driver/intel/mipi_camera: Add support for _DSC field
The _DSC (Device State for Configuration) object evaluates to an integer
may be used to tell Linux the highest allowed D state for a device
during probe. The support for _DSC requires support from the kernel
bus type if the bus driver normally sets the device in D0 state for
probe.
The D states and thus also the allowed values for _DSC are listed below.
Number State Description
0 D0 Device fully powered on
1 D1
2 D2
3 D3hot
4 D3cold Off
More details can be found here https://lkml.org/lkml/2021/10/25/397
BUG=none
BRANCH=none
TEST=Add corresponding field in brya, boot and dump SSDT to check if
_DSC field is as per expectation.
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "OVTI8856") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Name (_DDN, "Ov 8856 Camera") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Method (_DSC, 0, NotSerialized)
{
Return (0x04)
}
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I5471f144918413a2982f86beaf3dbf7e4e66cc9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
diff --git a/src/drivers/intel/mipi_camera/camera.c b/src/drivers/intel/mipi_camera/camera.c
index ec79e39..a9af25c 100644
--- a/src/drivers/intel/mipi_camera/camera.c
+++ b/src/drivers/intel/mipi_camera/camera.c
@@ -847,6 +847,9 @@
acpigen_write_name_integer("_UID", config->acpi_uid);
acpigen_write_name_string("_DDN", config->chip_name);
acpigen_write_STA(acpi_device_status(dev));
+ acpigen_write_method("_DSC", 0);
+ acpigen_write_return_integer(config->max_dstate_for_probe);
+ acpigen_pop_len(); /* Method _DSC */
/* Resources */
acpigen_write_name("_CRS");