blob: de53e6671ad32fe3683548d5df4ccc38f29c6681 [file] [log] [blame]
Denis 'GNUtoo' Cariklib58cd0d2019-01-06 15:15:41 +01001[ 0.000000] Linux version 4.19.8-gnu-1 (builduser@parabola) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Wed Dec 12 21:16:13 UTC 2018
2[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/m4a785t_m-rootfs rw cryptkey=rootfs:/etc/keys/internal.key cryptdevice=/dev/disk/by-uuid/4263b22d-debb-4d62-ba87-6965231a8d39:luks_lvm quiet console=ttyS0,115200 root=/dev/mapper/m4a785t_m-rootfs nopat iomem=relaxed panic=1
3[ 0.000000] KERNEL supported cpus:
4[ 0.000000] Intel GenuineIntel
5[ 0.000000] AMD AuthenticAMD
6[ 0.000000] Centaur CentaurHauls
7[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
8[ 0.000000] BIOS-provided physical RAM map:
9[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
10[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ffa8fff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000006ffa9000-0x000000007fffffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb00fff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
18[ 0.000000] x86/PAT: PAT support disabled.
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: ASUS M4A785T-M/M4A785T-M, BIOS 4.9-147-gad7674ed00 01/04/2019
22[ 0.000000] tsc: Fast TSC calibration using PIT
Denis 'GNUtoo' Carikli48212202019-01-06 18:18:04 +010023[ 0.000000] tsc: Detected 3007.580 MHz processor
24[ 0.000432] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Denis 'GNUtoo' Cariklib58cd0d2019-01-06 15:15:41 +010025[ 0.000435] e820: remove [mem 0x000a0000-0x000fffff] usable
Denis 'GNUtoo' Carikli48212202019-01-06 18:18:04 +010026[ 0.008449] AGP: No AGP bridge found
27[ 0.008521] last_pfn = 0x6ffa9 max_arch_pfn = 0x400000000
28[ 0.008524] MTRR default type: uncachable
29[ 0.008525] MTRR fixed ranges enabled:
30[ 0.008527] 00000-9FFFF write-back
31[ 0.008528] A0000-BFFFF uncachable
32[ 0.008529] C0000-FFFFF write-back
33[ 0.008529] MTRR variable ranges enabled:
34[ 0.008531] 0 base 000000000000 mask FFFF80000000 write-back
35[ 0.008532] 1 base 000070000000 mask FFFFF0000000 uncachable
36[ 0.008534] 2 base 0000A8000000 mask FFFFF8000000 write-combining
37[ 0.008534] 3 disabled
38[ 0.008535] 4 disabled
39[ 0.008535] 5 disabled
40[ 0.008536] 6 disabled
41[ 0.008536] 7 disabled
42[ 0.008735] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
43[ 0.010873] found SMP MP-table at [mem 0x000f6130-0x000f613f] mapped at [(____ptrval____)]
44[ 0.010978] Scanning 1 areas for low memory corruption
45[ 0.010980] Base memory trampoline at [(____ptrval____)] 99000 size 24576
46[ 0.010984] Using GB pages for direct mapping
47[ 0.010986] BRK [0x5a201000, 0x5a201fff] PGTABLE
48[ 0.010988] BRK [0x5a202000, 0x5a202fff] PGTABLE
49[ 0.010989] BRK [0x5a203000, 0x5a203fff] PGTABLE
50[ 0.011007] BRK [0x5a204000, 0x5a204fff] PGTABLE
51[ 0.011009] BRK [0x5a205000, 0x5a205fff] PGTABLE
52[ 0.011079] BRK [0x5a206000, 0x5a206fff] PGTABLE
53[ 0.011097] RAMDISK: [mem 0x36801000-0x373f7fff]
54[ 0.011103] ACPI: Early table checksum verification disabled
55[ 0.011159] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4)
56[ 0.011163] ACPI: XSDT 0x000000006FFAA0E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
57[ 0.011169] ACPI: FACP 0x000000006FFACB20 0000F4 (v03 COREv4 COREBOOT 00000000 CORE 00000000)
58[ 0.011175] ACPI: DSDT 0x000000006FFAA280 002892 (v02 COREv4 COREBOOT 00010001 INTL 20150619)
59[ 0.011178] ACPI: FACS 0x000000006FFAA240 000040
60[ 0.011180] ACPI: FACS 0x000000006FFAA240 000040
61[ 0.011183] ACPI: SSDT 0x000000006FFACC20 000862 (v02 COREv4 COREBOOT 0000002A CORE 0000002A)
62[ 0.011186] ACPI: APIC 0x000000006FFAD490 00005C (v02 COREv4 COREBOOT 00000000 CORE 00000000)
63[ 0.011188] ACPI: SRAT 0x000000006FFAD4F0 0000A0 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
64[ 0.011191] ACPI: SLIT 0x000000006FFAD590 00002D (v01 COREv4 COREBOOT 00000000 CORE 00000000)
65[ 0.011194] ACPI: HPET 0x000000006FFAD5C0 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
66[ 0.011197] ACPI: SRAT 0x000000006FFAD600 0000A0 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
67[ 0.011200] ACPI: SLIT 0x000000006FFAD6A0 00002D (v01 COREv4 COREBOOT 00000000 CORE 00000000)
68[ 0.011207] ACPI: Local APIC address 0xfee00000
69[ 0.011249] SRAT: PXM 0 -> APIC 0x00 -> Node 0
70[ 0.011250] SRAT: PXM 0 -> APIC 0x01 -> Node 0
71[ 0.011252] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
72[ 0.011253] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
73[ 0.011255] NUMA: Initialized distance table, cnt=1
74[ 0.011257] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x6ffa8fff] -> [mem 0x00000000-0x6ffa8fff]
75[ 0.011260] NODE_DATA(0) allocated [mem 0x6ffa4000-0x6ffa7fff]
76[ 0.011289] Zone ranges:
77[ 0.011290] DMA [mem 0x0000000000001000-0x0000000000ffffff]
78[ 0.011291] DMA32 [mem 0x0000000001000000-0x000000006ffa8fff]
79[ 0.011292] Normal empty
80[ 0.011293] Device empty
81[ 0.011294] Movable zone start for each node
82[ 0.011295] Early memory node ranges
83[ 0.011296] node 0: [mem 0x0000000000001000-0x000000000009efff]
84[ 0.011297] node 0: [mem 0x0000000000100000-0x000000006ffa8fff]
85[ 0.011305] Reserved but unavailable: 185 pages
86[ 0.011306] Initmem setup node 0 [mem 0x0000000000001000-0x000000006ffa8fff]
87[ 0.011307] On node 0 totalpages: 458567
88[ 0.011308] DMA zone: 64 pages used for memmap
89[ 0.011309] DMA zone: 21 pages reserved
90[ 0.011310] DMA zone: 3998 pages, LIFO batch:0
91[ 0.011395] DMA32 zone: 7103 pages used for memmap
92[ 0.011396] DMA32 zone: 454569 pages, LIFO batch:63
93[ 0.023641] ACPI: PM-Timer IO Port: 0x820
94[ 0.023643] ACPI: Local APIC address 0xfee00000
95[ 0.023657] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
96[ 0.023659] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
97[ 0.023661] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
98[ 0.023662] ACPI: IRQ0 used by override.
99[ 0.023663] ACPI: IRQ9 used by override.
100[ 0.023665] Using ACPI (MADT) for SMP configuration information
101[ 0.023666] ACPI: HPET id: 0x43538301 base: 0xfed00000
102[ 0.023670] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
103[ 0.023683] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
104[ 0.023685] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
105[ 0.023685] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
106[ 0.023686] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
107[ 0.023688] [mem 0x80000000-0xbfffffff] available for PCI devices
108[ 0.023689] Booting paravirtualized kernel on bare hardware
109[ 0.023692] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
110[ 0.162352] random: get_random_bytes called from start_kernel+0x95/0x545 with crng_init=0
111[ 0.162361] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:2 nr_node_ids:1
112[ 0.163004] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u1048576
113[ 0.163010] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
114[ 0.163011] pcpu-alloc: [0] 0 1
115[ 0.163029] Built 1 zonelists, mobility grouping on. Total pages: 451379
116[ 0.163030] Policy zone: DMA32
117[ 0.163032] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/m4a785t_m-rootfs rw cryptkey=rootfs:/etc/keys/internal.key cryptdevice=/dev/disk/by-uuid/4263b22d-debb-4d62-ba87-6965231a8d39:luks_lvm quiet console=ttyS0,115200 root=/dev/mapper/m4a785t_m-rootfs nopat iomem=relaxed panic=1
118[ 0.163143] AGP: Checking aperture...
119[ 0.171154] AGP: No AGP bridge found
120[ 0.171156] AGP: Node 0: aperture [bus addr 0xbc000000-0xbfffffff] (64MB)
121[ 0.182670] Memory: 1763716K/1834268K available (12300K kernel code, 1374K rwdata, 3620K rodata, 1528K init, 3868K bss, 70552K reserved, 0K cma-reserved)
122[ 0.182818] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
123[ 0.182827] ftrace: allocating 35506 entries in 139 pages
124[ 0.196126] rcu: Preemptible hierarchical RCU implementation.
125[ 0.196128] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
126[ 0.196128] rcu: RCU dyntick-idle grace-period acceleration is enabled.
127[ 0.196129] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
128[ 0.196130] rcu: RCU priority boosting: priority 1 delay 500 ms.
129[ 0.196131] Tasks RCU enabled.
130[ 0.196132] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
131[ 0.198027] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
132[ 0.198299] rcu: Offload RCU callbacks from CPUs: (none).
133[ 0.198339] spurious 8259A interrupt: IRQ7.
134[ 0.198524] Console: colour dummy device 80x25
135[ 0.198548] console [ttyS0] enabled
136[ 0.198566] ACPI: Core revision 20180810
137[ 0.198729] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
138[ 0.198743] hpet clockevent registered
139[ 0.198748] APIC: Switch to symmetric I/O mode setup
140[ 0.199160] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
141[ 0.215414] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b5a3dbafb9, max_idle_ns: 440795235721 ns
142[ 0.215426] Calibrating delay loop (skipped), value calculated using timer frequency.. 6017.79 BogoMIPS (lpj=10025266)
143[ 0.215428] pid_max: default: 32768 minimum: 301
144[ 0.215470] Security Framework initialized
145[ 0.215472] Yama: becoming mindful.
146[ 0.215477] AppArmor: AppArmor disabled by boot time parameter
147[ 0.216107] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
148[ 0.216457] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
149[ 0.216485] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
150[ 0.216497] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
151[ 0.216746] mce: CPU supports 6 MCE banks
152[ 0.216752] LVT offset 0 assigned for vector 0xf9
153[ 0.216756] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
154[ 0.216757] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
155[ 0.216759] Spectre V2 : Mitigation: Full AMD retpoline
156[ 0.216760] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
157[ 0.216887] Freeing SMP alternatives memory: 28K
158[ 0.218749] smpboot: CPU0: AMD Athlon(tm) II X2 250 Processor (family: 0x10, model: 0x6, stepping: 0x2)
159[ 0.235423] Performance Events: AMD PMU driver.
160[ 0.235428] ... version: 0
161[ 0.235428] ... bit width: 48
162[ 0.235429] ... generic registers: 4
163[ 0.235429] ... value mask: 0000ffffffffffff
164[ 0.235430] ... max period: 00007fffffffffff
165[ 0.235430] ... fixed-purpose events: 0
166[ 0.235431] ... event mask: 000000000000000f
167[ 0.242087] rcu: Hierarchical SRCU implementation.
168[ 0.265428] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
169[ 0.272090] smp: Bringing up secondary CPUs ...
170[ 0.312098] x86: Booting SMP configuration:
171[ 0.312100] .... node #0, CPUs: #1
172[ 0.003764] do_IRQ: 1.55 No irq handler for vector
173[ 0.318811] smp: Brought up 1 node, 2 CPUs
174[ 0.318811] smpboot: Max logical packages: 1
175[ 0.318811] smpboot: Total of 2 processors activated (12035.58 BogoMIPS)
176[ 0.319264] devtmpfs: initialized
177[ 0.319264] x86/mm: Memory block size: 128MB
178[ 0.319264] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
179[ 0.319264] futex hash table entries: 512 (order: 3, 32768 bytes)
180[ 0.319264] pinctrl core: initialized pinctrl subsystem
181[ 0.319264] RTC time: 17:11:38, date: 01/06/19
182[ 0.319264] NET: Registered protocol family 16
183[ 0.319264] audit: initializing netlink subsys (disabled)
184[ 0.319264] audit: type=2000 audit(1546794698.119:1): state=initialized audit_enabled=0 res=1
185[ 0.322095] cpuidle: using governor ladder
186[ 0.322098] cpuidle: using governor menu
187[ 0.322098] node 0 link 0: io port [1000, 4fff]
188[ 0.322098] TOM: 0000000080000000 aka 2048M
189[ 0.322098] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
190[ 0.322098] node 0 link 0: mmio [b4000000, b84fffff]
191[ 0.322098] node 0 link 0: mmio [a8000000, b00fffff]
192[ 0.322098] bus: [bus 00-03] on node 0 link 0
193[ 0.322099] bus: 00 [io 0x0000-0xffff]
194[ 0.322100] bus: 00 [mem 0xb0100000-0xbfffffff]
195[ 0.322101] bus: 00 [mem 0x80000000-0xb00fffff]
196[ 0.322101] bus: 00 [mem 0xd0000000-0xfcffffffff]
197[ 0.322135] ACPI: bus type PCI registered
198[ 0.322137] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
199[ 0.322197] PCI: Using configuration type 1 for base access
200[ 0.322197] PCI: Using configuration type 1 for extended access
201[ 0.323025] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
202[ 0.323025] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
203[ 0.323025] ACPI: Added _OSI(Module Device)
204[ 0.323025] ACPI: Added _OSI(Processor Device)
205[ 0.323025] ACPI: Added _OSI(3.0 _SCP Extensions)
206[ 0.323025] ACPI: Added _OSI(Processor Aggregator Device)
207[ 0.323025] ACPI: Added _OSI(Linux-Dell-Video)
208[ 0.323025] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
209[ 0.327097] ACPI: 2 ACPI AML tables successfully acquired and loaded
210[ 0.328648] ACPI: Interpreter enabled
211[ 0.328666] ACPI: (supports S0 S1 S4 S5)
212[ 0.328667] ACPI: Using IOAPIC for interrupt routing
213[ 0.328679] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
214[ 0.328846] ACPI: Enabled 19 GPEs in block 00 to 1F
215[ 0.331604] ACPI: Power Resource [PFN0] (on)
216[ 0.331791] acpi LNXCPU:00: Failed to get unique processor _UID (0x0)
217[ 0.331796] acpi LNXCPU:01: Failed to get unique processor _UID (0x1)
218[ 0.331808] acpi LNXCPU:04: Failed to get unique processor _UID (0x0)
219[ 0.331813] acpi LNXCPU:05: Failed to get unique processor _UID (0x1)
220[ 0.331870] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
221[ 0.331936] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
222[ 0.332001] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
223[ 0.332065] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
224[ 0.332150] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
225[ 0.332215] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
226[ 0.332278] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
227[ 0.332348] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
228[ 0.332416] acpi PNP0A03:00: [Firmware Bug]: no secondary bus range in _CRS
229[ 0.332424] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
230[ 0.332428] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
231[ 0.332433] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
232[ 0.332707] PCI host bridge to bus 0000:00
233[ 0.332709] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
234[ 0.332710] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
235[ 0.332712] pci_bus 0000:00: root bus resource [mem 0x00000000-0x0009ffff]
236[ 0.332713] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
237[ 0.332714] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
238[ 0.332715] pci_bus 0000:00: root bus resource [bus 00-ff]
239[ 0.332724] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
240[ 0.332836] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
241[ 0.332943] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
242[ 0.332958] pci 0000:00:0a.0: enabling Extended Tags
243[ 0.332980] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
244[ 0.333074] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
245[ 0.333092] pci 0000:00:11.0: reg 0x10: [io 0x4020-0x4027]
246[ 0.333101] pci 0000:00:11.0: reg 0x14: [io 0x4040-0x4043]
247[ 0.333109] pci 0000:00:11.0: reg 0x18: [io 0x4028-0x402f]
248[ 0.333117] pci 0000:00:11.0: reg 0x1c: [io 0x4044-0x4047]
249[ 0.333126] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
250[ 0.333134] pci 0000:00:11.0: reg 0x24: [mem 0xb8409000-0xb84093ff]
251[ 0.333154] pci 0000:00:11.0: set SATA to AHCI mode
252[ 0.333251] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
253[ 0.333267] pci 0000:00:12.0: reg 0x10: [mem 0xb8404000-0xb8404fff]
254[ 0.333390] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
255[ 0.333406] pci 0000:00:12.1: reg 0x10: [mem 0xb8405000-0xb8405fff]
256[ 0.333531] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
257[ 0.333551] pci 0000:00:12.2: reg 0x10: [mem 0xb840a000-0xb840a0ff]
258[ 0.333625] pci 0000:00:12.2: supports D1 D2
259[ 0.333626] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
260[ 0.333712] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
261[ 0.333728] pci 0000:00:13.0: reg 0x10: [mem 0xb8406000-0xb8406fff]
262[ 0.333859] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
263[ 0.333875] pci 0000:00:13.1: reg 0x10: [mem 0xb8407000-0xb8407fff]
264[ 0.334010] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
265[ 0.334029] pci 0000:00:13.2: reg 0x10: [mem 0xb840b000-0xb840b0ff]
266[ 0.334103] pci 0000:00:13.2: supports D1 D2
267[ 0.334105] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
268[ 0.334197] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
269[ 0.334354] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
270[ 0.334371] pci 0000:00:14.1: reg 0x10: [io 0x4030-0x4037]
271[ 0.334379] pci 0000:00:14.1: reg 0x14: [io 0x4048-0x404b]
272[ 0.334387] pci 0000:00:14.1: reg 0x18: [io 0x4038-0x403f]
273[ 0.334395] pci 0000:00:14.1: reg 0x1c: [io 0x404c-0x404f]
274[ 0.334403] pci 0000:00:14.1: reg 0x20: [io 0x4010-0x401f]
275[ 0.334421] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
276[ 0.334422] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
277[ 0.334423] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
278[ 0.334424] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
279[ 0.334509] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
280[ 0.334531] pci 0000:00:14.2: reg 0x10: [mem 0xb8400000-0xb8403fff 64bit]
281[ 0.334594] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
282[ 0.334677] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
283[ 0.334819] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
284[ 0.334934] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
285[ 0.334951] pci 0000:00:14.5: reg 0x10: [mem 0xb8408000-0xb8408fff]
286[ 0.335079] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
287[ 0.335154] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
288[ 0.335228] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
289[ 0.335302] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
290[ 0.335378] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
291[ 0.335470] pci_bus 0000:01: extended config space not accessible
292[ 0.335493] pci 0000:01:05.0: [1002:9710] type 00 class 0x030000
293[ 0.335500] pci 0000:01:05.0: reg 0x10: [mem 0xa8000000-0xafffffff pref]
294[ 0.335504] pci 0000:01:05.0: reg 0x14: [io 0x1000-0x10ff]
295[ 0.335508] pci 0000:01:05.0: reg 0x18: [mem 0xb8100000-0xb810ffff]
296[ 0.335518] pci 0000:01:05.0: reg 0x24: [mem 0xb8000000-0xb80fffff]
297[ 0.335536] pci 0000:01:05.0: supports D1 D2
298[ 0.335589] pci 0000:00:01.0: PCI bridge to [bus 01]
299[ 0.335591] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
300[ 0.335593] pci 0000:00:01.0: bridge window [mem 0xb8000000-0xb81fffff]
301[ 0.335595] pci 0000:00:01.0: bridge window [mem 0xa8000000-0xafffffff 64bit pref]
302[ 0.335630] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
303[ 0.335650] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
304[ 0.335673] pci 0000:02:00.0: reg 0x18: [mem 0xb0004000-0xb0004fff 64bit pref]
305[ 0.335685] pci 0000:02:00.0: reg 0x20: [mem 0xb0000000-0xb0003fff 64bit pref]
306[ 0.335692] pci 0000:02:00.0: reg 0x30: [mem 0xb8200000-0xb820ffff pref]
307[ 0.335752] pci 0000:02:00.0: supports D1 D2
308[ 0.335753] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.335841] pci 0000:00:0a.0: PCI bridge to [bus 02]
310[ 0.335844] pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff]
311[ 0.335845] pci 0000:00:0a.0: bridge window [mem 0xb8200000-0xb82fffff]
312[ 0.335848] pci 0000:00:0a.0: bridge window [mem 0xb0000000-0xb00fffff 64bit pref]
313[ 0.335858] pci_bus 0000:03: extended config space not accessible
314[ 0.335889] pci 0000:03:05.0: [168c:0029] type 00 class 0x028000
315[ 0.335909] pci 0000:03:05.0: reg 0x10: [mem 0xb8380000-0xb838ffff]
316[ 0.336006] pci 0000:03:05.0: PME# supported from D0 D3hot
317[ 0.336053] pci 0000:03:06.0: [1095:0680] type 00 class 0x01018f
318[ 0.336073] pci 0000:03:06.0: reg 0x10: [io 0x3010-0x3017]
319[ 0.336084] pci 0000:03:06.0: reg 0x14: [io 0x3020-0x3023]
320[ 0.336094] pci 0000:03:06.0: reg 0x18: [io 0x3018-0x301f]
321[ 0.336105] pci 0000:03:06.0: reg 0x1c: [io 0x3024-0x3027]
322[ 0.336115] pci 0000:03:06.0: reg 0x20: [io 0x3000-0x300f]
323[ 0.336126] pci 0000:03:06.0: reg 0x24: [mem 0xb8390000-0xb83900ff]
324[ 0.336137] pci 0000:03:06.0: reg 0x30: [mem 0xb8300000-0xb837ffff pref]
325[ 0.336173] pci 0000:03:06.0: supports D1 D2
326[ 0.336239] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
327[ 0.336243] pci 0000:00:14.4: bridge window [io 0x3000-0x3fff]
328[ 0.336246] pci 0000:00:14.4: bridge window [mem 0xb8300000-0xb83fffff]
329[ 0.336249] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
330[ 0.336250] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
331[ 0.336252] pci 0000:00:14.4: bridge window [mem 0x00000000-0x0009ffff] (subtractive decode)
332[ 0.336253] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
333[ 0.336254] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
334[ 0.336618] pci 0000:01:05.0: vgaarb: setting as boot VGA device
335[ 0.336618] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
336[ 0.336618] pci 0000:01:05.0: vgaarb: bridge control possible
337[ 0.336618] vgaarb: loaded
338[ 0.336618] ACPI: bus type USB registered
339[ 0.336618] usbcore: registered new interface driver usbfs
340[ 0.336618] usbcore: registered new interface driver hub
341[ 0.336618] usbcore: registered new device driver usb
342[ 0.336618] pps_core: LinuxPPS API ver. 1 registered
343[ 0.336618] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
344[ 0.336618] PTP clock support registered
345[ 0.336618] EDAC MC: Ver: 3.0.0
346[ 0.338784] PCI: Using ACPI for IRQ routing
347[ 0.338784] PCI: pci_cache_line_size set to 64 bytes
348[ 0.338829] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
349[ 0.338830] e820: reserve RAM buffer [mem 0x6ffa9000-0x6fffffff]
350[ 0.338925] NetLabel: Initializing
351[ 0.338926] NetLabel: domain hash size = 128
352[ 0.338926] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
353[ 0.338939] NetLabel: unlabeled traffic allowed by default
354[ 0.338945] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
355[ 0.338945] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
356[ 0.340866] clocksource: Switched to clocksource tsc-early
357[ 0.351855] VFS: Disk quotas dquot_6.6.0
358[ 0.351872] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
359[ 0.351931] pnp: PnP ACPI init
360[ 0.352246] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
361[ 0.352276] pnp: PnP ACPI: found 1 devices
362[ 0.359454] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
363[ 0.359480] pci 0000:00:01.0: PCI bridge to [bus 01]
364[ 0.359483] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
365[ 0.359485] pci 0000:00:01.0: bridge window [mem 0xb8000000-0xb81fffff]
366[ 0.359487] pci 0000:00:01.0: bridge window [mem 0xa8000000-0xafffffff 64bit pref]
367[ 0.359490] pci 0000:00:0a.0: PCI bridge to [bus 02]
368[ 0.359491] pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff]
369[ 0.359493] pci 0000:00:0a.0: bridge window [mem 0xb8200000-0xb82fffff]
370[ 0.359495] pci 0000:00:0a.0: bridge window [mem 0xb0000000-0xb00fffff 64bit pref]
371[ 0.359498] pci 0000:00:14.4: PCI bridge to [bus 03]
372[ 0.359500] pci 0000:00:14.4: bridge window [io 0x3000-0x3fff]
373[ 0.359504] pci 0000:00:14.4: bridge window [mem 0xb8300000-0xb83fffff]
374[ 0.359513] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
375[ 0.359514] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
376[ 0.359516] pci_bus 0000:00: resource 6 [mem 0x00000000-0x0009ffff]
377[ 0.359517] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
378[ 0.359518] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
379[ 0.359519] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
380[ 0.359521] pci_bus 0000:01: resource 1 [mem 0xb8000000-0xb81fffff]
381[ 0.359522] pci_bus 0000:01: resource 2 [mem 0xa8000000-0xafffffff 64bit pref]
382[ 0.359523] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
383[ 0.359524] pci_bus 0000:02: resource 1 [mem 0xb8200000-0xb82fffff]
384[ 0.359525] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb00fffff 64bit pref]
385[ 0.359527] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
386[ 0.359528] pci_bus 0000:03: resource 1 [mem 0xb8300000-0xb83fffff]
387[ 0.359529] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
388[ 0.359530] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
389[ 0.359531] pci_bus 0000:03: resource 6 [mem 0x00000000-0x0009ffff]
390[ 0.359532] pci_bus 0000:03: resource 7 [mem 0x000a0000-0x000bffff]
391[ 0.359533] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
392[ 0.359603] NET: Registered protocol family 2
393[ 0.359779] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
394[ 0.359790] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
395[ 0.359838] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
396[ 0.359914] TCP: Hash tables configured (established 16384 bind 16384)
397[ 0.359964] UDP hash table entries: 1024 (order: 3, 32768 bytes)
398[ 0.359979] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
399[ 0.360026] NET: Registered protocol family 1
400[ 0.360031] NET: Registered protocol family 44
401[ 0.360037] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
402[ 0.360790] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
403[ 0.360799] PCI: CLS 64 bytes, default 64
404[ 0.360844] Unpacking initramfs...
405[ 1.595519] Freeing initrd memory: 12252K
406[ 1.595572] LVT offset 1 assigned for vector 0x400
407[ 1.595583] LVT offset 1 assigned
408[ 1.595636] perf: AMD IBS detected (0x0000001f)
409[ 1.595704] Scanning for low memory corruption every 60 seconds
410[ 1.596250] Initialise system trusted keyrings
411[ 1.596260] Key type blacklist registered
412[ 1.596321] workingset: timestamp_bits=41 max_order=19 bucket_order=0
413[ 1.597679] zbud: loaded
414[ 1.597858] pstore: using zstd compression
415[ 1.599484] Key type asymmetric registered
416[ 1.599486] Asymmetric key parser 'x509' registered
417[ 1.599504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
418[ 1.599551] io scheduler noop registered
419[ 1.599552] io scheduler deadline registered
420[ 1.599596] io scheduler cfq registered (default)
421[ 1.599597] io scheduler mq-deadline registered
422[ 1.599598] io scheduler kyber registered
423[ 1.599624] io scheduler bfq registered
424[ 1.599871] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
425[ 1.600000] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
426[ 1.600014] ACPI: Power Button [PWRB]
427[ 1.600051] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
428[ 1.600057] ACPI: Power Button [PWRF]
429[ 1.648856] thermal LNXTHERM:00: registered as thermal_zone0
430[ 1.648857] ACPI: Thermal Zone [TZ00] (40 C)
431[ 1.648990] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
432[ 1.669673] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
433[ 1.670358] usbcore: registered new interface driver usbserial_generic
434[ 1.670363] usbserial: USB Serial support registered for generic
435[ 1.670383] rtc_cmos 00:00: RTC can wake from S4
436[ 1.670507] rtc_cmos 00:00: registered as rtc0
437[ 1.670522] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
438[ 1.670577] ledtrig-cpu: registered to indicate activity on CPUs
439[ 1.670812] NET: Registered protocol family 10
440[ 1.674134] Segment Routing with IPv6
441[ 1.674162] NET: Registered protocol family 17
442[ 1.674363] RAS: Correctable Errors collector initialized.
443[ 1.674375] sched_clock: Marking stable (1673872320, 431552)->(1783594119, -109290247)
444[ 1.674570] registered taskstats version 1
445[ 1.674577] Loading compiled-in X.509 certificates
446[ 1.677238] Loaded X.509 cert 'Build time autogenerated kernel key: fb6c08aabbe307145a2a8acd775b31ca81ee7734'
447[ 1.677267] zswap: loaded using pool lzo/zbud
448[ 1.680363] Key type big_key registered
449[ 1.680652] Magic number: 3:837:187
450[ 1.680728] rtc_cmos 00:00: setting system clock to 2019-01-06 17:11:40 UTC (1546794700)
451[ 1.683382] Freeing unused decrypted memory: 2040K
452[ 1.684594] Freeing unused kernel image memory: 1528K
453[ 1.684598] Write protecting the kernel read-only data: 18432k
454[ 1.685611] Freeing unused kernel image memory: 2008K
455[ 1.685815] Freeing unused kernel image memory: 476K
456[ 1.696205] x86/mm: Checked W+X mappings: passed, no W+X pages found.
457[ 1.696212] Run /init as init process
458[ 1.716750] Linux agpgart interface v0.103
459[ 1.762751] VFIO - User Level meta-driver version: 0.3
460[ 1.873566] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
461[ 1.876218] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
462[ 1.876218] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
463[ 1.877394] ehci-pci: EHCI PCI platform driver
464[ 1.877580] ehci-pci 0000:00:12.2: EHCI Host Controller
465[ 1.877589] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
466[ 1.877594] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
467[ 1.877603] ehci-pci 0000:00:12.2: debug port 1
468[ 1.877647] ehci-pci 0000:00:12.2: irq 17, io mem 0xb840a000
469[ 1.881915] SCSI subsystem initialized
470[ 1.888794] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
471[ 1.888857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
472[ 1.888859] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
473[ 1.888860] usb usb1: Product: EHCI Host Controller
474[ 1.888861] usb usb1: Manufacturer: Linux 4.19.8-gnu-1 ehci_hcd
475[ 1.888862] usb usb1: SerialNumber: 0000:00:12.2
476[ 1.889017] hub 1-0:1.0: USB hub found
477[ 1.889024] hub 1-0:1.0: 6 ports detected
478[ 1.889350] ehci-pci 0000:00:13.2: EHCI Host Controller
479[ 1.889355] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
480[ 1.889359] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
481[ 1.889368] ehci-pci 0000:00:13.2: debug port 1
482[ 1.889408] ehci-pci 0000:00:13.2: irq 19, io mem 0xb840b000
483[ 1.899469] libata version 3.00 loaded.
484[ 1.902101] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
485[ 1.902173] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
486[ 1.902174] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
487[ 1.902175] usb usb2: Product: EHCI Host Controller
488[ 1.902176] usb usb2: Manufacturer: Linux 4.19.8-gnu-1 ehci_hcd
489[ 1.902178] usb usb2: SerialNumber: 0000:00:13.2
490[ 1.902297] hub 2-0:1.0: USB hub found
491[ 1.902304] hub 2-0:1.0: 6 ports detected
492[ 1.903687] ohci-pci: OHCI PCI platform driver
493[ 1.903834] ohci-pci 0000:00:12.0: OHCI PCI host controller
494[ 1.903841] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
495[ 1.903876] ohci-pci 0000:00:12.0: irq 16, io mem 0xb8404000
496[ 1.909457] pata_sil680 0000:03:06.0: version 0.4.9
497[ 1.909581] sil680: 133MHz clock.
498[ 1.916521] ahci 0000:00:11.0: version 3.0
499[ 1.916704] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
500[ 1.916706] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part ccc sxs
501[ 1.917205] scsi host0: pata_sil680
502[ 1.917403] scsi host3: pata_sil680
503[ 1.917446] ata1: PATA max UDMA/133 cmd 0x3010 ctl 0x3020 bmdma 0x3000 irq 21
504[ 1.917447] ata2: PATA max UDMA/133 cmd 0x3018 ctl 0x3024 bmdma 0x3008 irq 21
505[ 1.917463] scsi host2: ahci
506[ 1.918162] scsi host1: pata_atiixp
507[ 1.919281] scsi host5: pata_atiixp
508[ 1.919324] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4010 irq 14
509[ 1.919325] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4018 irq 15
510[ 1.921128] scsi host4: ahci
511[ 1.922300] scsi host6: ahci
512[ 1.922462] scsi host7: ahci
513[ 1.922545] ata5: SATA max UDMA/133 abar m1024@0xb8409000 port 0xb8409100 irq 22
514[ 1.922548] ata6: SATA max UDMA/133 abar m1024@0xb8409000 port 0xb8409180 irq 22
515[ 1.922550] ata7: SATA max UDMA/133 abar m1024@0xb8409000 port 0xb8409200 irq 22
516[ 1.922551] ata8: SATA max UDMA/133 abar m1024@0xb8409000 port 0xb8409280 irq 22
517[ 1.962831] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
518[ 1.962833] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
519[ 1.962834] usb usb3: Product: OHCI PCI host controller
520[ 1.962835] usb usb3: Manufacturer: Linux 4.19.8-gnu-1 ohci_hcd
521[ 1.962836] usb usb3: SerialNumber: 0000:00:12.0
522[ 1.962959] hub 3-0:1.0: USB hub found
523[ 1.962967] hub 3-0:1.0: 3 ports detected
524[ 1.963212] ohci-pci 0000:00:12.1: OHCI PCI host controller
525[ 1.963218] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
526[ 1.963243] ohci-pci 0000:00:12.1: irq 16, io mem 0xb8405000
527[ 2.022814] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
528[ 2.022816] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
529[ 2.022817] usb usb4: Product: OHCI PCI host controller
530[ 2.022818] usb usb4: Manufacturer: Linux 4.19.8-gnu-1 ohci_hcd
531[ 2.022819] usb usb4: SerialNumber: 0000:00:12.1
532[ 2.022903] hub 4-0:1.0: USB hub found
533[ 2.022910] hub 4-0:1.0: 3 ports detected
534[ 2.023088] ohci-pci 0000:00:13.0: OHCI PCI host controller
535[ 2.023093] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
536[ 2.023117] ohci-pci 0000:00:13.0: irq 18, io mem 0xb8406000
537[ 2.105196] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
538[ 2.105197] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
539[ 2.105198] usb usb5: Product: OHCI PCI host controller
540[ 2.105199] usb usb5: Manufacturer: Linux 4.19.8-gnu-1 ohci_hcd
541[ 2.105200] usb usb5: SerialNumber: 0000:00:13.0
542[ 2.105281] hub 5-0:1.0: USB hub found
543[ 2.105294] hub 5-0:1.0: 3 ports detected
544[ 2.105471] ohci-pci 0000:00:13.1: OHCI PCI host controller
545[ 2.105475] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
546[ 2.105492] ohci-pci 0000:00:13.1: irq 18, io mem 0xb8407000
547[ 2.166149] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
548[ 2.166151] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
549[ 2.166152] usb usb6: Product: OHCI PCI host controller
550[ 2.166153] usb usb6: Manufacturer: Linux 4.19.8-gnu-1 ohci_hcd
551[ 2.166154] usb usb6: SerialNumber: 0000:00:13.1
552[ 2.166236] hub 6-0:1.0: USB hub found
553[ 2.166243] hub 6-0:1.0: 3 ports detected
554[ 2.166400] ohci-pci 0000:00:14.5: OHCI PCI host controller
555[ 2.166404] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
556[ 2.166419] ohci-pci 0000:00:14.5: irq 18, io mem 0xb8408000
557[ 2.226145] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
558[ 2.226146] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
559[ 2.226147] usb usb7: Product: OHCI PCI host controller
560[ 2.226148] usb usb7: Manufacturer: Linux 4.19.8-gnu-1 ohci_hcd
561[ 2.226149] usb usb7: SerialNumber: 0000:00:14.5
562[ 2.226230] hub 7-0:1.0: USB hub found
563[ 2.226237] hub 7-0:1.0: 2 ports detected
564[ 2.242194] device-mapper: uevent: version 1.0.3
565[ 2.242271] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
566[ 2.242922] ata5: SATA link down (SStatus 0 SControl 300)
567[ 2.244754] ata7: SATA link down (SStatus 0 SControl 300)
568[ 2.244798] ata8: SATA link down (SStatus 0 SControl 300)
569[ 2.402107] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
570[ 2.413705] ata6.00: ATA-8: KINGSTON SV300S37A60G, 505ABBF1, max UDMA/133
571[ 2.413707] ata6.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 32), AA
572[ 2.423918] ata6.00: configured for UDMA/133
573[ 2.424108] scsi 4:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF1 PQ: 0 ANSI: 5
574[ 2.428293] sd 4:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
575[ 2.428301] sd 4:0:0:0: [sda] Write Protect is off
576[ 2.428303] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
577[ 2.428311] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
578[ 2.432050] sda: sda1 sda2
579[ 2.432360] sd 4:0:0:0: [sda] Attached SCSI removable disk
580[ 2.598758] tsc: Refined TSC clocksource calibration: 3007.524 MHz
581[ 2.598764] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b5a08f6c2e, max_idle_ns: 440795306107 ns
582[ 2.598776] clocksource: Switched to clocksource tsc
583[ 4.509863] NET: Registered protocol family 38
584[ 4.521375] cryptd: max_cpu_qlen set to 1000
585[ 6.839086] random: cryptsetup: uninitialized urandom read (2 bytes read)
586[ 6.857828] random: lvm: uninitialized urandom read (4 bytes read)
587[ 6.868027] random: lvm: uninitialized urandom read (2 bytes read)
588[ 7.078198] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
589[ 7.129841] random: fast init done
590[ 7.255460] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
591[ 7.255554] systemd[1]: Detected architecture x86-64.
592[ 7.258400] systemd[1]: Set hostname to <m4a785t-m>.
593[ 7.399750] systemd[1]: Listening on udev Kernel Socket.
594[ 7.400068] systemd[1]: Listening on LVM2 poll daemon socket.
595[ 7.400112] systemd[1]: Listening on Device-mapper event daemon FIFOs.
596[ 7.400196] systemd[1]: Listening on Journal Audit Socket.
597[ 7.400826] systemd[1]: Created slice User and Session Slice.
598[ 7.400840] systemd[1]: Reached target Remote File Systems.
599[ 7.400889] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
600[ 7.489506] audit: type=1130 audit(1546794706.304:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
601[ 7.490030] audit: type=1130 audit(1546794706.304:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
602[ 7.509650] audit: type=1130 audit(1546794706.324:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
603[ 7.525482] systemd-journald[315]: Received request to flush runtime journal from PID 1
604[ 7.529346] audit: type=1130 audit(1546794706.344:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
605[ 7.548305] audit: type=1130 audit(1546794706.364:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
606[ 7.639336] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0B (\SMB0) (20180810/utaddress-213)
607[ 7.639344] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
608[ 7.675703] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
609[ 7.679544] audit: type=1130 audit(1546794706.494:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
610[ 7.782455] kvm: Nested Virtualization enabled
611[ 7.782457] kvm: Nested Paging enabled
612[ 7.787639] MCE: In-kernel MCE decoding enabled.
613[ 7.796752] EDAC amd64: Node 0: DRAM ECC disabled.
614[ 7.796755] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Denis 'GNUtoo' Cariklib58cd0d2019-01-06 15:15:41 +0100615 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
616 (Note that use of the override may cause unknown side effects.)
Denis 'GNUtoo' Carikli48212202019-01-06 18:18:04 +0100617[ 7.804208] libphy: r8169: probed
618[ 7.804749] r8169 0000:02:00.0 eth0: RTL8168d/8111d, 00:00:00:00:00:30, XID 283000c0, IRQ 24
619[ 7.804751] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
620[ 7.871390] r8169 0000:02:00.0 pe0: renamed from eth0
621[ 7.890954] [drm] radeon kernel modesetting enabled.
622[ 7.895611] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1002:0x0000 0x00).
623[ 7.895668] radeon 0000:01:05.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
624[ 7.895757] [drm:radeon_get_bios [radeon]] *ERROR* Unable to locate a BIOS ROM
625[ 7.895759] radeon 0000:01:05.0: Fatal error during GPU init
626[ 7.895760] [drm] radeon: finishing device.
627[ 7.895762] [TTM] Memory type 2 has not been initialized
628[ 7.909529] audit: type=1130 audit(1546794706.724:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
629[ 7.912951] radeon: probe of 0000:01:05.0 failed with error -22
630[ 7.926099] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
631[ 7.954441] cfg80211: Loading compiled-in X.509 certificates for regulatory database
632[ 7.955656] audit: type=1130 audit(1546794706.768:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
633[ 7.958257] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
634[ 7.958643] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
635[ 7.958645] cfg80211: failed to load regulatory.db
636[ 7.964907] audit: type=1127 audit(1546794706.778:10): pid=353 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
637[ 7.969399] audit: type=1130 audit(1546794706.784:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
638[ 8.088743] 0000:02:00.0: Missing Free firmware (non-Free firmware loading is disabled)
639[ 8.088944] r8169 0000:02:00.0 pe0: unable to load firmware patch /*(DEBLOBBED)*/ (-2)
640[ 8.089363] RTL8211B Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
641[ 8.195606] IPv6: ADDRCONF(NETDEV_UP): pe0: link is not ready
642[ 8.232458] random: crng init done
643[ 8.232461] random: 7 urandom warning(s) missed due to ratelimiting
644[ 8.260318] fbcon: Taking over console
645[ 10.109406] ath: EEPROM regdomain: 0x30
646[ 10.109408] ath: EEPROM indicates we should expect a direct regpair map
647[ 10.109409] ath: Country alpha2 being used: AM
648[ 10.109410] ath: Regpair used: 0x30
649[ 10.124511] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
650[ 10.125373] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffff913a00850000, irq=20
651[ 10.132904] ath9k 0000:03:05.0 wlp3s5: renamed from wlan0
652[ 10.298277] r8169 0000:02:00.0 pe0: Link is Up - 1Gbps/Full - flow control rx/tx
653[ 10.298289] IPv6: ADDRCONF(NETDEV_CHANGE): pe0: link becomes ready
654[ 11.008769] snd_hda_intel 0000:00:14.2: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
655[ 12.012095] snd_hda_intel 0000:00:14.2: Codec #2 probe error; disabling it...
656[ 12.037608] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
657[ 12.037611] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
658[ 12.037613] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
659[ 12.037614] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
660[ 12.037615] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x21
661[ 12.037616] snd_hda_codec_via hdaudioC0D0: inputs:
662[ 12.037617] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
663[ 12.037619] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
664[ 12.037620] snd_hda_codec_via hdaudioC0D0: Line=0x1b
665[ 12.049387] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
666[ 12.049497] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
667[ 12.049579] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
668[ 12.049661] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
669[ 12.049757] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
670[ 12.049830] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
671[ 12.049946] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
672[ 12.050015] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
673[ 15.136344] kauditd_printk_skb: 11 callbacks suppressed
674[ 15.136346] audit: type=1131 audit(1546794713.951:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'