Kconfig!
Works on Kontron, qemu, and serengeti.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
tested on abuild only.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb b/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb
new file mode 100644
index 0000000..59a4875
--- /dev/null
+++ b/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb
@@ -0,0 +1,76 @@
+chip northbridge/amd/lx
+ device pci_domain 0 on
+ device pci 1.0 on end # Northbridge
+ device pci 1.1 on end # Graphics
+ chip southbridge/amd/cs5536
+ # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
+ # SIRQ Mode = Active(Quiet) mode. Save power....
+ # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK
+ register "lpc_serirq_enable" = "0x0000105a"
+ register "lpc_serirq_polarity" = "0x0000EFA5"
+ register "lpc_serirq_mode" = "1"
+ register "enable_gpio_int_route" = "0x0D0C0700"
+ register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
+ register "enable_USBP4_device" = "1" # 0: host, 1:device
+ register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
+ register "com1_enable" = "0"
+ register "com1_address" = "0x3F8"
+ register "com1_irq" = "4"
+ register "com2_enable" = "0"
+ register "com2_address" = "0x2F8"
+ register "com2_irq" = "3"
+ register "unwanted_vpci[0]" = "0" # End of list has a zero
+ device pci 9.0 on end # Slot1
+ device pci a.0 on end # Slot2
+ device pci b.0 on end # Slot3
+ device pci c.0 on end # Slot4
+ device pci e.0 on end # Ethernet 0
+ device pci 10.0 on end # Ethernet 1
+ device pci 11.0 on end # SATA
+ device pci f.0 on # ISA Bridge
+ chip superio/winbond/w83627hf
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 off # Parallel port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off end # CIR
+ device pnp 2e.7 off end # GAME_MIDI_GIPO1
+ device pnp 2e.8 off end # GPIO2
+ device pnp 2e.9 off end # GPIO3
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b off end # HW Monitor
+ end
+ end
+ device pci f.2 on end # IDE Controller
+ device pci f.3 on end # Audio
+ device pci f.4 on end # OHCI
+ device pci f.5 on end # EHCI
+ end
+ end
+ # APIC cluster is late CPU init.
+ device apic_cluster 0 on
+ chip cpu/amd/model_lx
+ device apic 0 on end
+ end
+ end
+end
+