blob: 9a61fa70576b8126cc5545a8b8058fd84a76c1c9 [file] [log] [blame]
rootf3573802018-05-24 22:40:27 -04001[ 0.000000] Linux version 4.9.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07)
2[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=5b850e2a-4044-425b-99c3-5beab6d79d3b ro
3[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
4[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
5[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
6[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
7[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
8[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
9[ 0.000000] e820: BIOS-provided physical RAM map:
10[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fd54fff] usable
14[ 0.000000] BIOS-e820: [mem 0x000000007fd55000-0x00000000829fffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
18[ 0.000000] NX (Execute Disable) protection: active
19[ 0.000000] SMBIOS 2.7 present.
20[ 0.000000] DMI: HP EliteBook 8770w/EliteBook 8770w, BIOS 4.8-167-g659f40bb34 05/24/2018
21[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
22[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
23[ 0.000000] e820: last_pfn = 0x47b600 max_arch_pfn = 0x400000000
24[ 0.000000] MTRR default type: uncachable
25[ 0.000000] MTRR fixed ranges enabled:
26[ 0.000000] 00000-9FFFF write-back
27[ 0.000000] A0000-BFFFF uncachable
28[ 0.000000] C0000-FFFFF write-back
29[ 0.000000] MTRR variable ranges enabled:
30[ 0.000000] 0 base 000000000 mask F80000000 write-back
31[ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
32[ 0.000000] 2 base 0E0000000 mask FFE000000 write-combining
33[ 0.000000] 3 base 100000000 mask F00000000 write-back
34[ 0.000000] 4 base 200000000 mask E00000000 write-back
35[ 0.000000] 5 base 400000000 mask F80000000 write-back
36[ 0.000000] 6 disabled
37[ 0.000000] 7 disabled
38[ 0.000000] 8 disabled
39[ 0.000000] 9 disabled
40[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
41[ 0.000000] e820: last_pfn = 0x7fd55 max_arch_pfn = 0x400000000
42[ 0.000000] Base memory trampoline at [ffff961b80099000] 99000 size 24576
43[ 0.000000] BRK [0x160d39000, 0x160d39fff] PGTABLE
44[ 0.000000] BRK [0x160d3a000, 0x160d3afff] PGTABLE
45[ 0.000000] BRK [0x160d3b000, 0x160d3bfff] PGTABLE
46[ 0.000000] BRK [0x160d3c000, 0x160d3cfff] PGTABLE
47[ 0.000000] BRK [0x160d3d000, 0x160d3dfff] PGTABLE
48[ 0.000000] BRK [0x160d3e000, 0x160d3efff] PGTABLE
49[ 0.000000] BRK [0x160d3f000, 0x160d3ffff] PGTABLE
50[ 0.000000] RAMDISK: [mem 0x35cd3000-0x36e60fff]
51[ 0.000000] ACPI: Early table checksum verification disabled
52[ 0.000000] ACPI: RSDP 0x00000000000F6790 000024 (v02 CORE )
53[ 0.000000] ACPI: XSDT 0x000000007FD7B0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
54[ 0.000000] ACPI: FACP 0x000000007FD7E6D0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
55[ 0.000000] ACPI: DSDT 0x000000007FD7B280 003447 (v03 COREv4 COREBOOT 20141018 INTL 20161222)
56[ 0.000000] ACPI: FACS 0x000000007FD7B240 000040
57[ 0.000000] ACPI: FACS 0x000000007FD7B240 000040
58[ 0.000000] ACPI: SSDT 0x000000007FD7E7D0 002DD3 (v02 CORE COREBOOT 0000002A CORE 0000002A)
59[ 0.000000] ACPI: MCFG 0x000000007FD815B0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000007FD815F0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000007FD81630 00008C (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DMAR 0x000000007FD816C0 000088 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: HPET 0x000000007FD81750 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: Local APIC address 0xfee00000
65[ 0.000000] No NUMA configuration found
66[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
67[ 0.000000] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff]
68[ 0.000000] Zone ranges:
69[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
70[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
71[ 0.000000] Normal [mem 0x0000000100000000-0x000000047b5fffff]
72[ 0.000000] Device empty
73[ 0.000000] Movable zone start for each node
74[ 0.000000] Early memory node ranges
75[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
76[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fd54fff]
77[ 0.000000] node 0: [mem 0x0000000100000000-0x000000047b5fffff]
78[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
79[ 0.000000] On node 0 totalpages: 4174579
80[ 0.000000] DMA zone: 64 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 8118 pages used for memmap
84[ 0.000000] DMA32 zone: 519509 pages, LIFO batch:31
85[ 0.000000] Normal zone: 57048 pages used for memmap
86[ 0.000000] Normal zone: 3651072 pages, LIFO batch:31
87[ 0.000000] ACPI: PM-Timer IO Port: 0x508
88[ 0.000000] ACPI: Local APIC address 0xfee00000
89[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ9 used by override.
94[ 0.000000] Using ACPI (MADT) for SMP configuration information
95[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
96[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
97[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
98[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
99[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x7fd55000-0x829fffff]
102[ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
103[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
104[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed8ffff]
105[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
106[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
107[ 0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
108[ 0.000000] Booting paravirtualized kernel on bare hardware
109[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
110[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
111[ 0.000000] percpu: Embedded 35 pages/cpu @ffff961ffb200000 s105304 r8192 d29864 u262144
112[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
113[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
114[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4109328
115[ 0.000000] Policy zone: Normal
116[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=5b850e2a-4044-425b-99c3-5beab6d79d3b ro
117[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
118[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
119[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
120[ 0.000000] Memory: 16335268K/16698316K available (6240K kernel code, 1159K rwdata, 2868K rodata, 1416K init, 688K bss, 363048K reserved, 0K cma-reserved)
121[ 0.000000] Kernel/User page tables isolation: enabled
122[ 0.000000] Hierarchical RCU implementation.
123[ 0.000000] Build-time adjustment of leaf fanout to 64.
124[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
125[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
126[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
127[ 0.000000] Console: colour dummy device 80x25
128[ 0.000000] console [tty0] enabled
129[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
130[ 0.000000] hpet clockevent registered
131[ 0.000000] tsc: Fast TSC calibration using PIT
132[ 0.000000] tsc: Detected 2593.980 MHz processor
133[ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.96 BogoMIPS (lpj=10375920)
134[ 0.000034] pid_max: default: 32768 minimum: 301
135[ 0.000052] ACPI: Core revision 20160831
136[ 0.002625] ACPI: 2 ACPI AML tables successfully acquired and loaded
137[ 0.002673] Security Framework initialized
138[ 0.002677] Yama: disabled by default; enable with sysctl kernel.yama.*
139[ 0.002685] AppArmor: AppArmor disabled by boot time parameter
140[ 0.003417] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
141[ 0.007083] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
142[ 0.008750] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
143[ 0.008767] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
144[ 0.009064] CPU: Physical Processor ID: 0
145[ 0.009068] CPU: Processor Core ID: 0
146[ 0.009077] mce: CPU supports 9 MCE banks
147[ 0.009089] mce: [Hardware Error]: Machine check events logged
148[ 0.009097] CPU0: Thermal monitoring enabled (TM1)
149[ 0.009111] process: using mwait in idle threads
150[ 0.009117] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
151[ 0.009120] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
152[ 0.009124] Spectre V2 : Mitigation: Full generic retpoline
153[ 0.009127] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
154[ 0.009132] Spectre V2 : Enabling Restricted Speculation for firmware calls
155[ 0.009624] Freeing SMP alternatives memory: 24K
156[ 0.105831] ftrace: allocating 25239 entries in 99 pages
157[ 0.127833] smpboot: Max logical packages: 2
158[ 0.127841] DMAR: Host address width 36
159[ 0.127844] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
160[ 0.127855] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
161[ 0.127861] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
162[ 0.127865] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
163[ 0.127868] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
164[ 0.128037] DMAR-IR: Enabled IRQ remapping in x2apic mode
165[ 0.128041] x2apic enabled
166[ 0.128048] Switched APIC routing to cluster x2apic.
167[ 0.128503] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
168[ 0.168195] TSC deadline timer enabled
169[ 0.168198] smpboot: CPU0: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
170[ 0.168207] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
171[ 0.168236] ... version: 3
172[ 0.168239] ... bit width: 48
173[ 0.168242] ... generic registers: 4
174[ 0.168245] ... value mask: 0000ffffffffffff
175[ 0.168249] ... max period: 00007fffffffffff
176[ 0.168252] ... fixed-purpose events: 3
177[ 0.168255] ... event mask: 000000070000000f
178[ 0.168840] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
179[ 0.168950] x86: Booting SMP configuration:
180[ 0.168954] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
181[ 0.186264] x86: Booted up 1 node, 8 CPUs
182[ 0.186273] smpboot: Total of 8 processors activated (41503.68 BogoMIPS)
183[ 0.193087] devtmpfs: initialized
184[ 0.193157] x86/mm: Memory block size: 128MB
185[ 0.196539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
186[ 0.196557] futex hash table entries: 2048 (order: 5, 131072 bytes)
187[ 0.196617] pinctrl core: initialized pinctrl subsystem
188[ 0.196731] NET: Registered protocol family 16
189[ 0.212617] cpuidle: using governor ladder
190[ 0.228626] cpuidle: using governor menu
191[ 0.228678] ACPI: bus type PCI registered
192[ 0.228682] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
193[ 0.228752] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
194[ 0.228759] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
195[ 0.228770] PCI: Using configuration type 1 for base access
196[ 0.228823] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
197[ 0.244777] HugeTLB registered 2 MB page size, pre-allocated 0 pages
198[ 0.245015] ACPI: Added _OSI(Module Device)
199[ 0.245021] ACPI: Added _OSI(Processor Device)
200[ 0.245024] ACPI: Added _OSI(3.0 _SCP Extensions)
201[ 0.245028] ACPI: Added _OSI(Processor Aggregator Device)
202[ 0.245163] ACPI: Executed 1 blocks of module-level executable AML code
203[ 0.247430] ACPI Error: No handler for Region [ECRM] (ffff961fea9b9360) [EmbeddedControl] (20160831/evregion-166)
204[ 0.247439] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299)
205[ 0.247447] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff961fea9ba5c8), AE_NOT_EXIST (20160831/psparse-543)
206[ 0.247999] ACPI : EC: EC started
207[ 0.248003] ACPI : EC: interrupt blocked
208[ 0.259761] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
209[ 0.259766] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
210[ 0.259772] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
211[ 0.259777] ACPI: Interpreter enabled
212[ 0.259795] ACPI: (supports S0 S3 S4 S5)
213[ 0.259798] ACPI: Using IOAPIC for interrupt routing
214[ 0.259819] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
215[ 0.263113] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
216[ 0.263121] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
217[ 0.263173] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
218[ 0.263187] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
219[ 0.263246] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
220[ 0.263414] PCI host bridge to bus 0000:00
221[ 0.263419] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
222[ 0.263423] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
223[ 0.263428] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
224[ 0.263433] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
225[ 0.263439] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
226[ 0.263445] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
227[ 0.263451] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
228[ 0.263457] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
229[ 0.263462] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
230[ 0.263468] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
231[ 0.263474] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
232[ 0.263480] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
233[ 0.263485] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
234[ 0.263491] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
235[ 0.263497] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
236[ 0.263503] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
237[ 0.263509] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
238[ 0.263515] pci_bus 0000:00: root bus resource [bus 00-ff]
239[ 0.263525] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
240[ 0.263617] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
241[ 0.263648] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
242[ 0.263725] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
243[ 0.263734] pci 0000:00:04.0: reg 0x10: [mem 0xe5a30000-0xe5a37fff 64bit]
244[ 0.263835] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
245[ 0.263856] pci 0000:00:14.0: reg 0x10: [mem 0xe5a20000-0xe5a2ffff 64bit]
246[ 0.263924] pci 0000:00:14.0: PME# supported from D3hot D3cold
247[ 0.263963] pci 0000:00:14.0: System wakeup disabled by ACPI
248[ 0.264035] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
249[ 0.264114] pci 0000:00:16.0: reg 0x10: [mem 0xe5a40000-0xe5a4000f 64bit]
250[ 0.264448] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
251[ 0.264549] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
252[ 0.264565] pci 0000:00:19.0: reg 0x10: [mem 0xe5a00000-0xe5a1ffff]
253[ 0.264573] pci 0000:00:19.0: reg 0x14: [mem 0xe5a3c000-0xe5a3cfff]
254[ 0.264582] pci 0000:00:19.0: reg 0x18: [io 0x5000-0x501f]
255[ 0.264647] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
256[ 0.264721] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
257[ 0.264739] pci 0000:00:1a.0: reg 0x10: [mem 0xe5a3e000-0xe5a3e3ff]
258[ 0.264823] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
259[ 0.264863] pci 0000:00:1a.0: System wakeup disabled by ACPI
260[ 0.264908] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
261[ 0.264925] pci 0000:00:1b.0: reg 0x10: [mem 0xe5a38000-0xe5a3bfff 64bit]
262[ 0.264997] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
263[ 0.265040] pci 0000:00:1b.0: System wakeup disabled by ACPI
264[ 0.265083] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
265[ 0.265152] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
266[ 0.265232] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
267[ 0.265308] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
268[ 0.265387] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
269[ 0.265463] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
270[ 0.265541] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
271[ 0.265615] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
272[ 0.265695] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
273[ 0.265769] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
274[ 0.265851] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
275[ 0.265869] pci 0000:00:1d.0: reg 0x10: [mem 0xe5a3f000-0xe5a3f3ff]
276[ 0.265953] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
277[ 0.265992] pci 0000:00:1d.0: System wakeup disabled by ACPI
278[ 0.266034] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
279[ 0.266203] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
280[ 0.266220] pci 0000:00:1f.2: reg 0x10: [io 0x5040-0x5047]
281[ 0.266228] pci 0000:00:1f.2: reg 0x14: [io 0x5050-0x5053]
282[ 0.266237] pci 0000:00:1f.2: reg 0x18: [io 0x5048-0x504f]
283[ 0.266245] pci 0000:00:1f.2: reg 0x1c: [io 0x5054-0x5057]
284[ 0.266254] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
285[ 0.266262] pci 0000:00:1f.2: reg 0x24: [mem 0xe5a3d000-0xe5a3d7ff]
286[ 0.266307] pci 0000:00:1f.2: PME# supported from D3hot
287[ 0.266420] pci 0000:01:00.0: [10de:13d7] type 00 class 0x030000
288[ 0.266431] pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
289[ 0.266441] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
290[ 0.266451] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
291[ 0.266458] pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f]
292[ 0.266465] pci 0000:01:00.0: reg 0x30: [mem 0xe3000000-0xe307ffff pref]
293[ 0.266562] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
294[ 0.266573] pci 0000:01:00.1: reg 0x10: [mem 0xe3080000-0xe3083fff]
295[ 0.280676] pci 0000:00:01.0: PCI bridge to [bus 01]
296[ 0.280687] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
297[ 0.280699] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe30fffff]
298[ 0.280702] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
299[ 0.280749] pci 0000:00:1c.0: PCI bridge to [bus 02]
300[ 0.280824] pci 0000:00:1c.1: PCI bridge to [bus 03]
301[ 0.280831] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
302[ 0.280835] pci 0000:00:1c.1: bridge window [mem 0xe4800000-0xe4ffffff]
303[ 0.280841] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe47fffff 64bit pref]
304[ 0.280930] pci 0000:04:00.0: [197b:2380] type 00 class 0x0c0010
305[ 0.280967] pci 0000:04:00.0: reg 0x10: [mem 0xe3c10000-0xe3c107ff]
306[ 0.280990] pci 0000:04:00.0: reg 0x14: [mem 0xe3c11000-0xe3c110ff]
307[ 0.281286] pci 0000:04:00.1: [197b:2392] type 00 class 0x088000
308[ 0.281318] pci 0000:04:00.1: reg 0x10: [mem 0xe3c12000-0xe3c120ff]
309[ 0.281431] pci 0000:04:00.1: reg 0x30: [mem 0xe3c00000-0xe3c0ffff pref]
310[ 0.281601] pci 0000:04:00.2: [197b:2391] type 00 class 0x080501
311[ 0.281633] pci 0000:04:00.2: reg 0x10: [mem 0xe3c13000-0xe3c130ff]
312[ 0.281917] pci 0000:04:00.3: [197b:2393] type 00 class 0x088000
313[ 0.281949] pci 0000:04:00.3: reg 0x10: [mem 0xe3c14000-0xe3c140ff]
314[ 0.282233] pci 0000:04:00.4: [197b:2394] type 00 class 0x088000
315[ 0.282265] pci 0000:04:00.4: reg 0x10: [mem 0xe3c15000-0xe3c150ff]
316[ 0.296699] pci 0000:00:1c.2: PCI bridge to [bus 04]
317[ 0.296716] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
318[ 0.296720] pci 0000:00:1c.2: bridge window [mem 0xe3400000-0xe3cfffff]
319[ 0.296726] pci 0000:00:1c.2: bridge window [mem 0xe5000000-0xe57fffff 64bit pref]
320[ 0.296801] pci 0000:05:00.0: [168c:0034] type 00 class 0x028000
321[ 0.296843] pci 0000:05:00.0: reg 0x10: [mem 0xe5800000-0xe587ffff 64bit]
322[ 0.296927] pci 0000:05:00.0: reg 0x30: [mem 0xe5880000-0xe588ffff pref]
323[ 0.297039] pci 0000:05:00.0: supports D1 D2
324[ 0.297041] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.312704] pci 0000:00:1c.3: PCI bridge to [bus 05]
326[ 0.312725] pci 0000:00:1c.3: bridge window [mem 0xe5800000-0xe58fffff]
327[ 0.312798] pci 0000:06:00.0: [197b:2360] type 00 class 0x010601
328[ 0.312847] pci 0000:06:00.0: reg 0x10: [io 0x4010-0x4017]
329[ 0.312866] pci 0000:06:00.0: reg 0x14: [io 0x4020-0x4023]
330[ 0.312885] pci 0000:06:00.0: reg 0x18: [io 0x4018-0x401f]
331[ 0.312904] pci 0000:06:00.0: reg 0x1c: [io 0x4024-0x4027]
332[ 0.312923] pci 0000:06:00.0: reg 0x20: [io 0x4000-0x400f]
333[ 0.312942] pci 0000:06:00.0: reg 0x24: [mem 0xe5910000-0xe59101ff]
334[ 0.312961] pci 0000:06:00.0: reg 0x30: [mem 0xe5900000-0xe590ffff pref]
335[ 0.313062] pci 0000:06:00.0: PME# supported from D3hot
336[ 0.324706] pci 0000:00:1c.4: PCI bridge to [bus 06]
337[ 0.324729] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
338[ 0.324733] pci 0000:00:1c.4: bridge window [mem 0xe5900000-0xe59fffff]
339[ 0.324898] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
340[ 0.324950] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
341[ 0.324998] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
342[ 0.325046] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
343[ 0.325093] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
344[ 0.325140] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
345[ 0.325186] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
346[ 0.325233] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
347[ 0.325622] ACPI: Enabled 1 GPEs in block 00 to 3F
348[ 0.325736] ACPI : EC: interrupt unblocked
349[ 0.325744] ACPI : EC: event unblocked
350[ 0.325754] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
351[ 0.325760] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
352[ 0.325833] vgaarb: setting as boot device: PCI:0000:01:00.0
353[ 0.325837] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
354[ 0.325843] vgaarb: loaded
355[ 0.325847] vgaarb: bridge control possible 0000:01:00.0
356[ 0.325907] PCI: Using ACPI for IRQ routing
357[ 0.327380] PCI: pci_cache_line_size set to 64 bytes
358[ 0.327478] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
359[ 0.327479] e820: reserve RAM buffer [mem 0x7fd55000-0x7fffffff]
360[ 0.327480] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
361[ 0.327610] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
362[ 0.327619] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
363[ 0.329646] clocksource: Switched to clocksource hpet
364[ 0.335493] VFS: Disk quotas dquot_6.6.0
365[ 0.335522] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
366[ 0.335601] pnp: PnP ACPI init
367[ 0.335735] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
368[ 0.335741] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
369[ 0.335745] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
370[ 0.335749] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
371[ 0.335754] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
372[ 0.335758] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
373[ 0.335762] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
374[ 0.335767] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
375[ 0.335771] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
376[ 0.335775] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
377[ 0.335781] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
378[ 0.336078] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
379[ 0.336083] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
380[ 0.336125] system 00:02: [io 0x0500-0x057f] has been reserved
381[ 0.336130] system 00:02: [io 0x0480-0x04bf] has been reserved
382[ 0.336134] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
383[ 0.336155] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
384[ 0.336186] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
385[ 0.336211] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
386[ 0.336228] pnp: PnP ACPI: found 6 devices
387[ 0.342487] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
388[ 0.342539] pci 0000:00:01.0: PCI bridge to [bus 01]
389[ 0.342544] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
390[ 0.342550] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe30fffff]
391[ 0.342555] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
392[ 0.342563] pci 0000:00:1c.0: PCI bridge to [bus 02]
393[ 0.342577] pci 0000:00:1c.1: PCI bridge to [bus 03]
394[ 0.342582] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
395[ 0.342590] pci 0000:00:1c.1: bridge window [mem 0xe4800000-0xe4ffffff]
396[ 0.342596] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe47fffff 64bit pref]
397[ 0.342607] pci 0000:00:1c.2: PCI bridge to [bus 04]
398[ 0.342613] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
399[ 0.342621] pci 0000:00:1c.2: bridge window [mem 0xe3400000-0xe3cfffff]
400[ 0.342627] pci 0000:00:1c.2: bridge window [mem 0xe5000000-0xe57fffff 64bit pref]
401[ 0.342638] pci 0000:00:1c.3: PCI bridge to [bus 05]
402[ 0.342646] pci 0000:00:1c.3: bridge window [mem 0xe5800000-0xe58fffff]
403[ 0.342657] pci 0000:00:1c.4: PCI bridge to [bus 06]
404[ 0.342662] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
405[ 0.342670] pci 0000:00:1c.4: bridge window [mem 0xe5900000-0xe59fffff]
406[ 0.342681] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
407[ 0.342683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
408[ 0.342684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
409[ 0.342685] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
410[ 0.342687] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
411[ 0.342688] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
412[ 0.342689] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
413[ 0.342690] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
414[ 0.342692] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
415[ 0.342693] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
416[ 0.342694] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
417[ 0.342695] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
418[ 0.342696] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
419[ 0.342698] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
420[ 0.342699] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
421[ 0.342700] pci_bus 0000:00: resource 19 [mem 0x82a00001-0xefffffff window]
422[ 0.342702] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
423[ 0.342703] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
424[ 0.342704] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe30fffff]
425[ 0.342705] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
426[ 0.342707] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
427[ 0.342708] pci_bus 0000:03: resource 1 [mem 0xe4800000-0xe4ffffff]
428[ 0.342709] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe47fffff 64bit pref]
429[ 0.342711] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
430[ 0.342712] pci_bus 0000:04: resource 1 [mem 0xe3400000-0xe3cfffff]
431[ 0.342713] pci_bus 0000:04: resource 2 [mem 0xe5000000-0xe57fffff 64bit pref]
432[ 0.342714] pci_bus 0000:05: resource 1 [mem 0xe5800000-0xe58fffff]
433[ 0.342716] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
434[ 0.342717] pci_bus 0000:06: resource 1 [mem 0xe5900000-0xe59fffff]
435[ 0.342807] NET: Registered protocol family 2
436[ 0.343003] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
437[ 0.343196] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
438[ 0.343301] TCP: Hash tables configured (established 131072 bind 65536)
439[ 0.343326] UDP hash table entries: 8192 (order: 6, 262144 bytes)
440[ 0.343369] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
441[ 0.343447] NET: Registered protocol family 1
442[ 0.343909] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
443[ 0.343947] PCI: CLS 64 bytes, default 64
444[ 0.343988] Unpacking initramfs...
445[ 0.636735] Freeing initrd memory: 17976K
446[ 0.636787] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
447[ 0.636793] software IO TLB [mem 0x7bd55000-0x7fd55000] (64MB) mapped at [ffff961bfbd55000-ffff961bffd54fff]
448[ 0.637188] audit: initializing netlink subsys (disabled)
449[ 0.637207] audit: type=2000 audit(1527215097.536:1): initialized
450[ 0.637589] workingset: timestamp_bits=40 max_order=22 bucket_order=0
451[ 0.637683] zbud: loaded
452[ 0.638456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
453[ 0.638491] io scheduler noop registered
454[ 0.638495] io scheduler deadline registered
455[ 0.638509] io scheduler cfq registered (default)
456[ 0.639444] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
457[ 0.639450] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
458[ 0.639454] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
459[ 0.639459] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
460[ 0.639474] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
461[ 0.639481] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
462[ 0.639500] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
463[ 0.639507] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
464[ 0.639523] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
465[ 0.639527] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
466[ 0.639531] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
467[ 0.639535] pci 0000:04:00.2: Signaling PME through PCIe PME interrupt
468[ 0.639539] pci 0000:04:00.3: Signaling PME through PCIe PME interrupt
469[ 0.639543] pci 0000:04:00.4: Signaling PME through PCIe PME interrupt
470[ 0.639550] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
471[ 0.639564] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
472[ 0.639569] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
473[ 0.639575] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
474[ 0.639590] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
475[ 0.639594] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
476[ 0.639601] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
477[ 0.639610] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
478[ 0.639623] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
479[ 0.639657] pciehp 0000:00:1c.1:pcie004: service driver pciehp loaded
480[ 0.639667] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
481[ 0.639698] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded
482[ 0.639702] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
483[ 0.639717] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
484[ 0.639720] vesafb: scrolling: redraw
485[ 0.639724] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
486[ 0.639740] vesafb: framebuffer at 0xe1000000, mapped to 0xffffac2402000000, using 8128k, total 8128k
487[ 0.644135] Console: switching to colour frame buffer device 240x67
488[ 0.648413] fb0: VESA VGA frame buffer device
489[ 0.648441] intel_idle: MWAIT substates: 0x21120
490[ 0.648442] intel_idle: v0.4.1 model 0x3A
491[ 0.648722] intel_idle: lapic_timer_reliable_states 0xffffffff
492[ 0.649461] GHES: HEST is not enabled!
493[ 0.649531] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
494[ 0.670395] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
495[ 0.670766] Linux agpgart interface v0.103
496[ 0.670852] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
497[ 0.670874] AMD IOMMUv2 functionality not available on this system
498[ 0.671516] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
499[ 0.673318] i8042: Detected active multiplexing controller, rev 1.1
500[ 0.674111] serio: i8042 KBD port at 0x60,0x64 irq 1
501[ 0.674132] serio: i8042 AUX0 port at 0x60,0x64 irq 12
502[ 0.674158] serio: i8042 AUX1 port at 0x60,0x64 irq 12
503[ 0.674178] serio: i8042 AUX2 port at 0x60,0x64 irq 12
504[ 0.674267] serio: i8042 AUX3 port at 0x60,0x64 irq 12
505[ 0.674438] mousedev: PS/2 mouse device common for all mice
506[ 0.674484] rtc_cmos 00:03: RTC can wake from S4
507[ 0.674648] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
508[ 0.674698] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
509[ 0.674730] intel_pstate: Intel P-state driver initializing
510[ 0.675250] ledtrig-cpu: registered to indicate activity on CPUs
511[ 0.675708] NET: Registered protocol family 10
512[ 0.676204] mip6: Mobile IPv6
513[ 0.676234] NET: Registered protocol family 17
514[ 0.676272] mpls_gso: MPLS GSO support
515[ 0.676829] microcode: sig=0x306a9, pf=0x10, revision=0x1f
516[ 0.677085] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
517[ 0.677437] registered taskstats version 1
518[ 0.677502] zswap: loaded using pool lzo/zbud
519[ 0.677795] ima: No TPM chip found, activating TPM-bypass!
520[ 0.678563] rtc_cmos 00:03: setting system clock to 2018-05-25 02:24:58 UTC (1527215098)
521[ 0.678689] PM: Hibernation image not present or could not be loaded.
522[ 0.680855] Freeing unused kernel memory: 1416K
523[ 0.680893] Write protecting the kernel read-only data: 12288k
524[ 0.681814] Freeing unused kernel memory: 1936K
525[ 0.686681] Freeing unused kernel memory: 1228K
526[ 0.697764] x86/mm: Checked W+X mappings: passed, no W+X pages found.
527[ 0.699368] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
528[ 0.723385] random: systemd-udevd: uninitialized urandom read (16 bytes read)
529[ 0.723561] random: systemd-udevd: uninitialized urandom read (16 bytes read)
530[ 0.723621] random: systemd-udevd: uninitialized urandom read (16 bytes read)
531[ 0.724946] random: udevadm: uninitialized urandom read (16 bytes read)
532[ 0.726996] random: udevadm: uninitialized urandom read (16 bytes read)
533[ 0.731120] random: udevadm: uninitialized urandom read (16 bytes read)
534[ 0.733002] random: udevadm: uninitialized urandom read (16 bytes read)
535[ 0.734920] random: udevadm: uninitialized urandom read (16 bytes read)
536[ 0.736763] random: udevadm: uninitialized urandom read (16 bytes read)
537[ 0.738660] random: udevadm: uninitialized urandom read (16 bytes read)
538[ 0.778646] pps_core: LinuxPPS API ver. 1 registered
539[ 0.779588] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
540[ 0.781155] ACPI: bus type USB registered
541[ 0.782386] usbcore: registered new interface driver usbfs
542[ 0.782439] PTP clock support registered
543[ 0.784706] usbcore: registered new interface driver hub
544[ 0.785631] usbcore: registered new device driver usb
545[ 0.788022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
546[ 0.789386] SCSI subsystem initialized
547[ 0.790692] ehci-pci: EHCI PCI platform driver
548[ 0.791937] ehci-pci 0000:00:1a.0: EHCI Host Controller
549[ 0.793046] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
550[ 0.794282] ehci-pci 0000:00:1a.0: debug port 2
551[ 0.796672] sdhci: Secure Digital Host Controller Interface driver
552[ 0.797816] sdhci: Copyright(c) Pierre Ossman
553[ 0.799366] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
554[ 0.799387] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe5a3e000
555[ 0.800684] libata version 3.00 loaded.
556[ 0.800983] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
557[ 0.802046] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
558[ 0.803172] AVX version of gcm_enc/dec engaged.
559[ 0.803994] AES CTR mode by8 optimization enabled
560[ 0.817765] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
561[ 0.819040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
562[ 0.819838] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
563[ 0.820625] usb usb1: Product: EHCI Host Controller
564[ 0.821413] usb usb1: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
565[ 0.822230] usb usb1: SerialNumber: 0000:00:1a.0
566[ 0.823174] hub 1-0:1.0: USB hub found
567[ 0.823949] hub 1-0:1.0: 3 ports detected
568[ 0.824900] ehci-pci 0000:00:1d.0: EHCI Host Controller
569[ 0.825709] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
570[ 0.826532] ehci-pci 0000:00:1d.0: debug port 2
571[ 0.831224] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
572[ 0.831239] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe5a3f000
573[ 0.845725] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
574[ 0.846608] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
575[ 0.847402] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
576[ 0.848203] usb usb2: Product: EHCI Host Controller
577[ 0.848993] usb usb2: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
578[ 0.849808] usb usb2: SerialNumber: 0000:00:1d.0
579[ 0.850819] hub 2-0:1.0: USB hub found
580[ 0.851616] hub 2-0:1.0: 3 ports detected
581[ 0.852711] xhci_hcd 0000:00:14.0: xHCI Host Controller
582[ 0.853916] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
583[ 0.856041] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
584[ 0.857082] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
585[ 0.857180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
586[ 0.857750] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
587[ 0.857794] sdhci-pci 0000:04:00.1: SDHCI controller found [197b:2392] (rev 30)
588[ 0.859178] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
589[ 0.859187] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2391] (rev 30)
590[ 0.859359] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
591[ 0.863466] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
592[ 0.864520] usb usb3: Product: xHCI Host Controller
593[ 0.865565] usb usb3: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd
594[ 0.866637] usb usb3: SerialNumber: 0000:00:14.0
595[ 0.867894] hub 3-0:1.0: USB hub found
596[ 0.868954] hub 3-0:1.0: 4 ports detected
597[ 0.870060] xhci_hcd 0000:00:14.0: xHCI Host Controller
598[ 0.871061] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
599[ 0.872091] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
600[ 0.873099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
601[ 0.874150] usb usb4: Product: xHCI Host Controller
602[ 0.875163] usb usb4: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd
603[ 0.876197] usb usb4: SerialNumber: 0000:00:14.0
604[ 0.877438] hub 4-0:1.0: USB hub found
605[ 0.878553] hub 4-0:1.0: 4 ports detected
606[ 0.879781] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
607[ 1.015096] mmc0: new SDHC card at address aaaa
608[ 1.018667] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
609[ 1.019087] mmcblk0: mmc0:aaaa SC32G 29.7 GiB (ro)
610[ 1.030586] mmcblk0: p1 p2
611[ 1.149735] usb 1-1: new high-speed USB device number 2 using ehci-pci
612[ 1.152589] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:59:e5:03:70:d4
613[ 1.154601] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
614[ 1.156648] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
615[ 1.158598] ahci 0000:00:1f.2: version 3.0
616[ 1.158928] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
617[ 1.159597] e1000e 0000:00:19.0 enp0s25: renamed from eth0
618[ 1.172880] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
619[ 1.174479] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
620[ 1.177606] scsi host0: ahci
621[ 1.177718] usb 2-1: new high-speed USB device number 2 using ehci-pci
622[ 1.181263] scsi host1: ahci
623[ 1.183248] scsi host2: ahci
624[ 1.185009] scsi host3: ahci
625[ 1.186771] scsi host4: ahci
626[ 1.188425] scsi host5: ahci
627[ 1.189960] ata1: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d100 irq 33
628[ 1.191461] ata2: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d180 irq 33
629[ 1.192917] ata3: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d200 irq 33
630[ 1.194357] ata4: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d280 irq 33
631[ 1.195728] ata5: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d300 irq 33
632[ 1.197077] ata6: DUMMY
633[ 1.197720] usb 3-1: new high-speed USB device number 2 using xhci_hcd
634[ 1.200190] ahci 0000:06:00.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
635[ 1.201572] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part
636[ 1.203313] scsi host6: ahci
637[ 1.204781] ata7: SATA max UDMA/133 abar m512@0xe5910000 port 0xe5910100 irq 34
638[ 1.215546] random: fast init done
639[ 1.298520] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
640[ 1.300893] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
641[ 1.303813] hub 1-1:1.0: USB hub found
642[ 1.306764] hub 1-1:1.0: 6 ports detected
643[ 1.326548] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
644[ 1.328395] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
645[ 1.330677] hub 2-1:1.0: USB hub found
646[ 1.333280] hub 2-1:1.0: 8 ports detected
647[ 1.338071] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
648[ 1.340500] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
649[ 1.343422] hub 3-1:1.0: USB hub found
650[ 1.345497] hub 3-1:1.0: 4 ports detected
651[ 1.373887] firewire_core 0000:04:00.0: created device fw0: GUID ffe473fffffffffe, S400
652[ 1.457776] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
653[ 1.478136] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
654[ 1.480507] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
655[ 1.482855] usb 4-1: Product: USB5534
656[ 1.485160] usb 4-1: Manufacturer: SMSC
657[ 1.487468] usb 4-1: SerialNumber: 1239567
658[ 1.490413] hub 4-1:1.0: USB hub found
659[ 1.493017] hub 4-1:1.0: 4 ports detected
660[ 1.512855] ata1: SATA link down (SStatus 0 SControl 300)
661[ 1.520823] ata7: SATA link down (SStatus 0 SControl 300)
662[ 1.597844] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
663[ 1.621823] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
664[ 1.661812] tsc: Refined TSC clocksource calibration: 2594.107 MHz
665[ 1.664099] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
666[ 1.707681] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d
667[ 1.710090] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
668[ 1.712428] usb 1-1.1: SerialNumber: 0030020b3f80
669[ 1.737925] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1
670[ 1.740086] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
671[ 1.742281] usb 2-1.6: Product: BCM20702A0
672[ 1.744418] usb 2-1.6: Manufacturer: Broadcom Corp
673[ 1.746677] usb 2-1.6: SerialNumber: B8763FD92628
674[ 1.758573] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5
675[ 1.829398] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
676[ 1.949984] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
677[ 1.952296] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
678[ 2.004562] ata2.00: configured for UDMA/133
679[ 2.007329] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
680[ 2.246611] psmouse serio4: synaptics: queried max coordinates: x [..5648], y [..4806]
681[ 2.286274] psmouse serio4: synaptics: queried min coordinates: x [1292..], y [1048..]
682[ 2.357672] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
683[ 2.359719] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26c00/0x0, board id: 2009, fw id: 1119621
684[ 2.366186] ata3.00: ATAPI: hp CDDVDW SN-208DB, HH01, max UDMA/100
685[ 2.376639] ata3.00: configured for UDMA/100
686[ 2.397443] scsi 2:0:0:0: CD-ROM hp CDDVDW SN-208DB HH01 PQ: 0 ANSI: 5
687[ 2.404597] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
688[ 2.686087] clocksource: Switched to clocksource tsc
689[ 2.725514] ata4: SATA link down (SStatus 0 SControl 300)
690[ 3.041364] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
691[ 3.044600] ata5.00: ATA-7: GB0250EAFYK, HPG2, max UDMA/133
692[ 3.046920] ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
693[ 3.050096] ata5.00: configured for UDMA/133
694[ 3.052795] scsi 4:0:0:0: Direct-Access ATA GB0250EAFYK HPG2 PQ: 0 ANSI: 5
695[ 3.089883] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
696[ 3.089997] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
697[ 3.090105] sd 4:0:0:0: [sdb] Write Protect is off
698[ 3.090109] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
699[ 3.090156] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
700[ 3.102305] sd 1:0:0:0: [sda] 4096-byte physical blocks
701[ 3.105474] sd 1:0:0:0: [sda] Write Protect is off
702[ 3.107477] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
703[ 3.107503] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
704[ 3.130622] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
705[ 3.132913] cdrom: Uniform CD-ROM driver Revision: 3.20
706[ 3.135411] sdb: sdb1 sdb2
707[ 3.135734] sr 2:0:0:0: Attached scsi CD-ROM sr0
708[ 3.138709] sd 4:0:0:0: [sdb] Attached SCSI disk
709[ 3.160316] sda: sda1
710[ 3.162976] sd 1:0:0:0: [sda] Attached SCSI disk
711[ 3.381271] PM: Starting manual resume from disk
712[ 3.383424] PM: Hibernation image partition 8:18 present
713[ 3.383425] PM: Looking for hibernation image.
714[ 3.383699] PM: Image not found (code -22)
715[ 3.383701] PM: Hibernation image not present or could not be loaded.
716[ 3.568073] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
717[ 4.836279] ip_tables: (C) 2000-2006 Netfilter Core Team
718[ 4.934033] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
719[ 4.936547] systemd[1]: Detected architecture x86-64.
720[ 5.010554] systemd[1]: Set hostname to <ROB-DESKTOP-TEST>.
721[ 5.166780] random: crng init done
722[ 6.221766] systemd[1]: Listening on Syslog Socket.
723[ 6.227575] systemd[1]: Listening on Journal Socket (/dev/log).
724[ 6.232995] systemd[1]: Listening on Journal Audit Socket.
725[ 6.238106] systemd[1]: Listening on udev Kernel Socket.
726[ 6.243315] systemd[1]: Created slice System Slice.
727[ 6.248212] systemd[1]: Created slice system-getty.slice.
728[ 6.253753] systemd[1]: Mounting Huge Pages File System...
729[ 6.778381] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
730[ 6.970070] systemd-journald[278]: Received request to flush runtime journal from PID 1
731[ 9.155207] input: PC Speaker as /devices/platform/pcspkr/input/input9
732[ 9.225574] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0D:00/input/input10
733[ 9.226568] ACPI: Lid Switch [LID]
734[ 9.227575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
735[ 9.228559] ACPI: Power Button [PWRF]
736[ 9.415629] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
737[ 9.418053] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
738[ 9.420320] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
739[ 9.422610] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
740[ 9.425155] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
741[ 9.427440] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
742[ 9.429726] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
743[ 9.432119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
744[ 9.434509] lpc_ich: Resource conflict(s) found affecting gpio_ich
745[ 9.475495] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
746[ 9.586789] ACPI: AC Adapter [AC] (on-line)
747[ 9.622390] ACPI: Battery Slot [BAT0] (battery present)
748[ 9.623554] ACPI: Battery Slot [BAT1] (battery absent)
749[ 9.665494] sd 1:0:0:0: Attached scsi generic sg0 type 0
750[ 9.666675] sr 2:0:0:0: Attached scsi generic sg1 type 5
751[ 9.667844] sd 4:0:0:0: Attached scsi generic sg2 type 0
752[ 9.842739] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
753[ 9.845669] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
754[ 9.848421] RAPL PMU: hw unit of domain package 2^-16 Joules
755[ 9.851117] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
756[ 10.553679] [drm] Initialized
757[ 11.006421] iTCO_vendor_support: vendor-support=0
758[ 11.007925] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
759[ 11.009706] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
760[ 11.011870] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
761[ 11.170039] wmi: Mapper loaded
762[ 11.546041] checking generic (e1000000 7f0000) vs hw (d0000000 10000000)
763[ 11.546043] checking generic (e1000000 7f0000) vs hw (e0000000 2000000)
764[ 11.546044] fb: switching to nouveaufb from VESA VGA
765[ 11.547416] Console: switching to colour dummy device 80x25
766[ 11.547649] nouveau 0000:01:00.0: NVIDIA GM204 (124170a1)
767[ 11.582210] mei_me 0000:00:16.0: wait hw ready failed
768[ 11.582217] mei_me 0000:00:16.0: hw_start failed ret = -62
769[ 11.582232] mei_me 0000:00:16.0: H_RST is set = 0x80000015
770[ 11.603228] ath: phy0: ASPM enabled: 0x43
771[ 11.603234] ath: EEPROM regdomain: 0x6a
772[ 11.603235] ath: EEPROM indicates we should expect a direct regpair map
773[ 11.603238] ath: Country alpha2 being used: 00
774[ 11.603238] ath: Regpair used: 0x6a
775[ 11.612328] Bluetooth: Core ver 2.22
776[ 11.612345] NET: Registered protocol family 31
777[ 11.612350] Bluetooth: HCI device and connection manager initialized
778[ 11.612356] Bluetooth: HCI socket layer initialized
779[ 11.612362] Bluetooth: L2CAP socket layer initialized
780[ 11.612370] Bluetooth: SCO socket layer initialized
781[ 11.614998] nouveau 0000:01:00.0: bios: version 84.04.6d.00.08
782[ 11.615268] nouveau 0000:01:00.0: disp: dcb 15 type 8 unknown
783[ 11.638861] nouveau 0000:01:00.0: firmware: failed to load nvidia/gm204/gr/sw_nonctx.bin (-2)
784[ 11.638874] nouveau 0000:01:00.0: Direct firmware load for nvidia/gm204/gr/sw_nonctx.bin failed with error -2
785[ 11.638887] nouveau 0000:01:00.0: gr: failed to load gr/sw_nonctx
786[ 11.638898] nouveau 0000:01:00.0: gr ctor failed, -2
787[ 11.638911] nouveau: probe of 0000:01:00.0 failed with error -2
788[ 11.929837] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
789[ 11.930328] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffac2402080000, irq=19
790[ 11.983929] usbcore: registered new interface driver btusb
791[ 12.422782] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0
792[ 13.233127] Adding 31307772k swap on /dev/sdb2. Priority:-1 extents:1 across:31307772k FS
793[ 13.598360] mei_me 0000:00:16.0: wait hw ready failed
794[ 13.598378] mei_me 0000:00:16.0: hw_start failed ret = -62
795[ 13.598399] mei_me 0000:00:16.0: H_RST is set = 0x80000015
796[ 15.614438] mei_me 0000:00:16.0: wait hw ready failed
797[ 15.614450] mei_me 0000:00:16.0: hw_start failed ret = -62
798[ 15.614457] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
799[ 15.614467] mei_me 0000:00:16.0: reset failed ret = -19
800[ 15.614473] mei_me 0000:00:16.0: link layer initialization failed.
801[ 15.614479] mei_me 0000:00:16.0: init hw failure.
802[ 15.614691] mei_me 0000:00:16.0: initialization failed.
803[ 15.615186] pcieport 0000:00:01.0: can't derive routing for PCI INT B
804[ 15.615196] snd_hda_intel 0000:01:00.1: PCI INT B: no GSI
805[ 15.615209] snd_hda_intel 0000:01:00.1: Disabling MSI
806[ 15.615222] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
807[ 16.172976] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
808[ 16.172992] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
809[ 16.173002] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
810[ 16.173009] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
811[ 16.173015] snd_hda_codec_idt hdaudioC0D0: inputs:
812[ 16.173022] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
813[ 16.173029] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
814[ 16.173035] snd_hda_codec_idt hdaudioC0D0: Line=0xf
815[ 16.218816] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
816[ 16.219694] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
817[ 16.219839] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
818[ 16.221689] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
819[ 16.221781] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
820[ 16.221870] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
821[ 16.221951] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
822[ 16.222029] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
823[ 17.979243] intel_rapl: Found RAPL domain package
824[ 17.979259] intel_rapl: Found RAPL domain core
825[ 18.152650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
826[ 18.152665] Bluetooth: BNEP filters: protocol multicast
827[ 18.152678] Bluetooth: BNEP socket layer initialized
828[ 18.654648] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001
829[ 19.359958] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
830[ 19.360184] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
831[ 19.360353] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
832[ 19.360430] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
833[ 20.955516] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
834[ 21.223054] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
835[ 21.234155] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
836[ 21.246251] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
837[ 21.260763] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
838[ 21.739069] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
839[ 24.108870] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
840[ 24.108925] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
841[ 27.528636] fuse init (API version 7.26)
842[ 47.558400] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
843[ 50.949720] Bluetooth: RFCOMM TTY layer initialized
844[ 50.949728] Bluetooth: RFCOMM socket layer initialized
845[ 50.949732] Bluetooth: RFCOMM ver 1.11
846[ 300.129172] mce: [Hardware Error]: Machine check events logged
847[ 367.199788] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
848[ 682.192487] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready