blob: da222421a6ca9922b8a25eb409c7d9a2f6ff92a3 [file] [log] [blame]
Michał Żygowskiebac3562019-06-03 13:07:01 +02001[ 0.000000] Linux version 4.14.50 (root@adam-X555LJ) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #2 SMP Tue Aug 7 22:57:33 CEST 2018
2[ 0.000000] Command line: bootfile=http://192.168.4.206:8000/menu.ipxe root=/dev/nfs rw ip=dhcp nfsroot=192.168.4.206:/srv/nfs/debian,vers=3,udp nfsrootdebug --- console=ttyS0,115200 earlyprint=serial,ttyS0,115200
3[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
4[ 0.000000] e820: BIOS-provided physical RAM map:
5[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
6[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
7[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ecf8fff] usable
9[ 0.000000] BIOS-e820: [mem 0x000000007ecf9000-0x000000007effffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
12[ 0.000000] NX (Execute Disable) protection: active
13[ 0.000000] SMBIOS 2.7 present.
14[ 0.000000] DMI: PC Engines apu1/apu1, BIOS 4.9-1870-gd44d4f0f4e 06/03/2019
15[ 0.000000] tsc: Fast TSC calibration using PIT
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] e820: last_pfn = 0x7ecf9 max_arch_pfn = 0x400000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
26[ 0.000000] 1 base 000000000 mask F80000000 write-back
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
34[ 0.000000] found SMP MP-table at [mem 0x000f6080-0x000f608f] mapped at [ffffffffff200080]
35[ 0.000000] Base memory trampoline at [ffff920740096000] 96000 size 24576
36[ 0.000000] Using GB pages for direct mapping
37[ 0.000000] BRK [0x27b37000, 0x27b37fff] PGTABLE
38[ 0.000000] BRK [0x27b38000, 0x27b38fff] PGTABLE
39[ 0.000000] BRK [0x27b39000, 0x27b39fff] PGTABLE
40[ 0.000000] BRK [0x27b3a000, 0x27b3afff] PGTABLE
41[ 0.000000] BRK [0x27b3b000, 0x27b3bfff] PGTABLE
42[ 0.000000] BRK [0x27b3c000, 0x27b3cfff] PGTABLE
43[ 0.000000] ACPI: Early table checksum verification disabled
44[ 0.000000] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4)
45[ 0.000000] ACPI: XSDT 0x000000007ED4A0E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
46[ 0.000000] ACPI: FACP 0x000000007ED4C8B0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180531)
47[ 0.000000] ACPI: DSDT 0x000000007ED4A280 00262A (v02 COREv4 COREBOOT 00010001 INTL 20180531)
48[ 0.000000] ACPI: FACS 0x000000007ED4A240 000040
49[ 0.000000] ACPI: FACS 0x000000007ED4A240 000040
50[ 0.000000] ACPI: SSDT 0x000000007ED4C9B0 0001E1 (v02 COREv4 COREBOOT 0000002A CORE 20180531)
51[ 0.000000] ACPI: TPM2 0x000000007ED4CBA0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20180531)
52[ 0.000000] ACPI: APIC 0x000000007ED4CBF0 00005C (v02 COREv4 COREBOOT 00000000 CORE 20180531)
53[ 0.000000] ACPI: HEST 0x000000007ED4CC50 000198 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
54[ 0.000000] ACPI: SSDT 0x000000007ED4CDF0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
55[ 0.000000] ACPI: SSDT 0x000000007ED4E480 00030C (v01 AMD POWERNOW 00000001 AMD 00000001)
56[ 0.000000] ACPI: HPET 0x000000007ED4E790 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531)
57[ 0.000000] ACPI: Local APIC address 0xfee00000
58[ 0.000000] No NUMA configuration found
59[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ecf8fff]
60[ 0.000000] NODE_DATA(0) allocated [mem 0x7ecf4000-0x7ecf8fff]
61[ 0.000000] Zone ranges:
62[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
63[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ecf8fff]
64[ 0.000000] Normal empty
65[ 0.000000] Device empty
66[ 0.000000] Movable zone start for each node
67[ 0.000000] Early memory node ranges
68[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
69[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ecf8fff]
70[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ecf8fff]
71[ 0.000000] On node 0 totalpages: 519319
72[ 0.000000] DMA zone: 64 pages used for memmap
73[ 0.000000] DMA zone: 24 pages reserved
74[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
75[ 0.000000] DMA32 zone: 8052 pages used for memmap
76[ 0.000000] DMA32 zone: 515321 pages, LIFO batch:31
77[ 0.000000] ACPI: PM-Timer IO Port: 0x808
78[ 0.000000] ACPI: Local APIC address 0xfee00000
79[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
80[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
81[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
82[ 0.000000] ACPI: IRQ0 used by override.
83[ 0.000000] ACPI: IRQ9 used by override.
84[ 0.000000] Using ACPI (MADT) for SMP configuration information
85[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
86[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
87[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
88[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
89[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
90[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
91[ 0.000000] e820: [mem 0x7f000000-0xf7ffffff] available for PCI devices
92[ 0.000000] Booting paravirtualized kernel on bare hardware
93[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
94[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x491 with crng_init=0
95[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
96[ 0.000000] percpu: Embedded 44 pages/cpu @ffff9207bea00000 s141912 r8192 d30120 u1048576
97[ 0.000000] pcpu-alloc: s141912 r8192 d30120 u1048576 alloc=1*2097152
98[ 0.000000] pcpu-alloc: [0] 0 1
99[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 511179
100[ 0.000000] Policy zone: DMA32
101[ 0.000000] Kernel command line: bootfile=http://192.168.4.206:8000/menu.ipxe root=/dev/nfs rw ip=dhcp nfsroot=192.168.4.206:/srv/nfs/debian,vers=3,udp nfsrootdebug --- console=ttyS0,115200 earlyprint=serial,ttyS0,115200
102[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
103[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
104[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
105[ 0.000000] Memory: 2018084K/2077276K available (12300K kernel code, 1588K rwdata, 3560K rodata, 1652K init, 688K bss, 59192K reserved, 0K cma-reserved)
106[ 0.000000] ftrace: allocating 34192 entries in 134 pages
107[ 0.000000] Hierarchical RCU implementation.
108[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
109[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
110[ 0.000000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
111[ 0.000000] Console: colour dummy device 80x25
112[ 0.000000] console [ttyS0] enabled
113[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
114[ 0.000000] hpet clockevent registered
115[ 0.000000] tsc: Fast TSC calibration using PIT
116[ 0.004000] tsc: Detected 1000.084 MHz processor
117[ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.16 BogoMIPS (lpj=4000336)
118[ 0.012008] pid_max: default: 32768 minimum: 301
119[ 0.016065] ACPI: Core revision 20170728
120[ 0.030280] ACPI: 4 ACPI AML tables successfully acquired and loaded
121[ 0.032165] Security Framework initialized
122[ 0.036009] Yama: becoming mindful.
123[ 0.040023] AppArmor: AppArmor disabled by boot time parameter
124[ 0.045640] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
125[ 0.056062] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
126[ 0.060117] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
127[ 0.064036] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
128[ 0.068717] CPU: Physical Processor ID: 0
129[ 0.072011] CPU: Processor Core ID: 0
130[ 0.076007] mce: CPU supports 6 MCE banks
131[ 0.080026] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
132[ 0.084007] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
133[ 0.088011] Spectre V2 : Mitigation: Full AMD retpoline
134[ 0.092006] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
135[ 0.096006] Speculative Store Bypass: Vulnerable
136[ 0.100364] Freeing SMP alternatives memory: 32K
137[ 0.110842] smpboot: Max logical packages: 1
138[ 0.112486] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
139[ 0.156000] smpboot: CPU0: AMD G-T40E Processor (family: 0x14, model: 0x2, stepping: 0x0)
140[ 0.156291] Performance Events: AMD PMU driver.
141[ 0.160010] ... version: 0
142[ 0.164005] ... bit width: 48
143[ 0.168004] ... generic registers: 4
144[ 0.172005] ... value mask: 0000ffffffffffff
145[ 0.176005] ... max period: 00007fffffffffff
146[ 0.180004] ... fixed-purpose events: 0
147[ 0.184004] ... event mask: 000000000000000f
148[ 0.188149] Hierarchical SRCU implementation.
149[ 0.193542] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
150[ 0.196057] smp: Bringing up secondary CPUs ...
151[ 0.200497] x86: Booting SMP configuration:
152[ 0.204018] .... node #0, CPUs: #1
153[ 0.208204] smp: Brought up 1 node, 2 CPUs
154[ 0.216009] smpboot: Total of 2 processors activated (4000.33 BogoMIPS)
155[ 0.221003] devtmpfs: initialized
156[ 0.224194] x86/mm: Memory block size: 128MB
157[ 0.232084] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
158[ 0.240070] futex hash table entries: 512 (order: 3, 32768 bytes)
159[ 0.248222] pinctrl core: initialized pinctrl subsystem
160[ 0.252418] NET: Registered protocol family 16
161[ 0.256649] cpuidle: using governor ladder
162[ 0.260115] cpuidle: using governor menu
163[ 0.268239] ACPI: bus type PCI registered
164[ 0.272010] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
165[ 0.276290] PCI: Using configuration type 1 for base access
166[ 0.284006] PCI: Using configuration type 1 for extended access
167[ 0.288370] mtrr: your CPUs had inconsistent variable MTRR settings
168[ 0.296007] mtrr: probably your BIOS does not setup all CPUs.
169[ 0.300003] mtrr: corrected configuration.
170[ 0.308735] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
171[ 0.312037] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
172[ 0.316359] ACPI: Added _OSI(Module Device)
173[ 0.320031] ACPI: Added _OSI(Processor Device)
174[ 0.324005] ACPI: Added _OSI(3.0 _SCP Extensions)
175[ 0.332005] ACPI: Added _OSI(Processor Aggregator Device)
176[ 0.336718] ACPI: Executed 3 blocks of module-level executable AML code
177[ 0.352440] ACPI: Interpreter enabled
178[ 0.356067] ACPI: (supports S0 S1 S3 S4 S5)
179[ 0.360007] ACPI: Using IOAPIC for interrupt routing
180[ 0.364048] HEST: Table parsing has been initialized.
181[ 0.372011] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.380211] ACPI: Enabled 8 GPEs in block 00 to 1F
183[ 0.397164] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
184[ 0.404022] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
185[ 0.412170] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
186[ 0.420729] PCI host bridge to bus 0000:00
187[ 0.424013] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
188[ 0.432009] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
189[ 0.440022] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.444008] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xffffffff]
191[ 0.452009] pci_bus 0000:00: root bus resource [bus 00-ff]
192[ 0.456026] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
193[ 0.456418] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
194[ 0.456475] pci 0000:00:04.0: enabling Extended Tags
195[ 0.464076] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
196[ 0.464371] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400
197[ 0.464424] pci 0000:00:05.0: enabling Extended Tags
198[ 0.468072] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
199[ 0.468355] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400
200[ 0.468408] pci 0000:00:06.0: enabling Extended Tags
201[ 0.476071] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
202[ 0.476421] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
203[ 0.476458] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
204[ 0.476474] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
205[ 0.476490] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
206[ 0.476506] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
207[ 0.476522] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
208[ 0.476538] pci 0000:00:11.0: reg 0x24: [mem 0xf7f03000-0xf7f033ff]
209[ 0.476900] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
210[ 0.476930] pci 0000:00:12.0: reg 0x10: [mem 0xf7f00000-0xf7f00fff]
211[ 0.477334] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
212[ 0.477369] pci 0000:00:12.2: reg 0x10: [mem 0xf7f04000-0xf7f040ff]
213[ 0.477496] pci 0000:00:12.2: supports D1 D2
214[ 0.477500] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
215[ 0.477824] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
216[ 0.477855] pci 0000:00:13.0: reg 0x10: [mem 0xf7f01000-0xf7f01fff]
217[ 0.477855] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
218[ 0.477855] pci 0000:00:13.2: reg 0x10: [mem 0xf7f05000-0xf7f050ff]
219[ 0.477855] pci 0000:00:13.2: supports D1 D2
220[ 0.477855] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
221[ 0.477855] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
222[ 0.477855] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
223[ 0.477855] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
224[ 0.478005] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
225[ 0.478036] pci 0000:00:16.0: reg 0x10: [mem 0xf7f02000-0xf7f02fff]
226[ 0.478438] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
227[ 0.478473] pci 0000:00:16.2: reg 0x10: [mem 0xf7f06000-0xf7f060ff]
228[ 0.478599] pci 0000:00:16.2: supports D1 D2
229[ 0.478604] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
230[ 0.478926] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
231[ 0.479223] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
232[ 0.479510] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
233[ 0.479798] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
234[ 0.480128] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
235[ 0.480414] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
236[ 0.480700] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
237[ 0.480992] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
238[ 0.481452] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
239[ 0.481492] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
240[ 0.481527] pci 0000:01:00.0: reg 0x18: [mem 0xf7a00000-0xf7a00fff 64bit]
241[ 0.481550] pci 0000:01:00.0: reg 0x20: [mem 0xf7900000-0xf7903fff 64bit pref]
242[ 0.481677] pci 0000:01:00.0: supports D1 D2
243[ 0.481681] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
244[ 0.492112] pci 0000:00:04.0: PCI bridge to [bus 01]
245[ 0.496022] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
246[ 0.496030] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff]
247[ 0.496040] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
248[ 0.496233] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
249[ 0.496276] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
250[ 0.496311] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
251[ 0.496334] pci 0000:02:00.0: reg 0x20: [mem 0xf7b00000-0xf7b03fff 64bit pref]
252[ 0.496483] pci 0000:02:00.0: supports D1 D2
253[ 0.496488] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
254[ 0.512111] pci 0000:00:05.0: PCI bridge to [bus 02]
255[ 0.516022] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
256[ 0.516030] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff]
257[ 0.516040] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
258[ 0.516231] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
259[ 0.516275] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
260[ 0.516310] pci 0000:03:00.0: reg 0x18: [mem 0xf7e00000-0xf7e00fff 64bit]
261[ 0.516333] pci 0000:03:00.0: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit pref]
262[ 0.516479] pci 0000:03:00.0: supports D1 D2
263[ 0.516484] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
264[ 0.528112] pci 0000:00:06.0: PCI bridge to [bus 03]
265[ 0.532023] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
266[ 0.532030] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
267[ 0.532041] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref]
268[ 0.532342] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
269[ 0.540022] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
270[ 0.540027] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
271[ 0.540032] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
272[ 0.540037] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
273[ 0.541874] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15)
274[ 0.548223] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15)
275[ 0.556114] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15)
276[ 0.564214] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15)
277[ 0.568213] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15)
278[ 0.576214] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11
279[ 0.584213] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15)
280[ 0.588212] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15)
281[ 0.596405] vgaarb: loaded
282[ 0.598955] pps_core: LinuxPPS API ver. 1 registered
283[ 0.604013] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
284[ 0.612015] PTP clock support registered
285[ 0.616028] EDAC MC: Ver: 3.0.0
286[ 0.620350] PCI: Using ACPI for IRQ routing
287[ 0.624022] PCI: pci_cache_line_size set to 64 bytes
288[ 0.624179] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
289[ 0.624185] e820: reserve RAM buffer [mem 0x7ecf9000-0x7fffffff]
290[ 0.628222] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
291[ 0.632019] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
292[ 0.640025] clocksource: Switched to clocksource hpet
293[ 0.692710] VFS: Disk quotas dquot_6.6.0
294[ 0.696779] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
295[ 0.703920] pnp: PnP ACPI init
296[ 0.707759] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
297[ 0.707891] pnp 00:01: Plug and Play ACPI device, IDs PNP0c31 (active)
298[ 0.708336] pnp: PnP ACPI: found 2 devices
299[ 0.729923] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
300[ 0.738893] pci 0000:00:04.0: PCI bridge to [bus 01]
301[ 0.743883] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
302[ 0.749995] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff]
303[ 0.756804] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
304[ 0.764575] pci 0000:00:05.0: PCI bridge to [bus 02]
305[ 0.769561] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
306[ 0.775672] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff]
307[ 0.782475] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
308[ 0.790234] pci 0000:00:06.0: PCI bridge to [bus 03]
309[ 0.795222] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
310[ 0.801334] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
311[ 0.808138] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref]
312[ 0.815898] pci 0000:00:14.4: PCI bridge to [bus 04]
313[ 0.820905] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
314[ 0.820910] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
315[ 0.820915] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
316[ 0.820920] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
317[ 0.820925] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
318[ 0.820929] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
319[ 0.820934] pci_bus 0000:01: resource 2 [mem 0xf7900000-0xf79fffff 64bit pref]
320[ 0.820939] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
321[ 0.820944] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
322[ 0.820948] pci_bus 0000:02: resource 2 [mem 0xf7b00000-0xf7bfffff 64bit pref]
323[ 0.820953] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
324[ 0.820957] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
325[ 0.820962] pci_bus 0000:03: resource 2 [mem 0xf7d00000-0xf7dfffff 64bit pref]
326[ 0.820968] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
327[ 0.820972] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
328[ 0.820977] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
329[ 0.820981] pci_bus 0000:04: resource 7 [mem 0x7f000000-0xffffffff]
330[ 0.821223] NET: Registered protocol family 2
331[ 0.826129] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
332[ 0.833555] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
333[ 0.840413] TCP: Hash tables configured (established 16384 bind 16384)
334[ 0.847188] UDP hash table entries: 1024 (order: 3, 32768 bytes)
335[ 0.853314] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
336[ 0.860161] NET: Registered protocol family 1
337[ 0.865311] RPC: Registered named UNIX socket transport module.
338[ 0.871339] RPC: Registered udp transport module.
339[ 0.876062] RPC: Registered tcp transport module.
340[ 0.880784] RPC: Registered tcp NFSv4.1 backchannel transport module.
341[ 0.891210] PCI: CLS 64 bytes, default 64
342[ 0.891492] LVT offset 0 assigned for vector 0x400
343[ 0.896512] perf: AMD IBS detected (0x000000ff)
344[ 0.902044] audit: initializing netlink subsys (disabled)
345[ 0.907930] audit: type=2000 audit(1559559866.904:1): state=initialized audit_enabled=0 res=1
346[ 0.908939] Initialise system trusted keyrings
347[ 0.909095] workingset: timestamp_bits=40 max_order=19 bucket_order=0
348[ 0.927559] zbud: loaded
349[ 0.931183] NFS: Registering the id_resolver key type
350[ 0.936364] Key type id_resolver registered
351[ 0.940616] Key type id_legacy registered
352[ 0.944647] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
353[ 1.163139] Key type asymmetric registered
354[ 1.167313] Asymmetric key parser 'x509' registered
355[ 1.172356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
356[ 1.180186] io scheduler noop registered
357[ 1.184136] io scheduler deadline registered
358[ 1.188488] io scheduler cfq registered (default)
359[ 1.193256] io scheduler mq-deadline registered
360[ 1.197802] io scheduler kyber registered
361[ 1.203611] pcieport 0000:00:04.0: Signaling PME with IRQ 24
362[ 1.209406] pcieport 0000:00:05.0: Signaling PME with IRQ 25
363[ 1.215187] pcieport 0000:00:06.0: Signaling PME with IRQ 26
364[ 1.222133] GHES: Failed to enable APEI firmware first mode.
365[ 1.228275] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
366[ 1.255347] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
367[ 1.284100] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
368[ 1.293518] Linux agpgart interface v0.103
369[ 1.298393] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
370[ 1.304487] AMD IOMMUv2 functionality not available on this system
371[ 1.311335] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
372[ 1.318456] e1000: Copyright (c) 1999-2006 Intel Corporation.
373[ 1.324267] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
374[ 1.330162] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
375[ 1.336144] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
376[ 1.343169] igb: Copyright (c) 2007-2014 Intel Corporation.
377[ 1.348823] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
378[ 1.355186] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffb8394038d000, 00:0d:b9:46:fc:0c, XID 0c200000 IRQ 27
379[ 1.365512] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
380[ 1.374115] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
381[ 1.380445] r8169 0000:02:00.0 eth1: RTL8168e/8111e at 0xffffb83940395000, 00:0d:b9:46:fc:0d, XID 0c200000 IRQ 28
382[ 1.390765] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
383[ 1.399343] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
384[ 1.405550] r8169 0000:03:00.0 eth2: RTL8168e/8111e at 0xffffb8394039d000, 00:0d:b9:46:fc:0e, XID 0c200000 IRQ 29
385[ 1.415874] r8169 0000:03:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
386[ 1.424521] i8042: PNP: No PS/2 controller found.
387[ 1.429292] i8042: Probing ports directly.
388[ 3.389624] i8042: No controller found
389[ 3.393406] tsc: Refined TSC clocksource calibration: 999.999 MHz
390[ 3.399525] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd42c7a813, max_idle_ns: 881590565951 ns
391[ 3.399913] mousedev: PS/2 mouse device common for all mice
392[ 3.400138] rtc_cmos 00:00: RTC can wake from S4
393[ 3.400369] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
394[ 3.400430] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
395[ 3.400484] IR NEC protocol handler initialized
396[ 3.400485] IR RC5(x/sz) protocol handler initialized
397[ 3.400487] IR RC6 protocol handler initialized
398[ 3.400488] IR JVC protocol handler initialized
399[ 3.400490] IR Sony protocol handler initialized
400[ 3.400491] IR SANYO protocol handler initialized
401[ 3.400493] IR Sharp protocol handler initialized
402[ 3.400494] IR MCE Keyboard/mouse protocol handler initialized
403[ 3.400496] IR XMP protocol handler initialized
404[ 3.476188] ledtrig-cpu: registered to indicate activity on CPUs
405[ 3.482906] NET: Registered protocol family 10
406[ 3.488424] Segment Routing with IPv6
407[ 3.492200] mip6: Mobile IPv6
408[ 3.495179] NET: Registered protocol family 17
409[ 3.499685] mpls_gso: MPLS GSO support
410[ 3.504550] microcode: CPU0: patch_level=0x05000119
411[ 3.509458] microcode: CPU1: patch_level=0x05000119
412[ 3.514771] microcode: Microcode Update Driver: v2.2.
413[ 3.514820] sched_clock: Marking stable (3514702231, 0)->(3673177301, -158475070)
414[ 3.528734] registered taskstats version 1
415[ 3.532926] Loading compiled-in X.509 certificates
416[ 3.537794] zswap: loaded using pool lzo/zbud
417[ 3.543264] rtc_cmos 00:00: setting system clock to 2019-06-03 11:04:30 UTC (1559559870)
418[ 3.552090] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
419[ 3.561155] r8169 0000:01:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
420[ 3.618939] r8169 0000:01:00.0 eth0: link down
421[ 3.619079] r8169 0000:01:00.0 eth0: link down
422[ 3.627980] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
423[ 3.634235] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
424[ 3.643358] r8169 0000:02:00.0 eth1: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
425[ 3.698877] r8169 0000:02:00.0 eth1: link down
426[ 3.703493] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
427[ 3.709750] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
428[ 3.718873] r8169 0000:03:00.0 eth2: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
429[ 3.774938] r8169 0000:03:00.0 eth2: link down
430[ 3.779551] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
431[ 4.481071] clocksource: Switched to clocksource tsc
432[ 6.634453] r8169 0000:01:00.0 eth0: link up
433[ 6.640127] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
434[ 6.660288] Sending DHCP requests .., OK
435[ 8.880132] IP-Config: Got DHCP answer from 192.168.10.1, my address is 192.168.10.70
436[ 8.888015] IP-Config: Complete:
437[ 8.891257] device=eth0, hwaddr=00:0d:b9:46:fc:0c, ipaddr=192.168.10.70, mask=255.255.255.0, gw=192.168.10.1
438[ 8.901527] host=192.168.10.70, domain=, nis-domain=(none)
439[ 8.907459] bootserver=192.168.10.1, rootserver=192.168.4.206, rootpath= nameserver0=192.168.10.1, nameserver1=192.168.10.1
440[ 8.923371] Root-NFS: nfsroot=/srv/nfs/debian,vers=3,udp
441[ 8.928880] NFS: nfs mount opts='vers=2,udp,rsize=4096,wsize=4096,vers=3,udp,nolock,addr=192.168.4.206'
442[ 8.938336] NFS: parsing nfs mount option 'vers=2'
443[ 8.943321] NFS: parsing nfs mount option 'udp'
444[ 8.948037] NFS: parsing nfs mount option 'rsize=4096'
445[ 8.953360] NFS: parsing nfs mount option 'wsize=4096'
446[ 8.958689] NFS: parsing nfs mount option 'vers=3'
447[ 8.963674] NFS: parsing nfs mount option 'udp'
448[ 8.968394] NFS: parsing nfs mount option 'nolock'
449[ 8.973367] NFS: parsing nfs mount option 'addr=192.168.4.206'
450[ 8.979394] NFS: MNTPATH: '/srv/nfs/debian'
451[ 8.983596] NFS: sending MNT request for 192.168.4.206:/srv/nfs/debian
452[ 8.996913] NFS: received 1 auth flavors
453[ 9.000947] NFS: auth flavor[0]: 1
454[ 9.004688] NFS: MNT request succeeded
455[ 9.008513] NFS: attempting to use auth flavor 1
456[ 9.022688] VFS: Mounted root (nfs filesystem) on device 0:18.
457[ 9.035536] Freeing unused kernel memory: 1652K
458[ 9.040160] Write protecting the kernel read-only data: 18432k
459[ 9.048874] Freeing unused kernel memory: 2008K
460[ 9.058577] Freeing unused kernel memory: 536K
461[ 9.091064] x86/mm: Checked W+X mappings: passed, no W+X pages found.
462[ 9.225715] random: fast init done
463[ 9.717555] autofs4: module verification failed: signature and/or required key missing - tainting kernel
464[ 9.759873] ip_tables: (C) 2000-2006 Netfilter Core Team
465[ 9.803910] random: systemd: uninitialized urandom read (16 bytes read)
466[ 9.822499] random: systemd: uninitialized urandom read (16 bytes read)
467[ 9.833531] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
468[ 9.868764] systemd[1]: Detected architecture x86-64.
469[ 9.906204] systemd[1]: Set hostname to <debian>.
470[ 9.970395] random: systemd: uninitialized urandom read (16 bytes read)
471[ 11.059362] systemd[1]: Listening on Journal Socket (/dev/log).
472[ 11.081214] systemd[1]: Created slice System Slice.
473[ 11.102926] systemd[1]: Mounting POSIX Message Queue File System...
474[ 11.124960] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
475[ 11.153160] systemd[1]: Listening on Journal Socket.
476[ 11.174794] systemd[1]: Starting Remount Root and Kernel File Systems...
477[ 11.196578] systemd[1]: Reached target Swap.
478[ 11.834487] systemd-journald[100]: Received request to flush runtime journal from PID 1
479[ 12.661584] acpi_cpufreq: overriding BIOS provided _PSD data
480[ 12.689955] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
481[ 12.704909] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
482[ 12.729134] ACPI: Power Button [PWRF]
483[ 12.766499] SCSI subsystem initialized
484[ 12.831742] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
485[ 12.847657] r8169 0000:03:00.0 enp3s0: renamed from eth2
486[ 12.898900] tpm_tis 00:01: 2.0 TPM (device-id 0x1A, rev-id 16)
487[ 12.919085] ACPI: bus type USB registered
488[ 12.925221] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
489[ 12.937236] libata version 3.00 loaded.
490[ 12.938627] usbcore: registered new interface driver usbfs
491[ 12.955318] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
492[ 12.955323] input: PC Speaker as /devices/platform/pcspkr/input/input1
493[ 12.967093] r8169 0000:02:00.0 enp2s0: renamed from eth1
494[ 12.973297] usbcore: registered new interface driver hub
495[ 12.973382] usbcore: registered new device driver usb
496[ 12.991301] ahci 0000:00:11.0: version 3.0
497[ 12.994155] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
498[ 13.002418] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
499[ 13.021205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
500[ 13.029148] scsi host0: ahci
501[ 13.034724] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
502[ 13.040105] scsi host1: ahci
503[ 13.046476] scsi host2: ahci
504[ 13.051944] ehci-pci: EHCI PCI platform driver
505[ 13.057700] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
506[ 13.060105] scsi host3: ahci
507[ 13.066704] scsi host4: ahci
508[ 13.071863] scsi host5: ahci
509[ 13.076466] ata1: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03100 irq 19
510[ 13.083902] ata2: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03180 irq 19
511[ 13.091406] ata3: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03200 irq 19
512[ 13.098833] ata4: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03280 irq 19
513[ 13.100300] sp5100_tco: I/O address 0x0cd6 already in use
514[ 13.111670] ata5: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03300 irq 19
515[ 13.119091] ata6: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03380 irq 19
516[ 13.269704] QUIRK: Enable AMD PLL fix
517[ 13.269807] ehci-pci 0000:00:12.2: EHCI Host Controller
518[ 13.275162] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
519[ 13.311639] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
520[ 13.321745] ehci-pci 0000:00:12.2: debug port 1
521[ 13.353145] kvm: Nested Virtualization enabled
522[ 13.367487] kvm: Nested Paging enabled
523[ 13.413058] ehci-pci 0000:00:12.2: irq 17, io mem 0xf7f04000
524[ 13.440083] ata1: SATA link down (SStatus 0 SControl 300)
525[ 13.445650] ata5: SATA link down (SStatus 0 SControl 300)
526[ 13.451129] ata4: SATA link down (SStatus 0 SControl 300)
527[ 13.457255] ata2: SATA link down (SStatus 0 SControl 300)
528[ 13.463244] ata6: SATA link down (SStatus 0 SControl 300)
529[ 13.469142] ata3: SATA link down (SStatus 0 SControl 300)
530[ 13.476137] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
531[ 13.502258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
532[ 13.509179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
533[ 13.516481] usb usb1: Product: EHCI Host Controller
534[ 13.521382] usb usb1: Manufacturer: Linux 4.14.50 ehci_hcd
535[ 13.526894] usb usb1: SerialNumber: 0000:00:12.2
536[ 13.734812] hub 1-0:1.0: USB hub found
537[ 13.780266] hub 1-0:1.0: 5 ports detected
538[ 13.870356] ehci-pci 0000:00:13.2: EHCI Host Controller
539[ 13.878385] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
540[ 13.901288] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
541[ 13.910201] ehci-pci 0000:00:13.2: debug port 1
542[ 13.941302] ehci-pci 0000:00:13.2: irq 17, io mem 0xf7f05000
543[ 13.982719] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
544[ 13.989991] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
545[ 13.997385] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
546[ 14.006047] usb usb2: Product: EHCI Host Controller
547[ 14.011769] usb usb2: Manufacturer: Linux 4.14.50 ehci_hcd
548[ 14.017287] usb usb2: SerialNumber: 0000:00:13.2
549[ 14.019287] hub 2-0:1.0: USB hub found
550[ 14.019318] hub 2-0:1.0: 5 ports detected
551[ 14.023343] ehci-pci 0000:00:16.2: EHCI Host Controller
552[ 14.023363] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
553[ 14.023376] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
554[ 14.023439] ehci-pci 0000:00:16.2: debug port 1
555[ 14.024933] ehci-pci 0000:00:16.2: irq 17, io mem 0xf7f06000
556[ 14.062024] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
557[ 14.066945] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
558[ 14.066952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
559[ 14.066956] usb usb3: Product: EHCI Host Controller
560[ 14.066960] usb usb3: Manufacturer: Linux 4.14.50 ehci_hcd
561[ 14.066963] usb usb3: SerialNumber: 0000:00:16.2
562[ 14.073392] hub 3-0:1.0: USB hub found
563[ 14.073420] hub 3-0:1.0: 4 ports detected
564[ 14.408283] usb 3-1: new high-speed USB device number 2 using ehci-pci
565[ 14.571167] usb 3-1: New USB device found, idVendor=058f, idProduct=6366
566[ 14.578238] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
567[ 14.585455] usb 3-1: Product: Flash Card Reader/Writer
568[ 14.590634] usb 3-1: Manufacturer: Generic
569[ 14.594774] usb 3-1: SerialNumber: 058F63666485
570[ 14.712186] usb-storage 3-1:1.0: USB Mass Storage device detected
571[ 14.724668] scsi host6: usb-storage 3-1:1.0
572[ 14.730525] usbcore: registered new interface driver usb-storage
573[ 14.758881] usbcore: registered new interface driver uas
574[ 15.481222] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
575[ 15.534910] r8169 0000:02:00.0 enp2s0: link down
576[ 15.539698] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
577[ 15.575405] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
578[ 15.630914] r8169 0000:03:00.0 enp3s0: link down
579[ 15.635700] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
580[ 15.746862] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
581[ 15.782045] scsi 6:0:0:0: Attached scsi generic sg0 type 0
582[ 16.185479] sd 6:0:0:0: [sda] 15499264 512-byte logical blocks: (7.94 GB/7.39 GiB)
583[ 16.197937] sd 6:0:0:0: [sda] Write Protect is off
584[ 16.202822] sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00
585[ 16.207809] sd 6:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
586[ 16.237849] sda: sda1 sda2 < sda5 >
587[ 16.252252] sd 6:0:0:0: [sda] Attached SCSI removable disk
588[ 22.221087] random: crng init done
589[ 22.224562] random: 7 urandom warning(s) missed due to ratelimiting