diff --git a/src/soc/intel/elkhartlake/pmc.c b/src/soc/intel/elkhartlake/pmc.c
new file mode 100644
index 0000000..57f26d9
--- /dev/null
+++ b/src/soc/intel/elkhartlake/pmc.c
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <bootstate.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/mmio.h>
+#include <intelblocks/pmc.h>
+#include <intelblocks/pmclib.h>
+#include <intelblocks/rtc.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+
+/*
+ * Set which power state system will be after reapplying
+ * the power (from G3 State)
+ */
+void pmc_soc_set_afterg3_en(const bool on)
+{
+	uint8_t reg8;
+	uint8_t *const pmcbase = pmc_mmio_regs();
+
+	reg8 = read8(pmcbase + GEN_PMCON_A);
+	if (on)
+		reg8 &= ~SLEEP_AFTER_POWER_FAIL;
+	else
+		reg8 |= SLEEP_AFTER_POWER_FAIL;
+	write8(pmcbase + GEN_PMCON_A, reg8);
+}
+
+static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
+{
+	uint32_t reg;
+	uint8_t *pmcbase = pmc_mmio_regs();
+
+	printk(BIOS_DEBUG, "%sabling Deep S%c\n",
+		enable ? "En" : "Dis", sx + '0');
+	reg = read32(pmcbase + offset);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	write32(pmcbase + offset, reg);
+}
+
+static void config_deep_s5(int on_ac, int on_dc)
+{
+	/* Treat S4 the same as S5. */
+	config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac);
+	config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc);
+	config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac);
+	config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc);
+}
+
+static void config_deep_s3(int on_ac, int on_dc)
+{
+	config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac);
+	config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc);
+}
+
+static void config_deep_sx(uint32_t deepsx_config)
+{
+	uint32_t reg;
+	uint8_t *pmcbase = pmc_mmio_regs();
+
+	reg = read32(pmcbase + DSX_CFG);
+	reg &= ~DSX_CFG_MASK;
+	reg |= deepsx_config;
+	write32(pmcbase + DSX_CFG, reg);
+}
+
+static void pmc_init(struct device *dev)
+{
+	const config_t *config = config_of_soc();
+
+	rtc_init();
+
+	pmc_set_power_failure_state(true);
+	pmc_gpe_init();
+
+	config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc);
+	config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc);
+	config_deep_sx(config->deep_sx_config);
+}
+
+static void soc_pmc_read_resources(struct device *dev)
+{
+	struct resource *res;
+
+	mmio_resource(dev, 0, PCH_PWRM_BASE_ADDRESS / KiB, PCH_PWRM_BASE_SIZE / KiB);
+
+	res = new_resource(dev, 1);
+	res->base = (resource_t)ACPI_BASE_ADDRESS;
+	res->size = (resource_t)ACPI_BASE_SIZE;
+	res->limit = res->base + res->size + 1;
+	res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
+}
+
+static void soc_acpi_mode_init(struct device *dev)
+{
+	/*
+	 * pmc_set_acpi_mode() should be delayed until BS_DEV_INIT in order
+	 * to ensure the ordering does not break the assumptions that other
+	 * drivers make about ACPI mode (e.g. Chrome EC). Since it disables
+	 * ACPI mode, other drivers may take different actions based on this
+	 * (e.g. Chrome EC will flush any pending hostevent bits). Because
+	 * EHL has its PMC device available for device_operations, it can be
+	 * done from the "ops->init" callback.
+	 */
+	pmc_set_acpi_mode();
+}
+
+struct device_operations pmc_ops = {
+	.read_resources		= soc_pmc_read_resources,
+	.set_resources		= noop_set_resources,
+	.init			= soc_acpi_mode_init,
+	.enable			= pmc_init,
+};