Kconfig!
Works on Kontron, qemu, and serengeti.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
tested on abuild only.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/util/abuild/abuild b/util/abuild/abuild
index 5aacd69..15329e8 100755
--- a/util/abuild/abuild
+++ b/util/abuild/abuild
@@ -103,7 +103,7 @@
{
# make this a function so we can easily select
# without breaking readability
- ls -1 "$LBROOT/src/mainboard" | grep -v CVS
+ ls -1 "$LBROOT/src/mainboard" | grep -v Kconfig
}
function mainboards
@@ -113,7 +113,7 @@
VENDOR=$1
- ls -1 $LBROOT/src/mainboard/$VENDOR | grep -v CVS
+ ls -1 $LBROOT/src/mainboard/$VENDOR | grep -v Kconfig
}
function architecture
diff --git a/util/cbfstool/Makefile.inc b/util/cbfstool/Makefile.inc
new file mode 100644
index 0000000..3350646
--- /dev/null
+++ b/util/cbfstool/Makefile.inc
@@ -0,0 +1,39 @@
+#
+#
+#
+
+ifdef POST_EVALUATION
+
+cbfsobj :=
+# commands
+cbfsobj += create.o
+cbfsobj += bootblock.o
+cbfsobj += delete.o
+cbfsobj += extract.o
+cbfsobj += add.o
+cbfsobj += print.o
+cbfsobj += resize.o
+# main tool
+cbfsobj += cbfstool.o
+cbfsobj += util.o
+cbfsobj += fs.o
+
+cbfsinc := cbfstool.h cbfs.h
+
+$(obj)/util/cbfstool:
+ $(Q)mkdir -p $@
+ $(Q)mkdir -p $@/tools/lzma
+
+$(obj)/util/cbfstool/%.o: $(top)/util/cbfstool/%.c
+ $(Q)printf " HOSTCC $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) -c -o $@ $<
+
+$(obj)/util/cbfstool/cbfstool: $(obj)/util/cbfstool $(obj)/util/cbfstool/tools/cbfs-mkpayload $(obj)/util/cbfstool/tools/cbfs-mkstage $(addprefix $(obj)/util/cbfstool/,$(cbfsobj))
+ $(Q)printf " HOSTCC $(subst $(obj)/,,$(@)) (link)\n"
+ $(Q)$(HOSTCC) -o $@ $(addprefix $(obj)/util/cbfstool/,$(cbfsobj))
+
+endif
+
+include $(top)/util/cbfstool/tools/Makefile.inc
+
+
diff --git a/util/cbfstool/tools/Makefile.inc b/util/cbfstool/tools/Makefile.inc
new file mode 100644
index 0000000..4aed0c4
--- /dev/null
+++ b/util/cbfstool/tools/Makefile.inc
@@ -0,0 +1,23 @@
+
+tobj ?= $(obj)/util/cbfstool/tools
+tsrc ?= $(top)/util/cbfstool/tools
+
+include $(tsrc)/lzma/Makefile.inc
+
+COMMON = common.o compress.o $(LZMA_OBJ)
+
+ifdef POST_EVALUATION
+
+$(tobj)/cbfs-mkstage: $(tobj)/cbfs-mkstage.o $(patsubst %,$(tobj)/%,$(COMMON))
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@)) (link)\n"
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ $^
+
+$(tobj)/cbfs-mkpayload: $(tobj)/cbfs-mkpayload.o $(patsubst %,$(tobj)/%,$(COMMON))
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@)) (link)\n"
+ $(Q)$(HOSTCXX) $(HOSTCFLAGS) -o $@ $^
+
+$(tobj)/%.o: $(tsrc)/%.c
+ $(Q)printf " HOSTCC $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) -c -o $@ $<
+
+endif
diff --git a/util/cbfstool/tools/lzma/Makefile.inc b/util/cbfstool/tools/lzma/Makefile.inc
new file mode 100644
index 0000000..1a0d276
--- /dev/null
+++ b/util/cbfstool/tools/lzma/Makefile.inc
@@ -0,0 +1,60 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+LZMA_OBJ := lzma/LZMAEncoder.o lzma/LZInWindow.o
+LZMA_OBJ += lzma/RangeCoderBit.o lzma/StreamUtils.o
+LZMA_OBJ += lzma/OutBuffer.o lzma/Alloc.o
+LZMA_OBJ += lzma/CRC.o
+LZMA_OBJ += lzma/lzma-compress.o
+
+ifdef POST_EVALUATION
+$(tobj)/lzma/lzma-compress.o: $(tsrc)/lzma/minilzma.cc
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ -c -DCOMPACT $<
+
+$(tobj)/lzma/%.o: $(tsrc)/lzma/C/7zip/Compress/LZMA/%.cpp
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ -c $<
+
+$(tobj)/lzma/%.o: $(tsrc)/lzma/C/7zip/Compress/LZ/%.cpp
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ -c $<
+
+$(tobj)/lzma/%.o: $(tsrc)/lzma/C/7zip/Compress/RangeCoder/%.cpp
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ -c $<
+
+$(tobj)/lzma/%.o: $(tsrc)/lzma/C/7zip/Decompress/%.cpp
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ -c $<
+
+$(tobj)/lzma/%.o: $(tsrc)/lzma/C/7zip/Common/%.cpp
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ -c $<
+
+$(tobj)/lzma/%.o: $(tsrc)/lzma/C/Common/%.cpp
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ -c $<
+
+$(tobj)/lzma/%.o: $(tsrc)/lzma/%.cc
+ $(Q)printf " HOSTCXX $(subst $(obj)/,,$(@))\n"
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) -o $@ -c $<
+
+endif
diff --git a/util/kconfig/Makefile b/util/kconfig/Makefile
new file mode 100644
index 0000000..266586e4
--- /dev/null
+++ b/util/kconfig/Makefile
@@ -0,0 +1,337 @@
+# ===========================================================================
+# Kernel configuration targets
+# These targets are used from top-level makefile
+
+PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config
+
+Kconfig := src/Kconfig
+
+xconfig: prepare $(objk)/qconf
+ $(Q)$(objk)/qconf $(Kconfig)
+
+gconfig: prepare $(objk)/gconf
+ $(Q)$(objk)/gconf $(Kconfig)
+
+menuconfig: prepare $(objk)/mconf
+ $(Q)$(objk)/mconf $(Kconfig)
+
+config: prepare $(objk)/conf
+ $(Q)$(objk)/conf $(Kconfig)
+
+oldconfig: prepare $(objk)/conf
+ $(Q)$(objk)/conf -o $(Kconfig)
+
+silentoldconfig: prepare $(objk)/conf
+ $(Q)$(objk)/conf -s $(Kconfig)
+
+# --- UNUSED, ignore ----------------------------------------------------------
+# Create new linux.pot file
+# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
+# The symlink is used to repair a deficiency in arch/um
+update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
+ $(Q)echo " GEN config"
+ $(Q)xgettext --default-domain=linux \
+ --add-comments --keyword=_ --keyword=N_ \
+ --from-code=UTF-8 \
+ --files-from=scripts/kconfig/POTFILES.in \
+ --output $(obj)/config.pot
+ $(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
+ $(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch
+ $(Q)(for i in `ls arch/`; \
+ do \
+ echo " GEN $$i"; \
+ $(obj)/kxgettext arch/$$i/Kconfig \
+ >> $(obj)/config.pot; \
+ done )
+ $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
+ --output $(obj)/linux.pot
+ $(Q)rm -f arch/um/Kconfig.arch
+ $(Q)rm -f $(obj)/config.pot
+# --- UNUSED, ignore ----------------------------------------------------------
+
+PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
+
+randconfig: prepare $(objk)/conf
+ $(Q)$(objk)/conf -r $(Kconfig)
+
+allyesconfig: prepare $(objk)/conf
+ $(Q)$(objk)/conf -y $(Kconfig)
+
+allnoconfig: prepare $(objk)/conf
+ $(Q)$(objk)/conf -n $(Kconfig)
+
+allmodconfig: prepare $(objk)/conf
+ $(Q)$(objk)/conf -m $(Kconfig)
+
+defconfig: prepare $(objk)/conf
+ifeq ($(KBUILD_DEFCONFIG),)
+ $(Q)$(objk)/conf -d $(Kconfig)
+else
+ @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
+ $(Q)$(objk)/conf -D $(KBUILD_DEFCONFIG) $(Kconfig)
+endif
+
+%_defconfig: prepare $(objk)/conf
+ $(Q)$(objk)/conf -D configs/$@ $(Kconfig)
+
+# Help text used by make help
+help:
+ @echo ' config - Update current config utilising a line-oriented program'
+ @echo ' menuconfig - Update current config utilising a menu based program'
+ @echo ' xconfig - Update current config utilising a QT based front-end'
+ @echo ' gconfig - Update current config utilising a GTK based front-end'
+ @echo ' oldconfig - Update current config utilising a provided .config as base'
+ @echo ' silentoldconfig - Same as oldconfig, but quietly'
+ @echo ' randconfig - New config with random answer to all options'
+ @echo ' defconfig - New config with default answer to all options'
+ @echo ' allmodconfig - New config selecting modules when possible'
+ @echo ' allyesconfig - New config where all options are accepted with yes'
+ @echo ' allnoconfig - New config where all options are answered with no'
+
+# lxdialog stuff
+check-lxdialog := $(srck)/lxdialog/check-lxdialog.sh
+
+# Use recursively expanded variables so we do not call gcc unless
+# we really need to do so. (Do not call gcc as part of make mrproper)
+HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
+
+HOST_EXTRACFLAGS += -DLOCALE
+
+
+# ===========================================================================
+# Shared Makefile for the various kconfig executables:
+# conf: Used for defconfig, oldconfig and related targets
+# mconf: Used for the mconfig target.
+# Utilizes the lxdialog package
+# qconf: Used for the xconfig target
+# Based on QT which needs to be installed to compile it
+# gconf: Used for the gconfig target
+# Based on GTK which needs to be installed to compile it
+# object files used by all kconfig flavours
+
+lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
+lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
+
+conf-objs := conf.o zconf.tab.o
+mconf-objs := mconf.o zconf.tab.o $(lxdialog)
+kxgettext-objs := kxgettext.o zconf.tab.o
+
+hostprogs-y := conf qconf gconf kxgettext
+
+ifeq ($(MAKECMDGOALS),menuconfig)
+ hostprogs-y += mconf
+endif
+
+ifeq ($(MAKECMDGOALS),xconfig)
+ qconf-target := 1
+endif
+ifeq ($(MAKECMDGOALS),gconfig)
+ gconf-target := 1
+endif
+
+
+ifeq ($(qconf-target),1)
+qconf-cxxobjs := qconf.o
+qconf-objs := kconfig_load.o zconf.tab.o
+endif
+
+ifeq ($(gconf-target),1)
+gconf-objs := gconf.o kconfig_load.o zconf.tab.o
+endif
+
+clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
+ .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
+clean-files += mconf qconf gconf
+clean-files += config.pot coreinfo.pot
+
+# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
+PHONY += $(objk)/dochecklxdialog
+$(addprefix $(obj)/,$(lxdialog)): $(objk)/dochecklxdialog
+$(objk)/dochecklxdialog:
+ $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES)
+
+always := dochecklxdialog
+
+# Add environment specific flags
+HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srck)/check.sh $(HOSTCC) $(HOSTCFLAGS))
+
+# generated files seem to need this to find local include files
+HOSTCFLAGS_lex.zconf.o := -I$(src)
+HOSTCFLAGS_zconf.tab.o := -I$(src)
+
+HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
+HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
+
+HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
+HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
+ -D LKC_DIRECT_LINK
+
+$(objk)/qconf.o: $(objk)/.tmp_qtcheck
+
+ifeq ($(qconf-target),1)
+$(objk)/.tmp_qtcheck: $(srck)/Makefile
+-include $(objk)/.tmp_qtcheck
+
+# QT needs some extra effort...
+$(objk)/.tmp_qtcheck: prepare
+ @set -e; dir=""; pkg=""; \
+ pkg-config --exists qt 2> /dev/null && pkg=qt; \
+ pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
+ if [ -n "$$pkg" ]; then \
+ cflags="\$$(shell pkg-config $$pkg --cflags)"; \
+ libs="\$$(shell pkg-config $$pkg --libs)"; \
+ moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
+ dir="$$(pkg-config $$pkg --variable=prefix)"; \
+ else \
+ for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
+ if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
+ done; \
+ if [ -z "$$dir" ]; then \
+ echo "*"; \
+ echo "* Unable to find the QT3 installation. Please make sure that"; \
+ echo "* the QT3 development package is correctly installed and"; \
+ echo "* either install pkg-config or set the QTDIR environment"; \
+ echo "* variable to the correct location."; \
+ echo "*"; \
+ false; \
+ fi; \
+ libpath=$$dir/lib; lib=qt; osdir=""; \
+ $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
+ osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
+ test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
+ test -f $$libpath/libqt-mt.so && lib=qt-mt; \
+ cflags="-I$$dir/include"; \
+ libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
+ moc="$$dir/bin/moc"; \
+ fi; \
+ if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
+ echo "*"; \
+ echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
+ echo "*"; \
+ moc="/usr/bin/moc"; \
+ fi; \
+ echo "KC_QT_CFLAGS=$$cflags" > $@; \
+ echo "KC_QT_LIBS=$$libs" >> $@; \
+ echo "KC_QT_MOC=$$moc" >> $@
+endif
+
+$(objk)/gconf.o: $(objk)/.tmp_gtkcheck
+
+ifeq ($(gconf-target),1)
+-include $(objk)/.tmp_gtkcheck
+
+# GTK needs some extra effort, too...
+$(objk)/.tmp_gtkcheck: prepare
+ @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
+ if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
+ touch $@; \
+ else \
+ echo "*"; \
+ echo "* GTK+ is present but version >= 2.0.0 is required."; \
+ echo "*"; \
+ false; \
+ fi \
+ else \
+ echo "*"; \
+ echo "* Unable to find the GTK+ installation. Please make sure that"; \
+ echo "* the GTK+ 2.0 development package is correctly installed..."; \
+ echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
+ echo "*"; \
+ false; \
+ fi
+endif
+
+# --- UNUSED, ignore ----------------------------------------------------------
+ifdef UNUSED
+$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
+
+$(obj)/kconfig_load.o: $(obj)/lkc_defs.h
+
+$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
+
+$(obj)/gconf.o: $(obj)/lkc_defs.h
+
+$(obj)/%.moc: $(src)/%.h
+ $(KC_QT_MOC) -i $< -o $@
+
+$(obj)/lkc_defs.h: $(src)/lkc_proto.h
+ sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
+
+# Extract gconf menu items for I18N support
+$(obj)/gconf.glade.h: $(obj)/gconf.glade
+ intltool-extract --type=gettext/glade $(obj)/gconf.glade
+endif
+# --- UNUSED, ignore ----------------------------------------------------------
+
+###
+# The following requires flex/bison/gperf
+# By default we use the _shipped versions, uncomment the following line if
+# you are modifying the flex/bison src.
+# LKC_GENPARSER := 1
+
+ifdef LKC_GENPARSER
+
+# --- UNUSED, ignore ----------------------------------------------------------
+$(obj)/zconf.tab.c: $(src)/zconf.y
+$(obj)/lex.zconf.c: $(src)/zconf.l
+$(obj)/zconf.hash.c: $(src)/zconf.gperf
+
+%.tab.c: %.y
+ bison -l -b $* -p $(notdir $*) $<
+ cp $@ $@_shipped
+
+lex.%.c: %.l
+ flex -L -P$(notdir $*) -o$@ $<
+ cp $@ $@_shipped
+
+%.hash.c: %.gperf
+ gperf < $< > $@
+ cp $@ $@_shipped
+# --- UNUSED, ignore ----------------------------------------------------------
+
+endif
+
+$(objk)/qconf: $(patsubst %,$(objk)/%,$(qconf-cxxobjs)) \
+ $(patsubst %,$(objk)/%,$(qconf-objs))
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) $(HOSTLOADLIBES_qconf) -o $@ $^
+$(objk)/gconf: $(patsubst %,$(objk)/%,$(gconf-objs))
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) $(HOSTLOADLIBES_gconf) -o $@ $^
+$(objk)/mconf: $(patsubst %,$(objk)/%,$(mconf-objs))
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES) -o $@ $^
+$(objk)/conf: $(patsubst %,$(objk)/%,$(conf-objs))
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) -o $@ $^
+
+$(objk)/mconf.o: $(srck)/mconf.c
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) -c -o $@ $<
+$(objk)/conf.o: $(srck)/conf.c
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) -c -o $@ $<
+
+$(objk)/zconf.tab.o: $(objk)/zconf.tab.c $(objk)/lex.zconf.c \
+ $(objk)/zconf.hash.c
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) -c -o $@ $(objk)/zconf.tab.c
+$(objk)/kconfig_load.o: $(srck)/kconfig_load.c $(objk)/lkc_defs.h
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) -c -o $@ $<
+$(objk)/qconf.o: $(srck)/qconf.cc $(objk)/qconf.moc $(objk)/lkc_defs.h
+ $(Q)$(HOSTCXX) $(HOSTCXXFLAGS) $(HOSTCXXFLAGS_qconf.o) -c -o $@ $<
+$(objk)/gconf.o: $(srck)/gconf.c $(objk)/lkc_defs.h
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) $(HOSTCFLAGS_gconf.o) -c -o $@ $<
+$(objk)/%.moc: $(srck)/%.h
+ $(Q)$(KC_QT_MOC) -i $< -o $@
+$(objk)/lkc_defs.h: $(srck)/lkc_proto.h
+ $(Q)sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
+
+$(objk)/lex.zconf.c: $(srck)/lex.zconf.c_shipped
+ $(Q)cp $< $@
+$(objk)/zconf.hash.c: $(srck)/zconf.hash.c_shipped
+ $(Q)cp $< $@
+$(objk)/zconf.tab.c: $(srck)/zconf.tab.c_shipped
+ $(Q)cp $< $@
+
+$(objk)/lxdialog/lxdialog: $(objk)/dochecklxdialog \
+ $(patsubst %,$(objk)/lxdialog/%,$(lxdialog))
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES) \
+ $(patsubst %,$(objk)/lxdialog/%,$(lxdialog)) -o $@
+$(objk)/lxdialog/%.o: $(srck)/lxdialog/%.c
+ $(Q)$(HOSTCC) $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) $^ -c -o $@
+
diff --git a/util/kconfig/POTFILES.in b/util/kconfig/POTFILES.in
new file mode 100644
index 0000000..b6c78a9b
--- /dev/null
+++ b/util/kconfig/POTFILES.in
@@ -0,0 +1,12 @@
+util/kconfig/lxdialog/checklist.c
+util/kconfig/lxdialog/inputbox.c
+util/kconfig/lxdialog/menubox.c
+util/kconfig/lxdialog/textbox.c
+util/kconfig/lxdialog/util.c
+util/kconfig/lxdialog/yesno.c
+util/kconfig/mconf.c
+util/kconfig/conf.c
+util/kconfig/confdata.c
+util/kconfig/gconf.c
+util/kconfig/gconf.glade.h
+util/kconfig/qconf.cc
diff --git a/util/kconfig/check.sh b/util/kconfig/check.sh
new file mode 100644
index 0000000..fa59cbf
--- /dev/null
+++ b/util/kconfig/check.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+# Needed for systems without gettext
+$* -xc -o /dev/null - > /dev/null 2>&1 << EOF
+#include <libintl.h>
+int main()
+{
+ gettext("");
+ return 0;
+}
+EOF
+if [ ! "$?" -eq "0" ]; then
+ echo -DKBUILD_NO_NLS;
+fi
+
diff --git a/util/kconfig/conf.c b/util/kconfig/conf.c
new file mode 100644
index 0000000..4393c2a
--- /dev/null
+++ b/util/kconfig/conf.c
@@ -0,0 +1,638 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <locale.h>
+#include <ctype.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+#include <sys/stat.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+static void conf(struct menu *menu);
+static void check_conf(struct menu *menu);
+
+enum {
+ ask_all,
+ ask_new,
+ ask_silent,
+ set_default,
+ set_yes,
+ set_mod,
+ set_no,
+ set_random
+} input_mode = ask_all;
+char *defconfig_file;
+
+static int indent = 1;
+static int valid_stdin = 1;
+static int conf_cnt;
+static char line[128];
+static struct menu *rootEntry;
+
+static char nohelp_text[] = N_("Sorry, no help available for this option yet.\n");
+
+static const char *get_help(struct menu *menu)
+{
+ if (menu_has_help(menu))
+ return _(menu_get_help(menu));
+ else
+ return nohelp_text;
+}
+
+static void strip(char *str)
+{
+ char *p = str;
+ int l;
+
+ while ((isspace(*p)))
+ p++;
+ l = strlen(p);
+ if (p != str)
+ memmove(str, p, l + 1);
+ if (!l)
+ return;
+ p = str + l - 1;
+ while ((isspace(*p)))
+ *p-- = 0;
+}
+
+static void check_stdin(void)
+{
+ if (!valid_stdin && input_mode == ask_silent) {
+ printf(_("aborted!\n\n"));
+ printf(_("Console input/output is redirected. "));
+ printf(_("Run 'make oldconfig' to update configuration.\n\n"));
+ exit(1);
+ }
+}
+
+static int conf_askvalue(struct symbol *sym, const char *def)
+{
+ enum symbol_type type = sym_get_type(sym);
+ tristate val;
+
+ if (!sym_has_value(sym))
+ printf(_("(NEW) "));
+
+ line[0] = '\n';
+ line[1] = 0;
+
+ if (!sym_is_changable(sym)) {
+ printf("%s\n", def);
+ line[0] = '\n';
+ line[1] = 0;
+ return 0;
+ }
+
+ switch (input_mode) {
+ case set_no:
+ case set_mod:
+ case set_yes:
+ case set_random:
+ if (sym_has_value(sym)) {
+ printf("%s\n", def);
+ return 0;
+ }
+ break;
+ case ask_new:
+ case ask_silent:
+ if (sym_has_value(sym)) {
+ printf("%s\n", def);
+ return 0;
+ }
+ check_stdin();
+ case ask_all:
+ fflush(stdout);
+ fgets(line, 128, stdin);
+ return 1;
+ case set_default:
+ printf("%s\n", def);
+ return 1;
+ default:
+ break;
+ }
+
+ switch (type) {
+ case S_INT:
+ case S_HEX:
+ case S_STRING:
+ printf("%s\n", def);
+ return 1;
+ default:
+ ;
+ }
+ switch (input_mode) {
+ case set_yes:
+ if (sym_tristate_within_range(sym, yes)) {
+ line[0] = 'y';
+ line[1] = '\n';
+ line[2] = 0;
+ break;
+ }
+ case set_mod:
+ if (type == S_TRISTATE) {
+ if (sym_tristate_within_range(sym, mod)) {
+ line[0] = 'm';
+ line[1] = '\n';
+ line[2] = 0;
+ break;
+ }
+ } else {
+ if (sym_tristate_within_range(sym, yes)) {
+ line[0] = 'y';
+ line[1] = '\n';
+ line[2] = 0;
+ break;
+ }
+ }
+ case set_no:
+ if (sym_tristate_within_range(sym, no)) {
+ line[0] = 'n';
+ line[1] = '\n';
+ line[2] = 0;
+ break;
+ }
+ case set_random:
+ do {
+ val = (tristate)(rand() % 3);
+ } while (!sym_tristate_within_range(sym, val));
+ switch (val) {
+ case no: line[0] = 'n'; break;
+ case mod: line[0] = 'm'; break;
+ case yes: line[0] = 'y'; break;
+ }
+ line[1] = '\n';
+ line[2] = 0;
+ break;
+ default:
+ break;
+ }
+ printf("%s", line);
+ return 1;
+}
+
+int conf_string(struct menu *menu)
+{
+ struct symbol *sym = menu->sym;
+ const char *def;
+
+ while (1) {
+ printf("%*s%s ", indent - 1, "", _(menu->prompt->text));
+ printf("(%s) ", sym->name);
+ def = sym_get_string_value(sym);
+ if (sym_get_string_value(sym))
+ printf("[%s] ", def);
+ if (!conf_askvalue(sym, def))
+ return 0;
+ switch (line[0]) {
+ case '\n':
+ break;
+ case '?':
+ /* print help */
+ if (line[1] == '\n') {
+ printf("\n%s\n", get_help(menu));
+ def = NULL;
+ break;
+ }
+ default:
+ line[strlen(line)-1] = 0;
+ def = line;
+ }
+ if (def && sym_set_string_value(sym, def))
+ return 0;
+ }
+}
+
+static int conf_sym(struct menu *menu)
+{
+ struct symbol *sym = menu->sym;
+ int type;
+ tristate oldval, newval;
+
+ while (1) {
+ printf("%*s%s ", indent - 1, "", _(menu->prompt->text));
+ if (sym->name)
+ printf("(%s) ", sym->name);
+ type = sym_get_type(sym);
+ putchar('[');
+ oldval = sym_get_tristate_value(sym);
+ switch (oldval) {
+ case no:
+ putchar('N');
+ break;
+ case mod:
+ putchar('M');
+ break;
+ case yes:
+ putchar('Y');
+ break;
+ }
+ if (oldval != no && sym_tristate_within_range(sym, no))
+ printf("/n");
+ if (oldval != mod && sym_tristate_within_range(sym, mod))
+ printf("/m");
+ if (oldval != yes && sym_tristate_within_range(sym, yes))
+ printf("/y");
+ if (menu_has_help(menu))
+ printf("/?");
+ printf("] ");
+ if (!conf_askvalue(sym, sym_get_string_value(sym)))
+ return 0;
+ strip(line);
+
+ switch (line[0]) {
+ case 'n':
+ case 'N':
+ newval = no;
+ if (!line[1] || !strcmp(&line[1], "o"))
+ break;
+ continue;
+ case 'm':
+ case 'M':
+ newval = mod;
+ if (!line[1])
+ break;
+ continue;
+ case 'y':
+ case 'Y':
+ newval = yes;
+ if (!line[1] || !strcmp(&line[1], "es"))
+ break;
+ continue;
+ case 0:
+ newval = oldval;
+ break;
+ case '?':
+ goto help;
+ default:
+ continue;
+ }
+ if (sym_set_tristate_value(sym, newval))
+ return 0;
+help:
+ printf("\n%s\n", get_help(menu));
+ }
+}
+
+static int conf_choice(struct menu *menu)
+{
+ struct symbol *sym, *def_sym;
+ struct menu *child;
+ int type;
+ bool is_new;
+
+ sym = menu->sym;
+ type = sym_get_type(sym);
+ is_new = !sym_has_value(sym);
+ if (sym_is_changable(sym)) {
+ conf_sym(menu);
+ sym_calc_value(sym);
+ switch (sym_get_tristate_value(sym)) {
+ case no:
+ return 1;
+ case mod:
+ return 0;
+ case yes:
+ break;
+ }
+ } else {
+ switch (sym_get_tristate_value(sym)) {
+ case no:
+ return 1;
+ case mod:
+ printf("%*s%s\n", indent - 1, "", _(menu_get_prompt(menu)));
+ return 0;
+ case yes:
+ break;
+ }
+ }
+
+ while (1) {
+ int cnt, def;
+
+ printf("%*s%s\n", indent - 1, "", _(menu_get_prompt(menu)));
+ def_sym = sym_get_choice_value(sym);
+ cnt = def = 0;
+ line[0] = 0;
+ for (child = menu->list; child; child = child->next) {
+ if (!menu_is_visible(child))
+ continue;
+ if (!child->sym) {
+ printf("%*c %s\n", indent, '*', _(menu_get_prompt(child)));
+ continue;
+ }
+ cnt++;
+ if (child->sym == def_sym) {
+ def = cnt;
+ printf("%*c", indent, '>');
+ } else
+ printf("%*c", indent, ' ');
+ printf(" %d. %s", cnt, _(menu_get_prompt(child)));
+ if (child->sym->name)
+ printf(" (%s)", child->sym->name);
+ if (!sym_has_value(child->sym))
+ printf(_(" (NEW)"));
+ printf("\n");
+ }
+ printf(_("%*schoice"), indent - 1, "");
+ if (cnt == 1) {
+ printf("[1]: 1\n");
+ goto conf_childs;
+ }
+ printf("[1-%d", cnt);
+ if (menu_has_help(menu))
+ printf("?");
+ printf("]: ");
+ switch (input_mode) {
+ case ask_new:
+ case ask_silent:
+ if (!is_new) {
+ cnt = def;
+ printf("%d\n", cnt);
+ break;
+ }
+ check_stdin();
+ case ask_all:
+ fflush(stdout);
+ fgets(line, 128, stdin);
+ strip(line);
+ if (line[0] == '?') {
+ printf("\n%s\n", get_help(menu));
+ continue;
+ }
+ if (!line[0])
+ cnt = def;
+ else if (isdigit(line[0]))
+ cnt = atoi(line);
+ else
+ continue;
+ break;
+ case set_random:
+ if (is_new)
+ def = (rand() % cnt) + 1;
+ case set_default:
+ case set_yes:
+ case set_mod:
+ case set_no:
+ cnt = def;
+ printf("%d\n", cnt);
+ break;
+ }
+
+ conf_childs:
+ for (child = menu->list; child; child = child->next) {
+ if (!child->sym || !menu_is_visible(child))
+ continue;
+ if (!--cnt)
+ break;
+ }
+ if (!child)
+ continue;
+ if (line[strlen(line) - 1] == '?') {
+ printf("\n%s\n", get_help(child));
+ continue;
+ }
+ sym_set_choice_value(sym, child->sym);
+ for (child = child->list; child; child = child->next) {
+ indent += 2;
+ conf(child);
+ indent -= 2;
+ }
+ return 1;
+ }
+}
+
+static void conf(struct menu *menu)
+{
+ struct symbol *sym;
+ struct property *prop;
+ struct menu *child;
+
+ if (!menu_is_visible(menu))
+ return;
+
+ sym = menu->sym;
+ prop = menu->prompt;
+ if (prop) {
+ const char *prompt;
+
+ switch (prop->type) {
+ case P_MENU:
+ if (input_mode == ask_silent && rootEntry != menu) {
+ check_conf(menu);
+ return;
+ }
+ case P_COMMENT:
+ prompt = menu_get_prompt(menu);
+ if (prompt)
+ printf("%*c\n%*c %s\n%*c\n",
+ indent, '*',
+ indent, '*', _(prompt),
+ indent, '*');
+ default:
+ ;
+ }
+ }
+
+ if (!sym)
+ goto conf_childs;
+
+ if (sym_is_choice(sym)) {
+ conf_choice(menu);
+ if (sym->curr.tri != mod)
+ return;
+ goto conf_childs;
+ }
+
+ switch (sym->type) {
+ case S_INT:
+ case S_HEX:
+ case S_STRING:
+ conf_string(menu);
+ break;
+ default:
+ conf_sym(menu);
+ break;
+ }
+
+conf_childs:
+ if (sym)
+ indent += 2;
+ for (child = menu->list; child; child = child->next)
+ conf(child);
+ if (sym)
+ indent -= 2;
+}
+
+static void check_conf(struct menu *menu)
+{
+ struct symbol *sym;
+ struct menu *child;
+
+ if (!menu_is_visible(menu))
+ return;
+
+ sym = menu->sym;
+ if (sym && !sym_has_value(sym)) {
+ if (sym_is_changable(sym) ||
+ (sym_is_choice(sym) && sym_get_tristate_value(sym) == yes)) {
+ if (!conf_cnt++)
+ printf(_("*\n* Restart config...\n*\n"));
+ rootEntry = menu_get_parent_menu(menu);
+ conf(rootEntry);
+ }
+ }
+
+ for (child = menu->list; child; child = child->next)
+ check_conf(child);
+}
+
+int main(int ac, char **av)
+{
+ int opt;
+ const char *name;
+ struct stat tmpstat;
+
+ setlocale(LC_ALL, "");
+ bindtextdomain(PACKAGE, LOCALEDIR);
+ textdomain(PACKAGE);
+
+ while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) {
+ switch (opt) {
+ case 'o':
+ input_mode = ask_new;
+ break;
+ case 's':
+ input_mode = ask_silent;
+ valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ break;
+ case 'd':
+ input_mode = set_default;
+ break;
+ case 'D':
+ input_mode = set_default;
+ defconfig_file = optarg;
+ break;
+ case 'n':
+ input_mode = set_no;
+ break;
+ case 'm':
+ input_mode = set_mod;
+ break;
+ case 'y':
+ input_mode = set_yes;
+ break;
+ case 'r':
+ input_mode = set_random;
+ srand(time(NULL));
+ break;
+ case 'h':
+ printf(_("See README for usage info\n"));
+ exit(0);
+ break;
+ default:
+ fprintf(stderr, _("See README for usage info\n"));
+ exit(1);
+ }
+ }
+ if (ac == optind) {
+ printf(_("%s: Kconfig file missing\n"), av[0]);
+ exit(1);
+ }
+ name = av[optind];
+ conf_parse(name);
+ //zconfdump(stdout);
+ switch (input_mode) {
+ case set_default:
+ if (!defconfig_file)
+ defconfig_file = conf_get_default_confname();
+ if (conf_read(defconfig_file)) {
+ printf(_("***\n"
+ "*** Can't find default configuration \"%s\"!\n"
+ "***\n"), defconfig_file);
+ exit(1);
+ }
+ break;
+ case ask_silent:
+ if (stat(".config", &tmpstat)) {
+ printf(_("***\n"
+ "*** You have not yet configured coreboot!\n"
+ "*** (missing .config file)\n"
+ "***\n"
+ "*** Please run some configurator (e.g. \"make oldconfig\" or\n"
+ "*** \"make menuconfig\" or \"make xconfig\").\n"
+ "***\n"));
+ exit(1);
+ }
+ case ask_all:
+ case ask_new:
+ conf_read(NULL);
+ break;
+ case set_no:
+ case set_mod:
+ case set_yes:
+ case set_random:
+ name = getenv("KCONFIG_ALLCONFIG");
+ if (name && !stat(name, &tmpstat)) {
+ conf_read_simple(name, S_DEF_USER);
+ break;
+ }
+ switch (input_mode) {
+ case set_no: name = "allno.config"; break;
+ case set_mod: name = "allmod.config"; break;
+ case set_yes: name = "allyes.config"; break;
+ case set_random: name = "allrandom.config"; break;
+ default: break;
+ }
+ if (!stat(name, &tmpstat))
+ conf_read_simple(name, S_DEF_USER);
+ else if (!stat("all.config", &tmpstat))
+ conf_read_simple("all.config", S_DEF_USER);
+ break;
+ default:
+ break;
+ }
+
+ if (input_mode != ask_silent) {
+ rootEntry = &rootmenu;
+ conf(&rootmenu);
+ if (input_mode == ask_all) {
+ input_mode = ask_silent;
+ valid_stdin = 1;
+ }
+ } else if (conf_get_changed()) {
+ name = getenv("KCONFIG_NOSILENTUPDATE");
+ if (name && *name) {
+ fprintf(stderr, _("\n*** coreboot configuration requires explicit update.\n\n"));
+ return 1;
+ }
+ } else
+ goto skip_check;
+
+ do {
+ conf_cnt = 0;
+ check_conf(&rootmenu);
+ } while (conf_cnt);
+ if (conf_write(NULL)) {
+ fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n"));
+ return 1;
+ }
+ if (conf_write_autoconf()) {
+ fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n"));
+ return 1;
+ }
+skip_check:
+ if (input_mode == ask_silent && conf_write_autoconf()) {
+ fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n"));
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/util/kconfig/confdata.c b/util/kconfig/confdata.c
new file mode 100644
index 0000000..05c2601
--- /dev/null
+++ b/util/kconfig/confdata.c
@@ -0,0 +1,818 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <sys/stat.h>
+#include <ctype.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+static void conf_warning(const char *fmt, ...)
+ __attribute__ ((format (printf, 1, 2)));
+
+static const char *conf_filename;
+static int conf_lineno, conf_warnings, conf_unsaved;
+
+const char conf_defname[] = "arch/$ARCH/defconfig";
+
+static void conf_warning(const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+ fprintf(stderr, "%s:%d:warning: ", conf_filename, conf_lineno);
+ vfprintf(stderr, fmt, ap);
+ fprintf(stderr, "\n");
+ va_end(ap);
+ conf_warnings++;
+}
+
+const char *conf_get_configname(void)
+{
+ char *name = getenv("KCONFIG_CONFIG");
+
+ return name ? name : ".config";
+}
+
+static char *conf_expand_value(const char *in)
+{
+ struct symbol *sym;
+ const char *src;
+ static char res_value[SYMBOL_MAXLENGTH];
+ char *dst, name[SYMBOL_MAXLENGTH];
+
+ res_value[0] = 0;
+ dst = name;
+ while ((src = strchr(in, '$'))) {
+ strncat(res_value, in, src - in);
+ src++;
+ dst = name;
+ while (isalnum(*src) || *src == '_')
+ *dst++ = *src++;
+ *dst = 0;
+ sym = sym_lookup(name, 0);
+ sym_calc_value(sym);
+ strcat(res_value, sym_get_string_value(sym));
+ in = src;
+ }
+ strcat(res_value, in);
+
+ return res_value;
+}
+
+char *conf_get_default_confname(void)
+{
+ struct stat buf;
+ static char fullname[PATH_MAX+1];
+ char *env, *name;
+
+ name = conf_expand_value(conf_defname);
+ env = getenv(SRCTREE);
+ if (env) {
+ sprintf(fullname, "%s/%s", env, name);
+ if (!stat(fullname, &buf))
+ return fullname;
+ }
+ return name;
+}
+
+static int conf_set_sym_val(struct symbol *sym, int def, int def_flags, char *p)
+{
+ char *p2;
+
+ switch (sym->type) {
+ case S_TRISTATE:
+ if (p[0] == 'm') {
+ sym->def[def].tri = mod;
+ sym->flags |= def_flags;
+ break;
+ }
+ case S_BOOLEAN:
+ if (p[0] == 'y') {
+ sym->def[def].tri = yes;
+ sym->flags |= def_flags;
+ break;
+ }
+ if (p[0] == 'n') {
+ sym->def[def].tri = no;
+ sym->flags |= def_flags;
+ break;
+ }
+ conf_warning("symbol value '%s' invalid for %s", p, sym->name);
+ break;
+ case S_OTHER:
+ if (*p != '"') {
+ for (p2 = p; *p2 && !isspace(*p2); p2++)
+ ;
+ sym->type = S_STRING;
+ goto done;
+ }
+ case S_STRING:
+ if (*p++ != '"')
+ break;
+ for (p2 = p; (p2 = strpbrk(p2, "\"\\")); p2++) {
+ if (*p2 == '"') {
+ *p2 = 0;
+ break;
+ }
+ memmove(p2, p2 + 1, strlen(p2));
+ }
+ if (!p2) {
+ conf_warning("invalid string found");
+ return 1;
+ }
+ case S_INT:
+ case S_HEX:
+ done:
+ if (sym_string_valid(sym, p)) {
+ sym->def[def].val = strdup(p);
+ sym->flags |= def_flags;
+ } else {
+ conf_warning("symbol value '%s' invalid for %s", p, sym->name);
+ return 1;
+ }
+ break;
+ default:
+ ;
+ }
+ return 0;
+}
+
+int conf_read_simple(const char *name, int def)
+{
+ FILE *in = NULL;
+ char line[1024];
+ char *p, *p2;
+ struct symbol *sym;
+ int i, def_flags;
+
+ if (name) {
+ in = zconf_fopen(name);
+ } else {
+ struct property *prop;
+
+ name = conf_get_configname();
+ in = zconf_fopen(name);
+ if (in)
+ goto load;
+ sym_add_change_count(1);
+ if (!sym_defconfig_list)
+ return 1;
+
+ for_all_defaults(sym_defconfig_list, prop) {
+ if (expr_calc_value(prop->visible.expr) == no ||
+ prop->expr->type != E_SYMBOL)
+ continue;
+ name = conf_expand_value(prop->expr->left.sym->name);
+ in = zconf_fopen(name);
+ if (in) {
+ printf(_("#\n"
+ "# using defaults found in %s\n"
+ "#\n"), name);
+ goto load;
+ }
+ }
+ }
+ if (!in)
+ return 1;
+
+load:
+ conf_filename = name;
+ conf_lineno = 0;
+ conf_warnings = 0;
+ conf_unsaved = 0;
+
+ def_flags = SYMBOL_DEF << def;
+ for_all_symbols(i, sym) {
+ sym->flags |= SYMBOL_CHANGED;
+ sym->flags &= ~(def_flags|SYMBOL_VALID);
+ if (sym_is_choice(sym))
+ sym->flags |= def_flags;
+ switch (sym->type) {
+ case S_INT:
+ case S_HEX:
+ case S_STRING:
+ if (sym->def[def].val)
+ free(sym->def[def].val);
+ default:
+ sym->def[def].val = NULL;
+ sym->def[def].tri = no;
+ }
+ }
+
+ while (fgets(line, sizeof(line), in)) {
+ conf_lineno++;
+ sym = NULL;
+ switch (line[0]) {
+ case '#':
+ if (memcmp(line + 2, "CONFIG_", 7))
+ continue;
+ p = strchr(line + 9, ' ');
+ if (!p)
+ continue;
+ *p++ = 0;
+ if (strncmp(p, "is not set", 10))
+ continue;
+ if (def == S_DEF_USER) {
+ sym = sym_find(line + 9);
+ if (!sym) {
+ conf_warning("trying to assign nonexistent symbol %s", line + 9);
+ break;
+ }
+ } else {
+ sym = sym_lookup(line + 9, 0);
+ if (sym->type == S_UNKNOWN)
+ sym->type = S_BOOLEAN;
+ }
+ if (sym->flags & def_flags) {
+ conf_warning("override: reassigning to symbol %s", sym->name);
+ }
+ switch (sym->type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ sym->def[def].tri = no;
+ sym->flags |= def_flags;
+ break;
+ default:
+ ;
+ }
+ break;
+ case 'C':
+ if (memcmp(line, "CONFIG_", 7)) {
+ conf_warning("unexpected data");
+ continue;
+ }
+ p = strchr(line + 7, '=');
+ if (!p)
+ continue;
+ *p++ = 0;
+ p2 = strchr(p, '\n');
+ if (p2) {
+ *p2-- = 0;
+ if (*p2 == '\r')
+ *p2 = 0;
+ }
+ if (def == S_DEF_USER) {
+ sym = sym_find(line + 7);
+ if (!sym) {
+ conf_warning("trying to assign nonexistent symbol %s", line + 7);
+ break;
+ }
+ } else {
+ sym = sym_lookup(line + 7, 0);
+ if (sym->type == S_UNKNOWN)
+ sym->type = S_OTHER;
+ }
+ if (sym->flags & def_flags) {
+ conf_warning("override: reassigning to symbol %s", sym->name);
+ }
+ if (conf_set_sym_val(sym, def, def_flags, p))
+ continue;
+ break;
+ case '\r':
+ case '\n':
+ break;
+ default:
+ conf_warning("unexpected data");
+ continue;
+ }
+ if (sym && sym_is_choice_value(sym)) {
+ struct symbol *cs = prop_get_symbol(sym_get_choice_prop(sym));
+ switch (sym->def[def].tri) {
+ case no:
+ break;
+ case mod:
+ if (cs->def[def].tri == yes) {
+ conf_warning("%s creates inconsistent choice state", sym->name);
+ cs->flags &= ~def_flags;
+ }
+ break;
+ case yes:
+ if (cs->def[def].tri != no)
+ conf_warning("override: %s changes choice state", sym->name);
+ cs->def[def].val = sym;
+ break;
+ }
+ cs->def[def].tri = EXPR_OR(cs->def[def].tri, sym->def[def].tri);
+ }
+ }
+ fclose(in);
+
+ if (modules_sym)
+ sym_calc_value(modules_sym);
+ return 0;
+}
+
+int conf_read(const char *name)
+{
+ struct symbol *sym, *choice_sym;
+ struct property *prop;
+ struct expr *e;
+ int i, flags;
+
+ sym_set_change_count(0);
+
+ if (conf_read_simple(name, S_DEF_USER))
+ return 1;
+
+ for_all_symbols(i, sym) {
+ sym_calc_value(sym);
+ if (sym_is_choice(sym) || (sym->flags & SYMBOL_AUTO))
+ goto sym_ok;
+ if (sym_has_value(sym) && (sym->flags & SYMBOL_WRITE)) {
+ /* check that calculated value agrees with saved value */
+ switch (sym->type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ if (sym->def[S_DEF_USER].tri != sym_get_tristate_value(sym))
+ break;
+ if (!sym_is_choice(sym))
+ goto sym_ok;
+ default:
+ if (!strcmp(sym->curr.val, sym->def[S_DEF_USER].val))
+ goto sym_ok;
+ break;
+ }
+ } else if (!sym_has_value(sym) && !(sym->flags & SYMBOL_WRITE))
+ /* no previous value and not saved */
+ goto sym_ok;
+ conf_unsaved++;
+ /* maybe print value in verbose mode... */
+ sym_ok:
+ if (!sym_is_choice(sym))
+ continue;
+ /* The choice symbol only has a set value (and thus is not new)
+ * if all its visible childs have values.
+ */
+ prop = sym_get_choice_prop(sym);
+ flags = sym->flags;
+ expr_list_for_each_sym(prop->expr, e, choice_sym)
+ if (choice_sym->visible != no)
+ flags &= choice_sym->flags;
+ sym->flags &= flags | ~SYMBOL_DEF_USER;
+ }
+
+ for_all_symbols(i, sym) {
+ if (sym_has_value(sym) && !sym_is_choice_value(sym)) {
+ /* Reset values of generates values, so they'll appear
+ * as new, if they should become visible, but that
+ * doesn't quite work if the Kconfig and the saved
+ * configuration disagree.
+ */
+ if (sym->visible == no && !conf_unsaved)
+ sym->flags &= ~SYMBOL_DEF_USER;
+ switch (sym->type) {
+ case S_STRING:
+ case S_INT:
+ case S_HEX:
+ /* Reset a string value if it's out of range */
+ if (sym_string_within_range(sym, sym->def[S_DEF_USER].val))
+ break;
+ sym->flags &= ~(SYMBOL_VALID|SYMBOL_DEF_USER);
+ conf_unsaved++;
+ break;
+ default:
+ break;
+ }
+ }
+ }
+
+ sym_add_change_count(conf_warnings || conf_unsaved);
+
+ return 0;
+}
+
+int conf_write(const char *name)
+{
+ FILE *out;
+ struct symbol *sym;
+ struct menu *menu;
+ const char *basename;
+ char dirname[128], tmpname[128], newname[128];
+ int type, l;
+ const char *str;
+ time_t now;
+ int use_timestamp = 1;
+ char *env;
+
+ dirname[0] = 0;
+ if (name && name[0]) {
+ struct stat st;
+ char *slash;
+
+ if (!stat(name, &st) && S_ISDIR(st.st_mode)) {
+ strcpy(dirname, name);
+ strcat(dirname, "/");
+ basename = conf_get_configname();
+ } else if ((slash = strrchr(name, '/'))) {
+ int size = slash - name + 1;
+ memcpy(dirname, name, size);
+ dirname[size] = 0;
+ if (slash[1])
+ basename = slash + 1;
+ else
+ basename = conf_get_configname();
+ } else
+ basename = name;
+ } else
+ basename = conf_get_configname();
+
+ sprintf(newname, "%s%s", dirname, basename);
+ env = getenv("KCONFIG_OVERWRITECONFIG");
+ if (!env || !*env) {
+ sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
+ out = fopen(tmpname, "w");
+ } else {
+ *tmpname = 0;
+ out = fopen(newname, "w");
+ }
+ if (!out)
+ return 1;
+
+ sym = sym_lookup("KERNELVERSION", 0);
+ sym_calc_value(sym);
+ time(&now);
+ env = getenv("KCONFIG_NOTIMESTAMP");
+ if (env && *env)
+ use_timestamp = 0;
+
+ fprintf(out, _("#\n"
+ "# Automatically generated make config: don't edit\n"
+ "# coreboot version: %s\n"
+ "%s%s"
+ "#\n"),
+ getenv("KERNELVERSION")?getenv("KERNELVERSION"):"",
+ use_timestamp ? "# " : "",
+ use_timestamp ? ctime(&now) : "");
+
+ if (!conf_get_changed())
+ sym_clear_all_valid();
+
+ menu = rootmenu.list;
+ while (menu) {
+ sym = menu->sym;
+ if (!sym) {
+ if (!menu_is_visible(menu))
+ goto next;
+ str = menu_get_prompt(menu);
+ fprintf(out, "\n"
+ "#\n"
+ "# %s\n"
+ "#\n", str);
+ } else if (!(sym->flags & SYMBOL_CHOICE)) {
+ sym_calc_value(sym);
+ if (!(sym->flags & SYMBOL_WRITE))
+ goto next;
+ sym->flags &= ~SYMBOL_WRITE;
+ type = sym->type;
+ if (type == S_TRISTATE) {
+ sym_calc_value(modules_sym);
+ if (modules_sym->curr.tri == no)
+ type = S_BOOLEAN;
+ }
+ switch (type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ switch (sym_get_tristate_value(sym)) {
+ case no:
+ fprintf(out, "# CONFIG_%s is not set\n", sym->name);
+ break;
+ case mod:
+ fprintf(out, "CONFIG_%s=m\n", sym->name);
+ break;
+ case yes:
+ fprintf(out, "CONFIG_%s=y\n", sym->name);
+ break;
+ }
+ break;
+ case S_STRING:
+ str = sym_get_string_value(sym);
+ fprintf(out, "CONFIG_%s=\"", sym->name);
+ while (1) {
+ l = strcspn(str, "\"\\");
+ if (l) {
+ fwrite(str, l, 1, out);
+ str += l;
+ }
+ if (!*str)
+ break;
+ fprintf(out, "\\%c", *str++);
+ }
+ fputs("\"\n", out);
+ break;
+ case S_HEX:
+ str = sym_get_string_value(sym);
+ if (str[0] != '0' || (str[1] != 'x' && str[1] != 'X')) {
+ fprintf(out, "CONFIG_%s=%s\n", sym->name, str);
+ break;
+ }
+ case S_INT:
+ str = sym_get_string_value(sym);
+ fprintf(out, "CONFIG_%s=%s\n", sym->name, str);
+ break;
+ }
+ }
+
+ next:
+ if (menu->list) {
+ menu = menu->list;
+ continue;
+ }
+ if (menu->next)
+ menu = menu->next;
+ else while ((menu = menu->parent)) {
+ if (menu->next) {
+ menu = menu->next;
+ break;
+ }
+ }
+ }
+ fclose(out);
+
+ if (*tmpname) {
+ strcat(dirname, basename);
+ strcat(dirname, ".old");
+ rename(newname, dirname);
+ if (rename(tmpname, newname))
+ return 1;
+ }
+
+ printf(_("#\n"
+ "# configuration written to %s\n"
+ "#\n"), newname);
+
+ sym_set_change_count(0);
+
+ return 0;
+}
+
+int conf_split_config(void)
+{
+ char *name, path[128];
+ char *s, *d, c;
+ struct symbol *sym;
+ struct stat sb;
+ int res, i, fd;
+
+ name = getenv("KCONFIG_AUTOCONFIG");
+ if (!name)
+ name = "include/config/auto.conf";
+ conf_read_simple(name, S_DEF_AUTO);
+
+ if (chdir("build"))
+ return 1;
+
+ res = 0;
+ for_all_symbols(i, sym) {
+ sym_calc_value(sym);
+ if ((sym->flags & SYMBOL_AUTO) || !sym->name)
+ continue;
+ if (sym->flags & SYMBOL_WRITE) {
+ if (sym->flags & SYMBOL_DEF_AUTO) {
+ /*
+ * symbol has old and new value,
+ * so compare them...
+ */
+ switch (sym->type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ if (sym_get_tristate_value(sym) ==
+ sym->def[S_DEF_AUTO].tri)
+ continue;
+ break;
+ case S_STRING:
+ case S_HEX:
+ case S_INT:
+ if (!strcmp(sym_get_string_value(sym),
+ sym->def[S_DEF_AUTO].val))
+ continue;
+ break;
+ default:
+ break;
+ }
+ } else {
+ /*
+ * If there is no old value, only 'no' (unset)
+ * is allowed as new value.
+ */
+ switch (sym->type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ if (sym_get_tristate_value(sym) == no)
+ continue;
+ break;
+ default:
+ break;
+ }
+ }
+ } else if (!(sym->flags & SYMBOL_DEF_AUTO))
+ /* There is neither an old nor a new value. */
+ continue;
+ /* else
+ * There is an old value, but no new value ('no' (unset)
+ * isn't saved in auto.conf, so the old value is always
+ * different from 'no').
+ */
+
+ /* Replace all '_' and append ".h" */
+ s = sym->name;
+ d = path;
+ while ((c = *s++)) {
+ c = tolower(c);
+ *d++ = (c == '_') ? '/' : c;
+ }
+ strcpy(d, ".h");
+
+ /* Assume directory path already exists. */
+ fd = open(path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if (fd == -1) {
+ if (errno != ENOENT) {
+ res = 1;
+ break;
+ }
+ /*
+ * Create directory components,
+ * unless they exist already.
+ */
+ d = path;
+ while ((d = strchr(d, '/'))) {
+ *d = 0;
+ if (stat(path, &sb) && mkdir(path, 0755)) {
+ res = 1;
+ goto out;
+ }
+ *d++ = '/';
+ }
+ /* Try it again. */
+ fd = open(path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if (fd == -1) {
+ res = 1;
+ break;
+ }
+ }
+ close(fd);
+ }
+out:
+ if (chdir("../.."))
+ return 1;
+
+ return res;
+}
+
+int conf_write_autoconf(void)
+{
+ struct symbol *sym;
+ const char *str;
+ char *name;
+ FILE *out, *out_h;
+ time_t now;
+ int i, l;
+
+ sym_clear_all_valid();
+
+ file_write_dep("build/auto.conf.cmd");
+
+#if 0
+ if (conf_split_config())
+ return 1;
+#endif
+
+ out = fopen(".tmpconfig", "w");
+ if (!out)
+ return 1;
+
+ out_h = fopen(".tmpconfig.h", "w");
+ if (!out_h) {
+ fclose(out);
+ return 1;
+ }
+
+ sym = sym_lookup("KERNELVERSION", 0);
+ sym_calc_value(sym);
+ time(&now);
+ fprintf(out, "#\n"
+ "# Automatically generated make config: don't edit\n"
+ "# coreboot version: %s\n"
+ "# %s"
+ "#\n",
+ getenv("KERNELVERSION")?getenv("KERNELVERSION"):"", ctime(&now));
+ fprintf(out_h, "/*\n"
+ " * Automatically generated C config: don't edit\n"
+ " * coreboot version: %s\n"
+ " * %s"
+ " */\n"
+ "#define AUTOCONF_INCLUDED\n",
+ getenv("KERNELVERSION")?getenv("KERNELVERSION"):"", ctime(&now));
+
+ for_all_symbols(i, sym) {
+ sym_calc_value(sym);
+ if (!(sym->flags & SYMBOL_WRITE) || !sym->name)
+ continue;
+ switch (sym->type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ switch (sym_get_tristate_value(sym)) {
+ case no:
+ fprintf(out, "CONFIG_%s=n\n", sym->name);
+ fprintf(out_h, "#define CONFIG_%s 0\n", sym->name);
+ break;
+ case mod:
+ fprintf(out, "CONFIG_%s=m\n", sym->name);
+ fprintf(out_h, "#define CONFIG_%s_MODULE 1\n", sym->name);
+ break;
+ case yes:
+ fprintf(out, "CONFIG_%s=y\n", sym->name);
+ fprintf(out_h, "#define CONFIG_%s 1\n", sym->name);
+ break;
+ }
+ break;
+ case S_STRING:
+ str = sym_get_string_value(sym);
+ fprintf(out, "CONFIG_%s=\"", sym->name);
+ fprintf(out_h, "#define CONFIG_%s \"", sym->name);
+ while (1) {
+ l = strcspn(str, "\"\\");
+ if (l) {
+ fwrite(str, l, 1, out);
+ fwrite(str, l, 1, out_h);
+ str += l;
+ }
+ if (!*str)
+ break;
+ fprintf(out, "\\%c", *str);
+ fprintf(out_h, "\\%c", *str);
+ str++;
+ }
+ fputs("\"\n", out);
+ fputs("\"\n", out_h);
+ break;
+ case S_HEX:
+ str = sym_get_string_value(sym);
+ if (str[0] != '0' || (str[1] != 'x' && str[1] != 'X')) {
+ fprintf(out, "CONFIG_%s=%s\n", sym->name, str);
+ fprintf(out_h, "#define CONFIG_%s 0x%s\n", sym->name, str);
+ break;
+ }
+ case S_INT:
+ str = sym_get_string_value(sym);
+ fprintf(out, "CONFIG_%s=%s\n", sym->name, str);
+ fprintf(out_h, "#define CONFIG_%s %s\n", sym->name, str);
+ break;
+ default:
+ break;
+ }
+ }
+ fclose(out);
+ fclose(out_h);
+
+ name = getenv("KCONFIG_AUTOHEADER");
+ if (!name)
+ name = "include/linux/autoconf.h";
+ if (rename(".tmpconfig.h", name))
+ return 1;
+ name = getenv("KCONFIG_AUTOCONFIG");
+ if (!name)
+ name = "include/config/auto.conf";
+ /*
+ * This must be the last step, kbuild has a dependency on auto.conf
+ * and this marks the successful completion of the previous steps.
+ */
+ if (rename(".tmpconfig", name))
+ return 1;
+
+ return 0;
+}
+
+static int sym_change_count;
+static void (*conf_changed_callback)(void);
+
+void sym_set_change_count(int count)
+{
+ int _sym_change_count = sym_change_count;
+ sym_change_count = count;
+ if (conf_changed_callback &&
+ (bool)_sym_change_count != (bool)count)
+ conf_changed_callback();
+}
+
+void sym_add_change_count(int count)
+{
+ sym_set_change_count(count + sym_change_count);
+}
+
+bool conf_get_changed(void)
+{
+ return sym_change_count;
+}
+
+void conf_set_changed_callback(void (*fn)(void))
+{
+ conf_changed_callback = fn;
+}
diff --git a/util/kconfig/expr.c b/util/kconfig/expr.c
new file mode 100644
index 0000000..579ece4
--- /dev/null
+++ b/util/kconfig/expr.c
@@ -0,0 +1,1106 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+#define DEBUG_EXPR 0
+
+struct expr *expr_alloc_symbol(struct symbol *sym)
+{
+ struct expr *e = malloc(sizeof(*e));
+ memset(e, 0, sizeof(*e));
+ e->type = E_SYMBOL;
+ e->left.sym = sym;
+ return e;
+}
+
+struct expr *expr_alloc_one(enum expr_type type, struct expr *ce)
+{
+ struct expr *e = malloc(sizeof(*e));
+ memset(e, 0, sizeof(*e));
+ e->type = type;
+ e->left.expr = ce;
+ return e;
+}
+
+struct expr *expr_alloc_two(enum expr_type type, struct expr *e1, struct expr *e2)
+{
+ struct expr *e = malloc(sizeof(*e));
+ memset(e, 0, sizeof(*e));
+ e->type = type;
+ e->left.expr = e1;
+ e->right.expr = e2;
+ return e;
+}
+
+struct expr *expr_alloc_comp(enum expr_type type, struct symbol *s1, struct symbol *s2)
+{
+ struct expr *e = malloc(sizeof(*e));
+ memset(e, 0, sizeof(*e));
+ e->type = type;
+ e->left.sym = s1;
+ e->right.sym = s2;
+ return e;
+}
+
+struct expr *expr_alloc_and(struct expr *e1, struct expr *e2)
+{
+ if (!e1)
+ return e2;
+ return e2 ? expr_alloc_two(E_AND, e1, e2) : e1;
+}
+
+struct expr *expr_alloc_or(struct expr *e1, struct expr *e2)
+{
+ if (!e1)
+ return e2;
+ return e2 ? expr_alloc_two(E_OR, e1, e2) : e1;
+}
+
+struct expr *expr_copy(struct expr *org)
+{
+ struct expr *e;
+
+ if (!org)
+ return NULL;
+
+ e = malloc(sizeof(*org));
+ memcpy(e, org, sizeof(*org));
+ switch (org->type) {
+ case E_SYMBOL:
+ e->left = org->left;
+ break;
+ case E_NOT:
+ e->left.expr = expr_copy(org->left.expr);
+ break;
+ case E_EQUAL:
+ case E_UNEQUAL:
+ e->left.sym = org->left.sym;
+ e->right.sym = org->right.sym;
+ break;
+ case E_AND:
+ case E_OR:
+ case E_LIST:
+ e->left.expr = expr_copy(org->left.expr);
+ e->right.expr = expr_copy(org->right.expr);
+ break;
+ default:
+ printf("can't copy type %d\n", e->type);
+ free(e);
+ e = NULL;
+ break;
+ }
+
+ return e;
+}
+
+void expr_free(struct expr *e)
+{
+ if (!e)
+ return;
+
+ switch (e->type) {
+ case E_SYMBOL:
+ break;
+ case E_NOT:
+ expr_free(e->left.expr);
+ return;
+ case E_EQUAL:
+ case E_UNEQUAL:
+ break;
+ case E_OR:
+ case E_AND:
+ expr_free(e->left.expr);
+ expr_free(e->right.expr);
+ break;
+ default:
+ printf("how to free type %d?\n", e->type);
+ break;
+ }
+ free(e);
+}
+
+static int trans_count;
+
+#define e1 (*ep1)
+#define e2 (*ep2)
+
+static void __expr_eliminate_eq(enum expr_type type, struct expr **ep1, struct expr **ep2)
+{
+ if (e1->type == type) {
+ __expr_eliminate_eq(type, &e1->left.expr, &e2);
+ __expr_eliminate_eq(type, &e1->right.expr, &e2);
+ return;
+ }
+ if (e2->type == type) {
+ __expr_eliminate_eq(type, &e1, &e2->left.expr);
+ __expr_eliminate_eq(type, &e1, &e2->right.expr);
+ return;
+ }
+ if (e1->type == E_SYMBOL && e2->type == E_SYMBOL &&
+ e1->left.sym == e2->left.sym &&
+ (e1->left.sym == &symbol_yes || e1->left.sym == &symbol_no))
+ return;
+ if (!expr_eq(e1, e2))
+ return;
+ trans_count++;
+ expr_free(e1); expr_free(e2);
+ switch (type) {
+ case E_OR:
+ e1 = expr_alloc_symbol(&symbol_no);
+ e2 = expr_alloc_symbol(&symbol_no);
+ break;
+ case E_AND:
+ e1 = expr_alloc_symbol(&symbol_yes);
+ e2 = expr_alloc_symbol(&symbol_yes);
+ break;
+ default:
+ ;
+ }
+}
+
+void expr_eliminate_eq(struct expr **ep1, struct expr **ep2)
+{
+ if (!e1 || !e2)
+ return;
+ switch (e1->type) {
+ case E_OR:
+ case E_AND:
+ __expr_eliminate_eq(e1->type, ep1, ep2);
+ default:
+ ;
+ }
+ if (e1->type != e2->type) switch (e2->type) {
+ case E_OR:
+ case E_AND:
+ __expr_eliminate_eq(e2->type, ep1, ep2);
+ default:
+ ;
+ }
+ e1 = expr_eliminate_yn(e1);
+ e2 = expr_eliminate_yn(e2);
+}
+
+#undef e1
+#undef e2
+
+int expr_eq(struct expr *e1, struct expr *e2)
+{
+ int res, old_count;
+
+ if (e1->type != e2->type)
+ return 0;
+ switch (e1->type) {
+ case E_EQUAL:
+ case E_UNEQUAL:
+ return e1->left.sym == e2->left.sym && e1->right.sym == e2->right.sym;
+ case E_SYMBOL:
+ return e1->left.sym == e2->left.sym;
+ case E_NOT:
+ return expr_eq(e1->left.expr, e2->left.expr);
+ case E_AND:
+ case E_OR:
+ e1 = expr_copy(e1);
+ e2 = expr_copy(e2);
+ old_count = trans_count;
+ expr_eliminate_eq(&e1, &e2);
+ res = (e1->type == E_SYMBOL && e2->type == E_SYMBOL &&
+ e1->left.sym == e2->left.sym);
+ expr_free(e1);
+ expr_free(e2);
+ trans_count = old_count;
+ return res;
+ case E_LIST:
+ case E_RANGE:
+ case E_NONE:
+ /* panic */;
+ }
+
+ if (DEBUG_EXPR) {
+ expr_fprint(e1, stdout);
+ printf(" = ");
+ expr_fprint(e2, stdout);
+ printf(" ?\n");
+ }
+
+ return 0;
+}
+
+struct expr *expr_eliminate_yn(struct expr *e)
+{
+ struct expr *tmp;
+
+ if (e) switch (e->type) {
+ case E_AND:
+ e->left.expr = expr_eliminate_yn(e->left.expr);
+ e->right.expr = expr_eliminate_yn(e->right.expr);
+ if (e->left.expr->type == E_SYMBOL) {
+ if (e->left.expr->left.sym == &symbol_no) {
+ expr_free(e->left.expr);
+ expr_free(e->right.expr);
+ e->type = E_SYMBOL;
+ e->left.sym = &symbol_no;
+ e->right.expr = NULL;
+ return e;
+ } else if (e->left.expr->left.sym == &symbol_yes) {
+ free(e->left.expr);
+ tmp = e->right.expr;
+ *e = *(e->right.expr);
+ free(tmp);
+ return e;
+ }
+ }
+ if (e->right.expr->type == E_SYMBOL) {
+ if (e->right.expr->left.sym == &symbol_no) {
+ expr_free(e->left.expr);
+ expr_free(e->right.expr);
+ e->type = E_SYMBOL;
+ e->left.sym = &symbol_no;
+ e->right.expr = NULL;
+ return e;
+ } else if (e->right.expr->left.sym == &symbol_yes) {
+ free(e->right.expr);
+ tmp = e->left.expr;
+ *e = *(e->left.expr);
+ free(tmp);
+ return e;
+ }
+ }
+ break;
+ case E_OR:
+ e->left.expr = expr_eliminate_yn(e->left.expr);
+ e->right.expr = expr_eliminate_yn(e->right.expr);
+ if (e->left.expr->type == E_SYMBOL) {
+ if (e->left.expr->left.sym == &symbol_no) {
+ free(e->left.expr);
+ tmp = e->right.expr;
+ *e = *(e->right.expr);
+ free(tmp);
+ return e;
+ } else if (e->left.expr->left.sym == &symbol_yes) {
+ expr_free(e->left.expr);
+ expr_free(e->right.expr);
+ e->type = E_SYMBOL;
+ e->left.sym = &symbol_yes;
+ e->right.expr = NULL;
+ return e;
+ }
+ }
+ if (e->right.expr->type == E_SYMBOL) {
+ if (e->right.expr->left.sym == &symbol_no) {
+ free(e->right.expr);
+ tmp = e->left.expr;
+ *e = *(e->left.expr);
+ free(tmp);
+ return e;
+ } else if (e->right.expr->left.sym == &symbol_yes) {
+ expr_free(e->left.expr);
+ expr_free(e->right.expr);
+ e->type = E_SYMBOL;
+ e->left.sym = &symbol_yes;
+ e->right.expr = NULL;
+ return e;
+ }
+ }
+ break;
+ default:
+ ;
+ }
+ return e;
+}
+
+/*
+ * bool FOO!=n => FOO
+ */
+struct expr *expr_trans_bool(struct expr *e)
+{
+ if (!e)
+ return NULL;
+ switch (e->type) {
+ case E_AND:
+ case E_OR:
+ case E_NOT:
+ e->left.expr = expr_trans_bool(e->left.expr);
+ e->right.expr = expr_trans_bool(e->right.expr);
+ break;
+ case E_UNEQUAL:
+ // FOO!=n -> FOO
+ if (e->left.sym->type == S_TRISTATE) {
+ if (e->right.sym == &symbol_no) {
+ e->type = E_SYMBOL;
+ e->right.sym = NULL;
+ }
+ }
+ break;
+ default:
+ ;
+ }
+ return e;
+}
+
+/*
+ * e1 || e2 -> ?
+ */
+struct expr *expr_join_or(struct expr *e1, struct expr *e2)
+{
+ struct expr *tmp;
+ struct symbol *sym1, *sym2;
+
+ if (expr_eq(e1, e2))
+ return expr_copy(e1);
+ if (e1->type != E_EQUAL && e1->type != E_UNEQUAL && e1->type != E_SYMBOL && e1->type != E_NOT)
+ return NULL;
+ if (e2->type != E_EQUAL && e2->type != E_UNEQUAL && e2->type != E_SYMBOL && e2->type != E_NOT)
+ return NULL;
+ if (e1->type == E_NOT) {
+ tmp = e1->left.expr;
+ if (tmp->type != E_EQUAL && tmp->type != E_UNEQUAL && tmp->type != E_SYMBOL)
+ return NULL;
+ sym1 = tmp->left.sym;
+ } else
+ sym1 = e1->left.sym;
+ if (e2->type == E_NOT) {
+ if (e2->left.expr->type != E_SYMBOL)
+ return NULL;
+ sym2 = e2->left.expr->left.sym;
+ } else
+ sym2 = e2->left.sym;
+ if (sym1 != sym2)
+ return NULL;
+ if (sym1->type != S_BOOLEAN && sym1->type != S_TRISTATE)
+ return NULL;
+ if (sym1->type == S_TRISTATE) {
+ if (e1->type == E_EQUAL && e2->type == E_EQUAL &&
+ ((e1->right.sym == &symbol_yes && e2->right.sym == &symbol_mod) ||
+ (e1->right.sym == &symbol_mod && e2->right.sym == &symbol_yes))) {
+ // (a='y') || (a='m') -> (a!='n')
+ return expr_alloc_comp(E_UNEQUAL, sym1, &symbol_no);
+ }
+ if (e1->type == E_EQUAL && e2->type == E_EQUAL &&
+ ((e1->right.sym == &symbol_yes && e2->right.sym == &symbol_no) ||
+ (e1->right.sym == &symbol_no && e2->right.sym == &symbol_yes))) {
+ // (a='y') || (a='n') -> (a!='m')
+ return expr_alloc_comp(E_UNEQUAL, sym1, &symbol_mod);
+ }
+ if (e1->type == E_EQUAL && e2->type == E_EQUAL &&
+ ((e1->right.sym == &symbol_mod && e2->right.sym == &symbol_no) ||
+ (e1->right.sym == &symbol_no && e2->right.sym == &symbol_mod))) {
+ // (a='m') || (a='n') -> (a!='y')
+ return expr_alloc_comp(E_UNEQUAL, sym1, &symbol_yes);
+ }
+ }
+ if (sym1->type == S_BOOLEAN && sym1 == sym2) {
+ if ((e1->type == E_NOT && e1->left.expr->type == E_SYMBOL && e2->type == E_SYMBOL) ||
+ (e2->type == E_NOT && e2->left.expr->type == E_SYMBOL && e1->type == E_SYMBOL))
+ return expr_alloc_symbol(&symbol_yes);
+ }
+
+ if (DEBUG_EXPR) {
+ printf("optimize (");
+ expr_fprint(e1, stdout);
+ printf(") || (");
+ expr_fprint(e2, stdout);
+ printf(")?\n");
+ }
+ return NULL;
+}
+
+struct expr *expr_join_and(struct expr *e1, struct expr *e2)
+{
+ struct expr *tmp;
+ struct symbol *sym1, *sym2;
+
+ if (expr_eq(e1, e2))
+ return expr_copy(e1);
+ if (e1->type != E_EQUAL && e1->type != E_UNEQUAL && e1->type != E_SYMBOL && e1->type != E_NOT)
+ return NULL;
+ if (e2->type != E_EQUAL && e2->type != E_UNEQUAL && e2->type != E_SYMBOL && e2->type != E_NOT)
+ return NULL;
+ if (e1->type == E_NOT) {
+ tmp = e1->left.expr;
+ if (tmp->type != E_EQUAL && tmp->type != E_UNEQUAL && tmp->type != E_SYMBOL)
+ return NULL;
+ sym1 = tmp->left.sym;
+ } else
+ sym1 = e1->left.sym;
+ if (e2->type == E_NOT) {
+ if (e2->left.expr->type != E_SYMBOL)
+ return NULL;
+ sym2 = e2->left.expr->left.sym;
+ } else
+ sym2 = e2->left.sym;
+ if (sym1 != sym2)
+ return NULL;
+ if (sym1->type != S_BOOLEAN && sym1->type != S_TRISTATE)
+ return NULL;
+
+ if ((e1->type == E_SYMBOL && e2->type == E_EQUAL && e2->right.sym == &symbol_yes) ||
+ (e2->type == E_SYMBOL && e1->type == E_EQUAL && e1->right.sym == &symbol_yes))
+ // (a) && (a='y') -> (a='y')
+ return expr_alloc_comp(E_EQUAL, sym1, &symbol_yes);
+
+ if ((e1->type == E_SYMBOL && e2->type == E_UNEQUAL && e2->right.sym == &symbol_no) ||
+ (e2->type == E_SYMBOL && e1->type == E_UNEQUAL && e1->right.sym == &symbol_no))
+ // (a) && (a!='n') -> (a)
+ return expr_alloc_symbol(sym1);
+
+ if ((e1->type == E_SYMBOL && e2->type == E_UNEQUAL && e2->right.sym == &symbol_mod) ||
+ (e2->type == E_SYMBOL && e1->type == E_UNEQUAL && e1->right.sym == &symbol_mod))
+ // (a) && (a!='m') -> (a='y')
+ return expr_alloc_comp(E_EQUAL, sym1, &symbol_yes);
+
+ if (sym1->type == S_TRISTATE) {
+ if (e1->type == E_EQUAL && e2->type == E_UNEQUAL) {
+ // (a='b') && (a!='c') -> 'b'='c' ? 'n' : a='b'
+ sym2 = e1->right.sym;
+ if ((e2->right.sym->flags & SYMBOL_CONST) && (sym2->flags & SYMBOL_CONST))
+ return sym2 != e2->right.sym ? expr_alloc_comp(E_EQUAL, sym1, sym2)
+ : expr_alloc_symbol(&symbol_no);
+ }
+ if (e1->type == E_UNEQUAL && e2->type == E_EQUAL) {
+ // (a='b') && (a!='c') -> 'b'='c' ? 'n' : a='b'
+ sym2 = e2->right.sym;
+ if ((e1->right.sym->flags & SYMBOL_CONST) && (sym2->flags & SYMBOL_CONST))
+ return sym2 != e1->right.sym ? expr_alloc_comp(E_EQUAL, sym1, sym2)
+ : expr_alloc_symbol(&symbol_no);
+ }
+ if (e1->type == E_UNEQUAL && e2->type == E_UNEQUAL &&
+ ((e1->right.sym == &symbol_yes && e2->right.sym == &symbol_no) ||
+ (e1->right.sym == &symbol_no && e2->right.sym == &symbol_yes)))
+ // (a!='y') && (a!='n') -> (a='m')
+ return expr_alloc_comp(E_EQUAL, sym1, &symbol_mod);
+
+ if (e1->type == E_UNEQUAL && e2->type == E_UNEQUAL &&
+ ((e1->right.sym == &symbol_yes && e2->right.sym == &symbol_mod) ||
+ (e1->right.sym == &symbol_mod && e2->right.sym == &symbol_yes)))
+ // (a!='y') && (a!='m') -> (a='n')
+ return expr_alloc_comp(E_EQUAL, sym1, &symbol_no);
+
+ if (e1->type == E_UNEQUAL && e2->type == E_UNEQUAL &&
+ ((e1->right.sym == &symbol_mod && e2->right.sym == &symbol_no) ||
+ (e1->right.sym == &symbol_no && e2->right.sym == &symbol_mod)))
+ // (a!='m') && (a!='n') -> (a='m')
+ return expr_alloc_comp(E_EQUAL, sym1, &symbol_yes);
+
+ if ((e1->type == E_SYMBOL && e2->type == E_EQUAL && e2->right.sym == &symbol_mod) ||
+ (e2->type == E_SYMBOL && e1->type == E_EQUAL && e1->right.sym == &symbol_mod) ||
+ (e1->type == E_SYMBOL && e2->type == E_UNEQUAL && e2->right.sym == &symbol_yes) ||
+ (e2->type == E_SYMBOL && e1->type == E_UNEQUAL && e1->right.sym == &symbol_yes))
+ return NULL;
+ }
+
+ if (DEBUG_EXPR) {
+ printf("optimize (");
+ expr_fprint(e1, stdout);
+ printf(") && (");
+ expr_fprint(e2, stdout);
+ printf(")?\n");
+ }
+ return NULL;
+}
+
+static void expr_eliminate_dups1(enum expr_type type, struct expr **ep1, struct expr **ep2)
+{
+#define e1 (*ep1)
+#define e2 (*ep2)
+ struct expr *tmp;
+
+ if (e1->type == type) {
+ expr_eliminate_dups1(type, &e1->left.expr, &e2);
+ expr_eliminate_dups1(type, &e1->right.expr, &e2);
+ return;
+ }
+ if (e2->type == type) {
+ expr_eliminate_dups1(type, &e1, &e2->left.expr);
+ expr_eliminate_dups1(type, &e1, &e2->right.expr);
+ return;
+ }
+ if (e1 == e2)
+ return;
+
+ switch (e1->type) {
+ case E_OR: case E_AND:
+ expr_eliminate_dups1(e1->type, &e1, &e1);
+ default:
+ ;
+ }
+
+ switch (type) {
+ case E_OR:
+ tmp = expr_join_or(e1, e2);
+ if (tmp) {
+ expr_free(e1); expr_free(e2);
+ e1 = expr_alloc_symbol(&symbol_no);
+ e2 = tmp;
+ trans_count++;
+ }
+ break;
+ case E_AND:
+ tmp = expr_join_and(e1, e2);
+ if (tmp) {
+ expr_free(e1); expr_free(e2);
+ e1 = expr_alloc_symbol(&symbol_yes);
+ e2 = tmp;
+ trans_count++;
+ }
+ break;
+ default:
+ ;
+ }
+#undef e1
+#undef e2
+}
+
+static void expr_eliminate_dups2(enum expr_type type, struct expr **ep1, struct expr **ep2)
+{
+#define e1 (*ep1)
+#define e2 (*ep2)
+ struct expr *tmp, *tmp1, *tmp2;
+
+ if (e1->type == type) {
+ expr_eliminate_dups2(type, &e1->left.expr, &e2);
+ expr_eliminate_dups2(type, &e1->right.expr, &e2);
+ return;
+ }
+ if (e2->type == type) {
+ expr_eliminate_dups2(type, &e1, &e2->left.expr);
+ expr_eliminate_dups2(type, &e1, &e2->right.expr);
+ }
+ if (e1 == e2)
+ return;
+
+ switch (e1->type) {
+ case E_OR:
+ expr_eliminate_dups2(e1->type, &e1, &e1);
+ // (FOO || BAR) && (!FOO && !BAR) -> n
+ tmp1 = expr_transform(expr_alloc_one(E_NOT, expr_copy(e1)));
+ tmp2 = expr_copy(e2);
+ tmp = expr_extract_eq_and(&tmp1, &tmp2);
+ if (expr_is_yes(tmp1)) {
+ expr_free(e1);
+ e1 = expr_alloc_symbol(&symbol_no);
+ trans_count++;
+ }
+ expr_free(tmp2);
+ expr_free(tmp1);
+ expr_free(tmp);
+ break;
+ case E_AND:
+ expr_eliminate_dups2(e1->type, &e1, &e1);
+ // (FOO && BAR) || (!FOO || !BAR) -> y
+ tmp1 = expr_transform(expr_alloc_one(E_NOT, expr_copy(e1)));
+ tmp2 = expr_copy(e2);
+ tmp = expr_extract_eq_or(&tmp1, &tmp2);
+ if (expr_is_no(tmp1)) {
+ expr_free(e1);
+ e1 = expr_alloc_symbol(&symbol_yes);
+ trans_count++;
+ }
+ expr_free(tmp2);
+ expr_free(tmp1);
+ expr_free(tmp);
+ break;
+ default:
+ ;
+ }
+#undef e1
+#undef e2
+}
+
+struct expr *expr_eliminate_dups(struct expr *e)
+{
+ int oldcount;
+ if (!e)
+ return e;
+
+ oldcount = trans_count;
+ while (1) {
+ trans_count = 0;
+ switch (e->type) {
+ case E_OR: case E_AND:
+ expr_eliminate_dups1(e->type, &e, &e);
+ expr_eliminate_dups2(e->type, &e, &e);
+ default:
+ ;
+ }
+ if (!trans_count)
+ break;
+ e = expr_eliminate_yn(e);
+ }
+ trans_count = oldcount;
+ return e;
+}
+
+struct expr *expr_transform(struct expr *e)
+{
+ struct expr *tmp;
+
+ if (!e)
+ return NULL;
+ switch (e->type) {
+ case E_EQUAL:
+ case E_UNEQUAL:
+ case E_SYMBOL:
+ case E_LIST:
+ break;
+ default:
+ e->left.expr = expr_transform(e->left.expr);
+ e->right.expr = expr_transform(e->right.expr);
+ }
+
+ switch (e->type) {
+ case E_EQUAL:
+ if (e->left.sym->type != S_BOOLEAN)
+ break;
+ if (e->right.sym == &symbol_no) {
+ e->type = E_NOT;
+ e->left.expr = expr_alloc_symbol(e->left.sym);
+ e->right.sym = NULL;
+ break;
+ }
+ if (e->right.sym == &symbol_mod) {
+ printf("boolean symbol %s tested for 'm'? test forced to 'n'\n", e->left.sym->name);
+ e->type = E_SYMBOL;
+ e->left.sym = &symbol_no;
+ e->right.sym = NULL;
+ break;
+ }
+ if (e->right.sym == &symbol_yes) {
+ e->type = E_SYMBOL;
+ e->right.sym = NULL;
+ break;
+ }
+ break;
+ case E_UNEQUAL:
+ if (e->left.sym->type != S_BOOLEAN)
+ break;
+ if (e->right.sym == &symbol_no) {
+ e->type = E_SYMBOL;
+ e->right.sym = NULL;
+ break;
+ }
+ if (e->right.sym == &symbol_mod) {
+ printf("boolean symbol %s tested for 'm'? test forced to 'y'\n", e->left.sym->name);
+ e->type = E_SYMBOL;
+ e->left.sym = &symbol_yes;
+ e->right.sym = NULL;
+ break;
+ }
+ if (e->right.sym == &symbol_yes) {
+ e->type = E_NOT;
+ e->left.expr = expr_alloc_symbol(e->left.sym);
+ e->right.sym = NULL;
+ break;
+ }
+ break;
+ case E_NOT:
+ switch (e->left.expr->type) {
+ case E_NOT:
+ // !!a -> a
+ tmp = e->left.expr->left.expr;
+ free(e->left.expr);
+ free(e);
+ e = tmp;
+ e = expr_transform(e);
+ break;
+ case E_EQUAL:
+ case E_UNEQUAL:
+ // !a='x' -> a!='x'
+ tmp = e->left.expr;
+ free(e);
+ e = tmp;
+ e->type = e->type == E_EQUAL ? E_UNEQUAL : E_EQUAL;
+ break;
+ case E_OR:
+ // !(a || b) -> !a && !b
+ tmp = e->left.expr;
+ e->type = E_AND;
+ e->right.expr = expr_alloc_one(E_NOT, tmp->right.expr);
+ tmp->type = E_NOT;
+ tmp->right.expr = NULL;
+ e = expr_transform(e);
+ break;
+ case E_AND:
+ // !(a && b) -> !a || !b
+ tmp = e->left.expr;
+ e->type = E_OR;
+ e->right.expr = expr_alloc_one(E_NOT, tmp->right.expr);
+ tmp->type = E_NOT;
+ tmp->right.expr = NULL;
+ e = expr_transform(e);
+ break;
+ case E_SYMBOL:
+ if (e->left.expr->left.sym == &symbol_yes) {
+ // !'y' -> 'n'
+ tmp = e->left.expr;
+ free(e);
+ e = tmp;
+ e->type = E_SYMBOL;
+ e->left.sym = &symbol_no;
+ break;
+ }
+ if (e->left.expr->left.sym == &symbol_mod) {
+ // !'m' -> 'm'
+ tmp = e->left.expr;
+ free(e);
+ e = tmp;
+ e->type = E_SYMBOL;
+ e->left.sym = &symbol_mod;
+ break;
+ }
+ if (e->left.expr->left.sym == &symbol_no) {
+ // !'n' -> 'y'
+ tmp = e->left.expr;
+ free(e);
+ e = tmp;
+ e->type = E_SYMBOL;
+ e->left.sym = &symbol_yes;
+ break;
+ }
+ break;
+ default:
+ ;
+ }
+ break;
+ default:
+ ;
+ }
+ return e;
+}
+
+int expr_contains_symbol(struct expr *dep, struct symbol *sym)
+{
+ if (!dep)
+ return 0;
+
+ switch (dep->type) {
+ case E_AND:
+ case E_OR:
+ return expr_contains_symbol(dep->left.expr, sym) ||
+ expr_contains_symbol(dep->right.expr, sym);
+ case E_SYMBOL:
+ return dep->left.sym == sym;
+ case E_EQUAL:
+ case E_UNEQUAL:
+ return dep->left.sym == sym ||
+ dep->right.sym == sym;
+ case E_NOT:
+ return expr_contains_symbol(dep->left.expr, sym);
+ default:
+ ;
+ }
+ return 0;
+}
+
+bool expr_depends_symbol(struct expr *dep, struct symbol *sym)
+{
+ if (!dep)
+ return false;
+
+ switch (dep->type) {
+ case E_AND:
+ return expr_depends_symbol(dep->left.expr, sym) ||
+ expr_depends_symbol(dep->right.expr, sym);
+ case E_SYMBOL:
+ return dep->left.sym == sym;
+ case E_EQUAL:
+ if (dep->left.sym == sym) {
+ if (dep->right.sym == &symbol_yes || dep->right.sym == &symbol_mod)
+ return true;
+ }
+ break;
+ case E_UNEQUAL:
+ if (dep->left.sym == sym) {
+ if (dep->right.sym == &symbol_no)
+ return true;
+ }
+ break;
+ default:
+ ;
+ }
+ return false;
+}
+
+struct expr *expr_extract_eq_and(struct expr **ep1, struct expr **ep2)
+{
+ struct expr *tmp = NULL;
+ expr_extract_eq(E_AND, &tmp, ep1, ep2);
+ if (tmp) {
+ *ep1 = expr_eliminate_yn(*ep1);
+ *ep2 = expr_eliminate_yn(*ep2);
+ }
+ return tmp;
+}
+
+struct expr *expr_extract_eq_or(struct expr **ep1, struct expr **ep2)
+{
+ struct expr *tmp = NULL;
+ expr_extract_eq(E_OR, &tmp, ep1, ep2);
+ if (tmp) {
+ *ep1 = expr_eliminate_yn(*ep1);
+ *ep2 = expr_eliminate_yn(*ep2);
+ }
+ return tmp;
+}
+
+void expr_extract_eq(enum expr_type type, struct expr **ep, struct expr **ep1, struct expr **ep2)
+{
+#define e1 (*ep1)
+#define e2 (*ep2)
+ if (e1->type == type) {
+ expr_extract_eq(type, ep, &e1->left.expr, &e2);
+ expr_extract_eq(type, ep, &e1->right.expr, &e2);
+ return;
+ }
+ if (e2->type == type) {
+ expr_extract_eq(type, ep, ep1, &e2->left.expr);
+ expr_extract_eq(type, ep, ep1, &e2->right.expr);
+ return;
+ }
+ if (expr_eq(e1, e2)) {
+ *ep = *ep ? expr_alloc_two(type, *ep, e1) : e1;
+ expr_free(e2);
+ if (type == E_AND) {
+ e1 = expr_alloc_symbol(&symbol_yes);
+ e2 = expr_alloc_symbol(&symbol_yes);
+ } else if (type == E_OR) {
+ e1 = expr_alloc_symbol(&symbol_no);
+ e2 = expr_alloc_symbol(&symbol_no);
+ }
+ }
+#undef e1
+#undef e2
+}
+
+struct expr *expr_trans_compare(struct expr *e, enum expr_type type, struct symbol *sym)
+{
+ struct expr *e1, *e2;
+
+ if (!e) {
+ e = expr_alloc_symbol(sym);
+ if (type == E_UNEQUAL)
+ e = expr_alloc_one(E_NOT, e);
+ return e;
+ }
+ switch (e->type) {
+ case E_AND:
+ e1 = expr_trans_compare(e->left.expr, E_EQUAL, sym);
+ e2 = expr_trans_compare(e->right.expr, E_EQUAL, sym);
+ if (sym == &symbol_yes)
+ e = expr_alloc_two(E_AND, e1, e2);
+ if (sym == &symbol_no)
+ e = expr_alloc_two(E_OR, e1, e2);
+ if (type == E_UNEQUAL)
+ e = expr_alloc_one(E_NOT, e);
+ return e;
+ case E_OR:
+ e1 = expr_trans_compare(e->left.expr, E_EQUAL, sym);
+ e2 = expr_trans_compare(e->right.expr, E_EQUAL, sym);
+ if (sym == &symbol_yes)
+ e = expr_alloc_two(E_OR, e1, e2);
+ if (sym == &symbol_no)
+ e = expr_alloc_two(E_AND, e1, e2);
+ if (type == E_UNEQUAL)
+ e = expr_alloc_one(E_NOT, e);
+ return e;
+ case E_NOT:
+ return expr_trans_compare(e->left.expr, type == E_EQUAL ? E_UNEQUAL : E_EQUAL, sym);
+ case E_UNEQUAL:
+ case E_EQUAL:
+ if (type == E_EQUAL) {
+ if (sym == &symbol_yes)
+ return expr_copy(e);
+ if (sym == &symbol_mod)
+ return expr_alloc_symbol(&symbol_no);
+ if (sym == &symbol_no)
+ return expr_alloc_one(E_NOT, expr_copy(e));
+ } else {
+ if (sym == &symbol_yes)
+ return expr_alloc_one(E_NOT, expr_copy(e));
+ if (sym == &symbol_mod)
+ return expr_alloc_symbol(&symbol_yes);
+ if (sym == &symbol_no)
+ return expr_copy(e);
+ }
+ break;
+ case E_SYMBOL:
+ return expr_alloc_comp(type, e->left.sym, sym);
+ case E_LIST:
+ case E_RANGE:
+ case E_NONE:
+ /* panic */;
+ }
+ return NULL;
+}
+
+tristate expr_calc_value(struct expr *e)
+{
+ tristate val1, val2;
+ const char *str1, *str2;
+
+ if (!e)
+ return yes;
+
+ switch (e->type) {
+ case E_SYMBOL:
+ sym_calc_value(e->left.sym);
+ return e->left.sym->curr.tri;
+ case E_AND:
+ val1 = expr_calc_value(e->left.expr);
+ val2 = expr_calc_value(e->right.expr);
+ return EXPR_AND(val1, val2);
+ case E_OR:
+ val1 = expr_calc_value(e->left.expr);
+ val2 = expr_calc_value(e->right.expr);
+ return EXPR_OR(val1, val2);
+ case E_NOT:
+ val1 = expr_calc_value(e->left.expr);
+ return EXPR_NOT(val1);
+ case E_EQUAL:
+ sym_calc_value(e->left.sym);
+ sym_calc_value(e->right.sym);
+ str1 = sym_get_string_value(e->left.sym);
+ str2 = sym_get_string_value(e->right.sym);
+ return !strcmp(str1, str2) ? yes : no;
+ case E_UNEQUAL:
+ sym_calc_value(e->left.sym);
+ sym_calc_value(e->right.sym);
+ str1 = sym_get_string_value(e->left.sym);
+ str2 = sym_get_string_value(e->right.sym);
+ return !strcmp(str1, str2) ? no : yes;
+ default:
+ printf("expr_calc_value: %d?\n", e->type);
+ return no;
+ }
+}
+
+int expr_compare_type(enum expr_type t1, enum expr_type t2)
+{
+#if 0
+ return 1;
+#else
+ if (t1 == t2)
+ return 0;
+ switch (t1) {
+ case E_EQUAL:
+ case E_UNEQUAL:
+ if (t2 == E_NOT)
+ return 1;
+ case E_NOT:
+ if (t2 == E_AND)
+ return 1;
+ case E_AND:
+ if (t2 == E_OR)
+ return 1;
+ case E_OR:
+ if (t2 == E_LIST)
+ return 1;
+ case E_LIST:
+ if (t2 == 0)
+ return 1;
+ default:
+ return -1;
+ }
+ printf("[%dgt%d?]", t1, t2);
+ return 0;
+#endif
+}
+
+void expr_print(struct expr *e, void (*fn)(void *, struct symbol *, const char *), void *data, int prevtoken)
+{
+ if (!e) {
+ fn(data, NULL, "y");
+ return;
+ }
+
+ if (expr_compare_type(prevtoken, e->type) > 0)
+ fn(data, NULL, "(");
+ switch (e->type) {
+ case E_SYMBOL:
+ if (e->left.sym->name)
+ fn(data, e->left.sym, e->left.sym->name);
+ else
+ fn(data, NULL, "<choice>");
+ break;
+ case E_NOT:
+ fn(data, NULL, "!");
+ expr_print(e->left.expr, fn, data, E_NOT);
+ break;
+ case E_EQUAL:
+ if (e->left.sym->name)
+ fn(data, e->left.sym, e->left.sym->name);
+ else
+ fn(data, NULL, "<choice>");
+ fn(data, NULL, "=");
+ fn(data, e->right.sym, e->right.sym->name);
+ break;
+ case E_UNEQUAL:
+ if (e->left.sym->name)
+ fn(data, e->left.sym, e->left.sym->name);
+ else
+ fn(data, NULL, "<choice>");
+ fn(data, NULL, "!=");
+ fn(data, e->right.sym, e->right.sym->name);
+ break;
+ case E_OR:
+ expr_print(e->left.expr, fn, data, E_OR);
+ fn(data, NULL, " || ");
+ expr_print(e->right.expr, fn, data, E_OR);
+ break;
+ case E_AND:
+ expr_print(e->left.expr, fn, data, E_AND);
+ fn(data, NULL, " && ");
+ expr_print(e->right.expr, fn, data, E_AND);
+ break;
+ case E_LIST:
+ fn(data, e->right.sym, e->right.sym->name);
+ if (e->left.expr) {
+ fn(data, NULL, " ^ ");
+ expr_print(e->left.expr, fn, data, E_LIST);
+ }
+ break;
+ case E_RANGE:
+ fn(data, NULL, "[");
+ fn(data, e->left.sym, e->left.sym->name);
+ fn(data, NULL, " ");
+ fn(data, e->right.sym, e->right.sym->name);
+ fn(data, NULL, "]");
+ break;
+ default:
+ {
+ char buf[32];
+ sprintf(buf, "<unknown type %d>", e->type);
+ fn(data, NULL, buf);
+ break;
+ }
+ }
+ if (expr_compare_type(prevtoken, e->type) > 0)
+ fn(data, NULL, ")");
+}
+
+static void expr_print_file_helper(void *data, struct symbol *sym, const char *str)
+{
+ fwrite(str, strlen(str), 1, data);
+}
+
+void expr_fprint(struct expr *e, FILE *out)
+{
+ expr_print(e, expr_print_file_helper, out, E_NONE);
+}
+
+static void expr_print_gstr_helper(void *data, struct symbol *sym, const char *str)
+{
+ str_append((struct gstr*)data, str);
+}
+
+void expr_gstr_print(struct expr *e, struct gstr *gs)
+{
+ expr_print(e, expr_print_gstr_helper, gs, E_NONE);
+}
diff --git a/util/kconfig/expr.h b/util/kconfig/expr.h
new file mode 100644
index 0000000..25ec05e
--- /dev/null
+++ b/util/kconfig/expr.h
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#ifndef EXPR_H
+#define EXPR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdio.h>
+#ifndef __cplusplus
+#ifndef __sun
+#include <stdbool.h>
+#else
+typedef short bool;
+enum { true=1, false=0};
+#endif
+#endif
+
+struct file {
+ struct file *next;
+ struct file *parent;
+ char *name;
+ int lineno;
+ int flags;
+};
+
+#define FILE_BUSY 0x0001
+#define FILE_SCANNED 0x0002
+
+typedef enum tristate {
+ no, mod, yes
+} tristate;
+
+enum expr_type {
+ E_NONE, E_OR, E_AND, E_NOT, E_EQUAL, E_UNEQUAL, E_LIST, E_SYMBOL, E_RANGE
+};
+
+union expr_data {
+ struct expr *expr;
+ struct symbol *sym;
+};
+
+struct expr {
+ enum expr_type type;
+ union expr_data left, right;
+};
+
+#define EXPR_OR(dep1, dep2) (((dep1)>(dep2))?(dep1):(dep2))
+#define EXPR_AND(dep1, dep2) (((dep1)<(dep2))?(dep1):(dep2))
+#define EXPR_NOT(dep) (2-(dep))
+
+#define expr_list_for_each_sym(l, e, s) \
+ for (e = (l); e && (s = e->right.sym); e = e->left.expr)
+
+struct expr_value {
+ struct expr *expr;
+ tristate tri;
+};
+
+struct symbol_value {
+ void *val;
+ tristate tri;
+};
+
+enum symbol_type {
+ S_UNKNOWN, S_BOOLEAN, S_TRISTATE, S_INT, S_HEX, S_STRING, S_OTHER
+};
+
+enum {
+ S_DEF_USER, /* main user value */
+ S_DEF_AUTO,
+};
+
+struct symbol {
+ struct symbol *next;
+ char *name;
+ enum symbol_type type;
+ struct symbol_value curr;
+ struct symbol_value def[4];
+ tristate visible;
+ int flags;
+ struct property *prop;
+ struct expr_value rev_dep;
+};
+
+#define for_all_symbols(i, sym) for (i = 0; i < 257; i++) for (sym = symbol_hash[i]; sym; sym = sym->next) if (sym->type != S_OTHER)
+
+#define SYMBOL_CONST 0x0001
+#define SYMBOL_CHECK 0x0008
+#define SYMBOL_CHOICE 0x0010
+#define SYMBOL_CHOICEVAL 0x0020
+#define SYMBOL_VALID 0x0080
+#define SYMBOL_OPTIONAL 0x0100
+#define SYMBOL_WRITE 0x0200
+#define SYMBOL_CHANGED 0x0400
+#define SYMBOL_AUTO 0x1000
+#define SYMBOL_CHECKED 0x2000
+#define SYMBOL_WARNED 0x8000
+#define SYMBOL_DEF 0x10000
+#define SYMBOL_DEF_USER 0x10000
+#define SYMBOL_DEF_AUTO 0x20000
+#define SYMBOL_DEF3 0x40000
+#define SYMBOL_DEF4 0x80000
+
+#define SYMBOL_MAXLENGTH 256
+#define SYMBOL_HASHSIZE 257
+#define SYMBOL_HASHMASK 0xff
+
+enum prop_type {
+ P_UNKNOWN, P_PROMPT, P_COMMENT, P_MENU, P_DEFAULT, P_CHOICE,
+ P_SELECT, P_RANGE, P_ENV
+};
+
+struct property {
+ struct property *next;
+ struct symbol *sym;
+ enum prop_type type;
+ const char *text;
+ struct expr_value visible;
+ struct expr *expr;
+ struct menu *menu;
+ struct file *file;
+ int lineno;
+};
+
+#define for_all_properties(sym, st, tok) \
+ for (st = sym->prop; st; st = st->next) \
+ if (st->type == (tok))
+#define for_all_defaults(sym, st) for_all_properties(sym, st, P_DEFAULT)
+#define for_all_choices(sym, st) for_all_properties(sym, st, P_CHOICE)
+#define for_all_prompts(sym, st) \
+ for (st = sym->prop; st; st = st->next) \
+ if (st->text)
+
+struct menu {
+ struct menu *next;
+ struct menu *parent;
+ struct menu *list;
+ struct symbol *sym;
+ struct property *prompt;
+ struct expr *dep;
+ unsigned int flags;
+ char *help;
+ struct file *file;
+ int lineno;
+ void *data;
+};
+
+#define MENU_CHANGED 0x0001
+#define MENU_ROOT 0x0002
+
+#ifndef SWIG
+
+extern struct file *file_list;
+extern struct file *current_file;
+struct file *lookup_file(const char *name);
+
+extern struct symbol symbol_yes, symbol_no, symbol_mod;
+extern struct symbol *modules_sym;
+extern struct symbol *sym_defconfig_list;
+extern int cdebug;
+struct expr *expr_alloc_symbol(struct symbol *sym);
+struct expr *expr_alloc_one(enum expr_type type, struct expr *ce);
+struct expr *expr_alloc_two(enum expr_type type, struct expr *e1, struct expr *e2);
+struct expr *expr_alloc_comp(enum expr_type type, struct symbol *s1, struct symbol *s2);
+struct expr *expr_alloc_and(struct expr *e1, struct expr *e2);
+struct expr *expr_alloc_or(struct expr *e1, struct expr *e2);
+struct expr *expr_copy(struct expr *org);
+void expr_free(struct expr *e);
+int expr_eq(struct expr *e1, struct expr *e2);
+void expr_eliminate_eq(struct expr **ep1, struct expr **ep2);
+tristate expr_calc_value(struct expr *e);
+struct expr *expr_eliminate_yn(struct expr *e);
+struct expr *expr_trans_bool(struct expr *e);
+struct expr *expr_eliminate_dups(struct expr *e);
+struct expr *expr_transform(struct expr *e);
+int expr_contains_symbol(struct expr *dep, struct symbol *sym);
+bool expr_depends_symbol(struct expr *dep, struct symbol *sym);
+struct expr *expr_extract_eq_and(struct expr **ep1, struct expr **ep2);
+struct expr *expr_extract_eq_or(struct expr **ep1, struct expr **ep2);
+void expr_extract_eq(enum expr_type type, struct expr **ep, struct expr **ep1, struct expr **ep2);
+struct expr *expr_trans_compare(struct expr *e, enum expr_type type, struct symbol *sym);
+
+void expr_fprint(struct expr *e, FILE *out);
+struct gstr; /* forward */
+void expr_gstr_print(struct expr *e, struct gstr *gs);
+
+static inline int expr_is_yes(struct expr *e)
+{
+ return !e || (e->type == E_SYMBOL && e->left.sym == &symbol_yes);
+}
+
+static inline int expr_is_no(struct expr *e)
+{
+ return e && (e->type == E_SYMBOL && e->left.sym == &symbol_no);
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* EXPR_H */
diff --git a/util/kconfig/gconf.c b/util/kconfig/gconf.c
new file mode 100644
index 0000000..c703a49
--- /dev/null
+++ b/util/kconfig/gconf.c
@@ -0,0 +1,1636 @@
+/* Hey EMACS -*- linux-c -*- */
+/*
+ *
+ * Copyright (C) 2002-2003 Romain Lievin <roms@tilp.info>
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include "lkc.h"
+#include "images.c"
+
+#include <glade/glade.h>
+#include <gtk/gtk.h>
+#include <glib.h>
+#include <gdk/gdkkeysyms.h>
+
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <time.h>
+#include <stdlib.h>
+
+//#define DEBUG
+
+enum {
+ SINGLE_VIEW, SPLIT_VIEW, FULL_VIEW
+};
+
+static gint view_mode = FULL_VIEW;
+static gboolean show_name = TRUE;
+static gboolean show_range = TRUE;
+static gboolean show_value = TRUE;
+static gboolean show_all = FALSE;
+static gboolean show_debug = FALSE;
+static gboolean resizeable = FALSE;
+
+GtkWidget *main_wnd = NULL;
+GtkWidget *tree1_w = NULL; // left frame
+GtkWidget *tree2_w = NULL; // right frame
+GtkWidget *text_w = NULL;
+GtkWidget *hpaned = NULL;
+GtkWidget *vpaned = NULL;
+GtkWidget *back_btn = NULL;
+GtkWidget *save_btn = NULL;
+GtkWidget *save_menu_item = NULL;
+
+GtkTextTag *tag1, *tag2;
+GdkColor color;
+
+GtkTreeStore *tree1, *tree2, *tree;
+GtkTreeModel *model1, *model2;
+static GtkTreeIter *parents[256];
+static gint indent;
+
+static struct menu *current; // current node for SINGLE view
+static struct menu *browsed; // browsed node for SPLIT view
+
+enum {
+ COL_OPTION, COL_NAME, COL_NO, COL_MOD, COL_YES, COL_VALUE,
+ COL_MENU, COL_COLOR, COL_EDIT, COL_PIXBUF,
+ COL_PIXVIS, COL_BTNVIS, COL_BTNACT, COL_BTNINC, COL_BTNRAD,
+ COL_NUMBER
+};
+
+static void display_list(void);
+static void display_tree(struct menu *menu);
+static void display_tree_part(void);
+static void update_tree(struct menu *src, GtkTreeIter * dst);
+static void set_node(GtkTreeIter * node, struct menu *menu, gchar ** row);
+static gchar **fill_row(struct menu *menu);
+static void conf_changed(void);
+
+/* Helping/Debugging Functions */
+
+
+const char *dbg_print_stype(int val)
+{
+ static char buf[256];
+
+ bzero(buf, 256);
+
+ if (val == S_UNKNOWN)
+ strcpy(buf, "unknown");
+ if (val == S_BOOLEAN)
+ strcpy(buf, "boolean");
+ if (val == S_TRISTATE)
+ strcpy(buf, "tristate");
+ if (val == S_INT)
+ strcpy(buf, "int");
+ if (val == S_HEX)
+ strcpy(buf, "hex");
+ if (val == S_STRING)
+ strcpy(buf, "string");
+ if (val == S_OTHER)
+ strcpy(buf, "other");
+
+#ifdef DEBUG
+ printf("%s", buf);
+#endif
+
+ return buf;
+}
+
+const char *dbg_print_flags(int val)
+{
+ static char buf[256];
+
+ bzero(buf, 256);
+
+ if (val & SYMBOL_CONST)
+ strcat(buf, "const/");
+ if (val & SYMBOL_CHECK)
+ strcat(buf, "check/");
+ if (val & SYMBOL_CHOICE)
+ strcat(buf, "choice/");
+ if (val & SYMBOL_CHOICEVAL)
+ strcat(buf, "choiceval/");
+ if (val & SYMBOL_VALID)
+ strcat(buf, "valid/");
+ if (val & SYMBOL_OPTIONAL)
+ strcat(buf, "optional/");
+ if (val & SYMBOL_WRITE)
+ strcat(buf, "write/");
+ if (val & SYMBOL_CHANGED)
+ strcat(buf, "changed/");
+ if (val & SYMBOL_AUTO)
+ strcat(buf, "auto/");
+
+ buf[strlen(buf) - 1] = '\0';
+#ifdef DEBUG
+ printf("%s", buf);
+#endif
+
+ return buf;
+}
+
+const char *dbg_print_ptype(int val)
+{
+ static char buf[256];
+
+ bzero(buf, 256);
+
+ if (val == P_UNKNOWN)
+ strcpy(buf, "unknown");
+ if (val == P_PROMPT)
+ strcpy(buf, "prompt");
+ if (val == P_COMMENT)
+ strcpy(buf, "comment");
+ if (val == P_MENU)
+ strcpy(buf, "menu");
+ if (val == P_DEFAULT)
+ strcpy(buf, "default");
+ if (val == P_CHOICE)
+ strcpy(buf, "choice");
+
+#ifdef DEBUG
+ printf("%s", buf);
+#endif
+
+ return buf;
+}
+
+
+void replace_button_icon(GladeXML * xml, GdkDrawable * window,
+ GtkStyle * style, gchar * btn_name, gchar ** xpm)
+{
+ GdkPixmap *pixmap;
+ GdkBitmap *mask;
+ GtkToolButton *button;
+ GtkWidget *image;
+
+ pixmap = gdk_pixmap_create_from_xpm_d(window, &mask,
+ &style->bg[GTK_STATE_NORMAL],
+ xpm);
+
+ button = GTK_TOOL_BUTTON(glade_xml_get_widget(xml, btn_name));
+ image = gtk_image_new_from_pixmap(pixmap, mask);
+ gtk_widget_show(image);
+ gtk_tool_button_set_icon_widget(button, image);
+}
+
+/* Main Window Initialization */
+void init_main_window(const gchar * glade_file)
+{
+ GladeXML *xml;
+ GtkWidget *widget;
+ GtkTextBuffer *txtbuf;
+ char title[256];
+ GtkStyle *style;
+
+ xml = glade_xml_new(glade_file, "window1", NULL);
+ if (!xml)
+ g_error(_("GUI loading failed !\n"));
+ glade_xml_signal_autoconnect(xml);
+
+ main_wnd = glade_xml_get_widget(xml, "window1");
+ hpaned = glade_xml_get_widget(xml, "hpaned1");
+ vpaned = glade_xml_get_widget(xml, "vpaned1");
+ tree1_w = glade_xml_get_widget(xml, "treeview1");
+ tree2_w = glade_xml_get_widget(xml, "treeview2");
+ text_w = glade_xml_get_widget(xml, "textview3");
+
+ back_btn = glade_xml_get_widget(xml, "button1");
+ gtk_widget_set_sensitive(back_btn, FALSE);
+
+ widget = glade_xml_get_widget(xml, "show_name1");
+ gtk_check_menu_item_set_active((GtkCheckMenuItem *) widget,
+ show_name);
+
+ widget = glade_xml_get_widget(xml, "show_range1");
+ gtk_check_menu_item_set_active((GtkCheckMenuItem *) widget,
+ show_range);
+
+ widget = glade_xml_get_widget(xml, "show_data1");
+ gtk_check_menu_item_set_active((GtkCheckMenuItem *) widget,
+ show_value);
+
+ save_btn = glade_xml_get_widget(xml, "button3");
+ save_menu_item = glade_xml_get_widget(xml, "save1");
+ conf_set_changed_callback(conf_changed);
+
+ style = gtk_widget_get_style(main_wnd);
+ widget = glade_xml_get_widget(xml, "toolbar1");
+
+#if 0 /* Use stock Gtk icons instead */
+ replace_button_icon(xml, main_wnd->window, style,
+ "button1", (gchar **) xpm_back);
+ replace_button_icon(xml, main_wnd->window, style,
+ "button2", (gchar **) xpm_load);
+ replace_button_icon(xml, main_wnd->window, style,
+ "button3", (gchar **) xpm_save);
+#endif
+ replace_button_icon(xml, main_wnd->window, style,
+ "button4", (gchar **) xpm_single_view);
+ replace_button_icon(xml, main_wnd->window, style,
+ "button5", (gchar **) xpm_split_view);
+ replace_button_icon(xml, main_wnd->window, style,
+ "button6", (gchar **) xpm_tree_view);
+
+#if 0
+ switch (view_mode) {
+ case SINGLE_VIEW:
+ widget = glade_xml_get_widget(xml, "button4");
+ g_signal_emit_by_name(widget, "clicked");
+ break;
+ case SPLIT_VIEW:
+ widget = glade_xml_get_widget(xml, "button5");
+ g_signal_emit_by_name(widget, "clicked");
+ break;
+ case FULL_VIEW:
+ widget = glade_xml_get_widget(xml, "button6");
+ g_signal_emit_by_name(widget, "clicked");
+ break;
+ }
+#endif
+ txtbuf = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w));
+ tag1 = gtk_text_buffer_create_tag(txtbuf, "mytag1",
+ "foreground", "red",
+ "weight", PANGO_WEIGHT_BOLD,
+ NULL);
+ tag2 = gtk_text_buffer_create_tag(txtbuf, "mytag2",
+ /*"style", PANGO_STYLE_OBLIQUE, */
+ NULL);
+
+ sprintf(title, _("coreboot v%s Configuration"),
+ getenv("KERNELVERSION"));
+ gtk_window_set_title(GTK_WINDOW(main_wnd), title);
+
+ gtk_widget_show(main_wnd);
+}
+
+void init_tree_model(void)
+{
+ gint i;
+
+ tree = tree2 = gtk_tree_store_new(COL_NUMBER,
+ G_TYPE_STRING, G_TYPE_STRING,
+ G_TYPE_STRING, G_TYPE_STRING,
+ G_TYPE_STRING, G_TYPE_STRING,
+ G_TYPE_POINTER, GDK_TYPE_COLOR,
+ G_TYPE_BOOLEAN, GDK_TYPE_PIXBUF,
+ G_TYPE_BOOLEAN, G_TYPE_BOOLEAN,
+ G_TYPE_BOOLEAN, G_TYPE_BOOLEAN,
+ G_TYPE_BOOLEAN);
+ model2 = GTK_TREE_MODEL(tree2);
+
+ for (parents[0] = NULL, i = 1; i < 256; i++)
+ parents[i] = (GtkTreeIter *) g_malloc(sizeof(GtkTreeIter));
+
+ tree1 = gtk_tree_store_new(COL_NUMBER,
+ G_TYPE_STRING, G_TYPE_STRING,
+ G_TYPE_STRING, G_TYPE_STRING,
+ G_TYPE_STRING, G_TYPE_STRING,
+ G_TYPE_POINTER, GDK_TYPE_COLOR,
+ G_TYPE_BOOLEAN, GDK_TYPE_PIXBUF,
+ G_TYPE_BOOLEAN, G_TYPE_BOOLEAN,
+ G_TYPE_BOOLEAN, G_TYPE_BOOLEAN,
+ G_TYPE_BOOLEAN);
+ model1 = GTK_TREE_MODEL(tree1);
+}
+
+void init_left_tree(void)
+{
+ GtkTreeView *view = GTK_TREE_VIEW(tree1_w);
+ GtkCellRenderer *renderer;
+ GtkTreeSelection *sel;
+ GtkTreeViewColumn *column;
+
+ gtk_tree_view_set_model(view, model1);
+ gtk_tree_view_set_headers_visible(view, TRUE);
+ gtk_tree_view_set_rules_hint(view, FALSE);
+
+ column = gtk_tree_view_column_new();
+ gtk_tree_view_append_column(view, column);
+ gtk_tree_view_column_set_title(column, _("Options"));
+
+ renderer = gtk_cell_renderer_toggle_new();
+ gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column),
+ renderer, FALSE);
+ gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column),
+ renderer,
+ "active", COL_BTNACT,
+ "inconsistent", COL_BTNINC,
+ "visible", COL_BTNVIS,
+ "radio", COL_BTNRAD, NULL);
+ renderer = gtk_cell_renderer_text_new();
+ gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column),
+ renderer, FALSE);
+ gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column),
+ renderer,
+ "text", COL_OPTION,
+ "foreground-gdk",
+ COL_COLOR, NULL);
+
+ sel = gtk_tree_view_get_selection(view);
+ gtk_tree_selection_set_mode(sel, GTK_SELECTION_SINGLE);
+ gtk_widget_realize(tree1_w);
+}
+
+static void renderer_edited(GtkCellRendererText * cell,
+ const gchar * path_string,
+ const gchar * new_text, gpointer user_data);
+static void renderer_toggled(GtkCellRendererToggle * cellrenderertoggle,
+ gchar * arg1, gpointer user_data);
+
+void init_right_tree(void)
+{
+ GtkTreeView *view = GTK_TREE_VIEW(tree2_w);
+ GtkCellRenderer *renderer;
+ GtkTreeSelection *sel;
+ GtkTreeViewColumn *column;
+ gint i;
+
+ gtk_tree_view_set_model(view, model2);
+ gtk_tree_view_set_headers_visible(view, TRUE);
+ gtk_tree_view_set_rules_hint(view, FALSE);
+
+ column = gtk_tree_view_column_new();
+ gtk_tree_view_append_column(view, column);
+ gtk_tree_view_column_set_title(column, _("Options"));
+
+ renderer = gtk_cell_renderer_pixbuf_new();
+ gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column),
+ renderer, FALSE);
+ gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column),
+ renderer,
+ "pixbuf", COL_PIXBUF,
+ "visible", COL_PIXVIS, NULL);
+ renderer = gtk_cell_renderer_toggle_new();
+ gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column),
+ renderer, FALSE);
+ gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column),
+ renderer,
+ "active", COL_BTNACT,
+ "inconsistent", COL_BTNINC,
+ "visible", COL_BTNVIS,
+ "radio", COL_BTNRAD, NULL);
+ /*g_signal_connect(G_OBJECT(renderer), "toggled",
+ G_CALLBACK(renderer_toggled), NULL); */
+ renderer = gtk_cell_renderer_text_new();
+ gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column),
+ renderer, FALSE);
+ gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column),
+ renderer,
+ "text", COL_OPTION,
+ "foreground-gdk",
+ COL_COLOR, NULL);
+
+ renderer = gtk_cell_renderer_text_new();
+ gtk_tree_view_insert_column_with_attributes(view, -1,
+ _("Name"), renderer,
+ "text", COL_NAME,
+ "foreground-gdk",
+ COL_COLOR, NULL);
+ renderer = gtk_cell_renderer_text_new();
+ gtk_tree_view_insert_column_with_attributes(view, -1,
+ "N", renderer,
+ "text", COL_NO,
+ "foreground-gdk",
+ COL_COLOR, NULL);
+ renderer = gtk_cell_renderer_text_new();
+ gtk_tree_view_insert_column_with_attributes(view, -1,
+ "M", renderer,
+ "text", COL_MOD,
+ "foreground-gdk",
+ COL_COLOR, NULL);
+ renderer = gtk_cell_renderer_text_new();
+ gtk_tree_view_insert_column_with_attributes(view, -1,
+ "Y", renderer,
+ "text", COL_YES,
+ "foreground-gdk",
+ COL_COLOR, NULL);
+ renderer = gtk_cell_renderer_text_new();
+ gtk_tree_view_insert_column_with_attributes(view, -1,
+ _("Value"), renderer,
+ "text", COL_VALUE,
+ "editable",
+ COL_EDIT,
+ "foreground-gdk",
+ COL_COLOR, NULL);
+ g_signal_connect(G_OBJECT(renderer), "edited",
+ G_CALLBACK(renderer_edited), NULL);
+
+ column = gtk_tree_view_get_column(view, COL_NAME);
+ gtk_tree_view_column_set_visible(column, show_name);
+ column = gtk_tree_view_get_column(view, COL_NO);
+ gtk_tree_view_column_set_visible(column, show_range);
+ column = gtk_tree_view_get_column(view, COL_MOD);
+ gtk_tree_view_column_set_visible(column, show_range);
+ column = gtk_tree_view_get_column(view, COL_YES);
+ gtk_tree_view_column_set_visible(column, show_range);
+ column = gtk_tree_view_get_column(view, COL_VALUE);
+ gtk_tree_view_column_set_visible(column, show_value);
+
+ if (resizeable) {
+ for (i = 0; i < COL_VALUE; i++) {
+ column = gtk_tree_view_get_column(view, i);
+ gtk_tree_view_column_set_resizable(column, TRUE);
+ }
+ }
+
+ sel = gtk_tree_view_get_selection(view);
+ gtk_tree_selection_set_mode(sel, GTK_SELECTION_SINGLE);
+}
+
+
+/* Utility Functions */
+
+
+static void text_insert_help(struct menu *menu)
+{
+ GtkTextBuffer *buffer;
+ GtkTextIter start, end;
+ const char *prompt = _(menu_get_prompt(menu));
+ gchar *name;
+ const char *help;
+
+ help = menu_get_help(menu);
+
+ /* Gettextize if the help text not empty */
+ if ((help != 0) && (help[0] != 0))
+ help = _(help);
+
+ if (menu->sym && menu->sym->name)
+ name = g_strdup_printf(menu->sym->name);
+ else
+ name = g_strdup("");
+
+ buffer = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w));
+ gtk_text_buffer_get_bounds(buffer, &start, &end);
+ gtk_text_buffer_delete(buffer, &start, &end);
+ gtk_text_view_set_left_margin(GTK_TEXT_VIEW(text_w), 15);
+
+ gtk_text_buffer_get_end_iter(buffer, &end);
+ gtk_text_buffer_insert_with_tags(buffer, &end, prompt, -1, tag1,
+ NULL);
+ gtk_text_buffer_insert_at_cursor(buffer, " ", 1);
+ gtk_text_buffer_get_end_iter(buffer, &end);
+ gtk_text_buffer_insert_with_tags(buffer, &end, name, -1, tag1,
+ NULL);
+ gtk_text_buffer_insert_at_cursor(buffer, "\n\n", 2);
+ gtk_text_buffer_get_end_iter(buffer, &end);
+ gtk_text_buffer_insert_with_tags(buffer, &end, help, -1, tag2,
+ NULL);
+}
+
+
+static void text_insert_msg(const char *title, const char *message)
+{
+ GtkTextBuffer *buffer;
+ GtkTextIter start, end;
+ const char *msg = message;
+
+ buffer = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w));
+ gtk_text_buffer_get_bounds(buffer, &start, &end);
+ gtk_text_buffer_delete(buffer, &start, &end);
+ gtk_text_view_set_left_margin(GTK_TEXT_VIEW(text_w), 15);
+
+ gtk_text_buffer_get_end_iter(buffer, &end);
+ gtk_text_buffer_insert_with_tags(buffer, &end, title, -1, tag1,
+ NULL);
+ gtk_text_buffer_insert_at_cursor(buffer, "\n\n", 2);
+ gtk_text_buffer_get_end_iter(buffer, &end);
+ gtk_text_buffer_insert_with_tags(buffer, &end, msg, -1, tag2,
+ NULL);
+}
+
+
+/* Main Windows Callbacks */
+
+void on_save_activate(GtkMenuItem * menuitem, gpointer user_data);
+gboolean on_window1_delete_event(GtkWidget * widget, GdkEvent * event,
+ gpointer user_data)
+{
+ GtkWidget *dialog, *label;
+ gint result;
+
+ if (!conf_get_changed())
+ return FALSE;
+
+ dialog = gtk_dialog_new_with_buttons(_("Warning !"),
+ GTK_WINDOW(main_wnd),
+ (GtkDialogFlags)
+ (GTK_DIALOG_MODAL |
+ GTK_DIALOG_DESTROY_WITH_PARENT),
+ GTK_STOCK_OK,
+ GTK_RESPONSE_YES,
+ GTK_STOCK_NO,
+ GTK_RESPONSE_NO,
+ GTK_STOCK_CANCEL,
+ GTK_RESPONSE_CANCEL, NULL);
+ gtk_dialog_set_default_response(GTK_DIALOG(dialog),
+ GTK_RESPONSE_CANCEL);
+
+ label = gtk_label_new(_("\nSave configuration ?\n"));
+ gtk_container_add(GTK_CONTAINER(GTK_DIALOG(dialog)->vbox), label);
+ gtk_widget_show(label);
+
+ result = gtk_dialog_run(GTK_DIALOG(dialog));
+ switch (result) {
+ case GTK_RESPONSE_YES:
+ on_save_activate(NULL, NULL);
+ return FALSE;
+ case GTK_RESPONSE_NO:
+ return FALSE;
+ case GTK_RESPONSE_CANCEL:
+ case GTK_RESPONSE_DELETE_EVENT:
+ default:
+ gtk_widget_destroy(dialog);
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+
+void on_window1_destroy(GtkObject * object, gpointer user_data)
+{
+ gtk_main_quit();
+}
+
+
+void
+on_window1_size_request(GtkWidget * widget,
+ GtkRequisition * requisition, gpointer user_data)
+{
+ static gint old_h;
+ gint w, h;
+
+ if (widget->window == NULL)
+ gtk_window_get_default_size(GTK_WINDOW(main_wnd), &w, &h);
+ else
+ gdk_window_get_size(widget->window, &w, &h);
+
+ if (h == old_h)
+ return;
+ old_h = h;
+
+ gtk_paned_set_position(GTK_PANED(vpaned), 2 * h / 3);
+}
+
+
+/* Menu & Toolbar Callbacks */
+
+
+static void
+load_filename(GtkFileSelection * file_selector, gpointer user_data)
+{
+ const gchar *fn;
+
+ fn = gtk_file_selection_get_filename(GTK_FILE_SELECTION
+ (user_data));
+
+ if (conf_read(fn))
+ text_insert_msg(_("Error"), _("Unable to load configuration !"));
+ else
+ display_tree(&rootmenu);
+}
+
+void on_load1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ GtkWidget *fs;
+
+ fs = gtk_file_selection_new(_("Load file..."));
+ g_signal_connect(GTK_OBJECT(GTK_FILE_SELECTION(fs)->ok_button),
+ "clicked",
+ G_CALLBACK(load_filename), (gpointer) fs);
+ g_signal_connect_swapped(GTK_OBJECT
+ (GTK_FILE_SELECTION(fs)->ok_button),
+ "clicked", G_CALLBACK(gtk_widget_destroy),
+ (gpointer) fs);
+ g_signal_connect_swapped(GTK_OBJECT
+ (GTK_FILE_SELECTION(fs)->cancel_button),
+ "clicked", G_CALLBACK(gtk_widget_destroy),
+ (gpointer) fs);
+ gtk_widget_show(fs);
+}
+
+
+void on_save_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ if (conf_write(NULL))
+ text_insert_msg(_("Error"), _("Unable to save configuration !"));
+ if (conf_write_autoconf())
+ text_insert_msg(_("Error"), _("Unable to save configuration !"));
+}
+
+
+static void
+store_filename(GtkFileSelection * file_selector, gpointer user_data)
+{
+ const gchar *fn;
+
+ fn = gtk_file_selection_get_filename(GTK_FILE_SELECTION
+ (user_data));
+
+ if (conf_write(fn))
+ text_insert_msg(_("Error"), _("Unable to save configuration !"));
+ if (conf_write_autoconf())
+ text_insert_msg(_("Error"), _("Unable to save configuration !"));
+
+ gtk_widget_destroy(GTK_WIDGET(user_data));
+}
+
+void on_save_as1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ GtkWidget *fs;
+
+ fs = gtk_file_selection_new(_("Save file as..."));
+ g_signal_connect(GTK_OBJECT(GTK_FILE_SELECTION(fs)->ok_button),
+ "clicked",
+ G_CALLBACK(store_filename), (gpointer) fs);
+ g_signal_connect_swapped(GTK_OBJECT
+ (GTK_FILE_SELECTION(fs)->ok_button),
+ "clicked", G_CALLBACK(gtk_widget_destroy),
+ (gpointer) fs);
+ g_signal_connect_swapped(GTK_OBJECT
+ (GTK_FILE_SELECTION(fs)->cancel_button),
+ "clicked", G_CALLBACK(gtk_widget_destroy),
+ (gpointer) fs);
+ gtk_widget_show(fs);
+}
+
+
+void on_quit1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ if (!on_window1_delete_event(NULL, NULL, NULL))
+ gtk_widget_destroy(GTK_WIDGET(main_wnd));
+}
+
+
+void on_show_name1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ GtkTreeViewColumn *col;
+
+ show_name = GTK_CHECK_MENU_ITEM(menuitem)->active;
+ col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_NAME);
+ if (col)
+ gtk_tree_view_column_set_visible(col, show_name);
+}
+
+
+void on_show_range1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ GtkTreeViewColumn *col;
+
+ show_range = GTK_CHECK_MENU_ITEM(menuitem)->active;
+ col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_NO);
+ if (col)
+ gtk_tree_view_column_set_visible(col, show_range);
+ col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_MOD);
+ if (col)
+ gtk_tree_view_column_set_visible(col, show_range);
+ col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_YES);
+ if (col)
+ gtk_tree_view_column_set_visible(col, show_range);
+
+}
+
+
+void on_show_data1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ GtkTreeViewColumn *col;
+
+ show_value = GTK_CHECK_MENU_ITEM(menuitem)->active;
+ col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_VALUE);
+ if (col)
+ gtk_tree_view_column_set_visible(col, show_value);
+}
+
+
+void
+on_show_all_options1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ show_all = GTK_CHECK_MENU_ITEM(menuitem)->active;
+
+ gtk_tree_store_clear(tree2);
+ display_tree(&rootmenu); // instead of update_tree to speed-up
+}
+
+
+void
+on_show_debug_info1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ show_debug = GTK_CHECK_MENU_ITEM(menuitem)->active;
+ update_tree(&rootmenu, NULL);
+}
+
+
+void on_introduction1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ GtkWidget *dialog;
+ const gchar *intro_text = _(
+ "Welcome to gkc, the GTK+ graphical configuration tool\n"
+ "for coreboot.\n"
+ "For each option, a blank box indicates the feature is disabled, a\n"
+ "check indicates it is enabled, and a dot indicates that it is to\n"
+ "be compiled as a module. Clicking on the box will cycle through the three states.\n"
+ "\n"
+ "If you do not see an option (e.g., a device driver) that you\n"
+ "believe should be present, try turning on Show All Options\n"
+ "under the Options menu.\n"
+ "Although there is no cross reference yet to help you figure out\n"
+ "what other options must be enabled to support the option you\n"
+ "are interested in, you can still view the help of a grayed-out\n"
+ "option.\n"
+ "\n"
+ "Toggling Show Debug Info under the Options menu will show \n"
+ "the dependencies, which you can then match by examining other options.");
+
+ dialog = gtk_message_dialog_new(GTK_WINDOW(main_wnd),
+ GTK_DIALOG_DESTROY_WITH_PARENT,
+ GTK_MESSAGE_INFO,
+ GTK_BUTTONS_CLOSE, intro_text);
+ g_signal_connect_swapped(GTK_OBJECT(dialog), "response",
+ G_CALLBACK(gtk_widget_destroy),
+ GTK_OBJECT(dialog));
+ gtk_widget_show_all(dialog);
+}
+
+
+void on_about1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ GtkWidget *dialog;
+ const gchar *about_text =
+ _("gkc is copyright (c) 2002 Romain Lievin <roms@lpg.ticalc.org>.\n"
+ "Based on the source code from Roman Zippel.\n");
+
+ dialog = gtk_message_dialog_new(GTK_WINDOW(main_wnd),
+ GTK_DIALOG_DESTROY_WITH_PARENT,
+ GTK_MESSAGE_INFO,
+ GTK_BUTTONS_CLOSE, about_text);
+ g_signal_connect_swapped(GTK_OBJECT(dialog), "response",
+ G_CALLBACK(gtk_widget_destroy),
+ GTK_OBJECT(dialog));
+ gtk_widget_show_all(dialog);
+}
+
+
+void on_license1_activate(GtkMenuItem * menuitem, gpointer user_data)
+{
+ GtkWidget *dialog;
+ const gchar *license_text =
+ _("gkc is released under the terms of the GNU GPL v2.\n"
+ "For more information, please see the source code or\n"
+ "visit http://www.fsf.org/licenses/licenses.html\n");
+
+ dialog = gtk_message_dialog_new(GTK_WINDOW(main_wnd),
+ GTK_DIALOG_DESTROY_WITH_PARENT,
+ GTK_MESSAGE_INFO,
+ GTK_BUTTONS_CLOSE, license_text);
+ g_signal_connect_swapped(GTK_OBJECT(dialog), "response",
+ G_CALLBACK(gtk_widget_destroy),
+ GTK_OBJECT(dialog));
+ gtk_widget_show_all(dialog);
+}
+
+
+void on_back_clicked(GtkButton * button, gpointer user_data)
+{
+ enum prop_type ptype;
+
+ current = current->parent;
+ ptype = current->prompt ? current->prompt->type : P_UNKNOWN;
+ if (ptype != P_MENU)
+ current = current->parent;
+ display_tree_part();
+
+ if (current == &rootmenu)
+ gtk_widget_set_sensitive(back_btn, FALSE);
+}
+
+
+void on_load_clicked(GtkButton * button, gpointer user_data)
+{
+ on_load1_activate(NULL, user_data);
+}
+
+
+void on_single_clicked(GtkButton * button, gpointer user_data)
+{
+ view_mode = SINGLE_VIEW;
+ gtk_paned_set_position(GTK_PANED(hpaned), 0);
+ gtk_widget_hide(tree1_w);
+ current = &rootmenu;
+ display_tree_part();
+}
+
+
+void on_split_clicked(GtkButton * button, gpointer user_data)
+{
+ gint w, h;
+ view_mode = SPLIT_VIEW;
+ gtk_widget_show(tree1_w);
+ gtk_window_get_default_size(GTK_WINDOW(main_wnd), &w, &h);
+ gtk_paned_set_position(GTK_PANED(hpaned), w / 2);
+ if (tree2)
+ gtk_tree_store_clear(tree2);
+ display_list();
+
+ /* Disable back btn, like in full mode. */
+ gtk_widget_set_sensitive(back_btn, FALSE);
+}
+
+
+void on_full_clicked(GtkButton * button, gpointer user_data)
+{
+ view_mode = FULL_VIEW;
+ gtk_paned_set_position(GTK_PANED(hpaned), 0);
+ gtk_widget_hide(tree1_w);
+ if (tree2)
+ gtk_tree_store_clear(tree2);
+ display_tree(&rootmenu);
+ gtk_widget_set_sensitive(back_btn, FALSE);
+}
+
+
+void on_collapse_clicked(GtkButton * button, gpointer user_data)
+{
+ gtk_tree_view_collapse_all(GTK_TREE_VIEW(tree2_w));
+}
+
+
+void on_expand_clicked(GtkButton * button, gpointer user_data)
+{
+ gtk_tree_view_expand_all(GTK_TREE_VIEW(tree2_w));
+}
+
+
+/* CTree Callbacks */
+
+/* Change hex/int/string value in the cell */
+static void renderer_edited(GtkCellRendererText * cell,
+ const gchar * path_string,
+ const gchar * new_text, gpointer user_data)
+{
+ GtkTreePath *path = gtk_tree_path_new_from_string(path_string);
+ GtkTreeIter iter;
+ const char *old_def, *new_def;
+ struct menu *menu;
+ struct symbol *sym;
+
+ if (!gtk_tree_model_get_iter(model2, &iter, path))
+ return;
+
+ gtk_tree_model_get(model2, &iter, COL_MENU, &menu, -1);
+ sym = menu->sym;
+
+ gtk_tree_model_get(model2, &iter, COL_VALUE, &old_def, -1);
+ new_def = new_text;
+
+ sym_set_string_value(sym, new_def);
+
+ update_tree(&rootmenu, NULL);
+
+ gtk_tree_path_free(path);
+}
+
+/* Change the value of a symbol and update the tree */
+static void change_sym_value(struct menu *menu, gint col)
+{
+ struct symbol *sym = menu->sym;
+ tristate oldval, newval;
+
+ if (!sym)
+ return;
+
+ if (col == COL_NO)
+ newval = no;
+ else if (col == COL_MOD)
+ newval = mod;
+ else if (col == COL_YES)
+ newval = yes;
+ else
+ return;
+
+ switch (sym_get_type(sym)) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ oldval = sym_get_tristate_value(sym);
+ if (!sym_tristate_within_range(sym, newval))
+ newval = yes;
+ sym_set_tristate_value(sym, newval);
+ if (view_mode == FULL_VIEW)
+ update_tree(&rootmenu, NULL);
+ else if (view_mode == SPLIT_VIEW) {
+ update_tree(browsed, NULL);
+ display_list();
+ }
+ else if (view_mode == SINGLE_VIEW)
+ display_tree_part(); //fixme: keep exp/coll
+ break;
+ case S_INT:
+ case S_HEX:
+ case S_STRING:
+ default:
+ break;
+ }
+}
+
+static void toggle_sym_value(struct menu *menu)
+{
+ if (!menu->sym)
+ return;
+
+ sym_toggle_tristate_value(menu->sym);
+ if (view_mode == FULL_VIEW)
+ update_tree(&rootmenu, NULL);
+ else if (view_mode == SPLIT_VIEW) {
+ update_tree(browsed, NULL);
+ display_list();
+ }
+ else if (view_mode == SINGLE_VIEW)
+ display_tree_part(); //fixme: keep exp/coll
+}
+
+static void renderer_toggled(GtkCellRendererToggle * cell,
+ gchar * path_string, gpointer user_data)
+{
+ GtkTreePath *path, *sel_path = NULL;
+ GtkTreeIter iter, sel_iter;
+ GtkTreeSelection *sel;
+ struct menu *menu;
+
+ path = gtk_tree_path_new_from_string(path_string);
+ if (!gtk_tree_model_get_iter(model2, &iter, path))
+ return;
+
+ sel = gtk_tree_view_get_selection(GTK_TREE_VIEW(tree2_w));
+ if (gtk_tree_selection_get_selected(sel, NULL, &sel_iter))
+ sel_path = gtk_tree_model_get_path(model2, &sel_iter);
+ if (!sel_path)
+ goto out1;
+ if (gtk_tree_path_compare(path, sel_path))
+ goto out2;
+
+ gtk_tree_model_get(model2, &iter, COL_MENU, &menu, -1);
+ toggle_sym_value(menu);
+
+ out2:
+ gtk_tree_path_free(sel_path);
+ out1:
+ gtk_tree_path_free(path);
+}
+
+static gint column2index(GtkTreeViewColumn * column)
+{
+ gint i;
+
+ for (i = 0; i < COL_NUMBER; i++) {
+ GtkTreeViewColumn *col;
+
+ col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), i);
+ if (col == column)
+ return i;
+ }
+
+ return -1;
+}
+
+
+/* User click: update choice (full) or goes down (single) */
+gboolean
+on_treeview2_button_press_event(GtkWidget * widget,
+ GdkEventButton * event, gpointer user_data)
+{
+ GtkTreeView *view = GTK_TREE_VIEW(widget);
+ GtkTreePath *path;
+ GtkTreeViewColumn *column;
+ GtkTreeIter iter;
+ struct menu *menu;
+ gint col;
+
+#if GTK_CHECK_VERSION(2,1,4) // bug in ctree with earlier version of GTK
+ gint tx = (gint) event->x;
+ gint ty = (gint) event->y;
+ gint cx, cy;
+
+ gtk_tree_view_get_path_at_pos(view, tx, ty, &path, &column, &cx,
+ &cy);
+#else
+ gtk_tree_view_get_cursor(view, &path, &column);
+#endif
+ if (path == NULL)
+ return FALSE;
+
+ if (!gtk_tree_model_get_iter(model2, &iter, path))
+ return FALSE;
+ gtk_tree_model_get(model2, &iter, COL_MENU, &menu, -1);
+
+ col = column2index(column);
+ if (event->type == GDK_2BUTTON_PRESS) {
+ enum prop_type ptype;
+ ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN;
+
+ if (ptype == P_MENU && view_mode != FULL_VIEW && col == COL_OPTION) {
+ // goes down into menu
+ current = menu;
+ display_tree_part();
+ gtk_widget_set_sensitive(back_btn, TRUE);
+ } else if ((col == COL_OPTION)) {
+ toggle_sym_value(menu);
+ gtk_tree_view_expand_row(view, path, TRUE);
+ }
+ } else {
+ if (col == COL_VALUE) {
+ toggle_sym_value(menu);
+ gtk_tree_view_expand_row(view, path, TRUE);
+ } else if (col == COL_NO || col == COL_MOD
+ || col == COL_YES) {
+ change_sym_value(menu, col);
+ gtk_tree_view_expand_row(view, path, TRUE);
+ }
+ }
+
+ return FALSE;
+}
+
+/* Key pressed: update choice */
+gboolean
+on_treeview2_key_press_event(GtkWidget * widget,
+ GdkEventKey * event, gpointer user_data)
+{
+ GtkTreeView *view = GTK_TREE_VIEW(widget);
+ GtkTreePath *path;
+ GtkTreeViewColumn *column;
+ GtkTreeIter iter;
+ struct menu *menu;
+ gint col;
+
+ gtk_tree_view_get_cursor(view, &path, &column);
+ if (path == NULL)
+ return FALSE;
+
+ if (event->keyval == GDK_space) {
+ if (gtk_tree_view_row_expanded(view, path))
+ gtk_tree_view_collapse_row(view, path);
+ else
+ gtk_tree_view_expand_row(view, path, FALSE);
+ return TRUE;
+ }
+ if (event->keyval == GDK_KP_Enter) {
+ }
+ if (widget == tree1_w)
+ return FALSE;
+
+ gtk_tree_model_get_iter(model2, &iter, path);
+ gtk_tree_model_get(model2, &iter, COL_MENU, &menu, -1);
+
+ if (!strcasecmp(event->string, "n"))
+ col = COL_NO;
+ else if (!strcasecmp(event->string, "m"))
+ col = COL_MOD;
+ else if (!strcasecmp(event->string, "y"))
+ col = COL_YES;
+ else
+ col = -1;
+ change_sym_value(menu, col);
+
+ return FALSE;
+}
+
+
+/* Row selection changed: update help */
+void
+on_treeview2_cursor_changed(GtkTreeView * treeview, gpointer user_data)
+{
+ GtkTreeSelection *selection;
+ GtkTreeIter iter;
+ struct menu *menu;
+
+ selection = gtk_tree_view_get_selection(treeview);
+ if (gtk_tree_selection_get_selected(selection, &model2, &iter)) {
+ gtk_tree_model_get(model2, &iter, COL_MENU, &menu, -1);
+ text_insert_help(menu);
+ }
+}
+
+
+/* User click: display sub-tree in the right frame. */
+gboolean
+on_treeview1_button_press_event(GtkWidget * widget,
+ GdkEventButton * event, gpointer user_data)
+{
+ GtkTreeView *view = GTK_TREE_VIEW(widget);
+ GtkTreePath *path;
+ GtkTreeViewColumn *column;
+ GtkTreeIter iter;
+ struct menu *menu;
+
+ gint tx = (gint) event->x;
+ gint ty = (gint) event->y;
+ gint cx, cy;
+
+ gtk_tree_view_get_path_at_pos(view, tx, ty, &path, &column, &cx,
+ &cy);
+ if (path == NULL)
+ return FALSE;
+
+ gtk_tree_model_get_iter(model1, &iter, path);
+ gtk_tree_model_get(model1, &iter, COL_MENU, &menu, -1);
+
+ if (event->type == GDK_2BUTTON_PRESS) {
+ toggle_sym_value(menu);
+ current = menu;
+ display_tree_part();
+ } else {
+ browsed = menu;
+ display_tree_part();
+ }
+
+ gtk_widget_realize(tree2_w);
+ gtk_tree_view_set_cursor(view, path, NULL, FALSE);
+ gtk_widget_grab_focus(tree2_w);
+
+ return FALSE;
+}
+
+
+/* Fill a row of strings */
+static gchar **fill_row(struct menu *menu)
+{
+ static gchar *row[COL_NUMBER];
+ struct symbol *sym = menu->sym;
+ const char *def;
+ int stype;
+ tristate val;
+ enum prop_type ptype;
+ int i;
+
+ for (i = COL_OPTION; i <= COL_COLOR; i++)
+ g_free(row[i]);
+ bzero(row, sizeof(row));
+
+ row[COL_OPTION] =
+ g_strdup_printf("%s %s", _(menu_get_prompt(menu)),
+ sym && sym_has_value(sym) ? "(NEW)" : "");
+
+ if (show_all && !menu_is_visible(menu))
+ row[COL_COLOR] = g_strdup("DarkGray");
+ else
+ row[COL_COLOR] = g_strdup("Black");
+
+ ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN;
+ switch (ptype) {
+ case P_MENU:
+ row[COL_PIXBUF] = (gchar *) xpm_menu;
+ if (view_mode == SINGLE_VIEW)
+ row[COL_PIXVIS] = GINT_TO_POINTER(TRUE);
+ row[COL_BTNVIS] = GINT_TO_POINTER(FALSE);
+ break;
+ case P_COMMENT:
+ row[COL_PIXBUF] = (gchar *) xpm_void;
+ row[COL_PIXVIS] = GINT_TO_POINTER(FALSE);
+ row[COL_BTNVIS] = GINT_TO_POINTER(FALSE);
+ break;
+ default:
+ row[COL_PIXBUF] = (gchar *) xpm_void;
+ row[COL_PIXVIS] = GINT_TO_POINTER(FALSE);
+ row[COL_BTNVIS] = GINT_TO_POINTER(TRUE);
+ break;
+ }
+
+ if (!sym)
+ return row;
+ row[COL_NAME] = g_strdup(sym->name);
+
+ sym_calc_value(sym);
+ sym->flags &= ~SYMBOL_CHANGED;
+
+ if (sym_is_choice(sym)) { // parse childs for getting final value
+ struct menu *child;
+ struct symbol *def_sym = sym_get_choice_value(sym);
+ struct menu *def_menu = NULL;
+
+ row[COL_BTNVIS] = GINT_TO_POINTER(FALSE);
+
+ for (child = menu->list; child; child = child->next) {
+ if (menu_is_visible(child)
+ && child->sym == def_sym)
+ def_menu = child;
+ }
+
+ if (def_menu)
+ row[COL_VALUE] =
+ g_strdup(_(menu_get_prompt(def_menu)));
+ }
+ if (sym->flags & SYMBOL_CHOICEVAL)
+ row[COL_BTNRAD] = GINT_TO_POINTER(TRUE);
+
+ stype = sym_get_type(sym);
+ switch (stype) {
+ case S_BOOLEAN:
+ if (GPOINTER_TO_INT(row[COL_PIXVIS]) == FALSE)
+ row[COL_BTNVIS] = GINT_TO_POINTER(TRUE);
+ if (sym_is_choice(sym))
+ break;
+ case S_TRISTATE:
+ val = sym_get_tristate_value(sym);
+ switch (val) {
+ case no:
+ row[COL_NO] = g_strdup("N");
+ row[COL_VALUE] = g_strdup("N");
+ row[COL_BTNACT] = GINT_TO_POINTER(FALSE);
+ row[COL_BTNINC] = GINT_TO_POINTER(FALSE);
+ break;
+ case mod:
+ row[COL_MOD] = g_strdup("M");
+ row[COL_VALUE] = g_strdup("M");
+ row[COL_BTNINC] = GINT_TO_POINTER(TRUE);
+ break;
+ case yes:
+ row[COL_YES] = g_strdup("Y");
+ row[COL_VALUE] = g_strdup("Y");
+ row[COL_BTNACT] = GINT_TO_POINTER(TRUE);
+ row[COL_BTNINC] = GINT_TO_POINTER(FALSE);
+ break;
+ }
+
+ if (val != no && sym_tristate_within_range(sym, no))
+ row[COL_NO] = g_strdup("_");
+ if (val != mod && sym_tristate_within_range(sym, mod))
+ row[COL_MOD] = g_strdup("_");
+ if (val != yes && sym_tristate_within_range(sym, yes))
+ row[COL_YES] = g_strdup("_");
+ break;
+ case S_INT:
+ case S_HEX:
+ case S_STRING:
+ def = sym_get_string_value(sym);
+ row[COL_VALUE] = g_strdup(def);
+ row[COL_EDIT] = GINT_TO_POINTER(TRUE);
+ row[COL_BTNVIS] = GINT_TO_POINTER(FALSE);
+ break;
+ }
+
+ return row;
+}
+
+
+/* Set the node content with a row of strings */
+static void set_node(GtkTreeIter * node, struct menu *menu, gchar ** row)
+{
+ GdkColor color;
+ gboolean success;
+ GdkPixbuf *pix;
+
+ pix = gdk_pixbuf_new_from_xpm_data((const char **)
+ row[COL_PIXBUF]);
+
+ gdk_color_parse(row[COL_COLOR], &color);
+ gdk_colormap_alloc_colors(gdk_colormap_get_system(), &color, 1,
+ FALSE, FALSE, &success);
+
+ gtk_tree_store_set(tree, node,
+ COL_OPTION, row[COL_OPTION],
+ COL_NAME, row[COL_NAME],
+ COL_NO, row[COL_NO],
+ COL_MOD, row[COL_MOD],
+ COL_YES, row[COL_YES],
+ COL_VALUE, row[COL_VALUE],
+ COL_MENU, (gpointer) menu,
+ COL_COLOR, &color,
+ COL_EDIT, GPOINTER_TO_INT(row[COL_EDIT]),
+ COL_PIXBUF, pix,
+ COL_PIXVIS, GPOINTER_TO_INT(row[COL_PIXVIS]),
+ COL_BTNVIS, GPOINTER_TO_INT(row[COL_BTNVIS]),
+ COL_BTNACT, GPOINTER_TO_INT(row[COL_BTNACT]),
+ COL_BTNINC, GPOINTER_TO_INT(row[COL_BTNINC]),
+ COL_BTNRAD, GPOINTER_TO_INT(row[COL_BTNRAD]),
+ -1);
+
+ g_object_unref(pix);
+}
+
+
+/* Add a node to the tree */
+static void place_node(struct menu *menu, char **row)
+{
+ GtkTreeIter *parent = parents[indent - 1];
+ GtkTreeIter *node = parents[indent];
+
+ gtk_tree_store_append(tree, node, parent);
+ set_node(node, menu, row);
+}
+
+
+/* Find a node in the GTK+ tree */
+static GtkTreeIter found;
+
+/*
+ * Find a menu in the GtkTree starting at parent.
+ */
+GtkTreeIter *gtktree_iter_find_node(GtkTreeIter * parent,
+ struct menu *tofind)
+{
+ GtkTreeIter iter;
+ GtkTreeIter *child = &iter;
+ gboolean valid;
+ GtkTreeIter *ret;
+
+ valid = gtk_tree_model_iter_children(model2, child, parent);
+ while (valid) {
+ struct menu *menu;
+
+ gtk_tree_model_get(model2, child, 6, &menu, -1);
+
+ if (menu == tofind) {
+ memcpy(&found, child, sizeof(GtkTreeIter));
+ return &found;
+ }
+
+ ret = gtktree_iter_find_node(child, tofind);
+ if (ret)
+ return ret;
+
+ valid = gtk_tree_model_iter_next(model2, child);
+ }
+
+ return NULL;
+}
+
+
+/*
+ * Update the tree by adding/removing entries
+ * Does not change other nodes
+ */
+static void update_tree(struct menu *src, GtkTreeIter * dst)
+{
+ struct menu *child1;
+ GtkTreeIter iter, tmp;
+ GtkTreeIter *child2 = &iter;
+ gboolean valid;
+ GtkTreeIter *sibling;
+ struct symbol *sym;
+ struct property *prop;
+ struct menu *menu1, *menu2;
+
+ if (src == &rootmenu)
+ indent = 1;
+
+ valid = gtk_tree_model_iter_children(model2, child2, dst);
+ for (child1 = src->list; child1; child1 = child1->next) {
+
+ prop = child1->prompt;
+ sym = child1->sym;
+
+ reparse:
+ menu1 = child1;
+ if (valid)
+ gtk_tree_model_get(model2, child2, COL_MENU,
+ &menu2, -1);
+ else
+ menu2 = NULL; // force adding of a first child
+
+#ifdef DEBUG
+ printf("%*c%s | %s\n", indent, ' ',
+ menu1 ? menu_get_prompt(menu1) : "nil",
+ menu2 ? menu_get_prompt(menu2) : "nil");
+#endif
+
+ if (!menu_is_visible(child1) && !show_all) { // remove node
+ if (gtktree_iter_find_node(dst, menu1) != NULL) {
+ memcpy(&tmp, child2, sizeof(GtkTreeIter));
+ valid = gtk_tree_model_iter_next(model2,
+ child2);
+ gtk_tree_store_remove(tree2, &tmp);
+ if (!valid)
+ return; // next parent
+ else
+ goto reparse; // next child
+ } else
+ continue;
+ }
+
+ if (menu1 != menu2) {
+ if (gtktree_iter_find_node(dst, menu1) == NULL) { // add node
+ if (!valid && !menu2)
+ sibling = NULL;
+ else
+ sibling = child2;
+ gtk_tree_store_insert_before(tree2,
+ child2,
+ dst, sibling);
+ set_node(child2, menu1, fill_row(menu1));
+ if (menu2 == NULL)
+ valid = TRUE;
+ } else { // remove node
+ memcpy(&tmp, child2, sizeof(GtkTreeIter));
+ valid = gtk_tree_model_iter_next(model2,
+ child2);
+ gtk_tree_store_remove(tree2, &tmp);
+ if (!valid)
+ return; // next parent
+ else
+ goto reparse; // next child
+ }
+ } else if (sym && (sym->flags & SYMBOL_CHANGED)) {
+ set_node(child2, menu1, fill_row(menu1));
+ }
+
+ indent++;
+ update_tree(child1, child2);
+ indent--;
+
+ valid = gtk_tree_model_iter_next(model2, child2);
+ }
+}
+
+
+/* Display the whole tree (single/split/full view) */
+static void display_tree(struct menu *menu)
+{
+ struct symbol *sym;
+ struct property *prop;
+ struct menu *child;
+ enum prop_type ptype;
+
+ if (menu == &rootmenu) {
+ indent = 1;
+ current = &rootmenu;
+ }
+
+ for (child = menu->list; child; child = child->next) {
+ prop = child->prompt;
+ sym = child->sym;
+ ptype = prop ? prop->type : P_UNKNOWN;
+
+ if (sym)
+ sym->flags &= ~SYMBOL_CHANGED;
+
+ if ((view_mode == SPLIT_VIEW)
+ && !(child->flags & MENU_ROOT) && (tree == tree1))
+ continue;
+
+ if ((view_mode == SPLIT_VIEW) && (child->flags & MENU_ROOT)
+ && (tree == tree2))
+ continue;
+
+ if (menu_is_visible(child) || show_all)
+ place_node(child, fill_row(child));
+#ifdef DEBUG
+ printf("%*c%s: ", indent, ' ', menu_get_prompt(child));
+ printf("%s", child->flags & MENU_ROOT ? "rootmenu | " : "");
+ dbg_print_ptype(ptype);
+ printf(" | ");
+ if (sym) {
+ dbg_print_stype(sym->type);
+ printf(" | ");
+ dbg_print_flags(sym->flags);
+ printf("\n");
+ } else
+ printf("\n");
+#endif
+ if ((view_mode != FULL_VIEW) && (ptype == P_MENU)
+ && (tree == tree2))
+ continue;
+/*
+ if (((menu != &rootmenu) && !(menu->flags & MENU_ROOT))
+ || (view_mode == FULL_VIEW)
+ || (view_mode == SPLIT_VIEW))*/
+ if (((view_mode == SINGLE_VIEW) && (menu->flags & MENU_ROOT))
+ || (view_mode == FULL_VIEW)
+ || (view_mode == SPLIT_VIEW)) {
+ indent++;
+ display_tree(child);
+ indent--;
+ }
+ }
+}
+
+/* Display a part of the tree starting at current node (single/split view) */
+static void display_tree_part(void)
+{
+ if (tree2)
+ gtk_tree_store_clear(tree2);
+ if (view_mode == SINGLE_VIEW)
+ display_tree(current);
+ else if (view_mode == SPLIT_VIEW)
+ display_tree(browsed);
+ gtk_tree_view_expand_all(GTK_TREE_VIEW(tree2_w));
+}
+
+/* Display the list in the left frame (split view) */
+static void display_list(void)
+{
+ if (tree1)
+ gtk_tree_store_clear(tree1);
+
+ tree = tree1;
+ display_tree(&rootmenu);
+ gtk_tree_view_expand_all(GTK_TREE_VIEW(tree1_w));
+ tree = tree2;
+}
+
+void fixup_rootmenu(struct menu *menu)
+{
+ struct menu *child;
+ static int menu_cnt = 0;
+
+ menu->flags |= MENU_ROOT;
+ for (child = menu->list; child; child = child->next) {
+ if (child->prompt && child->prompt->type == P_MENU) {
+ menu_cnt++;
+ fixup_rootmenu(child);
+ menu_cnt--;
+ } else if (!menu_cnt)
+ fixup_rootmenu(child);
+ }
+}
+
+
+/* Main */
+int main(int ac, char *av[])
+{
+ const char *name;
+ char *env;
+ gchar *glade_file;
+
+#ifndef LKC_DIRECT_LINK
+ kconfig_load();
+#endif
+
+ bindtextdomain(PACKAGE, LOCALEDIR);
+ bind_textdomain_codeset(PACKAGE, "UTF-8");
+ textdomain(PACKAGE);
+
+ /* GTK stuffs */
+ gtk_set_locale();
+ gtk_init(&ac, &av);
+ glade_init();
+
+ //add_pixmap_directory (PACKAGE_DATA_DIR "/" PACKAGE "/pixmaps");
+ //add_pixmap_directory (PACKAGE_SOURCE_DIR "/pixmaps");
+
+ /* Determine GUI path */
+ env = getenv(SRCTREE);
+ if (env)
+ glade_file = g_strconcat(env, "/util/kconfig/gconf.glade", NULL);
+ else if (av[0][0] == '/')
+ glade_file = g_strconcat(av[0], ".glade", NULL);
+ else
+ glade_file = g_strconcat(g_get_current_dir(), "/", av[0], ".glade", NULL);
+
+ /* Load the interface and connect signals */
+ init_main_window(glade_file);
+ init_tree_model();
+ init_left_tree();
+ init_right_tree();
+
+ /* Conf stuffs */
+ if (ac > 1 && av[1][0] == '-') {
+ switch (av[1][1]) {
+ case 'a':
+ //showAll = 1;
+ break;
+ case 'h':
+ case '?':
+ printf("%s <config>\n", av[0]);
+ exit(0);
+ }
+ name = av[2];
+ } else
+ name = av[1];
+
+ conf_parse(name);
+ fixup_rootmenu(&rootmenu);
+ conf_read(NULL);
+
+ switch (view_mode) {
+ case SINGLE_VIEW:
+ display_tree_part();
+ break;
+ case SPLIT_VIEW:
+ display_list();
+ break;
+ case FULL_VIEW:
+ display_tree(&rootmenu);
+ break;
+ }
+
+ gtk_main();
+
+ return 0;
+}
+
+static void conf_changed(void)
+{
+ bool changed = conf_get_changed();
+ gtk_widget_set_sensitive(save_btn, changed);
+ gtk_widget_set_sensitive(save_menu_item, changed);
+}
diff --git a/util/kconfig/gconf.glade b/util/kconfig/gconf.glade
new file mode 100644
index 0000000..328bdc7
--- /dev/null
+++ b/util/kconfig/gconf.glade
@@ -0,0 +1,648 @@
+<?xml version="1.0" standalone="no"?> <!--*- mode: xml -*-->
+<!DOCTYPE glade-interface SYSTEM "http://glade.gnome.org/glade-2.0.dtd">
+
+<glade-interface>
+
+<widget class="GtkWindow" id="window1">
+ <property name="visible">True</property>
+ <property name="title" translatable="yes">Gtk coreboot Configurator</property>
+ <property name="type">GTK_WINDOW_TOPLEVEL</property>
+ <property name="window_position">GTK_WIN_POS_NONE</property>
+ <property name="modal">False</property>
+ <property name="default_width">640</property>
+ <property name="default_height">480</property>
+ <property name="resizable">True</property>
+ <property name="destroy_with_parent">False</property>
+ <property name="decorated">True</property>
+ <property name="skip_taskbar_hint">False</property>
+ <property name="skip_pager_hint">False</property>
+ <property name="type_hint">GDK_WINDOW_TYPE_HINT_NORMAL</property>
+ <property name="gravity">GDK_GRAVITY_NORTH_WEST</property>
+ <signal name="destroy" handler="on_window1_destroy" object="window1"/>
+ <signal name="size_request" handler="on_window1_size_request" object="vpaned1" last_modification_time="Fri, 11 Jan 2002 16:17:11 GMT"/>
+ <signal name="delete_event" handler="on_window1_delete_event" object="window1" last_modification_time="Sun, 09 Mar 2003 19:42:46 GMT"/>
+
+ <child>
+ <widget class="GtkVBox" id="vbox1">
+ <property name="visible">True</property>
+ <property name="homogeneous">False</property>
+ <property name="spacing">0</property>
+
+ <child>
+ <widget class="GtkMenuBar" id="menubar1">
+ <property name="visible">True</property>
+
+ <child>
+ <widget class="GtkMenuItem" id="file1">
+ <property name="visible">True</property>
+ <property name="label" translatable="yes">_File</property>
+ <property name="use_underline">True</property>
+
+ <child>
+ <widget class="GtkMenu" id="file1_menu">
+
+ <child>
+ <widget class="GtkImageMenuItem" id="load1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Load a config file</property>
+ <property name="label" translatable="yes">_Load</property>
+ <property name="use_underline">True</property>
+ <signal name="activate" handler="on_load1_activate"/>
+ <accelerator key="L" modifiers="GDK_CONTROL_MASK" signal="activate"/>
+
+ <child internal-child="image">
+ <widget class="GtkImage" id="image39">
+ <property name="visible">True</property>
+ <property name="stock">gtk-open</property>
+ <property name="icon_size">1</property>
+ <property name="xalign">0.5</property>
+ <property name="yalign">0.5</property>
+ <property name="xpad">0</property>
+ <property name="ypad">0</property>
+ </widget>
+ </child>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkImageMenuItem" id="save1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Save the config in .config</property>
+ <property name="label" translatable="yes">_Save</property>
+ <property name="use_underline">True</property>
+ <signal name="activate" handler="on_save_activate"/>
+ <accelerator key="S" modifiers="GDK_CONTROL_MASK" signal="activate"/>
+
+ <child internal-child="image">
+ <widget class="GtkImage" id="image40">
+ <property name="visible">True</property>
+ <property name="stock">gtk-save</property>
+ <property name="icon_size">1</property>
+ <property name="xalign">0.5</property>
+ <property name="yalign">0.5</property>
+ <property name="xpad">0</property>
+ <property name="ypad">0</property>
+ </widget>
+ </child>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkImageMenuItem" id="save_as1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Save the config in a file</property>
+ <property name="label" translatable="yes">Save _as</property>
+ <property name="use_underline">True</property>
+ <signal name="activate" handler="on_save_as1_activate"/>
+
+ <child internal-child="image">
+ <widget class="GtkImage" id="image41">
+ <property name="visible">True</property>
+ <property name="stock">gtk-save-as</property>
+ <property name="icon_size">1</property>
+ <property name="xalign">0.5</property>
+ <property name="yalign">0.5</property>
+ <property name="xpad">0</property>
+ <property name="ypad">0</property>
+ </widget>
+ </child>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkSeparatorMenuItem" id="separator1">
+ <property name="visible">True</property>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkImageMenuItem" id="quit1">
+ <property name="visible">True</property>
+ <property name="label" translatable="yes">_Quit</property>
+ <property name="use_underline">True</property>
+ <signal name="activate" handler="on_quit1_activate"/>
+ <accelerator key="Q" modifiers="GDK_CONTROL_MASK" signal="activate"/>
+
+ <child internal-child="image">
+ <widget class="GtkImage" id="image42">
+ <property name="visible">True</property>
+ <property name="stock">gtk-quit</property>
+ <property name="icon_size">1</property>
+ <property name="xalign">0.5</property>
+ <property name="yalign">0.5</property>
+ <property name="xpad">0</property>
+ <property name="ypad">0</property>
+ </widget>
+ </child>
+ </widget>
+ </child>
+ </widget>
+ </child>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkMenuItem" id="options1">
+ <property name="visible">True</property>
+ <property name="label" translatable="yes">_Options</property>
+ <property name="use_underline">True</property>
+
+ <child>
+ <widget class="GtkMenu" id="options1_menu">
+
+ <child>
+ <widget class="GtkCheckMenuItem" id="show_name1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Show name</property>
+ <property name="label" translatable="yes">Show _name</property>
+ <property name="use_underline">True</property>
+ <property name="active">False</property>
+ <signal name="activate" handler="on_show_name1_activate"/>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkCheckMenuItem" id="show_range1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Show range (Y/M/N)</property>
+ <property name="label" translatable="yes">Show _range</property>
+ <property name="use_underline">True</property>
+ <property name="active">False</property>
+ <signal name="activate" handler="on_show_range1_activate"/>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkCheckMenuItem" id="show_data1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Show value of the option</property>
+ <property name="label" translatable="yes">Show _data</property>
+ <property name="use_underline">True</property>
+ <property name="active">False</property>
+ <signal name="activate" handler="on_show_data1_activate"/>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkSeparatorMenuItem" id="separator2">
+ <property name="visible">True</property>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkCheckMenuItem" id="show_all_options1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Show all options</property>
+ <property name="label" translatable="yes">Show all _options</property>
+ <property name="use_underline">True</property>
+ <property name="active">False</property>
+ <signal name="activate" handler="on_show_all_options1_activate"/>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkCheckMenuItem" id="show_debug_info1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Show masked options</property>
+ <property name="label" translatable="yes">Show _debug info</property>
+ <property name="use_underline">True</property>
+ <property name="active">False</property>
+ <signal name="activate" handler="on_show_debug_info1_activate"/>
+ </widget>
+ </child>
+ </widget>
+ </child>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkMenuItem" id="help1">
+ <property name="visible">True</property>
+ <property name="label" translatable="yes">_Help</property>
+ <property name="use_underline">True</property>
+
+ <child>
+ <widget class="GtkMenu" id="help1_menu">
+
+ <child>
+ <widget class="GtkImageMenuItem" id="introduction1">
+ <property name="visible">True</property>
+ <property name="label" translatable="yes">_Introduction</property>
+ <property name="use_underline">True</property>
+ <signal name="activate" handler="on_introduction1_activate" last_modification_time="Fri, 15 Nov 2002 20:26:30 GMT"/>
+ <accelerator key="I" modifiers="GDK_CONTROL_MASK" signal="activate"/>
+
+ <child internal-child="image">
+ <widget class="GtkImage" id="image43">
+ <property name="visible">True</property>
+ <property name="stock">gtk-dialog-question</property>
+ <property name="icon_size">1</property>
+ <property name="xalign">0.5</property>
+ <property name="yalign">0.5</property>
+ <property name="xpad">0</property>
+ <property name="ypad">0</property>
+ </widget>
+ </child>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkImageMenuItem" id="about1">
+ <property name="visible">True</property>
+ <property name="label" translatable="yes">_About</property>
+ <property name="use_underline">True</property>
+ <signal name="activate" handler="on_about1_activate" last_modification_time="Fri, 15 Nov 2002 20:26:30 GMT"/>
+ <accelerator key="A" modifiers="GDK_CONTROL_MASK" signal="activate"/>
+
+ <child internal-child="image">
+ <widget class="GtkImage" id="image44">
+ <property name="visible">True</property>
+ <property name="stock">gtk-properties</property>
+ <property name="icon_size">1</property>
+ <property name="xalign">0.5</property>
+ <property name="yalign">0.5</property>
+ <property name="xpad">0</property>
+ <property name="ypad">0</property>
+ </widget>
+ </child>
+ </widget>
+ </child>
+
+ <child>
+ <widget class="GtkImageMenuItem" id="license1">
+ <property name="visible">True</property>
+ <property name="label" translatable="yes">_License</property>
+ <property name="use_underline">True</property>
+ <signal name="activate" handler="on_license1_activate" last_modification_time="Fri, 15 Nov 2002 20:26:30 GMT"/>
+
+ <child internal-child="image">
+ <widget class="GtkImage" id="image45">
+ <property name="visible">True</property>
+ <property name="stock">gtk-justify-fill</property>
+ <property name="icon_size">1</property>
+ <property name="xalign">0.5</property>
+ <property name="yalign">0.5</property>
+ <property name="xpad">0</property>
+ <property name="ypad">0</property>
+ </widget>
+ </child>
+ </widget>
+ </child>
+ </widget>
+ </child>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="padding">0</property>
+ <property name="expand">False</property>
+ <property name="fill">False</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkHandleBox" id="handlebox1">
+ <property name="visible">True</property>
+ <property name="shadow_type">GTK_SHADOW_OUT</property>
+ <property name="handle_position">GTK_POS_LEFT</property>
+ <property name="snap_edge">GTK_POS_TOP</property>
+
+ <child>
+ <widget class="GtkToolbar" id="toolbar1">
+ <property name="visible">True</property>
+ <property name="orientation">GTK_ORIENTATION_HORIZONTAL</property>
+ <property name="toolbar_style">GTK_TOOLBAR_BOTH</property>
+ <property name="tooltips">True</property>
+ <property name="show_arrow">True</property>
+
+ <child>
+ <widget class="GtkToolButton" id="button1">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Goes up of one level (single view)</property>
+ <property name="label" translatable="yes">Back</property>
+ <property name="use_underline">True</property>
+ <property name="stock_id">gtk-undo</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+ <signal name="clicked" handler="on_back_clicked"/>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">True</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolItem" id="toolitem1">
+ <property name="visible">True</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+
+ <child>
+ <widget class="GtkVSeparator" id="vseparator1">
+ <property name="visible">True</property>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">False</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolButton" id="button2">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Load a config file</property>
+ <property name="label" translatable="yes">Load</property>
+ <property name="use_underline">True</property>
+ <property name="stock_id">gtk-open</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+ <signal name="clicked" handler="on_load_clicked"/>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">True</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolButton" id="button3">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Save a config file</property>
+ <property name="label" translatable="yes">Save</property>
+ <property name="use_underline">True</property>
+ <property name="stock_id">gtk-save</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+ <signal name="clicked" handler="on_save_activate"/>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">True</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolItem" id="toolitem2">
+ <property name="visible">True</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+
+ <child>
+ <widget class="GtkVSeparator" id="vseparator2">
+ <property name="visible">True</property>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">False</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolButton" id="button4">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Single view</property>
+ <property name="label" translatable="yes">Single</property>
+ <property name="use_underline">True</property>
+ <property name="stock_id">gtk-missing-image</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+ <signal name="clicked" handler="on_single_clicked" last_modification_time="Sun, 12 Jan 2003 14:28:39 GMT"/>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">True</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolButton" id="button5">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Split view</property>
+ <property name="label" translatable="yes">Split</property>
+ <property name="use_underline">True</property>
+ <property name="stock_id">gtk-missing-image</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+ <signal name="clicked" handler="on_split_clicked" last_modification_time="Sun, 12 Jan 2003 14:28:45 GMT"/>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">True</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolButton" id="button6">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Full view</property>
+ <property name="label" translatable="yes">Full</property>
+ <property name="use_underline">True</property>
+ <property name="stock_id">gtk-missing-image</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+ <signal name="clicked" handler="on_full_clicked" last_modification_time="Sun, 12 Jan 2003 14:28:50 GMT"/>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">True</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolItem" id="toolitem3">
+ <property name="visible">True</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+
+ <child>
+ <widget class="GtkVSeparator" id="vseparator3">
+ <property name="visible">True</property>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">False</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolButton" id="button7">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Collapse the whole tree in the right frame</property>
+ <property name="label" translatable="yes">Collapse</property>
+ <property name="use_underline">True</property>
+ <property name="stock_id">gtk-remove</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+ <signal name="clicked" handler="on_collapse_clicked"/>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">True</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkToolButton" id="button8">
+ <property name="visible">True</property>
+ <property name="tooltip" translatable="yes">Expand the whole tree in the right frame</property>
+ <property name="label" translatable="yes">Expand</property>
+ <property name="use_underline">True</property>
+ <property name="stock_id">gtk-add</property>
+ <property name="visible_horizontal">True</property>
+ <property name="visible_vertical">True</property>
+ <property name="is_important">False</property>
+ <signal name="clicked" handler="on_expand_clicked"/>
+ </widget>
+ <packing>
+ <property name="expand">False</property>
+ <property name="homogeneous">True</property>
+ </packing>
+ </child>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="padding">0</property>
+ <property name="expand">False</property>
+ <property name="fill">False</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkHPaned" id="hpaned1">
+ <property name="width_request">1</property>
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="position">0</property>
+
+ <child>
+ <widget class="GtkScrolledWindow" id="scrolledwindow1">
+ <property name="visible">True</property>
+ <property name="hscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="vscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="shadow_type">GTK_SHADOW_IN</property>
+ <property name="window_placement">GTK_CORNER_TOP_LEFT</property>
+
+ <child>
+ <widget class="GtkTreeView" id="treeview1">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="headers_visible">True</property>
+ <property name="rules_hint">False</property>
+ <property name="reorderable">False</property>
+ <property name="enable_search">True</property>
+ <signal name="cursor_changed" handler="on_treeview2_cursor_changed" last_modification_time="Sun, 12 Jan 2003 15:58:22 GMT"/>
+ <signal name="button_press_event" handler="on_treeview1_button_press_event" last_modification_time="Sun, 12 Jan 2003 16:03:52 GMT"/>
+ <signal name="key_press_event" handler="on_treeview2_key_press_event" last_modification_time="Sun, 12 Jan 2003 16:11:44 GMT"/>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="shrink">True</property>
+ <property name="resize">False</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkVPaned" id="vpaned1">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="position">0</property>
+
+ <child>
+ <widget class="GtkScrolledWindow" id="scrolledwindow2">
+ <property name="visible">True</property>
+ <property name="hscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="vscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="shadow_type">GTK_SHADOW_IN</property>
+ <property name="window_placement">GTK_CORNER_TOP_LEFT</property>
+
+ <child>
+ <widget class="GtkTreeView" id="treeview2">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="has_focus">True</property>
+ <property name="headers_visible">True</property>
+ <property name="rules_hint">False</property>
+ <property name="reorderable">False</property>
+ <property name="enable_search">True</property>
+ <signal name="cursor_changed" handler="on_treeview2_cursor_changed" last_modification_time="Sun, 12 Jan 2003 15:57:55 GMT"/>
+ <signal name="button_press_event" handler="on_treeview2_button_press_event" last_modification_time="Sun, 12 Jan 2003 15:57:58 GMT"/>
+ <signal name="key_press_event" handler="on_treeview2_key_press_event" last_modification_time="Sun, 12 Jan 2003 15:58:01 GMT"/>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="shrink">True</property>
+ <property name="resize">False</property>
+ </packing>
+ </child>
+
+ <child>
+ <widget class="GtkScrolledWindow" id="scrolledwindow3">
+ <property name="visible">True</property>
+ <property name="hscrollbar_policy">GTK_POLICY_NEVER</property>
+ <property name="vscrollbar_policy">GTK_POLICY_AUTOMATIC</property>
+ <property name="shadow_type">GTK_SHADOW_IN</property>
+ <property name="window_placement">GTK_CORNER_TOP_LEFT</property>
+
+ <child>
+ <widget class="GtkTextView" id="textview3">
+ <property name="visible">True</property>
+ <property name="can_focus">True</property>
+ <property name="editable">False</property>
+ <property name="overwrite">False</property>
+ <property name="accepts_tab">True</property>
+ <property name="justification">GTK_JUSTIFY_LEFT</property>
+ <property name="wrap_mode">GTK_WRAP_WORD</property>
+ <property name="cursor_visible">True</property>
+ <property name="pixels_above_lines">0</property>
+ <property name="pixels_below_lines">0</property>
+ <property name="pixels_inside_wrap">0</property>
+ <property name="left_margin">0</property>
+ <property name="right_margin">0</property>
+ <property name="indent">0</property>
+ <property name="text" translatable="yes">Sorry, no help available for this option yet.</property>
+ </widget>
+ </child>
+ </widget>
+ <packing>
+ <property name="shrink">True</property>
+ <property name="resize">True</property>
+ </packing>
+ </child>
+ </widget>
+ <packing>
+ <property name="shrink">True</property>
+ <property name="resize">True</property>
+ </packing>
+ </child>
+ </widget>
+ <packing>
+ <property name="padding">0</property>
+ <property name="expand">True</property>
+ <property name="fill">True</property>
+ </packing>
+ </child>
+ </widget>
+ </child>
+</widget>
+
+</glade-interface>
diff --git a/util/kconfig/images.c b/util/kconfig/images.c
new file mode 100644
index 0000000..d4f84bd
--- /dev/null
+++ b/util/kconfig/images.c
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+static const char *xpm_load[] = {
+"22 22 5 1",
+". c None",
+"# c #000000",
+"c c #838100",
+"a c #ffff00",
+"b c #ffffff",
+"......................",
+"......................",
+"......................",
+"............####....#.",
+"...........#....##.##.",
+"..................###.",
+".................####.",
+".####...........#####.",
+"#abab##########.......",
+"#babababababab#.......",
+"#ababababababa#.......",
+"#babababababab#.......",
+"#ababab###############",
+"#babab##cccccccccccc##",
+"#abab##cccccccccccc##.",
+"#bab##cccccccccccc##..",
+"#ab##cccccccccccc##...",
+"#b##cccccccccccc##....",
+"###cccccccccccc##.....",
+"##cccccccccccc##......",
+"###############.......",
+"......................"};
+
+static const char *xpm_save[] = {
+"22 22 5 1",
+". c None",
+"# c #000000",
+"a c #838100",
+"b c #c5c2c5",
+"c c #cdb6d5",
+"......................",
+".####################.",
+".#aa#bbbbbbbbbbbb#bb#.",
+".#aa#bbbbbbbbbbbb#bb#.",
+".#aa#bbbbbbbbbcbb####.",
+".#aa#bbbccbbbbbbb#aa#.",
+".#aa#bbbccbbbbbbb#aa#.",
+".#aa#bbbbbbbbbbbb#aa#.",
+".#aa#bbbbbbbbbbbb#aa#.",
+".#aa#bbbbbbbbbbbb#aa#.",
+".#aa#bbbbbbbbbbbb#aa#.",
+".#aaa############aaa#.",
+".#aaaaaaaaaaaaaaaaaa#.",
+".#aaaaaaaaaaaaaaaaaa#.",
+".#aaa#############aa#.",
+".#aaa#########bbb#aa#.",
+".#aaa#########bbb#aa#.",
+".#aaa#########bbb#aa#.",
+".#aaa#########bbb#aa#.",
+".#aaa#########bbb#aa#.",
+"..##################..",
+"......................"};
+
+static const char *xpm_back[] = {
+"22 22 3 1",
+". c None",
+"# c #000083",
+"a c #838183",
+"......................",
+"......................",
+"......................",
+"......................",
+"......................",
+"...........######a....",
+"..#......##########...",
+"..##...####......##a..",
+"..###.###.........##..",
+"..######..........##..",
+"..#####...........##..",
+"..######..........##..",
+"..#######.........##..",
+"..########.......##a..",
+"...............a###...",
+"...............###....",
+"......................",
+"......................",
+"......................",
+"......................",
+"......................",
+"......................"};
+
+static const char *xpm_tree_view[] = {
+"22 22 2 1",
+". c None",
+"# c #000000",
+"......................",
+"......................",
+"......#...............",
+"......#...............",
+"......#...............",
+"......#...............",
+"......#...............",
+"......########........",
+"......#...............",
+"......#...............",
+"......#...............",
+"......#...............",
+"......#...............",
+"......########........",
+"......#...............",
+"......#...............",
+"......#...............",
+"......#...............",
+"......#...............",
+"......########........",
+"......................",
+"......................"};
+
+static const char *xpm_single_view[] = {
+"22 22 2 1",
+". c None",
+"# c #000000",
+"......................",
+"......................",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"..........#...........",
+"......................",
+"......................"};
+
+static const char *xpm_split_view[] = {
+"22 22 2 1",
+". c None",
+"# c #000000",
+"......................",
+"......................",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......#......#........",
+"......................",
+"......................"};
+
+static const char *xpm_symbol_no[] = {
+"12 12 2 1",
+" c white",
+". c black",
+" ",
+" .......... ",
+" . . ",
+" . . ",
+" . . ",
+" . . ",
+" . . ",
+" . . ",
+" . . ",
+" . . ",
+" .......... ",
+" "};
+
+static const char *xpm_symbol_mod[] = {
+"12 12 2 1",
+" c white",
+". c black",
+" ",
+" .......... ",
+" . . ",
+" . . ",
+" . .. . ",
+" . .... . ",
+" . .... . ",
+" . .. . ",
+" . . ",
+" . . ",
+" .......... ",
+" "};
+
+static const char *xpm_symbol_yes[] = {
+"12 12 2 1",
+" c white",
+". c black",
+" ",
+" .......... ",
+" . . ",
+" . . ",
+" . . . ",
+" . .. . ",
+" . . .. . ",
+" . .... . ",
+" . .. . ",
+" . . ",
+" .......... ",
+" "};
+
+static const char *xpm_choice_no[] = {
+"12 12 2 1",
+" c white",
+". c black",
+" ",
+" .... ",
+" .. .. ",
+" . . ",
+" . . ",
+" . . ",
+" . . ",
+" . . ",
+" . . ",
+" .. .. ",
+" .... ",
+" "};
+
+static const char *xpm_choice_yes[] = {
+"12 12 2 1",
+" c white",
+". c black",
+" ",
+" .... ",
+" .. .. ",
+" . . ",
+" . .. . ",
+" . .... . ",
+" . .... . ",
+" . .. . ",
+" . . ",
+" .. .. ",
+" .... ",
+" "};
+
+static const char *xpm_menu[] = {
+"12 12 2 1",
+" c white",
+". c black",
+" ",
+" .......... ",
+" . . ",
+" . .. . ",
+" . .... . ",
+" . ...... . ",
+" . ...... . ",
+" . .... . ",
+" . .. . ",
+" . . ",
+" .......... ",
+" "};
+
+static const char *xpm_menu_inv[] = {
+"12 12 2 1",
+" c white",
+". c black",
+" ",
+" .......... ",
+" .......... ",
+" .. ...... ",
+" .. .... ",
+" .. .. ",
+" .. .. ",
+" .. .... ",
+" .. ...... ",
+" .......... ",
+" .......... ",
+" "};
+
+static const char *xpm_menuback[] = {
+"12 12 2 1",
+" c white",
+". c black",
+" ",
+" .......... ",
+" . . ",
+" . .. . ",
+" . .... . ",
+" . ...... . ",
+" . ...... . ",
+" . .... . ",
+" . .. . ",
+" . . ",
+" .......... ",
+" "};
+
+static const char *xpm_void[] = {
+"12 12 2 1",
+" c white",
+". c black",
+" ",
+" ",
+" ",
+" ",
+" ",
+" ",
+" ",
+" ",
+" ",
+" ",
+" ",
+" "};
diff --git a/util/kconfig/kconfig_load.c b/util/kconfig/kconfig_load.c
new file mode 100644
index 0000000..03dd338
--- /dev/null
+++ b/util/kconfig/kconfig_load.c
@@ -0,0 +1,35 @@
+#include <dlfcn.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "lkc.h"
+
+#define P(name,type,arg) type (*name ## _p) arg
+#include "lkc_proto.h"
+#undef P
+
+void kconfig_load(void)
+{
+ void *handle;
+ char *error;
+
+ handle = dlopen("./libkconfig.so", RTLD_LAZY);
+ if (!handle) {
+ handle = dlopen("./util/kconfig/libkconfig.so", RTLD_LAZY);
+ if (!handle) {
+ fprintf(stderr, "%s\n", dlerror());
+ exit(1);
+ }
+ }
+
+#define P(name,type,arg) \
+{ \
+ name ## _p = dlsym(handle, #name); \
+ if ((error = dlerror())) { \
+ fprintf(stderr, "%s\n", error); \
+ exit(1); \
+ } \
+}
+#include "lkc_proto.h"
+#undef P
+}
diff --git a/util/kconfig/kxgettext.c b/util/kconfig/kxgettext.c
new file mode 100644
index 0000000..6eb72a7
--- /dev/null
+++ b/util/kconfig/kxgettext.c
@@ -0,0 +1,229 @@
+/*
+ * Arnaldo Carvalho de Melo <acme@conectiva.com.br>, 2005
+ *
+ * Released under the terms of the GNU GPL v2.0
+ */
+
+#include <stdlib.h>
+#include <string.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+static char *escape(const char* text, char *bf, int len)
+{
+ char *bfp = bf;
+ int multiline = strchr(text, '\n') != NULL;
+ int eol = 0;
+ int textlen = strlen(text);
+
+ if ((textlen > 0) && (text[textlen-1] == '\n'))
+ eol = 1;
+
+ *bfp++ = '"';
+ --len;
+
+ if (multiline) {
+ *bfp++ = '"';
+ *bfp++ = '\n';
+ *bfp++ = '"';
+ len -= 3;
+ }
+
+ while (*text != '\0' && len > 1) {
+ if (*text == '"')
+ *bfp++ = '\\';
+ else if (*text == '\n') {
+ *bfp++ = '\\';
+ *bfp++ = 'n';
+ *bfp++ = '"';
+ *bfp++ = '\n';
+ *bfp++ = '"';
+ len -= 5;
+ ++text;
+ goto next;
+ }
+ *bfp++ = *text++;
+next:
+ --len;
+ }
+
+ if (multiline && eol)
+ bfp -= 3;
+
+ *bfp++ = '"';
+ *bfp = '\0';
+
+ return bf;
+}
+
+struct file_line {
+ struct file_line *next;
+ char* file;
+ int lineno;
+};
+
+static struct file_line *file_line__new(char *file, int lineno)
+{
+ struct file_line *self = malloc(sizeof(*self));
+
+ if (self == NULL)
+ goto out;
+
+ self->file = file;
+ self->lineno = lineno;
+ self->next = NULL;
+out:
+ return self;
+}
+
+struct message {
+ const char *msg;
+ const char *option;
+ struct message *next;
+ struct file_line *files;
+};
+
+static struct message *message__list;
+
+static struct message *message__new(const char *msg, char *option, char *file, int lineno)
+{
+ struct message *self = malloc(sizeof(*self));
+
+ if (self == NULL)
+ goto out;
+
+ self->files = file_line__new(file, lineno);
+ if (self->files == NULL)
+ goto out_fail;
+
+ self->msg = strdup(msg);
+ if (self->msg == NULL)
+ goto out_fail_msg;
+
+ self->option = option;
+ self->next = NULL;
+out:
+ return self;
+out_fail_msg:
+ free(self->files);
+out_fail:
+ free(self);
+ self = NULL;
+ goto out;
+}
+
+static struct message *mesage__find(const char *msg)
+{
+ struct message *m = message__list;
+
+ while (m != NULL) {
+ if (strcmp(m->msg, msg) == 0)
+ break;
+ m = m->next;
+ }
+
+ return m;
+}
+
+static int message__add_file_line(struct message *self, char *file, int lineno)
+{
+ int rc = -1;
+ struct file_line *fl = file_line__new(file, lineno);
+
+ if (fl == NULL)
+ goto out;
+
+ fl->next = self->files;
+ self->files = fl;
+ rc = 0;
+out:
+ return rc;
+}
+
+static int message__add(const char *msg, char *option, char *file, int lineno)
+{
+ int rc = 0;
+ char bf[16384];
+ char *escaped = escape(msg, bf, sizeof(bf));
+ struct message *m = mesage__find(escaped);
+
+ if (m != NULL)
+ rc = message__add_file_line(m, file, lineno);
+ else {
+ m = message__new(escaped, option, file, lineno);
+
+ if (m != NULL) {
+ m->next = message__list;
+ message__list = m;
+ } else
+ rc = -1;
+ }
+ return rc;
+}
+
+void menu_build_message_list(struct menu *menu)
+{
+ struct menu *child;
+
+ message__add(menu_get_prompt(menu), NULL,
+ menu->file == NULL ? "Root Menu" : menu->file->name,
+ menu->lineno);
+
+ if (menu->sym != NULL && menu_has_help(menu))
+ message__add(menu_get_help(menu), menu->sym->name,
+ menu->file == NULL ? "Root Menu" : menu->file->name,
+ menu->lineno);
+
+ for (child = menu->list; child != NULL; child = child->next)
+ if (child->prompt != NULL)
+ menu_build_message_list(child);
+}
+
+static void message__print_file_lineno(struct message *self)
+{
+ struct file_line *fl = self->files;
+
+ putchar('\n');
+ if (self->option != NULL)
+ printf("# %s:00000\n", self->option);
+
+ printf("#: %s:%d", fl->file, fl->lineno);
+ fl = fl->next;
+
+ while (fl != NULL) {
+ printf(", %s:%d", fl->file, fl->lineno);
+ fl = fl->next;
+ }
+
+ putchar('\n');
+}
+
+static void message__print_gettext_msgid_msgstr(struct message *self)
+{
+ message__print_file_lineno(self);
+
+ printf("msgid %s\n"
+ "msgstr \"\"\n", self->msg);
+}
+
+void menu__xgettext(void)
+{
+ struct message *m = message__list;
+
+ while (m != NULL) {
+ /* skip empty lines ("") */
+ if (strlen(m->msg) > sizeof("\"\""))
+ message__print_gettext_msgid_msgstr(m);
+ m = m->next;
+ }
+}
+
+int main(int ac, char **av)
+{
+ conf_parse(av[1]);
+
+ menu_build_message_list(menu_get_root_menu(NULL));
+ menu__xgettext();
+ return 0;
+}
diff --git a/util/kconfig/lex.zconf.c_shipped b/util/kconfig/lex.zconf.c_shipped
new file mode 100644
index 0000000..1911092
--- /dev/null
+++ b/util/kconfig/lex.zconf.c_shipped
@@ -0,0 +1,2374 @@
+
+#line 3 "util/kconfig/lex.zconf.c"
+
+#define YY_INT_ALIGNED short int
+
+/* A lexical scanner generated by flex */
+
+#define yy_create_buffer zconf_create_buffer
+#define yy_delete_buffer zconf_delete_buffer
+#define yy_flex_debug zconf_flex_debug
+#define yy_init_buffer zconf_init_buffer
+#define yy_flush_buffer zconf_flush_buffer
+#define yy_load_buffer_state zconf_load_buffer_state
+#define yy_switch_to_buffer zconf_switch_to_buffer
+#define yyin zconfin
+#define yyleng zconfleng
+#define yylex zconflex
+#define yylineno zconflineno
+#define yyout zconfout
+#define yyrestart zconfrestart
+#define yytext zconftext
+#define yywrap zconfwrap
+#define yyalloc zconfalloc
+#define yyrealloc zconfrealloc
+#define yyfree zconffree
+
+#define FLEX_SCANNER
+#define YY_FLEX_MAJOR_VERSION 2
+#define YY_FLEX_MINOR_VERSION 5
+#define YY_FLEX_SUBMINOR_VERSION 33
+#if YY_FLEX_SUBMINOR_VERSION > 0
+#define FLEX_BETA
+#endif
+
+/* First, we deal with platform-specific or compiler-specific issues. */
+
+/* begin standard C headers. */
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <stdlib.h>
+
+/* end standard C headers. */
+
+/* flex integer type definitions */
+
+#ifndef FLEXINT_H
+#define FLEXINT_H
+
+/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
+
+#if __STDC_VERSION__ >= 199901L
+
+/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
+ * if you want the limit (max/min) macros for int types.
+ */
+#ifndef __STDC_LIMIT_MACROS
+#define __STDC_LIMIT_MACROS 1
+#endif
+
+#include <inttypes.h>
+typedef int8_t flex_int8_t;
+typedef uint8_t flex_uint8_t;
+typedef int16_t flex_int16_t;
+typedef uint16_t flex_uint16_t;
+typedef int32_t flex_int32_t;
+typedef uint32_t flex_uint32_t;
+#else
+typedef signed char flex_int8_t;
+typedef short int flex_int16_t;
+typedef int flex_int32_t;
+typedef unsigned char flex_uint8_t;
+typedef unsigned short int flex_uint16_t;
+typedef unsigned int flex_uint32_t;
+#endif /* ! C99 */
+
+/* Limits of integral types. */
+#ifndef INT8_MIN
+#define INT8_MIN (-128)
+#endif
+#ifndef INT16_MIN
+#define INT16_MIN (-32767-1)
+#endif
+#ifndef INT32_MIN
+#define INT32_MIN (-2147483647-1)
+#endif
+#ifndef INT8_MAX
+#define INT8_MAX (127)
+#endif
+#ifndef INT16_MAX
+#define INT16_MAX (32767)
+#endif
+#ifndef INT32_MAX
+#define INT32_MAX (2147483647)
+#endif
+#ifndef UINT8_MAX
+#define UINT8_MAX (255U)
+#endif
+#ifndef UINT16_MAX
+#define UINT16_MAX (65535U)
+#endif
+#ifndef UINT32_MAX
+#define UINT32_MAX (4294967295U)
+#endif
+
+#endif /* ! FLEXINT_H */
+
+#ifdef __cplusplus
+
+/* The "const" storage-class-modifier is valid. */
+#define YY_USE_CONST
+
+#else /* ! __cplusplus */
+
+#if __STDC__
+
+#define YY_USE_CONST
+
+#endif /* __STDC__ */
+#endif /* ! __cplusplus */
+
+#ifdef YY_USE_CONST
+#define yyconst const
+#else
+#define yyconst
+#endif
+
+/* Returned upon end-of-file. */
+#define YY_NULL 0
+
+/* Promotes a possibly negative, possibly signed char to an unsigned
+ * integer for use as an array index. If the signed char is negative,
+ * we want to instead treat it as an 8-bit unsigned char, hence the
+ * double cast.
+ */
+#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
+
+/* Enter a start condition. This macro really ought to take a parameter,
+ * but we do it the disgusting crufty way forced on us by the ()-less
+ * definition of BEGIN.
+ */
+#define BEGIN (yy_start) = 1 + 2 *
+
+/* Translate the current start state into a value that can be later handed
+ * to BEGIN to return to the state. The YYSTATE alias is for lex
+ * compatibility.
+ */
+#define YY_START (((yy_start) - 1) / 2)
+#define YYSTATE YY_START
+
+/* Action number for EOF rule of a given start state. */
+#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
+
+/* Special action meaning "start processing a new file". */
+#define YY_NEW_FILE zconfrestart(zconfin )
+
+#define YY_END_OF_BUFFER_CHAR 0
+
+/* Size of default input buffer. */
+#ifndef YY_BUF_SIZE
+#define YY_BUF_SIZE 16384
+#endif
+
+/* The state buf must be large enough to hold one state per character in the main buffer.
+ */
+#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
+
+#ifndef YY_TYPEDEF_YY_BUFFER_STATE
+#define YY_TYPEDEF_YY_BUFFER_STATE
+typedef struct yy_buffer_state *YY_BUFFER_STATE;
+#endif
+
+extern int zconfleng;
+
+extern FILE *zconfin, *zconfout;
+
+#define EOB_ACT_CONTINUE_SCAN 0
+#define EOB_ACT_END_OF_FILE 1
+#define EOB_ACT_LAST_MATCH 2
+
+ #define YY_LESS_LINENO(n)
+
+/* Return all but the first "n" matched characters back to the input stream. */
+#define yyless(n) \
+ do \
+ { \
+ /* Undo effects of setting up zconftext. */ \
+ int yyless_macro_arg = (n); \
+ YY_LESS_LINENO(yyless_macro_arg);\
+ *yy_cp = (yy_hold_char); \
+ YY_RESTORE_YY_MORE_OFFSET \
+ (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
+ YY_DO_BEFORE_ACTION; /* set up zconftext again */ \
+ } \
+ while ( 0 )
+
+#define unput(c) yyunput( c, (yytext_ptr) )
+
+/* The following is because we cannot portably get our hands on size_t
+ * (without autoconf's help, which isn't available because we want
+ * flex-generated scanners to compile on their own).
+ */
+
+#ifndef YY_TYPEDEF_YY_SIZE_T
+#define YY_TYPEDEF_YY_SIZE_T
+typedef unsigned int yy_size_t;
+#endif
+
+#ifndef YY_STRUCT_YY_BUFFER_STATE
+#define YY_STRUCT_YY_BUFFER_STATE
+struct yy_buffer_state
+ {
+ FILE *yy_input_file;
+
+ char *yy_ch_buf; /* input buffer */
+ char *yy_buf_pos; /* current position in input buffer */
+
+ /* Size of input buffer in bytes, not including room for EOB
+ * characters.
+ */
+ yy_size_t yy_buf_size;
+
+ /* Number of characters read into yy_ch_buf, not including EOB
+ * characters.
+ */
+ int yy_n_chars;
+
+ /* Whether we "own" the buffer - i.e., we know we created it,
+ * and can realloc() it to grow it, and should free() it to
+ * delete it.
+ */
+ int yy_is_our_buffer;
+
+ /* Whether this is an "interactive" input source; if so, and
+ * if we're using stdio for input, then we want to use getc()
+ * instead of fread(), to make sure we stop fetching input after
+ * each newline.
+ */
+ int yy_is_interactive;
+
+ /* Whether we're considered to be at the beginning of a line.
+ * If so, '^' rules will be active on the next match, otherwise
+ * not.
+ */
+ int yy_at_bol;
+
+ int yy_bs_lineno; /**< The line count. */
+ int yy_bs_column; /**< The column count. */
+
+ /* Whether to try to fill the input buffer when we reach the
+ * end of it.
+ */
+ int yy_fill_buffer;
+
+ int yy_buffer_status;
+
+#define YY_BUFFER_NEW 0
+#define YY_BUFFER_NORMAL 1
+ /* When an EOF's been seen but there's still some text to process
+ * then we mark the buffer as YY_EOF_PENDING, to indicate that we
+ * shouldn't try reading from the input source any more. We might
+ * still have a bunch of tokens to match, though, because of
+ * possible backing-up.
+ *
+ * When we actually see the EOF, we change the status to "new"
+ * (via zconfrestart()), so that the user can continue scanning by
+ * just pointing zconfin at a new input file.
+ */
+#define YY_BUFFER_EOF_PENDING 2
+
+ };
+#endif /* !YY_STRUCT_YY_BUFFER_STATE */
+
+/* Stack of input buffers. */
+static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
+static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
+static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
+
+/* We provide macros for accessing buffer states in case in the
+ * future we want to put the buffer states in a more general
+ * "scanner state".
+ *
+ * Returns the top of the stack, or NULL.
+ */
+#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
+ ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
+ : NULL)
+
+/* Same as previous macro, but useful when we know that the buffer stack is not
+ * NULL or when we need an lvalue. For internal use only.
+ */
+#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
+
+/* yy_hold_char holds the character lost when zconftext is formed. */
+static char yy_hold_char;
+static int yy_n_chars; /* number of characters read into yy_ch_buf */
+int zconfleng;
+
+/* Points to current character in buffer. */
+static char *yy_c_buf_p = (char *) 0;
+static int yy_init = 0; /* whether we need to initialize */
+static int yy_start = 0; /* start state number */
+
+/* Flag which is used to allow zconfwrap()'s to do buffer switches
+ * instead of setting up a fresh zconfin. A bit of a hack ...
+ */
+static int yy_did_buffer_switch_on_eof;
+
+void zconfrestart (FILE *input_file );
+void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer );
+YY_BUFFER_STATE zconf_create_buffer (FILE *file,int size );
+void zconf_delete_buffer (YY_BUFFER_STATE b );
+void zconf_flush_buffer (YY_BUFFER_STATE b );
+void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer );
+void zconfpop_buffer_state (void );
+
+static void zconfensure_buffer_stack (void );
+static void zconf_load_buffer_state (void );
+static void zconf_init_buffer (YY_BUFFER_STATE b,FILE *file );
+
+#define YY_FLUSH_BUFFER zconf_flush_buffer(YY_CURRENT_BUFFER )
+
+YY_BUFFER_STATE zconf_scan_buffer (char *base,yy_size_t size );
+YY_BUFFER_STATE zconf_scan_string (yyconst char *yy_str );
+YY_BUFFER_STATE zconf_scan_bytes (yyconst char *bytes,int len );
+
+void *zconfalloc (yy_size_t );
+void *zconfrealloc (void *,yy_size_t );
+void zconffree (void * );
+
+#define yy_new_buffer zconf_create_buffer
+
+#define yy_set_interactive(is_interactive) \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){ \
+ zconfensure_buffer_stack (); \
+ YY_CURRENT_BUFFER_LVALUE = \
+ zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
+ }
+
+#define yy_set_bol(at_bol) \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){\
+ zconfensure_buffer_stack (); \
+ YY_CURRENT_BUFFER_LVALUE = \
+ zconf_create_buffer(zconfin,YY_BUF_SIZE ); \
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
+ }
+
+#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
+
+/* Begin user sect3 */
+
+#define zconfwrap(n) 1
+#define YY_SKIP_YYWRAP
+
+typedef unsigned char YY_CHAR;
+
+FILE *zconfin = (FILE *) 0, *zconfout = (FILE *) 0;
+
+typedef int yy_state_type;
+
+extern int zconflineno;
+
+int zconflineno = 1;
+
+extern char *zconftext;
+#define yytext_ptr zconftext
+static yyconst flex_int16_t yy_nxt[][17] =
+ {
+ {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0
+ },
+
+ {
+ 11, 12, 13, 14, 12, 12, 15, 12, 12, 12,
+ 12, 12, 12, 12, 12, 12, 12
+ },
+
+ {
+ 11, 12, 13, 14, 12, 12, 15, 12, 12, 12,
+ 12, 12, 12, 12, 12, 12, 12
+ },
+
+ {
+ 11, 16, 16, 17, 16, 16, 16, 16, 16, 16,
+ 16, 16, 16, 18, 16, 16, 16
+ },
+
+ {
+ 11, 16, 16, 17, 16, 16, 16, 16, 16, 16,
+ 16, 16, 16, 18, 16, 16, 16
+
+ },
+
+ {
+ 11, 19, 20, 21, 19, 19, 19, 19, 19, 19,
+ 19, 19, 19, 19, 19, 19, 19
+ },
+
+ {
+ 11, 19, 20, 21, 19, 19, 19, 19, 19, 19,
+ 19, 19, 19, 19, 19, 19, 19
+ },
+
+ {
+ 11, 22, 22, 23, 22, 24, 22, 22, 24, 22,
+ 22, 22, 22, 22, 22, 25, 22
+ },
+
+ {
+ 11, 22, 22, 23, 22, 24, 22, 22, 24, 22,
+ 22, 22, 22, 22, 22, 25, 22
+ },
+
+ {
+ 11, 26, 26, 27, 28, 29, 30, 31, 29, 32,
+ 33, 34, 35, 35, 36, 37, 38
+
+ },
+
+ {
+ 11, 26, 26, 27, 28, 29, 30, 31, 29, 32,
+ 33, 34, 35, 35, 36, 37, 38
+ },
+
+ {
+ -11, -11, -11, -11, -11, -11, -11, -11, -11, -11,
+ -11, -11, -11, -11, -11, -11, -11
+ },
+
+ {
+ 11, -12, -12, -12, -12, -12, -12, -12, -12, -12,
+ -12, -12, -12, -12, -12, -12, -12
+ },
+
+ {
+ 11, -13, 39, 40, -13, -13, 41, -13, -13, -13,
+ -13, -13, -13, -13, -13, -13, -13
+ },
+
+ {
+ 11, -14, -14, -14, -14, -14, -14, -14, -14, -14,
+ -14, -14, -14, -14, -14, -14, -14
+
+ },
+
+ {
+ 11, 42, 42, 43, 42, 42, 42, 42, 42, 42,
+ 42, 42, 42, 42, 42, 42, 42
+ },
+
+ {
+ 11, -16, -16, -16, -16, -16, -16, -16, -16, -16,
+ -16, -16, -16, -16, -16, -16, -16
+ },
+
+ {
+ 11, -17, -17, -17, -17, -17, -17, -17, -17, -17,
+ -17, -17, -17, -17, -17, -17, -17
+ },
+
+ {
+ 11, -18, -18, -18, -18, -18, -18, -18, -18, -18,
+ -18, -18, -18, 44, -18, -18, -18
+ },
+
+ {
+ 11, 45, 45, -19, 45, 45, 45, 45, 45, 45,
+ 45, 45, 45, 45, 45, 45, 45
+
+ },
+
+ {
+ 11, -20, 46, 47, -20, -20, -20, -20, -20, -20,
+ -20, -20, -20, -20, -20, -20, -20
+ },
+
+ {
+ 11, 48, -21, -21, 48, 48, 48, 48, 48, 48,
+ 48, 48, 48, 48, 48, 48, 48
+ },
+
+ {
+ 11, 49, 49, 50, 49, -22, 49, 49, -22, 49,
+ 49, 49, 49, 49, 49, -22, 49
+ },
+
+ {
+ 11, -23, -23, -23, -23, -23, -23, -23, -23, -23,
+ -23, -23, -23, -23, -23, -23, -23
+ },
+
+ {
+ 11, -24, -24, -24, -24, -24, -24, -24, -24, -24,
+ -24, -24, -24, -24, -24, -24, -24
+
+ },
+
+ {
+ 11, 51, 51, 52, 51, 51, 51, 51, 51, 51,
+ 51, 51, 51, 51, 51, 51, 51
+ },
+
+ {
+ 11, -26, -26, -26, -26, -26, -26, -26, -26, -26,
+ -26, -26, -26, -26, -26, -26, -26
+ },
+
+ {
+ 11, -27, -27, -27, -27, -27, -27, -27, -27, -27,
+ -27, -27, -27, -27, -27, -27, -27
+ },
+
+ {
+ 11, -28, -28, -28, -28, -28, -28, -28, -28, -28,
+ -28, -28, -28, -28, 53, -28, -28
+ },
+
+ {
+ 11, -29, -29, -29, -29, -29, -29, -29, -29, -29,
+ -29, -29, -29, -29, -29, -29, -29
+
+ },
+
+ {
+ 11, 54, 54, -30, 54, 54, 54, 54, 54, 54,
+ 54, 54, 54, 54, 54, 54, 54
+ },
+
+ {
+ 11, -31, -31, -31, -31, -31, -31, 55, -31, -31,
+ -31, -31, -31, -31, -31, -31, -31
+ },
+
+ {
+ 11, -32, -32, -32, -32, -32, -32, -32, -32, -32,
+ -32, -32, -32, -32, -32, -32, -32
+ },
+
+ {
+ 11, -33, -33, -33, -33, -33, -33, -33, -33, -33,
+ -33, -33, -33, -33, -33, -33, -33
+ },
+
+ {
+ 11, -34, -34, -34, -34, -34, -34, -34, -34, -34,
+ -34, 56, 57, 57, -34, -34, -34
+
+ },
+
+ {
+ 11, -35, -35, -35, -35, -35, -35, -35, -35, -35,
+ -35, 57, 57, 57, -35, -35, -35
+ },
+
+ {
+ 11, -36, -36, -36, -36, -36, -36, -36, -36, -36,
+ -36, -36, -36, -36, -36, -36, -36
+ },
+
+ {
+ 11, -37, -37, 58, -37, -37, -37, -37, -37, -37,
+ -37, -37, -37, -37, -37, -37, -37
+ },
+
+ {
+ 11, -38, -38, -38, -38, -38, -38, -38, -38, -38,
+ -38, -38, -38, -38, -38, -38, 59
+ },
+
+ {
+ 11, -39, 39, 40, -39, -39, 41, -39, -39, -39,
+ -39, -39, -39, -39, -39, -39, -39
+
+ },
+
+ {
+ 11, -40, -40, -40, -40, -40, -40, -40, -40, -40,
+ -40, -40, -40, -40, -40, -40, -40
+ },
+
+ {
+ 11, 42, 42, 43, 42, 42, 42, 42, 42, 42,
+ 42, 42, 42, 42, 42, 42, 42
+ },
+
+ {
+ 11, 42, 42, 43, 42, 42, 42, 42, 42, 42,
+ 42, 42, 42, 42, 42, 42, 42
+ },
+
+ {
+ 11, -43, -43, -43, -43, -43, -43, -43, -43, -43,
+ -43, -43, -43, -43, -43, -43, -43
+ },
+
+ {
+ 11, -44, -44, -44, -44, -44, -44, -44, -44, -44,
+ -44, -44, -44, 44, -44, -44, -44
+
+ },
+
+ {
+ 11, 45, 45, -45, 45, 45, 45, 45, 45, 45,
+ 45, 45, 45, 45, 45, 45, 45
+ },
+
+ {
+ 11, -46, 46, 47, -46, -46, -46, -46, -46, -46,
+ -46, -46, -46, -46, -46, -46, -46
+ },
+
+ {
+ 11, 48, -47, -47, 48, 48, 48, 48, 48, 48,
+ 48, 48, 48, 48, 48, 48, 48
+ },
+
+ {
+ 11, -48, -48, -48, -48, -48, -48, -48, -48, -48,
+ -48, -48, -48, -48, -48, -48, -48
+ },
+
+ {
+ 11, 49, 49, 50, 49, -49, 49, 49, -49, 49,
+ 49, 49, 49, 49, 49, -49, 49
+
+ },
+
+ {
+ 11, -50, -50, -50, -50, -50, -50, -50, -50, -50,
+ -50, -50, -50, -50, -50, -50, -50
+ },
+
+ {
+ 11, -51, -51, 52, -51, -51, -51, -51, -51, -51,
+ -51, -51, -51, -51, -51, -51, -51
+ },
+
+ {
+ 11, -52, -52, -52, -52, -52, -52, -52, -52, -52,
+ -52, -52, -52, -52, -52, -52, -52
+ },
+
+ {
+ 11, -53, -53, -53, -53, -53, -53, -53, -53, -53,
+ -53, -53, -53, -53, -53, -53, -53
+ },
+
+ {
+ 11, 54, 54, -54, 54, 54, 54, 54, 54, 54,
+ 54, 54, 54, 54, 54, 54, 54
+
+ },
+
+ {
+ 11, -55, -55, -55, -55, -55, -55, -55, -55, -55,
+ -55, -55, -55, -55, -55, -55, -55
+ },
+
+ {
+ 11, -56, -56, -56, -56, -56, -56, -56, -56, -56,
+ -56, 60, 57, 57, -56, -56, -56
+ },
+
+ {
+ 11, -57, -57, -57, -57, -57, -57, -57, -57, -57,
+ -57, 57, 57, 57, -57, -57, -57
+ },
+
+ {
+ 11, -58, -58, -58, -58, -58, -58, -58, -58, -58,
+ -58, -58, -58, -58, -58, -58, -58
+ },
+
+ {
+ 11, -59, -59, -59, -59, -59, -59, -59, -59, -59,
+ -59, -59, -59, -59, -59, -59, -59
+
+ },
+
+ {
+ 11, -60, -60, -60, -60, -60, -60, -60, -60, -60,
+ -60, 57, 57, 57, -60, -60, -60
+ },
+
+ } ;
+
+static yy_state_type yy_get_previous_state (void );
+static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
+static int yy_get_next_buffer (void );
+static void yy_fatal_error (yyconst char msg[] );
+
+/* Done after the current pattern has been matched and before the
+ * corresponding action - sets up zconftext.
+ */
+#define YY_DO_BEFORE_ACTION \
+ (yytext_ptr) = yy_bp; \
+ zconfleng = (size_t) (yy_cp - yy_bp); \
+ (yy_hold_char) = *yy_cp; \
+ *yy_cp = '\0'; \
+ (yy_c_buf_p) = yy_cp;
+
+#define YY_NUM_RULES 33
+#define YY_END_OF_BUFFER 34
+/* This struct is not used in this scanner,
+ but its presence is necessary. */
+struct yy_trans_info
+ {
+ flex_int32_t yy_verify;
+ flex_int32_t yy_nxt;
+ };
+static yyconst flex_int16_t yy_accept[61] =
+ { 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 34, 5, 4, 2, 3, 7, 8, 6, 32, 29,
+ 31, 24, 28, 27, 26, 22, 17, 13, 16, 20,
+ 22, 11, 12, 19, 19, 14, 22, 22, 4, 2,
+ 3, 3, 1, 6, 32, 29, 31, 30, 24, 23,
+ 26, 25, 15, 20, 9, 19, 19, 21, 10, 18
+ } ;
+
+static yyconst flex_int32_t yy_ec[256] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 2, 4, 5, 6, 1, 1, 7, 8, 9,
+ 10, 1, 1, 1, 11, 12, 12, 13, 13, 13,
+ 13, 13, 13, 13, 13, 13, 13, 1, 1, 1,
+ 14, 1, 1, 1, 13, 13, 13, 13, 13, 13,
+ 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+ 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+ 1, 15, 1, 1, 13, 1, 13, 13, 13, 13,
+
+ 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+ 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+ 13, 13, 1, 16, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1
+ } ;
+
+extern int zconf_flex_debug;
+int zconf_flex_debug = 0;
+
+/* The intent behind this definition is that it'll catch
+ * any uses of REJECT which flex missed.
+ */
+#define REJECT reject_used_but_not_detected
+#define yymore() yymore_used_but_not_detected
+#define YY_MORE_ADJ 0
+#define YY_RESTORE_YY_MORE_OFFSET
+char *zconftext;
+
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+#define START_STRSIZE 16
+
+static struct {
+ struct file *file;
+ int lineno;
+} current_pos;
+
+static char *text;
+static int text_size, text_asize;
+
+struct buffer {
+ struct buffer *parent;
+ YY_BUFFER_STATE state;
+};
+
+struct buffer *current_buf;
+
+static int last_ts, first_ts;
+
+static void zconf_endhelp(void);
+static void zconf_endfile(void);
+
+void new_string(void)
+{
+ text = malloc(START_STRSIZE);
+ text_asize = START_STRSIZE;
+ text_size = 0;
+ *text = 0;
+}
+
+void append_string(const char *str, int size)
+{
+ int new_size = text_size + size + 1;
+ if (new_size > text_asize) {
+ new_size += START_STRSIZE - 1;
+ new_size &= -START_STRSIZE;
+ text = realloc(text, new_size);
+ text_asize = new_size;
+ }
+ memcpy(text + text_size, str, size);
+ text_size += size;
+ text[text_size] = 0;
+}
+
+void alloc_string(const char *str, int size)
+{
+ text = malloc(size + 1);
+ memcpy(text, str, size);
+ text[size] = 0;
+}
+
+#define INITIAL 0
+#define COMMAND 1
+#define HELP 2
+#define STRING 3
+#define PARAM 4
+
+#ifndef YY_NO_UNISTD_H
+/* Special case for "unistd.h", since it is non-ANSI. We include it way
+ * down here because we want the user's section 1 to have been scanned first.
+ * The user has a chance to override it with an option.
+ */
+#include <unistd.h>
+#endif
+
+#ifndef YY_EXTRA_TYPE
+#define YY_EXTRA_TYPE void *
+#endif
+
+static int yy_init_globals (void );
+
+/* Macros after this point can all be overridden by user definitions in
+ * section 1.
+ */
+
+#ifndef YY_SKIP_YYWRAP
+#ifdef __cplusplus
+extern "C" int zconfwrap (void );
+#else
+extern int zconfwrap (void );
+#endif
+#endif
+
+ static void yyunput (int c,char *buf_ptr );
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char *,yyconst char *,int );
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * );
+#endif
+
+#ifndef YY_NO_INPUT
+
+#ifdef __cplusplus
+static int yyinput (void );
+#else
+static int input (void );
+#endif
+
+#endif
+
+/* Amount of stuff to slurp up with each read. */
+#ifndef YY_READ_BUF_SIZE
+#define YY_READ_BUF_SIZE 8192
+#endif
+
+/* Copy whatever the last rule matched to the standard output. */
+#ifndef ECHO
+/* This used to be an fputs(), but since the string might contain NUL's,
+ * we now use fwrite().
+ */
+#define ECHO (void) fwrite( zconftext, zconfleng, 1, zconfout )
+#endif
+
+/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
+ * is returned in "result".
+ */
+#ifndef YY_INPUT
+#define YY_INPUT(buf,result,max_size) \
+ errno=0; \
+ while ( (result = read( fileno(zconfin), (char *) buf, max_size )) < 0 ) \
+ { \
+ if( errno != EINTR) \
+ { \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ break; \
+ } \
+ errno=0; \
+ clearerr(zconfin); \
+ }\
+\
+
+#endif
+
+/* No semi-colon after return; correct usage is to write "yyterminate();" -
+ * we don't want an extra ';' after the "return" because that will cause
+ * some compilers to complain about unreachable statements.
+ */
+#ifndef yyterminate
+#define yyterminate() return YY_NULL
+#endif
+
+/* Number of entries by which start-condition stack grows. */
+#ifndef YY_START_STACK_INCR
+#define YY_START_STACK_INCR 25
+#endif
+
+/* Report a fatal error. */
+#ifndef YY_FATAL_ERROR
+#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
+#endif
+
+/* end tables serialization structures and prototypes */
+
+/* Default declaration of generated scanner - a define so the user can
+ * easily add parameters.
+ */
+#ifndef YY_DECL
+#define YY_DECL_IS_OURS 1
+
+extern int zconflex (void);
+
+#define YY_DECL int zconflex (void)
+#endif /* !YY_DECL */
+
+/* Code executed at the beginning of each rule, after zconftext and zconfleng
+ * have been set up.
+ */
+#ifndef YY_USER_ACTION
+#define YY_USER_ACTION
+#endif
+
+/* Code executed at the end of each rule. */
+#ifndef YY_BREAK
+#define YY_BREAK break;
+#endif
+
+#define YY_RULE_SETUP \
+ YY_USER_ACTION
+
+/** The main scanner function which does all the work.
+ */
+YY_DECL
+{
+ register yy_state_type yy_current_state;
+ register char *yy_cp, *yy_bp;
+ register int yy_act;
+
+ int str = 0;
+ int ts, i;
+
+ if ( !(yy_init) )
+ {
+ (yy_init) = 1;
+
+#ifdef YY_USER_INIT
+ YY_USER_INIT;
+#endif
+
+ if ( ! (yy_start) )
+ (yy_start) = 1; /* first start state */
+
+ if ( ! zconfin )
+ zconfin = stdin;
+
+ if ( ! zconfout )
+ zconfout = stdout;
+
+ if ( ! YY_CURRENT_BUFFER ) {
+ zconfensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ zconf_create_buffer(zconfin,YY_BUF_SIZE );
+ }
+
+ zconf_load_buffer_state( );
+ }
+
+ while ( 1 ) /* loops until end-of-file is reached */
+ {
+ yy_cp = (yy_c_buf_p);
+
+ /* Support of zconftext. */
+ *yy_cp = (yy_hold_char);
+
+ /* yy_bp points to the position in yy_ch_buf of the start of
+ * the current run.
+ */
+ yy_bp = yy_cp;
+
+ yy_current_state = (yy_start);
+yy_match:
+ while ( (yy_current_state = yy_nxt[yy_current_state][ yy_ec[YY_SC_TO_UI(*yy_cp)] ]) > 0 )
+ ++yy_cp;
+
+ yy_current_state = -yy_current_state;
+
+yy_find_action:
+ yy_act = yy_accept[yy_current_state];
+
+ YY_DO_BEFORE_ACTION;
+
+do_action: /* This label is used only to access EOF actions. */
+
+ switch ( yy_act )
+ { /* beginning of action switch */
+case 1:
+/* rule 1 can match eol */
+case 2:
+/* rule 2 can match eol */
+YY_RULE_SETUP
+{
+ current_file->lineno++;
+ return T_EOL;
+}
+ YY_BREAK
+case 3:
+YY_RULE_SETUP
+
+ YY_BREAK
+case 4:
+YY_RULE_SETUP
+{
+ BEGIN(COMMAND);
+}
+ YY_BREAK
+case 5:
+YY_RULE_SETUP
+{
+ unput(zconftext[0]);
+ BEGIN(COMMAND);
+}
+ YY_BREAK
+
+case 6:
+YY_RULE_SETUP
+{
+ struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
+ BEGIN(PARAM);
+ current_pos.file = current_file;
+ current_pos.lineno = current_file->lineno;
+ if (id && id->flags & TF_COMMAND) {
+ zconflval.id = id;
+ return id->token;
+ }
+ alloc_string(zconftext, zconfleng);
+ zconflval.string = text;
+ return T_WORD;
+ }
+ YY_BREAK
+case 7:
+YY_RULE_SETUP
+
+ YY_BREAK
+case 8:
+/* rule 8 can match eol */
+YY_RULE_SETUP
+{
+ BEGIN(INITIAL);
+ current_file->lineno++;
+ return T_EOL;
+ }
+ YY_BREAK
+
+case 9:
+YY_RULE_SETUP
+return T_AND;
+ YY_BREAK
+case 10:
+YY_RULE_SETUP
+return T_OR;
+ YY_BREAK
+case 11:
+YY_RULE_SETUP
+return T_OPEN_PAREN;
+ YY_BREAK
+case 12:
+YY_RULE_SETUP
+return T_CLOSE_PAREN;
+ YY_BREAK
+case 13:
+YY_RULE_SETUP
+return T_NOT;
+ YY_BREAK
+case 14:
+YY_RULE_SETUP
+return T_EQUAL;
+ YY_BREAK
+case 15:
+YY_RULE_SETUP
+return T_UNEQUAL;
+ YY_BREAK
+case 16:
+YY_RULE_SETUP
+{
+ str = zconftext[0];
+ new_string();
+ BEGIN(STRING);
+ }
+ YY_BREAK
+case 17:
+/* rule 17 can match eol */
+YY_RULE_SETUP
+BEGIN(INITIAL); current_file->lineno++; return T_EOL;
+ YY_BREAK
+case 18:
+YY_RULE_SETUP
+/* ignore */
+ YY_BREAK
+case 19:
+YY_RULE_SETUP
+{
+ struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng);
+ if (id && id->flags & TF_PARAM) {
+ zconflval.id = id;
+ return id->token;
+ }
+ alloc_string(zconftext, zconfleng);
+ zconflval.string = text;
+ return T_WORD;
+ }
+ YY_BREAK
+case 20:
+YY_RULE_SETUP
+/* comment */
+ YY_BREAK
+case 21:
+/* rule 21 can match eol */
+YY_RULE_SETUP
+current_file->lineno++;
+ YY_BREAK
+case 22:
+YY_RULE_SETUP
+
+ YY_BREAK
+case YY_STATE_EOF(PARAM):
+{
+ BEGIN(INITIAL);
+ }
+ YY_BREAK
+
+case 23:
+/* rule 23 can match eol */
+*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
+(yy_c_buf_p) = yy_cp -= 1;
+YY_DO_BEFORE_ACTION; /* set up zconftext again */
+YY_RULE_SETUP
+{
+ append_string(zconftext, zconfleng);
+ zconflval.string = text;
+ return T_WORD_QUOTE;
+ }
+ YY_BREAK
+case 24:
+YY_RULE_SETUP
+{
+ append_string(zconftext, zconfleng);
+ }
+ YY_BREAK
+case 25:
+/* rule 25 can match eol */
+*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
+(yy_c_buf_p) = yy_cp -= 1;
+YY_DO_BEFORE_ACTION; /* set up zconftext again */
+YY_RULE_SETUP
+{
+ append_string(zconftext + 1, zconfleng - 1);
+ zconflval.string = text;
+ return T_WORD_QUOTE;
+ }
+ YY_BREAK
+case 26:
+YY_RULE_SETUP
+{
+ append_string(zconftext + 1, zconfleng - 1);
+ }
+ YY_BREAK
+case 27:
+YY_RULE_SETUP
+{
+ if (str == zconftext[0]) {
+ BEGIN(PARAM);
+ zconflval.string = text;
+ return T_WORD_QUOTE;
+ } else
+ append_string(zconftext, 1);
+ }
+ YY_BREAK
+case 28:
+/* rule 28 can match eol */
+YY_RULE_SETUP
+{
+ printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno());
+ current_file->lineno++;
+ BEGIN(INITIAL);
+ return T_EOL;
+ }
+ YY_BREAK
+case YY_STATE_EOF(STRING):
+{
+ BEGIN(INITIAL);
+ }
+ YY_BREAK
+
+case 29:
+YY_RULE_SETUP
+{
+ ts = 0;
+ for (i = 0; i < zconfleng; i++) {
+ if (zconftext[i] == '\t')
+ ts = (ts & ~7) + 8;
+ else
+ ts++;
+ }
+ last_ts = ts;
+ if (first_ts) {
+ if (ts < first_ts) {
+ zconf_endhelp();
+ return T_HELPTEXT;
+ }
+ ts -= first_ts;
+ while (ts > 8) {
+ append_string(" ", 8);
+ ts -= 8;
+ }
+ append_string(" ", ts);
+ }
+ }
+ YY_BREAK
+case 30:
+/* rule 30 can match eol */
+*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */
+(yy_c_buf_p) = yy_cp -= 1;
+YY_DO_BEFORE_ACTION; /* set up zconftext again */
+YY_RULE_SETUP
+{
+ current_file->lineno++;
+ zconf_endhelp();
+ return T_HELPTEXT;
+ }
+ YY_BREAK
+case 31:
+/* rule 31 can match eol */
+YY_RULE_SETUP
+{
+ current_file->lineno++;
+ append_string("\n", 1);
+ }
+ YY_BREAK
+case 32:
+YY_RULE_SETUP
+{
+ while (zconfleng) {
+ if ((zconftext[zconfleng-1] != ' ') && (zconftext[zconfleng-1] != '\t'))
+ break;
+ zconfleng--;
+ }
+ append_string(zconftext, zconfleng);
+ if (!first_ts)
+ first_ts = last_ts;
+ }
+ YY_BREAK
+case YY_STATE_EOF(HELP):
+{
+ zconf_endhelp();
+ return T_HELPTEXT;
+ }
+ YY_BREAK
+
+case YY_STATE_EOF(INITIAL):
+case YY_STATE_EOF(COMMAND):
+{
+ if (current_file) {
+ zconf_endfile();
+ return T_EOL;
+ }
+ fclose(zconfin);
+ yyterminate();
+}
+ YY_BREAK
+case 33:
+YY_RULE_SETUP
+YY_FATAL_ERROR( "flex scanner jammed" );
+ YY_BREAK
+
+ case YY_END_OF_BUFFER:
+ {
+ /* Amount of text matched not including the EOB char. */
+ int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
+
+ /* Undo the effects of YY_DO_BEFORE_ACTION. */
+ *yy_cp = (yy_hold_char);
+ YY_RESTORE_YY_MORE_OFFSET
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
+ {
+ /* We're scanning a new file or input source. It's
+ * possible that this happened because the user
+ * just pointed zconfin at a new source and called
+ * zconflex(). If so, then we have to assure
+ * consistency between YY_CURRENT_BUFFER and our
+ * globals. Here is the right place to do so, because
+ * this is the first action (other than possibly a
+ * back-up) that will match for the new input source.
+ */
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ YY_CURRENT_BUFFER_LVALUE->yy_input_file = zconfin;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
+ }
+
+ /* Note that here we test for yy_c_buf_p "<=" to the position
+ * of the first EOB in the buffer, since yy_c_buf_p will
+ * already have been incremented past the NUL character
+ * (since all states make transitions on EOB to the
+ * end-of-buffer state). Contrast this with the test
+ * in input().
+ */
+ if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ { /* This was really a NUL. */
+ yy_state_type yy_next_state;
+
+ (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ /* Okay, we're now positioned to make the NUL
+ * transition. We couldn't have
+ * yy_get_previous_state() go ahead and do it
+ * for us because it doesn't know how to deal
+ * with the possibility of jamming (and we don't
+ * want to build jamming into it because then it
+ * will run more slowly).
+ */
+
+ yy_next_state = yy_try_NUL_trans( yy_current_state );
+
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+
+ if ( yy_next_state )
+ {
+ /* Consume the NUL. */
+ yy_cp = ++(yy_c_buf_p);
+ yy_current_state = yy_next_state;
+ goto yy_match;
+ }
+
+ else
+ {
+ yy_cp = (yy_c_buf_p);
+ goto yy_find_action;
+ }
+ }
+
+ else switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_END_OF_FILE:
+ {
+ (yy_did_buffer_switch_on_eof) = 0;
+
+ if ( zconfwrap( ) )
+ {
+ /* Note: because we've taken care in
+ * yy_get_next_buffer() to have set up
+ * zconftext, we can now set up
+ * yy_c_buf_p so that if some total
+ * hoser (like flex itself) wants to
+ * call the scanner after we return the
+ * YY_NULL, it'll still work - another
+ * YY_NULL will get returned.
+ */
+ (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
+
+ yy_act = YY_STATE_EOF(YY_START);
+ goto do_action;
+ }
+
+ else
+ {
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+ }
+ break;
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) =
+ (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_match;
+
+ case EOB_ACT_LAST_MATCH:
+ (yy_c_buf_p) =
+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_find_action;
+ }
+ break;
+ }
+
+ default:
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--no action found" );
+ } /* end of action switch */
+ } /* end of scanning one token */
+} /* end of zconflex */
+
+/* yy_get_next_buffer - try to read in a new buffer
+ *
+ * Returns a code representing an action:
+ * EOB_ACT_LAST_MATCH -
+ * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
+ * EOB_ACT_END_OF_FILE - end of file
+ */
+static int yy_get_next_buffer (void)
+{
+ register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
+ register char *source = (yytext_ptr);
+ register int number_to_move, i;
+ int ret_val;
+
+ if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--end of buffer missed" );
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
+ { /* Don't try to fill the buffer, so this is an EOF. */
+ if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
+ {
+ /* We matched a single character, the EOB, so
+ * treat this as a final EOF.
+ */
+ return EOB_ACT_END_OF_FILE;
+ }
+
+ else
+ {
+ /* We matched some text prior to the EOB, first
+ * process it.
+ */
+ return EOB_ACT_LAST_MATCH;
+ }
+ }
+
+ /* Try to read more data. */
+
+ /* First move last chars to start of buffer. */
+ number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+
+ for ( i = 0; i < number_to_move; ++i )
+ *(dest++) = *(source++);
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
+ /* don't do the read, it's not guaranteed to return an EOF,
+ * just force an EOF
+ */
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
+
+ else
+ {
+ int num_to_read =
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
+
+ while ( num_to_read <= 0 )
+ { /* Not enough room in the buffer - grow it. */
+
+ /* just a shorter name for the current buffer */
+ YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
+
+ int yy_c_buf_p_offset =
+ (int) ((yy_c_buf_p) - b->yy_ch_buf);
+
+ if ( b->yy_is_our_buffer )
+ {
+ int new_size = b->yy_buf_size * 2;
+
+ if ( new_size <= 0 )
+ b->yy_buf_size += b->yy_buf_size / 8;
+ else
+ b->yy_buf_size *= 2;
+
+ b->yy_ch_buf = (char *)
+ /* Include room in for 2 EOB chars. */
+ zconfrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
+ }
+ else
+ /* Can't grow it, we don't own it. */
+ b->yy_ch_buf = 0;
+
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR(
+ "fatal error - scanner input buffer overflow" );
+
+ (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
+
+ num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
+ number_to_move - 1;
+
+ }
+
+ if ( num_to_read > YY_READ_BUF_SIZE )
+ num_to_read = YY_READ_BUF_SIZE;
+
+ /* Read in more data. */
+ YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
+ (yy_n_chars), num_to_read );
+
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ if ( (yy_n_chars) == 0 )
+ {
+ if ( number_to_move == YY_MORE_ADJ )
+ {
+ ret_val = EOB_ACT_END_OF_FILE;
+ zconfrestart(zconfin );
+ }
+
+ else
+ {
+ ret_val = EOB_ACT_LAST_MATCH;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
+ YY_BUFFER_EOF_PENDING;
+ }
+ }
+
+ else
+ ret_val = EOB_ACT_CONTINUE_SCAN;
+
+ (yy_n_chars) += number_to_move;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
+
+ (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
+
+ return ret_val;
+}
+
+/* yy_get_previous_state - get the state just before the EOB char was reached */
+
+ static yy_state_type yy_get_previous_state (void)
+{
+ register yy_state_type yy_current_state;
+ register char *yy_cp;
+
+ yy_current_state = (yy_start);
+
+ for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
+ {
+ yy_current_state = yy_nxt[yy_current_state][(*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1)];
+ }
+
+ return yy_current_state;
+}
+
+/* yy_try_NUL_trans - try to make a transition on the NUL character
+ *
+ * synopsis
+ * next_state = yy_try_NUL_trans( current_state );
+ */
+ static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
+{
+ register int yy_is_jam;
+
+ yy_current_state = yy_nxt[yy_current_state][1];
+ yy_is_jam = (yy_current_state <= 0);
+
+ return yy_is_jam ? 0 : yy_current_state;
+}
+
+ static void yyunput (int c, register char * yy_bp )
+{
+ register char *yy_cp;
+
+ yy_cp = (yy_c_buf_p);
+
+ /* undo effects of setting up zconftext */
+ *yy_cp = (yy_hold_char);
+
+ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
+ { /* need to shift things up to make room */
+ /* +2 for EOB chars. */
+ register int number_to_move = (yy_n_chars) + 2;
+ register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
+ register char *source =
+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
+
+ while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ *--dest = *--source;
+
+ yy_cp += (int) (dest - source);
+ yy_bp += (int) (dest - source);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
+
+ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
+ YY_FATAL_ERROR( "flex scanner push-back overflow" );
+ }
+
+ *--yy_cp = (char) c;
+
+ (yytext_ptr) = yy_bp;
+ (yy_hold_char) = *yy_cp;
+ (yy_c_buf_p) = yy_cp;
+}
+
+#ifndef YY_NO_INPUT
+#ifdef __cplusplus
+ static int yyinput (void)
+#else
+ static int input (void)
+#endif
+
+{
+ int c;
+
+ *(yy_c_buf_p) = (yy_hold_char);
+
+ if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
+ {
+ /* yy_c_buf_p now points to the character we want to return.
+ * If this occurs *before* the EOB characters, then it's a
+ * valid NUL; if not, then we've hit the end of the buffer.
+ */
+ if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ /* This was really a NUL. */
+ *(yy_c_buf_p) = '\0';
+
+ else
+ { /* need more input */
+ int offset = (yy_c_buf_p) - (yytext_ptr);
+ ++(yy_c_buf_p);
+
+ switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_LAST_MATCH:
+ /* This happens because yy_g_n_b()
+ * sees that we've accumulated a
+ * token and flags that we need to
+ * try matching the token before
+ * proceeding. But for input(),
+ * there's no matching to consider.
+ * So convert the EOB_ACT_LAST_MATCH
+ * to EOB_ACT_END_OF_FILE.
+ */
+
+ /* Reset buffer status. */
+ zconfrestart(zconfin );
+
+ /*FALLTHROUGH*/
+
+ case EOB_ACT_END_OF_FILE:
+ {
+ if ( zconfwrap( ) )
+ return EOF;
+
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+#ifdef __cplusplus
+ return yyinput();
+#else
+ return input();
+#endif
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) = (yytext_ptr) + offset;
+ break;
+ }
+ }
+ }
+
+ c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
+ *(yy_c_buf_p) = '\0'; /* preserve zconftext */
+ (yy_hold_char) = *++(yy_c_buf_p);
+
+ return c;
+}
+#endif /* ifndef YY_NO_INPUT */
+
+/** Immediately switch to a different input stream.
+ * @param input_file A readable stream.
+ *
+ * @note This function does not reset the start condition to @c INITIAL .
+ */
+ void zconfrestart (FILE * input_file )
+{
+
+ if ( ! YY_CURRENT_BUFFER ){
+ zconfensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ zconf_create_buffer(zconfin,YY_BUF_SIZE );
+ }
+
+ zconf_init_buffer(YY_CURRENT_BUFFER,input_file );
+ zconf_load_buffer_state( );
+}
+
+/** Switch to a different input buffer.
+ * @param new_buffer The new input buffer.
+ *
+ */
+ void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer )
+{
+
+ /* TODO. We should be able to replace this entire function body
+ * with
+ * zconfpop_buffer_state();
+ * zconfpush_buffer_state(new_buffer);
+ */
+ zconfensure_buffer_stack ();
+ if ( YY_CURRENT_BUFFER == new_buffer )
+ return;
+
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+ zconf_load_buffer_state( );
+
+ /* We don't actually know whether we did this switch during
+ * EOF (zconfwrap()) processing, but the only time this flag
+ * is looked at is after zconfwrap() is called, so it's safe
+ * to go ahead and always set it.
+ */
+ (yy_did_buffer_switch_on_eof) = 1;
+}
+
+static void zconf_load_buffer_state (void)
+{
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
+ zconfin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
+ (yy_hold_char) = *(yy_c_buf_p);
+}
+
+/** Allocate and initialize an input buffer state.
+ * @param file A readable stream.
+ * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
+ *
+ * @return the allocated buffer state.
+ */
+ YY_BUFFER_STATE zconf_create_buffer (FILE * file, int size )
+{
+ YY_BUFFER_STATE b;
+
+ b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
+
+ b->yy_buf_size = size;
+
+ /* yy_ch_buf has to be 2 characters longer than the size given because
+ * we need to put in 2 end-of-buffer characters.
+ */
+ b->yy_ch_buf = (char *) zconfalloc(b->yy_buf_size + 2 );
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" );
+
+ b->yy_is_our_buffer = 1;
+
+ zconf_init_buffer(b,file );
+
+ return b;
+}
+
+/** Destroy the buffer.
+ * @param b a buffer created with zconf_create_buffer()
+ *
+ */
+ void zconf_delete_buffer (YY_BUFFER_STATE b )
+{
+
+ if ( ! b )
+ return;
+
+ if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
+ YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
+
+ if ( b->yy_is_our_buffer )
+ zconffree((void *) b->yy_ch_buf );
+
+ zconffree((void *) b );
+}
+
+/* Initializes or reinitializes a buffer.
+ * This function is sometimes called more than once on the same buffer,
+ * such as during a zconfrestart() or at EOF.
+ */
+ static void zconf_init_buffer (YY_BUFFER_STATE b, FILE * file )
+
+{
+ int oerrno = errno;
+
+ zconf_flush_buffer(b );
+
+ b->yy_input_file = file;
+ b->yy_fill_buffer = 1;
+
+ /* If b is the current buffer, then zconf_init_buffer was _probably_
+ * called from zconfrestart() or through yy_get_next_buffer.
+ * In that case, we don't want to reset the lineno or column.
+ */
+ if (b != YY_CURRENT_BUFFER){
+ b->yy_bs_lineno = 1;
+ b->yy_bs_column = 0;
+ }
+
+ b->yy_is_interactive = 0;
+
+ errno = oerrno;
+}
+
+/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
+ * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
+ *
+ */
+ void zconf_flush_buffer (YY_BUFFER_STATE b )
+{
+ if ( ! b )
+ return;
+
+ b->yy_n_chars = 0;
+
+ /* We always need two end-of-buffer characters. The first causes
+ * a transition to the end-of-buffer state. The second causes
+ * a jam in that state.
+ */
+ b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
+ b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
+
+ b->yy_buf_pos = &b->yy_ch_buf[0];
+
+ b->yy_at_bol = 1;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ if ( b == YY_CURRENT_BUFFER )
+ zconf_load_buffer_state( );
+}
+
+/** Pushes the new state onto the stack. The new state becomes
+ * the current state. This function will allocate the stack
+ * if necessary.
+ * @param new_buffer The new state.
+ *
+ */
+void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer )
+{
+ if (new_buffer == NULL)
+ return;
+
+ zconfensure_buffer_stack();
+
+ /* This block is copied from zconf_switch_to_buffer. */
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ /* Only push if top exists. Otherwise, replace top. */
+ if (YY_CURRENT_BUFFER)
+ (yy_buffer_stack_top)++;
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+
+ /* copied from zconf_switch_to_buffer. */
+ zconf_load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+}
+
+/** Removes and deletes the top of the stack, if present.
+ * The next element becomes the new top.
+ *
+ */
+void zconfpop_buffer_state (void)
+{
+ if (!YY_CURRENT_BUFFER)
+ return;
+
+ zconf_delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ if ((yy_buffer_stack_top) > 0)
+ --(yy_buffer_stack_top);
+
+ if (YY_CURRENT_BUFFER) {
+ zconf_load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+ }
+}
+
+/* Allocates the stack if it does not exist.
+ * Guarantees space for at least one push.
+ */
+static void zconfensure_buffer_stack (void)
+{
+ int num_to_alloc;
+
+ if (!(yy_buffer_stack)) {
+
+ /* First allocation is just for 2 elements, since we don't know if this
+ * scanner will even need a stack. We use 2 instead of 1 to avoid an
+ * immediate realloc on the next call.
+ */
+ num_to_alloc = 1;
+ (yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc
+ (num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+
+ memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
+
+ (yy_buffer_stack_max) = num_to_alloc;
+ (yy_buffer_stack_top) = 0;
+ return;
+ }
+
+ if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
+
+ /* Increase the buffer to prepare for a possible push. */
+ int grow_size = 8 /* arbitrary grow size */;
+
+ num_to_alloc = (yy_buffer_stack_max) + grow_size;
+ (yy_buffer_stack) = (struct yy_buffer_state**)zconfrealloc
+ ((yy_buffer_stack),
+ num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+
+ /* zero only the new slots.*/
+ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
+ (yy_buffer_stack_max) = num_to_alloc;
+ }
+}
+
+/** Setup the input buffer state to scan directly from a user-specified character buffer.
+ * @param base the character buffer
+ * @param size the size in bytes of the character buffer
+ *
+ * @return the newly allocated buffer state object.
+ */
+YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size )
+{
+ YY_BUFFER_STATE b;
+
+ if ( size < 2 ||
+ base[size-2] != YY_END_OF_BUFFER_CHAR ||
+ base[size-1] != YY_END_OF_BUFFER_CHAR )
+ /* They forgot to leave room for the EOB's. */
+ return 0;
+
+ b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_buffer()" );
+
+ b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
+ b->yy_buf_pos = b->yy_ch_buf = base;
+ b->yy_is_our_buffer = 0;
+ b->yy_input_file = 0;
+ b->yy_n_chars = b->yy_buf_size;
+ b->yy_is_interactive = 0;
+ b->yy_at_bol = 1;
+ b->yy_fill_buffer = 0;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ zconf_switch_to_buffer(b );
+
+ return b;
+}
+
+/** Setup the input buffer state to scan a string. The next call to zconflex() will
+ * scan from a @e copy of @a str.
+ * @param str a NUL-terminated string to scan
+ *
+ * @return the newly allocated buffer state object.
+ * @note If you want to scan bytes that may contain NUL values, then use
+ * zconf_scan_bytes() instead.
+ */
+YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr )
+{
+
+ return zconf_scan_bytes(yystr,strlen(yystr) );
+}
+
+/** Setup the input buffer state to scan the given bytes. The next call to zconflex() will
+ * scan from a @e copy of @a bytes.
+ * @param bytes the byte buffer to scan
+ * @param len the number of bytes in the buffer pointed to by @a bytes.
+ *
+ * @return the newly allocated buffer state object.
+ */
+YY_BUFFER_STATE zconf_scan_bytes (yyconst char * yybytes, int _yybytes_len )
+{
+ YY_BUFFER_STATE b;
+ char *buf;
+ yy_size_t n;
+ int i;
+
+ /* Get memory for full buffer, including space for trailing EOB's. */
+ n = _yybytes_len + 2;
+ buf = (char *) zconfalloc(n );
+ if ( ! buf )
+ YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_bytes()" );
+
+ for ( i = 0; i < _yybytes_len; ++i )
+ buf[i] = yybytes[i];
+
+ buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
+
+ b = zconf_scan_buffer(buf,n );
+ if ( ! b )
+ YY_FATAL_ERROR( "bad buffer in zconf_scan_bytes()" );
+
+ /* It's okay to grow etc. this buffer, and we should throw it
+ * away when we're done.
+ */
+ b->yy_is_our_buffer = 1;
+
+ return b;
+}
+
+#ifndef YY_EXIT_FAILURE
+#define YY_EXIT_FAILURE 2
+#endif
+
+static void yy_fatal_error (yyconst char* msg )
+{
+ (void) fprintf( stderr, "%s\n", msg );
+ exit( YY_EXIT_FAILURE );
+}
+
+/* Redefine yyless() so it works in section 3 code. */
+
+#undef yyless
+#define yyless(n) \
+ do \
+ { \
+ /* Undo effects of setting up zconftext. */ \
+ int yyless_macro_arg = (n); \
+ YY_LESS_LINENO(yyless_macro_arg);\
+ zconftext[zconfleng] = (yy_hold_char); \
+ (yy_c_buf_p) = zconftext + yyless_macro_arg; \
+ (yy_hold_char) = *(yy_c_buf_p); \
+ *(yy_c_buf_p) = '\0'; \
+ zconfleng = yyless_macro_arg; \
+ } \
+ while ( 0 )
+
+/* Accessor methods (get/set functions) to struct members. */
+
+/** Get the current line number.
+ *
+ */
+int zconfget_lineno (void)
+{
+
+ return zconflineno;
+}
+
+/** Get the input stream.
+ *
+ */
+FILE *zconfget_in (void)
+{
+ return zconfin;
+}
+
+/** Get the output stream.
+ *
+ */
+FILE *zconfget_out (void)
+{
+ return zconfout;
+}
+
+/** Get the length of the current token.
+ *
+ */
+int zconfget_leng (void)
+{
+ return zconfleng;
+}
+
+/** Get the current token.
+ *
+ */
+
+char *zconfget_text (void)
+{
+ return zconftext;
+}
+
+/** Set the current line number.
+ * @param line_number
+ *
+ */
+void zconfset_lineno (int line_number )
+{
+
+ zconflineno = line_number;
+}
+
+/** Set the input stream. This does not discard the current
+ * input buffer.
+ * @param in_str A readable stream.
+ *
+ * @see zconf_switch_to_buffer
+ */
+void zconfset_in (FILE * in_str )
+{
+ zconfin = in_str ;
+}
+
+void zconfset_out (FILE * out_str )
+{
+ zconfout = out_str ;
+}
+
+int zconfget_debug (void)
+{
+ return zconf_flex_debug;
+}
+
+void zconfset_debug (int bdebug )
+{
+ zconf_flex_debug = bdebug ;
+}
+
+static int yy_init_globals (void)
+{
+ /* Initialization is the same as for the non-reentrant scanner.
+ * This function is called from zconflex_destroy(), so don't allocate here.
+ */
+
+ (yy_buffer_stack) = 0;
+ (yy_buffer_stack_top) = 0;
+ (yy_buffer_stack_max) = 0;
+ (yy_c_buf_p) = (char *) 0;
+ (yy_init) = 0;
+ (yy_start) = 0;
+
+/* Defined in main.c */
+#ifdef YY_STDINIT
+ zconfin = stdin;
+ zconfout = stdout;
+#else
+ zconfin = (FILE *) 0;
+ zconfout = (FILE *) 0;
+#endif
+
+ /* For future reference: Set errno on error, since we are called by
+ * zconflex_init()
+ */
+ return 0;
+}
+
+/* zconflex_destroy is for both reentrant and non-reentrant scanners. */
+int zconflex_destroy (void)
+{
+
+ /* Pop the buffer stack, destroying each element. */
+ while(YY_CURRENT_BUFFER){
+ zconf_delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ zconfpop_buffer_state();
+ }
+
+ /* Destroy the stack itself. */
+ zconffree((yy_buffer_stack) );
+ (yy_buffer_stack) = NULL;
+
+ /* Reset the globals. This is important in a non-reentrant scanner so the next time
+ * zconflex() is called, initialization will occur. */
+ yy_init_globals( );
+
+ return 0;
+}
+
+/*
+ * Internal utility routines.
+ */
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
+{
+ register int i;
+ for ( i = 0; i < n; ++i )
+ s1[i] = s2[i];
+}
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * s )
+{
+ register int n;
+ for ( n = 0; s[n]; ++n )
+ ;
+
+ return n;
+}
+#endif
+
+void *zconfalloc (yy_size_t size )
+{
+ return (void *) malloc( size );
+}
+
+void *zconfrealloc (void * ptr, yy_size_t size )
+{
+ /* The cast to (char *) in the following accommodates both
+ * implementations that use char* generic pointers, and those
+ * that use void* generic pointers. It works with the latter
+ * because both ANSI C and C++ allow castless assignment from
+ * any pointer type to void*, and deal with argument conversions
+ * as though doing an assignment.
+ */
+ return (void *) realloc( (char *) ptr, size );
+}
+
+void zconffree (void * ptr )
+{
+ free( (char *) ptr ); /* see zconfrealloc() for (char *) cast */
+}
+
+#define YYTABLES_NAME "yytables"
+
+void zconf_starthelp(void)
+{
+ new_string();
+ last_ts = first_ts = 0;
+ BEGIN(HELP);
+}
+
+static void zconf_endhelp(void)
+{
+ zconflval.string = text;
+ BEGIN(INITIAL);
+}
+
+/*
+ * Try to open specified file with following names:
+ * ./name
+ * $(srctree)/name
+ * The latter is used when srctree is separate from objtree
+ * when compiling the kernel.
+ * Return NULL if file is not found.
+ */
+FILE *zconf_fopen(const char *name)
+{
+ char *env, fullname[PATH_MAX+1];
+ FILE *f;
+
+ f = fopen(name, "r");
+ if (!f && name != NULL && name[0] != '/') {
+ env = getenv(SRCTREE);
+ if (env) {
+ sprintf(fullname, "%s/%s", env, name);
+ f = fopen(fullname, "r");
+ }
+ }
+ return f;
+}
+
+void zconf_initscan(const char *name)
+{
+ zconfin = zconf_fopen(name);
+ if (!zconfin) {
+ printf("can't find file %s\n", name);
+ exit(1);
+ }
+
+ current_buf = malloc(sizeof(*current_buf));
+ memset(current_buf, 0, sizeof(*current_buf));
+
+ current_file = file_lookup(name);
+ current_file->lineno = 1;
+ current_file->flags = FILE_BUSY;
+}
+
+void zconf_nextfile(const char *name)
+{
+ struct file *file = file_lookup(name);
+ struct buffer *buf = malloc(sizeof(*buf));
+ memset(buf, 0, sizeof(*buf));
+
+ current_buf->state = YY_CURRENT_BUFFER;
+ zconfin = zconf_fopen(name);
+ if (!zconfin) {
+ printf("%s:%d: can't open file \"%s\"\n", zconf_curname(), zconf_lineno(), name);
+ exit(1);
+ }
+ zconf_switch_to_buffer(zconf_create_buffer(zconfin,YY_BUF_SIZE));
+ buf->parent = current_buf;
+ current_buf = buf;
+
+ if (file->flags & FILE_BUSY) {
+ printf("recursive scan (%s)?\n", name);
+ exit(1);
+ }
+ if (file->flags & FILE_SCANNED) {
+ printf("file %s already scanned?\n", name);
+ exit(1);
+ }
+ file->flags |= FILE_BUSY;
+ file->lineno = 1;
+ file->parent = current_file;
+ current_file = file;
+}
+
+static void zconf_endfile(void)
+{
+ struct buffer *parent;
+
+ current_file->flags |= FILE_SCANNED;
+ current_file->flags &= ~FILE_BUSY;
+ current_file = current_file->parent;
+
+ parent = current_buf->parent;
+ if (parent) {
+ fclose(zconfin);
+ zconf_delete_buffer(YY_CURRENT_BUFFER);
+ zconf_switch_to_buffer(parent->state);
+ }
+ free(current_buf);
+ current_buf = parent;
+}
+
+int zconf_lineno(void)
+{
+ return current_pos.lineno;
+}
+
+char *zconf_curname(void)
+{
+ return current_pos.file ? current_pos.file->name : "<none>";
+}
+
diff --git a/util/kconfig/lkc.h b/util/kconfig/lkc.h
new file mode 100644
index 0000000..bae6635
--- /dev/null
+++ b/util/kconfig/lkc.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#ifndef LKC_H
+#define LKC_H
+
+#include "expr.h"
+
+#ifndef KBUILD_NO_NLS
+# include <libintl.h>
+#else
+# define gettext(Msgid) ((const char *) (Msgid))
+# define textdomain(Domainname) ((const char *) (Domainname))
+# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef LKC_DIRECT_LINK
+#define P(name,type,arg) extern type name arg
+#else
+#include "lkc_defs.h"
+#define P(name,type,arg) extern type (*name ## _p) arg
+#endif
+#include "lkc_proto.h"
+#undef P
+
+#define SRCTREE "src"
+
+#define PACKAGE "coreboot"
+#define LOCALEDIR "/usr/share/locale"
+
+#define _(text) gettext(text)
+#define N_(text) (text)
+
+
+#define TF_COMMAND 0x0001
+#define TF_PARAM 0x0002
+#define TF_OPTION 0x0004
+
+#define T_OPT_MODULES 1
+#define T_OPT_DEFCONFIG_LIST 2
+#define T_OPT_ENV 3
+
+struct kconf_id {
+ int name;
+ int token;
+ unsigned int flags;
+ enum symbol_type stype;
+};
+
+int zconfparse(void);
+void zconfdump(FILE *out);
+
+extern int zconfdebug;
+void zconf_starthelp(void);
+FILE *zconf_fopen(const char *name);
+void zconf_initscan(const char *name);
+void zconf_nextfile(const char *name);
+int zconf_lineno(void);
+char *zconf_curname(void);
+
+/* confdata.c */
+const char *conf_get_configname(void);
+char *conf_get_default_confname(void);
+void sym_set_change_count(int count);
+void sym_add_change_count(int count);
+
+/* kconfig_load.c */
+void kconfig_load(void);
+
+/* menu.c */
+void menu_init(void);
+void menu_warn(struct menu *menu, const char *fmt, ...);
+struct menu *menu_add_menu(void);
+void menu_end_menu(void);
+void menu_add_entry(struct symbol *sym);
+void menu_end_entry(void);
+void menu_add_dep(struct expr *dep);
+struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep);
+struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
+void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep);
+void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep);
+void menu_add_option(int token, char *arg);
+void menu_finalize(struct menu *parent);
+void menu_set_type(int type);
+
+/* util.c */
+struct file *file_lookup(const char *name);
+int file_write_dep(const char *name);
+
+struct gstr {
+ size_t len;
+ char *s;
+};
+struct gstr str_new(void);
+struct gstr str_assign(const char *s);
+void str_free(struct gstr *gs);
+void str_append(struct gstr *gs, const char *s);
+void str_printf(struct gstr *gs, const char *fmt, ...);
+const char *str_get(struct gstr *gs);
+
+/* symbol.c */
+extern struct expr *sym_env_list;
+
+void sym_init(void);
+void sym_clear_all_valid(void);
+void sym_set_all_changed(void);
+void sym_set_changed(struct symbol *sym);
+struct symbol *sym_check_deps(struct symbol *sym);
+struct property *prop_alloc(enum prop_type type, struct symbol *sym);
+struct symbol *prop_get_symbol(struct property *prop);
+struct property *sym_get_env_prop(struct symbol *sym);
+
+static inline tristate sym_get_tristate_value(struct symbol *sym)
+{
+ return sym->curr.tri;
+}
+
+
+static inline struct symbol *sym_get_choice_value(struct symbol *sym)
+{
+ return (struct symbol *)sym->curr.val;
+}
+
+static inline bool sym_set_choice_value(struct symbol *ch, struct symbol *chval)
+{
+ return sym_set_tristate_value(chval, yes);
+}
+
+static inline bool sym_is_choice(struct symbol *sym)
+{
+ return sym->flags & SYMBOL_CHOICE ? true : false;
+}
+
+static inline bool sym_is_choice_value(struct symbol *sym)
+{
+ return sym->flags & SYMBOL_CHOICEVAL ? true : false;
+}
+
+static inline bool sym_is_optional(struct symbol *sym)
+{
+ return sym->flags & SYMBOL_OPTIONAL ? true : false;
+}
+
+static inline bool sym_has_value(struct symbol *sym)
+{
+ return sym->flags & SYMBOL_DEF_USER ? true : false;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* LKC_H */
diff --git a/util/kconfig/lkc_proto.h b/util/kconfig/lkc_proto.h
new file mode 100644
index 0000000..4d09f6d
--- /dev/null
+++ b/util/kconfig/lkc_proto.h
@@ -0,0 +1,45 @@
+
+/* confdata.c */
+P(conf_parse,void,(const char *name));
+P(conf_read,int,(const char *name));
+P(conf_read_simple,int,(const char *name, int));
+P(conf_write,int,(const char *name));
+P(conf_write_autoconf,int,(void));
+P(conf_get_changed,bool,(void));
+P(conf_set_changed_callback, void,(void (*fn)(void)));
+
+/* menu.c */
+P(rootmenu,struct menu,);
+
+P(menu_is_visible,bool,(struct menu *menu));
+P(menu_get_prompt,const char *,(struct menu *menu));
+P(menu_get_root_menu,struct menu *,(struct menu *menu));
+P(menu_get_parent_menu,struct menu *,(struct menu *menu));
+P(menu_has_help,bool,(struct menu *menu));
+P(menu_get_help,const char *,(struct menu *menu));
+
+/* symbol.c */
+P(symbol_hash,struct symbol *,[SYMBOL_HASHSIZE]);
+
+P(sym_lookup,struct symbol *,(const char *name, int isconst));
+P(sym_find,struct symbol *,(const char *name));
+P(sym_re_search,struct symbol **,(const char *pattern));
+P(sym_type_name,const char *,(enum symbol_type type));
+P(sym_calc_value,void,(struct symbol *sym));
+P(sym_get_type,enum symbol_type,(struct symbol *sym));
+P(sym_tristate_within_range,bool,(struct symbol *sym,tristate tri));
+P(sym_set_tristate_value,bool,(struct symbol *sym,tristate tri));
+P(sym_toggle_tristate_value,tristate,(struct symbol *sym));
+P(sym_string_valid,bool,(struct symbol *sym, const char *newval));
+P(sym_string_within_range,bool,(struct symbol *sym, const char *str));
+P(sym_set_string_value,bool,(struct symbol *sym, const char *newval));
+P(sym_is_changable,bool,(struct symbol *sym));
+P(sym_get_choice_prop,struct property *,(struct symbol *sym));
+P(sym_get_default_prop,struct property *,(struct symbol *sym));
+P(sym_get_string_value,const char *,(struct symbol *sym));
+
+P(prop_get_type_name,const char *,(enum prop_type type));
+
+/* expr.c */
+P(expr_compare_type,int,(enum expr_type t1, enum expr_type t2));
+P(expr_print,void,(struct expr *e, void (*fn)(void *, struct symbol *, const char *), void *data, int prevtoken));
diff --git a/util/kconfig/lxdialog/BIG.FAT.WARNING b/util/kconfig/lxdialog/BIG.FAT.WARNING
new file mode 100644
index 0000000..a8999d8
--- /dev/null
+++ b/util/kconfig/lxdialog/BIG.FAT.WARNING
@@ -0,0 +1,4 @@
+This is NOT the official version of dialog. This version has been
+significantly modified from the original. It is for use by the Linux
+kernel configuration script. Please do not bother Savio Lam with
+questions about this program.
diff --git a/util/kconfig/lxdialog/check-lxdialog.sh b/util/kconfig/lxdialog/check-lxdialog.sh
new file mode 100644
index 0000000..751e99d
--- /dev/null
+++ b/util/kconfig/lxdialog/check-lxdialog.sh
@@ -0,0 +1,80 @@
+#!/bin/sh
+# Check ncurses compatibility
+
+# What library to link
+ldflags()
+{
+ for ext in so a dylib ; do
+ for lib in ncursesw ncurses curses ; do
+ $cc -print-file-name=lib${lib}.${ext} | grep / >/dev/null
+ if [ $? -eq 0 ]; then
+ echo "-l${lib}"
+ exit
+ fi
+ done
+ done
+ exit 1
+}
+
+# Where is ncurses.h?
+ccflags()
+{
+ if [ -f /usr/include/ncurses/ncurses.h ]; then
+ echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"'
+ elif [ -f /usr/include/ncurses/curses.h ]; then
+ echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses/curses.h>"'
+ elif [ -f /usr/include/ncurses.h ]; then
+ echo '-DCURSES_LOC="<ncurses.h>"'
+ else
+ echo '-DCURSES_LOC="<curses.h>"'
+ fi
+}
+
+# Temp file, try to clean up after us
+tmp=.lxdialog.tmp
+trap "rm -f $tmp" 0 1 2 3 15
+
+# Check if we can link to ncurses
+check() {
+ echo -e " #include CURSES_LOC \n main() {}" |
+ $cc -xc - -o $tmp 2> /dev/null
+ if [ $? != 0 ]; then
+ echo " *** Unable to find the ncurses libraries or the" 1>&2
+ echo " *** required header files." 1>&2
+ echo " *** 'make menuconfig' requires the ncurses libraries." 1>&2
+ echo " *** " 1>&2
+ echo " *** Install ncurses (ncurses-devel) and try again." 1>&2
+ echo " *** " 1>&2
+ exit 1
+ fi
+}
+
+usage() {
+ printf "Usage: $0 [-check compiler options|-header|-library]\n"
+}
+
+if [ $# -eq 0 ]; then
+ usage
+ exit 1
+fi
+
+cc=""
+case "$1" in
+ "-check")
+ shift
+ cc="$@"
+ check
+ ;;
+ "-ccflags")
+ ccflags
+ ;;
+ "-ldflags")
+ shift
+ cc="$@"
+ ldflags
+ ;;
+ "*")
+ usage
+ exit 1
+ ;;
+esac
diff --git a/util/kconfig/lxdialog/checklist.c b/util/kconfig/lxdialog/checklist.c
new file mode 100644
index 0000000..eafd53a
--- /dev/null
+++ b/util/kconfig/lxdialog/checklist.c
@@ -0,0 +1,327 @@
+/*
+ * checklist.c -- implements the checklist box
+ *
+ * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ * Stuart Herbert - S.Herbert@sheffield.ac.uk: radiolist extension
+ * Alessandro Rubini - rubini@ipvvis.unipv.it: merged the two
+ * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dialog.h"
+
+static int list_width, check_x, item_x;
+
+/*
+ * Print list item
+ */
+static void print_item(WINDOW * win, int choice, int selected)
+{
+ int i;
+
+ /* Clear 'residue' of last item */
+ wattrset(win, dlg.menubox.atr);
+ wmove(win, choice, 0);
+ for (i = 0; i < list_width; i++)
+ waddch(win, ' ');
+
+ wmove(win, choice, check_x);
+ wattrset(win, selected ? dlg.check_selected.atr
+ : dlg.check.atr);
+ wprintw(win, "(%c)", item_is_tag('X') ? 'X' : ' ');
+
+ wattrset(win, selected ? dlg.tag_selected.atr : dlg.tag.atr);
+ mvwaddch(win, choice, item_x, item_str()[0]);
+ wattrset(win, selected ? dlg.item_selected.atr : dlg.item.atr);
+ waddstr(win, (char *)item_str() + 1);
+ if (selected) {
+ wmove(win, choice, check_x + 1);
+ wrefresh(win);
+ }
+}
+
+/*
+ * Print the scroll indicators.
+ */
+static void print_arrows(WINDOW * win, int choice, int item_no, int scroll,
+ int y, int x, int height)
+{
+ wmove(win, y, x);
+
+ if (scroll > 0) {
+ wattrset(win, dlg.uarrow.atr);
+ waddch(win, ACS_UARROW);
+ waddstr(win, "(-)");
+ } else {
+ wattrset(win, dlg.menubox.atr);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ }
+
+ y = y + height + 1;
+ wmove(win, y, x);
+
+ if ((height < item_no) && (scroll + choice < item_no - 1)) {
+ wattrset(win, dlg.darrow.atr);
+ waddch(win, ACS_DARROW);
+ waddstr(win, "(+)");
+ } else {
+ wattrset(win, dlg.menubox_border.atr);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ }
+}
+
+/*
+ * Display the termination buttons
+ */
+static void print_buttons(WINDOW * dialog, int height, int width, int selected)
+{
+ int x = width / 2 - 11;
+ int y = height - 2;
+
+ print_button(dialog, gettext("Select"), y, x, selected == 0);
+ print_button(dialog, gettext(" Help "), y, x + 14, selected == 1);
+
+ wmove(dialog, y, x + 1 + 14 * selected);
+ wrefresh(dialog);
+}
+
+/*
+ * Display a dialog box with a list of options that can be turned on or off
+ * in the style of radiolist (only one option turned on at a time).
+ */
+int dialog_checklist(const char *title, const char *prompt, int height,
+ int width, int list_height)
+{
+ int i, x, y, box_x, box_y;
+ int key = 0, button = 0, choice = 0, scroll = 0, max_choice;
+ WINDOW *dialog, *list;
+
+ /* which item to highlight */
+ item_foreach() {
+ if (item_is_tag('X'))
+ choice = item_n();
+ if (item_is_selected()) {
+ choice = item_n();
+ break;
+ }
+ }
+
+do_resize:
+ if (getmaxy(stdscr) < (height + 6))
+ return -ERRDISPLAYTOOSMALL;
+ if (getmaxx(stdscr) < (width + 6))
+ return -ERRDISPLAYTOOSMALL;
+
+ max_choice = MIN(list_height, item_count());
+
+ /* center dialog box on screen */
+ x = (COLS - width) / 2;
+ y = (LINES - height) / 2;
+
+ draw_shadow(stdscr, y, x, height, width);
+
+ dialog = newwin(height, width, y, x);
+ keypad(dialog, TRUE);
+
+ draw_box(dialog, 0, 0, height, width,
+ dlg.dialog.atr, dlg.border.atr);
+ wattrset(dialog, dlg.border.atr);
+ mvwaddch(dialog, height - 3, 0, ACS_LTEE);
+ for (i = 0; i < width - 2; i++)
+ waddch(dialog, ACS_HLINE);
+ wattrset(dialog, dlg.dialog.atr);
+ waddch(dialog, ACS_RTEE);
+
+ print_title(dialog, title, width);
+
+ wattrset(dialog, dlg.dialog.atr);
+ print_autowrap(dialog, prompt, width - 2, 1, 3);
+
+ list_width = width - 6;
+ box_y = height - list_height - 5;
+ box_x = (width - list_width) / 2 - 1;
+
+ /* create new window for the list */
+ list = subwin(dialog, list_height, list_width, y + box_y + 1,
+ x + box_x + 1);
+
+ keypad(list, TRUE);
+
+ /* draw a box around the list items */
+ draw_box(dialog, box_y, box_x, list_height + 2, list_width + 2,
+ dlg.menubox_border.atr, dlg.menubox.atr);
+
+ /* Find length of longest item in order to center checklist */
+ check_x = 0;
+ item_foreach()
+ check_x = MAX(check_x, strlen(item_str()) + 4);
+
+ check_x = (list_width - check_x) / 2;
+ item_x = check_x + 4;
+
+ if (choice >= list_height) {
+ scroll = choice - list_height + 1;
+ choice -= scroll;
+ }
+
+ /* Print the list */
+ for (i = 0; i < max_choice; i++) {
+ item_set(scroll + i);
+ print_item(list, i, i == choice);
+ }
+
+ print_arrows(dialog, choice, item_count(), scroll,
+ box_y, box_x + check_x + 5, list_height);
+
+ print_buttons(dialog, height, width, 0);
+
+ wnoutrefresh(dialog);
+ wnoutrefresh(list);
+ doupdate();
+
+ while (key != KEY_ESC) {
+ key = wgetch(dialog);
+
+ for (i = 0; i < max_choice; i++) {
+ item_set(i + scroll);
+ if (toupper(key) == toupper(item_str()[0]))
+ break;
+ }
+
+ if (i < max_choice || key == KEY_UP || key == KEY_DOWN ||
+ key == '+' || key == '-') {
+ if (key == KEY_UP || key == '-') {
+ if (!choice) {
+ if (!scroll)
+ continue;
+ /* Scroll list down */
+ if (list_height > 1) {
+ /* De-highlight current first item */
+ item_set(scroll);
+ print_item(list, 0, FALSE);
+ scrollok(list, TRUE);
+ wscrl(list, -1);
+ scrollok(list, FALSE);
+ }
+ scroll--;
+ item_set(scroll);
+ print_item(list, 0, TRUE);
+ print_arrows(dialog, choice, item_count(),
+ scroll, box_y, box_x + check_x + 5, list_height);
+
+ wnoutrefresh(dialog);
+ wrefresh(list);
+
+ continue; /* wait for another key press */
+ } else
+ i = choice - 1;
+ } else if (key == KEY_DOWN || key == '+') {
+ if (choice == max_choice - 1) {
+ if (scroll + choice >= item_count() - 1)
+ continue;
+ /* Scroll list up */
+ if (list_height > 1) {
+ /* De-highlight current last item before scrolling up */
+ item_set(scroll + max_choice - 1);
+ print_item(list,
+ max_choice - 1,
+ FALSE);
+ scrollok(list, TRUE);
+ wscrl(list, 1);
+ scrollok(list, FALSE);
+ }
+ scroll++;
+ item_set(scroll + max_choice - 1);
+ print_item(list, max_choice - 1, TRUE);
+
+ print_arrows(dialog, choice, item_count(),
+ scroll, box_y, box_x + check_x + 5, list_height);
+
+ wnoutrefresh(dialog);
+ wrefresh(list);
+
+ continue; /* wait for another key press */
+ } else
+ i = choice + 1;
+ }
+ if (i != choice) {
+ /* De-highlight current item */
+ item_set(scroll + choice);
+ print_item(list, choice, FALSE);
+ /* Highlight new item */
+ choice = i;
+ item_set(scroll + choice);
+ print_item(list, choice, TRUE);
+ wnoutrefresh(dialog);
+ wrefresh(list);
+ }
+ continue; /* wait for another key press */
+ }
+ switch (key) {
+ case 'H':
+ case 'h':
+ case '?':
+ button = 1;
+ /* fall-through */
+ case 'S':
+ case 's':
+ case ' ':
+ case '\n':
+ item_foreach()
+ item_set_selected(0);
+ item_set(scroll + choice);
+ item_set_selected(1);
+ delwin(list);
+ delwin(dialog);
+ return button;
+ case TAB:
+ case KEY_LEFT:
+ case KEY_RIGHT:
+ button = ((key == KEY_LEFT ? --button : ++button) < 0)
+ ? 1 : (button > 1 ? 0 : button);
+
+ print_buttons(dialog, height, width, button);
+ wrefresh(dialog);
+ break;
+ case 'X':
+ case 'x':
+ key = KEY_ESC;
+ break;
+ case KEY_ESC:
+ key = on_key_esc(dialog);
+ break;
+#ifdef NCURSES_VERSION
+ case KEY_RESIZE:
+ delwin(list);
+ delwin(dialog);
+ on_key_resize();
+ goto do_resize;
+#endif
+ }
+
+ /* Now, update everything... */
+ doupdate();
+ }
+ delwin(list);
+ delwin(dialog);
+ return key; /* ESC pressed */
+}
diff --git a/util/kconfig/lxdialog/dialog.h b/util/kconfig/lxdialog/dialog.h
new file mode 100644
index 0000000..b5211fc
--- /dev/null
+++ b/util/kconfig/lxdialog/dialog.h
@@ -0,0 +1,230 @@
+/*
+ * dialog.h -- common declarations for all dialog modules
+ *
+ * AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <ctype.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdbool.h>
+
+#ifndef KBUILD_NO_NLS
+# include <libintl.h>
+#else
+# define gettext(Msgid) ((const char *) (Msgid))
+#endif
+
+#ifdef __sun__
+#define CURS_MACROS
+#endif
+#include CURSES_LOC
+
+/*
+ * Colors in ncurses 1.9.9e do not work properly since foreground and
+ * background colors are OR'd rather than separately masked. This version
+ * of dialog was hacked to work with ncurses 1.9.9e, making it incompatible
+ * with standard curses. The simplest fix (to make this work with standard
+ * curses) uses the wbkgdset() function, not used in the original hack.
+ * Turn it off if we're building with 1.9.9e, since it just confuses things.
+ */
+#if defined(NCURSES_VERSION) && defined(_NEED_WRAP) && !defined(GCC_PRINTFLIKE)
+#define OLD_NCURSES 1
+#undef wbkgdset
+#define wbkgdset(w,p) /*nothing */
+#else
+#define OLD_NCURSES 0
+#endif
+
+#define TR(params) _tracef params
+
+#define KEY_ESC 27
+#define TAB 9
+#define MAX_LEN 2048
+#define BUF_SIZE (10*1024)
+#define MIN(x,y) (x < y ? x : y)
+#define MAX(x,y) (x > y ? x : y)
+
+#ifndef ACS_ULCORNER
+#define ACS_ULCORNER '+'
+#endif
+#ifndef ACS_LLCORNER
+#define ACS_LLCORNER '+'
+#endif
+#ifndef ACS_URCORNER
+#define ACS_URCORNER '+'
+#endif
+#ifndef ACS_LRCORNER
+#define ACS_LRCORNER '+'
+#endif
+#ifndef ACS_HLINE
+#define ACS_HLINE '-'
+#endif
+#ifndef ACS_VLINE
+#define ACS_VLINE '|'
+#endif
+#ifndef ACS_LTEE
+#define ACS_LTEE '+'
+#endif
+#ifndef ACS_RTEE
+#define ACS_RTEE '+'
+#endif
+#ifndef ACS_UARROW
+#define ACS_UARROW '^'
+#endif
+#ifndef ACS_DARROW
+#define ACS_DARROW 'v'
+#endif
+
+/* error return codes */
+#define ERRDISPLAYTOOSMALL (KEY_MAX + 1)
+
+/*
+ * Color definitions
+ */
+struct dialog_color {
+ chtype atr; /* Color attribute */
+ int fg; /* foreground */
+ int bg; /* background */
+ int hl; /* highlight this item */
+};
+
+struct dialog_info {
+ const char *backtitle;
+ struct dialog_color screen;
+ struct dialog_color shadow;
+ struct dialog_color dialog;
+ struct dialog_color title;
+ struct dialog_color border;
+ struct dialog_color button_active;
+ struct dialog_color button_inactive;
+ struct dialog_color button_key_active;
+ struct dialog_color button_key_inactive;
+ struct dialog_color button_label_active;
+ struct dialog_color button_label_inactive;
+ struct dialog_color inputbox;
+ struct dialog_color inputbox_border;
+ struct dialog_color searchbox;
+ struct dialog_color searchbox_title;
+ struct dialog_color searchbox_border;
+ struct dialog_color position_indicator;
+ struct dialog_color menubox;
+ struct dialog_color menubox_border;
+ struct dialog_color item;
+ struct dialog_color item_selected;
+ struct dialog_color tag;
+ struct dialog_color tag_selected;
+ struct dialog_color tag_key;
+ struct dialog_color tag_key_selected;
+ struct dialog_color check;
+ struct dialog_color check_selected;
+ struct dialog_color uarrow;
+ struct dialog_color darrow;
+};
+
+/*
+ * Global variables
+ */
+extern struct dialog_info dlg;
+extern char dialog_input_result[];
+
+/*
+ * Function prototypes
+ */
+
+/* item list as used by checklist and menubox */
+void item_reset(void);
+void item_make(const char *fmt, ...);
+void item_add_str(const char *fmt, ...);
+void item_set_tag(char tag);
+void item_set_data(void *p);
+void item_set_selected(int val);
+int item_activate_selected(void);
+void *item_data(void);
+char item_tag(void);
+
+/* item list manipulation for lxdialog use */
+#define MAXITEMSTR 200
+struct dialog_item {
+ char str[MAXITEMSTR]; /* promtp displayed */
+ char tag;
+ void *data; /* pointer to menu item - used by menubox+checklist */
+ int selected; /* Set to 1 by dialog_*() function if selected. */
+};
+
+/* list of lialog_items */
+struct dialog_list {
+ struct dialog_item node;
+ struct dialog_list *next;
+};
+
+extern struct dialog_list *item_cur;
+extern struct dialog_list item_nil;
+extern struct dialog_list *item_head;
+
+int item_count(void);
+void item_set(int n);
+int item_n(void);
+const char *item_str(void);
+int item_is_selected(void);
+int item_is_tag(char tag);
+#define item_foreach() \
+ for (item_cur = item_head ? item_head: item_cur; \
+ item_cur && (item_cur != &item_nil); item_cur = item_cur->next)
+
+/* generic key handlers */
+int on_key_esc(WINDOW *win);
+int on_key_resize(void);
+
+int init_dialog(const char *backtitle);
+void set_dialog_backtitle(const char *backtitle);
+void end_dialog(int x, int y);
+void attr_clear(WINDOW * win, int height, int width, chtype attr);
+void dialog_clear(void);
+void print_autowrap(WINDOW * win, const char *prompt, int width, int y, int x);
+void print_button(WINDOW * win, const char *label, int y, int x, int selected);
+void print_title(WINDOW *dialog, const char *title, int width);
+void draw_box(WINDOW * win, int y, int x, int height, int width, chtype box,
+ chtype border);
+void draw_shadow(WINDOW * win, int y, int x, int height, int width);
+
+int first_alpha(const char *string, const char *exempt);
+int dialog_yesno(const char *title, const char *prompt, int height, int width);
+int dialog_msgbox(const char *title, const char *prompt, int height,
+ int width, int pause);
+int dialog_textbox(const char *title, const char *file, int height, int width);
+int dialog_menu(const char *title, const char *prompt,
+ const void *selected, int *s_scroll);
+int dialog_checklist(const char *title, const char *prompt, int height,
+ int width, int list_height);
+extern char dialog_input_result[];
+int dialog_inputbox(const char *title, const char *prompt, int height,
+ int width, const char *init);
+
+/*
+ * This is the base for fictitious keys, which activate
+ * the buttons.
+ *
+ * Mouse-generated keys are the following:
+ * -- the first 32 are used as numbers, in addition to '0'-'9'
+ * -- the lowercase are used to signal mouse-enter events (M_EVENT + 'o')
+ * -- uppercase chars are used to invoke the button (M_EVENT + 'O')
+ */
+#define M_EVENT (KEY_MAX+1)
diff --git a/util/kconfig/lxdialog/inputbox.c b/util/kconfig/lxdialog/inputbox.c
new file mode 100644
index 0000000..38585f0
--- /dev/null
+++ b/util/kconfig/lxdialog/inputbox.c
@@ -0,0 +1,240 @@
+/*
+ * inputbox.c -- implements the input box
+ *
+ * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dialog.h"
+
+char dialog_input_result[MAX_LEN + 1];
+
+/*
+ * Print the termination buttons
+ */
+static void print_buttons(WINDOW * dialog, int height, int width, int selected)
+{
+ int x = width / 2 - 11;
+ int y = height - 2;
+
+ print_button(dialog, gettext(" Ok "), y, x, selected == 0);
+ print_button(dialog, gettext(" Help "), y, x + 14, selected == 1);
+
+ wmove(dialog, y, x + 1 + 14 * selected);
+ wrefresh(dialog);
+}
+
+/*
+ * Display a dialog box for inputing a string
+ */
+int dialog_inputbox(const char *title, const char *prompt, int height, int width,
+ const char *init)
+{
+ int i, x, y, box_y, box_x, box_width;
+ int input_x = 0, scroll = 0, key = 0, button = -1;
+ char *instr = dialog_input_result;
+ WINDOW *dialog;
+
+ if (!init)
+ instr[0] = '\0';
+ else
+ strcpy(instr, init);
+
+do_resize:
+ if (getmaxy(stdscr) <= (height - 2))
+ return -ERRDISPLAYTOOSMALL;
+ if (getmaxx(stdscr) <= (width - 2))
+ return -ERRDISPLAYTOOSMALL;
+
+ /* center dialog box on screen */
+ x = (COLS - width) / 2;
+ y = (LINES - height) / 2;
+
+ draw_shadow(stdscr, y, x, height, width);
+
+ dialog = newwin(height, width, y, x);
+ keypad(dialog, TRUE);
+
+ draw_box(dialog, 0, 0, height, width,
+ dlg.dialog.atr, dlg.border.atr);
+ wattrset(dialog, dlg.border.atr);
+ mvwaddch(dialog, height - 3, 0, ACS_LTEE);
+ for (i = 0; i < width - 2; i++)
+ waddch(dialog, ACS_HLINE);
+ wattrset(dialog, dlg.dialog.atr);
+ waddch(dialog, ACS_RTEE);
+
+ print_title(dialog, title, width);
+
+ wattrset(dialog, dlg.dialog.atr);
+ print_autowrap(dialog, prompt, width - 2, 1, 3);
+
+ /* Draw the input field box */
+ box_width = width - 6;
+ getyx(dialog, y, x);
+ box_y = y + 2;
+ box_x = (width - box_width) / 2;
+ draw_box(dialog, y + 1, box_x - 1, 3, box_width + 2,
+ dlg.border.atr, dlg.dialog.atr);
+
+ print_buttons(dialog, height, width, 0);
+
+ /* Set up the initial value */
+ wmove(dialog, box_y, box_x);
+ wattrset(dialog, dlg.inputbox.atr);
+
+ input_x = strlen(instr);
+
+ if (input_x >= box_width) {
+ scroll = input_x - box_width + 1;
+ input_x = box_width - 1;
+ for (i = 0; i < box_width - 1; i++)
+ waddch(dialog, instr[scroll + i]);
+ } else {
+ waddstr(dialog, instr);
+ }
+
+ wmove(dialog, box_y, box_x + input_x);
+
+ wrefresh(dialog);
+
+ while (key != KEY_ESC) {
+ key = wgetch(dialog);
+
+ if (button == -1) { /* Input box selected */
+ switch (key) {
+ case TAB:
+ case KEY_UP:
+ case KEY_DOWN:
+ break;
+ case KEY_LEFT:
+ continue;
+ case KEY_RIGHT:
+ continue;
+ case KEY_BACKSPACE:
+ case 127:
+ if (input_x || scroll) {
+ wattrset(dialog, dlg.inputbox.atr);
+ if (!input_x) {
+ scroll = scroll < box_width - 1 ? 0 : scroll - (box_width - 1);
+ wmove(dialog, box_y, box_x);
+ for (i = 0; i < box_width; i++)
+ waddch(dialog,
+ instr[scroll + input_x + i] ?
+ instr[scroll + input_x + i] : ' ');
+ input_x = strlen(instr) - scroll;
+ } else
+ input_x--;
+ instr[scroll + input_x] = '\0';
+ mvwaddch(dialog, box_y, input_x + box_x, ' ');
+ wmove(dialog, box_y, input_x + box_x);
+ wrefresh(dialog);
+ }
+ continue;
+ default:
+ if (key < 0x100 && isprint(key)) {
+ if (scroll + input_x < MAX_LEN) {
+ wattrset(dialog, dlg.inputbox.atr);
+ instr[scroll + input_x] = key;
+ instr[scroll + input_x + 1] = '\0';
+ if (input_x == box_width - 1) {
+ scroll++;
+ wmove(dialog, box_y, box_x);
+ for (i = 0; i < box_width - 1; i++)
+ waddch(dialog, instr [scroll + i]);
+ } else {
+ wmove(dialog, box_y, input_x++ + box_x);
+ waddch(dialog, key);
+ }
+ wrefresh(dialog);
+ } else
+ flash(); /* Alarm user about overflow */
+ continue;
+ }
+ }
+ }
+ switch (key) {
+ case 'O':
+ case 'o':
+ delwin(dialog);
+ return 0;
+ case 'H':
+ case 'h':
+ delwin(dialog);
+ return 1;
+ case KEY_UP:
+ case KEY_LEFT:
+ switch (button) {
+ case -1:
+ button = 1; /* Indicates "Cancel" button is selected */
+ print_buttons(dialog, height, width, 1);
+ break;
+ case 0:
+ button = -1; /* Indicates input box is selected */
+ print_buttons(dialog, height, width, 0);
+ wmove(dialog, box_y, box_x + input_x);
+ wrefresh(dialog);
+ break;
+ case 1:
+ button = 0; /* Indicates "OK" button is selected */
+ print_buttons(dialog, height, width, 0);
+ break;
+ }
+ break;
+ case TAB:
+ case KEY_DOWN:
+ case KEY_RIGHT:
+ switch (button) {
+ case -1:
+ button = 0; /* Indicates "OK" button is selected */
+ print_buttons(dialog, height, width, 0);
+ break;
+ case 0:
+ button = 1; /* Indicates "Cancel" button is selected */
+ print_buttons(dialog, height, width, 1);
+ break;
+ case 1:
+ button = -1; /* Indicates input box is selected */
+ print_buttons(dialog, height, width, 0);
+ wmove(dialog, box_y, box_x + input_x);
+ wrefresh(dialog);
+ break;
+ }
+ break;
+ case ' ':
+ case '\n':
+ delwin(dialog);
+ return (button == -1 ? 0 : button);
+ case 'X':
+ case 'x':
+ key = KEY_ESC;
+ break;
+ case KEY_ESC:
+ key = on_key_esc(dialog);
+ break;
+#ifdef NCURSES_VERSION
+ case KEY_RESIZE:
+ delwin(dialog);
+ on_key_resize();
+ goto do_resize;
+#endif
+ }
+ }
+
+ delwin(dialog);
+ return KEY_ESC; /* ESC pressed */
+}
diff --git a/util/kconfig/lxdialog/menubox.c b/util/kconfig/lxdialog/menubox.c
new file mode 100644
index 0000000..243d6c0
--- /dev/null
+++ b/util/kconfig/lxdialog/menubox.c
@@ -0,0 +1,436 @@
+/*
+ * menubox.c -- implements the menu box
+ *
+ * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcapw@cfw.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Changes by Clifford Wolf (god@clifford.at)
+ *
+ * [ 1998-06-13 ]
+ *
+ * *) A bugfix for the Page-Down problem
+ *
+ * *) Formerly when I used Page Down and Page Up, the cursor would be set
+ * to the first position in the menu box. Now lxdialog is a bit
+ * smarter and works more like other menu systems (just have a look at
+ * it).
+ *
+ * *) Formerly if I selected something my scrolling would be broken because
+ * lxdialog is re-invoked by the Menuconfig shell script, can't
+ * remember the last scrolling position, and just sets it so that the
+ * cursor is at the bottom of the box. Now it writes the temporary file
+ * lxdialog.scrltmp which contains this information. The file is
+ * deleted by lxdialog if the user leaves a submenu or enters a new
+ * one, but it would be nice if Menuconfig could make another "rm -f"
+ * just to be sure. Just try it out - you will recognise a difference!
+ *
+ * [ 1998-06-14 ]
+ *
+ * *) Now lxdialog is crash-safe against broken "lxdialog.scrltmp" files
+ * and menus change their size on the fly.
+ *
+ * *) If for some reason the last scrolling position is not saved by
+ * lxdialog, it sets the scrolling so that the selected item is in the
+ * middle of the menu box, not at the bottom.
+ *
+ * 02 January 1999, Michael Elizabeth Chastain (mec@shout.net)
+ * Reset 'scroll' to 0 if the value from lxdialog.scrltmp is bogus.
+ * This fixes a bug in Menuconfig where using ' ' to descend into menus
+ * would leave mis-synchronized lxdialog.scrltmp files lying around,
+ * fscanf would read in 'scroll', and eventually that value would get used.
+ */
+
+#include "dialog.h"
+
+static int menu_width, item_x;
+
+/*
+ * Print menu item
+ */
+static void do_print_item(WINDOW * win, const char *item, int line_y,
+ int selected, int hotkey)
+{
+ int j;
+ char *menu_item = malloc(menu_width + 1);
+
+ strncpy(menu_item, item, menu_width - item_x);
+ menu_item[menu_width - item_x] = '\0';
+ j = first_alpha(menu_item, "YyNnMmHh");
+
+ /* Clear 'residue' of last item */
+ wattrset(win, dlg.menubox.atr);
+ wmove(win, line_y, 0);
+#if OLD_NCURSES
+ {
+ int i;
+ for (i = 0; i < menu_width; i++)
+ waddch(win, ' ');
+ }
+#else
+ wclrtoeol(win);
+#endif
+ wattrset(win, selected ? dlg.item_selected.atr : dlg.item.atr);
+ mvwaddstr(win, line_y, item_x, menu_item);
+ if (hotkey) {
+ wattrset(win, selected ? dlg.tag_key_selected.atr
+ : dlg.tag_key.atr);
+ mvwaddch(win, line_y, item_x + j, menu_item[j]);
+ }
+ if (selected) {
+ wmove(win, line_y, item_x + 1);
+ }
+ free(menu_item);
+ wrefresh(win);
+}
+
+#define print_item(index, choice, selected) \
+do { \
+ item_set(index); \
+ do_print_item(menu, item_str(), choice, selected, !item_is_tag(':')); \
+} while (0)
+
+/*
+ * Print the scroll indicators.
+ */
+static void print_arrows(WINDOW * win, int item_no, int scroll, int y, int x,
+ int height)
+{
+ int cur_y, cur_x;
+
+ getyx(win, cur_y, cur_x);
+
+ wmove(win, y, x);
+
+ if (scroll > 0) {
+ wattrset(win, dlg.uarrow.atr);
+ waddch(win, ACS_UARROW);
+ waddstr(win, "(-)");
+ } else {
+ wattrset(win, dlg.menubox.atr);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ }
+
+ y = y + height + 1;
+ wmove(win, y, x);
+ wrefresh(win);
+
+ if ((height < item_no) && (scroll + height < item_no)) {
+ wattrset(win, dlg.darrow.atr);
+ waddch(win, ACS_DARROW);
+ waddstr(win, "(+)");
+ } else {
+ wattrset(win, dlg.menubox_border.atr);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ waddch(win, ACS_HLINE);
+ }
+
+ wmove(win, cur_y, cur_x);
+ wrefresh(win);
+}
+
+/*
+ * Display the termination buttons.
+ */
+static void print_buttons(WINDOW * win, int height, int width, int selected)
+{
+ int x = width / 2 - 16;
+ int y = height - 2;
+
+ print_button(win, gettext("Select"), y, x, selected == 0);
+ print_button(win, gettext(" Exit "), y, x + 12, selected == 1);
+ print_button(win, gettext(" Help "), y, x + 24, selected == 2);
+
+ wmove(win, y, x + 1 + 12 * selected);
+ wrefresh(win);
+}
+
+/* scroll up n lines (n may be negative) */
+static void do_scroll(WINDOW *win, int *scroll, int n)
+{
+ /* Scroll menu up */
+ scrollok(win, TRUE);
+ wscrl(win, n);
+ scrollok(win, FALSE);
+ *scroll = *scroll + n;
+ wrefresh(win);
+}
+
+/*
+ * Display a menu for choosing among a number of options
+ */
+int dialog_menu(const char *title, const char *prompt,
+ const void *selected, int *s_scroll)
+{
+ int i, j, x, y, box_x, box_y;
+ int height, width, menu_height;
+ int key = 0, button = 0, scroll = 0, choice = 0;
+ int first_item = 0, max_choice;
+ WINDOW *dialog, *menu;
+
+do_resize:
+ height = getmaxy(stdscr);
+ width = getmaxx(stdscr);
+ if (height < 15 || width < 65)
+ return -ERRDISPLAYTOOSMALL;
+
+ height -= 4;
+ width -= 5;
+ menu_height = height - 10;
+
+ max_choice = MIN(menu_height, item_count());
+
+ /* center dialog box on screen */
+ x = (COLS - width) / 2;
+ y = (LINES - height) / 2;
+
+ draw_shadow(stdscr, y, x, height, width);
+
+ dialog = newwin(height, width, y, x);
+ keypad(dialog, TRUE);
+
+ draw_box(dialog, 0, 0, height, width,
+ dlg.dialog.atr, dlg.border.atr);
+ wattrset(dialog, dlg.border.atr);
+ mvwaddch(dialog, height - 3, 0, ACS_LTEE);
+ for (i = 0; i < width - 2; i++)
+ waddch(dialog, ACS_HLINE);
+ wattrset(dialog, dlg.dialog.atr);
+ wbkgdset(dialog, dlg.dialog.atr & A_COLOR);
+ waddch(dialog, ACS_RTEE);
+
+ print_title(dialog, title, width);
+
+ wattrset(dialog, dlg.dialog.atr);
+ print_autowrap(dialog, prompt, width - 2, 1, 3);
+
+ menu_width = width - 6;
+ box_y = height - menu_height - 5;
+ box_x = (width - menu_width) / 2 - 1;
+
+ /* create new window for the menu */
+ menu = subwin(dialog, menu_height, menu_width,
+ y + box_y + 1, x + box_x + 1);
+ keypad(menu, TRUE);
+
+ /* draw a box around the menu items */
+ draw_box(dialog, box_y, box_x, menu_height + 2, menu_width + 2,
+ dlg.menubox_border.atr, dlg.menubox.atr);
+
+ if (menu_width >= 80)
+ item_x = (menu_width - 70) / 2;
+ else
+ item_x = 4;
+
+ /* Set choice to default item */
+ item_foreach()
+ if (selected && (selected == item_data()))
+ choice = item_n();
+ /* get the saved scroll info */
+ scroll = *s_scroll;
+ if ((scroll <= choice) && (scroll + max_choice > choice) &&
+ (scroll >= 0) && (scroll + max_choice <= item_count())) {
+ first_item = scroll;
+ choice = choice - scroll;
+ } else {
+ scroll = 0;
+ }
+ if ((choice >= max_choice)) {
+ if (choice >= item_count() - max_choice / 2)
+ scroll = first_item = item_count() - max_choice;
+ else
+ scroll = first_item = choice - max_choice / 2;
+ choice = choice - scroll;
+ }
+
+ /* Print the menu */
+ for (i = 0; i < max_choice; i++) {
+ print_item(first_item + i, i, i == choice);
+ }
+
+ wnoutrefresh(menu);
+
+ print_arrows(dialog, item_count(), scroll,
+ box_y, box_x + item_x + 1, menu_height);
+
+ print_buttons(dialog, height, width, 0);
+ wmove(menu, choice, item_x + 1);
+ wrefresh(menu);
+
+ while (key != KEY_ESC) {
+ key = wgetch(menu);
+
+ if (key < 256 && isalpha(key))
+ key = tolower(key);
+
+ if (strchr("ynmh", key))
+ i = max_choice;
+ else {
+ for (i = choice + 1; i < max_choice; i++) {
+ item_set(scroll + i);
+ j = first_alpha(item_str(), "YyNnMmHh");
+ if (key == tolower(item_str()[j]))
+ break;
+ }
+ if (i == max_choice)
+ for (i = 0; i < max_choice; i++) {
+ item_set(scroll + i);
+ j = first_alpha(item_str(), "YyNnMmHh");
+ if (key == tolower(item_str()[j]))
+ break;
+ }
+ }
+
+ if (i < max_choice ||
+ key == KEY_UP || key == KEY_DOWN ||
+ key == '-' || key == '+' ||
+ key == KEY_PPAGE || key == KEY_NPAGE) {
+ /* Remove highligt of current item */
+ print_item(scroll + choice, choice, FALSE);
+
+ if (key == KEY_UP || key == '-') {
+ if (choice < 2 && scroll) {
+ /* Scroll menu down */
+ do_scroll(menu, &scroll, -1);
+
+ print_item(scroll, 0, FALSE);
+ } else
+ choice = MAX(choice - 1, 0);
+
+ } else if (key == KEY_DOWN || key == '+') {
+ print_item(scroll+choice, choice, FALSE);
+
+ if ((choice > max_choice - 3) &&
+ (scroll + max_choice < item_count())) {
+ /* Scroll menu up */
+ do_scroll(menu, &scroll, 1);
+
+ print_item(scroll+max_choice - 1,
+ max_choice - 1, FALSE);
+ } else
+ choice = MIN(choice + 1, max_choice - 1);
+
+ } else if (key == KEY_PPAGE) {
+ scrollok(menu, TRUE);
+ for (i = 0; (i < max_choice); i++) {
+ if (scroll > 0) {
+ do_scroll(menu, &scroll, -1);
+ print_item(scroll, 0, FALSE);
+ } else {
+ if (choice > 0)
+ choice--;
+ }
+ }
+
+ } else if (key == KEY_NPAGE) {
+ for (i = 0; (i < max_choice); i++) {
+ if (scroll + max_choice < item_count()) {
+ do_scroll(menu, &scroll, 1);
+ print_item(scroll+max_choice-1,
+ max_choice - 1, FALSE);
+ } else {
+ if (choice + 1 < max_choice)
+ choice++;
+ }
+ }
+ } else
+ choice = i;
+
+ print_item(scroll + choice, choice, TRUE);
+
+ print_arrows(dialog, item_count(), scroll,
+ box_y, box_x + item_x + 1, menu_height);
+
+ wnoutrefresh(dialog);
+ wrefresh(menu);
+
+ continue; /* wait for another key press */
+ }
+
+ switch (key) {
+ case KEY_LEFT:
+ case TAB:
+ case KEY_RIGHT:
+ button = ((key == KEY_LEFT ? --button : ++button) < 0)
+ ? 2 : (button > 2 ? 0 : button);
+
+ print_buttons(dialog, height, width, button);
+ wrefresh(menu);
+ break;
+ case ' ':
+ case 's':
+ case 'y':
+ case 'n':
+ case 'm':
+ case '/':
+ /* save scroll info */
+ *s_scroll = scroll;
+ delwin(menu);
+ delwin(dialog);
+ item_set(scroll + choice);
+ item_set_selected(1);
+ switch (key) {
+ case 's':
+ return 3;
+ case 'y':
+ return 3;
+ case 'n':
+ return 4;
+ case 'm':
+ return 5;
+ case ' ':
+ return 6;
+ case '/':
+ return 7;
+ }
+ return 0;
+ case 'h':
+ case '?':
+ button = 2;
+ case '\n':
+ *s_scroll = scroll;
+ delwin(menu);
+ delwin(dialog);
+ item_set(scroll + choice);
+ item_set_selected(1);
+ return button;
+ case 'e':
+ case 'x':
+ key = KEY_ESC;
+ break;
+ case KEY_ESC:
+ key = on_key_esc(menu);
+ break;
+#ifdef NCURSES_VERSION
+ case KEY_RESIZE:
+ on_key_resize();
+ delwin(menu);
+ delwin(dialog);
+ goto do_resize;
+#endif
+ }
+ }
+ delwin(menu);
+ delwin(dialog);
+ return key; /* ESC pressed */
+}
diff --git a/util/kconfig/lxdialog/textbox.c b/util/kconfig/lxdialog/textbox.c
new file mode 100644
index 0000000..68b5757
--- /dev/null
+++ b/util/kconfig/lxdialog/textbox.c
@@ -0,0 +1,393 @@
+/*
+ * textbox.c -- implements the text box
+ *
+ * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dialog.h"
+
+static void back_lines(int n);
+static void print_page(WINDOW * win, int height, int width);
+static void print_line(WINDOW * win, int row, int width);
+static char *get_line(void);
+static void print_position(WINDOW * win);
+
+static int hscroll;
+static int begin_reached, end_reached, page_length;
+static const char *buf;
+static const char *page;
+
+/*
+ * refresh window content
+ */
+static void refresh_text_box(WINDOW *dialog, WINDOW *box, int boxh, int boxw,
+ int cur_y, int cur_x)
+{
+ print_page(box, boxh, boxw);
+ print_position(dialog);
+ wmove(dialog, cur_y, cur_x); /* Restore cursor position */
+ wrefresh(dialog);
+}
+
+
+/*
+ * Display text from a file in a dialog box.
+ */
+int dialog_textbox(const char *title, const char *tbuf,
+ int initial_height, int initial_width)
+{
+ int i, x, y, cur_x, cur_y, key = 0;
+ int height, width, boxh, boxw;
+ int passed_end;
+ WINDOW *dialog, *box;
+
+ begin_reached = 1;
+ end_reached = 0;
+ page_length = 0;
+ hscroll = 0;
+ buf = tbuf;
+ page = buf; /* page is pointer to start of page to be displayed */
+
+do_resize:
+ getmaxyx(stdscr, height, width);
+ if (height < 8 || width < 8)
+ return -ERRDISPLAYTOOSMALL;
+ if (initial_height != 0)
+ height = initial_height;
+ else
+ if (height > 4)
+ height -= 4;
+ else
+ height = 0;
+ if (initial_width != 0)
+ width = initial_width;
+ else
+ if (width > 5)
+ width -= 5;
+ else
+ width = 0;
+
+ /* center dialog box on screen */
+ x = (COLS - width) / 2;
+ y = (LINES - height) / 2;
+
+ draw_shadow(stdscr, y, x, height, width);
+
+ dialog = newwin(height, width, y, x);
+ keypad(dialog, TRUE);
+
+ /* Create window for box region, used for scrolling text */
+ boxh = height - 4;
+ boxw = width - 2;
+ box = subwin(dialog, boxh, boxw, y + 1, x + 1);
+ wattrset(box, dlg.dialog.atr);
+ wbkgdset(box, dlg.dialog.atr & A_COLOR);
+
+ keypad(box, TRUE);
+
+ /* register the new window, along with its borders */
+ draw_box(dialog, 0, 0, height, width,
+ dlg.dialog.atr, dlg.border.atr);
+
+ wattrset(dialog, dlg.border.atr);
+ mvwaddch(dialog, height - 3, 0, ACS_LTEE);
+ for (i = 0; i < width - 2; i++)
+ waddch(dialog, ACS_HLINE);
+ wattrset(dialog, dlg.dialog.atr);
+ wbkgdset(dialog, dlg.dialog.atr & A_COLOR);
+ waddch(dialog, ACS_RTEE);
+
+ print_title(dialog, title, width);
+
+ print_button(dialog, gettext(" Exit "), height - 2, width / 2 - 4, TRUE);
+ wnoutrefresh(dialog);
+ getyx(dialog, cur_y, cur_x); /* Save cursor position */
+
+ /* Print first page of text */
+ attr_clear(box, boxh, boxw, dlg.dialog.atr);
+ refresh_text_box(dialog, box, boxh, boxw, cur_y, cur_x);
+
+ while ((key != KEY_ESC) && (key != '\n')) {
+ key = wgetch(dialog);
+ switch (key) {
+ case 'E': /* Exit */
+ case 'e':
+ case 'X':
+ case 'x':
+ delwin(box);
+ delwin(dialog);
+ return 0;
+ case 'g': /* First page */
+ case KEY_HOME:
+ if (!begin_reached) {
+ begin_reached = 1;
+ page = buf;
+ refresh_text_box(dialog, box, boxh, boxw,
+ cur_y, cur_x);
+ }
+ break;
+ case 'G': /* Last page */
+ case KEY_END:
+
+ end_reached = 1;
+ /* point to last char in buf */
+ page = buf + strlen(buf);
+ back_lines(boxh);
+ refresh_text_box(dialog, box, boxh, boxw,
+ cur_y, cur_x);
+ break;
+ case 'K': /* Previous line */
+ case 'k':
+ case KEY_UP:
+ if (!begin_reached) {
+ back_lines(page_length + 1);
+
+ /* We don't call print_page() here but use
+ * scrolling to ensure faster screen update.
+ * However, 'end_reached' and 'page_length'
+ * should still be updated, and 'page' should
+ * point to start of next page. This is done
+ * by calling get_line() in the following
+ * 'for' loop. */
+ scrollok(box, TRUE);
+ wscrl(box, -1); /* Scroll box region down one line */
+ scrollok(box, FALSE);
+ page_length = 0;
+ passed_end = 0;
+ for (i = 0; i < boxh; i++) {
+ if (!i) {
+ /* print first line of page */
+ print_line(box, 0, boxw);
+ wnoutrefresh(box);
+ } else
+ /* Called to update 'end_reached' and 'page' */
+ get_line();
+ if (!passed_end)
+ page_length++;
+ if (end_reached && !passed_end)
+ passed_end = 1;
+ }
+
+ print_position(dialog);
+ wmove(dialog, cur_y, cur_x); /* Restore cursor position */
+ wrefresh(dialog);
+ }
+ break;
+ case 'B': /* Previous page */
+ case 'b':
+ case KEY_PPAGE:
+ if (begin_reached)
+ break;
+ back_lines(page_length + boxh);
+ refresh_text_box(dialog, box, boxh, boxw,
+ cur_y, cur_x);
+ break;
+ case 'J': /* Next line */
+ case 'j':
+ case KEY_DOWN:
+ if (!end_reached) {
+ begin_reached = 0;
+ scrollok(box, TRUE);
+ scroll(box); /* Scroll box region up one line */
+ scrollok(box, FALSE);
+ print_line(box, boxh - 1, boxw);
+ wnoutrefresh(box);
+ print_position(dialog);
+ wmove(dialog, cur_y, cur_x); /* Restore cursor position */
+ wrefresh(dialog);
+ }
+ break;
+ case KEY_NPAGE: /* Next page */
+ case ' ':
+ if (end_reached)
+ break;
+
+ begin_reached = 0;
+ refresh_text_box(dialog, box, boxh, boxw,
+ cur_y, cur_x);
+ break;
+ case '0': /* Beginning of line */
+ case 'H': /* Scroll left */
+ case 'h':
+ case KEY_LEFT:
+ if (hscroll <= 0)
+ break;
+
+ if (key == '0')
+ hscroll = 0;
+ else
+ hscroll--;
+ /* Reprint current page to scroll horizontally */
+ back_lines(page_length);
+ refresh_text_box(dialog, box, boxh, boxw,
+ cur_y, cur_x);
+ break;
+ case 'L': /* Scroll right */
+ case 'l':
+ case KEY_RIGHT:
+ if (hscroll >= MAX_LEN)
+ break;
+ hscroll++;
+ /* Reprint current page to scroll horizontally */
+ back_lines(page_length);
+ refresh_text_box(dialog, box, boxh, boxw,
+ cur_y, cur_x);
+ break;
+ case KEY_ESC:
+ key = on_key_esc(dialog);
+ break;
+#ifdef NCURSES_VERSION
+ case KEY_RESIZE:
+ back_lines(height);
+ delwin(box);
+ delwin(dialog);
+ on_key_resize();
+ goto do_resize;
+#endif
+ }
+ }
+ delwin(box);
+ delwin(dialog);
+ return key; /* ESC pressed */
+}
+
+/*
+ * Go back 'n' lines in text. Called by dialog_textbox().
+ * 'page' will be updated to point to the desired line in 'buf'.
+ */
+static void back_lines(int n)
+{
+ int i;
+
+ begin_reached = 0;
+ /* Go back 'n' lines */
+ for (i = 0; i < n; i++) {
+ if (*page == '\0') {
+ if (end_reached) {
+ end_reached = 0;
+ continue;
+ }
+ }
+ if (page == buf) {
+ begin_reached = 1;
+ return;
+ }
+ page--;
+ do {
+ if (page == buf) {
+ begin_reached = 1;
+ return;
+ }
+ page--;
+ } while (*page != '\n');
+ page++;
+ }
+}
+
+/*
+ * Print a new page of text. Called by dialog_textbox().
+ */
+static void print_page(WINDOW * win, int height, int width)
+{
+ int i, passed_end = 0;
+
+ page_length = 0;
+ for (i = 0; i < height; i++) {
+ print_line(win, i, width);
+ if (!passed_end)
+ page_length++;
+ if (end_reached && !passed_end)
+ passed_end = 1;
+ }
+ wnoutrefresh(win);
+}
+
+/*
+ * Print a new line of text. Called by dialog_textbox() and print_page().
+ */
+static void print_line(WINDOW * win, int row, int width)
+{
+ int y, x;
+ char *line;
+
+ line = get_line();
+ line += MIN(strlen(line), hscroll); /* Scroll horizontally */
+ wmove(win, row, 0); /* move cursor to correct line */
+ waddch(win, ' ');
+ waddnstr(win, line, MIN(strlen(line), width - 2));
+
+ getyx(win, y, x);
+ /* Clear 'residue' of previous line */
+#if OLD_NCURSES
+ {
+ int i;
+ for (i = 0; i < width - x; i++)
+ waddch(win, ' ');
+ }
+#else
+ wclrtoeol(win);
+#endif
+}
+
+/*
+ * Return current line of text. Called by dialog_textbox() and print_line().
+ * 'page' should point to start of current line before calling, and will be
+ * updated to point to start of next line.
+ */
+static char *get_line(void)
+{
+ int i = 0;
+ static char line[MAX_LEN + 1];
+
+ end_reached = 0;
+ while (*page != '\n') {
+ if (*page == '\0') {
+ if (!end_reached) {
+ end_reached = 1;
+ break;
+ }
+ } else if (i < MAX_LEN)
+ line[i++] = *(page++);
+ else {
+ /* Truncate lines longer than MAX_LEN characters */
+ if (i == MAX_LEN)
+ line[i++] = '\0';
+ page++;
+ }
+ }
+ if (i <= MAX_LEN)
+ line[i] = '\0';
+ if (!end_reached)
+ page++; /* move pass '\n' */
+
+ return line;
+}
+
+/*
+ * Print current position
+ */
+static void print_position(WINDOW * win)
+{
+ int percent;
+
+ wattrset(win, dlg.position_indicator.atr);
+ wbkgdset(win, dlg.position_indicator.atr & A_COLOR);
+ percent = (page - buf) * 100 / strlen(buf);
+ wmove(win, getmaxy(win) - 3, getmaxx(win) - 9);
+ wprintw(win, "(%3d%%)", percent);
+}
diff --git a/util/kconfig/lxdialog/util.c b/util/kconfig/lxdialog/util.c
new file mode 100644
index 0000000..afad684
--- /dev/null
+++ b/util/kconfig/lxdialog/util.c
@@ -0,0 +1,658 @@
+/*
+ * util.c
+ *
+ * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dialog.h"
+#include <stdarg.h>
+
+struct dialog_info dlg;
+
+static void set_mono_theme(void)
+{
+ dlg.screen.atr = A_NORMAL;
+ dlg.shadow.atr = A_NORMAL;
+ dlg.dialog.atr = A_NORMAL;
+ dlg.title.atr = A_BOLD;
+ dlg.border.atr = A_NORMAL;
+ dlg.button_active.atr = A_REVERSE;
+ dlg.button_inactive.atr = A_DIM;
+ dlg.button_key_active.atr = A_REVERSE;
+ dlg.button_key_inactive.atr = A_BOLD;
+ dlg.button_label_active.atr = A_REVERSE;
+ dlg.button_label_inactive.atr = A_NORMAL;
+ dlg.inputbox.atr = A_NORMAL;
+ dlg.inputbox_border.atr = A_NORMAL;
+ dlg.searchbox.atr = A_NORMAL;
+ dlg.searchbox_title.atr = A_BOLD;
+ dlg.searchbox_border.atr = A_NORMAL;
+ dlg.position_indicator.atr = A_BOLD;
+ dlg.menubox.atr = A_NORMAL;
+ dlg.menubox_border.atr = A_NORMAL;
+ dlg.item.atr = A_NORMAL;
+ dlg.item_selected.atr = A_REVERSE;
+ dlg.tag.atr = A_BOLD;
+ dlg.tag_selected.atr = A_REVERSE;
+ dlg.tag_key.atr = A_BOLD;
+ dlg.tag_key_selected.atr = A_REVERSE;
+ dlg.check.atr = A_BOLD;
+ dlg.check_selected.atr = A_REVERSE;
+ dlg.uarrow.atr = A_BOLD;
+ dlg.darrow.atr = A_BOLD;
+}
+
+#define DLG_COLOR(dialog, f, b, h) \
+do { \
+ dlg.dialog.fg = (f); \
+ dlg.dialog.bg = (b); \
+ dlg.dialog.hl = (h); \
+} while (0)
+
+static void set_classic_theme(void)
+{
+ DLG_COLOR(screen, COLOR_CYAN, COLOR_BLUE, true);
+ DLG_COLOR(shadow, COLOR_BLACK, COLOR_BLACK, true);
+ DLG_COLOR(dialog, COLOR_BLACK, COLOR_WHITE, false);
+ DLG_COLOR(title, COLOR_YELLOW, COLOR_WHITE, true);
+ DLG_COLOR(border, COLOR_WHITE, COLOR_WHITE, true);
+ DLG_COLOR(button_active, COLOR_WHITE, COLOR_BLUE, true);
+ DLG_COLOR(button_inactive, COLOR_BLACK, COLOR_WHITE, false);
+ DLG_COLOR(button_key_active, COLOR_WHITE, COLOR_BLUE, true);
+ DLG_COLOR(button_key_inactive, COLOR_RED, COLOR_WHITE, false);
+ DLG_COLOR(button_label_active, COLOR_YELLOW, COLOR_BLUE, true);
+ DLG_COLOR(button_label_inactive, COLOR_BLACK, COLOR_WHITE, true);
+ DLG_COLOR(inputbox, COLOR_BLACK, COLOR_WHITE, false);
+ DLG_COLOR(inputbox_border, COLOR_BLACK, COLOR_WHITE, false);
+ DLG_COLOR(searchbox, COLOR_BLACK, COLOR_WHITE, false);
+ DLG_COLOR(searchbox_title, COLOR_YELLOW, COLOR_WHITE, true);
+ DLG_COLOR(searchbox_border, COLOR_WHITE, COLOR_WHITE, true);
+ DLG_COLOR(position_indicator, COLOR_YELLOW, COLOR_WHITE, true);
+ DLG_COLOR(menubox, COLOR_BLACK, COLOR_WHITE, false);
+ DLG_COLOR(menubox_border, COLOR_WHITE, COLOR_WHITE, true);
+ DLG_COLOR(item, COLOR_BLACK, COLOR_WHITE, false);
+ DLG_COLOR(item_selected, COLOR_WHITE, COLOR_BLUE, true);
+ DLG_COLOR(tag, COLOR_YELLOW, COLOR_WHITE, true);
+ DLG_COLOR(tag_selected, COLOR_YELLOW, COLOR_BLUE, true);
+ DLG_COLOR(tag_key, COLOR_YELLOW, COLOR_WHITE, true);
+ DLG_COLOR(tag_key_selected, COLOR_YELLOW, COLOR_BLUE, true);
+ DLG_COLOR(check, COLOR_BLACK, COLOR_WHITE, false);
+ DLG_COLOR(check_selected, COLOR_WHITE, COLOR_BLUE, true);
+ DLG_COLOR(uarrow, COLOR_GREEN, COLOR_WHITE, true);
+ DLG_COLOR(darrow, COLOR_GREEN, COLOR_WHITE, true);
+}
+
+static void set_blackbg_theme(void)
+{
+ DLG_COLOR(screen, COLOR_RED, COLOR_BLACK, true);
+ DLG_COLOR(shadow, COLOR_BLACK, COLOR_BLACK, false);
+ DLG_COLOR(dialog, COLOR_WHITE, COLOR_BLACK, false);
+ DLG_COLOR(title, COLOR_RED, COLOR_BLACK, false);
+ DLG_COLOR(border, COLOR_BLACK, COLOR_BLACK, true);
+
+ DLG_COLOR(button_active, COLOR_YELLOW, COLOR_RED, false);
+ DLG_COLOR(button_inactive, COLOR_YELLOW, COLOR_BLACK, false);
+ DLG_COLOR(button_key_active, COLOR_YELLOW, COLOR_RED, true);
+ DLG_COLOR(button_key_inactive, COLOR_RED, COLOR_BLACK, false);
+ DLG_COLOR(button_label_active, COLOR_WHITE, COLOR_RED, false);
+ DLG_COLOR(button_label_inactive, COLOR_BLACK, COLOR_BLACK, true);
+
+ DLG_COLOR(inputbox, COLOR_YELLOW, COLOR_BLACK, false);
+ DLG_COLOR(inputbox_border, COLOR_YELLOW, COLOR_BLACK, false);
+
+ DLG_COLOR(searchbox, COLOR_YELLOW, COLOR_BLACK, false);
+ DLG_COLOR(searchbox_title, COLOR_YELLOW, COLOR_BLACK, true);
+ DLG_COLOR(searchbox_border, COLOR_BLACK, COLOR_BLACK, true);
+
+ DLG_COLOR(position_indicator, COLOR_RED, COLOR_BLACK, false);
+
+ DLG_COLOR(menubox, COLOR_YELLOW, COLOR_BLACK, false);
+ DLG_COLOR(menubox_border, COLOR_BLACK, COLOR_BLACK, true);
+
+ DLG_COLOR(item, COLOR_WHITE, COLOR_BLACK, false);
+ DLG_COLOR(item_selected, COLOR_WHITE, COLOR_RED, false);
+
+ DLG_COLOR(tag, COLOR_RED, COLOR_BLACK, false);
+ DLG_COLOR(tag_selected, COLOR_YELLOW, COLOR_RED, true);
+ DLG_COLOR(tag_key, COLOR_RED, COLOR_BLACK, false);
+ DLG_COLOR(tag_key_selected, COLOR_YELLOW, COLOR_RED, true);
+
+ DLG_COLOR(check, COLOR_YELLOW, COLOR_BLACK, false);
+ DLG_COLOR(check_selected, COLOR_YELLOW, COLOR_RED, true);
+
+ DLG_COLOR(uarrow, COLOR_RED, COLOR_BLACK, false);
+ DLG_COLOR(darrow, COLOR_RED, COLOR_BLACK, false);
+}
+
+static void set_bluetitle_theme(void)
+{
+ set_classic_theme();
+ DLG_COLOR(title, COLOR_BLUE, COLOR_WHITE, true);
+ DLG_COLOR(button_key_active, COLOR_YELLOW, COLOR_BLUE, true);
+ DLG_COLOR(button_label_active, COLOR_WHITE, COLOR_BLUE, true);
+ DLG_COLOR(searchbox_title, COLOR_BLUE, COLOR_WHITE, true);
+ DLG_COLOR(position_indicator, COLOR_BLUE, COLOR_WHITE, true);
+ DLG_COLOR(tag, COLOR_BLUE, COLOR_WHITE, true);
+ DLG_COLOR(tag_key, COLOR_BLUE, COLOR_WHITE, true);
+
+}
+
+/*
+ * Select color theme
+ */
+static int set_theme(const char *theme)
+{
+ int use_color = 1;
+ if (!theme)
+ set_bluetitle_theme();
+ else if (strcmp(theme, "classic") == 0)
+ set_classic_theme();
+ else if (strcmp(theme, "bluetitle") == 0)
+ set_bluetitle_theme();
+ else if (strcmp(theme, "blackbg") == 0)
+ set_blackbg_theme();
+ else if (strcmp(theme, "mono") == 0)
+ use_color = 0;
+
+ return use_color;
+}
+
+static void init_one_color(struct dialog_color *color)
+{
+ static int pair = 0;
+
+ pair++;
+ init_pair(pair, color->fg, color->bg);
+ if (color->hl)
+ color->atr = A_BOLD | COLOR_PAIR(pair);
+ else
+ color->atr = COLOR_PAIR(pair);
+}
+
+static void init_dialog_colors(void)
+{
+ init_one_color(&dlg.screen);
+ init_one_color(&dlg.shadow);
+ init_one_color(&dlg.dialog);
+ init_one_color(&dlg.title);
+ init_one_color(&dlg.border);
+ init_one_color(&dlg.button_active);
+ init_one_color(&dlg.button_inactive);
+ init_one_color(&dlg.button_key_active);
+ init_one_color(&dlg.button_key_inactive);
+ init_one_color(&dlg.button_label_active);
+ init_one_color(&dlg.button_label_inactive);
+ init_one_color(&dlg.inputbox);
+ init_one_color(&dlg.inputbox_border);
+ init_one_color(&dlg.searchbox);
+ init_one_color(&dlg.searchbox_title);
+ init_one_color(&dlg.searchbox_border);
+ init_one_color(&dlg.position_indicator);
+ init_one_color(&dlg.menubox);
+ init_one_color(&dlg.menubox_border);
+ init_one_color(&dlg.item);
+ init_one_color(&dlg.item_selected);
+ init_one_color(&dlg.tag);
+ init_one_color(&dlg.tag_selected);
+ init_one_color(&dlg.tag_key);
+ init_one_color(&dlg.tag_key_selected);
+ init_one_color(&dlg.check);
+ init_one_color(&dlg.check_selected);
+ init_one_color(&dlg.uarrow);
+ init_one_color(&dlg.darrow);
+}
+
+/*
+ * Setup for color display
+ */
+static void color_setup(const char *theme)
+{
+ int use_color;
+
+ use_color = set_theme(theme);
+ if (use_color && has_colors()) {
+ start_color();
+ init_dialog_colors();
+ } else
+ set_mono_theme();
+}
+
+/*
+ * Set window to attribute 'attr'
+ */
+void attr_clear(WINDOW * win, int height, int width, chtype attr)
+{
+ int i, j;
+
+ wattrset(win, attr);
+ for (i = 0; i < height; i++) {
+ wmove(win, i, 0);
+ for (j = 0; j < width; j++)
+ waddch(win, ' ');
+ }
+ touchwin(win);
+}
+
+void dialog_clear(void)
+{
+ attr_clear(stdscr, LINES, COLS, dlg.screen.atr);
+ /* Display background title if it exists ... - SLH */
+ if (dlg.backtitle != NULL) {
+ int i;
+
+ wattrset(stdscr, dlg.screen.atr);
+ mvwaddstr(stdscr, 0, 1, (char *)dlg.backtitle);
+ wmove(stdscr, 1, 1);
+ for (i = 1; i < COLS - 1; i++)
+ waddch(stdscr, ACS_HLINE);
+ }
+ wnoutrefresh(stdscr);
+}
+
+/*
+ * Do some initialization for dialog
+ */
+int init_dialog(const char *backtitle)
+{
+ int height, width;
+
+ initscr(); /* Init curses */
+ getmaxyx(stdscr, height, width);
+ if (height < 19 || width < 80) {
+ endwin();
+ return -ERRDISPLAYTOOSMALL;
+ }
+
+ dlg.backtitle = backtitle;
+ color_setup(getenv("MENUCONFIG_COLOR"));
+
+ keypad(stdscr, TRUE);
+ cbreak();
+ noecho();
+ dialog_clear();
+
+ return 0;
+}
+
+void set_dialog_backtitle(const char *backtitle)
+{
+ dlg.backtitle = backtitle;
+}
+
+/*
+ * End using dialog functions.
+ */
+void end_dialog(int x, int y)
+{
+ /* move cursor back to original position */
+ move(y, x);
+ refresh();
+ endwin();
+}
+
+/* Print the title of the dialog. Center the title and truncate
+ * tile if wider than dialog (- 2 chars).
+ **/
+void print_title(WINDOW *dialog, const char *title, int width)
+{
+ if (title) {
+ int tlen = MIN(width - 2, strlen(title));
+ wattrset(dialog, dlg.title.atr);
+ mvwaddch(dialog, 0, (width - tlen) / 2 - 1, ' ');
+ mvwaddnstr(dialog, 0, (width - tlen)/2, title, tlen);
+ waddch(dialog, ' ');
+ }
+}
+
+/*
+ * Print a string of text in a window, automatically wrap around to the
+ * next line if the string is too long to fit on one line. Newline
+ * characters '\n' are replaced by spaces. We start on a new line
+ * if there is no room for at least 4 nonblanks following a double-space.
+ */
+void print_autowrap(WINDOW * win, const char *prompt, int width, int y, int x)
+{
+ int newl, cur_x, cur_y;
+ int i, prompt_len, room, wlen;
+ char tempstr[MAX_LEN + 1], *word, *sp, *sp2;
+
+ strcpy(tempstr, prompt);
+
+ prompt_len = strlen(tempstr);
+
+ /*
+ * Remove newlines
+ */
+ for (i = 0; i < prompt_len; i++) {
+ if (tempstr[i] == '\n')
+ tempstr[i] = ' ';
+ }
+
+ if (prompt_len <= width - x * 2) { /* If prompt is short */
+ wmove(win, y, (width - prompt_len) / 2);
+ waddstr(win, tempstr);
+ } else {
+ cur_x = x;
+ cur_y = y;
+ newl = 1;
+ word = tempstr;
+ while (word && *word) {
+ sp = strchr(word, ' ');
+ if (sp)
+ *sp++ = 0;
+
+ /* Wrap to next line if either the word does not fit,
+ or it is the first word of a new sentence, and it is
+ short, and the next word does not fit. */
+ room = width - cur_x;
+ wlen = strlen(word);
+ if (wlen > room ||
+ (newl && wlen < 4 && sp
+ && wlen + 1 + strlen(sp) > room
+ && (!(sp2 = strchr(sp, ' '))
+ || wlen + 1 + (sp2 - sp) > room))) {
+ cur_y++;
+ cur_x = x;
+ }
+ wmove(win, cur_y, cur_x);
+ waddstr(win, word);
+ getyx(win, cur_y, cur_x);
+ cur_x++;
+ if (sp && *sp == ' ') {
+ cur_x++; /* double space */
+ while (*++sp == ' ') ;
+ newl = 1;
+ } else
+ newl = 0;
+ word = sp;
+ }
+ }
+}
+
+/*
+ * Print a button
+ */
+void print_button(WINDOW * win, const char *label, int y, int x, int selected)
+{
+ int i, temp;
+
+ wmove(win, y, x);
+ wattrset(win, selected ? dlg.button_active.atr
+ : dlg.button_inactive.atr);
+ waddstr(win, "<");
+ temp = strspn(label, " ");
+ label += temp;
+ wattrset(win, selected ? dlg.button_label_active.atr
+ : dlg.button_label_inactive.atr);
+ for (i = 0; i < temp; i++)
+ waddch(win, ' ');
+ wattrset(win, selected ? dlg.button_key_active.atr
+ : dlg.button_key_inactive.atr);
+ waddch(win, label[0]);
+ wattrset(win, selected ? dlg.button_label_active.atr
+ : dlg.button_label_inactive.atr);
+ waddstr(win, (char *)label + 1);
+ wattrset(win, selected ? dlg.button_active.atr
+ : dlg.button_inactive.atr);
+ waddstr(win, ">");
+ wmove(win, y, x + temp + 1);
+}
+
+/*
+ * Draw a rectangular box with line drawing characters
+ */
+void
+draw_box(WINDOW * win, int y, int x, int height, int width,
+ chtype box, chtype border)
+{
+ int i, j;
+
+ wattrset(win, 0);
+ for (i = 0; i < height; i++) {
+ wmove(win, y + i, x);
+ for (j = 0; j < width; j++)
+ if (!i && !j)
+ waddch(win, border | ACS_ULCORNER);
+ else if (i == height - 1 && !j)
+ waddch(win, border | ACS_LLCORNER);
+ else if (!i && j == width - 1)
+ waddch(win, box | ACS_URCORNER);
+ else if (i == height - 1 && j == width - 1)
+ waddch(win, box | ACS_LRCORNER);
+ else if (!i)
+ waddch(win, border | ACS_HLINE);
+ else if (i == height - 1)
+ waddch(win, box | ACS_HLINE);
+ else if (!j)
+ waddch(win, border | ACS_VLINE);
+ else if (j == width - 1)
+ waddch(win, box | ACS_VLINE);
+ else
+ waddch(win, box | ' ');
+ }
+}
+
+/*
+ * Draw shadows along the right and bottom edge to give a more 3D look
+ * to the boxes
+ */
+void draw_shadow(WINDOW * win, int y, int x, int height, int width)
+{
+ int i;
+
+ if (has_colors()) { /* Whether terminal supports color? */
+ wattrset(win, dlg.shadow.atr);
+ wmove(win, y + height, x + 2);
+ for (i = 0; i < width; i++)
+ waddch(win, winch(win) & A_CHARTEXT);
+ for (i = y + 1; i < y + height + 1; i++) {
+ wmove(win, i, x + width);
+ waddch(win, winch(win) & A_CHARTEXT);
+ waddch(win, winch(win) & A_CHARTEXT);
+ }
+ wnoutrefresh(win);
+ }
+}
+
+/*
+ * Return the position of the first alphabetic character in a string.
+ */
+int first_alpha(const char *string, const char *exempt)
+{
+ int i, in_paren = 0, c;
+
+ for (i = 0; i < strlen(string); i++) {
+ c = tolower(string[i]);
+
+ if (strchr("<[(", c))
+ ++in_paren;
+ if (strchr(">])", c) && in_paren > 0)
+ --in_paren;
+
+ if ((!in_paren) && isalpha(c) && strchr(exempt, c) == 0)
+ return i;
+ }
+
+ return 0;
+}
+
+/*
+ * ncurses uses ESC to detect escaped char sequences. This resutl in
+ * a small timeout before ESC is actually delivered to the application.
+ * lxdialog suggest <ESC> <ESC> which is correctly translated to two
+ * times esc. But then we need to ignore the second esc to avoid stepping
+ * out one menu too much. Filter away all escaped key sequences since
+ * keypad(FALSE) turn off ncurses support for escape sequences - and thats
+ * needed to make notimeout() do as expected.
+ */
+int on_key_esc(WINDOW *win)
+{
+ int key;
+ int key2;
+ int key3;
+
+ nodelay(win, TRUE);
+ keypad(win, FALSE);
+ key = wgetch(win);
+ key2 = wgetch(win);
+ do {
+ key3 = wgetch(win);
+ } while (key3 != ERR);
+ nodelay(win, FALSE);
+ keypad(win, TRUE);
+ if (key == KEY_ESC && key2 == ERR)
+ return KEY_ESC;
+ else if (key != ERR && key != KEY_ESC && key2 == ERR)
+ ungetch(key);
+
+ return -1;
+}
+
+/* redraw screen in new size */
+int on_key_resize(void)
+{
+ dialog_clear();
+#ifdef NCURSES_VERSION
+ return KEY_RESIZE;
+#endif
+}
+
+struct dialog_list *item_cur;
+struct dialog_list item_nil;
+struct dialog_list *item_head;
+
+void item_reset(void)
+{
+ struct dialog_list *p, *next;
+
+ for (p = item_head; p; p = next) {
+ next = p->next;
+ free(p);
+ }
+ item_head = NULL;
+ item_cur = &item_nil;
+}
+
+void item_make(const char *fmt, ...)
+{
+ va_list ap;
+ struct dialog_list *p = malloc(sizeof(*p));
+
+ if (item_head)
+ item_cur->next = p;
+ else
+ item_head = p;
+ item_cur = p;
+ memset(p, 0, sizeof(*p));
+
+ va_start(ap, fmt);
+ vsnprintf(item_cur->node.str, sizeof(item_cur->node.str), fmt, ap);
+ va_end(ap);
+}
+
+void item_add_str(const char *fmt, ...)
+{
+ va_list ap;
+ size_t avail;
+
+ avail = sizeof(item_cur->node.str) - strlen(item_cur->node.str);
+
+ va_start(ap, fmt);
+ vsnprintf(item_cur->node.str + strlen(item_cur->node.str),
+ avail, fmt, ap);
+ item_cur->node.str[sizeof(item_cur->node.str) - 1] = '\0';
+ va_end(ap);
+}
+
+void item_set_tag(char tag)
+{
+ item_cur->node.tag = tag;
+}
+void item_set_data(void *ptr)
+{
+ item_cur->node.data = ptr;
+}
+
+void item_set_selected(int val)
+{
+ item_cur->node.selected = val;
+}
+
+int item_activate_selected(void)
+{
+ item_foreach()
+ if (item_is_selected())
+ return 1;
+ return 0;
+}
+
+void *item_data(void)
+{
+ return item_cur->node.data;
+}
+
+char item_tag(void)
+{
+ return item_cur->node.tag;
+}
+
+int item_count(void)
+{
+ int n = 0;
+ struct dialog_list *p;
+
+ for (p = item_head; p; p = p->next)
+ n++;
+ return n;
+}
+
+void item_set(int n)
+{
+ int i = 0;
+ item_foreach()
+ if (i++ == n)
+ return;
+}
+
+int item_n(void)
+{
+ int n = 0;
+ struct dialog_list *p;
+
+ for (p = item_head; p; p = p->next) {
+ if (p == item_cur)
+ return n;
+ n++;
+ }
+ return 0;
+}
+
+const char *item_str(void)
+{
+ return item_cur->node.str;
+}
+
+int item_is_selected(void)
+{
+ return (item_cur->node.selected != 0);
+}
+
+int item_is_tag(char tag)
+{
+ return (item_cur->node.tag == tag);
+}
diff --git a/util/kconfig/lxdialog/yesno.c b/util/kconfig/lxdialog/yesno.c
new file mode 100644
index 0000000..4614d0f
--- /dev/null
+++ b/util/kconfig/lxdialog/yesno.c
@@ -0,0 +1,116 @@
+/*
+ * yesno.c -- implements the yes/no box
+ *
+ * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk)
+ * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dialog.h"
+
+/*
+ * Display termination buttons
+ */
+static void print_buttons(WINDOW * dialog, int height, int width, int selected)
+{
+ int x = width / 2 - 10;
+ int y = height - 2;
+
+ print_button(dialog, gettext(" Yes "), y, x, selected == 0);
+ print_button(dialog, gettext(" No "), y, x + 13, selected == 1);
+
+ wmove(dialog, y, x + 1 + 13 * selected);
+ wrefresh(dialog);
+}
+
+/*
+ * Display a dialog box with two buttons - Yes and No
+ */
+int dialog_yesno(const char *title, const char *prompt, int height, int width)
+{
+ int i, x, y, key = 0, button = 0;
+ WINDOW *dialog;
+
+do_resize:
+ if (getmaxy(stdscr) < (height + 4))
+ return -ERRDISPLAYTOOSMALL;
+ if (getmaxx(stdscr) < (width + 4))
+ return -ERRDISPLAYTOOSMALL;
+
+ /* center dialog box on screen */
+ x = (COLS - width) / 2;
+ y = (LINES - height) / 2;
+
+ draw_shadow(stdscr, y, x, height, width);
+
+ dialog = newwin(height, width, y, x);
+ keypad(dialog, TRUE);
+
+ draw_box(dialog, 0, 0, height, width,
+ dlg.dialog.atr, dlg.border.atr);
+ wattrset(dialog, dlg.border.atr);
+ mvwaddch(dialog, height - 3, 0, ACS_LTEE);
+ for (i = 0; i < width - 2; i++)
+ waddch(dialog, ACS_HLINE);
+ wattrset(dialog, dlg.dialog.atr);
+ waddch(dialog, ACS_RTEE);
+
+ print_title(dialog, title, width);
+
+ wattrset(dialog, dlg.dialog.atr);
+ print_autowrap(dialog, prompt, width - 2, 1, 3);
+
+ print_buttons(dialog, height, width, 0);
+
+ while (key != KEY_ESC) {
+ key = wgetch(dialog);
+ switch (key) {
+ case 'Y':
+ case 'y':
+ delwin(dialog);
+ return 0;
+ case 'N':
+ case 'n':
+ delwin(dialog);
+ return 1;
+
+ case TAB:
+ case KEY_LEFT:
+ case KEY_RIGHT:
+ button = ((key == KEY_LEFT ? --button : ++button) < 0) ? 1 : (button > 1 ? 0 : button);
+
+ print_buttons(dialog, height, width, button);
+ wrefresh(dialog);
+ break;
+ case ' ':
+ case '\n':
+ delwin(dialog);
+ return button;
+ case KEY_ESC:
+ key = on_key_esc(dialog);
+ break;
+#ifdef NCURSES_VERSION
+ case KEY_RESIZE:
+ delwin(dialog);
+ on_key_resize();
+ goto do_resize;
+#endif
+ }
+ }
+
+ delwin(dialog);
+ return key; /* ESC pressed */
+}
diff --git a/util/kconfig/mconf.c b/util/kconfig/mconf.c
new file mode 100644
index 0000000..72d3f68
--- /dev/null
+++ b/util/kconfig/mconf.c
@@ -0,0 +1,931 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * Introduced single menu mode (show all sub-menus in one large tree).
+ * 2002-11-06 Petr Baudis <pasky@ucw.cz>
+ *
+ * i18n, 2005, Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <locale.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+#include "lxdialog/dialog.h"
+
+static const char mconf_readme[] = N_(
+"Overview\n"
+"--------\n"
+"Some features may be built directly into coreboot.\n"
+"Some may be made into loadable runtime modules. Some features\n"
+"may be completely removed altogether. There are also certain\n"
+"parameters which are not really features, but must be\n"
+"entered in as decimal or hexadecimal numbers or possibly text.\n"
+"\n"
+"Menu items beginning with following braces represent features that\n"
+" [ ] can be built in or removed\n"
+" < > can be built in, modularized or removed\n"
+" { } can be built in or modularized (selected by other feature)\n"
+" - - are selected by other feature,\n"
+"while *, M or whitespace inside braces means to build in, build as\n"
+"a module or to exclude the feature respectively.\n"
+"\n"
+"To change any of these features, highlight it with the cursor\n"
+"keys and press <Y> to build it in, <M> to make it a module or\n"
+"<N> to removed it. You may also press the <Space Bar> to cycle\n"
+"through the available options (ie. Y->N->M->Y).\n"
+"\n"
+"Some additional keyboard hints:\n"
+"\n"
+"Menus\n"
+"----------\n"
+"o Use the Up/Down arrow keys (cursor keys) to highlight the item\n"
+" you wish to change or submenu wish to select and press <Enter>.\n"
+" Submenus are designated by \"--->\".\n"
+"\n"
+" Shortcut: Press the option's highlighted letter (hotkey).\n"
+" Pressing a hotkey more than once will sequence\n"
+" through all visible items which use that hotkey.\n"
+"\n"
+" You may also use the <PAGE UP> and <PAGE DOWN> keys to scroll\n"
+" unseen options into view.\n"
+"\n"
+"o To exit a menu use the cursor keys to highlight the <Exit> button\n"
+" and press <ENTER>.\n"
+"\n"
+" Shortcut: Press <ESC><ESC> or <E> or <X> if there is no hotkey\n"
+" using those letters. You may press a single <ESC>, but\n"
+" there is a delayed response which you may find annoying.\n"
+"\n"
+" Also, the <TAB> and cursor keys will cycle between <Select>,\n"
+" <Exit> and <Help>\n"
+"\n"
+"o To get help with an item, use the cursor keys to highlight <Help>\n"
+" and Press <ENTER>.\n"
+"\n"
+" Shortcut: Press <H> or <?>.\n"
+"\n"
+"\n"
+"Radiolists (Choice lists)\n"
+"-----------\n"
+"o Use the cursor keys to select the option you wish to set and press\n"
+" <S> or the <SPACE BAR>.\n"
+"\n"
+" Shortcut: Press the first letter of the option you wish to set then\n"
+" press <S> or <SPACE BAR>.\n"
+"\n"
+"o To see available help for the item, use the cursor keys to highlight\n"
+" <Help> and Press <ENTER>.\n"
+"\n"
+" Shortcut: Press <H> or <?>.\n"
+"\n"
+" Also, the <TAB> and cursor keys will cycle between <Select> and\n"
+" <Help>\n"
+"\n"
+"\n"
+"Data Entry\n"
+"-----------\n"
+"o Enter the requested information and press <ENTER>\n"
+" If you are entering hexadecimal values, it is not necessary to\n"
+" add the '0x' prefix to the entry.\n"
+"\n"
+"o For help, use the <TAB> or cursor keys to highlight the help option\n"
+" and press <ENTER>. You can try <TAB><H> as well.\n"
+"\n"
+"\n"
+"Text Box (Help Window)\n"
+"--------\n"
+"o Use the cursor keys to scroll up/down/left/right. The VI editor\n"
+" keys h,j,k,l function here as do <SPACE BAR> and <B> for those\n"
+" who are familiar with less and lynx.\n"
+"\n"
+"o Press <E>, <X>, <Enter> or <Esc><Esc> to exit.\n"
+"\n"
+"\n"
+"Alternate Configuration Files\n"
+"-----------------------------\n"
+"Menuconfig supports the use of alternate configuration files for\n"
+"those who, for various reasons, find it necessary to switch\n"
+"between different configurations.\n"
+"\n"
+"At the end of the main menu you will find two options. One is\n"
+"for saving the current configuration to a file of your choosing.\n"
+"The other option is for loading a previously saved alternate\n"
+"configuration.\n"
+"\n"
+"Even if you don't use alternate configuration files, but you\n"
+"find during a Menuconfig session that you have completely messed\n"
+"up your settings, you may use the \"Load Alternate...\" option to\n"
+"restore your previously saved settings from \".config\" without\n"
+"restarting Menuconfig.\n"
+"\n"
+"Other information\n"
+"-----------------\n"
+"If you use Menuconfig in an XTERM window make sure you have your\n"
+"$TERM variable set to point to a xterm definition which supports color.\n"
+"Otherwise, Menuconfig will look rather bad. Menuconfig will not\n"
+"display correctly in a RXVT window because rxvt displays only one\n"
+"intensity of color, bright.\n"
+"\n"
+"Menuconfig will display larger menus on screens or xterms which are\n"
+"set to display more than the standard 25 row by 80 column geometry.\n"
+"In order for this to work, the \"stty size\" command must be able to\n"
+"display the screen's current row and column geometry. I STRONGLY\n"
+"RECOMMEND that you make sure you do NOT have the shell variables\n"
+"LINES and COLUMNS exported into your environment. Some distributions\n"
+"export those variables via /etc/profile. Some ncurses programs can\n"
+"become confused when those variables (LINES & COLUMNS) don't reflect\n"
+"the true screen size.\n"
+"\n"
+"Optional personality available\n"
+"------------------------------\n"
+"If you prefer to have all of the options listed in a single\n"
+"menu, rather than the default multimenu hierarchy, run the menuconfig\n"
+"with MENUCONFIG_MODE environment variable set to single_menu. Example:\n"
+"\n"
+"make MENUCONFIG_MODE=single_menu menuconfig\n"
+"\n"
+"<Enter> will then unroll the appropriate category, or enfold it if it\n"
+"is already unrolled.\n"
+"\n"
+"Note that this mode can eventually be a little more CPU expensive\n"
+"(especially with a larger number of unrolled categories) than the\n"
+"default mode.\n"
+"\n"
+"Different color themes available\n"
+"--------------------------------\n"
+"It is possible to select different color themes using the variable\n"
+"MENUCONFIG_COLOR. To select a theme use:\n"
+"\n"
+"make MENUCONFIG_COLOR=<theme> menuconfig\n"
+"\n"
+"Available themes are\n"
+" mono => selects colors suitable for monochrome displays\n"
+" blackbg => selects a color scheme with black background\n"
+" classic => theme with blue background. The classic look\n"
+" bluetitle => a LCD friendly version of classic. (default)\n"
+"\n"),
+menu_instructions[] = N_(
+ "Arrow keys navigate the menu. "
+ "<Enter> selects submenus --->. "
+ "Highlighted letters are hotkeys. "
+ "Pressing <Y> includes, <N> excludes, <M> modularizes features. "
+ "Press <Esc><Esc> to exit, <?> for Help, </> for Search. "
+ "Legend: [*] built-in [ ] excluded <M> module < > module capable"),
+radiolist_instructions[] = N_(
+ "Use the arrow keys to navigate this window or "
+ "press the hotkey of the item you wish to select "
+ "followed by the <SPACE BAR>. "
+ "Press <?> for additional information about this option."),
+inputbox_instructions_int[] = N_(
+ "Please enter a decimal value. "
+ "Fractions will not be accepted. "
+ "Use the <TAB> key to move from the input field to the buttons below it."),
+inputbox_instructions_hex[] = N_(
+ "Please enter a hexadecimal value. "
+ "Use the <TAB> key to move from the input field to the buttons below it."),
+inputbox_instructions_string[] = N_(
+ "Please enter a string value. "
+ "Use the <TAB> key to move from the input field to the buttons below it."),
+setmod_text[] = N_(
+ "This feature depends on another which has been configured as a module.\n"
+ "As a result, this feature will be built as a module."),
+nohelp_text[] = N_(
+ "There is no help available for this option.\n"),
+load_config_text[] = N_(
+ "Enter the name of the configuration file you wish to load. "
+ "Accept the name shown to restore the configuration you "
+ "last retrieved. Leave blank to abort."),
+load_config_help[] = N_(
+ "\n"
+ "For various reasons, one may wish to keep several different\n"
+ "configurations available on a single machine.\n"
+ "\n"
+ "If you have saved a previous configuration in a file other than the\n"
+ "default, entering the name of the file here will allow you\n"
+ "to modify that configuration.\n"
+ "\n"
+ "If you are uncertain, then you have probably never used alternate\n"
+ "configuration files. You should therefor leave this blank to abort.\n"),
+save_config_text[] = N_(
+ "Enter a filename to which this configuration should be saved "
+ "as an alternate. Leave blank to abort."),
+save_config_help[] = N_(
+ "\n"
+ "For various reasons, one may wish to keep different\n"
+ "configurations available on a single machine.\n"
+ "\n"
+ "Entering a file name here will allow you to later retrieve, modify\n"
+ "and use the current configuration as an alternate to whatever\n"
+ "configuration options you have selected at that time.\n"
+ "\n"
+ "If you are uncertain what all this means then you should probably\n"
+ "leave this blank.\n"),
+search_help[] = N_(
+ "\n"
+ "Search for CONFIG_ symbols and display their relations.\n"
+ "Regular expressions are allowed.\n"
+ "Example: search for \"^FOO\"\n"
+ "Result:\n"
+ "-----------------------------------------------------------------\n"
+ "Symbol: FOO [=m]\n"
+ "Prompt: Foo bus is used to drive the bar HW\n"
+ "Defined at drivers/pci/Kconfig:47\n"
+ "Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n"
+ "Location:\n"
+ " -> Bus options (PCI, PCMCIA, EISA, MCA, ISA)\n"
+ " -> PCI support (PCI [=y])\n"
+ " -> PCI access mode (<choice> [=y])\n"
+ "Selects: LIBCRC32\n"
+ "Selected by: BAR\n"
+ "-----------------------------------------------------------------\n"
+ "o The line 'Prompt:' shows the text used in the menu structure for\n"
+ " this CONFIG_ symbol\n"
+ "o The 'Defined at' line tell at what file / line number the symbol\n"
+ " is defined\n"
+ "o The 'Depends on:' line tell what symbols needs to be defined for\n"
+ " this symbol to be visible in the menu (selectable)\n"
+ "o The 'Location:' lines tell where in the menu structure this symbol\n"
+ " is located\n"
+ " A location followed by a [=y] indicate that this is a selectable\n"
+ " menu item - and current value is displayed inside brackets.\n"
+ "o The 'Selects:' line tell what symbol will be automatically\n"
+ " selected if this symbol is selected (y or m)\n"
+ "o The 'Selected by' line tell what symbol has selected this symbol\n"
+ "\n"
+ "Only relevant lines are shown.\n"
+ "\n\n"
+ "Search examples:\n"
+ "Examples: USB => find all CONFIG_ symbols containing USB\n"
+ " ^USB => find all CONFIG_ symbols starting with USB\n"
+ " USB$ => find all CONFIG_ symbols ending with USB\n"
+ "\n");
+
+static int indent;
+static struct menu *current_menu;
+static int child_count;
+static int single_menu_mode;
+
+static void conf(struct menu *menu);
+static void conf_choice(struct menu *menu);
+static void conf_string(struct menu *menu);
+static void conf_load(void);
+static void conf_save(void);
+static void show_textbox(const char *title, const char *text, int r, int c);
+static void show_helptext(const char *title, const char *text);
+static void show_help(struct menu *menu);
+
+static void get_prompt_str(struct gstr *r, struct property *prop)
+{
+ int i, j;
+ struct menu *submenu[8], *menu;
+
+ str_printf(r, _("Prompt: %s\n"), _(prop->text));
+ str_printf(r, _(" Defined at %s:%d\n"), prop->menu->file->name,
+ prop->menu->lineno);
+ if (!expr_is_yes(prop->visible.expr)) {
+ str_append(r, _(" Depends on: "));
+ expr_gstr_print(prop->visible.expr, r);
+ str_append(r, "\n");
+ }
+ menu = prop->menu->parent;
+ for (i = 0; menu != &rootmenu && i < 8; menu = menu->parent)
+ submenu[i++] = menu;
+ if (i > 0) {
+ str_printf(r, _(" Location:\n"));
+ for (j = 4; --i >= 0; j += 2) {
+ menu = submenu[i];
+ str_printf(r, "%*c-> %s", j, ' ', _(menu_get_prompt(menu)));
+ if (menu->sym) {
+ str_printf(r, " (%s [=%s])", menu->sym->name ?
+ menu->sym->name : _("<choice>"),
+ sym_get_string_value(menu->sym));
+ }
+ str_append(r, "\n");
+ }
+ }
+}
+
+static void get_symbol_str(struct gstr *r, struct symbol *sym)
+{
+ bool hit;
+ struct property *prop;
+
+ if (sym && sym->name)
+ str_printf(r, "Symbol: %s [=%s]\n", sym->name,
+ sym_get_string_value(sym));
+ for_all_prompts(sym, prop)
+ get_prompt_str(r, prop);
+ hit = false;
+ for_all_properties(sym, prop, P_SELECT) {
+ if (!hit) {
+ str_append(r, " Selects: ");
+ hit = true;
+ } else
+ str_printf(r, " && ");
+ expr_gstr_print(prop->expr, r);
+ }
+ if (hit)
+ str_append(r, "\n");
+ if (sym->rev_dep.expr) {
+ str_append(r, _(" Selected by: "));
+ expr_gstr_print(sym->rev_dep.expr, r);
+ str_append(r, "\n");
+ }
+ str_append(r, "\n\n");
+}
+
+static struct gstr get_relations_str(struct symbol **sym_arr)
+{
+ struct symbol *sym;
+ struct gstr res = str_new();
+ int i;
+
+ for (i = 0; sym_arr && (sym = sym_arr[i]); i++)
+ get_symbol_str(&res, sym);
+ if (!i)
+ str_append(&res, _("No matches found.\n"));
+ return res;
+}
+
+static char filename[PATH_MAX+1];
+static void set_config_filename(const char *config_filename)
+{
+ static char menu_backtitle[PATH_MAX+128];
+ int size;
+ struct symbol *sym;
+
+ sym = sym_lookup("KERNELVERSION", 0);
+ sym_calc_value(sym);
+ size = snprintf(menu_backtitle, sizeof(menu_backtitle),
+ _("%s - coreboot v%s Configuration"),
+ config_filename, getenv("KERNELVERSION"));
+ if (size >= sizeof(menu_backtitle))
+ menu_backtitle[sizeof(menu_backtitle)-1] = '\0';
+ set_dialog_backtitle(menu_backtitle);
+
+ size = snprintf(filename, sizeof(filename), "%s", config_filename);
+ if (size >= sizeof(filename))
+ filename[sizeof(filename)-1] = '\0';
+}
+
+
+static void search_conf(void)
+{
+ struct symbol **sym_arr;
+ struct gstr res;
+ char *dialog_input;
+ int dres;
+again:
+ dialog_clear();
+ dres = dialog_inputbox(_("Search Configuration Parameter"),
+ _("Enter CONFIG_ (sub)string to search for "
+ "(with or without \"CONFIG\")"),
+ 10, 75, "");
+ switch (dres) {
+ case 0:
+ break;
+ case 1:
+ show_helptext(_("Search Configuration"), search_help);
+ goto again;
+ default:
+ return;
+ }
+
+ /* strip CONFIG_ if necessary */
+ dialog_input = dialog_input_result;
+ if (strncasecmp(dialog_input_result, "CONFIG_", 7) == 0)
+ dialog_input += 7;
+
+ sym_arr = sym_re_search(dialog_input);
+ res = get_relations_str(sym_arr);
+ free(sym_arr);
+ show_textbox(_("Search Results"), str_get(&res), 0, 0);
+ str_free(&res);
+}
+
+static void build_conf(struct menu *menu)
+{
+ struct symbol *sym;
+ struct property *prop;
+ struct menu *child;
+ int type, tmp, doint = 2;
+ tristate val;
+ char ch;
+
+ if (!menu_is_visible(menu))
+ return;
+
+ sym = menu->sym;
+ prop = menu->prompt;
+ if (!sym) {
+ if (prop && menu != current_menu) {
+ const char *prompt = menu_get_prompt(menu);
+ switch (prop->type) {
+ case P_MENU:
+ child_count++;
+ prompt = _(prompt);
+ if (single_menu_mode) {
+ item_make("%s%*c%s",
+ menu->data ? "-->" : "++>",
+ indent + 1, ' ', prompt);
+ } else
+ item_make(" %*c%s --->", indent + 1, ' ', prompt);
+
+ item_set_tag('m');
+ item_set_data(menu);
+ if (single_menu_mode && menu->data)
+ goto conf_childs;
+ return;
+ case P_COMMENT:
+ if (prompt) {
+ child_count++;
+ item_make(" %*c*** %s ***", indent + 1, ' ', _(prompt));
+ item_set_tag(':');
+ item_set_data(menu);
+ }
+ break;
+ default:
+ if (prompt) {
+ child_count++;
+ item_make("---%*c%s", indent + 1, ' ', _(prompt));
+ item_set_tag(':');
+ item_set_data(menu);
+ }
+ }
+ } else
+ doint = 0;
+ goto conf_childs;
+ }
+
+ type = sym_get_type(sym);
+ if (sym_is_choice(sym)) {
+ struct symbol *def_sym = sym_get_choice_value(sym);
+ struct menu *def_menu = NULL;
+
+ child_count++;
+ for (child = menu->list; child; child = child->next) {
+ if (menu_is_visible(child) && child->sym == def_sym)
+ def_menu = child;
+ }
+
+ val = sym_get_tristate_value(sym);
+ if (sym_is_changable(sym)) {
+ switch (type) {
+ case S_BOOLEAN:
+ item_make("[%c]", val == no ? ' ' : '*');
+ break;
+ case S_TRISTATE:
+ switch (val) {
+ case yes: ch = '*'; break;
+ case mod: ch = 'M'; break;
+ default: ch = ' '; break;
+ }
+ item_make("<%c>", ch);
+ break;
+ }
+ item_set_tag('t');
+ item_set_data(menu);
+ } else {
+ item_make(" ");
+ item_set_tag(def_menu ? 't' : ':');
+ item_set_data(menu);
+ }
+
+ item_add_str("%*c%s", indent + 1, ' ', _(menu_get_prompt(menu)));
+ if (val == yes) {
+ if (def_menu) {
+ item_add_str(" (%s)", _(menu_get_prompt(def_menu)));
+ item_add_str(" --->");
+ if (def_menu->list) {
+ indent += 2;
+ build_conf(def_menu);
+ indent -= 2;
+ }
+ }
+ return;
+ }
+ } else {
+ if (menu == current_menu) {
+ item_make("---%*c%s", indent + 1, ' ', _(menu_get_prompt(menu)));
+ item_set_tag(':');
+ item_set_data(menu);
+ goto conf_childs;
+ }
+ child_count++;
+ val = sym_get_tristate_value(sym);
+ if (sym_is_choice_value(sym) && val == yes) {
+ item_make(" ");
+ item_set_tag(':');
+ item_set_data(menu);
+ } else {
+ switch (type) {
+ case S_BOOLEAN:
+ if (sym_is_changable(sym))
+ item_make("[%c]", val == no ? ' ' : '*');
+ else
+ item_make("-%c-", val == no ? ' ' : '*');
+ item_set_tag('t');
+ item_set_data(menu);
+ break;
+ case S_TRISTATE:
+ switch (val) {
+ case yes: ch = '*'; break;
+ case mod: ch = 'M'; break;
+ default: ch = ' '; break;
+ }
+ if (sym_is_changable(sym)) {
+ if (sym->rev_dep.tri == mod)
+ item_make("{%c}", ch);
+ else
+ item_make("<%c>", ch);
+ } else
+ item_make("-%c-", ch);
+ item_set_tag('t');
+ item_set_data(menu);
+ break;
+ default:
+ tmp = 2 + strlen(sym_get_string_value(sym)); /* () = 2 */
+ item_make("(%s)", sym_get_string_value(sym));
+ tmp = indent - tmp + 4;
+ if (tmp < 0)
+ tmp = 0;
+ item_add_str("%*c%s%s", tmp, ' ', _(menu_get_prompt(menu)),
+ (sym_has_value(sym) || !sym_is_changable(sym)) ?
+ "" : _(" (NEW)"));
+ item_set_tag('s');
+ item_set_data(menu);
+ goto conf_childs;
+ }
+ }
+ item_add_str("%*c%s%s", indent + 1, ' ', _(menu_get_prompt(menu)),
+ (sym_has_value(sym) || !sym_is_changable(sym)) ?
+ "" : _(" (NEW)"));
+ if (menu->prompt->type == P_MENU) {
+ item_add_str(" --->");
+ return;
+ }
+ }
+
+conf_childs:
+ indent += doint;
+ for (child = menu->list; child; child = child->next)
+ build_conf(child);
+ indent -= doint;
+}
+
+static void conf(struct menu *menu)
+{
+ struct menu *submenu;
+ const char *prompt = menu_get_prompt(menu);
+ struct symbol *sym;
+ struct menu *active_menu = NULL;
+ int res;
+ int s_scroll = 0;
+
+ while (1) {
+ item_reset();
+ current_menu = menu;
+ build_conf(menu);
+ if (!child_count)
+ break;
+ if (menu == &rootmenu) {
+ item_make("--- ");
+ item_set_tag(':');
+ item_make(_(" Load an Alternate Configuration File"));
+ item_set_tag('L');
+ item_make(_(" Save an Alternate Configuration File"));
+ item_set_tag('S');
+ }
+ dialog_clear();
+ res = dialog_menu(prompt ? _(prompt) : _("Main Menu"),
+ _(menu_instructions),
+ active_menu, &s_scroll);
+ if (res == 1 || res == KEY_ESC || res == -ERRDISPLAYTOOSMALL)
+ break;
+ if (!item_activate_selected())
+ continue;
+ if (!item_tag())
+ continue;
+
+ submenu = item_data();
+ active_menu = item_data();
+ if (submenu)
+ sym = submenu->sym;
+ else
+ sym = NULL;
+
+ switch (res) {
+ case 0:
+ switch (item_tag()) {
+ case 'm':
+ if (single_menu_mode)
+ submenu->data = (void *) (long) !submenu->data;
+ else
+ conf(submenu);
+ break;
+ case 't':
+ if (sym_is_choice(sym) && sym_get_tristate_value(sym) == yes)
+ conf_choice(submenu);
+ else if (submenu->prompt->type == P_MENU)
+ conf(submenu);
+ break;
+ case 's':
+ conf_string(submenu);
+ break;
+ case 'L':
+ conf_load();
+ break;
+ case 'S':
+ conf_save();
+ break;
+ }
+ break;
+ case 2:
+ if (sym)
+ show_help(submenu);
+ else
+ show_helptext(_("README"), _(mconf_readme));
+ break;
+ case 3:
+ if (item_is_tag('t')) {
+ if (sym_set_tristate_value(sym, yes))
+ break;
+ if (sym_set_tristate_value(sym, mod))
+ show_textbox(NULL, setmod_text, 6, 74);
+ }
+ break;
+ case 4:
+ if (item_is_tag('t'))
+ sym_set_tristate_value(sym, no);
+ break;
+ case 5:
+ if (item_is_tag('t'))
+ sym_set_tristate_value(sym, mod);
+ break;
+ case 6:
+ if (item_is_tag('t'))
+ sym_toggle_tristate_value(sym);
+ else if (item_is_tag('m'))
+ conf(submenu);
+ break;
+ case 7:
+ search_conf();
+ break;
+ }
+ }
+}
+
+static void show_textbox(const char *title, const char *text, int r, int c)
+{
+ dialog_clear();
+ dialog_textbox(title, text, r, c);
+}
+
+static void show_helptext(const char *title, const char *text)
+{
+ show_textbox(title, text, 0, 0);
+}
+
+static void show_help(struct menu *menu)
+{
+ struct gstr help = str_new();
+ struct symbol *sym = menu->sym;
+
+ if (menu_has_help(menu))
+ {
+ if (sym->name) {
+ str_printf(&help, "CONFIG_%s:\n\n", sym->name);
+ str_append(&help, _(menu_get_help(menu)));
+ str_append(&help, "\n");
+ }
+ } else {
+ str_append(&help, nohelp_text);
+ }
+ get_symbol_str(&help, sym);
+ show_helptext(_(menu_get_prompt(menu)), str_get(&help));
+ str_free(&help);
+}
+
+static void conf_choice(struct menu *menu)
+{
+ const char *prompt = _(menu_get_prompt(menu));
+ struct menu *child;
+ struct symbol *active;
+
+ active = sym_get_choice_value(menu->sym);
+ while (1) {
+ int res;
+ int selected;
+ item_reset();
+
+ current_menu = menu;
+ for (child = menu->list; child; child = child->next) {
+ if (!menu_is_visible(child))
+ continue;
+ item_make("%s", _(menu_get_prompt(child)));
+ item_set_data(child);
+ if (child->sym == active)
+ item_set_selected(1);
+ if (child->sym == sym_get_choice_value(menu->sym))
+ item_set_tag('X');
+ }
+ dialog_clear();
+ res = dialog_checklist(prompt ? _(prompt) : _("Main Menu"),
+ _(radiolist_instructions),
+ 15, 70, 6);
+ selected = item_activate_selected();
+ switch (res) {
+ case 0:
+ if (selected) {
+ child = item_data();
+ sym_set_tristate_value(child->sym, yes);
+ }
+ return;
+ case 1:
+ if (selected) {
+ child = item_data();
+ show_help(child);
+ active = child->sym;
+ } else
+ show_help(menu);
+ break;
+ case KEY_ESC:
+ return;
+ case -ERRDISPLAYTOOSMALL:
+ return;
+ }
+ }
+}
+
+static void conf_string(struct menu *menu)
+{
+ const char *prompt = menu_get_prompt(menu);
+
+ while (1) {
+ int res;
+ const char *heading;
+
+ switch (sym_get_type(menu->sym)) {
+ case S_INT:
+ heading = _(inputbox_instructions_int);
+ break;
+ case S_HEX:
+ heading = _(inputbox_instructions_hex);
+ break;
+ case S_STRING:
+ heading = _(inputbox_instructions_string);
+ break;
+ default:
+ heading = _("Internal mconf error!");
+ }
+ dialog_clear();
+ res = dialog_inputbox(prompt ? _(prompt) : _("Main Menu"),
+ heading, 10, 75,
+ sym_get_string_value(menu->sym));
+ switch (res) {
+ case 0:
+ if (sym_set_string_value(menu->sym, dialog_input_result))
+ return;
+ show_textbox(NULL, _("You have made an invalid entry."), 5, 43);
+ break;
+ case 1:
+ show_help(menu);
+ break;
+ case KEY_ESC:
+ return;
+ }
+ }
+}
+
+static void conf_load(void)
+{
+
+ while (1) {
+ int res;
+ dialog_clear();
+ res = dialog_inputbox(NULL, load_config_text,
+ 11, 55, filename);
+ switch(res) {
+ case 0:
+ if (!dialog_input_result[0])
+ return;
+ if (!conf_read(dialog_input_result)) {
+ set_config_filename(dialog_input_result);
+ sym_set_change_count(1);
+ return;
+ }
+ show_textbox(NULL, _("File does not exist!"), 5, 38);
+ break;
+ case 1:
+ show_helptext(_("Load Alternate Configuration"), load_config_help);
+ break;
+ case KEY_ESC:
+ return;
+ }
+ }
+}
+
+static void conf_save(void)
+{
+ while (1) {
+ int res;
+ dialog_clear();
+ res = dialog_inputbox(NULL, save_config_text,
+ 11, 55, filename);
+ switch(res) {
+ case 0:
+ if (!dialog_input_result[0])
+ return;
+ if (!conf_write(dialog_input_result)) {
+ set_config_filename(dialog_input_result);
+ return;
+ }
+ show_textbox(NULL, _("Can't create file! Probably a nonexistent directory."), 5, 60);
+ break;
+ case 1:
+ show_helptext(_("Save Alternate Configuration"), save_config_help);
+ break;
+ case KEY_ESC:
+ return;
+ }
+ }
+}
+
+int main(int ac, char **av)
+{
+ int saved_x = 0, saved_y = 0;
+ char *mode;
+ int res;
+
+ setlocale(LC_ALL, "");
+ bindtextdomain(PACKAGE, LOCALEDIR);
+ textdomain(PACKAGE);
+
+ conf_parse(av[1]);
+ conf_read(NULL);
+
+ mode = getenv("MENUCONFIG_MODE");
+ if (mode) {
+ if (!strcasecmp(mode, "single_menu"))
+ single_menu_mode = 1;
+ }
+
+ if (stdscr) getyx(stdscr, saved_y, saved_x);
+ if (init_dialog(NULL)) {
+ fprintf(stderr, N_("Your display is too small to run Menuconfig!\n"));
+ fprintf(stderr, N_("It must be at least 19 lines by 80 columns.\n"));
+ return 1;
+ }
+
+ set_config_filename(conf_get_configname());
+ do {
+ conf(&rootmenu);
+ dialog_clear();
+ if (conf_get_changed())
+ res = dialog_yesno(NULL,
+ _("Do you wish to save your "
+ "new configuration?\n"
+ "<ESC><ESC> to continue."),
+ 6, 60);
+ else
+ res = -1;
+ } while (res == KEY_ESC);
+ end_dialog(saved_x, saved_y);
+
+ switch (res) {
+ case 0:
+ if (conf_write(filename)) {
+ fprintf(stderr, _("\n\n"
+ "Error during writing of the configuration.\n"
+ "Your configuration changes were NOT saved."
+ "\n\n"));
+ return 1;
+ }
+ if (conf_write_autoconf()) {
+ fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n"));
+ return 1;
+ }
+ case -1:
+ printf(_("\n\n"
+ "*** End of coreboot configuration.\n"
+ "*** Execute 'make' to build or try 'make help'."
+ "\n\n"));
+ break;
+ default:
+ fprintf(stderr, _("\n\n"
+ "Your configuration changes were NOT saved."
+ "\n\n"));
+ }
+
+ return 0;
+}
diff --git a/util/kconfig/menu.c b/util/kconfig/menu.c
new file mode 100644
index 0000000..606ceb9
--- /dev/null
+++ b/util/kconfig/menu.c
@@ -0,0 +1,463 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <stdlib.h>
+#include <string.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+struct menu rootmenu;
+static struct menu **last_entry_ptr;
+
+struct file *file_list;
+struct file *current_file;
+
+void menu_warn(struct menu *menu, const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+ fprintf(stderr, "%s:%d:warning: ", menu->file->name, menu->lineno);
+ vfprintf(stderr, fmt, ap);
+ fprintf(stderr, "\n");
+ va_end(ap);
+}
+
+static void prop_warn(struct property *prop, const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+ fprintf(stderr, "%s:%d:warning: ", prop->file->name, prop->lineno);
+ vfprintf(stderr, fmt, ap);
+ fprintf(stderr, "\n");
+ va_end(ap);
+}
+
+void menu_init(void)
+{
+ current_entry = current_menu = &rootmenu;
+ last_entry_ptr = &rootmenu.list;
+}
+
+void menu_add_entry(struct symbol *sym)
+{
+ struct menu *menu;
+
+ menu = malloc(sizeof(*menu));
+ memset(menu, 0, sizeof(*menu));
+ menu->sym = sym;
+ menu->parent = current_menu;
+ menu->file = current_file;
+ menu->lineno = zconf_lineno();
+
+ *last_entry_ptr = menu;
+ last_entry_ptr = &menu->next;
+ current_entry = menu;
+}
+
+void menu_end_entry(void)
+{
+}
+
+struct menu *menu_add_menu(void)
+{
+ menu_end_entry();
+ last_entry_ptr = ¤t_entry->list;
+ return current_menu = current_entry;
+}
+
+void menu_end_menu(void)
+{
+ last_entry_ptr = ¤t_menu->next;
+ current_menu = current_menu->parent;
+}
+
+struct expr *menu_check_dep(struct expr *e)
+{
+ if (!e)
+ return e;
+
+ switch (e->type) {
+ case E_NOT:
+ e->left.expr = menu_check_dep(e->left.expr);
+ break;
+ case E_OR:
+ case E_AND:
+ e->left.expr = menu_check_dep(e->left.expr);
+ e->right.expr = menu_check_dep(e->right.expr);
+ break;
+ case E_SYMBOL:
+ /* change 'm' into 'm' && MODULES */
+ if (e->left.sym == &symbol_mod)
+ return expr_alloc_and(e, expr_alloc_symbol(modules_sym));
+ break;
+ default:
+ break;
+ }
+ return e;
+}
+
+void menu_add_dep(struct expr *dep)
+{
+ current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep));
+}
+
+void menu_set_type(int type)
+{
+ struct symbol *sym = current_entry->sym;
+
+ if (sym->type == type)
+ return;
+ if (sym->type == S_UNKNOWN) {
+ sym->type = type;
+ return;
+ }
+ menu_warn(current_entry, "type of '%s' redefined from '%s' to '%s'",
+ sym->name ? sym->name : "<choice>",
+ sym_type_name(sym->type), sym_type_name(type));
+}
+
+struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep)
+{
+ struct property *prop = prop_alloc(type, current_entry->sym);
+
+ prop->menu = current_entry;
+ prop->expr = expr;
+ prop->visible.expr = menu_check_dep(dep);
+
+ if (prompt) {
+ if (isspace(*prompt)) {
+ prop_warn(prop, "leading whitespace ignored");
+ while (isspace(*prompt))
+ prompt++;
+ }
+ if (current_entry->prompt)
+ prop_warn(prop, "prompt redefined");
+ current_entry->prompt = prop;
+ }
+ prop->text = prompt;
+
+ return prop;
+}
+
+struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep)
+{
+ return menu_add_prop(type, prompt, NULL, dep);
+}
+
+void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep)
+{
+ menu_add_prop(type, NULL, expr, dep);
+}
+
+void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep)
+{
+ menu_add_prop(type, NULL, expr_alloc_symbol(sym), dep);
+}
+
+void menu_add_option(int token, char *arg)
+{
+ struct property *prop;
+
+ switch (token) {
+ case T_OPT_MODULES:
+ prop = prop_alloc(P_DEFAULT, modules_sym);
+ prop->expr = expr_alloc_symbol(current_entry->sym);
+ break;
+ case T_OPT_DEFCONFIG_LIST:
+ if (!sym_defconfig_list)
+ sym_defconfig_list = current_entry->sym;
+ else if (sym_defconfig_list != current_entry->sym)
+ zconf_error("trying to redefine defconfig symbol");
+ break;
+ case T_OPT_ENV:
+ prop_add_env(arg);
+ break;
+ }
+}
+
+static int menu_range_valid_sym(struct symbol *sym, struct symbol *sym2)
+{
+ return sym2->type == S_INT || sym2->type == S_HEX ||
+ (sym2->type == S_UNKNOWN && sym_string_valid(sym, sym2->name));
+}
+
+void sym_check_prop(struct symbol *sym)
+{
+ struct property *prop;
+ struct symbol *sym2;
+ for (prop = sym->prop; prop; prop = prop->next) {
+ switch (prop->type) {
+ case P_DEFAULT:
+ if ((sym->type == S_STRING || sym->type == S_INT || sym->type == S_HEX) &&
+ prop->expr->type != E_SYMBOL)
+ prop_warn(prop,
+ "default for config symbol '%'"
+ " must be a single symbol", sym->name);
+ break;
+ case P_SELECT:
+ sym2 = prop_get_symbol(prop);
+ if (sym->type != S_BOOLEAN && sym->type != S_TRISTATE)
+ prop_warn(prop,
+ "config symbol '%s' uses select, but is "
+ "not boolean or tristate", sym->name);
+ else if (sym2->type != S_UNKNOWN &&
+ sym2->type != S_BOOLEAN &&
+ sym2->type != S_TRISTATE)
+ prop_warn(prop,
+ "'%s' has wrong type. 'select' only "
+ "accept arguments of boolean and "
+ "tristate type", sym2->name);
+ break;
+ case P_RANGE:
+ if (sym->type != S_INT && sym->type != S_HEX)
+ prop_warn(prop, "range is only allowed "
+ "for int or hex symbols");
+ if (!menu_range_valid_sym(sym, prop->expr->left.sym) ||
+ !menu_range_valid_sym(sym, prop->expr->right.sym))
+ prop_warn(prop, "range is invalid");
+ break;
+ default:
+ ;
+ }
+ }
+}
+
+void menu_finalize(struct menu *parent)
+{
+ struct menu *menu, *last_menu;
+ struct symbol *sym;
+ struct property *prop;
+ struct expr *parentdep, *basedep, *dep, *dep2, **ep;
+
+ sym = parent->sym;
+ if (parent->list) {
+ if (sym && sym_is_choice(sym)) {
+ /* find the first choice value and find out choice type */
+ for (menu = parent->list; menu; menu = menu->next) {
+ if (menu->sym) {
+ current_entry = parent;
+ if (sym->type == S_UNKNOWN)
+ menu_set_type(menu->sym->type);
+ current_entry = menu;
+ if (menu->sym->type == S_UNKNOWN)
+ menu_set_type(sym->type);
+ break;
+ }
+ }
+ parentdep = expr_alloc_symbol(sym);
+ } else if (parent->prompt)
+ parentdep = parent->prompt->visible.expr;
+ else
+ parentdep = parent->dep;
+
+ for (menu = parent->list; menu; menu = menu->next) {
+ basedep = expr_transform(menu->dep);
+ basedep = expr_alloc_and(expr_copy(parentdep), basedep);
+ basedep = expr_eliminate_dups(basedep);
+ menu->dep = basedep;
+ if (menu->sym)
+ prop = menu->sym->prop;
+ else
+ prop = menu->prompt;
+ for (; prop; prop = prop->next) {
+ if (prop->menu != menu)
+ continue;
+ dep = expr_transform(prop->visible.expr);
+ dep = expr_alloc_and(expr_copy(basedep), dep);
+ dep = expr_eliminate_dups(dep);
+ if (menu->sym && menu->sym->type != S_TRISTATE)
+ dep = expr_trans_bool(dep);
+ prop->visible.expr = dep;
+ if (prop->type == P_SELECT) {
+ struct symbol *es = prop_get_symbol(prop);
+ es->rev_dep.expr = expr_alloc_or(es->rev_dep.expr,
+ expr_alloc_and(expr_alloc_symbol(menu->sym), expr_copy(dep)));
+ }
+ }
+ }
+ for (menu = parent->list; menu; menu = menu->next)
+ menu_finalize(menu);
+ } else if (sym) {
+ basedep = parent->prompt ? parent->prompt->visible.expr : NULL;
+ basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
+ basedep = expr_eliminate_dups(expr_transform(basedep));
+ last_menu = NULL;
+ for (menu = parent->next; menu; menu = menu->next) {
+ dep = menu->prompt ? menu->prompt->visible.expr : menu->dep;
+ if (!expr_contains_symbol(dep, sym))
+ break;
+ if (expr_depends_symbol(dep, sym))
+ goto next;
+ dep = expr_trans_compare(dep, E_UNEQUAL, &symbol_no);
+ dep = expr_eliminate_dups(expr_transform(dep));
+ dep2 = expr_copy(basedep);
+ expr_eliminate_eq(&dep, &dep2);
+ expr_free(dep);
+ if (!expr_is_yes(dep2)) {
+ expr_free(dep2);
+ break;
+ }
+ expr_free(dep2);
+ next:
+ menu_finalize(menu);
+ menu->parent = parent;
+ last_menu = menu;
+ }
+ if (last_menu) {
+ parent->list = parent->next;
+ parent->next = last_menu->next;
+ last_menu->next = NULL;
+ }
+ }
+ for (menu = parent->list; menu; menu = menu->next) {
+ if (sym && sym_is_choice(sym) && menu->sym) {
+ menu->sym->flags |= SYMBOL_CHOICEVAL;
+ if (!menu->prompt)
+ menu_warn(menu, "choice value must have a prompt");
+ for (prop = menu->sym->prop; prop; prop = prop->next) {
+ if (prop->type == P_PROMPT && prop->menu != menu) {
+ prop_warn(prop, "choice values "
+ "currently only support a "
+ "single prompt");
+ }
+ if (prop->type == P_DEFAULT)
+ prop_warn(prop, "defaults for choice "
+ "values not supported");
+ }
+ current_entry = menu;
+ if (menu->sym->type == S_UNKNOWN)
+ menu_set_type(sym->type);
+ /* Non-tristate choice values of tristate choices must
+ * depend on the choice being set to Y. The choice
+ * values' dependencies were propagated to their
+ * properties above, so the change here must be re-
+ * propagated. */
+ if (sym->type == S_TRISTATE && menu->sym->type != S_TRISTATE) {
+ basedep = expr_alloc_comp(E_EQUAL, sym, &symbol_yes);
+ basedep = expr_alloc_and(basedep, menu->dep);
+ basedep = expr_eliminate_dups(basedep);
+ menu->dep = basedep;
+ for (prop = menu->sym->prop; prop; prop = prop->next) {
+ if (prop->menu != menu)
+ continue;
+ dep = expr_alloc_and(expr_copy(basedep),
+ prop->visible.expr);
+ dep = expr_eliminate_dups(dep);
+ dep = expr_trans_bool(dep);
+ prop->visible.expr = dep;
+ if (prop->type == P_SELECT) {
+ struct symbol *es = prop_get_symbol(prop);
+ dep2 = expr_alloc_symbol(menu->sym);
+ dep = expr_alloc_and(dep2,
+ expr_copy(dep));
+ dep = expr_alloc_or(es->rev_dep.expr, dep);
+ dep = expr_eliminate_dups(dep);
+ es->rev_dep.expr = dep;
+ }
+ }
+ }
+ menu_add_symbol(P_CHOICE, sym, NULL);
+ prop = sym_get_choice_prop(sym);
+ for (ep = &prop->expr; *ep; ep = &(*ep)->left.expr)
+ ;
+ *ep = expr_alloc_one(E_LIST, NULL);
+ (*ep)->right.sym = menu->sym;
+ }
+ if (menu->list && (!menu->prompt || !menu->prompt->text)) {
+ for (last_menu = menu->list; ; last_menu = last_menu->next) {
+ last_menu->parent = parent;
+ if (!last_menu->next)
+ break;
+ }
+ last_menu->next = menu->next;
+ menu->next = menu->list;
+ menu->list = NULL;
+ }
+ }
+
+ if (sym && !(sym->flags & SYMBOL_WARNED)) {
+ if (sym->type == S_UNKNOWN)
+ menu_warn(parent, "config symbol defined without type");
+
+ if (sym_is_choice(sym) && !parent->prompt)
+ menu_warn(parent, "choice must have a prompt");
+
+ /* Check properties connected to this symbol */
+ sym_check_prop(sym);
+ sym->flags |= SYMBOL_WARNED;
+ }
+
+ if (sym && !sym_is_optional(sym) && parent->prompt) {
+ sym->rev_dep.expr = expr_alloc_or(sym->rev_dep.expr,
+ expr_alloc_and(parent->prompt->visible.expr,
+ expr_alloc_symbol(&symbol_mod)));
+ }
+}
+
+bool menu_is_visible(struct menu *menu)
+{
+ struct menu *child;
+ struct symbol *sym;
+ tristate visible;
+
+ if (!menu->prompt)
+ return false;
+ sym = menu->sym;
+ if (sym) {
+ sym_calc_value(sym);
+ visible = menu->prompt->visible.tri;
+ } else
+ visible = menu->prompt->visible.tri = expr_calc_value(menu->prompt->visible.expr);
+
+ if (visible != no)
+ return true;
+ if (!sym || sym_get_tristate_value(menu->sym) == no)
+ return false;
+
+ for (child = menu->list; child; child = child->next)
+ if (menu_is_visible(child))
+ return true;
+ return false;
+}
+
+const char *menu_get_prompt(struct menu *menu)
+{
+ if (menu->prompt)
+ return menu->prompt->text;
+ else if (menu->sym)
+ return menu->sym->name;
+ return NULL;
+}
+
+struct menu *menu_get_root_menu(struct menu *menu)
+{
+ return &rootmenu;
+}
+
+struct menu *menu_get_parent_menu(struct menu *menu)
+{
+ enum prop_type type;
+
+ for (; menu != &rootmenu; menu = menu->parent) {
+ type = menu->prompt ? menu->prompt->type : 0;
+ if (type == P_MENU)
+ break;
+ }
+ return menu;
+}
+
+bool menu_has_help(struct menu *menu)
+{
+ return menu->help != NULL;
+}
+
+const char *menu_get_help(struct menu *menu)
+{
+ if (menu->help)
+ return menu->help;
+ else
+ return "";
+}
diff --git a/util/kconfig/qconf.cc b/util/kconfig/qconf.cc
new file mode 100644
index 0000000..5ec3163
--- /dev/null
+++ b/util/kconfig/qconf.cc
@@ -0,0 +1,1764 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <qapplication.h>
+#include <qmainwindow.h>
+#include <qtoolbar.h>
+#include <qlayout.h>
+#include <qvbox.h>
+#include <qsplitter.h>
+#include <qlistview.h>
+#include <qtextbrowser.h>
+#include <qlineedit.h>
+#include <qlabel.h>
+#include <qpushbutton.h>
+#include <qmenubar.h>
+#include <qmessagebox.h>
+#include <qaction.h>
+#include <qheader.h>
+#include <qfiledialog.h>
+#include <qdragobject.h>
+#include <qregexp.h>
+
+#include <stdlib.h>
+
+#include "lkc.h"
+#include "qconf.h"
+
+#include "qconf.moc"
+#include "images.c"
+
+#ifdef _
+# undef _
+# define _ qgettext
+#endif
+
+static QApplication *configApp;
+static ConfigSettings *configSettings;
+
+QAction *ConfigMainWindow::saveAction;
+
+static inline QString qgettext(const char* str)
+{
+ return QString::fromLocal8Bit(gettext(str));
+}
+
+static inline QString qgettext(const QString& str)
+{
+ return QString::fromLocal8Bit(gettext(str.latin1()));
+}
+
+/**
+ * Reads a list of integer values from the application settings.
+ */
+QValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
+{
+ QValueList<int> result;
+ QStringList entryList = readListEntry(key, ok);
+ if (ok) {
+ QStringList::Iterator it;
+ for (it = entryList.begin(); it != entryList.end(); ++it)
+ result.push_back((*it).toInt());
+ }
+
+ return result;
+}
+
+/**
+ * Writes a list of integer values to the application settings.
+ */
+bool ConfigSettings::writeSizes(const QString& key, const QValueList<int>& value)
+{
+ QStringList stringList;
+ QValueList<int>::ConstIterator it;
+
+ for (it = value.begin(); it != value.end(); ++it)
+ stringList.push_back(QString::number(*it));
+ return writeEntry(key, stringList);
+}
+
+
+#if QT_VERSION >= 300
+/*
+ * set the new data
+ * TODO check the value
+ */
+void ConfigItem::okRename(int col)
+{
+ Parent::okRename(col);
+ sym_set_string_value(menu->sym, text(dataColIdx).latin1());
+ listView()->updateList(this);
+}
+#endif
+
+/*
+ * update the displayed of a menu entry
+ */
+void ConfigItem::updateMenu(void)
+{
+ ConfigList* list;
+ struct symbol* sym;
+ struct property *prop;
+ QString prompt;
+ int type;
+ tristate expr;
+
+ list = listView();
+ if (goParent) {
+ setPixmap(promptColIdx, list->menuBackPix);
+ prompt = "..";
+ goto set_prompt;
+ }
+
+ sym = menu->sym;
+ prop = menu->prompt;
+ prompt = _(menu_get_prompt(menu));
+
+ if (prop) switch (prop->type) {
+ case P_MENU:
+ if (list->mode == singleMode || list->mode == symbolMode) {
+ /* a menuconfig entry is displayed differently
+ * depending whether it's at the view root or a child.
+ */
+ if (sym && list->rootEntry == menu)
+ break;
+ setPixmap(promptColIdx, list->menuPix);
+ } else {
+ if (sym)
+ break;
+ setPixmap(promptColIdx, 0);
+ }
+ goto set_prompt;
+ case P_COMMENT:
+ setPixmap(promptColIdx, 0);
+ goto set_prompt;
+ default:
+ ;
+ }
+ if (!sym)
+ goto set_prompt;
+
+ setText(nameColIdx, QString::fromLocal8Bit(sym->name));
+
+ type = sym_get_type(sym);
+ switch (type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ char ch;
+
+ if (!sym_is_changable(sym) && !list->showAll) {
+ setPixmap(promptColIdx, 0);
+ setText(noColIdx, QString::null);
+ setText(modColIdx, QString::null);
+ setText(yesColIdx, QString::null);
+ break;
+ }
+ expr = sym_get_tristate_value(sym);
+ switch (expr) {
+ case yes:
+ if (sym_is_choice_value(sym) && type == S_BOOLEAN)
+ setPixmap(promptColIdx, list->choiceYesPix);
+ else
+ setPixmap(promptColIdx, list->symbolYesPix);
+ setText(yesColIdx, "Y");
+ ch = 'Y';
+ break;
+ case mod:
+ setPixmap(promptColIdx, list->symbolModPix);
+ setText(modColIdx, "M");
+ ch = 'M';
+ break;
+ default:
+ if (sym_is_choice_value(sym) && type == S_BOOLEAN)
+ setPixmap(promptColIdx, list->choiceNoPix);
+ else
+ setPixmap(promptColIdx, list->symbolNoPix);
+ setText(noColIdx, "N");
+ ch = 'N';
+ break;
+ }
+ if (expr != no)
+ setText(noColIdx, sym_tristate_within_range(sym, no) ? "_" : 0);
+ if (expr != mod)
+ setText(modColIdx, sym_tristate_within_range(sym, mod) ? "_" : 0);
+ if (expr != yes)
+ setText(yesColIdx, sym_tristate_within_range(sym, yes) ? "_" : 0);
+
+ setText(dataColIdx, QChar(ch));
+ break;
+ case S_INT:
+ case S_HEX:
+ case S_STRING:
+ const char* data;
+
+ data = sym_get_string_value(sym);
+
+#if QT_VERSION >= 300
+ int i = list->mapIdx(dataColIdx);
+ if (i >= 0)
+ setRenameEnabled(i, TRUE);
+#endif
+ setText(dataColIdx, data);
+ if (type == S_STRING)
+ prompt = QString("%1: %2").arg(prompt).arg(data);
+ else
+ prompt = QString("(%2) %1").arg(prompt).arg(data);
+ break;
+ }
+ if (!sym_has_value(sym) && visible)
+ prompt += _(" (NEW)");
+set_prompt:
+ setText(promptColIdx, prompt);
+}
+
+void ConfigItem::testUpdateMenu(bool v)
+{
+ ConfigItem* i;
+
+ visible = v;
+ if (!menu)
+ return;
+
+ sym_calc_value(menu->sym);
+ if (menu->flags & MENU_CHANGED) {
+ /* the menu entry changed, so update all list items */
+ menu->flags &= ~MENU_CHANGED;
+ for (i = (ConfigItem*)menu->data; i; i = i->nextItem)
+ i->updateMenu();
+ } else if (listView()->updateAll)
+ updateMenu();
+}
+
+void ConfigItem::paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align)
+{
+ ConfigList* list = listView();
+
+ if (visible) {
+ if (isSelected() && !list->hasFocus() && list->mode == menuMode)
+ Parent::paintCell(p, list->inactivedColorGroup, column, width, align);
+ else
+ Parent::paintCell(p, cg, column, width, align);
+ } else
+ Parent::paintCell(p, list->disabledColorGroup, column, width, align);
+}
+
+/*
+ * construct a menu entry
+ */
+void ConfigItem::init(void)
+{
+ if (menu) {
+ ConfigList* list = listView();
+ nextItem = (ConfigItem*)menu->data;
+ menu->data = this;
+
+ if (list->mode != fullMode)
+ setOpen(TRUE);
+ sym_calc_value(menu->sym);
+ }
+ updateMenu();
+}
+
+/*
+ * destruct a menu entry
+ */
+ConfigItem::~ConfigItem(void)
+{
+ if (menu) {
+ ConfigItem** ip = (ConfigItem**)&menu->data;
+ for (; *ip; ip = &(*ip)->nextItem) {
+ if (*ip == this) {
+ *ip = nextItem;
+ break;
+ }
+ }
+ }
+}
+
+ConfigLineEdit::ConfigLineEdit(ConfigView* parent)
+ : Parent(parent)
+{
+ connect(this, SIGNAL(lostFocus()), SLOT(hide()));
+}
+
+void ConfigLineEdit::show(ConfigItem* i)
+{
+ item = i;
+ if (sym_get_string_value(item->menu->sym))
+ setText(QString::fromLocal8Bit(sym_get_string_value(item->menu->sym)));
+ else
+ setText(QString::null);
+ Parent::show();
+ setFocus();
+}
+
+void ConfigLineEdit::keyPressEvent(QKeyEvent* e)
+{
+ switch (e->key()) {
+ case Key_Escape:
+ break;
+ case Key_Return:
+ case Key_Enter:
+ sym_set_string_value(item->menu->sym, text().latin1());
+ parent()->updateList(item);
+ break;
+ default:
+ Parent::keyPressEvent(e);
+ return;
+ }
+ e->accept();
+ parent()->list->setFocus();
+ hide();
+}
+
+ConfigList::ConfigList(ConfigView* p, const char *name)
+ : Parent(p, name),
+ updateAll(false),
+ symbolYesPix(xpm_symbol_yes), symbolModPix(xpm_symbol_mod), symbolNoPix(xpm_symbol_no),
+ choiceYesPix(xpm_choice_yes), choiceNoPix(xpm_choice_no),
+ menuPix(xpm_menu), menuInvPix(xpm_menu_inv), menuBackPix(xpm_menuback), voidPix(xpm_void),
+ showAll(false), showName(false), showRange(false), showData(false),
+ rootEntry(0), headerPopup(0)
+{
+ int i;
+
+ setSorting(-1);
+ setRootIsDecorated(TRUE);
+ disabledColorGroup = palette().active();
+ disabledColorGroup.setColor(QColorGroup::Text, palette().disabled().text());
+ inactivedColorGroup = palette().active();
+ inactivedColorGroup.setColor(QColorGroup::Highlight, palette().disabled().highlight());
+
+ connect(this, SIGNAL(selectionChanged(void)),
+ SLOT(updateSelection(void)));
+
+ if (name) {
+ configSettings->beginGroup(name);
+ showAll = configSettings->readBoolEntry("/showAll", false);
+ showName = configSettings->readBoolEntry("/showName", false);
+ showRange = configSettings->readBoolEntry("/showRange", false);
+ showData = configSettings->readBoolEntry("/showData", false);
+ configSettings->endGroup();
+ connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
+ }
+
+ for (i = 0; i < colNr; i++)
+ colMap[i] = colRevMap[i] = -1;
+ addColumn(promptColIdx, _("Option"));
+
+ reinit();
+}
+
+void ConfigList::reinit(void)
+{
+ removeColumn(dataColIdx);
+ removeColumn(yesColIdx);
+ removeColumn(modColIdx);
+ removeColumn(noColIdx);
+ removeColumn(nameColIdx);
+
+ if (showName)
+ addColumn(nameColIdx, _("Name"));
+ if (showRange) {
+ addColumn(noColIdx, "N");
+ addColumn(modColIdx, "M");
+ addColumn(yesColIdx, "Y");
+ }
+ if (showData)
+ addColumn(dataColIdx, _("Value"));
+
+ updateListAll();
+}
+
+void ConfigList::saveSettings(void)
+{
+ if (name()) {
+ configSettings->beginGroup(name());
+ configSettings->writeEntry("/showName", showName);
+ configSettings->writeEntry("/showRange", showRange);
+ configSettings->writeEntry("/showData", showData);
+ configSettings->writeEntry("/showAll", showAll);
+ configSettings->endGroup();
+ }
+}
+
+ConfigItem* ConfigList::findConfigItem(struct menu *menu)
+{
+ ConfigItem* item = (ConfigItem*)menu->data;
+
+ for (; item; item = item->nextItem) {
+ if (this == item->listView())
+ break;
+ }
+
+ return item;
+}
+
+void ConfigList::updateSelection(void)
+{
+ struct menu *menu;
+ enum prop_type type;
+
+ ConfigItem* item = (ConfigItem*)selectedItem();
+ if (!item)
+ return;
+
+ menu = item->menu;
+ emit menuChanged(menu);
+ if (!menu)
+ return;
+ type = menu->prompt ? menu->prompt->type : P_UNKNOWN;
+ if (mode == menuMode && type == P_MENU)
+ emit menuSelected(menu);
+}
+
+void ConfigList::updateList(ConfigItem* item)
+{
+ ConfigItem* last = 0;
+
+ if (!rootEntry) {
+ if (mode != listMode)
+ goto update;
+ QListViewItemIterator it(this);
+ ConfigItem* item;
+
+ for (; it.current(); ++it) {
+ item = (ConfigItem*)it.current();
+ if (!item->menu)
+ continue;
+ item->testUpdateMenu(menu_is_visible(item->menu));
+ }
+ return;
+ }
+
+ if (rootEntry != &rootmenu && (mode == singleMode ||
+ (mode == symbolMode && rootEntry->parent != &rootmenu))) {
+ item = firstChild();
+ if (!item)
+ item = new ConfigItem(this, 0, true);
+ last = item;
+ }
+ if ((mode == singleMode || (mode == symbolMode && !(rootEntry->flags & MENU_ROOT))) &&
+ rootEntry->sym && rootEntry->prompt) {
+ item = last ? last->nextSibling() : firstChild();
+ if (!item)
+ item = new ConfigItem(this, last, rootEntry, true);
+ else
+ item->testUpdateMenu(true);
+
+ updateMenuList(item, rootEntry);
+ triggerUpdate();
+ return;
+ }
+update:
+ updateMenuList(this, rootEntry);
+ triggerUpdate();
+}
+
+void ConfigList::setValue(ConfigItem* item, tristate val)
+{
+ struct symbol* sym;
+ int type;
+ tristate oldval;
+
+ sym = item->menu ? item->menu->sym : 0;
+ if (!sym)
+ return;
+
+ type = sym_get_type(sym);
+ switch (type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ oldval = sym_get_tristate_value(sym);
+
+ if (!sym_set_tristate_value(sym, val))
+ return;
+ if (oldval == no && item->menu->list)
+ item->setOpen(TRUE);
+ parent()->updateList(item);
+ break;
+ }
+}
+
+void ConfigList::changeValue(ConfigItem* item)
+{
+ struct symbol* sym;
+ struct menu* menu;
+ int type, oldexpr, newexpr;
+
+ menu = item->menu;
+ if (!menu)
+ return;
+ sym = menu->sym;
+ if (!sym) {
+ if (item->menu->list)
+ item->setOpen(!item->isOpen());
+ return;
+ }
+
+ type = sym_get_type(sym);
+ switch (type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ oldexpr = sym_get_tristate_value(sym);
+ newexpr = sym_toggle_tristate_value(sym);
+ if (item->menu->list) {
+ if (oldexpr == newexpr)
+ item->setOpen(!item->isOpen());
+ else if (oldexpr == no)
+ item->setOpen(TRUE);
+ }
+ if (oldexpr != newexpr)
+ parent()->updateList(item);
+ break;
+ case S_INT:
+ case S_HEX:
+ case S_STRING:
+#if QT_VERSION >= 300
+ if (colMap[dataColIdx] >= 0)
+ item->startRename(colMap[dataColIdx]);
+ else
+#endif
+ parent()->lineEdit->show(item);
+ break;
+ }
+}
+
+void ConfigList::setRootMenu(struct menu *menu)
+{
+ enum prop_type type;
+
+ if (rootEntry == menu)
+ return;
+ type = menu && menu->prompt ? menu->prompt->type : P_UNKNOWN;
+ if (type != P_MENU)
+ return;
+ updateMenuList(this, 0);
+ rootEntry = menu;
+ updateListAll();
+ setSelected(currentItem(), hasFocus());
+ ensureItemVisible(currentItem());
+}
+
+void ConfigList::setParentMenu(void)
+{
+ ConfigItem* item;
+ struct menu *oldroot;
+
+ oldroot = rootEntry;
+ if (rootEntry == &rootmenu)
+ return;
+ setRootMenu(menu_get_parent_menu(rootEntry->parent));
+
+ QListViewItemIterator it(this);
+ for (; (item = (ConfigItem*)it.current()); it++) {
+ if (item->menu == oldroot) {
+ setCurrentItem(item);
+ ensureItemVisible(item);
+ break;
+ }
+ }
+}
+
+/*
+ * update all the children of a menu entry
+ * removes/adds the entries from the parent widget as necessary
+ *
+ * parent: either the menu list widget or a menu entry widget
+ * menu: entry to be updated
+ */
+template <class P>
+void ConfigList::updateMenuList(P* parent, struct menu* menu)
+{
+ struct menu* child;
+ ConfigItem* item;
+ ConfigItem* last;
+ bool visible;
+ enum prop_type type;
+
+ if (!menu) {
+ while ((item = parent->firstChild()))
+ delete item;
+ return;
+ }
+
+ last = parent->firstChild();
+ if (last && !last->goParent)
+ last = 0;
+ for (child = menu->list; child; child = child->next) {
+ item = last ? last->nextSibling() : parent->firstChild();
+ type = child->prompt ? child->prompt->type : P_UNKNOWN;
+
+ switch (mode) {
+ case menuMode:
+ if (!(child->flags & MENU_ROOT))
+ goto hide;
+ break;
+ case symbolMode:
+ if (child->flags & MENU_ROOT)
+ goto hide;
+ break;
+ default:
+ break;
+ }
+
+ visible = menu_is_visible(child);
+ if (showAll || visible) {
+ if (!child->sym && !child->list && !child->prompt)
+ continue;
+ if (!item || item->menu != child)
+ item = new ConfigItem(parent, last, child, visible);
+ else
+ item->testUpdateMenu(visible);
+
+ if (mode == fullMode || mode == menuMode || type != P_MENU)
+ updateMenuList(item, child);
+ else
+ updateMenuList(item, 0);
+ last = item;
+ continue;
+ }
+ hide:
+ if (item && item->menu == child) {
+ last = parent->firstChild();
+ if (last == item)
+ last = 0;
+ else while (last->nextSibling() != item)
+ last = last->nextSibling();
+ delete item;
+ }
+ }
+}
+
+void ConfigList::keyPressEvent(QKeyEvent* ev)
+{
+ QListViewItem* i = currentItem();
+ ConfigItem* item;
+ struct menu *menu;
+ enum prop_type type;
+
+ if (ev->key() == Key_Escape && mode != fullMode && mode != listMode) {
+ emit parentSelected();
+ ev->accept();
+ return;
+ }
+
+ if (!i) {
+ Parent::keyPressEvent(ev);
+ return;
+ }
+ item = (ConfigItem*)i;
+
+ switch (ev->key()) {
+ case Key_Return:
+ case Key_Enter:
+ if (item->goParent) {
+ emit parentSelected();
+ break;
+ }
+ menu = item->menu;
+ if (!menu)
+ break;
+ type = menu->prompt ? menu->prompt->type : P_UNKNOWN;
+ if (type == P_MENU && rootEntry != menu &&
+ mode != fullMode && mode != menuMode) {
+ emit menuSelected(menu);
+ break;
+ }
+ case Key_Space:
+ changeValue(item);
+ break;
+ case Key_N:
+ setValue(item, no);
+ break;
+ case Key_M:
+ setValue(item, mod);
+ break;
+ case Key_Y:
+ setValue(item, yes);
+ break;
+ default:
+ Parent::keyPressEvent(ev);
+ return;
+ }
+ ev->accept();
+}
+
+void ConfigList::contentsMousePressEvent(QMouseEvent* e)
+{
+ //QPoint p(contentsToViewport(e->pos()));
+ //printf("contentsMousePressEvent: %d,%d\n", p.x(), p.y());
+ Parent::contentsMousePressEvent(e);
+}
+
+void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e)
+{
+ QPoint p(contentsToViewport(e->pos()));
+ ConfigItem* item = (ConfigItem*)itemAt(p);
+ struct menu *menu;
+ enum prop_type ptype;
+ const QPixmap* pm;
+ int idx, x;
+
+ if (!item)
+ goto skip;
+
+ menu = item->menu;
+ x = header()->offset() + p.x();
+ idx = colRevMap[header()->sectionAt(x)];
+ switch (idx) {
+ case promptColIdx:
+ pm = item->pixmap(promptColIdx);
+ if (pm) {
+ int off = header()->sectionPos(0) + itemMargin() +
+ treeStepSize() * (item->depth() + (rootIsDecorated() ? 1 : 0));
+ if (x >= off && x < off + pm->width()) {
+ if (item->goParent) {
+ emit parentSelected();
+ break;
+ } else if (!menu)
+ break;
+ ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN;
+ if (ptype == P_MENU && rootEntry != menu &&
+ mode != fullMode && mode != menuMode)
+ emit menuSelected(menu);
+ else
+ changeValue(item);
+ }
+ }
+ break;
+ case noColIdx:
+ setValue(item, no);
+ break;
+ case modColIdx:
+ setValue(item, mod);
+ break;
+ case yesColIdx:
+ setValue(item, yes);
+ break;
+ case dataColIdx:
+ changeValue(item);
+ break;
+ }
+
+skip:
+ //printf("contentsMouseReleaseEvent: %d,%d\n", p.x(), p.y());
+ Parent::contentsMouseReleaseEvent(e);
+}
+
+void ConfigList::contentsMouseMoveEvent(QMouseEvent* e)
+{
+ //QPoint p(contentsToViewport(e->pos()));
+ //printf("contentsMouseMoveEvent: %d,%d\n", p.x(), p.y());
+ Parent::contentsMouseMoveEvent(e);
+}
+
+void ConfigList::contentsMouseDoubleClickEvent(QMouseEvent* e)
+{
+ QPoint p(contentsToViewport(e->pos()));
+ ConfigItem* item = (ConfigItem*)itemAt(p);
+ struct menu *menu;
+ enum prop_type ptype;
+
+ if (!item)
+ goto skip;
+ if (item->goParent) {
+ emit parentSelected();
+ goto skip;
+ }
+ menu = item->menu;
+ if (!menu)
+ goto skip;
+ ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN;
+ if (ptype == P_MENU && (mode == singleMode || mode == symbolMode))
+ emit menuSelected(menu);
+ else if (menu->sym)
+ changeValue(item);
+
+skip:
+ //printf("contentsMouseDoubleClickEvent: %d,%d\n", p.x(), p.y());
+ Parent::contentsMouseDoubleClickEvent(e);
+}
+
+void ConfigList::focusInEvent(QFocusEvent *e)
+{
+ struct menu *menu = NULL;
+
+ Parent::focusInEvent(e);
+
+ ConfigItem* item = (ConfigItem *)currentItem();
+ if (item) {
+ setSelected(item, TRUE);
+ menu = item->menu;
+ }
+ emit gotFocus(menu);
+}
+
+void ConfigList::contextMenuEvent(QContextMenuEvent *e)
+{
+ if (e->y() <= header()->geometry().bottom()) {
+ if (!headerPopup) {
+ QAction *action;
+
+ headerPopup = new QPopupMenu(this);
+ action = new QAction(NULL, _("Show Name"), 0, this);
+ action->setToggleAction(TRUE);
+ connect(action, SIGNAL(toggled(bool)),
+ parent(), SLOT(setShowName(bool)));
+ connect(parent(), SIGNAL(showNameChanged(bool)),
+ action, SLOT(setOn(bool)));
+ action->setOn(showName);
+ action->addTo(headerPopup);
+ action = new QAction(NULL, _("Show Range"), 0, this);
+ action->setToggleAction(TRUE);
+ connect(action, SIGNAL(toggled(bool)),
+ parent(), SLOT(setShowRange(bool)));
+ connect(parent(), SIGNAL(showRangeChanged(bool)),
+ action, SLOT(setOn(bool)));
+ action->setOn(showRange);
+ action->addTo(headerPopup);
+ action = new QAction(NULL, _("Show Data"), 0, this);
+ action->setToggleAction(TRUE);
+ connect(action, SIGNAL(toggled(bool)),
+ parent(), SLOT(setShowData(bool)));
+ connect(parent(), SIGNAL(showDataChanged(bool)),
+ action, SLOT(setOn(bool)));
+ action->setOn(showData);
+ action->addTo(headerPopup);
+ }
+ headerPopup->exec(e->globalPos());
+ e->accept();
+ } else
+ e->ignore();
+}
+
+ConfigView* ConfigView::viewList;
+
+ConfigView::ConfigView(QWidget* parent, const char *name)
+ : Parent(parent, name)
+{
+ list = new ConfigList(this, name);
+ lineEdit = new ConfigLineEdit(this);
+ lineEdit->hide();
+
+ this->nextView = viewList;
+ viewList = this;
+}
+
+ConfigView::~ConfigView(void)
+{
+ ConfigView** vp;
+
+ for (vp = &viewList; *vp; vp = &(*vp)->nextView) {
+ if (*vp == this) {
+ *vp = nextView;
+ break;
+ }
+ }
+}
+
+void ConfigView::setShowAll(bool b)
+{
+ if (list->showAll != b) {
+ list->showAll = b;
+ list->updateListAll();
+ emit showAllChanged(b);
+ }
+}
+
+void ConfigView::setShowName(bool b)
+{
+ if (list->showName != b) {
+ list->showName = b;
+ list->reinit();
+ emit showNameChanged(b);
+ }
+}
+
+void ConfigView::setShowRange(bool b)
+{
+ if (list->showRange != b) {
+ list->showRange = b;
+ list->reinit();
+ emit showRangeChanged(b);
+ }
+}
+
+void ConfigView::setShowData(bool b)
+{
+ if (list->showData != b) {
+ list->showData = b;
+ list->reinit();
+ emit showDataChanged(b);
+ }
+}
+
+void ConfigList::setAllOpen(bool open)
+{
+ QListViewItemIterator it(this);
+
+ for (; it.current(); it++)
+ it.current()->setOpen(open);
+}
+
+void ConfigView::updateList(ConfigItem* item)
+{
+ ConfigView* v;
+
+ for (v = viewList; v; v = v->nextView)
+ v->list->updateList(item);
+}
+
+void ConfigView::updateListAll(void)
+{
+ ConfigView* v;
+
+ for (v = viewList; v; v = v->nextView)
+ v->list->updateListAll();
+}
+
+ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
+ : Parent(parent, name), menu(0), sym(0)
+{
+ if (name) {
+ configSettings->beginGroup(name);
+ _showDebug = configSettings->readBoolEntry("/showDebug", false);
+ configSettings->endGroup();
+ connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
+ }
+}
+
+void ConfigInfoView::saveSettings(void)
+{
+ if (name()) {
+ configSettings->beginGroup(name());
+ configSettings->writeEntry("/showDebug", showDebug());
+ configSettings->endGroup();
+ }
+}
+
+void ConfigInfoView::setShowDebug(bool b)
+{
+ if (_showDebug != b) {
+ _showDebug = b;
+ if (menu)
+ menuInfo();
+ else if (sym)
+ symbolInfo();
+ emit showDebugChanged(b);
+ }
+}
+
+void ConfigInfoView::setInfo(struct menu *m)
+{
+ if (menu == m)
+ return;
+ menu = m;
+ sym = NULL;
+ if (!menu)
+ clear();
+ else
+ menuInfo();
+}
+
+void ConfigInfoView::setSource(const QString& name)
+{
+ const char *p = name.latin1();
+
+ menu = NULL;
+ sym = NULL;
+
+ switch (p[0]) {
+ case 'm':
+ struct menu *m;
+
+ if (sscanf(p, "m%p", &m) == 1 && menu != m) {
+ menu = m;
+ menuInfo();
+ emit menuSelected(menu);
+ }
+ break;
+ case 's':
+ struct symbol *s;
+
+ if (sscanf(p, "s%p", &s) == 1 && sym != s) {
+ sym = s;
+ symbolInfo();
+ }
+ break;
+ }
+}
+
+void ConfigInfoView::symbolInfo(void)
+{
+ QString str;
+
+ str += "<big>Symbol: <b>";
+ str += print_filter(sym->name);
+ str += "</b></big><br><br>value: ";
+ str += print_filter(sym_get_string_value(sym));
+ str += "<br>visibility: ";
+ str += sym->visible == yes ? "y" : sym->visible == mod ? "m" : "n";
+ str += "<br>";
+ str += debug_info(sym);
+
+ setText(str);
+}
+
+void ConfigInfoView::menuInfo(void)
+{
+ struct symbol* sym;
+ QString head, debug, help;
+
+ sym = menu->sym;
+ if (sym) {
+ if (menu->prompt) {
+ head += "<big><b>";
+ head += print_filter(_(menu->prompt->text));
+ head += "</b></big>";
+ if (sym->name) {
+ head += " (";
+ if (showDebug())
+ head += QString().sprintf("<a href=\"s%p\">", sym);
+ head += print_filter(sym->name);
+ if (showDebug())
+ head += "</a>";
+ head += ")";
+ }
+ } else if (sym->name) {
+ head += "<big><b>";
+ if (showDebug())
+ head += QString().sprintf("<a href=\"s%p\">", sym);
+ head += print_filter(sym->name);
+ if (showDebug())
+ head += "</a>";
+ head += "</b></big>";
+ }
+ head += "<br><br>";
+
+ if (showDebug())
+ debug = debug_info(sym);
+
+ help = menu_get_help(menu);
+ /* Gettextize if the help text not empty */
+ if (help.isEmpty())
+ help = print_filter(menu_get_help(menu));
+ else
+ help = print_filter(_(menu_get_help(menu)));
+ } else if (menu->prompt) {
+ head += "<big><b>";
+ head += print_filter(_(menu->prompt->text));
+ head += "</b></big><br><br>";
+ if (showDebug()) {
+ if (menu->prompt->visible.expr) {
+ debug += " dep: ";
+ expr_print(menu->prompt->visible.expr, expr_print_help, &debug, E_NONE);
+ debug += "<br><br>";
+ }
+ }
+ }
+ if (showDebug())
+ debug += QString().sprintf("defined at %s:%d<br><br>", menu->file->name, menu->lineno);
+
+ setText(head + debug + help);
+}
+
+QString ConfigInfoView::debug_info(struct symbol *sym)
+{
+ QString debug;
+
+ debug += "type: ";
+ debug += print_filter(sym_type_name(sym->type));
+ if (sym_is_choice(sym))
+ debug += " (choice)";
+ debug += "<br>";
+ if (sym->rev_dep.expr) {
+ debug += "reverse dep: ";
+ expr_print(sym->rev_dep.expr, expr_print_help, &debug, E_NONE);
+ debug += "<br>";
+ }
+ for (struct property *prop = sym->prop; prop; prop = prop->next) {
+ switch (prop->type) {
+ case P_PROMPT:
+ case P_MENU:
+ debug += QString().sprintf("prompt: <a href=\"m%p\">", prop->menu);
+ debug += print_filter(_(prop->text));
+ debug += "</a><br>";
+ break;
+ case P_DEFAULT:
+ case P_SELECT:
+ case P_RANGE:
+ case P_ENV:
+ debug += prop_get_type_name(prop->type);
+ debug += ": ";
+ expr_print(prop->expr, expr_print_help, &debug, E_NONE);
+ debug += "<br>";
+ break;
+ case P_CHOICE:
+ if (sym_is_choice(sym)) {
+ debug += "choice: ";
+ expr_print(prop->expr, expr_print_help, &debug, E_NONE);
+ debug += "<br>";
+ }
+ break;
+ default:
+ debug += "unknown property: ";
+ debug += prop_get_type_name(prop->type);
+ debug += "<br>";
+ }
+ if (prop->visible.expr) {
+ debug += " dep: ";
+ expr_print(prop->visible.expr, expr_print_help, &debug, E_NONE);
+ debug += "<br>";
+ }
+ }
+ debug += "<br>";
+
+ return debug;
+}
+
+QString ConfigInfoView::print_filter(const QString &str)
+{
+ QRegExp re("[<>&\"\\n]");
+ QString res = str;
+ for (int i = 0; (i = res.find(re, i)) >= 0;) {
+ switch (res[i].latin1()) {
+ case '<':
+ res.replace(i, 1, "<");
+ i += 4;
+ break;
+ case '>':
+ res.replace(i, 1, ">");
+ i += 4;
+ break;
+ case '&':
+ res.replace(i, 1, "&");
+ i += 5;
+ break;
+ case '"':
+ res.replace(i, 1, """);
+ i += 6;
+ break;
+ case '\n':
+ res.replace(i, 1, "<br>");
+ i += 4;
+ break;
+ }
+ }
+ return res;
+}
+
+void ConfigInfoView::expr_print_help(void *data, struct symbol *sym, const char *str)
+{
+ QString* text = reinterpret_cast<QString*>(data);
+ QString str2 = print_filter(str);
+
+ if (sym && sym->name && !(sym->flags & SYMBOL_CONST)) {
+ *text += QString().sprintf("<a href=\"s%p\">", sym);
+ *text += str2;
+ *text += "</a>";
+ } else
+ *text += str2;
+}
+
+QPopupMenu* ConfigInfoView::createPopupMenu(const QPoint& pos)
+{
+ QPopupMenu* popup = Parent::createPopupMenu(pos);
+ QAction* action = new QAction(NULL, _("Show Debug Info"), 0, popup);
+ action->setToggleAction(TRUE);
+ connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
+ connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
+ action->setOn(showDebug());
+ popup->insertSeparator();
+ action->addTo(popup);
+ return popup;
+}
+
+void ConfigInfoView::contentsContextMenuEvent(QContextMenuEvent *e)
+{
+ Parent::contentsContextMenuEvent(e);
+}
+
+ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *name)
+ : Parent(parent, name), result(NULL)
+{
+ setCaption("Search Config");
+
+ QVBoxLayout* layout1 = new QVBoxLayout(this, 11, 6);
+ QHBoxLayout* layout2 = new QHBoxLayout(0, 0, 6);
+ layout2->addWidget(new QLabel(_("Find:"), this));
+ editField = new QLineEdit(this);
+ connect(editField, SIGNAL(returnPressed()), SLOT(search()));
+ layout2->addWidget(editField);
+ searchButton = new QPushButton(_("Search"), this);
+ searchButton->setAutoDefault(FALSE);
+ connect(searchButton, SIGNAL(clicked()), SLOT(search()));
+ layout2->addWidget(searchButton);
+ layout1->addLayout(layout2);
+
+ split = new QSplitter(this);
+ split->setOrientation(QSplitter::Vertical);
+ list = new ConfigView(split, name);
+ list->list->mode = listMode;
+ info = new ConfigInfoView(split, name);
+ connect(list->list, SIGNAL(menuChanged(struct menu *)),
+ info, SLOT(setInfo(struct menu *)));
+ connect(list->list, SIGNAL(menuChanged(struct menu *)),
+ parent, SLOT(setMenuLink(struct menu *)));
+
+ layout1->addWidget(split);
+
+ if (name) {
+ int x, y, width, height;
+ bool ok;
+
+ configSettings->beginGroup(name);
+ width = configSettings->readNumEntry("/window width", parent->width() / 2);
+ height = configSettings->readNumEntry("/window height", parent->height() / 2);
+ resize(width, height);
+ x = configSettings->readNumEntry("/window x", 0, &ok);
+ if (ok)
+ y = configSettings->readNumEntry("/window y", 0, &ok);
+ if (ok)
+ move(x, y);
+ QValueList<int> sizes = configSettings->readSizes("/split", &ok);
+ if (ok)
+ split->setSizes(sizes);
+ configSettings->endGroup();
+ connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
+ }
+}
+
+void ConfigSearchWindow::saveSettings(void)
+{
+ if (name()) {
+ configSettings->beginGroup(name());
+ configSettings->writeEntry("/window x", pos().x());
+ configSettings->writeEntry("/window y", pos().y());
+ configSettings->writeEntry("/window width", size().width());
+ configSettings->writeEntry("/window height", size().height());
+ configSettings->writeSizes("/split", split->sizes());
+ configSettings->endGroup();
+ }
+}
+
+void ConfigSearchWindow::search(void)
+{
+ struct symbol **p;
+ struct property *prop;
+ ConfigItem *lastItem = NULL;
+
+ free(result);
+ list->list->clear();
+ info->clear();
+
+ result = sym_re_search(editField->text().latin1());
+ if (!result)
+ return;
+ for (p = result; *p; p++) {
+ for_all_prompts((*p), prop)
+ lastItem = new ConfigItem(list->list, lastItem, prop->menu,
+ menu_is_visible(prop->menu));
+ }
+}
+
+/*
+ * Construct the complete config widget
+ */
+ConfigMainWindow::ConfigMainWindow(void)
+ : searchWindow(0)
+{
+ QMenuBar* menu;
+ bool ok;
+ int x, y, width, height;
+ char title[256];
+
+ QWidget *d = configApp->desktop();
+ snprintf(title, sizeof(title), _("coreboot v%s Configuration"),
+ getenv("KERNELVERSION"));
+ setCaption(title);
+
+ width = configSettings->readNumEntry("/window width", d->width() - 64);
+ height = configSettings->readNumEntry("/window height", d->height() - 64);
+ resize(width, height);
+ x = configSettings->readNumEntry("/window x", 0, &ok);
+ if (ok)
+ y = configSettings->readNumEntry("/window y", 0, &ok);
+ if (ok)
+ move(x, y);
+
+ split1 = new QSplitter(this);
+ split1->setOrientation(QSplitter::Horizontal);
+ setCentralWidget(split1);
+
+ menuView = new ConfigView(split1, "menu");
+ menuList = menuView->list;
+
+ split2 = new QSplitter(split1);
+ split2->setOrientation(QSplitter::Vertical);
+
+ // create config tree
+ configView = new ConfigView(split2, "config");
+ configList = configView->list;
+
+ helpText = new ConfigInfoView(split2, "help");
+ helpText->setTextFormat(Qt::RichText);
+
+ setTabOrder(configList, helpText);
+ configList->setFocus();
+
+ menu = menuBar();
+ toolBar = new QToolBar("Tools", this);
+
+ backAction = new QAction("Back", QPixmap(xpm_back), _("Back"), 0, this);
+ connect(backAction, SIGNAL(activated()), SLOT(goBack()));
+ backAction->setEnabled(FALSE);
+ QAction *quitAction = new QAction("Quit", _("&Quit"), CTRL+Key_Q, this);
+ connect(quitAction, SIGNAL(activated()), SLOT(close()));
+ QAction *loadAction = new QAction("Load", QPixmap(xpm_load), _("&Load"), CTRL+Key_L, this);
+ connect(loadAction, SIGNAL(activated()), SLOT(loadConfig()));
+ saveAction = new QAction("Save", QPixmap(xpm_save), _("&Save"), CTRL+Key_S, this);
+ connect(saveAction, SIGNAL(activated()), SLOT(saveConfig()));
+ conf_set_changed_callback(conf_changed);
+ // Set saveAction's initial state
+ conf_changed();
+ QAction *saveAsAction = new QAction("Save As...", _("Save &As..."), 0, this);
+ connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs()));
+ QAction *searchAction = new QAction("Find", _("&Find"), CTRL+Key_F, this);
+ connect(searchAction, SIGNAL(activated()), SLOT(searchConfig()));
+ QAction *singleViewAction = new QAction("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this);
+ connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView()));
+ QAction *splitViewAction = new QAction("Split View", QPixmap(xpm_split_view), _("Split View"), 0, this);
+ connect(splitViewAction, SIGNAL(activated()), SLOT(showSplitView()));
+ QAction *fullViewAction = new QAction("Full View", QPixmap(xpm_tree_view), _("Full View"), 0, this);
+ connect(fullViewAction, SIGNAL(activated()), SLOT(showFullView()));
+
+ QAction *showNameAction = new QAction(NULL, _("Show Name"), 0, this);
+ showNameAction->setToggleAction(TRUE);
+ connect(showNameAction, SIGNAL(toggled(bool)), configView, SLOT(setShowName(bool)));
+ connect(configView, SIGNAL(showNameChanged(bool)), showNameAction, SLOT(setOn(bool)));
+ showNameAction->setOn(configView->showName());
+ QAction *showRangeAction = new QAction(NULL, _("Show Range"), 0, this);
+ showRangeAction->setToggleAction(TRUE);
+ connect(showRangeAction, SIGNAL(toggled(bool)), configView, SLOT(setShowRange(bool)));
+ connect(configView, SIGNAL(showRangeChanged(bool)), showRangeAction, SLOT(setOn(bool)));
+ showRangeAction->setOn(configList->showRange);
+ QAction *showDataAction = new QAction(NULL, _("Show Data"), 0, this);
+ showDataAction->setToggleAction(TRUE);
+ connect(showDataAction, SIGNAL(toggled(bool)), configView, SLOT(setShowData(bool)));
+ connect(configView, SIGNAL(showDataChanged(bool)), showDataAction, SLOT(setOn(bool)));
+ showDataAction->setOn(configList->showData);
+ QAction *showAllAction = new QAction(NULL, _("Show All Options"), 0, this);
+ showAllAction->setToggleAction(TRUE);
+ connect(showAllAction, SIGNAL(toggled(bool)), configView, SLOT(setShowAll(bool)));
+ connect(showAllAction, SIGNAL(toggled(bool)), menuView, SLOT(setShowAll(bool)));
+ showAllAction->setOn(configList->showAll);
+ QAction *showDebugAction = new QAction(NULL, _("Show Debug Info"), 0, this);
+ showDebugAction->setToggleAction(TRUE);
+ connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool)));
+ connect(helpText, SIGNAL(showDebugChanged(bool)), showDebugAction, SLOT(setOn(bool)));
+ showDebugAction->setOn(helpText->showDebug());
+
+ QAction *showIntroAction = new QAction(NULL, _("Introduction"), 0, this);
+ connect(showIntroAction, SIGNAL(activated()), SLOT(showIntro()));
+ QAction *showAboutAction = new QAction(NULL, _("About"), 0, this);
+ connect(showAboutAction, SIGNAL(activated()), SLOT(showAbout()));
+
+ // init tool bar
+ backAction->addTo(toolBar);
+ toolBar->addSeparator();
+ loadAction->addTo(toolBar);
+ saveAction->addTo(toolBar);
+ toolBar->addSeparator();
+ singleViewAction->addTo(toolBar);
+ splitViewAction->addTo(toolBar);
+ fullViewAction->addTo(toolBar);
+
+ // create config menu
+ QPopupMenu* config = new QPopupMenu(this);
+ menu->insertItem(_("&File"), config);
+ loadAction->addTo(config);
+ saveAction->addTo(config);
+ saveAsAction->addTo(config);
+ config->insertSeparator();
+ quitAction->addTo(config);
+
+ // create edit menu
+ QPopupMenu* editMenu = new QPopupMenu(this);
+ menu->insertItem(_("&Edit"), editMenu);
+ searchAction->addTo(editMenu);
+
+ // create options menu
+ QPopupMenu* optionMenu = new QPopupMenu(this);
+ menu->insertItem(_("&Option"), optionMenu);
+ showNameAction->addTo(optionMenu);
+ showRangeAction->addTo(optionMenu);
+ showDataAction->addTo(optionMenu);
+ optionMenu->insertSeparator();
+ showAllAction->addTo(optionMenu);
+ showDebugAction->addTo(optionMenu);
+
+ // create help menu
+ QPopupMenu* helpMenu = new QPopupMenu(this);
+ menu->insertSeparator();
+ menu->insertItem(_("&Help"), helpMenu);
+ showIntroAction->addTo(helpMenu);
+ showAboutAction->addTo(helpMenu);
+
+ connect(configList, SIGNAL(menuChanged(struct menu *)),
+ helpText, SLOT(setInfo(struct menu *)));
+ connect(configList, SIGNAL(menuSelected(struct menu *)),
+ SLOT(changeMenu(struct menu *)));
+ connect(configList, SIGNAL(parentSelected()),
+ SLOT(goBack()));
+ connect(menuList, SIGNAL(menuChanged(struct menu *)),
+ helpText, SLOT(setInfo(struct menu *)));
+ connect(menuList, SIGNAL(menuSelected(struct menu *)),
+ SLOT(changeMenu(struct menu *)));
+
+ connect(configList, SIGNAL(gotFocus(struct menu *)),
+ helpText, SLOT(setInfo(struct menu *)));
+ connect(menuList, SIGNAL(gotFocus(struct menu *)),
+ helpText, SLOT(setInfo(struct menu *)));
+ connect(menuList, SIGNAL(gotFocus(struct menu *)),
+ SLOT(listFocusChanged(void)));
+ connect(helpText, SIGNAL(menuSelected(struct menu *)),
+ SLOT(setMenuLink(struct menu *)));
+
+ QString listMode = configSettings->readEntry("/listMode", "symbol");
+ if (listMode == "single")
+ showSingleView();
+ else if (listMode == "full")
+ showFullView();
+ else /*if (listMode == "split")*/
+ showSplitView();
+
+ // UI setup done, restore splitter positions
+ QValueList<int> sizes = configSettings->readSizes("/split1", &ok);
+ if (ok)
+ split1->setSizes(sizes);
+
+ sizes = configSettings->readSizes("/split2", &ok);
+ if (ok)
+ split2->setSizes(sizes);
+}
+
+void ConfigMainWindow::loadConfig(void)
+{
+ QString s = QFileDialog::getOpenFileName(".config", NULL, this);
+ if (s.isNull())
+ return;
+ if (conf_read(QFile::encodeName(s)))
+ QMessageBox::information(this, "qconf", _("Unable to load configuration!"));
+ ConfigView::updateListAll();
+}
+
+void ConfigMainWindow::saveConfig(void)
+{
+ if (conf_write(NULL))
+ QMessageBox::information(this, "qconf", _("Unable to save configuration!"));
+ if (conf_write_autoconf())
+ QMessageBox::information(this, "qconf", _("Unable to save configuration!"));
+}
+
+void ConfigMainWindow::saveConfigAs(void)
+{
+ QString s = QFileDialog::getSaveFileName(".config", NULL, this);
+ if (s.isNull())
+ return;
+ if (conf_write(QFile::encodeName(s)))
+ QMessageBox::information(this, "qconf", _("Unable to save configuration!"));
+ if (conf_write_autoconf())
+ QMessageBox::information(this, "qconf", _("Unable to save configuration!"));
+}
+
+void ConfigMainWindow::searchConfig(void)
+{
+ if (!searchWindow)
+ searchWindow = new ConfigSearchWindow(this, "search");
+ searchWindow->show();
+}
+
+void ConfigMainWindow::changeMenu(struct menu *menu)
+{
+ configList->setRootMenu(menu);
+ if (configList->rootEntry->parent == &rootmenu)
+ backAction->setEnabled(FALSE);
+ else
+ backAction->setEnabled(TRUE);
+}
+
+void ConfigMainWindow::setMenuLink(struct menu *menu)
+{
+ struct menu *parent;
+ ConfigList* list = NULL;
+ ConfigItem* item;
+
+ if (!menu_is_visible(menu) && !configView->showAll())
+ return;
+
+ switch (configList->mode) {
+ case singleMode:
+ list = configList;
+ parent = menu_get_parent_menu(menu);
+ if (!parent)
+ return;
+ list->setRootMenu(parent);
+ break;
+ case symbolMode:
+ if (menu->flags & MENU_ROOT) {
+ configList->setRootMenu(menu);
+ configList->clearSelection();
+ list = menuList;
+ } else {
+ list = configList;
+ parent = menu_get_parent_menu(menu->parent);
+ if (!parent)
+ return;
+ item = menuList->findConfigItem(parent);
+ if (item) {
+ menuList->setSelected(item, TRUE);
+ menuList->ensureItemVisible(item);
+ }
+ list->setRootMenu(parent);
+ }
+ break;
+ case fullMode:
+ list = configList;
+ break;
+ }
+
+ if (list) {
+ item = list->findConfigItem(menu);
+ if (item) {
+ list->setSelected(item, TRUE);
+ list->ensureItemVisible(item);
+ list->setFocus();
+ }
+ }
+}
+
+void ConfigMainWindow::listFocusChanged(void)
+{
+ if (menuList->mode == menuMode)
+ configList->clearSelection();
+}
+
+void ConfigMainWindow::goBack(void)
+{
+ ConfigItem* item;
+
+ configList->setParentMenu();
+ if (configList->rootEntry == &rootmenu)
+ backAction->setEnabled(FALSE);
+ item = (ConfigItem*)menuList->selectedItem();
+ while (item) {
+ if (item->menu == configList->rootEntry) {
+ menuList->setSelected(item, TRUE);
+ break;
+ }
+ item = (ConfigItem*)item->parent();
+ }
+}
+
+void ConfigMainWindow::showSingleView(void)
+{
+ menuView->hide();
+ menuList->setRootMenu(0);
+ configList->mode = singleMode;
+ if (configList->rootEntry == &rootmenu)
+ configList->updateListAll();
+ else
+ configList->setRootMenu(&rootmenu);
+ configList->setAllOpen(TRUE);
+ configList->setFocus();
+}
+
+void ConfigMainWindow::showSplitView(void)
+{
+ configList->mode = symbolMode;
+ if (configList->rootEntry == &rootmenu)
+ configList->updateListAll();
+ else
+ configList->setRootMenu(&rootmenu);
+ configList->setAllOpen(TRUE);
+ configApp->processEvents();
+ menuList->mode = menuMode;
+ menuList->setRootMenu(&rootmenu);
+ menuList->setAllOpen(TRUE);
+ menuView->show();
+ menuList->setFocus();
+}
+
+void ConfigMainWindow::showFullView(void)
+{
+ menuView->hide();
+ menuList->setRootMenu(0);
+ configList->mode = fullMode;
+ if (configList->rootEntry == &rootmenu)
+ configList->updateListAll();
+ else
+ configList->setRootMenu(&rootmenu);
+ configList->setAllOpen(FALSE);
+ configList->setFocus();
+}
+
+/*
+ * ask for saving configuration before quitting
+ * TODO ask only when something changed
+ */
+void ConfigMainWindow::closeEvent(QCloseEvent* e)
+{
+ if (!conf_get_changed()) {
+ e->accept();
+ return;
+ }
+ QMessageBox mb("qconf", _("Save configuration?"), QMessageBox::Warning,
+ QMessageBox::Yes | QMessageBox::Default, QMessageBox::No, QMessageBox::Cancel | QMessageBox::Escape);
+ mb.setButtonText(QMessageBox::Yes, _("&Save Changes"));
+ mb.setButtonText(QMessageBox::No, _("&Discard Changes"));
+ mb.setButtonText(QMessageBox::Cancel, _("Cancel Exit"));
+ switch (mb.exec()) {
+ case QMessageBox::Yes:
+ conf_write(NULL);
+ conf_write_autoconf();
+ case QMessageBox::No:
+ e->accept();
+ break;
+ case QMessageBox::Cancel:
+ e->ignore();
+ break;
+ }
+}
+
+void ConfigMainWindow::showIntro(void)
+{
+ static const QString str = _("Welcome to the qconf graphical configuration tool for coreboot.\n\n"
+ "For each option, a blank box indicates the feature is disabled, a check\n"
+ "indicates it is enabled, and a dot indicates that it is to be compiled\n"
+ "as a module. Clicking on the box will cycle through the three states.\n\n"
+ "If you do not see an option (e.g., a device driver) that you believe\n"
+ "should be present, try turning on Show All Options under the Options menu.\n"
+ "Although there is no cross reference yet to help you figure out what other\n"
+ "options must be enabled to support the option you are interested in, you can\n"
+ "still view the help of a grayed-out option.\n\n"
+ "Toggling Show Debug Info under the Options menu will show the dependencies,\n"
+ "which you can then match by examining other options.\n\n");
+
+ QMessageBox::information(this, "qconf", str);
+}
+
+void ConfigMainWindow::showAbout(void)
+{
+ static const QString str = _("qconf is Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>.\n\n"
+ "Bug reports and feature request can also be entered at http://bugzilla.kernel.org/\n");
+
+ QMessageBox::information(this, "qconf", str);
+}
+
+void ConfigMainWindow::saveSettings(void)
+{
+ configSettings->writeEntry("/window x", pos().x());
+ configSettings->writeEntry("/window y", pos().y());
+ configSettings->writeEntry("/window width", size().width());
+ configSettings->writeEntry("/window height", size().height());
+
+ QString entry;
+ switch(configList->mode) {
+ case singleMode :
+ entry = "single";
+ break;
+
+ case symbolMode :
+ entry = "split";
+ break;
+
+ case fullMode :
+ entry = "full";
+ break;
+ }
+ configSettings->writeEntry("/listMode", entry);
+
+ configSettings->writeSizes("/split1", split1->sizes());
+ configSettings->writeSizes("/split2", split2->sizes());
+}
+
+void ConfigMainWindow::conf_changed(void)
+{
+ if (saveAction)
+ saveAction->setEnabled(conf_get_changed());
+}
+
+void fixup_rootmenu(struct menu *menu)
+{
+ struct menu *child;
+ static int menu_cnt = 0;
+
+ menu->flags |= MENU_ROOT;
+ for (child = menu->list; child; child = child->next) {
+ if (child->prompt && child->prompt->type == P_MENU) {
+ menu_cnt++;
+ fixup_rootmenu(child);
+ menu_cnt--;
+ } else if (!menu_cnt)
+ fixup_rootmenu(child);
+ }
+}
+
+static const char *progname;
+
+static void usage(void)
+{
+ printf(_("%s <config>\n"), progname);
+ exit(0);
+}
+
+int main(int ac, char** av)
+{
+ ConfigMainWindow* v;
+ const char *name;
+
+ bindtextdomain(PACKAGE, LOCALEDIR);
+ textdomain(PACKAGE);
+
+#ifndef LKC_DIRECT_LINK
+ kconfig_load();
+#endif
+
+ progname = av[0];
+ configApp = new QApplication(ac, av);
+ if (ac > 1 && av[1][0] == '-') {
+ switch (av[1][1]) {
+ case 'h':
+ case '?':
+ usage();
+ }
+ name = av[2];
+ } else
+ name = av[1];
+ if (!name)
+ usage();
+
+ conf_parse(name);
+ fixup_rootmenu(&rootmenu);
+ conf_read(NULL);
+ //zconfdump(stdout);
+
+ configSettings = new ConfigSettings();
+ configSettings->beginGroup("/kconfig/qconf");
+ v = new ConfigMainWindow();
+
+ //zconfdump(stdout);
+ configApp->setMainWidget(v);
+ configApp->connect(configApp, SIGNAL(lastWindowClosed()), SLOT(quit()));
+ configApp->connect(configApp, SIGNAL(aboutToQuit()), v, SLOT(saveSettings()));
+ v->show();
+ configApp->exec();
+
+ configSettings->endGroup();
+ delete configSettings;
+
+ return 0;
+}
diff --git a/util/kconfig/qconf.h b/util/kconfig/qconf.h
new file mode 100644
index 0000000..b3b5657
--- /dev/null
+++ b/util/kconfig/qconf.h
@@ -0,0 +1,334 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <qlistview.h>
+#if QT_VERSION >= 300
+#include <qsettings.h>
+#else
+class QSettings {
+public:
+ void beginGroup(const QString& group) { }
+ void endGroup(void) { }
+ bool readBoolEntry(const QString& key, bool def = FALSE, bool* ok = 0) const
+ { if (ok) *ok = FALSE; return def; }
+ int readNumEntry(const QString& key, int def = 0, bool* ok = 0) const
+ { if (ok) *ok = FALSE; return def; }
+ QString readEntry(const QString& key, const QString& def = QString::null, bool* ok = 0) const
+ { if (ok) *ok = FALSE; return def; }
+ QStringList readListEntry(const QString& key, bool* ok = 0) const
+ { if (ok) *ok = FALSE; return QStringList(); }
+ template <class t>
+ bool writeEntry(const QString& key, t value)
+ { return TRUE; }
+};
+#endif
+
+class ConfigView;
+class ConfigList;
+class ConfigItem;
+class ConfigLineEdit;
+class ConfigMainWindow;
+
+
+class ConfigSettings : public QSettings {
+public:
+ QValueList<int> readSizes(const QString& key, bool *ok);
+ bool writeSizes(const QString& key, const QValueList<int>& value);
+};
+
+enum colIdx {
+ promptColIdx, nameColIdx, noColIdx, modColIdx, yesColIdx, dataColIdx, colNr
+};
+enum listMode {
+ singleMode, menuMode, symbolMode, fullMode, listMode
+};
+
+class ConfigList : public QListView {
+ Q_OBJECT
+ typedef class QListView Parent;
+public:
+ ConfigList(ConfigView* p, const char *name = 0);
+ void reinit(void);
+ ConfigView* parent(void) const
+ {
+ return (ConfigView*)Parent::parent();
+ }
+ ConfigItem* findConfigItem(struct menu *);
+
+protected:
+ void keyPressEvent(QKeyEvent *e);
+ void contentsMousePressEvent(QMouseEvent *e);
+ void contentsMouseReleaseEvent(QMouseEvent *e);
+ void contentsMouseMoveEvent(QMouseEvent *e);
+ void contentsMouseDoubleClickEvent(QMouseEvent *e);
+ void focusInEvent(QFocusEvent *e);
+ void contextMenuEvent(QContextMenuEvent *e);
+
+public slots:
+ void setRootMenu(struct menu *menu);
+
+ void updateList(ConfigItem *item);
+ void setValue(ConfigItem* item, tristate val);
+ void changeValue(ConfigItem* item);
+ void updateSelection(void);
+ void saveSettings(void);
+signals:
+ void menuChanged(struct menu *menu);
+ void menuSelected(struct menu *menu);
+ void parentSelected(void);
+ void gotFocus(struct menu *);
+
+public:
+ void updateListAll(void)
+ {
+ updateAll = true;
+ updateList(NULL);
+ updateAll = false;
+ }
+ ConfigList* listView()
+ {
+ return this;
+ }
+ ConfigItem* firstChild() const
+ {
+ return (ConfigItem *)Parent::firstChild();
+ }
+ int mapIdx(colIdx idx)
+ {
+ return colMap[idx];
+ }
+ void addColumn(colIdx idx, const QString& label)
+ {
+ colMap[idx] = Parent::addColumn(label);
+ colRevMap[colMap[idx]] = idx;
+ }
+ void removeColumn(colIdx idx)
+ {
+ int col = colMap[idx];
+ if (col >= 0) {
+ Parent::removeColumn(col);
+ colRevMap[col] = colMap[idx] = -1;
+ }
+ }
+ void setAllOpen(bool open);
+ void setParentMenu(void);
+
+ template <class P>
+ void updateMenuList(P*, struct menu*);
+
+ bool updateAll;
+
+ QPixmap symbolYesPix, symbolModPix, symbolNoPix;
+ QPixmap choiceYesPix, choiceNoPix;
+ QPixmap menuPix, menuInvPix, menuBackPix, voidPix;
+
+ bool showAll, showName, showRange, showData;
+ enum listMode mode;
+ struct menu *rootEntry;
+ QColorGroup disabledColorGroup;
+ QColorGroup inactivedColorGroup;
+ QPopupMenu* headerPopup;
+
+private:
+ int colMap[colNr];
+ int colRevMap[colNr];
+};
+
+class ConfigItem : public QListViewItem {
+ typedef class QListViewItem Parent;
+public:
+ ConfigItem(QListView *parent, ConfigItem *after, struct menu *m, bool v)
+ : Parent(parent, after), menu(m), visible(v), goParent(false)
+ {
+ init();
+ }
+ ConfigItem(ConfigItem *parent, ConfigItem *after, struct menu *m, bool v)
+ : Parent(parent, after), menu(m), visible(v), goParent(false)
+ {
+ init();
+ }
+ ConfigItem(QListView *parent, ConfigItem *after, bool v)
+ : Parent(parent, after), menu(0), visible(v), goParent(true)
+ {
+ init();
+ }
+ ~ConfigItem(void);
+ void init(void);
+#if QT_VERSION >= 300
+ void okRename(int col);
+#endif
+ void updateMenu(void);
+ void testUpdateMenu(bool v);
+ ConfigList* listView() const
+ {
+ return (ConfigList*)Parent::listView();
+ }
+ ConfigItem* firstChild() const
+ {
+ return (ConfigItem *)Parent::firstChild();
+ }
+ ConfigItem* nextSibling() const
+ {
+ return (ConfigItem *)Parent::nextSibling();
+ }
+ void setText(colIdx idx, const QString& text)
+ {
+ Parent::setText(listView()->mapIdx(idx), text);
+ }
+ QString text(colIdx idx) const
+ {
+ return Parent::text(listView()->mapIdx(idx));
+ }
+ void setPixmap(colIdx idx, const QPixmap& pm)
+ {
+ Parent::setPixmap(listView()->mapIdx(idx), pm);
+ }
+ const QPixmap* pixmap(colIdx idx) const
+ {
+ return Parent::pixmap(listView()->mapIdx(idx));
+ }
+ void paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align);
+
+ ConfigItem* nextItem;
+ struct menu *menu;
+ bool visible;
+ bool goParent;
+};
+
+class ConfigLineEdit : public QLineEdit {
+ Q_OBJECT
+ typedef class QLineEdit Parent;
+public:
+ ConfigLineEdit(ConfigView* parent);
+ ConfigView* parent(void) const
+ {
+ return (ConfigView*)Parent::parent();
+ }
+ void show(ConfigItem *i);
+ void keyPressEvent(QKeyEvent *e);
+
+public:
+ ConfigItem *item;
+};
+
+class ConfigView : public QVBox {
+ Q_OBJECT
+ typedef class QVBox Parent;
+public:
+ ConfigView(QWidget* parent, const char *name = 0);
+ ~ConfigView(void);
+ static void updateList(ConfigItem* item);
+ static void updateListAll(void);
+
+ bool showAll(void) const { return list->showAll; }
+ bool showName(void) const { return list->showName; }
+ bool showRange(void) const { return list->showRange; }
+ bool showData(void) const { return list->showData; }
+public slots:
+ void setShowAll(bool);
+ void setShowName(bool);
+ void setShowRange(bool);
+ void setShowData(bool);
+signals:
+ void showAllChanged(bool);
+ void showNameChanged(bool);
+ void showRangeChanged(bool);
+ void showDataChanged(bool);
+public:
+ ConfigList* list;
+ ConfigLineEdit* lineEdit;
+
+ static ConfigView* viewList;
+ ConfigView* nextView;
+};
+
+class ConfigInfoView : public QTextBrowser {
+ Q_OBJECT
+ typedef class QTextBrowser Parent;
+public:
+ ConfigInfoView(QWidget* parent, const char *name = 0);
+ bool showDebug(void) const { return _showDebug; }
+
+public slots:
+ void setInfo(struct menu *menu);
+ void saveSettings(void);
+ void setSource(const QString& name);
+ void setShowDebug(bool);
+
+signals:
+ void showDebugChanged(bool);
+ void menuSelected(struct menu *);
+
+protected:
+ void symbolInfo(void);
+ void menuInfo(void);
+ QString debug_info(struct symbol *sym);
+ static QString print_filter(const QString &str);
+ static void expr_print_help(void *data, struct symbol *sym, const char *str);
+ QPopupMenu* createPopupMenu(const QPoint& pos);
+ void contentsContextMenuEvent(QContextMenuEvent *e);
+
+ struct symbol *sym;
+ struct menu *menu;
+ bool _showDebug;
+};
+
+class ConfigSearchWindow : public QDialog {
+ Q_OBJECT
+ typedef class QDialog Parent;
+public:
+ ConfigSearchWindow(ConfigMainWindow* parent, const char *name = 0);
+
+public slots:
+ void saveSettings(void);
+ void search(void);
+
+protected:
+ QLineEdit* editField;
+ QPushButton* searchButton;
+ QSplitter* split;
+ ConfigView* list;
+ ConfigInfoView* info;
+
+ struct symbol **result;
+};
+
+class ConfigMainWindow : public QMainWindow {
+ Q_OBJECT
+
+ static QAction *saveAction;
+ static void conf_changed(void);
+public:
+ ConfigMainWindow(void);
+public slots:
+ void changeMenu(struct menu *);
+ void setMenuLink(struct menu *);
+ void listFocusChanged(void);
+ void goBack(void);
+ void loadConfig(void);
+ void saveConfig(void);
+ void saveConfigAs(void);
+ void searchConfig(void);
+ void showSingleView(void);
+ void showSplitView(void);
+ void showFullView(void);
+ void showIntro(void);
+ void showAbout(void);
+ void saveSettings(void);
+
+protected:
+ void closeEvent(QCloseEvent *e);
+
+ ConfigSearchWindow *searchWindow;
+ ConfigView *menuView;
+ ConfigList *menuList;
+ ConfigView *configView;
+ ConfigList *configList;
+ ConfigInfoView *helpText;
+ QToolBar *toolBar;
+ QAction *backAction;
+ QSplitter* split1;
+ QSplitter* split2;
+};
diff --git a/util/kconfig/symbol.c b/util/kconfig/symbol.c
new file mode 100644
index 0000000..4a03191
--- /dev/null
+++ b/util/kconfig/symbol.c
@@ -0,0 +1,917 @@
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <ctype.h>
+#include <stdlib.h>
+#include <string.h>
+#include <regex.h>
+#include <sys/utsname.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+struct symbol symbol_yes = {
+ .name = "y",
+ .curr = { "y", yes },
+ .flags = SYMBOL_CONST|SYMBOL_VALID,
+}, symbol_mod = {
+ .name = "m",
+ .curr = { "m", mod },
+ .flags = SYMBOL_CONST|SYMBOL_VALID,
+}, symbol_no = {
+ .name = "n",
+ .curr = { "n", no },
+ .flags = SYMBOL_CONST|SYMBOL_VALID,
+}, symbol_empty = {
+ .name = "",
+ .curr = { "", no },
+ .flags = SYMBOL_VALID,
+};
+
+struct symbol *sym_defconfig_list;
+struct symbol *modules_sym;
+tristate modules_val;
+
+struct expr *sym_env_list;
+
+void sym_add_default(struct symbol *sym, const char *def)
+{
+ struct property *prop = prop_alloc(P_DEFAULT, sym);
+
+ prop->expr = expr_alloc_symbol(sym_lookup(def, 1));
+}
+
+void sym_init(void)
+{
+ struct symbol *sym;
+ struct utsname uts;
+ static bool inited = false;
+
+ if (inited)
+ return;
+ inited = true;
+
+ uname(&uts);
+
+ sym = sym_lookup("UNAME_RELEASE", 0);
+ sym->type = S_STRING;
+ sym->flags |= SYMBOL_AUTO;
+ sym_add_default(sym, uts.release);
+}
+
+enum symbol_type sym_get_type(struct symbol *sym)
+{
+ enum symbol_type type = sym->type;
+
+ if (type == S_TRISTATE) {
+ if (sym_is_choice_value(sym) && sym->visible == yes)
+ type = S_BOOLEAN;
+ else if (modules_val == no)
+ type = S_BOOLEAN;
+ }
+ return type;
+}
+
+const char *sym_type_name(enum symbol_type type)
+{
+ switch (type) {
+ case S_BOOLEAN:
+ return "boolean";
+ case S_TRISTATE:
+ return "tristate";
+ case S_INT:
+ return "integer";
+ case S_HEX:
+ return "hex";
+ case S_STRING:
+ return "string";
+ case S_UNKNOWN:
+ return "unknown";
+ case S_OTHER:
+ break;
+ }
+ return "???";
+}
+
+struct property *sym_get_choice_prop(struct symbol *sym)
+{
+ struct property *prop;
+
+ for_all_choices(sym, prop)
+ return prop;
+ return NULL;
+}
+
+struct property *sym_get_env_prop(struct symbol *sym)
+{
+ struct property *prop;
+
+ for_all_properties(sym, prop, P_ENV)
+ return prop;
+ return NULL;
+}
+
+struct property *sym_get_default_prop(struct symbol *sym)
+{
+ struct property *prop;
+
+ for_all_defaults(sym, prop) {
+ prop->visible.tri = expr_calc_value(prop->visible.expr);
+ if (prop->visible.tri != no)
+ return prop;
+ }
+ return NULL;
+}
+
+struct property *sym_get_range_prop(struct symbol *sym)
+{
+ struct property *prop;
+
+ for_all_properties(sym, prop, P_RANGE) {
+ prop->visible.tri = expr_calc_value(prop->visible.expr);
+ if (prop->visible.tri != no)
+ return prop;
+ }
+ return NULL;
+}
+
+static int sym_get_range_val(struct symbol *sym, int base)
+{
+ sym_calc_value(sym);
+ switch (sym->type) {
+ case S_INT:
+ base = 10;
+ break;
+ case S_HEX:
+ base = 16;
+ break;
+ default:
+ break;
+ }
+ return strtol(sym->curr.val, NULL, base);
+}
+
+static void sym_validate_range(struct symbol *sym)
+{
+ struct property *prop;
+ int base, val, val2;
+ char str[64];
+
+ switch (sym->type) {
+ case S_INT:
+ base = 10;
+ break;
+ case S_HEX:
+ base = 16;
+ break;
+ default:
+ return;
+ }
+ prop = sym_get_range_prop(sym);
+ if (!prop)
+ return;
+ val = strtol(sym->curr.val, NULL, base);
+ val2 = sym_get_range_val(prop->expr->left.sym, base);
+ if (val >= val2) {
+ val2 = sym_get_range_val(prop->expr->right.sym, base);
+ if (val <= val2)
+ return;
+ }
+ if (sym->type == S_INT)
+ sprintf(str, "%d", val2);
+ else
+ sprintf(str, "0x%x", val2);
+ sym->curr.val = strdup(str);
+}
+
+static void sym_calc_visibility(struct symbol *sym)
+{
+ struct property *prop;
+ tristate tri;
+
+ /* any prompt visible? */
+ tri = no;
+ for_all_prompts(sym, prop) {
+ prop->visible.tri = expr_calc_value(prop->visible.expr);
+ tri = EXPR_OR(tri, prop->visible.tri);
+ }
+ if (tri == mod && (sym->type != S_TRISTATE || modules_val == no))
+ tri = yes;
+ if (sym->visible != tri) {
+ sym->visible = tri;
+ sym_set_changed(sym);
+ }
+ if (sym_is_choice_value(sym))
+ return;
+ tri = no;
+ if (sym->rev_dep.expr)
+ tri = expr_calc_value(sym->rev_dep.expr);
+ if (tri == mod && sym_get_type(sym) == S_BOOLEAN)
+ tri = yes;
+ if (sym->rev_dep.tri != tri) {
+ sym->rev_dep.tri = tri;
+ sym_set_changed(sym);
+ }
+}
+
+static struct symbol *sym_calc_choice(struct symbol *sym)
+{
+ struct symbol *def_sym;
+ struct property *prop;
+ struct expr *e;
+
+ /* is the user choice visible? */
+ def_sym = sym->def[S_DEF_USER].val;
+ if (def_sym) {
+ sym_calc_visibility(def_sym);
+ if (def_sym->visible != no)
+ return def_sym;
+ }
+
+ /* any of the defaults visible? */
+ for_all_defaults(sym, prop) {
+ prop->visible.tri = expr_calc_value(prop->visible.expr);
+ if (prop->visible.tri == no)
+ continue;
+ def_sym = prop_get_symbol(prop);
+ sym_calc_visibility(def_sym);
+ if (def_sym->visible != no)
+ return def_sym;
+ }
+
+ /* just get the first visible value */
+ prop = sym_get_choice_prop(sym);
+ expr_list_for_each_sym(prop->expr, e, def_sym) {
+ sym_calc_visibility(def_sym);
+ if (def_sym->visible != no)
+ return def_sym;
+ }
+
+ /* no choice? reset tristate value */
+ sym->curr.tri = no;
+ return NULL;
+}
+
+void sym_calc_value(struct symbol *sym)
+{
+ struct symbol_value newval, oldval;
+ struct property *prop;
+ struct expr *e;
+
+ if (!sym)
+ return;
+
+ if (sym->flags & SYMBOL_VALID)
+ return;
+ sym->flags |= SYMBOL_VALID;
+
+ oldval = sym->curr;
+
+ switch (sym->type) {
+ case S_INT:
+ case S_HEX:
+ case S_STRING:
+ newval = symbol_empty.curr;
+ break;
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ newval = symbol_no.curr;
+ break;
+ default:
+ sym->curr.val = sym->name;
+ sym->curr.tri = no;
+ return;
+ }
+ if (!sym_is_choice_value(sym))
+ sym->flags &= ~SYMBOL_WRITE;
+
+ sym_calc_visibility(sym);
+
+ /* set default if recursively called */
+ sym->curr = newval;
+
+ switch (sym_get_type(sym)) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ if (sym_is_choice_value(sym) && sym->visible == yes) {
+ prop = sym_get_choice_prop(sym);
+ newval.tri = (prop_get_symbol(prop)->curr.val == sym) ? yes : no;
+ } else {
+ if (sym->visible != no) {
+ /* if the symbol is visible use the user value
+ * if available, otherwise try the default value
+ */
+ sym->flags |= SYMBOL_WRITE;
+ if (sym_has_value(sym)) {
+ newval.tri = EXPR_AND(sym->def[S_DEF_USER].tri,
+ sym->visible);
+ goto calc_newval;
+ }
+ }
+ if (sym->rev_dep.tri != no)
+ sym->flags |= SYMBOL_WRITE;
+ if (!sym_is_choice(sym)) {
+ prop = sym_get_default_prop(sym);
+ if (prop) {
+ sym->flags |= SYMBOL_WRITE;
+ newval.tri = EXPR_AND(expr_calc_value(prop->expr),
+ prop->visible.tri);
+ }
+ }
+ calc_newval:
+ newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri);
+ }
+ if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN)
+ newval.tri = yes;
+ break;
+ case S_STRING:
+ case S_HEX:
+ case S_INT:
+ if (sym->visible != no) {
+ sym->flags |= SYMBOL_WRITE;
+ if (sym_has_value(sym)) {
+ newval.val = sym->def[S_DEF_USER].val;
+ break;
+ }
+ }
+ prop = sym_get_default_prop(sym);
+ if (prop) {
+ struct symbol *ds = prop_get_symbol(prop);
+ if (ds) {
+ sym->flags |= SYMBOL_WRITE;
+ sym_calc_value(ds);
+ newval.val = ds->curr.val;
+ }
+ }
+ break;
+ default:
+ ;
+ }
+
+ if (sym->flags & SYMBOL_AUTO)
+ sym->flags &= ~SYMBOL_WRITE;
+
+ sym->curr = newval;
+ if (sym_is_choice(sym) && newval.tri == yes)
+ sym->curr.val = sym_calc_choice(sym);
+ sym_validate_range(sym);
+
+ if (memcmp(&oldval, &sym->curr, sizeof(oldval))) {
+ sym_set_changed(sym);
+ if (modules_sym == sym) {
+ sym_set_all_changed();
+ modules_val = modules_sym->curr.tri;
+ }
+ }
+
+ if (sym_is_choice(sym)) {
+ struct symbol *choice_sym;
+ int flags = sym->flags & (SYMBOL_CHANGED | SYMBOL_WRITE);
+
+ prop = sym_get_choice_prop(sym);
+ expr_list_for_each_sym(prop->expr, e, choice_sym) {
+ choice_sym->flags |= flags;
+ if (flags & SYMBOL_CHANGED)
+ sym_set_changed(choice_sym);
+ }
+ }
+}
+
+void sym_clear_all_valid(void)
+{
+ struct symbol *sym;
+ int i;
+
+ for_all_symbols(i, sym)
+ sym->flags &= ~SYMBOL_VALID;
+ sym_add_change_count(1);
+ if (modules_sym)
+ sym_calc_value(modules_sym);
+}
+
+void sym_set_changed(struct symbol *sym)
+{
+ struct property *prop;
+
+ sym->flags |= SYMBOL_CHANGED;
+ for (prop = sym->prop; prop; prop = prop->next) {
+ if (prop->menu)
+ prop->menu->flags |= MENU_CHANGED;
+ }
+}
+
+void sym_set_all_changed(void)
+{
+ struct symbol *sym;
+ int i;
+
+ for_all_symbols(i, sym)
+ sym_set_changed(sym);
+}
+
+bool sym_tristate_within_range(struct symbol *sym, tristate val)
+{
+ int type = sym_get_type(sym);
+
+ if (sym->visible == no)
+ return false;
+
+ if (type != S_BOOLEAN && type != S_TRISTATE)
+ return false;
+
+ if (type == S_BOOLEAN && val == mod)
+ return false;
+ if (sym->visible <= sym->rev_dep.tri)
+ return false;
+ if (sym_is_choice_value(sym) && sym->visible == yes)
+ return val == yes;
+ return val >= sym->rev_dep.tri && val <= sym->visible;
+}
+
+bool sym_set_tristate_value(struct symbol *sym, tristate val)
+{
+ tristate oldval = sym_get_tristate_value(sym);
+
+ if (oldval != val && !sym_tristate_within_range(sym, val))
+ return false;
+
+ if (!(sym->flags & SYMBOL_DEF_USER)) {
+ sym->flags |= SYMBOL_DEF_USER;
+ sym_set_changed(sym);
+ }
+ /*
+ * setting a choice value also resets the new flag of the choice
+ * symbol and all other choice values.
+ */
+ if (sym_is_choice_value(sym) && val == yes) {
+ struct symbol *cs = prop_get_symbol(sym_get_choice_prop(sym));
+ struct property *prop;
+ struct expr *e;
+
+ cs->def[S_DEF_USER].val = sym;
+ cs->flags |= SYMBOL_DEF_USER;
+ prop = sym_get_choice_prop(cs);
+ for (e = prop->expr; e; e = e->left.expr) {
+ if (e->right.sym->visible != no)
+ e->right.sym->flags |= SYMBOL_DEF_USER;
+ }
+ }
+
+ sym->def[S_DEF_USER].tri = val;
+ if (oldval != val)
+ sym_clear_all_valid();
+
+ return true;
+}
+
+tristate sym_toggle_tristate_value(struct symbol *sym)
+{
+ tristate oldval, newval;
+
+ oldval = newval = sym_get_tristate_value(sym);
+ do {
+ switch (newval) {
+ case no:
+ newval = mod;
+ break;
+ case mod:
+ newval = yes;
+ break;
+ case yes:
+ newval = no;
+ break;
+ }
+ if (sym_set_tristate_value(sym, newval))
+ break;
+ } while (oldval != newval);
+ return newval;
+}
+
+bool sym_string_valid(struct symbol *sym, const char *str)
+{
+ signed char ch;
+
+ switch (sym->type) {
+ case S_STRING:
+ return true;
+ case S_INT:
+ ch = *str++;
+ if (ch == '-')
+ ch = *str++;
+ if (!isdigit(ch))
+ return false;
+ if (ch == '0' && *str != 0)
+ return false;
+ while ((ch = *str++)) {
+ if (!isdigit(ch))
+ return false;
+ }
+ return true;
+ case S_HEX:
+ if (str[0] == '0' && (str[1] == 'x' || str[1] == 'X'))
+ str += 2;
+ ch = *str++;
+ do {
+ if (!isxdigit(ch))
+ return false;
+ } while ((ch = *str++));
+ return true;
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ switch (str[0]) {
+ case 'y': case 'Y':
+ case 'm': case 'M':
+ case 'n': case 'N':
+ return true;
+ }
+ return false;
+ default:
+ return false;
+ }
+}
+
+bool sym_string_within_range(struct symbol *sym, const char *str)
+{
+ struct property *prop;
+ int val;
+
+ switch (sym->type) {
+ case S_STRING:
+ return sym_string_valid(sym, str);
+ case S_INT:
+ if (!sym_string_valid(sym, str))
+ return false;
+ prop = sym_get_range_prop(sym);
+ if (!prop)
+ return true;
+ val = strtol(str, NULL, 10);
+ return val >= sym_get_range_val(prop->expr->left.sym, 10) &&
+ val <= sym_get_range_val(prop->expr->right.sym, 10);
+ case S_HEX:
+ if (!sym_string_valid(sym, str))
+ return false;
+ prop = sym_get_range_prop(sym);
+ if (!prop)
+ return true;
+ val = strtol(str, NULL, 16);
+ return val >= sym_get_range_val(prop->expr->left.sym, 16) &&
+ val <= sym_get_range_val(prop->expr->right.sym, 16);
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ switch (str[0]) {
+ case 'y': case 'Y':
+ return sym_tristate_within_range(sym, yes);
+ case 'm': case 'M':
+ return sym_tristate_within_range(sym, mod);
+ case 'n': case 'N':
+ return sym_tristate_within_range(sym, no);
+ }
+ return false;
+ default:
+ return false;
+ }
+}
+
+bool sym_set_string_value(struct symbol *sym, const char *newval)
+{
+ const char *oldval;
+ char *val;
+ int size;
+
+ switch (sym->type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ switch (newval[0]) {
+ case 'y': case 'Y':
+ return sym_set_tristate_value(sym, yes);
+ case 'm': case 'M':
+ return sym_set_tristate_value(sym, mod);
+ case 'n': case 'N':
+ return sym_set_tristate_value(sym, no);
+ }
+ return false;
+ default:
+ ;
+ }
+
+ if (!sym_string_within_range(sym, newval))
+ return false;
+
+ if (!(sym->flags & SYMBOL_DEF_USER)) {
+ sym->flags |= SYMBOL_DEF_USER;
+ sym_set_changed(sym);
+ }
+
+ oldval = sym->def[S_DEF_USER].val;
+ size = strlen(newval) + 1;
+ if (sym->type == S_HEX && (newval[0] != '0' || (newval[1] != 'x' && newval[1] != 'X'))) {
+ size += 2;
+ sym->def[S_DEF_USER].val = val = malloc(size);
+ *val++ = '0';
+ *val++ = 'x';
+ } else if (!oldval || strcmp(oldval, newval))
+ sym->def[S_DEF_USER].val = val = malloc(size);
+ else
+ return true;
+
+ strcpy(val, newval);
+ free((void *)oldval);
+ sym_clear_all_valid();
+
+ return true;
+}
+
+const char *sym_get_string_value(struct symbol *sym)
+{
+ tristate val;
+
+ switch (sym->type) {
+ case S_BOOLEAN:
+ case S_TRISTATE:
+ val = sym_get_tristate_value(sym);
+ switch (val) {
+ case no:
+ return "n";
+ case mod:
+ return "m";
+ case yes:
+ return "y";
+ }
+ break;
+ default:
+ ;
+ }
+ return (const char *)sym->curr.val;
+}
+
+bool sym_is_changable(struct symbol *sym)
+{
+ return sym->visible > sym->rev_dep.tri;
+}
+
+struct symbol *sym_lookup(const char *name, int isconst)
+{
+ struct symbol *symbol;
+ const char *ptr;
+ char *new_name;
+ int hash = 0;
+
+ if (name) {
+ if (name[0] && !name[1]) {
+ switch (name[0]) {
+ case 'y': return &symbol_yes;
+ case 'm': return &symbol_mod;
+ case 'n': return &symbol_no;
+ }
+ }
+ for (ptr = name; *ptr; ptr++)
+ hash += *ptr;
+ hash &= 0xff;
+
+ for (symbol = symbol_hash[hash]; symbol; symbol = symbol->next) {
+ if (!strcmp(symbol->name, name)) {
+ if ((isconst && symbol->flags & SYMBOL_CONST) ||
+ (!isconst && !(symbol->flags & SYMBOL_CONST)))
+ return symbol;
+ }
+ }
+ new_name = strdup(name);
+ } else {
+ new_name = NULL;
+ hash = 256;
+ }
+
+ symbol = malloc(sizeof(*symbol));
+ memset(symbol, 0, sizeof(*symbol));
+ symbol->name = new_name;
+ symbol->type = S_UNKNOWN;
+ if (isconst)
+ symbol->flags |= SYMBOL_CONST;
+
+ symbol->next = symbol_hash[hash];
+ symbol_hash[hash] = symbol;
+
+ return symbol;
+}
+
+struct symbol *sym_find(const char *name)
+{
+ struct symbol *symbol = NULL;
+ const char *ptr;
+ int hash = 0;
+
+ if (!name)
+ return NULL;
+
+ if (name[0] && !name[1]) {
+ switch (name[0]) {
+ case 'y': return &symbol_yes;
+ case 'm': return &symbol_mod;
+ case 'n': return &symbol_no;
+ }
+ }
+ for (ptr = name; *ptr; ptr++)
+ hash += *ptr;
+ hash &= 0xff;
+
+ for (symbol = symbol_hash[hash]; symbol; symbol = symbol->next) {
+ if (!strcmp(symbol->name, name) &&
+ !(symbol->flags & SYMBOL_CONST))
+ break;
+ }
+
+ return symbol;
+}
+
+struct symbol **sym_re_search(const char *pattern)
+{
+ struct symbol *sym, **sym_arr = NULL;
+ int i, cnt, size;
+ regex_t re;
+
+ cnt = size = 0;
+ /* Skip if empty */
+ if (strlen(pattern) == 0)
+ return NULL;
+ if (regcomp(&re, pattern, REG_EXTENDED|REG_NOSUB|REG_ICASE))
+ return NULL;
+
+ for_all_symbols(i, sym) {
+ if (sym->flags & SYMBOL_CONST || !sym->name)
+ continue;
+ if (regexec(&re, sym->name, 0, NULL, 0))
+ continue;
+ if (cnt + 1 >= size) {
+ void *tmp = sym_arr;
+ size += 16;
+ sym_arr = realloc(sym_arr, size * sizeof(struct symbol *));
+ if (!sym_arr) {
+ free(tmp);
+ return NULL;
+ }
+ }
+ sym_arr[cnt++] = sym;
+ }
+ if (sym_arr)
+ sym_arr[cnt] = NULL;
+ regfree(&re);
+
+ return sym_arr;
+}
+
+
+struct symbol *sym_check_deps(struct symbol *sym);
+
+static struct symbol *sym_check_expr_deps(struct expr *e)
+{
+ struct symbol *sym;
+
+ if (!e)
+ return NULL;
+ switch (e->type) {
+ case E_OR:
+ case E_AND:
+ sym = sym_check_expr_deps(e->left.expr);
+ if (sym)
+ return sym;
+ return sym_check_expr_deps(e->right.expr);
+ case E_NOT:
+ return sym_check_expr_deps(e->left.expr);
+ case E_EQUAL:
+ case E_UNEQUAL:
+ sym = sym_check_deps(e->left.sym);
+ if (sym)
+ return sym;
+ return sym_check_deps(e->right.sym);
+ case E_SYMBOL:
+ return sym_check_deps(e->left.sym);
+ default:
+ break;
+ }
+ printf("Oops! How to check %d?\n", e->type);
+ return NULL;
+}
+
+/* return NULL when dependencies are OK */
+struct symbol *sym_check_deps(struct symbol *sym)
+{
+ struct symbol *sym2;
+ struct property *prop;
+
+ if (sym->flags & SYMBOL_CHECK) {
+ fprintf(stderr, "%s:%d:error: found recursive dependency: %s",
+ sym->prop->file->name, sym->prop->lineno, sym->name);
+ return sym;
+ }
+ if (sym->flags & SYMBOL_CHECKED)
+ return NULL;
+
+ sym->flags |= (SYMBOL_CHECK | SYMBOL_CHECKED);
+ sym2 = sym_check_expr_deps(sym->rev_dep.expr);
+ if (sym2)
+ goto out;
+
+ for (prop = sym->prop; prop; prop = prop->next) {
+ if (prop->type == P_CHOICE || prop->type == P_SELECT)
+ continue;
+ sym2 = sym_check_expr_deps(prop->visible.expr);
+ if (sym2)
+ goto out;
+ if (prop->type != P_DEFAULT || sym_is_choice(sym))
+ continue;
+ sym2 = sym_check_expr_deps(prop->expr);
+ if (sym2)
+ goto out;
+ }
+out:
+ if (sym2)
+ fprintf(stderr, " -> %s%s", sym->name, sym2 == sym? "\n": "");
+ sym->flags &= ~SYMBOL_CHECK;
+ return sym2;
+}
+
+struct property *prop_alloc(enum prop_type type, struct symbol *sym)
+{
+ struct property *prop;
+ struct property **propp;
+
+ prop = malloc(sizeof(*prop));
+ memset(prop, 0, sizeof(*prop));
+ prop->type = type;
+ prop->sym = sym;
+ prop->file = current_file;
+ prop->lineno = zconf_lineno();
+
+ /* append property to the prop list of symbol */
+ if (sym) {
+ for (propp = &sym->prop; *propp; propp = &(*propp)->next)
+ ;
+ *propp = prop;
+ }
+
+ return prop;
+}
+
+struct symbol *prop_get_symbol(struct property *prop)
+{
+ if (prop->expr && (prop->expr->type == E_SYMBOL ||
+ prop->expr->type == E_LIST))
+ return prop->expr->left.sym;
+ return NULL;
+}
+
+const char *prop_get_type_name(enum prop_type type)
+{
+ switch (type) {
+ case P_PROMPT:
+ return "prompt";
+ case P_ENV:
+ return "env";
+ case P_COMMENT:
+ return "comment";
+ case P_MENU:
+ return "menu";
+ case P_DEFAULT:
+ return "default";
+ case P_CHOICE:
+ return "choice";
+ case P_SELECT:
+ return "select";
+ case P_RANGE:
+ return "range";
+ case P_UNKNOWN:
+ break;
+ }
+ return "unknown";
+}
+
+void prop_add_env(const char *env)
+{
+ struct symbol *sym, *sym2;
+ struct property *prop;
+ char *p;
+
+ sym = current_entry->sym;
+ sym->flags |= SYMBOL_AUTO;
+ for_all_properties(sym, prop, P_ENV) {
+ sym2 = prop_get_symbol(prop);
+ if (strcmp(sym2->name, env))
+ menu_warn(current_entry, "redefining environment symbol from %s",
+ sym2->name);
+ return;
+ }
+
+ prop = prop_alloc(P_ENV, sym);
+ prop->expr = expr_alloc_symbol(sym_lookup(env, 1));
+
+ sym_env_list = expr_alloc_one(E_LIST, sym_env_list);
+ sym_env_list->right.sym = sym;
+
+ p = getenv(env);
+ if (p)
+ sym_add_default(sym, p);
+ else
+ menu_warn(current_entry, "environment variable %s undefined", env);
+}
diff --git a/util/kconfig/util.c b/util/kconfig/util.c
new file mode 100644
index 0000000..a47d5e0
--- /dev/null
+++ b/util/kconfig/util.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2002-2005 Roman Zippel <zippel@linux-m68k.org>
+ * Copyright (C) 2002-2005 Sam Ravnborg <sam@ravnborg.org>
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <string.h>
+#include "lkc.h"
+
+/* file already present in list? If not add it */
+struct file *file_lookup(const char *name)
+{
+ struct file *file;
+
+ for (file = file_list; file; file = file->next) {
+ if (!strcmp(name, file->name))
+ return file;
+ }
+
+ file = malloc(sizeof(*file));
+ memset(file, 0, sizeof(*file));
+ file->name = strdup(name);
+ file->next = file_list;
+ file_list = file;
+ return file;
+}
+
+/* write a dependency file as used by kbuild to track dependencies */
+int file_write_dep(const char *name)
+{
+ struct symbol *sym, *env_sym;
+ struct expr *e;
+ struct file *file;
+ FILE *out;
+
+ if (!name)
+ name = ".kconfig.d";
+ out = fopen("..config.tmp", "w");
+ if (!out)
+ return 1;
+ fprintf(out, "deps_config := \\\n");
+ for (file = file_list; file; file = file->next) {
+ if (file->next)
+ fprintf(out, "\t%s \\\n", file->name);
+ else
+ fprintf(out, "\t%s\n", file->name);
+ }
+ fprintf(out, "\nbuild/auto.conf: \\\n"
+ "\t$(deps_config)\n\n");
+
+ expr_list_for_each_sym(sym_env_list, e, sym) {
+ struct property *prop;
+ const char *value;
+
+ prop = sym_get_env_prop(sym);
+ env_sym = prop_get_symbol(prop);
+ if (!env_sym)
+ continue;
+ value = getenv(env_sym->name);
+ if (!value)
+ value = "";
+ fprintf(out, "ifneq \"$(%s)\" \"%s\"\n", env_sym->name, value);
+ fprintf(out, "build/auto.conf: FORCE\n");
+ fprintf(out, "endif\n");
+ }
+
+ fprintf(out, "\n$(deps_config): ;\n");
+ fclose(out);
+ rename("..config.tmp", name);
+ return 0;
+}
+
+
+/* Allocate initial growable sting */
+struct gstr str_new(void)
+{
+ struct gstr gs;
+ gs.s = malloc(sizeof(char) * 64);
+ gs.len = 16;
+ strcpy(gs.s, "\0");
+ return gs;
+}
+
+/* Allocate and assign growable string */
+struct gstr str_assign(const char *s)
+{
+ struct gstr gs;
+ gs.s = strdup(s);
+ gs.len = strlen(s) + 1;
+ return gs;
+}
+
+/* Free storage for growable string */
+void str_free(struct gstr *gs)
+{
+ if (gs->s)
+ free(gs->s);
+ gs->s = NULL;
+ gs->len = 0;
+}
+
+/* Append to growable string */
+void str_append(struct gstr *gs, const char *s)
+{
+ size_t l;
+ if (s) {
+ l = strlen(gs->s) + strlen(s) + 1;
+ if (l > gs->len) {
+ gs->s = realloc(gs->s, l);
+ gs->len = l;
+ }
+ strcat(gs->s, s);
+ }
+}
+
+/* Append printf formatted string to growable string */
+void str_printf(struct gstr *gs, const char *fmt, ...)
+{
+ va_list ap;
+ char s[10000]; /* big enough... */
+ va_start(ap, fmt);
+ vsnprintf(s, sizeof(s), fmt, ap);
+ str_append(gs, s);
+ va_end(ap);
+}
+
+/* Retrieve value of growable string */
+const char *str_get(struct gstr *gs)
+{
+ return gs->s;
+}
+
diff --git a/util/kconfig/zconf.gperf b/util/kconfig/zconf.gperf
new file mode 100644
index 0000000..25ef5d0
--- /dev/null
+++ b/util/kconfig/zconf.gperf
@@ -0,0 +1,44 @@
+%language=ANSI-C
+%define hash-function-name kconf_id_hash
+%define lookup-function-name kconf_id_lookup
+%define string-pool-name kconf_id_strings
+%compare-strncmp
+%enum
+%pic
+%struct-type
+
+struct kconf_id;
+
+%%
+mainmenu, T_MAINMENU, TF_COMMAND
+menu, T_MENU, TF_COMMAND
+endmenu, T_ENDMENU, TF_COMMAND
+source, T_SOURCE, TF_COMMAND
+choice, T_CHOICE, TF_COMMAND
+endchoice, T_ENDCHOICE, TF_COMMAND
+comment, T_COMMENT, TF_COMMAND
+config, T_CONFIG, TF_COMMAND
+menuconfig, T_MENUCONFIG, TF_COMMAND
+help, T_HELP, TF_COMMAND
+if, T_IF, TF_COMMAND|TF_PARAM
+endif, T_ENDIF, TF_COMMAND
+depends, T_DEPENDS, TF_COMMAND
+optional, T_OPTIONAL, TF_COMMAND
+default, T_DEFAULT, TF_COMMAND, S_UNKNOWN
+prompt, T_PROMPT, TF_COMMAND
+tristate, T_TYPE, TF_COMMAND, S_TRISTATE
+def_tristate, T_DEFAULT, TF_COMMAND, S_TRISTATE
+bool, T_TYPE, TF_COMMAND, S_BOOLEAN
+boolean, T_TYPE, TF_COMMAND, S_BOOLEAN
+def_bool, T_DEFAULT, TF_COMMAND, S_BOOLEAN
+int, T_TYPE, TF_COMMAND, S_INT
+hex, T_TYPE, TF_COMMAND, S_HEX
+string, T_TYPE, TF_COMMAND, S_STRING
+select, T_SELECT, TF_COMMAND
+range, T_RANGE, TF_COMMAND
+option, T_OPTION, TF_COMMAND
+on, T_ON, TF_PARAM
+modules, T_OPT_MODULES, TF_OPTION
+defconfig_list, T_OPT_DEFCONFIG_LIST,TF_OPTION
+env, T_OPT_ENV, TF_OPTION
+%%
diff --git a/util/kconfig/zconf.hash.c_shipped b/util/kconfig/zconf.hash.c_shipped
new file mode 100644
index 0000000..5c73d51
--- /dev/null
+++ b/util/kconfig/zconf.hash.c_shipped
@@ -0,0 +1,237 @@
+/* ANSI-C code produced by gperf version 3.0.3 */
+/* Command-line: gperf */
+/* Computed positions: -k'1,3' */
+
+#if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
+ && ('%' == 37) && ('&' == 38) && ('\'' == 39) && ('(' == 40) \
+ && (')' == 41) && ('*' == 42) && ('+' == 43) && (',' == 44) \
+ && ('-' == 45) && ('.' == 46) && ('/' == 47) && ('0' == 48) \
+ && ('1' == 49) && ('2' == 50) && ('3' == 51) && ('4' == 52) \
+ && ('5' == 53) && ('6' == 54) && ('7' == 55) && ('8' == 56) \
+ && ('9' == 57) && (':' == 58) && (';' == 59) && ('<' == 60) \
+ && ('=' == 61) && ('>' == 62) && ('?' == 63) && ('A' == 65) \
+ && ('B' == 66) && ('C' == 67) && ('D' == 68) && ('E' == 69) \
+ && ('F' == 70) && ('G' == 71) && ('H' == 72) && ('I' == 73) \
+ && ('J' == 74) && ('K' == 75) && ('L' == 76) && ('M' == 77) \
+ && ('N' == 78) && ('O' == 79) && ('P' == 80) && ('Q' == 81) \
+ && ('R' == 82) && ('S' == 83) && ('T' == 84) && ('U' == 85) \
+ && ('V' == 86) && ('W' == 87) && ('X' == 88) && ('Y' == 89) \
+ && ('Z' == 90) && ('[' == 91) && ('\\' == 92) && (']' == 93) \
+ && ('^' == 94) && ('_' == 95) && ('a' == 97) && ('b' == 98) \
+ && ('c' == 99) && ('d' == 100) && ('e' == 101) && ('f' == 102) \
+ && ('g' == 103) && ('h' == 104) && ('i' == 105) && ('j' == 106) \
+ && ('k' == 107) && ('l' == 108) && ('m' == 109) && ('n' == 110) \
+ && ('o' == 111) && ('p' == 112) && ('q' == 113) && ('r' == 114) \
+ && ('s' == 115) && ('t' == 116) && ('u' == 117) && ('v' == 118) \
+ && ('w' == 119) && ('x' == 120) && ('y' == 121) && ('z' == 122) \
+ && ('{' == 123) && ('|' == 124) && ('}' == 125) && ('~' == 126))
+/* The character set is not based on ISO-646. */
+#error "gperf generated tables don't work with this execution character set. Please report a bug to <bug-gnu-gperf@gnu.org>."
+#endif
+
+struct kconf_id;
+/* maximum key range = 47, duplicates = 0 */
+
+#ifdef __GNUC__
+__inline
+#else
+#ifdef __cplusplus
+inline
+#endif
+#endif
+static unsigned int
+kconf_id_hash (register const char *str, register unsigned int len)
+{
+ static unsigned char asso_values[] =
+ {
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 11, 5,
+ 0, 0, 5, 49, 5, 20, 49, 49, 5, 20,
+ 5, 0, 30, 49, 0, 15, 0, 10, 0, 49,
+ 25, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
+ 49, 49, 49, 49, 49, 49
+ };
+ register int hval = len;
+
+ switch (hval)
+ {
+ default:
+ hval += asso_values[(unsigned char)str[2]];
+ /*FALLTHROUGH*/
+ case 2:
+ case 1:
+ hval += asso_values[(unsigned char)str[0]];
+ break;
+ }
+ return hval;
+}
+
+struct kconf_id_strings_t
+ {
+ char kconf_id_strings_str2[sizeof("on")];
+ char kconf_id_strings_str3[sizeof("env")];
+ char kconf_id_strings_str5[sizeof("endif")];
+ char kconf_id_strings_str6[sizeof("option")];
+ char kconf_id_strings_str7[sizeof("endmenu")];
+ char kconf_id_strings_str8[sizeof("optional")];
+ char kconf_id_strings_str9[sizeof("endchoice")];
+ char kconf_id_strings_str10[sizeof("range")];
+ char kconf_id_strings_str11[sizeof("choice")];
+ char kconf_id_strings_str12[sizeof("default")];
+ char kconf_id_strings_str13[sizeof("def_bool")];
+ char kconf_id_strings_str14[sizeof("help")];
+ char kconf_id_strings_str15[sizeof("bool")];
+ char kconf_id_strings_str16[sizeof("config")];
+ char kconf_id_strings_str17[sizeof("def_tristate")];
+ char kconf_id_strings_str18[sizeof("boolean")];
+ char kconf_id_strings_str19[sizeof("defconfig_list")];
+ char kconf_id_strings_str21[sizeof("string")];
+ char kconf_id_strings_str22[sizeof("if")];
+ char kconf_id_strings_str23[sizeof("int")];
+ char kconf_id_strings_str26[sizeof("select")];
+ char kconf_id_strings_str27[sizeof("modules")];
+ char kconf_id_strings_str28[sizeof("tristate")];
+ char kconf_id_strings_str29[sizeof("menu")];
+ char kconf_id_strings_str31[sizeof("source")];
+ char kconf_id_strings_str32[sizeof("comment")];
+ char kconf_id_strings_str33[sizeof("hex")];
+ char kconf_id_strings_str35[sizeof("menuconfig")];
+ char kconf_id_strings_str36[sizeof("prompt")];
+ char kconf_id_strings_str37[sizeof("depends")];
+ char kconf_id_strings_str48[sizeof("mainmenu")];
+ };
+static struct kconf_id_strings_t kconf_id_strings_contents =
+ {
+ "on",
+ "env",
+ "endif",
+ "option",
+ "endmenu",
+ "optional",
+ "endchoice",
+ "range",
+ "choice",
+ "default",
+ "def_bool",
+ "help",
+ "bool",
+ "config",
+ "def_tristate",
+ "boolean",
+ "defconfig_list",
+ "string",
+ "if",
+ "int",
+ "select",
+ "modules",
+ "tristate",
+ "menu",
+ "source",
+ "comment",
+ "hex",
+ "menuconfig",
+ "prompt",
+ "depends",
+ "mainmenu"
+ };
+#define kconf_id_strings ((const char *) &kconf_id_strings_contents)
+#ifdef __GNUC__
+__inline
+#ifdef __GNUC_STDC_INLINE__
+__attribute__ ((__gnu_inline__))
+#endif
+#endif
+struct kconf_id *
+kconf_id_lookup (register const char *str, register unsigned int len)
+{
+ enum
+ {
+ TOTAL_KEYWORDS = 31,
+ MIN_WORD_LENGTH = 2,
+ MAX_WORD_LENGTH = 14,
+ MIN_HASH_VALUE = 2,
+ MAX_HASH_VALUE = 48
+ };
+
+ static struct kconf_id wordlist[] =
+ {
+ {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str2, T_ON, TF_PARAM},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str3, T_OPT_ENV, TF_OPTION},
+ {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str5, T_ENDIF, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str6, T_OPTION, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str7, T_ENDMENU, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str8, T_OPTIONAL, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str9, T_ENDCHOICE, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str10, T_RANGE, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str11, T_CHOICE, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str12, T_DEFAULT, TF_COMMAND, S_UNKNOWN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str13, T_DEFAULT, TF_COMMAND, S_BOOLEAN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str14, T_HELP, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str15, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str16, T_CONFIG, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str17, T_DEFAULT, TF_COMMAND, S_TRISTATE},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str19, T_OPT_DEFCONFIG_LIST,TF_OPTION},
+ {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21, T_TYPE, TF_COMMAND, S_STRING},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22, T_IF, TF_COMMAND|TF_PARAM},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23, T_TYPE, TF_COMMAND, S_INT},
+ {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str26, T_SELECT, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27, T_OPT_MODULES, TF_OPTION},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28, T_TYPE, TF_COMMAND, S_TRISTATE},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str29, T_MENU, TF_COMMAND},
+ {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str31, T_SOURCE, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str32, T_COMMENT, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str33, T_TYPE, TF_COMMAND, S_HEX},
+ {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str35, T_MENUCONFIG, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_PROMPT, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_DEPENDS, TF_COMMAND},
+ {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1},
+ {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND}
+ };
+
+ if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
+ {
+ register int key = kconf_id_hash (str, len);
+
+ if (key <= MAX_HASH_VALUE && key >= 0)
+ {
+ register int o = wordlist[key].name;
+ if (o >= 0)
+ {
+ register const char *s = o + kconf_id_strings;
+
+ if (*str == *s && !strncmp (str + 1, s + 1, len - 1) && s[len] == '\0')
+ return &wordlist[key];
+ }
+ }
+ }
+ return 0;
+}
+
diff --git a/util/kconfig/zconf.l b/util/kconfig/zconf.l
new file mode 100644
index 0000000..4cea5c8
--- /dev/null
+++ b/util/kconfig/zconf.l
@@ -0,0 +1,355 @@
+%option backup nostdinit noyywrap never-interactive full ecs
+%option 8bit backup nodefault perf-report perf-report
+%x COMMAND HELP STRING PARAM
+%{
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+#define START_STRSIZE 16
+
+static struct {
+ struct file *file;
+ int lineno;
+} current_pos;
+
+static char *text;
+static int text_size, text_asize;
+
+struct buffer {
+ struct buffer *parent;
+ YY_BUFFER_STATE state;
+};
+
+struct buffer *current_buf;
+
+static int last_ts, first_ts;
+
+static void zconf_endhelp(void);
+static void zconf_endfile(void);
+
+void new_string(void)
+{
+ text = malloc(START_STRSIZE);
+ text_asize = START_STRSIZE;
+ text_size = 0;
+ *text = 0;
+}
+
+void append_string(const char *str, int size)
+{
+ int new_size = text_size + size + 1;
+ if (new_size > text_asize) {
+ new_size += START_STRSIZE - 1;
+ new_size &= -START_STRSIZE;
+ text = realloc(text, new_size);
+ text_asize = new_size;
+ }
+ memcpy(text + text_size, str, size);
+ text_size += size;
+ text[text_size] = 0;
+}
+
+void alloc_string(const char *str, int size)
+{
+ text = malloc(size + 1);
+ memcpy(text, str, size);
+ text[size] = 0;
+}
+%}
+
+ws [ \n\t]
+n [A-Za-z0-9_]
+
+%%
+ int str = 0;
+ int ts, i;
+
+[ \t]*#.*\n |
+[ \t]*\n {
+ current_file->lineno++;
+ return T_EOL;
+}
+[ \t]*#.*
+
+
+[ \t]+ {
+ BEGIN(COMMAND);
+}
+
+. {
+ unput(yytext[0]);
+ BEGIN(COMMAND);
+}
+
+
+<COMMAND>{
+ {n}+ {
+ struct kconf_id *id = kconf_id_lookup(yytext, yyleng);
+ BEGIN(PARAM);
+ current_pos.file = current_file;
+ current_pos.lineno = current_file->lineno;
+ if (id && id->flags & TF_COMMAND) {
+ zconflval.id = id;
+ return id->token;
+ }
+ alloc_string(yytext, yyleng);
+ zconflval.string = text;
+ return T_WORD;
+ }
+ .
+ \n {
+ BEGIN(INITIAL);
+ current_file->lineno++;
+ return T_EOL;
+ }
+}
+
+<PARAM>{
+ "&&" return T_AND;
+ "||" return T_OR;
+ "(" return T_OPEN_PAREN;
+ ")" return T_CLOSE_PAREN;
+ "!" return T_NOT;
+ "=" return T_EQUAL;
+ "!=" return T_UNEQUAL;
+ \"|\' {
+ str = yytext[0];
+ new_string();
+ BEGIN(STRING);
+ }
+ \n BEGIN(INITIAL); current_file->lineno++; return T_EOL;
+ --- /* ignore */
+ ({n}|[-/.])+ {
+ struct kconf_id *id = kconf_id_lookup(yytext, yyleng);
+ if (id && id->flags & TF_PARAM) {
+ zconflval.id = id;
+ return id->token;
+ }
+ alloc_string(yytext, yyleng);
+ zconflval.string = text;
+ return T_WORD;
+ }
+ #.* /* comment */
+ \\\n current_file->lineno++;
+ .
+ <<EOF>> {
+ BEGIN(INITIAL);
+ }
+}
+
+<STRING>{
+ [^'"\\\n]+/\n {
+ append_string(yytext, yyleng);
+ zconflval.string = text;
+ return T_WORD_QUOTE;
+ }
+ [^'"\\\n]+ {
+ append_string(yytext, yyleng);
+ }
+ \\.?/\n {
+ append_string(yytext + 1, yyleng - 1);
+ zconflval.string = text;
+ return T_WORD_QUOTE;
+ }
+ \\.? {
+ append_string(yytext + 1, yyleng - 1);
+ }
+ \'|\" {
+ if (str == yytext[0]) {
+ BEGIN(PARAM);
+ zconflval.string = text;
+ return T_WORD_QUOTE;
+ } else
+ append_string(yytext, 1);
+ }
+ \n {
+ printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno());
+ current_file->lineno++;
+ BEGIN(INITIAL);
+ return T_EOL;
+ }
+ <<EOF>> {
+ BEGIN(INITIAL);
+ }
+}
+
+<HELP>{
+ [ \t]+ {
+ ts = 0;
+ for (i = 0; i < yyleng; i++) {
+ if (yytext[i] == '\t')
+ ts = (ts & ~7) + 8;
+ else
+ ts++;
+ }
+ last_ts = ts;
+ if (first_ts) {
+ if (ts < first_ts) {
+ zconf_endhelp();
+ return T_HELPTEXT;
+ }
+ ts -= first_ts;
+ while (ts > 8) {
+ append_string(" ", 8);
+ ts -= 8;
+ }
+ append_string(" ", ts);
+ }
+ }
+ [ \t]*\n/[^ \t\n] {
+ current_file->lineno++;
+ zconf_endhelp();
+ return T_HELPTEXT;
+ }
+ [ \t]*\n {
+ current_file->lineno++;
+ append_string("\n", 1);
+ }
+ [^ \t\n].* {
+ while (yyleng) {
+ if ((yytext[yyleng-1] != ' ') && (yytext[yyleng-1] != '\t'))
+ break;
+ yyleng--;
+ }
+ append_string(yytext, yyleng);
+ if (!first_ts)
+ first_ts = last_ts;
+ }
+ <<EOF>> {
+ zconf_endhelp();
+ return T_HELPTEXT;
+ }
+}
+
+<<EOF>> {
+ if (current_file) {
+ zconf_endfile();
+ return T_EOL;
+ }
+ fclose(yyin);
+ yyterminate();
+}
+
+%%
+void zconf_starthelp(void)
+{
+ new_string();
+ last_ts = first_ts = 0;
+ BEGIN(HELP);
+}
+
+static void zconf_endhelp(void)
+{
+ zconflval.string = text;
+ BEGIN(INITIAL);
+}
+
+
+/*
+ * Try to open specified file with following names:
+ * ./name
+ * $(srctree)/name
+ * The latter is used when srctree is separate from objtree
+ * when compiling the kernel.
+ * Return NULL if file is not found.
+ */
+FILE *zconf_fopen(const char *name)
+{
+ char *env, fullname[PATH_MAX+1];
+ FILE *f;
+
+ f = fopen(name, "r");
+ if (!f && name != NULL && name[0] != '/') {
+ env = getenv(SRCTREE);
+ if (env) {
+ sprintf(fullname, "%s/%s", env, name);
+ f = fopen(fullname, "r");
+ }
+ }
+ return f;
+}
+
+void zconf_initscan(const char *name)
+{
+ yyin = zconf_fopen(name);
+ if (!yyin) {
+ printf("can't find file %s\n", name);
+ exit(1);
+ }
+
+ current_buf = malloc(sizeof(*current_buf));
+ memset(current_buf, 0, sizeof(*current_buf));
+
+ current_file = file_lookup(name);
+ current_file->lineno = 1;
+ current_file->flags = FILE_BUSY;
+}
+
+void zconf_nextfile(const char *name)
+{
+ struct file *file = file_lookup(name);
+ struct buffer *buf = malloc(sizeof(*buf));
+ memset(buf, 0, sizeof(*buf));
+
+ current_buf->state = YY_CURRENT_BUFFER;
+ yyin = zconf_fopen(name);
+ if (!yyin) {
+ printf("%s:%d: can't open file \"%s\"\n", zconf_curname(), zconf_lineno(), name);
+ exit(1);
+ }
+ yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
+ buf->parent = current_buf;
+ current_buf = buf;
+
+ if (file->flags & FILE_BUSY) {
+ printf("recursive scan (%s)?\n", name);
+ exit(1);
+ }
+ if (file->flags & FILE_SCANNED) {
+ printf("file %s already scanned?\n", name);
+ exit(1);
+ }
+ file->flags |= FILE_BUSY;
+ file->lineno = 1;
+ file->parent = current_file;
+ current_file = file;
+}
+
+static void zconf_endfile(void)
+{
+ struct buffer *parent;
+
+ current_file->flags |= FILE_SCANNED;
+ current_file->flags &= ~FILE_BUSY;
+ current_file = current_file->parent;
+
+ parent = current_buf->parent;
+ if (parent) {
+ fclose(yyin);
+ yy_delete_buffer(YY_CURRENT_BUFFER);
+ yy_switch_to_buffer(parent->state);
+ }
+ free(current_buf);
+ current_buf = parent;
+}
+
+int zconf_lineno(void)
+{
+ return current_pos.lineno;
+}
+
+char *zconf_curname(void)
+{
+ return current_pos.file ? current_pos.file->name : "<none>";
+}
diff --git a/util/kconfig/zconf.tab.c_shipped b/util/kconfig/zconf.tab.c_shipped
new file mode 100644
index 0000000..b0c90c3
--- /dev/null
+++ b/util/kconfig/zconf.tab.c_shipped
@@ -0,0 +1,2478 @@
+/* A Bison parser, made by GNU Bison 2.3. */
+
+/* Skeleton implementation for Bison's Yacc-like parsers in C
+
+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
+
+/* As a special exception, you may create a larger work that contains
+ part or all of the Bison parser skeleton and distribute that work
+ under terms of your choice, so long as that work isn't itself a
+ parser generator using the skeleton or a modified version thereof
+ as a parser skeleton. Alternatively, if you modify or redistribute
+ the parser skeleton itself, you may (at your option) remove this
+ special exception, which will cause the skeleton and the resulting
+ Bison output files to be licensed under the GNU General Public
+ License without this special exception.
+
+ This special exception was added by the Free Software Foundation in
+ version 2.2 of Bison. */
+
+/* C LALR(1) parser skeleton written by Richard Stallman, by
+ simplifying the original so-called "semantic" parser. */
+
+/* All symbols defined below should begin with yy or YY, to avoid
+ infringing on user name space. This should be done even for local
+ variables, as they might otherwise be expanded by user macros.
+ There are some unavoidable exceptions within include files to
+ define necessary library symbols; they are noted "INFRINGES ON
+ USER NAME SPACE" below. */
+
+/* Identify Bison output. */
+#define YYBISON 1
+
+/* Bison version. */
+#define YYBISON_VERSION "2.3"
+
+/* Skeleton name. */
+#define YYSKELETON_NAME "yacc.c"
+
+/* Pure parsers. */
+#define YYPURE 0
+
+/* Using locations. */
+#define YYLSP_NEEDED 0
+
+/* Substitute the variable and function names. */
+#define yyparse zconfparse
+#define yylex zconflex
+#define yyerror zconferror
+#define yylval zconflval
+#define yychar zconfchar
+#define yydebug zconfdebug
+#define yynerrs zconfnerrs
+
+
+/* Tokens. */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+ /* Put the tokens into the symbol table, so that GDB and other debuggers
+ know about them. */
+ enum yytokentype {
+ T_MAINMENU = 258,
+ T_MENU = 259,
+ T_ENDMENU = 260,
+ T_SOURCE = 261,
+ T_CHOICE = 262,
+ T_ENDCHOICE = 263,
+ T_COMMENT = 264,
+ T_CONFIG = 265,
+ T_MENUCONFIG = 266,
+ T_HELP = 267,
+ T_HELPTEXT = 268,
+ T_IF = 269,
+ T_ENDIF = 270,
+ T_DEPENDS = 271,
+ T_OPTIONAL = 272,
+ T_PROMPT = 273,
+ T_TYPE = 274,
+ T_DEFAULT = 275,
+ T_SELECT = 276,
+ T_RANGE = 277,
+ T_OPTION = 278,
+ T_ON = 279,
+ T_WORD = 280,
+ T_WORD_QUOTE = 281,
+ T_UNEQUAL = 282,
+ T_CLOSE_PAREN = 283,
+ T_OPEN_PAREN = 284,
+ T_EOL = 285,
+ T_OR = 286,
+ T_AND = 287,
+ T_EQUAL = 288,
+ T_NOT = 289
+ };
+#endif
+/* Tokens. */
+#define T_MAINMENU 258
+#define T_MENU 259
+#define T_ENDMENU 260
+#define T_SOURCE 261
+#define T_CHOICE 262
+#define T_ENDCHOICE 263
+#define T_COMMENT 264
+#define T_CONFIG 265
+#define T_MENUCONFIG 266
+#define T_HELP 267
+#define T_HELPTEXT 268
+#define T_IF 269
+#define T_ENDIF 270
+#define T_DEPENDS 271
+#define T_OPTIONAL 272
+#define T_PROMPT 273
+#define T_TYPE 274
+#define T_DEFAULT 275
+#define T_SELECT 276
+#define T_RANGE 277
+#define T_OPTION 278
+#define T_ON 279
+#define T_WORD 280
+#define T_WORD_QUOTE 281
+#define T_UNEQUAL 282
+#define T_CLOSE_PAREN 283
+#define T_OPEN_PAREN 284
+#define T_EOL 285
+#define T_OR 286
+#define T_AND 287
+#define T_EQUAL 288
+#define T_NOT 289
+
+
+
+
+/* Copy the first part of user declarations. */
+
+
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <ctype.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+#include "zconf.hash.c"
+
+#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt)
+
+#define PRINTD 0x0001
+#define DEBUG_PARSE 0x0002
+
+int cdebug = PRINTD;
+
+extern int zconflex(void);
+static void zconfprint(const char *err, ...);
+static void zconf_error(const char *err, ...);
+static void zconferror(const char *err);
+static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken);
+
+struct symbol *symbol_hash[257];
+
+static struct menu *current_menu, *current_entry;
+
+#define YYDEBUG 0
+#if YYDEBUG
+#define YYERROR_VERBOSE
+#endif
+
+
+/* Enabling traces. */
+#ifndef YYDEBUG
+# define YYDEBUG 0
+#endif
+
+/* Enabling verbose error messages. */
+#ifdef YYERROR_VERBOSE
+# undef YYERROR_VERBOSE
+# define YYERROR_VERBOSE 1
+#else
+# define YYERROR_VERBOSE 0
+#endif
+
+/* Enabling the token table. */
+#ifndef YYTOKEN_TABLE
+# define YYTOKEN_TABLE 0
+#endif
+
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+typedef union YYSTYPE
+
+{
+ char *string;
+ struct file *file;
+ struct symbol *symbol;
+ struct expr *expr;
+ struct menu *menu;
+ struct kconf_id *id;
+}
+/* Line 187 of yacc.c. */
+
+ YYSTYPE;
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+
+
+
+/* Copy the second part of user declarations. */
+
+
+/* Line 216 of yacc.c. */
+
+
+#ifdef short
+# undef short
+#endif
+
+#ifdef YYTYPE_UINT8
+typedef YYTYPE_UINT8 yytype_uint8;
+#else
+typedef unsigned char yytype_uint8;
+#endif
+
+#ifdef YYTYPE_INT8
+typedef YYTYPE_INT8 yytype_int8;
+#elif (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+typedef signed char yytype_int8;
+#else
+typedef short int yytype_int8;
+#endif
+
+#ifdef YYTYPE_UINT16
+typedef YYTYPE_UINT16 yytype_uint16;
+#else
+typedef unsigned short int yytype_uint16;
+#endif
+
+#ifdef YYTYPE_INT16
+typedef YYTYPE_INT16 yytype_int16;
+#else
+typedef short int yytype_int16;
+#endif
+
+#ifndef YYSIZE_T
+# ifdef __SIZE_TYPE__
+# define YYSIZE_T __SIZE_TYPE__
+# elif defined size_t
+# define YYSIZE_T size_t
+# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
+# define YYSIZE_T size_t
+# else
+# define YYSIZE_T unsigned int
+# endif
+#endif
+
+#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
+
+#ifndef YY_
+# if YYENABLE_NLS
+# if ENABLE_NLS
+# include <libintl.h> /* INFRINGES ON USER NAME SPACE */
+# define YY_(msgid) dgettext ("bison-runtime", msgid)
+# endif
+# endif
+# ifndef YY_
+# define YY_(msgid) msgid
+# endif
+#endif
+
+/* Suppress unused-variable warnings by "using" E. */
+#if ! defined lint || defined __GNUC__
+# define YYUSE(e) ((void) (e))
+#else
+# define YYUSE(e) /* empty */
+#endif
+
+/* Identity function, used to suppress warnings about constant conditions. */
+#ifndef lint
+# define YYID(n) (n)
+#else
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static int
+YYID (int i)
+#else
+static int
+YYID (i)
+ int i;
+#endif
+{
+ return i;
+}
+#endif
+
+#if ! defined yyoverflow || YYERROR_VERBOSE
+
+/* The parser invokes alloca or malloc; define the necessary symbols. */
+
+# ifdef YYSTACK_USE_ALLOCA
+# if YYSTACK_USE_ALLOCA
+# ifdef __GNUC__
+# define YYSTACK_ALLOC __builtin_alloca
+# elif defined __BUILTIN_VA_ARG_INCR
+# include <alloca.h> /* INFRINGES ON USER NAME SPACE */
+# elif defined _AIX
+# define YYSTACK_ALLOC __alloca
+# elif defined _MSC_VER
+# include <malloc.h> /* INFRINGES ON USER NAME SPACE */
+# define alloca _alloca
+# else
+# define YYSTACK_ALLOC alloca
+# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+# ifndef _STDLIB_H
+# define _STDLIB_H 1
+# endif
+# endif
+# endif
+# endif
+# endif
+
+# ifdef YYSTACK_ALLOC
+ /* Pacify GCC's `empty if-body' warning. */
+# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
+# ifndef YYSTACK_ALLOC_MAXIMUM
+ /* The OS might guarantee only one guard page at the bottom of the stack,
+ and a page size can be as small as 4096 bytes. So we cannot safely
+ invoke alloca (N) if N exceeds 4096. Use a slightly smaller number
+ to allow for a few compiler-allocated temporary stack slots. */
+# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
+# endif
+# else
+# define YYSTACK_ALLOC YYMALLOC
+# define YYSTACK_FREE YYFREE
+# ifndef YYSTACK_ALLOC_MAXIMUM
+# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
+# endif
+# if (defined __cplusplus && ! defined _STDLIB_H \
+ && ! ((defined YYMALLOC || defined malloc) \
+ && (defined YYFREE || defined free)))
+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+# ifndef _STDLIB_H
+# define _STDLIB_H 1
+# endif
+# endif
+# ifndef YYMALLOC
+# define YYMALLOC malloc
+# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
+# endif
+# endif
+# ifndef YYFREE
+# define YYFREE free
+# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+void free (void *); /* INFRINGES ON USER NAME SPACE */
+# endif
+# endif
+# endif
+#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
+
+
+#if (! defined yyoverflow \
+ && (! defined __cplusplus \
+ || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
+
+/* A type that is properly aligned for any stack member. */
+union yyalloc
+{
+ yytype_int16 yyss;
+ YYSTYPE yyvs;
+ };
+
+/* The size of the maximum gap between one aligned stack and the next. */
+# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
+
+/* The size of an array large to enough to hold all stacks, each with
+ N elements. */
+# define YYSTACK_BYTES(N) \
+ ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \
+ + YYSTACK_GAP_MAXIMUM)
+
+/* Copy COUNT objects from FROM to TO. The source and destination do
+ not overlap. */
+# ifndef YYCOPY
+# if defined __GNUC__ && 1 < __GNUC__
+# define YYCOPY(To, From, Count) \
+ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
+# else
+# define YYCOPY(To, From, Count) \
+ do \
+ { \
+ YYSIZE_T yyi; \
+ for (yyi = 0; yyi < (Count); yyi++) \
+ (To)[yyi] = (From)[yyi]; \
+ } \
+ while (YYID (0))
+# endif
+# endif
+
+/* Relocate STACK from its old location to the new one. The
+ local variables YYSIZE and YYSTACKSIZE give the old and new number of
+ elements in the stack, and YYPTR gives the new location of the
+ stack. Advance YYPTR to a properly aligned location for the next
+ stack. */
+# define YYSTACK_RELOCATE(Stack) \
+ do \
+ { \
+ YYSIZE_T yynewbytes; \
+ YYCOPY (&yyptr->Stack, Stack, yysize); \
+ Stack = &yyptr->Stack; \
+ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
+ yyptr += yynewbytes / sizeof (*yyptr); \
+ } \
+ while (YYID (0))
+
+#endif
+
+/* YYFINAL -- State number of the termination state. */
+#define YYFINAL 3
+/* YYLAST -- Last index in YYTABLE. */
+#define YYLAST 258
+
+/* YYNTOKENS -- Number of terminals. */
+#define YYNTOKENS 35
+/* YYNNTS -- Number of nonterminals. */
+#define YYNNTS 45
+/* YYNRULES -- Number of rules. */
+#define YYNRULES 108
+/* YYNRULES -- Number of states. */
+#define YYNSTATES 178
+
+/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
+#define YYUNDEFTOK 2
+#define YYMAXUTOK 289
+
+#define YYTRANSLATE(YYX) \
+ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
+
+/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
+static const yytype_uint8 yytranslate[] =
+{
+ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
+ 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
+ 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
+ 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
+};
+
+#if YYDEBUG
+/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
+ YYRHS. */
+static const yytype_uint16 yyprhs[] =
+{
+ 0, 0, 3, 5, 6, 9, 12, 15, 20, 23,
+ 28, 33, 37, 39, 41, 43, 45, 47, 49, 51,
+ 53, 55, 57, 59, 61, 63, 67, 70, 74, 77,
+ 81, 84, 85, 88, 91, 94, 97, 100, 103, 107,
+ 112, 117, 122, 128, 132, 133, 137, 138, 141, 144,
+ 147, 149, 153, 154, 157, 160, 163, 166, 169, 174,
+ 178, 181, 186, 187, 190, 194, 196, 200, 201, 204,
+ 207, 210, 214, 217, 219, 223, 224, 227, 230, 233,
+ 237, 241, 244, 247, 250, 251, 254, 257, 260, 265,
+ 266, 269, 271, 273, 276, 279, 282, 284, 287, 288,
+ 291, 293, 297, 301, 305, 308, 312, 316, 318
+};
+
+/* YYRHS -- A `-1'-separated list of the rules' RHS. */
+static const yytype_int8 yyrhs[] =
+{
+ 36, 0, -1, 37, -1, -1, 37, 39, -1, 37,
+ 53, -1, 37, 64, -1, 37, 3, 74, 76, -1,
+ 37, 75, -1, 37, 25, 1, 30, -1, 37, 38,
+ 1, 30, -1, 37, 1, 30, -1, 16, -1, 18,
+ -1, 19, -1, 21, -1, 17, -1, 22, -1, 20,
+ -1, 30, -1, 59, -1, 68, -1, 42, -1, 44,
+ -1, 66, -1, 25, 1, 30, -1, 1, 30, -1,
+ 10, 25, 30, -1, 41, 45, -1, 11, 25, 30,
+ -1, 43, 45, -1, -1, 45, 46, -1, 45, 47,
+ -1, 45, 72, -1, 45, 70, -1, 45, 40, -1,
+ 45, 30, -1, 19, 73, 30, -1, 18, 74, 77,
+ 30, -1, 20, 78, 77, 30, -1, 21, 25, 77,
+ 30, -1, 22, 79, 79, 77, 30, -1, 23, 48,
+ 30, -1, -1, 48, 25, 49, -1, -1, 33, 74,
+ -1, 7, 30, -1, 50, 54, -1, 75, -1, 51,
+ 56, 52, -1, -1, 54, 55, -1, 54, 72, -1,
+ 54, 70, -1, 54, 30, -1, 54, 40, -1, 18,
+ 74, 77, 30, -1, 19, 73, 30, -1, 17, 30,
+ -1, 20, 25, 77, 30, -1, -1, 56, 39, -1,
+ 14, 78, 76, -1, 75, -1, 57, 60, 58, -1,
+ -1, 60, 39, -1, 60, 64, -1, 60, 53, -1,
+ 4, 74, 30, -1, 61, 71, -1, 75, -1, 62,
+ 65, 63, -1, -1, 65, 39, -1, 65, 64, -1,
+ 65, 53, -1, 6, 74, 30, -1, 9, 74, 30,
+ -1, 67, 71, -1, 12, 30, -1, 69, 13, -1,
+ -1, 71, 72, -1, 71, 30, -1, 71, 40, -1,
+ 16, 24, 78, 30, -1, -1, 74, 77, -1, 25,
+ -1, 26, -1, 5, 30, -1, 8, 30, -1, 15,
+ 30, -1, 30, -1, 76, 30, -1, -1, 14, 78,
+ -1, 79, -1, 79, 33, 79, -1, 79, 27, 79,
+ -1, 29, 78, 28, -1, 34, 78, -1, 78, 31,
+ 78, -1, 78, 32, 78, -1, 25, -1, 26, -1
+};
+
+/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
+static const yytype_uint16 yyrline[] =
+{
+ 0, 104, 104, 106, 108, 109, 110, 111, 112, 113,
+ 114, 118, 122, 122, 122, 122, 122, 122, 122, 126,
+ 127, 128, 129, 130, 131, 135, 136, 142, 150, 156,
+ 164, 174, 176, 177, 178, 179, 180, 181, 184, 192,
+ 198, 208, 214, 220, 223, 225, 236, 237, 242, 251,
+ 256, 264, 267, 269, 270, 271, 272, 273, 276, 282,
+ 293, 299, 309, 311, 316, 324, 332, 335, 337, 338,
+ 339, 344, 351, 356, 364, 367, 369, 370, 371, 374,
+ 382, 389, 396, 402, 409, 411, 412, 413, 416, 424,
+ 426, 431, 432, 435, 436, 437, 441, 442, 445, 446,
+ 449, 450, 451, 452, 453, 454, 455, 458, 459
+};
+#endif
+
+#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE
+/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
+ First, the terminals, then, starting at YYNTOKENS, nonterminals. */
+static const char *const yytname[] =
+{
+ "$end", "error", "$undefined", "T_MAINMENU", "T_MENU", "T_ENDMENU",
+ "T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG",
+ "T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS",
+ "T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE",
+ "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
+ "T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL",
+ "T_NOT", "$accept", "input", "stmt_list", "option_name", "common_stmt",
+ "option_error", "config_entry_start", "config_stmt",
+ "menuconfig_entry_start", "menuconfig_stmt", "config_option_list",
+ "config_option", "symbol_option", "symbol_option_list",
+ "symbol_option_arg", "choice", "choice_entry", "choice_end",
+ "choice_stmt", "choice_option_list", "choice_option", "choice_block",
+ "if_entry", "if_end", "if_stmt", "if_block", "menu", "menu_entry",
+ "menu_end", "menu_stmt", "menu_block", "source_stmt", "comment",
+ "comment_stmt", "help_start", "help", "depends_list", "depends",
+ "prompt_stmt_opt", "prompt", "end", "nl", "if_expr", "expr", "symbol", 0
+};
+#endif
+
+# ifdef YYPRINT
+/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
+ token YYLEX-NUM. */
+static const yytype_uint16 yytoknum[] =
+{
+ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
+ 265, 266, 267, 268, 269, 270, 271, 272, 273, 274,
+ 275, 276, 277, 278, 279, 280, 281, 282, 283, 284,
+ 285, 286, 287, 288, 289
+};
+# endif
+
+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
+static const yytype_uint8 yyr1[] =
+{
+ 0, 35, 36, 37, 37, 37, 37, 37, 37, 37,
+ 37, 37, 38, 38, 38, 38, 38, 38, 38, 39,
+ 39, 39, 39, 39, 39, 40, 40, 41, 42, 43,
+ 44, 45, 45, 45, 45, 45, 45, 45, 46, 46,
+ 46, 46, 46, 47, 48, 48, 49, 49, 50, 51,
+ 52, 53, 54, 54, 54, 54, 54, 54, 55, 55,
+ 55, 55, 56, 56, 57, 58, 59, 60, 60, 60,
+ 60, 61, 62, 63, 64, 65, 65, 65, 65, 66,
+ 67, 68, 69, 70, 71, 71, 71, 71, 72, 73,
+ 73, 74, 74, 75, 75, 75, 76, 76, 77, 77,
+ 78, 78, 78, 78, 78, 78, 78, 79, 79
+};
+
+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
+static const yytype_uint8 yyr2[] =
+{
+ 0, 2, 1, 0, 2, 2, 2, 4, 2, 4,
+ 4, 3, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 3, 2, 3, 2, 3,
+ 2, 0, 2, 2, 2, 2, 2, 2, 3, 4,
+ 4, 4, 5, 3, 0, 3, 0, 2, 2, 2,
+ 1, 3, 0, 2, 2, 2, 2, 2, 4, 3,
+ 2, 4, 0, 2, 3, 1, 3, 0, 2, 2,
+ 2, 3, 2, 1, 3, 0, 2, 2, 2, 3,
+ 3, 2, 2, 2, 0, 2, 2, 2, 4, 0,
+ 2, 1, 1, 2, 2, 2, 1, 2, 0, 2,
+ 1, 3, 3, 3, 2, 3, 3, 1, 1
+};
+
+/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
+ STATE-NUM when YYTABLE doesn't specify something else to do. Zero
+ means the default is an error. */
+static const yytype_uint8 yydefact[] =
+{
+ 3, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 12, 16, 13, 14,
+ 18, 15, 17, 0, 19, 0, 4, 31, 22, 31,
+ 23, 52, 62, 5, 67, 20, 84, 75, 6, 24,
+ 84, 21, 8, 11, 91, 92, 0, 0, 93, 0,
+ 48, 94, 0, 0, 0, 107, 108, 0, 0, 0,
+ 100, 95, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 96, 7, 71, 79, 80, 27, 29, 0,
+ 104, 0, 0, 64, 0, 0, 9, 10, 0, 0,
+ 0, 0, 89, 0, 0, 0, 44, 0, 37, 36,
+ 32, 33, 0, 35, 34, 0, 0, 89, 0, 56,
+ 57, 53, 55, 54, 63, 51, 50, 68, 70, 66,
+ 69, 65, 86, 87, 85, 76, 78, 74, 77, 73,
+ 97, 103, 105, 106, 102, 101, 26, 82, 0, 98,
+ 0, 98, 98, 98, 0, 0, 0, 83, 60, 98,
+ 0, 98, 0, 0, 0, 38, 90, 0, 0, 98,
+ 46, 43, 25, 0, 59, 0, 88, 99, 39, 40,
+ 41, 0, 0, 45, 58, 61, 42, 47
+};
+
+/* YYDEFGOTO[NTERM-NUM]. */
+static const yytype_int16 yydefgoto[] =
+{
+ -1, 1, 2, 25, 26, 99, 27, 28, 29, 30,
+ 64, 100, 101, 145, 173, 31, 32, 115, 33, 66,
+ 111, 67, 34, 119, 35, 68, 36, 37, 127, 38,
+ 70, 39, 40, 41, 102, 103, 69, 104, 140, 141,
+ 42, 73, 154, 59, 60
+};
+
+/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
+ STATE-NUM. */
+#define YYPACT_NINF -78
+static const yytype_int16 yypact[] =
+{
+ -78, 33, 130, -78, -28, 73, 73, 7, 73, 36,
+ 41, 73, 26, 52, -4, 58, -78, -78, -78, -78,
+ -78, -78, -78, 90, -78, 94, -78, -78, -78, -78,
+ -78, -78, -78, -78, -78, -78, -78, -78, -78, -78,
+ -78, -78, -78, -78, -78, -78, 74, 85, -78, 96,
+ -78, -78, 131, 134, 147, -78, -78, -4, -4, 193,
+ -10, -78, 162, 164, 38, 102, 64, 148, 5, 192,
+ 5, 165, -78, 174, -78, -78, -78, -78, -78, 65,
+ -78, -4, -4, 174, 103, 103, -78, -78, 175, 185,
+ 197, 73, 73, -4, 194, 103, -78, 231, -78, -78,
+ -78, -78, 220, -78, -78, 204, 73, 73, 210, -78,
+ -78, -78, -78, -78, -78, -78, -78, -78, -78, -78,
+ -78, -78, -78, -78, -78, -78, -78, -78, -78, -78,
+ -78, -78, 205, -78, -78, -78, -78, -78, -4, 222,
+ 208, 222, 195, 222, 103, 2, 209, -78, -78, 222,
+ 211, 222, 199, -4, 212, -78, -78, 213, 214, 222,
+ 207, -78, -78, 215, -78, 216, -78, 111, -78, -78,
+ -78, 217, 73, -78, -78, -78, -78, -78
+};
+
+/* YYPGOTO[NTERM-NUM]. */
+static const yytype_int16 yypgoto[] =
+{
+ -78, -78, -78, -78, 121, -35, -78, -78, -78, -78,
+ 219, -78, -78, -78, -78, -78, -78, -78, -44, -78,
+ -78, -78, -78, -78, -78, -78, -78, -78, -78, -6,
+ -78, -78, -78, -78, -78, 183, 218, 21, 143, -5,
+ 146, 196, 69, -53, -77
+};
+
+/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
+ positive, shift that token. If negative, reduce the rule which
+ number is the opposite. If zero, do what YYDEFACT says.
+ If YYTABLE_NINF, syntax error. */
+#define YYTABLE_NINF -82
+static const yytype_int16 yytable[] =
+{
+ 46, 47, 43, 49, 79, 80, 52, 134, 135, 6,
+ 7, 8, 9, 10, 11, 12, 13, 84, 144, 14,
+ 15, 55, 56, 85, 118, 57, 126, 160, 132, 133,
+ 58, 110, 161, 3, 123, 24, 123, 48, -28, 88,
+ 142, -28, -28, -28, -28, -28, -28, -28, -28, -28,
+ 89, 53, -28, -28, 90, -28, 91, 92, 93, 94,
+ 95, 96, 120, 97, 128, 88, 50, 159, 98, -49,
+ -49, 51, -49, -49, -49, -49, 89, 54, -49, -49,
+ 90, 105, 106, 107, 108, 152, 139, 113, 61, 97,
+ 124, 62, 124, 131, 109, 63, 81, 82, 44, 45,
+ 167, 149, -30, 88, 72, -30, -30, -30, -30, -30,
+ -30, -30, -30, -30, 89, 74, -30, -30, 90, -30,
+ 91, 92, 93, 94, 95, 96, 75, 97, 55, 56,
+ -2, 4, 98, 5, 6, 7, 8, 9, 10, 11,
+ 12, 13, 81, 82, 14, 15, 16, 17, 18, 19,
+ 20, 21, 22, 7, 8, 23, 10, 11, 12, 13,
+ 24, 76, 14, 15, 77, -81, 88, 177, -81, -81,
+ -81, -81, -81, -81, -81, -81, -81, 78, 24, -81,
+ -81, 90, -81, -81, -81, -81, -81, -81, 114, 117,
+ 97, 125, 86, 88, 87, 122, -72, -72, -72, -72,
+ -72, -72, -72, -72, 130, 136, -72, -72, 90, 153,
+ 156, 157, 158, 116, 121, 137, 129, 97, 163, 143,
+ 165, 138, 122, 72, 81, 82, 81, 82, 171, 166,
+ 81, 82, 146, 147, 148, 151, 153, 82, 155, 162,
+ 172, 164, 168, 169, 170, 174, 175, 176, 65, 112,
+ 150, 0, 0, 0, 0, 83, 0, 0, 71
+};
+
+static const yytype_int16 yycheck[] =
+{
+ 5, 6, 30, 8, 57, 58, 11, 84, 85, 4,
+ 5, 6, 7, 8, 9, 10, 11, 27, 95, 14,
+ 15, 25, 26, 33, 68, 29, 70, 25, 81, 82,
+ 34, 66, 30, 0, 69, 30, 71, 30, 0, 1,
+ 93, 3, 4, 5, 6, 7, 8, 9, 10, 11,
+ 12, 25, 14, 15, 16, 17, 18, 19, 20, 21,
+ 22, 23, 68, 25, 70, 1, 30, 144, 30, 5,
+ 6, 30, 8, 9, 10, 11, 12, 25, 14, 15,
+ 16, 17, 18, 19, 20, 138, 91, 66, 30, 25,
+ 69, 1, 71, 28, 30, 1, 31, 32, 25, 26,
+ 153, 106, 0, 1, 30, 3, 4, 5, 6, 7,
+ 8, 9, 10, 11, 12, 30, 14, 15, 16, 17,
+ 18, 19, 20, 21, 22, 23, 30, 25, 25, 26,
+ 0, 1, 30, 3, 4, 5, 6, 7, 8, 9,
+ 10, 11, 31, 32, 14, 15, 16, 17, 18, 19,
+ 20, 21, 22, 5, 6, 25, 8, 9, 10, 11,
+ 30, 30, 14, 15, 30, 0, 1, 172, 3, 4,
+ 5, 6, 7, 8, 9, 10, 11, 30, 30, 14,
+ 15, 16, 17, 18, 19, 20, 21, 22, 67, 68,
+ 25, 70, 30, 1, 30, 30, 4, 5, 6, 7,
+ 8, 9, 10, 11, 30, 30, 14, 15, 16, 14,
+ 141, 142, 143, 67, 68, 30, 70, 25, 149, 25,
+ 151, 24, 30, 30, 31, 32, 31, 32, 159, 30,
+ 31, 32, 1, 13, 30, 25, 14, 32, 30, 30,
+ 33, 30, 30, 30, 30, 30, 30, 30, 29, 66,
+ 107, -1, -1, -1, -1, 59, -1, -1, 40
+};
+
+/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
+ symbol of state STATE-NUM. */
+static const yytype_uint8 yystos[] =
+{
+ 0, 36, 37, 0, 1, 3, 4, 5, 6, 7,
+ 8, 9, 10, 11, 14, 15, 16, 17, 18, 19,
+ 20, 21, 22, 25, 30, 38, 39, 41, 42, 43,
+ 44, 50, 51, 53, 57, 59, 61, 62, 64, 66,
+ 67, 68, 75, 30, 25, 26, 74, 74, 30, 74,
+ 30, 30, 74, 25, 25, 25, 26, 29, 34, 78,
+ 79, 30, 1, 1, 45, 45, 54, 56, 60, 71,
+ 65, 71, 30, 76, 30, 30, 30, 30, 30, 78,
+ 78, 31, 32, 76, 27, 33, 30, 30, 1, 12,
+ 16, 18, 19, 20, 21, 22, 23, 25, 30, 40,
+ 46, 47, 69, 70, 72, 17, 18, 19, 20, 30,
+ 40, 55, 70, 72, 39, 52, 75, 39, 53, 58,
+ 64, 75, 30, 40, 72, 39, 53, 63, 64, 75,
+ 30, 28, 78, 78, 79, 79, 30, 30, 24, 74,
+ 73, 74, 78, 25, 79, 48, 1, 13, 30, 74,
+ 73, 25, 78, 14, 77, 30, 77, 77, 77, 79,
+ 25, 30, 30, 77, 30, 77, 30, 78, 30, 30,
+ 30, 77, 33, 49, 30, 30, 30, 74
+};
+
+#define yyerrok (yyerrstatus = 0)
+#define yyclearin (yychar = YYEMPTY)
+#define YYEMPTY (-2)
+#define YYEOF 0
+
+#define YYACCEPT goto yyacceptlab
+#define YYABORT goto yyabortlab
+#define YYERROR goto yyerrorlab
+
+
+/* Like YYERROR except do call yyerror. This remains here temporarily
+ to ease the transition to the new meaning of YYERROR, for GCC.
+ Once GCC version 2 has supplanted version 1, this can go. */
+
+#define YYFAIL goto yyerrlab
+
+#define YYRECOVERING() (!!yyerrstatus)
+
+#define YYBACKUP(Token, Value) \
+do \
+ if (yychar == YYEMPTY && yylen == 1) \
+ { \
+ yychar = (Token); \
+ yylval = (Value); \
+ yytoken = YYTRANSLATE (yychar); \
+ YYPOPSTACK (1); \
+ goto yybackup; \
+ } \
+ else \
+ { \
+ yyerror (YY_("syntax error: cannot back up")); \
+ YYERROR; \
+ } \
+while (YYID (0))
+
+
+#define YYTERROR 1
+#define YYERRCODE 256
+
+
+/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
+ If N is 0, then set CURRENT to the empty location which ends
+ the previous symbol: RHS[0] (always defined). */
+
+#define YYRHSLOC(Rhs, K) ((Rhs)[K])
+#ifndef YYLLOC_DEFAULT
+# define YYLLOC_DEFAULT(Current, Rhs, N) \
+ do \
+ if (YYID (N)) \
+ { \
+ (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
+ (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
+ (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
+ (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
+ } \
+ else \
+ { \
+ (Current).first_line = (Current).last_line = \
+ YYRHSLOC (Rhs, 0).last_line; \
+ (Current).first_column = (Current).last_column = \
+ YYRHSLOC (Rhs, 0).last_column; \
+ } \
+ while (YYID (0))
+#endif
+
+
+/* YY_LOCATION_PRINT -- Print the location on the stream.
+ This macro was not mandated originally: define only if we know
+ we won't break user code: when these are the locations we know. */
+
+#ifndef YY_LOCATION_PRINT
+# if YYLTYPE_IS_TRIVIAL
+# define YY_LOCATION_PRINT(File, Loc) \
+ fprintf (File, "%d.%d-%d.%d", \
+ (Loc).first_line, (Loc).first_column, \
+ (Loc).last_line, (Loc).last_column)
+# else
+# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
+# endif
+#endif
+
+
+/* YYLEX -- calling `yylex' with the right arguments. */
+
+#ifdef YYLEX_PARAM
+# define YYLEX yylex (YYLEX_PARAM)
+#else
+# define YYLEX yylex ()
+#endif
+
+/* Enable debugging if requested. */
+#if YYDEBUG
+
+# ifndef YYFPRINTF
+# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
+# define YYFPRINTF fprintf
+# endif
+
+# define YYDPRINTF(Args) \
+do { \
+ if (yydebug) \
+ YYFPRINTF Args; \
+} while (YYID (0))
+
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \
+do { \
+ if (yydebug) \
+ { \
+ YYFPRINTF (stderr, "%s ", Title); \
+ yy_symbol_print (stderr, \
+ Type, Value); \
+ YYFPRINTF (stderr, "\n"); \
+ } \
+} while (YYID (0))
+
+
+/*--------------------------------.
+| Print this symbol on YYOUTPUT. |
+`--------------------------------*/
+
+/*ARGSUSED*/
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
+#else
+static void
+yy_symbol_value_print (yyoutput, yytype, yyvaluep)
+ FILE *yyoutput;
+ int yytype;
+ YYSTYPE const * const yyvaluep;
+#endif
+{
+ if (!yyvaluep)
+ return;
+# ifdef YYPRINT
+ if (yytype < YYNTOKENS)
+ YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
+# else
+ YYUSE (yyoutput);
+# endif
+ switch (yytype)
+ {
+ default:
+ break;
+ }
+}
+
+
+/*--------------------------------.
+| Print this symbol on YYOUTPUT. |
+`--------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
+#else
+static void
+yy_symbol_print (yyoutput, yytype, yyvaluep)
+ FILE *yyoutput;
+ int yytype;
+ YYSTYPE const * const yyvaluep;
+#endif
+{
+ if (yytype < YYNTOKENS)
+ YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
+ else
+ YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
+
+ yy_symbol_value_print (yyoutput, yytype, yyvaluep);
+ YYFPRINTF (yyoutput, ")");
+}
+
+/*------------------------------------------------------------------.
+| yy_stack_print -- Print the state stack from its BOTTOM up to its |
+| TOP (included). |
+`------------------------------------------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
+#else
+static void
+yy_stack_print (bottom, top)
+ yytype_int16 *bottom;
+ yytype_int16 *top;
+#endif
+{
+ YYFPRINTF (stderr, "Stack now");
+ for (; bottom <= top; ++bottom)
+ YYFPRINTF (stderr, " %d", *bottom);
+ YYFPRINTF (stderr, "\n");
+}
+
+# define YY_STACK_PRINT(Bottom, Top) \
+do { \
+ if (yydebug) \
+ yy_stack_print ((Bottom), (Top)); \
+} while (YYID (0))
+
+
+/*------------------------------------------------.
+| Report that the YYRULE is going to be reduced. |
+`------------------------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_reduce_print (YYSTYPE *yyvsp, int yyrule)
+#else
+static void
+yy_reduce_print (yyvsp, yyrule)
+ YYSTYPE *yyvsp;
+ int yyrule;
+#endif
+{
+ int yynrhs = yyr2[yyrule];
+ int yyi;
+ unsigned long int yylno = yyrline[yyrule];
+ YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
+ yyrule - 1, yylno);
+ /* The symbols being reduced. */
+ for (yyi = 0; yyi < yynrhs; yyi++)
+ {
+ fprintf (stderr, " $%d = ", yyi + 1);
+ yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
+ &(yyvsp[(yyi + 1) - (yynrhs)])
+ );
+ fprintf (stderr, "\n");
+ }
+}
+
+# define YY_REDUCE_PRINT(Rule) \
+do { \
+ if (yydebug) \
+ yy_reduce_print (yyvsp, Rule); \
+} while (YYID (0))
+
+/* Nonzero means print parse trace. It is left uninitialized so that
+ multiple parsers can coexist. */
+int yydebug;
+#else /* !YYDEBUG */
+# define YYDPRINTF(Args)
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
+# define YY_STACK_PRINT(Bottom, Top)
+# define YY_REDUCE_PRINT(Rule)
+#endif /* !YYDEBUG */
+
+
+/* YYINITDEPTH -- initial size of the parser's stacks. */
+#ifndef YYINITDEPTH
+# define YYINITDEPTH 200
+#endif
+
+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
+ if the built-in stack extension method is used).
+
+ Do not make this value too large; the results are undefined if
+ YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
+ evaluated with infinite-precision integer arithmetic. */
+
+#ifndef YYMAXDEPTH
+# define YYMAXDEPTH 10000
+#endif
+
+
+
+#if YYERROR_VERBOSE
+
+# ifndef yystrlen
+# if defined __GLIBC__ && defined _STRING_H
+# define yystrlen strlen
+# else
+/* Return the length of YYSTR. */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static YYSIZE_T
+yystrlen (const char *yystr)
+#else
+static YYSIZE_T
+yystrlen (yystr)
+ const char *yystr;
+#endif
+{
+ YYSIZE_T yylen;
+ for (yylen = 0; yystr[yylen]; yylen++)
+ continue;
+ return yylen;
+}
+# endif
+# endif
+
+# ifndef yystpcpy
+# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
+# define yystpcpy stpcpy
+# else
+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
+ YYDEST. */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static char *
+yystpcpy (char *yydest, const char *yysrc)
+#else
+static char *
+yystpcpy (yydest, yysrc)
+ char *yydest;
+ const char *yysrc;
+#endif
+{
+ char *yyd = yydest;
+ const char *yys = yysrc;
+
+ while ((*yyd++ = *yys++) != '\0')
+ continue;
+
+ return yyd - 1;
+}
+# endif
+# endif
+
+# ifndef yytnamerr
+/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
+ quotes and backslashes, so that it's suitable for yyerror. The
+ heuristic is that double-quoting is unnecessary unless the string
+ contains an apostrophe, a comma, or backslash (other than
+ backslash-backslash). YYSTR is taken from yytname. If YYRES is
+ null, do not copy; instead, return the length of what the result
+ would have been. */
+static YYSIZE_T
+yytnamerr (char *yyres, const char *yystr)
+{
+ if (*yystr == '"')
+ {
+ YYSIZE_T yyn = 0;
+ char const *yyp = yystr;
+
+ for (;;)
+ switch (*++yyp)
+ {
+ case '\'':
+ case ',':
+ goto do_not_strip_quotes;
+
+ case '\\':
+ if (*++yyp != '\\')
+ goto do_not_strip_quotes;
+ /* Fall through. */
+ default:
+ if (yyres)
+ yyres[yyn] = *yyp;
+ yyn++;
+ break;
+
+ case '"':
+ if (yyres)
+ yyres[yyn] = '\0';
+ return yyn;
+ }
+ do_not_strip_quotes: ;
+ }
+
+ if (! yyres)
+ return yystrlen (yystr);
+
+ return yystpcpy (yyres, yystr) - yyres;
+}
+# endif
+
+/* Copy into YYRESULT an error message about the unexpected token
+ YYCHAR while in state YYSTATE. Return the number of bytes copied,
+ including the terminating null byte. If YYRESULT is null, do not
+ copy anything; just return the number of bytes that would be
+ copied. As a special case, return 0 if an ordinary "syntax error"
+ message will do. Return YYSIZE_MAXIMUM if overflow occurs during
+ size calculation. */
+static YYSIZE_T
+yysyntax_error (char *yyresult, int yystate, int yychar)
+{
+ int yyn = yypact[yystate];
+
+ if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
+ return 0;
+ else
+ {
+ int yytype = YYTRANSLATE (yychar);
+ YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
+ YYSIZE_T yysize = yysize0;
+ YYSIZE_T yysize1;
+ int yysize_overflow = 0;
+ enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
+ char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
+ int yyx;
+
+# if 0
+ /* This is so xgettext sees the translatable formats that are
+ constructed on the fly. */
+ YY_("syntax error, unexpected %s");
+ YY_("syntax error, unexpected %s, expecting %s");
+ YY_("syntax error, unexpected %s, expecting %s or %s");
+ YY_("syntax error, unexpected %s, expecting %s or %s or %s");
+ YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
+# endif
+ char *yyfmt;
+ char const *yyf;
+ static char const yyunexpected[] = "syntax error, unexpected %s";
+ static char const yyexpecting[] = ", expecting %s";
+ static char const yyor[] = " or %s";
+ char yyformat[sizeof yyunexpected
+ + sizeof yyexpecting - 1
+ + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
+ * (sizeof yyor - 1))];
+ char const *yyprefix = yyexpecting;
+
+ /* Start YYX at -YYN if negative to avoid negative indexes in
+ YYCHECK. */
+ int yyxbegin = yyn < 0 ? -yyn : 0;
+
+ /* Stay within bounds of both yycheck and yytname. */
+ int yychecklim = YYLAST - yyn + 1;
+ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
+ int yycount = 1;
+
+ yyarg[0] = yytname[yytype];
+ yyfmt = yystpcpy (yyformat, yyunexpected);
+
+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
+ {
+ if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
+ {
+ yycount = 1;
+ yysize = yysize0;
+ yyformat[sizeof yyunexpected - 1] = '\0';
+ break;
+ }
+ yyarg[yycount++] = yytname[yyx];
+ yysize1 = yysize + yytnamerr (0, yytname[yyx]);
+ yysize_overflow |= (yysize1 < yysize);
+ yysize = yysize1;
+ yyfmt = yystpcpy (yyfmt, yyprefix);
+ yyprefix = yyor;
+ }
+
+ yyf = YY_(yyformat);
+ yysize1 = yysize + yystrlen (yyf);
+ yysize_overflow |= (yysize1 < yysize);
+ yysize = yysize1;
+
+ if (yysize_overflow)
+ return YYSIZE_MAXIMUM;
+
+ if (yyresult)
+ {
+ /* Avoid sprintf, as that infringes on the user's name space.
+ Don't have undefined behavior even if the translation
+ produced a string with the wrong number of "%s"s. */
+ char *yyp = yyresult;
+ int yyi = 0;
+ while ((*yyp = *yyf) != '\0')
+ {
+ if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
+ {
+ yyp += yytnamerr (yyp, yyarg[yyi++]);
+ yyf += 2;
+ }
+ else
+ {
+ yyp++;
+ yyf++;
+ }
+ }
+ }
+ return yysize;
+ }
+}
+#endif /* YYERROR_VERBOSE */
+
+
+/*-----------------------------------------------.
+| Release the memory associated to this symbol. |
+`-----------------------------------------------*/
+
+/*ARGSUSED*/
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep)
+#else
+static void
+yydestruct (yymsg, yytype, yyvaluep)
+ const char *yymsg;
+ int yytype;
+ YYSTYPE *yyvaluep;
+#endif
+{
+ YYUSE (yyvaluep);
+
+ if (!yymsg)
+ yymsg = "Deleting";
+ YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
+
+ switch (yytype)
+ {
+ case 51: /* "choice_entry" */
+
+ {
+ fprintf(stderr, "%s:%d: missing end statement for this entry\n",
+ (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno);
+ if (current_menu == (yyvaluep->menu))
+ menu_end_menu();
+};
+
+ break;
+ case 57: /* "if_entry" */
+
+ {
+ fprintf(stderr, "%s:%d: missing end statement for this entry\n",
+ (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno);
+ if (current_menu == (yyvaluep->menu))
+ menu_end_menu();
+};
+
+ break;
+ case 62: /* "menu_entry" */
+
+ {
+ fprintf(stderr, "%s:%d: missing end statement for this entry\n",
+ (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno);
+ if (current_menu == (yyvaluep->menu))
+ menu_end_menu();
+};
+
+ break;
+
+ default:
+ break;
+ }
+}
+
+
+/* Prevent warnings from -Wmissing-prototypes. */
+
+#ifdef YYPARSE_PARAM
+#if defined __STDC__ || defined __cplusplus
+int yyparse (void *YYPARSE_PARAM);
+#else
+int yyparse ();
+#endif
+#else /* ! YYPARSE_PARAM */
+#if defined __STDC__ || defined __cplusplus
+int yyparse (void);
+#else
+int yyparse ();
+#endif
+#endif /* ! YYPARSE_PARAM */
+
+
+
+/* The look-ahead symbol. */
+int yychar;
+
+/* The semantic value of the look-ahead symbol. */
+YYSTYPE yylval;
+
+/* Number of syntax errors so far. */
+int yynerrs;
+
+
+
+/*----------.
+| yyparse. |
+`----------*/
+
+#ifdef YYPARSE_PARAM
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+int
+yyparse (void *YYPARSE_PARAM)
+#else
+int
+yyparse (YYPARSE_PARAM)
+ void *YYPARSE_PARAM;
+#endif
+#else /* ! YYPARSE_PARAM */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+int
+yyparse (void)
+#else
+int
+yyparse ()
+
+#endif
+#endif
+{
+
+ int yystate;
+ int yyn;
+ int yyresult;
+ /* Number of tokens to shift before error messages enabled. */
+ int yyerrstatus;
+ /* Look-ahead token as an internal (translated) token number. */
+ int yytoken = 0;
+#if YYERROR_VERBOSE
+ /* Buffer for error messages, and its allocated size. */
+ char yymsgbuf[128];
+ char *yymsg = yymsgbuf;
+ YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
+#endif
+
+ /* Three stacks and their tools:
+ `yyss': related to states,
+ `yyvs': related to semantic values,
+ `yyls': related to locations.
+
+ Refer to the stacks thru separate pointers, to allow yyoverflow
+ to reallocate them elsewhere. */
+
+ /* The state stack. */
+ yytype_int16 yyssa[YYINITDEPTH];
+ yytype_int16 *yyss = yyssa;
+ yytype_int16 *yyssp;
+
+ /* The semantic value stack. */
+ YYSTYPE yyvsa[YYINITDEPTH];
+ YYSTYPE *yyvs = yyvsa;
+ YYSTYPE *yyvsp;
+
+
+
+#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N))
+
+ YYSIZE_T yystacksize = YYINITDEPTH;
+
+ /* The variables used to return semantic value and location from the
+ action routines. */
+ YYSTYPE yyval;
+
+
+ /* The number of symbols on the RHS of the reduced rule.
+ Keep to zero when no symbol should be popped. */
+ int yylen = 0;
+
+ YYDPRINTF ((stderr, "Starting parse\n"));
+
+ yystate = 0;
+ yyerrstatus = 0;
+ yynerrs = 0;
+ yychar = YYEMPTY; /* Cause a token to be read. */
+
+ /* Initialize stack pointers.
+ Waste one element of value and location stack
+ so that they stay on the same level as the state stack.
+ The wasted elements are never initialized. */
+
+ yyssp = yyss;
+ yyvsp = yyvs;
+
+ goto yysetstate;
+
+/*------------------------------------------------------------.
+| yynewstate -- Push a new state, which is found in yystate. |
+`------------------------------------------------------------*/
+ yynewstate:
+ /* In all cases, when you get here, the value and location stacks
+ have just been pushed. So pushing a state here evens the stacks. */
+ yyssp++;
+
+ yysetstate:
+ *yyssp = yystate;
+
+ if (yyss + yystacksize - 1 <= yyssp)
+ {
+ /* Get the current used size of the three stacks, in elements. */
+ YYSIZE_T yysize = yyssp - yyss + 1;
+
+#ifdef yyoverflow
+ {
+ /* Give user a chance to reallocate the stack. Use copies of
+ these so that the &'s don't force the real ones into
+ memory. */
+ YYSTYPE *yyvs1 = yyvs;
+ yytype_int16 *yyss1 = yyss;
+
+
+ /* Each stack pointer address is followed by the size of the
+ data in use in that stack, in bytes. This used to be a
+ conditional around just the two extra args, but that might
+ be undefined if yyoverflow is a macro. */
+ yyoverflow (YY_("memory exhausted"),
+ &yyss1, yysize * sizeof (*yyssp),
+ &yyvs1, yysize * sizeof (*yyvsp),
+
+ &yystacksize);
+
+ yyss = yyss1;
+ yyvs = yyvs1;
+ }
+#else /* no yyoverflow */
+# ifndef YYSTACK_RELOCATE
+ goto yyexhaustedlab;
+# else
+ /* Extend the stack our own way. */
+ if (YYMAXDEPTH <= yystacksize)
+ goto yyexhaustedlab;
+ yystacksize *= 2;
+ if (YYMAXDEPTH < yystacksize)
+ yystacksize = YYMAXDEPTH;
+
+ {
+ yytype_int16 *yyss1 = yyss;
+ union yyalloc *yyptr =
+ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
+ if (! yyptr)
+ goto yyexhaustedlab;
+ YYSTACK_RELOCATE (yyss);
+ YYSTACK_RELOCATE (yyvs);
+
+# undef YYSTACK_RELOCATE
+ if (yyss1 != yyssa)
+ YYSTACK_FREE (yyss1);
+ }
+# endif
+#endif /* no yyoverflow */
+
+ yyssp = yyss + yysize - 1;
+ yyvsp = yyvs + yysize - 1;
+
+
+ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
+ (unsigned long int) yystacksize));
+
+ if (yyss + yystacksize - 1 <= yyssp)
+ YYABORT;
+ }
+
+ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+
+ goto yybackup;
+
+/*-----------.
+| yybackup. |
+`-----------*/
+yybackup:
+
+ /* Do appropriate processing given the current state. Read a
+ look-ahead token if we need one and don't already have one. */
+
+ /* First try to decide what to do without reference to look-ahead token. */
+ yyn = yypact[yystate];
+ if (yyn == YYPACT_NINF)
+ goto yydefault;
+
+ /* Not known => get a look-ahead token if don't already have one. */
+
+ /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */
+ if (yychar == YYEMPTY)
+ {
+ YYDPRINTF ((stderr, "Reading a token: "));
+ yychar = YYLEX;
+ }
+
+ if (yychar <= YYEOF)
+ {
+ yychar = yytoken = YYEOF;
+ YYDPRINTF ((stderr, "Now at end of input.\n"));
+ }
+ else
+ {
+ yytoken = YYTRANSLATE (yychar);
+ YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
+ }
+
+ /* If the proper action on seeing token YYTOKEN is to reduce or to
+ detect an error, take that action. */
+ yyn += yytoken;
+ if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
+ goto yydefault;
+ yyn = yytable[yyn];
+ if (yyn <= 0)
+ {
+ if (yyn == 0 || yyn == YYTABLE_NINF)
+ goto yyerrlab;
+ yyn = -yyn;
+ goto yyreduce;
+ }
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ /* Count tokens shifted since error; after three, turn off error
+ status. */
+ if (yyerrstatus)
+ yyerrstatus--;
+
+ /* Shift the look-ahead token. */
+ YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
+
+ /* Discard the shifted token unless it is eof. */
+ if (yychar != YYEOF)
+ yychar = YYEMPTY;
+
+ yystate = yyn;
+ *++yyvsp = yylval;
+
+ goto yynewstate;
+
+
+/*-----------------------------------------------------------.
+| yydefault -- do the default action for the current state. |
+`-----------------------------------------------------------*/
+yydefault:
+ yyn = yydefact[yystate];
+ if (yyn == 0)
+ goto yyerrlab;
+ goto yyreduce;
+
+
+/*-----------------------------.
+| yyreduce -- Do a reduction. |
+`-----------------------------*/
+yyreduce:
+ /* yyn is the number of a rule to reduce with. */
+ yylen = yyr2[yyn];
+
+ /* If YYLEN is nonzero, implement the default value of the action:
+ `$$ = $1'.
+
+ Otherwise, the following line sets YYVAL to garbage.
+ This behavior is undocumented and Bison
+ users should not rely upon it. Assigning to YYVAL
+ unconditionally makes the parser a bit smaller, and it avoids a
+ GCC warning that YYVAL may be used uninitialized. */
+ yyval = yyvsp[1-yylen];
+
+
+ YY_REDUCE_PRINT (yyn);
+ switch (yyn)
+ {
+ case 8:
+
+ { zconf_error("unexpected end statement"); ;}
+ break;
+
+ case 9:
+
+ { zconf_error("unknown statement \"%s\"", (yyvsp[(2) - (4)].string)); ;}
+ break;
+
+ case 10:
+
+ {
+ zconf_error("unexpected option \"%s\"", kconf_id_strings + (yyvsp[(2) - (4)].id)->name);
+;}
+ break;
+
+ case 11:
+
+ { zconf_error("invalid statement"); ;}
+ break;
+
+ case 25:
+
+ { zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); ;}
+ break;
+
+ case 26:
+
+ { zconf_error("invalid option"); ;}
+ break;
+
+ case 27:
+
+ {
+ struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
+ sym->flags |= SYMBOL_OPTIONAL;
+ menu_add_entry(sym);
+ printd(DEBUG_PARSE, "%s:%d:config %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
+;}
+ break;
+
+ case 28:
+
+ {
+ menu_end_entry();
+ printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 29:
+
+ {
+ struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
+ sym->flags |= SYMBOL_OPTIONAL;
+ menu_add_entry(sym);
+ printd(DEBUG_PARSE, "%s:%d:menuconfig %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
+;}
+ break;
+
+ case 30:
+
+ {
+ if (current_entry->prompt)
+ current_entry->prompt->type = P_MENU;
+ else
+ zconfprint("warning: menuconfig statement without prompt");
+ menu_end_entry();
+ printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 38:
+
+ {
+ menu_set_type((yyvsp[(1) - (3)].id)->stype);
+ printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
+ zconf_curname(), zconf_lineno(),
+ (yyvsp[(1) - (3)].id)->stype);
+;}
+ break;
+
+ case 39:
+
+ {
+ menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
+ printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 40:
+
+ {
+ menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr));
+ if ((yyvsp[(1) - (4)].id)->stype != S_UNKNOWN)
+ menu_set_type((yyvsp[(1) - (4)].id)->stype);
+ printd(DEBUG_PARSE, "%s:%d:default(%u)\n",
+ zconf_curname(), zconf_lineno(),
+ (yyvsp[(1) - (4)].id)->stype);
+;}
+ break;
+
+ case 41:
+
+ {
+ menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr));
+ printd(DEBUG_PARSE, "%s:%d:select\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 42:
+
+ {
+ menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr));
+ printd(DEBUG_PARSE, "%s:%d:range\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 45:
+
+ {
+ struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string)));
+ if (id && id->flags & TF_OPTION)
+ menu_add_option(id->token, (yyvsp[(3) - (3)].string));
+ else
+ zconfprint("warning: ignoring unknown option %s", (yyvsp[(2) - (3)].string));
+ free((yyvsp[(2) - (3)].string));
+;}
+ break;
+
+ case 46:
+
+ { (yyval.string) = NULL; ;}
+ break;
+
+ case 47:
+
+ { (yyval.string) = (yyvsp[(2) - (2)].string); ;}
+ break;
+
+ case 48:
+
+ {
+ struct symbol *sym = sym_lookup(NULL, 0);
+ sym->flags |= SYMBOL_CHOICE;
+ menu_add_entry(sym);
+ menu_add_expr(P_CHOICE, NULL, NULL);
+ printd(DEBUG_PARSE, "%s:%d:choice\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 49:
+
+ {
+ (yyval.menu) = menu_add_menu();
+;}
+ break;
+
+ case 50:
+
+ {
+ if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) {
+ menu_end_menu();
+ printd(DEBUG_PARSE, "%s:%d:endchoice\n", zconf_curname(), zconf_lineno());
+ }
+;}
+ break;
+
+ case 58:
+
+ {
+ menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
+ printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 59:
+
+ {
+ if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) {
+ menu_set_type((yyvsp[(1) - (3)].id)->stype);
+ printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
+ zconf_curname(), zconf_lineno(),
+ (yyvsp[(1) - (3)].id)->stype);
+ } else
+ YYERROR;
+;}
+ break;
+
+ case 60:
+
+ {
+ current_entry->sym->flags |= SYMBOL_OPTIONAL;
+ printd(DEBUG_PARSE, "%s:%d:optional\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 61:
+
+ {
+ if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) {
+ menu_add_symbol(P_DEFAULT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr));
+ printd(DEBUG_PARSE, "%s:%d:default\n",
+ zconf_curname(), zconf_lineno());
+ } else
+ YYERROR;
+;}
+ break;
+
+ case 64:
+
+ {
+ printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
+ menu_add_entry(NULL);
+ menu_add_dep((yyvsp[(2) - (3)].expr));
+ (yyval.menu) = menu_add_menu();
+;}
+ break;
+
+ case 65:
+
+ {
+ if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) {
+ menu_end_menu();
+ printd(DEBUG_PARSE, "%s:%d:endif\n", zconf_curname(), zconf_lineno());
+ }
+;}
+ break;
+
+ case 71:
+
+ {
+ menu_add_entry(NULL);
+ menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL);
+ printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 72:
+
+ {
+ (yyval.menu) = menu_add_menu();
+;}
+ break;
+
+ case 73:
+
+ {
+ if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) {
+ menu_end_menu();
+ printd(DEBUG_PARSE, "%s:%d:endmenu\n", zconf_curname(), zconf_lineno());
+ }
+;}
+ break;
+
+ case 79:
+
+ {
+ printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
+ zconf_nextfile((yyvsp[(2) - (3)].string));
+;}
+ break;
+
+ case 80:
+
+ {
+ menu_add_entry(NULL);
+ menu_add_prompt(P_COMMENT, (yyvsp[(2) - (3)].string), NULL);
+ printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 81:
+
+ {
+ menu_end_entry();
+;}
+ break;
+
+ case 82:
+
+ {
+ printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno());
+ zconf_starthelp();
+;}
+ break;
+
+ case 83:
+
+ {
+ current_entry->help = (yyvsp[(2) - (2)].string);
+;}
+ break;
+
+ case 88:
+
+ {
+ menu_add_dep((yyvsp[(3) - (4)].expr));
+ printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
+;}
+ break;
+
+ case 90:
+
+ {
+ menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr));
+;}
+ break;
+
+ case 93:
+
+ { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
+ break;
+
+ case 94:
+
+ { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
+ break;
+
+ case 95:
+
+ { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
+ break;
+
+ case 98:
+
+ { (yyval.expr) = NULL; ;}
+ break;
+
+ case 99:
+
+ { (yyval.expr) = (yyvsp[(2) - (2)].expr); ;}
+ break;
+
+ case 100:
+
+ { (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); ;}
+ break;
+
+ case 101:
+
+ { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
+ break;
+
+ case 102:
+
+ { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
+ break;
+
+ case 103:
+
+ { (yyval.expr) = (yyvsp[(2) - (3)].expr); ;}
+ break;
+
+ case 104:
+
+ { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); ;}
+ break;
+
+ case 105:
+
+ { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
+ break;
+
+ case 106:
+
+ { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
+ break;
+
+ case 107:
+
+ { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); ;}
+ break;
+
+ case 108:
+
+ { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 1); free((yyvsp[(1) - (1)].string)); ;}
+ break;
+
+
+/* Line 1267 of yacc.c. */
+
+ default: break;
+ }
+ YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
+
+ YYPOPSTACK (yylen);
+ yylen = 0;
+ YY_STACK_PRINT (yyss, yyssp);
+
+ *++yyvsp = yyval;
+
+
+ /* Now `shift' the result of the reduction. Determine what state
+ that goes to, based on the state we popped back to and the rule
+ number reduced by. */
+
+ yyn = yyr1[yyn];
+
+ yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
+ if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
+ yystate = yytable[yystate];
+ else
+ yystate = yydefgoto[yyn - YYNTOKENS];
+
+ goto yynewstate;
+
+
+/*------------------------------------.
+| yyerrlab -- here on detecting error |
+`------------------------------------*/
+yyerrlab:
+ /* If not already recovering from an error, report this error. */
+ if (!yyerrstatus)
+ {
+ ++yynerrs;
+#if ! YYERROR_VERBOSE
+ yyerror (YY_("syntax error"));
+#else
+ {
+ YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
+ if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
+ {
+ YYSIZE_T yyalloc = 2 * yysize;
+ if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
+ yyalloc = YYSTACK_ALLOC_MAXIMUM;
+ if (yymsg != yymsgbuf)
+ YYSTACK_FREE (yymsg);
+ yymsg = (char *) YYSTACK_ALLOC (yyalloc);
+ if (yymsg)
+ yymsg_alloc = yyalloc;
+ else
+ {
+ yymsg = yymsgbuf;
+ yymsg_alloc = sizeof yymsgbuf;
+ }
+ }
+
+ if (0 < yysize && yysize <= yymsg_alloc)
+ {
+ (void) yysyntax_error (yymsg, yystate, yychar);
+ yyerror (yymsg);
+ }
+ else
+ {
+ yyerror (YY_("syntax error"));
+ if (yysize != 0)
+ goto yyexhaustedlab;
+ }
+ }
+#endif
+ }
+
+
+
+ if (yyerrstatus == 3)
+ {
+ /* If just tried and failed to reuse look-ahead token after an
+ error, discard it. */
+
+ if (yychar <= YYEOF)
+ {
+ /* Return failure if at end of input. */
+ if (yychar == YYEOF)
+ YYABORT;
+ }
+ else
+ {
+ yydestruct ("Error: discarding",
+ yytoken, &yylval);
+ yychar = YYEMPTY;
+ }
+ }
+
+ /* Else will try to reuse look-ahead token after shifting the error
+ token. */
+ goto yyerrlab1;
+
+
+/*---------------------------------------------------.
+| yyerrorlab -- error raised explicitly by YYERROR. |
+`---------------------------------------------------*/
+yyerrorlab:
+
+ /* Pacify compilers like GCC when the user code never invokes
+ YYERROR and the label yyerrorlab therefore never appears in user
+ code. */
+ if (/*CONSTCOND*/ 0)
+ goto yyerrorlab;
+
+ /* Do not reclaim the symbols of the rule which action triggered
+ this YYERROR. */
+ YYPOPSTACK (yylen);
+ yylen = 0;
+ YY_STACK_PRINT (yyss, yyssp);
+ yystate = *yyssp;
+ goto yyerrlab1;
+
+
+/*-------------------------------------------------------------.
+| yyerrlab1 -- common code for both syntax error and YYERROR. |
+`-------------------------------------------------------------*/
+yyerrlab1:
+ yyerrstatus = 3; /* Each real token shifted decrements this. */
+
+ for (;;)
+ {
+ yyn = yypact[yystate];
+ if (yyn != YYPACT_NINF)
+ {
+ yyn += YYTERROR;
+ if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
+ {
+ yyn = yytable[yyn];
+ if (0 < yyn)
+ break;
+ }
+ }
+
+ /* Pop the current state because it cannot handle the error token. */
+ if (yyssp == yyss)
+ YYABORT;
+
+
+ yydestruct ("Error: popping",
+ yystos[yystate], yyvsp);
+ YYPOPSTACK (1);
+ yystate = *yyssp;
+ YY_STACK_PRINT (yyss, yyssp);
+ }
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ *++yyvsp = yylval;
+
+
+ /* Shift the error token. */
+ YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
+
+ yystate = yyn;
+ goto yynewstate;
+
+
+/*-------------------------------------.
+| yyacceptlab -- YYACCEPT comes here. |
+`-------------------------------------*/
+yyacceptlab:
+ yyresult = 0;
+ goto yyreturn;
+
+/*-----------------------------------.
+| yyabortlab -- YYABORT comes here. |
+`-----------------------------------*/
+yyabortlab:
+ yyresult = 1;
+ goto yyreturn;
+
+#ifndef yyoverflow
+/*-------------------------------------------------.
+| yyexhaustedlab -- memory exhaustion comes here. |
+`-------------------------------------------------*/
+yyexhaustedlab:
+ yyerror (YY_("memory exhausted"));
+ yyresult = 2;
+ /* Fall through. */
+#endif
+
+yyreturn:
+ if (yychar != YYEOF && yychar != YYEMPTY)
+ yydestruct ("Cleanup: discarding lookahead",
+ yytoken, &yylval);
+ /* Do not reclaim the symbols of the rule which action triggered
+ this YYABORT or YYACCEPT. */
+ YYPOPSTACK (yylen);
+ YY_STACK_PRINT (yyss, yyssp);
+ while (yyssp != yyss)
+ {
+ yydestruct ("Cleanup: popping",
+ yystos[*yyssp], yyvsp);
+ YYPOPSTACK (1);
+ }
+#ifndef yyoverflow
+ if (yyss != yyssa)
+ YYSTACK_FREE (yyss);
+#endif
+#if YYERROR_VERBOSE
+ if (yymsg != yymsgbuf)
+ YYSTACK_FREE (yymsg);
+#endif
+ /* Make sure YYID is used. */
+ return YYID (yyresult);
+}
+
+
+
+
+
+void conf_parse(const char *name)
+{
+ struct symbol *sym;
+ int i;
+
+ zconf_initscan(name);
+
+ sym_init();
+ menu_init();
+ modules_sym = sym_lookup(NULL, 0);
+ modules_sym->type = S_BOOLEAN;
+ modules_sym->flags |= SYMBOL_AUTO;
+ rootmenu.prompt = menu_add_prompt(P_MENU, "coreboot Configuration", NULL);
+
+#if YYDEBUG
+ if (getenv("ZCONF_DEBUG"))
+ zconfdebug = 1;
+#endif
+ zconfparse();
+ if (zconfnerrs)
+ exit(1);
+ if (!modules_sym->prop) {
+ struct property *prop;
+
+ prop = prop_alloc(P_DEFAULT, modules_sym);
+ prop->expr = expr_alloc_symbol(sym_lookup("MODULES", 0));
+ }
+ menu_finalize(&rootmenu);
+ for_all_symbols(i, sym) {
+ if (sym_check_deps(sym))
+ zconfnerrs++;
+ }
+ if (zconfnerrs)
+ exit(1);
+ sym_set_change_count(1);
+}
+
+const char *zconf_tokenname(int token)
+{
+ switch (token) {
+ case T_MENU: return "menu";
+ case T_ENDMENU: return "endmenu";
+ case T_CHOICE: return "choice";
+ case T_ENDCHOICE: return "endchoice";
+ case T_IF: return "if";
+ case T_ENDIF: return "endif";
+ case T_DEPENDS: return "depends";
+ }
+ return "<token>";
+}
+
+static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken)
+{
+ if (id->token != endtoken) {
+ zconf_error("unexpected '%s' within %s block",
+ kconf_id_strings + id->name, zconf_tokenname(starttoken));
+ zconfnerrs++;
+ return false;
+ }
+ if (current_menu->file != current_file) {
+ zconf_error("'%s' in different file than '%s'",
+ kconf_id_strings + id->name, zconf_tokenname(starttoken));
+ fprintf(stderr, "%s:%d: location of the '%s'\n",
+ current_menu->file->name, current_menu->lineno,
+ zconf_tokenname(starttoken));
+ zconfnerrs++;
+ return false;
+ }
+ return true;
+}
+
+static void zconfprint(const char *err, ...)
+{
+ va_list ap;
+
+ fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno());
+ va_start(ap, err);
+ vfprintf(stderr, err, ap);
+ va_end(ap);
+ fprintf(stderr, "\n");
+}
+
+static void zconf_error(const char *err, ...)
+{
+ va_list ap;
+
+ zconfnerrs++;
+ fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno());
+ va_start(ap, err);
+ vfprintf(stderr, err, ap);
+ va_end(ap);
+ fprintf(stderr, "\n");
+}
+
+static void zconferror(const char *err)
+{
+#if YYDEBUG
+ fprintf(stderr, "%s:%d: %s\n", zconf_curname(), zconf_lineno() + 1, err);
+#endif
+}
+
+void print_quoted_string(FILE *out, const char *str)
+{
+ const char *p;
+ int len;
+
+ putc('"', out);
+ while ((p = strchr(str, '"'))) {
+ len = p - str;
+ if (len)
+ fprintf(out, "%.*s", len, str);
+ fputs("\\\"", out);
+ str = p + 1;
+ }
+ fputs(str, out);
+ putc('"', out);
+}
+
+void print_symbol(FILE *out, struct menu *menu)
+{
+ struct symbol *sym = menu->sym;
+ struct property *prop;
+
+ if (sym_is_choice(sym))
+ fprintf(out, "choice\n");
+ else
+ fprintf(out, "config %s\n", sym->name);
+ switch (sym->type) {
+ case S_BOOLEAN:
+ fputs(" boolean\n", out);
+ break;
+ case S_TRISTATE:
+ fputs(" tristate\n", out);
+ break;
+ case S_STRING:
+ fputs(" string\n", out);
+ break;
+ case S_INT:
+ fputs(" integer\n", out);
+ break;
+ case S_HEX:
+ fputs(" hex\n", out);
+ break;
+ default:
+ fputs(" ???\n", out);
+ break;
+ }
+ for (prop = sym->prop; prop; prop = prop->next) {
+ if (prop->menu != menu)
+ continue;
+ switch (prop->type) {
+ case P_PROMPT:
+ fputs(" prompt ", out);
+ print_quoted_string(out, prop->text);
+ if (!expr_is_yes(prop->visible.expr)) {
+ fputs(" if ", out);
+ expr_fprint(prop->visible.expr, out);
+ }
+ fputc('\n', out);
+ break;
+ case P_DEFAULT:
+ fputs( " default ", out);
+ expr_fprint(prop->expr, out);
+ if (!expr_is_yes(prop->visible.expr)) {
+ fputs(" if ", out);
+ expr_fprint(prop->visible.expr, out);
+ }
+ fputc('\n', out);
+ break;
+ case P_CHOICE:
+ fputs(" #choice value\n", out);
+ break;
+ default:
+ fprintf(out, " unknown prop %d!\n", prop->type);
+ break;
+ }
+ }
+ if (menu->help) {
+ int len = strlen(menu->help);
+ while (menu->help[--len] == '\n')
+ menu->help[len] = 0;
+ fprintf(out, " help\n%s\n", menu->help);
+ }
+ fputc('\n', out);
+}
+
+void zconfdump(FILE *out)
+{
+ struct property *prop;
+ struct symbol *sym;
+ struct menu *menu;
+
+ menu = rootmenu.list;
+ while (menu) {
+ if ((sym = menu->sym))
+ print_symbol(out, menu);
+ else if ((prop = menu->prompt)) {
+ switch (prop->type) {
+ case P_COMMENT:
+ fputs("\ncomment ", out);
+ print_quoted_string(out, prop->text);
+ fputs("\n", out);
+ break;
+ case P_MENU:
+ fputs("\nmenu ", out);
+ print_quoted_string(out, prop->text);
+ fputs("\n", out);
+ break;
+ default:
+ ;
+ }
+ if (!expr_is_yes(prop->visible.expr)) {
+ fputs(" depends ", out);
+ expr_fprint(prop->visible.expr, out);
+ fputc('\n', out);
+ }
+ fputs("\n", out);
+ }
+
+ if (menu->list)
+ menu = menu->list;
+ else if (menu->next)
+ menu = menu->next;
+ else while ((menu = menu->parent)) {
+ if (menu->prompt && menu->prompt->type == P_MENU)
+ fputs("\nendmenu\n", out);
+ if (menu->next) {
+ menu = menu->next;
+ break;
+ }
+ }
+ }
+}
+
+#include "lex.zconf.c"
+#include "util.c"
+#include "confdata.c"
+#include "expr.c"
+#include "symbol.c"
+#include "menu.c"
+
diff --git a/util/kconfig/zconf.y b/util/kconfig/zconf.y
new file mode 100644
index 0000000..eac13c3
--- /dev/null
+++ b/util/kconfig/zconf.y
@@ -0,0 +1,703 @@
+%{
+/*
+ * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <ctype.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdbool.h>
+
+#define LKC_DIRECT_LINK
+#include "lkc.h"
+
+#include "zconf.hash.c"
+
+#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt)
+
+#define PRINTD 0x0001
+#define DEBUG_PARSE 0x0002
+
+int cdebug = PRINTD;
+
+extern int zconflex(void);
+static void zconfprint(const char *err, ...);
+static void zconf_error(const char *err, ...);
+static void zconferror(const char *err);
+static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken);
+
+struct symbol *symbol_hash[257];
+
+static struct menu *current_menu, *current_entry;
+
+#define YYDEBUG 0
+#if YYDEBUG
+#define YYERROR_VERBOSE
+#endif
+%}
+%expect 26
+
+%union
+{
+ char *string;
+ struct file *file;
+ struct symbol *symbol;
+ struct expr *expr;
+ struct menu *menu;
+ struct kconf_id *id;
+}
+
+%token <id>T_MAINMENU
+%token <id>T_MENU
+%token <id>T_ENDMENU
+%token <id>T_SOURCE
+%token <id>T_CHOICE
+%token <id>T_ENDCHOICE
+%token <id>T_COMMENT
+%token <id>T_CONFIG
+%token <id>T_MENUCONFIG
+%token <id>T_HELP
+%token <string> T_HELPTEXT
+%token <id>T_IF
+%token <id>T_ENDIF
+%token <id>T_DEPENDS
+%token <id>T_OPTIONAL
+%token <id>T_PROMPT
+%token <id>T_TYPE
+%token <id>T_DEFAULT
+%token <id>T_SELECT
+%token <id>T_RANGE
+%token <id>T_OPTION
+%token <id>T_ON
+%token <string> T_WORD
+%token <string> T_WORD_QUOTE
+%token T_UNEQUAL
+%token T_CLOSE_PAREN
+%token T_OPEN_PAREN
+%token T_EOL
+
+%left T_OR
+%left T_AND
+%left T_EQUAL T_UNEQUAL
+%nonassoc T_NOT
+
+%type <string> prompt
+%type <symbol> symbol
+%type <expr> expr
+%type <expr> if_expr
+%type <id> end
+%type <id> option_name
+%type <menu> if_entry menu_entry choice_entry
+%type <string> symbol_option_arg
+
+%destructor {
+ fprintf(stderr, "%s:%d: missing end statement for this entry\n",
+ $$->file->name, $$->lineno);
+ if (current_menu == $$)
+ menu_end_menu();
+} if_entry menu_entry choice_entry
+
+%%
+input: stmt_list;
+
+stmt_list:
+ /* empty */
+ | stmt_list common_stmt
+ | stmt_list choice_stmt
+ | stmt_list menu_stmt
+ | stmt_list T_MAINMENU prompt nl
+ | stmt_list end { zconf_error("unexpected end statement"); }
+ | stmt_list T_WORD error T_EOL { zconf_error("unknown statement \"%s\"", $2); }
+ | stmt_list option_name error T_EOL
+{
+ zconf_error("unexpected option \"%s\"", kconf_id_strings + $2->name);
+}
+ | stmt_list error T_EOL { zconf_error("invalid statement"); }
+;
+
+option_name:
+ T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT
+;
+
+common_stmt:
+ T_EOL
+ | if_stmt
+ | comment_stmt
+ | config_stmt
+ | menuconfig_stmt
+ | source_stmt
+;
+
+option_error:
+ T_WORD error T_EOL { zconf_error("unknown option \"%s\"", $1); }
+ | error T_EOL { zconf_error("invalid option"); }
+;
+
+
+/* config/menuconfig entry */
+
+config_entry_start: T_CONFIG T_WORD T_EOL
+{
+ struct symbol *sym = sym_lookup($2, 0);
+ sym->flags |= SYMBOL_OPTIONAL;
+ menu_add_entry(sym);
+ printd(DEBUG_PARSE, "%s:%d:config %s\n", zconf_curname(), zconf_lineno(), $2);
+};
+
+config_stmt: config_entry_start config_option_list
+{
+ menu_end_entry();
+ printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
+};
+
+menuconfig_entry_start: T_MENUCONFIG T_WORD T_EOL
+{
+ struct symbol *sym = sym_lookup($2, 0);
+ sym->flags |= SYMBOL_OPTIONAL;
+ menu_add_entry(sym);
+ printd(DEBUG_PARSE, "%s:%d:menuconfig %s\n", zconf_curname(), zconf_lineno(), $2);
+};
+
+menuconfig_stmt: menuconfig_entry_start config_option_list
+{
+ if (current_entry->prompt)
+ current_entry->prompt->type = P_MENU;
+ else
+ zconfprint("warning: menuconfig statement without prompt");
+ menu_end_entry();
+ printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
+};
+
+config_option_list:
+ /* empty */
+ | config_option_list config_option
+ | config_option_list symbol_option
+ | config_option_list depends
+ | config_option_list help
+ | config_option_list option_error
+ | config_option_list T_EOL
+;
+
+config_option: T_TYPE prompt_stmt_opt T_EOL
+{
+ menu_set_type($1->stype);
+ printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
+ zconf_curname(), zconf_lineno(),
+ $1->stype);
+};
+
+config_option: T_PROMPT prompt if_expr T_EOL
+{
+ menu_add_prompt(P_PROMPT, $2, $3);
+ printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
+};
+
+config_option: T_DEFAULT expr if_expr T_EOL
+{
+ menu_add_expr(P_DEFAULT, $2, $3);
+ if ($1->stype != S_UNKNOWN)
+ menu_set_type($1->stype);
+ printd(DEBUG_PARSE, "%s:%d:default(%u)\n",
+ zconf_curname(), zconf_lineno(),
+ $1->stype);
+};
+
+config_option: T_SELECT T_WORD if_expr T_EOL
+{
+ menu_add_symbol(P_SELECT, sym_lookup($2, 0), $3);
+ printd(DEBUG_PARSE, "%s:%d:select\n", zconf_curname(), zconf_lineno());
+};
+
+config_option: T_RANGE symbol symbol if_expr T_EOL
+{
+ menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,$2, $3), $4);
+ printd(DEBUG_PARSE, "%s:%d:range\n", zconf_curname(), zconf_lineno());
+};
+
+symbol_option: T_OPTION symbol_option_list T_EOL
+;
+
+symbol_option_list:
+ /* empty */
+ | symbol_option_list T_WORD symbol_option_arg
+{
+ struct kconf_id *id = kconf_id_lookup($2, strlen($2));
+ if (id && id->flags & TF_OPTION)
+ menu_add_option(id->token, $3);
+ else
+ zconfprint("warning: ignoring unknown option %s", $2);
+ free($2);
+};
+
+symbol_option_arg:
+ /* empty */ { $$ = NULL; }
+ | T_EQUAL prompt { $$ = $2; }
+;
+
+/* choice entry */
+
+choice: T_CHOICE T_EOL
+{
+ struct symbol *sym = sym_lookup(NULL, 0);
+ sym->flags |= SYMBOL_CHOICE;
+ menu_add_entry(sym);
+ menu_add_expr(P_CHOICE, NULL, NULL);
+ printd(DEBUG_PARSE, "%s:%d:choice\n", zconf_curname(), zconf_lineno());
+};
+
+choice_entry: choice choice_option_list
+{
+ $$ = menu_add_menu();
+};
+
+choice_end: end
+{
+ if (zconf_endtoken($1, T_CHOICE, T_ENDCHOICE)) {
+ menu_end_menu();
+ printd(DEBUG_PARSE, "%s:%d:endchoice\n", zconf_curname(), zconf_lineno());
+ }
+};
+
+choice_stmt: choice_entry choice_block choice_end
+;
+
+choice_option_list:
+ /* empty */
+ | choice_option_list choice_option
+ | choice_option_list depends
+ | choice_option_list help
+ | choice_option_list T_EOL
+ | choice_option_list option_error
+;
+
+choice_option: T_PROMPT prompt if_expr T_EOL
+{
+ menu_add_prompt(P_PROMPT, $2, $3);
+ printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
+};
+
+choice_option: T_TYPE prompt_stmt_opt T_EOL
+{
+ if ($1->stype == S_BOOLEAN || $1->stype == S_TRISTATE) {
+ menu_set_type($1->stype);
+ printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
+ zconf_curname(), zconf_lineno(),
+ $1->stype);
+ } else
+ YYERROR;
+};
+
+choice_option: T_OPTIONAL T_EOL
+{
+ current_entry->sym->flags |= SYMBOL_OPTIONAL;
+ printd(DEBUG_PARSE, "%s:%d:optional\n", zconf_curname(), zconf_lineno());
+};
+
+choice_option: T_DEFAULT T_WORD if_expr T_EOL
+{
+ if ($1->stype == S_UNKNOWN) {
+ menu_add_symbol(P_DEFAULT, sym_lookup($2, 0), $3);
+ printd(DEBUG_PARSE, "%s:%d:default\n",
+ zconf_curname(), zconf_lineno());
+ } else
+ YYERROR;
+};
+
+choice_block:
+ /* empty */
+ | choice_block common_stmt
+;
+
+/* if entry */
+
+if_entry: T_IF expr nl
+{
+ printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
+ menu_add_entry(NULL);
+ menu_add_dep($2);
+ $$ = menu_add_menu();
+};
+
+if_end: end
+{
+ if (zconf_endtoken($1, T_IF, T_ENDIF)) {
+ menu_end_menu();
+ printd(DEBUG_PARSE, "%s:%d:endif\n", zconf_curname(), zconf_lineno());
+ }
+};
+
+if_stmt: if_entry if_block if_end
+;
+
+if_block:
+ /* empty */
+ | if_block common_stmt
+ | if_block menu_stmt
+ | if_block choice_stmt
+;
+
+/* menu entry */
+
+menu: T_MENU prompt T_EOL
+{
+ menu_add_entry(NULL);
+ menu_add_prompt(P_MENU, $2, NULL);
+ printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
+};
+
+menu_entry: menu depends_list
+{
+ $$ = menu_add_menu();
+};
+
+menu_end: end
+{
+ if (zconf_endtoken($1, T_MENU, T_ENDMENU)) {
+ menu_end_menu();
+ printd(DEBUG_PARSE, "%s:%d:endmenu\n", zconf_curname(), zconf_lineno());
+ }
+};
+
+menu_stmt: menu_entry menu_block menu_end
+;
+
+menu_block:
+ /* empty */
+ | menu_block common_stmt
+ | menu_block menu_stmt
+ | menu_block choice_stmt
+;
+
+source_stmt: T_SOURCE prompt T_EOL
+{
+ printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), $2);
+ zconf_nextfile($2);
+};
+
+/* comment entry */
+
+comment: T_COMMENT prompt T_EOL
+{
+ menu_add_entry(NULL);
+ menu_add_prompt(P_COMMENT, $2, NULL);
+ printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
+};
+
+comment_stmt: comment depends_list
+{
+ menu_end_entry();
+};
+
+/* help option */
+
+help_start: T_HELP T_EOL
+{
+ printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno());
+ zconf_starthelp();
+};
+
+help: help_start T_HELPTEXT
+{
+ current_entry->help = $2;
+};
+
+/* depends option */
+
+depends_list:
+ /* empty */
+ | depends_list depends
+ | depends_list T_EOL
+ | depends_list option_error
+;
+
+depends: T_DEPENDS T_ON expr T_EOL
+{
+ menu_add_dep($3);
+ printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
+};
+
+/* prompt statement */
+
+prompt_stmt_opt:
+ /* empty */
+ | prompt if_expr
+{
+ menu_add_prompt(P_PROMPT, $1, $2);
+};
+
+prompt: T_WORD
+ | T_WORD_QUOTE
+;
+
+end: T_ENDMENU T_EOL { $$ = $1; }
+ | T_ENDCHOICE T_EOL { $$ = $1; }
+ | T_ENDIF T_EOL { $$ = $1; }
+;
+
+nl:
+ T_EOL
+ | nl T_EOL
+;
+
+if_expr: /* empty */ { $$ = NULL; }
+ | T_IF expr { $$ = $2; }
+;
+
+expr: symbol { $$ = expr_alloc_symbol($1); }
+ | symbol T_EQUAL symbol { $$ = expr_alloc_comp(E_EQUAL, $1, $3); }
+ | symbol T_UNEQUAL symbol { $$ = expr_alloc_comp(E_UNEQUAL, $1, $3); }
+ | T_OPEN_PAREN expr T_CLOSE_PAREN { $$ = $2; }
+ | T_NOT expr { $$ = expr_alloc_one(E_NOT, $2); }
+ | expr T_OR expr { $$ = expr_alloc_two(E_OR, $1, $3); }
+ | expr T_AND expr { $$ = expr_alloc_two(E_AND, $1, $3); }
+;
+
+symbol: T_WORD { $$ = sym_lookup($1, 0); free($1); }
+ | T_WORD_QUOTE { $$ = sym_lookup($1, 1); free($1); }
+;
+
+%%
+
+void conf_parse(const char *name)
+{
+ struct symbol *sym;
+ int i;
+
+ zconf_initscan(name);
+
+ sym_init();
+ menu_init();
+ modules_sym = sym_lookup(NULL, 0);
+ modules_sym->type = S_BOOLEAN;
+ modules_sym->flags |= SYMBOL_AUTO;
+ rootmenu.prompt = menu_add_prompt(P_MENU, "coreboot Configuration", NULL);
+
+#if YYDEBUG
+ if (getenv("ZCONF_DEBUG"))
+ zconfdebug = 1;
+#endif
+ zconfparse();
+ if (zconfnerrs)
+ exit(1);
+ if (!modules_sym->prop) {
+ struct property *prop;
+
+ prop = prop_alloc(P_DEFAULT, modules_sym);
+ prop->expr = expr_alloc_symbol(sym_lookup("MODULES", 0));
+ }
+ menu_finalize(&rootmenu);
+ for_all_symbols(i, sym) {
+ if (sym_check_deps(sym))
+ zconfnerrs++;
+ }
+ if (zconfnerrs)
+ exit(1);
+ sym_set_change_count(1);
+}
+
+const char *zconf_tokenname(int token)
+{
+ switch (token) {
+ case T_MENU: return "menu";
+ case T_ENDMENU: return "endmenu";
+ case T_CHOICE: return "choice";
+ case T_ENDCHOICE: return "endchoice";
+ case T_IF: return "if";
+ case T_ENDIF: return "endif";
+ case T_DEPENDS: return "depends";
+ }
+ return "<token>";
+}
+
+static bool zconf_endtoken(struct kconf_id *id, int starttoken, int endtoken)
+{
+ if (id->token != endtoken) {
+ zconf_error("unexpected '%s' within %s block",
+ kconf_id_strings + id->name, zconf_tokenname(starttoken));
+ zconfnerrs++;
+ return false;
+ }
+ if (current_menu->file != current_file) {
+ zconf_error("'%s' in different file than '%s'",
+ kconf_id_strings + id->name, zconf_tokenname(starttoken));
+ fprintf(stderr, "%s:%d: location of the '%s'\n",
+ current_menu->file->name, current_menu->lineno,
+ zconf_tokenname(starttoken));
+ zconfnerrs++;
+ return false;
+ }
+ return true;
+}
+
+static void zconfprint(const char *err, ...)
+{
+ va_list ap;
+
+ fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno());
+ va_start(ap, err);
+ vfprintf(stderr, err, ap);
+ va_end(ap);
+ fprintf(stderr, "\n");
+}
+
+static void zconf_error(const char *err, ...)
+{
+ va_list ap;
+
+ zconfnerrs++;
+ fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno());
+ va_start(ap, err);
+ vfprintf(stderr, err, ap);
+ va_end(ap);
+ fprintf(stderr, "\n");
+}
+
+static void zconferror(const char *err)
+{
+#if YYDEBUG
+ fprintf(stderr, "%s:%d: %s\n", zconf_curname(), zconf_lineno() + 1, err);
+#endif
+}
+
+void print_quoted_string(FILE *out, const char *str)
+{
+ const char *p;
+ int len;
+
+ putc('"', out);
+ while ((p = strchr(str, '"'))) {
+ len = p - str;
+ if (len)
+ fprintf(out, "%.*s", len, str);
+ fputs("\\\"", out);
+ str = p + 1;
+ }
+ fputs(str, out);
+ putc('"', out);
+}
+
+void print_symbol(FILE *out, struct menu *menu)
+{
+ struct symbol *sym = menu->sym;
+ struct property *prop;
+
+ if (sym_is_choice(sym))
+ fprintf(out, "choice\n");
+ else
+ fprintf(out, "config %s\n", sym->name);
+ switch (sym->type) {
+ case S_BOOLEAN:
+ fputs(" boolean\n", out);
+ break;
+ case S_TRISTATE:
+ fputs(" tristate\n", out);
+ break;
+ case S_STRING:
+ fputs(" string\n", out);
+ break;
+ case S_INT:
+ fputs(" integer\n", out);
+ break;
+ case S_HEX:
+ fputs(" hex\n", out);
+ break;
+ default:
+ fputs(" ???\n", out);
+ break;
+ }
+ for (prop = sym->prop; prop; prop = prop->next) {
+ if (prop->menu != menu)
+ continue;
+ switch (prop->type) {
+ case P_PROMPT:
+ fputs(" prompt ", out);
+ print_quoted_string(out, prop->text);
+ if (!expr_is_yes(prop->visible.expr)) {
+ fputs(" if ", out);
+ expr_fprint(prop->visible.expr, out);
+ }
+ fputc('\n', out);
+ break;
+ case P_DEFAULT:
+ fputs( " default ", out);
+ expr_fprint(prop->expr, out);
+ if (!expr_is_yes(prop->visible.expr)) {
+ fputs(" if ", out);
+ expr_fprint(prop->visible.expr, out);
+ }
+ fputc('\n', out);
+ break;
+ case P_CHOICE:
+ fputs(" #choice value\n", out);
+ break;
+ default:
+ fprintf(out, " unknown prop %d!\n", prop->type);
+ break;
+ }
+ }
+ if (menu->help) {
+ int len = strlen(menu->help);
+ while (menu->help[--len] == '\n')
+ menu->help[len] = 0;
+ fprintf(out, " help\n%s\n", menu->help);
+ }
+ fputc('\n', out);
+}
+
+void zconfdump(FILE *out)
+{
+ struct property *prop;
+ struct symbol *sym;
+ struct menu *menu;
+
+ menu = rootmenu.list;
+ while (menu) {
+ if ((sym = menu->sym))
+ print_symbol(out, menu);
+ else if ((prop = menu->prompt)) {
+ switch (prop->type) {
+ case P_COMMENT:
+ fputs("\ncomment ", out);
+ print_quoted_string(out, prop->text);
+ fputs("\n", out);
+ break;
+ case P_MENU:
+ fputs("\nmenu ", out);
+ print_quoted_string(out, prop->text);
+ fputs("\n", out);
+ break;
+ default:
+ ;
+ }
+ if (!expr_is_yes(prop->visible.expr)) {
+ fputs(" depends ", out);
+ expr_fprint(prop->visible.expr, out);
+ fputc('\n', out);
+ }
+ fputs("\n", out);
+ }
+
+ if (menu->list)
+ menu = menu->list;
+ else if (menu->next)
+ menu = menu->next;
+ else while ((menu = menu->parent)) {
+ if (menu->prompt && menu->prompt->type == P_MENU)
+ fputs("\nendmenu\n", out);
+ if (menu->next) {
+ menu = menu->next;
+ break;
+ }
+ }
+ }
+}
+
+#include "lex.zconf.c"
+#include "util.c"
+#include "confdata.c"
+#include "expr.c"
+#include "symbol.c"
+#include "menu.c"
diff --git a/util/sconfig/LICENSE b/util/sconfig/LICENSE
new file mode 100644
index 0000000..64f38b8
--- /dev/null
+++ b/util/sconfig/LICENSE
@@ -0,0 +1,18 @@
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
diff --git a/util/sconfig/Makefile b/util/sconfig/Makefile
new file mode 100644
index 0000000..3328380
--- /dev/null
+++ b/util/sconfig/Makefile
@@ -0,0 +1,31 @@
+ALL: $(shell echo *.g | sed s/\\.g/\\.py/g )
+
+%.py: %.g yapps2.py yappsrt.py Makefile
+ python yapps2.py $<
+
+DOC: yapps2.ps yapps2.pdf manual/index.html
+
+yapps2.ps: yapps2.dvi
+ dvips -q yapps2.dvi -o yapps2.ps
+
+yapps2.pdf: yapps2.ps
+ ps2pdf yapps2.ps
+
+yapps2.dvi: yapps2.tex
+ latex yapps2.tex
+
+manual/index.html: yapps2.aux yapps2.tex
+ rm manual/yapps2.css
+ latex2html -dir 'manual' -mkdir -lcase_tags -font_size 12pt -split 4 -toc_depth 4 -html_version 4.0,unicode,table -t 'Yapps 2.0 Manual' -address 'Amit J Patel, amitp@cs.stanford.edu' -info 0 -show_section_numbers -up_title 'Yapps Page' -up_url 'http://theory.stanford.edu/~amitp/yapps/' -strict -image_type png yapps2.tex
+ echo '@import url("http://www-cs-students.stanford.edu/~amitp/amitp.css");' > manual/yapps2-new.css
+ echo 'hr { display:none; }' >> manual/yapps2-new.css
+ echo 'h1 br, h2 br { display:none; }' >>manual/yapps2-new.css
+ cat manual/yapps2.css >> manual/yapps2-new.css
+ rm manual/yapps2.css
+ mv manual/yapps2-new.css manual/yapps2.css
+
+DISTRIB:
+ cd ..; zip -u yapps2.zip yapps2/{LICENSE,yapps2.py,yappsrt.py,parsedesc.g,examples/*.g,NOTES,yapps2.tex,Makefile,manual/*.html,manual/*.css,manual/*.png}
+
+clean:
+ rm -f config.py yappsrt.pyc parsedesc.py
diff --git a/util/sconfig/NOTES b/util/sconfig/NOTES
new file mode 100644
index 0000000..325e76a
--- /dev/null
+++ b/util/sconfig/NOTES
@@ -0,0 +1,46 @@
+April 14, 2002:
+
+I haven't worked on Yapps for a while, mainly because I spent all my energy
+on trying to graduate. Now that I've finished school, I have several projects
+I want to start working on again, including Yapps.
+
+Notes for myself:
+
+Add a debugging mode that helps you understand how the grammar
+ is constructed and how things are being parsed
+Look into an English output mode that would use natural language
+ to describe a grammar
+Optimize unused variables
+Add a convenience to automatically gather up the values returned
+ from subpatterns, put them into a list, and return them
+Improve the documentation
+Write some larger examples
+Get rid of old-style regex support
+Use SRE's lex support to speed up lexing (this may be hard given that
+ yapps allows for context-sensitive lexers)
+Look over Dan Connoly's experience with Yapps (bugs, frustrations, etc.)
+ and see what improvements could be made
+Add something to pretty-print the grammar (without the actions)
+Maybe conditionals? Follow this rule only if <condition> holds.
+ But this would be useful mainly when multiple rules match, and we
+ want the first matching rule. The conditional would mean we skip to
+ the next rule. Maybe this is part of the attribute grammar system,
+ where rule X<0> can be specified separately from X<N>.
+Convenience functions that could build return values for all rules
+ without specifying the code for each rule individually
+Patterns (abstractions over rules) -- for example, comma separated values
+ have a certain rule pattern that gets replicated all over the place
+"Gather" mode that simply outputs the return values for certain nodes.
+ For example, if you just want all expressions, you could ask yapps
+ to gather the results of the 'expr' rule into a list. This would
+ ignore all the higher level structure.
+Look at everyone's Yapps grammars, and come up with larger examples
+ http://www.w3.org/2000/10/swap/SemEnglish.g
+ http://www.w3.org/2000/10/swap/kifExpr.g
+ http://www.w3.org/2000/10/swap/rdfn3.g
+It would be nice if you could feed text into Yapps (push model) instead
+ of Yapps reading text out of a string (pull model). However, I think
+ that would make the resulting parser code mostly unreadable
+ (like yacc, etc.). Coroutines/stacklesspython may be the answer.
+
+
diff --git a/util/sconfig/config.g b/util/sconfig/config.g
new file mode 100644
index 0000000..db3c516
--- /dev/null
+++ b/util/sconfig/config.g
@@ -0,0 +1,1029 @@
+# -*- python -*-
+import sys
+import os
+import re
+import string
+import types
+
+import traceback
+
+warnings = 0
+errors = 0
+
+treetop = ''
+full_mainboard_path = ''
+mainboard_path = ''
+romimages = {}
+curimage = 0
+
+# -----------------------------------------------------------------------------
+# Utility Classes
+# -----------------------------------------------------------------------------
+
+class stack:
+ """Used to keep track of the current part or dir"""
+ class __stack_iter:
+ def __init__ (self, stack):
+ self.index = 0
+ self.len = len(stack)
+ self.stack = stack
+
+ def __iter__ (self):
+ return self
+
+ def next (self):
+ if (self.index < self.len):
+ s = self.stack[self.index]
+ self.index = self.index + 1
+ return s
+ raise StopIteration
+
+ def __init__ (self):
+ self.stack = []
+
+ def __len__ (self):
+ return len(self.stack)
+
+ def __getitem__ (self, i):
+ return self.stack[i]
+
+ def __iter__ (self):
+ return self.__stack_iter(self.stack)
+
+ def push(self, part):
+ self.stack.append(part)
+
+ def pop(self):
+ try:
+ return self.stack.pop()
+ except IndexError:
+ return 0
+
+ def tos(self):
+ try:
+ return self.stack[-1]
+ except IndexError:
+ return 0
+
+ def empty(self):
+ return (len(self.stack) == 0)
+partstack = stack()
+
+class debug_info:
+ none = 0
+ gencode = 1
+ dumptree = 2
+ object = 3
+ dict = 4
+ statement = 5
+ dump = 6
+ gengraph = 7
+
+ def __init__(self, *level):
+ self.__level = level
+
+ def setdebug(self, *level):
+ self.__level = level
+
+ def level(self, level):
+ return level in self.__level
+
+ def info(self, level, str):
+ if level in self.__level:
+ print str
+
+global debug
+debug = debug_info(debug_info.none)
+#debug = debug_info(debug_info.dumptree)
+#debug = debug_info(debug_info.object)
+#debug = debug_info(debug_info.gencode)
+
+# -----------------------------------------------------------------------------
+# Error Handling
+# -----------------------------------------------------------------------------
+
+def error(string):
+ """Print error message"""
+ global errors, loc
+ errors = errors + 1
+ print "===> ERROR: %s" % string
+
+def fatal(string):
+ """Print error message and exit"""
+ error(string)
+ exitiferrors()
+
+def warning(string):
+ """Print warning message"""
+ global warnings, loc
+ warnings = warnings + 1
+ print "===> WARNING: %s" % string
+
+def exitiferrors():
+ """Exit parser if an error has been encountered"""
+ if (errors != 0):
+ sys.exit(1)
+
+def safe_open(file, mode):
+ try:
+ return open(file, mode)
+ except IOError:
+ fatal("Could not open file \"%s\"" % file)
+
+# -----------------------------------------------------------------------------
+# Main classes
+# -----------------------------------------------------------------------------
+
+class romimage:
+ """A rom image is the ultimate goal of coreboot"""
+ def __init__ (self, name):
+ # name of this rom image
+ self.name = name
+
+ # instance counter for parts
+ self.partinstance = 0
+
+ # chip config files included by the 'config' directive
+ self.configincludes = {}
+
+ # root of part tree
+ self.root = 0
+
+ # Last device built
+ self.last_device = 0
+
+ def getname(self):
+ return self.name
+
+ def addconfiginclude(self, part, path):
+ setdict(self.configincludes, part, path)
+
+ def getconfigincludes(self):
+ return self.configincludes
+
+ def getincludefilename(self):
+ if (self.useinitincludes):
+ return "crt0.S"
+ else:
+ return "crt0_includes.h"
+
+ def newformat(self):
+ return self.useinitincludes
+
+ def numparts(self):
+ return self.partinstance
+
+ def newpartinstance(self):
+ i = self.partinstance
+ self.partinstance = self.partinstance + 1
+ return i
+
+ def setroot(self, part):
+ self.root = part
+
+ def getroot(self):
+ return self.root
+
+class partobj:
+ """A configuration part"""
+ def __init__ (self, image, dir, parent, part, type_name, instance_name, chip_or_device):
+ if (parent):
+ debug.info(debug.object, "partobj dir %s parent %s part %s" \
+ % (dir, parent.instance_name, part))
+ else:
+ debug.info(debug.object, "partobj dir %s part %s" \
+ % (dir, part))
+
+ # romimage that is configuring this part
+ self.image = image
+
+ # links for static device tree
+ self.children = 0
+ self.prev_sibling = 0
+ self.next_sibling = 0
+ self.prev_device = 0
+ self.next_device = 0
+ self.chip_or_device = chip_or_device
+
+ # initializers for static device tree
+ self.registercode = {}
+
+ # part name
+ self.part = part
+
+ # type name of this part
+ self.type_name = type_name
+
+ # directory containing part files
+ self.dir = dir
+
+ # instance number, used to distinguish anonymous
+ # instances of this part
+ self.instance = image.newpartinstance()
+ debug.info(debug.object, "INSTANCE %d" % self.instance)
+
+ # Name of chip config file (0 if not needed)
+ self.chipconfig = 0
+
+ # Flag to indicate that we have generated type
+ # definitions for this part (only want to do it once)
+ self.done_types = 0
+
+ # Path to the device
+ self.path = ""
+
+ # Resources of the device
+ self.resoruce = ""
+ self.resources = 0
+
+ # Enabled state of the device
+ self.enabled = 1
+
+ # Flag if I am a duplicate device
+ self.dup = 0
+
+ # If there is a chip.h file, we will create an
+ # include for it.
+ if (dir):
+ chiph = os.path.join(dir, "chip.h")
+ if (os.path.exists(chiph)):
+ debug.info(debug.object, "%s has chip at %s" % (self, dir))
+ self.addconfig(chiph)
+
+ # If no instance name is supplied then generate
+ # a unique name
+ if (instance_name == 0):
+ self.instance_name = self.type_name + \
+ "_dev%d" % self.instance
+ self.chipinfo_name = "%s_info_%d" \
+ % (self.type_name, self.instance)
+ else:
+ self.instance_name = instance_name
+ self.chipinfo_name = "%s_info_%d" % (self.instance_name, self.instance)
+
+ # Link this part into the device list
+ if (self.chip_or_device == 'device'):
+ if (image.last_device):
+ image.last_device.next_device = self
+ self.prev_device = image.last_device
+ image.last_device = self
+
+ # Link this part into the tree
+ if (parent and (part != 'arch')):
+ debug.info(debug.gencode, "add to parent")
+ self.parent = parent
+ # add current child as my sibling,
+ # me as the child.
+ if (parent.children):
+ debug.info(debug.gencode, "add %s (%d) as sibling" % (parent.children.dir, parent.children.instance))
+ youngest = parent.children
+ while(youngest.next_sibling):
+ youngest = youngest.next_sibling
+ youngest.next_sibling = self
+ self.prev_sibling = youngest
+ else:
+ parent.children = self
+ else:
+ self.parent = self
+
+ def info(self):
+ return "%s: %s" % (self.part, self.type)
+ def type(self):
+ return self.chip_or_device
+
+ def readable_name(self):
+ name = ""
+ name = "%s_%d" % (self.type_name, self.instance)
+ if (self.chip_or_device == 'chip'):
+ name = "%s %s %s" % (name, self.part, self.dir)
+ else:
+ name = "%s %s" % (name, self.path)
+ return name
+
+ def graph_name(self):
+ name = "{ {_dev%d|" % self.instance
+ if (self.part):
+ name = "%s%s" % (name, self.part)
+ else:
+ name = "%s%s" % (name, self.chip_or_device)
+ if (self.type_name):
+ name = "%s}|%s}" % (name, self.type_name)
+ else:
+ name = "%s}|%s}" % (name, self.parent.type_name)
+ return name
+
+ def dumpme(self, lvl):
+ """Dump information about this part for debugging"""
+ print "%d: %s" % (lvl, self.readable_name())
+ print "%d: part %s" % (lvl, self.part)
+ print "%d: instance %d" % (lvl, self.instance)
+ print "%d: chip_or_device %s" % (lvl, self.chip_or_device)
+ print "%d: dir %s" % (lvl,self.dir)
+ print "%d: type_name %s" % (lvl,self.type_name)
+ print "%d: parent: %s" % (lvl, self.parent.readable_name())
+ if (self.children):
+ print "%d: child %s" % (lvl, self.children.readable_name())
+ if (self.next_sibling):
+ print "%d: siblings %s" % (lvl, self.next_sibling.readable_name())
+ print "%d: registercode " % lvl
+ for f, v in self.registercode.items():
+ print "\t%s = %s" % (f, v)
+ print "%d: chipconfig %s" % (lvl, self.chipconfig)
+ print "\n"
+
+ def firstchilddevice(self):
+ """Find the first device in the children link."""
+ kid = self.children
+ while (kid):
+ if (kid.chip_or_device == 'device'):
+ return kid
+ else:
+ kid = kid.children
+ return 0
+
+ def firstparentdevice(self):
+ """Find the first device in the parent link."""
+ parent = self.parent
+ while (parent and (parent.parent != parent) and (parent.chip_or_device != 'device')):
+ parent = parent.parent
+ if ((parent.parent != parent) and (parent.chip_or_device != 'device')):
+ parent = 0
+ while(parent and (parent.dup == 1)):
+ parent = parent.prev_sibling
+ if (not parent):
+ fatal("Device %s has no device parent; this is a config file error" % self.readable_name())
+ return parent
+
+ def firstparentdevicelink(self):
+ """Find the first device in the parent link and record which link it is."""
+ link = 0
+ parent = self.parent
+ while (parent and (parent.parent != parent) and (parent.chip_or_device != 'device')):
+ parent = parent.parent
+ if ((parent.parent != parent) and (parent.chip_or_device != 'device')):
+ parent = 0
+ while(parent and (parent.dup == 1)):
+ parent = parent.prev_sibling
+ link = link + 1
+ if (not parent):
+ fatal("Device %s has no device parent; this is a config file error" % self.readable_name())
+ return link
+
+
+ def firstparentchip(self):
+ """Find the first chip in the parent link."""
+ parent = self.parent
+ while (parent):
+ if ((parent.parent == parent) or (parent.chip_or_device == 'chip')):
+ return parent
+ else:
+ parent = parent.parent
+ fatal("Device %s has no chip parent; this is a config file error" % self.readable_name())
+
+ def firstsiblingdevice(self):
+ """Find the first device in the sibling link."""
+ sibling = self.next_sibling
+ while(sibling and (sibling.path == self.path)):
+ sibling = sibling.next_sibling
+ if ((not sibling) and (self.parent.chip_or_device == 'chip')):
+ sibling = self.parent.next_sibling
+ while(sibling):
+ if (sibling.chip_or_device == 'device'):
+ return sibling
+ else:
+ sibling = sibling.children
+ return 0
+
+ def gencode(self, file, pass_num):
+ """Generate static initalizer code for this part. Two passes
+ are used - the first generates type information, and the second
+ generates instance information"""
+ if (pass_num == 0):
+ if (self.chip_or_device == 'chip'):
+ return;
+ else:
+ if (self.instance):
+ file.write("struct device %s;\n" \
+ % self.instance_name)
+ else:
+ file.write("struct device dev_root;\n")
+ return
+ # This is pass the second, which is pass number 1
+ # this is really just a case statement ...
+
+ if (self.chip_or_device == 'chip'):
+ if (self.chipconfig):
+ debug.info(debug.gencode, "gencode: chipconfig(%d)" % \
+ self.instance)
+ file.write("struct %s_config %s" % (self.type_name ,\
+ self.chipinfo_name))
+ if (self.registercode):
+ file.write("\t= {\n")
+ for f, v in self.registercode.items():
+ file.write( "\t.%s = %s,\n" % (f, v))
+ file.write("};\n")
+ else:
+ file.write(";")
+ file.write("\n")
+
+ if (self.instance == 0):
+ self.instance_name = "dev_root"
+ file.write("struct device **last_dev_p = &%s.next;\n" % (self.image.last_device.instance_name))
+ file.write("struct device dev_root = {\n")
+ file.write("\t.ops = &default_dev_ops_root,\n")
+ file.write("\t.bus = &dev_root.link[0],\n")
+ file.write("\t.path = { .type = DEVICE_PATH_ROOT },\n")
+ file.write("\t.enabled = 1,\n\t.links = 1,\n")
+ file.write("\t.on_mainboard = 1,\n")
+ file.write("\t.link = {\n\t\t[0] = {\n")
+ file.write("\t\t\t.dev=&dev_root,\n\t\t\t.link = 0,\n")
+ file.write("\t\t\t.children = &%s,\n" % self.firstchilddevice().instance_name)
+ file.write("\t\t},\n")
+ file.write("\t},\n")
+ if (self.chipconfig):
+ file.write("\t.chip_ops = &%s_ops,\n" % self.type_name)
+ file.write("\t.chip_info = &%s_info_%s,\n" % (self.type_name, self.instance))
+ file.write("\t.next = &%s,\n" % self.firstchilddevice().instance_name)
+ file.write("};\n")
+ return
+
+ # Don't print duplicate devices, just print their children
+ if (self.dup):
+ return
+
+ file.write("struct device %s = {\n" % self.instance_name)
+ file.write("\t.ops = 0,\n")
+ file.write("\t.bus = &%s.link[%d],\n" % \
+ (self.firstparentdevice().instance_name, \
+ self.firstparentdevicelink()))
+ file.write("\t.path = {%s},\n" % self.path)
+ file.write("\t.enabled = %d,\n" % self.enabled)
+ file.write("\t.on_mainboard = 1,\n")
+ if (self.resources):
+ file.write("\t.resources = %d,\n" % self.resources)
+ file.write("\t.resource = {%s\n\t },\n" % self.resource)
+ file.write("\t.link = {\n");
+ links = 0
+ bus = self
+ while(bus and (bus.path == self.path)):
+ child = bus.firstchilddevice()
+ if (child or (bus != self) or (bus.next_sibling and (bus.next_sibling.path == self.path))):
+ file.write("\t\t[%d] = {\n" % links)
+ file.write("\t\t\t.link = %d,\n" % links)
+ file.write("\t\t\t.dev = &%s,\n" % self.instance_name)
+ if (child):
+ file.write("\t\t\t.children = &%s,\n" %child.instance_name)
+ file.write("\t\t},\n")
+ links = links + 1
+ if (1):
+ bus = bus.next_sibling
+ else:
+ bus = 0
+ file.write("\t},\n")
+ file.write("\t.links = %d,\n" % (links))
+ sibling = self.firstsiblingdevice();
+ if (sibling):
+ file.write("\t.sibling = &%s,\n" % sibling.instance_name)
+ chip = self.firstparentchip()
+ if (chip and chip.chipconfig):
+ file.write("\t.chip_ops = &%s_ops,\n" % chip.type_name)
+ file.write("\t.chip_info = &%s_info_%s,\n" % (chip.type_name, chip.instance))
+ if (self.next_device):
+ file.write("\t.next=&%s\n" % self.next_device.instance_name)
+ file.write("};\n")
+ return
+
+ def addconfig(self, path):
+ """Add chip config file to this part"""
+ self.chipconfig = os.path.join(self.dir, path)
+ self.image.addconfiginclude(self.type_name, self.chipconfig)
+
+ def addregister(self, field, value):
+ """Register static initialization information"""
+ if (self.chip_or_device != 'chip'):
+ fatal("Only chips can have register values")
+ field = dequote(field)
+ value = dequote(value)
+ setdict(self.registercode, field, value)
+
+ def set_enabled(self, enabled):
+ self.enabled = enabled
+
+ def start_resources(self):
+ self.resource = ""
+ self.resources = 0
+
+ def end_resources(self):
+ self.resource = "%s" % (self.resource)
+
+ def add_resource(self, type, index, value):
+ """ Add a resource to a device """
+ self.resource = "%s\n\t\t{ .flags=%s, .index=0x%x, .base=0x%x}," % (self.resource, type, index, value)
+ self.resources = self.resources + 1
+
+ def set_path(self, path):
+ self.path = path
+ if (self.prev_sibling and (self.prev_sibling.path == self.path)):
+ self.dup = 1
+ if (self.prev_device):
+ self.prev_device.next_device = self.next_device
+ if (self.next_device):
+ self.next_device.prev_device = self.prev_device
+ if (self.image.last_device == self):
+ self.image.last_device = self.prev_device
+ self.prev_device = 0
+ self.next_device = 0
+
+ def addpcipath(self, slot, function):
+ """ Add a relative pci style path from our parent to this device """
+ if ((slot < 0) or (slot > 0x1f)):
+ fatal("Invalid device id")
+ if ((function < 0) or (function > 7)):
+ fatal("Invalid pci function %s" % function )
+ self.set_path(".type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x%x,%d)}}" % (slot, function))
+
+ def addpnppath(self, port, device):
+ """ Add a relative path to a pnp device hanging off our parent """
+ if ((port < 0) or (port > 65536)):
+ fatal("Invalid port")
+ if ((device < 0) or (device > 0xffff)):
+ fatal("Invalid device")
+ self.set_path(".type=DEVICE_PATH_PNP,{.pnp={ .port = 0x%x, .device = 0x%x }}" % (port, device))
+
+ def addi2cpath(self, device):
+ """ Add a relative path to a i2c device hanging off our parent """
+ if ((device < 0) or (device > 0x7f)):
+ fatal("Invalid device")
+ self.set_path(".type=DEVICE_PATH_I2C,{.i2c={ .device = 0x%x }}" % (device))
+
+ def addapicpath(self, apic_id):
+ """ Add a relative path to a cpu device hanging off our parent """
+ if ((apic_id < 0) or (apic_id > 255)):
+ fatal("Invalid device")
+ self.set_path(".type=DEVICE_PATH_APIC,{.apic={ .apic_id = 0x%x }}" % (apic_id))
+
+ def addpci_domainpath(self, pci_domain):
+ """ Add a pci_domain number to a chip """
+ if ((pci_domain < 0) or (pci_domain > 0xffff)):
+ fatal("Invalid pci_domain: 0x%x is out of the range 0 to 0xffff" % pci_domain)
+ self.set_path(".type=DEVICE_PATH_PCI_DOMAIN,{.pci_domain={ .domain = 0x%x }}" % (pci_domain))
+
+ def addapic_clusterpath(self, cluster):
+ """ Add an apic cluster to a chip """
+ if ((cluster < 0) or (cluster > 15)):
+ fatal("Invalid apic cluster: %d is out of the range 0 to ff" % cluster)
+ self.set_path(".type=DEVICE_PATH_APIC_CLUSTER,{.apic_cluster={ .cluster = 0x%x }}" % (cluster))
+
+ def addcpupath(self, cpu_id):
+ """ Add a relative path to a cpu device hanging off our parent """
+ if ((cpu_id < 0) or (cpu_id > 255)):
+ fatal("Invalid device")
+ self.set_path(".type=DEVICE_PATH_CPU,{.cpu={ .id = 0x%x }}" % (cpu_id))
+
+
+ def addcpu_buspath(self, id):
+ """ Add a cpu_bus to a chip """
+ if ((id < 0) or (id > 255)):
+ fatal("Invalid device")
+ self.set_path(".type=DEVICE_PATH_CPU_BUS,{.cpu_bus={ .id = 0x%x }}" % (id))
+
+
+# -----------------------------------------------------------------------------
+# statements
+# -----------------------------------------------------------------------------
+
+def getdict(dict, name):
+ if name not in dict.keys():
+ debug.info(debug.dict, "Undefined: %s" % name)
+ return 0
+ v = dict.get(name, 0)
+ debug.info(debug.dict, "getdict %s returning %s" % (name, v))
+ return v
+
+def setdict(dict, name, value):
+ debug.info(debug.dict, "setdict sets %s to %s" % (name, value))
+ if name in dict.keys():
+ print "Duplicate in dict: %s" % name
+ dict[name] = value
+
+
+def addconfig(path):
+ global partstack
+ curpart = partstack.tos()
+ curpart.addconfig(path)
+
+def addregister(field, value):
+ global partstack
+ curpart = partstack.tos()
+ curpart.addregister(field, value)
+
+def devicepart(type):
+ global curimage, partstack
+ newpart = partobj(curimage, 0, partstack.tos(), type, \
+ '', 0, 'device')
+ #print "Configuring PART %s" % (type)
+ partstack.push(newpart)
+ #print " new PART tos is now %s\n" %partstack.tos().info()
+ # just push TOS, so that we can pop later.
+
+def part(type, path, file, name):
+ global curimage, partstack
+ partdir = os.path.join(type, path)
+ srcdir = os.path.join(treetop, 'src')
+ fulldir = os.path.join(srcdir, partdir)
+ type_name = flatten_name(partdir)
+ #print "PART(%s, %s, %s, %s)\n" % (type, path, file, name)
+ newpart = partobj(curimage, fulldir, partstack.tos(), type, \
+ type_name, name, 'chip')
+ #print "Configuring PART %s, path %s" % (type, path)
+ partstack.push(newpart)
+
+def partpop():
+ global partstack
+ curpart = partstack.tos()
+ if (curpart == 0):
+ fatal("Trying to pop non-existent part")
+ #print "End PART %s" % curpart.part
+ oldpart = partstack.pop()
+ #print "partstack.pop, TOS is now %s\n" % oldpart.info()
+
+#=============================================================================
+# MISC FUNCTIONS
+#=============================================================================
+def dequote(str):
+ a = re.sub("^\"", "", str)
+ a = re.sub("\"$", "", a)
+ # highly un-intuitive, need four \!
+ a = re.sub("\\\\\"", "\"", a)
+ return a
+
+def flatten_name(str):
+ a = re.sub("[/-]", "_", str)
+ return a
+%%
+parser Config:
+ ignore: r'\s+'
+ ignore: "#.*?\r?\n"
+
+ # less general tokens should come first, otherwise they get matched
+ # by the re's
+ token COMMENT: 'comment'
+ token CPU: 'cpu'
+ token CPU_BUS: 'cpu_bus'
+ token CHIP: 'chip'
+ token DEVICE: 'device'
+ token DEVICE_ID: 'device_id'
+ token DRQ: 'drq'
+ token END: 'end'
+ token EOF: '$'
+ token EQ: '='
+ token FORMAT: 'format'
+ token IO: 'io'
+ token IRQ: 'irq'
+ token MEM: 'mem'
+ token NEVER: 'never'
+ token NONE: 'none'
+ token PMC: 'pmc'
+ token PRINT: 'print'
+ token REGISTER: 'register'
+ token VENDOR_ID: 'vendor_id'
+ token WRITE: 'write'
+ token NUM: '[0-9]+'
+ token HEX_NUM: '[0-9a-fA-F]+'
+ token HEX_PREFIX: '0x'
+ # Why is path separate? Because paths to resources have to at least
+ # have a slash, we thinks
+ token PATH: r'[-a-zA-Z0-9_.][-a-zA-Z0-9/_.]+[-a-zA-Z0-9_.]+'
+ # Dir's on the other hand are abitrary
+ # this may all be stupid.
+ token RULE: r'[-a-zA-Z0-9_$()./]+[-a-zA-Z0-9_ $()./]+[-a-zA-Z0-9_$()./]+'
+ token ID: r'[a-zA-Z_.]+[a-zA-Z0-9_.]*'
+ token STR: r'"([^\\"]+|\\.)*"'
+ token RAWTEXT: r'.*'
+ token ON: 'on'
+ token OFF: 'off'
+ token PCI: 'pci'
+ token PNP: 'pnp'
+ token I2C: 'i2c'
+ token APIC: 'apic'
+ token APIC_CLUSTER: 'apic_cluster'
+ token CPU: 'cpu'
+ token CPU_BUS: 'cpu_bus'
+ token PCI_DOMAIN: 'pci_domain'
+
+
+ rule expr: logical {{ l = logical }}
+ ( "&&" logical {{ l = l and logical }}
+ | "[|][|]" logical {{ l = l or logical }}
+ )* {{ return l }}
+
+ rule logical: factor {{ n = factor }}
+ ( "[+]" factor {{ n = n+factor }}
+ | "-" factor {{ n = n-factor }}
+ )* {{ return n }}
+
+ rule factor: term {{ v = term }}
+ ( "[*]" term {{ v = v*term }}
+ | "/" term {{ v = v/term }}
+ | "<<" term {{ v = v << term }}
+ | ">=" term {{ v = (v < term)}}
+ )* {{ return v }}
+
+ # A term is a number, variable, or an expression surrounded by parentheses
+ rule term: NUM {{ return long(NUM, 10) }}
+ | HEX_PREFIX HEX_NUM {{ return long(HEX_NUM, 16) }}
+ | ID {{ return lookup(ID) }}
+ | unop {{ return unop }}
+ | "\\(" expr "\\)" {{ return expr }}
+
+ rule unop: "!" expr {{ return not(expr) }}
+
+ rule partend<<C>>: (stmt<<C>>)* END {{ if (C): partpop()}}
+
+ # This is needed because the legacy cpu command could not distinguish
+ # between cpu vendors. It should just be PATH, but getting this change
+ # into the source tree will be tricky...
+ # DO NOT USE ID AS IT MAY GO AWAY IN THE FUTURE
+ rule partid: ID {{ return ID }}
+ | PATH {{ return PATH }}
+
+ rule parttype: CHIP {{ return '' }}
+
+ rule partdef<<C>>: {{ name = 0 }}
+ parttype partid
+ [ STR {{ name = dequote(STR) }}
+ ] {{ if (C): part(parttype, partid, 'Config.lb', name) }}
+ partend<<C>>
+
+ rule field: STR {{ return STR }}
+
+ rule register<<C>>: REGISTER field '=' STR {{ if (C): addregister(field, STR) }}
+
+ rule enable<<C>>: {{ val = 1 }}
+ ( ON {{ val = 1 }}
+ | OFF {{ val = 0 }}
+ ) {{ if(C): partstack.tos().set_enabled(val) }}
+
+ rule resource<<C>>: {{ type = "" }}
+ ( IO {{ type = "IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO" }}
+ | MEM {{ type = "IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_MEM" }}
+ | IRQ {{ type = "IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IRQ" }}
+ | DRQ {{ type = "IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_DRQ" }}
+ )
+ term '=' {{ index = term }}
+ term {{ value = term }}
+ {{ if (C): partstack.tos().add_resource(type, index, value) }}
+
+
+ rule resources<<C>>: {{ if (C): partstack.tos().start_resources() }}
+ ( resource<<C>> )*
+ {{ if (C): partstack.tos().end_resources() }}
+
+
+ rule pci<<C>>: PCI {{ if (C): devicepart('pci') }}
+
+ HEX_NUM {{ slot = int(HEX_NUM,16) }}
+ '.' HEX_NUM {{ function = int(HEX_NUM, 16) }}
+ {{ if (C): partstack.tos().addpcipath(slot, function) }}
+ rule pci_domain<<C>>:
+ PCI_DOMAIN {{ if (C): devicepart('pci_domain') }}
+ HEX_NUM {{ pci_domain = int(HEX_NUM, 16) }}
+ {{ if (C): partstack.tos().addpci_domainpath(pci_domain) }}
+
+ rule pnp<<C>>: PNP {{ if (C): devicepart('pnp') }}
+ HEX_NUM {{ port = int(HEX_NUM,16) }}
+ '.' HEX_NUM {{ device = int(HEX_NUM, 16) }}
+ {{ if (C): partstack.tos().addpnppath(port, device) }}
+
+ rule i2c<<C>>: I2C {{ if (C): devicepart('i2c') }}
+ HEX_NUM {{ device = int(HEX_NUM, 16) }}
+ {{ if (C): partstack.tos().addi2cpath(device) }}
+
+ rule apic<<C>>: APIC {{ if (C): devicepart('apic') }}
+ HEX_NUM {{ apic_id = int(HEX_NUM, 16) }}
+ {{ if (C): partstack.tos().addapicpath(apic_id) }}
+
+ rule apic_cluster<<C>>: APIC_CLUSTER {{ if (C): devicepart('apic_cluster') }}
+ HEX_NUM {{ cluster = int(HEX_NUM, 16) }}
+ {{ if (C): partstack.tos().addapic_clusterpath(cluster) }}
+
+ rule cpu<<C>>: CPU {{ if (C): devicepart('cpu') }}
+ HEX_NUM {{ id = int(HEX_NUM, 16) }}
+ {{ if (C): partstack.tos().addcpupath(id) }}
+
+ rule cpu_bus<<C>>: CPU_BUS {{ if (C): devicepart('cpu_bus') }}
+ HEX_NUM {{ id = int(HEX_NUM, 16) }}
+ {{ if (C): partstack.tos().addcpu_buspath(id) }}
+
+ rule dev_path<<C>>:
+ pci<<C>> {{ return pci }}
+ | pci_domain<<C>> {{ return pci_domain }}
+ | pnp<<C>> {{ return pnp }}
+ | i2c<<C>> {{ return i2c }}
+ | apic<<C>> {{ return apic }}
+ | apic_cluster<<C>> {{ return apic_cluster }}
+ | cpu<<C>> {{ return cpu }}
+ | cpu_bus<<C>> {{ return cpu_bus }}
+
+ rule prtval: expr {{ return str(expr) }}
+ | STR {{ return STR }}
+
+ rule prtlist: prtval {{ el = "%(" + prtval }}
+ ( "," prtval {{ el = el + "," + prtval }}
+ )* {{ return el + ")" }}
+
+ rule prtstmt<<C>>: PRINT STR {{ val = STR }}
+ [ "," prtlist {{ val = val + prtlist }}
+ ] {{ if (C): print eval(val) }}
+
+ rule device<<C>>: DEVICE dev_path<<C>>
+ enable<<C>>
+ resources<<C>>
+ partend<<C>>
+
+ rule stmt<<C>>:
+ partdef<<C>> {{ return partdef }}
+ | prtstmt<<C>> {{ return prtstmt }}
+ | register<<C>> {{ return register }}
+ | device<<C>> {{ return device }}
+
+ rule value: STR {{ return dequote(STR) }}
+ | expr {{ return expr }}
+
+ rule devicetree: partdef<<1>>
+ EOF {{ return 1 }}
+
+ rule wrstr<<ID>>: STR {{ setwrite(ID, dequote(STR)) }}
+
+%%
+
+#=============================================================================
+# FILE OUTPUT
+#=============================================================================
+
+def dumptree(part, lvl):
+ debug.info(debug.dumptree, "DUMPTREE ME is")
+ print "%s " % part
+ part.dumpme(lvl)
+ # dump the siblings -- actually are there any? not sure
+ # siblings are:
+ debug.info(debug.dumptree, "DUMPTREE SIBLINGS are")
+ kid = part.next_sibling
+ while (kid):
+ kid.dumpme(lvl)
+ kid = kid.next_sibling
+ # dump the kids
+ debug.info(debug.dumptree, "DUMPTREE KIDS are")
+ #for kid in part.children:
+ if (part.children):
+ dumptree(part.children, lvl+1)
+ kid = part.next_sibling
+ while (kid):
+ if (kid.children):
+ dumptree(kid.children, lvl + 1)
+ kid = kid.next_sibling
+ debug.info(debug.dumptree, "DONE DUMPTREE")
+
+def writecode(image):
+ filename = os.path.join(img_dir, "static.c")
+ print "Creating", filename
+ file = safe_open(filename, 'w+')
+ file.write("#include <device/device.h>\n")
+ file.write("#include <device/pci.h>\n")
+ for path in image.getconfigincludes().values():
+ file.write("#include \"%s\"\n" % path)
+ file.write("\n/* pass 0 */\n")
+ gencode(image.getroot(), file, 0)
+ file.write("\n/* pass 1 */\n")
+ gencode(image.getroot(), file, 1)
+ file.close()
+
+def gencode(part, file, pass_num):
+ debug.info(debug.gencode, "GENCODE ME is")
+ part.gencode(file, pass_num)
+ # dump the siblings -- actually are there any? not sure
+ debug.info(debug.gencode, "GENCODE SIBLINGS are")
+ kid = part.next_sibling
+ while (kid):
+ kid.gencode(file, pass_num)
+ kid = kid.next_sibling
+ # now dump the children
+ debug.info(debug.gencode, "GENCODE KIDS are")
+ if (part.children):
+ gencode(part.children, file, pass_num)
+ kid = part.next_sibling
+ while (kid):
+ if (kid.children):
+ gencode(kid.children, file, pass_num)
+ kid = kid.next_sibling
+ debug.info(debug.gencode, "DONE GENCODE")
+
+def writegraph(image):
+ filename = os.path.join(img_dir, "static.dot")
+ print "Creating", filename
+ file = safe_open(filename, 'w+')
+ file.write("digraph devicetree {\n")
+ file.write(" rankdir=LR\n")
+ genranks(image.getroot(), file, 0)
+ gennodes(image.getroot(), file)
+ gengraph(image.getroot(), file)
+ file.write("}\n")
+ file.close()
+
+def genranks(part, file, level):
+ #file.write(" # Level %d\n" % level )
+ file.write(" { rank = same; \"dev_%s_%d\"" % (part.type_name,part.instance ))
+ sib = part.next_sibling
+ while (sib):
+ file.write("; \"dev_%s_%d\"" % (sib.type_name, sib.instance))
+ sib = sib.next_sibling
+ file.write("}\n" )
+ # now dump the children
+ if (part.children):
+ genranks(part.children, file, level + 1)
+
+ kid = part.next_sibling
+ while (kid):
+ if (kid.children):
+ genranks(kid.children, file, level + 1)
+ kid = kid.next_sibling
+
+
+def gennodes(part, file):
+ file.write(" dev_%s_%d[shape=record, label=\"%s\"];\n" % (part.type_name,part.instance,part.graph_name() ))
+ sib = part.next_sibling
+ while (sib):
+ file.write(" dev_%s_%d[shape=record, label=\"%s\"];\n" % (sib.type_name,sib.instance,sib.graph_name() ))
+ sib = sib.next_sibling
+ # now dump the children
+ if (part.children):
+ gennodes(part.children, file)
+
+ kid = part.next_sibling
+ while (kid):
+ if (kid.children):
+ gennodes(kid.children, file)
+ kid = kid.next_sibling
+
+
+def gengraph(part, file):
+ if (part.parent != part):
+ file.write(" dev_%s_%d -> dev_%s_%d;\n" % \
+ (part.parent.type_name, part.parent.instance, \
+ part.type_name, part.instance ))
+ sib = part.next_sibling
+ while (sib):
+ file.write(" dev_%s_%d -> dev_%s_%d;\n" % \
+ (sib.parent.type_name, sib.parent.instance, \
+ sib.type_name, sib.instance ))
+ sib = sib.next_sibling
+
+ kid = part.next_sibling
+ while (kid):
+ if (kid.children):
+ gengraph(kid.children, file)
+ kid = kid.next_sibling
+
+ if (part.children):
+ gengraph(part.children, file)
+
+#=============================================================================
+# MAIN PROGRAM
+#=============================================================================
+if __name__=='__main__':
+ from sys import argv
+ if (len(argv) < 4):
+ fatal("Args: <file> <path to coreboot> <output-dir>")
+
+ file = "devicetree.cb"
+ partdir = os.path.join("mainboard", sys.argv[1])
+ treetop = argv[2]
+ srcdir = os.path.join(treetop, 'src')
+ fulldir = os.path.join(srcdir, partdir)
+ type_name = flatten_name(partdir)
+ config_file = os.path.join(fulldir, file)
+
+ curimage = romimage("new")
+ image = curimage
+
+ newpart = partobj(curimage, fulldir, partstack.tos(), 'mainboard', \
+ 'mainboard', 0, 'chip')
+ #print "Configuring PART %s, path %s" % (type, path)
+ image.setroot(newpart);
+ partstack.push(newpart)
+
+ fp = safe_open(config_file, 'r')
+ if (not parse('devicetree', fp.read())):
+ fatal("Could not parse file")
+ print "PARSED THE TREE"
+ partstack.pop()
+
+ img_dir = argv[3]
+
+ #debug.info(debug.dumptree, "DEVICE TREE:")
+ #dumptree(curimage.getroot(), 0)
+
+ writecode(image)
+ writegraph(image)
+
+ sys.exit(0)
diff --git a/util/sconfig/parsedesc.g b/util/sconfig/parsedesc.g
new file mode 100644
index 0000000..7113c6d
--- /dev/null
+++ b/util/sconfig/parsedesc.g
@@ -0,0 +1,196 @@
+######################################################################
+# The remainder of this file is from parsedesc.{g,py}
+
+def append(lst, x):
+ "Imperative append"
+ lst.append(x)
+ return lst
+
+def add_inline_token(tokens, str):
+ tokens.insert( 0, (str, eval(str, {}, {})) )
+ return Terminal(str)
+
+def cleanup_choice(lst):
+ if len(lst) == 0: return Sequence([])
+ if len(lst) == 1: return lst[0]
+ return apply(Choice, tuple(lst))
+
+def cleanup_sequence(lst):
+ if len(lst) == 1: return lst[0]
+ return apply(Sequence, tuple(lst))
+
+def cleanup_rep(node, rep):
+ if rep == 'star': return Star(node)
+ elif rep == 'plus': return Plus(node)
+ else: return node
+
+def resolve_name(tokens, id, args):
+ if id in map(lambda x: x[0], tokens):
+ # It's a token
+ if args:
+ print 'Warning: ignoring parameters on TOKEN %s<<%s>>' % (id, args)
+ return Terminal(id)
+ else:
+ # It's a name, so assume it's a nonterminal
+ return NonTerminal(id, args)
+
+%%
+parser ParserDescription:
+ option: "context-insensitive-scanner"
+
+ ignore: "[ \t\r\n]+"
+ ignore: "#.*?\r?\n"
+ token END: "$"
+ token ATTR: "<<.+?>>"
+ token STMT: "{{.+?}}"
+ token ID: '[a-zA-Z_][a-zA-Z_0-9]*'
+ token STR: '[rR]?\'([^\\n\'\\\\]|\\\\.)*\'|[rR]?"([^\\n"\\\\]|\\\\.)*"'
+ token LP: '\\('
+ token RP: '\\)'
+ token LB: '\\['
+ token RB: '\\]'
+ token OR: '[|]'
+ token STAR: '[*]'
+ token PLUS: '[+]'
+ token QUEST: '[?]'
+ token COLON: ':'
+
+ rule Parser: "parser" ID ":"
+ Options
+ Tokens
+ Rules<<Tokens>>
+ END
+ {{ return Generator(ID,Options,Tokens,Rules) }}
+
+ rule Options: {{ opt = {} }}
+ ( "option" ":" Str {{ opt[Str] = 1 }} )*
+ {{ return opt }}
+
+ rule Tokens: {{ tok = [] }}
+ (
+ "token" ID ":" Str {{ tok.append( (ID,Str) ) }}
+ | "ignore" ":" Str {{ tok.append( ('#ignore',Str) ) }}
+ )*
+ {{ return tok }}
+
+ rule Rules<<tokens>>:
+ {{ rul = [] }}
+ (
+ "rule" ID OptParam ":" ClauseA<<tokens>>
+ {{ rul.append( (ID,OptParam,ClauseA) ) }}
+ )*
+ {{ return rul }}
+
+ rule ClauseA<<tokens>>:
+ ClauseB<<tokens>>
+ {{ v = [ClauseB] }}
+ ( OR ClauseB<<tokens>> {{ v.append(ClauseB) }} )*
+ {{ return cleanup_choice(v) }}
+
+ rule ClauseB<<tokens>>:
+ {{ v = [] }}
+ ( ClauseC<<tokens>> {{ v.append(ClauseC) }} )*
+ {{ return cleanup_sequence(v) }}
+
+ rule ClauseC<<tokens>>:
+ ClauseD<<tokens>>
+ ( PLUS {{ return Plus(ClauseD) }}
+ | STAR {{ return Star(ClauseD) }}
+ | {{ return ClauseD }} )
+
+ rule ClauseD<<tokens>>:
+ STR {{ t = (STR, eval(STR,{},{})) }}
+ {{ if t not in tokens: tokens.insert( 0, t ) }}
+ {{ return Terminal(STR) }}
+ | ID OptParam {{ return resolve_name(tokens, ID, OptParam) }}
+ | LP ClauseA<<tokens>> RP {{ return ClauseA }}
+ | LB ClauseA<<tokens>> RB {{ return Option(ClauseA) }}
+ | STMT {{ return Eval(STMT[2:-2]) }}
+
+ rule OptParam: [ ATTR {{ return ATTR[2:-2] }} ] {{ return '' }}
+ rule Str: STR {{ return eval(STR,{},{}) }}
+%%
+
+# This replaces the default main routine
+
+yapps_options = [
+ ('context-insensitive-scanner', 'context-insensitive-scanner',
+ 'Scan all tokens (see docs)')
+ ]
+
+def generate(inputfilename, outputfilename='', dump=0, **flags):
+ """Generate a grammar, given an input filename (X.g)
+ and an output filename (defaulting to X.py)."""
+
+ if not outputfilename:
+ if inputfilename[-2:]=='.g': outputfilename = inputfilename[:-2]+'.py'
+ else: raise "Invalid Filename", outputfilename
+
+ print 'Input Grammar:', inputfilename
+ print 'Output File:', outputfilename
+
+ DIVIDER = '\n%%\n' # This pattern separates the pre/post parsers
+ preparser, postparser = None, None # Code before and after the parser desc
+
+ # Read the entire file
+ s = open(inputfilename,'r').read()
+
+ # See if there's a separation between the pre-parser and parser
+ f = find(s, DIVIDER)
+ if f >= 0: preparser, s = s[:f]+'\n\n', s[f+len(DIVIDER):]
+
+ # See if there's a separation between the parser and post-parser
+ f = find(s, DIVIDER)
+ if f >= 0: s, postparser = s[:f], '\n\n'+s[f+len(DIVIDER):]
+
+ # Create the parser and scanner
+ p = ParserDescription(ParserDescriptionScanner(s))
+ if not p: return
+
+ # Now parse the file
+ t = wrap_error_reporter(p, 'Parser')
+ if not t: return # Error
+ if preparser is not None: t.preparser = preparser
+ if postparser is not None: t.postparser = postparser
+
+ # Check the options
+ for f in t.options.keys():
+ for opt,_,_ in yapps_options:
+ if f == opt: break
+ else:
+ print 'Warning: unrecognized option', f
+ # Add command line options to the set
+ for f in flags.keys(): t.options[f] = flags[f]
+
+ # Generate the output
+ if dump:
+ t.dump_information()
+ else:
+ t.output = open(outputfilename, 'w')
+ t.generate_output()
+
+if __name__=='__main__':
+ import sys, getopt
+ optlist, args = getopt.getopt(sys.argv[1:], 'f:', ['dump'])
+ if not args or len(args) > 2:
+ print 'Usage:'
+ print ' python', sys.argv[0], '[flags] input.g [output.py]'
+ print 'Flags:'
+ print (' --dump' + ' '*40)[:35] + 'Dump out grammar information'
+ for flag, _, doc in yapps_options:
+ print (' -f' + flag + ' '*40)[:35] + doc
+ else:
+ # Read in the options and create a list of flags
+ flags = {}
+ for opt in optlist:
+ for flag, name, _ in yapps_options:
+ if opt == ('-f', flag):
+ flags[name] = 1
+ break
+ else:
+ if opt == ('--dump', ''):
+ flags['dump'] = 1
+ else:
+ print 'Warning - unrecognized option: ', opt[0], opt[1]
+
+ apply(generate, tuple(args), flags)
diff --git a/util/sconfig/test.config b/util/sconfig/test.config
new file mode 100644
index 0000000..c492f20
--- /dev/null
+++ b/util/sconfig/test.config
@@ -0,0 +1,6 @@
+target x
+mainboard amd/solo
+# option X=1
+# makerule x y "z"
+ payload /dev/null
+end
diff --git a/util/sconfig/yapps2.py b/util/sconfig/yapps2.py
new file mode 100644
index 0000000..71bfa05
--- /dev/null
+++ b/util/sconfig/yapps2.py
@@ -0,0 +1,779 @@
+# Yapps 2.0 - yet another python parser system
+# Amit J Patel, January 1999
+# See http://theory.stanford.edu/~amitp/Yapps/ for documentation and updates
+
+# v2.0.1 changes (October 2001):
+# * The exceptions inherit the standard Exception class (thanks Rich Salz)
+# * The scanner can use either a different set of regular expressions
+# per instance, or allows the subclass to define class fields with
+# the patterns. This improves performance when many Scanner objects
+# are being created, because the regular expressions don't have to
+# be recompiled each time. (thanks Amaury Forgeot d'Arc)
+# v2.0.2 changes (April 2002)
+# * Fixed a bug in generating the 'else' clause when the comment was too
+# long. v2.0.1 was missing a newline. (thanks Steven Engelhardt)
+# v2.0.3 changes (August 2002)
+# * Fixed a bug with inline tokens using the r"" syntax.
+
+from string import *
+from yappsrt import *
+import re
+
+INDENT = " "*4
+
+class Generator:
+ def __init__(self, name, options, tokens, rules):
+ self.change_count = 0
+ self.name = name
+ self.options = options
+ self.preparser = ''
+ self.postparser = None
+
+ self.tokens = {} # Map from tokens to regexps
+ self.ignore = [] # List of token names to ignore in parsing
+ self.terminals = [] # List of token names (to maintain ordering)
+ for n,t in tokens:
+ if n == '#ignore':
+ n = t
+ self.ignore.append(n)
+ if n in self.tokens.keys() and self.tokens[n] != t:
+ print 'Warning: token', n, 'multiply defined.'
+ self.tokens[n] = t
+ self.terminals.append(n)
+
+ self.rules = {} # Map from rule names to parser nodes
+ self.params = {} # Map from rule names to parameters
+ self.goals = [] # List of rule names (to maintain ordering)
+ for n,p,r in rules:
+ self.params[n] = p
+ self.rules[n] = r
+ self.goals.append(n)
+
+ import sys
+ self.output = sys.stdout
+
+ def __getitem__(self, name):
+ # Get options
+ return self.options.get(name, 0)
+
+ def non_ignored_tokens(self):
+ return filter(lambda x, i=self.ignore: x not in i, self.terminals)
+
+ def changed(self):
+ self.change_count = 1+self.change_count
+
+ def subset(self, a, b):
+ "See if all elements of a are inside b"
+ for x in a:
+ if x not in b: return 0
+ return 1
+
+ def equal_set(self, a, b):
+ "See if a and b have the same elements"
+ if len(a) != len(b): return 0
+ if a == b: return 1
+ return self.subset(a, b) and self.subset(b, a)
+
+ def add_to(self, parent, additions):
+ "Modify parent to include all elements in additions"
+ for x in additions:
+ if x not in parent:
+ parent.append(x)
+ self.changed()
+
+ def equate(self, a, b):
+ self.add_to(a, b)
+ self.add_to(b, a)
+
+ def write(self, *args):
+ for a in args:
+ self.output.write(a)
+
+ def in_test(self, x, full, b):
+ if not b: return '0'
+ if len(b)==1: return '%s == %s' % (x, `b[0]`)
+ if full and len(b) > len(full)/2:
+ # Reverse the sense of the test.
+ not_b = filter(lambda x, b=b: x not in b, full)
+ return self.not_in_test(x, full, not_b)
+ return '%s in %s' % (x, `b`)
+
+ def not_in_test(self, x, full, b):
+ if not b: return '1'
+ if len(b)==1: return '%s != %s' % (x, `b[0]`)
+ return '%s not in %s' % (x, `b`)
+
+ def peek_call(self, a):
+ a_set = (`a`[1:-1])
+ if self.equal_set(a, self.non_ignored_tokens()): a_set = ''
+ if self['context-insensitive-scanner']: a_set = ''
+ return 'self._peek(%s)' % a_set
+
+ def peek_test(self, a, b):
+ if self.subset(a, b): return '1'
+ if self['context-insensitive-scanner']: a = self.non_ignored_tokens()
+ return self.in_test(self.peek_call(a), a, b)
+
+ def not_peek_test(self, a, b):
+ if self.subset(a, b): return '0'
+ return self.not_in_test(self.peek_call(a), a, b)
+
+ def calculate(self):
+ while 1:
+ for r in self.goals:
+ self.rules[r].setup(self, r)
+ if self.change_count == 0: break
+ self.change_count = 0
+
+ while 1:
+ for r in self.goals:
+ self.rules[r].update(self)
+ if self.change_count == 0: break
+ self.change_count = 0
+
+ def dump_information(self):
+ self.calculate()
+ for r in self.goals:
+ print ' _____' + '_'*len(r)
+ print ('___/Rule '+r+'\\' + '_'*80)[:79]
+ queue = [self.rules[r]]
+ while queue:
+ top = queue[0]
+ del queue[0]
+
+ print `top`
+ top.first.sort()
+ top.follow.sort()
+ eps = []
+ if top.accepts_epsilon: eps = ['(null)']
+ print ' FIRST:', join(top.first+eps, ', ')
+ print ' FOLLOW:', join(top.follow, ', ')
+ for x in top.get_children(): queue.append(x)
+
+ def generate_output(self):
+ self.calculate()
+ self.write(self.preparser)
+ self.write("from string import *\n")
+ self.write("import re\n")
+ self.write("from yappsrt import *\n")
+ self.write("\n")
+ self.write("class ", self.name, "Scanner(Scanner):\n")
+ self.write(" patterns = [\n")
+ for p in self.terminals:
+ self.write(" (%s, re.compile(%s)),\n" % (
+ `p`, `self.tokens[p]`))
+ self.write(" ]\n")
+ self.write(" def __init__(self, str):\n")
+ self.write(" Scanner.__init__(self,None,%s,str)\n" %
+ `self.ignore`)
+ self.write("\n")
+
+ self.write("class ", self.name, "(Parser):\n")
+ for r in self.goals:
+ self.write(INDENT, "def ", r, "(self")
+ if self.params[r]: self.write(", ", self.params[r])
+ self.write("):\n")
+ self.rules[r].output(self, INDENT+INDENT)
+ self.write("\n")
+
+ self.write("\n")
+ self.write("def parse(rule, text):\n")
+ self.write(" P = ", self.name, "(", self.name, "Scanner(text))\n")
+ self.write(" return wrap_error_reporter(P, rule)\n")
+ self.write("\n")
+ if self.postparser is not None:
+ self.write(self.postparser)
+ else:
+ self.write("if __name__=='__main__':\n")
+ self.write(INDENT, "from sys import argv, stdin\n")
+ self.write(INDENT, "if len(argv) >= 2:\n")
+ self.write(INDENT*2, "if len(argv) >= 3:\n")
+ self.write(INDENT*3, "f = open(argv[2],'r')\n")
+ self.write(INDENT*2, "else:\n")
+ self.write(INDENT*3, "f = stdin\n")
+ self.write(INDENT*2, "print parse(argv[1], f.read())\n")
+ self.write(INDENT, "else: print 'Args: <rule> [<filename>]'\n")
+
+######################################################################
+class Node:
+ def __init__(self):
+ self.first = []
+ self.follow = []
+ self.accepts_epsilon = 0
+ self.rule = '?'
+
+ def setup(self, gen, rule):
+ # Setup will change accepts_epsilon,
+ # sometimes from 0 to 1 but never 1 to 0.
+ # It will take a finite number of steps to set things up
+ self.rule = rule
+
+ def used(self, vars):
+ "Return two lists: one of vars used, and the other of vars assigned"
+ return vars, []
+
+ def get_children(self):
+ "Return a list of sub-nodes"
+ return []
+
+ def __repr__(self):
+ return str(self)
+
+ def update(self, gen):
+ if self.accepts_epsilon:
+ gen.add_to(self.first, self.follow)
+
+ def output(self, gen, indent):
+ "Write out code to _gen_ with _indent_:string indentation"
+ gen.write(indent, "assert 0 # Invalid parser node\n")
+
+class Terminal(Node):
+ def __init__(self, token):
+ Node.__init__(self)
+ self.token = token
+ self.accepts_epsilon = 0
+
+ def __str__(self):
+ return self.token
+
+ def update(self, gen):
+ Node.update(self, gen)
+ if self.first != [self.token]:
+ self.first = [self.token]
+ gen.changed()
+
+ def output(self, gen, indent):
+ gen.write(indent)
+ if re.match('[a-zA-Z_]+$', self.token):
+ gen.write(self.token, " = ")
+ gen.write("self._scan(%s)\n" % `self.token`)
+
+class Eval(Node):
+ def __init__(self, expr):
+ Node.__init__(self)
+ self.expr = expr
+
+ def setup(self, gen, rule):
+ Node.setup(self, gen, rule)
+ if not self.accepts_epsilon:
+ self.accepts_epsilon = 1
+ gen.changed()
+
+ def __str__(self):
+ return '{{ %s }}' % strip(self.expr)
+
+ def output(self, gen, indent):
+ gen.write(indent, strip(self.expr), '\n')
+
+class NonTerminal(Node):
+ def __init__(self, name, args):
+ Node.__init__(self)
+ self.name = name
+ self.args = args
+
+ def setup(self, gen, rule):
+ Node.setup(self, gen, rule)
+ try:
+ self.target = gen.rules[self.name]
+ if self.accepts_epsilon != self.target.accepts_epsilon:
+ self.accepts_epsilon = self.target.accepts_epsilon
+ gen.changed()
+ except KeyError: # Oops, it's nonexistent
+ print 'Error: no rule <%s>' % self.name
+ self.target = self
+
+ def __str__(self):
+ return '<%s>' % self.name
+
+ def update(self, gen):
+ Node.update(self, gen)
+ gen.equate(self.first, self.target.first)
+ gen.equate(self.follow, self.target.follow)
+
+ def output(self, gen, indent):
+ gen.write(indent)
+ gen.write(self.name, " = ")
+ gen.write("self.", self.name, "(", self.args, ")\n")
+
+class Sequence(Node):
+ def __init__(self, *children):
+ Node.__init__(self)
+ self.children = children
+
+ def setup(self, gen, rule):
+ Node.setup(self, gen, rule)
+ for c in self.children: c.setup(gen, rule)
+
+ if not self.accepts_epsilon:
+ # If it's not already accepting epsilon, it might now do so.
+ for c in self.children:
+ # any non-epsilon means all is non-epsilon
+ if not c.accepts_epsilon: break
+ else:
+ self.accepts_epsilon = 1
+ gen.changed()
+
+ def get_children(self):
+ return self.children
+
+ def __str__(self):
+ return '( %s )' % join(map(lambda x: str(x), self.children))
+
+ def update(self, gen):
+ Node.update(self, gen)
+ for g in self.children:
+ g.update(gen)
+
+ empty = 1
+ for g_i in range(len(self.children)):
+ g = self.children[g_i]
+
+ if empty: gen.add_to(self.first, g.first)
+ if not g.accepts_epsilon: empty = 0
+
+ if g_i == len(self.children)-1:
+ next = self.follow
+ else:
+ next = self.children[1+g_i].first
+ gen.add_to(g.follow, next)
+
+ if self.children:
+ gen.add_to(self.follow, self.children[-1].follow)
+
+ def output(self, gen, indent):
+ if self.children:
+ for c in self.children:
+ c.output(gen, indent)
+ else:
+ # Placeholder for empty sequences, just in case
+ gen.write(indent, 'pass\n')
+
+class Choice(Node):
+ def __init__(self, *children):
+ Node.__init__(self)
+ self.children = children
+
+ def setup(self, gen, rule):
+ Node.setup(self, gen, rule)
+ for c in self.children: c.setup(gen, rule)
+
+ if not self.accepts_epsilon:
+ for c in self.children:
+ if c.accepts_epsilon:
+ self.accepts_epsilon = 1
+ gen.changed()
+
+ def get_children(self):
+ return self.children
+
+ def __str__(self):
+ return '( %s )' % join(map(lambda x: str(x), self.children), ' | ')
+
+ def update(self, gen):
+ Node.update(self, gen)
+ for g in self.children:
+ g.update(gen)
+
+ for g in self.children:
+ gen.add_to(self.first, g.first)
+ gen.add_to(self.follow, g.follow)
+ for g in self.children:
+ gen.add_to(g.follow, self.follow)
+ if self.accepts_epsilon:
+ gen.add_to(self.first, self.follow)
+
+ def output(self, gen, indent):
+ test = "if"
+ gen.write(indent, "_token_ = ", gen.peek_call(self.first), "\n")
+ tokens_seen = []
+ tokens_unseen = self.first[:]
+ if gen['context-insensitive-scanner']:
+ # Context insensitive scanners can return ANY token,
+ # not only the ones in first.
+ tokens_unseen = gen.non_ignored_tokens()
+ for c in self.children:
+ testset = c.first[:]
+ removed = []
+ for x in testset:
+ if x in tokens_seen:
+ testset.remove(x)
+ removed.append(x)
+ if x in tokens_unseen: tokens_unseen.remove(x)
+ tokens_seen = tokens_seen + testset
+ if removed:
+ if not testset:
+ print 'Error in rule', self.rule+':', c, 'never matches.'
+ else:
+ print 'Warning:', self
+ print ' * These tokens are being ignored:', join(removed, ', ')
+ print ' due to previous choices using them.'
+
+ if testset:
+ if not tokens_unseen: # context sensitive scanners only!
+ if test=='if':
+ # if it's the first AND last test, then
+ # we can simply put the code without an if/else
+ c.output(gen, indent)
+ else:
+ gen.write(indent, "else: ")
+ t = gen.in_test('', [], testset)
+ if len(t) < 70-len(indent):
+ gen.write("#", t)
+ gen.write("\n")
+ c.output(gen, indent+INDENT)
+ else:
+ gen.write(indent, test, " ",
+ gen.in_test('_token_', tokens_unseen, testset),
+ ":\n")
+ c.output(gen, indent+INDENT)
+ test = "elif"
+
+ if gen['context-insensitive-scanner'] and tokens_unseen:
+ gen.write(indent, "else:\n")
+ gen.write(indent, INDENT, "raise SyntaxError(self._pos, ")
+ gen.write("'Could not match ", self.rule, "')\n")
+
+class Wrapper(Node):
+ def __init__(self, child):
+ Node.__init__(self)
+ self.child = child
+
+ def setup(self, gen, rule):
+ Node.setup(self, gen, rule)
+ self.child.setup(gen, rule)
+
+ def get_children(self):
+ return [self.child]
+
+ def update(self, gen):
+ Node.update(self, gen)
+ self.child.update(gen)
+ gen.add_to(self.first, self.child.first)
+ gen.equate(self.follow, self.child.follow)
+
+class Option(Wrapper):
+ def setup(self, gen, rule):
+ Wrapper.setup(self, gen, rule)
+ if not self.accepts_epsilon:
+ self.accepts_epsilon = 1
+ gen.changed()
+
+ def __str__(self):
+ return '[ %s ]' % str(self.child)
+
+ def output(self, gen, indent):
+ if self.child.accepts_epsilon:
+ print 'Warning in rule', self.rule+': contents may be empty.'
+ gen.write(indent, "if %s:\n" %
+ gen.peek_test(self.first, self.child.first))
+ self.child.output(gen, indent+INDENT)
+
+class Plus(Wrapper):
+ def setup(self, gen, rule):
+ Wrapper.setup(self, gen, rule)
+ if self.accepts_epsilon != self.child.accepts_epsilon:
+ self.accepts_epsilon = self.child.accepts_epsilon
+ gen.changed()
+
+ def __str__(self):
+ return '%s+' % str(self.child)
+
+ def update(self, gen):
+ Wrapper.update(self, gen)
+ gen.add_to(self.follow, self.first)
+
+ def output(self, gen, indent):
+ if self.child.accepts_epsilon:
+ print 'Warning in rule', self.rule+':'
+ print ' * The repeated pattern could be empty. The resulting'
+ print ' parser may not work properly.'
+ gen.write(indent, "while 1:\n")
+ self.child.output(gen, indent+INDENT)
+ union = self.first[:]
+ gen.add_to(union, self.follow)
+ gen.write(indent+INDENT, "if %s: break\n" %
+ gen.not_peek_test(union, self.child.first))
+
+class Star(Plus):
+ def setup(self, gen, rule):
+ Wrapper.setup(self, gen, rule)
+ if not self.accepts_epsilon:
+ self.accepts_epsilon = 1
+ gen.changed()
+
+ def __str__(self):
+ return '%s*' % str(self.child)
+
+ def output(self, gen, indent):
+ if self.child.accepts_epsilon:
+ print 'Warning in rule', self.rule+':'
+ print ' * The repeated pattern could be empty. The resulting'
+ print ' parser probably will not work properly.'
+ gen.write(indent, "while %s:\n" %
+ gen.peek_test(self.follow, self.child.first))
+ self.child.output(gen, indent+INDENT)
+
+######################################################################
+# The remainder of this file is from parsedesc.{g,py}
+
+def append(lst, x):
+ "Imperative append"
+ lst.append(x)
+ return lst
+
+def add_inline_token(tokens, str):
+ tokens.insert( 0, (str, eval(str, {}, {})) )
+ return Terminal(str)
+
+def cleanup_choice(lst):
+ if len(lst) == 0: return Sequence([])
+ if len(lst) == 1: return lst[0]
+ return apply(Choice, tuple(lst))
+
+def cleanup_sequence(lst):
+ if len(lst) == 1: return lst[0]
+ return apply(Sequence, tuple(lst))
+
+def cleanup_rep(node, rep):
+ if rep == 'star': return Star(node)
+ elif rep == 'plus': return Plus(node)
+ else: return node
+
+def resolve_name(tokens, id, args):
+ if id in map(lambda x: x[0], tokens):
+ # It's a token
+ if args:
+ print 'Warning: ignoring parameters on TOKEN %s<<%s>>' % (id, args)
+ return Terminal(id)
+ else:
+ # It's a name, so assume it's a nonterminal
+ return NonTerminal(id, args)
+
+
+from string import *
+import re
+from yappsrt import *
+
+class ParserDescriptionScanner(Scanner):
+ def __init__(self, str):
+ Scanner.__init__(self,[
+ ('"rule"', 'rule'),
+ ('"ignore"', 'ignore'),
+ ('"token"', 'token'),
+ ('"option"', 'option'),
+ ('":"', ':'),
+ ('"parser"', 'parser'),
+ ('[ \011\015\012]+', '[ \011\015\012]+'),
+ ('#.*?\015?\012', '#.*?\015?\012'),
+ ('END', '$'),
+ ('ATTR', '<<.+?>>'),
+ ('STMT', '{{.+?}}'),
+ ('ID', '[a-zA-Z_][a-zA-Z_0-9]*'),
+ ('STR', '[rR]?\'([^\\n\'\\\\]|\\\\.)*\'|[rR]?"([^\\n"\\\\]|\\\\.)*"'),
+ ('LP', '\\('),
+ ('RP', '\\)'),
+ ('LB', '\\['),
+ ('RB', '\\]'),
+ ('OR', '[|]'),
+ ('STAR', '[*]'),
+ ('PLUS', '[+]'),
+ ], ['[ \011\015\012]+', '#.*?\015?\012'], str)
+
+class ParserDescription(Parser):
+ def Parser(self):
+ self._scan('"parser"')
+ ID = self._scan('ID')
+ self._scan('":"')
+ Options = self.Options()
+ Tokens = self.Tokens()
+ Rules = self.Rules(Tokens)
+ END = self._scan('END')
+ return Generator(ID,Options,Tokens,Rules)
+
+ def Options(self):
+ opt = {}
+ while self._peek('"option"', '"token"', '"ignore"', 'END', '"rule"') == '"option"':
+ self._scan('"option"')
+ self._scan('":"')
+ Str = self.Str()
+ opt[Str] = 1
+ return opt
+
+ def Tokens(self):
+ tok = []
+ while self._peek('"token"', '"ignore"', 'END', '"rule"') in ['"token"', '"ignore"']:
+ _token_ = self._peek('"token"', '"ignore"')
+ if _token_ == '"token"':
+ self._scan('"token"')
+ ID = self._scan('ID')
+ self._scan('":"')
+ Str = self.Str()
+ tok.append( (ID,Str) )
+ else: # == '"ignore"'
+ self._scan('"ignore"')
+ self._scan('":"')
+ Str = self.Str()
+ tok.append( ('#ignore',Str) )
+ return tok
+
+ def Rules(self, tokens):
+ rul = []
+ while self._peek('"rule"', 'END') == '"rule"':
+ self._scan('"rule"')
+ ID = self._scan('ID')
+ OptParam = self.OptParam()
+ self._scan('":"')
+ ClauseA = self.ClauseA(tokens)
+ rul.append( (ID,OptParam,ClauseA) )
+ return rul
+
+ def ClauseA(self, tokens):
+ ClauseB = self.ClauseB(tokens)
+ v = [ClauseB]
+ while self._peek('OR', 'RP', 'RB', '"rule"', 'END') == 'OR':
+ OR = self._scan('OR')
+ ClauseB = self.ClauseB(tokens)
+ v.append(ClauseB)
+ return cleanup_choice(v)
+
+ def ClauseB(self, tokens):
+ v = []
+ while self._peek('STR', 'ID', 'LP', 'LB', 'STMT', 'OR', 'RP', 'RB', '"rule"', 'END') in ['STR', 'ID', 'LP', 'LB', 'STMT']:
+ ClauseC = self.ClauseC(tokens)
+ v.append(ClauseC)
+ return cleanup_sequence(v)
+
+ def ClauseC(self, tokens):
+ ClauseD = self.ClauseD(tokens)
+ _token_ = self._peek('PLUS', 'STAR', 'STR', 'ID', 'LP', 'LB', 'STMT', 'OR', 'RP', 'RB', '"rule"', 'END')
+ if _token_ == 'PLUS':
+ PLUS = self._scan('PLUS')
+ return Plus(ClauseD)
+ elif _token_ == 'STAR':
+ STAR = self._scan('STAR')
+ return Star(ClauseD)
+ else:
+ return ClauseD
+
+ def ClauseD(self, tokens):
+ _token_ = self._peek('STR', 'ID', 'LP', 'LB', 'STMT')
+ if _token_ == 'STR':
+ STR = self._scan('STR')
+ t = (STR, eval(STR,{},{}))
+ if t not in tokens: tokens.insert( 0, t )
+ return Terminal(STR)
+ elif _token_ == 'ID':
+ ID = self._scan('ID')
+ OptParam = self.OptParam()
+ return resolve_name(tokens, ID, OptParam)
+ elif _token_ == 'LP':
+ LP = self._scan('LP')
+ ClauseA = self.ClauseA(tokens)
+ RP = self._scan('RP')
+ return ClauseA
+ elif _token_ == 'LB':
+ LB = self._scan('LB')
+ ClauseA = self.ClauseA(tokens)
+ RB = self._scan('RB')
+ return Option(ClauseA)
+ else: # == 'STMT'
+ STMT = self._scan('STMT')
+ return Eval(STMT[2:-2])
+
+ def OptParam(self):
+ if self._peek('ATTR', '":"', 'PLUS', 'STAR', 'STR', 'ID', 'LP', 'LB', 'STMT', 'OR', 'RP', 'RB', '"rule"', 'END') == 'ATTR':
+ ATTR = self._scan('ATTR')
+ return ATTR[2:-2]
+ return ''
+
+ def Str(self):
+ STR = self._scan('STR')
+ return eval(STR,{},{})
+
+
+
+
+
+# This replaces the default main routine
+
+yapps_options = [
+ ('context-insensitive-scanner', 'context-insensitive-scanner',
+ 'Scan all tokens (see docs)')
+ ]
+
+def generate(inputfilename, outputfilename='', dump=0, **flags):
+ """Generate a grammar, given an input filename (X.g)
+ and an output filename (defaulting to X.py)."""
+
+ if not outputfilename:
+ if inputfilename[-2:]=='.g': outputfilename = inputfilename[:-2]+'.py'
+ else: raise "Invalid Filename", outputfilename
+
+ print 'Input Grammar:', inputfilename
+ print 'Output File:', outputfilename
+
+ DIVIDER = '\n%%\n' # This pattern separates the pre/post parsers
+ preparser, postparser = None, None # Code before and after the parser desc
+
+ # Read the entire file
+ s = open(inputfilename,'r').read()
+
+ # See if there's a separation between the pre-parser and parser
+ f = find(s, DIVIDER)
+ if f >= 0: preparser, s = s[:f]+'\n\n', s[f+len(DIVIDER):]
+
+ # See if there's a separation between the parser and post-parser
+ f = find(s, DIVIDER)
+ if f >= 0: s, postparser = s[:f], '\n\n'+s[f+len(DIVIDER):]
+
+ # Create the parser and scanner
+ p = ParserDescription(ParserDescriptionScanner(s))
+ if not p: return
+
+ # Now parse the file
+ t = wrap_error_reporter(p, 'Parser')
+ if not t: return # Error
+ if preparser is not None: t.preparser = preparser
+ if postparser is not None: t.postparser = postparser
+
+ # Check the options
+ for f in t.options.keys():
+ for opt,_,_ in yapps_options:
+ if f == opt: break
+ else:
+ print 'Warning: unrecognized option', f
+ # Add command line options to the set
+ for f in flags.keys(): t.options[f] = flags[f]
+
+ # Generate the output
+ if dump:
+ t.dump_information()
+ else:
+ t.output = open(outputfilename, 'w')
+ t.generate_output()
+
+if __name__=='__main__':
+ import sys, getopt
+ optlist, args = getopt.getopt(sys.argv[1:], 'f:', ['dump'])
+ if not args or len(args) > 2:
+ print 'Usage:'
+ print ' python', sys.argv[0], '[flags] input.g [output.py]'
+ print 'Flags:'
+ print (' --dump' + ' '*40)[:35] + 'Dump out grammar information'
+ for flag, _, doc in yapps_options:
+ print (' -f' + flag + ' '*40)[:35] + doc
+ else:
+ # Read in the options and create a list of flags
+ flags = {}
+ for opt in optlist:
+ for flag, name, _ in yapps_options:
+ if opt == ('-f', flag):
+ flags[name] = 1
+ break
+ else:
+ if opt == ('--dump', ''):
+ flags['dump'] = 1
+ else:
+ print 'Warning - unrecognized option: ', opt[0], opt[1]
+
+ apply(generate, tuple(args), flags)
diff --git a/util/sconfig/yapps2.tex b/util/sconfig/yapps2.tex
new file mode 100644
index 0000000..9d2bddf
--- /dev/null
+++ b/util/sconfig/yapps2.tex
@@ -0,0 +1,1225 @@
+\documentclass[10pt]{article}
+\usepackage{palatino}
+\usepackage{html}
+\usepackage{color}
+
+\setlength{\headsep}{0in}
+\setlength{\headheight}{0in}
+\setlength{\textheight}{8.5in}
+\setlength{\textwidth}{5.9in}
+\setlength{\oddsidemargin}{0.25in}
+
+\definecolor{darkblue}{rgb}{0,0,0.6}
+\definecolor{darkerblue}{rgb}{0,0,0.3}
+
+%% \newcommand{\mysection}[1]{\section{\textcolor{darkblue}{#1}}}
+%% \newcommand{\mysubsection}[1]{\subsection{\textcolor{darkerblue}{#1}}}
+\newcommand{\mysection}[1]{\section{#1}}
+\newcommand{\mysubsection}[1]{\subsection{#1}}
+
+\bodytext{bgcolor=white text=black link=#004080 vlink=#006020}
+
+\newcommand{\first}{\textsc{first}}
+\newcommand{\follow}{\textsc{follow}}
+
+\begin{document}
+
+\begin{center}
+\hfill \begin{tabular}{c}
+{\Large The \emph{Yapps} Parser Generator System}\\
+\verb|http://theory.stanford.edu/~amitp/Yapps/|\\
+ Version 2\\
+\\
+Amit J. Patel\\
+\htmladdnormallink{http://www-cs-students.stanford.edu/~amitp/}
+{http://www-cs-students.stanford.edu/~amitp/}
+
+\end{tabular} \hfill \rule{0in}{0in}
+\end{center}
+
+\mysection{Introduction}
+
+\emph{Yapps} (\underline{Y}et \underline{A}nother \underline{P}ython
+\underline{P}arser \underline{S}ystem) is an easy to use parser
+generator that is written in Python and generates Python code. There
+are several parser generator systems already available for Python,
+including \texttt{PyLR, kjParsing, PyBison,} and \texttt{mcf.pars,}
+but I had different goals for my parser. Yapps is simple, is easy to
+use, and produces human-readable parsers. It is not the fastest or
+most powerful parser. Yapps is designed to be used when regular
+expressions are not enough and other parser systems are too much:
+situations where you may write your own recursive descent parser.
+
+Some unusual features of Yapps that may be of interest are:
+
+\begin{enumerate}
+
+ \item Yapps produces recursive descent parsers that are readable by
+ humans, as opposed to table-driven parsers that are difficult to
+ read. A Yapps parser for a simple calculator looks similar to the
+ one that Mark Lutz wrote by hand for \emph{Programming Python.}
+
+ \item Yapps also allows for rules that accept parameters and pass
+ arguments to be used while parsing subexpressions. Grammars that
+ allow for arguments to be passed to subrules and for values to be
+ passed back are often called \emph{attribute grammars.} In many
+ cases parameterized rules can be used to perform actions at ``parse
+ time'' that are usually delayed until later. For example,
+ information about variable declarations can be passed into the
+ rules that parse a procedure body, so that undefined variables can
+ be detected at parse time. The types of defined variables can be
+ used in parsing as well---for example, if the type of {\tt X} is
+ known, we can determine whether {\tt X(1)} is an array reference or
+ a function call.
+
+ \item Yapps grammars are fairly easy to write, although there are
+ some inconveniences having to do with ELL(1) parsing that have to be
+ worked around. For example, rules have to be left factored and
+ rules may not be left recursive. However, neither limitation seems
+ to be a problem in practice.
+
+ Yapps grammars look similar to the notation used in the Python
+ reference manual, with operators like \verb:*:, \verb:+:, \verb:|:,
+ \verb:[]:, and \verb:(): for patterns, names ({\tt tim}) for rules,
+ regular expressions (\verb:"[a-z]+":) for tokens, and \verb:#: for
+ comments.
+
+ \item The Yapps parser generator is written as a single Python module
+ with no C extensions. Yapps produces parsers that are written
+ entirely in Python, and require only the Yapps run-time module (5k)
+ for support.
+
+ \item Yapps's scanner is context-sensitive, picking tokens based on
+ the types of the tokens accepted by the parser. This can be
+ helpful when implementing certain kinds of parsers, such as for a
+ preprocessor.
+
+\end{enumerate}
+
+There are several disadvantages of using Yapps over another parser system:
+
+\begin{enumerate}
+
+ \item Yapps parsers are \texttt{ELL(1)} (Extended LL(1)), which is
+ less powerful than \texttt{LALR} (used by \texttt{PyLR}) or
+ \texttt{SLR} (used by \texttt{kjParsing}), so Yapps would not be a
+ good choice for parsing complex languages. For example, allowing
+ both \texttt{x := 5;} and \texttt{x;} as statements is difficult
+ because we must distinguish based on only one token of lookahead.
+ Seeing only \texttt{x}, we cannot decide whether we have an
+ assignment statement or an expression statement. (Note however
+ that this kind of grammar can be matched with backtracking; see
+ section \ref{sec:future}.)
+
+ \item The scanner that Yapps provides can only read from strings, not
+ files, so an entire file has to be read in before scanning can
+ begin. It is possible to build a custom scanner, though, so in
+ cases where stream input is needed (from the console, a network, or
+ a large file are examples), the Yapps parser can be given a custom
+ scanner that reads from a stream instead of a string.
+
+ \item Yapps is not designed with efficiency in mind.
+
+\end{enumerate}
+
+Yapps provides an easy to use parser generator that produces parsers
+similar to what you might write by hand. It is not meant to be a
+solution for all parsing problems, but instead an aid for those times
+you would write a parser by hand rather than using one of the more
+powerful parsing packages available.
+
+Yapps 2.0 is easier to use than Yapps 1.0. New features include a
+less restrictive input syntax, which allows mixing of sequences,
+choices, terminals, and nonterminals; optional matching; the ability
+to insert single-line statements into the generated parser; and
+looping constructs \verb|*| and \verb|+| similar to the repetitive
+matching constructs in regular expressions. Unfortunately, the
+addition of these constructs has made Yapps 2.0 incompatible with
+Yapps 1.0, so grammars will have to be rewritten. See section
+\ref{sec:Upgrading} for tips on changing Yapps 1.0 grammars for use
+with Yapps 2.0.
+
+\mysection{Examples}
+
+In this section are several examples that show the use of Yapps.
+First, an introduction shows how to construct grammars and write them
+in Yapps form. This example can be skipped by someone familiar with
+grammars and parsing. Next is a Lisp expression grammar that produces
+a parse tree as output. This example demonstrates the use of tokens
+and rules, as well as returning values from rules. The third example
+is a expression evaluation grammar that evaluates during parsing
+(instead of producing a parse tree).
+
+\mysubsection{Introduction to Grammars}
+
+A \emph{grammar} for a natural language specifies how words can be put
+together to form large structures, such as phrases and sentences. A
+grammar for a computer language is similar in that it specifies how
+small components (called \emph{tokens}) can be put together to form
+larger structures. In this section we will write a grammar for a tiny
+subset of English.
+
+Simple English sentences can be described as being a noun phrase
+followed by a verb followed by a noun phrase. For example, in the
+sentence, ``Jack sank the blue ship,'' the word ``Jack'' is the first
+noun phrase, ``sank'' is the verb, and ``the blue ship'' is the second
+noun phrase. In addition we should say what a noun phrase is; for
+this example we shall say that a noun phrase is an optional article
+(a, an, the) followed by any number of adjectives followed by a noun.
+The tokens in our language are the articles, nouns, verbs, and
+adjectives. The \emph{rules} in our language will tell us how to
+combine the tokens together to form lists of adjectives, noun phrases,
+and sentences:
+
+\begin{itemize}
+ \item \texttt{sentence: noun\_phrase verb noun\_phrase}
+ \item \texttt{noun\_phrase: [article] adjective* noun}
+\end{itemize}
+
+Notice that some things that we said easily in English, such as
+``optional article,'' are expressed using special syntax, such as
+brackets. When we said, ``any number of adjectives,'' we wrote
+\texttt{adjective*}, where the \texttt{*} means ``zero or more of the
+preceding pattern''.
+
+The grammar given above is close to a Yapps grammar. We also have to
+specify what the tokens are, and what to do when a pattern is matched.
+For this example, we will do nothing when patterns are matched; the
+next example will explain how to perform match actions.
+
+\begin{verbatim}
+parser TinyEnglish:
+ ignore: "\\W+"
+ token noun: "(Jack|spam|ship)"
+ token verb: "(sank|threw)"
+ token article: "(a|an|the)"
+ token adjective: "(blue|red|green)"
+
+ rule sentence: noun_phrase verb noun_phrase
+ rule noun_phrase: [article] adjective* noun
+\end{verbatim}
+
+The tokens are specified as Python \emph{regular expressions}. Since
+Yapps produces Python code, you can write any regular expression that
+would be accepted by Python. (\emph{Note:} These are Python 1.5
+regular expressions from the \texttt{re} module, not Python 1.4
+regular expressions from the \texttt{regex} module.) In addition to
+tokens that you want to see (which are given names), you can also
+specify tokens to ignore, marked by the \texttt{ignore} keyword. In
+this parser we want to ignore whitespace.
+
+The TinyEnglish grammar shows how you define tokens and rules, but it
+does not specify what should happen once we've matched the rules. In
+the next example, we will take a grammar and produce a \emph{parse
+tree} from it.
+
+\mysubsection{Lisp Expressions}
+
+Lisp syntax, although hated by many, has a redeeming quality: it is
+simple to parse. In this section we will construct a Yapps grammar to
+parse Lisp expressions and produce a parse tree as output.
+
+\subsubsection*{Defining the Grammar}
+
+The syntax of Lisp is simple. It has expressions, which are
+identifiers, strings, numbers, and lists. A list is a left
+parenthesis followed by some number of expressions (separated by
+spaces) followed by a right parenthesis. For example, \verb|5|,
+\verb|"ni"|, and \verb|(print "1+2 = " (+ 1 2))| are Lisp expressions.
+Written as a grammar,
+
+\begin{verbatim}
+ expr: ID | STR | NUM | list
+ list: ( expr* )
+\end{verbatim}
+
+In addition to having a grammar, we need to specify what to do every
+time something is matched. For the tokens, which are strings, we just
+want to get the ``value'' of the token, attach its type (identifier,
+string, or number) in some way, and return it. For the lists, we want
+to construct and return a Python list.
+
+Once some pattern is matched, we enclose a return statement enclosed
+in \verb|{{...}}|. The braces allow us to insert any one-line
+statement into the parser. Within this statement, we can refer to the
+values returned by matching each part of the rule. After matching a
+token such as \texttt{ID}, ``ID'' will be bound to the text of the
+matched token. Let's take a look at the rule:
+
+\begin{verbatim}
+ rule expr: ID {{ return ('id', ID) }}
+ ...
+\end{verbatim}
+
+In a rule, tokens return the text that was matched. For identifiers,
+we just return the identifier, along with a ``tag'' telling us that
+this is an identifier and not a string or some other value. Sometimes
+we may need to convert this text to a different form. For example, if
+a string is matched, we want to remove quotes and handle special forms
+like \verb|\n|. If a number is matched, we want to convert it into a
+number. Let's look at the return values for the other tokens:
+
+\begin{verbatim}
+ ...
+ | STR {{ return ('str', eval(STR)) }}
+ | NUM {{ return ('num', atoi(NUM)) }}
+ ...
+\end{verbatim}
+
+If we get a string, we want to remove the quotes and process any
+special backslash codes, so we run \texttt{eval} on the quoted string.
+If we get a number, we convert it to an integer with \texttt{atoi} and
+then return the number along with its type tag.
+
+For matching a list, we need to do something slightly more
+complicated. If we match a Lisp list of expressions, we want to
+create a Python list with those values.
+
+\begin{verbatim}
+ rule list: "\\(" # Match the opening parenthesis
+ {{ result = [] }} # Create a Python list
+ (
+ expr # When we match an expression,
+ {{ result.append(expr) }} # add it to the list
+ )* # * means repeat this if needed
+ "\\)" # Match the closing parenthesis
+ {{ return result }} # Return the Python list
+\end{verbatim}
+
+In this rule we first match the opening parenthesis, then go into a
+loop. In this loop we match expressions and add them to the list.
+When there are no more expressions to match, we match the closing
+parenthesis and return the resulting. Note that \verb:#: is used for
+comments, just as in Python.
+
+The complete grammar is specified as follows:
+\begin{verbatim}
+parser Lisp:
+ ignore: '\\s+'
+ token NUM: '[0-9]+'
+ token ID: '[-+*/!@%^&=.a-zA-Z0-9_]+'
+ token STR: '"([^\\"]+|\\\\.)*"'
+
+ rule expr: ID {{ return ('id', ID) }}
+ | STR {{ return ('str', eval(STR)) }}
+ | NUM {{ return ('num', atoi(NUM)) }}
+ | list {{ return list }}
+ rule list: "\\(" {{ result = [] }}
+ ( expr {{ result.append(expr) }}
+ )*
+ "\\)" {{ return result }}
+\end{verbatim}
+
+One thing you may have noticed is that \verb|"\\("| and \verb|"\\)"|
+appear in the \texttt{list} rule. These are \emph{inline tokens}:
+they appear in the rules without being given a name with the
+\texttt{token} keyword. Inline tokens are more convenient to use, but
+since they do not have a name, the text that is matched cannot be used
+in the return value. They are best used for short simple patterns
+(usually punctuation or keywords).
+
+Another thing to notice is that the number and identifier tokens
+overlap. For example, ``487'' matches both NUM and ID. In Yapps, the
+scanner only tries to match tokens that are acceptable to the parser.
+This rule doesn't help here, since both NUM and ID can appear in the
+same place in the grammar. There are two rules used to pick tokens if
+more than one matches. One is that the \emph{longest} match is
+preferred. For example, ``487x'' will match as an ID (487x) rather
+than as a NUM (487) followed by an ID (x). The second rule is that if
+the two matches are the same length, the \emph{first} one listed in
+the grammar is preferred. For example, ``487'' will match as an NUM
+rather than an ID because NUM is listed first in the grammar. Inline
+tokens have preference over any tokens you have listed.
+
+Now that our grammar is defined, we can run Yapps to produce a parser,
+and then run the parser to produce a parse tree.
+
+\subsubsection*{Running Yapps}
+
+In the Yapps module is a function \texttt{generate} that takes an
+input filename and writes a parser to another file. We can use this
+function to generate the Lisp parser, which is assumed to be in
+\texttt{lisp.g}.
+
+\begin{verbatim}
+% python
+Python 1.5.1 (#1, Sep 3 1998, 22:51:17) [GCC 2.7.2.3] on linux-i386
+Copyright 1991-1995 Stichting Mathematisch Centrum, Amsterdam
+>>> import yapps
+>>> yapps.generate('lisp.g')
+\end{verbatim}
+
+At this point, Yapps has written a file \texttt{lisp.py} that contains
+the parser. In that file are two classes (one scanner and one parser)
+and a function (called \texttt{parse}) that puts things together for
+you.
+
+Alternatively, we can run Yapps from the command line to generate the
+parser file:
+
+\begin{verbatim}
+% python yapps.py lisp.g
+\end{verbatim}
+
+After running Yapps either from within Python or from the command
+line, we can use the Lisp parser by calling the \texttt{parse}
+function. The first parameter should be the rule we want to match,
+and the second parameter should be the string to parse.
+
+\begin{verbatim}
+>>> import lisp
+>>> lisp.parse('expr', '(+ 3 4)')
+[('id', '+'), ('num', 3), ('num', 4)]
+>>> lisp.parse('expr', '(print "3 = " (+ 1 2))')
+[('id', 'print'), ('str', '3 = '), [('id', '+'), ('num', 1), ('num', 2)]]
+\end{verbatim}
+
+The \texttt{parse} function is not the only way to use the parser;
+section \ref{sec:Parser-Objects} describes how to access parser objects
+directly.
+
+We've now gone through the steps in creating a grammar, writing a
+grammar file for Yapps, producing a parser, and using the parser. In
+the next example we'll see how rules can take parameters and also how
+to do computations instead of just returning a parse tree.
+
+\mysubsection{Calculator}
+
+A common example parser given in many textbooks is that for simple
+expressions, with numbers, addition, subtraction, multiplication,
+division, and parenthesization of subexpressions. We'll write this
+example in Yapps, evaluating the expression as we parse.
+
+Unlike \texttt{yacc}, Yapps does not have any way to specify
+precedence rules, so we have to do it ourselves. We say that an
+expression is the sum of terms, and that a term is the product of
+factors, and that a factor is a number or a parenthesized expression:
+
+\begin{verbatim}
+ expr: factor ( ("+"|"-") factor )*
+ factor: term ( ("*"|"/") term )*
+ term: NUM | "(" expr ")"
+\end{verbatim}
+
+In order to evaluate the expression as we go, we should keep along an
+accumulator while evaluating the lists of terms or factors. Just as
+we kept a ``result'' variable to build a parse tree for Lisp
+expressions, we will use a variable to evaluate numerical
+expressions. The full grammar is given below:
+
+\begin{verbatim}
+parser Calculator:
+ token END: "$" # $ means end of string
+ token NUM: "[0-9]+"
+
+ rule goal: expr END {{ return expr }}
+
+ # An expression is the sum and difference of factors
+ rule expr: factor {{ v = factor }}
+ ( "[+]" factor {{ v = v+factor }}
+ | "-" factor {{ v = v-factor }}
+ )* {{ return v }}
+
+ # A factor is the product and division of terms
+ rule factor: term {{ v = term }}
+ ( "[*]" term {{ v = v*term }}
+ | "/" term {{ v = v/term }}
+ )* {{ return v }}
+
+ # A term is either a number or an expression surrounded by parentheses
+ rule term: NUM {{ return atoi(NUM) }}
+ | "\\(" expr "\\)" {{ return expr }}
+\end{verbatim}
+
+The top-level rule is \emph{goal}, which says that we are looking for
+an expression followed by the end of the string. The \texttt{END}
+token is needed because without it, it isn't clear when to stop
+parsing. For example, the string ``1+3'' could be parsed either as
+the expression ``1'' followed by the string ``+3'' or it could be
+parsed as the expression ``1+3''. By requiring expressions to end
+with \texttt{END}, the parser is forced to take ``1+3''.
+
+In the two rules with repetition, the accumulator is named \texttt{v}.
+After reading in one expression, we initialize the accumulator. Each
+time through the loop, we modify the accumulator by adding,
+subtracting, multiplying by, or dividing the previous accumulator by
+the expression that has been parsed. At the end of the rule, we
+return the accumulator.
+
+The calculator example shows how to process lists of elements using
+loops, as well as how to handle precedence of operators.
+
+\emph{Note:} It's often important to put the \texttt{END} token in, so
+put it in unless you are sure that your grammar has some other
+non-ambiguous token marking the end of the program.
+
+\mysubsection{Calculator with Memory}
+
+In the previous example we learned how to write a calculator that
+evaluates simple numerical expressions. In this section we will
+extend the example to support both local and global variables.
+
+To support global variables, we will add assignment statements to the
+``goal'' rule.
+
+\begin{verbatim}
+ rule goal: expr END {{ return expr }}
+ | 'set' ID expr END {{ global_vars[ID] = expr }}
+ {{ return expr }}
+\end{verbatim}
+
+To use these variables, we need a new kind of terminal:
+
+\begin{verbatim}
+ rule term: ... | ID {{ return global_vars[ID] }}
+\end{verbatim}
+
+So far, these changes are straightforward. We simply have a global
+dictionary \texttt{global\_vars} that stores the variables and values,
+we modify it when there is an assignment statement, and we look up
+variables in it when we see a variable name.
+
+To support local variables, we will add variable declarations to the
+set of allowed expressions.
+
+\begin{verbatim}
+ rule term: ... | 'let' VAR '=' expr 'in' expr ...
+\end{verbatim}
+
+This is where it becomes tricky. Local variables should be stored in
+a local dictionary, not in the global one. One trick would be to save
+a copy of the global dictionary, modify it, and then restore it
+later. In this example we will instead use \emph{attributes} to
+create local information and pass it to subrules.
+
+A rule can optionally take parameters. When we invoke the rule, we
+must pass in arguments. For local variables, let's use a single
+parameter, \texttt{local\_vars}:
+
+\begin{verbatim}
+ rule expr<<local_vars>>: ...
+ rule factor<<local_vars>>: ...
+ rule term<<local_vars>>: ...
+\end{verbatim}
+
+Each time we want to match \texttt{expr}, \texttt{factor}, or
+\texttt{term}, we will pass the local variables in the current rule to
+the subrule. One interesting case is when we pass as an argument
+something \emph{other} than \texttt{local\_vars}:
+
+\begin{verbatim}
+ rule term<<local_vars>>: ...
+ | 'let' VAR '=' expr<<local_vars>>
+ {{ local_vars = [(VAR, expr)] + local_vars }}
+ 'in' expr<<local_vars>>
+ {{ return expr }}
+\end{verbatim}
+
+Note that the assignment to the local variables list does not modify
+the original list. This is important to keep local variables from
+being seen outside the ``let''.
+
+The other interesting case is when we find a variable:
+
+\begin{verbatim}
+global_vars = {}
+
+def lookup(map, name):
+ for x,v in map: if x==name: return v
+ return global_vars[name]
+%%
+ ...
+ rule term<<local_vars>: ...
+ | VAR {{ return lookup(local_vars, VAR) }}
+\end{verbatim}
+
+The lookup function will search through the local variable list, and
+if it cannot find the name there, it will look it up in the global
+variable dictionary.
+
+A complete grammar for this example, including a read-eval-print loop
+for interacting with the calculator, can be found in the examples
+subdirectory included with Yapps.
+
+In this section we saw how to insert code before the parser. We also
+saw how to use attributes to transmit local information from one rule
+to its subrules.
+
+\mysection{Grammars}
+
+Each Yapps grammar has a name, a list of tokens, and a set of
+production rules. A grammar named \texttt{X} will be used to produce
+a parser named \texttt{X} and a scanner anmed \texttt{XScanner}. As
+in Python, names are case sensitive, start with a letter, and contain
+letters, numbers, and underscores (\_).
+
+There are three kinds of tokens in Yapps: named, inline, and ignored.
+As their name implies, named tokens are given a name, using the token
+construct: \texttt{token \emph{name} : \emph{regexp}}. In a rule, the
+token can be matched by using the name. Inline tokens are regular
+expressions that are used in rules without being declared. Ignored
+tokens are declared using the ignore construct: \texttt{ignore:
+ \emph{regexp}}. These tokens are ignored by the scanner, and are
+not seen by the parser. Often whitespace is an ignored token. The
+regular expressions used to define tokens should use the syntax
+defined in the \texttt{re} module, so some symbols may have to be
+backslashed.
+
+Production rules in Yapps have a name and a pattern to match. If the
+rule is parameterized, the name should be followed by a list of
+parameter names in \verb|<<...>>|. A pattern can be a simple pattern
+or a compound pattern. Simple patterns are the name of a named token,
+a regular expression in quotes (inline token), the name of a
+production rule (followed by arguments in \verb|<<...>>|, if the rule
+has parameters), and single line Python statements (\verb|{{...}}|).
+Compound patterns are sequences (\verb|A B C ...|), choices (
+\verb:A | B | C | ...:), options (\verb|[...]|), zero-or-more repetitions
+(\verb|...*|), and one-or-more repetitions (\verb|...+|). Like
+regular expressions, repetition operators have a higher precedence
+than sequences, and sequences have a higher precedence than choices.
+
+Whenever \verb|{{...}}| is used, a legal one-line Python statement
+should be put inside the braces. The token \verb|}}| should not
+appear within the \verb|{{...}}| section, even within a string, since
+Yapps does not attempt to parse the Python statement. A workaround
+for strings is to put two strings together (\verb|"}" "}"|), or to use
+backslashes (\verb|"}\}"|). At the end of a rule you should use a
+\verb|{{ return X }}| statement to return a value. However, you
+should \emph{not} use any control statements (\texttt{return},
+\texttt{continue}, \texttt{break}) in the middle of a rule. Yapps
+needs to make assumptions about the control flow to generate a parser,
+and any changes to the control flow will confuse Yapps.
+
+The \verb|<<...>>| form can occur in two places: to define parameters
+to a rule and to give arguments when matching a rule. Parameters use
+the syntax used for Python functions, so they can include default
+arguments and the special forms (\verb|*args| and \verb|**kwargs|).
+Arguments use the syntax for Python function call arguments, so they
+can include normal arguments and keyword arguments. The token
+\verb|>>| should not appear within the \verb|<<...>>| section.
+
+In both the statements and rule arguments, you can use names defined
+by the parser to refer to matched patterns. You can refer to the text
+matched by a named token by using the token name. You can use the
+value returned by a production rule by using the name of that rule.
+If a name \texttt{X} is matched more than once (such as in loops), you
+will have to save the earlier value(s) in a temporary variable, and
+then use that temporary variable in the return value. The next
+section has an example of a name that occurs more than once.
+
+\mysubsection{Left Factoring}
+\label{sec:Left-Factoring}
+
+Yapps produces ELL(1) parsers, which determine which clause to match
+based on the first token available. Sometimes the leftmost tokens of
+several clauses may be the same. The classic example is the
+\emph{if/then/else} construct in Pascal:
+
+\begin{verbatim}
+rule stmt: "if" expr "then" stmt {{ then_part = stmt }}
+ "else" stmt {{ return ('If',expr,then_part,stmt) }}
+ | "if" expr "then" stmt {{ return ('If',expr,stmt,[]) }}
+\end{verbatim}
+
+(Note that we have to save the first \texttt{stmt} into a variable
+because there is another \texttt{stmt} that will be matched.) The
+left portions of the two clauses are the same, which presents a
+problem for the parser. The solution is \emph{left-factoring}: the
+common parts are put together, and \emph{then} a choice is made about
+the remaining part:
+
+\begin{verbatim}
+rule stmt: "if" expr
+ "then" stmt {{ then_part = stmt }}
+ {{ else_part = [] }}
+ [ "else" stmt {{ else_part = stmt }} ]
+ {{ return ('If', expr, then_part, else_part) }}
+\end{verbatim}
+
+Unfortunately, the classic \emph{if/then/else} situation is
+\emph{still} ambiguous when you left-factor. Yapps can deal with this
+situation, but will report a warning; see section
+\ref{sec:Ambiguous-Grammars} for details.
+
+In general, replace rules of the form:
+
+\begin{verbatim}
+rule A: a b1 {{ return E1 }}
+ | a b2 {{ return E2 }}
+ | c3 {{ return E3 }}
+ | c4 {{ return E4 }}
+\end{verbatim}
+
+with rules of the form:
+
+\begin{verbatim}
+rule A: a ( b1 {{ return E1 }}
+ | b2 {{ return E2 }}
+ )
+ | c3 {{ return E3 }}
+ | c4 {{ return E4 }}
+\end{verbatim}
+
+\mysubsection{Left Recursion}
+
+A common construct in grammars is for matching a list of patterns,
+sometimes separated with delimiters such as commas or semicolons. In
+LR-based parser systems, we can parse a list with something like this:
+
+\begin{verbatim}
+rule sum: NUM {{ return NUM }}
+ | sum "+" NUM {{ return (sum, NUM) }}
+\end{verbatim}
+
+Parsing \texttt{1+2+3+4} would produce the output
+\texttt{(((1,2),3),4)}, which is what we want from a left-associative
+addition operator. Unfortunately, this grammar is \emph{left
+recursive,} because the \texttt{sum} rule contains a clause that
+begins with \texttt{sum}. (The recursion occurs at the left side of
+the clause.)
+
+We must restructure this grammar to be \emph{right recursive} instead:
+
+\begin{verbatim}
+rule sum: NUM {{ return NUM }}
+ | NUM "+" sum {{ return (NUM, sum) }}
+\end{verbatim}
+
+Unfortunately, using this grammar, \texttt{1+2+3+4} would be parsed as
+\texttt{(1,(2,(3,4)))}, which no longer follows left associativity.
+The rule also needs to be left-factored. Instead, we write the
+pattern as a loop instead:
+
+\begin{verbatim}
+rule sum: NUM {{ v = NUM }}
+ ( "[+]" NUM {{ v = (v,NUM) }} )*
+ {{ return v }}
+\end{verbatim}
+
+In general, replace rules of the form:
+
+\begin{verbatim}
+rule A: A a1 -> << E1 >>
+ | A a2 -> << E2 >>
+ | b3 -> << E3 >>
+ | b4 -> << E4 >>
+\end{verbatim}
+
+with rules of the form:
+
+\begin{verbatim}
+rule A: ( b3 {{ A = E3 }}
+ | b4 {{ A = E4 }} )
+ ( a1 {{ A = E1 }}
+ | a2 {{ A = E2 }} )*
+ {{ return A }}
+\end{verbatim}
+
+We have taken a rule that proved problematic for with recursion and
+turned it into a rule that works well with looping constructs.
+
+\mysubsection{Ambiguous Grammars}
+\label{sec:Ambiguous-Grammars}
+
+In section \ref{sec:Left-Factoring} we saw the classic if/then/else
+ambiguity, which occurs because the ``else \ldots'' portion of an ``if
+\ldots then \ldots else \ldots'' construct is optional. Programs with
+nested if/then/else constructs can be ambiguous when one of the else
+clauses is missing:
+\begin{verbatim}
+if 1 then if 1 then
+ if 5 then if 5 then
+ x := 1; x := 1;
+ else else
+ y := 9; y := 9;
+\end{verbatim}
+
+The indentation shows that the program can be parsed in two different
+ways. (Of course, if we all would adopt Python's indentation-based
+structuring, this would never happen!) Usually we want the parsing on
+the left: the ``else'' should be associated with the closest ``if''
+statement. In section \ref{sec:Left-Factoring} we ``solved'' the
+problem by using the following grammar:
+
+\begin{verbatim}
+rule stmt: "if" expr
+ "then" stmt {{ then_part = stmt }}
+ {{ else_part = [] }}
+ [ "else" stmt {{ else_part = stmt }} ]
+ {{ return ('If', expr, then_part, else_part) }}
+\end{verbatim}
+
+Here, we have an optional match of ``else'' followed by a statement.
+The ambiguity is that if an ``else'' is present, it is not clear
+whether you want it parsed immediately or if you want it to be parsed
+by the outer ``if''.
+
+Yapps will deal with the situation by matching when the else pattern
+when it can. The parser will work in this case because it prefers the
+\emph{first} matching clause, which tells Yapps to parse the ``else''.
+That is exactly what we want!
+
+For ambiguity cases with choices, Yapps will choose the \emph{first}
+matching choice. However, remember that Yapps only looks at the first
+token to determine its decision, so {\tt (a b | a c)} will result in
+Yapps choosing {\tt a b} even when the input is {\tt a c}. It only
+looks at the first token, {\tt a}, to make its decision.
+
+\mysection{Customization}
+
+Both the parsers and the scanners can be customized. The parser is
+usually extended by subclassing, and the scanner can either be
+subclassed or completely replaced.
+
+\mysubsection{Customizing Parsers}
+
+If additional fields and methods are needed in order for a parser to
+work, Python subclassing can be used. (This is unlike parser classes
+written in static languages, in which these fields and methods must be
+defined in the generated parser class.) We simply subclass the
+generated parser, and add any fields or methods required. Expressions
+in the grammar can call methods of the subclass to perform any actions
+that cannot be expressed as a simple expression. For example,
+consider this simple grammar:
+
+\begin{verbatim}
+parser X:
+ rule goal: "something" {{ self.printmsg() }}
+\end{verbatim}
+
+The \texttt{printmsg} function need not be implemented in the parser
+class \texttt{X}; it can be implemented in a subclass:
+
+\begin{verbatim}
+import Xparser
+
+class MyX(Xparser.X):
+ def printmsg(self):
+ print "Hello!"
+\end{verbatim}
+
+\mysubsection{Customizing Scanners}
+
+The generated parser class is not dependent on the generated scanner
+class. A scanner object is passed to the parser object's constructor
+in the \texttt{parse} function. To use a different scanner, write
+your own function to construct parser objects, with an instance of a
+different scanner. Scanner objects must have a \texttt{token} method
+that accepts an integer \texttt{N} as well as a list of allowed token
+types, and returns the Nth token, as a tuple. The default scanner
+raises \texttt{NoMoreTokens} if no tokens are available, and
+\texttt{SyntaxError} if no token could be matched. However, the
+parser does not rely on these exceptions; only the \texttt{parse}
+convenience function (which calls \texttt{wrap\_error\_reporter}) and
+the \texttt{print\_error} error display function use those exceptions.
+
+The tuples representing tokens have four elements. The first two are
+the beginning and ending indices of the matched text in the input
+string. The third element is the type tag, matching either the name
+of a named token or the quoted regexp of an inline or ignored token.
+The fourth element of the token tuple is the matched text. If the
+input string is \texttt{s}, and the token tuple is
+\texttt{(b,e,type,val)}, then \texttt{val} should be equal to
+\texttt{s[b:e]}.
+
+The generated parsers do not the beginning or ending index. They use
+only the token type and value. However, the default error reporter
+uses the beginning and ending index to show the user where the error
+is.
+
+\mysection{Parser Mechanics}
+
+The base parser class (Parser) defines two methods, \texttt{\_scan}
+and \texttt{\_peek}, and two fields, \texttt{\_pos} and
+\texttt{\_scanner}. The generated parser inherits from the base
+parser, and contains one method for each rule in the grammar. To
+avoid name clashes, do not use names that begin with an underscore
+(\texttt{\_}).
+
+\mysubsection{Parser Objects}
+\label{sec:Parser-Objects}
+
+Yapps produces as output two exception classes, a scanner class, a
+parser class, and a function \texttt{parse} that puts everything
+together. The \texttt{parse} function does not have to be used;
+instead, one can create a parser and scanner object and use them
+together for parsing.
+
+\begin{verbatim}
+ def parse(rule, text):
+ P = X(XScanner(text))
+ return wrap_error_reporter(P, rule)
+\end{verbatim}
+
+The \texttt{parse} function takes a name of a rule and an input string
+as input. It creates a scanner and parser object, then calls
+\texttt{wrap\_error\_reporter} to execute the method in the parser
+object named \texttt{rule}. The wrapper function will call the
+appropriate parser rule and report any parsing errors to standard
+output.
+
+There are several situations in which the \texttt{parse} function
+would not be useful. If a different parser or scanner is being used,
+or exceptions are to be handled differently, a new \texttt{parse}
+function would be required. The supplied \texttt{parse} function can
+be used as a template for writing a function for your own needs. An
+example of a custom parse function is the \texttt{generate} function
+in \texttt{Yapps.py}.
+
+\mysubsection{Context Sensitive Scanner}
+
+Unlike most scanners, the scanner produced by Yapps can take into
+account the context in which tokens are needed, and try to match only
+good tokens. For example, in the grammar:
+
+\begin{verbatim}
+parser IniFile:
+ token ID: "[a-zA-Z_0-9]+"
+ token VAL: ".*"
+
+ rule pair: ID "[ \t]*=[ \t]*" VAL "\n"
+\end{verbatim}
+
+we would like to scan lines of text and pick out a name/value pair.
+In a conventional scanner, the input string \texttt{shell=progman.exe}
+would be turned into a single token of type \texttt{VAL}. The Yapps
+scanner, however, knows that at the beginning of the line, an
+\texttt{ID} is expected, so it will return \texttt{"shell"} as a token
+of type \texttt{ID}. Later, it will return \texttt{"progman.exe"} as
+a token of type \texttt{VAL}.
+
+Context sensitivity decreases the separation between scanner and
+parser, but it is useful in parsers like \texttt{IniFile}, where the
+tokens themselves are not unambiguous, but \emph{are} unambiguous
+given a particular stage in the parsing process.
+
+Unfortunately, context sensitivity can make it more difficult to
+detect errors in the input. For example, in parsing a Pascal-like
+language with ``begin'' and ``end'' as keywords, a context sensitive
+scanner would only match ``end'' as the END token if the parser is in
+a place that will accept the END token. If not, then the scanner
+would match ``end'' as an identifier. To disable the context
+sensitive scanner in Yapps, add the
+\texttt{context-insensitive-scanner} option to the grammar:
+
+\begin{verbatim}
+Parser X:
+ option: "context-insensitive-scanner"
+\end{verbatim}
+
+Context-insensitive scanning makes the parser look cleaner as well.
+
+\mysubsection{Internal Variables}
+
+There are two internal fields that may be of use. The parser object
+has two fields, \texttt{\_pos}, which is the index of the current
+token being matched, and \texttt{\_scanner}, which is the scanner
+object. The token itself can be retrieved by accessing the scanner
+object and calling the \texttt{token} method with the token index. However, if you call \texttt{token} before the token has been requested by the parser, it may mess up a context-sensitive scanner.\footnote{When using a context-sensitive scanner, the parser tells the scanner what the valid token types are at each point. If you call \texttt{token} before the parser can tell the scanner the valid token types, the scanner will attempt to match without considering the context.} A
+potentially useful combination of these fields is to extract the
+portion of the input matched by the current rule. To do this, just save the scanner state (\texttt{\_scanner.pos}) before the text is matched and then again after the text is matched:
+
+\begin{verbatim}
+ rule R:
+ {{ start = self._scanner.pos }}
+ a b c
+ {{ end = self._scanner.pos }}
+ {{ print 'Text is', self._scanner.input[start:end] }}
+\end{verbatim}
+
+\mysubsection{Pre- and Post-Parser Code}
+
+Sometimes the parser code needs to rely on helper variables,
+functions, and classes. A Yapps grammar can optionally be surrounded
+by double percent signs, to separate the grammar from Python code.
+
+\begin{verbatim}
+... Python code ...
+%%
+... Yapps grammar ...
+%%
+... Python code ...
+\end{verbatim}
+
+The second \verb|%%| can be omitted if there is no Python code at the
+end, and the first \verb|%%| can be omitted if there is no extra
+Python code at all. (To have code only at the end, both separators
+are required.)
+
+If the second \verb|%%| is omitted, Yapps will insert testing code
+that allows you to use the generated parser to parse a file.
+
+The extended calculator example in the Yapps examples subdirectory
+includes both pre-parser and post-parser code.
+
+\mysubsection{Representation of Grammars}
+
+For each kind of pattern there is a class derived from Pattern. Yapps
+has classes for Terminal, NonTerminal, Sequence, Choice, Option, Plus,
+Star, and Eval. Each of these classes has the following interface:
+
+\begin{itemize}
+ \item[setup(\emph{gen})] Set accepts-$\epsilon$, and call
+ \emph{gen.changed()} if it changed. This function can change the
+ flag from false to true but \emph{not} from true to false.
+ \item[update(\emph(gen))] Set \first and \follow, and call
+ \emph{gen.changed()} if either changed. This function can add to
+ the sets but \emph{not} remove from them.
+ \item[output(\emph{gen}, \emph{indent})] Generate code for matching
+ this rule, using \emph{indent} as the current indentation level.
+ Writes are performed using \emph{gen.write}.
+ \item[used(\emph{vars})] Given a list of variables \emph{vars},
+ return two lists: one containing the variables that are used, and
+ one containing the variables that are assigned. This function is
+ used for optimizing the resulting code.
+\end{itemize}
+
+Both \emph{setup} and \emph{update} monotonically increase the
+variables they modify. Since the variables can only increase a finite
+number of times, we can repeatedly call the function until the
+variable stabilized. The \emph{used} function is not currently
+implemented.
+
+With each pattern in the grammar Yapps associates three pieces of
+information: the \first set, the \follow set, and the
+accepts-$\epsilon$ flag.
+
+The \first set contains the tokens that can appear as we start
+matching the pattern. The \follow set contains the tokens that can
+appear immediately after we match the pattern. The accepts-$\epsilon$
+flag is true if the pattern can match no tokens. In this case, \first
+will contain all the elements in \follow. The \follow set is not
+needed when accepts-$\epsilon$ is false, and may not be accurate in
+those cases.
+
+Yapps does not compute these sets precisely. Its approximation can
+miss certain cases, such as this one:
+
+\begin{verbatim}
+ rule C: ( A* | B )
+ rule B: C [A]
+\end{verbatim}
+
+Yapps will calculate {\tt C}'s \follow set to include {\tt A}.
+However, {\tt C} will always match all the {\tt A}'s, so {\tt A} will
+never follow it. Yapps 2.0 does not properly handle this construct,
+but if it seems important, I may add support for it in a future
+version.
+
+Yapps also cannot handle constructs that depend on the calling
+sequence. For example:
+
+\begin{verbatim}
+ rule R: U | 'b'
+ rule S: | 'c'
+ rule T: S 'b'
+ rule U: S 'a'
+\end{verbatim}
+
+The \follow set for {\tt S} includes {\tt a} and {\tt b}. Since {\tt
+ S} can be empty, the \first set for {\tt S} should include {\tt a},
+{\tt b}, and {\tt c}. However, when parsing {\tt R}, if the lookahead
+is {\tt b} we should \emph{not} parse {\tt U}. That's because in {\tt
+ U}, {\tt S} is followed by {\tt a} and not {\tt b}. Therefore in
+{\tt R}, we should choose rule {\tt U} only if there is an {\tt a} or
+{\tt c}, but not if there is a {\tt b}. Yapps and many other LL(1)
+systems do not distinguish {\tt S b} and {\tt S a}, making {\tt
+ S}'s \follow set {\tt a, b}, and making {\tt R} always try to match
+{\tt U}. In this case we can solve the problem by changing {\tt R} to
+\verb:'b' | U: but it may not always be possible to solve all such
+problems in this way.
+
+\appendix
+
+\mysection{Grammar for Parsers}
+
+This is the grammar for parsers, without any Python code mixed in.
+The complete grammar can be found in \texttt{parsedesc.g} in the Yapps
+distribution.
+
+\begin{verbatim}
+parser ParserDescription:
+ ignore: "\\s+"
+ ignore: "#.*?\r?\n"
+ token END: "$" # $ means end of string
+ token ATTR: "<<.+?>>"
+ token STMT: "{{.+?}}"
+ token ID: '[a-zA-Z_][a-zA-Z_0-9]*'
+ token STR: '[rR]?\'([^\\n\'\\\\]|\\\\.)*\'|[rR]?"([^\\n"\\\\]|\\\\.)*"'
+
+ rule Parser: "parser" ID ":"
+ Options
+ Tokens
+ Rules
+ END
+
+ rule Options: ( "option" ":" STR )*
+ rule Tokens: ( "token" ID ":" STR | "ignore" ":" STR )*
+ rule Rules: ( "rule" ID OptParam ":" ClauseA )*
+
+ rule ClauseA: ClauseB ( '[|]' ClauseB )*
+ rule ClauseB: ClauseC*
+ rule ClauseC: ClauseD [ '[+]' | '[*]' ]
+ rule ClauseD: STR | ID [ATTR] | STMT
+ | '\\(' ClauseA '\\) | '\\[' ClauseA '\\]'
+\end{verbatim}
+
+\mysection{Upgrading}
+
+Yapps 2.0 is not backwards compatible with Yapps 1.0. In this section
+are some tips for upgrading:
+
+\begin{enumerate}
+ \item Yapps 1.0 was distributed as a single file. Yapps 2.0 is
+ instead distributed as two Python files: a \emph{parser generator}
+ (26k) and a \emph{parser runtime} (5k). You need both files to
+ create parsers, but you need only the runtime (\texttt{yappsrt.py})
+ to use the parsers.
+
+ \item Yapps 1.0 supported Python 1.4 regular expressions from the
+ \texttt{regex} module. Yapps 2.0 uses Python 1.5 regular
+ expressions from the \texttt{re} module. \emph{The new syntax for
+ regular expressions is not compatible with the old syntax.}
+ Andrew Kuchling has a \htmladdnormallink{guide to converting
+ regular
+ expressions}{http://www.python.org/doc/howto/regex-to-re/} on his
+ web page.
+
+ \item Yapps 1.0 wants a pattern and then a return value in \verb|->|
+ \verb|<<...>>|. Yapps 2.0 allows patterns and Python statements to
+ be mixed. To convert a rule like this:
+
+\begin{verbatim}
+rule R: A B C -> << E1 >>
+ | X Y Z -> << E2 >>
+\end{verbatim}
+
+ to Yapps 2.0 form, replace the return value specifiers with return
+ statements:
+
+\begin{verbatim}
+rule R: A B C {{ return E1 }}
+ | X Y Z {{ return E2 }}
+\end{verbatim}
+
+ \item Yapps 2.0 does not perform tail recursion elimination. This
+ means any recursive rules you write will be turned into recursive
+ methods in the parser. The parser will work, but may be slower.
+ It can be made faster by rewriting recursive rules, using instead
+ the looping operators \verb|*| and \verb|+| provided in Yapps 2.0.
+
+\end{enumerate}
+
+\mysection{Troubleshooting}
+
+\begin{itemize}
+ \item A common error is to write a grammar that doesn't have an END
+ token. End tokens are needed when it is not clear when to stop
+ parsing. For example, when parsing the expression {\tt 3+5}, it is
+ not clear after reading {\tt 3} whether to treat it as a complete
+ expression or whether the parser should continue reading.
+ Therefore the grammar for numeric expressions should include an end
+ token. Another example is the grammar for Lisp expressions. In
+ Lisp, it is always clear when you should stop parsing, so you do
+ \emph{not} need an end token. In fact, it may be more useful not
+ to have an end token, so that you can read in several Lisp expressions.
+ \item If there is a chance of ambiguity, make sure to put the choices
+ in the order you want them checked. Usually the most specific
+ choice should be first. Empty sequences should usually be last.
+ \item The context sensitive scanner is not appropriate for all
+ grammars. You might try using the insensitive scanner with the
+ {\tt context-insensitive-scanner} option in the grammar.
+ \item If performance turns out to be a problem, try writing a custom
+ scanner. The Yapps scanner is rather slow (but flexible and easy
+ to understand).
+\end{itemize}
+
+\mysection{History}
+
+Yapps 1 had several limitations that bothered me while writing
+parsers:
+
+\begin{enumerate}
+ \item It was not possible to insert statements into the generated
+ parser. A common workaround was to write an auxilliary function
+ that executed those statements, and to call that function as part
+ of the return value calculation. For example, several of my
+ parsers had an ``append(x,y)'' function that existed solely to call
+ ``x.append(y)''.
+ \item The way in which grammars were specified was rather
+ restrictive: a rule was a choice of clauses. Each clause was a
+ sequence of tokens and rule names, followed by a return value.
+ \item Optional matching had to be put into a separate rule because
+ choices were only made at the beginning of a rule.
+ \item Repetition had to be specified in terms of recursion. Not only
+ was this awkward (sometimes requiring additional rules), I had to
+ add a tail recursion optimization to Yapps to transform the
+ recursion back into a loop.
+\end{enumerate}
+
+Yapps 2 addresses each of these limitations.
+
+\begin{enumerate}
+ \item Statements can occur anywhere within a rule. (However, only
+ one-line statements are allowed; multiline blocks marked by
+ indentation are not.)
+ \item Grammars can be specified using any mix of sequences, choices,
+ tokens, and rule names. To allow for complex structures,
+ parentheses can be used for grouping.
+ \item Given choices and parenthesization, optional matching can be
+ expressed as a choice between some pattern and nothing. In
+ addition, Yapps 2 has the convenience syntax \verb|[A B ...]| for
+ matching \verb|A B ...| optionally.
+ \item Repetition operators \verb|*| for zero or more and \verb|+| for
+ one or more make it easy to specify repeating patterns.
+\end{enumerate}
+
+It is my hope that Yapps 2 will be flexible enough to meet my needs
+for another year, yet simple enough that I do not hesitate to use it.
+
+\mysection{Future Extensions}
+\label{sec:future}
+
+I am still investigating the possibility of LL(2) and higher
+lookahead. However, it looks like the resulting parsers will be
+somewhat ugly.
+
+It would be nice to control choices with user-defined predicates.
+
+The most likely future extension is backtracking. A grammar pattern
+like \verb|(VAR ':=' expr)? {{ return Assign(VAR,expr) }} : expr {{ return expr }}|
+would turn into code that attempted to match \verb|VAR ':=' expr|. If
+it succeeded, it would run \verb|{{ return ... }}|. If it failed, it
+would match \verb|expr {{ return expr }}|. Backtracking may make it
+less necessary to write LL(2) grammars.
+
+\mysection{References}
+
+\begin{enumerate}
+ \item The \htmladdnormallink{Python-Parser
+ SIG}{http://www.python.org/sigs/parser-sig/} is the first place
+ to look for a list of parser systems for Python.
+
+ \item ANTLR/PCCTS, by Terrence Parr, is available at
+ \htmladdnormallink{The ANTLR Home Page}{http://www.antlr.org/}.
+
+ \item PyLR, by Scott Cotton, is at \htmladdnormallink{his Starship
+ page}{http://starship.skyport.net/crew/scott/PyLR.html}.
+
+ \item John Aycock's \htmladdnormallink{Compiling Little Languages
+ Framework}{http://www.csr.UVic.CA/~aycock/python/}.
+
+ \item PyBison, by Scott Hassan, can be found at
+ \htmladdnormallink{his Python Projects
+ page}{http://coho.stanford.edu/\~{}hassan/Python/}.
+
+ \item mcf.pars, by Mike C. Fletcher, is available at
+ \htmladdnormallink{his web
+ page}{http://www.golden.net/\~{}mcfletch/programming/}.
+
+ \item kwParsing, by Aaron Watters, is available at
+ \htmladdnormallink{his Starship
+ page}{http://starship.skyport.net/crew/aaron_watters/kwParsing/}.
+\end{enumerate}
+
+\end{document}
diff --git a/util/sconfig/yappsrt.py b/util/sconfig/yappsrt.py
new file mode 100644
index 0000000..2ce2480
--- /dev/null
+++ b/util/sconfig/yappsrt.py
@@ -0,0 +1,172 @@
+# Yapps 2.0 Runtime
+#
+# This module is needed to run generated parsers.
+
+from string import *
+import exceptions
+import re
+
+class SyntaxError(Exception):
+ """When we run into an unexpected token, this is the exception to use"""
+ def __init__(self, pos=-1, msg="Bad Token"):
+ self.pos = pos
+ self.msg = msg
+ def __repr__(self):
+ if self.pos < 0: return "#<syntax-error>"
+ else: return "SyntaxError[@ char " + `self.pos` + ": " + self.msg + "]"
+
+class NoMoreTokens(Exception):
+ """Another exception object, for when we run out of tokens"""
+ pass
+
+class Scanner:
+ def __init__(self, patterns, ignore, input):
+ """Patterns is [(terminal,regex)...]
+ Ignore is [terminal,...];
+ Input is a string"""
+ self.tokens = []
+ self.restrictions = []
+ self.input = input
+ self.pos = 0
+ self.ignore = ignore
+ # The stored patterns are a pair (compiled regex,source
+ # regex). If the patterns variable passed in to the
+ # constructor is None, we assume that the class already has a
+ # proper .patterns list constructed
+ if patterns is not None:
+ self.patterns = []
+ for k,r in patterns:
+ self.patterns.append( (k, re.compile(r)) )
+
+ def token(self, i, restrict=0):
+ """Get the i'th token, and if i is one past the end, then scan
+ for another token; restrict is a list of tokens that
+ are allowed, or 0 for any token."""
+ if i == len(self.tokens): self.scan(restrict)
+ if i < len(self.tokens):
+ # Make sure the restriction is more restricted
+ if restrict and self.restrictions[i]:
+ for r in restrict:
+ if r not in self.restrictions[i]:
+ raise "Unimplemented: restriction set changed"
+ return self.tokens[i]
+ raise NoMoreTokens()
+
+ def __repr__(self):
+ """Print the last 10 tokens that have been scanned in"""
+ output = ''
+ for t in self.tokens[-10:]:
+ output = '%s\n (@%s) %s = %s' % (output,t[0],t[2],`t[3]`)
+ return output
+
+ def scan(self, restrict):
+ """Should scan another token and add it to the list, self.tokens,
+ and add the restriction to self.restrictions"""
+ # Keep looking for a token, ignoring any in self.ignore
+ while 1:
+ # Search the patterns for the longest match, with earlier
+ # tokens in the list having preference
+ best_match = -1
+ best_pat = '(error)'
+ for p, regexp in self.patterns:
+ # First check to see if we're ignoring this token
+ if restrict and p not in restrict and p not in self.ignore:
+ continue
+ m = regexp.match(self.input, self.pos)
+ if m and len(m.group(0)) > best_match:
+ # We got a match that's better than the previous one
+ best_pat = p
+ best_match = len(m.group(0))
+
+ # If we didn't find anything, raise an error
+ if best_pat == '(error)' and best_match < 0:
+ msg = "Bad Token"
+ if restrict:
+ msg = "Trying to find one of "+join(restrict,", ")
+ raise SyntaxError(self.pos, msg)
+
+ # If we found something that isn't to be ignored, return it
+ if best_pat not in self.ignore:
+ # Create a token with this data
+ token = (self.pos, self.pos+best_match, best_pat,
+ self.input[self.pos:self.pos+best_match])
+ self.pos = self.pos + best_match
+ # Only add this token if it's not in the list
+ # (to prevent looping)
+ if not self.tokens or token != self.tokens[-1]:
+ self.tokens.append(token)
+ self.restrictions.append(restrict)
+ return
+ else:
+ # This token should be ignored ..
+ self.pos = self.pos + best_match
+
+class Parser:
+ def __init__(self, scanner):
+ self._scanner = scanner
+ self._pos = 0
+
+ def _peek(self, *types):
+ """Returns the token type for lookahead; if there are any args
+ then the list of args is the set of token types to allow"""
+ tok = self._scanner.token(self._pos, types)
+ return tok[2]
+
+ def _scan(self, type):
+ """Returns the matched text, and moves to the next token"""
+ tok = self._scanner.token(self._pos, [type])
+ if tok[2] != type:
+ raise SyntaxError(tok[0], 'Trying to find '+type)
+ self._pos = 1+self._pos
+ return tok[3]
+
+
+
+def print_error(input, err, scanner):
+ """This is a really dumb long function to print error messages nicely."""
+ p = err.pos
+ # Figure out the line number
+ line = count(input[:p], '\n')
+ print err.msg+" on line "+`line+1`+":"
+ # Now try printing part of the line
+ text = input[max(p-80,0):p+80]
+ p = p - max(p-80,0)
+
+ # Strip to the left
+ i = rfind(text[:p],'\n')
+ j = rfind(text[:p],'\r')
+ if i < 0 or (j < i and j >= 0): i = j
+ if i >= 0 and i < p:
+ p = p - i - 1
+ text = text[i+1:]
+
+ # Strip to the right
+ i = find(text,'\n',p)
+ j = find(text,'\r',p)
+ if i < 0 or (j < i and j >= 0): i = j
+ if i >= 0:
+ text = text[:i]
+
+ # Now shorten the text
+ while len(text) > 70 and p > 60:
+ # Cut off 10 chars
+ text = "..." + text[10:]
+ p = p - 7
+
+ # Now print the string, along with an indicator
+ print '> ',text
+ print '> ',' '*p + '^'
+ print 'List of nearby tokens:', scanner
+
+def wrap_error_reporter(parser, rule):
+ try: return getattr(parser, rule)()
+ except SyntaxError, s:
+ input = parser._scanner.input
+ try:
+ print_error(input, s, parser._scanner)
+ except ImportError:
+ print 'Syntax Error',s.msg,'on line',1+count(input[:s.pos], '\n')
+ except NoMoreTokens:
+ print 'Could not complete parsing; stopped around here:'
+ print parser._scanner
+
diff --git a/util/x86emu/Makefile.inc b/util/x86emu/Makefile.inc
new file mode 100644
index 0000000..ec90694
--- /dev/null
+++ b/util/x86emu/Makefile.inc
@@ -0,0 +1,27 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+subdir-$(CONFIG_PCI_OPTION_ROM_RUN_X86EMU) += x86emu
+obj-$(CONFIG_PCI_OPTION_ROM_RUN_X86EMU) += biosemu.c
+subdir-$(CONFIG_PCI_OPTION_ROM_RUN_X86EMU) += pcbios
+
+obj-$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) += x86.o
+obj-$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) += x86_asm.o
+obj-$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) += x86_interrupts.o
diff --git a/util/x86emu/pcbios/Makefile.inc b/util/x86emu/pcbios/Makefile.inc
new file mode 100644
index 0000000..35d2d97
--- /dev/null
+++ b/util/x86emu/pcbios/Makefile.inc
@@ -0,0 +1 @@
+obj-y += pcibios.o
diff --git a/util/x86emu/x86emu/Makefile.inc b/util/x86emu/x86emu/Makefile.inc
new file mode 100644
index 0000000..3a5e8fb
--- /dev/null
+++ b/util/x86emu/x86emu/Makefile.inc
@@ -0,0 +1,7 @@
+obj-y += debug.o
+obj-y += decode.o
+obj-y += fpu.o
+obj-y += ops.o
+obj-y += ops2.o
+obj-y += prim_ops.o
+obj-y += sys.o
diff --git a/util/xcompile/xcompile b/util/xcompile/xcompile
new file mode 100644
index 0000000..d3990cf
--- /dev/null
+++ b/util/xcompile/xcompile
@@ -0,0 +1,45 @@
+
+for make in make gmake gnumake; do
+ if [ "`$make --version 2>/dev/null | grep -c GNU`" -gt 0 ]; then
+ MAKE=$make
+ break
+ fi
+done
+
+GCCPREFIX=invalid
+TMP=`mktemp /tmp/temp.XXXX`
+echo "mov %eax, %eax" > ${TMP}.s
+printf "\x7fELF" > ${TMP}.compare
+for gccprefixes in `pwd`/../crossgcc/xgcc/bin/i386-elf- i386-elf- ""; do
+ if which ${gccprefixes}as 2>/dev/null >/dev/null; then
+ printf ""
+ else
+ continue
+ fi
+ rm -f ${TMP}.o
+ if ${gccprefixes}as --32 -o ${TMP}.o ${TMP}.s; then
+ dd bs=4 count=1 if=${TMP}.o > ${TMP}.test 2>/dev/null
+ if cmp ${TMP}.test ${TMP}.compare; then
+ GCCPREFIX=$gccprefixes
+ break
+ fi
+ fi
+done
+rm -f $TMP ${TMP}.s ${TMP}.o ${TMP}.compare ${TMP}.test
+
+if [ "$GCCPREFIX" = "invalid" ]; then
+ echo '$(error no suitable gcc found)'
+ exit 1
+fi
+
+cat << afteroptions
+AS:=${GCCPREFIX}as --32
+CC:=${GCCPREFIX}gcc -m32
+AR:=${GCCPREFIX}ar
+LD:=${GCCPREFIX}ld -b elf32-i386
+STRIP:=${GCCPREFIX}strip
+NM:=${GCCPREFIX}nm
+OBJCOPY:=${GCCPREFIX}objcopy
+OBJDUMP:=${GCCPREFIX}objdump
+HOSTCC:=gcc
+afteroptions