blob: a70bc4f35f3c0c80f2ab3d0730c80b4c946156b1 [file] [log] [blame]
ExPLITeca1f512020-01-02 00:34:38 +01001[ 0.000000] Linux version 5.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191130 (Debian 9.2.1-21)) #1 SMP Debian 5.4.6-1 (2019-12-27)
2[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
3[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
4[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
5[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
6[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
7[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
8[ 0.000000] BIOS-provided physical RAM map:
9[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
10[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff26fff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000007ff27000-0x00000000829fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
18[ 0.000000] NX (Execute Disable) protection: active
19[ 0.000000] SMBIOS 2.8 present.
20[ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.11-659-gef4fe3e37c 01/01/2020
21[ 0.000000] tsc: Fast TSC calibration using PIT
22[ 0.000000] tsc: Detected 2893.504 MHz processor
23[ 0.002031] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
24[ 0.002032] e820: remove [mem 0x000a0000-0x000fffff] usable
25[ 0.002035] last_pfn = 0x47b600 max_arch_pfn = 0x400000000
26[ 0.002040] MTRR default type: write-back
27[ 0.002040] MTRR fixed ranges enabled:
28[ 0.002041] 00000-9FFFF write-back
29[ 0.002042] A0000-BFFFF uncachable
30[ 0.002043] C0000-FFFFF write-back
31[ 0.002043] MTRR variable ranges enabled:
32[ 0.002044] 0 base 080000000 mask FC0000000 uncachable
33[ 0.002045] 1 base 0C0000000 mask FF0000000 uncachable
34[ 0.002046] 2 base 0D0000000 mask FF0000000 write-combining
35[ 0.002047] 3 base 0E0000000 mask FE0000000 uncachable
36[ 0.002047] 4 disabled
37[ 0.002047] 5 disabled
38[ 0.002048] 6 disabled
39[ 0.002048] 7 disabled
40[ 0.002049] 8 disabled
41[ 0.002049] 9 disabled
42[ 0.002328] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
43[ 0.002687] last_pfn = 0x7ff27 max_arch_pfn = 0x400000000
44[ 0.012087] BRK [0x401601000, 0x401601fff] PGTABLE
45[ 0.012089] BRK [0x401602000, 0x401602fff] PGTABLE
46[ 0.012090] BRK [0x401603000, 0x401603fff] PGTABLE
47[ 0.012107] BRK [0x401604000, 0x401604fff] PGTABLE
48[ 0.012108] BRK [0x401605000, 0x401605fff] PGTABLE
49[ 0.012108] BRK [0x401606000, 0x401606fff] PGTABLE
50[ 0.012209] BRK [0x401607000, 0x401607fff] PGTABLE
51[ 0.012221] BRK [0x401608000, 0x401608fff] PGTABLE
52[ 0.012382] RAMDISK: [mem 0x30d7f000-0x346b6fff]
53[ 0.012388] ACPI: Early table checksum verification disabled
54[ 0.012390] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4)
55[ 0.012394] ACPI: XSDT 0x000000007FF4D0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
56[ 0.012399] ACPI: FACP 0x000000007FF50C40 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703)
57[ 0.012403] ACPI: DSDT 0x000000007FF4D280 0039C0 (v02 COREv4 COREBOOT 20110725 INTL 20190703)
58[ 0.012407] ACPI: FACS 0x000000007FF4D240 000040
59[ 0.012409] ACPI: FACS 0x000000007FF4D240 000040
60[ 0.012411] ACPI: SSDT 0x000000007FF50D40 001B03 (v02 COREv4 COREBOOT 0000002A CORE 20190703)
61[ 0.012414] ACPI: MCFG 0x000000007FF52850 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
62[ 0.012416] ACPI: TCPA 0x000000007FF52890 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703)
63[ 0.012419] ACPI: APIC 0x000000007FF528D0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703)
64[ 0.012421] ACPI: DMAR 0x000000007FF52940 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
65[ 0.012424] ACPI: HPET 0x000000007FF54A10 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
66[ 0.012431] ACPI: Local APIC address 0xfee00000
67[ 0.012502] No NUMA configuration found
68[ 0.012503] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
69[ 0.012507] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff]
70[ 0.012536] Zone ranges:
71[ 0.012537] DMA [mem 0x0000000000001000-0x0000000000ffffff]
72[ 0.012538] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
73[ 0.012539] Normal [mem 0x0000000100000000-0x000000047b5fffff]
74[ 0.012540] Device empty
75[ 0.012541] Movable zone start for each node
76[ 0.012542] Early memory node ranges
77[ 0.012543] node 0: [mem 0x0000000000001000-0x000000000009efff]
78[ 0.012544] node 0: [mem 0x0000000000100000-0x000000007ff26fff]
79[ 0.012545] node 0: [mem 0x0000000100000000-0x000000047b5fffff]
80[ 0.012555] Zeroed struct page in unavailable ranges: 315 pages
81[ 0.012556] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
82[ 0.012558] On node 0 totalpages: 4175045
83[ 0.012558] DMA zone: 64 pages used for memmap
84[ 0.012559] DMA zone: 21 pages reserved
85[ 0.012560] DMA zone: 3998 pages, LIFO batch:0
86[ 0.012608] DMA32 zone: 8125 pages used for memmap
87[ 0.012609] DMA32 zone: 519975 pages, LIFO batch:63
88[ 0.020728] Normal zone: 57048 pages used for memmap
89[ 0.020729] Normal zone: 3651072 pages, LIFO batch:63
90[ 0.060760] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
91[ 0.060992] ACPI: PM-Timer IO Port: 0x508
92[ 0.060994] ACPI: Local APIC address 0xfee00000
93[ 0.061010] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
94[ 0.061012] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
95[ 0.061014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
96[ 0.061015] ACPI: IRQ0 used by override.
97[ 0.061016] ACPI: IRQ9 used by override.
98[ 0.061018] Using ACPI (MADT) for SMP configuration information
99[ 0.061019] ACPI: HPET id: 0x8086a701 base: 0xfed00000
100[ 0.061024] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
101[ 0.061034] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
102[ 0.061035] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
103[ 0.061036] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
104[ 0.061037] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
105[ 0.061038] PM: Registered nosave memory: [mem 0x7ff27000-0x829fffff]
106[ 0.061039] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
107[ 0.061039] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
108[ 0.061040] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
109[ 0.061041] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
110[ 0.061041] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
111[ 0.061042] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
112[ 0.061043] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
113[ 0.061044] [mem 0x82a00000-0xefffffff] available for PCI devices
114[ 0.061046] Booting paravirtualized kernel on bare hardware
115[ 0.061048] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
116[ 0.147715] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
117[ 0.147896] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u524288
118[ 0.147903] pcpu-alloc: s178584 r8192 d30312 u524288 alloc=1*2097152
119[ 0.147904] pcpu-alloc: [0] 0 1 2 3
120[ 0.147923] Built 1 zonelists, mobility grouping on. Total pages: 4109787
121[ 0.147924] Policy zone: Normal
122[ 0.147925] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
123[ 0.148718] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
124[ 0.149094] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
125[ 0.149142] mem auto-init: stack:off, heap alloc:off, heap free:off
126[ 0.152137] Calgary: detecting Calgary via BIOS EBDA area
127[ 0.152142] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
128[ 0.190521] Memory: 16263244K/16700180K available (10243K kernel code, 1196K rwdata, 3732K rodata, 1668K init, 2060K bss, 436936K reserved, 0K cma-reserved)
129[ 0.190625] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
130[ 0.190637] Kernel/User page tables isolation: enabled
131[ 0.190649] ftrace: allocating 33546 entries in 132 pages
132[ 0.201981] rcu: Hierarchical RCU implementation.
133[ 0.201984] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
134[ 0.201985] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
135[ 0.201986] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
136[ 0.204625] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
137[ 0.204833] random: crng done (trusting CPU's manufacturer)
138[ 0.206405] Console: colour VGA+ 80x25
139[ 0.211935] printk: console [tty0] enabled
140[ 0.212003] ACPI: Core revision 20190816
141[ 0.212120] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
142[ 0.212203] APIC: Switch to symmetric I/O mode setup
143[ 0.212259] DMAR: Host address width 36
144[ 0.212315] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
145[ 0.212374] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
146[ 0.212444] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
147[ 0.212503] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
148[ 0.212563] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
149[ 0.212633] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
150[ 0.212691] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
151[ 0.212746] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
152[ 0.213213] DMAR-IR: Enabled IRQ remapping in x2apic mode
153[ 0.213271] x2apic enabled
154[ 0.213330] Switched APIC routing to cluster x2apic.
155[ 0.213819] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
156[ 0.232203] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b54aaf87d, max_idle_ns: 440795332947 ns
157[ 0.232278] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.00 BogoMIPS (lpj=11574016)
158[ 0.232353] pid_max: default: 32768 minimum: 301
159[ 0.232433] LSM: Security Framework initializing
160[ 0.232495] Yama: disabled by default; enable with sysctl kernel.yama.*
161[ 0.232570] AppArmor: AppArmor initialized
162[ 0.232626] TOMOYO Linux initialized
163[ 0.232719] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
164[ 0.232813] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
165[ 0.233096] mce: CPU0: Thermal monitoring enabled (TM1)
166[ 0.233160] process: using mwait in idle threads
167[ 0.233218] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
168[ 0.233277] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
169[ 0.233337] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
170[ 0.233408] Spectre V2 : Mitigation: Full generic retpoline
171[ 0.233462] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
172[ 0.233531] Spectre V2 : Enabling Restricted Speculation for firmware calls
173[ 0.233590] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
174[ 0.233661] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
175[ 0.233719] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
176[ 0.233793] MDS: Mitigation: Clear CPU buffers
177[ 0.233998] Freeing SMP alternatives memory: 24K
178[ 0.235642] TSC deadline timer enabled
179[ 0.235645] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
180[ 0.235814] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
181[ 0.235890] ... version: 3
182[ 0.235947] ... bit width: 48
183[ 0.236003] ... generic registers: 4
184[ 0.236058] ... value mask: 0000ffffffffffff
185[ 0.236115] ... max period: 00007fffffffffff
186[ 0.236172] ... fixed-purpose events: 3
187[ 0.236226] ... event mask: 000000070000000f
188[ 0.236276] rcu: Hierarchical SRCU implementation.
189[ 0.236276] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
190[ 0.236276] smp: Bringing up secondary CPUs ...
191[ 0.236276] x86: Booting SMP configuration:
192[ 0.236276] .... node #0, CPUs: #1
193[ 0.236359] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
194[ 0.236525] #2 #3
195[ 0.242356] smp: Brought up 1 node, 4 CPUs
196[ 0.242356] smpboot: Max logical packages: 1
197[ 0.242356] smpboot: Total of 4 processors activated (23148.03 BogoMIPS)
198[ 0.242356] devtmpfs: initialized
199[ 0.242356] x86/mm: Memory block size: 128MB
200[ 0.245627] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
201[ 0.245627] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
202[ 0.245627] pinctrl core: initialized pinctrl subsystem
203[ 0.245627] NET: Registered protocol family 16
204[ 0.245627] audit: initializing netlink subsys (disabled)
205[ 0.245627] audit: type=2000 audit(1577921548.032:1): state=initialized audit_enabled=0 res=1
206[ 0.245627] cpuidle: using governor ladder
207[ 0.245627] cpuidle: using governor menu
208[ 0.245627] ACPI: bus type PCI registered
209[ 0.245627] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
210[ 0.245887] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
211[ 0.245960] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
212[ 0.246026] PCI: Using configuration type 1 for base access
213[ 0.246098] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
214[ 0.249019] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
215[ 0.396476] ACPI: Added _OSI(Module Device)
216[ 0.396476] ACPI: Added _OSI(Processor Device)
217[ 0.396476] ACPI: Added _OSI(3.0 _SCP Extensions)
218[ 0.396513] ACPI: Added _OSI(Processor Aggregator Device)
219[ 0.396571] ACPI: Added _OSI(Linux-Dell-Video)
220[ 0.396626] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
221[ 0.396683] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
222[ 0.400279] ACPI: 2 ACPI AML tables successfully acquired and loaded
223[ 0.401017] ACPI: EC: EC started
224[ 0.401072] ACPI: EC: interrupt blocked
225[ 0.401394] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
226[ 0.401453] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
227[ 0.401522] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
228[ 0.401590] ACPI: Interpreter enabled
229[ 0.401658] ACPI: (supports S0 S3 S4 S5)
230[ 0.401715] ACPI: Using IOAPIC for interrupt routing
231[ 0.401784] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
232[ 0.401964] ACPI: Enabled 1 GPEs in block 00 to 3F
233[ 0.405044] ACPI: Power Resource [FPWR] (off)
234[ 0.405343] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
235[ 0.405406] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
236[ 0.405513] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
237[ 0.405592] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
238[ 0.405706] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
239[ 0.405784] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])
240[ 0.405990] PCI host bridge to bus 0000:00
241[ 0.406047] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
242[ 0.406106] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
243[ 0.406166] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
244[ 0.406236] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
245[ 0.406303] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
246[ 0.406373] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
247[ 0.406444] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
248[ 0.406513] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
249[ 0.406582] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
250[ 0.406652] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
251[ 0.406723] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
252[ 0.406794] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
253[ 0.406863] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
254[ 0.406933] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
255[ 0.407002] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
256[ 0.407070] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
257[ 0.407138] pci_bus 0000:00: root bus resource [bus 00-ff]
258[ 0.407200] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
259[ 0.407346] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
260[ 0.407414] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit]
261[ 0.407478] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
262[ 0.407549] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
263[ 0.407676] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
264[ 0.407740] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit]
265[ 0.407883] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
266[ 0.407962] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit]
267[ 0.408085] pci 0000:00:14.0: PME# supported from D3hot D3cold
268[ 0.408218] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
269[ 0.408296] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff]
270[ 0.408360] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff]
271[ 0.408424] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
272[ 0.408540] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
273[ 0.408659] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
274[ 0.408737] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff]
275[ 0.408875] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
276[ 0.409005] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
277[ 0.409083] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit]
278[ 0.409212] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
279[ 0.409344] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
280[ 0.409554] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
281[ 0.409639] pci 0000:00:1c.0: Enabling MPC IRBNCE
282[ 0.409698] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
283[ 0.409835] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
284[ 0.410071] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
285[ 0.410157] pci 0000:00:1c.1: Enabling MPC IRBNCE
286[ 0.410214] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
287[ 0.410352] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400
288[ 0.410585] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
289[ 0.410668] pci 0000:00:1c.2: Enabling MPC IRBNCE
290[ 0.410726] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
291[ 0.410865] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
292[ 0.410944] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff]
293[ 0.411082] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
294[ 0.411213] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
295[ 0.411435] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
296[ 0.411512] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087]
297[ 0.411577] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093]
298[ 0.411641] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f]
299[ 0.411704] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097]
300[ 0.411768] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
301[ 0.411832] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff]
302[ 0.411931] pci 0000:00:1f.2: PME# supported from D3hot
303[ 0.412053] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
304[ 0.412128] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit]
305[ 0.412205] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
306[ 0.412344] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
307[ 0.412423] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit]
308[ 0.412697] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000
309[ 0.412852] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit]
310[ 0.412969] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit]
311[ 0.413276] pci 0000:01:00.0: supports D1 D2
312[ 0.413332] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
313[ 0.413661] pci 0000:00:1c.0: PCI bridge to [bus 01]
314[ 0.413724] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
315[ 0.414103] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
316[ 0.414393] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
317[ 0.414694] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff]
318[ 0.415260] pci 0000:02:00.0: supports D1 D2
319[ 0.415316] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
320[ 0.415934] pci 0000:00:1c.1: PCI bridge to [bus 02]
321[ 0.415995] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
322[ 0.416055] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
323[ 0.416122] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
324[ 0.416261] pci 0000:00:1c.2: PCI bridge to [bus 03]
325[ 0.416282] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
326[ 0.416344] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
327[ 0.416410] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
328[ 0.416630] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
329[ 0.416726] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
330[ 0.416822] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
331[ 0.416916] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
332[ 0.417009] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
333[ 0.417100] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
334[ 0.417193] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
335[ 0.417286] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
336[ 0.417905] ACPI: EC: interrupt unblocked
337[ 0.417968] ACPI: EC: event unblocked
338[ 0.418028] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
339[ 0.418097] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
340[ 0.418214] iommu: Default domain type: Translated
341[ 0.418280] pci 0000:00:02.0: vgaarb: setting as boot VGA device
342[ 0.418280] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
343[ 0.418280] pci 0000:00:02.0: vgaarb: bridge control possible
344[ 0.418280] vgaarb: loaded
345[ 0.418280] EDAC MC: Ver: 3.0.0
346[ 0.418280] PCI: Using ACPI for IRQ routing
347[ 0.420537] PCI: pci_cache_line_size set to 64 bytes
348[ 0.421052] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
349[ 0.421053] e820: reserve RAM buffer [mem 0x7ff27000-0x7fffffff]
350[ 0.421054] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
351[ 0.421634] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
352[ 0.421695] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
353[ 0.423774] clocksource: Switched to clocksource tsc-early
354[ 0.429305] VFS: Disk quotas dquot_6.6.0
355[ 0.429377] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
356[ 0.429531] AppArmor: AppArmor Filesystem Enabled
357[ 0.429608] pnp: PnP ACPI init
358[ 0.429796] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
359[ 0.429905] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
360[ 0.429965] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
361[ 0.430024] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
362[ 0.430084] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
363[ 0.431347] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
364[ 0.431407] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
365[ 0.431465] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
366[ 0.431524] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
367[ 0.431582] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
368[ 0.431640] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
369[ 0.431704] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
370[ 0.432129] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
371[ 0.432191] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
372[ 0.432223] system 00:02: [io 0x0500-0x057f] has been reserved
373[ 0.432289] system 00:02: [io 0x0480-0x04bf] has been reserved
374[ 0.432351] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
375[ 0.432367] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
376[ 0.432390] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
377[ 0.432409] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
378[ 0.432429] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
379[ 0.432445] pnp: PnP ACPI: found 7 devices
380[ 0.433506] thermal_sys: Registered thermal governor 'fair_share'
381[ 0.433507] thermal_sys: Registered thermal governor 'bang_bang'
382[ 0.433564] thermal_sys: Registered thermal governor 'step_wise'
383[ 0.433623] thermal_sys: Registered thermal governor 'user_space'
384[ 0.438176] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
385[ 0.438339] pci 0000:00:1c.0: PCI bridge to [bus 01]
386[ 0.438402] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
387[ 0.438472] pci 0000:00:1c.1: PCI bridge to [bus 02]
388[ 0.438531] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
389[ 0.438594] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
390[ 0.438655] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
391[ 0.438732] pci 0000:00:1c.2: PCI bridge to [bus 03]
392[ 0.438791] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
393[ 0.438855] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
394[ 0.438919] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
395[ 0.438996] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
396[ 0.439055] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
397[ 0.439112] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
398[ 0.439171] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
399[ 0.439231] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
400[ 0.439288] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
401[ 0.439348] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
402[ 0.439408] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
403[ 0.439467] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
404[ 0.439526] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
405[ 0.439586] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
406[ 0.439646] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
407[ 0.439705] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
408[ 0.439761] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
409[ 0.439818] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window]
410[ 0.439877] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
411[ 0.439937] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff]
412[ 0.439996] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
413[ 0.440052] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
414[ 0.440111] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
415[ 0.440180] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
416[ 0.440237] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff]
417[ 0.440298] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref]
418[ 0.440430] NET: Registered protocol family 2
419[ 0.440614] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
420[ 0.440701] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
421[ 0.440915] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
422[ 0.441084] TCP: Hash tables configured (established 131072 bind 65536)
423[ 0.441163] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
424[ 0.441250] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
425[ 0.441375] NET: Registered protocol family 1
426[ 0.441434] NET: Registered protocol family 44
427[ 0.441500] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
428[ 0.442337] PCI: CLS 64 bytes, default 64
429[ 0.442428] Trying to unpack rootfs image as initramfs...
430[ 1.184885] Freeing initrd memory: 58592K
431[ 1.185005] DMAR: No ATSR found
432[ 1.185084] DMAR: dmar0: Using Queued invalidation
433[ 1.185148] DMAR: dmar1: Using Queued invalidation
434[ 1.255051] pci 0000:00:00.0: Adding to iommu group 0
435[ 1.257944] pci 0000:00:02.0: Adding to iommu group 1
436[ 1.258258] pci 0000:00:02.0: Using iommu direct mapping
437[ 1.258342] pci 0000:00:04.0: Adding to iommu group 2
438[ 1.258434] pci 0000:00:14.0: Adding to iommu group 3
439[ 1.258521] pci 0000:00:19.0: Adding to iommu group 4
440[ 1.258614] pci 0000:00:1a.0: Adding to iommu group 5
441[ 1.258701] pci 0000:00:1b.0: Adding to iommu group 6
442[ 1.258794] pci 0000:00:1c.0: Adding to iommu group 7
443[ 1.258882] pci 0000:00:1c.1: Adding to iommu group 8
444[ 1.258974] pci 0000:00:1c.2: Adding to iommu group 9
445[ 1.259070] pci 0000:00:1d.0: Adding to iommu group 10
446[ 1.259167] pci 0000:00:1f.0: Adding to iommu group 11
447[ 1.259233] pci 0000:00:1f.2: Adding to iommu group 11
448[ 1.259299] pci 0000:00:1f.3: Adding to iommu group 11
449[ 1.259366] pci 0000:00:1f.6: Adding to iommu group 11
450[ 1.259459] pci 0000:01:00.0: Adding to iommu group 12
451[ 1.259548] pci 0000:02:00.0: Adding to iommu group 13
452[ 1.259609] DMAR: Intel(R) Virtualization Technology for Directed I/O
453[ 1.261452] Initialise system trusted keyrings
454[ 1.261519] Key type blacklist registered
455[ 1.261611] workingset: timestamp_bits=40 max_order=22 bucket_order=0
456[ 1.262674] zbud: loaded
457[ 1.262921] Platform Keyring initialized
458[ 1.262980] Key type asymmetric registered
459[ 1.263036] Asymmetric key parser 'x509' registered
460[ 1.263099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
461[ 1.263203] io scheduler mq-deadline registered
462[ 1.263509] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
463[ 1.263774] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
464[ 1.263860] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
465[ 1.264183] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
466[ 1.264269] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
467[ 1.264478] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
468[ 1.264547] intel_idle: MWAIT substates: 0x21120
469[ 1.264548] intel_idle: v0.4.1 model 0x3A
470[ 1.264705] intel_idle: lapic_timer_reliable_states 0xffffffff
471[ 1.266005] thermal LNXTHERM:00: registered as thermal_zone0
472[ 1.266066] ACPI: Thermal Zone [THM0] (48 C)
473[ 1.266875] thermal LNXTHERM:01: registered as thermal_zone1
474[ 1.266934] ACPI: Thermal Zone [THM1] (27 C)
475[ 1.267085] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
476[ 1.267628] Linux agpgart interface v0.103
477[ 1.267726] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
478[ 1.267786] AMD-Vi: AMD IOMMUv2 functionality not available on this system
479[ 1.268058] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
480[ 1.269965] serio: i8042 KBD port at 0x60,0x64 irq 1
481[ 1.270026] serio: i8042 AUX port at 0x60,0x64 irq 12
482[ 1.270190] mousedev: PS/2 mouse device common for all mice
483[ 1.270283] rtc_cmos 00:03: RTC can wake from S4
484[ 1.270499] rtc_cmos 00:03: registered as rtc0
485[ 1.270567] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
486[ 1.270655] intel_pstate: Intel P-state driver initializing
487[ 1.270952] ledtrig-cpu: registered to indicate activity on CPUs
488[ 1.271181] drop_monitor: Initializing network drop monitor service
489[ 1.271609] NET: Registered protocol family 10
490[ 1.271786] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
491[ 1.291006] Segment Routing with IPv6
492[ 1.291115] mip6: Mobile IPv6
493[ 1.291182] NET: Registered protocol family 17
494[ 1.291376] mpls_gso: MPLS GSO support
495[ 1.291983] microcode: sig=0x306a9, pf=0x10, revision=0x21
496[ 1.292096] microcode: Microcode Update Driver: v2.2.
497[ 1.292103] IPI shorthand broadcast: enabled
498[ 1.292250] sched_clock: Marking stable (1284400578, 7469722)->(1299315406, -7445106)
499[ 1.292583] registered taskstats version 1
500[ 1.292650] Loading compiled-in X.509 certificates
501[ 1.328652] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
502[ 1.328735] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
503[ 1.328810] zswap: loaded using pool lzo/zbud
504[ 1.328958] Key type ._fscrypt registered
505[ 1.329014] Key type .fscrypt registered
506[ 1.329080] AppArmor: AppArmor sha1 policy hashing enabled
507[ 1.329397] rtc_cmos 00:03: setting system clock to 2020-01-01T23:32:29 UTC (1577921549)
508[ 1.330344] Freeing unused kernel image memory: 1668K
509[ 1.352346] Write protecting the kernel read-only data: 16384k
510[ 1.353255] Freeing unused kernel image memory: 2036K
511[ 1.353570] Freeing unused kernel image memory: 364K
512[ 1.367084] x86/mm: Checked W+X mappings: passed, no W+X pages found.
513[ 1.367141] x86/mm: Checking user space page tables
514[ 1.373257] x86/mm: Checked W+X mappings: passed, no W+X pages found.
515[ 1.373316] Run /init as init process
516[ 1.490833] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input3
517[ 1.490961] ACPI: Sleep Button [SLPB]
518[ 1.491081] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input4
519[ 1.491199] ACPI: Lid Switch [LID]
520[ 1.491311] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
521[ 1.491419] ACPI: Power Button [PWRF]
522[ 1.506257] pps_core: LinuxPPS API ver. 1 registered
523[ 1.506320] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
524[ 1.508089] PTP clock support registered
525[ 1.522637] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
526[ 1.522698] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
527[ 1.522910] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
528[ 1.529844] sdhci: Secure Digital Host Controller Interface driver
529[ 1.529907] sdhci: Copyright(c) Pierre Ossman
530[ 1.535902] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
531[ 1.538209] ACPI: bus type USB registered
532[ 1.538333] usbcore: registered new interface driver usbfs
533[ 1.538445] usbcore: registered new interface driver hub
534[ 1.538563] usbcore: registered new device driver usb
535[ 1.542738] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190816/utaddress-204)
536[ 1.542836] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
537[ 1.542915] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204)
538[ 1.543011] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
539[ 1.543085] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204)
540[ 1.543177] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
541[ 1.543251] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204)
542[ 1.543344] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
543[ 1.543421] lpc_ich: Resource conflict(s) found affecting gpio_ich
544[ 1.545553] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
545[ 1.546416] ehci-pci: EHCI PCI platform driver
546[ 1.546626] ehci-pci 0000:00:1a.0: EHCI Host Controller
547[ 1.546689] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
548[ 1.549181] ehci-pci 0000:00:1a.0: debug port 2
549[ 1.553158] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
550[ 1.554163] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000
551[ 1.558109] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
552[ 1.559103] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
553[ 1.559381] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
554[ 1.559630] cryptd: max_cpu_qlen set to 1000
555[ 1.561861] battery: ACPI: Battery Slot [BAT0] (battery present)
556[ 1.562069] battery: ACPI: Battery Slot [BAT1] (battery absent)
557[ 1.562519] SCSI subsystem initialized
558[ 1.565904] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
559[ 1.571284] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
560[ 1.571454] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
561[ 1.571525] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
562[ 1.571594] usb usb1: Product: EHCI Host Controller
563[ 1.571652] usb usb1: Manufacturer: Linux 5.4.0-1-amd64 ehci_hcd
564[ 1.571711] usb usb1: SerialNumber: 0000:00:1a.0
565[ 1.576640] hub 1-0:1.0: USB hub found
566[ 1.576708] hub 1-0:1.0: 3 ports detected
567[ 1.577296] xhci_hcd 0000:00:14.0: xHCI Host Controller
568[ 1.577361] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
569[ 1.577664] libata version 3.00 loaded.
570[ 1.578524] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
571[ 1.578601] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
572[ 1.578815] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
573[ 1.578887] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
574[ 1.578958] usb usb2: Product: xHCI Host Controller
575[ 1.579015] usb usb2: Manufacturer: Linux 5.4.0-1-amd64 xhci-hcd
576[ 1.579074] usb usb2: SerialNumber: 0000:00:14.0
577[ 1.579668] hub 2-0:1.0: USB hub found
578[ 1.579735] hub 2-0:1.0: 4 ports detected
579[ 1.579970] xhci_hcd 0000:00:14.0: xHCI Host Controller
580[ 1.580034] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
581[ 1.580108] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
582[ 1.580221] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
583[ 1.580316] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
584[ 1.580387] usb usb3: Product: xHCI Host Controller
585[ 1.580446] usb usb3: Manufacturer: Linux 5.4.0-1-amd64 xhci-hcd
586[ 1.580507] usb usb3: SerialNumber: 0000:00:14.0
587[ 1.580560] AVX version of gcm_enc/dec engaged.
588[ 1.580622] AES CTR mode by8 optimization enabled
589[ 1.581033] hub 3-0:1.0: USB hub found
590[ 1.581101] hub 3-0:1.0: 4 ports detected
591[ 1.581244] ehci-pci 0000:00:1d.0: EHCI Host Controller
592[ 1.581329] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
593[ 1.581414] ehci-pci 0000:00:1d.0: debug port 2
594[ 1.582251] ahci 0000:00:1f.2: version 3.0
595[ 1.582413] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
596[ 1.585384] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
597[ 1.585528] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000
598[ 1.592597] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
599[ 1.592677] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
600[ 1.600319] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
601[ 1.600445] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
602[ 1.600587] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
603[ 1.600659] usb usb4: Product: EHCI Host Controller
604[ 1.600720] usb usb4: Manufacturer: Linux 5.4.0-1-amd64 ehci_hcd
605[ 1.600781] usb usb4: SerialNumber: 0000:00:1d.0
606[ 1.602805] hub 4-0:1.0: USB hub found
607[ 1.602873] hub 4-0:1.0: 3 ports detected
608[ 1.603559] scsi host0: ahci
609[ 1.604974] scsi host1: ahci
610[ 1.606732] scsi host2: ahci
611[ 1.612319] scsi host3: ahci
612[ 1.620143] scsi host4: ahci
613[ 1.620322] scsi host5: ahci
614[ 1.620442] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31
615[ 1.620517] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31
616[ 1.620589] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31
617[ 1.620661] ata4: DUMMY
618[ 1.620720] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31
619[ 1.620792] ata6: DUMMY
620[ 1.648185] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
621[ 1.678293] i915 0000:00:02.0: VT-d active for gfx access
622[ 1.678357] i915 0000:00:02.0: vgaarb: deactivate vga console
623[ 1.679340] Console: switching to colour dummy device 80x25
624[ 1.679412] i915 0000:00:02.0: DMAR active, disabling use of stolen memory
625[ 1.730969] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
626[ 1.730976] [drm] Driver supports precise vblank timestamp query.
627[ 1.731345] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
628[ 1.744040] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66
629[ 1.744046] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
630[ 1.744087] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
631[ 1.745256] e1000e 0000:00:19.0 eno0: renamed from eth0
632[ 1.781861] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
633[ 1.782087] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
634[ 1.805579] acpi device:0d: registered as cooling_device5
635[ 1.805702] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
636[ 1.912289] usb 1-1: new high-speed USB device number 2 using ehci-pci
637[ 1.912310] usb 2-3: new high-speed USB device number 2 using xhci_hcd
638[ 1.934777] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
639[ 1.935662] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133
640[ 1.935666] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA
641[ 1.935849] ata1.00: configured for UDMA/133
642[ 1.936021] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5
643[ 1.936288] usb 4-1: new high-speed USB device number 2 using ehci-pci
644[ 2.072620] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
645[ 2.072625] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
646[ 2.072771] hub 1-1:1.0: USB hub found
647[ 2.072869] hub 1-1:1.0: 6 ports detected
648[ 2.082028] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21
649[ 2.082033] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
650[ 2.082037] usb 2-3: Product: USB2.0 Hub
651[ 2.082039] usb 2-3: Manufacturer: VIA Labs, Inc.
652[ 2.082935] hub 2-3:1.0: USB hub found
653[ 2.083128] hub 2-3:1.0: 4 ports detected
654[ 2.097106] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
655[ 2.097112] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
656[ 2.097389] hub 4-1:1.0: USB hub found
657[ 2.097626] hub 4-1:1.0: 8 ports detected
658[ 2.106578] fbcon: i915drmfb (fb0) is primary device
659[ 2.251403] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
660[ 2.269445] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
661[ 2.270927] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
662[ 2.288345] tsc: Refined TSC clocksource calibration: 2893.424 MHz
663[ 2.288361] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b4ff17552, max_idle_ns: 440795271382 ns
664[ 2.288405] clocksource: Switched to clocksource tsc
665[ 2.288933] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
666[ 2.288937] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
667[ 2.332560] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
668[ 2.332571] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
669[ 2.338780] ata2.00: configured for UDMA/133
670[ 2.348332] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
671[ 2.360371] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
672[ 2.372230] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
673[ 2.384354] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
674[ 2.413703] usb 3-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21
675[ 2.413707] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
676[ 2.413709] usb 3-3: Product: USB3.0 Hub
677[ 2.413711] usb 3-3: Manufacturer: VIA Labs, Inc.
678[ 2.416405] hub 3-3:1.0: USB hub found
679[ 2.416712] hub 3-3:1.0: 4 ports detected
680[ 2.470117] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
681[ 2.470120] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
682[ 2.470123] usb 1-1.3: Product: Biometric Coprocessor
683[ 2.470124] usb 1-1.3: Manufacturer: Auth
684[ 2.493175] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
685[ 2.493188] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
686[ 2.493764] hub 4-1.5:1.0: USB hub found
687[ 2.494086] hub 4-1.5:1.0: 6 ports detected
688[ 2.548353] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
689[ 2.663329] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
690[ 2.663402] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
691[ 2.663405] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
692[ 2.663715] ata3.00: supports DRM functions and may not be fully accessible
693[ 2.663871] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133
694[ 2.663874] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
695[ 2.664520] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
696[ 2.664523] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
697[ 2.664526] usb 1-1.4: Product: BCM20702A0
698[ 2.664528] usb 1-1.4: Manufacturer: Broadcom Corp
699[ 2.664529] usb 1-1.4: SerialNumber: B8763FA9D32E
700[ 2.664635] ata3.00: Trusted Computing capability qword not valid!
701[ 2.665074] ata3.00: supports DRM functions and may not be fully accessible
702[ 2.665868] ata3.00: Trusted Computing capability qword not valid!
703[ 2.665884] ata3.00: configured for UDMA/133
704[ 2.666281] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5
705[ 2.748365] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
706[ 2.784382] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci
707[ 2.864788] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
708[ 2.864791] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
709[ 2.864794] usb 1-1.6: Product: Integrated Camera
710[ 2.864796] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
711[ 2.884802] Console: switching to colour frame buffer device 240x67
712[ 2.899088] usb 4-1.5.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10
713[ 2.899092] usb 4-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
714[ 2.899094] usb 4-1.5.1: Product: USB Receiver
715[ 2.899096] usb 4-1.5.1: Manufacturer: Logitech
716[ 2.923166] hidraw: raw HID events driver (C) Jiri Kosina
717[ 2.924960] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
718[ 2.949019] usbcore: registered new interface driver usbhid
719[ 2.950530] usbhid: USB HID core driver
720[ 2.954941] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:046D:C52B.0001/input/input9
721[ 2.979845] ata5: SATA link down (SStatus 0 SControl 300)
722[ 2.982979] usb 4-1.5.3: new high-speed USB device number 5 using ehci-pci
723[ 2.998327] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
724[ 2.998333] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
725[ 2.998334] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
726[ 2.998335] sd 2:0:0:0: [sdc] 4096-byte physical blocks
727[ 2.998345] sd 2:0:0:0: [sdc] Write Protect is off
728[ 2.998346] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
729[ 2.998360] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
730[ 2.999996] sd 1:0:0:0: [sdb] 4096-byte physical blocks
731[ 3.000023] sd 1:0:0:0: [sdb] Write Protect is off
732[ 3.002099] sd 0:0:0:0: [sda] Write Protect is off
733[ 3.004094] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
734[ 3.006018] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
735[ 3.007962] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
736[ 3.009989] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
737[ 3.018730] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
738[ 3.019017] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input0
739[ 3.020803] sdc: sdc1 sdc2 sdc3
740[ 3.022316] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input10
741[ 3.023852] sd 2:0:0:0: [sdc] Attached SCSI disk
742[ 3.024997] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input11
743[ 3.034618] sdb: sdb1
744[ 3.036817] sd 1:0:0:0: [sdb] Attached SCSI disk
745[ 3.041746] sda: sda1 sda2 < sda5 >
746[ 3.043738] sd 0:0:0:0: [sda] Attached SCSI disk
747[ 3.084333] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input12
748[ 3.085881] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input1
749[ 3.087618] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
750[ 3.121445] usb 4-1.5.3: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
751[ 3.125047] usb 4-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
752[ 3.128173] hub 4-1.5.3:1.0: USB hub found
753[ 3.131175] hub 4-1.5.3:1.0: 3 ports detected
754[ 3.223284] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
755[ 3.228791] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
756[ 3.240285] usb 4-1.5.6: new high-speed USB device number 6 using ehci-pci
757[ 3.351193] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input14
758[ 3.358031] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.0-1.5.1/input2:1
759[ 3.380563] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
760[ 3.383279] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
761[ 3.386244] hub 4-1.5.6:1.0: USB hub found
762[ 3.389175] hub 4-1.5.6:1.0: 4 ports detected
763[ 3.431942] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input18
764[ 3.435538] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.5.1/input2:1
765[ 3.496325] usb 4-1.5.3.3: new full-speed USB device number 7 using ehci-pci
766[ 3.556284] raid6: sse2x4 gen() 11891 MB/s
767[ 3.580283] usb 4-1.5.3.3: device descriptor read/64, error -32
768[ 3.624282] raid6: sse2x4 xor() 8125 MB/s
769[ 3.692284] raid6: sse2x2 gen() 13031 MB/s
770[ 3.760281] raid6: sse2x2 xor() 8780 MB/s
771[ 3.828284] raid6: sse2x1 gen() 10931 MB/s
772[ 3.855509] usb 4-1.5.3.3: New USB device found, idVendor=056d, idProduct=0002, bcdDevice=75.30
773[ 3.857133] usb 4-1.5.3.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
774[ 3.858739] usb 4-1.5.3.3: Product: EIZO USB HID Monitor
775[ 3.860336] usb 4-1.5.3.3: Manufacturer: EIZO
776[ 3.896285] raid6: sse2x1 xor() 7533 MB/s
777[ 3.896291] usb 4-1.5.2: new full-speed USB device number 8 using ehci-pci
778[ 3.897865] raid6: using algorithm sse2x2 gen() 13031 MB/s
779[ 3.897866] raid6: .... xor() 8780 MB/s, rmw enabled
780[ 3.902559] raid6: using ssse3x2 recovery algorithm
781[ 3.904738] xor: automatically using best checksumming function avx
782[ 3.908113] async_tx: api initialized (async)
783[ 4.008711] usb 4-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03
784[ 4.012580] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
785[ 4.019978] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:04B4:4042.0005/input/input19
786[ 4.080883] hid-generic 0003:04B4:4042.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0
787[ 4.086819] usb 4-1.5.6.1: new high-speed USB device number 9 using ehci-pci
788[ 4.095619] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input20
789[ 4.098390] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input21
790[ 4.104464] device-mapper: uevent: version 1.0.3
791[ 4.106349] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
792[ 4.160522] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input22
793[ 4.168706] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input23
794[ 4.172701] hid-generic 0003:056D:0002.0007: hiddev1,hidraw3: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.0-1.5.3.3/input0
795[ 4.175683] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input24
796[ 4.180266] hid-generic 0003:04B4:4042.0006: input,hiddev2,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1
797[ 4.205267] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
798[ 4.208581] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
799[ 4.212145] hub 4-1.5.6.1:1.0: USB hub found
800[ 4.212327] hub 4-1.5.6.1:1.0: 4 ports detected
801[ 4.500377] usb 4-1.5.6.1.2: new full-speed USB device number 10 using ehci-pci
802[ 4.619455] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02
803[ 4.623648] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
804[ 4.626528] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller
805[ 4.629752] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc.
806[ 4.712390] usb 4-1.5.6.1.3: new full-speed USB device number 11 using ehci-pci
807[ 4.826732] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00
808[ 4.830823] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
809[ 4.834850] usb 4-1.5.6.1.3: Product: USB-Serial Controller D
810[ 4.836474] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc.
811[ 10.288919] PM: Image not found (code -22)
812[ 10.293676] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
813[ 10.293678] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
814[ 10.293681] PM: Marking nosave pages: [mem 0x7ff27000-0xffffffff]
815[ 10.295262] PM: Basic memory bitmaps created
816[ 10.295965] PM: Basic memory bitmaps freed
817[ 10.296770] video LNXVIDEO:00: Restoring backlight state
818[ 10.412942] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
819[ 10.487112] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
820[ 10.674663] systemd[1]: Inserted module 'autofs4'
821[ 10.703186] systemd[1]: systemd 244-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
822[ 10.728540] systemd[1]: Detected architecture x86-64.
823[ 10.766301] systemd[1]: Set hostname to <TP-T430s>.
824[ 10.886088] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
825[ 10.925660] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly.
826[ 10.929930] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
827[ 10.954851] systemd[1]: /lib/systemd/system/fancontrol.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
828[ 10.958362] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
829[ 10.967498] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
830[ 10.993982] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
831[ 11.004133] systemd[1]: Created slice system-getty.slice.
832[ 11.006287] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
833[ 11.014888] systemd[1]: Created slice system-systemd\x2dfsck.slice.
834[ 11.021355] systemd[1]: Created slice system-tor.slice.
835[ 11.025491] systemd[1]: Created slice User and Session Slice.
836[ 11.029598] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
837[ 11.034674] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
838[ 11.040695] systemd[1]: Reached target User and Group Name Lookups.
839[ 11.042489] systemd[1]: Reached target Remote File Systems.
840[ 11.046494] systemd[1]: Reached target Slices.
841[ 11.049695] systemd[1]: Listening on Device-mapper event daemon FIFOs.
842[ 11.053939] systemd[1]: Listening on LVM2 poll daemon socket.
843[ 11.058456] systemd[1]: Listening on Syslog Socket.
844[ 11.062331] systemd[1]: Listening on fsck to fsckd communication Socket.
845[ 11.066127] systemd[1]: Listening on initctl Compatibility Named Pipe.
846[ 11.070054] systemd[1]: Listening on Journal Audit Socket.
847[ 11.073811] systemd[1]: Listening on Journal Socket (/dev/log).
848[ 11.077646] systemd[1]: Listening on Journal Socket.
849[ 11.081452] systemd[1]: Listening on udev Control Socket.
850[ 11.085195] systemd[1]: Listening on udev Kernel Socket.
851[ 11.089719] systemd[1]: Mounting Huge Pages File System...
852[ 11.093635] systemd[1]: Mounting POSIX Message Queue File System...
853[ 11.097554] systemd[1]: Mounting Kernel Debug File System...
854[ 11.101470] systemd[1]: Starting Availability of block devices...
855[ 11.105476] systemd[1]: Starting Set the console keyboard layout...
856[ 11.109517] systemd[1]: Starting Create list of static device nodes for the current kernel...
857[ 11.113708] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
858[ 11.118859] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
859[ 11.118891] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
860[ 11.120187] systemd[1]: Starting Journal Service...
861[ 11.128136] systemd[1]: Starting Load Kernel Modules...
862[ 11.131993] systemd[1]: Starting Remount Root and Kernel File Systems...
863[ 11.137639] systemd[1]: Starting udev Coldplug all Devices...
864[ 11.142912] systemd[1]: Mounted Huge Pages File System.
865[ 11.146025] systemd[1]: Mounted POSIX Message Queue File System.
866[ 11.150997] systemd[1]: Mounted Kernel Debug File System.
867[ 11.152843] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
868[ 11.157866] systemd[1]: Started Availability of block devices.
869[ 11.160965] systemd[1]: Started Set the console keyboard layout.
870[ 11.166425] systemd[1]: Started Create list of static device nodes for the current kernel.
871[ 11.171614] systemd[1]: Started Remount Root and Kernel File Systems.
872[ 11.175664] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
873[ 11.176862] systemd[1]: Starting Load/Save Random Seed...
874[ 11.181075] systemd[1]: Starting Create System Users...
875[ 11.201749] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
876[ 11.210624] systemd[1]: Started Load/Save Random Seed.
877[ 11.218103] systemd[1]: Started Create System Users.
878[ 11.220493] systemd[1]: Starting Create Static Device Nodes in /dev...
879[ 11.248403] systemd[1]: Started Create Static Device Nodes in /dev.
880[ 11.250025] systemd[1]: Reached target Local File Systems (Pre).
881[ 11.257730] systemd[1]: Mounting Mount unit for core18, revision 1279...
882[ 11.261999] systemd[1]: Mounting Mount unit for core18, revision 1288...
883[ 11.265092] systemd[1]: Mounting Mount unit for sdlpop, revision 211...
884[ 11.271902] systemd[1]: Mounting Mount unit for snapd, revision 5643...
885[ 11.276234] systemd[1]: Mounting Mount unit for snapd, revision 5754...
886[ 11.279120] systemd[1]: Starting udev Kernel Device Manager...
887[ 11.283184] systemd[1]: Started udev Coldplug all Devices.
888[ 11.289008] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
889[ 11.296335] systemd[1]: Started Helper to synchronize boot up for ifupdown.
890[ 11.328514] loop: module loaded
891[ 11.341102] lp: driver loaded but no devices found
892[ 11.346410] ppdev: user-space parallel port driver
893[ 11.356474] systemd[1]: Started Load Kernel Modules.
894[ 11.358918] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
895[ 11.361156] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
896[ 11.362444] systemd[1]: Starting Apply Kernel Variables...
897[ 11.366518] squashfs: version 4.0 (2009/01/31) Phillip Lougher
898[ 11.382196] systemd[1]: Started Apply Kernel Variables.
899[ 11.401062] systemd[1]: Mounted Mount unit for core18, revision 1288.
900[ 11.431318] systemd[1]: Started udev Kernel Device Manager.
901[ 11.434694] systemd[1]: Starting Show Plymouth Boot Screen...
902[ 11.441185] systemd[1]: Mounted Mount unit for core18, revision 1279.
903[ 11.445186] systemd[1]: Mounted Mount unit for snapd, revision 5754.
904[ 11.447608] systemd[1]: Mounted Mount unit for sdlpop, revision 211.
905[ 11.459117] systemd[1]: Mounted Mount unit for snapd, revision 5643.
906[ 11.468271] systemd[1]: plymouth-start.service: Succeeded.
907[ 11.470852] systemd[1]: Started Show Plymouth Boot Screen.
908[ 11.473199] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
909[ 11.473316] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
910[ 11.629996] systemd[1]: Created slice system-systemd\x2dbacklight.slice.
911[ 11.633027] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0...
912[ 11.636572] systemd[1]: Started Journal Service.
913[ 11.647023] ACPI: AC Adapter [AC] (on-line)
914[ 11.651555] systemd-journald[499]: Received client request to flush runtime journal.
915[ 11.729868] Non-volatile memory driver v1.3
916[ 11.798663] thinkpad_acpi: ThinkPad ACPI Extras v0.26
917[ 11.800758] thinkpad_acpi: http://ibm-acpi.sf.net/
918[ 11.802824] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-659-gef4fe3e37c, EC G7HT39WW-3.22
919[ 11.804893] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU
920[ 11.804941] sd 0:0:0:0: Attached scsi generic sg0 type 0
921[ 11.804949] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
922[ 11.809776] thinkpad_acpi: radio switch found; radios are enabled
923[ 11.812718] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
924[ 11.814802] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
925[ 11.816940] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
926[ 11.822507] sd 1:0:0:0: Attached scsi generic sg1 type 0
927[ 11.824542] sd 2:0:0:0: Attached scsi generic sg2 type 0
928[ 11.824598] input: PC Speaker as /devices/platform/pcspkr/input/input26
929[ 11.828788] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
930[ 11.831324] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
931[ 11.833365] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
932[ 11.835343] RAPL PMU: hw unit of domain package 2^-16 Joules
933[ 11.837306] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
934[ 11.842616] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
935[ 11.848207] iTCO_vendor_support: vendor-support=0
936[ 11.863642] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
937[ 11.865929] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
938[ 11.870606] thinkpad_acpi: battery 1 registered (start 0, stop 100)
939[ 11.870611] battery: new extension: ThinkPad Battery Extension
940[ 11.875744] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input25
941[ 11.897126] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
942[ 11.899346] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
943[ 11.907418] wl: loading out-of-tree module taints kernel.
944[ 11.909792] wl: module license 'MIXED/Proprietary' taints kernel.
945[ 11.910685] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
946[ 11.911738] Disabling lock debugging due to kernel taint
947[ 11.917830] wl: module verification failed: signature and/or required key missing - tainting kernel
948[ 11.940537] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
949
950[ 11.965581] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
951[ 12.001053] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
952[ 12.003123] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
953[ 12.005182] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
954[ 12.007211] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
955[ 12.009253] snd_hda_codec_realtek hdaudioC0D0: inputs:
956[ 12.012816] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
957[ 12.016222] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
958[ 12.018247] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
959[ 12.046470] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
960[ 12.048562] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
961[ 12.050594] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29
962[ 12.052715] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
963[ 12.054734] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
964[ 12.056793] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
965[ 12.058877] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
966[ 12.061314] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34
967[ 12.148340] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS
968[ 12.256159] wl 0000:01:00.0 wlp1s0: renamed from wlan0
969[ 12.329223] intel_rapl_common: Found RAPL domain package
970[ 12.331168] intel_rapl_common: Found RAPL domain core
971[ 12.333093] intel_rapl_common: Found RAPL domain uncore
972[ 12.554857] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
973[ 12.561539] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
974[ 12.563350] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
975[ 12.743763] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
976[ 12.808801] audit: type=1400 audit(1577921560.975:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1266 comm="apparmor_parser"
977[ 12.808804] audit: type=1400 audit(1577921560.975:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1266 comm="apparmor_parser"
978[ 12.808806] audit: type=1400 audit(1577921560.975:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1266 comm="apparmor_parser"
979[ 12.810731] audit: type=1400 audit(1577921560.975:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1265 comm="apparmor_parser"
980[ 12.816567] audit: type=1400 audit(1577921560.975:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1267 comm="apparmor_parser"
981[ 12.816895] audit: type=1400 audit(1577921560.987:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1268 comm="apparmor_parser"
982[ 12.821727] audit: type=1400 audit(1577921560.987:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1273 comm="apparmor_parser"
983[ 12.824846] audit: type=1400 audit(1577921560.987:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1270 comm="apparmor_parser"
984[ 12.824850] audit: type=1400 audit(1577921560.987:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1270 comm="apparmor_parser"
985[ 12.824852] audit: type=1400 audit(1577921560.987:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1271 comm="apparmor_parser"
986[ 12.929031] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input35
987[ 13.228016] Process accounting resumed
988[ 14.104596] vboxdrv: Found 4 processor cores
989[ 14.137263] vboxdrv: TSC mode is Invariant, tentative frequency 2893423549 Hz
990[ 14.138582] vboxdrv: Successfully loaded version 6.1.0_Debian (interface 0x002d0001)
991[ 14.299168] mc: Linux media interface: v0.10
992[ 14.326492] videodev: Linux video capture interface: v2.00
993[ 14.352074] VBoxNetFlt: Successfully started.
994[ 14.359805] VBoxNetAdp: Successfully started.
995[ 14.444975] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
996[ 14.456454] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
997[ 14.458223] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
998[ 14.459651] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
999[ 14.462628] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
1000[ 14.464266] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input36
1001[ 14.466484] usbcore: registered new interface driver uvcvideo
1002[ 14.467934] USB Video Class driver (1.1.1)
1003[ 14.646267] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
1004[ 14.739812] Bluetooth: Core ver 2.22
1005[ 14.741426] NET: Registered protocol family 31
1006[ 14.742816] Bluetooth: HCI device and connection manager initialized
1007[ 14.744936] Bluetooth: HCI socket layer initialized
1008[ 14.746347] Bluetooth: L2CAP socket layer initialized
1009[ 14.747781] Bluetooth: SCO socket layer initialized
1010[ 14.776152] usbcore: registered new interface driver btusb
1011[ 14.864129] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
1012[ 14.865292] Bluetooth: BNEP filters: protocol multicast
1013[ 14.867104] Bluetooth: BNEP socket layer initialized
1014[ 14.890425] Bluetooth: hci0: BCM: chip id 63
1015[ 14.893425] Bluetooth: hci0: BCM: features 0x07
1016[ 14.910433] Bluetooth: hci0: TP-T430s
1017[ 14.912428] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
1018[ 14.921931] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd
1019[ 15.810424] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
1020[ 15.826426] Bluetooth: hci0: Broadcom Bluetooth Device
1021[ 16.040305] Bluetooth: RFCOMM TTY layer initialized
1022[ 16.040315] Bluetooth: RFCOMM socket layer initialized
1023[ 16.040321] Bluetooth: RFCOMM ver 1.11
1024[ 16.675199] usblp 4-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
1025[ 16.676931] usbcore: registered new interface driver usblp
1026[ 16.699296] usbcore: registered new interface driver usbserial_generic
1027[ 16.700548] usbserial: USB Serial support registered for generic
1028[ 16.706055] usbcore: registered new interface driver pl2303
1029[ 16.707260] usbserial: USB Serial support registered for pl2303
1030[ 16.708811] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected
1031[ 16.714689] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0
1032[ 18.932033] rfkill: input handler disabled
1033[ 20.762114] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
1034[ 20.762166] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
1035[ 21.068504] kauditd_printk_skb: 32 callbacks suppressed
1036[ 21.068506] audit: type=1400 audit(1577921569.235:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2980 comm="apparmor_parser"
1037[ 21.218838] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
1038[ 21.221712] Bridge firewalling registered
1039[ 21.462067] Initializing XFRM netlink socket
1040[ 24.940227] rfkill: input handler enabled
1041[ 27.154057] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
1042[ 28.736492] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
1043[ 31.037176] rfkill: input handler disabled
1044[ 33.002094] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
1045[ 35.147494] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected.