soc/intel/broadwell: Re-do SerialIO UART console support
Use the same code from Lynx Point on Broadwell, and adjust as needed.
Also add a config file to ensure the code gets build-tested.
Tested on out-of-tree Compal LA-A992P (Haswell ULT), UART 0 works.
Change-Id: I527024098738700d5fbaf3e27cf4db331a0322bd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/src/soc/intel/broadwell/pch/Makefile.inc b/src/soc/intel/broadwell/pch/Makefile.inc
index 414c85c..1afa92b 100644
--- a/src/soc/intel/broadwell/pch/Makefile.inc
+++ b/src/soc/intel/broadwell/pch/Makefile.inc
@@ -30,7 +30,6 @@
ramstage-y += ../../../../southbridge/intel/lynxpoint/smbus.c
ramstage-y += smi.c
smm-y += smihandler.c
-romstage-$(CONFIG_DRIVERS_UART_8250MEM) += uart.c
bootblock-y += usb_debug.c
romstage-y += usb_debug.c
ramstage-y += usb_debug.c
@@ -38,4 +37,9 @@
ramstage-y += usb_xhci.c
smm-y += usb_xhci.c
+bootblock-$(CONFIG_SERIALIO_UART_CONSOLE) += ../../../../southbridge/intel/lynxpoint/iobp.c
+bootblock-$(CONFIG_SERIALIO_UART_CONSOLE) += ../../../../southbridge/intel/lynxpoint/uart_init.c
+all-$(CONFIG_SERIALIO_UART_CONSOLE) += ../../../../southbridge/intel/lynxpoint/uart.c
+smm-$(CONFIG_SERIALIO_UART_CONSOLE) += ../../../../southbridge/intel/lynxpoint/uart.c
+
ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/hda_verb.c
diff --git a/src/soc/intel/broadwell/pch/bootblock.c b/src/soc/intel/broadwell/pch/bootblock.c
index d00a431..2f76111 100644
--- a/src/soc/intel/broadwell/pch/bootblock.c
+++ b/src/soc/intel/broadwell/pch/bootblock.c
@@ -105,6 +105,9 @@
RCBA32_OR(FD, PCH_DISABLE_ALWAYS);
}
+/* Defined in Lynx Point code */
+void uart_bootblock_init(void);
+
void bootblock_early_southbridge_init(void)
{
map_rcba();
@@ -112,4 +115,7 @@
enable_port80_on_lpc();
set_spi_speed();
pch_early_lpc();
+
+ if (CONFIG(SERIALIO_UART_CONSOLE))
+ uart_bootblock_init();
}
diff --git a/src/soc/intel/broadwell/pch/lpc.c b/src/soc/intel/broadwell/pch/lpc.c
index e32ae36..4b4aa9f 100644
--- a/src/soc/intel/broadwell/pch/lpc.c
+++ b/src/soc/intel/broadwell/pch/lpc.c
@@ -604,11 +604,12 @@
unsigned long current,
struct acpi_rsdp *rsdp)
{
- if (CONFIG(INTEL_PCH_UART_CONSOLE))
+ if (CONFIG(SERIALIO_UART_CONSOLE)) {
current = acpi_write_dbg2_pci_uart(rsdp, current,
- (CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1) ?
+ (CONFIG_UART_FOR_CONSOLE == 1) ?
PCH_DEV_UART1 : PCH_DEV_UART0,
- ACPI_ACCESS_SIZE_BYTE_ACCESS);
+ ACPI_ACCESS_SIZE_DWORD_ACCESS);
+ }
return acpi_write_hpet(device, current, rsdp);
}
diff --git a/src/soc/intel/broadwell/pch/serialio.c b/src/soc/intel/broadwell/pch/serialio.c
index fa61b91..5035987 100644
--- a/src/soc/intel/broadwell/pch/serialio.c
+++ b/src/soc/intel/broadwell/pch/serialio.c
@@ -15,6 +15,7 @@
#include <soc/serialio.h>
#include <soc/intel/broadwell/pch/chip.h>
#include <southbridge/intel/lynxpoint/iobp.h>
+#include <types.h>
/* Set D3Hot Power State in ACPI mode */
static void serialio_enable_d3hot(struct resource *res)
@@ -24,17 +25,17 @@
write32(res2mmio(res, PCH_PCS, 0), reg32);
}
-static int serialio_uart_is_debug(struct device *dev)
+static bool serialio_uart_is_debug(struct device *dev)
{
-#if CONFIG(INTEL_PCH_UART_CONSOLE)
- switch (dev->path.pci.devfn) {
- case PCH_DEVFN_UART0: /* UART0 */
- return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 0);
- case PCH_DEVFN_UART1: /* UART1 */
- return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1);
+ if (CONFIG(SERIALIO_UART_CONSOLE)) {
+ switch (dev->path.pci.devfn) {
+ case PCH_DEVFN_UART0:
+ return CONFIG_UART_FOR_CONSOLE == 0;
+ case PCH_DEVFN_UART1:
+ return CONFIG_UART_FOR_CONSOLE == 1;
+ }
}
-#endif
- return 0;
+ return false;
}
/* Enable clock in PCI mode */
@@ -239,33 +240,33 @@
dev_nvs->bar0[sio_index] = (u32)bar0->base;
dev_nvs->bar1[sio_index] = (u32)bar1->base;
- /* Do not enable UART if it is used as debug port */
- if (!serialio_uart_is_debug(dev))
+ if (!serialio_uart_is_debug(dev)) {
+ /* Do not enable UART if it is used as debug port */
dev_nvs->enable[sio_index] = 1;
- /* Put device in D3hot state via BAR1 */
- if (dev->path.pci.devfn != PCH_DEVFN_SDMA)
- serialio_enable_d3hot(bar1); /* all but SDMA */
+ /* Put device in D3hot state via BAR1 */
+ if (dev->path.pci.devfn != PCH_DEVFN_SDMA)
+ serialio_enable_d3hot(bar1); /* all but SDMA */
+ }
}
}
-static void serialio_set_resources(struct device *dev)
+static void serialio_read_resources(struct device *dev)
{
- pci_dev_set_resources(dev);
+ pci_dev_read_resources(dev);
-#if CONFIG(INTEL_PCH_UART_CONSOLE)
- /* Update UART base address if used for debug */
- if (serialio_uart_is_debug(dev)) {
+ /* Set the configured UART base address for the debug port */
+ if (CONFIG(SERIALIO_UART_CONSOLE) && serialio_uart_is_debug(dev)) {
struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res)
- uartmem_setbaseaddr(res->base);
+ res->base = CONFIG_CONSOLE_UART_BASE_ADDRESS;
+ res->size = 0x1000;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}
-#endif
}
static struct device_operations device_ops = {
- .read_resources = &pci_dev_read_resources,
- .set_resources = &serialio_set_resources,
+ .read_resources = &serialio_read_resources,
+ .set_resources = &pci_dev_set_resources,
.enable_resources = &pci_dev_enable_resources,
.init = &serialio_init,
.ops_pci = &pci_dev_ops_pci,
diff --git a/src/soc/intel/broadwell/pch/uart.c b/src/soc/intel/broadwell/pch/uart.c
deleted file mode 100644
index 6b0da2d..0000000
--- a/src/soc/intel/broadwell/pch/uart.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <device/pci_def.h>
-#include <reg_script.h>
-#include <stdint.h>
-#include <uart8250.h>
-#include <soc/iobp.h>
-#include <soc/serialio.h>
-
-const struct reg_script uart_init[] = {
- /* Set MMIO BAR */
- REG_PCI_WRITE32(PCI_BASE_ADDRESS_0, CONFIG_TTYS0_BASE),
- /* Enable Memory access and Bus Master */
- REG_PCI_OR32(PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER),
- /* Initialize LTR */
- REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_GEN,
- ~SIO_REG_PPR_GEN_LTR_MODE_MASK, 0),
- REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST,
- ~(SIO_REG_PPR_RST_ASSERT), 0),
- /* Take UART out of reset */
- REG_MMIO_OR32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST,
- SIO_REG_PPR_RST_ASSERT),
- /* Set M and N divisor inputs and enable clock */
- REG_MMIO_WRITE32(CONFIG_TTYS0_BASE + SIO_REG_PPR_CLOCK,
- SIO_REG_PPR_CLOCK_EN | SIO_REG_PPR_CLOCK_UPDATE |
- (SIO_REG_PPR_CLOCK_N_DIV << 16) |
- (SIO_REG_PPR_CLOCK_M_DIV << 1)),
- REG_SCRIPT_END
-};
-
-void pch_uart_init(void)
-{
- /* Program IOBP CB000154h[12,9:8,4:0] = 1001100011111b */
- u32 gpiodf = 0x131f;
-#if defined(__SIMPLE_DEVICE__)
- pci_devfn_t dev;
-#else
- struct device *dev;
-#endif
-
- /* Put UART in byte access mode for 16550 compatibility */
- switch (CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER) {
- case 0:
- dev = PCH_DEV_UART0;
- gpiodf |= SIO_IOBP_GPIODF_UART0_BYTE_ACCESS;
- break;
- case 1:
- dev = PCH_DEV_UART1;
- gpiodf |= SIO_IOBP_GPIODF_UART1_BYTE_ACCESS;
- break;
- default:
- return;
- }
-
- /* Program IOBP GPIODF */
- pch_iobp_update(SIO_IOBP_GPIODF, ~gpiodf, gpiodf);
-
- /* Program IOBP CB000180h[5:0] = 111111b (undefined register) */
- pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f);
-
- /* Initialize chipset uart interface */
- reg_script_run_on_dev(dev, uart_init);
-
- /*
- * Perform standard UART initialization
- * Divisor 1 is 115200 BAUD
- */
- uart8250_mem_init(CONFIG_TTYS0_BASE, 1);
-}