Gitiles
Code Review Sign In
review.coreboot.org / board-status / 8c10ff6a764da0b00f057c29a297c4f1ff87a4b8 / . / asus / kfsn4-dre / 4.0-9735-g54e6aa7 / 2015-05-21T05:57:48Z / kernel_log.txt
blob: 924463df76136f9094c8628b055e7c4d419c2e6c [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand0c099912015-05-21 07:11:20 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9735-g54e6aa7-dirty 05/21/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
29[ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000160000000 aka 5632M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
46[ 0.000000] [mem 0x15fe00000-0x15fffffff] page 2M
47[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
48[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
49[ 0.000000] [mem 0x15c000000-0x15fdfffff] page 2M
50[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
51[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
52[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
53[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
54[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
55[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
56[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
57[ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M
58[ 0.000000] [mem 0xdfe00000-0xdffaafff] page 4k
59[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
60[ 0.000000] ACPI: Early table checksum verification disabled
61[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
62[ 0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
65[ 0.000000] ACPI: FACS 0x00000000DFFB4210 000040
66[ 0.000000] ACPI: SSDT 0x00000000DFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
67[ 0.000000] ACPI: APIC 0x00000000DFFB7800 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SRAT 0x00000000DFFB78D0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: SLIT 0x00000000DFFB7A48 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: HPET 0x00000000DFFB7A80 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SRAT 0x00000000DFFB7AC0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: SLIT 0x00000000DFFB7C38 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
73[ 0.000000] ACPI: Local APIC address 0xfee00000
74[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
77[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
78[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
81[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
83[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
85[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
86[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
87[ 0.000000] NUMA: Initialized distance table, cnt=3
88[ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
89[ 0.000000] Scanning NUMA topology in Northbridge 24
90[ 0.000000] Number of physical nodes 2
91[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
92[ 0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
93[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
94[ 0.000000] NODE_DATA [mem 0x11fffb000-0x11fffffff]
95[ 0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
96[ 0.000000] NODE_DATA [mem 0x15fff9000-0x15fffdfff]
97[ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
98[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
99[ 0.000000] [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
100[ 0.000000] Zone ranges:
101[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
102[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
103[ 0.000000] Normal [mem 0x100000000-0x15fffffff]
104[ 0.000000] Movable zone start for each node
105[ 0.000000] Early memory node ranges
106[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
107[ 0.000000] node 0: [mem 0x00100000-0xdffaafff]
108[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
109[ 0.000000] node 1: [mem 0x120000000-0x15fffffff]
110[ 0.000000] On node 0 totalpages: 1048393
111[ 0.000000] DMA zone: 56 pages used for memmap
112[ 0.000000] DMA zone: 21 pages reserved
113[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
114[ 0.000000] DMA32 zone: 12487 pages used for memmap
115[ 0.000000] DMA32 zone: 913323 pages, LIFO batch:31
116[ 0.000000] Normal zone: 1792 pages used for memmap
117[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
118[ 0.000000] On node 1 totalpages: 262144
119[ 0.000000] Normal zone: 3584 pages used for memmap
120[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
121[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
122[ 0.000000] ACPI: Local APIC address 0xfee00000
123[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
129[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
130[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
137[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
138[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
139[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
140[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
142[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
143[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
144[ 0.000000] ACPI: IRQ9 used by override.
145[ 0.000000] ACPI: IRQ14 used by override.
146[ 0.000000] ACPI: IRQ15 used by override.
147[ 0.000000] Using ACPI (MADT) for SMP configuration information
148[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
149[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
150[ 0.000000] nr_irqs_gsi: 40
151[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
153[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
154[ 0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
155[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
156[ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
157[ 0.000000] Booting paravirtualized kernel on bare hardware
158[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
159[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
160[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
161[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
162[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292597
163[ 0.000000] Policy zone: Normal
164[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
165[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
166[ 0.000000] AGP: Checking aperture...
167[ 0.000000] AGP: No AGP bridge found
Raptor Engineering Automated Coreboot Test Stand241d51a2015-05-22 22:14:12 +0000[diff] [blame]168[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
Raptor Engineering Automated Coreboot Test Stand0c099912015-05-21 07:11:20 +0000[diff] [blame]169[ 0.000000] Aperture beyond 4GB. Ignoring.
170[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
171[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
172[ 0.000000] AGP: This costs you 64MB of RAM
173[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
174[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
175[ 0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
176[ 0.000000] Hierarchical RCU implementation.
177[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
178[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
179[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
180[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
181[ 0.000000] spurious 8259A interrupt: IRQ7.
182[ 0.000000] Console: colour VGA+ 80x25
183[ 0.000000] console [tty0] enabled
184[ 0.000000] console [ttyS0] enabled
185[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
186[ 0.000000] hpet clockevent registered
187[ 0.000000] tsc: Fast TSC calibration using PIT
Raptor Engineering Automated Coreboot Test Stand8c10ff62015-05-23 11:11:45 +0000[diff] [blame^]188[ 0.000000] tsc: Detected 1909.845 MHz processor
189[ 0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.69 BogoMIPS (lpj=7639380)
190[ 0.010961] pid_max: default: 32768 minimum: 301
191[ 0.015684] ACPI: Core revision 20140424
192[ 0.022099] ACPI: All ACPI Tables successfully acquired
193[ 0.027619] Security Framework initialized
194[ 0.031796] AppArmor: AppArmor disabled by boot time parameter
195[ 0.037706] Yama: disabled by default; enable with sysctl kernel.yama.*
196[ 0.045523] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
197[ 0.058846] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
198[ 0.068739] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
199[ 0.075738] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
200[ 0.083700] Initializing cgroup subsys memory
201[ 0.088164] Initializing cgroup subsys devices
202[ 0.092708] Initializing cgroup subsys freezer
203[ 0.097232] Initializing cgroup subsys net_cls
204[ 0.101768] Initializing cgroup subsys blkio
205[ 0.106124] Initializing cgroup subsys perf_event
206[ 0.110921] Initializing cgroup subsys net_prio
207[ 0.115578] tseg: 0000000000
208[ 0.115592] CPU: Physical Processor ID: 0
209[ 0.119712] CPU: Processor Core ID: 0
210[ 0.124515] mce: CPU supports 6 MCE banks
211[ 0.128661] LVT offset 0 assigned for vector 0xf9
212[ 0.133452] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Raptor Engineering Automated Coreboot Test Stand0c099912015-05-21 07:11:20 +0000[diff] [blame]213Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
214tlb_flushall_shift: 6
Raptor Engineering Automated Coreboot Test Stand8c10ff62015-05-23 11:11:45 +0000[diff] [blame^]215[ 0.148930] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
216[ 0.158069] ftrace: allocating 21601 entries in 85 pages
217[ 0.173550] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
218[ 0.219196] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
219[ 0.336310] Performance Events: AMD PMU driver.
220[ 0.341036] ... version: 0
221[ 0.345127] ... bit width: 48
222[ 0.349322] ... generic registers: 4
223[ 0.353420] ... value mask: 0000ffffffffffff
224[ 0.358811] ... max period: 00007fffffffffff
225[ 0.364207] ... fixed-purpose events: 0
226[ 0.368310] ... event mask: 000000000000000f
227[ 0.376343] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
228[ 0.384682] x86: Booting SMP configuration:
229[ 0.388952] .... node #0, CPUs: #1 #2 #3
230[ 0.433575] .... node #1, CPUs: #4 #5 #6 #7
231[ 0.585063] x86: Booted up 2 nodes, 8 CPUs
232[ 0.589508] smpboot: Total of 8 processors activated (30557.97 BogoMIPS)
233[ 0.602117] devtmpfs: initialized
234[ 0.614110] pinctrl core: initialized pinctrl subsystem
235[ 0.619582] NET: Registered protocol family 16
236[ 0.624316] cpuidle: using governor ladder
237[ 0.628494] cpuidle: using governor menu
238[ 0.632501] node 0 link 1: io port [1000, 3fff]
239[ 0.632505] TOM: 00000000e0000000 aka 3584M
240[ 0.636760] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
241[ 0.636764] node 0 link 1: mmio [fc000000, fc3fffff]
242[ 0.636768] node 0 link 1: mmio [f8000000, fbffffff]
243[ 0.636770] TOM2: 0000000160000000 aka 5632M
244[ 0.641125] bus: [bus 00-05] on node 0 link 1
245[ 0.641127] bus: 00 [io 0x0000-0xffff]
246[ 0.641129] bus: 00 [mem 0xf0000000-0xffffffff]
247[ 0.641131] bus: 00 [mem 0x160000000-0xfcffffffff]
248[ 0.641237] ACPI: bus type PCI registered
249[ 0.645320] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
250[ 0.651993] PCI: Using configuration type 1 for base access
251[ 0.657643] PCI: Using configuration type 1 for extended access
252[ 0.664264] mtrr: your CPUs had inconsistent variable MTRR settings
253[ 0.670618] mtrr: probably your BIOS does not setup all CPUs.
254[ 0.676440] mtrr: corrected configuration.
255[ 0.693214] ACPI: Added _OSI(Module Device)
256[ 0.697517] ACPI: Added _OSI(Processor Device)
257[ 0.702040] ACPI: Added _OSI(3.0 _SCP Extensions)
258[ 0.706821] ACPI: Added _OSI(Processor Aggregator Device)
259[ 0.715913] ACPI: Interpreter enabled
260[ 0.719666] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
261[ 0.729149] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
262[ 0.738596] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
263[ 0.748042] ACPI: (supports S0 S1 S5)
264[ 0.751783] ACPI: Using IOAPIC for interrupt routing
265[ 0.756875] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
266[ 0.786219] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
267[ 0.792484] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
268[ 0.800795] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
269[ 0.839158] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
270[ 0.849277] PCI host bridge to bus 0000:00
271[ 0.853472] pci_bus 0000:00: root bus resource [bus 00-05]
272[ 0.859050] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
273[ 0.865324] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
274[ 0.872291] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
275[ 0.879258] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
276[ 0.885542] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
277[ 0.885729] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
278[ 0.885736] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
279[ 0.885866] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
280[ 0.885877] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
281[ 0.885899] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
282[ 0.885914] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
283[ 0.885939] pci 0000:00:01.1: PME# supported from D3hot D3cold
284[ 0.886049] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
285[ 0.886065] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
286[ 0.886097] pci 0000:00:02.0: supports D1 D2
287[ 0.886126] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
288[ 0.886193] pci 0000:00:02.0: System wakeup disabled by ACPI
289[ 0.892005] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
290[ 0.892020] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
291[ 0.892055] pci 0000:00:02.1: supports D1 D2
292[ 0.892079] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
293[ 0.892133] pci 0000:00:02.1: System wakeup disabled by ACPI
294[ 0.897938] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
295[ 0.897965] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
296[ 0.898009] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
297[ 0.905241] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
298[ 0.911857] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
299[ 0.919085] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
300[ 0.925801] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
301[ 0.925812] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
302[ 0.925817] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
303[ 0.925822] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
304[ 0.925826] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
305[ 0.925831] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
306[ 0.925836] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
307[ 0.926001] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
308[ 0.926008] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
309[ 0.926015] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
310[ 0.926020] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
311[ 0.926024] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
312[ 0.926029] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
313[ 0.926034] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
314[ 0.926208] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
315[ 0.926306] pci 0000:00:09.0: System wakeup disabled by ACPI
316[ 0.932101] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
317[ 0.932147] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
318[ 0.932199] pci 0000:00:0b.0: System wakeup disabled by ACPI
319[ 0.937991] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
320[ 0.938044] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
321[ 0.938144] pci 0000:00:0c.0: System wakeup disabled by ACPI
322[ 0.943940] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
323[ 0.943994] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
324[ 0.944095] pci 0000:00:0d.0: System wakeup disabled by ACPI
325[ 0.949893] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
326[ 0.949932] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
327[ 0.950027] pci 0000:00:0e.0: System wakeup disabled by ACPI
328[ 0.955844] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
329[ 0.956003] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
330[ 0.956121] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
331[ 0.956223] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
332[ 0.956389] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
333[ 0.956502] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
334[ 0.956647] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
335[ 0.956844] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
336[ 0.956967] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
337[ 0.957113] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
338[ 0.957319] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
339[ 0.957343] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
340[ 0.957368] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
341[ 0.957393] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
342[ 0.957446] pci 0000:01:04.0: supports D1 D2
343[ 0.957533] pci 0000:00:09.0: PCI bridge to [bus 01]
344[ 0.962602] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
345[ 0.962606] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
346[ 0.962609] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
347[ 0.962771] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
348[ 0.962799] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
349[ 0.962843] pci 0000:02:00.0: reg 0x30: [mem 0x78400000-0x7840ffff pref]
350[ 0.962916] pci 0000:02:00.0: PME# supported from D3hot D3cold
351[ 0.963025] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
352[ 0.973147] pci 0000:00:0b.0: PCI bridge to [bus 02]
353[ 0.978201] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
354[ 0.978297] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
355[ 0.978321] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
356[ 0.978431] pci 0000:03:00.0: PME# supported from D3hot D3cold
357[ 0.978538] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
358[ 0.988661] pci 0000:00:0c.0: PCI bridge to [bus 03]
359[ 0.993718] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
360[ 0.993795] pci 0000:00:0d.0: PCI bridge to [bus 04]
361[ 0.998919] pci 0000:00:0e.0: PCI bridge to [bus 05]
362[ 1.003999] pci_bus 0000:00: on NUMA node 0
363[ 1.004107] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
364[ 1.010538] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
365[ 1.016957] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
366[ 1.024626] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
367[ 1.032304] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
368[ 1.039964] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
369[ 1.047638] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
370[ 1.054062] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
371[ 1.060480] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
372[ 1.068128] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
373[ 1.075792] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
374[ 1.083469] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
375[ 1.089893] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
376[ 1.096321] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
377[ 1.103990] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
378[ 1.111644] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
379[ 1.119316] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
380[ 1.128426] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
381[ 1.135159] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
382[ 1.141867] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
383[ 1.148589] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
384[ 1.155584] ACPI: Enabled 1 GPEs in block 00 to 1F
385[ 1.160841] vgaarb: setting as boot device: PCI:0000:01:04.0
386[ 1.166626] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
387[ 1.174819] vgaarb: loaded
388[ 1.177617] vgaarb: bridge control possible 0000:01:04.0
389[ 1.183171] PCI: Using ACPI for IRQ routing
390[ 1.187452] PCI: pci_cache_line_size set to 64 bytes
391[ 1.187509] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
392[ 1.187512] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
393[ 1.187827] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
394[ 1.194963] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
395[ 1.200247] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
396[ 1.208989] Switched to clocksource hpet
397[ 1.224537] pnp: PnP ACPI init
398[ 1.227758] ACPI: bus type PNP registered
399[ 1.232393] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
400[ 1.232473] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
401[ 1.232572] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
402[ 1.232650] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
403[ 1.232691] pnp 00:04: [dma 2]
404[ 1.232732] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
405[ 1.232754] pnp: PnP ACPI: found 5 devices
406[ 1.236956] ACPI: bus type PNP unregistered
407[ 1.249038] pci 0000:02:00.0: can't claim BAR 6 [mem 0x78400000-0x7840ffff pref]: no compatible bridge window
408[ 1.259098] pci 0000:00:09.0: PCI bridge to [bus 01]
409[ 1.264135] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
410[ 1.270316] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
411[ 1.277188] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
412[ 1.284523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
413[ 1.291867] pci 0000:00:0b.0: PCI bridge to [bus 02]
414[ 1.296917] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
415[ 1.303792] pci 0000:00:0c.0: PCI bridge to [bus 03]
416[ 1.308838] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
417[ 1.315714] pci 0000:00:0d.0: PCI bridge to [bus 04]
418[ 1.320770] pci 0000:00:0e.0: PCI bridge to [bus 05]
419[ 1.325821] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
420[ 1.325824] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
421[ 1.325827] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
422[ 1.325830] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
423[ 1.325833] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
424[ 1.325836] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
425[ 1.325838] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
426[ 1.325841] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
427[ 1.325844] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
428[ 1.325980] NET: Registered protocol family 2
429[ 1.330935] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
430[ 1.338714] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
431[ 1.346149] TCP: Hash tables configured (established 65536 bind 65536)
432[ 1.352837] TCP: reno registered
433[ 1.356163] UDP hash table entries: 4096 (order: 5, 131072 bytes)
434[ 1.362435] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
435[ 1.369291] NET: Registered protocol family 1
436[ 1.374159] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
437[ 1.380360] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
438[ 1.386350] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.391970] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.397550] pci 0000:00:0b.0: Found disabled HT MSI Mapping
441[ 1.403216] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.408837] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.414432] pci 0000:00:0c.0: Found disabled HT MSI Mapping
444[ 1.420085] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.425691] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.431277] pci 0000:00:0d.0: Found disabled HT MSI Mapping
447[ 1.436936] pci 0000:00:00.0: Found enabled HT MSI Mapping
448[ 1.442555] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.448144] pci 0000:00:0e.0: Found disabled HT MSI Mapping
450[ 1.453803] pci 0000:00:00.0: Found enabled HT MSI Mapping
451[ 1.459408] pci 0000:01:04.0: Video device with shadowed ROM
452[ 1.459417] PCI: CLS 64 bytes, default 64
453[ 1.459525] Unpacking initramfs...
454[ 1.692507] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
455[ 1.700509] PCI-DMA: Disabling AGP.
456[ 1.705699] PCI-DMA: aperture base @ d4000000 size 65536 KB
457[ 1.711388] PCI-DMA: using GART IOMMU.
458[ 1.715234] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
459[ 1.727366] platform rtc_cmos: registered platform RTC device (no PNP device found)
460[ 1.735719] microcode: CPU0: patch_level=0x01000096
461[ 1.740716] microcode: CPU1: patch_level=0x01000096
462[ 1.745733] microcode: CPU2: patch_level=0x01000096
463[ 1.750745] microcode: CPU3: patch_level=0x01000096
464[ 1.755758] microcode: CPU4: patch_level=0x01000096
465[ 1.760755] microcode: CPU5: patch_level=0x01000096
466[ 1.765749] microcode: CPU6: patch_level=0x01000096
467[ 1.771846] microcode: CPU7: patch_level=0x01000096
468[ 1.776945] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
469[ 1.785912] LVT offset 1 assigned for vector 0x400
470[ 1.790808] IBS: LVT offset 1 assigned
471[ 1.794685] perf: AMD IBS detected (0x00000007)
472[ 1.799903] futex hash table entries: 2048 (order: 5, 131072 bytes)
473[ 1.806398] audit: initializing netlink subsys (disabled)
474[ 1.811918] audit: type=2000 audit(1432379080.628:1): initialized
475[ 1.818832] HugeTLB registered 2 MB page size, pre-allocated 0 pages
476[ 1.825332] zbud: loaded
477[ 1.828286] VFS: Disk quotas dquot_6.5.2
478[ 1.832349] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
479[ 1.839007] msgmni has been set to 9941
480[ 1.843481] alg: No test for stdrng (krng)
481[ 1.847765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
482[ 1.855409] io scheduler noop registered
483[ 1.859429] io scheduler deadline registered
484[ 1.863860] io scheduler cfq registered (default)
485[ 1.868870] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
486[ 1.868998] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
487[ 1.869122] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
488[ 1.869246] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
489[ 1.869396] aer 0000:00:0b.0:pcie02: service driver aer loaded
490[ 1.869425] aer 0000:00:0c.0:pcie02: service driver aer loaded
491[ 1.869450] aer 0000:00:0d.0:pcie02: service driver aer loaded
492[ 1.869475] aer 0000:00:0e.0:pcie02: service driver aer loaded
493[ 1.869495] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
494[ 1.876597] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
495[ 1.883230] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
496[ 1.883241] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
497[ 1.890280] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
498[ 1.896887] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
499[ 1.896898] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
500[ 1.903941] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
501[ 1.903953] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
502[ 1.910995] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
503[ 1.911023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
504[ 1.916698] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
505[ 1.923530] GHES: HEST is not enabled!
506[ 1.927501] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
507[ 1.954262] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
508[ 1.982070] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
509[ 1.990116] Linux agpgart interface v0.103
510[ 1.994539] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
511[ 2.005197] serio: i8042 KBD port at 0x60,0x64 irq 1
512[ 2.010310] serio: i8042 AUX port at 0x60,0x64 irq 12
513[ 2.015641] mousedev: PS/2 mouse device common for all mice
514[ 2.021438] rtc_cmos rtc_cmos: RTC can wake from S4
515[ 2.026654] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
516[ 2.033134] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
517[ 2.041092] ledtrig-cpu: registered to indicate activity on CPUs
518[ 2.047358] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
519[ 2.053877] AMD IOMMUv2 functionality not available on this system
520[ 2.060278] TCP: cubic registered
521[ 2.063833] NET: Registered protocol family 10
522[ 2.068794] mip6: Mobile IPv6
523[ 2.071854] NET: Registered protocol family 17
524[ 2.076466] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
525[ 2.085249] mpls_gso: MPLS GSO support
526[ 2.089987] registered taskstats version 1
527[ 2.094895] rtc_cmos rtc_cmos: setting system clock to 2015-05-23 11:04:42 UTC (1432379082)
528[ 2.103480] PM: Hibernation image not present or could not be loaded.
529[ 2.105305] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
530[ 2.113309] Write protecting the kernel read-only data: 8192k
531[ 2.122638] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
532[ 2.131382] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
533[ 2.151645] systemd-udevd[99]: starting version 215
534[ 2.157183] random: systemd-udevd urandom read with 4 bits of entropy available
535[ 2.179631] pps_core: LinuxPPS API ver. 1 registered
536[ 2.184748] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
537[ 2.194364] ACPI: bus type USB registered
538[ 2.198655] usbcore: registered new interface driver usbfs
539[ 2.198721] PTP clock support registered
540[ 2.208348] usbcore: registered new interface driver hub
541[ 2.214009] usbcore: registered new device driver usb
542[ 2.214134] tg3.c:v3.137 (May 11, 2014)
543[ 2.214146] tg3 0000:02:00.0: enabling device (0004 -> 0006)
544[ 2.214353] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.235592] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
546[ 2.242795] ehci-pci: EHCI PCI platform driver
547[ 2.247601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
548[ 2.247651] ehci-pci 0000:00:02.1: EHCI Host Controller
549[ 2.247667] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
550[ 2.247687] ehci-pci 0000:00:02.1: debug port 1
551[ 2.247733] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
552[ 2.247763] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
553[ 2.256707] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
554[ 2.256792] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
555[ 2.256794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
556[ 2.256796] usb usb1: Product: EHCI Host Controller
557[ 2.256797] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
558[ 2.256798] usb usb1: SerialNumber: 0000:00:02.1
559[ 2.257074] hub 1-0:1.0: USB hub found
560[ 2.257085] hub 1-0:1.0: 10 ports detected
561[ 2.321567] ohci-pci: OHCI PCI platform driver
562[ 2.326325] ohci-pci 0000:00:02.0: OHCI PCI host controller
563[ 2.332121] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
564[ 2.339706] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
565[ 2.344142] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
566[ 2.344145] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
567[ 2.344147] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
568[ 2.344149] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
569[ 2.344269] tg3 0000:03:00.0: enabling device (0004 -> 0006)
570[ 2.344422] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
571[ 2.424879] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
572[ 2.435309] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
573[ 2.445162] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
574[ 2.446642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
575[ 2.446644] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
576[ 2.446645] usb usb2: Product: OHCI PCI host controller
577[ 2.446647] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
578[ 2.446648] usb usb2: SerialNumber: 0000:00:02.0
579[ 2.446835] hub 2-0:1.0: USB hub found
580[ 2.446843] hub 2-0:1.0: 10 ports detected
581[ 2.491400] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
582[ 2.505136] FS-Cache: Loaded
583[ 2.512439] RPC: Registered named UNIX socket transport module.
584[ 2.518962] RPC: Registered udp transport module.
585[ 2.525044] RPC: Registered tcp transport module.
586[ 2.531117] RPC: Registered tcp NFSv4.1 backchannel transport module.
587[ 2.543632] FS-Cache: Netfs 'nfs' registered for caching
588[ 2.557493] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
589[ 2.604661] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
590[ 2.724489] tsc: Refined TSC clocksource calibration: 1909.787 MHz
591[ 3.728255] Switched to clocksource tsc
592[ 4.216656] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
593[ 4.223321] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
594[ 4.230336] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
595[ 15.055879] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
596[ 15.069765] systemd[1]: Detected architecture 'x86-64'.
597[ 15.990673] random: nonblocking pool is initialized
598[ 18.945212] systemd[1]: Inserted module 'autofs4'
599[ 18.970732] systemd[1]: Set hostname to <cb-test-tgt>.
600[ 23.613051] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
601[ 23.625946] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
602[ 23.641529] systemd[1]: Expecting device dev-ttyS0.device...
603[ 23.657389] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
604[ 23.665338] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
605[ 23.673047] systemd[1]: Starting Remote File Systems (Pre).
606[ 23.689357] systemd[1]: Reached target Remote File Systems (Pre).
607[ 23.695660] systemd[1]: Starting Encrypted Volumes.
608[ 23.709285] systemd[1]: Reached target Encrypted Volumes.
609[ 23.714857] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
610[ 23.723049] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
611[ 23.731099] systemd[1]: Starting Paths.
612[ 23.745255] systemd[1]: Reached target Paths.
613[ 23.749820] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
614[ 23.773248] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
615[ 23.782824] systemd[1]: Starting Swap.
616[ 23.797238] systemd[1]: Reached target Swap.
617[ 23.801660] systemd[1]: Starting Root Slice.
618[ 23.813234] systemd[1]: Created slice Root Slice.
619[ 23.818072] systemd[1]: Starting User and Session Slice.
620[ 23.833213] systemd[1]: Created slice User and Session Slice.
621[ 23.839080] systemd[1]: Starting Delayed Shutdown Socket.
622[ 23.853218] systemd[1]: Listening on Delayed Shutdown Socket.
623[ 23.859127] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
624[ 23.881208] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
625[ 23.888327] systemd[1]: Starting Journal Socket (/dev/log).
626[ 23.905187] systemd[1]: Listening on Journal Socket (/dev/log).
627[ 23.911293] systemd[1]: Starting udev Kernel Socket.
628[ 23.925192] systemd[1]: Listening on udev Kernel Socket.
629[ 23.931746] systemd[1]: Starting udev Control Socket.
630[ 23.949170] systemd[1]: Listening on udev Control Socket.
631[ 23.954698] systemd[1]: Starting Journal Socket.
632[ 23.969163] systemd[1]: Listening on Journal Socket.
633[ 23.974271] systemd[1]: Starting System Slice.
634[ 23.989157] systemd[1]: Created slice System Slice.
635[ 23.994158] systemd[1]: Starting system-getty.slice.
636[ 24.009163] systemd[1]: Created slice system-getty.slice.
637[ 24.014728] systemd[1]: Starting system-serial\x2dgetty.slice.
638[ 24.029157] systemd[1]: Created slice system-serial\x2dgetty.slice.
639[ 24.035613] systemd[1]: Starting Increase datagram queue length...
640[ 24.054319] systemd[1]: Mounting Debug File System...
641[ 24.070122] systemd[1]: Mounting POSIX Message Queue File System...
642[ 24.245504] systemd[1]: Starting Load Kernel Modules...
643[ 25.239106] systemd[1]: Started Set Up Additional Binary Formats.
644[ 25.248649] systemd[1]: Starting Create list of required static device nodes for the current kernel...
645[ 25.270401] systemd[1]: Starting udev Coldplug all Devices...
646[ 25.286187] systemd[1]: Mounting Huge Pages File System...
647[ 25.302161] systemd[1]: Starting Slices.
648[ 25.316715] systemd[1]: Reached target Slices.
649[ 25.321415] systemd[1]: Starting Remount Root and Kernel File Systems...
650[ 28.175787] systemd[1]: Started Increase datagram queue length.
651[ 28.182548] systemd[1]: Starting Syslog Socket.
652[ 28.195791] systemd[1]: Listening on Syslog Socket.
653[ 28.200863] systemd[1]: Starting Sockets.
654[ 28.215712] systemd[1]: Reached target Sockets.
655[ 28.220420] systemd[1]: Starting Journal Service...
656[ 28.247778] systemd[1]: Started Journal Service.
657[ 35.294683] systemd-udevd[187]: starting version 215
658[ 35.377966] systemd-journald[173]: Received request to flush runtime journal from PID 1
659[ 45.413720] nfs: server 10.100.1.1 not responding, still trying
660[ 45.413725] nfs: server 10.100.1.1 not responding, still trying
661[ 45.421705] nfs: server 10.100.1.1 not responding, still trying
662[ 46.605295] nfs: server 10.100.1.1 not responding, still trying
663[ 46.796575] nfs: server 10.100.1.1 OK
664[ 46.800388] nfs: server 10.100.1.1 OK
665[ 46.800398] nfs: server 10.100.1.1 OK
666[ 46.800475] nfs: server 10.100.1.1 OK
667[ 47.736907] nfs: server 10.100.1.1 not responding, still trying
668[ 47.742948] nfs: server 10.100.1.1 not responding, still trying
669[ 47.748966] nfs: server 10.100.1.1 not responding, still trying
670[ 47.754987] nfs: server 10.100.1.1 not responding, still trying
671[ 47.761007] nfs: server 10.100.1.1 not responding, still trying
672[ 47.767022] nfs: server 10.100.1.1 not responding, still trying
673[ 47.773036] nfs: server 10.100.1.1 not responding, still trying
674[ 47.779053] nfs: server 10.100.1.1 not responding, still trying
675[ 47.785074] nfs: server 10.100.1.1 not responding, still trying
676[ 47.791094] nfs: server 10.100.1.1 not responding, still trying
677[ 47.797106] nfs: server 10.100.1.1 not responding, still trying
678[ 48.182335] nfs: server 10.100.1.1 OK
679[ 48.275541] nfs: server 10.100.1.1 OK
680[ 48.279369] nfs: server 10.100.1.1 OK
681[ 48.338658] nfs: server 10.100.1.1 OK
682[ 48.406276] nfs: server 10.100.1.1 OK
683[ 48.494398] nfs: server 10.100.1.1 OK
684[ 48.578827] nfs: server 10.100.1.1 OK
685[ 48.628846] nfs: server 10.100.1.1 OK
686[ 48.659798] nfs: server 10.100.1.1 OK
687[ 48.734270] nfs: server 10.100.1.1 OK
688[ 48.787386] nfs: server 10.100.1.1 OK
689[ 49.608264] nfs: server 10.100.1.1 not responding, still trying
690[ 49.637867] nfs: server 10.100.1.1 OK
691[ 54.929592] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
692[ 54.987701] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
693[ 54.996190] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
694[ 56.387611] EDAC MC: Ver: 3.0.0
695[ 57.344416] MCE: In-kernel MCE decoding enabled.
696[ 57.662981] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
697[ 57.671528] ACPI: Power Button [PWRB]
698[ 57.675362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
699[ 57.682889] ACPI: Power Button [PWRF]
700[ 57.881349] FDC 0 is a post-1991 82077
701[ 58.233058] AMD64 EDAC driver v3.4.0
702[ 58.236887] EDAC amd64: DRAM ECC enabled.
703[ 58.241003] EDAC amd64: F10h detected (node 0).
704[ 58.245633] EDAC MC: DCT0 chip selects:
705[ 58.245635] EDAC amd64: MC: 0: 0MB 1: 0MB
706[ 58.250431] EDAC amd64: MC: 2: 0MB 3: 0MB
707[ 58.255228] EDAC amd64: MC: 4: 0MB 5: 0MB
708[ 58.260016] EDAC amd64: MC: 6: 1024MB 7: 1024MB
709[ 58.264811] EDAC MC: DCT1 chip selects:
710[ 58.264813] EDAC amd64: MC: 0: 0MB 1: 0MB
711[ 58.269610] EDAC amd64: MC: 2: 0MB 3: 0MB
712[ 58.274401] EDAC amd64: MC: 4: 0MB 5: 0MB
713[ 58.279191] EDAC amd64: MC: 6: 1024MB 7: 1024MB
714[ 58.283982] EDAC amd64: using x4 syndromes.
715[ 58.288252] EDAC amd64: MCT channel count: 2
716[ 58.292643] EDAC amd64: CS6: Registered DDR2 RAM
717[ 58.297351] EDAC amd64: CS7: Registered DDR2 RAM
718[ 58.302270] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
719[ 58.312113] EDAC amd64: DRAM ECC enabled.
720[ 58.316303] EDAC amd64: F10h detected (node 1).
721[ 58.320962] EDAC MC: DCT0 chip selects:
722[ 58.320965] EDAC amd64: MC: 0: 1024MB 1: 0MB
723[ 58.325762] EDAC amd64: MC: 2: 0MB 3: 0MB
724[ 58.330553] EDAC amd64: MC: 4: 0MB 5: 0MB
725[ 58.335342] EDAC amd64: MC: 6: 0MB 7: 0MB
726[ 58.340125] EDAC MC: DCT1 chip selects:
727[ 58.340127] EDAC amd64: MC: 0: 0MB 1: 0MB
728[ 58.344916] EDAC amd64: MC: 2: 0MB 3: 0MB
729[ 58.349699] EDAC amd64: MC: 4: 0MB 5: 0MB
730[ 58.354511] EDAC amd64: MC: 6: 0MB 7: 0MB
731[ 58.359297] EDAC amd64: using x4 syndromes.
732[ 58.363560] EDAC amd64: MCT channel count: 1
733[ 58.367949] EDAC amd64: CS0: Registered DDR2 RAM
734[ 58.372828] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
735[ 58.382673] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
736[ 58.582107] SCSI subsystem initialized
737[ 58.673653] acpi-cpufreq: overriding BIOS provided _PSD data
738[ 58.686061] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
739[ 58.691439] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
740[ 58.874653] input: PC Speaker as /devices/platform/pcspkr/input/input4
741[ 59.552300] libata version 3.00 loaded.
742[ 60.006506] sata_nv 0000:00:07.0: version 3.5
743[ 60.006879] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
744[ 60.013542] scsi0 : sata_nv
745[ 60.016828] scsi1 : sata_nv
746[ 60.019943] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
747[ 60.027249] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
748[ 60.034869] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
749[ 60.041297] scsi2 : sata_nv
750[ 60.044360] scsi3 : sata_nv
751[ 60.047329] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
752[ 60.054562] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
753[ 60.165033] pata_amd 0000:00:06.0: version 0.4.1
754[ 60.165928] scsi4 : pata_amd
755[ 60.169261] scsi5 : pata_amd
756[ 60.172425] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
757[ 60.179494] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
758[ 60.344563] ata1: SATA link down (SStatus 0 SControl 300)
759[ 60.372566] ata3: SATA link down (SStatus 0 SControl 300)
760[ 60.660456] ata2: SATA link down (SStatus 0 SControl 300)
761[ 60.976348] ata4: SATA link down (SStatus 0 SControl 300)
762[ 61.776109] kvm: Nested Virtualization enabled
763[ 61.780724] kvm: Nested Paging enabled
764[ 106.229509] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
765[ 206.267809] nfs: server 10.100.1.1 not responding, still trying
766[ 206.347011] nfs: server 10.100.1.1 OK
767[ 209.870799] nfs: server 10.100.1.1 not responding, still trying
768[ 209.876869] nfs: server 10.100.1.1 not responding, still trying
769[ 209.882859] nfs: server 10.100.1.1 not responding, still trying
770[ 209.888865] nfs: server 10.100.1.1 not responding, still trying
771[ 209.894868] nfs: server 10.100.1.1 OK
772[ 209.984647] nfs: server 10.100.1.1 OK
773[ 210.067710] nfs: server 10.100.1.1 OK
774[ 210.152313] nfs: server 10.100.1.1 OK
775[ 279.311422] nfs: server 10.100.1.1 not responding, still trying
776[ 279.317498] nfs: server 10.100.1.1 not responding, still trying
777[ 279.323533] nfs: server 10.100.1.1 not responding, still trying
778[ 279.329518] nfs: server 10.100.1.1 not responding, still trying
779[ 279.335513] nfs: server 10.100.1.1 not responding, still trying
780[ 279.341499] nfs: server 10.100.1.1 not responding, still trying
781[ 279.347485] nfs: server 10.100.1.1 not responding, still trying
782[ 279.353472] nfs: server 10.100.1.1 not responding, still trying
783[ 279.359458] nfs: server 10.100.1.1 not responding, still trying
784[ 279.365443] nfs: server 10.100.1.1 not responding, still trying
785[ 279.371487] nfs: server 10.100.1.1 not responding, still trying
786[ 279.377503] nfs: server 10.100.1.1 not responding, still trying
787[ 279.383510] nfs: server 10.100.1.1 not responding, still trying
788[ 279.494411] nfs: server 10.100.1.1 OK
789[ 279.601156] nfs: server 10.100.1.1 OK
790[ 279.710099] nfs: server 10.100.1.1 OK
791[ 279.805336] nfs: server 10.100.1.1 OK
792[ 279.903457] nfs: server 10.100.1.1 OK
793[ 280.006672] nfs: server 10.100.1.1 OK
794[ 280.095443] nfs: server 10.100.1.1 OK
795[ 280.189544] nfs: server 10.100.1.1 OK
796[ 280.223162] nfs: server 10.100.1.1 not responding, still trying
797[ 280.229262] nfs: server 10.100.1.1 not responding, still trying
798[ 280.235277] nfs: server 10.100.1.1 not responding, still trying
799[ 280.241294] nfs: server 10.100.1.1 not responding, still trying
800[ 280.247306] nfs: server 10.100.1.1 not responding, still trying
801[ 280.253307] nfs: server 10.100.1.1 not responding, still trying
802[ 280.259311] nfs: server 10.100.1.1 not responding, still trying
803[ 280.265315] nfs: server 10.100.1.1 not responding, still trying
804[ 280.271331] nfs: server 10.100.1.1 not responding, still trying
805[ 280.277333] nfs: server 10.100.1.1 not responding, still trying
806[ 280.281505] nfs: server 10.100.1.1 OK
807[ 280.287062] nfs: server 10.100.1.1 not responding, still trying
808[ 280.293086] nfs: server 10.100.1.1 not responding, still trying
809[ 280.299109] nfs: server 10.100.1.1 not responding, still trying
810[ 280.305127] nfs: server 10.100.1.1 not responding, still trying
811[ 280.311136] nfs: server 10.100.1.1 not responding, still trying
812[ 280.378642] nfs: server 10.100.1.1 OK
813[ 280.454698] nfs: server 10.100.1.1 OK
814[ 280.528270] nfs: server 10.100.1.1 OK
815[ 280.622937] nfs: server 10.100.1.1 OK
816[ 282.003464] nfs: server 10.100.1.1 OK
817[ 282.073439] nfs: server 10.100.1.1 OK
818[ 282.142195] nfs: server 10.100.1.1 OK
819[ 282.206856] nfs: server 10.100.1.1 OK
820[ 282.282414] nfs: server 10.100.1.1 OK
821[ 282.358748] nfs: server 10.100.1.1 OK
822[ 282.431512] nfs: server 10.100.1.1 OK
823[ 282.496140] nfs: server 10.100.1.1 OK
824[ 282.565951] nfs: server 10.100.1.1 OK
825[ 282.632545] nfs: server 10.100.1.1 OK
826[ 282.712677] nfs: server 10.100.1.1 OK
827[ 282.780325] nfs: server 10.100.1.1 OK
828[ 282.845283] nfs: server 10.100.1.1 OK
829[ 282.919335] nfs: server 10.100.1.1 OK
830[ 282.993146] nfs: server 10.100.1.1 OK
831[ 283.514241] nfs: server 10.100.1.1 not responding, still trying
832[ 284.829862] nfs: server 10.100.1.1 not responding, still trying
833[ 284.835962] nfs: server 10.100.1.1 not responding, still trying
834[ 284.842000] nfs: server 10.100.1.1 not responding, still trying
835[ 284.848025] nfs: server 10.100.1.1 not responding, still trying
836[ 284.854073] nfs: server 10.100.1.1 not responding, still trying
837[ 286.204768] nfs: server 10.100.1.1 OK
838[ 287.201204] nfs: server 10.100.1.1 not responding, still trying
839[ 287.207265] nfs: server 10.100.1.1 not responding, still trying
840[ 287.213327] nfs: server 10.100.1.1 not responding, still trying
841[ 287.219354] nfs: server 10.100.1.1 not responding, still trying
842[ 287.225409] nfs: server 10.100.1.1 not responding, still trying
843[ 287.231436] nfs: server 10.100.1.1 not responding, still trying
844[ 288.904482] nfs: server 10.100.1.1 OK
845[ 288.998064] nfs: server 10.100.1.1 OK
846[ 289.066845] nfs: server 10.100.1.1 OK
847[ 289.163581] nfs: server 10.100.1.1 OK
848[ 289.167429] nfs: server 10.100.1.1 OK
849[ 290.404318] nfs: server 10.100.1.1 not responding, still trying
850[ 291.513370] nfs: server 10.100.1.1 OK
851[ 291.574209] nfs: server 10.100.1.1 OK
852[ 291.650286] nfs: server 10.100.1.1 OK
853[ 291.720047] nfs: server 10.100.1.1 OK
854[ 291.783103] nfs: server 10.100.1.1 OK
855[ 291.795566] nfs: server 10.100.1.1 OK
856[ 293.407466] nfs: server 10.100.1.1 not responding, still trying
857[ 293.509516] nfs: server 10.100.1.1 OK
858[ 294.645572] nfs: server 10.100.1.1 OK