blob: bb8bbac2718c802c3175312406f6830834e8ce70 [file] [log] [blame]
Vladimir Serbinenkod5f1cc22014-02-27 13:24:24 +01001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.4-1 (2014-02-22)
5[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
8[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
9[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
11[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
13[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acecffff] usable
15[ 0.000000] BIOS-e820: [mem 0x00000000aced0000-0x00000000acffffff] type 16
16[ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044e5fffff] usable
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: LENOVO 2325TLU, BIOS 4.0-5575-g4a082c6 02/27/2014
22[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24[ 0.000000] No AGP bridge found
25[ 0.000000] e820: last_pfn = 0x44e600 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: write-back
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-FFFFF write-back
31[ 0.000000] MTRR variable ranges enabled:
32[ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable
33[ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable
34[ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
35[ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable
36[ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining
37[ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
38[ 0.000000] 6 disabled
39[ 0.000000] 7 disabled
40[ 0.000000] 8 disabled
41[ 0.000000] 9 disabled
42[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
43[ 0.000000] e820: last_pfn = 0xaced0 max_arch_pfn = 0x400000000
44[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
45[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
46[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
47[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
48[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
49[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
50[ 0.000000] init_memory_mapping: [mem 0x44e400000-0x44e5fffff]
51[ 0.000000] [mem 0x44e400000-0x44e5fffff] page 2M
52[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
53[ 0.000000] init_memory_mapping: [mem 0x44c000000-0x44e3fffff]
54[ 0.000000] [mem 0x44c000000-0x44e3fffff] page 2M
55[ 0.000000] init_memory_mapping: [mem 0x400000000-0x44bffffff]
56[ 0.000000] [mem 0x400000000-0x44bffffff] page 2M
57[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
58[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
59[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
60[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
61[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
62[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
63[ 0.000000] init_memory_mapping: [mem 0x40200000-0xacecffff]
64[ 0.000000] [mem 0x40200000-0xacdfffff] page 2M
65[ 0.000000] [mem 0xace00000-0xacecffff] page 4k
66[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
67[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
68[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
69[ 0.000000] RAMDISK: [mem 0x360a0000-0x37047fff]
70[ 0.000000] ACPI: RSDP 00000000000f0000 000024 (v02 CORE )
71[ 0.000000] ACPI: XSDT 00000000acee16e0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: FACP 00000000acee4d70 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
73[ 0.000000] ACPI: DSDT 00000000acee1850 00351A (v02 COREv4 COREBOOT 20110725 INTL 20140114)
74[ 0.000000] ACPI: FACS 00000000acee1810 000040
75[ 0.000000] ACPI: HPET 00000000acee4e70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
76[ 0.000000] ACPI: APIC 00000000acee4eb0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
77[ 0.000000] ACPI: MCFG 00000000acee4f20 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
78[ 0.000000] ACPI: SSDT 00000000acee5e20 00122C (v02 CORE COREBOOT 0000002A CORE 0000002A)
79[ 0.000000] ACPI: Local APIC address 0xfee00000
80[ 0.000000] No NUMA configuration found
81[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000044e5fffff]
82[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x44e5fffff]
83[ 0.000000] NODE_DATA [mem 0x44e5ed000-0x44e5f1fff]
84[ 0.000000] [ffffea0000000000-ffffea000f1fffff] PMD -> [ffff88043dc00000-ffff88044bdfffff] on node 0
85[ 0.000000] Zone ranges:
86[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
87[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
88[ 0.000000] Normal [mem 0x100000000-0x44e5fffff]
89[ 0.000000] Movable zone start for each node
90[ 0.000000] Early memory node ranges
91[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
92[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
93[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
94[ 0.000000] node 0: [mem 0x40200000-0xacecffff]
95[ 0.000000] node 0: [mem 0x100000000-0x44e5fffff]
96[ 0.000000] On node 0 totalpages: 4173935
97[ 0.000000] DMA zone: 56 pages used for memmap
98[ 0.000000] DMA zone: 22 pages reserved
99[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
100[ 0.000000] DMA32 zone: 9614 pages used for memmap
101[ 0.000000] DMA32 zone: 703184 pages, LIFO batch:31
102[ 0.000000] Normal zone: 47397 pages used for memmap
103[ 0.000000] Normal zone: 3466752 pages, LIFO batch:31
104[ 0.000000] ACPI: PM-Timer IO Port: 0x508
105[ 0.000000] ACPI: Local APIC address 0xfee00000
106[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
107[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
108[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
109[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
110[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
111[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
112[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
113[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
114[ 0.000000] ACPI: IRQ0 used by override.
115[ 0.000000] ACPI: IRQ2 used by override.
116[ 0.000000] ACPI: IRQ9 used by override.
117[ 0.000000] Using ACPI (MADT) for SMP configuration information
118[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
119[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
120[ 0.000000] nr_irqs_gsi: 40
121[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
122[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
124[ 0.000000] PM: Registered nosave memory: [mem 0xaced0000-0xacffffff]
125[ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
127[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
129[ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
130[ 0.000000] Booting paravirtualized kernel on bare hardware
131[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
132[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88044e200000 s85824 r8192 d20672 u524288
133[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u524288 alloc=1*2097152
134[ 0.000000] pcpu-alloc: [0] 0 1 2 3
135[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116846
136[ 0.000000] Policy zone: Normal
137[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
138[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
139[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
140[ 0.000000] Checking aperture...
141[ 0.000000] No AGP bridge found
142[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
143[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
144[ 0.000000] Memory: 16370480K/16695740K available (4806K kernel code, 693K rwdata, 1620K rodata, 988K init, 952K bss, 325260K reserved)
145[ 0.000000] Hierarchical RCU implementation.
146[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
147[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
148[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
149[ 0.000000] Console: colour VGA+ 80x25
150[ 0.000000] console [tty0] enabled
151[ 0.000000] hpet clockevent registered
152[ 0.000000] tsc: Fast TSC calibration using PIT
153[ 0.004000] tsc: Detected 2793.532 MHz processor
154[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.06 BogoMIPS (lpj=11174128)
155[ 0.000004] pid_max: default: 32768 minimum: 301
156[ 0.000023] Security Framework initialized
157[ 0.000026] AppArmor: AppArmor disabled by boot time parameter
158[ 0.000027] Yama: disabled by default; enable with sysctl kernel.yama.*
159[ 0.000781] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
160[ 0.004300] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
161[ 0.005888] Mount-cache hash table entries: 256
162[ 0.006024] Initializing cgroup subsys memory
163[ 0.006028] Initializing cgroup subsys devices
164[ 0.006029] Initializing cgroup subsys freezer
165[ 0.006030] Initializing cgroup subsys blkio
166[ 0.006032] Initializing cgroup subsys perf_event
167[ 0.006051] CPU: Physical Processor ID: 0
168[ 0.006052] CPU: Processor Core ID: 0
169[ 0.006373] mce: CPU supports 7 MCE banks
170[ 0.006384] CPU0: Thermal monitoring enabled (TM1)
171[ 0.006392] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
172[ 0.006392] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
173[ 0.006392] tlb_flushall_shift: 2
174[ 0.006481] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
175[ 0.007380] ACPI: Core revision 20131115
176[ 0.009001] ACPI: All ACPI Tables successfully acquired
177[ 0.009674] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
178[ 0.049405] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
179[ 0.049411] TSC deadline timer enabled
180[ 0.049418] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
181[ 0.049423] ... version: 3
182[ 0.049424] ... bit width: 48
183[ 0.049425] ... generic registers: 4
184[ 0.049426] ... value mask: 0000ffffffffffff
185[ 0.049426] ... max period: 0000ffffffffffff
186[ 0.049427] ... fixed-purpose events: 3
187[ 0.049428] ... event mask: 000000070000000f
188[ 0.049629] x86: Booting SMP configuration:
189[ 0.063136] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
190[ 0.049630] .... node #0, CPUs: #1 #2 #3
191[ 0.090218] x86: Booted up 1 node, 4 CPUs
192[ 0.090220] smpboot: Total of 4 processors activated (22348.25 BogoMIPS)
193[ 0.093002] devtmpfs: initialized
194[ 0.095807] NET: Registered protocol family 16
195[ 0.095873] cpuidle: using governor ladder
196[ 0.095875] cpuidle: using governor menu
197[ 0.095894] ACPI: bus type PCI registered
198[ 0.095895] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
199[ 0.095949] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
200[ 0.095951] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
201[ 0.099641] PCI: Using configuration type 1 for base access
202[ 0.100180] bio: create slab <bio-0> at 0
203[ 0.100264] ACPI: Added _OSI(Module Device)
204[ 0.100266] ACPI: Added _OSI(Processor Device)
205[ 0.100267] ACPI: Added _OSI(3.0 _SCP Extensions)
206[ 0.100268] ACPI: Added _OSI(Processor Aggregator Device)
207[ 0.102451] ACPI: Interpreter enabled
208[ 0.102455] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
209[ 0.102459] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
210[ 0.102468] ACPI: (supports S0 S3 S4 S5)
211[ 0.102469] ACPI: Using IOAPIC for interrupt routing
212[ 0.102487] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
213[ 0.102559] ACPI: No dock devices found.
214[ 0.106262] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
215[ 0.106267] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
216[ 0.106305] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
217[ 0.106378] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
218[ 0.106496] PCI host bridge to bus 0000:00
219[ 0.106498] pci_bus 0000:00: root bus resource [bus 00-ff]
220[ 0.106500] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
221[ 0.106501] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
222[ 0.106503] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
223[ 0.106504] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
224[ 0.106505] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
225[ 0.106506] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
226[ 0.106508] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
227[ 0.106509] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
228[ 0.106510] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
229[ 0.106512] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
230[ 0.106513] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
231[ 0.106515] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
232[ 0.106516] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
233[ 0.106517] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
234[ 0.106518] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
235[ 0.106520] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
236[ 0.106521] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
237[ 0.106522] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
238[ 0.106529] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
239[ 0.106597] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
240[ 0.106606] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
241[ 0.106611] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
242[ 0.106615] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
243[ 0.106690] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
244[ 0.106712] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
245[ 0.106779] pci 0000:00:14.0: PME# supported from D3hot D3cold
246[ 0.106810] pci 0000:00:14.0: System wakeup disabled by ACPI
247[ 0.106840] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
248[ 0.106861] pci 0000:00:16.0: reg 0x10: [mem 0xe0636100-0xe063610f 64bit]
249[ 0.106934] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
250[ 0.106994] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
251[ 0.107011] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
252[ 0.107020] pci 0000:00:19.0: reg 0x14: [mem 0xe0634000-0xe0634fff]
253[ 0.107027] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
254[ 0.107086] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
255[ 0.107141] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
256[ 0.107160] pci 0000:00:1a.0: reg 0x10: [mem 0xe0635800-0xe0635bff]
257[ 0.107246] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
258[ 0.107278] pci 0000:00:1a.0: System wakeup disabled by ACPI
259[ 0.107307] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
260[ 0.107321] pci 0000:00:1b.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
261[ 0.107385] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
262[ 0.107416] pci 0000:00:1b.0: System wakeup disabled by ACPI
263[ 0.107446] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
264[ 0.107568] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
265[ 0.107638] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
266[ 0.107764] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
267[ 0.107834] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
268[ 0.107951] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
269[ 0.108023] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
270[ 0.108044] pci 0000:00:1d.0: reg 0x10: [mem 0xe0635c00-0xe0635fff]
271[ 0.108129] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
272[ 0.108161] pci 0000:00:1d.0: System wakeup disabled by ACPI
273[ 0.108188] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
274[ 0.108338] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
275[ 0.108357] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887]
276[ 0.108366] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893]
277[ 0.108374] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f]
278[ 0.108382] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897]
279[ 0.108390] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f]
280[ 0.108398] pci 0000:00:1f.2: reg 0x24: [mem 0xe0635000-0xe06357ff]
281[ 0.108446] pci 0000:00:1f.2: PME# supported from D3hot
282[ 0.108495] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
283[ 0.108510] pci 0000:00:1f.3: reg 0x10: [mem 0xe0636000-0xe06360ff 64bit]
284[ 0.108529] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
285[ 0.108701] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
286[ 0.108726] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
287[ 0.108746] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
288[ 0.108747] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller
289[ 0.108787] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff]
290[ 0.109068] pci 0000:01:00.0: supports D1 D2
291[ 0.109070] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
292[ 0.109182] pci 0000:01:00.1: [1180:e232] type 00 class 0x088000
293[ 0.109217] pci 0000:01:00.1: reg 0x10: [mem 0xe0400100-0xe04001ff]
294[ 0.109492] pci 0000:01:00.1: supports D1 D2
295[ 0.109494] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
296[ 0.116933] pci 0000:00:1c.0: PCI bridge to [bus 01]
297[ 0.116944] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
298[ 0.117189] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
299[ 0.117354] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit]
300[ 0.118058] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
301[ 0.129039] pci 0000:00:1c.1: PCI bridge to [bus 02]
302[ 0.129047] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
303[ 0.129132] pci 0000:00:1c.2: PCI bridge to [bus 03]
304[ 0.129315] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
305[ 0.129354] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
306[ 0.129391] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
307[ 0.129427] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
308[ 0.129463] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
309[ 0.129499] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
310[ 0.129536] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
311[ 0.129572] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
312[ 0.129912] ACPI: \_SB_.PCI0: notify handler is installed
313[ 0.129936] Found 1 acpi root devices
314[ 0.129967] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
315[ 0.130025] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
316[ 0.130028] vgaarb: loaded
317[ 0.130028] vgaarb: bridge control possible 0000:00:02.0
318[ 0.130055] PCI: Using ACPI for IRQ routing
319[ 0.131525] PCI: pci_cache_line_size set to 64 bytes
320[ 0.131639] e820: reserve RAM buffer [mem 0xaced0000-0xafffffff]
321[ 0.131641] e820: reserve RAM buffer [mem 0x44e600000-0x44fffffff]
322[ 0.131716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
323[ 0.131720] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
324[ 0.133741] Switched to clocksource hpet
325[ 0.134936] pnp: PnP ACPI init
326[ 0.134948] ACPI: bus type PNP registered
327[ 0.134989] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
328[ 0.134991] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
329[ 0.134993] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
330[ 0.134994] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
331[ 0.134996] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
332[ 0.134998] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
333[ 0.134999] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
334[ 0.135001] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
335[ 0.135002] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
336[ 0.135004] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
337[ 0.135006] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
338[ 0.135269] pnp 00:01: [dma 4]
339[ 0.135288] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
340[ 0.135304] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
341[ 0.135371] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
342[ 0.135373] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
343[ 0.135397] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
344[ 0.135422] system 00:05: [io 0x0500-0x057f] could not be reserved
345[ 0.135423] system 00:05: [io 0x0480-0x04bf] has been reserved
346[ 0.135425] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
347[ 0.135442] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
348[ 0.135468] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
349[ 0.135491] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
350[ 0.135500] pnp: PnP ACPI: found 9 devices
351[ 0.135501] ACPI: bus type PNP unregistered
352[ 0.141341] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
353[ 0.141343] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
354[ 0.141345] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
355[ 0.141349] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
356[ 0.141350] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
357[ 0.141352] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
358[ 0.141356] pci 0000:00:1c.2: BAR 14: assigned [mem 0xafa00000-0xafbfffff]
359[ 0.141359] pci 0000:00:1c.2: BAR 15: assigned [mem 0xafc00000-0xafdfffff 64bit pref]
360[ 0.141360] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
361[ 0.141362] pci 0000:00:1c.0: PCI bridge to [bus 01]
362[ 0.141370] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
363[ 0.141381] pci 0000:00:1c.1: PCI bridge to [bus 02]
364[ 0.141387] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
365[ 0.141398] pci 0000:00:1c.2: PCI bridge to [bus 03]
366[ 0.141401] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
367[ 0.141408] pci 0000:00:1c.2: bridge window [mem 0xafa00000-0xafbfffff]
368[ 0.141412] pci 0000:00:1c.2: bridge window [mem 0xafc00000-0xafdfffff 64bit pref]
369[ 0.141421] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
370[ 0.141422] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
371[ 0.141424] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
372[ 0.141425] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
373[ 0.141426] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
374[ 0.141427] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
375[ 0.141429] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
376[ 0.141430] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
377[ 0.141431] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
378[ 0.141433] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
379[ 0.141434] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
380[ 0.141435] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
381[ 0.141437] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
382[ 0.141438] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
383[ 0.141439] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
384[ 0.141441] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
385[ 0.141442] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfebfffff]
386[ 0.141443] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
387[ 0.141445] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
388[ 0.141446] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
389[ 0.141448] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
390[ 0.141449] pci_bus 0000:03: resource 1 [mem 0xafa00000-0xafbfffff]
391[ 0.141450] pci_bus 0000:03: resource 2 [mem 0xafc00000-0xafdfffff 64bit pref]
392[ 0.141500] NET: Registered protocol family 2
393[ 0.141680] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
394[ 0.141892] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
395[ 0.141994] TCP: Hash tables configured (established 131072 bind 65536)
396[ 0.142010] TCP: reno registered
397[ 0.142025] UDP hash table entries: 8192 (order: 6, 262144 bytes)
398[ 0.142070] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
399[ 0.142160] NET: Registered protocol family 1
400[ 0.142172] pci 0000:00:02.0: Boot video device
401[ 0.142230] pci 0000:00:14.0: can't derive routing for PCI INT A
402[ 0.142232] pci 0000:00:14.0: PCI INT A: no GSI
403[ 0.142304] pci 0000:00:14.0: can't derive routing for PCI INT A
404[ 0.142546] PCI: CLS 64 bytes, default 64
405[ 0.142582] Unpacking initramfs...
406[ 0.374305] Freeing initrd memory: 16032K (ffff8800360a0000 - ffff880037048000)
407[ 0.374310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
408[ 0.374311] software IO TLB [mem 0xa8ed0000-0xaced0000] (64MB) mapped at [ffff8800a8ed0000-ffff8800acecffff]
409[ 0.374474] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
410[ 0.374480] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
411[ 0.374488] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
412[ 0.374495] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
413[ 0.374540] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
414[ 0.374727] audit: initializing netlink socket (disabled)
415[ 0.374736] type=2000 audit(1393503707.372:1): initialized
416[ 0.386086] HugeTLB registered 2 MB page size, pre-allocated 0 pages
417[ 0.386802] VFS: Disk quotas dquot_6.5.2
418[ 0.386820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
419[ 0.386877] msgmni has been set to 32004
420[ 0.387116] alg: No test for stdrng (krng)
421[ 0.387137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
422[ 0.387165] io scheduler noop registered
423[ 0.387167] io scheduler deadline registered
424[ 0.387182] io scheduler cfq registered (default)
425[ 0.387330] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
426[ 0.387480] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
427[ 0.387558] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
428[ 0.387633] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
429[ 0.387746] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
430[ 0.387748] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
431[ 0.387749] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
432[ 0.387754] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
433[ 0.387774] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
434[ 0.387775] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
435[ 0.387780] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
436[ 0.387800] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
437[ 0.387805] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
438[ 0.387814] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
439[ 0.387848] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 1e14 ss_vid 8086 ss_did 1e14
440[ 0.387875] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
441[ 0.387878] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
442[ 0.387900] intel_idle: MWAIT substates: 0x21120
443[ 0.387901] intel_idle: v0.4 model 0x3A
444[ 0.387902] intel_idle: lapic_timer_reliable_states 0xffffffff
445[ 0.387989] GHES: HEST is not enabled!
446[ 0.388031] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
447[ 0.388349] Linux agpgart interface v0.103
448[ 0.388413] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
449[ 0.390761] serio: i8042 KBD port at 0x60,0x64 irq 1
450[ 0.390764] serio: i8042 AUX port at 0x60,0x64 irq 12
451[ 0.390853] mousedev: PS/2 mouse device common for all mice
452[ 0.390886] rtc_cmos 00:06: RTC can wake from S4
453[ 0.391006] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
454[ 0.391032] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
455[ 0.391039] Intel P-state driver initializing.
456[ 0.391048] Intel pstate controlling: cpu 0
457[ 0.391064] Intel pstate controlling: cpu 1
458[ 0.391075] Intel pstate controlling: cpu 2
459[ 0.391086] Intel pstate controlling: cpu 3
460[ 0.391104] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
461[ 0.391105] AMD IOMMUv2 functionality not available on this system
462[ 0.391191] TCP: cubic registered
463[ 0.391247] NET: Registered protocol family 10
464[ 0.391394] mip6: Mobile IPv6
465[ 0.391396] NET: Registered protocol family 17
466[ 0.391398] mpls_gso: MPLS GSO support
467[ 0.391582] registered taskstats version 1
468[ 0.392444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
469[ 0.392528] rtc_cmos 00:06: setting system clock to 2014-02-27 12:21:47 UTC (1393503707)
470[ 0.392551] PM: Hibernation image not present or could not be loaded.
471[ 0.393003] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
472[ 0.393004] Write protecting the kernel read-only data: 8192k
473[ 0.395259] Freeing unused kernel memory: 1328K (ffff8800014b4000 - ffff880001600000)
474[ 0.395976] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000)
475[ 0.439414] systemd-udevd[70]: starting version 204
476[ 0.448067] ACPI: bus type USB registered
477[ 0.448093] usbcore: registered new interface driver usbfs
478[ 0.448101] usbcore: registered new interface driver hub
479[ 0.450367] usbcore: registered new device driver usb
480[ 0.450713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
481[ 0.450870] ehci-pci: EHCI PCI platform driver
482[ 0.450981] ehci-pci 0000:00:1a.0: EHCI Host Controller
483[ 0.450987] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
484[ 0.451002] ehci-pci 0000:00:1a.0: debug port 2
485[ 0.451047] sdhci: Secure Digital Host Controller Interface driver
486[ 0.451048] sdhci: Copyright(c) Pierre Ossman
487[ 0.451204] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
488[ 0.451582] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
489[ 0.454909] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
490[ 0.454932] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0635800
491[ 0.455100] SCSI subsystem initialized
492[ 0.455904] pps_core: LinuxPPS API ver. 1 registered
493[ 0.455906] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
494[ 0.455915] libata version 3.00 loaded.
495[ 0.456072] PTP clock support registered
496[ 0.456666] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
497[ 0.456668] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
498[ 0.457192] thermal LNXTHERM:00: registered as thermal_zone0
499[ 0.457195] ACPI: Thermal Zone [THM0] (63 C)
500[ 0.458552] thermal LNXTHERM:01: registered as thermal_zone1
501[ 0.458555] ACPI: Thermal Zone [THM1] (27 C)
502[ 0.466173] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
503[ 0.466209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
504[ 0.466211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
505[ 0.466213] usb usb1: Product: EHCI Host Controller
506[ 0.466215] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
507[ 0.466216] usb usb1: SerialNumber: 0000:00:1a.0
508[ 0.466332] hub 1-0:1.0: USB hub found
509[ 0.466464] hub 1-0:1.0: 3 ports detected
510[ 0.466678] ehci-pci 0000:00:1d.0: EHCI Host Controller
511[ 0.466684] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
512[ 0.466697] ehci-pci 0000:00:1d.0: debug port 2
513[ 0.470615] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
514[ 0.470635] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0635c00
515[ 0.472351] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
516[ 0.475163] alg: No test for crc32 (crc32-pclmul)
517[ 0.482186] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
518[ 0.482256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
519[ 0.482258] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
520[ 0.482260] usb usb2: Product: EHCI Host Controller
521[ 0.482261] usb usb2: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
522[ 0.482262] usb usb2: SerialNumber: 0000:00:1d.0
523[ 0.482352] hub 2-0:1.0: USB hub found
524[ 0.482362] hub 2-0:1.0: 3 ports detected
525[ 0.482570] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
526[ 0.482572] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
527[ 0.482597] xhci_hcd 0000:00:14.0: xHCI Host Controller
528[ 0.482602] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
529[ 0.482702] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
530[ 0.482725] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
531[ 0.482826] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
532[ 0.482828] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
533[ 0.482829] usb usb3: Product: xHCI Host Controller
534[ 0.482830] usb usb3: Manufacturer: Linux 3.13-1-amd64 xhci_hcd
535[ 0.482831] usb usb3: SerialNumber: 0000:00:14.0
536[ 0.482922] hub 3-0:1.0: USB hub found
537[ 0.482935] hub 3-0:1.0: 4 ports detected
538[ 0.483046] xhci_hcd 0000:00:14.0: xHCI Host Controller
539[ 0.483049] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
540[ 0.483125] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
541[ 0.483127] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
542[ 0.483128] usb usb4: Product: xHCI Host Controller
543[ 0.483129] usb usb4: Manufacturer: Linux 3.13-1-amd64 xhci_hcd
544[ 0.483130] usb usb4: SerialNumber: 0000:00:14.0
545[ 0.483206] hub 4-0:1.0: USB hub found
546[ 0.483218] hub 4-0:1.0: 4 ports detected
547[ 0.510251] ahci 0000:00:1f.2: version 3.0
548[ 0.510359] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
549[ 0.510385] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
550[ 0.526301] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
551[ 0.526308] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
552[ 0.526677] scsi0 : ahci
553[ 0.526755] scsi1 : ahci
554[ 0.526810] scsi2 : ahci
555[ 0.526860] scsi3 : ahci
556[ 0.526911] scsi4 : ahci
557[ 0.526955] scsi5 : ahci
558[ 0.526977] ata1: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635100 irq 44
559[ 0.526979] ata2: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635180 irq 44
560[ 0.526982] ata3: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635200 irq 44
561[ 0.526983] ata4: DUMMY
562[ 0.526983] ata5: DUMMY
563[ 0.526984] ata6: DUMMY
564[ 0.527070] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
565[ 0.527088] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
566[ 0.726930] e1000e 0000:00:19.0 eth0: registered PHC clock
567[ 0.726935] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab
568[ 0.726938] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
569[ 0.726999] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
570[ 0.778709] usb 1-1: new high-speed USB device number 2 using ehci-pci
571[ 0.846743] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
572[ 0.847160] ata1.00: supports DRM functions and may not be fully accessible
573[ 0.847401] ata1.00: disabling queued TRIM support
574[ 0.847406] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
575[ 0.847409] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
576[ 0.848355] ata1.00: supports DRM functions and may not be fully accessible
577[ 0.848596] ata1.00: disabling queued TRIM support
578[ 0.849191] ata1.00: configured for UDMA/133
579[ 0.849466] scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
580[ 0.911528] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
581[ 0.911534] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
582[ 0.911900] hub 1-1:1.0: USB hub found
583[ 0.912077] hub 1-1:1.0: 6 ports detected
584[ 1.022935] usb 2-1: new high-speed USB device number 2 using ehci-pci
585[ 1.155534] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
586[ 1.155540] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
587[ 1.155936] hub 2-1:1.0: USB hub found
588[ 1.156125] hub 2-1:1.0: 8 ports detected
589[ 1.167120] ata2: SATA link down (SStatus 0 SControl 300)
590[ 1.227370] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
591[ 1.321010] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
592[ 1.321016] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
593[ 1.321019] usb 1-1.3: Product: Biometric Coprocessor
594[ 1.321022] usb 1-1.3: Manufacturer: Auth
595[ 1.375384] tsc: Refined TSC clocksource calibration: 2793.653 MHz
596[ 1.391580] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
597[ 1.487491] ata3: SATA link down (SStatus 0 SControl 300)
598[ 1.488148] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
599[ 1.488154] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
600[ 1.488157] usb 1-1.4: Product: BCM20702A0
601[ 1.488160] usb 1-1.4: Manufacturer: Broadcom Corp
602[ 1.488162] usb 1-1.4: SerialNumber: 2016D8D6A3C7
603[ 1.493577] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
604[ 1.493583] sd 0:0:0:0: [sda] 4096-byte physical blocks
605[ 1.493768] sd 0:0:0:0: [sda] Write Protect is off
606[ 1.493776] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
607[ 1.493839] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
608[ 1.495576] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
609[ 1.496559] sd 0:0:0:0: [sda] Attached SCSI disk
610[ 1.498231] sd 0:0:0:0: Attached scsi generic sg0 type 0
611[ 1.559600] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
612[ 1.564832] device-mapper: uevent: version 1.0.3
613[ 1.564897] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
614[ 1.639618] raid6: sse2x1 6598 MB/s
615[ 1.663218] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
616[ 1.663221] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
617[ 1.663223] usb 1-1.6: Product: Integrated Camera
618[ 1.663225] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
619[ 1.707696] raid6: sse2x2 9930 MB/s
620[ 1.735836] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
621[ 1.775782] raid6: sse2x4 13698 MB/s
622[ 1.775783] raid6: using algorithm sse2x4 (13698 MB/s)
623[ 1.775784] raid6: using ssse3x2 recovery algorithm
624[ 1.775975] xor: automatically using best checksumming function:
625[ 1.815830] avx : 26969.000 MB/sec
626[ 1.817582] bio: create slab <bio-1> at 1
627[ 1.817726] Btrfs loaded
628[ 1.829948] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0
629[ 1.829950] usb 2-1.4: config 1 has no interface number 0
630[ 1.831826] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204
631[ 1.831829] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
632[ 1.831830] usb 2-1.4: Product: Qualcomm Gobi 2000
633[ 1.831831] usb 2-1.4: Manufacturer: Qualcomm Incorporated
634[ 1.882470] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
635[ 1.883867] XFS (sda4): Mounting Filesystem
636[ 1.908972] XFS (sda4): Ending clean mount
637[ 2.056417] systemd-udevd[416]: starting version 204
638[ 2.133655] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
639[ 2.135180] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input2
640[ 2.135186] ACPI: Sleep Button [SLPB]
641[ 2.135236] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input3
642[ 2.135350] ACPI: Lid Switch [LID]
643[ 2.135411] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
644[ 2.135415] ACPI: Power Button [PWRF]
645[ 2.144743] ACPI Warning: 0x0000000000000528-0x000000000000052f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
646[ 2.144749] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
647[ 2.144752] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
648[ 2.144755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
649[ 2.144756] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
650[ 2.144758] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
651[ 2.144760] lpc_ich: Resource conflict(s) found affecting gpio_ich
652[ 2.144870] cfg80211: Calling CRDA to update world regulatory domain
653[ 2.149786] [drm] Initialized drm 1.1.0 20060810
654[ 2.150098] Intel(R) Wireless WiFi driver for Linux, in-tree:
655[ 2.150100] Copyright(c) 2003-2013 Intel Corporation
656[ 2.150501] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
657[ 2.150957] input: PC Speaker as /devices/platform/pcspkr/input/input5
658[ 2.151049] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
659[ 2.157242] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
660[ 2.157410] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
661[ 2.163878] Non-volatile memory driver v1.3
662[ 2.166815] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
663[ 2.166818] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
664[ 2.166820] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
665[ 2.166822] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
666[ 2.167218] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
667[ 2.168462] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
668[ 2.176845] udevd[594]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
669[ 2.190696] udevd[613]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
670[ 2.191481] udevd[616]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
671[ 2.192192] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
672[ 2.197132] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
673[ 2.208219] udevd[655]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
674[ 2.210142] udevd[662]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
675[ 2.211865] udevd[664]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
676[ 2.212566] ACPI: AC Adapter [AC] (on-line)
677[ 2.212643] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
678[ 2.214504] udevd[671]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
679[ 2.215470] udevd[675]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
680[ 2.216441] Bluetooth: Core ver 2.17
681[ 2.216454] NET: Registered protocol family 31
682[ 2.216455] Bluetooth: HCI device and connection manager initialized
683[ 2.216462] Bluetooth: HCI socket layer initialized
684[ 2.216464] Bluetooth: L2CAP socket layer initialized
685[ 2.216467] Bluetooth: SCO socket layer initialized
686[ 2.216637] media: Linux media interface: v0.10
687[ 2.218828] udevd[688]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
688[ 2.219036] Linux video capture interface: v2.00
689[ 2.219407] usbcore: registered new interface driver btusb
690[ 2.219949] udevd[694]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
691[ 2.220519] udevd[695]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
692[ 2.222683] udevd[698]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
693[ 2.223176] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
694[ 2.225620] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
695[ 2.225794] usbcore: registered new interface driver uvcvideo
696[ 2.225796] USB Video Class driver (1.1.1)
697[ 2.227968] usbcore: registered new interface driver usbserial
698[ 2.227980] usbcore: registered new interface driver usbserial_generic
699[ 2.227989] usbserial: USB Serial support registered for generic
700[ 2.228855] acpi device:07: registered as cooling_device4
701[ 2.229329] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
702[ 2.229472] udevd[708]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
703[ 2.230048] usbcore: registered new interface driver qcserial
704[ 2.230060] usbserial: USB Serial support registered for Qualcomm USB modem
705[ 2.230083] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
706[ 2.230164] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
707[ 2.236869] ACPI: Battery Slot [BAT0] (battery present)
708[ 2.236963] ACPI: Battery Slot [BAT1] (battery absent)
709[ 2.240509] udevd[711]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
710[ 2.242491] iTCO_vendor_support: vendor-support=0
711[ 2.242908] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
712[ 2.242936] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
713[ 2.243138] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
714[ 2.263745] Failed to find thinkpad-acpi symbol tpacpi_led_set
715[ 2.267671] cfg80211: World regulatory domain updated:
716[ 2.267674] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
717[ 2.267675] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
718[ 2.267676] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
719[ 2.267678] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
720[ 2.267679] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
721[ 2.267680] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
722[ 2.269645] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
723[ 2.269699] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
724[ 2.269739] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
725[ 2.269780] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
726[ 2.269829] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
727[ 2.269871] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
728[ 2.269909] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
729[ 2.271110] [drm] Memory usable by graphics device = 2048M
730[ 2.289253] i915 0000:00:02.0: irq 49 for MSI/MSI-X
731[ 2.289263] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
732[ 2.289265] [drm] Driver supports precise vblank timestamp query.
733[ 2.289335] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
734[ 2.320148] random: alsactl urandom read with 90 bits of entropy available
735[ 2.376614] Switched to clocksource tsc
736[ 2.412574] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
737[ 2.429819] fbcon: inteldrmfb (fb0) is primary device
738[ 2.602120] random: nonblocking pool is initialized
739[ 3.010644] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
740[ 3.010652] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
741[ 3.050349] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
742[ 3.202375] Console: switching to colour frame buffer device 170x48
743[ 3.206759] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
744[ 3.206762] i915 0000:00:02.0: registered panic notifier
745[ 3.206788] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
746[ 3.822629] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
747[ 5.342429] usb 2-1.4: USB disconnect, device number 3
748[ 5.342712] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
749[ 5.342741] qcserial 2-1.4:1.1: device disconnected
750[ 5.348983] udevd[1330]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
751[ 5.354021] udevd[1337]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
752[ 5.936073] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
753[ 6.561946] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
754[ 6.665132] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
755[ 6.665139] usb 2-1.4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
756[ 6.665143] usb 2-1.4: Product: Qualcomm Gobi 2000
757[ 6.665145] usb 2-1.4: Manufacturer: Qualcomm Incorporated
758[ 6.669425] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
759[ 6.669611] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
760[ 6.670489] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
761[ 6.670669] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
762[ 6.671434] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
763[ 6.671588] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
764[ 6.686612] udevd[1356]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
765[ 6.689891] udevd[1363]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
766[ 6.691580] udevd[1371]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
767[ 6.698021] usbcore: registered new interface driver cdc_wdm
768[ 6.701478] qmi_wwan 2-1.4:1.0: cdc-wdm0: USB WDM device
769[ 6.701610] qmi_wwan 2-1.4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.4, WWAN/QMI device, a2:e3:76:90:1a:2b
770[ 6.701636] usbcore: registered new interface driver qmi_wwan
771[ 6.702254] udevd[1383]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
772[ 7.242280] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
773[ 7.444156] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
774[ 12.565169] bio: create slab <bio-2> at 2
775[ 12.634363] bio: create slab <bio-2> at 2
776[ 12.690625] loop: module loaded
777[ 12.697080] fuse init (API version 7.22)
778[ 12.792377] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
779[ 12.795337] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
780[ 12.795874] XFS (dm-0): Mounting Filesystem
781[ 12.819364] XFS (dm-0): Ending clean mount
782[ 12.828103] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
783[ 12.828803] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
784[ 13.512370] Bluetooth: RFCOMM TTY layer initialized
785[ 13.512378] Bluetooth: RFCOMM socket layer initialized
786[ 13.512382] Bluetooth: RFCOMM ver 1.11
787[ 13.516495] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
788[ 13.516499] Bluetooth: BNEP filters: protocol multicast
789[ 13.516506] Bluetooth: BNEP socket layer initialized
790[ 13.519974] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
791[ 13.526903] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
792[ 13.794181] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
793[ 13.801065] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
794[ 13.891464] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
795[ 14.020079] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
796[ 14.123226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
797[ 14.123477] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
798[ 14.369052] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
799[ 14.724257] type=1006 audit(1393503721.809:2): pid=3059 uid=0 old auid=4294967295 new auid=114 old ses=4294967295 new ses=1 res=1
800[ 14.739086] systemd-logind[3134]: New seat seat0.
801[ 14.739514] systemd-logind[3134]: Watching system buttons on /dev/input/event3 (Power Button)
802[ 14.739557] systemd-logind[3134]: Watching system buttons on /dev/input/event7 (Video Bus)
803[ 14.739593] systemd-logind[3134]: Watching system buttons on /dev/input/event2 (Lid Switch)
804[ 14.739631] systemd-logind[3134]: Watching system buttons on /dev/input/event1 (Sleep Button)
805[ 14.740123] systemd-logind[3134]: New session 1 of user Debian-gdm.
806[ 14.740188] systemd-logind[3134]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
807[ 18.874748] systemd-logind[3134]: New session c1 of user phcoder.
808[ 18.874832] systemd-logind[3134]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
809[ 21.208161] wlan0: authenticate with 00:24:37:96:06:b0
810[ 21.211553] wlan0: send auth to 00:24:37:96:06:b0 (try 1/3)
811[ 21.213804] wlan0: authenticated
812[ 21.213896] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
813[ 21.213899] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
814[ 21.215897] wlan0: associate with 00:24:37:96:06:b0 (try 1/3)
815[ 21.218740] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=5)
816[ 21.220458] wlan0: associated
817[ 21.220477] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready