soc/intel/elkhartlake: Do initial SoC commit till ramstage
Clone entirely from Jasperlake
List of changes on top off initial jasperlake clone
1. Replace "Jasperlake" with "Elkhartlake"
2. Replace "jsl" with "ehl"
3. Replace "jsp" with "mcc"
4. Rename structure based on Jasperlake with Elkhartlake
5. Clean up upd override in fsp_params.c will be added later
6. Sort #include files alphabetically as per comment
7. Remove doc details from espi.c until it is ready
8. Remove pch_isclk & camera clocks related codes
9. Add new #define NMI_STS_CNT & NMI_EN as per comment
Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: I372b0bb5912e013445ed8df7c58d0a9ee9a7cf35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
diff --git a/src/soc/intel/elkhartlake/finalize.c b/src/soc/intel/elkhartlake/finalize.c
new file mode 100644
index 0000000..e9b3f21
--- /dev/null
+++ b/src/soc/intel/elkhartlake/finalize.c
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <arch/io.h>
+#include <bootstate.h>
+#include <console/console.h>
+#include <console/post_codes.h>
+#include <cpu/x86/smm.h>
+#include <device/mmio.h>
+#include <device/pci.h>
+#include <intelblocks/lpc_lib.h>
+#include <intelblocks/pcr.h>
+#include <intelblocks/tco.h>
+#include <intelblocks/thermal.h>
+#include <soc/p2sb.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+#include <soc/pm.h>
+#include <soc/smbus.h>
+#include <soc/soc_chip.h>
+#include <soc/systemagent.h>
+#include <spi-generic.h>
+
+static void pch_finalize(void)
+{
+ uint32_t reg32;
+ uint8_t *pmcbase;
+ config_t *config;
+ uint8_t reg8;
+
+ /* TCO Lock down */
+ tco_lockdown();
+
+ /* TODO: Add Thermal Configuration */
+
+ /*
+ * Disable ACPI PM timer based on dt policy
+ *
+ * Disabling ACPI PM timer is necessary for XTAL OSC shutdown.
+ * Disabling ACPI PM timer also switches off TCO
+ *
+ * SA_DEV_ROOT device is used here instead of PCH_DEV_PMC since it is
+ * just required to get to chip config. PCH_DEV_PMC is hidden by this
+ * point and hence removed from the root bus. pcidev_path_on_root thus
+ * returns NULL for PCH_DEV_PMC device.
+ */
+ config = config_of_soc();
+ pmcbase = pmc_mmio_regs();
+ if (config->PmTimerDisabled) {
+ reg8 = read8(pmcbase + PCH_PWRM_ACPI_TMR_CTL);
+ reg8 |= (1 << 1);
+ write8(pmcbase + PCH_PWRM_ACPI_TMR_CTL, reg8);
+ }
+
+ /* Disable XTAL shutdown qualification for low power idle. */
+ if (config->s0ix_enable) {
+ reg32 = read32(pmcbase + CPPMVRIC);
+ reg32 |= XTALSDQDIS;
+ write32(pmcbase + CPPMVRIC, reg32);
+ }
+
+ pmc_clear_pmcon_sts();
+}
+
+static void soc_finalize(void *unused)
+{
+ printk(BIOS_DEBUG, "Finalizing chipset.\n");
+
+ pch_finalize();
+ apm_control(APM_CNT_FINALIZE);
+
+ /* Indicate finalize step with post code */
+ post_code(POST_OS_BOOT);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, soc_finalize, NULL);
+BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, soc_finalize, NULL);