blob: eebd92e5045d42cb6c09eb6794f9dcea9bccf02e [file] [log] [blame]
Build Daemon3829d732018-10-23 14:36:22 +00001[ 0.000000] Linux version 4.9.0-8-686 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08)
2[ 0.000000] x86/fpu: Legacy x87 FPU detected.
3[ 0.000000] e820: BIOS-provided physical RAM map:
4[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
5[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
6[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
7[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000f7b2fff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000f7b3000-0x000000000f7dffff] reserved
9[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
10[ 0.000000] SMBIOS 2.7 present.
11[ 0.000000] DMI: PC Engines ALIX.2C/ALIX.2C, BIOS 4.8-1785-g672d5ad20b 10/14/2018
12[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
13[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
14[ 0.000000] e820: last_pfn = 0xf7b3 max_arch_pfn = 0x100000
15[ 0.000000] MTRR: Disabled
16[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
17[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
18[ 0.000000] initial memory mapped: [mem 0x00000000-0x05bfffff]
19[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
20[ 0.000000] BRK [0x0592e000, 0x0592efff] PGTABLE
21[ 0.000000] RAMDISK: [mem 0x0e1dd000-0x0f229fff]
22[ 0.000000] ACPI: Early table checksum verification disabled
23[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20160831/tbxfroot-244)
24[ 0.000000] 0MB HIGHMEM available.
25[ 0.000000] 247MB LOWMEM available.
26[ 0.000000] mapped low ram: 0 - 0f7b3000
27[ 0.000000] low ram: 0 - 0f7b3000
28[ 0.000000] Zone ranges:
29[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
30[ 0.000000] Normal [mem 0x0000000001000000-0x000000000f7b2fff]
31[ 0.000000] HighMem empty
32[ 0.000000] Movable zone start for each node
33[ 0.000000] Early memory node ranges
34[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
35[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000f7b2fff]
36[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000f7b2fff]
37[ 0.000000] On node 0 totalpages: 63313
38[ 0.000000] free_area_init_node: node 0, pgdat c57ce6c0, node_mem_map cf585024
39[ 0.000000] DMA zone: 36 pages used for memmap
40[ 0.000000] DMA zone: 0 pages reserved
41[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
42[ 0.000000] Normal zone: 522 pages used for memmap
43[ 0.000000] Normal zone: 59315 pages, LIFO batch:15
44[ 0.000000] Using APIC driver default
45[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
46[ 0.000000] No local APIC present or hardware disabled
47[ 0.000000] APIC: disable apic facility
48[ 0.000000] APIC: switched to apic NOOP
49[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
50[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
51[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
52[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
53[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
54[ 0.000000] e820: [mem 0x0f7e0000-0xffffffff] available for PCI devices
55[ 0.000000] Booting paravirtualized kernel on bare hardware
56[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
57[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
58[ 0.000000] percpu: Embedded 19 pages/cpu @cf56f000 s47948 r0 d29876 u77824
59[ 0.000000] pcpu-alloc: s47948 r0 d29876 u77824 alloc=19*4096
60[ 0.000000] pcpu-alloc: [0] 0
61[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62755
62[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-686 root=UUID=48a374e3-a4eb-4552-b406-b1afe613f233 ro console=ttyS0,38400N8 quiet
63[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
64[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
65[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
66[ 0.000000] Initializing CPU#0
67[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
68[ 0.000000] Memory: 224548K/253252K available (5738K kernel code, 644K rwdata, 1708K rodata, 720K init, 452K bss, 28704K reserved, 0K cma-reserved, 0K highmem)
69[ 0.000000] virtual kernel memory layout:
70 fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
71 pkmap : 0xff800000 - 0xffc00000 (4096 kB)
72 vmalloc : 0xcffb3000 - 0xff7fe000 ( 760 MB)
73 lowmem : 0xc0000000 - 0xcf7b3000 ( 247 MB)
74 .init : 0xc57eb000 - 0xc589f000 ( 720 kB)
75 .data : 0xc559ad74 - 0xc57e9380 (2361 kB)
76 .text : 0xc5000000 - 0xc559ad74 (5739 kB)
77[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
78[ 0.000000] Hierarchical RCU implementation.
79[ 0.000000] Build-time adjustment of leaf fanout to 32.
80[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
81[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
82[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
83[ 0.000000] CPU 0 irqstacks, hard=cdc2e000 soft=cdc30000
84[ 0.000000] Console: colour dummy device 80x25
85[ 0.000000] console [ttyS0] enabled
86[ 0.000000] tsc: Fast TSC calibration using PIT
87[ 0.000000] tsc: Detected 498.073 MHz processor
88[ 0.004032] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.14 BogoMIPS (lpj=1992292)
89[ 0.004051] pid_max: default: 32768 minimum: 301
90[ 0.004435] Security Framework initialized
91[ 0.004444] Yama: disabled by default; enable with sysctl kernel.yama.*
92[ 0.004483] AppArmor: AppArmor disabled by boot time parameter
93[ 0.004622] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
94[ 0.004635] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
95[ 0.008773] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
96[ 0.008785] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
97[ 0.008800] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
98[ 0.012016] Spectre V2 : Mitigation: Full generic retpoline
99[ 0.012023] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
100[ 0.012029] Speculative Store Bypass: Vulnerable
101[ 0.034220] Freeing SMP alternatives memory: 24K
102[ 0.041022] ftrace: allocating 23770 entries in 47 pages
103[ 0.136343] smpboot: Max logical packages: 1
104[ 0.136354] smpboot: weird, boot CPU (#0) not listed by the BIOS
105[ 0.136359] smpboot: SMP motherboard not detected
106[ 0.136364] smpboot: SMP disabled
107[ 0.136370] smpboot: Local APIC not detected. Using dummy APIC emulation.
108[ 0.136377] Performance Events: no PMU driver, software events only.
109[ 0.140943] NMI watchdog: disabled (cpu0): hardware events not enabled
110[ 0.140951] NMI watchdog: Shutting down hard lockup detector on all cpus
111[ 0.141046] x86: Booted up 1 node, 1 CPUs
112[ 0.141057] smpboot: Total of 1 processors activated (996.14 BogoMIPS)
113[ 0.141812] devtmpfs: initialized
114[ 0.144204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
115[ 0.144225] futex hash table entries: 256 (order: 2, 16384 bytes)
116[ 0.144365] pinctrl core: initialized pinctrl subsystem
117[ 0.145409] NET: Registered protocol family 16
118[ 0.147435] cpuidle: using governor ladder
119[ 0.147443] cpuidle: using governor menu
120[ 0.147653] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
121[ 0.151945] PCI: PCI BIOS revision 2.10 entry at 0xffa40, last bus=0
122[ 0.151952] PCI: Using configuration type 1 for base access
123[ 0.162075] HugeTLB registered 4 MB page size, pre-allocated 0 pages
124[ 0.163720] ACPI: Interpreter disabled.
125[ 0.164206] vgaarb: loaded
126[ 0.164787] PCI: Probing PCI hardware
127[ 0.164796] PCI: root bus 00: using default resources
128[ 0.164805] PCI: Probing PCI hardware (bus 00)
129[ 0.165132] PCI host bridge to bus 0000:00
130[ 0.165166] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
131[ 0.165182] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
132[ 0.165196] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
133[ 0.165343] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
134[ 0.165482] pci 0000:00:01.0: reg 0x10: [io 0xac1c-0xac1f]
135[ 0.166702] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
136[ 0.166942] pci 0000:00:01.2: reg 0x10: [mem 0xfe010000-0xfe013fff]
137[ 0.168627] pci 0000:00:09.0: [1106:3053] type 00 class 0x020000
138[ 0.168666] pci 0000:00:09.0: reg 0x10: [io 0x1000-0x10ff]
139[ 0.168693] pci 0000:00:09.0: reg 0x14: [mem 0xfe019000-0xfe0190ff]
140[ 0.168802] pci 0000:00:09.0: supports D1 D2
141[ 0.168816] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
142[ 0.169289] pci 0000:00:0a.0: [1106:3053] type 00 class 0x020000
143[ 0.169326] pci 0000:00:0a.0: reg 0x10: [io 0x1400-0x14ff]
144[ 0.169352] pci 0000:00:0a.0: reg 0x14: [mem 0xfe01a000-0xfe01a0ff]
145[ 0.169459] pci 0000:00:0a.0: supports D1 D2
146[ 0.169473] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
147[ 0.169912] pci 0000:00:0b.0: [1106:3053] type 00 class 0x020000
148[ 0.169949] pci 0000:00:0b.0: reg 0x10: [io 0x1800-0x18ff]
149[ 0.169975] pci 0000:00:0b.0: reg 0x14: [mem 0xfe01b000-0xfe01b0ff]
150[ 0.170082] pci 0000:00:0b.0: supports D1 D2
151[ 0.170096] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
152[ 0.170635] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
153[ 0.170945] pci 0000:00:0f.0: reg 0x10: [io 0x24b0-0x24b7]
154[ 0.171204] pci 0000:00:0f.0: reg 0x14: [io 0x1c00-0x1cff]
155[ 0.171462] pci 0000:00:0f.0: reg 0x18: [io 0x2400-0x243f]
156[ 0.171721] pci 0000:00:0f.0: reg 0x1c: [io 0x2480-0x249f]
157[ 0.172029] pci 0000:00:0f.0: reg 0x20: [io 0x2000-0x207f]
158[ 0.172306] pci 0000:00:0f.0: reg 0x24: [io 0x2440-0x247f]
159[ 0.173261] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
160[ 0.174163] pci 0000:00:0f.2: reg 0x20: [io 0x24a0-0x24af]
161[ 0.174569] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
162[ 0.174583] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
163[ 0.174598] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
164[ 0.174612] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
165[ 0.175305] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
166[ 0.175626] pci 0000:00:0f.4: reg 0x10: [mem 0xfe016000-0xfe016fff]
167[ 0.177143] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
168[ 0.177853] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
169[ 0.178168] pci 0000:00:0f.5: reg 0x10: [mem 0xfe017000-0xfe017fff]
170[ 0.179642] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
171[ 0.180332] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
172[ 0.180873] PCI: pci_cache_line_size set to 32 bytes
173[ 0.181198] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
174[ 0.181210] e820: reserve RAM buffer [mem 0x0f7b3000-0x0fffffff]
175[ 0.182756] clocksource: Switched to clocksource pit
176[ 0.249026] VFS: Disk quotas dquot_6.6.0
177[ 0.249139] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
178[ 0.249802] pnp: PnP ACPI: disabled
179[ 0.249813] PnPBIOS: Scanning system for PnP BIOS support...
180[ 0.249963] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6760
181[ 0.249978] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xd153, dseg 0xf0000
182[ 0.254499] PnPBIOS: dev_node_info: function not supported on this system
183[ 0.258896] PnPBIOS: Unable to get node info. Aborting.
184[ 0.281078] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
185[ 0.281098] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
186[ 0.281410] NET: Registered protocol family 2
187[ 0.282570] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
188[ 0.282623] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
189[ 0.282681] TCP: Hash tables configured (established 2048 bind 2048)
190[ 0.282801] UDP hash table entries: 256 (order: 1, 8192 bytes)
191[ 0.282832] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
192[ 0.283072] NET: Registered protocol family 1
193[ 0.283863] PCI: CLS 64 bytes, default 32
194[ 0.284192] Unpacking initramfs...
195[ 1.021376] random: fast init done
196[ 3.457712] Freeing initrd memory: 16692K
197[ 3.458261] platform rtc_cmos: registered platform RTC device (no PNP device found)
198[ 3.474339] audit: initializing netlink subsys (disabled)
199[ 3.474433] audit: type=2000 audit(1539701892.472:1): initialized
200[ 3.476470] workingset: timestamp_bits=14 max_order=16 bucket_order=2
201[ 3.476576] zbud: loaded
202[ 3.482857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
203[ 3.483057] io scheduler noop registered
204[ 3.483065] io scheduler deadline registered
205[ 3.483154] io scheduler cfq registered (default)
206[ 3.483893] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
207[ 3.483957] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
208[ 3.484126] unchecked MSR access error: RDMSR from 0x179 at rIP: 0xc504378a (native_read_msr+0xa/0x40)
209[ 3.484133] c581a0b4 c581d8d8 c588110c cdcd3f84 c581d8f2 cdcd3f10 c540a90b cdcd3f84
210[ 3.484169] c3ba0ccf c3ba0ccf c3ba0ccf 00000000 c50004f5 00000006 cf584c6d c574741c
211[ 3.484202] 0000009e c57eb51a c5074b86 00000000 cdcf5200 00000001 c5764fb0 00000003
212[ 3.484234] Call Trace:
213[ 3.484262] [<c581a0b4>] ? efifb_driver_init+0xc/0xc
214[ 3.484279] [<c581d8d8>] ? ghes_init+0x176/0x176
215[ 3.484296] [<c581d8f2>] ? extlog_init+0x1a/0x30c
216[ 3.484315] [<c540a90b>] ? driver_register+0x8b/0xf0
217[ 3.484331] [<c50004f5>] ? do_one_initcall+0x45/0x180
218[ 3.484352] [<c57eb51a>] ? set_debug_rodata+0xa/0xa
219[ 3.484375] [<c5074b86>] ? parse_args+0x2c6/0x580
220[ 3.484398] [<c57ebc66>] ? kernel_init_freeable+0x139/0x1b2
221[ 3.484416] [<c5591790>] ? rest_init+0x70/0x70
222[ 3.484431] [<c55917a0>] ? kernel_init+0x10/0x100
223[ 3.484449] [<c50818c1>] ? schedule_tail+0x11/0x50
224[ 3.484464] [<c5591790>] ? rest_init+0x70/0x70
225[ 3.484485] [<c5597dfc>] ? ret_from_fork+0x30/0x3c
226[ 3.484789] isapnp: Scanning for PnP cards...
227[ 3.840869] isapnp: No Plug & Play device found
228[ 3.841395] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
229[ 3.841876] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a NS16550A
230[ 3.842429] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
231[ 3.844683] Linux agpgart interface v0.103
232[ 3.846882] i8042: PNP: No PS/2 controller found. Probing ports directly.
233[ 3.855162] i8042: No controller found
234[ 3.855763] mousedev: PS/2 mouse device common for all mice
235[ 3.856485] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
236[ 3.856549] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
237[ 3.856736] ledtrig-cpu: registered to indicate activity on CPUs
238[ 3.858348] NET: Registered protocol family 10
239[ 3.859653] mip6: Mobile IPv6
240[ 3.859665] NET: Registered protocol family 17
241[ 3.859681] mpls_gso: MPLS GSO support
242[ 3.859690] mce: Unable to init device /dev/mcelog (rc: -5)
243[ 3.864757] Using IPI No-Shortcut mode
244[ 3.865971] registered taskstats version 1
245[ 3.866033] zswap: loaded using pool lzo/zbud
246[ 3.866308] ima: No TPM chip found, activating TPM-bypass!
247[ 3.866320] ima: Allocated hash algorithm: sha256
248[ 3.867350] rtc_cmos rtc_cmos: setting system clock to 2018-10-16 14:58:14 UTC (1539701894)
249[ 3.867576] PM: Hibernation image not present or could not be loaded.
250[ 3.868654] Freeing unused kernel memory: 720K
251[ 3.869053] Write protecting the kernel text: 5740k
252[ 3.869359] Write protecting the kernel read-only data: 1716k
253[ 3.989423] random: systemd-udevd: uninitialized urandom read (16 bytes read)
254[ 3.994420] random: systemd-udevd: uninitialized urandom read (16 bytes read)
255[ 3.994577] random: systemd-udevd: uninitialized urandom read (16 bytes read)
256[ 4.133155] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
257[ 4.159107] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:b9:13:5b:e4, IRQ 10
258[ 4.159907] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c1e1
259[ 4.220289] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management Adapter) at 0x11400, 00:0d:b9:13:5b:e5, IRQ 11
260[ 4.221090] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
261[ 4.224363] SCSI subsystem initialized
262[ 4.263981] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management Adapter) at 0x11800, 00:0d:b9:13:5b:e6, IRQ 9
263[ 4.264781] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
264[ 4.293733] usbcore: registered new interface driver usbfs
265[ 4.293875] usbcore: registered new interface driver hub
266[ 4.295896] usbcore: registered new device driver usb
267[ 4.300976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
268[ 4.303071] ehci-pci: EHCI PCI platform driver
269[ 4.303478] ehci-pci 0000:00:0f.5: EHCI Host Controller
270[ 4.303524] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
271[ 4.303799] ehci-pci 0000:00:0f.5: cache line size of 64 is not supported
272[ 4.303843] ehci-pci 0000:00:0f.5: irq 9, io mem 0xfe017000
273[ 4.313377] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
274[ 4.317686] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
275[ 4.318189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
276[ 4.318206] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
277[ 4.318219] usb usb1: Product: EHCI Host Controller
278[ 4.318233] usb usb1: Manufacturer: Linux 4.9.0-8-686 ehci_hcd
279[ 4.318246] usb usb1: SerialNumber: 0000:00:0f.5
280[ 4.319478] hub 1-0:1.0: USB hub found
281[ 4.319531] hub 1-0:1.0: 4 ports detected
282[ 4.321873] libata version 3.00 loaded.
283[ 4.327684] pata_amd 0000:00:0f.2: version 0.4.1
284[ 4.331289] ohci-pci: OHCI PCI platform driver
285[ 4.348924] scsi host0: pata_amd
286[ 4.354972] scsi host1: pata_amd
287[ 4.355594] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24a0 irq 14
288[ 4.355606] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24a8 irq 15
289[ 4.356198] ohci-pci 0000:00:0f.4: OHCI PCI host controller
290[ 4.356242] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
291[ 4.356364] ohci-pci 0000:00:0f.4: irq 9, io mem 0xfe016000
292[ 4.478895] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe5bde59910, max_idle_ns: 881590495387 ns
293[ 4.478988] clocksource: Switched to clocksource tsc
294[ 4.520801] ata1.00: CFA: SanDisk SDCFH-2048, HDX 4.09, max MWDMA2
295[ 4.520818] ata1.00: 4001760 sectors, multi 0: LBA
296[ 4.521665] ata1.00: configured for MWDMA2
297[ 4.526246] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-20 4.09 PQ: 0 ANSI: 5
298[ 4.528287] ata2: port disabled--ignoring
299[ 4.536447] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
300[ 4.536467] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
301[ 4.536480] usb usb2: Product: OHCI PCI host controller
302[ 4.536494] usb usb2: Manufacturer: Linux 4.9.0-8-686 ohci_hcd
303[ 4.536507] usb usb2: SerialNumber: 0000:00:0f.4
304[ 4.541887] hub 2-0:1.0: USB hub found
305[ 4.543466] hub 2-0:1.0: 4 ports detected
306[ 4.682389] sd 0:0:0:0: [sda] 4001760 512-byte logical blocks: (2.05 GB/1.91 GiB)
307[ 4.682707] sd 0:0:0:0: [sda] Write Protect is off
308[ 4.682728] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
309[ 4.682868] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
310[ 4.687707] sda: sda1 sda2 < sda5 >
311[ 4.695032] sd 0:0:0:0: [sda] Attached SCSI removable disk
312[ 5.175587] PM: Starting manual resume from disk
313[ 5.175608] PM: Hibernation image partition 8:5 present
314[ 5.175614] PM: Looking for hibernation image.
315[ 5.176787] PM: Image not found (code -22)
316[ 5.176797] PM: Hibernation image not present or could not be loaded.
317[ 5.691718] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
318[ 6.328116] usb 1-2: new high-speed USB device number 2 using ehci-pci
319[ 6.478347] usb 1-2: New USB device found, idVendor=174c, idProduct=55aa
320[ 6.478366] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
321[ 6.478379] usb 1-2: Product: MEDION HDDrive-n-GO
322[ 6.478392] usb 1-2: Manufacturer: MEDION
323[ 6.478405] usb 1-2: SerialNumber: 203000000000000067B7
324[ 6.963041] ip_tables: (C) 2000-2006 Netfilter Core Team
325[ 7.018111] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
326[ 7.018920] systemd[1]: Detected architecture x86.
327[ 7.020477] systemd[1]: Set hostname to <mesum-server>.
328[ 7.947764] systemd[1]: Listening on Journal Socket.
329[ 7.949134] systemd[1]: Listening on Journal Audit Socket.
330[ 7.950501] systemd[1]: Created slice User and Session Slice.
331[ 7.950907] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
332[ 7.951388] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
333[ 7.952665] systemd[1]: Created slice System Slice.
334[ 7.953931] systemd[1]: Created slice system-getty.slice.
335[ 8.176775] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
336[ 8.336956] lp: driver loaded but no devices found
337[ 8.385414] ppdev: user-space parallel port driver
338[ 9.235890] random: crng init done
339[ 9.235905] random: 7 urandom warning(s) missed due to ratelimiting
340[ 10.244500] cs5535-gpio cs5535-gpio: reserved resource region [io 0x1c00-0x1cff]
341[ 10.246110] cs5535-mfd 0000:00:0f.0: 5 devices registered.
342[ 10.253100] AMD Geode RNG detected
343[ 10.372236] sd 0:0:0:0: Attached scsi generic sg0 type 0
344[ 10.373072] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
345[ 10.404357] input: PC Speaker as /devices/platform/pcspkr/input/input0
346[ 10.752940] usb-storage 1-2:1.0: USB Mass Storage device detected
347[ 10.777190] usb-storage 1-2:1.0: Quirks match for vid 174c pid 55aa: 400000
348[ 10.784248] scsi host2: usb-storage 1-2:1.0
349[ 10.785071] usbcore: registered new interface driver usb-storage
350[ 10.811329] usbcore: registered new interface driver uas
351[ 10.876975] systemd-journald[153]: Received request to flush runtime journal from PID 1
352[ 11.289402] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
353[ 11.319771] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x2400-0x243f]
354[ 11.319797] cs5535-mfgpt cs5535-mfgpt: 2 MFGPT timers available
355[ 11.823564] scsi 2:0:0:0: Direct-Access SAMSUNG HN-M101MBB 2AR1 PQ: 0 ANSI: 5
356[ 11.841107] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
357[ 11.841634] sd 2:0:0:0: Attached scsi generic sg1 type 0
358[ 11.842217] sd 2:0:0:0: [sdb] Write Protect is off
359[ 11.842238] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
360[ 11.843343] sd 2:0:0:0: [sdb] No Caching mode page found
361[ 11.859368] sd 2:0:0:0: [sdb] Assuming drive cache: write through
362[ 12.129147] sdb: sdb1
363[ 12.135753] sd 2:0:0:0: [sdb] Attached SCSI disk
364[ 18.764377] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro