diff --git a/src/cpu/amd/car/post_cache_as_ram.c b/src/cpu/amd/car/post_cache_as_ram.c
index e8f0c92..270c542 100644
--- a/src/cpu/amd/car/post_cache_as_ram.c
+++ b/src/cpu/amd/car/post_cache_as_ram.c
@@ -4,6 +4,7 @@
 #include <string.h>
 #include <arch/stages.h>
 #include <cpu/x86/mtrr.h>
+#include "cbmem.h"
 #include "cpu/amd/car/disable_cache_as_ram.c"
 #include "cpu/x86/mtrr/earlymtrr.c"
 
diff --git a/src/mainboard/advansus/a785e-i/Makefile.inc b/src/mainboard/advansus/a785e-i/Makefile.inc
old mode 100644
new mode 100755
index a81d135..cf8ec26
--- a/src/mainboard/advansus/a785e-i/Makefile.inc
+++ b/src/mainboard/advansus/a785e-i/Makefile.inc
@@ -6,14 +6,15 @@
 
 #SB800 CIMx share AGESA V5 lib code
 ifneq ($(CONFIG_AMD_AGESA),y)
- romstage-y += ../../../vendorcode/amd/agesa/f14/Lib/amdlib.c
- ramstage-y += ../../../vendorcode/amd/agesa/f14/Lib/amdlib.c
+ AGESA_ROOT ?= src/vendorcode/amd/agesa/f14
+ romstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c
+ ramstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c
 
- AGESA_INC := -Isrc/vendorcode/amd/agesa/f14/ \
-	      -Isrc/vendorcode/amd/agesa/f14/Include \
-	      -Isrc/vendorcode/amd/agesa/f14/Proc/IDS/ \
-	      -Isrc/vendorcode/amd/agesa/f14/Proc/CPU/ \
-	      -Isrc/vendorcode/amd/agesa/f14/Proc/CPU/Family
+ AGESA_INC := -I$(AGESA_ROOT)/ \
+	      -I$(AGESA_ROOT)/Include \
+	      -I$(AGESA_ROOT)/Proc/IDS/ \
+	      -I$(AGESA_ROOT)/Proc/CPU/ \
+	      -I$(AGESA_ROOT)/Proc/CPU/Family
 
  CFLAGS += $(AGESA_INC)
 endif
diff --git a/src/mainboard/amd/inagua/Makefile.inc b/src/mainboard/amd/inagua/Makefile.inc
old mode 100644
new mode 100755
index 88af2b7..564d196
--- a/src/mainboard/amd/inagua/Makefile.inc
+++ b/src/mainboard/amd/inagua/Makefile.inc
@@ -31,3 +31,7 @@
 
 ramstage-y += reset.c
 ramstage-y += pmio.c
+
+AGESA_ROOT ?= src/vendorcode/amd/agesa/f14
+subdirs-$(CONFIG_CPU_AMD_AGESA_FAMILY14) += ../../../../$(AGESA_ROOT)
+#subdirs-$(CONFIG_AMD_CIMX) += ../../../vendorcode/amd/cimx
diff --git a/src/mainboard/amd/mahogany/mainboard.c b/src/mainboard/amd/mahogany/mainboard.c
index 9d471d0..0ccef10 100644
--- a/src/mainboard/amd/mahogany/mainboard.c
+++ b/src/mainboard/amd/mahogany/mainboard.c
@@ -25,11 +25,10 @@
 #include <cpu/x86/msr.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
-#include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/amd/mahogany/romstage.c b/src/mainboard/amd/mahogany/romstage.c
index b4c9635..5c9d538 100644
--- a/src/mainboard/amd/mahogany/romstage.c
+++ b/src/mainboard/amd/mahogany/romstage.c
@@ -44,7 +44,8 @@
 #include "cpu/x86/bist.h"
 #include "northbridge/amd/amdk8/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdk8/debug.c" /* After sb700/early_setup.c! */
 
 static void memreset(int controllers, const struct mem_controller *ctrl) { }
@@ -52,7 +53,7 @@
 
 static inline int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdk8/amdk8.h"
diff --git a/src/mainboard/amd/mahogany_fam10/mainboard.c b/src/mainboard/amd/mahogany_fam10/mainboard.c
index 7ed615d..2cbeaf1 100644
--- a/src/mainboard/amd/mahogany_fam10/mainboard.c
+++ b/src/mainboard/amd/mahogany_fam10/mainboard.c
@@ -25,11 +25,10 @@
 #include <cpu/x86/msr.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
-#include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/amd/mahogany_fam10/romstage.c b/src/mainboard/amd/mahogany_fam10/romstage.c
index 680e60d..4d26ca3 100644
--- a/src/mainboard/amd/mahogany_fam10/romstage.c
+++ b/src/mainboard/amd/mahogany_fam10/romstage.c
@@ -48,7 +48,8 @@
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdfam10/debug.c"
 #include <spd.h>
 
@@ -56,7 +57,7 @@
 
 static int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdfam10/amdfam10.h"
@@ -73,7 +74,6 @@
 
 #include "cpu/amd/model_10xxx/init_cpus.c"
 #include "northbridge/amd/amdfam10/early_ht.c"
-#include "southbridge/amd/sb700/early_setup.c"
 
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
diff --git a/src/mainboard/amd/tilapia_fam10/Kconfig b/src/mainboard/amd/tilapia_fam10/Kconfig
old mode 100644
new mode 100755
index b18115b..e9d6081
--- a/src/mainboard/amd/tilapia_fam10/Kconfig
+++ b/src/mainboard/amd/tilapia_fam10/Kconfig
@@ -83,4 +83,13 @@
 	hex
 	default 0x200000
 
+config VGA_BIOS
+        bool
+        default n
+
+config VGA_BIOS_ID
+        string
+        depends on VGA_BIOS
+        default "1002,9615"
+
 endif # BOARD_AMD_TILAPIA_FAM10
diff --git a/src/mainboard/amd/tilapia_fam10/mainboard.c b/src/mainboard/amd/tilapia_fam10/mainboard.c
old mode 100644
new mode 100755
index 84ff928..357bdac
--- a/src/mainboard/amd/tilapia_fam10/mainboard.c
+++ b/src/mainboard/amd/tilapia_fam10/mainboard.c
@@ -26,15 +26,12 @@
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
 #include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
 #define ADT7461_ADDRESS 0x4C
 #define ARA_ADDRESS     0x0C /* Alert Response Address */
 
-extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
-extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
-			       u8 val);
-
 #define ADT7461_read_byte(address) \
 	do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
 #define ARA_read_byte(address) \
@@ -42,8 +39,6 @@
 #define ADT7461_write_byte(address, val) \
 	do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
 
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/amd/tilapia_fam10/romstage.c b/src/mainboard/amd/tilapia_fam10/romstage.c
old mode 100644
new mode 100755
index 3a85a15..48b13be
--- a/src/mainboard/amd/tilapia_fam10/romstage.c
+++ b/src/mainboard/amd/tilapia_fam10/romstage.c
@@ -48,14 +48,15 @@
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdfam10/debug.c"
 
 static void activate_spd_rom(const struct mem_controller *ctrl) { }
 
 static int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdfam10/amdfam10.h"
diff --git a/src/mainboard/asrock/939a785gmh/mainboard.c b/src/mainboard/asrock/939a785gmh/mainboard.c
index 1cf1731..945a19f 100644
--- a/src/mainboard/asrock/939a785gmh/mainboard.c
+++ b/src/mainboard/asrock/939a785gmh/mainboard.c
@@ -25,11 +25,10 @@
 #include <cpu/x86/msr.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
-#include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/asrock/939a785gmh/romstage.c b/src/mainboard/asrock/939a785gmh/romstage.c
index b0ae247..bd45c16 100644
--- a/src/mainboard/asrock/939a785gmh/romstage.c
+++ b/src/mainboard/asrock/939a785gmh/romstage.c
@@ -45,7 +45,8 @@
 #include "cpu/x86/bist.h"
 #include "northbridge/amd/amdk8/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdk8/debug.c" /* After sb700/early_setup.c! */
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
@@ -56,7 +57,7 @@
 
 static inline int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdk8/amdk8.h"
@@ -101,7 +102,7 @@
 	pnp_write_config(GPIO2345_DEV, 0xe4, 0x0e);	/* data */
 	pnp_write_config(GPIO2345_DEV, 0xe5, 0x00);	/* No inversion */
 
-	/* GPIO30 - unknown output, set to 0 
+	/* GPIO30 - unknown output, set to 0
 	   GPI31 - unknown input NC?
 	   GPI32 - unknown input NC?
 	   GPIO33 - unknown output, set to 0.
diff --git a/src/mainboard/asus/m4a78-em/mainboard.c b/src/mainboard/asus/m4a78-em/mainboard.c
index 910fce1..6042d07 100644
--- a/src/mainboard/asus/m4a78-em/mainboard.c
+++ b/src/mainboard/asus/m4a78-em/mainboard.c
@@ -24,17 +24,11 @@
 #include <cpu/x86/msr.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
-#include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
 
-extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
-extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
-			       u8 val);
-
-
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/asus/m4a78-em/romstage.c b/src/mainboard/asus/m4a78-em/romstage.c
index 0675ee6..b14a7c6 100644
--- a/src/mainboard/asus/m4a78-em/romstage.c
+++ b/src/mainboard/asus/m4a78-em/romstage.c
@@ -48,14 +48,15 @@
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdfam10/debug.c"
 
 static void activate_spd_rom(const struct mem_controller *ctrl) { }
 
 static int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdfam10/amdfam10.h"
diff --git a/src/mainboard/asus/m4a785-m/mainboard.c b/src/mainboard/asus/m4a785-m/mainboard.c
index a5a15e8..e490f31 100644
--- a/src/mainboard/asus/m4a785-m/mainboard.c
+++ b/src/mainboard/asus/m4a785-m/mainboard.c
@@ -24,16 +24,13 @@
 #include <cpu/x86/msr.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
-#include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
 #define ADT7461_ADDRESS 0x4C
 #define ARA_ADDRESS     0x0C /* Alert Response Address */
 
-extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
-extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
-			       u8 val);
-
 #define ADT7461_read_byte(address) \
 	do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
 #define ARA_read_byte(address) \
@@ -41,8 +38,6 @@
 #define ADT7461_write_byte(address, val) \
 	do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
 
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/asus/m4a785-m/romstage.c b/src/mainboard/asus/m4a785-m/romstage.c
index 0675ee6..b14a7c6 100644
--- a/src/mainboard/asus/m4a785-m/romstage.c
+++ b/src/mainboard/asus/m4a785-m/romstage.c
@@ -48,14 +48,15 @@
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdfam10/debug.c"
 
 static void activate_spd_rom(const struct mem_controller *ctrl) { }
 
 static int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdfam10/amdfam10.h"
diff --git a/src/mainboard/gigabyte/ma785gmt/mainboard.c b/src/mainboard/gigabyte/ma785gmt/mainboard.c
index d6c95e0..768c9e1 100644
--- a/src/mainboard/gigabyte/ma785gmt/mainboard.c
+++ b/src/mainboard/gigabyte/ma785gmt/mainboard.c
@@ -25,16 +25,13 @@
 #include <cpu/x86/msr.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
-#include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
 #define ADT7461_ADDRESS 0x4C
 #define ARA_ADDRESS     0x0C /* Alert Response Address */
 
-extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
-extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
-			       u8 val);
-
 #define ADT7461_read_byte(address) \
 	do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
 #define ARA_read_byte(address) \
@@ -42,8 +39,6 @@
 #define ADT7461_write_byte(address, val) \
 	do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
 
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/gigabyte/ma785gmt/romstage.c b/src/mainboard/gigabyte/ma785gmt/romstage.c
index 8f3f55d..fcf023b 100644
--- a/src/mainboard/gigabyte/ma785gmt/romstage.c
+++ b/src/mainboard/gigabyte/ma785gmt/romstage.c
@@ -44,14 +44,15 @@
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdfam10/debug.c"
 
 static void activate_spd_rom(const struct mem_controller *ctrl) { }
 
 static int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdfam10/amdfam10.h"
diff --git a/src/mainboard/gigabyte/ma78gm/mainboard.c b/src/mainboard/gigabyte/ma78gm/mainboard.c
index dcb37992..1a00af6 100644
--- a/src/mainboard/gigabyte/ma78gm/mainboard.c
+++ b/src/mainboard/gigabyte/ma78gm/mainboard.c
@@ -26,11 +26,10 @@
 #include <cpu/x86/msr.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
-#include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/gigabyte/ma78gm/romstage.c b/src/mainboard/gigabyte/ma78gm/romstage.c
index c34fa5b..80b8d90 100644
--- a/src/mainboard/gigabyte/ma78gm/romstage.c
+++ b/src/mainboard/gigabyte/ma78gm/romstage.c
@@ -48,14 +48,15 @@
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdfam10/debug.c"
 
 static void activate_spd_rom(const struct mem_controller *ctrl) { }
 
 static int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdfam10/amdfam10.h"
diff --git a/src/mainboard/iei/kino-780am2-fam10/mainboard.c b/src/mainboard/iei/kino-780am2-fam10/mainboard.c
index 379efe5..4d0cd09 100644
--- a/src/mainboard/iei/kino-780am2-fam10/mainboard.c
+++ b/src/mainboard/iei/kino-780am2-fam10/mainboard.c
@@ -25,11 +25,10 @@
 #include <cpu/x86/msr.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
-#include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/iei/kino-780am2-fam10/romstage.c b/src/mainboard/iei/kino-780am2-fam10/romstage.c
index 192b47a..58b1845 100644
--- a/src/mainboard/iei/kino-780am2-fam10/romstage.c
+++ b/src/mainboard/iei/kino-780am2-fam10/romstage.c
@@ -48,7 +48,8 @@
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdfam10/debug.c"
 
 #define SERIAL_DEV PNP_DEV(0x2e, F71859_SP1)
@@ -57,7 +58,7 @@
 
 static int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdfam10/amdfam10.h"
diff --git a/src/mainboard/jetway/pa78vm5/mainboard.c b/src/mainboard/jetway/pa78vm5/mainboard.c
index 188cadf..6d0ceba 100644
--- a/src/mainboard/jetway/pa78vm5/mainboard.c
+++ b/src/mainboard/jetway/pa78vm5/mainboard.c
@@ -26,11 +26,10 @@
 #include <cpu/x86/msr.h>
 #include <cpu/amd/mtrr.h>
 #include <device/pci_def.h>
-#include <southbridge/amd/sb700/sb700.h>
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "chip.h"
 
-#define SMBUS_IO_BASE 0x6000
-
 uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_dereset(void);
diff --git a/src/mainboard/jetway/pa78vm5/romstage.c b/src/mainboard/jetway/pa78vm5/romstage.c
index 4ffcade..11bda6a 100644
--- a/src/mainboard/jetway/pa78vm5/romstage.c
+++ b/src/mainboard/jetway/pa78vm5/romstage.c
@@ -49,7 +49,8 @@
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
 #include "southbridge/amd/rs780/early_setup.c"
-#include "southbridge/amd/sb700/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
 #include "northbridge/amd/amdfam10/debug.c"
 
 #if CONFIG_TTYS0_BASE == 0x2f8
@@ -62,7 +63,7 @@
 
 static int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdfam10/amdfam10.h"
diff --git a/src/mainboard/supermicro/h8scm_fam10/Kconfig b/src/mainboard/supermicro/h8scm_fam10/Kconfig
old mode 100644
new mode 100755
index e0547ab5f4..7742133
--- a/src/mainboard/supermicro/h8scm_fam10/Kconfig
+++ b/src/mainboard/supermicro/h8scm_fam10/Kconfig
@@ -14,7 +14,6 @@
 	select HAVE_OPTION_TABLE
 	select GENERATE_PIRQ_TABLE
 	select GENERATE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
@@ -24,7 +23,6 @@
 	select BOARD_ROMSIZE_KB_2048
 	select RAMINIT_SYSINFO
 	select ENABLE_APIC_EXT_ID
-	select GFXUMA
 
 config MAINBOARD_DIR
 	string
diff --git a/src/mainboard/supermicro/h8scm_fam10/mainboard.c b/src/mainboard/supermicro/h8scm_fam10/mainboard.c
old mode 100644
new mode 100755
index e6ed22b..90b5335
--- a/src/mainboard/supermicro/h8scm_fam10/mainboard.c
+++ b/src/mainboard/supermicro/h8scm_fam10/mainboard.c
@@ -29,9 +29,6 @@
 #include <southbridge/amd/sr5650/cmn.h>
 #include "chip.h"
 
-#define SMBUS_IO_BASE 0x6000
-
-uint64_t uma_memory_base, uma_memory_size;
 
 void set_pcie_reset(void);
 void set_pcie_dereset(void);
@@ -95,47 +92,17 @@
 	printk
 	    (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
 	     __func__, msr2.lo, msr2.hi);
-#if (CONFIG_GFXUMA == 1)
-
-	/* refer to UMA Size Consideration in 780 BDG. */
-	switch (msr.lo) {
-	case 0x10000000:	/* 256M system memory */
-		uma_memory_size = 0x4000000;	/* 64M recommended UMA */
-		break;
-
-	case 0x20000000:	/* 512M system memory */
-		uma_memory_size = 0x8000000;	/* 128M recommended UMA */
-		break;
-
-	default:		/* 1GB and above system memory */
-		uma_memory_size = 0x10000000;	/* 256M recommended UMA */
-		break;
-	}
-#else
-	/* TODO: TOP_MEM2 */
-	uma_memory_size = 0;//0x8000000;	/* 128M recommended UMA */
-#endif
-	uma_memory_base = msr.lo - uma_memory_size;	/* TOP_MEM1 */
-	printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
-		    __func__, uma_memory_size, uma_memory_base);
 
 	set_pcie_dereset();
 	/* get_ide_dma66(); */
 }
 
+#if (CONFIG_HAVE_MAINBOARD_RESOURCES == 1)
 int add_mainboard_resources(struct lb_memory *mem)
 {
-	/* UMA is removed from system memory in the northbridge code, but
-	 * in some circumstances we want the memory mentioned as reserved.
- 	 */
-#if (CONFIG_GFXUMA == 1)
-	printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n",
-		    uma_memory_base, uma_memory_size);
-	lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base,
-			    uma_memory_size);
-#endif
 	return 0;
 }
+#endif
 
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD H8SCM   Mainboard")
diff --git a/src/mainboard/supermicro/h8scm_fam10/romstage.c b/src/mainboard/supermicro/h8scm_fam10/romstage.c
old mode 100644
new mode 100755
index 8101d2f..6e6e394
--- a/src/mainboard/supermicro/h8scm_fam10/romstage.c
+++ b/src/mainboard/supermicro/h8scm_fam10/romstage.c
@@ -42,13 +42,14 @@
 #include "northbridge/amd/amdfam10/reset_test.c"
 #include <console/loglevel.h>
 #include "cpu/x86/bist.h"
-#include "superio/nuvoton/wpcm450/early_init.c"
 #include <usbdebug.h>
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
-#include "southbridge/amd/sb700/early_setup.c"
-#include "southbridge/amd/sr5650/early_setup.c"
+#include "southbridge/amd/sb700/sb700.h"
+#include "southbridge/amd/sb700/smbus.h"
+#include "southbridge/amd/sr5650/sr5650.h"
+#include "superio/nuvoton/wpcm450/wpcm450.h"
 #include "northbridge/amd/amdfam10/debug.c"
 
 static void activate_spd_rom(const struct mem_controller *ctrl)
@@ -57,7 +58,7 @@
 
 static int spd_read_byte(u32 device, u32 address)
 {
-	return smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
 #include "northbridge/amd/amdfam10/amdfam10.h"
@@ -102,7 +103,10 @@
 		set_bsp_node_CHtExtNodeCfgEn();
 		enumerate_ht_chain();
 
-		disable_pcie_bridge();
+		/* SR56x0 pcie bridges block pci_locate_device() before pcie training.
+		 * disable all pcie bridges on SR56x0 to work around it
+		 */
+		sr5650_disable_pcie_bridge();
 		sb7xx_51xx_lpc_port80();
 	}
 
@@ -181,7 +185,6 @@
 
 	/* run _early_setup before soft-reset. */
 	sr5650_early_setup();
-	disable_pcie_bridge();
 	sb7xx_51xx_early_setup();
 
 #if CONFIG_SET_FIDVID
diff --git a/src/northbridge/amd/amdk8/reset_test.c b/src/northbridge/amd/amdk8/reset_test.c
index b775813..bee3faa 100644
--- a/src/northbridge/amd/amdk8/reset_test.c
+++ b/src/northbridge/amd/amdk8/reset_test.c
@@ -44,7 +44,8 @@
 	pci_write_config32(device, HT_INIT_CONTROL, htic);
 }
 
-static void set_bios_reset(void)
+void __attribute__ ((weak)) set_bios_reset(void);
+void __attribute__ ((weak)) set_bios_reset(void)
 {
 	u32 htic;
 	htic = pci_read_config32(PCI_DEV(0, 0x18, 0), HT_INIT_CONTROL);
diff --git a/src/southbridge/amd/sb700/Makefile.inc b/src/southbridge/amd/sb700/Makefile.inc
old mode 100644
new mode 100755
index 8e8e0297..e174e8b
--- a/src/southbridge/amd/sb700/Makefile.inc
+++ b/src/southbridge/amd/sb700/Makefile.inc
@@ -1,11 +1,16 @@
 driver-y += sb700.c
 driver-y += usb.c
 driver-y += lpc.c
+driver-y += smbus.c
 driver-y += sm.c
 driver-y += ide.c
 driver-y += sata.c
 driver-y += hda.c
 driver-y += pci.c
 ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.c
+romstage-y += reset.c
 ramstage-y += reset.c
 romstage-y += enable_usbdebug.c
+
+romstage-y += early_setup.c
+romstage-y += smbus.c
diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c
old mode 100644
new mode 100755
index a5e76c7..1f46da2
--- a/src/southbridge/amd/sb700/early_setup.c
+++ b/src/southbridge/amd/sb700/early_setup.c
@@ -20,14 +20,19 @@
 #ifndef _SB700_EARLY_SETUP_C_
 #define _SB700_EARLY_SETUP_C_
 
+#include <stdint.h>
+#include <arch/cpu.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/msr.h>
+
 #include <reset.h>
 #include <arch/cpu.h>
 #include <cbmem.h>
 #include "sb700.h"
-#include "smbus.c"
+#include "smbus.h"
 
-#define SMBUS_IO_BASE 0x6000	/* Is it a temporary SMBus I/O base address? */
-	 /*SIZE 0x40 */
 
 static void pmio_write(u8 reg, u8 value)
 {
@@ -129,7 +134,7 @@
 *	Console output through any port besides 0x3f8 is unsupported.
 *	If you use FWH ROMs, you have to setup IDSEL.
 ***************************************/
-static void sb7xx_51xx_lpc_init(void)
+void sb7xx_51xx_lpc_init(void)
 {
 	u8 reg8;
 	u32 reg32;
@@ -216,7 +221,7 @@
 }
 
 /* what is its usage? */
-static u32 get_sbdn(u32 bus)
+u32 __attribute__ ((weak)) get_sbdn(u32 bus)
 {
 	device_t dev;
 
@@ -233,7 +238,7 @@
 /*
  * RPR 2.4 C-state and VID/FID change for the K8 platform.
  */
-static void enable_fid_change_on_sb(u32 sbbusn, u32 sbdn)
+void __attribute__((weak)) enable_fid_change_on_sb(u32 sbbusn, u32 sbdn)
 {
 	u8 byte;
 	byte = pmio_read(0x9a);
@@ -284,22 +289,6 @@
 	pmio_write(0x67, 0x6);
 }
 
-void hard_reset(void)
-{
-	set_bios_reset();
-
-	/* full reset */
-	outb(0x0a, 0x0cf9);
-	outb(0x0e, 0x0cf9);
-}
-
-void soft_reset(void)
-{
-	set_bios_reset();
-	/* link reset */
-	outb(0x06, 0x0cf9);
-}
-
 void sb7xx_51xx_pci_port80(void)
 {
 	u8 byte;
@@ -681,7 +670,7 @@
 /*
 * It should be called during early POST after memory detection and BIOS shadowing but before PCI bus enumeration.
 */
-static void sb7xx_51xx_before_pci_init(void)
+void sb7xx_51xx_before_pci_init(void)
 {
 	sb700_pci_cfg();
 }
@@ -689,18 +678,13 @@
 /*
 * This function should be called after enable_sb700_smbus().
 */
-static void sb7xx_51xx_early_setup(void)
+void sb7xx_51xx_early_setup(void)
 {
 	printk(BIOS_INFO, "sb700_early_setup()\n");
 	sb700_por_init();
 	sb700_acpi_init();
 }
 
-static int smbus_read_byte(u32 device, u32 address)
-{
-	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
-}
-
 int s3_save_nvram_early(u32 dword, int size, int  nvram_pos)
 {
 	int i;
@@ -732,7 +716,7 @@
 }
 
 #if CONFIG_HAVE_ACPI_RESUME == 1
-static int acpi_is_wakeup_early(void)
+int acpi_is_wakeup_early(void)
 {
 	u16 tmp;
 	tmp = inw(ACPI_PM1_CNT_BLK);
diff --git a/src/southbridge/amd/sb700/pmio.c b/src/southbridge/amd/sb700/pmio.c
new file mode 100755
index 0000000..baded54
--- /dev/null
+++ b/src/southbridge/amd/sb700/pmio.c
@@ -0,0 +1,55 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#include <arch/io.h>	/*inb, outb*/
+#include "pmio.h"
+
+static void pmio_write_index(u16 port_base, u8 reg, u8 value)
+{
+	outb(reg, port_base);
+	outb(value, port_base + 1);
+}
+
+static u8 pmio_read_index(u16 port_base, u8 reg)
+{
+	outb(reg, port_base);
+	return inb(port_base + 1);
+}
+
+void pm_iowrite(u8 reg, u8 value)
+{
+	pmio_write_index(PM_INDEX, reg, value);
+}
+
+u8 pm_ioread(u8 reg)
+{
+	return pmio_read_index(PM_INDEX, reg);
+}
+
+void pm2_iowrite(u8 reg, u8 value)
+{
+	pmio_write_index(PM2_INDEX, reg, value);
+}
+
+u8 pm2_ioread(u8 reg)
+{
+	return pmio_read_index(PM2_INDEX, reg);
+}
+
diff --git a/src/southbridge/amd/sb700/pmio.h b/src/southbridge/amd/sb700/pmio.h
new file mode 100755
index 0000000..207fdc2
--- /dev/null
+++ b/src/southbridge/amd/sb700/pmio.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#ifndef _PMIO_H_
+#define _PMIO_H_
+
+#define PM_INDEX	0xCD6
+#define PM_DATA		0xCD7
+#define PM2_INDEX	0xCD0
+#define PM2_DATA	0xCD1
+
+void pm_iowrite(u8 reg, u8 value);
+u8 pm_ioread(u8 reg);
+void pm2_iowrite(u8 reg, u8 value);
+u8 pm2_ioread(u8 reg);
+
+#endif
diff --git a/src/southbridge/amd/sb700/reset.c b/src/southbridge/amd/sb700/reset.c
old mode 100644
new mode 100755
index 32ee66b..27ca32e
--- a/src/southbridge/amd/sb700/reset.c
+++ b/src/southbridge/amd/sb700/reset.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 - 2011 Advanced Micro Devices, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,17 +17,51 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
-#include <reset.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
+#include <reset.h>		/* hard_reset, soft_rest*/
+#include <arch/io.h>		/* inb, outb */
+#include <arch/romcc_io.h>	/* pci_read_config32, device_t, PCI_DEV */
 
-#include "../../../northbridge/amd/amdk8/reset_test.c"
+#define HT_INIT_CONTROL		0x6C
+#define HTIC_BIOSR_Detect	(1<<5)
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 32
+#define NODE_PCI(x, fn)        ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
+#else
+#define NODE_PCI(x, fn)        PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
+#endif
+
+static void set_bios_reset(void)
+{
+	u32 nodes;
+	u32 htic;
+	device_t dev;
+	int i;
+
+	nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
+	for(i = 0; i < nodes; i++) {
+		dev = NODE_PCI(i, 0);
+		htic = pci_read_config32(dev, HT_INIT_CONTROL);
+		htic &= ~HTIC_BIOSR_Detect;
+		pci_write_config32(dev, HT_INIT_CONTROL, htic);
+	}
+}
 
 void hard_reset(void)
 {
 	set_bios_reset();
+
 	/* Try rebooting through port 0xcf9 */
-	/* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
+	/* Actually it is not a real hard_reset
+	 * --- it only reset coherent link table, but not reset link freq and width
+	 */
 	outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
 	outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
 }
+
+void soft_reset(void)
+{
+	set_bios_reset();
+	/* link reset */
+	outb(0x06, 0x0cf9);
+}
+
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
old mode 100644
new mode 100755
index 89eba4b..411baf5
--- a/src/southbridge/amd/sb700/sata.c
+++ b/src/southbridge/amd/sb700/sata.c
@@ -280,7 +280,7 @@
 }
 
 static struct pci_operations lops_pci = {
-	/* .set_subsystem = pci_dev_set_subsystem, */
+	.set_subsystem = pci_dev_set_subsystem,
 };
 
 static struct device_operations sata_ops = {
diff --git a/src/southbridge/amd/sb700/sb700.h b/src/southbridge/amd/sb700/sb700.h
old mode 100644
new mode 100755
index 60eea47..794dd96
--- a/src/southbridge/amd/sb700/sb700.h
+++ b/src/southbridge/amd/sb700/sb700.h
@@ -63,8 +63,11 @@
 #ifdef __PRE_RAM__
 void sb7xx_51xx_lpc_port80(void);
 void sb7xx_51xx_pci_port80(void);
+void sb7xx_51xx_lpc_init(void);
 void sb7xx_51xx_enable_wideio(u8 wio_index, u16 base);
 void sb7xx_51xx_disable_wideio(u8 wio_index);
+void sb7xx_51xx_early_setup(void);
+void sb7xx_51xx_before_pci_init(void);
 #else
 #include <device/pci.h>
 /* allow override in mainboard.c */
@@ -72,8 +75,15 @@
 
 #endif
 
+#if CONFIG_HAVE_ACPI_RESUME == 1
+int acpi_is_wakeup_early(void);
+#endif
+
 int s3_save_nvram_early(u32 dword, int size, int  nvram_pos);
 int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos);
 
 void enable_usbdebug(unsigned int port);
+
+u32 __attribute__ ((weak)) get_sbdn(u32 bus);
+void __attribute__((weak)) enable_fid_change_on_sb(u32 sbbusn, u32 sbdn);
 #endif /* SB700_H */
diff --git a/src/southbridge/amd/sb700/sm.c b/src/southbridge/amd/sb700/sm.c
old mode 100644
new mode 100755
index 7d341df..05065b6
--- a/src/southbridge/amd/sb700/sm.c
+++ b/src/southbridge/amd/sb700/sm.c
@@ -30,7 +30,7 @@
 #include <arch/ioapic.h>
 #include <stdlib.h>
 #include "sb700.h"
-#include "smbus.c"
+#include "smbus.h"
 
 #define NMI_OFF 0
 
@@ -95,6 +95,20 @@
 	byte |= 4 << 2;		/* set NumSerIrqBits=4 */
 	pci_write_config8(dev, 0x69, byte);
 
+	/* Sx State Settings
+	 * Note: These 2 registers need to be set correctly for the S-state
+	 * to work properly. Otherwise the system may hang during resume
+	 * from the S-state.
+	 */
+	/*Use 8us clock for delays in the S-state resume timing sequence.*/
+	byte = pm_ioread(0x65);
+	byte &= ~(1 << 7);
+	pm_iowrite(0x65, byte);
+	/* Delay the APIC interrupt to the CPU until the system has fully resumed from the S-state. */
+	byte = pm_ioread(0x68);
+	byte |= 1 << 2;
+	pm_iowrite(0x68, byte);
+
 	/* IRQ0From8254 */
 	byte = pci_read_config8(dev, 0x41);
 	byte &= ~(1 << 7);
@@ -219,10 +233,10 @@
 	 *  Transactions for the K8 Platform (for All Revisions) */
 	abcfg_reg(0x10090, 1 << 8, 1 << 8);
 
-	/* ACPI_SOFT_CLOCK_THROTTLE_PERIOD */
+	/* Set ACPI Software clock Throttling Period to 244 us*/
 	byte = pm_ioread(0x68);
 	byte &= ~(3 << 6);
-	byte |= (2 << 6);	/* 224us */
+	byte |= (2 << 6);	/* 244us */
 	pm_iowrite(0x68, byte);
 
 	if (REV_SB700_A15 == rev) {
@@ -367,16 +381,16 @@
 	res->limit = 0xFFFFFFFFUL;	/* res->base + res->size -1; */
 	res->align = 8;
 	res->gran = 8;
-	res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
+	res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_RESERVE | IORESOURCE_ASSIGNED;
 
-	/* Linux ACPI crashes when it is 1. For late debugging. */
+	/* HPET */
 	res = new_resource(dev, 0xB4);	/* TODO: test hpet */
 	res->base  = 0xfed00000;	/* reset hpet to widely accepted address */
 	res->size = 0x400;
 	res->limit = 0xFFFFFFFFUL;	/* res->base + res->size -1; */
 	res->align = 8;
 	res->gran = 8;
-	res->flags = IORESOURCE_MEM | IORESOURCE_FIXED;
+	res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_RESERVE | IORESOURCE_ASSIGNED;
 
 	/* dev->command |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; */
 
@@ -387,7 +401,7 @@
 	res->limit = 0xFFFFUL;	/* res->base + res->size -1; */
 	res->align = 8;
 	res->gran = 8;
-	res->flags = IORESOURCE_IO | IORESOURCE_FIXED;
+	res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_RESERVE | IORESOURCE_ASSIGNED;
 
 	compact_resources(dev);
 }
diff --git a/src/southbridge/amd/sb700/smbus.c b/src/southbridge/amd/sb700/smbus.c
old mode 100644
new mode 100755
index e47bcee..6edc3de
--- a/src/southbridge/amd/sb700/smbus.c
+++ b/src/southbridge/amd/sb700/smbus.c
@@ -22,6 +22,51 @@
 
 #include "smbus.h"
 
+void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val)
+{
+	u32 tmp;
+
+	outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);
+	tmp = inl(AB_DATA);
+	/* rpr 4.2
+	 * For certain revisions of the chip, the ABCFG registers,
+	 * with an address of 0x100NN (where 'N' is any hexadecimal
+	 * number), require an extra programming step.*/
+	reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL;
+
+	tmp &= ~mask;
+	tmp |= val;
+
+	/* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */
+	outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);	/* probably we dont have to do it again. */
+	outl(tmp, AB_DATA);
+	reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL;
+}
+
+/* space = 0: AX_INDXC, AX_DATAC
+ * space = 1: AX_INDXP, AX_DATAP
+ */
+void alink_ax_indx(u32 space, u32 axindc, u32 mask, u32 val)
+{
+	u32 tmp;
+
+	/* read axindc to tmp */
+	outl(space << 30 | space << 3 | 0x30, AB_INDX);
+	outl(axindc, AB_DATA);
+	outl(space << 30 | space << 3 | 0x34, AB_INDX);
+	tmp = inl(AB_DATA);
+
+	tmp &= ~mask;
+	tmp |= val;
+
+	/* write tmp */
+	outl(space << 30 | space << 3 | 0x30, AB_INDX);
+	outl(axindc, AB_DATA);
+	outl(space << 30 | space << 3 | 0x34, AB_INDX);
+	outl(tmp, AB_DATA);
+}
+
+
 static inline void smbus_delay(void)
 {
 	outb(inb(0x80), 0x80);
@@ -177,48 +222,4 @@
 	return 0;
 }
 
-static void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val)
-{
-	u32 tmp;
-
-	outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);
-	tmp = inl(AB_DATA);
-	/* rpr 4.2
-	 * For certain revisions of the chip, the ABCFG registers,
-	 * with an address of 0x100NN (where 'N' is any hexadecimal
-	 * number), require an extra programming step.*/
-	reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL;
-
-	tmp &= ~mask;
-	tmp |= val;
-
-	/* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */
-	outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);	/* probably we dont have to do it again. */
-	outl(tmp, AB_DATA);
-	reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL;
-}
-
-/* space = 0: AX_INDXC, AX_DATAC
- * space = 1: AX_INDXP, AX_DATAP
- */
-static inline void alink_ax_indx(u32 space /*c or p? */ , u32 axindc,
-			  u32 mask, u32 val)
-{
-	u32 tmp;
-
-	/* read axindc to tmp */
-	outl(space << 30 | space << 3 | 0x30, AB_INDX);
-	outl(axindc, AB_DATA);
-	outl(space << 30 | space << 3 | 0x34, AB_INDX);
-	tmp = inl(AB_DATA);
-
-	tmp &= ~mask;
-	tmp |= val;
-
-	/* write tmp */
-	outl(space << 30 | space << 3 | 0x30, AB_INDX);
-	outl(axindc, AB_DATA);
-	outl(space << 30 | space << 3 | 0x34, AB_INDX);
-	outl(tmp, AB_DATA);
-}
 #endif
diff --git a/src/southbridge/amd/sb700/smbus.h b/src/southbridge/amd/sb700/smbus.h
old mode 100644
new mode 100755
index c21a1dc..9ddfc35
--- a/src/southbridge/amd/sb700/smbus.h
+++ b/src/southbridge/amd/sb700/smbus.h
@@ -20,6 +20,13 @@
 #ifndef SB700_SMBUS_H
 #define SB700_SMBUS_H
 
+#include <stdint.h>
+#include "stddef.h"
+#include <arch/io.h>
+
+#define SMBUS_IO_BASE 0x6000	/* Is it a temporary SMBus I/O base address? */
+				/*SIZE 0x40 */
+
 #define SMBHSTSTAT 0x0
 #define SMBSLVSTAT 0x1
 #define SMBHSTCTRL 0x2
@@ -56,10 +63,11 @@
 #define axindxp_reg(reg, mask, val)	\
 	alink_ax_indx(1, (reg), (mask), (val))
 
+void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val);
+void alink_ax_indx(u32 space, u32 axindc, u32 mask, u32 val);
 int do_smbus_recv_byte(u32 smbus_io_base, u32 device);
 int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val);
 int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
 int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val);
 
-
 #endif
diff --git a/src/southbridge/amd/sb700/usb.c b/src/southbridge/amd/sb700/usb.c
old mode 100644
new mode 100755
index 2957dc5..79324018
--- a/src/southbridge/amd/sb700/usb.c
+++ b/src/southbridge/amd/sb700/usb.c
@@ -178,6 +178,7 @@
 		dword |= 1 << 8;
 		dword &= ~(1 << 27); /* 6.23 */
 	}
+	pci_write_config32(dev, 0x50, dword);
 	printk(BIOS_DEBUG, "rpr 6.23, final dword=%x\n", dword);
 }
 
diff --git a/src/southbridge/amd/sr5650/Makefile.inc b/src/southbridge/amd/sr5650/Makefile.inc
index a2d10d7..0a4ce39 100644
--- a/src/southbridge/amd/sr5650/Makefile.inc
+++ b/src/southbridge/amd/sr5650/Makefile.inc
@@ -1,3 +1,5 @@
 driver-y += sr5650.c
 driver-y += pcie.c
 driver-y += ht.c
+
+romstage-y += early_setup.c
diff --git a/src/southbridge/amd/sr5650/cmn.h b/src/southbridge/amd/sr5650/cmn.h
old mode 100644
new mode 100755
index e94fcdd..6692b86
--- a/src/southbridge/amd/sr5650/cmn.h
+++ b/src/southbridge/amd/sr5650/cmn.h
@@ -20,13 +20,21 @@
 #ifndef __SR5650_CMN_H__
 #define __SR5650_CMN_H__
 
+#include <arch/io.h>
+
 #define NBMISC_INDEX 	0x60
 #define NBHTIU_INDEX 	0x94 /* Note: It is different with RS690, whose HTIU index is 0xA8 */
 #define NBMC_INDEX 	0xE8
 #define NBPCIE_INDEX  	0xE0
-#define EXT_CONF_BASE_ADDRESS 0xE0000000
+#define EXT_CONF_BASE_ADDRESS	CONFIG_MMCONF_BASE_ADDRESS
 #define	TEMP_MMIO_BASE_ADDRESS	0xC0000000
 
+#define axindxc_reg(reg, mask, val) \
+	alink_ax_indx(0, (reg), (mask), (val))
+
+#define AB_INDX   0xCD8
+#define AB_DATA   (AB_INDX+4)
+
 static inline u32 nb_read_index(device_t dev, u32 index_reg, u32 index)
 {
 	pci_write_config32(dev, index_reg, index);
diff --git a/src/southbridge/amd/sr5650/early_setup.c b/src/southbridge/amd/sr5650/early_setup.c
old mode 100644
new mode 100755
index 5f7438c..50f836e
--- a/src/southbridge/amd/sr5650/early_setup.c
+++ b/src/southbridge/amd/sr5650/early_setup.c
@@ -17,20 +17,50 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
+#include <stdint.h>
+#include <arch/cpu.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/msr.h>
 #include "sr5650.h"
 #include "cmn.h"
 
+/* space = 0: AX_INDXC, AX_DATAC
+ * space = 1: AX_INDXP, AX_DATAP
+ */
+static void alink_ax_indx(u32 space, u32 axindc, u32 mask, u32 val)
+{
+        u32 tmp;
+
+        /* read axindc to tmp */
+        outl(space << 30 | space << 3 | 0x30, AB_INDX);
+        outl(axindc, AB_DATA);
+        outl(space << 30 | space << 3 | 0x34, AB_INDX);
+        tmp = inl(AB_DATA);
+
+        tmp &= ~mask;
+        tmp |= val;
+
+        /* write tmp */
+        outl(space << 30 | space << 3 | 0x30, AB_INDX);
+        outl(axindc, AB_DATA);
+        outl(space << 30 | space << 3 | 0x34, AB_INDX);
+        outl(tmp, AB_DATA);
+}
+
+
 /* family 10 only, for reg > 0xFF */
-#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1
+#if (CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1) || (CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 == 1)
 static void set_fam10_ext_cfg_enable_bits(device_t fam10_dev, u32 reg_pos, u32 mask,
 				  u32 val)
 {
 	u32 reg_old, reg;
-	reg = reg_old = Get_NB32(fam10_dev, reg_pos);
+	reg = reg_old = pci_read_config32(fam10_dev, reg_pos);
 	reg &= ~mask;
 	reg |= val;
 	if (reg != reg_old) {
-		Set_NB32(fam10_dev, reg_pos, reg);
+		pci_write_config32(fam10_dev, reg_pos, reg);
 	}
 }
 #else
@@ -113,17 +143,19 @@
 	[0xe] = 0xC6,		/* 2.6Ghz HyperTransport 3 only */
 };
 
-static void sr5650_htinit(void)
+void sr5650_htinit(void)
 {
 	/*
 	 * About HT, it has been done in enumerate_ht_chain().
 	 */
-	device_t cpu_f0, sr5650_f0, clk_f1, cpu1_f0;
+	device_t cpu_f0, sr5650_f0, clk_f1;
 	u32 reg;
-	u8 cpu_ht_freq, ibias;
+	u8 cpu_ht_freq, cpu_htfreq_max, ibias;
+	u8 sbnode;
+	u8 sblink;
+	u16 linkfreq_reg;
+	u16 linkfreqext_reg;
 
-	cpu_f0 = PCI_DEV(0, 0x18, 0);
-	cpu1_f0 = PCI_DEV(0, 0x19, 0);
 	/************************
 	* get cpu's ht freq, in cpu's function 0, offset 0x88
 	* bit11-8, specifics the maximum operation frequency of the link's transmitter clock.
@@ -133,16 +165,36 @@
 	* please see the table sr5650_ibias about the value and its corresponding frequency.
 	************************/
 	/* Link0, Link1 are for connection between P0 and P1.
-	 * Link2 should be 0xC8?
 	 * TODO: Check the topology of the MP and NB. Or we just read the nbconfig? */
 	/* NOTE: In most cases, we only have one CPU. In that case, we should read 0x88. */
 
-	reg = pci_read_config32(cpu1_f0, 0x0);
-	reg = pci_read_config32(cpu_f0,
-				reg == 0 || reg == -1 ? 0x88 : 0xC8
-		);
+	/* Find out the node ID and the Link ID that
+	 * connects to the Southbridge (system IO hub).
+	 */
+	sbnode = (pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60) >> 8) & 7;
+	sblink = (pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64) >> 8) & 3; /* bit[10] sublink, bit[9,8] link. */
+	cpu_f0 = PCI_DEV(0, (0x18 + sbnode), 0);
+
+	/*
+	 * link freq reg of Link0, 1, 2, 3 is 0x88, 0xA8, 0xC8, 0xE8 respectively
+	 * link freq ext reg of Link0, 1, 2, 3 is 0x9C, 0xBC, 0xDC, 0xFC respectively
+	 */
+	linkfreq_reg = 0x88 + (sblink << 5);
+	linkfreqext_reg = 0x9C + (sblink << 5);
+	reg = pci_read_config32(cpu_f0, linkfreq_reg);
+
 	cpu_ht_freq = (reg & 0xf00) >> 8;
-	printk(BIOS_INFO, "sr5650_htinit cpu_ht_freq=%x.\n", cpu_ht_freq);
+
+	/* Freq[4] is only valid for revision D and later processors */
+	if (cpuid_eax(1) >= 0x100F80) {
+		cpu_htfreq_max = 0x14;
+		cpu_ht_freq |= ((pci_read_config32(cpu_f0, linkfreqext_reg) & 0x01) << 4);
+	} else {
+		cpu_htfreq_max = 0x0F;
+	}
+
+	printk(BIOS_INFO, "sr5650_htinit: Node %x Link %x, HT freq=%x.\n",
+			sbnode, sblink, cpu_ht_freq);
 	sr5650_f0 = PCI_DEV(0, 0, 0);
 
 	clk_f1 = PCI_DEV(0, 0, 1); /* We need to make sure the F1 is accessible. */
@@ -162,13 +214,13 @@
 		set_nbcfg_enable_bits(clk_f1, 0xD8, 0x3FF, ibias);
 		/* Optimizes chipset HT transmitter drive strength */
 		set_htiu_enable_bits(sr5650_f0, 0x2A, 0x3, 0x3);
-	} else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < 0xf)) {
+	} else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < cpu_htfreq_max)) {
 		printk(BIOS_INFO, "sr5650_htinit: HT3 mode\n");
 
 		/* Enable Protocol checker */
 		set_htiu_enable_bits(sr5650_f0, 0x1E, 0xFFFFFFFF, 0x7FFFFFFC);
 
-		#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1		/* save some spaces */
+#if (CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1) || (CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 == 1) /* save some spaces */
 		/* HT3 mode, RPR 5.4.3 */
 		set_nbcfg_enable_bits(sr5650_f0, 0x9c, 0x3 << 16, 0);
 
@@ -189,83 +241,36 @@
 		/* Enables strict TM4 detection */
 		set_htiu_enable_bits(sr5650_f0, 0x15, 0x1 << 22, 0x1 << 22);
 
+		/* Optimizes chipset HT transmitter drive strength */
+		set_htiu_enable_bits(sr5650_f0, 0x2A, 0x3 << 0, 0x1 << 0);
+
 		/* HyperTransport 3 Processor register settings to be done in northbridge */
+
 		/* Enables error-retry mode */
-		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x130, 1 << 0, 1 << 0);
-		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x134, 1 << 0, 1 << 0); /* TODO: Check if it is needed to set other node. */
-		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x138, 1 << 0, 1 << 0);
+		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x130 + (sblink << 2), 1 << 0, 1 << 0);
+
 		/* Enables scrambling */
-		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x170, 1 << 3, 1 << 3);
-		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x174, 1 << 3, 1 << 3); /* TODO: Check if it is needed to set other node. */
-		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x178, 1 << 3, 1 << 3);
+		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x170 + (sblink << 2), 1 << 3, 1 << 3);
+
 		/* Enables transmitter de-emphasis
-		 * This depends on the PCB design and the trace */
+		 * This depends on the PCB design and the trace
+		 */
 		/* Disables command throttling */
 		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x168, 1 << 10, 1 << 10);
+
 		/* Sets Training 0 Time. See T0Time table for encodings */
-		set_fam10_ext_cfg_enable_bits(cpu_f0, 0x16C, 0x3F, 0x20);
+		/* AGESA have set it to recommanded value already
+		 * The recommended values are 14h(2us) if F0x[18C:170][LS2En]=0
+		 * and 26h(12us) if F0x[18C:170][LS2En]=1
+		 */
+		//set_fam10_ext_cfg_enable_bits(cpu_f0, 0x16C, 0x3F, 0x26);
+
 		/* HT Buffer Allocation for Ganged Links!!! */
-		#endif	/* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 */
+#endif	/* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 */
 	}
 }
 
-#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 != 1		/* save some spaces */
-/*******************************************************
-* Optimize k8 with UMA.
-* See BKDG_NPT_0F guide for details.
-* The processor node is addressed by its Node ID on the HT link and can be
-* accessed with a device number in the PCI configuration space on Bus0.
-* The Node ID 0 is mapped to Device 24 (0x18), the Node ID 1 is mapped
-* to Device 25, and so on.
-* The processor implements configuration registers in PCI configuration
-* space using the following four headers
-*	Function0: HT technology configuration
-*	Function1: Address map configuration
-*	Function2: DRAM and HT technology Trace mode configuration
-*	Function3: Miscellaneous configuration
-*******************************************************/
-static void k8_optimization(void)
-{
-	device_t k8_f0, k8_f2, k8_f3;
-	msr_t msr;
-
-	printk(BIOS_INFO, "k8_optimization()\n");
-	k8_f0 = PCI_DEV(0, 0x18, 0);
-	k8_f2 = PCI_DEV(0, 0x18, 2);
-	k8_f3 = PCI_DEV(0, 0x18, 3);
-
-	pci_write_config32(k8_f0, 0x90, 0x01700169);	/* CIM NPT_Optimization */
-	set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 28, 0 << 28);
-	set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 26 | 1 << 27,
-			      1 << 26 | 1 << 27);
-	set_nbcfg_enable_bits(k8_f0, 0x68, 1 << 11, 1 << 11);
-	/* set_nbcfg_enable_bits(k8_f0, 0x84, 1 << 11 | 1 << 13 | 1 << 15, 1 << 11 | 1 << 13 | 1 << 15); */	/* TODO */
-
-	pci_write_config32(k8_f3, 0x70, 0x51220111);	/* CIM NPT_Optimization */
-	pci_write_config32(k8_f3, 0x74, 0x50404021);
-	pci_write_config32(k8_f3, 0x78, 0x08002A00);
-	if (pci_read_config32(k8_f3, 0xE8) & 0x3<<12)
-		pci_write_config32(k8_f3, 0x7C, 0x0000211A); /* dual core */
-	else
-		pci_write_config32(k8_f3, 0x7C, 0x0000212B); /* single core */
-	set_nbcfg_enable_bits_8(k8_f3, 0xDC, 0xFF, 0x25);
-
-	set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5);
-	set_nbcfg_enable_bits(k8_f2, 0x94, 0xF << 24, 7 << 24);
-	set_nbcfg_enable_bits(k8_f2, 0x90, 1 << 10, 0 << 10);
-	set_nbcfg_enable_bits(k8_f2, 0xA0, 3 << 2, 3 << 2);
-	set_nbcfg_enable_bits(k8_f2, 0xA0, 1 << 5, 1 << 5);
-
-	msr = rdmsr(0xC001001F);
-	msr.lo &= ~(1 << 9);
-	msr.hi &= ~(1 << 4);
-	wrmsr(0xC001001F, msr);
-}
-#else
-#define k8_optimization() do{}while(0)
-#endif	/* #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 != 1 */
-
-#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1		/* save some spaces */
+#if (CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1) || (CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY10 == 1) /* save some spaces */
 void fam10_optimization(void)
 {
 	device_t cpu_f0, cpu_f2, cpu_f3;
@@ -340,13 +345,12 @@
 	set_nbmisc_enable_bits(nb_dev, 0x2B, 1 << 15 | 1 << 27, 1 << 15 | 1 << 27);
 	set_nbmisc_enable_bits(nb_dev, 0x2C, 1 << 0 | 1 << 1 | 1 << 5 | 1 << 4 | 1 << 10, 1 << 0 | 1 << 1 | 1 << 5);
 	set_nbmisc_enable_bits(nb_dev, 0x32, 0x3F << 20, 0x2A << 20);
-	set_nbmisc_enable_bits(nb_dev, 0x34, 1 << 7 | 1 << 15 | 1 << 23 | 1 << 31, 0); /* bit31 BTS fail */
+	set_nbmisc_enable_bits(nb_dev, 0x34, 1 << 7 | 1 << 15 | 1 << 23, 0);
 	set_nbmisc_enable_bits(nb_dev, 0x35, 0x3F << 26, 0x2A << 26);
 	set_nbmisc_enable_bits(nb_dev, 0x37, 0xfff << 20, 0xddd << 20);
 	set_nbmisc_enable_bits(nb_dev, 0x37, 7 << 11, 0);
 	/* PCIE CDR setting */
 	set_nbmisc_enable_bits(nb_dev, 0x38, 0xFFFFFFFF, 0xC0C0C0);
-	set_nbmisc_enable_bits(nb_dev, 0x39, 1 << 31, 0); /* bit31 BTS fail */
 	set_nbmisc_enable_bits(nb_dev, 0x22, 0xFFFFFFFF, (1 << 27) | (0x8 << 12) | (0x8 << 16) | (0x8 << 20));
 	set_nbmisc_enable_bits(nb_dev, 0x22, 1 << 1 | 1 << 2 | 1 << 6 | 1 << 7, 1 << 1 | 1 << 2 | 1 << 6 | 1 << 7);
 
@@ -381,7 +385,7 @@
 	set_nbmisc_enable_bits(nb_dev, 0x47, 0xFFFFFFFF, 0x0000000B);
 
 	set_nbmisc_enable_bits(nb_dev, 0x12, 0xFFFFFFFF, 0x00FB5555);
-	set_nbmisc_enable_bits(nb_dev, 0x0C, 0xFFFFFFFF, 0x001f37EC);
+	set_nbmisc_enable_bits(nb_dev, 0x0C, 0xFFFFFFFF, 0x001F37FC);
 	set_nbmisc_enable_bits(nb_dev, 0x15, 0xFFFFFFFF, 0x0);
 
 	/* NB_PROG_DEVICE_REMAP */
@@ -478,7 +482,7 @@
 }
 
 /* enable CFG access to Dev8, which is the SB P2P Bridge */
-static void enable_sr5650_dev8(void)
+void enable_sr5650_dev8(void)
 {
 	set_nbmisc_enable_bits(PCI_DEV(0, 0, 0), 0x00, 1 << 6, 1 << 6);
 }
@@ -486,14 +490,14 @@
 /*
 * Compliant with CIM_33's AtiNBInitEarlyPost (AtiInitNBBeforePCIInit).
 */
-static void sr5650_before_pci_init(void)
+void sr5650_before_pci_init(void)
 {
 }
 
 /*
 * The calling sequence is same as CIM.
 */
-static void sr5650_early_setup(void)
+void sr5650_early_setup(void)
 {
 	device_t nb_dev = PCI_DEV(0, 0, 0);
 	printk(BIOS_INFO, "sr5650_early_setup()\n");
@@ -513,28 +517,24 @@
 		break;
 	}
 
-#if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1
-
 	fam10_optimization();
-#else
-	k8_optimization();
-#endif
-
 	sr5650_por_init(nb_dev);
 }
 
 /**
- * @brief disable GPP1 Port0,1, GPP3a Port0,1,2,3,4,5
+ * @brief disable GPP1 Port0,1, GPP2, GPP3a Port0,1,2,3,4,5, GPP3b
  *
  */
-void disable_pcie_bridge(void)
+void sr5650_disable_pcie_bridge(void)
 {
 	u32 mask;
 	u32 reg;
 	device_t nb_dev = PCI_DEV(0, 0, 0);
 
-	mask = (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) |
-			(1 << 16) | (1 << 17);
+	mask = (1 << 2) | (1 << 3); /*GPP1*/
+	mask |= (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) | (1 << 16) | (1 << 17); /*GPP3a*/
+	mask |= (1 << 18) | (1 << 19); /*GPP2*/
+	mask |= (1 << 20); /*GPP3b*/
 	reg = mask;
 	set_nbmisc_enable_bits(nb_dev, 0x0c, mask, reg);
 }
diff --git a/src/southbridge/amd/sr5650/pcie.c b/src/southbridge/amd/sr5650/pcie.c
old mode 100644
new mode 100755
index 3ad5a7d..37743ca
--- a/src/southbridge/amd/sr5650/pcie.c
+++ b/src/southbridge/amd/sr5650/pcie.c
@@ -267,23 +267,25 @@
 }
 
 /*
-*/
+ * GEN2 Software Compliance
+ */
 void init_gen2(device_t nb_dev, device_t dev, u8 port)
 {
 	u32 reg, val;
+
 	/* for A11 (0x89 == 0) */
 	reg = 0x34;
-	if (port <= 3){
+	if (port <= 3) {
 		val = 1<<5;
-	}else{
+	} else {
 		val = 1<<31;
-		if (port >= 9 )
+		if (port >= 9)
 			reg = 0x39;
 	}
 
-	/* todo: check for rev > a11
+	/* TODO: check for rev > a11 */
 	switch (port) {
-		case 2;
+		case 2:
 			reg = 0x34;
 			val = 1<<5;
 			break;
@@ -300,7 +302,9 @@
 			reg = 0x39;
 			val = 1<<31;
 			break;
-		case 7..9:
+		case 7:
+		case 8:
+		case 9:
 			reg = 0x37;
 			val = 1<<port;
 			break;
@@ -312,9 +316,11 @@
 			reg = 0;
 			break;
 	}
-	*/
+
+	/* Enables GEN2 capability of the device */
 	set_pcie_enable_bits(dev, 0xA4, 0x1, 0x1);
-	pci_ext_write_config32(nb_dev, dev, 0x88, 0xF0, 1<<2); /* LINK_CRTL2*/
+	/* Advertise the link speed to be Gen2 */
+	pci_ext_write_config32(nb_dev, dev, 0x88, 0xF0, 1<<2); /* LINK_CRTL2 */
 	set_nbmisc_enable_bits(nb_dev, reg, val, val);
 }
 
@@ -409,7 +415,7 @@
 	}
 }
 
-#if 0				/* BTS report error without this function. But some board
+#if 1				/* BTS report error without this function. But some board
 				 * fail to boot. Leave it here for future debug. */
 
 /*
@@ -424,6 +430,7 @@
 	device_t nb_dev = dev_find_slot(0, 0);
 	device_t clk_f1= dev_find_slot(0, 1);
 
+	reg = 0xE8;
 	port = dev->path.pci.devfn >> 3;
 	switch (port) {
  		//PCIE_CORE_INDEX_GPP1
@@ -436,7 +443,6 @@
  		//PCIE_CORE_INDEX_GPP2
 		case 11:
 		case 12:
-			reg = 0xE8;
 			value = 1 << 28;
 			break;
 
@@ -444,13 +450,11 @@
 		case 4 ... 7:
 		case 9:
 		case 10:
-			reg = 0xE8;
 			value = 1 << 31;
 			break;
 
 		//PCIE_CORE_INDEX_GPP3b;
 		case 13:
-			reg = 0xE8;
 			value = 1 << 25;
 			break;
 
@@ -541,6 +545,14 @@
 	/* 4.4.2.step13.6. Set REGS_LC_ALLOW_TX_L1_CONTROL to allow TX to
 	   prevent LC from going to L1 when there are outstanding completions.*/
 	set_pcie_enable_bits(dev, 0x02, 1 << 15, 1 << 15);
+
+	/* Enables the PLL power down when all lanes are inactive.
+	 * It should be on in GPP.
+	 */
+	if (gpp_sb_sel == PCIE_CORE_INDEX_GPP3a || gpp_sb_sel == PCIE_CORE_INDEX_GPP3b || gpp_sb_sel == PCIE_CORE_INDEX_SB) {
+		set_pcie_enable_bits(nb_dev, 0x02 | gpp_sb_sel, 1 << 3, 1 << 3);
+	}
+
 	/* 4.4.2.step13.7. Set REGS_LC_DONT_GO_TO_L0S_IF_L1_ARMED to prevent
 	   lc to go to from L0 to Rcv_L0s if L1 is armed. */
 	set_pcie_enable_bits(dev, 0xA1, 1 << 11, 1 << 11);
@@ -594,8 +606,11 @@
 	 * RPR typo- it says enable but the bit setting says disable.
 	 * Disable it here and we enable it later. */
 	set_pcie_enable_bits(dev, 0xA4, 1 << 0, 1 << 0);
-	/* 4.4.2.step13.21. */
-	/* 4.4.2.step13.22 */
+
+	/* 4.4.2.step13.21. Legacy Hot Plug  -CMOS Option */
+	/* NOTE: This feature can be enabled only for Hot-Plug slots implemented on SR5690 platform. */
+
+	/* 4.4.2.step13.22. Native PCIe Mode -CMOS Option */
 	/* Enable native PME. */
 	set_pcie_enable_bits(dev, 0x10, 1 << 3, 1 < 3);
 	/* This bit when set indicates that the PCIe Link associated with this port
@@ -607,7 +622,7 @@
 	/* Enables flushing of TLPs when Data Link is down. */
 	set_pcie_enable_bits(dev, 0x20, 1 << 19, 0 << 19);
 
-	/* 4.4.2.step14. Server Class Hot Plug Feature */
+	/* 4.4.2.step14. Server Class Hot Plug Feature. NOTE: This feature is not supported on SR5670 and SR5650 */
 	/* 4.4.2 step14.1: Advertising Hot Plug Capabilities */
 	/* 4.4.2.step14.2: Firmware Upload */
 	/* 4.4.2.Step14.3: SBIOS Acknowledgment to Firmware of Successful Firmware Upload */
@@ -630,11 +645,13 @@
 	if ( port == 8 )
 		set_pcie_enable_bits(dev, 0xA0, 0, 1 << 23);
 
+#if 0 //SR56x0 pcie Gen2 code is not tested yet, we should enable it again when test finished.
 	/* set automatic Gen2 support, needs mainboard config option as Gen2 can cause issues on some platforms. */
 	init_gen2(nb_dev, dev, port);
 	set_pcie_enable_bits(dev, 0xA4, 1 << 29, 1 << 29);
 	set_pcie_enable_bits(dev, 0xC0, 1 << 15, 0);
 	set_pcie_enable_bits(dev, 0xA2, 1 << 13, 0);
+#endif
 
 	/* Hotplug Support - bit5 + bit6  capable and surprise */
 	pci_ext_write_config32(nb_dev, dev, 0x6c, 0x60, 0x60);
@@ -715,12 +732,13 @@
 	/* 4.4..7.1 TXCLK Gating in L1, Enables powering down TXCLK clock pads on the receive side. */
 	set_pcie_enable_bits(nb_dev, 0x40 | gpp_sb_sel, 1 << 6, 1 << 6);
 
-	/* Step 21: Register Locking PCIE Misc. Late Core sttting - Must move somewhere do PciInitLate FIXME */
-	/* Lock HWInit Register */
-	//set_pcie_enable_bits(nb_dev, 0x10 | gpp_sb_sel, 1 << 0, 1 << 0);
+	/* Step 20: Disables immediate RCB timeout on link down */
+	if (!((pci_read_config32(dev, 0x6C ) >> 6) & 0x01)) {
+		set_pcie_enable_bits(dev, 0x70, 1 << 19, 0 << 19);
+	}
 
 	/* Step 27: LCLK Gating	*/
-	//EnableLclkGating(dev);
+	EnableLclkGating(dev);
 
 	/* Set Common Clock */
 	/* If dev present, set PcieCapPtr+0x10, BIT6);
@@ -734,6 +752,34 @@
 	}
 }
 
+/**
+ * Step 21: Register Locking
+ * Lock HWInit Register of each pcie core
+ */
+static void lock_hwinitreg(device_t nb_dev)
+{
+	/* Step 21: Register Locking, Lock HWInit Register */
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPP1, 1 << 0, 1 << 0);
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_SB, 1 << 0, 1 << 0);
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPP2, 1 << 0, 1 << 0);
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPP3a, 1 << 0, 1 << 0);
+	set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPP3b, 1 << 0, 1 << 0);
+}
+
+/**
+ * Lock HWInit Register
+ */
+void sr56x0_lock_hwinitreg(void)
+{
+	device_t nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+
+	/* Lock HWInit Register */
+	lock_hwinitreg(nb_dev);
+
+	/* Lock HWInit Register NBMISCIND:0x0 NBCNTL[7] HWINIT_WR_LOCK */
+	set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 7, 1 << 7);
+}
+
 /*****************************************
 * Compliant with CIM_33's PCIEConfigureGPPCore
 *****************************************/
diff --git a/src/southbridge/amd/sr5650/sr5650.c b/src/southbridge/amd/sr5650/sr5650.c
old mode 100644
new mode 100755
index 616ca44..14b919d
--- a/src/southbridge/amd/sr5650/sr5650.c
+++ b/src/southbridge/amd/sr5650/sr5650.c
@@ -266,15 +266,21 @@
 }
 
 /*
-* Compliant with CIM_33's ATINB_SetToms.
-* Set Top Of Memory below and above 4G.
-*/
+ * Set Top Of Memory below and above 4G.
+ */
 void sr5650_set_tom(device_t nb_dev)
 {
-	extern u64 uma_memory_base;
+	msr_t sysmem;
 
-	/* set TOM */
-	pci_write_config32(nb_dev, 0x90, uma_memory_base);
+	/* The system top memory in SR56X0. */
+	sysmem = rdmsr(0xc001001A);
+	printk(BIOS_DEBUG, "Sysmem TOM = %x_%x\n", sysmem.hi, sysmem.lo);
+	pci_write_config32(nb_dev, 0x90, sysmem.lo);
+
+	sysmem = rdmsr(0xc001001D);
+	printk(BIOS_DEBUG, "Sysmem TOM2 = %x_%x\n", sysmem.hi, sysmem.lo);
+	htiu_write_index(nb_dev, 0x31, sysmem.hi);
+	htiu_write_index(nb_dev, 0x30, sysmem.lo | 1);
 }
 
 u32 get_vid_did(device_t dev)
@@ -308,7 +314,7 @@
 	temp8 &= ~(1<<1);
 	pci_write_config8(nb_dev, 0x8d, temp8);
 
-	/* set temporary NB TOM to 0x40000000. */
+	/* The system top memory in SR56X0. */
 	sr5650_set_tom(nb_dev);
 
 	/* Program NB HTIU table. */
@@ -424,6 +430,11 @@
 	default:
 		printk(BIOS_DEBUG, "unknown dev: %s\n", dev_path(dev));
 	}
+
+	/* Lock HWInit Register after the last device was done */
+	if (dev_ind == 13) {
+		sr56x0_lock_hwinitreg();
+	}
 }
 
 struct chip_operations southbridge_amd_sr5650_ops = {
diff --git a/src/southbridge/amd/sr5650/sr5650.h b/src/southbridge/amd/sr5650/sr5650.h
old mode 100644
new mode 100755
index 5da3544..1b5112b
--- a/src/southbridge/amd/sr5650/sr5650.h
+++ b/src/southbridge/amd/sr5650/sr5650.h
@@ -103,6 +103,10 @@
 void enable_pcie_bar3(device_t nb_dev);
 void disable_pcie_bar3(device_t nb_dev);
 
+void enable_sr5650_dev8(void);
+void sr5650_htinit(void);
+void sr5650_early_setup(void);
+void sr5650_before_pci_init(void);
 void sr5650_enable(device_t dev);
 void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port);
 void sr5650_gfx_init(device_t nb_dev, device_t dev, u32 port);
@@ -112,8 +116,9 @@
 u8 PcieTrainPort(device_t nb_dev, device_t dev, u32 port);
 void pcie_config_misc_clk(device_t nb_dev);
 void fam10_optimization(void);
-void disable_pcie_bridge(void);
+void sr5650_disable_pcie_bridge(void);
 u32 get_vid_did(device_t dev);
 void sr5650_nb_pci_table(device_t nb_dev);
 void init_gen2(device_t nb_dev, device_t dev, u8 port);
+void sr56x0_lock_hwinitreg(void);
 #endif /* SR5650_H */
diff --git a/src/superio/nuvoton/wpcm450/Makefile.inc b/src/superio/nuvoton/wpcm450/Makefile.inc
index dc7ed36..c70b2fb 100644
--- a/src/superio/nuvoton/wpcm450/Makefile.inc
+++ b/src/superio/nuvoton/wpcm450/Makefile.inc
@@ -18,5 +18,6 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##
 
+romstage-y += early_init.c
 ramstage-$(CONFIG_SUPERIO_NUVOTON_WPCM450) += superio.c
 
diff --git a/src/superio/nuvoton/wpcm450/early_init.c b/src/superio/nuvoton/wpcm450/early_init.c
old mode 100644
new mode 100755
index eb80c94..94bef02
--- a/src/superio/nuvoton/wpcm450/early_init.c
+++ b/src/superio/nuvoton/wpcm450/early_init.c
@@ -18,7 +18,9 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
+#include <arch/io.h>
 #include <arch/romcc_io.h>
+#include <device/pnp_def.h>
 #include "wpcm450.h"
 
 static void wpcm450_pnp_set_logical_device(u8 dev, u16 port)
@@ -41,7 +43,7 @@
 	outb(iobase&0xFF, port+1);
 }
 
-static void wpcm450_enable_dev(u8 dev, u16 port, u16 iobase)
+void wpcm450_enable_dev(u8 dev, u16 port, u16 iobase)
 {
 	wpcm450_pnp_set_logical_device(dev, port);
 	wpcm450_pnp_set_enable(dev, port, 0);
diff --git a/src/superio/nuvoton/wpcm450/wpcm450.h b/src/superio/nuvoton/wpcm450/wpcm450.h
old mode 100644
new mode 100755
index bf50c853..46f3cc5
--- a/src/superio/nuvoton/wpcm450/wpcm450.h
+++ b/src/superio/nuvoton/wpcm450/wpcm450.h
@@ -25,4 +25,6 @@
 #define WPCM450_SP1  0x03 /* Com1 */
 #define WPCM450_KBCK 0x06 /* Keyboard */
 
+void wpcm450_enable_dev(u8 dev, u16 port, u16 iobase);
+
 #endif
diff --git a/src/vendorcode/amd/agesa/f14/Lib/amdlib.c b/src/vendorcode/amd/agesa/f14/Lib/amdlib.c
index c3364d3..3fc5112 100644
--- a/src/vendorcode/amd/agesa/f14/Lib/amdlib.c
+++ b/src/vendorcode/amd/agesa/f14/Lib/amdlib.c
@@ -551,8 +551,8 @@
   IN OUT   AMD_CONFIG_PARAMS *StdHeader
   )
 {
-  UINT32  TempData;
-  UINT32  TempMask;
+  UINT32  TempData = 0;
+  UINT32  TempMask = 0;
   UINT32  Value;
   LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
   LibAmdIoRead (AccessWidth, IoAddress, &Value, StdHeader);
@@ -584,8 +584,8 @@
   IN OUT   AMD_CONFIG_PARAMS *StdHeader
   )
 {
-  UINT32  TempData;
-  UINT32  TempMask;
+  UINT32  TempData = 0;
+  UINT32  TempMask = 0;
   UINT32  Value;
   LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
   do {
@@ -688,8 +688,8 @@
   IN OUT   AMD_CONFIG_PARAMS *StdHeader
   )
 {
-  UINT32  TempData;
-  UINT32  TempMask;
+  UINT32  TempData = 0;
+  UINT32  TempMask = 0;
   UINT32  Value;
   LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
   LibAmdMemRead (AccessWidth, MemAddress, &Value, StdHeader);
@@ -721,8 +721,8 @@
   IN OUT   AMD_CONFIG_PARAMS *StdHeader
   )
 {
-  UINT32  TempData;
-  UINT32  TempMask;
+  UINT32  TempData = 0;
+  UINT32  TempMask = 0;
   UINT32  Value;
   LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
   do {
@@ -849,8 +849,8 @@
   IN OUT   AMD_CONFIG_PARAMS *StdHeader
   )
 {
-  UINT32  TempData;
-  UINT32  TempMask;
+  UINT32  TempData = 0;
+  UINT32  TempMask = 0;
   UINT32  Value;
   LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
   LibAmdPciRead (AccessWidth, PciAddress, &Value, StdHeader);
@@ -882,8 +882,8 @@
   IN OUT   AMD_CONFIG_PARAMS *StdHeader
   )
 {
-  UINT32  TempData;
-  UINT32  TempMask;
+  UINT32  TempData = 0;
+  UINT32  TempMask = 0;
   UINT32  Value;
   LibAmdGetDataFromPtr (AccessWidth, Data,  DataMask, &TempData, &TempMask);
   do {