lenovo/t430s/4.11-646-g99b075aa94/2019-12-31T15_24_06Z/coreboot_console.txt

*** Pre-CBMEM romstage console overflowed, log truncated! ***
y: 800 MHz
Selected CAS latency   : 9T
PLL busy... done in 50 us
MCU frequency is set at : 800 MHz
Done dimm mapping
Update PCI-E configuration space:
PCI(0, 0, 0)[a0] = 0
PCI(0, 0, 0)[a4] = 4
PCI(0, 0, 0)[bc] = 82a00000
PCI(0, 0, 0)[a8] = 7b600000
PCI(0, 0, 0)[ac] = 4
PCI(0, 0, 0)[b8] = 80000000
PCI(0, 0, 0)[b0] = 80a00000
PCI(0, 0, 0)[b4] = 80800000
PCI(0, 0, 0)[7c] = 7f
PCI(0, 0, 0)[70] = fe000000
PCI(0, 0, 0)[74] = 3
PCI(0, 0, 0)[78] = fe000c00
Done memory map
Done io registers
t123: 1767, 6000, 7620
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : NO
ME: Manufacturing Mode      : NO
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Recovery
ME: Current Operation State : Bring up
ME: Current Operation Mode  : Normal
ME: Error Code              : No Error
ME: Progress Phase          : BUP Phase
ME: Power Management Event  : Clean Moff->Mx wake
ME: Progress Phase State    : Waiting for DID BIOS message
ME: FWS2: 0x101f017a
ME:  Bist in progress: 0x0
ME:  ICC Status      : 0x1
ME:  Invoke MEBx     : 0x1
ME:  CPU replaced    : 0x1
ME:  MBP ready       : 0x1
ME:  MFS failure     : 0x1
ME:  Warm reset req  : 0x0
ME:  CPU repl valid  : 0x1
ME:  (Reserved)      : 0x0
ME:  FW update req   : 0x0
ME:  (Reserved)      : 0x0
ME:  Current state   : 0x1f
ME:  Current PM event: 0x0
ME:  Progress code   : 0x1
Full training required
PASSED! Tell ME that DRAM is ready
Timestamp - waiting for ME acknowledgement of raminit: 252384314
Timestamp - finished waiting for ME response: 255815226
ME: FWS2: 0x102c017a
ME:  Bist in progress: 0x0
ME:  ICC Status      : 0x1
ME:  Invoke MEBx     : 0x1
ME:  CPU replaced    : 0x1
ME:  MBP ready       : 0x1
ME:  MFS failure     : 0x1
ME:  Warm reset req  : 0x0
ME:  CPU repl valid  : 0x1
ME:  (Reserved)      : 0x0
ME:  FW update req   : 0x0
ME:  (Reserved)      : 0x0
ME:  Current state   : 0x2c
ME:  Current PM event: 0x0
ME:  Progress code   : 0x1
ME: Requested BIOS Action: Continue to boot
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : NO
ME: Manufacturing Mode      : NO
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Recovery
ME: Current Operation State : Bring up
ME: Current Operation Mode  : Normal
ME: Error Code              : No Error
ME: Progress Phase          : BUP Phase
ME: Power Management Event  : Clean Moff->Mx wake
ME: Progress Phase State    : 0x2c
memcfg DDR3 ref clock 133 MHz
memcfg DDR3 clock 1596 MHz
memcfg channel assignment: A: 0, B  1, C  2
memcfg channel[0] config (00620020):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 8192 MB width x8 dual rank, selected
   DIMMB 0 MB width x8 single rank
memcfg channel[1] config (00620020):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 8192 MB width x8 dual rank, selected
   DIMMB 0 MB width x8 single rank
CBMEM:
IMD: root @ 0x7ffff000 254 entries.
IMD: root @ 0x7fffec00 62 entries.
External stage cache:
IMD: root @ 0x803ff000 254 entries.
IMD: root @ 0x803fec00 62 entries.
Timestamp - start of bootblock: 196165753
Timestamp - end of bootblock: 197491740
Timestamp - starting to load romstage: 198272670
Timestamp - finished loading romstage: 198293521
Timestamp - start of romstage: 198552154
Timestamp - before ram initialization: 205071682
Timestamp - waiting for ME acknowledgement of raminit: 245877399
Timestamp - finished waiting for ME response: 249308311
CBMEM entry for DIMM info: 0x7fffe960
Timestamp - after ram initialization: 261254843
POST: 0x3b
POST: 0x3c
POST: 0x3d
POST: 0x3f
SMM Memory Map
SMRAM       : 0x80000000 0x800000
 Subregion 0: 0x80000000 0x300000
 Subregion 1: 0x80300000 0x100000
 Subregion 2: 0x80400000 0x400000
MTRR Range: Start=7f800000 End=80000000 (Size 800000)
MTRR Range: Start=80000000 End=80800000 (Size 800000)
MTRR Range: Start=ff000000 End=0 (Size 1000000)
FMAP: area COREBOOT found @ c10200 (4128256 bytes)
CBFS @ c10200 size 3efe00
CBFS: 'COREBOOT Locator' located CBFS at [c10200:1000000)
CBFS: Locating 'fallback/postcar'
CBFS: Checking offset 0
CBFS: File @ offset 0 size 20
CBFS:  Unmatched 'cbfs master header' at 0
CBFS: Checking offset 80
CBFS: File @ offset 80 size 1468c
CBFS:  Unmatched 'fallback/romstage' at 80
CBFS: Checking offset 14780
CBFS: File @ offset 14780 size 6800
CBFS:  Unmatched 'cpu_microcode_blob.bin' at 14780
CBFS: Checking offset 1b000
CBFS: File @ offset 1b000 size 17482
CBFS:  Unmatched 'fallback/ramstage' at 1b000
CBFS: Checking offset 324c0
CBFS: File @ offset 324c0 size 557
CBFS:  Unmatched 'config' at 324c0
CBFS: Checking offset 32a80
CBFS: File @ offset 32a80 size 2a2
CBFS:  Unmatched 'revision' at 32a80
CBFS: Checking offset 32d80
CBFS: File @ offset 32d80 size bd3a
CBFS:  Unmatched 'bootsplash.jpg' at 32d80
CBFS: Checking offset 3eb00
CBFS: File @ offset 3eb00 size 100
CBFS:  Unmatched 'cmos.default' at 3eb00
CBFS: Checking offset 3ec40
CBFS: File @ offset 3ec40 size 581
CBFS:  Unmatched 'vbt.bin' at 3ec40
CBFS: Checking offset 3f200
CBFS: File @ offset 3f200 size 73c
CBFS:  Unmatched 'cmos_layout.bin' at 3f200
CBFS: Checking offset 3f980
CBFS: File @ offset 3f980 size 10000
CBFS:  Unmatched 'pci8086,0166.rom' at 3f980
CBFS: Checking offset 4fa00
CBFS: File @ offset 4fa00 size 5b44
CBFS: Found @ offset 4fa00 size 5b44
Decompressing stage fallback/postcar @ 0x7ffd1fc0 (39312 bytes)
Loading module at 0x7ffd2000 with entry 0x7ffd2000. filesize: 0x5650 memsize: 0x9950
Processing 294 relocs. Offset value of 0x7dfd2000
Timestamp - end of romstage: 278637173
Accumulated console time in romstage 2 ms


coreboot-4.11-646-g99b075aa94 Tue Dec 31 15:24:06 UTC 2019 postcar starting (log level: 7)...
FMAP: area COREBOOT found @ c10200 (4128256 bytes)
CBFS: 'COREBOOT Locator' located CBFS at [c10200:1000000)
CBFS: Locating 'fallback/ramstage'
CBFS: Found @ offset 1b000 size 17482
Decompressing stage fallback/ramstage @ 0x7ff8afc0 (285176 bytes)
Loading module at 0x7ff8b000 with entry 0x7ff8b000. filesize: 0x30d78 memsize: 0x459b8
Processing 3547 relocs. Offset value of 0x7f18b000
Accumulated console time in postcar 0 ms


coreboot-4.11-646-g99b075aa94 Tue Dec 31 15:24:06 UTC 2019 ramstage starting (log level: 7)...
POST: 0x39
POST: 0x80
Normal boot.
POST: 0x70
BS: BS_PRE_DEVICE times (ms): entry 0 run 0 exit 0
POST: 0x71
BS: BS_DEV_INIT_CHIPS times (ms): entry 0 run 0 exit 0
POST: 0x72
Enumerating buses...
CPU_CLUSTER: 0 enabled
DOMAIN: 0000 enabled
PCI: pci_scan_bus for bus 00
POST: 0x24
PCI: 00:00.0 [8086/0154] enabled
PCI: Static device PCI: 00:01.0 not found, disabling it.
PCI: 00:02.0 [8086/0166] enabled
PCI: 00:04.0 [8086/0153] enabled
PCI: 00:14.0 [8086/1e31] enabled
PCI: 00:16.0: Disabling device
PCI: 00:16.0 [8086/1e3a] disabled
PCI: 00:16.1: Disabling device
PCI: 00:16.2: Disabling device
PCI: 00:16.3: Disabling device
PCI: 00:19.0 [8086/1502] enabled
PCI: 00:1a.0 [8086/1e2d] enabled
PCI: 00:1b.0 [8086/1e20] enabled
PCH: PCIe Root Port coalescing is enabled
PCI: 00:1c.0: Disabling device
PCI: 00:1c.0: check set enabled
PCI: 00:1c.0 [8086/1e10] disabled
PCH: Remap PCIe function 1 to 0
PCI: 00:1c.1 [8086/1e12] enabled
PCH: Remap PCIe function 2 to 0
PCI: 00:1c.2 [8086/1e14] enabled
PCI: 00:1c.3: Disabling device
PCI: 00:1c.3 [8086/1e16] disabled
PCH: Remap PCIe function 4 to 0
PCI: 00:1c.4 [8086/1e18] enabled
PCI: 00:1c.5: Disabling device
PCI: 00:1c.6: Disabling device
PCI: 00:1c.7: Disabling device
PCH: PCIe map 1c.0 -> 1c.4
PCH: PCIe map 1c.1 -> 1c.0
PCH: PCIe map 1c.2 -> 1c.1
PCH: PCIe map 1c.4 -> 1c.2
PCI: 00:1d.0 [8086/1e26] enabled
PCI: 00:1e.0: Disabling device
PCI: 00:1e.0 [8086/2448] disabled
PCI: 00:1f.0 [8086/1e55] enabled
PCI: 00:1f.2 [8086/1e01] enabled
PCI: 00:1f.3 [8086/1e22] enabled
PCI: 00:1f.5: Disabling device
PCI: 00:1f.5 [8086/1e09] disabled No operations
PCI: 00:1f.6 [8086/1e24] enabled
POST: 0x25
PCI: Leftover static devices:
PCI: 00:01.0
PCI: 00:16.1
PCI: 00:16.2
PCI: 00:16.3
PCI: 00:1c.5
PCI: 00:1c.6
PCI: 00:1c.7
PCI: Check your devicetree.cb.
PCI: pci_scan_bus for bus 01
POST: 0x24
PCI: 01:00.0 [14e4/43a0] enabled
POST: 0x25
POST: 0x55
Enabling Common Clock Configuration
ASPM: Enabled L0s and L1
PCIe: Max_Payload_Size adjusted to 128
scan_bus: scanning of bus PCI: 00:1c.0 took 259 usecs
PCI: pci_scan_bus for bus 02
POST: 0x24
PCI: 02:00.0 [1180/e823] enabled
POST: 0x25
POST: 0x55
Enabling Common Clock Configuration
ASPM: Enabled L0s and L1
PCIe: Max_Payload_Size adjusted to 128
Failed to enable LTR for dev = PCI: 02:00.0
scan_bus: scanning of bus PCI: 00:1c.1 took 259 usecs
PCI: pci_scan_bus for bus 03
POST: 0x24
POST: 0x25
POST: 0x55
scan_bus: scanning of bus PCI: 00:1c.2 took 53 usecs
PMH7: ID 05 Revision 12
PNP: 00ff.1 enabled
PNP: 0c31.0 enabled
EC Firmware ID G7HT39WW-3.22, Version 5.01B
H8: BDC detection not implemented. Assuming BDC installed
H8: WWAN detection not implemented. Assuming WWAN installed
PNP: 00ff.2 enabled
scan_bus: scanning of bus PCI: 00:1f.0 took 4842 usecs
bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled
scan_bus: scanning of bus PCI: 00:1f.3 took 18 usecs
POST: 0x55
scan_bus: scanning of bus DOMAIN: 0000 took 5845 usecs
scan_bus: scanning of bus Root Device took 5850 usecs
done
FMAP: area RW_MRC_CACHE found @ c00000 (65536 bytes)
MRC: No data in cbmem for 'RW_MRC_CACHE'.
BS: BS_DEV_ENUMERATE times (ms): entry 0 run 6 exit 0
POST: 0x73
found VGA at PCI: 00:02.0
Setting up VGA for PCI: 00:02.0
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Allocating resources...
Reading resources...
Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
PNP: 00ff.1 missing read_resources
PNP: 00ff.2 missing read_resources
Done reading resources.
skipping PNP: 00ff.2@60 fixed resource, size=0!
skipping PNP: 00ff.2@62 fixed resource, size=0!
skipping PNP: 00ff.2@64 fixed resource, size=0!
skipping PNP: 00ff.2@66 fixed resource, size=0!
Setting resources...
TOUUD 0x47b600000 TOLUD 0x82a00000 TOM 0x400000000
MEBASE 0x3fe000000
IGD decoded, subtracting 32M UMA and 2M GTT
TSEG base 0x80000000 size 8M
Available memory below 4GB: 2048M
Available memory above 4GB: 14262M
PCI: 00:02.0 10 <- [0x00e2400000 - 0x00e27fffff] size 0x00400000 gran 0x16 mem64
PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64
PCI: 00:02.0 20 <- [0x0000004000 - 0x000000403f] size 0x00000040 gran 0x06 io
PCI: 00:04.0 10 <- [0x00e2b30000 - 0x00e2b37fff] size 0x00008000 gran 0x0f mem64
PCI: 00:14.0 10 <- [0x00e2b20000 - 0x00e2b2ffff] size 0x00010000 gran 0x10 mem64
PCI: 00:19.0 10 <- [0x00e2b00000 - 0x00e2b1ffff] size 0x00020000 gran 0x11 mem
PCI: 00:19.0 14 <- [0x00e2b3c000 - 0x00e2b3cfff] size 0x00001000 gran 0x0c mem
PCI: 00:19.0 18 <- [0x0000004040 - 0x000000405f] size 0x00000020 gran 0x05 io
PCI: 00:1a.0 10 <- [0x00e2b3f000 - 0x00e2b3f3ff] size 0x00000400 gran 0x0a mem
PCI: 00:1b.0 10 <- [0x00e2b38000 - 0x00e2b3bfff] size 0x00004000 gran 0x0e mem64
PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io
PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem
PCI: 00:1c.0 20 <- [0x00e2800000 - 0x00e2afffff] size 0x00300000 gran 0x14 bus 01 mem
PCI: 01:00.0 10 <- [0x00e2a00000 - 0x00e2a07fff] size 0x00008000 gran 0x0f mem64
PCI: 01:00.0 18 <- [0x00e2800000 - 0x00e29fffff] size 0x00200000 gran 0x15 mem64
PCI: 00:1c.1 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 02 io
PCI: 00:1c.1 24 <- [0x00e0c00000 - 0x00e13fffff] size 0x00800000 gran 0x14 bus 02 prefmem
PCI: 00:1c.1 20 <- [0x00e0000000 - 0x00e08fffff] size 0x00900000 gran 0x14 bus 02 mem
PCI: 02:00.0 10 <- [0x00e0800000 - 0x00e08000ff] size 0x00000100 gran 0x08 mem
NONE missing set_resources
PCI: 00:1c.2 1c <- [0x0000003000 - 0x0000003fff] size 0x00001000 gran 0x0c bus 03 io
PCI: 00:1c.2 24 <- [0x00e1400000 - 0x00e1bfffff] size 0x00800000 gran 0x14 bus 03 prefmem
PCI: 00:1c.2 20 <- [0x00e1c00000 - 0x00e23fffff] size 0x00800000 gran 0x14 bus 03 mem
NONE missing set_resources
PCI: 00:1d.0 10 <- [0x00e2b40000 - 0x00e2b403ff] size 0x00000400 gran 0x0a mem
PNP: 00ff.1 missing set_resources
PNP: 00ff.2 missing set_resources
PCI: 00:1f.2 10 <- [0x0000004080 - 0x0000004087] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 14 <- [0x0000004090 - 0x0000004093] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 18 <- [0x0000004088 - 0x000000408f] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 1c <- [0x0000004094 - 0x0000004097] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 20 <- [0x0000004060 - 0x000000407f] size 0x00000020 gran 0x05 io
PCI: 00:1f.2 24 <- [0x00e2b3e000 - 0x00e2b3e7ff] size 0x00000800 gran 0x0b mem
PCI: 00:1f.3 10 <- [0x00e2b41000 - 0x00e2b410ff] size 0x00000100 gran 0x08 mem64
PCI: 00:1f.6 10 <- [0x00e2b3d000 - 0x00e2b3dfff] size 0x00001000 gran 0x0c mem64
Done setting resources.
Done allocating resources.
BS: BS_DEV_RESOURCES times (ms): entry 0 run 1 exit 0
POST: 0x74
Enabling resources...
PCI: 00:00.0 subsystem <- 8086/0154
PCI: 00:00.0 cmd <- 06
PCI: 00:02.0 subsystem <- 8086/0166
PCI: 00:02.0 cmd <- 03
PCI: 00:04.0 cmd <- 02
PCI: 00:14.0 subsystem <- 8086/1e31
PCI: 00:14.0 cmd <- 102
PCI: 00:19.0 subsystem <- 17aa/21f3
PCI: 00:19.0 cmd <- 103
PCI: 00:1a.0 subsystem <- 8086/1e2d
PCI: 00:1a.0 cmd <- 102
PCI: 00:1b.0 subsystem <- 8086/1e20
PCI: 00:1b.0 cmd <- 102
PCI: 00:1c.0 bridge ctrl <- 0013
PCI: 00:1c.0 subsystem <- 8086/1e12
PCI: 00:1c.0 cmd <- 106
PCI: 00:1c.1 bridge ctrl <- 0013
PCI: 00:1c.1 subsystem <- 8086/1e14
PCI: 00:1c.1 cmd <- 107
PCI: 00:1c.2 bridge ctrl <- 0013
PCI: 00:1c.2 subsystem <- 8086/1e18
PCI: 00:1c.2 cmd <- 107
PCI: 00:1d.0 subsystem <- 8086/1e26
PCI: 00:1d.0 cmd <- 102
PCI: 00:1f.0 subsystem <- 8086/1e55
PCI: 00:1f.0 cmd <- 107
PCI: 00:1f.2 subsystem <- 8086/1e03
PCI: 00:1f.2 cmd <- 03
PCI: 00:1f.3 subsystem <- 8086/1e22
PCI: 00:1f.3 cmd <- 103
PCI: 00:1f.6 subsystem <- 8086/1e24
PCI: 00:1f.6 cmd <- 02
PCI: 01:00.0 cmd <- 02
PCI: 02:00.0 cmd <- 06
done.
BS: BS_DEV_ENABLE times (ms): entry 0 run 0 exit 0
Found TPM ST33ZP24 by ST Microelectronics
TPM: Startup
TPM: command 0x99 returned 0x0
TPM: Asserting physical presence
TPM: command 0x4000000a returned 0x0
TPM: command 0x65 returned 0x801
TPM: Continue self test
TPM: command 0x53 returned 0x0
TPM: command 0x65 returned 0x0
TPM: flags disable=0, deactivated=0, nvlocked=1
TPM: setup succeeded
POST: 0x75
Initializing devices...
Root Device init ...
Root Device init finished in 1 usecs
POST: 0x75
CPU_CLUSTER: 0 init ...
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6
0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
0x0000000100000000 - 0x000000047b600000 size 0x37b600000 type 6
MTRR: Fixed MSR 0x250 0x0606060606060606
MTRR: Fixed MSR 0x258 0x0606060606060606
MTRR: Fixed MSR 0x259 0x0000000000000000
MTRR: Fixed MSR 0x268 0x0606060606060606
MTRR: Fixed MSR 0x269 0x0606060606060606
MTRR: Fixed MSR 0x26a 0x0606060606060606
MTRR: Fixed MSR 0x26b 0x0606060606060606
MTRR: Fixed MSR 0x26c 0x0606060606060606
MTRR: Fixed MSR 0x26d 0x0606060606060606
MTRR: Fixed MSR 0x26e 0x0606060606060606
MTRR: Fixed MSR 0x26f 0x0606060606060606
CPU physical address size: 36 bits
MTRR: default type WB/UC MTRR counts: 4/5.
MTRR: WB selected as default type.
MTRR: 0 base 0x0000000080000000 mask 0x0000000fc0000000 type 0
MTRR: 1 base 0x00000000c0000000 mask 0x0000000ff0000000 type 0
MTRR: 2 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1
MTRR: 3 base 0x00000000e0000000 mask 0x0000000fe0000000 type 0

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

POST: 0x93
CPU has 2 cores, 4 threads enabled.
Setting up SMI for CPU
Will perform SMM setup.
FMAP: area COREBOOT found @ c10200 (4128256 bytes)
CBFS: 'COREBOOT Locator' located CBFS at [c10200:1000000)
CBFS: Locating 'cpu_microcode_blob.bin'
CBFS: Found @ offset 14780 size 6800
microcode: sig=0x306a9 pf=0x10 revision=0x21
CPU: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz.
Loading module at 0x00030000 with entry 0x00030000. filesize: 0x170 memsize: 0x170
Processing 16 relocs. Offset value of 0x00030000
Attempting to start 3 APs
Waiting for 10ms after sending INIT.
Waiting for 1st SIPI to complete...done.
Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1.
done.
AP: slot 2 apic_id 3.
AP: slot 3 apic_id 2.
Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0x00038000
SMM Module: stub loaded at 0x00038000. Will call 0x7ffa3410(0x00000000)
Installing SMM handler to 0x80000000
Loading module at 0x80010000 with entry 0x80010639. filesize: 0x1d10 memsize: 0x5d68
Processing 84 relocs. Offset value of 0x80010000
Loading module at 0x80008000 with entry 0x80008000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0x80008000
SMM Module: placing jmp sequence at 0x80007c00 rel16 0x03fd
SMM Module: placing jmp sequence at 0x80007800 rel16 0x07fd
SMM Module: placing jmp sequence at 0x80007400 rel16 0x0bfd
SMM Module: stub loaded at 0x80008000. Will call 0x80010639(0x00000000)
Initializing Southbridge SMI...

New SMBASE 0x80000000
In relocation handler: cpu 0
New SMBASE=0x80000000 IEDBASE=0x80400000
Writing SMRR. base = 0x80000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7ffffc00
In relocation handler: cpu 1
New SMBASE=0x7ffffc00 IEDBASE=0x80400000
Writing SMRR. base = 0x80000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7ffff800
In relocation handler: cpu 2
New SMBASE=0x7ffff800 IEDBASE=0x80400000
Writing SMRR. base = 0x80000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7ffff400
In relocation handler: cpu 3
New SMBASE=0x7ffff400 IEDBASE=0x80400000
Writing SMRR. base = 0x80000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
Initializing CPU #0
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
POST: 0x60
Enabling cache
CPU: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz.
CPU: platform id 4
CPU: cpuid(1) 0x306a9
CPU: AES supported
CPU: TXT supported
CPU: VT supported
Setting up local APIC...
 apic_id: 0x00 done.
VMX status: enabled
IA32_FEATURE_CONTROL status: unlocked
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 2900
Turbo is available but hidden
Turbo is available and visible
CPU #0 initialized
Initializing CPU #1
Initializing CPU #3
Initializing CPU #2
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
POST: 0x60
Enabling cache
POST: 0x60
Enabling cache
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
POST: 0x60
Enabling cache
CPU: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz.
CPU: platform id 4
CPU: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz.
CPU: cpuid(1) 0x306a9
CPU: platform id 4
CPU: AES supported
CPU: TXT supported
CPU: VT supported
CPU: cpuid(1) 0x306a9
Setting up local APIC...
CPU: AES supported
CPU: TXT supported
CPU: VT supported
CPU: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz.
 apic_id: 0x02 done.
Setting up local APIC...
VMX status: enabled
CPU: platform id 4
IA32_FEATURE_CONTROL status: unlocked
 apic_id: 0x03 done.
CPU: cpuid(1) 0x306a9
VMX status: enabled
CPU: AES supported
CPU: TXT supported
CPU: VT supported
IA32_FEATURE_CONTROL status: unlocked
Setting up local APIC...
 apic_id: 0x01 done.
model_x06ax: energy policy set to 6
VMX status: enabled
IA32_FEATURE_CONTROL status: unlocked
model_x06ax: frequency set to 2900
CPU #3 initialized
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 2900
CPU #2 initialized
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 2900
CPU #1 initialized
bsp_do_flight_plan done after 8 msecs.
Initializing southbridge SMI...
SMI_STS: GPI 
GPE0_STS: GPIO15 GPIO14 GPIO11 GPIO9 GPIO7 GPIO5 GPIO4 GPIO3 GPIO2 
ALT_GP_SMI_STS: GPI14 GPI11 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI2 GPI1 
TCO_STS: 
Locking SMM.
CPU_CLUSTER: 0 init finished in 22320 usecs
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
PCI: 00:00.0 init ...
Disabling PEG12.
Disabling PEG11.
Disabling PEG10.
Disabling PEG60.
Disabling Device 7.
Disabling PEG IO clock.
Set BIOS_RESET_CPL
CPU TDP: 35 Watts
PCI: 00:00.0 init finished in 1011 usecs
POST: 0x75
PCI: 00:02.0 init ...
GT Power Management Init
IVB GT2 25W-35W Power Meter Weights
GT Power Management Init (post VBIOS)
PCI: 00:02.0 init finished in 325 usecs
POST: 0x75
PCI: 00:04.0 init ...
PCI: 00:04.0 init finished in 0 usecs
POST: 0x75
PCI: 00:14.0 init ...
XHCI: Setting up controller.. done.
PCI: 00:14.0 init finished in 7 usecs
POST: 0x75
POST: 0x75
PCI: 00:19.0 init ...
PCI: 00:19.0 init finished in 1 usecs
POST: 0x75
PCI: 00:1a.0 init ...
EHCI: Setting up controller.. done.
PCI: 00:1a.0 init finished in 11 usecs
POST: 0x75
PCI: 00:1b.0 init ...
Azalia: base = e2b38000
Azalia: codec_mask = 09
Azalia: Initializing codec #3
Azalia: codec viddid: 80862806
Azalia: verb_size: 16
Azalia: verb loaded.
Azalia: Initializing codec #0
Azalia: codec viddid: 10ec0269
Azalia: verb_size: 76
Azalia: verb loaded.
PCI: 00:1b.0 init finished in 5969 usecs
POST: 0x75
POST: 0x75
PCI: 00:1c.0 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.0 init finished in 9 usecs
POST: 0x75
PCI: 00:1c.1 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.1 init finished in 12 usecs
POST: 0x75
POST: 0x75
PCI: 00:1c.2 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.2 init finished in 11 usecs
POST: 0x75
PCI: 00:1d.0 init ...
EHCI: Setting up controller.. done.
PCI: 00:1d.0 init finished in 11 usecs
POST: 0x75
POST: 0x75
PCI: 00:1f.0 init ...
pch: lpc_init
PCH: detected QM77, device id: 0x1e55, rev id 0x4
IOAPIC: Initializing IOAPIC at 0xfec00000
IOAPIC: Bootstrap Processor Local APIC = 0x00
IOAPIC: ID = 0x02
Set power off after power failure.
NMI sources enabled.
PantherPoint PM init
RTC: failed = 0x0
RTC Init
Disabling ACPI via APMC:
done.
pch_spi_init
PCI: 00:1f.0 init finished in 875 usecs
POST: 0x75
PCI: 00:1f.2 init ...
SATA: Initializing...
SATA: Controller in AHCI mode.
ABAR: 0xe2b3e000
PCI: 00:1f.2 init finished in 233 usecs
POST: 0x75
PCI: 00:1f.3 init ...
PCI: 00:1f.3 init finished in 7 usecs
POST: 0x75
POST: 0x75
PCI: 00:1f.6 init ...
PCI: 00:1f.6 init finished in 0 usecs
POST: 0x75
PCI: 01:00.0 init ...
PCI: 01:00.0 init finished in 1 usecs
POST: 0x75
PCI: 02:00.0 init ...
PCI: 02:00.0 init finished in 0 usecs
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
PNP: 00ff.2 init ...
PNP: 00ff.2 init finished in 0 usecs
POST: 0x75
smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ...
I2C: 01:54 init finished in 2 usecs
POST: 0x75
smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ...
I2C: 01:55 init finished in 1 usecs
POST: 0x75
smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ...
I2C: 01:56 init finished in 1 usecs
POST: 0x75
smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ...
I2C: 01:57 init finished in 1 usecs
POST: 0x75
smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ...
Locking EEPROM RFID
init EEPROM done
I2C: 01:5c init finished in 24866 usecs
POST: 0x75
smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ...
I2C: 01:5d init finished in 1 usecs
POST: 0x75
smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ...
I2C: 01:5e init finished in 1 usecs
POST: 0x75
smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ...
I2C: 01:5f init finished in 1 usecs
Devices initialized
BS: BS_DEV_INIT times (ms): entry 144 run 55 exit 0
POST: 0x76
Finalize devices...
PCI: 00:1f.0 final
Manufacturer: ef
SF: Detected W25Q128_V with sector size 0x1000, total 0x1000000
Devices finalized
BS: BS_POST_DEVICE times (ms): entry 0 run 0 exit 0
POST: 0x77
BS: BS_OS_RESUME_CHECK times (ms): entry 0 run 0 exit 0
POST: 0x79
POST: 0x9c
FMAP: area COREBOOT found @ c10200 (4128256 bytes)
CBFS: 'COREBOOT Locator' located CBFS at [c10200:1000000)
CBFS: Locating 'fallback/dsdt.aml'
CBFS: Found @ offset 55580 size 39b0
FMAP: area COREBOOT found @ c10200 (4128256 bytes)
CBFS: 'COREBOOT Locator' located CBFS at [c10200:1000000)
CBFS: Locating 'fallback/slic'
CBFS: 'fallback/slic' not found.
ACPI: Writing ACPI tables at 7ff4e000.
ACPI:    * FACS
ACPI:    * DSDT
ACPI:    * FADT
ACPI: added table 1/32, length now 40
ACPI:     * SSDT
Found 1 CPU(s) with 4 core(s) each.
PSS: 2901MHz power 35000 control 0x2400 status 0x2400
PSS: 2900MHz power 35000 control 0x1d00 status 0x1d00
PSS: 2400MHz power 27295 control 0x1800 status 0x1800
PSS: 2000MHz power 21703 control 0x1400 status 0x1400
PSS: 1600MHz power 16527 control 0x1000 status 0x1000
PSS: 1200MHz power 11795 control 0xc00 status 0xc00
PSS: 2901MHz power 35000 control 0x2400 status 0x2400
PSS: 2900MHz power 35000 control 0x1d00 status 0x1d00
PSS: 2400MHz power 27295 control 0x1800 status 0x1800
PSS: 2000MHz power 21703 control 0x1400 status 0x1400
PSS: 1600MHz power 16527 control 0x1000 status 0x1000
PSS: 1200MHz power 11795 control 0xc00 status 0xc00
PSS: 2901MHz power 35000 control 0x2400 status 0x2400
PSS: 2900MHz power 35000 control 0x1d00 status 0x1d00
PSS: 2400MHz power 27295 control 0x1800 status 0x1800
PSS: 2000MHz power 21703 control 0x1400 status 0x1400
PSS: 1600MHz power 16527 control 0x1000 status 0x1000
PSS: 1200MHz power 11795 control 0xc00 status 0xc00
PSS: 2901MHz power 35000 control 0x2400 status 0x2400
PSS: 2900MHz power 35000 control 0x1d00 status 0x1d00
PSS: 2400MHz power 27295 control 0x1800 status 0x1800
PSS: 2000MHz power 21703 control 0x1400 status 0x1400
PSS: 1600MHz power 16527 control 0x1000 status 0x1000
PSS: 1200MHz power 11795 control 0xc00 status 0xc00
Generating ACPI PIRQ entries
\_SB.PCI0.LPCB.TPM: LPC TPM PNP: 0c31.0
ACPI:    * H8
H8: BDC detection not implemented. Assuming BDC installed
H8: WWAN detection not implemented. Assuming WWAN installed
ACPI: added table 2/32, length now 44
ACPI:    * MCFG
ACPI: added table 3/32, length now 48
ACPI:    * TCPA
TCPA log created at 0x7ff3d000
ACPI: added table 4/32, length now 52
ACPI:    * MADT
ACPI: added table 5/32, length now 56
current = 7ff53940
ACPI:     * DMAR
ACPI: added table 6/32, length now 60
current = 7ff53a10
FMAP: area COREBOOT found @ c10200 (4128256 bytes)
CBFS: 'COREBOOT Locator' located CBFS at [c10200:1000000)
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 3ec40 size 581
Found a VBT of 4459 bytes after decompression
GMA: Found VBT in CBFS
GMA: Found valid VBT in CBFS
ACPI:    * HPET
ACPI: added table 7/32, length now 64
ACPI: done.
ACPI tables: 31312 bytes.
smbios_write_tables: 7ff3c000
Create SMBIOS type 17
SMBIOS tables: 887 bytes.
Writing table forward entry at 0x00000500
Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 5fe7
Writing coreboot table at 0x7ff72000
FMAP: area COREBOOT found @ c10200 (4128256 bytes)
CBFS: 'COREBOOT Locator' located CBFS at [c10200:1000000)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f200 size 73c
 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
 1. 0000000000001000-000000000009ffff: RAM
 2. 00000000000a0000-00000000000fffff: RESERVED
 3. 0000000000100000-000000007ff3bfff: RAM
 4. 000000007ff3c000-000000007ff8afff: CONFIGURATION TABLES
 5. 000000007ff8b000-000000007ffd0fff: RAMSTAGE
 6. 000000007ffd1000-000000007fffffff: CONFIGURATION TABLES
 7. 0000000080000000-00000000829fffff: RESERVED
 8. 00000000f0000000-00000000f3ffffff: RESERVED
 9. 00000000fed40000-00000000fed44fff: RESERVED
10. 00000000fed90000-00000000fed91fff: RESERVED
11. 0000000100000000-000000047b5fffff: RAM
FMAP: area COREBOOT found @ c10200 (4128256 bytes)
CBFS: 'COREBOOT Locator' located CBFS at [c10200:1000000)
Wrote coreboot table at: 0x7ff72000, 0xaa0 bytes, checksum 9e61
coreboot table: 2744 bytes.
IMD ROOT    0. 0x7ffff000 0x00001000
IMD SMALL   1. 0x7fffe000 0x00001000
CONSOLE     2. 0x7ffde000 0x00020000
TIME STAMP  3. 0x7ffdd000 0x00000910
ROMSTG STCK 4. 0x7ffdc000 0x00001000
AFTER CAR   5. 0x7ffd1000 0x0000b000
RAMSTAGE    6. 0x7ff8a000 0x00047000
SMM BACKUP  7. 0x7ff7a000 0x00010000
COREBOOT    8. 0x7ff72000 0x00008000
ACPI        9. 0x7ff4e000 0x00024000
ACPI GNVS  10. 0x7ff4d000 0x00001000
TCPA TCGLOG11. 0x7ff3d000 0x00010000
SMBIOS     12. 0x7ff3c000 0x00000800
IMD small region:
  IMD ROOT    0. 0x7fffec00 0x00000400
  FMAP        1. 0x7fffeb20 0x000000e0
  MEM INFO    2. 0x7fffe960 0x000001b9
  ROMSTAGE    3. 0x7fffe940 0x00000004
BS: BS_WRITE_TABLES times (ms): entry 0 run 26 exit 0
POST: 0x7a
FMAP: area COREBOOT found @ c10200 (4128256 bytes)
CBFS: 'COREBOOT Locator' located CBFS at [c10200:1000000)
CBFS: Locating 'fallback/payload'
CBFS: Found @ offset 76400 size 15e2d
Checking segment from ROM address 0xffc86638
Payload being loaded at below 1MiB without region being marked as RAM usable.
Checking segment from ROM address 0xffc86654
Loading segment from ROM address 0xffc86638
  code (compression=2)
  New segment dstaddr 0x000e0280 memsize 0x1fd80 srcaddr 0xffc86670 filesize 0x15df5
Loading Segment: addr: 0x000e0280 memsz: 0x000000000001fd80 filesz: 0x0000000000015df5
using LZ4
Loading segment from ROM address 0xffc86654
  Entry Point 0x000fd25e
BS: BS_PAYLOAD_LOAD times (ms): entry 0 run 53 exit 0
POST: 0x7b
ICH-NM10-PCH: watchdog disabled
Jumping to boot code at 0x000fd25e(0x7ff72000)
POST: 0xf8
SeaBIOS (version rel-1.13.0-0-gf21b5a4)
BUILD: gcc: (coreboot toolchain v3ba84c5950 2019-09-20) 8.3.0 binutils: (GNU Binutils) 2.33.1
Found coreboot cbmem console @ 7ffde000
Found mainboard LENOVO ThinkPad T430s
Relocating init from 0x000e1960 to 0x7feeed60 (size 53760)
Found CBFS header at 0xffc10238
multiboot: eax=7ffbb440, ebx=7ffbb3e4
Found 17 PCI devices (max PCI bus is 03)
Copying SMBIOS entry point from 0x7ff3c000 to 0x000f6780
Copying ACPI RSDP from 0x7ff4e000 to 0x000f6750
Using pmtimer, ioport 0x508
Scan for VGA option rom
Running option rom at c000:0003
Turning on vga text mode console
SeaBIOS (version rel-1.13.0-0-gf21b5a4)
Machine UUID 89966681-43e8-11cb-86b2-c243510b3449
XHCI init on dev 00:14.0: regs @ 0xe2b20000, 8 ports, 32 slots, 32 byte contexts
XHCI    protocol USB  2.00, 4 ports (offset 1), def 3001
XHCI    protocol USB  3.00, 4 ports (offset 5), def 1000
XHCI    extcap 0xc1 @ 0xe2b28040
XHCI    extcap 0xc0 @ 0xe2b28070
XHCI    extcap 0x1 @ 0xe2b28330
EHCI init on dev 00:1a.0 (regs=0xe2b3f020)
EHCI init on dev 00:1d.0 (regs=0xe2b40020)
AHCI controller at 00:1f.2, iobase 0xe2b3e000, irq 10
Searching bootorder for: /pci@i0cf8/pci-bridge@1c,1/*@0
Found 0 lpt ports
Found 0 serial ports
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/tint
Searching bootorder for: /rom@img/nvramcui
Searching bootorder for: /rom@img/coreinfo
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@2/disk@0
AHCI/2: Set transfer mode to UDMA-6
Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@2/disk@0
AHCI/2: registering: "AHCI/2: KINGSTON SUV500MS240G ATA-11 Hard-Disk (223 GiBytes)"
XHCI no devices found
USB keyboard initialized
Initialized USB HUB (0 ports used)
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
AHCI/0: Set transfer mode to UDMA-6
Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@0/disk@0
AHCI/0: registering: "AHCI/0: KINGSTON SKC400S37512G ATA-9 Hard-Disk (476 GiBytes)"
Initialized USB HUB (0 ports used)
Initialized USB HUB (0 ports used)
Initialized USB HUB (0 ports used)
Initialized USB HUB (1 ports used)
Initialized USB HUB (1 ports used)
WARNING - Timeout at ps2_recvbyte:182!
Discarding ps2 data aa (status=11)
Discarding ps2 data e0 (status=11)
Discarding ps2 data 0f (status=11)
Discarding ps2 data e0 (status=11)
Discarding ps2 data f0 (status=11)
Discarding ps2 data 0f (status=11)
WARNING - Timeout at ps2_recvbyte:182!
PS2 keyboard initialized
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0
AHCI/1: Set transfer mode to UDMA-6
Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@1/disk@0
AHCI/1: registering: "AHCI/1: ST2000LM015-2E8174 ATA-10 Hard-Disk (1863 GiBytes)"
WARNING - Timeout at ehci_wait_td:517!
ehci pipe=0x7fee5500 cur=7fedfdc0 tok=80080d80 next=7fedfe00 td=0x7fedfdc0 status=80080d80
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
Running option rom at cf80:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@19

Press ESC for boot menu.

Turning on vga text mode console
SeaBIOS (version rel-1.13.0-0-gf21b5a4)
Machine UUID 89966681-43e8-11cb-86b2-c243510b3449
Select boot device:

1. AHCI/0: KINGSTON SKC400S37512G ATA-9 Hard-Disk (476 GiBytes)
2. AHCI/1: ST2000LM015-2E8174 ATA-10 Hard-Disk (1863 GiBytes)
3. AHCI/2: KINGSTON SUV500MS240G ATA-11 Hard-Disk (223 GiBytes)
4. iPXE (PCI 00:19.0)
5. Payload [memtest]
6. Payload [tint]
7. Payload [nvramcui]
8. Payload [coreinfo]

t. TPM Configuration

Searching bootorder for: HALT
drive 0x000f6690: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=1000215216
drive 0x000f6640: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=3907029168
drive 0x000f66e0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=468862128
Space available for UMB: d0800-ed000, f5fa0-f6640
Returned 180224 bytes of ZoneHigh
e820 map has 9 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000007ff28000 = 1 RAM
  4: 000000007ff28000 - 0000000082a00000 = 2 RESERVED
  5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
  6: 00000000fed40000 - 00000000fed45000 = 2 RESERVED
  7: 00000000fed90000 - 00000000fed92000 = 2 RESERVED
  8: 0000000100000000 - 000000047b600000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00