Following patch adds support for Asus M2V-E SE. Works pretty well, the only
problem left is with CPU scaling setup. No VGA - may work with the Xorg drivers
recently released, maybe with OpenChrome too.
It wont work with the little patch which will hop in soon
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3591 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/asus/m2v-mx_se/acpi_tables.c b/src/mainboard/asus/m2v-mx_se/acpi_tables.c
new file mode 100644
index 0000000..86fee0c
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/acpi_tables.c
@@ -0,0 +1,163 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Written by Stefan Reinauer <stepan@openbios.org>.
+ * ACPI FADT, FACS, and DSDT table support added by
+ *
+ * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org>
+ * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com>
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci_ids.h>
+#include <../../../southbridge/via/vt8237r/vt8237r.h>
+#include <../../../southbridge/via/k8t890/k8t890.h>
+
+extern unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ device_t dev;
+ struct resource *res;
+
+ dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T890CE_5, 0);
+ if (!dev)
+ return current;
+
+ res = find_resource(dev, K8T890_MMCONFIG_MBAR);
+ if (res) {
+ current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)
+ current, res->base, 0x0, 0x0, 0xff);
+ }
+ return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ unsigned int gsi_base = 0x18;
+
+ /* Create all subtables for processors. */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB IOAPIC. */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ VT8237R_APIC_ID, VT8237R_APIC_BASE, 0);
+
+ /* Write NB IOAPIC. */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base);
+
+ /* IRQ9 ACPI active low. */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
+
+ /* IRQ0 -> APIC IRQ2. */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0x0);
+
+ /* Create all subtables for processors. */
+ current = acpi_create_madt_lapic_nmis(current,
+ MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1);
+
+ return current;
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_srat_t *srat;
+ acpi_rsdt_t *rsdt;
+ acpi_mcfg_t *mcfg;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_header_t *dsdt;
+
+ /* Align ACPI tables to 16 byte. */
+ start = (start + 0x0f) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT table. */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* Clear all table memory. */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt);
+ acpi_write_rsdt(rsdt);
+
+ /* We explicitly add these tables later on: */
+ printk_debug("ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ dsdt = (acpi_header_t *) current;
+ current += ((acpi_header_t *) AmlCode)->length;
+ memcpy((void *) dsdt, (void *) AmlCode,
+ ((acpi_header_t *) AmlCode)->length);
+ dsdt->checksum = 0; /* Don't trust iasl to get this right. */
+ dsdt->checksum = acpi_checksum(dsdt, dsdt->length);
+ printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt,
+ dsdt->length);
+ printk_debug("ACPI: * FADT\n");
+
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdt, fadt);
+
+ printk_debug("ACPI: * HPET\n");
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdt, hpet);
+
+ /* If we want to use HPET timers Linux wants an MADT. */
+ printk_debug("ACPI: * MADT\n");
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdt, madt);
+
+ printk_debug("ACPI: * MCFG\n");
+ mcfg = (acpi_mcfg_t *) current;
+ acpi_create_mcfg(mcfg);
+ current += mcfg->header.length;
+ acpi_add_table(rsdt, mcfg);
+
+ printk_debug("ACPI: * SRAT\n");
+ srat = (acpi_srat_t *) current;
+ acpi_create_srat(srat);
+ current += srat->header.length;
+ acpi_add_table(rsdt, srat);
+
+ printk_info("ACPI: done.\n");
+ return current;
+}