arch/x86: update assembly to ensure 16-byte alignment into C

When the C compiler expects 16-byte alignment of the stack it is
at the call instruction.  Correct existing call points from assembly
to ensure the stacks are aligned to 16 bytes at the call instruction.

Change-Id: Icadd7a1f9284e92aecd99c30cb2acb307823682c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
diff --git a/src/arch/x86/exit_car.S b/src/arch/x86/exit_car.S
index 61287d2..86d46ca 100644
--- a/src/arch/x86/exit_car.S
+++ b/src/arch/x86/exit_car.S
@@ -27,6 +27,9 @@
 .text
 .global _start
 _start:
+	/* Assume stack alignment doesn't matter here as chipset_teardown_car
+	   is expected to be implemented in assembly. */
+
 	/* chipset_teardown_car() is expected to disable cache-as-ram. */
 	call	chipset_teardown_car
 
@@ -56,11 +59,20 @@
 	 */
 
 #if IS_ENABLED(CONFIG_SOC_SETS_MSRS)
-	push	%esp
+
+	mov	%esp, %ebp
+	/* Need to align stack to 16 bytes at the call instruction. Therefore
+	   account for the 1 push. */
+	andl	$0xfffffff0, %esp
+	sub	$12, %esp
+	push	%ebp
 	call	soc_set_mtrrs
+	/* Ignore fixing up %esp since we're setting it a new value. */
 
 	/* eax: new top_of_stack with setup_stack_and_mtrrs data removed */
 	movl	%eax, %esp
+	/* Align stack to 16 bytes at call instruction. */
+	andl	$0xfffffff0, %esp
 	call	soc_enable_mtrrs
 #else /* CONFIG_SOC_SETS_MSRS */
 	/* Clear variable MTRRs. */
@@ -109,6 +121,8 @@
 	wrmsr
 #endif /* CONFIG_SOC_SETS_MSRS */
 
+	/* Align stack to 16 bytes at call instruction. */
+	andl	$0xfffffff0, %esp
 	/* Call into main for postcar. */
 	call main
 	/* Should never return. */
diff --git a/src/soc/intel/common/block/cpu/car/cache_as_ram.S b/src/soc/intel/common/block/cpu/car/cache_as_ram.S
index 79c5c77..94e2694 100644
--- a/src/soc/intel/common/block/cpu/car/cache_as_ram.S
+++ b/src/soc/intel/common/block/cpu/car/cache_as_ram.S
@@ -184,6 +184,11 @@
 	/* Setup bootblock stack */
 	mov	$_car_stack_end, %esp
 
+	/* Need to align stack to 16 bytes at call instruction. Account for
+	   the two pushes below. */
+	andl	$0xfffffff0, %esp
+	sub	$8, %esp
+
 	/*push TSC value to stack*/
 	movd	%mm2, %eax
 	pushl	%eax	/* tsc[63:32] */