Patrick Georgi | 2b677d1 | 2018-12-20 16:45:07 +0100 | [diff] [blame] | 1 | |
| 2 | coreboot-4.8-2610-g7f520c8fe6 Wed Dec 19 18:05:51 UTC 2018 romstage starting... |
| 3 | |
| 4 | Mobile Intel(R) 82945GM/GME Express Chipset |
| 5 | (G)MCH capable of up to FSB 800 MHz |
| 6 | (G)MCH capable of up to DDR2-667 |
| 7 | Setting up static southbridge registers... done. |
| 8 | Disabling Watchdog reboot... done. |
| 9 | Setting up static northbridge registers... done. |
| 10 | Waiting for MCHBAR to come up...ok |
| 11 | PM1_CNT: 00001c00 |
| 12 | SMBus controller enabled. |
| 13 | Setting up RAM controller. |
| 14 | This mainboard supports Dual Channel Operation. |
| 15 | Reading SPD using i2c block operation. |
| 16 | DDR II Channel 0 Socket 0: x8DDS |
| 17 | DIMM 0 side 0 = 1024 MB |
| 18 | DIMM 0 side 1 = 1024 MB |
| 19 | DDR II Channel 0 Socket 1: N/A |
| 20 | Reading SPD using i2c block operation. |
| 21 | DDR II Channel 1 Socket 0: x8DDS |
| 22 | DIMM 2 side 0 = 512 MB |
| 23 | DIMM 2 side 1 = 512 MB |
| 24 | DDR II Channel 1 Socket 1: N/A |
| 25 | Memory will be driven at 533MT with CAS=4 clocks |
| 26 | tRAS = 12 cycles |
| 27 | tRP = 4 cycles |
| 28 | tRCD = 4 cycles |
| 29 | tWR = 4 cycles |
| 30 | tRFC = 34 cycles |
| 31 | Refresh: 7.8us |
| 32 | Setting Graphics Frequency... |
| 33 | FSB: 667 MHz Voltage: 1.05V Render: 250MHz Display: 200MHz |
| 34 | Setting Memory Frequency... CLKCFG = 0x00010023, MVCO 4x, second VCO, CLKCFG = 0x200100b3, ok |
| 35 | Setting mode of operation for memory channels...Dual Channel Asymmetric. |
| 36 | Programming Clock Crossing...MEM=533 FSB=667... ok |
| 37 | Setting RAM size... |
| 38 | C0DRB = 0x40404020 |
| 39 | C1DRB = 0x60606050 |
| 40 | TOLUD = 0x00c0 |
| 41 | Setting row attributes... |
| 42 | C0DRA = 0x0033 |
| 43 | C1DRA = 0x0033 |
| 44 | one dimm per channel config.. |
| 45 | Initializing System Memory IO... |
| 46 | Programming Dual Channel RCOMP |
| 47 | Table Index: 18 |
| 48 | Programming DLL Timings... |
| 49 | Enabling System Memory IO... |
| 50 | jedec enable sequence: bank 0 |
| 51 | jedec enable sequence: bank 1 |
| 52 | bankaddr from bank size of rank 0 |
| 53 | jedec enable sequence: bank 4 |
| 54 | bankaddr from bank size of rank 1 |
| 55 | jedec enable sequence: bank 5 |
| 56 | bankaddr from bank size of rank 4 |
| 57 | RAM initialization finished. |
| 58 | Setting up Egress Port RCRB |
| 59 | Loading port arbitration table ...ok |
| 60 | Wait for VC1 negotiation ...ok |
| 61 | Setting up DMI RCRB |
| 62 | Wait for VC1 negotiation ...done.. |
| 63 | Internal graphics: enabled |
| 64 | Waiting for DMI hardware...ok |
| 65 | Enabling PCI Express x16 Link |
| 66 | SLOTSTS: 0000 |
| 67 | Disabling PCI Express x16 Link |
| 68 | Wait for link to enter detect state... ok |
| 69 | Setting up Root Complex Topology |
| 70 | CBMEM: |
| 71 | IMD: root @ bf3ff000 254 entries. |
| 72 | IMD: root @ bf3fec00 62 entries. |
| 73 | MTRR Range: Start=ffc00000 End=0 (Size 400000) |
| 74 | MTRR Range: Start=0 End=1000000 (Size 1000000) |
| 75 | MTRR Range: Start=bec00000 End=bf000000 (Size 400000) |
| 76 | MTRR Range: Start=bf000000 End=bf400000 (Size 400000) |
| 77 | MTRR Range: Start=bf600000 End=bf800000 (Size 200000) |
| 78 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 79 | CBFS: Locating 'fallback/postcar' |
| 80 | CBFS: Found @ offset 3df00 size 39e4 |
| 81 | Decompressing stage fallback/postcar @ 0xbf3cffc0 (31472 bytes) |
| 82 | Loading module at bf3d0000 with entry bf3d0000. filesize: 0x3810 memsize: 0x7ab0 |
| 83 | Processing 94 relocs. Offset value of 0xbd3d0000 |
| 84 | |
| 85 | |
| 86 | coreboot-4.8-2610-g7f520c8fe6 Wed Dec 19 18:05:51 UTC 2018 postcar starting... |
| 87 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 88 | CBFS: Locating 'fallback/ramstage' |
| 89 | CBFS: Found @ offset 22880 size 13ef9 |
| 90 | Decompressing stage fallback/ramstage @ 0xbf38cfc0 (233720 bytes) |
| 91 | Loading module at bf38d000 with entry bf38d000. filesize: 0x29748 memsize: 0x390b8 |
| 92 | Processing 2750 relocs. Offset value of 0xbe58d000 |
| 93 | |
| 94 | |
| 95 | coreboot-4.8-2610-g7f520c8fe6 Wed Dec 19 18:05:51 UTC 2018 ramstage starting... |
| 96 | Normal boot. |
| 97 | BS: BS_PRE_DEVICE times (us): entry 0 run 0 exit 0 |
| 98 | BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 1 exit 0 |
| 99 | Enumerating buses... |
| 100 | CPU_CLUSTER: 0 enabled |
| 101 | DOMAIN: 0000 enabled |
| 102 | PCI: pci_scan_bus for bus 00 |
| 103 | PCI: 00:00.0 [8086/27a0] enabled |
| 104 | PCI: 00:02.0 [8086/27a2] enabled |
| 105 | PCI: 00:02.1 [8086/27a6] enabled |
| 106 | PCI: 00:1b.0 [8086/27d8] enabled |
| 107 | PCI: 00:1c.0 [8086/27d0] enabled |
| 108 | PCI: 00:1c.1 [8086/27d2] enabled |
| 109 | PCI: 00:1c.2 [8086/27d4] enabled |
| 110 | PCI: 00:1c.3 [8086/27d6] enabled |
| 111 | PCI: 00:1d.0 [8086/27c8] enabled |
| 112 | PCI: 00:1d.1 [8086/27c9] enabled |
| 113 | PCI: 00:1d.2 [8086/27ca] enabled |
| 114 | PCI: 00:1d.3 [8086/27cb] enabled |
| 115 | PCI: 00:1d.7 [8086/27cc] enabled |
| 116 | PCI: 00:1e.0 [8086/2448] enabled |
| 117 | PCI: 00:1f.0 [8086/27b9] enabled |
| 118 | Set SATA mode early |
| 119 | Set SATA mode early |
| 120 | PCI: 00:1f.2 [8086/27c4] enabled |
| 121 | PCI: 00:1f.3 [8086/27da] enabled |
| 122 | PCI: Left over static devices: |
| 123 | PCI: 00:1e.2 |
| 124 | PCI: 00:1e.3 |
| 125 | PCI: Check your devicetree.cb. |
| 126 | PCI: pci_scan_bus for bus 01 |
| 127 | scan_bus: scanning of bus PCI: 00:1c.0 took 2652 usecs |
| 128 | PCI: pci_scan_bus for bus 02 |
| 129 | PCI: 02:00.0 [8086/4222] enabled |
| 130 | scan_bus: scanning of bus PCI: 00:1c.1 took 5623 usecs |
| 131 | PCI: pci_scan_bus for bus 03 |
| 132 | scan_bus: scanning of bus PCI: 00:1c.2 took 2652 usecs |
| 133 | PCI: pci_scan_bus for bus 04 |
| 134 | PCI: 04:00.0 [10ec/8168] enabled |
| 135 | scan_bus: scanning of bus PCI: 00:1c.3 took 5614 usecs |
| 136 | PCI: pci_scan_bus for bus 05 |
| 137 | PCI: 05:05.0 [104c/8039] enabled |
| 138 | PCI: 05:05.1 [104c/803a] enabled |
| 139 | PCI: 05:05.2 [104c/803b] enabled |
| 140 | PCI: 05:05.3 [104c/803c] enabled |
| 141 | PCI: 05:05.4 [104c/803d] enabled |
| 142 | PCI: pci_scan_bus for bus 06 |
| 143 | scan_bus: scanning of bus PCI: 05:05.0 took 2668 usecs |
| 144 | scan_bus: scanning of bus PCI: 00:1e.0 took 25007 usecs |
| 145 | PNP: 002e.0 disabled |
| 146 | PNP: 002e.1 disabled |
| 147 | PNP: 002e.3 enabled |
| 148 | PNP: 002e.4 enabled |
| 149 | PNP: 002e.5 disabled |
| 150 | PNP: 002e.7 disabled |
| 151 | PNP: 002e.8 disabled |
| 152 | PNP: 004e.0 disabled |
| 153 | PNP: 004e.1 disabled |
| 154 | PNP: 004e.5 enabled |
| 155 | PNP: 004e.7 disabled |
| 156 | PNP: 004e.8 disabled |
| 157 | PNP: 004e.9 disabled |
| 158 | PNP: 004e.a disabled |
| 159 | PNP: 004e.b disabled |
| 160 | scan_bus: scanning of bus PCI: 00:1f.0 took 28510 usecs |
| 161 | scan_bus: scanning of bus PCI: 00:1f.3 took 2 usecs |
| 162 | scan_bus: scanning of bus DOMAIN: 0000 took 168761 usecs |
| 163 | scan_bus: scanning of bus Root Device took 177805 usecs |
| 164 | done |
| 165 | BS: BS_DEV_ENUMERATE times (us): entry 0 run 185229 exit 0 |
| 166 | found VGA at PCI: 00:02.0 |
| 167 | Setting up VGA for PCI: 00:02.0 |
| 168 | Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| 169 | Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| 170 | Allocating resources... |
| 171 | Reading resources... |
| 172 | pci_tolm: 0xffffffff |
| 173 | IGD decoded, subtracting 8M UMA |
| 174 | TSEG decoded, subtracting 2M |
| 175 | Unused RAM between cbmem_top and TOM: 0x800K |
| 176 | Available memory: 3133440K (3060M) |
| 177 | Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000. |
| 178 | PNP: 002e.3 missing read_resources |
| 179 | Done reading resources. |
| 180 | skipping PNP: 002e.3@60 fixed resource, size=0! |
| 181 | skipping PNP: 002e.3@70 fixed resource, size=0! |
| 182 | Setting resources... |
| 183 | DOMAIN: 0000 03 <- [0x0000000000 - 0x000009ffff] size 0x000a0000 gran 0x00 mem |
| 184 | DOMAIN: 0000 04 <- [0x00000c0000 - 0x00bfffffff] size 0xbff40000 gran 0x00 mem |
| 185 | DOMAIN: 0000 05 <- [0x00bf800000 - 0x00bfffffff] size 0x00800000 gran 0x00 mem |
| 186 | DOMAIN: 0000 06 <- [0x00bf600000 - 0x00bf7fffff] size 0x00200000 gran 0x00 mem |
| 187 | DOMAIN: 0000 07 <- [0x00bf400000 - 0x00bf5fffff] size 0x00200000 gran 0x00 mem |
| 188 | PCI: 00:02.0 10 <- [0x00e4300000 - 0x00e437ffff] size 0x00080000 gran 0x13 mem |
| 189 | PCI: 00:02.0 14 <- [0x0000004090 - 0x0000004097] size 0x00000008 gran 0x03 io |
| 190 | PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem |
| 191 | PCI: 00:02.0 1c <- [0x00e4400000 - 0x00e443ffff] size 0x00040000 gran 0x12 mem |
| 192 | PCI: 00:02.1 10 <- [0x00e4380000 - 0x00e43fffff] size 0x00080000 gran 0x13 mem |
| 193 | PCI: 00:1b.0 10 <- [0x00e4440000 - 0x00e4443fff] size 0x00004000 gran 0x0e mem64 |
| 194 | PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io |
| 195 | PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem |
| 196 | PCI: 00:1c.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 mem |
| 197 | PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io |
| 198 | PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem |
| 199 | PCI: 00:1c.1 20 <- [0x00e4100000 - 0x00e41fffff] size 0x00100000 gran 0x14 bus 02 mem |
| 200 | PCI: 02:00.0 10 <- [0x00e4100000 - 0x00e4100fff] size 0x00001000 gran 0x0c mem |
| 201 | PCI: 00:1c.2 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io |
| 202 | PCI: 00:1c.2 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem |
| 203 | PCI: 00:1c.2 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 mem |
| 204 | PCI: 00:1c.3 1c <- [0x0000003000 - 0x0000003fff] size 0x00001000 gran 0x0c bus 04 io |
| 205 | PCI: 00:1c.3 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 04 prefmem |
| 206 | PCI: 00:1c.3 20 <- [0x00e4200000 - 0x00e42fffff] size 0x00100000 gran 0x14 bus 04 mem |
| 207 | PCI: 04:00.0 10 <- [0x0000003000 - 0x00000030ff] size 0x00000100 gran 0x08 io |
| 208 | PCI: 04:00.0 18 <- [0x00e4220000 - 0x00e4220fff] size 0x00001000 gran 0x0c mem64 |
| 209 | PCI: 04:00.0 30 <- [0x00e4200000 - 0x00e421ffff] size 0x00020000 gran 0x11 romem |
| 210 | PCI: 00:1d.0 20 <- [0x0000004000 - 0x000000401f] size 0x00000020 gran 0x05 io |
| 211 | PCI: 00:1d.1 20 <- [0x0000004020 - 0x000000403f] size 0x00000020 gran 0x05 io |
| 212 | PCI: 00:1d.2 20 <- [0x0000004040 - 0x000000405f] size 0x00000020 gran 0x05 io |
| 213 | PCI: 00:1d.3 20 <- [0x0000004060 - 0x000000407f] size 0x00000020 gran 0x05 io |
| 214 | PCI: 00:1d.7 10 <- [0x00e4444000 - 0x00e44443ff] size 0x00000400 gran 0x0a mem |
| 215 | PCI: 00:1e.0 1c <- [0x0000001000 - 0x0000002fff] size 0x00002000 gran 0x0c bus 05 io |
| 216 | PCI: 00:1e.0 24 <- [0x00e2100000 - 0x00e40fffff] size 0x02000000 gran 0x14 bus 05 prefmem |
| 217 | PCI: 00:1e.0 20 <- [0x00e0000000 - 0x00e20fffff] size 0x02100000 gran 0x14 bus 05 mem |
| 218 | PCI: 05:05.0 In set resources |
| 219 | PCI: 05:05.0 10 <- [0x00e2004000 - 0x00e2004fff] size 0x00001000 gran 0x0c mem |
| 220 | PCI: 05:05.0 2c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x02 io |
| 221 | PCI: 05:05.0 34 <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x02 io |
| 222 | PCI: 05:05.0 1c <- [0x00e2100000 - 0x00e40fffff] size 0x02000000 gran 0x0c prefmem |
| 223 | PCI: 05:05.0 24 <- [0x00e0004000 - 0x00e2003fff] size 0x02000000 gran 0x0c mem |
| 224 | PCI: 05:05.0 done set resources |
| 225 | PCI: 05:05.1 10 <- [0x00e2008000 - 0x00e20087ff] size 0x00000800 gran 0x0b mem |
| 226 | PCI: 05:05.1 14 <- [0x00e0000000 - 0x00e0003fff] size 0x00004000 gran 0x0e mem |
| 227 | PCI: 05:05.2 10 <- [0x00e2005000 - 0x00e2005fff] size 0x00001000 gran 0x0c mem |
| 228 | PCI: 05:05.3 10 <- [0x00e2009000 - 0x00e20090ff] size 0x00000100 gran 0x08 mem |
| 229 | PCI: 05:05.4 10 <- [0x00e2006000 - 0x00e2006fff] size 0x00001000 gran 0x0c mem |
| 230 | PCI: 05:05.4 14 <- [0x00e2007000 - 0x00e2007fff] size 0x00001000 gran 0x0c mem |
| 231 | PNP: 002e.3 missing set_resources |
| 232 | PNP: 002e.4 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io |
| 233 | PNP: 002e.4 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq |
| 234 | PNP: 004e.5 60 <- [0x0000000060 - 0x0000000067] size 0x00000008 gran 0x03 io |
| 235 | PNP: 004e.5 62 <- [0x0000000064 - 0x000000006b] size 0x00000008 gran 0x03 io |
| 236 | PCI: 00:1f.2 10 <- [0x0000004098 - 0x000000409f] size 0x00000008 gran 0x03 io |
| 237 | PCI: 00:1f.2 14 <- [0x00000040a8 - 0x00000040ab] size 0x00000004 gran 0x02 io |
| 238 | PCI: 00:1f.2 18 <- [0x00000040a0 - 0x00000040a7] size 0x00000008 gran 0x03 io |
| 239 | PCI: 00:1f.2 1c <- [0x00000040ac - 0x00000040af] size 0x00000004 gran 0x02 io |
| 240 | PCI: 00:1f.2 20 <- [0x0000004080 - 0x000000408f] size 0x00000010 gran 0x04 io |
| 241 | PCI: 00:1f.2 24 <- [0x00e4445000 - 0x00e44453ff] size 0x00000400 gran 0x0a mem |
| 242 | Done setting resources. |
| 243 | Done allocating resources. |
| 244 | BS: BS_DEV_RESOURCES times (us): entry 0 run 468355 exit 0 |
| 245 | Enabling resources... |
| 246 | PCI: 00:00.0 subsystem <- 8086/27a0 |
| 247 | PCI: 00:00.0 cmd <- 06 |
| 248 | PCI: 00:02.0 subsystem <- 8086/27a2 |
| 249 | PCI: 00:02.0 cmd <- 03 |
| 250 | PCI: 00:02.1 subsystem <- 8086/27a6 |
| 251 | PCI: 00:02.1 cmd <- 02 |
| 252 | PCI: 00:1b.0 subsystem <- 8086/27d8 |
| 253 | PCI: 00:1b.0 cmd <- 102 |
| 254 | PCI: 00:1c.0 bridge ctrl <- 0003 |
| 255 | PCI: 00:1c.0 subsystem <- 8086/27d0 |
| 256 | PCI: 00:1c.0 cmd <- 100 |
| 257 | PCI: 00:1c.1 bridge ctrl <- 0003 |
| 258 | PCI: 00:1c.1 subsystem <- 8086/27d2 |
| 259 | PCI: 00:1c.1 cmd <- 106 |
| 260 | PCI: 00:1c.2 bridge ctrl <- 0003 |
| 261 | PCI: 00:1c.2 subsystem <- 8086/27d4 |
| 262 | PCI: 00:1c.2 cmd <- 100 |
| 263 | PCI: 00:1c.3 bridge ctrl <- 0003 |
| 264 | PCI: 00:1c.3 subsystem <- 8086/27d6 |
| 265 | PCI: 00:1c.3 cmd <- 107 |
| 266 | PCI: 00:1d.0 subsystem <- 8086/27c8 |
| 267 | PCI: 00:1d.0 cmd <- 01 |
| 268 | PCI: 00:1d.1 subsystem <- 8086/27c9 |
| 269 | PCI: 00:1d.1 cmd <- 01 |
| 270 | PCI: 00:1d.2 subsystem <- 8086/27ca |
| 271 | PCI: 00:1d.2 cmd <- 01 |
| 272 | PCI: 00:1d.3 subsystem <- 8086/27cb |
| 273 | PCI: 00:1d.3 cmd <- 01 |
| 274 | PCI: 00:1d.7 subsystem <- 8086/27cc |
| 275 | PCI: 00:1d.7 cmd <- 102 |
| 276 | PCI: 00:1e.0 bridge ctrl <- 0003 |
| 277 | PCI: 00:1e.0 subsystem <- 0000/0000 |
| 278 | PCI: 00:1e.0 cmd <- 107 |
| 279 | PCI: 00:1f.0 subsystem <- 8086/27b9 |
| 280 | PCI: 00:1f.0 cmd <- 107 |
| 281 | PCI: 00:1f.2 subsystem <- 8086/27c4 |
| 282 | PCI: 00:1f.2 cmd <- 03 |
| 283 | PCI: 00:1f.3 subsystem <- 8086/27da |
| 284 | PCI: 00:1f.3 cmd <- 101 |
| 285 | PCI: 02:00.0 cmd <- 02 |
| 286 | PCI: 04:00.0 cmd <- 03 |
| 287 | PCI: 05:05.0 bridge ctrl <- 0143 |
| 288 | PCI: 05:05.0 cmd <- 07 |
| 289 | PCI: 05:05.1 cmd <- 02 |
| 290 | PCI: 05:05.2 cmd <- 02 |
| 291 | PCI: 05:05.3 cmd <- 06 |
| 292 | PCI: 05:05.4 cmd <- 02 |
| 293 | done. |
| 294 | BS: BS_DEV_ENABLE times (us): entry 0 run 126121 exit 0 |
| 295 | Initializing devices... |
| 296 | Root Device init ... |
| 297 | Root Device init finished in 2460 usecs |
| 298 | CPU_CLUSTER: 0 init ... |
| 299 | start_eip=0x00001000, code_size=0x00000031 |
| 300 | Setting up SMI for CPU |
| 301 | Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8 |
| 302 | Processing 13 relocs. Offset value of 0x00038000 |
| 303 | SMM Module: stub loaded at 00038000. Will call bf3a38e3(bf3c1f80) |
| 304 | Installing SMM handler to 0xbf600000 |
| 305 | Loading module at bf610000 with entry bf61013a. filesize: 0xa10 memsize: 0x4a28 |
| 306 | Processing 38 relocs. Offset value of 0xbf610000 |
| 307 | Loading module at bf608000 with entry bf608000. filesize: 0x1a8 memsize: 0x1a8 |
| 308 | Processing 13 relocs. Offset value of 0xbf608000 |
| 309 | SMM Module: placing jmp sequence at bf607c00 rel16 0x03fd |
| 310 | SMM Module: stub loaded at bf608000. Will call bf61013a(00000000) |
| 311 | Initializing southbridge SMI... |
| 312 | SMI_STS: MCSMI GPI PM1 |
| 313 | GPE0_STS: GPIO11 GPIO8 GPIO7 GPIO5 GPIO4 GPIO3 GPIO2 GPIO1 GPIO0 |
| 314 | ALT_GP_SMI_STS: GPI11 GPI8 GPI7 GPI5 GPI4 GPI3 GPI2 GPI1 GPI0 |
| 315 | TCO_STS: |
| 316 | In relocation handler: cpu 0 |
| 317 | New SMBASE=0xbf600000 @ 0003fc00 |
| 318 | Relocation complete. |
| 319 | Locking SMM. |
| 320 | Initializing CPU #0 |
| 321 | CPU: vendor Intel device 6f6 |
| 322 | CPU: family 06, model 0f, stepping 06 |
| 323 | Enabling cache |
| 324 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 325 | CBFS: Locating 'cpu_microcode_blob.bin' |
| 326 | CBFS: Found @ offset b800 size 17000 |
| 327 | microcode: sig=0x6f6 pf=0x20 revision=0x0 |
| 328 | microcode: updated to revision 0xd1 date=2010-10-01 |
| 329 | CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz. |
| 330 | MTRR: Physical address space: |
| 331 | 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 |
| 332 | 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 |
| 333 | 0x00000000000c0000 - 0x00000000bf400000 size 0xbf340000 type 6 |
| 334 | 0x00000000bf400000 - 0x00000000d0000000 size 0x10c00000 type 0 |
| 335 | 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 |
| 336 | 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 |
| 337 | MTRR: Fixed MSR 0x250 0x0606060606060606 |
| 338 | MTRR: Fixed MSR 0x258 0x0606060606060606 |
| 339 | MTRR: Fixed MSR 0x259 0x0000000000000000 |
| 340 | MTRR: Fixed MSR 0x268 0x0606060606060606 |
| 341 | MTRR: Fixed MSR 0x269 0x0606060606060606 |
| 342 | MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| 343 | MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| 344 | MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| 345 | MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| 346 | MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| 347 | MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| 348 | CPU physical address size: 36 bits |
| 349 | MTRR: default type WB/UC MTRR counts: 5/5. |
| 350 | MTRR: UC selected as default type. |
| 351 | MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 |
| 352 | MTRR: 1 base 0x0000000080000000 mask 0x0000000fc0000000 type 6 |
| 353 | MTRR: 2 base 0x00000000bf400000 mask 0x0000000fffc00000 type 0 |
| 354 | MTRR: 3 base 0x00000000bf800000 mask 0x0000000fff800000 type 0 |
| 355 | MTRR: 4 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 |
| 356 | |
| 357 | MTRR check |
| 358 | Fixed MTRRs : Enabled |
| 359 | Variable MTRRs: Enabled |
| 360 | |
| 361 | Setting up local APIC... apic_id: 0x00 done. |
| 362 | VMX status: enabled, locked |
| 363 | CPU: 0 2 siblings |
| 364 | CPU: 0 has sibling 1 |
| 365 | CPU #0 initialized |
| 366 | In relocation handler: cpu 1 |
| 367 | New SMBASE=0xbf5ffc00 @ 0003fc00 |
| 368 | Initializing CPU #1 |
| 369 | Waiting for 1 CPUS to stop |
| 370 | CPU: vendor Intel device 6f6 |
| 371 | CPU: family 06, model 0f, stepping 06 |
| 372 | Enabling cache |
| 373 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 374 | CBFS: Locating 'cpu_microcode_blob.bin' |
| 375 | CBFS: Found @ offset b800 size 17000 |
| 376 | microcode: sig=0x6f6 pf=0x20 revision=0x0 |
| 377 | microcode: updated to revision 0xd1 date=2010-10-01 |
| 378 | CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz. |
| 379 | MTRR: Fixed MSR 0x250 0x0606060606060606 |
| 380 | MTRR: Fixed MSR 0x258 0x0606060606060606 |
| 381 | MTRR: Fixed MSR 0x259 0x0000000000000000 |
| 382 | MTRR: Fixed MSR 0x268 0x0606060606060606 |
| 383 | MTRR: Fixed MSR 0x269 0x0606060606060606 |
| 384 | MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| 385 | MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| 386 | MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| 387 | MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| 388 | MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| 389 | MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| 390 | CPU physical address size: 36 bits |
| 391 | |
| 392 | MTRR check |
| 393 | Fixed MTRRs : Enabled |
| 394 | Variable MTRRs: Enabled |
| 395 | |
| 396 | Setting up local APIC... apic_id: 0x01 done. |
| 397 | VMX status: enabled, locked |
| 398 | CPU: 1 2 siblings |
| 399 | CPU #1 initialized |
| 400 | CPU 1 going down... |
| 401 | All AP CPUs stopped (9761 loops) |
| 402 | CPU_CLUSTER: 0 init finished in 384296 usecs |
| 403 | PCI: 00:02.0 init ... |
| 404 | Initializing VGA without OPROM. |
| 405 | No display connected on slave 2 |
| 406 | WARNING: EDID block does NOT fully conform to EDID 1.3. |
| 407 | Missing name descriptor |
| 408 | Missing monitor ranges |
| 409 | bringing up panel at resolution 1280 x 800 |
| 410 | Borders 0 x 0 |
| 411 | Blank 130 x 19 |
| 412 | Sync 26 x 4 |
| 413 | Front porch 39 x 2 |
| 414 | DREF clock |
| 415 | Single channel |
| 416 | Polarities 1, 1 |
| 417 | Pixel N=3, M1=16, M2=5, P1=2 |
| 418 | Pixel clock 69285 kHz |
| 419 | VGA mode: text |
| 420 | waiting for panel powerup |
| 421 | panel powered up |
| 422 | gtt_setup is enabled. |
| 423 | 8M UMA |
| 424 | GTT PGETBL_CTL register: 0xbffc0001 |
| 425 | GTT Enabled |
| 426 | PCI: 00:02.0 init finished in 138000 usecs |
| 427 | PCI: 00:02.1 init ... |
| 428 | PCI: 00:02.1 init finished in 2002 usecs |
| 429 | PCI: 00:1b.0 init ... |
| 430 | Azalia: codec type: Azalia |
| 431 | Azalia: base = e4440000 |
| 432 | Azalia: codec_mask = 03 |
| 433 | Azalia: Initializing codec #1 |
| 434 | Azalia: codec viddid: 14f12c06 |
| 435 | Azalia: No verb! |
| 436 | Azalia: Initializing codec #0 |
| 437 | Azalia: codec viddid: 10ec0262 |
| 438 | Azalia: verb_size: 52 |
| 439 | Azalia: verb loaded. |
| 440 | PCI: 00:1b.0 init finished in 30482 usecs |
| 441 | PCI: 00:1c.0 init ... |
| 442 | Initializing ICH7 PCIe bridge. |
| 443 | PCI: 00:1c.0 init finished in 4803 usecs |
| 444 | PCI: 00:1c.1 init ... |
| 445 | Initializing ICH7 PCIe bridge. |
| 446 | PCI: 00:1c.1 init finished in 4803 usecs |
| 447 | PCI: 00:1c.2 init ... |
| 448 | Initializing ICH7 PCIe bridge. |
| 449 | PCI: 00:1c.2 init finished in 4802 usecs |
| 450 | PCI: 00:1c.3 init ... |
| 451 | Initializing ICH7 PCIe bridge. |
| 452 | PCI: 00:1c.3 init finished in 4802 usecs |
| 453 | PCI: 00:1d.0 init ... |
| 454 | UHCI: Setting up controller.. done. |
| 455 | PCI: 00:1d.0 init finished in 5226 usecs |
| 456 | PCI: 00:1d.1 init ... |
| 457 | UHCI: Setting up controller.. done. |
| 458 | PCI: 00:1d.1 init finished in 5228 usecs |
| 459 | PCI: 00:1d.2 init ... |
| 460 | UHCI: Setting up controller.. done. |
| 461 | PCI: 00:1d.2 init finished in 5228 usecs |
| 462 | PCI: 00:1d.3 init ... |
| 463 | UHCI: Setting up controller.. done. |
| 464 | PCI: 00:1d.3 init finished in 5228 usecs |
| 465 | PCI: 00:1d.7 init ... |
| 466 | EHCI: Setting up controller.. done. |
| 467 | PCI: 00:1d.7 init finished in 5232 usecs |
| 468 | PCI: 00:1e.0 init ... |
| 469 | PCI: 00:1e.0 init finished in 2013 usecs |
| 470 | PCI: 00:1f.0 init ... |
| 471 | i82801gx: lpc_init |
| 472 | IOAPIC: Initializing IOAPIC at 0xfec00000 |
| 473 | IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| 474 | IOAPIC: ID = 0x02 |
| 475 | Set power on after power failure. |
| 476 | NMI sources disabled. |
| 477 | rtc_failed = 0x0 |
| 478 | RTC Init |
| 479 | Disabling ACPI via APMC: |
| 480 | done. |
| 481 | Locking SMM. |
| 482 | PCI: 00:1f.0 init finished in 25087 usecs |
| 483 | PCI: 00:1f.2 init ... |
| 484 | i82801gx_sata: initializing... |
| 485 | SATA controller in combined mode. |
| 486 | PCI: 00:1f.2 init finished in 7851 usecs |
| 487 | PCI: 02:00.0 init ... |
| 488 | PCI: 02:00.0 init finished in 2001 usecs |
| 489 | PCI: 04:00.0 init ... |
| 490 | PCI: 04:00.0 init finished in 2002 usecs |
| 491 | PCI: 05:05.0 init ... |
| 492 | TI PCIxx12 init |
| 493 | PCI: 05:05.0 init finished in 3481 usecs |
| 494 | PCI: 05:05.1 init ... |
| 495 | PCI: 05:05.1 init finished in 2001 usecs |
| 496 | PCI: 05:05.2 init ... |
| 497 | PCI: 05:05.2 init finished in 2002 usecs |
| 498 | PCI: 05:05.3 init ... |
| 499 | PCI: 05:05.3 init finished in 2002 usecs |
| 500 | PCI: 05:05.4 init ... |
| 501 | PCI: 05:05.4 init finished in 2002 usecs |
| 502 | PNP: 002e.4 init ... |
| 503 | PNP: 002e.4 init finished in 1914 usecs |
| 504 | PNP: 004e.5 init ... |
| 505 | PNP: 004e.5 init finished in 1914 usecs |
| 506 | Devices initialized |
| 507 | BS: BS_DEV_INIT times (us): entry 7 run 756212 exit 0 |
| 508 | Finalize devices... |
| 509 | PCI: 00:1f.0 final |
| 510 | Devices finalized |
| 511 | BS: BS_POST_DEVICE times (us): entry 0 run 5236 exit 0 |
| 512 | BS: BS_OS_RESUME_CHECK times (us): entry 0 run 0 exit 0 |
| 513 | Copying Interrupt Routing Table to 0x000f0000... done. |
| 514 | Copying Interrupt Routing Table to 0xbf339000... done. |
| 515 | PIRQ table: 320 bytes. |
| 516 | Wrote the mp table end at: 000f0410 - 000f05a4 |
| 517 | Wrote the mp table end at: bf338010 - bf3381a4 |
| 518 | MP table: 420 bytes. |
| 519 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 520 | CBFS: Locating 'fallback/dsdt.aml' |
| 521 | CBFS: Found @ offset 41940 size 3d71 |
| 522 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 523 | CBFS: Locating 'fallback/slic' |
| 524 | CBFS: 'fallback/slic' not found. |
| 525 | ACPI: Writing ACPI tables at bf314000. |
| 526 | ACPI: * FACS |
| 527 | ACPI: * DSDT |
| 528 | ACPI: * FADT |
| 529 | ACPI: added table 1/32, length now 40 |
| 530 | ACPI: * SSDT |
| 531 | Found 1 CPU(s) with 2 core(s) each. |
| 532 | clocks between 1000 and 2000 MHz. |
| 533 | adding 4 P-States between busratio 6 and c, incl. P0 |
| 534 | PSS: 2000MHz power 35000 control 0xc24 status 0xc24 |
| 535 | PSS: 1666MHz power 31666 control 0xa1d status 0xa1d |
| 536 | PSS: 1333MHz power 28333 control 0x818 status 0x818 |
| 537 | PSS: 1000MHz power 25000 control 0x613 status 0x613 |
| 538 | clocks between 1000 and 2000 MHz. |
| 539 | adding 4 P-States between busratio 6 and c, incl. P0 |
| 540 | PSS: 2000MHz power 35000 control 0xc24 status 0xc24 |
| 541 | PSS: 1666MHz power 31666 control 0xa1d status 0xa1d |
| 542 | PSS: 1333MHz power 28333 control 0x818 status 0x818 |
| 543 | PSS: 1000MHz power 25000 control 0x613 status 0x613 |
| 544 | Generating ACPI PIRQ entries |
| 545 | ACPI: added table 2/32, length now 44 |
| 546 | ACPI: * MCFG |
| 547 | ACPI: added table 3/32, length now 48 |
| 548 | ACPI: * MADT |
| 549 | ACPI: added table 4/32, length now 52 |
| 550 | current = bf318920 |
| 551 | ACPI: * ECDT |
| 552 | ACPI: added table 5/32, length now 56 |
| 553 | current = bf318980 |
| 554 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 555 | CBFS: Locating 'vbt.bin' |
| 556 | CBFS: 'vbt.bin' not found. |
| 557 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 558 | CBFS: Locating 'pci8086,27a2.rom' |
| 559 | CBFS: 'pci8086,27a2.rom' not found. |
| 560 | PCI Option ROM loading disabled for PCI: 00:02.0 |
| 561 | GMA: locate_vbt_vbios: aa55 8086 0 0 3 |
| 562 | GMA: Found valid VBT in legacy area |
| 563 | ACPI: * HPET |
| 564 | ACPI: added table 6/32, length now 60 |
| 565 | ACPI: done. |
| 566 | ACPI tables: 27072 bytes. |
| 567 | smbios_write_tables: bf313000 |
| 568 | SMBIOS tables: 343 bytes. |
| 569 | Writing table forward entry at 0x00000500 |
| 570 | Wrote coreboot table at: 00000500, 0x10 bytes, checksum a0aa |
| 571 | Writing coreboot table at 0xbf33a000 |
| 572 | 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 573 | 1. 0000000000001000-000000000009ffff: RAM |
| 574 | 2. 00000000000c0000-00000000bf312fff: RAM |
| 575 | 3. 00000000bf313000-00000000bf38cfff: CONFIGURATION TABLES |
| 576 | 4. 00000000bf38d000-00000000bf3c6fff: RAMSTAGE |
| 577 | 5. 00000000bf3c7000-00000000bf3fffff: CONFIGURATION TABLES |
| 578 | 6. 00000000bf400000-00000000bfffffff: RESERVED |
| 579 | 7. 00000000f0000000-00000000f3ffffff: RESERVED |
| 580 | Manufacturer: 20 |
| 581 | SF: Detected M25P32 with sector size 0x10000, total 0x400000 |
| 582 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 583 | FMAP: Found "FLASH" version 1.1 at 0. |
| 584 | FMAP: base = ffc00000 size = 400000 #areas = 3 |
| 585 | Wrote coreboot table at: bf33a000, 0x35c bytes, checksum 91e7 |
| 586 | coreboot table: 884 bytes. |
| 587 | IMD ROOT 0. bf3ff000 00001000 |
| 588 | IMD SMALL 1. bf3fe000 00001000 |
| 589 | CONSOLE 2. bf3de000 00020000 |
| 590 | TIME STAMP 3. bf3dd000 00000910 |
| 591 | ROMSTG STCK 4. bf3d8000 00005000 |
| 592 | AFTER CAR 5. bf3cf000 00009000 |
| 593 | 57a9e102 6. bf3c7000 00007ab0 |
| 594 | RAMSTAGE 7. bf38c000 0003b000 |
| 595 | 57a9e100 8. bf352000 000390b8 |
| 596 | SMM BACKUP 9. bf342000 00010000 |
| 597 | COREBOOT 10. bf33a000 00008000 |
| 598 | IRQ TABLE 11. bf339000 00001000 |
| 599 | SMP TABLE 12. bf338000 00001000 |
| 600 | ACPI 13. bf314000 00024000 |
| 601 | SMBIOS 14. bf313000 00000800 |
| 602 | IMD small region: |
| 603 | IMD ROOT 0. bf3fec00 00000400 |
| 604 | ROMSTAGE 1. bf3febe0 00000004 |
| 605 | 57a9e002 2. bf3febc0 00000018 |
| 606 | 57a9e000 3. bf3feba0 00000018 |
| 607 | ACPI GNVS 4. bf3feaa0 00000100 |
| 608 | COREBOOTFWD 5. bf3fea60 00000028 |
| 609 | BS: BS_WRITE_TABLES times (us): entry 0 run 334832 exit 0 |
| 610 | CBFS: 'Master Header Locator' located CBFS at [200:400000) |
| 611 | CBFS: Locating 'fallback/payload' |
| 612 | CBFS: Found @ offset 45700 size 10a02 |
| 613 | Checking segment from ROM address 0xffc45938 |
| 614 | Checking segment from ROM address 0xffc45954 |
| 615 | Loading segment from ROM address 0xffc45938 |
| 616 | code (compression=1) |
| 617 | New segment dstaddr 0x000e06a0 memsize 0x1f960 srcaddr 0xffc45970 filesize 0x109ca |
| 618 | Loading Segment: addr: 0x000e06a0 memsz: 0x000000000001f960 filesz: 0x00000000000109ca |
| 619 | using LZMA |
| 620 | Loading segment from ROM address 0xffc45954 |
| 621 | Entry Point 0x000fd258 |
| 622 | BS: BS_PAYLOAD_LOAD times (us): entry 0 run 87056 exit 0 |
| 623 | ICH7 watchdog disabled |
| 624 | Jumping to boot code at 000fd258(bf33a000) |
| 625 | SeaBIOS (version rel-1.12.0-4-g29ba89e-dirty-20181220_163913-pgeorgi) |
| 626 | BUILD: gcc: (coreboot toolchain v1.53 August 16th, 2018) 8.1.0 binutils: (GNU Binutils) 2.30 |
| 627 | Found coreboot cbmem console @ bf3de000 |
| 628 | Found mainboard Getac P470 |
| 629 | Relocating init from 0x000e1d00 to 0xbf2c6560 (size 51712) |
| 630 | Found CBFS header at 0xffc00238 |
| 631 | multiboot: eax=bf3b6280, ebx=bf3b6234 |
| 632 | Found 24 PCI devices (max PCI bus is 06) |
| 633 | Copying SMBIOS entry point from 0xbf313000 to 0x000f6280 |
| 634 | Copying ACPI RSDP from 0xbf314000 to 0x000f6250 |
| 635 | Copying MPTABLE from 0xbf338000/bf338010 to 0x000f60a0 |
| 636 | Copying PIR from 0xbf339000 to 0x000f5f60 |
| 637 | Using pmtimer, ioport 0x508 |
| 638 | Scan for VGA option rom |
| 639 | Running option rom at c000:0003 |
| 640 | pmm call arg1=0 |
| 641 | Turning on vga text mode console |
| 642 | SeaBIOS (version rel-1.12.0-4-g29ba89e-dirty-20181220_163913-pgeorgi) |
| 643 | EHCI init on dev 00:1d.7 (regs=0xe4444020) |
| 644 | UHCI init on dev 00:1d.0 (io=4000) |
| 645 | UHCI init on dev 00:1d.1 (io=4020) |
| 646 | UHCI init on dev 00:1d.2 (io=4040) |
| 647 | UHCI init on dev 00:1d.3 (io=4060) |
| 648 | ATA controller 1 at 1f0/3f4/0 (irq 14 dev fa) |
| 649 | ATA controller 2 at 170/374/0 (irq 15 dev fa) |
| 650 | Searching bootorder for: /pci@i0cf8/pci-bridge@1e/*@5,3 |
| 651 | Found 0 lpt ports |
| 652 | Found 2 serial ports |
| 653 | DVD/CD [ata1-0: MATSHITADVD-RAM UJ-850S ATAPI-7 DVD/CD] |
| 654 | Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0 |
| 655 | PS2 keyboard initialized |
| 656 | ata0-0: FUJITSU MHW2120BH ATA-8 Hard-Disk (111 GiBytes) |
| 657 | Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0 |
| 658 | Initialized USB HUB (0 ports used) |
| 659 | All threads complete. |
| 660 | Scan for option roms |
| 661 | |
| 662 | Press ESC for boot menu. |
| 663 | |
| 664 | Searching bootorder for: HALT |
| 665 | drive 0x000f5ec0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=234441648 |
| 666 | Space available for UMB: c7000-ed000, f5aa0-f5e90 |
| 667 | Returned 262144 bytes of ZoneHigh |
| 668 | e820 map has 6 items: |
| 669 | 0: 0000000000000000 - 000000000009fc00 = 1 RAM |
| 670 | 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED |
| 671 | 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED |
| 672 | 3: 0000000000100000 - 00000000bf313000 = 1 RAM |
| 673 | 4: 00000000bf313000 - 00000000c0000000 = 2 RESERVED |
| 674 | 5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED |
| 675 | enter handle_19: |
| 676 | NULL |
| 677 | Booting from DVD/CD... |
| 678 | Device reports MEDIUM NOT PRESENT |
| 679 | scsi_is_ready returned -1 |
| 680 | Boot failed: Could not read from CDROM (code 0003) |
| 681 | enter handle_18: |
| 682 | NULL |
| 683 | Booting from Hard Disk... |
| 684 | Booting from 0000:7c00 |
| 685 | |