blob: 2d982304837b35314556342bae55a6397e70fdfe [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +02001Permission denied, please try again.
2[ 0.000000] Initializing cgroup subsys cpuset
3[ 0.000000] Initializing cgroup subsys cpu
4[ 0.000000] Initializing cgroup subsys cpuacct
5[ 0.000000] Linux version 3.10.0-rc1+ (root@ruiktest) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #1 SMP Tue May 14 13:50:51 CEST 2013
6[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10-rc1 root=/dev/sda7 ro console=ttyS0,115200
7[ 0.000000] KERNEL supported cpus:
8[ 0.000000] Intel GenuineIntel
9[ 0.000000] AMD AuthenticAMD
10[ 0.000000] Centaur CentaurHauls
11[ 0.000000] e820: BIOS-provided physical RAM map:
12[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf13efff] usable
16[ 0.000000] BIOS-e820: [mem 0x00000000bf13f000-0x00000000dfffffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: ASUS F2A85-M, BIOS 4.0-5005-g4eb4a1f 12/07/2013
22[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24[ 0.000000] No AGP bridge found
25[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: uncachable
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-FFFFF write-back
31[ 0.000000] MTRR variable ranges enabled:
32[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
33[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
34[ 0.000000] 2 disabled
35[ 0.000000] 3 disabled
36[ 0.000000] 4 disabled
37[ 0.000000] 5 disabled
38[ 0.000000] 6 base 0000FF800000 mask FFFFFF800000 write-protect
39[ 0.000000] 7 disabled
40[ 0.000000] TOM2: 000000011f000000 aka 4592M
41[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
42[ 0.000000] e820: last_pfn = 0xbf13f max_arch_pfn = 0x400000000
43[ 0.000000] found SMP MP-table at [mem 0x000fd9c0-0x000fd9cf] mapped at [ffff8800000fd9c0]
44[ 0.000000] Scanning 1 areas for low memory corruption
45[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
46[ 0.000000] Using GB pages for direct mapping
47[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
48[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
49[ 0.000000] BRK [0x01f60000, 0x01f60fff] PGTABLE
50[ 0.000000] BRK [0x01f61000, 0x01f61fff] PGTABLE
51[ 0.000000] BRK [0x01f62000, 0x01f62fff] PGTABLE
52[ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff]
53[ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M
54[ 0.000000] BRK [0x01f63000, 0x01f63fff] PGTABLE
55[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff]
56[ 0.000000] [mem 0x11c000000-0x11edfffff] page 2M
57[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
58[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
59[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf13efff]
60[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
61[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
62[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
63[ 0.000000] [mem 0x80000000-0xbeffffff] page 2M
64[ 0.000000] [mem 0xbf000000-0xbf13efff] page 4k
65[ 0.000000] ACPI: RSDP 00000000000fd9a0 00014 (v00 CORE )
66[ 0.000000] ACPI: RSDT 00000000bf141424 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: FACP 00000000bf142db0 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: DSDT 00000000bf1414c8 018A1 (v02 ASUS COREBOOT 00010001 INTL 20130626)
69[ 0.000000] ACPI: FACS 00000000bf142d70 00040
70[ 0.000000] ACPI: HPET 00000000bf142ea8 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: APIC 00000000bf142ee0 00062 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: HEST 00000000bf142f48 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
73[ 0.000000] ACPI: SSDT 00000000bf143120 0051F (v02 AMD ALIB 00000001 MSFT 04000000)
74[ 0.000000] ACPI: SSDT 00000000bf143640 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
75[ 0.000000] ACPI: SSDT 00000000bf143cf2 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
76[ 0.000000] ACPI: Local APIC address 0xfee00000
77[ 0.000000] No NUMA configuration found
78[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
79[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff]
80[ 0.000000] NODE_DATA [mem 0x11effa000-0x11effdfff]
81[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0
82[ 0.000000] Zone ranges:
83[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
84[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
85[ 0.000000] Normal [mem 0x100000000-0x11effffff]
86[ 0.000000] Movable zone start for each node
87[ 0.000000] Early memory node ranges
88[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
89[ 0.000000] node 0: [mem 0x00100000-0xbf13efff]
90[ 0.000000] node 0: [mem 0x100000000-0x11effffff]
91[ 0.000000] On node 0 totalpages: 909533
92[ 0.000000] DMA zone: 64 pages used for memmap
93[ 0.000000] DMA zone: 21 pages reserved
94[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
95[ 0.000000] DMA32 zone: 12165 pages used for memmap
96[ 0.000000] DMA32 zone: 778559 pages, LIFO batch:31
97[ 0.000000] Normal zone: 1984 pages used for memmap
98[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
99[ 0.000000] ACPI: PM-Timer IO Port: 0x818
100[ 0.000000] ACPI: Local APIC address 0xfee00000
101[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
102[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
103[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
104[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
105[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
106[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
107[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
108[ 0.000000] ACPI: IRQ0 used by override.
109[ 0.000000] ACPI: IRQ2 used by override.
110[ 0.000000] ACPI: IRQ9 used by override.
111[ 0.000000] Using ACPI (MADT) for SMP configuration information
112[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
113[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
114[ 0.000000] nr_irqs_gsi: 40
115[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
116[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
117[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
118[ 0.000000] PM: Registered nosave memory: 00000000bf13f000 - 00000000e0000000
119[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
120[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
121[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
122[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
123[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
124[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011ec00000 s81536 r8192 d20864 u1048576
125[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
126[ 0.000000] pcpu-alloc: [0] 0 1
127[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 895299
128[ 0.000000] Policy zone: Normal
129[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-rc1 root=/dev/sda7 ro console=ttyS0,115200
130[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
131[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
132[ 0.000000] Checking aperture...
133[ 0.000000] No AGP bridge found
134[ 0.000000] Node 0: aperture @ 0 size 32 MB
135[ 0.000000] Your BIOS doesn't leave a aperture memory hole
136[ 0.000000] Please enable the IOMMU option in the BIOS setup
137[ 0.000000] This costs you 64 MB of RAM
138[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
139[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
140[ 0.000000] Memory: 3432864k/4702208k available (6556k kernel code, 1064076k absent, 205268k reserved, 6635k data, 1160k init)
141[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
142[ 0.000000] Hierarchical RCU implementation.
143[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
144[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
145[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
146[ 0.000000] spurious 8259A interrupt: IRQ7.
147[ 0.000000] Console: colour VGA+ 80x25
148[ 0.000000] console [ttyS0] enabled
149[ 0.000000] hpet clockevent registered
150[ 0.000000] tsc: Fast TSC calibration using PIT
151[ 0.004000] tsc: Detected 3393.745 MHz processor
152[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.49 BogoMIPS (lpj=13574980)
153[ 0.010722] pid_max: default: 32768 minimum: 301
154[ 0.015365] Security Framework initialized
155[ 0.019475] AppArmor: AppArmor initialized
156[ 0.023840] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
157[ 0.032204] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
158[ 0.039779] Mount-cache hash table entries: 256
159[ 0.044475] Initializing cgroup subsys devices
160[ 0.048930] Initializing cgroup subsys freezer
161[ 0.053375] Initializing cgroup subsys blkio
162[ 0.057652] Initializing cgroup subsys perf_event
163[ 0.062385] tseg: 0000000000
164[ 0.062390] CPU: Physical Processor ID: 0
165[ 0.066406] CPU: Processor Core ID: 0
166[ 0.070074] mce: CPU supports 7 MCE banks
167[ 0.074100] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
168[ 0.074100] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
169[ 0.074100] tlb_flushall_shift: 5
170[ 0.089371] Freeing SMP alternatives: 24k freed
171[ 0.093910] ACPI: Core revision 20130328
172[ 0.098907] ACPI: All ACPI Tables successfully acquired
173[ 0.104179] ftrace: allocating 25124 entries in 99 pages
174[ 0.118365] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
175[ 0.163923] smpboot: CPU0: AMD A4-5300 APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
176[ 0.278143] Performance Events:
177[ 0.281201] perf: AMD core performance counters detected
178[ 0.286703] AMD PMU driver.
179[ 0.289503] ... version: 0
180[ 0.293511] ... bit width: 48
181[ 0.297606] ... generic registers: 6
182[ 0.301614] ... value mask: 0000ffffffffffff
183[ 0.306921] ... max period: 00007fffffffffff
184[ 0.312231] ... fixed-purpose events: 0
185[ 0.316238] ... event mask: 000000000000003f
186[ 0.322433] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
187[ 0.330512] smpboot: Booting Node 0, Processors #1 OK
188[ 0.348908] Brought up 2 CPUs
189[ 0.351883] smpboot: Total of 2 processors activated (13574.98 BogoMIPS)
190[ 0.358970] devtmpfs: initialized
191[ 0.363314] EVM: security.selinux
192[ 0.366629] EVM: security.SMACK64
193[ 0.369943] EVM: security.capability
194[ 0.374382] RTC time: 22:03:43, date: 12/07/13
195[ 0.378871] NET: Registered protocol family 16
196[ 0.383471] ACPI: bus type PCI registered
197[ 0.387528] PCI: Using configuration type 1 for base access
198[ 0.393104] PCI: Using configuration type 1 for extended access
199[ 0.399973] bio: create slab <bio-0> at 0
200[ 0.404080] ACPI: Added _OSI(Module Device)
201[ 0.408267] ACPI: Added _OSI(Processor Device)
202[ 0.412708] ACPI: Added _OSI(3.0 _SCP Extensions)
203[ 0.417411] ACPI: Added _OSI(Processor Aggregator Device)
204[ 0.423246] ACPI: EC: Look up EC in DSDT
205[ 0.423743] ACPI: Executed 1 blocks of module-level executable AML code
206[ 0.432246] ACPI: Interpreter enabled
207[ 0.435934] ACPI: (supports S0 S1 S2 S3 S4 S5)
208[ 0.440380] ACPI: Using IOAPIC for interrupt routing
209[ 0.445352] HEST: Table parsing has been initialized.
210[ 0.450400] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
211[ 0.461900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
212[ 0.468186] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
213[ 0.478035] PCI host bridge to bus 0000:00
214[ 0.482134] pci_bus 0000:00: root bus resource [bus 00-ff]
215[ 0.487623] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
216[ 0.493800] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
217[ 0.499984] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
218[ 0.506853] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
219[ 0.513726] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
220[ 0.520608] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
221[ 0.520668] pci 0000:00:01.0: [1002:9993] type 00 class 0x030000
222[ 0.520676] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
223[ 0.520682] pci 0000:00:01.0: reg 14: [io 0x2000-0x20ff]
224[ 0.520687] pci 0000:00:01.0: reg 18: [mem 0xf0100000-0xf013ffff]
225[ 0.520720] pci 0000:00:01.0: supports D1 D2
226[ 0.520791] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
227[ 0.520798] pci 0000:00:01.1: reg 10: [mem 0xf0140000-0xf0143fff]
228[ 0.520837] pci 0000:00:01.1: supports D1 D2
229[ 0.520934] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
230[ 0.520952] pci 0000:00:10.0: reg 10: [mem 0xf0148000-0xf0149fff 64bit]
231[ 0.521043] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
232[ 0.521091] pci 0000:00:10.0: System wakeup disabled by ACPI
233[ 0.526793] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
234[ 0.526811] pci 0000:00:10.1: reg 10: [mem 0xf014a000-0xf014bfff 64bit]
235[ 0.526901] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
236[ 0.526949] pci 0000:00:10.1: System wakeup disabled by ACPI
237[ 0.532644] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
238[ 0.532658] pci 0000:00:11.0: reg 10: [io 0x2410-0x2417]
239[ 0.532666] pci 0000:00:11.0: reg 14: [io 0x2420-0x2423]
240[ 0.532674] pci 0000:00:11.0: reg 18: [io 0x2418-0x241f]
241[ 0.532682] pci 0000:00:11.0: reg 1c: [io 0x2424-0x2427]
242[ 0.532690] pci 0000:00:11.0: reg 20: [io 0x2400-0x240f]
243[ 0.532698] pci 0000:00:11.0: reg 24: [mem 0xf014f000-0xf014f7ff]
244[ 0.532768] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
245[ 0.532779] pci 0000:00:12.0: reg 10: [mem 0xf014c000-0xf014cfff]
246[ 0.532845] pci 0000:00:12.0: System wakeup disabled by ACPI
247[ 0.538539] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
248[ 0.538555] pci 0000:00:12.2: reg 10: [mem 0xf014f800-0xf014f8ff]
249[ 0.538623] pci 0000:00:12.2: supports D1 D2
250[ 0.538625] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
251[ 0.538654] pci 0000:00:12.2: System wakeup disabled by ACPI
252[ 0.544344] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
253[ 0.544355] pci 0000:00:13.0: reg 10: [mem 0xf014d000-0xf014dfff]
254[ 0.544424] pci 0000:00:13.0: System wakeup disabled by ACPI
255[ 0.550112] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
256[ 0.550128] pci 0000:00:13.2: reg 10: [mem 0xf014f900-0xf014f9ff]
257[ 0.550196] pci 0000:00:13.2: supports D1 D2
258[ 0.550197] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
259[ 0.550229] pci 0000:00:13.2: System wakeup disabled by ACPI
260[ 0.555924] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
261[ 0.556018] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
262[ 0.556036] pci 0000:00:14.2: reg 10: [mem 0xf0144000-0xf0147fff 64bit]
263[ 0.556090] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
264[ 0.556152] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
265[ 0.556263] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
266[ 0.556330] pci 0000:00:14.4: System wakeup disabled by ACPI
267[ 0.562018] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
268[ 0.562029] pci 0000:00:14.5: reg 10: [mem 0xf014e000-0xf014efff]
269[ 0.562105] pci 0000:00:14.5: System wakeup disabled by ACPI
270[ 0.567798] pci 0000:00:14.7: [1022:7806] type 00 class 0x080501
271[ 0.567813] pci 0000:00:14.7: reg 10: [mem 0xf014fa00-0xf014faff 64bit]
272[ 0.567912] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
273[ 0.567973] pci 0000:00:15.0: supports D1 D2
274[ 0.568026] pci 0000:00:15.0: System wakeup disabled by ACPI
275[ 0.573713] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
276[ 0.573773] pci 0000:00:15.1: supports D1 D2
277[ 0.573829] pci 0000:00:15.1: System wakeup disabled by ACPI
278[ 0.579519] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
279[ 0.579592] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
280[ 0.579662] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
281[ 0.579733] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
282[ 0.579809] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
283[ 0.579878] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
284[ 0.580019] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
285[ 0.586818] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
286[ 0.586820] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
287[ 0.586822] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
288[ 0.586824] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
289[ 0.586826] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
290[ 0.586876] pci 0000:00:15.0: PCI bridge to [bus 02]
291[ 0.591912] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
292[ 0.591929] pci 0000:03:00.0: reg 10: [io 0x1000-0x10ff]
293[ 0.591956] pci 0000:03:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
294[ 0.591973] pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
295[ 0.592045] pci 0000:03:00.0: supports D1 D2
296[ 0.592047] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
297[ 0.598510] pci 0000:00:15.1: PCI bridge to [bus 03]
298[ 0.603487] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
299[ 0.603494] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
300[ 0.603562] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
301[ 0.609625] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
302[ 0.615529] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
303[ 0.622550] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
304[ 0.629574] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
305[ 0.636590] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
306[ 0.643608] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
307[ 0.650626] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
308[ 0.655967] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
309[ 0.662987] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
310[ 0.670052] ACPI: Enabled 5 GPEs in block 00 to 1F
311[ 0.674884] acpi root: \_SB_.PCI0 notify handler is installed
312[ 0.674905] Found 1 acpi root devices
313[ 0.674977] ACPI: No dock devices found.
314[ 0.678953] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
315[ 0.687046] vgaarb: loaded
316[ 0.689757] vgaarb: bridge control possible 0000:00:01.0
317[ 0.695205] SCSI subsystem initialized
318[ 0.698954] ACPI: bus type ATA registered
319[ 0.703007] libata version 3.00 loaded.
320[ 0.703023] ACPI: bus type USB registered
321[ 0.707053] usbcore: registered new interface driver usbfs
322[ 0.712544] usbcore: registered new interface driver hub
323[ 0.717878] usbcore: registered new device driver usb
324[ 0.723033] PCI: Using ACPI for IRQ routing
325[ 0.727216] PCI: pci_cache_line_size set to 64 bytes
326[ 0.727268] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
327[ 0.727270] e820: reserve RAM buffer [mem 0xbf13f000-0xbfffffff]
328[ 0.727271] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
329[ 0.727354] NetLabel: Initializing
330[ 0.730754] NetLabel: domain hash size = 128
331[ 0.735107] NetLabel: protocols = UNLABELED CIPSOv4
332[ 0.740080] NetLabel: unlabeled traffic allowed by default
333[ 0.745705] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
334[ 0.750654] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
335[ 0.758507] Switching to clocksource hpet
336[ 0.767987] AppArmor: AppArmor Filesystem Enabled
337[ 0.772729] pnp: PnP ACPI init
338[ 0.775801] ACPI: bus type PNP registered
339[ 0.779954] system 00:00: [mem 0xf014fb02-0xf0150b01] has been reserved
340[ 0.786573] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
341[ 0.786607] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
342[ 0.786630] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
343[ 0.786641] pnp 00:03: [dma 4]
344[ 0.786660] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
345[ 0.786686] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
346[ 0.786804] pnp: PnP ACPI: found 5 devices
347[ 0.790908] ACPI: bus type PNP unregistered
348[ 0.801514] pci 0000:00:14.4: PCI bridge to [bus 01]
349[ 0.806495] pci 0000:00:15.0: PCI bridge to [bus 02]
350[ 0.811473] pci 0000:00:15.1: PCI bridge to [bus 03]
351[ 0.816447] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
352[ 0.822547] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
353[ 0.830448] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
354[ 0.830450] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
355[ 0.830452] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
356[ 0.830454] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
357[ 0.830456] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
358[ 0.830458] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
359[ 0.830460] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
360[ 0.830461] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
361[ 0.830463] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
362[ 0.830465] pci_bus 0000:01: resource 8 [mem 0xe0000000-0xffffffff]
363[ 0.830467] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
364[ 0.830468] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
365[ 0.830494] NET: Registered protocol family 2
366[ 0.835009] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
367[ 0.842384] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
368[ 0.849108] TCP: Hash tables configured (established 32768 bind 32768)
369[ 0.855672] TCP: reno registered
370[ 0.858913] UDP hash table entries: 2048 (order: 4, 65536 bytes)
371[ 0.864942] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
372[ 0.871459] NET: Registered protocol family 1
373[ 0.875836] pci 0000:00:01.0: Boot video device
374[ 0.876868] PCI: CLS 64 bytes, default 64
375[ 0.877101] PCI-DMA: Disabling AGP.
376[ 0.880604] PCI-DMA: More than 4GB of RAM and no IOMMU
377[ 0.880604] falling back to iommu=soft.
378[ 0.889563] More than 4GB of memory but GART IOMMU not available.
379[ 0.895660] falling back to iommu=soft.
380[ 0.899505] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
381[ 0.905948] software IO TLB [mem 0xbb13f000-0xbf13f000] (64MB) mapped at [ffff8800bb13f000-ffff8800bf13efff]
382[ 0.915851] perf: AMD NB counters detected
383[ 0.919959] LVT offset 0 assigned for vector 0x400
384[ 0.924770] perf: AMD IBS detected (0x000000ff)
385[ 0.929319] Scanning for low memory corruption every 60 seconds
386[ 0.935450] audit: initializing netlink socket (disabled)
387[ 0.940865] type=2000 audit(1386453822.720:1): initialized
388[ 0.974180] bounce pool size: 64 pages
389[ 0.977954] HugeTLB registered 2 MB page size, pre-allocated 0 pages
390[ 0.985598] VFS: Disk quotas dquot_6.5.2
391[ 0.989572] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
392[ 0.996401] fuse init (API version 7.22)
393[ 1.000420] msgmni has been set to 6704
394[ 1.004608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
395[ 1.012034] io scheduler noop registered
396[ 1.015963] io scheduler deadline registered (default)
397[ 1.021127] io scheduler cfq registered
398[ 1.025044] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
399[ 1.025107] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
400[ 1.025180] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
401[ 1.032149] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
402[ 1.032164] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
403[ 1.039129] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
404[ 1.045665] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
405[ 1.045678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
406[ 1.051267] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
407[ 1.057975] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
408[ 1.067108] ACPI: Power Button [PWRB]
409[ 1.070801] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
410[ 1.078202] ACPI: Power Button [PWRF]
411[ 1.081926] ACPI: acpi_idle registered with cpuidle
412[ 1.082764] GHES: Failed to enable APEI firmware first mode.
413[ 1.088483] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
414[ 1.115206] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
415[ 1.122426] Linux agpgart interface v0.103
416[ 1.127682] brd: module loaded
417[ 1.131357] loop: module loaded
418[ 1.134582] ahci 0000:00:11.0: version 3.0
419[ 1.134762] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x1 impl SATA mode
420[ 1.142856] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio
421[ 1.149931] scsi0 : ahci
422[ 1.152545] scsi1 : ahci
423[ 1.155139] scsi2 : ahci
424[ 1.157727] scsi3 : ahci
425[ 1.160324] scsi4 : ahci
426[ 1.162919] scsi5 : ahci
427[ 1.165508] scsi6 : ahci
428[ 1.168109] scsi7 : ahci
429[ 1.170676] ata1: SATA max UDMA/133 abar m2048@0xf014f000 port 0xf014f100 irq 19
430[ 1.178072] ata2: DUMMY
431[ 1.180525] ata3: DUMMY
432[ 1.182980] ata4: DUMMY
433[ 1.185430] ata5: DUMMY
434[ 1.187882] ata6: DUMMY
435[ 1.190332] ata7: DUMMY
436[ 1.192784] ata8: DUMMY
437[ 1.195566] libphy: Fixed MDIO Bus: probed
438[ 1.199736] tun: Universal TUN/TAP device driver, 1.6
439[ 1.204792] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
440[ 1.211025] PPP generic driver version 2.4.2
441[ 1.215342] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
442[ 1.221868] ehci-pci: EHCI PCI platform driver
443[ 1.226434] ehci-pci 0000:00:12.2: EHCI Host Controller
444[ 1.231668] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
445[ 1.239070] QUIRK: Enable AMD PLL fix
446[ 1.239072] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
447[ 1.247779] ehci-pci 0000:00:12.2: debug port 1
448[ 1.252350] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014f800
449[ 1.267085] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
450[ 1.272865] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
451[ 1.279652] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
452[ 1.286876] usb usb1: Product: EHCI Host Controller
453[ 1.291760] usb usb1: Manufacturer: Linux 3.10.0-rc1+ ehci_hcd
454[ 1.297599] usb usb1: SerialNumber: 0000:00:12.2
455[ 1.302345] hub 1-0:1.0: USB hub found
456[ 1.306104] hub 1-0:1.0: 5 ports detected
457[ 1.310319] ehci-pci 0000:00:13.2: EHCI Host Controller
458[ 1.315551] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
459[ 1.322947] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
460[ 1.331654] ehci-pci 0000:00:13.2: debug port 1
461[ 1.336213] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014f900
462[ 1.351162] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
463[ 1.356938] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
464[ 1.363724] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
465[ 1.370951] usb usb2: Product: EHCI Host Controller
466[ 1.375834] usb usb2: Manufacturer: Linux 3.10.0-rc1+ ehci_hcd
467[ 1.381673] usb usb2: SerialNumber: 0000:00:13.2
468[ 1.386415] hub 2-0:1.0: USB hub found
469[ 1.390178] hub 2-0:1.0: 5 ports detected
470[ 1.394291] ehci-platform: EHCI generic platform driver
471[ 1.399522] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
472[ 1.405815] ohci_hcd 0000:00:12.0: OHCI Host Controller
473[ 1.411068] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
474[ 1.418490] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf014c000
475[ 1.483289] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
476[ 1.490080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
477[ 1.497309] usb usb3: Product: OHCI Host Controller
478[ 1.502191] usb usb3: Manufacturer: Linux 3.10.0-rc1+ ohci_hcd
479[ 1.508027] usb usb3: SerialNumber: 0000:00:12.0
480[ 1.511263] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
481[ 1.512126] ata1.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
482[ 1.512130] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
483[ 1.513070] ata1.00: configured for UDMA/133
484[ 1.513254] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
485[ 1.513521] sd 0:0:0:0: Attached scsi generic sg0 type 0
486[ 1.513708] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
487[ 1.513816] sd 0:0:0:0: [sda] Write Protect is off
488[ 1.513820] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
489[ 1.513864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
490[ 1.571749] hub 3-0:1.0: USB hub found
491[ 1.575106] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
492[ 1.575818] sd 0:0:0:0: [sda] Attached SCSI disk
493[ 1.585003] hub 3-0:1.0: 5 ports detected
494[ 1.589240] ohci_hcd 0000:00:13.0: OHCI Host Controller
495[ 1.594475] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
496[ 1.601883] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf014d000
497[ 1.667455] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
498[ 1.674251] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
499[ 1.681476] usb usb4: Product: OHCI Host Controller
500[ 1.686359] usb usb4: Manufacturer: Linux 3.10.0-rc1+ ohci_hcd
501[ 1.692198] usb usb4: SerialNumber: 0000:00:13.0
502[ 1.696937] hub 4-0:1.0: USB hub found
503[ 1.700693] hub 4-0:1.0: 5 ports detected
504[ 1.704905] ohci_hcd 0000:00:14.5: OHCI Host Controller
505[ 1.710141] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
506[ 1.717547] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf014e000
507[ 1.779555] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
508[ 1.786353] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
509[ 1.793576] usb usb5: Product: OHCI Host Controller
510[ 1.798461] usb usb5: Manufacturer: Linux 3.10.0-rc1+ ohci_hcd
511[ 1.804301] usb usb5: SerialNumber: 0000:00:14.5
512[ 1.809061] hub 5-0:1.0: USB hub found
513[ 1.812828] hub 5-0:1.0: 2 ports detected
514[ 1.816918] uhci_hcd: USB Universal Host Controller Interface driver
515[ 1.823406] xhci_hcd 0000:00:10.0: xHCI Host Controller
516[ 1.828635] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
517[ 1.836227] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
518[ 1.836233] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
519[ 1.836238] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
520[ 1.836302] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
521[ 1.843093] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
522[ 1.850317] usb usb6: Product: xHCI Host Controller
523[ 1.855200] usb usb6: Manufacturer: Linux 3.10.0-rc1+ xhci_hcd
524[ 1.861038] usb usb6: SerialNumber: 0000:00:10.0
525[ 1.865721] xHCI xhci_add_endpoint called for root hub
526[ 1.865722] xHCI xhci_check_bandwidth called for root hub
527[ 1.865741] hub 6-0:1.0: USB hub found
528[ 1.869505] hub 6-0:1.0: 2 ports detected
529[ 1.873581] xhci_hcd 0000:00:10.0: xHCI Host Controller
530[ 1.878816] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
531[ 1.886242] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
532[ 1.893031] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
533[ 1.900257] usb usb7: Product: xHCI Host Controller
534[ 1.905140] usb usb7: Manufacturer: Linux 3.10.0-rc1+ xhci_hcd
535[ 1.910979] usb usb7: SerialNumber: 0000:00:10.0
536[ 1.915611] tsc: Refined TSC clocksource calibration: 3393.828 MHz
537[ 1.921802] Switching to clocksource tsc
538[ 1.921925] xHCI xhci_add_endpoint called for root hub
539[ 1.921926] xHCI xhci_check_bandwidth called for root hub
540[ 1.921972] hub 7-0:1.0: USB hub found
541[ 1.921982] hub 7-0:1.0: 2 ports detected
542[ 1.943837] xhci_hcd 0000:00:10.1: xHCI Host Controller
543[ 1.949074] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
544[ 1.956666] xhci_hcd 0000:00:10.1: irq 45 for MSI/MSI-X
545[ 1.956671] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
546[ 1.956676] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
547[ 1.956750] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
548[ 1.963535] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
549[ 1.970753] usb usb8: Product: xHCI Host Controller
550[ 1.975630] usb usb8: Manufacturer: Linux 3.10.0-rc1+ xhci_hcd
551[ 1.981468] usb usb8: SerialNumber: 0000:00:10.1
552[ 1.986189] xHCI xhci_add_endpoint called for root hub
553[ 1.986191] xHCI xhci_check_bandwidth called for root hub
554[ 1.986212] hub 8-0:1.0: USB hub found
555[ 1.989973] hub 8-0:1.0: 2 ports detected
556[ 1.994045] xhci_hcd 0000:00:10.1: xHCI Host Controller
557[ 1.999276] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
558[ 2.006701] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
559[ 2.013492] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
560[ 2.020711] usb usb9: Product: xHCI Host Controller
561[ 2.025596] usb usb9: Manufacturer: Linux 3.10.0-rc1+ xhci_hcd
562[ 2.031431] usb usb9: SerialNumber: 0000:00:10.1
563[ 2.036117] xHCI xhci_add_endpoint called for root hub
564[ 2.036118] xHCI xhci_check_bandwidth called for root hub
565[ 2.036136] hub 9-0:1.0: USB hub found
566[ 2.039899] hub 9-0:1.0: 2 ports detected
567[ 2.143970] i8042: PNP: No PS/2 controller found. Probing ports directly.
568[ 2.400198] serio: i8042 KBD port at 0x60,0x64 irq 1
569[ 2.405290] mousedev: PS/2 mouse device common for all mice
570[ 2.410969] rtc_cmos 00:01: RTC can wake from S4
571[ 2.415680] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
572[ 2.421796] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
573[ 2.428910] device-mapper: uevent: version 1.0.3
574[ 2.433593] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
575[ 2.442051] cpuidle: using governor ladder
576[ 2.446190] cpuidle: using governor menu
577[ 2.449045] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
578[ 2.458823] ashmem: initialized
579[ 2.462048] TCP: cubic registered
580[ 2.465449] NET: Registered protocol family 10
581[ 2.470054] NET: Registered protocol family 17
582[ 2.474503] Key type dns_resolver registered
583[ 2.478989] PM: Hibernation image not present or could not be loaded.
584[ 2.479004] registered taskstats version 1
585[ 2.483440] Key type trusted registered
586[ 2.487422] Key type encrypted registered
587[ 2.491821] Magic number: 9:410:97
588[ 2.495517] acpi-cpufreq: overriding BIOS provided _PSD data
589[ 2.501265] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
590[ 2.507276] EDD information not available.
591[ 2.511582] md: Waiting for all devices to be available before autodetect
592[ 2.518375] md: If you don't use raid, use raid=noautodetect
593[ 2.524173] md: Autodetecting RAID arrays.
594[ 2.528272] md: Scanned 0 and added 0 devices.
595[ 2.532718] md: autorun ...
596[ 2.535510] md: ... autorun DONE.
597[ 2.554953] EXT3-fs (sda7): error: couldn't mount because of unsupported optional features (240)
598[ 2.564008] EXT4-fs (sda7): couldn't mount as ext2 due to feature incompatibilities
599[ 2.580479] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
600[ 2.587369] EXT4-fs (sda7): write access will be enabled during recovery
601[ 3.505280] EXT4-fs (sda7): recovery complete
602[ 3.513380] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
603[ 3.521060] VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
604[ 3.567868] devtmpfs: mounted
605[ 3.571496] Freeing unused kernel memory: 1160k freed
606[ 3.576795] Write protecting the kernel read-only data: 12288k
607[ 3.586275] Freeing unused kernel memory: 1624k freed
608[ 3.594372] Freeing unused kernel memory: 1240k freed
609[ 4.315133] init: ureadahead main process (89) terminated with status 5
610[ 5.436839] udevd[169]: starting version 175
611[ 5.692412] lp: driver loaded but no devices found
612[ 5.971953] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
613[ 5.972003] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb20
614[ 5.979151] sdhci: Secure Digital Host Controller Interface driver
615[ 5.979155] sdhci: Copyright(c) Pierre Ossman
616[ 5.981243] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev 0)
617[ 5.981452] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
618[ 6.022837] microcode: CPU0: patch_level=0x0600110f
619[ 6.108269] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
620[ 6.108276] microcode: CPU1: patch_level=0x0600110f
621[ 6.108323] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
622[ 6.157341] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
623[ 6.157584] r8169 0000:03:00.0: irq 48 for MSI/MSI-X
624[ 6.157774] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffc9000073a000, 50:46:5d:8b:97:bf, XID 08000800 IRQ 48
625[ 6.157778] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
626[ 6.489674] [drm] Initialized drm 1.1.0 20060810
627[ 6.846060] hda-intel 0000:00:01.1: Force to non-snoop mode
628[ 6.846096] snd_hda_intel 0000:00:01.1: irq 49 for MSI/MSI-X
629[ 6.877274] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
630[ 6.877356] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
631[ 6.916997] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
632[ 6.917120] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
633[ 6.917223] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
634[ 6.917328] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
635[ 6.917438] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
636[ 6.917543] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
637[ 6.917648] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
638[ 6.917751] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
639[ 7.223299] [drm] radeon kernel modesetting enabled.
640[ 7.223662] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9993 0x1002:0x9993).
641[ 7.223683] [drm] register mmio base: 0xF0100000
642[ 7.223684] [drm] register mmio size: 262144
643[ 7.223732] ATOM BIOS: 113
644[ 7.223815] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
645[ 7.223817] radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
646[ 7.223969] [drm] Detected VRAM RAM=512M, BAR=256M
647[ 7.223972] [drm] RAM width 64bits DDR
648[ 7.224033] [TTM] Zone kernel: Available graphics memory: 1718456 kiB
649[ 7.224035] [TTM] Initializing pool allocator
650[ 7.224041] [TTM] Initializing DMA pool allocator
651[ 7.224062] [drm] radeon: 512M of VRAM memory ready
652[ 7.224063] [drm] radeon: 512M of GTT memory ready.
653[ 7.224078] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
654[ 7.224079] [drm] Driver supports precise vblank timestamp query.
655[ 7.224098] radeon 0000:00:01.0: irq 50 for MSI/MSI-X
656[ 7.224106] radeon 0000:00:01.0: radeon: using MSI.
657[ 7.224377] [drm] radeon: irq initialized.
658[ 7.251470] kvm: Nested Virtualization enabled
659[ 7.251475] kvm: Nested Paging enabled
660[ 7.279625] radeon 0000:00:01.0: radeon_uvd: Can't load firmware "radeon/TAHITI_uvd.bin"
661[ 7.287821] [drm] GART: num cpu pages 131072, num gpu pages 131072
662[ 7.288929] [drm] Loading ARUBA Microcode
663[ 7.328750] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
664[ 7.328872] radeon 0000:00:01.0: WB enabled
665[ 7.328875] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880119bd9c00
666[ 7.328878] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff880119bd9c04
667[ 7.328880] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff880119bd9c08
668[ 7.328882] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880119bd9c0c
669[ 7.328884] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff880119bd9c10
670[ 7.348009] [drm] ring test on 0 succeeded in 2 usecs
671[ 7.348071] [drm] ring test on 3 succeeded in 2 usecs
672[ 7.348079] [drm] ring test on 4 succeeded in 1 usecs
673[ 7.349555] [drm] ib test on ring 0 succeeded in 0 usecs
674[ 7.350077] [drm] ib test on ring 3 succeeded in 0 usecs
675[ 7.350598] [drm] ib test on ring 4 succeeded in 1 usecs
676[ 7.351879] [drm] Radeon Display Connectors
677[ 7.351882] [drm] Connector 0:
678[ 7.351883] [drm] HDMI-A-1
679[ 7.351885] [drm] HPD1
680[ 7.351887] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
681[ 7.351888] [drm] Encoders:
682[ 7.351889] [drm] DFP1: INTERNAL_UNIPHY2
683[ 7.351890] [drm] Connector 1:
684[ 7.351892] [drm] VGA-1
685[ 7.351893] [drm] HPD2
686[ 7.351894] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
687[ 7.351896] [drm] Encoders:
688[ 7.351897] [drm] CRT1: INTERNAL_UNIPHY2
689[ 7.351897] [drm] CRT1: NUTMEG
690[ 7.351898] [drm] Connector 2:
691[ 7.351899] [drm] DVI-D-1
692[ 7.351900] [drm] HPD3
693[ 7.351901] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
694[ 7.351902] [drm] Encoders:
695[ 7.351903] [drm] DFP2: INTERNAL_UNIPHY
696[ 7.401911] [drm] Internal thermal controller without fan control
697[ 7.401929] [drm] radeon: power management initialized
698[ 7.532829] [drm] fb mappable at 0xE114C000
699[ 7.532833] [drm] vram apper at 0xE0000000
700[ 7.532834] [drm] size 5242880
701[ 7.532835] [drm] fb depth is 24
702[ 7.532837] [drm] pitch is 5120
703[ 7.532959] fbcon: radeondrmfb (fb0) is primary device
704[ 7.609884] Console: switching to colour frame buffer device 160x64
705[ 7.612615] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
706[ 7.612617] radeon 0000:00:01.0: registered panic notifier
707[ 7.612622] [drm] Initialized radeon 2.33.0 20080528 for 0000:00:01.0 on minor 0
708[ 7.686365] init: plymouth main process (90) killed by ABRT signal
709[ 7.686819] init: plymouth-splash main process (452) terminated with status 2
710[ 8.419213] Adding 979928k swap on /dev/sda6. Priority:-1 extents:1 across:979928k FS
711[ 8.688520] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
712[ 9.120479] init: plymouth-log main process (521) terminated with status 1
713[ 9.134064] init: failsafe main process (522) killed by TERM signal
714[ 10.545768] init: plymouth-upstart-bridge main process (611) terminated with status 1
715[ 10.879904] ppdev: user-space parallel port driver
716[ 11.323836] Bluetooth: Core ver 2.16
717[ 11.323859] NET: Registered protocol family 31
718[ 11.323861] Bluetooth: HCI device and connection manager initialized
719[ 11.323870] Bluetooth: HCI socket layer initialized
720[ 11.323873] Bluetooth: L2CAP socket layer initialized
721[ 11.323879] Bluetooth: SCO socket layer initialized
722[ 11.510372] Bluetooth: RFCOMM TTY layer initialized
723[ 11.510384] Bluetooth: RFCOMM socket layer initialized
724[ 11.510386] Bluetooth: RFCOMM ver 1.11
725[ 11.702327] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
726[ 11.702331] Bluetooth: BNEP filters: protocol multicast
727[ 11.702340] Bluetooth: BNEP socket layer initialized
728[ 13.665280] r8169 0000:03:00.0 eth0: link down
729[ 13.665299] r8169 0000:03:00.0 eth0: link down
730[ 13.665327] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
731[ 15.354291] cpufreq_ondemand: od_init: tuners ffff880113834040
732[ 16.026334] r8169 0000:03:00.0 eth0: link up
733[ 16.026350] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
734[ 16.973751] init: plymouth-stop pre-start process (1168) terminated with status 1