src/soc: Get rid of whitespace before tab
Change-Id: Ia024fb418f02d90c38b9a35ff819c607b9ac4965
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
diff --git a/src/soc/intel/apollolake/exit_car_fsp.S b/src/soc/intel/apollolake/exit_car_fsp.S
index 92289a0..fbf2d31 100644
--- a/src/soc/intel/apollolake/exit_car_fsp.S
+++ b/src/soc/intel/apollolake/exit_car_fsp.S
@@ -28,11 +28,11 @@
* caching settings are based on an 8MiB Flash Size given as a
* parameter to TempRamInit.
*
- * TempRamExit MTRR Settings:
- * 0x00000000 - 0x0009FFFF | Write Back
- * 0x000C0000 - Top of Low Memory | Write Back
- * 0xFF800000 - 0xFFFFFFFF Flash Reg | Write Protect
- * 0x100000000 - Top of High Memory | Write Back
+ * TempRamExit MTRR Settings:
+ * 0x00000000 - 0x0009FFFF | Write Back
+ * 0x000C0000 - Top of Low Memory | Write Back
+ * 0xFF800000 - 0xFFFFFFFF Flash Reg | Write Protect
+ * 0x100000000 - Top of High Memory | Write Back
*/
.text
diff --git a/src/soc/intel/baytrail/include/soc/gpio.h b/src/soc/intel/baytrail/include/soc/gpio.h
index 580c4eb..93e80cb 100644
--- a/src/soc/intel/baytrail/include/soc/gpio.h
+++ b/src/soc/intel/baytrail/include/soc/gpio.h
@@ -58,8 +58,8 @@
#define GPSSUS_COUNT 44
/* GPIO legacy IO register settings */
-#define GPIO_USE_MMIO 0
-#define GPIO_USE_LEGACY 1
+#define GPIO_USE_MMIO 0
+#define GPIO_USE_LEGACY 1
#define GPIO_DIR_OUTPUT 0
#define GPIO_DIR_INPUT 1
@@ -317,12 +317,12 @@
{ .pad_conf0 = GPIO_LIST_END }
/* Common default GPIO settings */
-#define GPIO_INPUT GPIO_INPUT_NOPU
+#define GPIO_INPUT GPIO_INPUT_NOPU
#define GPIO_INPUT_LEGACY GPIO_INPUT_LEGACY_NOPU
#define GPIO_INPUT_PU GPIO_INPUT_PU_20K
-#define GPIO_INPUT_PD GPIO_INPUT_PD_20K
+#define GPIO_INPUT_PD GPIO_INPUT_PD_20K
#define GPIO_NC GPIO_OUT_HIGH
-#define GPIO_DEFAULT GPIO_FUNC0
+#define GPIO_DEFAULT GPIO_FUNC0
/* 16 DirectIRQs per supported bank */
#define GPIO_MAX_DIRQS 16
diff --git a/src/soc/intel/baytrail/include/soc/msr.h b/src/soc/intel/baytrail/include/soc/msr.h
index e735f01..689d4d5 100644
--- a/src/soc/intel/baytrail/include/soc/msr.h
+++ b/src/soc/intel/baytrail/include/soc/msr.h
@@ -20,10 +20,10 @@
#define MSR_BSEL_CR_OVERCLOCK_CONTROL 0xcd
#define MSR_PLATFORM_INFO 0xce
#define MSR_PMG_CST_CONFIG_CONTROL 0xe2
-#define SINGLE_PCTL (1 << 11)
+#define SINGLE_PCTL (1 << 11)
#define MSR_POWER_MISC 0x120
-#define ENABLE_ULFM_AUTOCM_MASK (1 << 2)
-#define ENABLE_INDP_AUTOCM_MASK (1 << 3)
+#define ENABLE_ULFM_AUTOCM_MASK (1 << 2)
+#define ENABLE_INDP_AUTOCM_MASK (1 << 3)
#define MSR_IA32_PERF_CTL 0x199
#define MSR_IA32_MISC_ENABLES 0x1a0
#define MSR_POWER_CTL 0x1fc
diff --git a/src/soc/intel/baytrail/include/soc/xhci.h b/src/soc/intel/baytrail/include/soc/xhci.h
index ec643c1..d509b51 100644
--- a/src/soc/intel/baytrail/include/soc/xhci.h
+++ b/src/soc/intel/baytrail/include/soc/xhci.h
@@ -33,7 +33,7 @@
# define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */
# define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */
# define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */
-# define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */
+# define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */
# define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */
# define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */
# define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */
diff --git a/src/soc/intel/baytrail/romstage/early_spi.c b/src/soc/intel/baytrail/romstage/early_spi.c
index 61e95fa..e1e7542 100644
--- a/src/soc/intel/baytrail/romstage/early_spi.c
+++ b/src/soc/intel/baytrail/romstage/early_spi.c
@@ -22,7 +22,7 @@
#include <soc/romstage.h>
#include <soc/spi.h>
-#define SPI_CYCLE_DELAY 10 /* 10us */
+#define SPI_CYCLE_DELAY 10 /* 10us */
#define SPI_CYCLE_TIMEOUT 400000 / SPI_CYCLE_DELAY /* 400ms */
#define SPI8(x) *((volatile u8 *)(SPI_BASE_ADDRESS + x))
diff --git a/src/soc/intel/broadwell/acpi/pch.asl b/src/soc/intel/broadwell/acpi/pch.asl
index 76804f8..ef0eaba 100644
--- a/src/soc/intel/broadwell/acpi/pch.asl
+++ b/src/soc/intel/broadwell/acpi/pch.asl
@@ -31,7 +31,7 @@
Field (RCRB, DWordAcc, Lock, Preserve)
{
Offset (0x3404), // High Performance Timer Configuration
- HPAS, 2, // Address Select
+ HPAS, 2, // Address Select
, 5,
HPTE, 1, // Address Enable
}
diff --git a/src/soc/intel/broadwell/acpi/pci_irqs.asl b/src/soc/intel/broadwell/acpi/pci_irqs.asl
index 6565334..44263ea 100644
--- a/src/soc/intel/broadwell/acpi/pci_irqs.asl
+++ b/src/soc/intel/broadwell/acpi/pci_irqs.asl
@@ -29,11 +29,11 @@
Package() { 0x001cffff, 1, 0, 17 },
Package() { 0x001cffff, 2, 0, 18 },
Package() { 0x001cffff, 3, 0, 19 },
- // EHCI 0:1d.0
+ // EHCI 0:1d.0
Package() { 0x001dffff, 0, 0, 19 },
// Audio DSP (Smart Sound) 0:13.0
Package() { 0x0013ffff, 0, 0, 23 },
- // XHCI 0:14.0
+ // XHCI 0:14.0
Package() { 0x0014ffff, 0, 0, 18 },
// LPC devices 0:1f.0
Package() { 0x001fffff, 0, 0, 22 },
@@ -61,11 +61,11 @@
Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 },
- // EHCI 0:1d.0
+ // EHCI 0:1d.0
Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 },
// Audio DSP (Smart Sound) 0:13.0
Package() { 0x0013ffff, 0, \_SB.PCI0.LPCB.LNKH, 0 },
- // XHCI 0:14.0
+ // XHCI 0:14.0
Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
// LPC device 0:1f.0
Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
diff --git a/src/soc/intel/cannonlake/include/soc/pmc.h b/src/soc/intel/cannonlake/include/soc/pmc.h
index b794ede..90cd370 100644
--- a/src/soc/intel/cannonlake/include/soc/pmc.h
+++ b/src/soc/intel/cannonlake/include/soc/pmc.h
@@ -39,7 +39,7 @@
#define SUS_PWR_FLR (1 << 16)
#define PME_B0_S5_DIS (1 << 15)
#define PWR_FLR (1 << 14)
-#define ALLOW_L1LOW_BCLKREQ_ON (1 << 13)
+#define ALLOW_L1LOW_BCLKREQ_ON (1 << 13)
#define DIS_SLP_X_STRCH_SUS_UP (1 << 12)
#define SLP_S3_MIN_ASST_WDTH_MASK (3 << 10)
#define SLP_S3_MIN_ASST_WDTH_60USEC (0 << 10)
diff --git a/src/soc/intel/cannonlake/reset.c b/src/soc/intel/cannonlake/reset.c
index 512fbbe..26f0a63 100644
--- a/src/soc/intel/cannonlake/reset.c
+++ b/src/soc/intel/cannonlake/reset.c
@@ -69,7 +69,7 @@
reply_size = sizeof(reply);
memset(&reply, 0, reply_size);
if (!heci_receive(&reply, &reply_size))
- return -1;
+ return -1;
if (reply.result != MKHI_STATUS_SUCCESS) {
printk(BIOS_DEBUG, "Returned Mkhi Status is not success!\n");
return -1;
diff --git a/src/soc/intel/common/block/cpu/car/cache_as_ram.S b/src/soc/intel/common/block/cpu/car/cache_as_ram.S
index 02aeefe..684f827 100644
--- a/src/soc/intel/common/block/cpu/car/cache_as_ram.S
+++ b/src/soc/intel/common/block/cpu/car/cache_as_ram.S
@@ -94,7 +94,7 @@
* MTRR_PHYS_MASK_HIGH = 0000000FFh For 40 bit addressing
*/
- movl $0x80000008, %eax /* Address sizes leaf */
+ movl $0x80000008, %eax /* Address sizes leaf */
cpuid
sub $32, %al
movzx %al, %eax
@@ -193,7 +193,7 @@
movd %mm2, %eax
pushl %eax /* tsc[63:32] */
movd %mm1, %eax
- pushl %eax /* tsc[31:0] */
+ pushl %eax /* tsc[31:0] */
before_carstage:
post_code(0x2A)
diff --git a/src/soc/intel/common/block/fast_spi/fast_spi_def.h b/src/soc/intel/common/block/fast_spi/fast_spi_def.h
index a389e34..2ae56df 100644
--- a/src/soc/intel/common/block/fast_spi/fast_spi_def.h
+++ b/src/soc/intel/common/block/fast_spi/fast_spi_def.h
@@ -22,7 +22,7 @@
#define SPIBAR_BIOS_CONTROL 0xdc
/* Bit definitions for BIOS_CONTROL */
-#define SPIBAR_BIOS_CONTROL_WPD (1 << 0)
+#define SPIBAR_BIOS_CONTROL_WPD (1 << 0)
#define SPIBAR_BIOS_CONTROL_LOCK_ENABLE (1 << 1)
#define SPIBAR_BIOS_CONTROL_CACHE_DISABLE (1 << 2)
#define SPIBAR_BIOS_CONTROL_PREFETCH_ENABLE (1 << 3)
@@ -113,21 +113,21 @@
#define SPIBAR_FPR_MAX 5
/* Programmable values for OPMENU_LOWER(0xA8) & OPMENU_UPPER(0xAC) register */
-#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */
-#define SPI_OPTYPE_0 0x01 /* Write, no address */
-#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */
-#define SPI_OPTYPE_1 0x03 /* Write, address required */
-#define SPI_OPMENU_2 0x03 /* READ: Read Data */
-#define SPI_OPTYPE_2 0x02 /* Read, address required */
-#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */
-#define SPI_OPTYPE_3 0x00 /* Read, no address */
-#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */
-#define SPI_OPTYPE_4 0x03 /* Write, address required */
-#define SPI_OPMENU_5 0x9f /* RDID: Read ID */
-#define SPI_OPTYPE_5 0x00 /* Read, no address */
-#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */
-#define SPI_OPTYPE_6 0x03 /* Write, address required */
-#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */
+#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */
+#define SPI_OPTYPE_0 0x01 /* Write, no address */
+#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */
+#define SPI_OPTYPE_1 0x03 /* Write, address required */
+#define SPI_OPMENU_2 0x03 /* READ: Read Data */
+#define SPI_OPTYPE_2 0x02 /* Read, address required */
+#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */
+#define SPI_OPTYPE_3 0x00 /* Read, no address */
+#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */
+#define SPI_OPTYPE_4 0x03 /* Write, address required */
+#define SPI_OPMENU_5 0x9f /* RDID: Read ID */
+#define SPI_OPTYPE_5 0x00 /* Read, no address */
+#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */
+#define SPI_OPTYPE_6 0x03 /* Write, address required */
+#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */
#define SPI_OPTYPE_7 0x02 /* Read, address required */
#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \
(SPI_OPMENU_5 << 8) | SPI_OPMENU_4)
diff --git a/src/soc/intel/common/block/scs/sd.c b/src/soc/intel/common/block/scs/sd.c
index 66eaddf5..811d273 100644
--- a/src/soc/intel/common/block/scs/sd.c
+++ b/src/soc/intel/common/block/scs/sd.c
@@ -57,7 +57,7 @@
static struct device_operations dev_ops = {
.read_resources = &pci_dev_read_resources,
.set_resources = &pci_dev_set_resources,
- .enable_resources = &pci_dev_enable_resources,
+ .enable_resources = &pci_dev_enable_resources,
#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
.acpi_fill_ssdt_generator = &sd_fill_ssdt,
#endif
diff --git a/src/soc/intel/denverton_ns/acpi/lpc.asl b/src/soc/intel/denverton_ns/acpi/lpc.asl
index 262ac55..3167c18 100644
--- a/src/soc/intel/denverton_ns/acpi/lpc.asl
+++ b/src/soc/intel/denverton_ns/acpi/lpc.asl
@@ -177,7 +177,7 @@
Name(BUF0,ResourceTemplate()
{
IO(Decode16,0x02F8,0x02F8,0x01,0x08)
- Interrupt (ResourceConsumer, Level, ActiveLow, Shared) {17}
+ Interrupt (ResourceConsumer, Level, ActiveLow, Shared) {17}
})
Return(BUF0)
}
diff --git a/src/soc/intel/denverton_ns/exit_car_fsp.S b/src/soc/intel/denverton_ns/exit_car_fsp.S
index 2ec625b..83d5a33 100644
--- a/src/soc/intel/denverton_ns/exit_car_fsp.S
+++ b/src/soc/intel/denverton_ns/exit_car_fsp.S
@@ -29,11 +29,11 @@
* caching settings are based on an 8MiB Flash Size given as a
* parameter to TempRamInit.
*
- * TempRamExit MTRR Settings:
- * 0x00000000 - 0x0009FFFF | Write Back
- * 0x000C0000 - Top of Low Memory | Write Back
- * 0xFF800000 - 0xFFFFFFFF Flash Reg | Write Protect
- * 0x100000000 - Top of High Memory | Write Back
+ * TempRamExit MTRR Settings:
+ * 0x00000000 - 0x0009FFFF | Write Back
+ * 0x000C0000 - Top of Low Memory | Write Back
+ * 0xFF800000 - 0xFFFFFFFF Flash Reg | Write Protect
+ * 0x100000000 - Top of High Memory | Write Back
*/
.text
diff --git a/src/soc/intel/fsp_baytrail/include/soc/gpio.h b/src/soc/intel/fsp_baytrail/include/soc/gpio.h
index 7c81151..7677554 100644
--- a/src/soc/intel/fsp_baytrail/include/soc/gpio.h
+++ b/src/soc/intel/fsp_baytrail/include/soc/gpio.h
@@ -56,8 +56,8 @@
#define GPSSUS_COUNT 44
/* GPIO legacy IO register settings */
-#define GPIO_USE_MMIO 0
-#define GPIO_USE_LEGACY 1
+#define GPIO_USE_MMIO 0
+#define GPIO_USE_LEGACY 1
#define GPIO_DIR_OUTPUT 0
#define GPIO_DIR_INPUT 1
@@ -291,12 +291,12 @@
{ .pad_conf0 = GPIO_LIST_END }
/* Common default GPIO settings */
-#define GPIO_INPUT GPIO_INPUT_NOPU
+#define GPIO_INPUT GPIO_INPUT_NOPU
#define GPIO_INPUT_LEGACY GPIO_INPUT_LEGACY_NOPU
#define GPIO_INPUT_PU GPIO_INPUT_PU_20K
-#define GPIO_INPUT_PD GPIO_INPUT_PD_20K
+#define GPIO_INPUT_PD GPIO_INPUT_PD_20K
#define GPIO_NC GPIO_INPUT_PU_20K
-#define GPIO_DEFAULT GPIO_FUNC0
+#define GPIO_DEFAULT GPIO_FUNC0
/* 16 DirectIRQs per supported bank */
#define GPIO_MAX_DIRQS 16
diff --git a/src/soc/intel/fsp_baytrail/include/soc/xhci.h b/src/soc/intel/fsp_baytrail/include/soc/xhci.h
index ec643c1..d509b51 100644
--- a/src/soc/intel/fsp_baytrail/include/soc/xhci.h
+++ b/src/soc/intel/fsp_baytrail/include/soc/xhci.h
@@ -33,7 +33,7 @@
# define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */
# define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */
# define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */
-# define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */
+# define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */
# define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */
# define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */
# define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */
diff --git a/src/soc/intel/skylake/lockdown.c b/src/soc/intel/skylake/lockdown.c
index 1abe9cb..600be27 100644
--- a/src/soc/intel/skylake/lockdown.c
+++ b/src/soc/intel/skylake/lockdown.c
@@ -25,7 +25,7 @@
#include <string.h>
#define PCR_DMI_GCS 0x274C
-#define PCR_DMI_GCS_BILD (1 << 0)
+#define PCR_DMI_GCS_BILD (1 << 0)
static void lpc_lockdown_config(const struct soc_intel_skylake_config *config)
{
@@ -56,9 +56,9 @@
* When set, prevents GCS.BBS from being changed
* GCS.BBS: (Boot BIOS Strap) This field determines the destination
* of accesses to the BIOS memory range.
- * Bits Description
- * "0b": SPI
- * "1b": LPC/eSPI
+ * Bits Description
+ * "0b": SPI
+ * "1b": LPC/eSPI
*/
pcr_or8(PID_DMI, PCR_DMI_GCS, PCR_DMI_GCS_BILD);
}