blob: af7a0ebd85096ed2dc5cac6e3c47774522aa360e [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +00001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +00005[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +00006[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000010[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000013[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000015[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-441-g1a38374-dirty 12/01/2015
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000016[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000019[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000020[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000026[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F4000000 mask FFFFFC000000 write-combining
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000029[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000034[ 0.000000] TOM2: 0000000180000000 aka 6144M
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000035[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000036[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000038[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000039[ 0.000000] Using GB pages for direct mapping
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000040[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000045[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000052[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000053[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000057[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000060[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7B10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000072[ 0.000000] ACPI: Local APIC address 0xfee00000
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000073[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000081[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000084[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000085[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000089[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000094[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +000097[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +000098[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000101[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048377
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000109[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000116[ 0.000000] ACPI: Local APIC address 0xfee00000
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000151[ 0.000000] Booting paravirtualized kernel on bare hardware
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000157[ 0.000000] Policy zone: Normal
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000162[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
163[ 0.000000] AGP: Node 1: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
164[ 0.000000] Memory: 5083036K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 159048K reserved)
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000165[ 0.000000] Hierarchical RCU implementation.
166[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000167[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
168[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
169[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000170[ 0.000000] spurious 8259A interrupt: IRQ7.
171[ 0.000000] Console: colour *CGA 80x25
172[ 0.000000] console [ttyS0] enabled
173[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
174[ 0.000000] hpet clockevent registered
175[ 0.000000] tsc: Fast TSC calibration using PIT
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000176[ 0.000000] tsc: Detected 1909.921 MHz processor
177[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.84 BogoMIPS (lpj=7639684)
178[ 0.010795] pid_max: default: 32768 minimum: 301
179[ 0.015451] ACPI: Core revision 20140424
180[ 0.021828] ACPI: All ACPI Tables successfully acquired
181[ 0.027180] Security Framework initialized
182[ 0.031305] AppArmor: AppArmor disabled by boot time parameter
183[ 0.037140] Yama: disabled by default; enable with sysctl kernel.yama.*
184[ 0.044894] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
185[ 0.058118] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
186[ 0.067897] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
187[ 0.074799] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
188[ 0.082651] Initializing cgroup subsys memory
189[ 0.087028] Initializing cgroup subsys devices
190[ 0.091490] Initializing cgroup subsys freezer
191[ 0.095952] Initializing cgroup subsys net_cls
192[ 0.100411] Initializing cgroup subsys blkio
193[ 0.104706] Initializing cgroup subsys perf_event
194[ 0.109423] Initializing cgroup subsys net_prio
195[ 0.114003] tseg: 0000000000
196[ 0.114014] CPU: Physical Processor ID: 0
197[ 0.118043] CPU: Processor Core ID: 0
198[ 0.121725] mce: CPU supports 6 MCE banks
199[ 0.125751] LVT offset 0 assigned for vector 0xf9
200[ 0.130482] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
201Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Raptor Engineering Automated Coreboot Test Standeee617c2015-12-01 16:10:21 +0000202tlb_flushall_shift: 6
Raptor Engineering Automated Coreboot Test Standd4370d72015-12-01 16:11:15 +0000203[ 0.145819] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
204[ 0.154826] ftrace: allocating 21601 entries in 85 pages
205[ 0.170201] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
206[ 0.215721] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
207[ 0.332510] Performance Events: AMD PMU driver.
208[ 0.337088] ... version: 0
209[ 0.341103] ... bit width: 48
210[ 0.345204] ... generic registers: 4
211[ 0.349220] ... value mask: 0000ffffffffffff
212[ 0.354530] ... max period: 00007fffffffffff
213[ 0.359849] ... fixed-purpose events: 0
214[ 0.363860] ... event mask: 000000000000000f
215[ 0.371772] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
216[ 0.379977] x86: Booting SMP configuration:
217[ 0.384174] .... node #0, CPUs: #1 #2 #3
218[ 0.428520] .... node #1, CPUs: #4 #5 #6 #7
219[ 0.581191] x86: Booted up 2 nodes, 8 CPUs
220[ 0.585488] smpboot: Total of 8 processors activated (30558.59 BogoMIPS)
221[ 0.597981] devtmpfs: initialized
222[ 0.609898] pinctrl core: initialized pinctrl subsystem
223[ 0.615291] NET: Registered protocol family 16
224[ 0.619956] cpuidle: using governor ladder
225[ 0.624056] cpuidle: using governor menu
226[ 0.627989] node 0 link 1: io port [1000, 3fff]
227[ 0.627992] TOM: 00000000c0000000 aka 3072M
228[ 0.632186] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
229[ 0.632190] node 0 link 1: mmio [fc000000, fc3fffff]
230[ 0.632193] node 0 link 1: mmio [f4000000, f7ffffff]
231[ 0.632196] TOM2: 0000000180000000 aka 6144M
232[ 0.636474] bus: [bus 00-05] on node 0 link 1
233[ 0.636476] bus: 00 [io 0x0000-0xffff]
234[ 0.636478] bus: 00 [mem 0xf8000000-0xffffffff]
235[ 0.636480] bus: 00 [mem 0xd0000000-0xf7ffffff]
236[ 0.636481] bus: 00 [mem 0x180000000-0xfcffffffff]
237[ 0.636586] ACPI: bus type PCI registered
238[ 0.640607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
239[ 0.647218] PCI: Using configuration type 1 for base access
240[ 0.652797] PCI: Using configuration type 1 for extended access
241[ 0.669322] ACPI: Added _OSI(Module Device)
242[ 0.673515] ACPI: Added _OSI(Processor Device)
243[ 0.677965] ACPI: Added _OSI(3.0 _SCP Extensions)
244[ 0.682676] ACPI: Added _OSI(Processor Aggregator Device)
245[ 0.691706] ACPI: Interpreter enabled
246[ 0.695391] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
247[ 0.704656] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
248[ 0.713919] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
249[ 0.723198] ACPI: (supports S0 S1 S5)
250[ 0.726871] ACPI: Using IOAPIC for interrupt routing
251[ 0.731889] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
252[ 0.760383] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
253[ 0.766574] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
254[ 0.774790] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
255[ 0.811677] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
256[ 0.821701] PCI host bridge to bus 0000:00
257[ 0.825804] pci_bus 0000:00: root bus resource [bus 00-05]
258[ 0.831295] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
259[ 0.837479] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
260[ 0.844358] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xf7ffffff]
261[ 0.851229] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
262[ 0.858107] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
263[ 0.864297] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
264[ 0.864485] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
265[ 0.864492] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
266[ 0.864625] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
267[ 0.864635] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
268[ 0.864654] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
269[ 0.864674] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
270[ 0.864701] pci 0000:00:01.1: PME# supported from D3hot D3cold
271[ 0.864813] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
272[ 0.864838] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
273[ 0.864875] pci 0000:00:02.0: supports D1 D2
274[ 0.864877] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
275[ 0.864930] pci 0000:00:02.0: System wakeup disabled by ACPI
276[ 0.870652] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
277[ 0.870661] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
278[ 0.870711] pci 0000:00:02.1: supports D1 D2
279[ 0.870721] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
280[ 0.870769] pci 0000:00:02.1: System wakeup disabled by ACPI
281[ 0.876494] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
282[ 0.876529] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
283[ 0.876549] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
284[ 0.883684] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
285[ 0.890216] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
286[ 0.897355] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
287[ 0.903991] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
288[ 0.904003] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
289[ 0.904007] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
290[ 0.904012] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
291[ 0.904016] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
292[ 0.904021] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
293[ 0.904026] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
294[ 0.904183] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
295[ 0.904190] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
296[ 0.904195] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
297[ 0.904200] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
298[ 0.904204] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
299[ 0.904209] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
300[ 0.904214] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
301[ 0.904360] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
302[ 0.904456] pci 0000:00:09.0: System wakeup disabled by ACPI
303[ 0.910177] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
304[ 0.910226] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
305[ 0.910279] pci 0000:00:0b.0: System wakeup disabled by ACPI
306[ 0.915996] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
307[ 0.916052] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
308[ 0.916105] pci 0000:00:0c.0: System wakeup disabled by ACPI
309[ 0.921831] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
310[ 0.921881] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
311[ 0.921934] pci 0000:00:0d.0: System wakeup disabled by ACPI
312[ 0.927656] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
313[ 0.927705] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
314[ 0.927753] pci 0000:00:0e.0: System wakeup disabled by ACPI
315[ 0.933486] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
316[ 0.933621] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
317[ 0.933819] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
318[ 0.933964] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
319[ 0.934080] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
320[ 0.934193] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
321[ 0.934363] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
322[ 0.934485] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
323[ 0.934620] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
324[ 0.934771] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
325[ 0.935029] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
326[ 0.935049] pci 0000:01:04.0: reg 0x10: [mem 0xf4000000-0xf7ffffff pref]
327[ 0.935068] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
328[ 0.935081] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
329[ 0.935134] pci 0000:01:04.0: supports D1 D2
330[ 0.935246] pci 0000:00:09.0: PCI bridge to [bus 01]
331[ 0.940224] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
332[ 0.940228] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
333[ 0.940231] pci 0000:00:09.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
334[ 0.940349] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
335[ 0.940383] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
336[ 0.940418] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref]
337[ 0.940501] pci 0000:02:00.0: PME# supported from D3hot D3cold
338[ 0.940603] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
339[ 0.950608] pci 0000:00:0b.0: PCI bridge to [bus 02]
340[ 0.955577] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
341[ 0.955683] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
342[ 0.955721] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
343[ 0.955831] pci 0000:03:00.0: PME# supported from D3hot D3cold
344[ 0.955927] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
345[ 0.965925] pci 0000:00:0c.0: PCI bridge to [bus 03]
346[ 0.970894] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
347[ 0.970967] pci 0000:00:0d.0: PCI bridge to [bus 04]
348[ 0.975997] pci 0000:00:0e.0: PCI bridge to [bus 05]
349[ 0.980984] pci_bus 0000:00: on NUMA node 0
350[ 0.981086] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
351[ 0.987231] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
352[ 0.993407] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
353[ 1.000722] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
354[ 1.008010] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
355[ 1.015320] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
356[ 1.022635] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
357[ 1.028769] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
358[ 1.034919] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
359[ 1.042229] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
360[ 1.049542] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
361[ 1.056871] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
362[ 1.063005] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
363[ 1.069148] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
364[ 1.076447] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
365[ 1.083754] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
366[ 1.091061] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
367[ 1.099589] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
368[ 1.106054] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
369[ 1.112529] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
370[ 1.119000] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
371[ 1.125790] ACPI: Enabled 1 GPEs in block 00 to 1F
372[ 1.130915] vgaarb: setting as boot device: PCI:0000:01:04.0
373[ 1.136584] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
374[ 1.144681] vgaarb: loaded
375[ 1.147395] vgaarb: bridge control possible 0000:01:04.0
376[ 1.152874] PCI: Using ACPI for IRQ routing
377[ 1.157070] PCI: pci_cache_line_size set to 64 bytes
378[ 1.157126] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
379[ 1.157130] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
380[ 1.157463] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
381[ 1.164521] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
382[ 1.169581] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
383[ 1.178297] Switched to clocksource hpet
384[ 1.193829] pnp: PnP ACPI init
385[ 1.196953] ACPI: bus type PNP registered
386[ 1.201496] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
387[ 1.201585] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
388[ 1.201669] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
389[ 1.201766] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
390[ 1.201804] pnp 00:04: [dma 2]
391[ 1.201851] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
392[ 1.201873] pnp: PnP ACPI: found 5 devices
393[ 1.205983] ACPI: bus type PNP unregistered
394[ 1.218008] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window
395[ 1.227961] pci 0000:00:09.0: PCI bridge to [bus 01]
396[ 1.232938] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
397[ 1.239035] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
398[ 1.245828] pci 0000:00:09.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
399[ 1.253059] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
400[ 1.260288] pci 0000:00:0b.0: PCI bridge to [bus 02]
401[ 1.265260] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
402[ 1.272053] pci 0000:00:0c.0: PCI bridge to [bus 03]
403[ 1.277025] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
404[ 1.283818] pci 0000:00:0d.0: PCI bridge to [bus 04]
405[ 1.288795] pci 0000:00:0e.0: PCI bridge to [bus 05]
406[ 1.293770] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
407[ 1.293773] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
408[ 1.293775] pci_bus 0000:00: resource 6 [mem 0xf4000000-0xf7ffffff]
409[ 1.293778] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
410[ 1.293780] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
411[ 1.293783] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
412[ 1.293786] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
413[ 1.293788] pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf7ffffff pref]
414[ 1.293792] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
415[ 1.293795] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
416[ 1.293944] NET: Registered protocol family 2
417[ 1.298843] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
418[ 1.306537] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
419[ 1.313879] TCP: Hash tables configured (established 65536 bind 65536)
420[ 1.320481] TCP: reno registered
421[ 1.323739] UDP hash table entries: 4096 (order: 5, 131072 bytes)
422[ 1.329947] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
423[ 1.336724] NET: Registered protocol family 1
424[ 1.341476] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
425[ 1.347559] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
426[ 1.353463] pci 0000:00:00.0: Found enabled HT MSI Mapping
427[ 1.358997] pci 0000:00:00.0: Found enabled HT MSI Mapping
428[ 1.364497] pci 0000:00:0b.0: Found disabled HT MSI Mapping
429[ 1.370079] pci 0000:00:00.0: Found enabled HT MSI Mapping
430[ 1.375609] pci 0000:00:00.0: Found enabled HT MSI Mapping
431[ 1.381113] pci 0000:00:0c.0: Found disabled HT MSI Mapping
432[ 1.386694] pci 0000:00:00.0: Found enabled HT MSI Mapping
433[ 1.392221] pci 0000:00:00.0: Found enabled HT MSI Mapping
434[ 1.397726] pci 0000:00:0d.0: Found disabled HT MSI Mapping
435[ 1.403301] pci 0000:00:00.0: Found enabled HT MSI Mapping
436[ 1.408854] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.414357] pci 0000:00:0e.0: Found disabled HT MSI Mapping
438[ 1.419927] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.425457] pci 0000:01:04.0: Video device with shadowed ROM
440[ 1.425466] PCI: CLS 64 bytes, default 64
441[ 1.425573] Unpacking initramfs...
442[ 1.658515] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
443[ 1.666392] PCI-DMA: Disabling AGP.
444[ 1.671494] PCI-DMA: aperture base @ f8000000 size 65536 KB
445[ 1.677074] init_memory_mapping: [mem 0xf8000000-0xfbffffff]
446[ 1.682736] [mem 0xf8000000-0xfbffffff] page 2M
447[ 1.682759] PCI-DMA: using GART IOMMU.
448[ 1.686530] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
449[ 1.698865] platform rtc_cmos: registered platform RTC device (no PNP device found)
450[ 1.707053] microcode: CPU0: patch_level=0x01000084
451[ 1.711946] microcode: CPU1: patch_level=0x01000084
452[ 1.716847] microcode: CPU2: patch_level=0x01000084
453[ 1.721751] microcode: CPU3: patch_level=0x01000084
454[ 1.726655] microcode: CPU4: patch_level=0x01000084
455[ 1.731545] microcode: CPU5: patch_level=0x01000084
456[ 1.736439] microcode: CPU6: patch_level=0x01000084
457[ 1.741336] microcode: CPU7: patch_level=0x01000084
458[ 1.746327] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
459[ 1.755129] LVT offset 1 assigned for vector 0x400
460[ 1.759939] IBS: LVT offset 1 assigned
461[ 1.763730] perf: AMD IBS detected (0x00000007)
462[ 1.768880] futex hash table entries: 2048 (order: 5, 131072 bytes)
463[ 1.775263] audit: initializing netlink subsys (disabled)
464[ 1.780694] audit: type=2000 audit(1448986161.524:1): initialized
465[ 1.787573] HugeTLB registered 2 MB page size, pre-allocated 0 pages
466[ 1.793978] zbud: loaded
467[ 1.796885] VFS: Disk quotas dquot_6.5.2
468[ 1.800847] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
469[ 1.807401] msgmni has been set to 10073
470[ 1.811873] alg: No test for stdrng (krng)
471[ 1.816038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
472[ 1.823538] io scheduler noop registered
473[ 1.827475] io scheduler deadline registered
474[ 1.831822] io scheduler cfq registered (default)
475[ 1.836739] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
476[ 1.836863] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
477[ 1.836978] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
478[ 1.837103] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
479[ 1.837268] aer 0000:00:0b.0:pcie02: service driver aer loaded
480[ 1.837295] aer 0000:00:0c.0:pcie02: service driver aer loaded
481[ 1.837321] aer 0000:00:0d.0:pcie02: service driver aer loaded
482[ 1.837346] aer 0000:00:0e.0:pcie02: service driver aer loaded
483[ 1.837367] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
484[ 1.844337] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
485[ 1.850873] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
486[ 1.850883] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
487[ 1.857846] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
488[ 1.864378] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
489[ 1.864387] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
490[ 1.871353] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
491[ 1.871365] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
492[ 1.878327] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
493[ 1.878356] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
494[ 1.883963] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
495[ 1.890699] GHES: HEST is not enabled!
496[ 1.894588] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
497[ 1.921180] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
498[ 1.948857] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
499[ 1.956793] Linux agpgart interface v0.103
500[ 1.961111] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
501[ 1.971466] serio: i8042 KBD port at 0x60,0x64 irq 1
502[ 1.976458] serio: i8042 AUX port at 0x60,0x64 irq 12
503[ 1.981751] mousedev: PS/2 mouse device common for all mice
504[ 1.987426] rtc_cmos rtc_cmos: RTC can wake from S4
505[ 1.992535] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
506[ 1.998942] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
507[ 2.006883] ledtrig-cpu: registered to indicate activity on CPUs
508[ 2.013079] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
509[ 2.019531] AMD IOMMUv2 functionality not available on this system
510[ 2.025899] TCP: cubic registered
511[ 2.029370] NET: Registered protocol family 10
512[ 2.034262] mip6: Mobile IPv6
513[ 2.035613] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
514[ 2.045853] NET: Registered protocol family 17
515[ 2.050310] mpls_gso: MPLS GSO support
516[ 2.054882] registered taskstats version 1
517[ 2.059770] rtc_cmos rtc_cmos: setting system clock to 2015-12-01 16:09:23 UTC (1448986163)
518[ 2.068220] PM: Hibernation image not present or could not be loaded.
519[ 2.070053] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
520[ 2.077886] Write protecting the kernel read-only data: 8192k
521[ 2.087125] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
522[ 2.095739] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
523[ 2.119931] systemd-udevd[99]: starting version 215
524[ 2.125685] random: systemd-udevd urandom read with 3 bits of entropy available
525[ 2.155680] ACPI: bus type USB registered
526[ 2.159948] usbcore: registered new interface driver usbfs
527[ 2.165546] usbcore: registered new interface driver hub
528[ 2.171094] usbcore: registered new device driver usb
529[ 2.171102] pps_core: LinuxPPS API ver. 1 registered
530[ 2.171104] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
531[ 2.190907] PTP clock support registered
532[ 2.195136] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
533[ 2.202123] tg3.c:v3.137 (May 11, 2014)
534[ 2.206013] tg3 0000:02:00.0: enabling device (0004 -> 0006)
535[ 2.211844] ehci-pci: EHCI PCI platform driver
536[ 2.211940] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
537[ 2.222397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
538[ 2.222445] ehci-pci 0000:00:02.1: EHCI Host Controller
539[ 2.222464] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
540[ 2.222483] ehci-pci 0000:00:02.1: debug port 1
541[ 2.222530] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
542[ 2.222558] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
543[ 2.233975] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
544[ 2.234045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
545[ 2.234046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
546[ 2.234048] usb usb1: Product: EHCI Host Controller
547[ 2.234049] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
548[ 2.234051] usb usb1: SerialNumber: 0000:00:02.1
549[ 2.234352] hub 1-0:1.0: USB hub found
550[ 2.234365] hub 1-0:1.0: 10 ports detected
551[ 2.295409] ohci-pci: OHCI PCI platform driver
552[ 2.300126] ohci-pci 0000:00:02.0: OHCI PCI host controller
553[ 2.305734] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
554[ 2.313195] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
555[ 2.329107] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
556[ 2.339371] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
557[ 2.349111] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
558[ 2.356945] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
559[ 2.363770] tg3 0000:03:00.0: enabling device (0004 -> 0006)
560[ 2.369578] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
561[ 2.375956] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
562[ 2.382753] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
563[ 2.389976] usb usb2: Product: OHCI PCI host controller
564[ 2.395210] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
565[ 2.401308] usb usb2: SerialNumber: 0000:00:02.0
566[ 2.406140] hub 2-0:1.0: USB hub found
567[ 2.409895] hub 2-0:1.0: 10 ports detected
568[ 2.458379] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
569[ 2.468637] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
570[ 2.478375] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
571[ 2.486204] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
572[ 2.500497] FS-Cache: Loaded
573[ 2.508340] RPC: Registered named UNIX socket transport module.
574[ 2.514935] RPC: Registered udp transport module.
575[ 2.521015] RPC: Registered tcp transport module.
576[ 2.527108] RPC: Registered tcp NFSv4.1 backchannel transport module.
577[ 2.539690] FS-Cache: Netfs 'nfs' registered for caching
578[ 2.557745] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
579[ 2.605929] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
580[ 2.697792] tsc: Refined TSC clocksource calibration: 1909.786 MHz
581[ 3.701563] Switched to clocksource tsc
582[ 4.331719] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
583[ 4.338253] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
584[ 4.345135] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
585[ 5.074303] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
586[ 5.088313] systemd[1]: Detected architecture 'x86-64'.
587[ 5.309541] systemd[1]: Inserted module 'autofs4'
588[ 5.315686] systemd[1]: Set hostname to <cb-test-tgt>.
589[ 5.395455] random: nonblocking pool is initialized
590[ 5.558851] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
591[ 5.571570] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
592[ 5.586963] systemd[1]: Expecting device dev-ttyS0.device...
593[ 5.600921] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
594[ 5.608739] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
595[ 5.616343] systemd[1]: Starting Remote File Systems (Pre).
596[ 5.632829] systemd[1]: Reached target Remote File Systems (Pre).
597[ 5.638953] systemd[1]: Starting Encrypted Volumes.
598[ 5.652809] systemd[1]: Reached target Encrypted Volumes.
599[ 5.658277] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
600[ 5.680800] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
601[ 5.690228] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
602[ 5.698290] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
603[ 5.706217] systemd[1]: Starting Paths.
604[ 5.720797] systemd[1]: Reached target Paths.
605[ 5.725191] systemd[1]: Starting Swap.
606[ 5.736863] systemd[1]: Reached target Swap.
607[ 5.741208] systemd[1]: Starting Root Slice.
608[ 5.752770] systemd[1]: Created slice Root Slice.
609[ 5.757504] systemd[1]: Starting User and Session Slice.
610[ 5.772792] systemd[1]: Created slice User and Session Slice.
611[ 5.778562] systemd[1]: Starting Delayed Shutdown Socket.
612[ 5.792757] systemd[1]: Listening on Delayed Shutdown Socket.
613[ 5.798529] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
614[ 5.816758] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
615[ 5.823747] systemd[1]: Starting Journal Socket (/dev/log).
616[ 5.840747] systemd[1]: Listening on Journal Socket (/dev/log).
617[ 5.846715] systemd[1]: Starting udev Kernel Socket.
618[ 5.860733] systemd[1]: Listening on udev Kernel Socket.
619[ 5.866080] systemd[1]: Starting udev Control Socket.
620[ 5.880731] systemd[1]: Listening on udev Control Socket.
621[ 5.886167] systemd[1]: Starting Journal Socket.
622[ 5.900717] systemd[1]: Listening on Journal Socket.
623[ 5.905731] systemd[1]: Starting System Slice.
624[ 5.920709] systemd[1]: Created slice System Slice.
625[ 5.925616] systemd[1]: Starting system-getty.slice.
626[ 5.940704] systemd[1]: Created slice system-getty.slice.
627[ 5.946126] systemd[1]: Starting system-serial\x2dgetty.slice.
628[ 5.960702] systemd[1]: Created slice system-serial\x2dgetty.slice.
629[ 5.967019] systemd[1]: Starting Increase datagram queue length...
630[ 5.986182] systemd[1]: Starting udev Coldplug all Devices...
631[ 6.032848] systemd[1]: Starting Load Kernel Modules...
632[ 6.219212] systemd[1]: Started Set Up Additional Binary Formats.
633[ 6.225554] systemd[1]: Mounting Debug File System...
634[ 6.246455] systemd[1]: Starting Create list of required static device nodes for the current kernel...
635[ 6.270752] systemd[1]: Mounting POSIX Message Queue File System...
636[ 6.290299] systemd[1]: Mounting Huge Pages File System...
637[ 6.305923] systemd[1]: Starting Slices.
638[ 6.320588] systemd[1]: Reached target Slices.
639[ 6.325098] systemd[1]: Starting Remount Root and Kernel File Systems...
640[ 6.352640] systemd[1]: Mounted Huge Pages File System.
641[ 6.368558] systemd[1]: Mounted POSIX Message Queue File System.
642[ 6.384622] systemd[1]: Mounted Debug File System.
643[ 6.400557] systemd[1]: Started Increase datagram queue length.
644[ 6.416595] systemd[1]: Started Load Kernel Modules.
645[ 6.436583] systemd[1]: Started Create list of required static device nodes for the current kernel.
646[ 6.460593] systemd[1]: Started Remount Root and Kernel File Systems.
647[ 6.476569] systemd[1]: Started udev Coldplug all Devices.
648[ 6.522594] systemd[1]: Started Various fixups to make systemd work better on Debian.
649[ 6.530474] systemd[1]: Starting Load/Save Random Seed...
650[ 6.546099] systemd[1]: Starting Create Static Device Nodes in /dev...
651[ 6.565992] systemd[1]: Starting Apply Kernel Variables...
652[ 6.582194] systemd[1]: Mounted Configuration File System.
653[ 6.587792] systemd[1]: Mounted FUSE Control File System.
654[ 6.593213] systemd[1]: Starting Syslog Socket.
655[ 6.608529] systemd[1]: Listening on Syslog Socket.
656[ 6.613491] systemd[1]: Starting Sockets.
657[ 6.628527] systemd[1]: Reached target Sockets.
658[ 6.633130] systemd[1]: Starting Journal Service...
659[ 6.660539] systemd[1]: Started Journal Service.
660[ 6.797374] systemd-udevd[189]: starting version 215
661[ 7.066123] systemd-journald[188]: Received request to flush runtime journal from PID 1
662[ 7.481906] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
663[ 7.489822] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
664[ 7.497881] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
665[ 7.506242] EDAC MC: Ver: 3.0.0
666[ 7.541701] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
667[ 7.550086] ACPI: Power Button [PWRB]
668[ 7.550167] SCSI subsystem initialized
669[ 7.557684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
670[ 7.565097] ACPI: Power Button [PWRF]
671[ 7.603524] MCE: In-kernel MCE decoding enabled.
672[ 7.636063] FDC 0 is a post-1991 82077
673[ 7.649618] libata version 3.00 loaded.
674[ 7.649842] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
675[ 7.655046] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
676[ 7.683782] AMD64 EDAC driver v3.4.0
677[ 7.687551] EDAC amd64: DRAM ECC enabled.
678[ 7.687831] acpi-cpufreq: overriding BIOS provided _PSD data
679[ 7.697281] EDAC amd64: F10h detected (node 0).
680[ 7.701882] EDAC MC: DCT0 chip selects:
681[ 7.701898] EDAC amd64: MC: 0: 0MB 1: 0MB
682[ 7.706648] EDAC amd64: MC: 2: 0MB 3: 0MB
683[ 7.711400] EDAC amd64: MC: 4: 0MB 5: 0MB
684[ 7.716138] EDAC amd64: MC: 6: 1024MB 7: 1024MB
685[ 7.720871] EDAC MC: DCT1 chip selects:
686[ 7.720884] EDAC amd64: MC: 0: 0MB 1: 0MB
687[ 7.725626] EDAC amd64: MC: 2: 0MB 3: 0MB
688[ 7.730360] EDAC amd64: MC: 4: 0MB 5: 0MB
689[ 7.735089] EDAC amd64: MC: 6: 1024MB 7: 1024MB
690[ 7.739818] EDAC amd64: using x4 syndromes.
691[ 7.744008] EDAC amd64: MCT channel count: 2
692[ 7.748440] EDAC amd64: CS6: Registered DDR2 RAM
693[ 7.748745] input: PC Speaker as /devices/platform/pcspkr/input/input4
694[ 7.759663] EDAC amd64: CS7: Registered DDR2 RAM
695[ 7.764963] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
696[ 7.775986] EDAC amd64: DRAM ECC enabled.
697[ 7.780177] EDAC amd64: F10h detected (node 1).
698[ 7.784750] EDAC MC: DCT0 chip selects:
699[ 7.784752] EDAC amd64: MC: 0: 1024MB 1: 0MB
700[ 7.789463] EDAC amd64: MC: 2: 0MB 3: 0MB
701[ 7.794209] EDAC amd64: MC: 4: 0MB 5: 0MB
702[ 7.798940] EDAC amd64: MC: 6: 0MB 7: 0MB
703[ 7.803680] EDAC MC: DCT1 chip selects:
704[ 7.803682] EDAC amd64: MC: 0: 0MB 1: 0MB
705[ 7.808413] EDAC amd64: MC: 2: 0MB 3: 0MB
706[ 7.813147] EDAC amd64: MC: 4: 0MB 5: 0MB
707[ 7.817881] EDAC amd64: MC: 6: 0MB 7: 0MB
708[ 7.822619] EDAC amd64: using x4 syndromes.
709[ 7.826860] EDAC amd64: MCT channel count: 1
710[ 7.831256] EDAC amd64: CS0: Registered DDR2 RAM
711[ 7.836256] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
712[ 7.846266] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
713[ 7.846356] pata_amd 0000:00:06.0: version 0.4.1
714[ 7.849367] scsi0 : pata_amd
715[ 7.860298] scsi1 : pata_amd
716[ 7.864773] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
717[ 7.864837] kvm: Nested Virtualization enabled
718[ 7.864843] kvm: Nested Paging enabled
719[ 7.881025] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
720[ 7.889127] sata_nv 0000:00:07.0: version 3.5
721[ 7.889483] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
722[ 7.896629] scsi2 : sata_nv
723[ 7.899644] scsi3 : sata_nv
724[ 7.902546] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
725[ 7.909684] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
726[ 7.917323] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
727[ 7.923564] scsi4 : sata_nv
728[ 7.926551] scsi5 : sata_nv
729[ 7.929422] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
730[ 7.936561] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
731[ 8.227880] ata3: SATA link down (SStatus 0 SControl 300)
732[ 8.251884] ata5: SATA link down (SStatus 0 SControl 300)
733[ 8.543812] ata4: SATA link down (SStatus 0 SControl 300)
734[ 8.859698] ata6: SATA link down (SStatus 0 SControl 300)
735[ 38.641942] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****