Gitiles
Code Review Sign In
review.coreboot.org / board-status / fca22f4190840f2cee355cdce0c2b30c72a0c70a / . / getac / p470 / 4.8-2482-g78ca711338 / 2018-12-07T11_38_30Z / kernel_log.txt
blob: 3909077108cdf273b513808d291c62f46b263ba4 [file] [log] [blame]
Patrick Georgie3ba5eb2018-12-07 16:03:38 +0100[diff] [blame]1[ 0.000000] Linux version 4.18.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-30)) #1 SMP Debian 4.18.20-2 (2018-11-23)
2[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-3-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet
3[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
4[ 0.000000] BIOS-provided physical RAM map:
5[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
6[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
7[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf312fff] usable
9[ 0.000000] BIOS-e820: [mem 0x00000000bf313000-0x00000000bfffffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
11[ 0.000000] NX (Execute Disable) protection: active
12[ 0.000000] SMBIOS 2.7 present.
13[ 0.000000] DMI: Getac P470/P470, BIOS 4.8-2482-g78ca711338 12/07/2018
14[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
15[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
16[ 0.000000] last_pfn = 0xbf313 max_arch_pfn = 0x400000000
17[ 0.000000] MTRR default type: uncachable
18[ 0.000000] MTRR fixed ranges enabled:
19[ 0.000000] 00000-9FFFF write-back
20[ 0.000000] A0000-BFFFF uncachable
21[ 0.000000] C0000-FFFFF write-back
22[ 0.000000] MTRR variable ranges enabled:
23[ 0.000000] 0 base 000000000 mask F80000000 write-back
24[ 0.000000] 1 base 080000000 mask FC0000000 write-back
25[ 0.000000] 2 base 0BF400000 mask FFFC00000 uncachable
26[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
27[ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining
28[ 0.000000] 5 disabled
29[ 0.000000] 6 disabled
30[ 0.000000] 7 disabled
31[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
32[ 0.000000] found SMP MP-table at [mem 0x000f60a0-0x000f60af] mapped at [(____ptrval____)]
33[ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
34[ 0.000000] BRK [0x59c51000, 0x59c51fff] PGTABLE
35[ 0.000000] BRK [0x59c52000, 0x59c52fff] PGTABLE
36[ 0.000000] BRK [0x59c53000, 0x59c53fff] PGTABLE
37[ 0.000000] BRK [0x59c54000, 0x59c54fff] PGTABLE
38[ 0.000000] BRK [0x59c55000, 0x59c55fff] PGTABLE
39[ 0.000000] BRK [0x59c56000, 0x59c56fff] PGTABLE
40[ 0.000000] RAMDISK: [mem 0x32a1d000-0x35505fff]
41[ 0.000000] ACPI: Early table checksum verification disabled
42[ 0.000000] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4)
43[ 0.000000] ACPI: XSDT 0x00000000BF3140E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
44[ 0.000000] ACPI: FACP 0x00000000BF318010 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000)
45[ 0.000000] ACPI: DSDT 0x00000000BF314280 003D81 (v02 COREv4 COREBOOT 20090419 INTL 20180810)
46[ 0.000000] ACPI: FACS 0x00000000BF314240 000040
47[ 0.000000] ACPI: FACS 0x00000000BF314240 000040
48[ 0.000000] ACPI: SSDT 0x00000000BF318110 000758 (v02 COREv4 COREBOOT 0000002A CORE 0000002A)
49[ 0.000000] ACPI: MCFG 0x00000000BF318870 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
50[ 0.000000] ACPI: APIC 0x00000000BF3188B0 000068 (v02 COREv4 COREBOOT 00000000 CORE 00000000)
51[ 0.000000] ACPI: ECDT 0x00000000BF318920 000054 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
52[ 0.000000] ACPI: HPET 0x00000000BF31A980 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
53[ 0.000000] ACPI: Local APIC address 0xfee00000
54[ 0.000000] No NUMA configuration found
55[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bf312fff]
56[ 0.000000] NODE_DATA(0) allocated [mem 0xbf30e000-0xbf312fff]
57[ 0.000000] tsc: Fast TSC calibration using PIT
58[ 0.000000] Zone ranges:
59[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
60[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000bf312fff]
61[ 0.000000] Normal empty
62[ 0.000000] Device empty
63[ 0.000000] Movable zone start for each node
64[ 0.000000] Early memory node ranges
65[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
66[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf312fff]
67[ 0.000000] Reserved but unavailable: 3407 pages
68[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf312fff]
69[ 0.000000] On node 0 totalpages: 783025
70[ 0.000000] DMA zone: 64 pages used for memmap
71[ 0.000000] DMA zone: 21 pages reserved
72[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
73[ 0.000000] DMA32 zone: 12173 pages used for memmap
74[ 0.000000] DMA32 zone: 779027 pages, LIFO batch:31
75[ 0.000000] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
76[ 0.000000] ACPI: PM-Timer IO Port: 0x508
77[ 0.000000] ACPI: Local APIC address 0xfee00000
78[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
79[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
80[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
81[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
82[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
83[ 0.000000] ACPI: IRQ0 used by override.
84[ 0.000000] ACPI: IRQ9 used by override.
85[ 0.000000] Using ACPI (MADT) for SMP configuration information
86[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
87[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
88[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
89[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
90[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
91[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
92[ 0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
93[ 0.000000] Booting paravirtualized kernel on bare hardware
94[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
95[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0
96[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
97[ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u1048576
98[ 0.000000] pcpu-alloc: s142744 r8192 d29288 u1048576 alloc=1*2097152
99[ 0.000000] pcpu-alloc: [0] 0 1
100[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 770767
101[ 0.000000] Policy zone: DMA32
102[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-3-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet
103[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
104[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
105[ 0.000000] Memory: 3015584K/3132100K available (10252K kernel code, 1227K rwdata, 3256K rodata, 1568K init, 656K bss, 116516K reserved, 0K cma-reserved)
106[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
107[ 0.000000] Kernel/User page tables isolation: enabled
108[ 0.000000] ftrace: allocating 31279 entries in 123 pages
109[ 0.000000] Hierarchical RCU implementation.
110[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
111[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
112[ 0.000000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
113[ 0.000000] Console: colour VGA+ 80x25
114[ 0.000000] console [tty0] enabled
115[ 0.000000] ACPI: Core revision 20180531
116[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
117[ 0.000000] hpet clockevent registered
118[ 0.000000] APIC: Switch to symmetric I/O mode setup
119[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
120[ 0.020000] tsc: Fast TSC calibration using PIT
121[ 0.024000] tsc: Detected 1995.129 MHz processor
122[ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39846a2c531, max_idle_ns: 881590760822 ns
123[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.25 BogoMIPS (lpj=7980516)
124[ 0.024000] pid_max: default: 32768 minimum: 301
125[ 0.024000] Security Framework initialized
126[ 0.024000] Yama: disabled by default; enable with sysctl kernel.yama.*
127[ 0.024000] AppArmor: AppArmor initialized
128[ 0.028327] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
129[ 0.030284] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
130[ 0.030391] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
131[ 0.030457] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
132[ 0.030888] mce: CPU supports 6 MCE banks
133[ 0.030897] CPU0: Thermal monitoring enabled (TM2)
134[ 0.030901] process: using mwait in idle threads
135[ 0.030907] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
136[ 0.030909] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
137[ 0.030912] Spectre V2 : Mitigation: Full generic retpoline
138[ 0.030913] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
139[ 0.030915] Speculative Store Bypass: Vulnerable
140[ 0.031076] Freeing SMP alternatives memory: 24K
141[ 0.036000] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0x6)
142[ 0.036000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
143[ 0.036000] core: PEBS disabled due to CPU errata
144[ 0.036000] ... version: 2
145[ 0.036000] ... bit width: 40
146[ 0.036000] ... generic registers: 2
147[ 0.036000] ... value mask: 000000ffffffffff
148[ 0.036000] ... max period: 000000007fffffff
149[ 0.036000] ... fixed-purpose events: 3
150[ 0.036000] ... event mask: 0000000700000003
151[ 0.036000] Hierarchical SRCU implementation.
152[ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
153[ 0.036000] smp: Bringing up secondary CPUs ...
154[ 0.036000] x86: Booting SMP configuration:
155[ 0.036000] .... node #0, CPUs: #1
156[ 0.036060] smp: Brought up 1 node, 2 CPUs
157[ 0.036060] smpboot: Max logical packages: 1
158[ 0.036060] smpboot: Total of 2 processors activated (7980.51 BogoMIPS)
159[ 0.038294] devtmpfs: initialized
160[ 0.038294] x86/mm: Memory block size: 128MB
161[ 0.040088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
162[ 0.040097] futex hash table entries: 512 (order: 3, 32768 bytes)
163[ 0.040175] pinctrl core: initialized pinctrl subsystem
164[ 0.040443] NET: Registered protocol family 16
165[ 0.040574] audit: initializing netlink subsys (disabled)
166[ 0.040586] audit: type=2000 audit(1544194833.040:1): state=initialized audit_enabled=0 res=1
167[ 0.040586] cpuidle: using governor ladder
168[ 0.040586] cpuidle: using governor menu
169[ 0.040586] ACPI: bus type PCI registered
170[ 0.040586] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
171[ 0.040586] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
172[ 0.040586] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
173[ 0.040586] PCI: Using configuration type 1 for base access
174[ 0.041263] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
175[ 0.041263] ACPI: Added _OSI(Module Device)
176[ 0.041263] ACPI: Added _OSI(Processor Device)
177[ 0.041263] ACPI: Added _OSI(3.0 _SCP Extensions)
178[ 0.041263] ACPI: Added _OSI(Processor Aggregator Device)
179[ 0.041263] ACPI: Added _OSI(Linux-Dell-Video)
180[ 0.041263] ACPI: EC: EC started
181[ 0.041263] ACPI: EC: interrupt blocked
182[ 0.041263] ACPI: \: Used as first EC
183[ 0.041263] ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
184[ 0.041263] ACPI: \: Used as boot ECDT EC to handle transactions
185[ 0.046324] ACPI: 2 ACPI AML tables successfully acquired and loaded
186[ 0.047122] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
187[ 0.047122] ACPI: Interpreter enabled
188[ 0.047122] ACPI: (supports S0 S3 S4 S5)
189[ 0.047122] ACPI: Using IOAPIC for interrupt routing
190[ 0.047122] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
191[ 0.047122] ACPI: Enabled 12 GPEs in block 00 to 1F
192[ 0.308260] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
193[ 0.308267] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
194[ 0.308324] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
195[ 0.308335] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
196[ 0.308398] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
197[ 0.308638] PCI host bridge to bus 0000:00
198[ 0.308641] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
199[ 0.308644] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
200[ 0.308646] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
201[ 0.308648] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
202[ 0.308650] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
203[ 0.308652] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
204[ 0.308654] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
205[ 0.308656] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
206[ 0.308658] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
207[ 0.308660] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
208[ 0.308662] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
209[ 0.308664] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
210[ 0.308666] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
211[ 0.308668] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
212[ 0.308670] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
213[ 0.308672] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
214[ 0.308674] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
215[ 0.308677] pci_bus 0000:00: root bus resource [bus 00-ff]
216[ 0.308689] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
217[ 0.308837] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
218[ 0.308850] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
219[ 0.308857] pci 0000:00:02.0: reg 0x14: [io 0x4090-0x4097]
220[ 0.308863] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
221[ 0.308869] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
222[ 0.309004] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
223[ 0.309016] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
224[ 0.309206] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
225[ 0.309238] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
226[ 0.309350] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
227[ 0.309488] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
228[ 0.309602] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
229[ 0.309742] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
230[ 0.309861] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
231[ 0.310003] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
232[ 0.310114] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
233[ 0.310253] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
234[ 0.310371] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
235[ 0.310515] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
236[ 0.310575] pci 0000:00:1d.0: reg 0x20: [io 0x4000-0x401f]
237[ 0.310712] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
238[ 0.310772] pci 0000:00:1d.1: reg 0x20: [io 0x4020-0x403f]
239[ 0.310914] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
240[ 0.310974] pci 0000:00:1d.2: reg 0x20: [io 0x4040-0x405f]
241[ 0.311113] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
242[ 0.311172] pci 0000:00:1d.3: reg 0x20: [io 0x4060-0x407f]
243[ 0.311325] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
244[ 0.311353] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
245[ 0.311455] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
246[ 0.311576] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
247[ 0.311762] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
248[ 0.311881] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
249[ 0.311887] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
250[ 0.311892] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 02e0 (mask 001f)
251[ 0.311896] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 00ff)
252[ 0.311900] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
253[ 0.312053] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
254[ 0.312078] pci 0000:00:1f.2: reg 0x10: [io 0x4098-0x409f]
255[ 0.312090] pci 0000:00:1f.2: reg 0x14: [io 0x40a8-0x40ab]
256[ 0.312101] pci 0000:00:1f.2: reg 0x18: [io 0x40a0-0x40a7]
257[ 0.312113] pci 0000:00:1f.2: reg 0x1c: [io 0x40ac-0x40af]
258[ 0.312125] pci 0000:00:1f.2: reg 0x20: [io 0x4080-0x408f]
259[ 0.312150] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
260[ 0.312152] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
261[ 0.312154] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
262[ 0.312156] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
263[ 0.312189] pci 0000:00:1f.2: PME# supported from D3hot
264[ 0.312308] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
265[ 0.312387] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
266[ 0.312590] pci 0000:00:1c.0: PCI bridge to [bus 01]
267[ 0.312717] pci 0000:02:00.0: [8086:4222] type 00 class 0x028000
268[ 0.312815] pci 0000:02:00.0: reg 0x10: [mem 0xe4100000-0xe4100fff]
269[ 0.313263] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
270[ 0.313448] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
271[ 0.313476] pci 0000:00:1c.1: PCI bridge to [bus 02]
272[ 0.313484] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
273[ 0.313551] pci 0000:00:1c.2: PCI bridge to [bus 03]
274[ 0.313649] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
275[ 0.313694] pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff]
276[ 0.313736] pci 0000:04:00.0: reg 0x18: [mem 0xe4220000-0xe4220fff 64bit]
277[ 0.313784] pci 0000:04:00.0: reg 0x30: [mem 0xe4200000-0xe421ffff pref]
278[ 0.313798] pci 0000:04:00.0: enabling Extended Tags
279[ 0.313922] pci 0000:04:00.0: supports D1 D2
280[ 0.313924] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
281[ 0.314043] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
282[ 0.314057] pci 0000:00:1c.3: PCI bridge to [bus 04]
283[ 0.314062] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
284[ 0.314067] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff]
285[ 0.314102] pci_bus 0000:05: extended config space not accessible
286[ 0.314204] pci 0000:05:05.0: [104c:8039] type 02 class 0x060700
287[ 0.314230] pci 0000:05:05.0: reg 0x10: [mem 0xe2004000-0xe2004fff]
288[ 0.314276] pci 0000:05:05.0: supports D1 D2
289[ 0.314278] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot D3cold
290[ 0.314380] pci 0000:05:05.1: [104c:803a] type 00 class 0x0c0010
291[ 0.314406] pci 0000:05:05.1: reg 0x10: [mem 0xe2008000-0xe20087ff]
292[ 0.314421] pci 0000:05:05.1: reg 0x14: [mem 0xe0000000-0xe0003fff]
293[ 0.314526] pci 0000:05:05.1: supports D1 D2
294[ 0.314528] pci 0000:05:05.1: PME# supported from D0 D1 D2 D3hot
295[ 0.314616] pci 0000:05:05.2: [104c:803b] type 00 class 0x018000
296[ 0.314641] pci 0000:05:05.2: reg 0x10: [mem 0xe2005000-0xe2005fff]
297[ 0.314754] pci 0000:05:05.2: supports D1 D2
298[ 0.314756] pci 0000:05:05.2: PME# supported from D0 D1 D2 D3hot
299[ 0.314842] pci 0000:05:05.3: [104c:803c] type 00 class 0x080501
300[ 0.314867] pci 0000:05:05.3: reg 0x10: [mem 0xe2009000-0xe20090ff]
301[ 0.314981] pci 0000:05:05.3: supports D1 D2
302[ 0.314983] pci 0000:05:05.3: PME# supported from D0 D1 D2 D3hot
303[ 0.315071] pci 0000:05:05.4: [104c:803d] type 00 class 0x078000
304[ 0.315096] pci 0000:05:05.4: reg 0x10: [mem 0xe2006000-0xe2006fff]
305[ 0.315111] pci 0000:05:05.4: reg 0x14: [mem 0xe2007000-0xe2007fff]
306[ 0.315211] pci 0000:05:05.4: supports D1 D2
307[ 0.315213] pci 0000:05:05.4: PME# supported from D0 D1 D2 D3hot D3cold
308[ 0.315341] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
309[ 0.315346] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff]
310[ 0.315351] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
311[ 0.315359] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
312[ 0.315361] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
313[ 0.315363] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
314[ 0.315366] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
315[ 0.315368] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
316[ 0.315370] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
317[ 0.315372] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
318[ 0.315374] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
319[ 0.315376] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
320[ 0.315378] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
321[ 0.315380] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
322[ 0.315383] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
323[ 0.315388] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
324[ 0.315390] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
325[ 0.315392] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
326[ 0.315394] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
327[ 0.315397] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
328[ 0.315399] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
329[ 0.315435] pci_bus 0000:06: extended config space not accessible
330[ 0.315465] pci_bus 0000:06: busn_res: [bus 06] end can not be updated to 09
331[ 0.315472] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 09
332[ 0.315639] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)
333[ 0.315711] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12 14 15) *10
334[ 0.315780] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15)
335[ 0.315848] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 11 12 14 15) *10
336[ 0.315917] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
337[ 0.315985] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
338[ 0.316060] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15)
339[ 0.316128] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *10
340[ 0.317122] ACPI: EC: interrupt unblocked
341[ 0.317239] ACPI: EC: event unblocked
342[ 0.317248] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
343[ 0.317250] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
344[ 0.317346] pci 0000:00:02.0: vgaarb: setting as boot VGA device
345[ 0.317346] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
346[ 0.317346] pci 0000:00:02.0: vgaarb: bridge control possible
347[ 0.317346] vgaarb: loaded
348[ 0.317346] pps_core: LinuxPPS API ver. 1 registered
349[ 0.317346] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
350[ 0.317346] PTP clock support registered
351[ 0.317346] EDAC MC: Ver: 3.0.0
352[ 0.317346] PCI: Using ACPI for IRQ routing
353[ 0.321655] PCI: pci_cache_line_size set to 64 bytes
354[ 0.321749] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
355[ 0.321751] e820: reserve RAM buffer [mem 0xbf313000-0xbfffffff]
356[ 0.321910] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
357[ 0.321910] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
358[ 0.321910] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
359[ 0.324046] clocksource: Switched to clocksource tsc-early
360[ 0.343558] VFS: Disk quotas dquot_6.6.0
361[ 0.343587] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
362[ 0.343803] AppArmor: AppArmor Filesystem Enabled
363[ 0.343838] pnp: PnP ACPI init
364[ 0.601102] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
365[ 0.601105] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
366[ 0.601108] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
367[ 0.601110] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
368[ 0.601113] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
369[ 0.601115] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
370[ 0.601118] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
371[ 0.601121] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
372[ 0.601129] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
373[ 0.601450] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
374[ 0.601457] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
375[ 0.601540] system 00:02: [io 0x0800-0x080f] has been reserved
376[ 0.601543] system 00:02: [io 0x0500-0x057f] has been reserved
377[ 0.601546] system 00:02: [io 0x0480-0x04bf] has been reserved
378[ 0.601552] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
379[ 0.601586] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
380[ 0.601988] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
381[ 0.602141] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled)
382[ 0.602519] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
383[ 0.602897] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
384[ 0.602944] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
385[ 0.602986] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
386[ 0.603023] pnp: PnP ACPI: found 10 devices
387[ 0.610137] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
388[ 0.610161] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
389[ 0.610165] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
390[ 0.610168] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
391[ 0.610225] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
392[ 0.610237] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
393[ 0.610240] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
394[ 0.610244] pci 0000:00:1c.0: PCI bridge to [bus 01]
395[ 0.610248] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
396[ 0.610254] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
397[ 0.610259] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
398[ 0.610267] pci 0000:00:1c.1: PCI bridge to [bus 02]
399[ 0.610273] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
400[ 0.610285] pci 0000:00:1c.2: PCI bridge to [bus 03]
401[ 0.610300] pci 0000:00:1c.3: PCI bridge to [bus 04]
402[ 0.610304] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
403[ 0.610310] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff]
404[ 0.610329] pci 0000:05:05.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
405[ 0.610335] pci 0000:05:05.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
406[ 0.610338] pci 0000:05:05.0: BAR 13: assigned [io 0x1000-0x10ff]
407[ 0.610340] pci 0000:05:05.0: BAR 14: assigned [io 0x1400-0x14ff]
408[ 0.610343] pci 0000:05:05.0: CardBus bridge to [bus 06]
409[ 0.610345] pci 0000:05:05.0: bridge window [io 0x1000-0x10ff]
410[ 0.610350] pci 0000:05:05.0: bridge window [io 0x1400-0x14ff]
411[ 0.610356] pci 0000:05:05.0: bridge window [mem 0xc4000000-0xc7ffffff pref]
412[ 0.610361] pci 0000:05:05.0: bridge window [mem 0xc8000000-0xcbffffff]
413[ 0.610367] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
414[ 0.610371] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff]
415[ 0.610377] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
416[ 0.610382] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
417[ 0.610390] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
418[ 0.610392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
419[ 0.610395] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
420[ 0.610397] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
421[ 0.610399] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
422[ 0.610401] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
423[ 0.610403] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
424[ 0.610405] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
425[ 0.610407] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
426[ 0.610409] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
427[ 0.610411] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
428[ 0.610413] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
429[ 0.610416] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
430[ 0.610418] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
431[ 0.610420] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
432[ 0.610422] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff window]
433[ 0.610424] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
434[ 0.610426] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
435[ 0.610428] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff]
436[ 0.610430] pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
437[ 0.610432] pci_bus 0000:02: resource 1 [mem 0xe4100000-0xe41fffff]
438[ 0.610435] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
439[ 0.610437] pci_bus 0000:04: resource 1 [mem 0xe4200000-0xe42fffff]
440[ 0.610439] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
441[ 0.610441] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
442[ 0.610443] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
443[ 0.610445] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
444[ 0.610447] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
445[ 0.610449] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
446[ 0.610451] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
447[ 0.610453] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
448[ 0.610455] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
449[ 0.610458] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
450[ 0.610460] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
451[ 0.610462] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
452[ 0.610464] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
453[ 0.610466] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
454[ 0.610468] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
455[ 0.610470] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
456[ 0.610472] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
457[ 0.610474] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
458[ 0.610476] pci_bus 0000:05: resource 19 [mem 0xc0000000-0xfebfffff window]
459[ 0.610478] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
460[ 0.610480] pci_bus 0000:06: resource 0 [io 0x1000-0x10ff]
461[ 0.610482] pci_bus 0000:06: resource 1 [io 0x1400-0x14ff]
462[ 0.610484] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc7ffffff pref]
463[ 0.610486] pci_bus 0000:06: resource 3 [mem 0xc8000000-0xcbffffff]
464[ 0.610592] NET: Registered protocol family 2
465[ 0.610828] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
466[ 0.610865] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
467[ 0.611036] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
468[ 0.611317] TCP: Hash tables configured (established 32768 bind 32768)
469[ 0.611398] UDP hash table entries: 2048 (order: 4, 65536 bytes)
470[ 0.611438] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
471[ 0.611525] NET: Registered protocol family 1
472[ 0.611547] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
473[ 0.612573] PCI: CLS 64 bytes, default 64
474[ 0.612639] Unpacking initramfs...
475[ 1.602736] Freeing initrd memory: 43940K
476[ 1.604071] Initialise system trusted keyrings
477[ 1.604183] workingset: timestamp_bits=40 max_order=20 bucket_order=0
478[ 1.606648] zbud: loaded
479[ 1.607011] pstore: using deflate compression
480[ 2.171870] Key type asymmetric registered
481[ 2.171875] Asymmetric key parser 'x509' registered
482[ 2.171936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
483[ 2.171981] io scheduler noop registered
484[ 2.171982] io scheduler deadline registered
485[ 2.172038] io scheduler cfq registered (default)
486[ 2.172040] io scheduler mq-deadline registered
487[ 2.172226] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
488[ 2.173237] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
489[ 2.173269] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
490[ 2.173301] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
491[ 2.173334] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
492[ 2.173365] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
493[ 2.173421] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
494[ 2.173444] intel_idle: does not run on family 6 model 15
495[ 2.173621] Monitor-Mwait will be used to enter C-1 state
496[ 2.173631] tsc: Marking TSC unstable due to TSC halts in idle
497[ 2.173833] clocksource: Switched to clocksource hpet
498[ 2.174092] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
499[ 2.174238] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a TI16750
500[ 2.174399] serial 00:05: [io 0x02f8-0x02ff]
501[ 2.174470] serial 00:05: [irq 3]
502[ 2.175152] serial 00:05: activated
503[ 2.195810] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
504[ 2.216606] 00:06: ttyS2 at I/O 0x3e8 (irq = 5, base_baud = 115200) is a 16550A
505[ 2.237371] 00:07: ttyS3 at I/O 0x2e8 (irq = 5, base_baud = 115200) is a 16550A
506[ 2.237791] Linux agpgart interface v0.103
507[ 2.237947] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
508[ 2.237948] AMD IOMMUv2 functionality not available on this system
509[ 2.238228] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
510[ 2.240479] i8042: Detected active multiplexing controller, rev 1.1
511[ 2.241698] serio: i8042 KBD port at 0x60,0x64 irq 1
512[ 2.241704] serio: i8042 AUX0 port at 0x60,0x64 irq 12
513[ 2.241747] serio: i8042 AUX1 port at 0x60,0x64 irq 12
514[ 2.241785] serio: i8042 AUX2 port at 0x60,0x64 irq 12
515[ 2.241822] serio: i8042 AUX3 port at 0x60,0x64 irq 12
516[ 2.242019] mousedev: PS/2 mouse device common for all mice
517[ 2.242082] rtc_cmos 00:03: RTC can wake from S4
518[ 2.242292] rtc_cmos 00:03: registered as rtc0
519[ 2.242318] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
520[ 2.242369] ledtrig-cpu: registered to indicate activity on CPUs
521[ 2.242791] NET: Registered protocol family 10
522[ 2.249161] Segment Routing with IPv6
523[ 2.249194] mip6: Mobile IPv6
524[ 2.249198] NET: Registered protocol family 17
525[ 2.249205] mpls_gso: MPLS GSO support
526[ 2.249434] microcode: sig=0x6f6, pf=0x20, revision=0xd1
527[ 2.249525] microcode: Microcode Update Driver: v2.2.
528[ 2.249780] registered taskstats version 1
529[ 2.249782] Loading compiled-in X.509 certificates
530[ 2.266834] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
531[ 2.323542] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
532[ 2.323572] zswap: loaded using pool lzo/zbud
533[ 2.323781] AppArmor: AppArmor sha1 policy hashing enabled
534[ 2.324343] rtc_cmos 00:03: setting system clock to 2018-12-07 15:00:36 UTC (1544194836)
535[ 2.324377] Unstable clock detected, switching default tracing clock to "global"
536 If you want to keep using the local clock, then add:
537 "trace_clock=local"
538 on the kernel command line
539[ 2.327959] Freeing unused kernel image memory: 1568K
540[ 2.344065] Write protecting the kernel read-only data: 16384k
541[ 2.345461] Freeing unused kernel image memory: 2028K
542[ 2.346051] Freeing unused kernel image memory: 840K
543[ 2.358526] x86/mm: Checked W+X mappings: passed, no W+X pages found.
544[ 2.358527] x86/mm: Checking user space page tables
545[ 2.372458] x86/mm: Checked W+X mappings: passed, no W+X pages found.
546[ 2.479720] input: Lid Switch as /devices/LNXSYSTM:00/PNP0C0D:00/input/input4
547[ 2.479734] ACPI: Lid Switch [LID0]
548[ 2.488179] input: Sleep Button as /devices/LNXSYSTM:00/PNP0C0E:00/input/input5
549[ 2.488197] ACPI: Sleep Button [SLPB]
550[ 2.488276] input: Power Button as /devices/LNXSYSTM:00/PNP0C0C:00/input/input6
551[ 2.488300] ACPI: Power Button [PWRB]
552[ 2.488367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
553[ 2.488380] ACPI: Power Button [PWRF]
554[ 2.525414] ACPI: Invalid active0 threshold
555[ 2.536097] thermal LNXTHERM:00: registered as thermal_zone0
556[ 2.536100] ACPI: Thermal Zone [THRM] (41 C)
557[ 2.549588] pci 0000:00:00.0: Intel 945GM Chipset
558[ 2.549603] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
559[ 2.550762] pci 0000:00:00.0: detected 8192K stolen memory
560[ 2.550802] [drm] Replacing VGA console driver
561[ 2.551496] Console: switching to colour dummy device 80x25
562[ 2.551646] ACPI: bus type USB registered
563[ 2.551688] usbcore: registered new interface driver usbfs
564[ 2.551702] usbcore: registered new interface driver hub
565[ 2.552446] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
566[ 2.552834] usbcore: registered new device driver usb
567[ 2.554870] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
568[ 2.555057] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
569[ 2.555147] ehci-pci: EHCI PCI platform driver
570[ 2.555311] ehci-pci 0000:00:1d.7: EHCI Host Controller
571[ 2.555321] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
572[ 2.555340] ehci-pci 0000:00:1d.7: debug port 1
573[ 2.558836] uhci_hcd: USB Universal Host Controller Interface driver
574[ 2.559265] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
575[ 2.563133] sdhci: Secure Digital Host Controller Interface driver
576[ 2.563134] sdhci: Copyright(c) Pierre Ossman
577[ 2.563376] r8169 0000:04:00.0 eth0: RTL8168b/8111b, 00:40:d0:e4:58:4b, XID 38000000, IRQ 28
578[ 2.563379] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
579[ 2.563414] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe4444000
580[ 2.564856] sdhci-pci 0000:05:05.3: SDHCI controller found [104c:803c] (rev 0)
581[ 2.564990] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
582[ 2.569723] SCSI subsystem initialized
583[ 2.570819] mmc0: SDHCI controller on PCI [0000:05:05.3] using DMA
584[ 2.576629] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
585[ 2.576744] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
586[ 2.576747] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
587[ 2.576749] usb usb1: Product: EHCI Host Controller
588[ 2.576751] usb usb1: Manufacturer: Linux 4.18.0-3-amd64 ehci_hcd
589[ 2.576753] usb usb1: SerialNumber: 0000:00:1d.7
590[ 2.576952] hub 1-0:1.0: USB hub found
591[ 2.576964] hub 1-0:1.0: 8 ports detected
592[ 2.577402] uhci_hcd 0000:00:1d.0: UHCI Host Controller
593[ 2.577412] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
594[ 2.577423] uhci_hcd 0000:00:1d.0: detected 2 ports
595[ 2.577451] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004000
596[ 2.577538] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
597[ 2.577540] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
598[ 2.577543] usb usb2: Product: UHCI Host Controller
599[ 2.577545] usb usb2: Manufacturer: Linux 4.18.0-3-amd64 uhci_hcd
600[ 2.577547] usb usb2: SerialNumber: 0000:00:1d.0
601[ 2.577743] hub 2-0:1.0: USB hub found
602[ 2.577754] hub 2-0:1.0: 2 ports detected
603[ 2.578094] uhci_hcd 0000:00:1d.1: UHCI Host Controller
604[ 2.578104] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
605[ 2.578112] uhci_hcd 0000:00:1d.1: detected 2 ports
606[ 2.578136] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004020
607[ 2.578217] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
608[ 2.578220] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
609[ 2.578222] usb usb3: Product: UHCI Host Controller
610[ 2.578224] usb usb3: Manufacturer: Linux 4.18.0-3-amd64 uhci_hcd
611[ 2.578226] usb usb3: SerialNumber: 0000:00:1d.1
612[ 2.578796] hub 3-0:1.0: USB hub found
613[ 2.578807] hub 3-0:1.0: 2 ports detected
614[ 2.579081] uhci_hcd 0000:00:1d.2: UHCI Host Controller
615[ 2.579090] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
616[ 2.579098] uhci_hcd 0000:00:1d.2: detected 2 ports
617[ 2.579140] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
618[ 2.579218] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
619[ 2.579220] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
620[ 2.579222] usb usb4: Product: UHCI Host Controller
621[ 2.579224] usb usb4: Manufacturer: Linux 4.18.0-3-amd64 uhci_hcd
622[ 2.579226] usb usb4: SerialNumber: 0000:00:1d.2
623[ 2.579391] libata version 3.00 loaded.
624[ 2.579601] hub 4-0:1.0: USB hub found
625[ 2.579612] hub 4-0:1.0: 2 ports detected
626[ 2.579886] uhci_hcd 0000:00:1d.3: UHCI Host Controller
627[ 2.579895] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
628[ 2.579903] uhci_hcd 0000:00:1d.3: detected 2 ports
629[ 2.579927] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004060
630[ 2.579943] ata_piix 0000:00:1f.2: version 2.13
631[ 2.580050] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
632[ 2.580052] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
633[ 2.580054] usb usb5: Product: UHCI Host Controller
634[ 2.580057] usb usb5: Manufacturer: Linux 4.18.0-3-amd64 uhci_hcd
635[ 2.580059] usb usb5: SerialNumber: 0000:00:1d.3
636[ 2.580072] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
637[ 2.580652] hub 5-0:1.0: USB hub found
638[ 2.580663] hub 5-0:1.0: 2 ports detected
639[ 2.580815] scsi host0: ata_piix
640[ 2.581108] scsi host1: ata_piix
641[ 2.581178] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4080 irq 14
642[ 2.581180] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4088 irq 15
643[ 2.602734] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
644[ 2.602736] [drm] Driver supports precise vblank timestamp query.
645[ 2.603083] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
646[ 2.624520] [drm] RC6 disabled, disabling runtime PM support
647[ 2.624583] [drm] initialized overlay support
648[ 2.625001] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
649[ 2.625222] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
650[ 2.625558] acpi device:03: registered as cooling_device2
651[ 2.625636] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
652[ 2.636105] firewire_ohci 0000:05:05.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
653[ 2.643741] fbcon: inteldrmfb (fb0) is primary device
654[ 2.699084] Console: switching to colour frame buffer device 160x50
655[ 2.718912] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
656[ 2.742976] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33
657[ 2.743163] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
658[ 2.743166] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
659[ 2.747637] random: fast init done
660[ 2.748484] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0012 PQ: 0 ANSI: 5
661[ 2.750580] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.60 PQ: 0 ANSI: 5
662[ 2.782067] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
663[ 2.782080] sd 0:0:0:0: [sda] Write Protect is off
664[ 2.782082] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
665[ 2.782099] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
666[ 2.805827] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
667[ 2.805830] cdrom: Uniform CD-ROM driver Revision: 3.20
668[ 2.806077] sr 1:0:0:0: Attached scsi CD-ROM sr0
669[ 2.838184] sda: sda1 sda2 < sda5 >
670[ 2.838678] sd 0:0:0:0: [sda] Attached SCSI disk
671[ 3.116057] usb 4-1: new full-speed USB device number 2 using uhci_hcd
672[ 3.168167] firewire_core 0000:05:05.1: created device fw0: GUID 0040d00100437d35, S400
673[ 3.311857] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 50149
674[ 3.321159] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=19.58
675[ 3.321162] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
676[ 3.348735] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
677[ 3.460027] raid6: sse2x1 gen() 2853 MB/s
678[ 3.528024] raid6: sse2x1 xor() 3394 MB/s
679[ 3.596036] raid6: sse2x2 gen() 3603 MB/s
680[ 3.664023] raid6: sse2x2 xor() 4104 MB/s
681[ 3.732028] raid6: sse2x4 gen() 6116 MB/s
682[ 3.800022] raid6: sse2x4 xor() 4511 MB/s
683[ 3.800024] raid6: using algorithm sse2x4 gen() 6116 MB/s
684[ 3.800025] raid6: .... xor() 4511 MB/s, rmw enabled
685[ 3.800026] raid6: using ssse3x2 recovery algorithm
686[ 3.804251] xor: measuring software checksum speed
687[ 3.844021] prefetch64-sse: 7676.000 MB/sec
688[ 3.884019] generic_sse: 6831.000 MB/sec
689[ 3.884021] xor: using function: prefetch64-sse (7676.000 MB/sec)
690[ 3.954770] Btrfs loaded, crc32c=crc32c-generic
691[ 4.122613] BTRFS: device fsid 749a2872-dfdf-4601-a982-fedcd6f615c4 devid 1 transid 117120 /dev/sda1
692[ 4.148031] usb 4-2: new full-speed USB device number 3 using uhci_hcd
693[ 4.150908] PM: Image not found (code -22)
694[ 4.231894] BTRFS info (device sda1): disk space caching is enabled
695[ 4.341156] usb 4-2: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.01
696[ 4.341159] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
697[ 4.341161] usb 4-2: Product: Fingerprint Sensor
698[ 4.341163] usb 4-2: Manufacturer: TouchStrip
699[ 4.716039] usb 1-7: new high-speed USB device number 4 using ehci-pci
700[ 4.873475] usb 1-7: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 7.02
701[ 4.873479] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
702[ 4.873481] usb 1-7: Product: USB2.0 Hub
703[ 4.873887] hub 1-7:1.0: USB hub found
704[ 4.874218] hub 1-7:1.0: 4 ports detected
705[ 6.927962] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
706[ 6.948140] systemd[1]: Detected architecture x86-64.
707[ 6.973736] systemd[1]: Set hostname to <t-rex>.
708[ 9.287788] random: systemd: uninitialized urandom read (16 bytes read)
709[ 9.287915] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
710[ 9.287976] random: systemd: uninitialized urandom read (16 bytes read)
711[ 9.288082] systemd[1]: Listening on initctl Compatibility Named Pipe.
712[ 9.288222] random: systemd: uninitialized urandom read (16 bytes read)
713[ 9.288397] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
714[ 9.288540] systemd[1]: Listening on udev Kernel Socket.
715[ 9.288578] systemd[1]: Reached target User and Group Name Lookups.
716[ 9.300450] systemd[1]: Listening on Syslog Socket.
717[ 9.300592] systemd[1]: Listening on udev Control Socket.
718[ 9.868607] BTRFS info (device sda1): disk space caching is enabled
719[ 9.926402] lp: driver loaded but no devices found
720[ 10.160211] ppdev: user-space parallel port driver
721[ 10.162911] systemd-journald[258]: Received request to flush runtime journal from PID 1
722[ 10.211773] RPC: Registered named UNIX socket transport module.
723[ 10.211774] RPC: Registered udp transport module.
724[ 10.211775] RPC: Registered tcp transport module.
725[ 10.211776] RPC: Registered tcp NFSv4.1 backchannel transport module.
726[ 13.025170] audit: type=1400 audit(1544194847.196:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=304 comm="apparmor_parser"
727[ 13.025175] audit: type=1400 audit(1544194847.196:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=304 comm="apparmor_parser"
728[ 13.025180] audit: type=1400 audit(1544194847.196:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=304 comm="apparmor_parser"
729[ 13.091776] audit: type=1400 audit(1544194847.260:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=305 comm="apparmor_parser"
730[ 13.158553] audit: type=1400 audit(1544194847.328:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=306 comm="apparmor_parser"
731[ 13.213825] audit: type=1400 audit(1544194847.384:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=303 comm="apparmor_parser"
732[ 13.213831] audit: type=1400 audit(1544194847.384:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=303 comm="apparmor_parser"
733[ 13.213835] audit: type=1400 audit(1544194847.384:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=303 comm="apparmor_parser"
734[ 13.213838] audit: type=1400 audit(1544194847.384:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=303 comm="apparmor_parser"
735[ 13.213842] audit: type=1400 audit(1544194847.384:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=303 comm="apparmor_parser"
736[ 14.280135] ACPI: AC Adapter [AC] (on-line)
737[ 14.465477] ACPI: Battery Slot [BAT0] (battery present)
738[ 14.596414] ACPI: Battery Slot [BAT1] (battery absent)
739[ 14.660270] intel_rng: FWH not detected
740[ 14.776416] sd 0:0:0:0: Attached scsi generic sg0 type 0
741[ 14.776531] sr 1:0:0:0: Attached scsi generic sg1 type 5
742[ 14.984697] leds_ss4200: no LED devices found
743[ 14.996664] input: PC Speaker as /devices/platform/pcspkr/input/input14
744[ 15.025325] yenta_cardbus 0000:05:05.0: CardBus bridge found [104c:ac48]
745[ 15.025345] yenta_cardbus 0000:05:05.0: Enabling burst memory read transactions
746[ 15.025351] yenta_cardbus 0000:05:05.0: Using CSCINT to route CSC interrupts to PCI
747[ 15.025353] yenta_cardbus 0000:05:05.0: Routing CardBus interrupts to PCI
748[ 15.025359] yenta_cardbus 0000:05:05.0: TI: mfunc 0x01aa1b22, devctl 0x64
749[ 15.225706] iTCO_vendor_support: vendor-support=0
750[ 15.268816] yenta_cardbus 0000:05:05.0: ISA IRQ mask 0x0ce8, PCI irq 16
751[ 15.268820] yenta_cardbus 0000:05:05.0: Socket status: 30000006
752[ 15.268828] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [io 0x1000-0x2fff]
753[ 15.268831] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
754[ 15.268834] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
755[ 15.268838] excluding 0xe0000000-0xe020ffff 0xe1ef0000-0xe20fffff
756[ 15.268849] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
757[ 15.268852] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
758[ 15.268856] excluding 0xe2100000-0xe40fffff
759[ 15.462556] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
760[ 15.462643] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0560)
761[ 15.462784] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
762[ 16.211522] Bluetooth: Core ver 2.22
763[ 16.211559] NET: Registered protocol family 31
764[ 16.211561] Bluetooth: HCI device and connection manager initialized
765[ 16.211570] Bluetooth: HCI socket layer initialized
766[ 16.211574] Bluetooth: L2CAP socket layer initialized
767[ 16.211585] Bluetooth: SCO socket layer initialized
768[ 16.947153] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
769[ 16.947154] iwl3945: Copyright(c) 2003-2011 Intel Corporation
770[ 16.947155] iwl3945: hw_scan is disabled
771[ 17.001081] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
772[ 17.001084] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
773[ 17.076165] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
774[ 17.223452] intel_powerclamp: No package C-state available
775[ 17.296610] usbcore: registered new interface driver btusb
776[ 17.432650] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
777[ 17.432660] excluding 0xc4000-0xc7fff 0xf0000-0xfffff
778[ 17.432705] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
779[ 17.432729] excluding 0xa0000000-0xa0ffffff
780[ 17.432758] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
781[ 17.432782] excluding 0x60000000-0x60ffffff
782[ 17.622673] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
783[ 17.623084] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
784[ 17.623087] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
785[ 17.623089] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
786[ 17.623091] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
787[ 17.623093] snd_hda_codec_realtek hdaudioC0D0: inputs:
788[ 17.623096] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
789[ 17.623099] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x1a
790[ 17.623101] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
791[ 17.830509] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
792[ 17.830831] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
793[ 17.830910] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
794[ 17.830990] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
795[ 17.831072] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
796[ 17.906296] Adding 4789244k swap on /dev/sda5. Priority:-2 extents:1 across:4789244k FS
797[ 23.612326] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
798[ 23.612328] Bluetooth: BNEP filters: protocol multicast
799[ 23.612336] Bluetooth: BNEP socket layer initialized
800[ 26.778451] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
801[ 26.816110] r8169 0000:04:00.0 eth0: link down
802[ 26.816190] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
803[ 26.835282] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
804[ 27.089075] iwl3945 0000:02:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode
805[ 27.089085] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
806[ 27.166705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
807[ 27.245055] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
808[ 36.838473] fuse init (API version 7.27)
809[ 44.243542] random: crng init done
810[ 44.243545] random: 7 urandom warning(s) missed due to ratelimiting
811[ 44.255285] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
812[ 47.719577] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
813[ 51.117287] wlan0: authenticate with 70:3a:cb:bd:fd:e3
814[ 51.122109] wlan0: send auth to 70:3a:cb:bd:fd:e3 (try 1/3)
815[ 51.123443] wlan0: authenticated
816[ 51.128038] wlan0: associate with 70:3a:cb:bd:fd:e3 (try 1/3)
817[ 51.133385] wlan0: RX AssocResp from 70:3a:cb:bd:fd:e3 (capab=0x1011 status=0 aid=4)
818[ 51.136351] wlan0: associated
819[ 51.232870] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
820[ 51.233272] iwl3945 0000:02:00.0: Enabling power save might cause firmware crashes
821[ 51.233336] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 70:3a:cb:bd:fd:e3
822[ 56.909767] rfkill: input handler disabled
823[ 60.524068] Bluetooth: RFCOMM TTY layer initialized
824[ 60.524077] Bluetooth: RFCOMM socket layer initialized
825[ 60.524089] Bluetooth: RFCOMM ver 1.11