Paul Menzel | 349d698 | 2020-01-08 00:50:24 +0100 | [diff] [blame] | 1 | |
| 2 | coreboot-4.11-738-g1c9746ceaf Tue Jan 7 20:50:03 UTC 2020 bootblock starting (log level: 7)... |
| 3 | FMAP: Found "FLASH" version 1.1 at 0x0. |
| 4 | FMAP: base = 0xfffc0000 size = 0x40000 #areas = 3 |
| 5 | FMAP: area COREBOOT found @ 200 (261632 bytes) |
| 6 | CBFS: 'COREBOOT Locator' located CBFS at [200:40000) |
| 7 | CBFS: Locating 'fallback/romstage' |
| 8 | CBFS: Found @ offset 80 size 4774 |
| 9 | BS: bootblock times (exec / console): total (unknown) / 6 ms |
| 10 | |
| 11 | |
| 12 | coreboot-4.11-738-g1c9746ceaf Tue Jan 7 20:50:03 UTC 2020 romstage starting (log level: 7)... |
| 13 | QEMU: firmware config interface detected |
| 14 | Firmware config version id: 3 |
| 15 | CBMEM: |
| 16 | IMD: root @ 0x3ffff000 254 entries. |
| 17 | IMD: root @ 0x3fffec00 62 entries. |
| 18 | MTRR Range: Start=fffc0000 End=0 (Size 40000) |
| 19 | FMAP: area COREBOOT found @ 200 (261632 bytes) |
| 20 | CBFS: 'COREBOOT Locator' located CBFS at [200:40000) |
| 21 | CBFS: Locating 'fallback/postcar' |
| 22 | CBFS: Found @ offset 120c0 size 4f98 |
| 23 | Decompressing stage fallback/postcar @ 0x3ffd2fc0 (36448 bytes) |
| 24 | Loading module at 0x3ffd3000 with entry 0x3ffd3000. filesize: 0x4b50 memsize: 0x8e20 |
| 25 | Processing 251 relocs. Offset value of 0x3dfd3000 |
| 26 | BS: romstage times (exec / console): total (unknown) / 9 ms |
| 27 | |
| 28 | |
| 29 | coreboot-4.11-738-g1c9746ceaf Tue Jan 7 20:50:03 UTC 2020 postcar starting (log level: 7)... |
| 30 | FMAP: area COREBOOT found @ 200 (261632 bytes) |
| 31 | CBFS: 'COREBOOT Locator' located CBFS at [200:40000) |
| 32 | CBFS: Locating 'fallback/ramstage' |
| 33 | CBFS: Found @ offset 4880 size d162 |
| 34 | Decompressing stage fallback/ramstage @ 0x3ffaafc0 (157192 bytes) |
| 35 | Loading module at 0x3ffab000 with entry 0x3ffab000. filesize: 0x1b4d0 memsize: 0x265c8 |
| 36 | Processing 1831 relocs. Offset value of 0x3f1ab000 |
| 37 | BS: postcar times (exec / console): total (unknown) / 16 ms |
| 38 | |
| 39 | |
| 40 | coreboot-4.11-738-g1c9746ceaf Tue Jan 7 20:50:03 UTC 2020 ramstage starting (log level: 7)... |
| 41 | Enumerating buses... |
| 42 | Root Device scanning... |
| 43 | CPU_CLUSTER: 0 enabled |
| 44 | DOMAIN: 0000 enabled |
| 45 | CPU_CLUSTER: 0 scanning... |
| 46 | QEMU: firmware config interface detected |
| 47 | Firmware config version id: 3 |
| 48 | QEMU: max_cpus is 2 |
| 49 | CPU: APIC: 00 enabled |
| 50 | CPU: APIC: 01 enabled |
| 51 | scan_bus: bus CPU_CLUSTER: 0 finished in 2 msecs |
| 52 | DOMAIN: 0000 scanning... |
| 53 | PCI: pci_scan_bus for bus 00 |
| 54 | PCI: 00:00.0 [8086/1237] enabled |
| 55 | PCI: 00:01.0 [8086/7000] enabled |
| 56 | PCI: 00:01.1 [8086/7010] enabled |
| 57 | PCI: 00:01.3 [8086/7113] enabled |
| 58 | PCI: 00:02.0 [1234/1111] enabled |
| 59 | PCI: 00:03.0 [8086/100e] enabled |
| 60 | PCI: 00:01.0 scanning... |
| 61 | scan_bus: bus PCI: 00:01.0 finished in 0 msecs |
| 62 | PCI: 00:01.3 scanning... |
| 63 | scan_bus: bus PCI: 00:01.3 finished in 0 msecs |
| 64 | scan_bus: bus DOMAIN: 0000 finished in 6 msecs |
| 65 | scan_bus: bus Root Device finished in 11 msecs |
| 66 | done |
| 67 | BS: BS_DEV_ENUMERATE run times (exec / console): 1 / 12 ms |
| 68 | found VGA at PCI: 00:02.0 |
| 69 | Setting up VGA for PCI: 00:02.0 |
| 70 | Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| 71 | Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| 72 | Allocating resources... |
| 73 | Reading resources... |
| 74 | QEMU: e820/res: 0xfeffc000 +0x00004000 |
| 75 | QEMU: e820/ram: 0x00000000 + 0x40000000 |
| 76 | QEMU: reserve ioports 0x0510-0x0511 [firmware-config] |
| 77 | QEMU: reserve ioports 0x5658-0x5658 [vmware-port] |
| 78 | QEMU: reserve ioports 0xae00-0xae0f [pci-hotplug] |
| 79 | QEMU: reserve ioports 0xaf00-0xaf1f [cpu-hotplug] |
| 80 | QEMU: reserve ioports 0xafe0-0xafe3 [piix4-gpe0] |
| 81 | Done reading resources. |
| 82 | Setting resources... |
| 83 | PCI: 00:01.1 20 <- [0x0000005840 - 0x000000584f] size 0x00000010 gran 0x04 io |
| 84 | PCI: 00:02.0 10 <- [0x00fd000000 - 0x00fdffffff] size 0x01000000 gran 0x18 prefmem |
| 85 | PCI: 00:02.0 18 <- [0x00fe070000 - 0x00fe070fff] size 0x00001000 gran 0x0c mem |
| 86 | PCI: 00:02.0 30 <- [0x00fe060000 - 0x00fe06ffff] size 0x00010000 gran 0x10 romem |
| 87 | PCI: 00:03.0 10 <- [0x00fe040000 - 0x00fe05ffff] size 0x00020000 gran 0x11 mem |
| 88 | PCI: 00:03.0 14 <- [0x0000005800 - 0x000000583f] size 0x00000040 gran 0x06 io |
| 89 | PCI: 00:03.0 30 <- [0x00fe000000 - 0x00fe03ffff] size 0x00040000 gran 0x12 romem |
| 90 | Done setting resources. |
| 91 | Done allocating resources. |
| 92 | BS: BS_DEV_RESOURCES run times (exec / console): 3 / 15 ms |
| 93 | Enabling resources... |
| 94 | PCI: 00:00.0 cmd <- 00 |
| 95 | PCI: 00:01.0 cmd <- 00 |
| 96 | PCI: 00:01.1 cmd <- 01 |
| 97 | PCI: 00:01.3 cmd <- 00 |
| 98 | PCI: 00:02.0 cmd <- 03 |
| 99 | PCI: 00:03.0 cmd <- 03 |
| 100 | done. |
| 101 | BS: BS_DEV_ENABLE run times (exec / console): 1 / 3 ms |
| 102 | Initializing devices... |
| 103 | Root Device init |
| 104 | Root Device init finished in 0 msecs |
| 105 | CPU_CLUSTER: 0 init |
| 106 | Initializing CPU #0 |
| 107 | CPU: vendor Intel device 663 |
| 108 | CPU: family 06, model 06, stepping 03 |
| 109 | Setting up local APIC... |
| 110 | apic_id: 0x00 done. |
| 111 | CPU #0 initialized |
| 112 | CPU_CLUSTER: 0 init finished in 9 msecs |
| 113 | PCI: 00:00.0 init |
| 114 | Assigning IRQ 10 to PCI: 00:01.3 |
| 115 | Assigning IRQ 11 to PCI: 00:03.0 |
| 116 | PCI: 00:00.0 init finished in 4 msecs |
| 117 | PCI: 00:01.0 init |
| 118 | RTC Init |
| 119 | PCI: 00:01.0 init finished in 0 msecs |
| 120 | PCI: 00:01.1 init |
| 121 | IDE: Primary IDE interface: on |
| 122 | IDE: Secondary IDE interface: on |
| 123 | IDE: Access to legacy IDE ports: off |
| 124 | PCI: 00:01.1 init finished in 1 msecs |
| 125 | PCI: 00:02.0 init |
| 126 | PCI: 00:02.0 init finished in 33 msecs |
| 127 | PCI: 00:03.0 init |
| 128 | PCI: 00:03.0 init finished in 0 msecs |
| 129 | Devices initialized |
| 130 | BS: BS_DEV_INIT run times (exec / console): 39 / 18 ms |
| 131 | Finalize devices... |
| 132 | Devices finalized |
| 133 | Copying Interrupt Routing Table to 0x000f0000... done. |
| 134 | Copying Interrupt Routing Table to 0x3ffa1000... done. |
| 135 | PIRQ table: 128 bytes. |
| 136 | QEMU: found ACPI tables in fw_cfg. |
| 137 | QEMU: loading "etc/acpi/rsdp" to 0x3ff7d000 (len 20) |
| 138 | QEMU: loading "etc/acpi/tables" to 0x3ff7d040 (len 131072) |
| 139 | QEMU: loaded ACPI tables from fw_cfg. |
| 140 | Looking on 0x3ff7d000 for valid checksum |
| 141 | Checksum 1 passed |
| 142 | Checksum 2 passed all OK |
| 143 | ACPI: * SSDT |
| 144 | Found 2 CPU(s). |
| 145 | ACPI: added table 4/32, length now 52 |
| 146 | ACPI tables: 131136 bytes. |
| 147 | smbios_write_tables: 3ff7c000 |
| 148 | SMBIOS: Unknown CPU |
| 149 | DOMAIN: 0000 (QEMU Northbridge i440fx) |
| 150 | QEMU: found smbios tables in fw_cfg (len 389). |
| 151 | QEMU: coreboot type0 table found at 0x3ff7c020. |
| 152 | QEMU: loading smbios tables to 0x3ff7c064 |
| 153 | SMBIOS tables: 489 bytes. |
| 154 | Writing table forward entry at 0x00000500 |
| 155 | Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 9fe4 |
| 156 | Writing coreboot table at 0x3ffa2000 |
| 157 | 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 158 | 1. 0000000000001000-000000000009ffff: RAM |
| 159 | 2. 00000000000c0000-000000003ff7bfff: RAM |
| 160 | 3. 000000003ff7c000-000000003ffaafff: CONFIGURATION TABLES |
| 161 | 4. 000000003ffab000-000000003ffd1fff: RAMSTAGE |
| 162 | 5. 000000003ffd2000-000000003fffffff: CONFIGURATION TABLES |
| 163 | 6. 00000000ff800000-00000000ffffffff: RESERVED |
| 164 | FMAP: area COREBOOT found @ 200 (261632 bytes) |
| 165 | CBFS: 'COREBOOT Locator' located CBFS at [200:40000) |
| 166 | Wrote coreboot table at: 0x3ffa2000, 0x28c bytes, checksum 607f |
| 167 | coreboot table: 676 bytes. |
| 168 | IMD ROOT 0. 0x3ffff000 0x00001000 |
| 169 | IMD SMALL 1. 0x3fffe000 0x00001000 |
| 170 | CONSOLE 2. 0x3ffde000 0x00020000 |
| 171 | TIME STAMP 3. 0x3ffdd000 0x00000910 |
| 172 | ROMSTG STCK 4. 0x3ffdc000 0x00001000 |
| 173 | AFTER CAR 5. 0x3ffd2000 0x0000a000 |
| 174 | RAMSTAGE 6. 0x3ffaa000 0x00028000 |
| 175 | COREBOOT 7. 0x3ffa2000 0x00008000 |
| 176 | IRQ TABLE 8. 0x3ffa1000 0x00001000 |
| 177 | ACPI 9. 0x3ff7d000 0x00024000 |
| 178 | SMBIOS 10. 0x3ff7c000 0x00000800 |
| 179 | IMD small region: |
| 180 | IMD ROOT 0. 0x3fffec00 0x00000400 |
| 181 | FMAP 1. 0x3fffeb40 0x000000b6 |
| 182 | BS: BS_WRITE_TABLES run times (exec / console): 4 / 33 ms |
| 183 | FMAP: area COREBOOT found @ 200 (261632 bytes) |
| 184 | CBFS: 'COREBOOT Locator' located CBFS at [200:40000) |
| 185 | CBFS: Locating 'fallback/payload' |
| 186 | CBFS: Found @ offset 180c0 size 10b9e |
| 187 | Checking segment from ROM address 0xfffd82f8 |
| 188 | Checking segment from ROM address 0xfffd8314 |
| 189 | Loading segment from ROM address 0xfffd82f8 |
| 190 | code (compression=1) |
| 191 | New segment dstaddr 0x000e0300 memsize 0x1fd00 srcaddr 0xfffd8330 filesize 0x10b66 |
| 192 | Loading Segment: addr: 0x000e0300 memsz: 0x000000000001fd00 filesz: 0x0000000000010b66 |
| 193 | using LZMA |
| 194 | Loading segment from ROM address 0xfffd8314 |
| 195 | Entry Point 0x000fd262 |
| 196 | BS: BS_PAYLOAD_LOAD run times (exec / console): 7 / 11 ms |
| 197 | Jumping to boot code at 0x000fd262(0x3ffa2000) |
| 198 | SeaBIOS (version rel-1.13.0-0-gf21b5a4) |
| 199 | BUILD: gcc: (Debian 9.2.1-22) 9.2.1 20200104 binutils: (GNU Binutils for Debian) 2.33.1 |
| 200 | Found coreboot cbmem console @ 3ffde000 |
| 201 | Found mainboard Emulation QEMU x86 i440fx/piix4 |
| 202 | Relocating init from 0x000e1a00 to 0x3ff2ec80 (size 53984) |
| 203 | Found CBFS header at 0xfffc0238 |
| 204 | multiboot: eax=3ffc60e0, ebx=1e4 |
| 205 | Found 6 PCI devices (max PCI bus is 00) |
| 206 | Copying SMBIOS entry point from 0x3ff7c000 to 0x000f68e0 |
| 207 | Copying ACPI RSDP from 0x3ff7d000 to 0x000f68c0 |
| 208 | Copying PIR from 0x3ffa1000 to 0x000f6840 |
| 209 | Using pmtimer, ioport 0xe408 |
| 210 | Scan for VGA option rom |
| 211 | Running option rom at c000:0003 |
| 212 | pmm call arg1=0 |
| 213 | Turning on vga text mode console |
| 214 | SeaBIOS (version rel-1.13.0-0-gf21b5a4) |
| 215 | ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9) |
| 216 | ATA controller 2 at 170/374/0 (irq 15 dev 9) |
| 217 | Found 1 lpt ports |
| 218 | Found 1 serial ports |
| 219 | PS2 keyboard initialized |
| 220 | ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (2048 MiBytes) |
| 221 | Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0 |
| 222 | Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@0/disk@0 |
| 223 | DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD] |
| 224 | Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0 |
| 225 | Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0 |
| 226 | All threads complete. |
| 227 | Scan for option roms |
| 228 | Running option rom at ca00:0003 |
| 229 | pmm call arg1=1 |
| 230 | pmm call arg1=0 |
| 231 | pmm call arg1=1 |
| 232 | pmm call arg1=0 |
| 233 | Searching bootorder for: /pci@i0cf8/*@3 |
| 234 | |
| 235 | Press ESC for boot menu. |
| 236 | |
| 237 | Select boot device: |
| 238 | |
| 239 | 1. DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD] |
| 240 | 2. ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (2048 MiBytes) |
| 241 | 3. iPXE (PCI 00:03.0) |
| 242 | |
| 243 | Searching bootorder for: HALT |
| 244 | drive 0x000f67d0: PCHS=4161/16/63 translation=large LCHS=520/128/63 s=4194304 |
| 245 | Space available for UMB: cb000-ed800, f6100-f6770 |
| 246 | Returned 262144 bytes of ZoneHigh |
| 247 | e820 map has 6 items: |
| 248 | 0: 0000000000000000 - 000000000009fc00 = 1 RAM |
| 249 | 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED |
| 250 | 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED |
| 251 | 3: 0000000000100000 - 000000003ff7c000 = 1 RAM |
| 252 | 4: 000000003ff7c000 - 0000000040000000 = 2 RESERVED |
| 253 | 5: 00000000ff800000 - 0000000100000000 = 2 RESERVED |
| 254 | enter handle_19: |
| 255 | NULL |
| 256 | Booting from Hard Disk... |
| 257 | Booting from 0000:7c00 |
| 258 | |