lenovo/t440p/4.10-1253-g5331a7cff9/2019-10-30T08_33_07Z/coreboot_console.txt

coreboot-4.10-1253-g5331a7cff9 Wed Oct 30 08:33:07 UTC 2019 bootblock starting (log level: 7)...
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/romstage'
CBFS: Found @ offset 80 size 8684


coreboot-4.10-1253-g5331a7cff9 Wed Oct 30 08:33:07 UTC 2019 romstage starting (log level: 7)...
Disabling Watchdog reboot... done.
SMBus controller enabled.
Setting up static northbridge registers... done.
Started PEG10 link training.
Temporarily hiding PEG10.
Started PEG10 link training.
Temporarily hiding PEG10.
Initializing IGD...
Back from haswell_early_initialization()
CPU id(306c3) ucode:00000027 Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz
AES supported, TXT supported, VT supported
PCH type: QM87, device id: 8c4f, rev id 5
Starting UEFI PEI System Agent
FMAP: Found "FLASH" version 1.1 at b10000.
FMAP: base = ff400000 size = c00000 #areas = 4
FMAP: area RW_MRC_CACHE found @ b00000 (65536 bytes)
MRC: no data in 'RW_MRC_CACHE'
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'mrc.bin'
CBFS: Found @ offset 8fdc0 size 2e6e4
System Agent: Starting up...
System Agent: Initializing PCH
install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
System Agent: Initializing PCH (SMBUS)
System Agent: Initializing PCH (USB)
System Agent: Initializing PCH (SA Init)
System Agent: Initializing PCH (Me UMA)
System Agent: Initializing Memory
System Agent: Done.
Sanity checking heap.
System Agent Version 1.6.1 Build 2
memcfg DDR3 clock 1600 MHz
memcfg channel assignment: A: 0, B  1, C  2
memcfg channel[0] config (00620020):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 8192 MB width x8 or x32 dual rank, selected
   DIMMB 0 MB width x8 or x32 single rank
memcfg channel[1] config (00620020):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 8192 MB width x8 or x32 dual rank, selected
   DIMMB 0 MB width x8 or x32 single rank
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : NO
ME: Manufacturing Mode      : YES
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Initializing
ME: Current Operation State : Bring up
ME: Current Operation Mode  : Debug
ME: Error Code              : No Error
ME: Progress Phase          : BUP Phase
ME: Power Management Event  : Clean Moff->Mx wake
ME: Progress Phase State    : 0x4d
CBMEM:
IMD: root @ 7f7ff000 254 entries.
IMD: root @ 7f7fec00 62 entries.
External stage cache:
IMD: root @ 7fbff000 254 entries.
IMD: root @ 7fbfec00 62 entries.
Unhiding PEG10.
SMM Memory Map
SMRAM       : 0x7f800000 0x800000
 Subregion 0: 0x7f800000 0x300000
 Subregion 1: 0x7fb00000 0x100000
 Subregion 2: 0x7fc00000 0x400000
MTRR Range: Start=7f000000 End=80000000 (Size 1000000)
MTRR Range: Start=ff800000 End=0 (Size 800000)
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/postcar'
CBFS: Found @ offset 37880 size 58ec
Decompressing stage fallback/postcar @ 0x7f7d0fc0 (38960 bytes)
Loading module at 7f7d1000 with entry 7f7d1000. filesize: 0x5490 memsize: 0x97f0
Processing 256 relocs. Offset value of 0x7d7d1000


coreboot-4.10-1253-g5331a7cff9 Wed Oct 30 08:33:07 UTC 2019 postcar starting (log level: 7)...
usbdebug: Failed hardware init
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/ramstage'
CBFS: Found @ offset 13800 size 1c3ab
Decompressing stage fallback/ramstage @ 0x7f780fc0 (322872 bytes)
Loading module at 7f781000 with entry 7f781000. filesize: 0x398b8 memsize: 0x4ecf8
Processing 4018 relocs. Offset value of 0x7e981000


coreboot-4.10-1253-g5331a7cff9 Wed Oct 30 08:33:07 UTC 2019 ramstage starting (log level: 7)...
usbdebug: Failed hardware init
Normal boot.
BS: BS_PRE_DEVICE times (us): entry 0 run 0 exit 0
BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 1 exit 0
Enumerating buses...
CPU_CLUSTER: 0 enabled
DOMAIN: 0000 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [8086/0c04] enabled
PCI: 00:01.0 subordinate bus PCI Express
PCI: 00:01.0 [8086/0c01] enabled
PCI: 00:02.0 [8086/0416] enabled
PCI: 00:03.0 [8086/0c0c] enabled
PCI: 00:04.0 [8086/0c03] enabled
PCI: 00:14.0 [8086/8c31] enabled
PCI: 00:16.0 [8086/8c3a] enabled
PCI: 00:16.1: Disabling device
PCI: 00:16.2: Disabling device
PCI: 00:16.3: Disabling device
PCI: 00:19.0 [8086/153a] enabled
PCI: 00:1a.0 [8086/8c2d] enabled
PCI: 00:1b.0 [8086/8c20] enabled
PCIe Root Port 1 ASPM is disabled
PCI: 00:1c.0 [8086/8c10] enabled
PCIe Root Port 2 ASPM is disabled
PCI: 00:1c.1 [8086/8c12] enabled
PCI: 00:1c.2 [8086/8c14] disabled
PCI: 00:1c.3 [8086/8c16] disabled
PCI: 00:1c.4 [8086/8c18] disabled
PCI: 00:1d.0 [8086/8c26] enabled
PCI: 00:1f.0 [8086/8c4f] enabled
PCI: 00:1f.2 [8086/8c03] enabled
PCI: 00:1f.3 [8086/8c22] enabled
PCI: 00:1f.5: Disabling device
PCI: 00:1f.6: Disabling device
PCI: Leftover static devices:
PCI: 00:16.1
PCI: 00:16.2
PCI: 00:16.3
PCI: 00:1c.5
PCI: 00:1c.6
PCI: 00:1c.7
PCI: 00:1f.5
PCI: 00:1f.6
PCI: Check your devicetree.cb.
PCI: pci_scan_bus for bus 01
scan_bus: scanning of bus PCI: 00:01.0 took 14 usecs
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [10ec/5227] enabled
Enabling Common Clock Configuration
ASPM: Enabled L0s and L1
scan_bus: scanning of bus PCI: 00:1c.0 took 209 usecs
PCI: pci_scan_bus for bus 03
PCI: 03:00.0 [168c/0034] enabled
Enabling Common Clock Configuration
PCIE CLK PM is not supported by endpoint
ASPM: Enabled L0s and L1
Failed to enable LTR for dev = PCI: 03:00.0
scan_bus: scanning of bus PCI: 00:1c.1 took 204 usecs
No CMOS option 'touchpad'.
PMH7: ID 05 Revision 12
PNP: 00ff.1 enabled
EC Firmware ID GLHT29WW-3.23, Version 2.01B
H8: BDC detection not implemented. Assuming BDC installed
No CMOS option 'bluetooth'.
H8: WWAN detection not implemented. Assuming WWAN installed
No CMOS option 'wwan'.
PNP: 00ff.2 enabled
PNP: 0c31.0 enabled
scan_bus: scanning of bus PCI: 00:1f.0 took 4791 usecs
scan_bus: scanning of bus PCI: 00:1f.3 took 2 usecs
scan_bus: scanning of bus DOMAIN: 0000 took 5569 usecs
scan_bus: scanning of bus Root Device took 5580 usecs
done
FMAP: area RW_MRC_CACHE found @ b00000 (65536 bytes)
MRC: Checking cached data update for 'RW_MRC_CACHE'.
flash size 0x2800000 bytes
SF: Detected Opaque HW-sequencing with sector size 0x1000, total 0x2800000
SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
MRC: no data in 'RW_MRC_CACHE'
MRC: cache data 'RW_MRC_CACHE' needs update.
SF: Successfully written 2 bytes @ 0xb00000
SF: Successfully written 2 bytes @ 0xb00002
SF: Successfully written 4068 bytes @ 0xb00020
BS: BS_DEV_ENUMERATE times (us): entry 0 run 5611 exit 8955
found VGA at PCI: 00:02.0
Setting up VGA for PCI: 00:02.0
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Allocating resources...
Reading resources...
mc_add_fixed_mmio_resources: Adding PCIEXBAR @ 60 0xf0000000-0xf3ffffff.
mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff.
mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff.
mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff.
mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff.
MC MAP: TOM: 0x400000000
MC MAP: TOUUD: 0x47de00000
MC MAP: MESEG_BASE: 0x7ffff00000
MC MAP: MESEG_LIMIT: 0xfffff
MC MAP: REMAP_BASE: 0x400000000
MC MAP: REMAP_LIMIT: 0x47ddfffff
MC MAP: TOLUD: 0x82200000
MC MAP: BGSM: 0x80000000
MC MAP: BDSM: 0x80200000
MC MAP: TESGMB: 0x7f800000
MC MAP: GGC: 0x209
PCI: 00:1a.0 EHCI BAR hook registered
More than one caller of pci_ehci_read_resources from PCI: 00:1d.0
PNP: 00ff.1 missing read_resources
PNP: 00ff.2 missing read_resources
Done reading resources.
skipping PNP: 00ff.2@60 fixed resource, size=0!
skipping PNP: 00ff.2@62 fixed resource, size=0!
skipping PNP: 00ff.2@64 fixed resource, size=0!
skipping PNP: 00ff.2@66 fixed resource, size=0!
Setting resources...
PCI: 00:01.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io
PCI: 00:01.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem
PCI: 00:01.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 mem
PCI: 00:02.0 10 <- [0x00e0000000 - 0x00e03fffff] size 0x00400000 gran 0x16 mem64
PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64
PCI: 00:02.0 20 <- [0x0000001800 - 0x000000183f] size 0x00000040 gran 0x06 io
PCI: 00:03.0 10 <- [0x00e0638000 - 0x00e063bfff] size 0x00004000 gran 0x0e mem64
PCI: 00:04.0 10 <- [0x00e0630000 - 0x00e0637fff] size 0x00008000 gran 0x0f mem64
PCI: 00:14.0 10 <- [0x00e0620000 - 0x00e062ffff] size 0x00010000 gran 0x10 mem64
PCI: 00:16.0 10 <- [0x00e0645000 - 0x00e064500f] size 0x00000010 gran 0x04 mem64
PCI: 00:19.0 10 <- [0x00e0600000 - 0x00e061ffff] size 0x00020000 gran 0x11 mem
PCI: 00:19.0 14 <- [0x00e0640000 - 0x00e0640fff] size 0x00001000 gran 0x0c mem
PCI: 00:19.0 18 <- [0x0000001840 - 0x000000185f] size 0x00000020 gran 0x05 io
PCI: 00:1a.0 EHCI Debug Port hook triggered
PCI: 00:1a.0 10 <- [0x00e0642000 - 0x00e06423ff] size 0x00000400 gran 0x0a mem
PCI: 00:1a.0 10 <- [0x00e0642000 - 0x00e06423ff] size 0x00000400 gran 0x0a mem
PCI: 00:1a.0 EHCI Debug Port relocated
PCI: 00:1b.0 10 <- [0x00e063c000 - 0x00e063ffff] size 0x00004000 gran 0x0e mem64
PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io
PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem
PCI: 00:1c.0 20 <- [0x00e0400000 - 0x00e04fffff] size 0x00100000 gran 0x14 bus 02 mem
PCI: 02:00.0 10 <- [0x00e0400000 - 0x00e0400fff] size 0x00001000 gran 0x0c mem
PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io
PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem
PCI: 00:1c.1 20 <- [0x00e0500000 - 0x00e05fffff] size 0x00100000 gran 0x14 bus 03 mem
PCI: 03:00.0 10 <- [0x00e0500000 - 0x00e057ffff] size 0x00080000 gran 0x13 mem64
PCI: 03:00.0 30 <- [0x00e0580000 - 0x00e058ffff] size 0x00010000 gran 0x10 romem
PCI: 00:1d.0 10 <- [0x00e0643000 - 0x00e06433ff] size 0x00000400 gran 0x0a mem
PNP: 00ff.1 missing set_resources
PNP: 00ff.2 missing set_resources
PCI: 00:1f.2 10 <- [0x0000001880 - 0x0000001887] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 14 <- [0x0000001890 - 0x0000001893] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 18 <- [0x0000001888 - 0x000000188f] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 1c <- [0x0000001894 - 0x0000001897] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 20 <- [0x0000001860 - 0x000000187f] size 0x00000020 gran 0x05 io
PCI: 00:1f.2 24 <- [0x00e0641000 - 0x00e06417ff] size 0x00000800 gran 0x0b mem
PCI: 00:1f.3 10 <- [0x00e0644000 - 0x00e06440ff] size 0x00000100 gran 0x08 mem64
Done setting resources.
Done allocating resources.
BS: BS_DEV_RESOURCES times (us): entry 0 run 1594 exit 0
Enabling resources...
PCI: 00:00.0 subsystem <- 17aa/220e
PCI: 00:00.0 cmd <- 06
PCI: 00:01.0 bridge ctrl <- 0013
PCI: 00:01.0 cmd <- 00
PCI: 00:02.0 subsystem <- 17aa/220e
PCI: 00:02.0 cmd <- 03
PCI: 00:03.0 subsystem <- 17aa/220e
PCI: 00:03.0 cmd <- 02
PCI: 00:04.0 cmd <- 02
PCI: 00:14.0 subsystem <- 17aa/220e
PCI: 00:14.0 cmd <- 102
PCI: 00:16.0 subsystem <- 17aa/220e
PCI: 00:16.0 cmd <- 02
PCI: 00:19.0 subsystem <- 17aa/220e
PCI: 00:19.0 cmd <- 103
PCI: 00:1a.0 subsystem <- 17aa/220e
PCI: 00:1a.0 cmd <- 106
PCI: 00:1b.0 subsystem <- 17aa/220e
PCI: 00:1b.0 cmd <- 102
PCI: 00:1c.0 bridge ctrl <- 0013
PCI: 00:1c.0 subsystem <- 17aa/220e
PCI: 00:1c.0 cmd <- 06
PCI: 00:1c.1 bridge ctrl <- 0013
PCI: 00:1c.1 subsystem <- 17aa/220e
PCI: 00:1c.1 cmd <- 06
PCI: 00:1d.0 subsystem <- 17aa/220e
PCI: 00:1d.0 cmd <- 102
PCI: 00:1f.0 subsystem <- 17aa/220e
PCI: 00:1f.0 cmd <- 107
PCI: 00:1f.2 subsystem <- 17aa/220e
PCI: 00:1f.2 cmd <- 103
PCI: 00:1f.3 subsystem <- 17aa/220e
PCI: 00:1f.3 cmd <- 103
PCI: 02:00.0 cmd <- 02
PCI: 03:00.0 cmd <- 02
done.
BS: BS_DEV_ENABLE times (us): entry 0 run 183 exit 0
Found TPM ST33ZP24 by ST Microelectronics
TPM: Startup
TPM: command 0x99 returned 0x0
TPM: Asserting physical presence
TPM: command 0x4000000a returned 0x0
TPM: command 0x65 returned 0x0
TPM: flags disable=0, deactivated=0, nvlocked=1
TPM: setup succeeded
Initializing devices...
Root Device init ...
Root Device init finished in 2 usecs
CPU_CLUSTER: 0 init ...
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6
0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
0x0000000100000000 - 0x000000047de00000 size 0x37de00000 type 6
MTRR: Fixed MSR 0x250 0x0606060606060606
MTRR: Fixed MSR 0x258 0x0606060606060606
MTRR: Fixed MSR 0x259 0x0000000000000000
MTRR: Fixed MSR 0x268 0x0606060606060606
MTRR: Fixed MSR 0x269 0x0606060606060606
MTRR: Fixed MSR 0x26a 0x0606060606060606
MTRR: Fixed MSR 0x26b 0x0606060606060606
MTRR: Fixed MSR 0x26c 0x0606060606060606
MTRR: Fixed MSR 0x26d 0x0606060606060606
MTRR: Fixed MSR 0x26e 0x0606060606060606
MTRR: Fixed MSR 0x26f 0x0606060606060606
CPU physical address size: 39 bits
MTRR: default type WB/UC MTRR counts: 4/5.
MTRR: WB selected as default type.
MTRR: 0 base 0x0000000080000000 mask 0x0000007fc0000000 type 0
MTRR: 1 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0
MTRR: 2 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1
MTRR: 3 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Initializing VR config.
CPU has 4 cores, 8 threads enabled.
Setting up SMI for CPU
Will perform SMM setup.
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'cpu_microcode_blob.bin'
CBFS: Found @ offset 8780 size b000
microcode: sig=0x306c3 pf=0x10 revision=0x27
CPU: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz.
Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170
Processing 16 relocs. Offset value of 0x00030000
Attempting to start 7 APs
Waiting for 10ms after sending INIT.
Waiting for 1st SIPI to complete...done.
Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1.
done.
AP: slot 2 apic_id 2.
AP: slot 4 apic_id 3.
AP: slot 3 apic_id 6.
AP: slot 5 apic_id 7.
AP: slot 6 apic_id 4.
AP: slot 7 apic_id 5.
Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0x00038000
SMM Module: stub loaded at 00038000. Will call 7f7a11f5(00000000)
Installing SMM handler to 0x7f800000
Loading module at 7f810000 with entry 7f810589. filesize: 0x1d90 memsize: 0x5df8
Processing 99 relocs. Offset value of 0x7f810000
Loading module at 7f808000 with entry 7f808000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0x7f808000
SMM Module: placing jmp sequence at 7f807c00 rel16 0x03fd
SMM Module: placing jmp sequence at 7f807800 rel16 0x07fd
SMM Module: placing jmp sequence at 7f807400 rel16 0x0bfd
SMM Module: placing jmp sequence at 7f807000 rel16 0x0ffd
SMM Module: placing jmp sequence at 7f806c00 rel16 0x13fd
SMM Module: placing jmp sequence at 7f806800 rel16 0x17fd
SMM Module: placing jmp sequence at 7f806400 rel16 0x1bfd
SMM Module: stub loaded at 7f808000. Will call 7f810589(00000000)
Initializing Southbridge SMI...
SMI_STS: MCSMI PM1 
WAK PWRBTN BM TMROF New SMBASE 0x7f800000
In relocation handler: cpu 0
New SMBASE=0x7f800000 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7f7ffc00
In relocation handler: cpu 1
New SMBASE=0x7f7ffc00 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7f7fec00
In relocation handler: cpu 5
New SMBASE=0x7f7fec00 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7f7ff400
In relocation handler: cpu 3
New SMBASE=0x7f7ff400 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7f7fe400
In relocation handler: cpu 7
New SMBASE=0x7f7fe400 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7f7ff800
In relocation handler: cpu 2
New SMBASE=0x7f7ff800 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7f7ff000
In relocation handler: cpu 4
New SMBASE=0x7f7ff000 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7f7fe800
In relocation handler: cpu 6
New SMBASE=0x7f7fe800 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
Initializing CPU #0
CPU: vendor Intel device 306c3
CPU: family 06, model 3c, stepping 03
Setting up local APIC...
 apic_id: 0x00 done.
VMX status: enabled
IA32_FEATURE_CONTROL status: locked
haswell: energy policy set to 6
haswell: frequency set to 2700
Turbo is available but hidden
Turbo is available and visible
CPU #0 initialized
Initializing CPU #1
Initializing CPU #5
Initializing CPU #3
Initializing CPU #2
Initializing CPU #4
CPU: vendor Intel device 306c3
CPU: family 06, model 3c, stepping 03
CPU: vendor Intel device 306c3
CPU: family 06, model 3c, stepping 03
CPU: vendor Intel device 306c3
CPU: family 06, model 3c, stepping 03
Setting up local APIC...
Setting up local APIC...
Initializing CPU #6
Initializing CPU #7
CPU: vendor Intel device 306c3
CPU: family 06, model 3c, stepping 03
 apic_id: 0x02 done.
Setting up local APIC...
CPU: vendor Intel device 306c3
Setting up local APIC...
CPU: vendor Intel device 306c3
CPU: family 06, model 3c, stepping 03
CPU: vendor Intel device 306c3
CPU: family 06, model 3c, stepping 03
 apic_id: 0x01 done.
 apic_id: 0x03 done.
Setting up local APIC...
VMX status: enabled
VMX status: enabled
IA32_FEATURE_CONTROL status: locked
VMX status: enabled
CPU: family 06, model 3c, stepping 03
 apic_id: 0x04 done.
 apic_id: 0x07 done.
Setting up local APIC...
IA32_FEATURE_CONTROL status: locked
IA32_FEATURE_CONTROL status: locked
haswell: energy policy set to 6
VMX status: enabled
Setting up local APIC...
VMX status: enabled
 apic_id: 0x06 done.
IA32_FEATURE_CONTROL status: locked
 apic_id: 0x05 done.
VMX status: enabled
IA32_FEATURE_CONTROL status: locked
haswell: energy policy set to 6
haswell: frequency set to 2700
CPU #2 initialized
IA32_FEATURE_CONTROL status: locked
haswell: frequency set to 2700
CPU #4 initialized
VMX status: enabled
haswell: energy policy set to 6
IA32_FEATURE_CONTROL status: locked
haswell: energy policy set to 6
haswell: energy policy set to 6
haswell: energy policy set to 6
haswell: frequency set to 2700
CPU #5 initialized
haswell: frequency set to 2700
CPU #3 initialized
haswell: frequency set to 2700
CPU #1 initialized
haswell: energy policy set to 6
haswell: frequency set to 2700
CPU #6 initialized
haswell: frequency set to 2700
CPU #7 initialized
bsp_do_flight_plan done after 2 msecs.
Enabling SMIs.
Locking SMM.
CPU_CLUSTER: 0 init finished in 17643 usecs
PCI: 00:00.0 init ...
Disabling PEG12.
Disabling PEG11.
Disabling "device 7".
Set BIOS_RESET_CPL
CPU TDP: 47 Watts
PCI: 00:00.0 init finished in 1015 usecs
PCI: 00:02.0 init ...
GT Power Management Init
GT Power Management Init (post VBIOS)

[0.298845] CONFIG =>
[0.298846]   (Primary   =>
[0.298846]      (Port => Internal,
[0.298847]       Framebuffer =>
[0.298847]         (Width     => 1920,
[0.298848]          Height    => 1080,
[0.298849]          Start_X   => 0,
[0.298849]          Start_Y   => 0,
[0.298850]          Stride    => 1920,
[0.298851]          V_Stride  => 1080,
[0.298852]          Tiling    => Linear ,
[0.298853]          Rotation  => No_Rotation,
[0.298854]          Offset => 0x00000000,
[0.298855]          BPC    => 8),
[0.298855]       Mode =>
[0.298856]         (Dotclock           => 140100000,
[0.298857]          H_Visible          => 1920,
[0.298858]          H_Sync_Begin       => 1980,
[0.298859]          H_Sync_End         => 2016,
[0.298860]          H_Total            => 2092,
[0.298861]          V_Visible          => 1080,
[0.298862]          V_Sync_Begin       => 1083,
[0.298863]          V_Sync_End         => 1088,
[0.298864]          V_Total            => 1116,
[0.298865]          H_Sync_Active_High => True,
[0.298866]          V_Sync_Active_High => False,
[0.298867]          BPC                => 6)),
[0.298868]    Secondary =>
[0.298868]      (Port => Disabled,
[0.298869]       Framebuffer =>
[0.298869]         (Width     => 1,
[0.298870]          Height    => 1,
[0.298870]          Start_X   => 0,
[0.298871]          Start_Y   => 0,
[0.298871]          Stride    => 1,
[0.298872]          V_Stride  => 1,
[0.298872]          Tiling    => Linear ,
[0.298873]          Rotation  => No_Rotation,
[0.298874]          Offset => 0x00000000,
[0.298875]          BPC    => 8),
[0.298875]       Mode =>
[0.298876]         (Dotclock           => 1000000,
[0.298877]          H_Visible          => 1,
[0.298878]          H_Sync_Begin       => 1,
[0.298879]          H_Sync_End         => 1,
[0.298880]          H_Total            => 1,
[0.298881]          V_Visible          => 1,
[0.298882]          V_Sync_Begin       => 1,
[0.298883]          V_Sync_End         => 1,
[0.298884]          V_Total            => 1,
[0.298885]          H_Sync_Active_High => False,
[0.298886]          V_Sync_Active_High => False,
[0.298887]          BPC                => 5)),
[0.298888]    Tertiary  =>
[0.298888]      (Port => Disabled,
[0.298889]       Framebuffer =>
[0.298889]         (Width     => 1,
[0.298890]          Height    => 1,
[0.298890]          Start_X   => 0,
[0.298891]          Start_Y   => 0,
[0.298891]          Stride    => 1,
[0.298892]          V_Stride  => 1,
[0.298892]          Tiling    => Linear ,
[0.298893]          Rotation  => No_Rotation,
[0.298894]          Offset => 0x00000000,
[0.298895]          BPC    => 8),
[0.298895]       Mode =>
[0.298896]         (Dotclock           => 1000000,
[0.298897]          H_Visible          => 1,
[0.298898]          H_Sync_Begin       => 1,
[0.298899]          H_Sync_End         => 1,
[0.298900]          H_Total            => 1,
[0.298901]          V_Visible          => 1,
[0.298902]          V_Sync_Begin       => 1,
[0.298903]          V_Sync_End         => 1,
[0.298904]          V_Total            => 1,
[0.298905]          H_Sync_Active_High => False,
[0.298906]          V_Sync_Active_High => False,
[0.298907]          BPC                => 5)));
PCI: 00:02.0 init finished in 206085 usecs
PCI: 00:03.0 init ...
Mini-HD: base = e0638000
HDA: No codec!
PCI: 00:03.0 init finished in 51011 usecs
PCI: 00:04.0 init ...
PCI: 00:04.0 init finished in 0 usecs
PCI: 00:14.0 init ...
IOBP: set 0xe5004001 to 0x000000ce
PCI: 00:14.0 init finished in 41 usecs
PCI: 00:16.0 init ...
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : NO
ME: Manufacturing Mode      : YES
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Initializing
ME: Current Operation State : Bring up
ME: Current Operation Mode  : Debug
ME: Error Code              : No Error
ME: Progress Phase          : BUP Phase
ME: Power Management Event  : Clean Moff->Mx wake
ME: Progress Phase State    : 0x4d
intel_me_path: mbp is not ready!
ME: BIOS path: Error
ME: MBP not ready
PCI: 00:16.0 init finished in 44 usecs
PCI: 00:19.0 init ...
PCI: 00:19.0 init finished in 0 usecs
PCI: 00:1a.0 init ...
EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce
done.
PCI: 00:1a.0 init finished in 33 usecs
PCI: 00:1b.0 init ...
Azalia: base = e063c000
Azalia: codec_mask = 01
HDA: Initializing codec #0
HDA: codec viddid: 10ec0292
HDA: verb loaded.
PCI: 00:1b.0 init finished in 3058 usecs
PCI: 00:1c.0 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.0 init finished in 7 usecs
PCI: 00:1c.1 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.1 init finished in 7 usecs
PCI: 00:1d.0 init ...
EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce
done.
PCI: 00:1d.0 init finished in 33 usecs
PCI: 00:1f.0 init ...
pch: lpc_init
IOAPIC: Initializing IOAPIC at 0xfec00000
IOAPIC: Bootstrap Processor Local APIC = 0x00
IOAPIC: ID = 0x02
Set power off after power failure.
NMI sources enabled.
LynxPoint PM init
RTC: failed = 0x0
RTC Init
Disabling ACPI via APMC:
done.
PCI: 00:1f.0 init finished in 498 usecs
PCI: 00:1f.2 init ...
SATA: Initializing...
SATA: Controller in AHCI mode.
ABAR: e0641000
PCI: 00:1f.2 init finished in 38 usecs
PCI: 00:1f.3 init ...
PCI: 00:1f.3 init finished in 6 usecs
PCI: 02:00.0 init ...
PCI: 02:00.0 init finished in 0 usecs
PCI: 03:00.0 init ...
PCI: 03:00.0 init finished in 0 usecs
PNP: 00ff.2 init ...
PNP: 00ff.2 init finished in 0 usecs
Devices initialized
BS: BS_DEV_INIT times (us): entry 61322 run 279603 exit 0
Finalize devices...
PCI: 00:1f.0 final
Devices finalized
BS: BS_POST_DEVICE times (us): entry 0 run 57 exit 0
BS: BS_OS_RESUME_CHECK times (us): entry 0 run 0 exit 0
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/dsdt.aml'
CBFS: Found @ offset 3d1c0 size 362a
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/slic'
CBFS: 'fallback/slic' not found.
ACPI: Writing ACPI tables at 7f743000.
ACPI:    * FACS
ACPI:    * DSDT
ACPI:    * FADT
ACPI: added table 1/32, length now 40
ACPI:     * SSDT
Found 1 CPU(s) with 8 core(s) each.
PSS: 2701MHz power 47000 control 0x2500 status 0x2500
PSS: 2700MHz power 47000 control 0x1b00 status 0x1b00
PSS: 2000MHz power 32032 control 0x1400 status 0x1400
PSS: 1600MHz power 24429 control 0x1000 status 0x1000
PSS: 1200MHz power 17445 control 0xc00 status 0xc00
PSS: 800MHz power 11060 control 0x800 status 0x800
PSS: 2701MHz power 47000 control 0x2500 status 0x2500
PSS: 2700MHz power 47000 control 0x1b00 status 0x1b00
PSS: 2000MHz power 32032 control 0x1400 status 0x1400
PSS: 1600MHz power 24429 control 0x1000 status 0x1000
PSS: 1200MHz power 17445 control 0xc00 status 0xc00
PSS: 800MHz power 11060 control 0x800 status 0x800
PSS: 2701MHz power 47000 control 0x2500 status 0x2500
PSS: 2700MHz power 47000 control 0x1b00 status 0x1b00
PSS: 2000MHz power 32032 control 0x1400 status 0x1400
PSS: 1600MHz power 24429 control 0x1000 status 0x1000
PSS: 1200MHz power 17445 control 0xc00 status 0xc00
PSS: 800MHz power 11060 control 0x800 status 0x800
PSS: 2701MHz power 47000 control 0x2500 status 0x2500
PSS: 2700MHz power 47000 control 0x1b00 status 0x1b00
PSS: 2000MHz power 32032 control 0x1400 status 0x1400
PSS: 1600MHz power 24429 control 0x1000 status 0x1000
PSS: 1200MHz power 17445 control 0xc00 status 0xc00
PSS: 800MHz power 11060 control 0x800 status 0x800
PSS: 2701MHz power 47000 control 0x2500 status 0x2500
PSS: 2700MHz power 47000 control 0x1b00 status 0x1b00
PSS: 2000MHz power 32032 control 0x1400 status 0x1400
PSS: 1600MHz power 24429 control 0x1000 status 0x1000
PSS: 1200MHz power 17445 control 0xc00 status 0xc00
PSS: 800MHz power 11060 control 0x800 status 0x800
PSS: 2701MHz power 47000 control 0x2500 status 0x2500
PSS: 2700MHz power 47000 control 0x1b00 status 0x1b00
PSS: 2000MHz power 32032 control 0x1400 status 0x1400
PSS: 1600MHz power 24429 control 0x1000 status 0x1000
PSS: 1200MHz power 17445 control 0xc00 status 0xc00
PSS: 800MHz power 11060 control 0x800 status 0x800
PSS: 2701MHz power 47000 control 0x2500 status 0x2500
PSS: 2700MHz power 47000 control 0x1b00 status 0x1b00
PSS: 2000MHz power 32032 control 0x1400 status 0x1400
PSS: 1600MHz power 24429 control 0x1000 status 0x1000
PSS: 1200MHz power 17445 control 0xc00 status 0xc00
PSS: 800MHz power 11060 control 0x800 status 0x800
PSS: 2701MHz power 47000 control 0x2500 status 0x2500
PSS: 2700MHz power 47000 control 0x1b00 status 0x1b00
PSS: 2000MHz power 32032 control 0x1400 status 0x1400
PSS: 1600MHz power 24429 control 0x1000 status 0x1000
PSS: 1200MHz power 17445 control 0xc00 status 0xc00
PSS: 800MHz power 11060 control 0x800 status 0x800
Generating ACPI PIRQ entries
ACPI:    * H8
H8: BDC detection not implemented. Assuming BDC installed
H8: WWAN detection not implemented. Assuming WWAN installed
\_SB.PCI0.LPCB.TPM: LPC TPM PNP: 0c31.0
ACPI: added table 2/32, length now 44
ACPI:    * MCFG
ACPI: added table 3/32, length now 48
ACPI:    * TCPA
TCPA log created at 7f733000
ACPI: added table 4/32, length now 52
ACPI:    * MADT
ACPI: added table 5/32, length now 56
current = 7f749800
ACPI:    * DMAR
ACPI: added table 6/32, length now 60
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 36cc0 size 598
Found a VBT of 4608 bytes after decompression
GMA: Found VBT in CBFS
GMA: Found valid VBT in CBFS
ACPI:    * HPET
ACPI: added table 7/32, length now 64
ACPI:     * SSDT2
ACPI: added table 8/32, length now 68
current = 7f74b940
ACPI: done.
ACPI tables: 35136 bytes.
smbios_write_tables: 7f732000
Create SMBIOS type 17
SMBIOS tables: 873 bytes.
Writing table forward entry at 0x00000500
Wrote coreboot table at: 00000500, 0x10 bytes, checksum 1068
Writing coreboot table at 0x7f767000
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 372c0 size 560
 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
 1. 0000000000001000-000000000009ffff: RAM
 2. 00000000000a0000-00000000000fffff: RESERVED
 3. 0000000000100000-000000007f731fff: RAM
 4. 000000007f732000-000000007f780fff: CONFIGURATION TABLES
 5. 000000007f781000-000000007f7cffff: RAMSTAGE
 6. 000000007f7d0000-000000007f7fffff: CONFIGURATION TABLES
 7. 000000007f800000-00000000821fffff: RESERVED
 8. 00000000f0000000-00000000f3ffffff: RESERVED
 9. 00000000fed10000-00000000fed19fff: RESERVED
10. 00000000fed40000-00000000fed44fff: RESERVED
11. 00000000fed84000-00000000fed84fff: RESERVED
12. 00000000fed90000-00000000fed91fff: RESERVED
13. 0000000100000000-000000047ddfffff: RAM
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
Wrote coreboot table at: 7f767000, 0x968 bytes, checksum e70
coreboot table: 2432 bytes.
IMD ROOT    0. 7f7ff000 00001000
IMD SMALL   1. 7f7fe000 00001000
CONSOLE     2. 7f7de000 00020000
TIME STAMP  3. 7f7dd000 00000910
MRC DATA    4. 7f7dc000 00000fe4
ROMSTG STCK 5. 7f7db000 00001000
AFTER CAR   6. 7f7d0000 0000b000
RAMSTAGE    7. 7f780000 00050000
ACPI GNVS   8. 7f77f000 00001000
SMM BACKUP  9. 7f76f000 00010000
COREBOOT   10. 7f767000 00008000
ACPI       11. 7f743000 00024000
TCPA TCGLOG12. 7f733000 00010000
SMBIOS     13. 7f732000 00000800
IMD small region:
  IMD ROOT    0. 7f7fec00 00000400
  USBDEBUG    1. 7f7feba0 00000050
  FMAP        2. 7f7feac0 000000e0
  MEM INFO    3. 7f7fe900 000001b9
  ROMSTAGE    4. 7f7fe8e0 00000004
  COREBOOTFWD 5. 7f7fe8a0 00000028
BS: BS_WRITE_TABLES times (us): entry 0 run 5534 exit 0
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/payload'
CBFS: Found @ offset 40840 size 10705
Checking segment from ROM address 0xfff50a78
Payload being loaded at below 1MiB without region being marked as RAM usable.
Checking segment from ROM address 0xfff50a94
Loading segment from ROM address 0xfff50a78
  code (compression=1)
  New segment dstaddr 0x000e0ce0 memsize 0x1f320 srcaddr 0xfff50ab0 filesize 0x106cd
Loading Segment: addr: 0x000e0ce0 memsz: 0x000000000001f320 filesz: 0x00000000000106cd
using LZMA
Loading segment from ROM address 0xfff50a94
  Entry Point 0x000fd274
BS: BS_PAYLOAD_LOAD times (us): entry 0 run 21590 exit 0
ICH-NM10-PCH: watchdog disabled
Jumping to boot code at 000fd274(7f767000)
SeaBIOS (version rel-1.12.1-0-ga5cab58-dirty-20191030_111400-mylaptop)
BUILD: gcc: (coreboot toolchain v9890bd98b0 2019-08-16) 8.3.0 binutils: (GNU Binutils) 2.32
Found coreboot cbmem console @ 7f7de000
Found mainboard LENOVO ThinkPad T440p
Relocating init from 0x000e2340 to 0x7f6e5580 (size 51680)
Found CBFS header at 0xfff10238
multiboot: eax=7f7b9ee0, ebx=7f7b9e94
Found 21 PCI devices (max PCI bus is 03)
Copying SMBIOS entry point from 0x7f732000 to 0x000f67a0
Copying ACPI RSDP from 0x7f743000 to 0x000f6770
Using pmtimer, ioport 0x508
Scan for VGA option rom
Running option rom at c000:0003
pmm call arg1=0
Turning on vga text mode console
SeaBIOS (version rel-1.12.1-0-ga5cab58-dirty-20191030_111400-mylaptop)
XHCI init on dev 00:14.0: regs @ 0xe0620000, 21 ports, 32 slots, 32 byte contexts
XHCI    protocol USB  2.00, 15 ports (offset 1), def 3001
XHCI    protocol USB  3.00, 6 ports (offset 16), def 1000
XHCI    extcap 0xc1 @ 0xe0628040
XHCI    extcap 0xc0 @ 0xe0628070
XHCI    extcap 0x1 @ 0xe062846c
EHCI init on dev 00:1a.0 (regs=0xe0642020)
EHCI init on dev 00:1d.0 (regs=0xe0643020)
AHCI controller at 00:1f.2, iobase 0xe0641000, irq 10
Found 0 lpt ports
Found 0 serial ports
Discarding ps2 data aa (status=11)
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@5/disk@0
AHCI/5: registering: "DVD/CD [AHCI/5: MATSHITADVD-RAM UJ8E2 ATAPI-8 DVD/CD]"
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
AHCI/0: Set transfer mode to UDMA-6
AHCI/0: registering: "AHCI/0: Crucial_CT1024MX200SSD1 ATA-10 Hard-Disk (931 GiBytes)"
XHCI no devices found
Initialized USB HUB (0 ports used)
Initialized USB HUB (0 ports used)
PS2 keyboard initialized
All threads complete.
Scan for option roms

Press ESC for boot menu.

Searching bootorder for: HALT
drive 0x000f66b0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=1953525168
Space available for UMB: c7000-ed800, f5fc0-f6680
Returned 180224 bytes of ZoneHigh
e820 map has 11 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000007f71e000 = 1 RAM
  4: 000000007f71e000 - 0000000082200000 = 2 RESERVED
  5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
  6: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED
  7: 00000000fed40000 - 00000000fed45000 = 2 RESERVED
  8: 00000000fed84000 - 00000000fed85000 = 2 RESERVED
  9: 00000000fed90000 - 00000000fed92000 = 2 RESERVED
  10: 0000000100000000 - 000000047de00000 = 1 RAM
enter handle_19:
  NULL
Booting from DVD/CD...
Device reports MEDIUM NOT PRESENT
scsi_is_ready returned -1
Boot failed: Could not read from CDROM (code 0003)
enter handle_18:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00