blob: 1fb97b659e115d206761c4be631424b8f6033393 [file] [log] [blame]
Michał Żygowski4ddde052019-12-04 12:06:39 +01001[ 0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)
2[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=17ed7bcd-6b74-425d-baf6-c79db7db2a14 ro console=ttyS0,115200 earlyprint=serial,ttyS0,115200 initrd=http://ftp.nl.debian.org/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/initrd.gz quiet
3[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
4[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
5[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
6[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
7[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
8[ 0.000000] BIOS-provided physical RAM map:
9[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
10[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfea4fff] usable
13[ 0.000000] BIOS-e820: [mem 0x00000000dfea5000-0x00000000dfffffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
16[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
17[ 0.000000] NX (Execute Disable) protection: active
18[ 0.000000] SMBIOS 2.8 present.
19[ 0.000000] DMI: PC Engines apu2/apu2, BIOS 4.11-268-gb6161be9de 12/03/2019
20[ 0.000000] tsc: Fast TSC calibration using PIT
21[ 0.000000] tsc: Detected 998.192 MHz processor
22[ 0.001443] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23[ 0.001453] e820: remove [mem 0x000a0000-0x000fffff] usable
24[ 0.001469] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
25[ 0.001483] MTRR default type: uncachable
26[ 0.001486] MTRR fixed ranges enabled:
27[ 0.001491] 00000-9FFFF write-back
28[ 0.001494] A0000-BFFFF uncachable
29[ 0.001498] C0000-FFFFF write-back
30[ 0.001501] MTRR variable ranges enabled:
31[ 0.001506] 0 base 00FF800000 mask FFFF800000 write-protect
32[ 0.001512] 1 base 00C0000000 mask FFE0000000 write-back
33[ 0.001516] 2 base 0080000000 mask FFC0000000 write-back
34[ 0.001520] 3 base 0000000000 mask FF80000000 write-back
35[ 0.001523] 4 disabled
36[ 0.001525] 5 disabled
37[ 0.001527] 6 disabled
38[ 0.001529] 7 disabled
39[ 0.001532] TOM2: 000000011f000000 aka 4592M
40[ 0.002663] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
41[ 0.002870] last_pfn = 0xdfea5 max_arch_pfn = 0x400000000
42[ 0.011943] found SMP MP-table at [mem 0x000f6080-0x000f608f]
43[ 0.012216] Using GB pages for direct mapping
44[ 0.012223] BRK [0x57401000, 0x57401fff] PGTABLE
45[ 0.012231] BRK [0x57402000, 0x57402fff] PGTABLE
46[ 0.012235] BRK [0x57403000, 0x57403fff] PGTABLE
47[ 0.012378] BRK [0x57404000, 0x57404fff] PGTABLE
48[ 0.012388] BRK [0x57405000, 0x57405fff] PGTABLE
49[ 0.012697] BRK [0x57406000, 0x57406fff] PGTABLE
50[ 0.012873] BRK [0x57407000, 0x57407fff] PGTABLE
51[ 0.013428] RAMDISK: [mem 0x34ec9000-0x3675bfff]
52[ 0.013445] ACPI: Early table checksum verification disabled
53[ 0.013615] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4)
54[ 0.013627] ACPI: XSDT 0x00000000DFEA60E0 00006C (v01 COREv4 COREBOOT 00000000 CORE 20180531)
55[ 0.013646] ACPI: FACP 0x00000000DFEA7960 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180531)
56[ 0.013666] ACPI: DSDT 0x00000000DFEA6280 0016DA (v02 COREv4 COREBOOT 00010001 INTL 20180531)
57[ 0.013679] ACPI: FACS 0x00000000DFEA6240 000040
58[ 0.013688] ACPI: SSDT 0x00000000DFEA7A60 0001EA (v02 COREv4 COREBOOT 0000002A CORE 20180531)
59[ 0.013700] ACPI: MCFG 0x00000000DFEA7C50 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180531)
60[ 0.013712] ACPI: APIC 0x00000000DFEA7C90 00007E (v02 COREv4 COREBOOT 00000000 CORE 20180531)
61[ 0.013723] ACPI: HEST 0x00000000DFEA7D10 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
62[ 0.013734] ACPI: IVRS 0x00000000DFEA7EE0 000108 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
63[ 0.013746] ACPI: SSDT 0x00000000DFEA7FF0 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
64[ 0.013757] ACPI: SSDT 0x00000000DFEAC8A0 0007C8 (v01 AMD AGESA 00000001 AMD 00000001)
65[ 0.013768] ACPI: HPET 0x00000000DFEAD070 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
66[ 0.013798] ACPI: Local APIC address 0xfee00000
67[ 0.014066] No NUMA configuration found
68[ 0.014069] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
69[ 0.014082] NODE_DATA(0) allocated [mem 0x11effb000-0x11effffff]
70[ 0.014179] Zone ranges:
71[ 0.014182] DMA [mem 0x0000000000001000-0x0000000000ffffff]
72[ 0.014187] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
73[ 0.014191] Normal [mem 0x0000000100000000-0x000000011effffff]
74[ 0.014195] Device empty
75[ 0.014198] Movable zone start for each node
76[ 0.014200] Early memory node ranges
77[ 0.014203] node 0: [mem 0x0000000000001000-0x000000000009efff]
78[ 0.014206] node 0: [mem 0x0000000000100000-0x00000000dfea4fff]
79[ 0.014208] node 0: [mem 0x0000000100000000-0x000000011effffff]
80[ 0.014221] Reserved but unavailable: 98 pages
81[ 0.014227] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
82[ 0.014231] On node 0 totalpages: 1044035
83[ 0.014235] DMA zone: 64 pages used for memmap
84[ 0.014237] DMA zone: 21 pages reserved
85[ 0.014240] DMA zone: 3998 pages, LIFO batch:0
86[ 0.014650] DMA32 zone: 14267 pages used for memmap
87[ 0.014653] DMA32 zone: 913061 pages, LIFO batch:63
88[ 0.109998] Normal zone: 1984 pages used for memmap
89[ 0.110008] Normal zone: 126976 pages, LIFO batch:31
90[ 0.123095] ACPI: PM-Timer IO Port: 0x818
91[ 0.123109] ACPI: Local APIC address 0xfee00000
92[ 0.123130] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
93[ 0.123152] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
94[ 0.123162] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
95[ 0.123168] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
96[ 0.123174] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
97[ 0.123178] ACPI: IRQ0 used by override.
98[ 0.123181] ACPI: IRQ9 used by override.
99[ 0.123187] Using ACPI (MADT) for SMP configuration information
100[ 0.123192] ACPI: HPET id: 0x10228201 base: 0xfed00000
101[ 0.123211] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
102[ 0.123250] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
103[ 0.123255] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
104[ 0.123258] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
105[ 0.123260] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
106[ 0.123265] PM: Registered nosave memory: [mem 0xdfea5000-0xdfffffff]
107[ 0.123267] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
108[ 0.123270] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
109[ 0.123272] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
110[ 0.123274] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
111[ 0.123277] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
112[ 0.123283] [mem 0xe0000000-0xf7ffffff] available for PCI devices
113[ 0.123286] Booting paravirtualized kernel on bare hardware
114[ 0.123296] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
115[ 0.544637] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
116[ 0.544677] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
117[ 0.546096] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u524288
118[ 0.546127] pcpu-alloc: s144408 r8192 d31720 u524288 alloc=1*2097152
119[ 0.546132] pcpu-alloc: [0] 0 1 2 3
120[ 0.546207] Built 1 zonelists, mobility grouping on. Total pages: 1027699
121[ 0.546210] Policy zone: Normal
122[ 0.546218] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=17ed7bcd-6b74-425d-baf6-c79db7db2a14 ro console=ttyS0,115200 earlyprint=serial,ttyS0,115200 initrd=http://ftp.nl.debian.org/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/initrd.gz quiet
123[ 0.580923] Calgary: detecting Calgary via BIOS EBDA area
124[ 0.580932] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
125[ 0.634036] Memory: 3993912K/4176140K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 182228K reserved, 0K cma-reserved)
126[ 0.634403] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
127[ 0.634430] ftrace: allocating 31872 entries in 125 pages
128[ 0.681987] rcu: Hierarchical RCU implementation.
129[ 0.681995] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
130[ 0.681999] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
131[ 0.696746] NR_IRQS: 33024, nr_irqs: 1000, preallocated irqs: 16
132[ 0.697176] spurious 8259A interrupt: IRQ7.
133[ 0.697516] Console: colour dummy device 80x25
134[ 0.697558] console [ttyS0] enabled
135[ 0.697614] ACPI: Core revision 20180810
136[ 0.698119] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
137[ 0.698143] hpet clockevent registered
138[ 0.698158] APIC: Switch to symmetric I/O mode setup
139[ 0.766483] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
140[ 0.786152] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc6d6491d9, max_idle_ns: 881590450975 ns
141[ 0.786207] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.38 BogoMIPS (lpj=3992768)
142[ 0.786216] pid_max: default: 32768 minimum: 301
143[ 0.786325] Security Framework initialized
144[ 0.786329] Yama: disabled by default; enable with sysctl kernel.yama.*
145[ 0.786386] AppArmor: AppArmor initialized
146[ 0.788987] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
147[ 0.790428] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
148[ 0.790555] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
149[ 0.790601] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
150[ 0.791385] LVT offset 1 assigned for vector 0xf9
151[ 0.791398] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
152[ 0.791401] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
153[ 0.791406] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
154[ 0.791414] Spectre V2 : Mitigation: Full AMD retpoline
155[ 0.791416] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
156[ 0.791422] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
157[ 0.815173] Freeing SMP alternatives memory: 24K
158[ 0.822158] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
159[ 0.822158] Performance Events: AMD PMU driver.
160[ 0.822158] ... version: 0
161[ 0.822158] ... bit width: 48
162[ 0.822158] ... generic registers: 4
163[ 0.822158] ... value mask: 0000ffffffffffff
164[ 0.822158] ... max period: 00007fffffffffff
165[ 0.822158] ... fixed-purpose events: 0
166[ 0.822158] ... event mask: 000000000000000f
167[ 0.822158] rcu: Hierarchical SRCU implementation.
168[ 0.822158] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
169[ 0.822158] smp: Bringing up secondary CPUs ...
170[ 0.822158] x86: Booting SMP configuration:
171[ 0.822158] .... node #0, CPUs: #1
172[ 0.069038] do_IRQ: 1.55 No irq handler for vector
173[ 0.826616] #2
174[ 0.069038] do_IRQ: 2.55 No irq handler for vector
175[ 0.834635] #3
176[ 0.069038] do_IRQ: 3.55 No irq handler for vector
177[ 0.842330] smp: Brought up 1 node, 4 CPUs
178[ 0.842330] smpboot: Max logical packages: 1
179[ 0.842330] smpboot: Total of 4 processors activated (7985.53 BogoMIPS)
180[ 0.847152] devtmpfs: initialized
181[ 0.847152] x86/mm: Memory block size: 128MB
182[ 0.848144] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
183[ 0.850178] futex hash table entries: 1024 (order: 4, 65536 bytes)
184[ 0.850390] pinctrl core: initialized pinctrl subsystem
185[ 0.851054] NET: Registered protocol family 16
186[ 0.851434] audit: initializing netlink subsys (disabled)
187[ 0.851455] audit: type=2000 audit(1575457429.088:1): state=initialized audit_enabled=0 res=1
188[ 0.851455] cpuidle: using governor ladder
189[ 0.851455] cpuidle: using governor menu
190[ 0.851455] ACPI: bus type PCI registered
191[ 0.851455] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
192[ 0.851455] PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xf8000000-0xfc0fffff] (base 0xf8000000)
193[ 0.851455] PCI: MMCONFIG at [mem 0xf8000000-0xfc0fffff] reserved in E820
194[ 0.851455] PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000) (size reduced!)
195[ 0.851455] PCI: Using configuration type 1 for base access
196[ 0.851455] mtrr: your CPUs had inconsistent variable MTRR settings
197[ 0.851455] mtrr: probably your BIOS does not setup all CPUs.
198[ 0.851455] mtrr: corrected configuration.
199[ 0.856155] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
200[ 0.856155] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
201[ 0.856155] ACPI: Added _OSI(Module Device)
202[ 0.856155] ACPI: Added _OSI(Processor Device)
203[ 0.856155] ACPI: Added _OSI(3.0 _SCP Extensions)
204[ 0.856155] ACPI: Added _OSI(Processor Aggregator Device)
205[ 0.856155] ACPI: Added _OSI(Linux-Dell-Video)
206[ 0.856155] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
207[ 0.871732] ACPI: 4 ACPI AML tables successfully acquired and loaded
208[ 0.881740] ACPI: Interpreter enabled
209[ 0.881794] ACPI: (supports S0 S1 S4 S5)
210[ 0.881798] ACPI: Using IOAPIC for interrupt routing
211[ 0.881838] HEST: Table parsing has been initialized.
212[ 0.881847] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
213[ 0.882382] ACPI: Enabled 7 GPEs in block 00 to 1F
214[ 0.891717] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
215[ 0.891733] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
216[ 0.891889] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
217[ 0.891919] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
218[ 0.892048] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
219[ 0.892546] PCI host bridge to bus 0000:00
220[ 0.892553] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
221[ 0.892558] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
222[ 0.892563] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
223[ 0.892568] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
224[ 0.892572] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
225[ 0.892578] pci_bus 0000:00: root bus resource [bus 00-ff]
226[ 0.892600] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
227[ 0.892886] pci 0000:00:00.2: [1022:1567] type 00 class 0x080600
228[ 0.893177] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
229[ 0.893436] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
230[ 0.893497] pci 0000:00:02.2: enabling Extended Tags
231[ 0.893573] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
232[ 0.893830] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
233[ 0.893890] pci 0000:00:02.3: enabling Extended Tags
234[ 0.893964] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
235[ 0.894254] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
236[ 0.894313] pci 0000:00:02.4: enabling Extended Tags
237[ 0.894387] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
238[ 0.894645] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
239[ 0.894674] pci 0000:00:08.0: reg 0x10: [mem 0xf7f80000-0xf7f9ffff 64bit pref]
240[ 0.894686] pci 0000:00:08.0: reg 0x18: [mem 0xf7d00000-0xf7dfffff]
241[ 0.894697] pci 0000:00:08.0: reg 0x1c: [mem 0xf7fa4000-0xf7fa4fff]
242[ 0.894708] pci 0000:00:08.0: reg 0x20: [mem 0xf7e00000-0xf7efffff]
243[ 0.894719] pci 0000:00:08.0: reg 0x24: [mem 0xf7fa0000-0xf7fa1fff]
244[ 0.894980] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
245[ 0.895020] pci 0000:00:10.0: reg 0x10: [mem 0xf7fa2000-0xf7fa3fff 64bit]
246[ 0.895163] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
247[ 0.895415] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
248[ 0.895445] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
249[ 0.895459] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
250[ 0.895472] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
251[ 0.895485] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
252[ 0.895499] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
253[ 0.895512] pci 0000:00:11.0: reg 0x24: [mem 0xf7fa5000-0xf7fa53ff]
254[ 0.895548] pci 0000:00:11.0: set SATA to AHCI mode
255[ 0.895588] pci 0000:00:11.0: PME# supported from D3hot
256[ 0.895809] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
257[ 0.895839] pci 0000:00:13.0: reg 0x10: [mem 0xf7fa6000-0xf7fa60ff]
258[ 0.895946] pci 0000:00:13.0: supports D1 D2
259[ 0.895950] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
260[ 0.896179] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
261[ 0.896471] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
262[ 0.896798] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
263[ 0.896829] pci 0000:00:14.7: reg 0x10: [mem 0xf7fa7000-0xf7fa70ff 64bit]
264[ 0.897108] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
265[ 0.897339] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
266[ 0.897559] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
267[ 0.897808] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
268[ 0.898040] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
269[ 0.898276] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
270[ 0.898640] pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
271[ 0.898688] pci 0000:01:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff]
272[ 0.898722] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f]
273[ 0.898742] pci 0000:01:00.0: reg 0x1c: [mem 0xf7a20000-0xf7a23fff]
274[ 0.898916] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
275[ 0.899144] pci 0000:00:02.2: PCI bridge to [bus 01]
276[ 0.899155] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
277[ 0.899162] pci 0000:00:02.2: bridge window [mem 0xf7a00000-0xf7afffff]
278[ 0.899319] pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
279[ 0.899367] pci 0000:02:00.0: reg 0x10: [mem 0xf7b00000-0xf7b1ffff]
280[ 0.899402] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f]
281[ 0.899421] pci 0000:02:00.0: reg 0x1c: [mem 0xf7b20000-0xf7b23fff]
282[ 0.899596] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
283[ 0.899806] pci 0000:00:02.3: PCI bridge to [bus 02]
284[ 0.899816] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
285[ 0.899823] pci 0000:00:02.3: bridge window [mem 0xf7b00000-0xf7bfffff]
286[ 0.899956] pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
287[ 0.900005] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
288[ 0.900040] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
289[ 0.900059] pci 0000:03:00.0: reg 0x1c: [mem 0xf7c20000-0xf7c23fff]
290[ 0.900284] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
291[ 0.900500] pci 0000:00:02.4: PCI bridge to [bus 03]
292[ 0.900510] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
293[ 0.900516] pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
294[ 0.901069] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
295[ 0.901234] ACPI: PCI Interrupt Link [INTB] (IRQs *3 4 5 7 10 11 12 15)
296[ 0.901394] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
297[ 0.901554] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
298[ 0.901712] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
299[ 0.901869] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
300[ 0.902022] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
301[ 0.902194] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
302[ 0.902743] vgaarb: loaded
303[ 0.902743] pps_core: LinuxPPS API ver. 1 registered
304[ 0.902743] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
305[ 0.902743] PTP clock support registered
306[ 0.902743] EDAC MC: Ver: 3.0.0
307[ 0.902743] PCI: Using ACPI for IRQ routing
308[ 0.902918] PCI: pci_cache_line_size set to 64 bytes
309[ 0.903003] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
310[ 0.903008] e820: reserve RAM buffer [mem 0xdfea5000-0xdfffffff]
311[ 0.903011] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
312[ 0.903459] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
313[ 0.903459] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
314[ 0.906196] clocksource: Switched to clocksource tsc-early
315[ 0.946984] VFS: Disk quotas dquot_6.6.0
316[ 0.947042] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
317[ 0.947447] AppArmor: AppArmor Filesystem Enabled
318[ 0.947514] pnp: PnP ACPI init
319[ 0.948107] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
320[ 0.948127] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
321[ 0.948221] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
322[ 0.948721] pnp: PnP ACPI: found 2 devices
323[ 0.959996] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
324[ 0.960058] pci 0000:00:02.2: PCI bridge to [bus 01]
325[ 0.960066] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
326[ 0.960075] pci 0000:00:02.2: bridge window [mem 0xf7a00000-0xf7afffff]
327[ 0.960088] pci 0000:00:02.3: PCI bridge to [bus 02]
328[ 0.960093] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
329[ 0.960101] pci 0000:00:02.3: bridge window [mem 0xf7b00000-0xf7bfffff]
330[ 0.960113] pci 0000:00:02.4: PCI bridge to [bus 03]
331[ 0.960118] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
332[ 0.960125] pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
333[ 0.960142] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
334[ 0.960147] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
335[ 0.960152] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
336[ 0.960156] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
337[ 0.960161] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
338[ 0.960166] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
339[ 0.960170] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
340[ 0.960175] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
341[ 0.960179] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
342[ 0.960183] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
343[ 0.960187] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
344[ 0.960332] NET: Registered protocol family 2
345[ 0.960965] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
346[ 0.961028] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
347[ 0.961280] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
348[ 0.961603] TCP: Hash tables configured (established 32768 bind 32768)
349[ 0.961754] UDP hash table entries: 2048 (order: 4, 65536 bytes)
350[ 0.961834] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
351[ 0.962041] NET: Registered protocol family 1
352[ 0.962057] NET: Registered protocol family 44
353[ 0.963005] pci 0000:00:13.0: PME# does not work under D3, disabling it
354[ 0.963088] PCI: CLS 64 bytes, default 64
355[ 0.963255] Unpacking initramfs...
356[ 2.463652] Freeing initrd memory: 25164K
357[ 2.463864] AMD-Vi: IOMMU performance counters supported
358[ 2.464219] pci 0000:00:00.2: can't derive routing for PCI INT A
359[ 2.464224] pci 0000:00:00.2: PCI INT A: no GSI
360[ 2.464771] iommu: Adding device 0000:00:00.0 to group 0
361[ 2.465025] iommu: Adding device 0000:00:02.0 to group 1
362[ 2.465068] iommu: Adding device 0000:00:02.2 to group 1
363[ 2.465109] iommu: Adding device 0000:00:02.3 to group 1
364[ 2.465148] iommu: Adding device 0000:00:02.4 to group 1
365[ 2.465330] iommu: Adding device 0000:00:08.0 to group 2
366[ 2.465574] iommu: Adding device 0000:00:10.0 to group 3
367[ 2.465766] iommu: Adding device 0000:00:11.0 to group 4
368[ 2.465977] iommu: Adding device 0000:00:13.0 to group 5
369[ 2.466271] iommu: Adding device 0000:00:14.0 to group 6
370[ 2.466322] iommu: Adding device 0000:00:14.3 to group 6
371[ 2.466364] iommu: Adding device 0000:00:14.7 to group 6
372[ 2.466681] iommu: Adding device 0000:00:18.0 to group 7
373[ 2.466725] iommu: Adding device 0000:00:18.1 to group 7
374[ 2.466767] iommu: Adding device 0000:00:18.2 to group 7
375[ 2.466838] iommu: Adding device 0000:00:18.3 to group 7
376[ 2.466880] iommu: Adding device 0000:00:18.4 to group 7
377[ 2.466929] iommu: Adding device 0000:00:18.5 to group 7
378[ 2.466962] iommu: Adding device 0000:01:00.0 to group 1
379[ 2.466995] iommu: Adding device 0000:02:00.0 to group 1
380[ 2.467028] iommu: Adding device 0000:03:00.0 to group 1
381[ 2.467061] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
382[ 2.467063] AMD-Vi: Extended features (0x800290ad2):
383[ 2.467066] PPR GT IA GA PC GA_vAPIC
384[ 2.467075] AMD-Vi: Interrupt remapping enabled
385[ 2.467454] AMD-Vi: Lazy IO/TLB flushing enabled
386[ 2.473757] amd_uncore: AMD NB counters detected
387[ 2.473767] amd_uncore: AMD LLC counters detected
388[ 2.474249] LVT offset 0 assigned for vector 0x400
389[ 2.474391] perf: AMD IBS detected (0x000000ff)
390[ 2.474406] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
391[ 2.476846] Initialise system trusted keyrings
392[ 2.476878] Key type blacklist registered
393[ 2.477125] workingset: timestamp_bits=40 max_order=20 bucket_order=0
394[ 2.482691] zbud: loaded
395[ 3.175254] Key type asymmetric registered
396[ 3.175260] Asymmetric key parser 'x509' registered
397[ 3.175338] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
398[ 3.175524] io scheduler noop registered
399[ 3.175527] io scheduler deadline registered
400[ 3.175706] io scheduler cfq registered (default)
401[ 3.175709] io scheduler mq-deadline registered
402[ 3.177612] pcieport 0000:00:02.2: Signaling PME with IRQ 26
403[ 3.177664] pcieport 0000:00:02.3: Signaling PME with IRQ 28
404[ 3.177718] pcieport 0000:00:02.4: Signaling PME with IRQ 30
405[ 3.177835] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
406[ 3.179150] GHES: Failed to enable APEI firmware first mode.
407[ 3.179420] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
408[ 3.200030] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
409[ 3.220749] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
410[ 3.241474] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
411[ 3.262192] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
412[ 3.262795] Linux agpgart interface v0.103
413[ 3.263337] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
414[ 3.264591] i8042: PNP: No PS/2 controller found.
415[ 3.264843] mousedev: PS/2 mouse device common for all mice
416[ 3.264943] rtc_cmos 00:01: RTC can wake from S4
417[ 3.265226] rtc_cmos 00:01: registered as rtc0
418[ 3.265285] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
419[ 3.265512] ledtrig-cpu: registered to indicate activity on CPUs
420[ 3.266532] NET: Registered protocol family 10
421[ 3.292095] Segment Routing with IPv6
422[ 3.292179] mip6: Mobile IPv6
423[ 3.292187] NET: Registered protocol family 17
424[ 3.292306] mpls_gso: MPLS GSO support
425[ 3.293012] mce: Using 6 MCE banks
426[ 3.293147] microcode: CPU0: patch_level=0x07030105
427[ 3.293192] microcode: CPU1: patch_level=0x07030105
428[ 3.293212] microcode: CPU2: patch_level=0x07030105
429[ 3.293259] microcode: CPU3: patch_level=0x07030105
430[ 3.293405] microcode: Microcode Update Driver: v2.2.
431[ 3.293444] sched_clock: Marking stable (3228348619, 65038767)->(3403124948, -109737562)
432[ 3.294371] registered taskstats version 1
433[ 3.294373] Loading compiled-in X.509 certificates
434[ 3.454533] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
435[ 3.454590] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
436[ 3.454663] zswap: loaded using pool lzo/zbud
437[ 3.455004] AppArmor: AppArmor sha1 policy hashing enabled
438[ 3.456175] rtc_cmos 00:01: setting system clock to 2019-12-04 11:03:52 UTC (1575457432)
439[ 4.999382] Freeing unused kernel image memory: 1584K
440[ 4.999440] tsc: Refined TSC clocksource calibration: 998.127 MHz
441[ 4.999463] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65b93289, max_idle_ns: 881590487074 ns
442[ 4.999516] clocksource: Switched to clocksource tsc
443[ 5.018460] Write protecting the kernel read-only data: 16384k
444[ 5.024475] Freeing unused kernel image memory: 2028K
445[ 5.025176] Freeing unused kernel image memory: 772K
446[ 5.057815] x86/mm: Checked W+X mappings: passed, no W+X pages found.
447[ 5.057831] Run /init as init process
448[ 5.281502] dca service started, version 1.12.1
449[ 5.312836] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
450[ 5.312845] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
451[ 5.313353] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
452[ 5.353292] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
453[ 5.353297] igb: Copyright (c) 2007-2014 Intel Corporation.
454[ 5.365494] cryptd: max_cpu_qlen set to 1000
455[ 5.417006] SCSI subsystem initialized
456[ 5.421617] sdhci: Secure Digital Host Controller Interface driver
457[ 5.421621] sdhci: Copyright(c) Pierre Ossman
458[ 5.433929] AVX version of gcm_enc/dec engaged.
459[ 5.433934] AES CTR mode by8 optimization enabled
460[ 5.440617] pps pps0: new PPS source ptp0
461[ 5.440653] igb 0000:01:00.0: added PHC on eth0
462[ 5.440658] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
463[ 5.440663] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:48:62:04
464[ 5.440668] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
465[ 5.440673] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
466[ 5.442660] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
467[ 5.443690] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
468[ 5.462688] ACPI: bus type USB registered
469[ 5.462839] usbcore: registered new interface driver usbfs
470[ 5.462873] usbcore: registered new interface driver hub
471[ 5.462967] usbcore: registered new device driver usb
472[ 5.481388] pps pps1: new PPS source ptp1
473[ 5.481400] igb 0000:02:00.0: added PHC on eth1
474[ 5.481404] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
475[ 5.481429] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:48:62:05
476[ 5.481448] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
477[ 5.481453] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
478[ 5.483935] libata version 3.00 loaded.
479[ 5.502016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
480[ 5.505690] ehci-pci: EHCI PCI platform driver
481[ 5.506292] ehci-pci 0000:00:13.0: EHCI Host Controller
482[ 5.506313] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
483[ 5.506328] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
484[ 5.506344] ehci-pci 0000:00:13.0: debug port 2
485[ 5.506501] ehci-pci 0000:00:13.0: irq 18, io mem 0xf7fa6000
486[ 5.509878] ahci 0000:00:11.0: version 3.0
487[ 5.510850] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
488[ 5.510858] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
489[ 5.514363] scsi host0: ahci
490[ 5.517639] pps pps2: new PPS source ptp2
491[ 5.517649] igb 0000:03:00.0: added PHC on eth2
492[ 5.517682] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
493[ 5.517687] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:48:62:06
494[ 5.517692] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
495[ 5.517697] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
496[ 5.522290] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
497[ 5.522609] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
498[ 5.522615] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
499[ 5.522620] usb usb1: Product: EHCI Host Controller
500[ 5.522624] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd
501[ 5.522627] usb usb1: SerialNumber: 0000:00:13.0
502[ 5.523249] hub 1-0:1.0: USB hub found
503[ 5.523321] hub 1-0:1.0: 2 ports detected
504[ 5.524945] igb 0000:01:00.0 enp1s0: renamed from eth0
505[ 5.525120] scsi host1: ahci
506[ 5.525587] ata1: SATA max UDMA/133 abar m1024@0xf7fa5000 port 0xf7fa5100 irq 19
507[ 5.525593] ata2: SATA max UDMA/133 abar m1024@0xf7fa5000 port 0xf7fa5180 irq 19
508[ 5.532574] xhci_hcd 0000:00:10.0: xHCI Host Controller
509[ 5.532599] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
510[ 5.532903] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
511[ 5.533906] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
512[ 5.533940] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
513[ 5.533944] usb usb2: Product: xHCI Host Controller
514[ 5.533948] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
515[ 5.533952] usb usb2: SerialNumber: 0000:00:10.0
516[ 5.534539] hub 2-0:1.0: USB hub found
517[ 5.534568] hub 2-0:1.0: 2 ports detected
518[ 5.535273] xhci_hcd 0000:00:10.0: xHCI Host Controller
519[ 5.535285] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
520[ 5.535295] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
521[ 5.536271] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
522[ 5.536387] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
523[ 5.536393] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
524[ 5.536396] usb usb3: Product: xHCI Host Controller
525[ 5.536400] usb usb3: Manufacturer: Linux 4.19.0-6-amd64 xhci-hcd
526[ 5.536404] usb usb3: SerialNumber: 0000:00:10.0
527[ 5.536843] hub 3-0:1.0: USB hub found
528[ 5.536870] hub 3-0:1.0: 2 ports detected
529[ 5.564050] igb 0000:02:00.0 enp2s0: renamed from eth1
530[ 5.598617] igb 0000:03:00.0 enp3s0: renamed from eth2
531[ 5.839773] ata2: SATA link down (SStatus 0 SControl 300)
532[ 5.858455] usb 1-1: new high-speed USB device number 2 using ehci-pci
533[ 6.002435] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
534[ 6.002855] ata1.00: ATA-11: SATA SSD, SBFM01.2, max UDMA/133
535[ 6.002876] ata1.00: 58626288 sectors, multi 16: LBA48 NCQ (depth 32), AA
536[ 6.003134] ata1.00: configured for UDMA/133
537[ 6.003699] scsi 0:0:0:0: Direct-Access ATA SATA SSD 01.2 PQ: 0 ANSI: 5
538[ 6.014607] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
539[ 6.014616] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
540[ 6.016003] hub 1-1:1.0: USB hub found
541[ 6.016092] hub 1-1:1.0: 4 ports detected
542[ 6.020411] sd 0:0:0:0: [sda] 58626288 512-byte logical blocks: (30.0 GB/28.0 GiB)
543[ 6.020467] sd 0:0:0:0: [sda] Write Protect is off
544[ 6.020473] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
545[ 6.020552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
546[ 6.022254] sda: sda1 sda2 < sda5 >
547[ 6.023571] sd 0:0:0:0: [sda] Attached SCSI disk
548[ 6.121605] PM: Image not found (code -22)
549[ 6.425755] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
550[ 6.470259] random: fast init done
551[ 6.714903] systemd[1]: Inserted module 'autofs4'
552[ 6.762347] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
553[ 6.782690] systemd[1]: Detected architecture x86-64.
554[ 6.790897] systemd[1]: Set hostname to <debian>.
555[ 6.791911] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
556[ 7.059099] random: systemd: uninitialized urandom read (16 bytes read)
557[ 7.062510] random: systemd: uninitialized urandom read (16 bytes read)
558[ 7.062948] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
559[ 7.063084] random: systemd: uninitialized urandom read (16 bytes read)
560[ 7.067296] systemd[1]: Created slice system-getty.slice.
561[ 7.067624] systemd[1]: Listening on udev Kernel Socket.
562[ 7.067821] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
563[ 7.068284] systemd[1]: Listening on Journal Audit Socket.
564[ 7.068521] systemd[1]: Listening on initctl Compatibility Named Pipe.
565[ 7.176495] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
566[ 7.471553] audit: type=1400 audit(1575457436.511:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=280 comm="apparmor_parser"
567[ 7.471568] audit: type=1400 audit(1575457436.511:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=280 comm="apparmor_parser"
568[ 7.475986] audit: type=1400 audit(1575457436.515:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=281 comm="apparmor_parser"
569[ 7.476000] audit: type=1400 audit(1575457436.515:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=281 comm="apparmor_parser"
570[ 7.476036] audit: type=1400 audit(1575457436.515:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=281 comm="apparmor_parser"
571[ 7.523545] acpi_cpufreq: overriding BIOS provided _PSD data
572[ 7.536719] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
573[ 7.538278] ACPI: Power Button [PWRB]
574[ 7.538666] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
575[ 7.539152] ACPI: Power Button [PWRF]
576[ 7.639619] systemd-journald[250]: Received request to flush runtime journal from PID 1
577[ 7.654283] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
578[ 7.654626] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
579[ 7.655527] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
580[ 7.678445] sd 0:0:0:0: Attached scsi generic sg0 type 0
581[ 7.694730] ccp 0000:00:08.0: 5 command queues available
582[ 7.696438] ccp 0000:00:08.0: ccp enabled
583[ 7.696445] ccp 0000:00:08.0: enabled
584[ 7.723183] input: PC Speaker as /devices/platform/pcspkr/input/input2
585[ 8.174233] kvm: Nested Virtualization enabled
586[ 8.174245] kvm: Nested Paging enabled
587[ 8.186664] MCE: In-kernel MCE decoding enabled.
588[ 8.196285] EDAC amd64: Node 0: DRAM ECC enabled.
589[ 8.196290] EDAC amd64: F16h_M30h detected (node 0).
590[ 8.196392] EDAC MC: DCT0 chip selects:
591[ 8.196396] EDAC amd64: MC: 0: 4096MB 1: 0MB
592[ 8.196399] EDAC amd64: MC: 2: 0MB 3: 0MB
593[ 8.196401] EDAC amd64: MC: 4: 0MB 5: 0MB
594[ 8.196404] EDAC amd64: MC: 6: 0MB 7: 0MB
595[ 8.196405] EDAC MC: DCT1 chip selects:
596[ 8.196408] EDAC amd64: MC: 0: 0MB 1: 0MB
597[ 8.196410] EDAC amd64: MC: 2: 0MB 3: 0MB
598[ 8.196412] EDAC amd64: MC: 4: 0MB 5: 0MB
599[ 8.196415] EDAC amd64: MC: 6: 0MB 7: 0MB
600[ 8.196416] EDAC amd64: using x4 syndromes.
601[ 8.196418] EDAC amd64: MCT channel count: 1
602[ 8.196966] EDAC MC0: Giving out device to module amd64_edac controller F16h_M30h: DEV 0000:00:18.3 (INTERRUPT)
603[ 8.197015] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
604[ 8.197017] AMD64 EDAC driver v3.5.0
605[ 8.298683] Adding 4174844k swap on /dev/sda5. Priority:-2 extents:1 across:4174844k SSFS
606[ 8.417840] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
607[ 11.479013] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
608[ 11.586794] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
609[ 95.716393] random: crng init done
610[ 95.716407] random: 7 urandom warning(s) missed due to ratelimiting