epia-m support
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1655 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/southbridge/ricoh/rl5c476/Config.lb b/src/southbridge/ricoh/rl5c476/Config.lb
new file mode 100644
index 0000000..05c7739
--- /dev/null
+++ b/src/southbridge/ricoh/rl5c476/Config.lb
@@ -0,0 +1,2 @@
+config chip.h
+object rl5c476.o
diff --git a/src/southbridge/ricoh/rl5c476/chip.h b/src/southbridge/ricoh/rl5c476/chip.h
new file mode 100644
index 0000000..d951a8a
--- /dev/null
+++ b/src/southbridge/ricoh/rl5c476/chip.h
@@ -0,0 +1,10 @@
+#ifndef _SOUTHBRIDGE_RICOH_RL5C476
+#define _SOUTHBRIDGE_RICOH_RL5C476
+
+extern struct chip_control southbridge_ricoh_rl5c476_control;
+
+struct southbridge_ricoh_rl5c476_config {
+ int num;
+};
+
+#endif /* _SOUTHBRIDGE_RL5C476 */
diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.c b/src/southbridge/ricoh/rl5c476/rl5c476.c
new file mode 100644
index 0000000..c6cb55c
--- /dev/null
+++ b/src/southbridge/ricoh/rl5c476/rl5c476.c
@@ -0,0 +1,255 @@
+/*
+ * (C) Copyright 2004 Nick Barker <nick.barker9@btinternet.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <device/pci_ids.h>
+#include <device/chip.h>
+#include <console/console.h>
+#include "rl5c476.h"
+#include "chip.h"
+
+static void udelay(int i){
+ for(; i > 0 ; i--)
+ inb(0x80);
+
+}
+
+static void
+dump_south(void)
+{
+ device_t dev0;
+ dev0 = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, 0);
+ dev0 = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, dev0);
+ int i,j;
+
+ for(i = 0; i < 256; i += 16) {
+ printk_debug("0x%x: ", i);
+ for(j = 0; j < 16; j++) {
+ printk_debug("%02x ", pci_read_config8(dev0, i+j));
+ }
+ printk_debug("\n");
+ }
+ printk_debug("Card32\n");
+ for(i = 0 ; i < 256 ; i+=16){
+ printk_debug("0x%x: ",i);
+ for(j = 0 ; j < 16 ; j++){
+ printk_debug(" %02x",*(unsigned char *)(0x80000000+i+j));
+ }
+ printk_debug("\n");
+ }
+ printk_debug("Card16\n");
+ for(i = 0; i < 256; i += 16) {
+ printk_debug("0x%x: ", i);
+ for(j = 0; j < 16; j++) {
+ printk_debug("%02x ", *(unsigned char *)(0x80000800+ i+j));
+ }
+ printk_debug("\n");
+ }
+ printk_debug("CF Config\n");
+ for(i = 0 ; i < 256 ; i+=16){
+ printk_debug("0x%x: ",i);
+ for(j=0 ; j < 16 ; j++){
+ printk_debug("%02x ",*(unsigned char *)(0x81000200 + i + j));
+ }
+ printk_debug("\n");
+ }
+}
+
+
+static void rl5c476_init(struct southbridge_rl5c476_config *conf)
+{
+ //unsigned char enables;
+ device_t dev;
+ pc16reg_t *pc16;
+ int i;
+
+ printk_debug("rl5c476 init\n");
+ /* cardbus controller function 1 for CF Socket */
+ dev = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, 0);
+
+ if (!dev ){
+ // probably an epia-m rather than mii
+ printk_debug("No rl5c476 found\n");
+ return;
+ }
+
+ /* setup pci header manually because 'pci_device.c' doesn't know how to handle
+ * pci to cardbus bridges - (header type 2 I think)
+ */
+
+
+ /* initialize function zero - pcmcia socket so it behaves itself */
+ /* FIXME - statically put control memory at 0xe0000000 for now
+ * one day the pci_device allocator might do this */
+ pci_write_config32(dev,0x10,0xe0000000);
+ pci_write_config8(dev,0x0d,0x20);
+ pci_write_config8(dev,0x19,0x02);
+ pci_write_config8(dev,0x1a,0x02);
+ pci_write_config8(dev,0x1b,0x20);
+ //pci_write_config8(dev,0x3c,0);
+ pci_write_config8(dev,0x82,0x00a0);
+ pci_write_config16(dev,0x04,0x07);
+
+
+ /* get second function - i.e. compact flash socket */
+ dev = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, dev);
+
+
+ /* FIXME - control structure statically declared at 0xe0008000 for now */
+ pci_write_config32(dev,0x10,0xe0008000);
+ pci_write_config8(dev,0x0d,0x20);
+ pci_write_config8(dev,0x19,0x03);
+ pci_write_config8(dev,0x1a,0x03);
+ pci_write_config8(dev,0x1b,0x20);
+
+ //pci_write_config8(dev,0x3c,0x0);
+ pci_write_config16(dev,0x3e,0x0780);
+ pci_write_config16(dev,0x82,0x00a0);
+
+ pci_write_config16(dev,0x04,0x07);
+
+
+ /* pick up where 16 bit card control structure is */
+ pc16 = (pc16reg_t *)(0xe0008800);
+
+ /* disable memory and io windows and turn off socket power */
+ pc16->pwctrl = 0;
+
+ /* disable irq lines */
+ pc16->igctrl = 0;
+
+ /* disable memory and I/O windows */
+ pc16->awinen = 0;
+
+ /* reset card, configure for I/O and set IRQ line */
+ pc16->igctrl = 0x69;
+
+
+ // set io window 0 for 1e8 - 1ef
+ pc16->iostl0 = 0xe8;
+ pc16->iosth0 = 1;
+
+ pc16->iospl0 = 0xef;
+ pc16->iosph0 = 1;
+
+ // add io offset of 8 so that CF card will decode 0x1e8 as 0x1f0 i.e. the first byte of
+ // a 16 byte aligned, 16 byte window etc
+ pc16->ioffl0 = 0x8;
+ pc16->ioffh0 = 0;
+
+ // set io window 1 for 3ed - 3ee
+ pc16->iostl1 = 0xed;
+ pc16->iosth1 = 3;
+
+ pc16->iospl1 = 0xee;
+ pc16->iosph1 = 3;
+
+ pc16->ioffl1 = 0x0;
+ pc16->ioffh1 = 0;
+
+
+ // FIXME statically declare CF config window at 0xe1000000
+ pc16->smstl0 = 0;
+ pc16->smsth0 = 0;
+ pc16->smspl0 = 0;
+ pc16->smsph0 = 0x80;
+ pc16->moffl0 = 0;
+ pc16->moffh0 = 0x40;
+ pc16->smpga0 = 0xe1;
+
+ // set I/O width for Auto Data width
+ pc16->ioctrl = 0x22;
+
+
+ // enable I/O window 0 and 1
+ pc16->awinen = 0xc1;
+
+
+ pc16->miscc1 = 1;
+
+ // apply power and enable outputs
+ pc16->pwctrl = 0xb0;
+
+
+ // delay could be optimised, but this works
+ udelay(100000);
+
+ pc16->igctrl = 0x69;
+
+ unsigned char *cptr;
+ cptr = (unsigned char *)(0xe1000200);
+ printk_debug("CF Config = %x\n",*cptr);
+
+ // FIX Me 16 bit CF always have first config byte at 0x200 into Config structure,
+ // but CF+ May Not according to spec - should locate through reading tuple data,
+ // but this will do for now !!!
+
+
+ // set CF to decode 16 IO bytes on any 16 byte boundary - rely on the io
+ // windows of the bridge set up above to map those bytes into the
+ // addresses for ide controller 3 (0x1e8 - 0x1ef and 0x3ed - 0x3ee)
+ *cptr = 0x41;
+
+
+}
+
+static void southbridge_init(struct chip *chip, enum chip_pass pass)
+{
+
+ struct southbridge_rl5c476_config *conf =
+ (struct southbridge_rl5c476_config *)chip->chip_info;
+
+ switch (pass) {
+ case CONF_PASS_PRE_PCI:
+ //rl5c476_pci_enable(conf);
+ break;
+
+ case CONF_PASS_POST_PCI:
+ rl5c476_init(conf);
+
+ break;
+
+ case CONF_PASS_PRE_BOOT:
+ //dump_south();
+ break;
+
+ default:
+ /* nothing yet */
+ break;
+ }
+}
+
+static void enumerate(struct chip *chip)
+{
+ extern struct device_operations default_pci_ops_bus;
+ chip_enumerate(chip);
+ chip->dev->ops = &default_pci_ops_bus;
+}
+
+struct chip_control southbridge_ricoh_rl5c476_control = {
+ .enumerate = enumerate,
+ .enable = southbridge_init,
+ .name = "RICOH RL5C476"
+};
diff --git a/src/southbridge/ricoh/rl5c476/rl5c476.h b/src/southbridge/ricoh/rl5c476/rl5c476.h
new file mode 100644
index 0000000..c2da0de
--- /dev/null
+++ b/src/southbridge/ricoh/rl5c476/rl5c476.h
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2004 Nick Barker <nick.barker9@btinternet.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ /* rl5c476 routines and defines*/
+
+
+typedef unsigned char u8;
+
+
+/* the 16 bit control structure for ricoh cardbus bridge */
+typedef struct pc16reg {
+ u8 idrevs;
+ u8 ifstat;
+ u8 pwctrl;
+ u8 igctrl;
+ u8 cschg;
+ u8 cscint;
+ u8 awinen;
+ u8 ioctrl;
+ u8 iostl0;
+ u8 iosth0;
+ u8 iospl0;
+ u8 iosph0;
+ u8 iostl1;
+ u8 iosth1;
+ u8 iospl1;
+ u8 iosph1;
+ u8 smstl0;
+ u8 smsth0;
+ u8 smspl0;
+ u8 smsph0;
+ u8 moffl0;
+ u8 moffh0;
+ u8 cdgenc;
+ u8 resv1;
+ u8 smstl1;
+ u8 smsth1;
+ u8 smspl1;
+ u8 smsph1;
+ u8 moffl1;
+ u8 moffh1;
+ u8 glctrl;
+ u8 atctrl;
+ u8 smstl2;
+ u8 smsth2;
+ u8 smspl2;
+ u8 smsph2;
+ u8 moffl2;
+ u8 moffh2;
+ u8 resv2;
+ u8 resv3;
+ u8 smstl3;
+ u8 smsth3;
+ u8 smspl3;
+ u8 smsph3;
+ u8 moffl3;
+ u8 moffh3;
+ u8 resv4;
+ u8 miscc1;
+ u8 smstl4;
+ u8 smsth4;
+ u8 smspl4;
+ u8 smsph4;
+ u8 moffl4;
+ u8 moffh4;
+ u8 ioffl0;
+ u8 ioffh0;
+ u8 ioffl1;
+ u8 ioffh1;
+ u8 gpio;
+ u8 resv5;
+ u8 resv6;
+ u8 resv7;
+ u8 resv8;
+ u8 resv9;
+ u8 smpga0;
+} __attribute__ ((packed)) pc16reg_t;
+
+
+
diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c
index ca5ab32..fc4c6a6 100644
--- a/src/southbridge/via/vt8235/vt8235.c
+++ b/src/southbridge/via/vt8235/vt8235.c
@@ -9,6 +9,8 @@
#include "vt8235.h"
#include "chip.h"
+void rtc_init(int i);
+
void pc_keyboard_init(void);
void hard_reset(void)
@@ -23,67 +25,78 @@
/* Base 8235 controller */
device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, 0);
/* USB controller 1 */
- device_t dev2 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, 0);
+ device_t dev1 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, 0);
/* USB controller 2 */
- device_t dev3 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, dev2);
+ device_t dev2 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, dev1);
+ /* USB controller 2 */
+ device_t dev3 = dev_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_2, dev2);
- /* enable USB1 */
- if(dev2) {
- if (enable) {
- pci_write_config8(dev2, 0x3c, 0x05);
- pci_write_config8(dev2, 0x04, 0x07);
- } else {
- pci_write_config8(dev2, 0x3c, 0x00);
- pci_write_config8(dev2, 0x04, 0x00);
+ if(enable){
+ if(dev0) {
+ regval = pci_read_config8(dev0, 0x50);
+ regval &= ~(0x36);
+ pci_write_config8(dev0, 0x50, regval);
}
- }
-
- if(dev0) {
- regval = pci_read_config8(dev0, 0x50);
- if (enable)
- regval &= ~(0x10);
- else
- regval |= 0x10;
- pci_write_config8(dev0, 0x50, regval);
- }
-
- /* enable USB2 */
- if(dev3) {
- if (enable) {
- pci_write_config8(dev3, 0x3c, 0x05);
- pci_write_config8(dev3, 0x04, 0x07);
- } else {
- pci_write_config8(dev3, 0x3c, 0x00);
- pci_write_config8(dev3, 0x04, 0x00);
+
+ /* enable USB1 */
+ if(dev1) {
+ pci_write_config8(dev1, 0x04, 0x07);
}
- }
-
- if(dev0) {
- regval = pci_read_config8(dev0, 0x50);
- if (enable)
- regval &= ~(0x20);
- else
- regval |= 0x20;
- pci_write_config8(dev0, 0x50, regval);
+
+ /* enable USB2 */
+ if(dev2) {
+ pci_write_config8(dev2, 0x04, 0x07);
+ }
+
+ /* enable USB3 */
+ if(dev3) {
+ pci_write_config8(dev3, 0x04, 0x07);
+ }
+
+ }else{
+ if(dev0) {
+ regval = pci_read_config8(dev0, 0x50);
+ regval |= 0x36;
+ pci_write_config8(dev0, 0x50, regval);
+ }
+
+ /* disable USB1 */
+ if(dev1) {
+ pci_write_config8(dev1, 0x3c, 0x00);
+ pci_write_config8(dev1, 0x04, 0x00);
+ }
+
+ /* disable USB2 */
+ if(dev2) {
+ pci_write_config8(dev2, 0x3c, 0x00);
+ pci_write_config8(dev2, 0x04, 0x00);
+ }
+
+ /* disable USB3 */
+ if(dev3) {
+ pci_write_config8(dev3, 0x3c, 0x00);
+ pci_write_config8(dev3, 0x04, 0x00);
+ }
}
}
static void keyboard_on(void)
{
unsigned char regval;
-
+
/* Base 8235 controller */
- device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, 0);
-
- /* kevinh/Ispiri - update entire function to use
- new pci_write_config8 */
+ device_t dev0 = dev_find_device(PCI_VENDOR_ID_VIA, \
+ PCI_DEVICE_ID_VIA_8235, 0);
if (dev0) {
regval = pci_read_config8(dev0, 0x51);
- regval |= 0x0f;
+// regval |= 0x0f;
+ /* !!!FIX let's try this */
+ regval |= 0x1d;
pci_write_config8(dev0, 0x51, regval);
}
- init_pc_keyboard(0x60, 0x64, 0);
+ pc_keyboard_init();
}
static void nvram_on(void)
@@ -152,16 +165,43 @@
*/
void pci_assign_irqs(unsigned bus, unsigned slot, const unsigned char pIntAtoD[4]);
+/* taken some liberties - changed irq structures to pins numbers so that it is easier to
+ * change PCI irq assignments without having to change each PCI function individually
+ */
-static const unsigned char southbridgeIrqs[4] = { 11, 5, 10, 12 };
-static const unsigned char enetIrqs[4] = { 11, 5, 10, 12 };
-static const unsigned char slotIrqs[4] = { 5, 10, 12, 11 };
+/* pciIrqs contains the irqs assigned for PCI pins A-D */
+/* setting will depend on motherboard as irqs can be quite scarce */
+/* e.g on EPIA-MII, 16 bit CF card wants a dedicated IRQ. A 16 bit card in pcmcia socket */
+/* may want another - for now only claim 3 interupts for PCI, leaving at least one spare */
+/* for CF. */
+/* On EPIA-M one could allocated all four irqs to different numbers since there are no cardbus */
+/* devices */
+
+static const unsigned char pciIrqs[4] = { 5 , 9 , 9, 10 };
+
+static const unsigned char usbPins[4] = { 'A','B','C','D'};
+static const unsigned char enetPins[4] = { 'A','B','C','D'};
+static const unsigned char slotPins[4] = { 'B','C','D','A'};
+static const unsigned char firewirePins[4] = { 'B','C','D','A'};
+static const unsigned char vt8235Pins[4] = { 'A','B','C','D'};
+static const unsigned char vgaPins[4] = { 'A','B','C','D'};
+static const unsigned char cbPins[4] = { 'A','B','C','D'};
+static const unsigned char riserPins[4] = { 'A','B','C','D'};
/*
Our IDSEL mappings are as follows
PCI slot is AD31 (device 15) (00:14.0)
Southbridge is AD28 (device 12) (00:11.0)
*/
+static unsigned char *pin_to_irq(const unsigned char *pin)
+{
+ static unsigned char Irqs[4];
+ int i;
+ for (i = 0 ; i < 4 ; i++)
+ Irqs[i] = pciIrqs[ pin[i] - 'A' ];
+
+ return Irqs;
+}
static void pci_routing_fixup(void)
{
device_t dev;
@@ -177,23 +217,47 @@
PINTC = IRQ10
PINTD = IRQ12
*/
- pci_write_config8(dev, 0x55, 0xb0);
- pci_write_config8(dev, 0x56, 0xa5);
- pci_write_config8(dev, 0x57, 0xc0);
+ pci_write_config8(dev, 0x55, pciIrqs[0] << 4);
+ pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4) );
+ pci_write_config8(dev, 0x57, pciIrqs[3] << 4);
+
}
- // Standard southbridge components
- printk_info("setting southbridge\n");
- pci_assign_irqs(0, 0x11, southbridgeIrqs);
+
+
+ // firewire built into southbridge
+ printk_info("setting firewire\n");
+ pci_assign_irqs(0, 0x0d, pin_to_irq(firewirePins) );
+
+ // Standard usb components
+ printk_info("setting usb\n");
+ pci_assign_irqs(0, 0x10, pin_to_irq(usbPins) );
+
+ // VT8235 + sound hardware
+ printk_info("setting vt8235\n");
+ pci_assign_irqs(0, 0x11, pin_to_irq(vt8235Pins) );
// Ethernet built into southbridge
printk_info("setting ethernet\n");
- pci_assign_irqs(0, 0x12, enetIrqs);
+ pci_assign_irqs(0, 0x12, pin_to_irq(enetPins) );
+
+ // VGA
+ printk_info("setting vga\n");
+ pci_assign_irqs(1, 0x00, pin_to_irq(vgaPins) );
// PCI slot
printk_info("setting pci slot\n");
- pci_assign_irqs(0, 0x14, slotIrqs);
- printk_info("%s: DONE\n", __FUNCTION__);
+ pci_assign_irqs(0, 0x14, pin_to_irq(slotPins) );
+
+ // Cardbus slot
+ printk_info("setting cardbus slot\n");
+ pci_assign_irqs(0, 0x0a, pin_to_irq(cbPins) );
+
+ // Via 2 slot riser card 2nd slot
+ printk_info("setting riser slot\n");
+ pci_assign_irqs(0, 0x13, pin_to_irq(riserPins) );
+
+
}
@@ -213,13 +277,76 @@
}
}
+void set_led(void)
+{
+
+ // set power led to steady now that lxbios has virtually done its job
+ device_t dev0;
+ dev0 = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235,0);
+
+ pci_write_config8(dev0,0x94,0xb0);
+
+}
+
+/* set up the power management capabilities directly into ACPI mode */
+/* this avoids having to handle any System Management Interrupts (SMI's) which I can't */
+/* figure out how to do !!!! */
+
+void setup_pm(device_t dev0)
+{
+
+ // Set gen config 0
+ pci_write_config8(dev0,0x80,0x20);
+
+ // Set ACPI base address to IO 0x4000
+ pci_write_config16(dev0, 0x88, 0x0401);
+
+ // set ACPI irq to 5
+ pci_write_config8(dev0,0x82,0x55);
+
+ // primary interupt channel
+ pci_write_config16(dev0,0x84,0x30f2);
+
+ // throttle / stop clock control
+ pci_write_config8(dev0,0x8d,0x18);
+
+ pci_write_config8(dev0,0x93,0x88);
+ //pci_write_config8(dev0,0x94,0xb0);
+ pci_write_config8(dev0,0x95,0xc0);
+ pci_write_config8(dev0,0x98,0);
+ pci_write_config8(dev0,0x99,0xea);
+ pci_write_config8(dev0,0xe4,0x14);
+ pci_write_config8(dev0,0xe5,0x08);
+
+
+ // Enable ACPI access (and setup like award)
+ pci_write_config8(dev0, 0x81, 0x84);
+
+ outw(0xffff,0x400);
+ outw(0xffff,0x420);
+ outw(0xffff,0x428);
+ outl(0xffffffff,0x430);
+
+ outw(0x0,0x424);
+ outw(0x0,0x42a);
+ outw(0x1,0x42c);
+ outl(0x0,0x434);
+ outl(0x01,0x438);
+ outb(0x0,0x442);
+ outl(0xffff7fff,0x448);
+ outw(0x001,0x404);
+
+
+}
+
static void vt8235_init(struct southbridge_via_vt8235_config *conf)
{
unsigned char enables;
device_t dev0;
device_t dev1;
- device_t devpwr;
-
+ //device_t devpwr;
+ //int i;
+
// to do: use the pcibios_find function here, instead of
// hard coding the devfn.
// done - kevinh/Ispiri
@@ -243,6 +370,7 @@
// IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
// interrupts can be properly marked as level triggered.
enables = pci_read_config8(dev0, 0x40);
+ enables |= 0x45;
pci_write_config8(dev0, 0x40, enables);
// Set 0x42 to 0xf0 to match Award bios
@@ -250,6 +378,17 @@
enables |= 0xf0;
pci_write_config8(dev0, 0x42, enables);
+
+ /* Set 0x58 to 0x03 to match Award */
+ pci_write_config8(dev0, 0x58, 0x03);
+
+ /* Set bit 3 of 0x4f to match award (use INIT# as cpu reset) */
+ enables = pci_read_config8(dev0, 0x4f);
+ enables |= 0x08;
+ pci_write_config8(dev0, 0x4f, enables);
+
+
+
// Set bit 3 of 0x4a, to match award (dummy pci request)
enables = pci_read_config8(dev0, 0x4a);
enables |= 0x08;
@@ -271,67 +410,23 @@
}
- // enable com1 and com2.
- if (conf->enable_com_ports) {
- enables = pci_read_config8(dev0, 0x6e);
-
- /* 0x80 is enable com port b, 0x10 is to make it com2, 0x8
- * is enable com port a as com1 kevinh/Ispiri - Old code
- * thought 0x01 would make it com1, that was wrong enables =
- * 0x80 | 0x10 | 0x8 ; pci_write_config8(dev0, 0x6e,
- * enables); // note: this is also a redo of some port of
- * assembly, but we want everything up.
- */
-
- /* set com1 to 115 kbaud not clear how to do this yet.
- * forget it; done in assembly.
- */
+ /* enable serial irq */
+ pci_write_config8(dev0,0x52,0x9);
- }
- // enable IDE, since Linux won't do it.
- // First do some more things to devfn (17,0)
- // note: this should already be cleared, according to the book.
- enables = pci_read_config8(dev0, 0x50);
- printk_debug("IDE enable in reg. 50 is 0x%x\n", enables);
- enables &= ~8; // need manifest constant here!
- printk_debug("set IDE reg. 50 to 0x%x\n", enables);
- pci_write_config8(dev0, 0x50, enables);
-
- // set default interrupt values (IDE)
- enables = pci_read_config8(dev0, 0x4c);
- printk_debug("IRQs in reg. 4c are 0x%x\n", enables & 0xf);
- // clear out whatever was there.
- enables &= ~0xf;
- enables |= 4;
- printk_debug("setting reg. 4c to 0x%x\n", enables);
- pci_write_config8(dev0, 0x4c, enables);
-
- // set up the serial port interrupts.
- // com2 to 3, com1 to 4
- pci_write_config8(dev0, 0x46, 0x04);
- pci_write_config8(dev0, 0x47, 0x03);
- pci_write_config8(dev0, 0x6e, 0x98);
- //
+ /* dma */
+ pci_write_config8(dev0, 0x53, 0x00);
+
+ /* Use compatability mode - per award bios */
+ pci_write_config32(dev1, 0x10, 0x0);
+ pci_write_config32(dev1, 0x14, 0x0);
+ pci_write_config32(dev1, 0x18, 0x0);
+ pci_write_config32(dev1, 0x1c, 0x0);
+
+
// Power management setup
+ setup_pm(dev0);
+
//
- // Set ACPI base address to IO 0x4000
- //pci_write_config32(devpwr, 0x48, 0x4001);
-
- // Enable ACPI access (and setup like award)
- //pci_write_config8(devpwr, 0x41, 0x84);
-
- // Set hardware monitor base address to IO 0x6000
- //pci_write_config32(devpwr, 0x70, 0x6001);
-
- // Enable hardware monitor (and setup like award)
- //pci_write_config8(devpwr, 0x74, 0x01);
-
- // set IO base address to 0x5000
- //pci_write_config32(devpwr, 0x90, 0x5001);
-
- // Enable SMBus
- //pci_write_config8(devpwr, 0xd2, 0x01);
-
//
// IDE setup
//
@@ -422,6 +517,8 @@
// Start the rtc
rtc_init(0);
+
+
}
static void southbridge_init(struct chip *chip, enum chip_pass pass)
@@ -436,12 +533,23 @@
break;
case CONF_PASS_POST_PCI:
+ /* initialise the PIC - particularly so that VGA bios init code
+ doesn't get nasty unknown interupt vectors when it tries to establish
+ its interrupts. */
+ setup_i8259();
vt8235_init(conf);
pci_routing_fixup();
+ usb_on(1);
+ keyboard_on();
+ vga_fixup();
+
+
+
break;
case CONF_PASS_PRE_BOOT:
dump_south();
+ set_led();
break;
default:
diff --git a/src/southbridge/via/vt8235/vt8235_early_smbus.c b/src/southbridge/via/vt8235/vt8235_early_smbus.c
index 79b73df..26beea9 100644
--- a/src/southbridge/via/vt8235/vt8235_early_smbus.c
+++ b/src/southbridge/via/vt8235/vt8235_early_smbus.c
@@ -29,35 +29,64 @@
{
device_t dev;
unsigned char c;
+ int i;
/* Power management controller */
- dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235), 0);
+ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235), 0);
if (dev == PCI_DEV_INVALID) {
die("SMBUS controller not found\r\n");
- }
-
+ }
+ pci_write_config8(dev, 0xd2, (0x4 << 1 ));
+
// set IO base address to SMBUS_IO_BASE
- pci_write_config32(dev, 0x90, SMBUS_IO_BASE|1);
+ pci_write_config16(dev, 0xd0, SMBUS_IO_BASE);
// Enable SMBus
pci_write_config8(dev, 0xd2, (0x4 << 1)|1);
+ // Enable RTC
+ pci_write_config8(dev,0x51,0x04);
+
/* make it work for I/O ...
*/
- pci_write_config8(dev, 4, 1);
+ pci_write_config16(dev, 4, 1);
+
+
+ /* tell the world we're alive - make power led flash during bios execution */
+ pci_write_config8(dev,0x94,0xb2);
+
+
+ /* FIX for half baud rate problem */
+ /* let clocks and the like settle */
+ /* as yet arbitrary count - 1000 is too little 5000 works */
+ for(i = 0 ; i < 5000 ; i++)
+ outb(0x80,0x80);
+
+ /* southbridge doesn't seem to like to do much untill after this delay, so set up
+ * the flashing power LED again */
+ pci_write_config8(dev,0x94,0xb2);
/* The VT1211 serial port needs 48 mhz clock, on power up it is getting
only 24 mhz, there is some mysterious device on the smbus that can
fix this...this code below does it. */
outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
+ outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
+ outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
+ outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
+ for( ;;) {
+ c = inb(SMBUS_IO_BASE+SMBHSTSTAT);
+ if ((c & 1) == 0)
+ break;
+ }
outb(0x7f, SMBUS_IO_BASE+SMBHSTDAT0);
outb(0x83, SMBUS_IO_BASE+SMBHSTCMD);
- outb(CLOCK_SLAVE_ADDRESS<<1, SMBUS_IO_BASE+SMBXMITADD);
+ outb(CLOCK_SLAVE_ADDRESS<<1 , SMBUS_IO_BASE+SMBXMITADD);
outb(8 | I2C_TRANS_CMD, SMBUS_IO_BASE+SMBHSTCTL);
+
for (;;) {
c = inb(SMBUS_IO_BASE+SMBHSTSTAT);
- if (c & 1 == 0)
+ if ((c & 1) == 0)
break;
}
}
@@ -173,8 +202,9 @@
/* SMBUS Wait Ready */
for ( i = 0; i < 0xFFFF; i++ )
- if ( ((sts = inb(SMBUS_IO_BASE)) & 0x01) == 0 )
+ if ( ((sts = (inb(SMBUS_IO_BASE) & 0x1f)) & 0x01) == 0 )
break;
+
if ((sts & ~3) != 0) {
smbus_print_error(sts);
return 0;