blob: bbcb69882d0f1a2a55be7f123a29dc8c8fc1003e [file] [log] [blame]
ExPLIT16c54412019-03-21 11:03:05 +01001[ 0.000000] Linux version 4.19.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15)
2[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-4-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
3[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
4[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
5[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
6[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
7[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
8[ 0.000000] BIOS-provided physical RAM map:
9[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
10[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff20fff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000007ff21000-0x00000000829fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
18[ 0.000000] NX (Execute Disable) protection: active
19[ 0.000000] SMBIOS 2.7 present.
20[ 0.000000] DMI: LENOVO 23552L1/23552L1, BIOS CBET4000 4.9-1103-g5a38572fd9 03/21/2019
21[ 0.000000] tsc: Fast TSC calibration using PIT
22[ 0.000000] tsc: Detected 2893.565 MHz processor
23[ 0.002003] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
24[ 0.002005] e820: remove [mem 0x000a0000-0x000fffff] usable
25[ 0.002008] last_pfn = 0x47b600 max_arch_pfn = 0x400000000
26[ 0.002013] MTRR default type: write-back
27[ 0.002013] MTRR fixed ranges enabled:
28[ 0.002014] 00000-9FFFF write-back
29[ 0.002015] A0000-BFFFF uncachable
30[ 0.002016] C0000-FFFFF write-back
31[ 0.002016] MTRR variable ranges enabled:
32[ 0.002017] 0 base 080000000 mask FC0000000 uncachable
33[ 0.002018] 1 base 0C0000000 mask FF0000000 uncachable
34[ 0.002019] 2 base 0D0000000 mask FF0000000 write-combining
35[ 0.002020] 3 base 0E0000000 mask FE0000000 uncachable
36[ 0.002020] 4 disabled
37[ 0.002020] 5 disabled
38[ 0.002021] 6 disabled
39[ 0.002021] 7 disabled
40[ 0.002022] 8 disabled
41[ 0.002022] 9 disabled
42[ 0.002770] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
43[ 0.003209] last_pfn = 0x7ff21 max_arch_pfn = 0x400000000
44[ 0.012683] Base memory trampoline at [(____ptrval____)] 99000 size 24576
45[ 0.012688] BRK [0x405001000, 0x405001fff] PGTABLE
46[ 0.012689] BRK [0x405002000, 0x405002fff] PGTABLE
47[ 0.012690] BRK [0x405003000, 0x405003fff] PGTABLE
48[ 0.012710] BRK [0x405004000, 0x405004fff] PGTABLE
49[ 0.012712] BRK [0x405005000, 0x405005fff] PGTABLE
50[ 0.012768] BRK [0x405006000, 0x405006fff] PGTABLE
51[ 0.012783] BRK [0x405007000, 0x405007fff] PGTABLE
52[ 0.012936] RAMDISK: [mem 0x33e33000-0x35f10fff]
53[ 0.012943] ACPI: Early table checksum verification disabled
54[ 0.012999] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
55[ 0.013003] ACPI: XSDT 0x000000007FF470E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190108)
56[ 0.013007] ACPI: FACP 0x000000007FF4AB20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190108)
57[ 0.013012] ACPI: DSDT 0x000000007FF47280 00389F (v02 COREv4 COREBOOT 20110725 INTL 20190108)
58[ 0.013015] ACPI: FACS 0x000000007FF47240 000040
59[ 0.013018] ACPI: FACS 0x000000007FF47240 000040
60[ 0.013020] ACPI: SSDT 0x000000007FF4AC20 001A32 (v02 COREv4 COREBOOT 0000002A CORE 20190108)
61[ 0.013023] ACPI: MCFG 0x000000007FF4C660 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190108)
62[ 0.013026] ACPI: TCPA 0x000000007FF4C6A0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190108)
63[ 0.013029] ACPI: APIC 0x000000007FF4C6E0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190108)
64[ 0.013032] ACPI: DMAR 0x000000007FF4C750 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190108)
65[ 0.013035] ACPI: HPET 0x000000007FF4E820 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190108)
66[ 0.013042] ACPI: Local APIC address 0xfee00000
67[ 0.013114] No NUMA configuration found
68[ 0.013115] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
69[ 0.013118] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff]
70[ 0.013147] Zone ranges:
71[ 0.013148] DMA [mem 0x0000000000001000-0x0000000000ffffff]
72[ 0.013149] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
73[ 0.013151] Normal [mem 0x0000000100000000-0x000000047b5fffff]
74[ 0.013152] Device empty
75[ 0.013153] Movable zone start for each node
76[ 0.013154] Early memory node ranges
77[ 0.013155] node 0: [mem 0x0000000000001000-0x000000000009efff]
78[ 0.013156] node 0: [mem 0x0000000000100000-0x000000007ff20fff]
79[ 0.013157] node 0: [mem 0x0000000100000000-0x000000047b5fffff]
80[ 0.013160] Reserved but unavailable: 98 pages
81[ 0.013161] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
82[ 0.013163] On node 0 totalpages: 4175039
83[ 0.013164] DMA zone: 64 pages used for memmap
84[ 0.013164] DMA zone: 21 pages reserved
85[ 0.013165] DMA zone: 3998 pages, LIFO batch:0
86[ 0.013254] DMA32 zone: 8125 pages used for memmap
87[ 0.013254] DMA32 zone: 519969 pages, LIFO batch:63
88[ 0.026320] Normal zone: 57048 pages used for memmap
89[ 0.026321] Normal zone: 3651072 pages, LIFO batch:63
90[ 0.103743] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
91[ 0.104073] ACPI: PM-Timer IO Port: 0x508
92[ 0.104075] ACPI: Local APIC address 0xfee00000
93[ 0.104090] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
94[ 0.104093] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
95[ 0.104095] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
96[ 0.104096] ACPI: IRQ0 used by override.
97[ 0.104097] ACPI: IRQ9 used by override.
98[ 0.104099] Using ACPI (MADT) for SMP configuration information
99[ 0.104100] ACPI: HPET id: 0x8086a701 base: 0xfed00000
100[ 0.104105] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
101[ 0.104114] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
102[ 0.104115] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
103[ 0.104116] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
104[ 0.104117] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
105[ 0.104118] PM: Registered nosave memory: [mem 0x7ff21000-0x829fffff]
106[ 0.104119] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
107[ 0.104120] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
108[ 0.104121] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
109[ 0.104122] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
110[ 0.104122] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
111[ 0.104123] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
112[ 0.104124] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
113[ 0.104126] [mem 0x82a00000-0xefffffff] available for PCI devices
114[ 0.104127] Booting paravirtualized kernel on bare hardware
115[ 0.104130] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
116[ 0.198567] random: get_random_bytes called from start_kernel+0x93/0x531 with crng_init=0
117[ 0.198573] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
118[ 0.198735] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u524288
119[ 0.198742] pcpu-alloc: s143192 r8192 d28840 u524288 alloc=1*2097152
120[ 0.198743] pcpu-alloc: [0] 0 1 2 3
121[ 0.198758] Built 1 zonelists, mobility grouping on. Total pages: 4109781
122[ 0.198759] Policy zone: Normal
123[ 0.198761] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-4-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
124[ 0.201851] Calgary: detecting Calgary via BIOS EBDA area
125[ 0.201856] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
126[ 0.240987] Memory: 16312728K/16700156K available (10252K kernel code, 1240K rwdata, 3268K rodata, 1576K init, 2308K bss, 387428K reserved, 0K cma-reserved)
127[ 0.241066] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
128[ 0.241071] Kernel/User page tables isolation: enabled
129[ 0.241108] ftrace: allocating 31775 entries in 125 pages
130[ 0.252336] rcu: Hierarchical RCU implementation.
131[ 0.252337] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
132[ 0.252339] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
133[ 0.255044] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
134[ 0.256794] Console: colour VGA+ 80x25
135[ 0.262062] console [tty0] enabled
136[ 0.262130] ACPI: Core revision 20180810
137[ 0.262318] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
138[ 0.262399] hpet clockevent registered
139[ 0.262404] APIC: Switch to symmetric I/O mode setup
140[ 0.262461] DMAR: Host address width 36
141[ 0.262518] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
142[ 0.262579] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
143[ 0.262648] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
144[ 0.262704] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
145[ 0.262762] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
146[ 0.262832] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
147[ 0.262889] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
148[ 0.262947] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
149[ 0.263410] DMAR-IR: Enabled IRQ remapping in x2apic mode
150[ 0.263469] x2apic enabled
151[ 0.263527] Switched APIC routing to cluster x2apic.
152[ 0.264018] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
153[ 0.282403] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b58405791, max_idle_ns: 440795268307 ns
154[ 0.282486] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.13 BogoMIPS (lpj=11574260)
155[ 0.282562] pid_max: default: 32768 minimum: 301
156[ 0.282642] Security Framework initialized
157[ 0.282698] Yama: disabled by default; enable with sysctl kernel.yama.*
158[ 0.282771] AppArmor: AppArmor initialized
159[ 0.284946] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
160[ 0.286097] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
161[ 0.286213] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
162[ 0.286305] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
163[ 0.286637] mce: CPU supports 7 MCE banks
164[ 0.286700] CPU0: Thermal monitoring enabled (TM1)
165[ 0.286763] process: using mwait in idle threads
166[ 0.286821] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
167[ 0.286879] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
168[ 0.286938] Spectre V2 : Mitigation: Full generic retpoline
169[ 0.286995] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
170[ 0.287066] Spectre V2 : Enabling Restricted Speculation for firmware calls
171[ 0.287132] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
172[ 0.287202] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
173[ 0.287262] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
174[ 0.287490] Freeing SMP alternatives memory: 24K
175[ 0.289176] TSC deadline timer enabled
176[ 0.289178] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
177[ 0.289329] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
178[ 0.289420] ... version: 3
179[ 0.289475] ... bit width: 48
180[ 0.289530] ... generic registers: 4
181[ 0.289585] ... value mask: 0000ffffffffffff
182[ 0.289641] ... max period: 00007fffffffffff
183[ 0.289698] ... fixed-purpose events: 3
184[ 0.289754] ... event mask: 000000070000000f
185[ 0.289842] rcu: Hierarchical SRCU implementation.
186[ 0.290208] random: crng done (trusting CPU's manufacturer)
187[ 0.290450] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
188[ 0.290476] smp: Bringing up secondary CPUs ...
189[ 0.290476] x86: Booting SMP configuration:
190[ 0.290476] .... node #0, CPUs: #1 #2 #3
191[ 0.294521] smp: Brought up 1 node, 4 CPUs
192[ 0.294594] smpboot: Max logical packages: 1
193[ 0.294650] smpboot: Total of 4 processors activated (23148.52 BogoMIPS)
194[ 0.297798] devtmpfs: initialized
195[ 0.297798] x86/mm: Memory block size: 128MB
196[ 0.299408] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
197[ 0.299408] futex hash table entries: 1024 (order: 4, 65536 bytes)
198[ 0.299408] pinctrl core: initialized pinctrl subsystem
199[ 0.299408] NET: Registered protocol family 16
200[ 0.299408] audit: initializing netlink subsys (disabled)
201[ 0.299408] audit: type=2000 audit(1553162443.036:1): state=initialized audit_enabled=0 res=1
202[ 0.299408] cpuidle: using governor ladder
203[ 0.299408] cpuidle: using governor menu
204[ 0.299408] ACPI: bus type PCI registered
205[ 0.299408] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
206[ 0.299408] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
207[ 0.299408] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
208[ 0.299408] PCI: Using configuration type 1 for base access
209[ 0.299408] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
210[ 0.299408] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
211[ 0.299408] ACPI: Added _OSI(Module Device)
212[ 0.302481] ACPI: Added _OSI(Processor Device)
213[ 0.302538] ACPI: Added _OSI(3.0 _SCP Extensions)
214[ 0.302593] ACPI: Added _OSI(Processor Aggregator Device)
215[ 0.302647] ACPI: Added _OSI(Linux-Dell-Video)
216[ 0.302703] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
217[ 0.304846] ACPI: 2 ACPI AML tables successfully acquired and loaded
218[ 0.306127] ACPI: EC: EC started
219[ 0.306183] ACPI: EC: interrupt blocked
220[ 0.306653] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
221[ 0.306711] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
222[ 0.306780] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
223[ 0.306850] ACPI: Interpreter enabled
224[ 0.306919] ACPI: (supports S0 S3 S4 S5)
225[ 0.306976] ACPI: Using IOAPIC for interrupt routing
226[ 0.307047] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
227[ 0.307221] ACPI: Enabled 1 GPEs in block 00 to 3F
228[ 0.310302] ACPI: Power Resource [FPWR] (off)
229[ 0.310607] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
230[ 0.310669] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
231[ 0.310775] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
232[ 0.310854] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
233[ 0.310971] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
234[ 0.311049] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])
235[ 0.311256] PCI host bridge to bus 0000:00
236[ 0.311312] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
237[ 0.311370] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
238[ 0.311427] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
239[ 0.311498] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
240[ 0.311567] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
241[ 0.311637] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
242[ 0.311706] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
243[ 0.311774] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
244[ 0.311844] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
245[ 0.311915] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
246[ 0.311985] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
247[ 0.312055] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
248[ 0.312124] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
249[ 0.312194] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
250[ 0.312264] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
251[ 0.312333] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
252[ 0.312403] pci_bus 0000:00: root bus resource [bus 00-ff]
253[ 0.312467] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
254[ 0.312543] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
255[ 0.312552] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
256[ 0.312557] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
257[ 0.312560] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
258[ 0.312621] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
259[ 0.312630] pci 0000:00:04.0: reg 0x10: [mem 0xe1b30000-0xe1b37fff 64bit]
260[ 0.312713] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
261[ 0.312736] pci 0000:00:14.0: reg 0x10: [mem 0xe1b20000-0xe1b2ffff 64bit]
262[ 0.312802] pci 0000:00:14.0: PME# supported from D3hot D3cold
263[ 0.312868] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
264[ 0.312887] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff]
265[ 0.312895] pci 0000:00:19.0: reg 0x14: [mem 0xe1b3c000-0xe1b3cfff]
266[ 0.312903] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
267[ 0.312959] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
268[ 0.313018] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
269[ 0.313039] pci 0000:00:1a.0: reg 0x10: [mem 0xe1b3f000-0xe1b3f3ff]
270[ 0.313119] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
271[ 0.313183] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
272[ 0.313204] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b38000-0xe1b3bfff 64bit]
273[ 0.313274] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
274[ 0.313343] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
275[ 0.313481] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
276[ 0.313574] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
277[ 0.313717] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
278[ 0.313805] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
279[ 0.313826] pci 0000:00:1d.0: reg 0x10: [mem 0xe1b40000-0xe1b403ff]
280[ 0.313906] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
281[ 0.313970] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
282[ 0.314127] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
283[ 0.314146] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
284[ 0.314154] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
285[ 0.314162] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
286[ 0.314170] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
287[ 0.314178] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
288[ 0.314186] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b3e000-0xe1b3e7ff]
289[ 0.314228] pci 0000:00:1f.2: PME# supported from D3hot
290[ 0.314287] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
291[ 0.314306] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b41000-0xe1b410ff 64bit]
292[ 0.314325] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
293[ 0.314397] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
294[ 0.314419] pci 0000:00:1f.6: reg 0x10: [mem 0xe1b3d000-0xe1b3dfff 64bit]
295[ 0.314640] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000
296[ 0.314703] pci 0000:01:00.0: reg 0x10: [mem 0xe1a00000-0xe1a07fff 64bit]
297[ 0.314731] pci 0000:01:00.0: reg 0x18: [mem 0xe1800000-0xe19fffff 64bit]
298[ 0.314936] pci 0000:01:00.0: supports D1 D2
299[ 0.314937] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
300[ 0.315169] pci 0000:00:1c.0: PCI bridge to [bus 01]
301[ 0.315233] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff]
302[ 0.315441] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
303[ 0.315482] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
304[ 0.315787] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff]
305[ 0.316102] pci 0000:02:00.0: supports D1 D2
306[ 0.316103] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
307[ 0.316331] pci 0000:00:1c.1: PCI bridge to [bus 02]
308[ 0.316392] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
309[ 0.316396] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
310[ 0.316404] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
311[ 0.316535] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
312[ 0.316632] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
313[ 0.316728] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
314[ 0.316823] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
315[ 0.316918] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
316[ 0.317011] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
317[ 0.317106] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
318[ 0.317198] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
319[ 0.317792] ACPI: EC: interrupt unblocked
320[ 0.317862] ACPI: EC: event unblocked
321[ 0.317935] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
322[ 0.318005] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
323[ 0.318119] pci 0000:00:02.0: vgaarb: setting as boot VGA device
324[ 0.318119] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
325[ 0.318119] pci 0000:00:02.0: vgaarb: bridge control possible
326[ 0.318119] vgaarb: loaded
327[ 0.318119] pps_core: LinuxPPS API ver. 1 registered
328[ 0.318480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
329[ 0.318554] PTP clock support registered
330[ 0.318613] EDAC MC: Ver: 3.0.0
331[ 0.318830] PCI: Using ACPI for IRQ routing
332[ 0.320035] PCI: pci_cache_line_size set to 64 bytes
333[ 0.320563] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
334[ 0.320564] e820: reserve RAM buffer [mem 0x7ff21000-0x7fffffff]
335[ 0.320565] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
336[ 0.320642] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
337[ 0.320642] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
338[ 0.323501] clocksource: Switched to clocksource tsc-early
339[ 0.330836] VFS: Disk quotas dquot_6.6.0
340[ 0.330906] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
341[ 0.331050] AppArmor: AppArmor Filesystem Enabled
342[ 0.331123] pnp: PnP ACPI init
343[ 0.331297] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
344[ 0.331357] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
345[ 0.331416] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
346[ 0.331476] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
347[ 0.331536] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
348[ 0.331595] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
349[ 0.331655] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
350[ 0.331714] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
351[ 0.331776] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
352[ 0.331835] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
353[ 0.331899] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
354[ 0.332325] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
355[ 0.332388] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
356[ 0.332420] system 00:02: [io 0x0500-0x057f] has been reserved
357[ 0.332478] system 00:02: [io 0x0480-0x04bf] has been reserved
358[ 0.332540] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
359[ 0.332555] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
360[ 0.332579] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
361[ 0.332599] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
362[ 0.332618] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
363[ 0.332635] pnp: PnP ACPI: found 7 devices
364[ 0.338210] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
365[ 0.338312] pci 0000:00:1c.0: PCI bridge to [bus 01]
366[ 0.338375] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff]
367[ 0.338445] pci 0000:00:1c.1: PCI bridge to [bus 02]
368[ 0.338504] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
369[ 0.338569] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
370[ 0.338630] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
371[ 0.338707] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
372[ 0.338709] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
373[ 0.338710] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
374[ 0.338711] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
375[ 0.338712] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
376[ 0.338713] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
377[ 0.338715] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
378[ 0.338716] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
379[ 0.338717] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
380[ 0.338718] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
381[ 0.338719] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
382[ 0.338720] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
383[ 0.338722] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
384[ 0.338723] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
385[ 0.338724] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window]
386[ 0.338725] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
387[ 0.338727] pci_bus 0000:01: resource 1 [mem 0xe1800000-0xe1afffff]
388[ 0.338728] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
389[ 0.338729] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
390[ 0.338730] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
391[ 0.338791] NET: Registered protocol family 2
392[ 0.338989] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
393[ 0.339102] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
394[ 0.339341] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
395[ 0.339503] TCP: Hash tables configured (established 131072 bind 65536)
396[ 0.339592] UDP hash table entries: 8192 (order: 6, 262144 bytes)
397[ 0.339686] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
398[ 0.339807] NET: Registered protocol family 1
399[ 0.339867] NET: Registered protocol family 44
400[ 0.339931] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
401[ 0.340576] PCI: CLS 64 bytes, default 64
402[ 0.340610] Unpacking initramfs...
403[ 0.780061] Freeing initrd memory: 33656K
404[ 0.794534] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
405[ 0.794608] software IO TLB: mapped [mem 0x7bf21000-0x7ff21000] (64MB)
406[ 0.795190] Initialise system trusted keyrings
407[ 0.795290] workingset: timestamp_bits=40 max_order=22 bucket_order=0
408[ 0.796305] zbud: loaded
409[ 0.796570] pstore: using deflate compression
410[ 0.942931] Key type asymmetric registered
411[ 0.942991] Asymmetric key parser 'x509' registered
412[ 0.943056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
413[ 0.943149] io scheduler noop registered
414[ 0.943207] io scheduler deadline registered
415[ 0.943288] io scheduler cfq registered (default)
416[ 0.943346] io scheduler mq-deadline registered
417[ 0.943914] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
418[ 0.943993] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
419[ 0.944073] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
420[ 0.944197] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
421[ 0.944270] intel_idle: MWAIT substates: 0x21120
422[ 0.944271] intel_idle: v0.4.1 model 0x3A
423[ 0.944411] intel_idle: lapic_timer_reliable_states 0xffffffff
424[ 0.944825] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
425[ 0.945223] Linux agpgart interface v0.103
426[ 0.945319] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
427[ 0.945379] AMD IOMMUv2 functionality not available on this system
428[ 0.945668] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
429[ 0.947422] serio: i8042 KBD port at 0x60,0x64 irq 1
430[ 0.947483] serio: i8042 AUX port at 0x60,0x64 irq 12
431[ 0.947676] mousedev: PS/2 mouse device common for all mice
432[ 0.947768] rtc_cmos 00:03: RTC can wake from S4
433[ 0.948000] rtc_cmos 00:03: registered as rtc0
434[ 0.948081] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
435[ 0.948160] intel_pstate: Intel P-state driver initializing
436[ 0.948457] ledtrig-cpu: registered to indicate activity on CPUs
437[ 0.949064] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
438[ 0.949751] NET: Registered protocol family 10
439[ 0.961483] Segment Routing with IPv6
440[ 0.961601] mip6: Mobile IPv6
441[ 0.961668] NET: Registered protocol family 17
442[ 0.961797] mpls_gso: MPLS GSO support
443[ 0.962359] microcode: sig=0x306a9, pf=0x10, revision=0x20
444[ 0.962605] microcode: Microcode Update Driver: v2.2.
445[ 0.962630] sched_clock: Marking stable (955331283, 7255002)->(968935305, -6349020)
446[ 0.964699] registered taskstats version 1
447[ 0.964756] Loading compiled-in X.509 certificates
448[ 0.998680] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
449[ 0.998760] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
450[ 0.998829] zswap: loaded using pool lzo/zbud
451[ 0.998965] AppArmor: AppArmor sha1 policy hashing enabled
452[ 0.999272] rtc_cmos 00:03: setting system clock to 2019-03-21 10:00:44 UTC (1553162444)
453[ 1.000329] Freeing unused kernel image memory: 1576K
454[ 1.046586] Write protecting the kernel read-only data: 16384k
455[ 1.047650] Freeing unused kernel image memory: 2028K
456[ 1.048140] Freeing unused kernel image memory: 828K
457[ 1.062079] x86/mm: Checked W+X mappings: passed, no W+X pages found.
458[ 1.062150] x86/mm: Checking user space page tables
459[ 1.067671] x86/mm: Checked W+X mappings: passed, no W+X pages found.
460[ 1.067730] Run /init as init process
461[ 1.189105] thermal LNXTHERM:00: registered as thermal_zone0
462[ 1.189168] ACPI: Thermal Zone [THM0] (61 C)
463[ 1.190012] thermal LNXTHERM:01: registered as thermal_zone1
464[ 1.190072] ACPI: Thermal Zone [THM1] (27 C)
465[ 1.199130] ACPI: bus type USB registered
466[ 1.199205] usbcore: registered new interface driver usbfs
467[ 1.199268] usbcore: registered new interface driver hub
468[ 1.199858] usbcore: registered new device driver usb
469[ 1.202450] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180810/utaddress-213)
470[ 1.202573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
471[ 1.202650] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180810/utaddress-213)
472[ 1.202742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
473[ 1.202815] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180810/utaddress-213)
474[ 1.202905] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
475[ 1.202979] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180810/utaddress-213)
476[ 1.203070] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
477[ 1.203146] lpc_ich: Resource conflict(s) found affecting gpio_ich
478[ 1.203294] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
479[ 1.204063] ehci-pci: EHCI PCI platform driver
480[ 1.204319] ehci-pci 0000:00:1a.0: EHCI Host Controller
481[ 1.204386] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
482[ 1.204468] ehci-pci 0000:00:1a.0: debug port 2
483[ 1.204874] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
484[ 1.208421] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
485[ 1.208514] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe1b3f000
486[ 1.211336] cryptd: max_cpu_qlen set to 1000
487[ 1.215001] SCSI subsystem initialized
488[ 1.216054] AVX version of gcm_enc/dec engaged.
489[ 1.216112] AES CTR mode by8 optimization enabled
490[ 1.218793] sdhci: Secure Digital Host Controller Interface driver
491[ 1.218854] sdhci: Copyright(c) Pierre Ossman
492[ 1.224111] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
493[ 1.224179] libata version 3.00 loaded.
494[ 1.224295] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
495[ 1.224404] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
496[ 1.224476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
497[ 1.224546] usb usb1: Product: EHCI Host Controller
498[ 1.224604] usb usb1: Manufacturer: Linux 4.19.0-4-amd64 ehci_hcd
499[ 1.224664] usb usb1: SerialNumber: 0000:00:1a.0
500[ 1.224858] hub 1-0:1.0: USB hub found
501[ 1.224921] hub 1-0:1.0: 3 ports detected
502[ 1.226709] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
503[ 1.226979] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
504[ 1.227965] ahci 0000:00:1f.2: version 3.0
505[ 1.228113] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
506[ 1.230642] xhci_hcd 0000:00:14.0: xHCI Host Controller
507[ 1.230708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
508[ 1.231835] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
509[ 1.231912] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
510[ 1.232116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
511[ 1.232189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
512[ 1.232258] usb usb2: Product: xHCI Host Controller
513[ 1.232317] usb usb2: Manufacturer: Linux 4.19.0-4-amd64 xhci-hcd
514[ 1.232377] usb usb2: SerialNumber: 0000:00:14.0
515[ 1.232542] hub 2-0:1.0: USB hub found
516[ 1.232613] hub 2-0:1.0: 4 ports detected
517[ 1.232822] xhci_hcd 0000:00:14.0: xHCI Host Controller
518[ 1.232884] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
519[ 1.232902] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
520[ 1.232956] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
521[ 1.233013] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
522[ 1.233176] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
523[ 1.233203] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
524[ 1.233333] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
525[ 1.233404] usb usb3: Product: xHCI Host Controller
526[ 1.233461] usb usb3: Manufacturer: Linux 4.19.0-4-amd64 xhci-hcd
527[ 1.233521] usb usb3: SerialNumber: 0000:00:14.0
528[ 1.233673] hub 3-0:1.0: USB hub found
529[ 1.233742] hub 3-0:1.0: 4 ports detected
530[ 1.234163] ehci-pci 0000:00:1d.0: EHCI Host Controller
531[ 1.234279] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
532[ 1.234362] ehci-pci 0000:00:1d.0: debug port 2
533[ 1.238324] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
534[ 1.238550] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
535[ 1.238623] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
536[ 1.238709] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
537[ 1.239161] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1b40000
538[ 1.241496] scsi host0: ahci
539[ 1.242650] scsi host1: ahci
540[ 1.242924] scsi host2: ahci
541[ 1.243076] scsi host3: ahci
542[ 1.243218] scsi host4: ahci
543[ 1.244365] scsi host5: ahci
544[ 1.244493] ata1: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e100 irq 28
545[ 1.244568] ata2: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e180 irq 28
546[ 1.244640] ata3: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e200 irq 28
547[ 1.244711] ata4: DUMMY
548[ 1.244768] ata5: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e300 irq 28
549[ 1.244839] ata6: DUMMY
550[ 1.254621] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
551[ 1.254962] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
552[ 1.255035] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
553[ 1.255107] usb usb4: Product: EHCI Host Controller
554[ 1.255167] usb usb4: Manufacturer: Linux 4.19.0-4-amd64 ehci_hcd
555[ 1.255227] usb usb4: SerialNumber: 0000:00:1d.0
556[ 1.255479] hub 4-0:1.0: USB hub found
557[ 1.255545] hub 4-0:1.0: 3 ports detected
558[ 1.279759] alg: No test for pcbc(aes) (pcbc-aes-aesni)
559[ 1.367587] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
560[ 1.493052] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66
561[ 1.493126] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
562[ 1.493233] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
563[ 1.494222] e1000e 0000:00:19.0 enp0s25: renamed from eth0
564[ 1.565750] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
565[ 1.566561] usb 2-3: new high-speed USB device number 2 using xhci_hcd
566[ 1.566705] usb 1-1: new high-speed USB device number 2 using ehci-pci
567[ 1.566712] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133
568[ 1.566865] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA
569[ 1.567116] ata1.00: configured for UDMA/133
570[ 1.567464] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5
571[ 1.590545] usb 4-1: new high-speed USB device number 2 using ehci-pci
572[ 1.720779] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21
573[ 1.720878] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
574[ 1.720952] usb 2-3: Product: USB2.0 Hub
575[ 1.721024] usb 2-3: Manufacturer: VIA Labs, Inc.
576[ 1.721851] hub 2-3:1.0: USB hub found
577[ 1.722691] hub 2-3:1.0: 4 ports detected
578[ 1.723202] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
579[ 1.723297] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
580[ 1.723973] hub 1-1:1.0: USB hub found
581[ 1.724104] hub 1-1:1.0: 6 ports detected
582[ 1.747552] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
583[ 1.747668] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
584[ 1.748321] hub 4-1:1.0: USB hub found
585[ 1.750300] hub 4-1:1.0: 8 ports detected
586[ 1.798699] tsc: Refined TSC clocksource calibration: 2893.427 MHz
587[ 1.798789] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502105a9, max_idle_ns: 440795323709 ns
588[ 1.798936] clocksource: Switched to clocksource tsc
589[ 1.881564] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
590[ 1.903773] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
591[ 1.919115] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
592[ 1.919198] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
593[ 1.934459] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
594[ 1.968979] ata2.00: configured for UDMA/133
595[ 1.978530] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
596[ 1.996922] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
597[ 1.997037] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
598[ 2.010565] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
599[ 2.036290] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
600[ 2.038521] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
601[ 2.047800] usb 3-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21
602[ 2.047897] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
603[ 2.047970] usb 3-3: Product: USB3.0 Hub
604[ 2.048038] usb 3-3: Manufacturer: VIA Labs, Inc.
605[ 2.051129] hub 3-3:1.0: USB hub found
606[ 2.051348] hub 3-3:1.0: 4 ports detected
607[ 2.125526] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=1003, bcdDevice= 1.00
608[ 2.125626] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
609[ 2.125713] usb 1-1.1: Product: Integrated Smart Card Reader
610[ 2.125783] usb 1-1.1: Manufacturer: Lenovo
611[ 2.151559] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
612[ 2.151657] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
613[ 2.152501] hub 4-1.5:1.0: USB hub found
614[ 2.152853] hub 4-1.5:1.0: 6 ports detected
615[ 2.206567] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
616[ 2.293705] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
617[ 2.294201] ata3.00: supports DRM functions and may not be fully accessible
618[ 2.294384] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133
619[ 2.294459] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
620[ 2.295438] ata3.00: Trusted Computing capability qword not valid!
621[ 2.296068] ata3.00: supports DRM functions and may not be fully accessible
622[ 2.297235] ata3.00: Trusted Computing capability qword not valid!
623[ 2.297245] ata3.00: configured for UDMA/133
624[ 2.297783] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5
625[ 2.316206] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
626[ 2.316304] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
627[ 2.316390] usb 1-1.3: Product: Biometric Coprocessor
628[ 2.316458] usb 1-1.3: Manufacturer: Auth
629[ 2.394563] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
630[ 2.442573] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci
631[ 2.507291] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
632[ 2.507389] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
633[ 2.507476] usb 1-1.4: Product: BCM20702A0
634[ 2.507543] usb 1-1.4: Manufacturer: Broadcom Corp
635[ 2.507611] usb 1-1.4: SerialNumber: B8763FA9D32E
636[ 2.556493] usb 4-1.5.1: New USB device found, idVendor=17ef, idProduct=604d, bcdDevice= 1.22
637[ 2.556590] usb 4-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
638[ 2.556681] usb 4-1.5.1: Product: Lenovo USB Receiver
639[ 2.567858] hidraw: raw HID events driver (C) Jiri Kosina
640[ 2.577107] usbcore: registered new interface driver usbhid
641[ 2.577165] usbhid: USB HID core driver
642[ 2.579173] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:17EF:604D.0001/input/input5
643[ 2.586601] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
644[ 2.613412] ata5: SATA link down (SStatus 0 SControl 300)
645[ 2.626984] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
646[ 2.627066] sd 0:0:0:0: [sda] Write Protect is off
647[ 2.627126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
648[ 2.627137] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
649[ 2.627346] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
650[ 2.627410] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
651[ 2.627418] sd 1:0:0:0: [sdb] 4096-byte physical blocks
652[ 2.627488] sd 2:0:0:0: [sdc] 4096-byte physical blocks
653[ 2.627548] sd 1:0:0:0: [sdb] Write Protect is off
654[ 2.627607] sd 2:0:0:0: [sdc] Write Protect is off
655[ 2.627655] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
656[ 2.627713] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
657[ 2.627718] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
658[ 2.627722] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
659[ 2.628177] sdc: sdc1 sdc2 sdc3
660[ 2.628516] sd 2:0:0:0: [sdc] Attached SCSI disk
661[ 2.629026] sda: sda1 sda2 < sda5 >
662[ 2.629287] sd 0:0:0:0: [sda] Attached SCSI disk
663[ 2.633731] sdb: sdb1
664[ 2.633966] sd 1:0:0:0: [sdb] Attached SCSI disk
665[ 2.638494] usb 4-1.5.2: new low-speed USB device number 5 using ehci-pci
666[ 2.643188] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input0
667[ 2.643451] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:17EF:604D.0002/input/input6
668[ 2.643733] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input1
669[ 2.644021] input: Lenovo USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input7
670[ 2.683625] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
671[ 2.702634] input: Lenovo USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input8
672[ 2.702807] input: Lenovo USB Receiver Keypad as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input9
673[ 2.702927] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
674[ 2.703011] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
675[ 2.703098] usb 1-1.6: Product: Integrated Camera
676[ 2.703164] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
677[ 2.703447] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
678[ 2.757247] usb 4-1.5.2: New USB device found, idVendor=0a81, idProduct=0205, bcdDevice= 0.10
679[ 2.757341] usb 4-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
680[ 2.757415] usb 4-1.5.2: Product: PS2 to USB Converter
681[ 2.757475] usb 4-1.5.2: Manufacturer: CHESEN
682[ 2.765404] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:0A81:0205.0004/input/input10
683[ 2.822805] hid-generic 0003:0A81:0205.0004: input,hidraw3: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.5.2/input0
684[ 2.830359] input: CHESEN PS2 to USB Converter Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:0A81:0205.0005/input/input11
685[ 2.830495] input: CHESEN PS2 to USB Converter System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:0A81:0205.0005/input/input12
686[ 2.884573] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4
687[ 2.890699] input: CHESEN PS2 to USB Converter Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:0A81:0205.0005/input/input13
688[ 2.890919] hid-generic 0003:0A81:0205.0005: input,hidraw4: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.0-1.5.2/input1
689[ 2.974489] usb 4-1.5.6: new high-speed USB device number 6 using ehci-pci
690[ 3.002481] raid6: sse2x1 gen() 10489 MB/s
691[ 3.070485] raid6: sse2x1 xor() 7777 MB/s
692[ 3.099327] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
693[ 3.099401] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
694[ 3.100500] hub 4-1.5.6:1.0: USB hub found
695[ 3.100861] hub 4-1.5.6:1.0: 4 ports detected
696[ 3.138485] raid6: sse2x2 gen() 12668 MB/s
697[ 3.206481] raid6: sse2x2 xor() 8773 MB/s
698[ 3.274480] raid6: sse2x4 gen() 15363 MB/s
699[ 3.342481] raid6: sse2x4 xor() 10294 MB/s
700[ 3.342543] raid6: using algorithm sse2x4 gen() 15363 MB/s
701[ 3.342597] raid6: .... xor() 10294 MB/s, rmw enabled
702[ 3.342650] raid6: using ssse3x2 recovery algorithm
703[ 3.343456] xor: automatically using best checksumming function avx
704[ 3.343902] async_tx: api initialized (async)
705[ 3.398580] usb 4-1.5.6.1: new high-speed USB device number 7 using ehci-pci
706[ 3.497416] device-mapper: uevent: version 1.0.3
707[ 3.497804] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
708[ 3.507530] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
709[ 3.507622] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
710[ 3.509869] hub 4-1.5.6.1:1.0: USB hub found
711[ 3.510223] hub 4-1.5.6.1:1.0: 4 ports detected
712[ 3.798574] usb 4-1.5.6.1.2: new full-speed USB device number 8 using ehci-pci
713[ 3.913857] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02
714[ 3.913862] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
715[ 3.913865] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller
716[ 3.913868] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc.
717[ 3.994574] usb 4-1.5.6.1.3: new full-speed USB device number 9 using ehci-pci
718[ 4.104342] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00
719[ 4.104347] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
720[ 4.104350] usb 4-1.5.6.1.3: Product: USB-Serial Controller D
721[ 4.104353] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc.
722[ 10.709268] NET: Registered protocol family 38
723[ 11.053427] PM: Image not found (code -22)
724[ 11.059462] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
725[ 11.059465] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
726[ 11.059470] PM: Marking nosave pages: [mem 0x7ff21000-0xffffffff]
727[ 11.062106] PM: Basic memory bitmaps created
728[ 11.063168] PM: Basic memory bitmaps freed
729[ 11.256682] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
730[ 11.453016] systemd[1]: Inserted module 'autofs4'
731[ 11.470883] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
732[ 11.490696] systemd[1]: Detected architecture x86-64.
733[ 11.496131] systemd[1]: Set hostname to <TP-T430s>.
734[ 11.612675] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
735[ 11.628587] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
736[ 11.652959] systemd[1]: Created slice system-getty.slice.
737[ 11.653426] systemd[1]: Listening on initctl Compatibility Named Pipe.
738[ 11.653793] systemd[1]: Reached target User and Group Name Lookups.
739[ 11.654156] systemd[1]: Reached target Remote File Systems.
740[ 11.654614] systemd[1]: Listening on LVM2 poll daemon socket.
741[ 11.682611] loop: module loaded
742[ 11.695399] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
743[ 11.715103] lp: driver loaded but no devices found
744[ 11.719894] ppdev: user-space parallel port driver
745[ 11.830376] systemd-journald[388]: Received request to flush runtime journal from PID 1
746[ 11.884983] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input14
747[ 11.885354] ACPI: Sleep Button [SLPB]
748[ 11.885725] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input15
749[ 11.885808] ACPI: Lid Switch [LID]
750[ 11.885932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input16
751[ 11.886012] ACPI: Power Button [PWRF]
752[ 11.931572] ACPI: AC Adapter [AC] (on-line)
753[ 11.941072] battery: ACPI: Battery Slot [BAT0] (battery present)
754[ 11.941262] battery: ACPI: Battery Slot [BAT1] (battery absent)
755[ 11.943628] Non-volatile memory driver v1.3
756[ 11.951189] thinkpad_acpi: ThinkPad ACPI Extras v0.26
757[ 11.951250] thinkpad_acpi: http://ibm-acpi.sf.net/
758[ 11.951308] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-1103-g5a38572fd9, EC G7HT39WW-3.22
759[ 11.951379] thinkpad_acpi: Lenovo ThinkPad T430s, model 23552L1
760[ 11.962504] thinkpad_acpi: radio switch found; radios are enabled
761[ 11.965578] iTCO_vendor_support: vendor-support=0
762[ 11.966670] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
763[ 11.966864] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
764[ 11.966940] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
765[ 11.967738] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
766[ 11.967845] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
767[ 11.969092] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
768[ 11.969210] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
769[ 11.972316] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
770[ 11.973060] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
771[ 11.987761] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
772[ 11.987901] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
773[ 11.989970] thinkpad_acpi: battery 1 registered (start 0, stop 100)
774[ 11.989975] battery: new extension: ThinkPad Battery Extension
775[ 11.990144] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17
776[ 11.995868] sd 0:0:0:0: Attached scsi generic sg0 type 0
777[ 11.996035] sd 1:0:0:0: Attached scsi generic sg1 type 0
778[ 11.996142] sd 2:0:0:0: Attached scsi generic sg2 type 0
779[ 12.031122] wl: loading out-of-tree module taints kernel.
780[ 12.031186] wl: module license 'MIXED/Proprietary' taints kernel.
781[ 12.031245] Disabling lock debugging due to kernel taint
782[ 12.033036] wl: module verification failed: signature and/or required key missing - tainting kernel
783[ 12.057193] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
784
785[ 12.063690] input: PC Speaker as /devices/platform/pcspkr/input/input18
786[ 12.119558] [drm] Replacing VGA console driver
787[ 12.120539] Console: switching to colour dummy device 80x25
788[ 12.130075] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
789[ 12.130082] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
790[ 12.130085] RAPL PMU: hw unit of domain package 2^-16 Joules
791[ 12.130088] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
792[ 12.171423] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
793[ 12.171430] [drm] Driver supports precise vblank timestamp query.
794[ 12.171713] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
795[ 12.233539] intel_rapl: Found RAPL domain package
796[ 12.233545] intel_rapl: Found RAPL domain core
797[ 12.233548] intel_rapl: Found RAPL domain uncore
798[ 12.253142] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
799[ 12.257957] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
800[ 12.327992] wl 0000:01:00.0 wlp1s0: renamed from wlan0
801[ 12.355017] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS
802[ 12.426704] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
803[ 12.479445] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
804[ 12.479623] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
805[ 12.491446] audit: type=1400 audit(1553162455.987:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=664 comm="apparmor_parser"
806[ 12.491456] audit: type=1400 audit(1553162455.987:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=664 comm="apparmor_parser"
807[ 12.491460] audit: type=1400 audit(1553162455.987:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=664 comm="apparmor_parser"
808[ 12.493129] audit: type=1400 audit(1553162455.987:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=666 comm="apparmor_parser"
809[ 12.493295] audit: type=1400 audit(1553162455.987:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=663 comm="apparmor_parser"
810[ 12.493922] audit: type=1400 audit(1553162455.987:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=665 comm="apparmor_parser"
811[ 12.496048] audit: type=1400 audit(1553162455.991:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=677 comm="apparmor_parser"
812[ 12.496801] audit: type=1400 audit(1553162455.991:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=675 comm="apparmor_parser"
813[ 12.498956] audit: type=1400 audit(1553162455.995:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=678 comm="apparmor_parser"
814[ 12.499277] audit: type=1400 audit(1553162455.995:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=674 comm="apparmor_parser"
815[ 12.503218] acpi device:0d: registered as cooling_device6
816[ 12.503288] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19
817[ 12.503422] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
818[ 12.816977] fbcon: inteldrmfb (fb0) is primary device
819[ 13.620669] Console: switching to colour frame buffer device 200x67
820[ 13.646249] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
821[ 13.692877] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
822[ 13.692879] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
823[ 13.692880] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
824[ 13.692881] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
825[ 13.692882] snd_hda_codec_realtek hdaudioC0D0: inputs:
826[ 13.692883] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
827[ 13.692884] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
828[ 13.692885] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
829[ 13.708660] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
830[ 13.709135] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
831[ 13.709210] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
832[ 13.709278] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
833[ 13.709345] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
834[ 13.709410] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
835[ 13.709477] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
836[ 13.709536] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
837[ 13.871261] media: Linux media interface: v0.10
838[ 13.877989] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
839[ 13.881062] videodev: Linux video capture interface: v2.00
840[ 13.913731] Bluetooth: Core ver 2.22
841[ 13.913745] NET: Registered protocol family 31
842[ 13.913746] Bluetooth: HCI device and connection manager initialized
843[ 13.913748] Bluetooth: HCI socket layer initialized
844[ 13.913750] Bluetooth: L2CAP socket layer initialized
845[ 13.913755] Bluetooth: SCO socket layer initialized
846[ 13.921044] usbcore: registered new interface driver btusb
847[ 13.963274] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
848[ 13.969327] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
849[ 13.969328] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
850[ 13.969330] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
851[ 13.969331] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
852[ 13.969394] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input28
853[ 13.969470] usbcore: registered new interface driver uvcvideo
854[ 13.969471] USB Video Class driver (1.1.1)
855[ 14.032828] Bluetooth: hci0: BCM: chip id 63
856[ 14.033824] Bluetooth: hci0: BCM: features 0x07
857[ 14.049909] Bluetooth: hci0: TP-T430s
858[ 14.050866] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
859[ 14.052972] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd
860[ 14.331864] Process accounting resumed
861[ 14.515127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
862[ 14.516284] Bluetooth: BNEP filters: protocol multicast
863[ 14.517412] Bluetooth: BNEP socket layer initialized
864[ 14.701623] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
865[ 14.900759] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
866[ 14.916778] Bluetooth: hci0: Broadcom Bluetooth Device
867[ 14.936068] aufs 4.19.17+-20190211
868[ 14.970653] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
869[ 14.975319] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
870[ 15.142633] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
871[ 15.801426] usblp 4-1.5.6.1.2:1.0: usblp1: USB Bidirectional printer dev 8 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
872[ 15.801460] usbcore: registered new interface driver usblp
873[ 15.828652] usbcore: registered new interface driver usbserial_generic
874[ 15.828663] usbserial: USB Serial support registered for generic
875[ 15.831962] usbcore: registered new interface driver pl2303
876[ 15.831977] usbserial: USB Serial support registered for pl2303
877[ 15.832022] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected
878[ 15.834326] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0
879[ 17.744427] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
880[ 17.744466] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
881[ 18.538264] Bluetooth: RFCOMM TTY layer initialized
882[ 18.538273] Bluetooth: RFCOMM socket layer initialized
883[ 18.538279] Bluetooth: RFCOMM ver 1.11
884[ 23.120686] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
885[ 25.162649] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1
886[ 26.002862] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1
887[ 26.838905] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1
888[ 29.005467] fuse init (API version 7.27)
889[ 31.292922] rfkill: input handler disabled
890[ 31.937024] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
891[ 32.141995] vboxdrv: Found 4 processor cores
892[ 32.165994] vboxdrv: TSC mode is Invariant, tentative frequency 2893426182 Hz
893[ 32.165998] vboxdrv: Successfully loaded version 6.0.4_Debian (interface 0x00290008)
894[ 32.208144] VBoxNetFlt: Successfully started.
895[ 32.225891] VBoxNetAdp: Successfully started.
896[ 32.243317] VBoxPciLinuxInit
897[ 32.249709] vboxpci: IOMMU not found (not registered)
898[ 32.523755] kauditd_printk_skb: 20 callbacks suppressed
899[ 32.523756] audit: type=1400 audit(1553162476.019:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2622 comm="apparmor_parser"
900[ 32.593114] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
901[ 32.595461] Bridge firewalling registered
902[ 32.740064] Initializing XFRM netlink socket
903[ 32.841108] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
904[ 33.026876] audit: type=1400 audit(1553162476.523:33): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=1243 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
905[ 33.027420] audit: type=1400 audit(1553162476.523:34): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=1243 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0