mb/google/poppy: Use chipset dt reference names
Use the references from the chipset devicetree as this makes the
comments superfluous.
Built all variants with BUILD_TIMELESS=1 and the resulting binaries
remain the same.
Change-Id: I22bcde2dea726f47f8d64a762ca147efde0b610d
Signed-off-by: Marvin Evers <marvin.evers@stud.hs-bochum.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
diff --git a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
index 6cc1f8e..4cbc045 100644
--- a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
@@ -282,15 +282,15 @@
device cpu_cluster 0 on end
device domain 0 on
- device pci 00.0 on end # Host Bridge
- device pci 02.0 on end # Integrated Graphics Device
- device pci 04.0 on end # SA thermal subsystem
- device pci 05.0 on end # SA IMGU
- device pci 14.0 on end # USB xHCI
- device pci 14.1 on end # USB xDCI (OTG)
- device pci 14.2 on end # Thermal Subsystem
- device pci 14.3 on end # Camera
- device pci 15.0 on
+ device ref system_agent on end
+ device ref igpu on end
+ device ref sa_thermal on end
+ device ref imgu on end
+ device ref south_xhci on end
+ device ref south_xdci on end
+ device ref thermal on end
+ device ref cio on end
+ device ref i2c0 on
chip drivers/i2c/hid
register "generic.hid" = ""SYTS7813""
register "generic.desc" = ""Synaptics Touchscreen""
@@ -302,15 +302,15 @@
register "hid_desc_reg_offset" = "0x20"
device i2c 20 on end
end
- end # I2C #0
- device pci 15.1 on
+ end
+ device ref i2c1 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)"
device i2c 50 on end
end
- end # I2C #1
- device pci 15.2 on
+ end
+ device ref i2c2 on
chip drivers/i2c/generic
register "hid" = ""STH9321""
register "name" = ""SEMTECH SX9321""
@@ -319,8 +319,8 @@
register "device_present_gpio" = "GPP_B20"
device i2c 28 on end
end
- end # I2C #2
- device pci 15.3 on
+ end
+ device ref i2c3 on
chip drivers/i2c/hid
register "generic.hid" = ""ACPI0C50""
register "generic.cid" = ""PNP0C50""
@@ -343,15 +343,15 @@
register "key.wakeup_route" = "WAKEUP_ROUTE_DISABLED"
device generic 0 on end
end
- end # I2C #3
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT Redirection
- device pci 16.4 off end # Management Engine Interface 3
- device pci 17.0 off end # SATA
- device pci 19.0 on end # UART #2
- device pci 19.1 on
+ end
+ device ref heci1 on end
+ device ref heci2 off end
+ device ref csme_ider off end
+ device ref csme_ktr off end
+ device ref heci3 off end
+ device ref sata off end
+ device ref uart2 on end
+ device ref i2c5 on
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A23)"
@@ -375,8 +375,8 @@
register "mic_amp_in_sel" = ""diff""
device i2c 1A on end
end
- end # I2C #5
- device pci 19.2 on
+ end
+ device ref i2c4 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
@@ -384,41 +384,41 @@
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
- end # I2C #4
- device pci 1c.0 on
+ end
+ device ref pcie_rp1 on
chip drivers/wifi/generic
register "wake" = "GPE0_DW0_00"
device pci 00.0 on end
end
- end # PCI Express Port 1
- device pci 1c.1 off end # PCI Express Port 2
- device pci 1c.2 off end # PCI Express Port 3
- device pci 1c.3 off end # PCI Express Port 4
- device pci 1c.4 off end # PCI Express Port 5
- device pci 1c.5 off end # PCI Express Port 6
- device pci 1c.6 off end # PCI Express Port 7
- device pci 1c.7 off end # PCI Express Port 8
- device pci 1d.0 off end # PCI Express Port 9
- device pci 1d.1 off end # PCI Express Port 10
- device pci 1d.2 off end # PCI Express Port 11
- device pci 1d.3 off end # PCI Express Port 12
- device pci 1e.0 on end # UART #0
- device pci 1e.1 off end # UART #1
- device pci 1e.2 off end # GSPI #0
- device pci 1e.3 off end # GSPI #1
- device pci 1e.4 on end # eMMC
- device pci 1e.5 off end # SDIO
- device pci 1e.6 on end # SDCard
- device pci 1f.0 on
+ end
+ device ref pcie_rp2 off end
+ device ref pcie_rp3 off end
+ device ref pcie_rp4 off end
+ device ref pcie_rp5 off end
+ device ref pcie_rp6 off end
+ device ref pcie_rp7 off end
+ device ref pcie_rp8 off end
+ device ref pcie_rp9 off end
+ device ref pcie_rp10 off end
+ device ref pcie_rp11 off end
+ device ref pcie_rp12 off end
+ device ref uart0 on end
+ device ref uart1 off end
+ device ref gspi0 off end
+ device ref gspi1 off end
+ device ref emmc on end
+ device ref sdio off end
+ device ref sdxc on end
+ device ref lpc_espi on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
- end # LPC Interface
- device pci 1f.1 on end # P2SB
- device pci 1f.2 on end # Power Management Controller
- device pci 1f.3 on end # Intel HDA
- device pci 1f.4 on end # SMBus
- device pci 1f.5 on end # PCH SPI
- device pci 1f.6 off end # GbE
+ end
+ device ref p2sb on end
+ device ref pmc on end
+ device ref hda on end
+ device ref smbus on end
+ device ref fast_spi on end
+ device ref gbe off end
end
end