mb/google/volteer: Convert static ASL files to new DPTF implementation
This patch converts the current DPTF policies from static ASL files into
the new SSDT-based DPTF implementation. All settings are intended to be
copied exactly.
Change-Id: I964c53afbd503d47a07b982672425f0e7a986a3f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41895
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb
index 88aff01..322389d 100644
--- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb
@@ -282,7 +282,88 @@
#From EDS(575683)
device pci 00.0 on end # Host Bridge 0x9A14:U/0x9A12:Y
device pci 02.0 on end # Graphics
- device pci 04.0 on end # DPTF 0x9A03
+ device pci 04.0 on
+ # Default DPTF Policy for all Volteer boards if not overridden
+ chip drivers/intel/dptf
+ ## Active Policy
+ register "policies.active[0]" = "{.target=DPTF_CPU,
+ .thresholds={TEMP_PCT(85, 90),
+ TEMP_PCT(80, 69),
+ TEMP_PCT(75, 56),
+ TEMP_PCT(70, 46),
+ TEMP_PCT(65, 36),}}"
+ register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0,
+ .thresholds={TEMP_PCT(50, 90),
+ TEMP_PCT(47, 69),
+ TEMP_PCT(45, 56),
+ TEMP_PCT(42, 46),
+ TEMP_PCT(39, 36),}}"
+ register "policies.active[2]" = "{.target=DPTF_TEMP_SENSOR_1,
+ .thresholds={TEMP_PCT(50, 90),
+ TEMP_PCT(47, 69),
+ TEMP_PCT(45, 56),
+ TEMP_PCT(42, 46),
+ TEMP_PCT(39, 36),}}"
+ register "policies.active[3]" = "{.target=DPTF_TEMP_SENSOR_2,
+ .thresholds={TEMP_PCT(50, 90),
+ TEMP_PCT(47, 69),
+ TEMP_PCT(45, 56),
+ TEMP_PCT(42, 46),
+ TEMP_PCT(39, 36),}}"
+
+ ## Passive Policy
+ register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 5000)"
+ register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 65, 6000)"
+ register "policies.passive[2]" = "DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 65, 6000)"
+ register "policies.passive[3]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 65, 6000)"
+
+ ## Critical Policy
+ register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 105, SHUTDOWN)"
+ register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN)"
+ register "policies.critical[2]" = "DPTF_CRITICAL(TEMP_SENSOR_1, 75, SHUTDOWN)"
+ register "policies.critical[3]" = "DPTF_CRITICAL(TEMP_SENSOR_2, 75, SHUTDOWN)"
+
+ ## Power Limits Control
+ # 10-15W PL1 in 200mW increments, avg over 28-32s interval
+ # PL2 is fixed at 64W, avg over 28-32s interval
+ register "controls.power_limits.pl1" = "{
+ .min_power = 3000,
+ .max_power = 15000,
+ .time_window_min = 28 * MSECS_PER_SEC,
+ .time_window_max = 32 * MSECS_PER_SEC,
+ .granularity = 200,}"
+ register "controls.power_limits.pl2" = "{
+ .min_power = 15000,
+ .max_power = 60000,
+ .time_window_min = 28 * MSECS_PER_SEC,
+ .time_window_max = 32 * MSECS_PER_SEC,
+ .granularity = 1000,}"
+
+ ## Charger Performance Control (Control, mA)
+ register "controls.charger_perf[0]" = "{ 255, 1700 }"
+ register "controls.charger_perf[1]" = "{ 24, 1500 }"
+ register "controls.charger_perf[2]" = "{ 16, 1000 }"
+ register "controls.charger_perf[3]" = "{ 8, 500 }"
+
+ ## Fan Performance Control (Percent, Speed, Noise, Power)
+ register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }"
+ register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }"
+ register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }"
+ register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }"
+ register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }"
+ register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }"
+ register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }"
+ register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }"
+ register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }"
+ register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }"
+
+ # Fan options
+ register "options.fan.fine_grained_control" = "1"
+ register "options.fan.step_size" = "2"
+
+ device generic 0 on end
+ end
+ end # DPTF 0x9A03
device pci 05.0 off end # IPU 0x9A19
device pci 06.0 off end # PEG60 0x9A09
device pci 07.0 on end # TBT_PCIe0 0x9A23