
+++ b/src/drivers/net/r8168.c
@@ -280,7 +280,7 @@
/* Check if the base is invalid */
if (!io_base) {
- printk(BIOS_ERR, "r8168: Error cant find IO resource\n");
+ printk(BIOS_ERR, "r8168: Error can't find IO resource\n");
return;
}
/* Enable but do not set bus master */
diff --git a/src/drivers/spi/spi_sdcard.c b/src/drivers/spi/spi_sdcard.c
index a670111..0a18953 100644
--- a/src/drivers/spi/spi_sdcard.c
+++ b/src/drivers/spi/spi_sdcard.c
@@ -683,7 +683,7 @@
spi_sdcard_sendbyte(card, 0xff & (c >> 8));
spi_sdcard_sendbyte(card, 0xff & (c >> 0));
- /* recevie and verify data response token */
+ /* receive and verify data response token */
c = spi_sdcard_recvbyte(card);
if ((c & CT_RESPONSE_MASK) != CT_RESPONSE_ACCEPTED) {
spi_sdcard_disable_cs(card);
@@ -742,7 +742,7 @@
spi_sdcard_sendbyte(card, 0xff & (c >> 8));
spi_sdcard_sendbyte(card, 0xff & (c >> 0));
- /* recevie and verify data response token */
+ /* receive and verify data response token */
c = spi_sdcard_recvbyte(card);
if ((c & CT_RESPONSE_MASK) != CT_RESPONSE_ACCEPTED)
break;
diff --git a/src/drivers/spi/tpm/tpm.c b/src/drivers/spi/tpm/tpm.c
index 1ad1eaa..30b1876 100644
--- a/src/drivers/spi/tpm/tpm.c
+++ b/src/drivers/spi/tpm/tpm.c
@@ -3,7 +3,7 @@
*
* It assumes that the required SPI interface has been initialized before the
* driver is started. A 'sruct spi_slave' pointer passed at initialization is
- * used to direct traffic to the correct SPI interface. This dirver does not
+ * used to direct traffic to the correct SPI interface. This driver does not
* provide a way to instantiate multiple TPM devices. Also, to keep things
* simple, the driver unconditionally uses of TPM locality zero.
*
@@ -159,7 +159,7 @@
/*
* The first byte of the frame header encodes the transaction type
- * (read or write) and transfer size (set to lentgh - 1), limited to
+ * (read or write) and transfer size (set to length - 1), limited to
* 64 bytes.
*/
header.body[0] = (read_write ? 0x80 : 0) | 0x40 | (bytes - 1);
@@ -188,7 +188,7 @@
* the last clock of the byte) is set to 1.
*
* Due to some SPI controllers' shortcomings (Rockchip comes to
- * mind...) we trasmit the 4 byte header without checking the byte
+ * mind...) we transmit the 4 byte header without checking the byte
* transmitted by the TPM during the transaction's last byte.
*
* We know that cr50 is guaranteed to set the flow control bit to 0