blob: 08221ce292e91314b6f57f1a9258fea305deb0dd [file] [log] [blame]
Michał Żygowski9d3f2162019-03-26 13:37:47 +01001[ 0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.144-3.1 (2019-02-19)
2[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=/dev/sda1 ro console=ttyS0,115200 earlyprint=serial,ttyS0,115200 initrd=http://ftp.nl.debian.org/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/initrd.gz quiet
3[ 0.000000] x86/fpu: Legacy x87 FPU detected.
4[ 0.000000] e820: BIOS-provided physical RAM map:
5[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
6[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
7[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ed33fff] usable
9[ 0.000000] BIOS-e820: [mem 0x000000007ed34000-0x000000007effffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
12[ 0.000000] NX (Execute Disable) protection: active
13[ 0.000000] SMBIOS 2.7 present.
14[ 0.000000] DMI: PC Engines apu1/, BIOS 4.9-1151-g78134b0ccd 03/26/2019
15[ 0.000000] Kernel/User page tables isolation: disabled
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] e820: last_pfn = 0x7ed34 max_arch_pfn = 0x400000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
26[ 0.000000] 1 base 000000000 mask F80000000 write-back
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
34[ 0.000000] found SMP MP-table at [mem 0x000f6080-0x000f608f] mapped at [ffff8bdc000f6080]
35[ 0.000000] Base memory trampoline at [ffff8bdc00099000] 99000 size 24576
36[ 0.000000] Using GB pages for direct mapping
37[ 0.000000] BRK [0x3a334000, 0x3a334fff] PGTABLE
38[ 0.000000] BRK [0x3a335000, 0x3a335fff] PGTABLE
39[ 0.000000] BRK [0x3a336000, 0x3a336fff] PGTABLE
40[ 0.000000] BRK [0x3a337000, 0x3a337fff] PGTABLE
41[ 0.000000] BRK [0x3a338000, 0x3a338fff] PGTABLE
42[ 0.000000] BRK [0x3a339000, 0x3a339fff] PGTABLE
43[ 0.000000] RAMDISK: [mem 0x35d51000-0x36e9ffff]
44[ 0.000000] ACPI: Early table checksum verification disabled
45[ 0.000000] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4)
46[ 0.000000] ACPI: XSDT 0x000000007ED490E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
47[ 0.000000] ACPI: FACP 0x000000007ED4B920 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000)
48[ 0.000000] ACPI: DSDT 0x000000007ED49280 002697 (v02 COREv4 COREBOOT 00010001 INTL 20180531)
49[ 0.000000] ACPI: FACS 0x000000007ED49240 000040
50[ 0.000000] ACPI: FACS 0x000000007ED49240 000040
51[ 0.000000] ACPI: SSDT 0x000000007ED4BA20 0001E1 (v02 COREv4 COREBOOT 0000002A CORE 00000000)
52[ 0.000000] ACPI: TPM2 0x000000007ED4BC10 00004C (v04 COREv4 COREBOOT 00000000 CORE 00000000)
53[ 0.000000] ACPI: APIC 0x000000007ED4BC60 00005C (v02 COREv4 COREBOOT 00000000 CORE 00000000)
54[ 0.000000] ACPI: HEST 0x000000007ED4BCC0 000198 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
55[ 0.000000] ACPI: SSDT 0x000000007ED4BE60 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
56[ 0.000000] ACPI: SSDT 0x000000007ED4D4F0 00030C (v01 AMD POWERNOW 00000001 AMD 00000001)
57[ 0.000000] ACPI: HPET 0x000000007ED4D800 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: Local APIC address 0xfee00000
59[ 0.000000] No NUMA configuration found
60[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ed33fff]
61[ 0.000000] NODE_DATA(0) allocated [mem 0x7ed2f000-0x7ed33fff]
62[ 0.000000] Zone ranges:
63[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
64[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ed33fff]
65[ 0.000000] Normal empty
66[ 0.000000] Device empty
67[ 0.000000] Movable zone start for each node
68[ 0.000000] Early memory node ranges
69[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
70[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ed33fff]
71[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ed33fff]
72[ 0.000000] On node 0 totalpages: 519378
73[ 0.000000] DMA zone: 64 pages used for memmap
74[ 0.000000] DMA zone: 21 pages reserved
75[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
76[ 0.000000] DMA32 zone: 8053 pages used for memmap
77[ 0.000000] DMA32 zone: 515380 pages, LIFO batch:31
78[ 0.000000] ACPI: PM-Timer IO Port: 0x808
79[ 0.000000] ACPI: Local APIC address 0xfee00000
80[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
81[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
82[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
83[ 0.000000] ACPI: IRQ0 used by override.
84[ 0.000000] ACPI: IRQ9 used by override.
85[ 0.000000] Using ACPI (MADT) for SMP configuration information
86[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
87[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
88[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
89[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
90[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
91[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
92[ 0.000000] e820: [mem 0x7f000000-0xf7ffffff] available for PCI devices
93[ 0.000000] Booting paravirtualized kernel on bare hardware
94[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
95[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
96[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8bdc7ea00000 s105304 r8192 d29864 u1048576
97[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u1048576 alloc=1*2097152
98[ 0.000000] pcpu-alloc: [0] 0 1
99[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 511240
100[ 0.000000] Policy zone: DMA32
101[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=/dev/sda1 ro console=ttyS0,115200 earlyprint=serial,ttyS0,115200 initrd=http://ftp.nl.debian.org/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/initrd.gz quiet
102[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
103[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
104[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
105[ 0.000000] Memory: 2010960K/2077512K available (6268K kernel code, 1161K rwdata, 2872K rodata, 1424K init, 656K bss, 66552K reserved, 0K cma-reserved)
106[ 0.000000] Hierarchical RCU implementation.
107[ 0.000000] Build-time adjustment of leaf fanout to 64.
108[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
109[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
110[ 0.000000] NR_IRQS:33024 nr_irqs:440 16
111[ 0.000000] spurious 8259A interrupt: IRQ7.
112[ 0.000000] Console: colour dummy device 80x25
113[ 0.000000] console [ttyS0] enabled
114[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
115[ 0.000000] hpet clockevent registered
116[ 0.000000] tsc: Fast TSC calibration using PIT
117[ 0.000000] tsc: Detected 1000.070 MHz processor
118[ 0.000065] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.14 BogoMIPS (lpj=4000280)
119[ 0.000074] pid_max: default: 32768 minimum: 301
120[ 0.000138] ACPI: Core revision 20160831
121[ 0.009887] ACPI: 4 ACPI AML tables successfully acquired and loaded
122[ 0.010069] Security Framework initialized
123[ 0.010074] Yama: disabled by default; enable with sysctl kernel.yama.*
124[ 0.010092] AppArmor: AppArmor disabled by boot time parameter
125[ 0.010533] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
126[ 0.012226] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
127[ 0.013064] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
128[ 0.013083] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
129[ 0.013972] mce: CPU supports 6 MCE banks
130[ 0.014001] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
131[ 0.014004] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
132[ 0.014012] Spectre V2 : Mitigation: Full AMD retpoline
133[ 0.014014] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
134[ 0.014016] Speculative Store Bypass: Vulnerable
135[ 0.015264] Freeing SMP alternatives memory: 24K
136[ 0.020485] ftrace: allocating 25295 entries in 99 pages
137[ 0.067699] smpboot: Max logical packages: 1
138[ 0.068199] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
139[ 0.214083] smpboot: CPU0: AMD G-T40E Processor (family: 0x14, model: 0x2, stepping: 0x0)
140[ 0.214097] Performance Events: AMD PMU driver.
141[ 0.214108] ... version: 0
142[ 0.214111] ... bit width: 48
143[ 0.214112] ... generic registers: 4
144[ 0.214115] ... value mask: 0000ffffffffffff
145[ 0.214117] ... max period: 00007fffffffffff
146[ 0.214119] ... fixed-purpose events: 0
147[ 0.214121] ... event mask: 000000000000000f
148[ 0.215995] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
149[ 0.216597] x86: Booting SMP configuration:
150[ 0.216601] .... node #0, CPUs: #1
151[ 0.219121] x86: Booted up 1 node, 2 CPUs
152[ 0.219127] smpboot: Total of 2 processors activated (4000.28 BogoMIPS)
153[ 0.220595] devtmpfs: initialized
154[ 0.220859] x86/mm: Memory block size: 128MB
155[ 0.232004] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
156[ 0.232030] futex hash table entries: 512 (order: 3, 32768 bytes)
157[ 0.232165] pinctrl core: initialized pinctrl subsystem
158[ 0.232676] NET: Registered protocol family 16
159[ 0.243224] cpuidle: using governor ladder
160[ 0.255222] cpuidle: using governor menu
161[ 0.255572] ACPI: bus type PCI registered
162[ 0.255577] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
163[ 0.255919] PCI: Using configuration type 1 for base access
164[ 0.255921] PCI: Using configuration type 1 for extended access
165[ 0.256629] mtrr: your CPUs had inconsistent variable MTRR settings
166[ 0.256633] mtrr: probably your BIOS does not setup all CPUs.
167[ 0.256635] mtrr: corrected configuration.
168[ 0.268631] HugeTLB registered 1 GB page size, pre-allocated 0 pages
169[ 0.268636] HugeTLB registered 2 MB page size, pre-allocated 0 pages
170[ 0.269827] ACPI: Added _OSI(Module Device)
171[ 0.269831] ACPI: Added _OSI(Processor Device)
172[ 0.269834] ACPI: Added _OSI(3.0 _SCP Extensions)
173[ 0.269837] ACPI: Added _OSI(Processor Aggregator Device)
174[ 0.270766] ACPI: Executed 3 blocks of module-level executable AML code
175[ 0.280022] ACPI: Interpreter enabled
176[ 0.280089] ACPI: (supports S0 S1 S3 S4 S5)
177[ 0.280093] ACPI: Using IOAPIC for interrupt routing
178[ 0.280146] HEST: Table parsing has been initialized.
179[ 0.280154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
180[ 0.294819] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
181[ 0.294838] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
182[ 0.295018] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
183[ 0.296074] PCI host bridge to bus 0000:00
184[ 0.296083] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
185[ 0.296087] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
186[ 0.296093] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
187[ 0.296097] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xffffffff]
188[ 0.296103] pci_bus 0000:00: root bus resource [bus 00-ff]
189[ 0.296125] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
190[ 0.296551] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
191[ 0.296665] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
192[ 0.296865] pci 0000:00:04.0: System wakeup disabled by ACPI
193[ 0.297002] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400
194[ 0.297109] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
195[ 0.297305] pci 0000:00:05.0: System wakeup disabled by ACPI
196[ 0.297443] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400
197[ 0.297549] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
198[ 0.297746] pci 0000:00:06.0: System wakeup disabled by ACPI
199[ 0.297947] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
200[ 0.297977] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
201[ 0.297994] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
202[ 0.298011] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
203[ 0.298028] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
204[ 0.298045] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
205[ 0.298063] pci 0000:00:11.0: reg 0x24: [mem 0xf7f03000-0xf7f033ff]
206[ 0.298466] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
207[ 0.298490] pci 0000:00:12.0: reg 0x10: [mem 0xf7f00000-0xf7f00fff]
208[ 0.298775] pci 0000:00:12.0: System wakeup disabled by ACPI
209[ 0.298960] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
210[ 0.299002] pci 0000:00:12.2: reg 0x10: [mem 0xf7f04000-0xf7f040ff]
211[ 0.299135] pci 0000:00:12.2: supports D1 D2
212[ 0.299140] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
213[ 0.299332] pci 0000:00:12.2: System wakeup disabled by ACPI
214[ 0.299528] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
215[ 0.299553] pci 0000:00:13.0: reg 0x10: [mem 0xf7f01000-0xf7f01fff]
216[ 0.299838] pci 0000:00:13.0: System wakeup disabled by ACPI
217[ 0.300023] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
218[ 0.300052] pci 0000:00:13.2: reg 0x10: [mem 0xf7f05000-0xf7f050ff]
219[ 0.300184] pci 0000:00:13.2: supports D1 D2
220[ 0.300188] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
221[ 0.300379] pci 0000:00:13.2: System wakeup disabled by ACPI
222[ 0.300555] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
223[ 0.301003] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
224[ 0.301451] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
225[ 0.301708] pci 0000:00:14.4: System wakeup disabled by ACPI
226[ 0.301897] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
227[ 0.301921] pci 0000:00:16.0: reg 0x10: [mem 0xf7f02000-0xf7f02fff]
228[ 0.302202] pci 0000:00:16.0: System wakeup disabled by ACPI
229[ 0.302388] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
230[ 0.302417] pci 0000:00:16.2: reg 0x10: [mem 0xf7f06000-0xf7f060ff]
231[ 0.302549] pci 0000:00:16.2: supports D1 D2
232[ 0.302554] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
233[ 0.302744] pci 0000:00:16.2: System wakeup disabled by ACPI
234[ 0.302932] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
235[ 0.303274] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
236[ 0.303597] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
237[ 0.303919] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
238[ 0.304273] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
239[ 0.304595] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
240[ 0.304921] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
241[ 0.305244] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
242[ 0.305758] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
243[ 0.305787] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
244[ 0.305824] pci 0000:01:00.0: reg 0x18: [mem 0xf7a00000-0xf7a00fff 64bit]
245[ 0.305849] pci 0000:01:00.0: reg 0x20: [mem 0xf7900000-0xf7903fff 64bit pref]
246[ 0.305980] pci 0000:01:00.0: supports D1 D2
247[ 0.305984] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
248[ 0.319236] pci 0000:00:04.0: PCI bridge to [bus 01]
249[ 0.319251] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
250[ 0.319259] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff]
251[ 0.319269] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
252[ 0.319478] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
253[ 0.319511] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
254[ 0.319548] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
255[ 0.319572] pci 0000:02:00.0: reg 0x20: [mem 0xf7b00000-0xf7b03fff 64bit pref]
256[ 0.319723] pci 0000:02:00.0: supports D1 D2
257[ 0.319727] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
258[ 0.331234] pci 0000:00:05.0: PCI bridge to [bus 02]
259[ 0.331249] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
260[ 0.331257] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff]
261[ 0.331267] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
262[ 0.331479] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
263[ 0.331511] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
264[ 0.331548] pci 0000:03:00.0: reg 0x18: [mem 0xf7e00000-0xf7e00fff 64bit]
265[ 0.331572] pci 0000:03:00.0: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit pref]
266[ 0.331721] pci 0000:03:00.0: supports D1 D2
267[ 0.331726] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
268[ 0.343232] pci 0000:00:06.0: PCI bridge to [bus 03]
269[ 0.343247] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
270[ 0.343255] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
271[ 0.343265] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref]
272[ 0.343537] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
273[ 0.343554] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
274[ 0.343559] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
275[ 0.343564] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
276[ 0.343569] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
277[ 0.345555] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15)
278[ 0.345829] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15)
279[ 0.346065] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15)
280[ 0.346301] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15)
281[ 0.346567] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15)
282[ 0.346831] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11
283[ 0.347068] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15)
284[ 0.347331] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15)
285[ 0.347811] ACPI: Enabled 6 GPEs in block 00 to 1F
286[ 0.348431] vgaarb: loaded
287[ 0.348947] PCI: Using ACPI for IRQ routing
288[ 0.348957] PCI: pci_cache_line_size set to 64 bytes
289[ 0.349107] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
290[ 0.349112] e820: reserve RAM buffer [mem 0x7ed34000-0x7fffffff]
291[ 0.349864] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
292[ 0.349879] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
293[ 0.351978] clocksource: Switched to clocksource hpet
294[ 0.376898] VFS: Disk quotas dquot_6.6.0
295[ 0.376990] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
296[ 0.377383] pnp: PnP ACPI init
297[ 0.378144] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
298[ 0.378296] pnp 00:01: Plug and Play ACPI device, IDs PNP0c31 (active)
299[ 0.378785] pnp: PnP ACPI: found 2 devices
300[ 0.397755] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
301[ 0.397883] pci 0000:00:04.0: PCI bridge to [bus 01]
302[ 0.397891] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
303[ 0.397900] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff]
304[ 0.397908] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
305[ 0.397919] pci 0000:00:05.0: PCI bridge to [bus 02]
306[ 0.397925] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
307[ 0.397933] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff]
308[ 0.397940] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
309[ 0.397951] pci 0000:00:06.0: PCI bridge to [bus 03]
310[ 0.397957] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
311[ 0.397965] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
312[ 0.397972] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref]
313[ 0.397983] pci 0000:00:14.4: PCI bridge to [bus 04]
314[ 0.398038] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
315[ 0.398043] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
316[ 0.398048] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
317[ 0.398053] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
318[ 0.398058] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
319[ 0.398062] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
320[ 0.398066] pci_bus 0000:01: resource 2 [mem 0xf7900000-0xf79fffff 64bit pref]
321[ 0.398071] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
322[ 0.398076] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
323[ 0.398080] pci_bus 0000:02: resource 2 [mem 0xf7b00000-0xf7bfffff 64bit pref]
324[ 0.398085] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
325[ 0.398089] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
326[ 0.398094] pci_bus 0000:03: resource 2 [mem 0xf7d00000-0xf7dfffff 64bit pref]
327[ 0.398099] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
328[ 0.398103] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
329[ 0.398108] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
330[ 0.398112] pci_bus 0000:04: resource 7 [mem 0x7f000000-0xffffffff]
331[ 0.398460] NET: Registered protocol family 2
332[ 0.399091] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
333[ 0.399230] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
334[ 0.399400] TCP: Hash tables configured (established 16384 bind 16384)
335[ 0.399545] UDP hash table entries: 1024 (order: 3, 32768 bytes)
336[ 0.399583] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
337[ 0.399890] NET: Registered protocol family 1
338[ 0.404343] PCI: CLS 64 bytes, default 64
339[ 0.404529] Unpacking initramfs...
340[ 1.435088] Freeing initrd memory: 17724K
341[ 1.435250] LVT offset 0 assigned for vector 0x400
342[ 1.435586] perf: AMD IBS detected (0x000000ff)
343[ 1.437193] audit: initializing netlink subsys (disabled)
344[ 1.437272] audit: type=2000 audit(1553603812.316:1): initialized
345[ 1.439251] workingset: timestamp_bits=40 max_order=19 bucket_order=0
346[ 1.439418] zbud: loaded
347[ 1.444058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
348[ 1.444197] io scheduler noop registered
349[ 1.444200] io scheduler deadline registered
350[ 1.444235] io scheduler cfq registered (default)
351[ 1.445994] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
352[ 1.446000] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
353[ 1.446007] pcie_pme 0000:00:04.0:pcie001: service driver pcie_pme loaded
354[ 1.446054] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
355[ 1.446059] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
356[ 1.446066] pcie_pme 0000:00:05.0:pcie001: service driver pcie_pme loaded
357[ 1.446111] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
358[ 1.446115] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
359[ 1.446123] pcie_pme 0000:00:06.0:pcie001: service driver pcie_pme loaded
360[ 1.446156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
361[ 1.446174] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
362[ 1.447255] GHES: Failed to enable APEI firmware first mode.
363[ 1.447708] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
364[ 1.468611] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
365[ 1.489627] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
366[ 1.491511] Linux agpgart interface v0.103
367[ 1.572326] tpm_tis 00:01: 2.0 TPM (device-id 0x1A, rev-id 16)
368[ 2.052971] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
369[ 2.052975] AMD IOMMUv2 functionality not available on this system
370[ 2.053675] i8042: PNP: No PS/2 controller found. Probing ports directly.
371[ 4.009753] i8042: No controller found
372[ 4.009770] tsc: Refined TSC clocksource calibration: 999.999 MHz
373[ 4.009779] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd42c7a813, max_idle_ns: 881590565951 ns
374[ 4.010589] mousedev: PS/2 mouse device common for all mice
375[ 4.010807] rtc_cmos 00:00: RTC can wake from S4
376[ 4.011294] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
377[ 4.011349] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
378[ 4.011570] ledtrig-cpu: registered to indicate activity on CPUs
379[ 4.012290] NET: Registered protocol family 10
380[ 4.013121] mip6: Mobile IPv6
381[ 4.013131] NET: Registered protocol family 17
382[ 4.013139] mpls_gso: MPLS GSO support
383[ 4.013817] microcode: CPU0: patch_level=0x05000119
384[ 4.013931] microcode: CPU1: patch_level=0x05000119
385[ 4.014218] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
386[ 4.014915] registered taskstats version 1
387[ 4.014963] zswap: loaded using pool lzo/zbud
388[ 4.092192] ima: Allocated hash algorithm: sha256
389[ 4.972924] rtc_cmos 00:00: setting system clock to 2019-03-26 12:36:56 UTC (1553603816)
390[ 4.973020] PM: Hibernation image not present or could not be loaded.
391[ 4.977182] Freeing unused kernel memory: 1424K
392[ 4.977189] Write protecting the kernel read-only data: 12288k
393[ 4.979843] Freeing unused kernel memory: 1908K
394[ 4.990247] Freeing unused kernel memory: 1224K
395[ 5.010357] x86/mm: Checked W+X mappings: passed, no W+X pages found.
396[ 5.016255] clocksource: Switched to clocksource tsc
397[ 5.073018] random: systemd-udevd: uninitialized urandom read (16 bytes read)
398[ 5.073323] random: systemd-udevd: uninitialized urandom read (16 bytes read)
399[ 5.073365] random: systemd-udevd: uninitialized urandom read (16 bytes read)
400[ 5.178687] thermal LNXTHERM:00: registered as thermal_zone0
401[ 5.178692] ACPI: Thermal Zone [TZ00] (67 C)
402[ 5.186493] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
403[ 5.187452] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffb30f0032d000, 00:0d:b9:46:fc:0c, XID 0c200000 IRQ 27
404[ 5.187459] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
405[ 5.187581] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
406[ 5.189095] r8169 0000:02:00.0 eth1: RTL8168e/8111e at 0xffffb30f00345000, 00:0d:b9:46:fc:0d, XID 0c200000 IRQ 28
407[ 5.189102] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
408[ 5.189170] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
409[ 5.190000] r8169 0000:03:00.0 eth2: RTL8168e/8111e at 0xffffb30f0034d000, 00:0d:b9:46:fc:0e, XID 0c200000 IRQ 29
410[ 5.190006] r8169 0000:03:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
411[ 5.198502] SCSI subsystem initialized
412[ 5.204956] ACPI: bus type USB registered
413[ 5.205073] usbcore: registered new interface driver usbfs
414[ 5.205125] usbcore: registered new interface driver hub
415[ 5.205540] libata version 3.00 loaded.
416[ 5.211250] ahci 0000:00:11.0: version 3.0
417[ 5.213680] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
418[ 5.213691] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
419[ 5.217184] scsi host0: ahci
420[ 5.217591] scsi host1: ahci
421[ 5.217938] scsi host2: ahci
422[ 5.218312] scsi host3: ahci
423[ 5.218650] scsi host4: ahci
424[ 5.220028] usbcore: registered new device driver usb
425[ 5.222051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
426[ 5.223553] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
427[ 5.223730] ehci-pci: EHCI PCI platform driver
428[ 5.224486] scsi host5: ahci
429[ 5.224787] ata1: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03100 irq 19
430[ 5.224793] ata2: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03180 irq 19
431[ 5.224798] ata3: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03200 irq 19
432[ 5.224803] ata4: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03280 irq 19
433[ 5.224808] ata5: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03300 irq 19
434[ 5.224813] ata6: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03380 irq 19
435[ 5.225102] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
436[ 5.225114] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
437[ 5.225523] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
438[ 5.227992] QUIRK: Enable AMD PLL fix
439[ 5.228106] ehci-pci 0000:00:12.2: EHCI Host Controller
440[ 5.228134] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
441[ 5.228151] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
442[ 5.228215] ehci-pci 0000:00:12.2: debug port 1
443[ 5.228325] ehci-pci 0000:00:12.2: irq 17, io mem 0xf7f04000
444[ 5.243757] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
445[ 5.244070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
446[ 5.244075] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
447[ 5.244080] usb usb1: Product: EHCI Host Controller
448[ 5.244084] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
449[ 5.244088] usb usb1: SerialNumber: 0000:00:12.2
450[ 5.244638] hub 1-0:1.0: USB hub found
451[ 5.244671] hub 1-0:1.0: 5 ports detected
452[ 5.245709] ehci-pci 0000:00:13.2: EHCI Host Controller
453[ 5.245730] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
454[ 5.245742] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
455[ 5.245806] ehci-pci 0000:00:13.2: debug port 1
456[ 5.245881] ehci-pci 0000:00:13.2: irq 17, io mem 0xf7f05000
457[ 5.259759] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
458[ 5.259966] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
459[ 5.259972] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
460[ 5.259976] usb usb2: Product: EHCI Host Controller
461[ 5.259980] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
462[ 5.259984] usb usb2: SerialNumber: 0000:00:13.2
463[ 5.260442] hub 2-0:1.0: USB hub found
464[ 5.260471] hub 2-0:1.0: 5 ports detected
465[ 5.261491] ehci-pci 0000:00:16.2: EHCI Host Controller
466[ 5.261510] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
467[ 5.261522] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
468[ 5.261586] ehci-pci 0000:00:16.2: debug port 1
469[ 5.261659] ehci-pci 0000:00:16.2: irq 17, io mem 0xf7f06000
470[ 5.275755] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
471[ 5.275957] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
472[ 5.275963] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
473[ 5.275967] usb usb3: Product: EHCI Host Controller
474[ 5.275971] usb usb3: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
475[ 5.275975] usb usb3: SerialNumber: 0000:00:16.2
476[ 5.276401] hub 3-0:1.0: USB hub found
477[ 5.276426] hub 3-0:1.0: 4 ports detected
478[ 5.277874] ohci-pci: OHCI PCI platform driver
479[ 5.278370] ohci-pci 0000:00:12.0: OHCI PCI host controller
480[ 5.278391] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
481[ 5.278535] ohci-pci 0000:00:12.0: irq 18, io mem 0xf7f00000
482[ 5.292009] r8169 0000:01:00.0 enp1s0: renamed from eth0
483[ 5.314317] r8169 0000:02:00.0 enp2s0: renamed from eth1
484[ 5.344028] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
485[ 5.344036] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
486[ 5.344041] usb usb4: Product: OHCI PCI host controller
487[ 5.344045] usb usb4: Manufacturer: Linux 4.9.0-8-amd64 ohci_hcd
488[ 5.344049] usb usb4: SerialNumber: 0000:00:12.0
489[ 5.344532] hub 4-0:1.0: USB hub found
490[ 5.345291] hub 4-0:1.0: 5 ports detected
491[ 5.346343] ohci-pci 0000:00:13.0: OHCI PCI host controller
492[ 5.346361] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
493[ 5.346425] ohci-pci 0000:00:13.0: irq 18, io mem 0xf7f01000
494[ 5.380811] r8169 0000:03:00.0 enp3s0: renamed from eth2
495[ 5.408022] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
496[ 5.408030] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
497[ 5.408034] usb usb5: Product: OHCI PCI host controller
498[ 5.408038] usb usb5: Manufacturer: Linux 4.9.0-8-amd64 ohci_hcd
499[ 5.408042] usb usb5: SerialNumber: 0000:00:13.0
500[ 5.409235] hub 5-0:1.0: USB hub found
501[ 5.409312] hub 5-0:1.0: 5 ports detected
502[ 5.410265] ohci-pci 0000:00:16.0: OHCI PCI host controller
503[ 5.410285] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
504[ 5.410354] ohci-pci 0000:00:16.0: irq 18, io mem 0xf7f02000
505[ 5.472174] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
506[ 5.472182] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
507[ 5.472187] usb usb6: Product: OHCI PCI host controller
508[ 5.472191] usb usb6: Manufacturer: Linux 4.9.0-8-amd64 ohci_hcd
509[ 5.472195] usb usb6: SerialNumber: 0000:00:16.0
510[ 5.473055] hub 6-0:1.0: USB hub found
511[ 5.473087] hub 6-0:1.0: 4 ports detected
512[ 5.541497] ata1: SATA link down (SStatus 0 SControl 300)
513[ 5.541996] ata2: SATA link down (SStatus 0 SControl 300)
514[ 5.544785] ata4: SATA link down (SStatus 0 SControl 300)
515[ 5.545874] ata3: SATA link down (SStatus 0 SControl 300)
516[ 5.545935] ata5: SATA link down (SStatus 0 SControl 300)
517[ 5.546014] ata6: SATA link down (SStatus 0 SControl 300)
518[ 5.603915] usb 3-1: new high-speed USB device number 2 using ehci-pci
519[ 5.754989] usb 3-1: New USB device found, idVendor=058f, idProduct=6366
520[ 5.754999] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
521[ 5.755004] usb 3-1: Product: Flash Card Reader/Writer
522[ 5.755009] usb 3-1: Manufacturer: Generic
523[ 5.755014] usb 3-1: SerialNumber: 058F63666485
524[ 5.764244] usb-storage 3-1:1.0: USB Mass Storage device detected
525[ 5.764619] scsi host6: usb-storage 3-1:1.0
526[ 5.764872] usbcore: registered new interface driver usb-storage
527[ 5.765997] usbcore: registered new interface driver uas
528[ 6.778457] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
529[ 7.159204] sd 6:0:0:0: [sda] 15499264 512-byte logical blocks: (7.94 GB/7.39 GiB)
530[ 7.161942] sd 6:0:0:0: [sda] Write Protect is off
531[ 7.161954] sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00
532[ 7.165600] sd 6:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
533[ 7.180907] sda: sda1 sda2 < sda5 >
534[ 7.190957] sd 6:0:0:0: [sda] Attached SCSI removable disk
535[ 7.303445] random: fast init done
536[ 7.635039] PM: Starting manual resume from disk
537[ 7.635052] PM: Hibernation image partition 8:5 present
538[ 7.635054] PM: Looking for hibernation image.
539[ 7.637334] PM: Image not found (code -22)
540[ 7.637340] PM: Hibernation image not present or could not be loaded.
541[ 8.122624] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
542[ 9.144806] ip_tables: (C) 2000-2006 Netfilter Core Team
543[ 9.185554] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
544[ 9.186038] systemd[1]: Detected architecture x86-64.
545[ 9.188620] systemd[1]: Set hostname to <debian>.
546[ 9.898688] systemd[1]: Listening on udev Control Socket.
547[ 9.899047] systemd[1]: Listening on Journal Socket (/dev/log).
548[ 9.899187] systemd[1]: Listening on Journal Socket.
549[ 9.899377] systemd[1]: Listening on udev Kernel Socket.
550[ 9.899476] systemd[1]: Listening on Syslog Socket.
551[ 9.900050] systemd[1]: Created slice System Slice.
552[ 9.902228] systemd[1]: Mounting POSIX Message Queue File System...
553[ 10.133557] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
554[ 10.431084] systemd-journald[202]: Received request to flush runtime journal from PID 1
555[ 10.770989] acpi_cpufreq: overriding BIOS provided _PSD data
556[ 10.875817] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
557[ 10.875832] ACPI: Power Button [PWRB]
558[ 10.876031] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
559[ 10.876038] ACPI: Power Button [PWRF]
560[ 11.112266] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
561[ 11.112452] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
562[ 11.112461] sp5100_tco: I/O address 0x0cd6 already in use
563[ 11.281145] input: PC Speaker as /devices/platform/pcspkr/input/input2
564[ 11.302814] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
565[ 11.348974] sd 6:0:0:0: Attached scsi generic sg0 type 0
566[ 11.426125] random: crng init done
567[ 11.426135] random: 7 urandom warning(s) missed due to ratelimiting
568[ 11.881457] kvm: Nested Virtualization enabled
569[ 11.881466] kvm: Nested Paging enabled
570[ 12.102774] Adding 2075644k swap on /dev/sda5. Priority:-1 extents:1 across:2075644k FS
571[ 12.315986] r8169 0000:01:00.0: firmware: failed to load rtl_nic/rtl8168e-2.fw (-2)
572[ 12.323738] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
573[ 12.323751] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
574[ 12.369828] r8169 0000:01:00.0 enp1s0: link down
575[ 12.369859] r8169 0000:01:00.0 enp1s0: link down
576[ 12.369953] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
577[ 14.551468] r8169 0000:01:00.0 enp1s0: link up
578[ 14.551499] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready