root | e1e840f | 2015-01-03 20:10:31 +0100 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.17.6-1-ARCH (builduser@foutrelis) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 |
| 5 | [ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/mapper/arch-root rootflags=subvol=root rw vt.color=10 i915.lvds_downclock=1 i915.fastboot=1 initrd=../initramfs-linux.img |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| 13 | [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| 14 | [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfe47fff] usable |
| 15 | [ 0.000000] BIOS-e820: [mem 0x00000000bfe48000-0x00000000c29fffff] reserved |
| 16 | [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| 17 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013cdfffff] usable |
| 18 | [ 0.000000] NX (Execute Disable) protection: active |
| 19 | [ 0.000000] SMBIOS 2.7 present. |
| 20 | [ 0.000000] DMI: LENOVO 4299Y46/4299Y46, BIOS CBET4000 4.0-7803-g3ae558f 01/03/2015 |
| 21 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 22 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 23 | [ 0.000000] AGP: No AGP bridge found |
| 24 | [ 0.000000] e820: last_pfn = 0x13ce00 max_arch_pfn = 0x400000000 |
| 25 | [ 0.000000] MTRR default type: write-back |
| 26 | [ 0.000000] MTRR fixed ranges enabled: |
| 27 | [ 0.000000] 00000-9FFFF write-back |
| 28 | [ 0.000000] A0000-BFFFF uncachable |
| 29 | [ 0.000000] C0000-FFFFF write-back |
| 30 | [ 0.000000] MTRR variable ranges enabled: |
| 31 | [ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable |
| 32 | [ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining |
| 33 | [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable |
| 34 | [ 0.000000] 3 disabled |
| 35 | [ 0.000000] 4 disabled |
| 36 | [ 0.000000] 5 disabled |
| 37 | [ 0.000000] 6 disabled |
| 38 | [ 0.000000] 7 disabled |
| 39 | [ 0.000000] 8 disabled |
| 40 | [ 0.000000] 9 disabled |
| 41 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 42 | [ 0.000000] e820: last_pfn = 0xbfe48 max_arch_pfn = 0x400000000 |
| 43 | [ 0.000000] Scanning 1 areas for low memory corruption |
| 44 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 45 | [ 0.000000] reserving inaccessible SNB gfx pages |
| 46 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 47 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 48 | [ 0.000000] BRK [0x01b2b000, 0x01b2bfff] PGTABLE |
| 49 | [ 0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE |
| 50 | [ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE |
| 51 | [ 0.000000] init_memory_mapping: [mem 0x13cc00000-0x13cdfffff] |
| 52 | [ 0.000000] [mem 0x13cc00000-0x13cdfffff] page 2M |
| 53 | [ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE |
| 54 | [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13cbfffff] |
| 55 | [ 0.000000] [mem 0x13c000000-0x13cbfffff] page 2M |
| 56 | [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] |
| 57 | [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M |
| 58 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] |
| 59 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 60 | [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M |
| 61 | [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] |
| 62 | [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M |
| 63 | [ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfe47fff] |
| 64 | [ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M |
| 65 | [ 0.000000] [mem 0xbfe00000-0xbfe47fff] page 4k |
| 66 | [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE |
| 67 | [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE |
| 68 | [ 0.000000] RAMDISK: [mem 0x7f659000-0x7fffffff] |
| 69 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 70 | [ 0.000000] ACPI: RSDP 0x00000000000F2060 000024 (v02 CORE ) |
| 71 | [ 0.000000] ACPI: XSDT 0x00000000BFE560E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 72 | [ 0.000000] ACPI: FACP 0x00000000BFE59920 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| 73 | [ 0.000000] ACPI: DSDT 0x00000000BFE56250 0036D0 (v02 COREv4 COREBOOT 20110725 INTL 20140114) |
| 74 | [ 0.000000] ACPI: FACS 0x00000000BFE56210 000040 |
| 75 | [ 0.000000] ACPI: SSDT 0x00000000BFE59A20 0012D2 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 76 | [ 0.000000] ACPI: MCFG 0x00000000BFE5AD00 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 77 | [ 0.000000] ACPI: APIC 0x00000000BFE5AD40 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 78 | [ 0.000000] ACPI: HPET 0x00000000BFE5ADB0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 79 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 80 | [ 0.000000] No NUMA configuration found |
| 81 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013cdfffff] |
| 82 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13cdfffff] |
| 83 | [ 0.000000] NODE_DATA [mem 0x13cdfb000-0x13cdfefff] |
| 84 | [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff880138400000-ffff88013c3fffff] on node 0 |
| 85 | [ 0.000000] Zone ranges: |
| 86 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 87 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 88 | [ 0.000000] Normal [mem 0x100000000-0x13cdfffff] |
| 89 | [ 0.000000] Movable zone start for each node |
| 90 | [ 0.000000] Early memory node ranges |
| 91 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 92 | [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] |
| 93 | [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] |
| 94 | [ 0.000000] node 0: [mem 0x40200000-0xbfe47fff] |
| 95 | [ 0.000000] node 0: [mem 0x100000000-0x13cdfffff] |
| 96 | [ 0.000000] On node 0 totalpages: 1034214 |
| 97 | [ 0.000000] DMA zone: 64 pages used for memmap |
| 98 | [ 0.000000] DMA zone: 158 pages reserved |
| 99 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 100 | [ 0.000000] DMA32 zone: 12202 pages used for memmap |
| 101 | [ 0.000000] DMA32 zone: 780872 pages, LIFO batch:31 |
| 102 | [ 0.000000] Normal zone: 3896 pages used for memmap |
| 103 | [ 0.000000] Normal zone: 249344 pages, LIFO batch:31 |
| 104 | [ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff |
| 105 | [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| 106 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 107 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 108 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| 109 | [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| 110 | [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| 111 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 112 | [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| 113 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 114 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 115 | [ 0.000000] ACPI: IRQ0 used by override. |
| 116 | [ 0.000000] ACPI: IRQ9 used by override. |
| 117 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 118 | [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| 119 | [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| 120 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 121 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 122 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 123 | [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| 124 | [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] |
| 125 | [ 0.000000] PM: Registered nosave memory: [mem 0xbfe48000-0xc29fffff] |
| 126 | [ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff] |
| 127 | [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| 128 | [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff] |
| 129 | [ 0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices |
| 130 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 131 | [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1 |
| 132 | [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013ca00000 s82752 r8192 d23744 u524288 |
| 133 | [ 0.000000] pcpu-alloc: s82752 r8192 d23744 u524288 alloc=1*2097152 |
| 134 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| 135 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1017894 |
| 136 | [ 0.000000] Policy zone: Normal |
| 137 | [ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/mapper/arch-root rootflags=subvol=root rw vt.color=10 i915.lvds_downclock=1 i915.fastboot=1 initrd=../initramfs-linux.img |
| 138 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 139 | [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form |
| 140 | [ 0.000000] AGP: Checking aperture... |
| 141 | [ 0.000000] AGP: No AGP bridge found |
| 142 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 143 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 144 | [ 0.000000] Memory: 3982572K/4136856K available (5386K kernel code, 897K rwdata, 1712K rodata, 1136K init, 1176K bss, 154284K reserved) |
| 145 | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| 146 | [ 0.000000] Preemptible hierarchical RCU implementation. |
| 147 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 148 | [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. |
| 149 | [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4. |
| 150 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| 151 | [ 0.000000] NR_IRQS:8448 nr_irqs:456 0 |
| 152 | [ 0.000000] Console: colour VGA+ 80x25 |
| 153 | [ 0.000000] console [tty0] enabled |
| 154 | [ 0.000000] allocated 16777216 bytes of page_cgroup |
| 155 | [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups |
| 156 | [ 0.000000] hpet clockevent registered |
| 157 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 158 | [ 0.000000] tsc: Detected 2494.332 MHz processor |
| 159 | [ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.52 BogoMIPS (lpj=8314440) |
| 160 | [ 0.000037] pid_max: default: 32768 minimum: 301 |
| 161 | [ 0.000043] ACPI: Core revision 20140724 |
| 162 | [ 0.002759] ACPI: All ACPI Tables successfully acquired |
| 163 | [ 0.002876] Security Framework initialized |
| 164 | [ 0.002881] Yama: becoming mindful. |
| 165 | [ 0.003139] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 166 | [ 0.004174] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| 167 | [ 0.004629] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| 168 | [ 0.004634] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| 169 | [ 0.004838] Initializing cgroup subsys memory |
| 170 | [ 0.004843] Initializing cgroup subsys devices |
| 171 | [ 0.004845] Initializing cgroup subsys freezer |
| 172 | [ 0.004847] Initializing cgroup subsys net_cls |
| 173 | [ 0.004849] Initializing cgroup subsys blkio |
| 174 | [ 0.004869] CPU: Physical Processor ID: 0 |
| 175 | [ 0.004871] CPU: Processor Core ID: 0 |
| 176 | [ 0.004876] mce: CPU supports 7 MCE banks |
| 177 | [ 0.004886] CPU0: Thermal monitoring enabled (TM1) |
| 178 | [ 0.004896] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| 179 | Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| 180 | [ 0.005008] Freeing SMP alternatives memory: 20K (ffffffff819fe000 - ffffffff81a03000) |
| 181 | [ 0.006001] ftrace: allocating 20687 entries in 81 pages |
| 182 | [ 0.016449] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 183 | [ 0.049492] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07) |
| 184 | [ 0.049500] TSC deadline timer enabled |
| 185 | [ 0.049524] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. |
| 186 | [ 0.049545] ... version: 3 |
| 187 | [ 0.049546] ... bit width: 48 |
| 188 | [ 0.049547] ... generic registers: 4 |
| 189 | [ 0.049548] ... value mask: 0000ffffffffffff |
| 190 | [ 0.049549] ... max period: 0000ffffffffffff |
| 191 | [ 0.049549] ... fixed-purpose events: 3 |
| 192 | [ 0.049550] ... event mask: 000000070000000f |
| 193 | [ 0.069685] x86: Booting SMP configuration: |
| 194 | [ 0.069687] .... node #0, CPUs: #1 |
| 195 | [ 0.082885] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 196 | [ 0.089730] #2 #3 |
| 197 | [ 0.123044] x86: Booted up 1 node, 4 CPUs |
| 198 | [ 0.123047] smpboot: Total of 4 processors activated (19962.10 BogoMIPS) |
| 199 | [ 0.126217] devtmpfs: initialized |
| 200 | [ 0.129280] pinctrl core: initialized pinctrl subsystem |
| 201 | [ 0.129319] RTC time: 16:13:11, date: 01/03/15 |
| 202 | [ 0.129394] NET: Registered protocol family 16 |
| 203 | [ 0.129509] cpuidle: using governor ladder |
| 204 | [ 0.129512] cpuidle: using governor menu |
| 205 | [ 0.129547] ACPI: bus type PCI registered |
| 206 | [ 0.129549] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 207 | [ 0.129622] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| 208 | [ 0.129625] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| 209 | [ 0.129714] PCI: Using configuration type 1 for base access |
| 210 | [ 0.143463] ACPI: Added _OSI(Module Device) |
| 211 | [ 0.143465] ACPI: Added _OSI(Processor Device) |
| 212 | [ 0.143466] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 213 | [ 0.143467] ACPI: Added _OSI(Processor Aggregator Device) |
| 214 | [ 0.146172] ACPI: Interpreter enabled |
| 215 | [ 0.146177] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) |
| 216 | [ 0.146182] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) |
| 217 | [ 0.146194] ACPI: (supports S0 S3 S4 S5) |
| 218 | [ 0.146195] ACPI: Using IOAPIC for interrupt routing |
| 219 | [ 0.146216] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 220 | [ 0.160515] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 221 | [ 0.160521] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 222 | [ 0.160562] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 223 | [ 0.160645] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| 224 | [ 0.160772] PCI host bridge to bus 0000:00 |
| 225 | [ 0.160775] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 226 | [ 0.160777] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 227 | [ 0.160778] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| 228 | [ 0.160780] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 229 | [ 0.160782] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] |
| 230 | [ 0.160783] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] |
| 231 | [ 0.160785] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] |
| 232 | [ 0.160786] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] |
| 233 | [ 0.160788] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] |
| 234 | [ 0.160789] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] |
| 235 | [ 0.160791] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] |
| 236 | [ 0.160792] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] |
| 237 | [ 0.160794] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] |
| 238 | [ 0.160796] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] |
| 239 | [ 0.160797] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] |
| 240 | [ 0.160799] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] |
| 241 | [ 0.160800] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] |
| 242 | [ 0.160802] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xfebfffff] |
| 243 | [ 0.160803] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] |
| 244 | [ 0.160811] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 |
| 245 | [ 0.160890] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 |
| 246 | [ 0.160900] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] |
| 247 | [ 0.160906] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| 248 | [ 0.160910] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| 249 | [ 0.161005] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 |
| 250 | [ 0.161028] pci 0000:00:16.0: reg 0x10: [mem 0xe1626100-0xe162610f 64bit] |
| 251 | [ 0.161106] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| 252 | [ 0.161181] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| 253 | [ 0.161200] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff] |
| 254 | [ 0.161210] pci 0000:00:19.0: reg 0x14: [mem 0xe1624000-0xe1624fff] |
| 255 | [ 0.161219] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| 256 | [ 0.161283] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| 257 | [ 0.161351] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| 258 | [ 0.161374] pci 0000:00:1a.0: reg 0x10: [mem 0xe1625800-0xe1625bff] |
| 259 | [ 0.161464] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| 260 | [ 0.161498] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| 261 | [ 0.161540] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| 262 | [ 0.161559] pci 0000:00:1b.0: reg 0x10: [mem 0xe1620000-0xe1623fff 64bit] |
| 263 | [ 0.161636] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| 264 | [ 0.161671] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| 265 | [ 0.161714] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 |
| 266 | [ 0.161840] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| 267 | [ 0.161923] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 |
| 268 | [ 0.162058] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| 269 | [ 0.162143] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 |
| 270 | [ 0.162279] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| 271 | [ 0.162361] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 |
| 272 | [ 0.162498] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| 273 | [ 0.162584] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| 274 | [ 0.162605] pci 0000:00:1d.0: reg 0x10: [mem 0xe1625c00-0xe1625fff] |
| 275 | [ 0.162695] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| 276 | [ 0.162728] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| 277 | [ 0.162769] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 |
| 278 | [ 0.162937] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 |
| 279 | [ 0.162957] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| 280 | [ 0.162966] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| 281 | [ 0.162975] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| 282 | [ 0.162983] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| 283 | [ 0.162992] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| 284 | [ 0.163003] pci 0000:00:1f.2: reg 0x24: [mem 0xe1625000-0xe16257ff] |
| 285 | [ 0.163053] pci 0000:00:1f.2: PME# supported from D3hot |
| 286 | [ 0.163126] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 |
| 287 | [ 0.163144] pci 0000:00:1f.3: reg 0x10: [mem 0xe1626000-0xe16260ff 64bit] |
| 288 | [ 0.163165] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| 289 | [ 0.163315] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 290 | [ 0.163571] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000 |
| 291 | [ 0.163757] pci 0000:02:00.0: reg 0x10: [mem 0xe1400000-0xe1401fff 64bit] |
| 292 | [ 0.164525] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold |
| 293 | [ 0.169953] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 294 | [ 0.169963] pci 0000:00:1c.1: bridge window [mem 0xe1400000-0xe14fffff] |
| 295 | [ 0.170068] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| 296 | [ 0.170073] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| 297 | [ 0.170078] pci 0000:00:1c.3: bridge window [mem 0xe0800000-0xe0ffffff] |
| 298 | [ 0.170087] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| 299 | [ 0.170210] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501 |
| 300 | [ 0.170246] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz. |
| 301 | [ 0.170283] pci 0000:04:00.0: reg 0x10: [mem 0xe1500000-0xe15000ff] |
| 302 | [ 0.170587] pci 0000:04:00.0: supports D1 D2 |
| 303 | [ 0.170589] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 304 | [ 0.176519] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| 305 | [ 0.176536] pci 0000:00:1c.4: bridge window [mem 0xe1500000-0xe15fffff] |
| 306 | [ 0.176711] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 307 | [ 0.176754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 308 | [ 0.176794] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 309 | [ 0.176833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 310 | [ 0.176872] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 311 | [ 0.176910] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 312 | [ 0.176949] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 313 | [ 0.176988] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 314 | [ 0.177584] ACPI: Enabled 1 GPEs in block 00 to 3F |
| 315 | [ 0.177631] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 |
| 316 | [ 0.177722] vgaarb: setting as boot device: PCI:0000:00:02.0 |
| 317 | [ 0.177724] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| 318 | [ 0.177727] vgaarb: loaded |
| 319 | [ 0.177728] vgaarb: bridge control possible 0000:00:02.0 |
| 320 | [ 0.177766] PCI: Using ACPI for IRQ routing |
| 321 | [ 0.179288] PCI: pci_cache_line_size set to 64 bytes |
| 322 | [ 0.179404] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 323 | [ 0.179405] e820: reserve RAM buffer [mem 0xbfe48000-0xbfffffff] |
| 324 | [ 0.179407] e820: reserve RAM buffer [mem 0x13ce00000-0x13fffffff] |
| 325 | [ 0.179505] NetLabel: Initializing |
| 326 | [ 0.179506] NetLabel: domain hash size = 128 |
| 327 | [ 0.179507] NetLabel: protocols = UNLABELED CIPSOv4 |
| 328 | [ 0.179520] NetLabel: unlabeled traffic allowed by default |
| 329 | [ 0.179551] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| 330 | [ 0.179556] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| 331 | [ 0.181586] Switched to clocksource hpet |
| 332 | [ 0.186426] pnp: PnP ACPI init |
| 333 | [ 0.186519] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| 334 | [ 0.186521] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| 335 | [ 0.186523] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| 336 | [ 0.186524] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| 337 | [ 0.186526] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| 338 | [ 0.186528] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| 339 | [ 0.186531] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| 340 | [ 0.186533] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| 341 | [ 0.186535] system 00:00: [mem 0x20000000-0x201fffff] has been reserved |
| 342 | [ 0.186537] system 00:00: [mem 0x40000000-0x401fffff] has been reserved |
| 343 | [ 0.186540] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 344 | [ 0.187110] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| 345 | [ 0.187113] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| 346 | [ 0.187150] system 00:02: [io 0x0500-0x057f] could not be reserved |
| 347 | [ 0.187152] system 00:02: [io 0x0480-0x04bf] has been reserved |
| 348 | [ 0.187154] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 349 | [ 0.187174] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 350 | [ 0.187209] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 351 | [ 0.187237] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 352 | [ 0.187250] pnp: PnP ACPI: found 6 devices |
| 353 | [ 0.193761] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 354 | [ 0.193779] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 355 | [ 0.193787] pci 0000:00:1c.1: bridge window [mem 0xe1400000-0xe14fffff] |
| 356 | [ 0.193798] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| 357 | [ 0.193802] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| 358 | [ 0.193809] pci 0000:00:1c.3: bridge window [mem 0xe0800000-0xe0ffffff] |
| 359 | [ 0.193814] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| 360 | [ 0.193822] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| 361 | [ 0.193829] pci 0000:00:1c.4: bridge window [mem 0xe1500000-0xe15fffff] |
| 362 | [ 0.193842] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 363 | [ 0.193844] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 364 | [ 0.193845] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 365 | [ 0.193847] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] |
| 366 | [ 0.193849] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] |
| 367 | [ 0.193850] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] |
| 368 | [ 0.193852] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] |
| 369 | [ 0.193853] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] |
| 370 | [ 0.193855] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] |
| 371 | [ 0.193856] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] |
| 372 | [ 0.193858] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] |
| 373 | [ 0.193859] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff] |
| 374 | [ 0.193861] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff] |
| 375 | [ 0.193863] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff] |
| 376 | [ 0.193864] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff] |
| 377 | [ 0.193866] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff] |
| 378 | [ 0.193867] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xfebfffff] |
| 379 | [ 0.193869] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff] |
| 380 | [ 0.193871] pci_bus 0000:02: resource 1 [mem 0xe1400000-0xe14fffff] |
| 381 | [ 0.193872] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| 382 | [ 0.193874] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff] |
| 383 | [ 0.193876] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref] |
| 384 | [ 0.193877] pci_bus 0000:04: resource 1 [mem 0xe1500000-0xe15fffff] |
| 385 | [ 0.193899] NET: Registered protocol family 2 |
| 386 | [ 0.194060] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| 387 | [ 0.194143] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| 388 | [ 0.194247] TCP: Hash tables configured (established 32768 bind 32768) |
| 389 | [ 0.194266] TCP: reno registered |
| 390 | [ 0.194272] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| 391 | [ 0.194290] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| 392 | [ 0.194335] NET: Registered protocol family 1 |
| 393 | [ 0.194348] pci 0000:00:02.0: Video device with shadowed ROM |
| 394 | [ 0.194668] PCI: CLS 64 bytes, default 64 |
| 395 | [ 0.194710] Unpacking initramfs... |
| 396 | [ 0.225087] Freeing initrd memory: 9884K (ffff88007f659000 - ffff880080000000) |
| 397 | [ 0.225096] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 398 | [ 0.225098] software IO TLB [mem 0xbbe48000-0xbfe48000] (64MB) mapped at [ffff8800bbe48000-ffff8800bfe47fff] |
| 399 | [ 0.225289] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer |
| 400 | [ 0.225333] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 |
| 401 | [ 0.225339] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 |
| 402 | [ 0.225351] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 |
| 403 | [ 0.225359] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 |
| 404 | [ 0.225412] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 405 | [ 0.225436] Scanning for low memory corruption every 60 seconds |
| 406 | [ 0.225680] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| 407 | [ 0.225701] Initialise system trusted keyring |
| 408 | [ 0.226032] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 409 | [ 0.227343] zpool: loaded |
| 410 | [ 0.227346] zbud: loaded |
| 411 | [ 0.227506] VFS: Disk quotas dquot_6.5.2 |
| 412 | [ 0.227539] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 413 | [ 0.227659] msgmni has been set to 7797 |
| 414 | [ 0.227710] Key type big_key registered |
| 415 | [ 0.227872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 416 | [ 0.227913] io scheduler noop registered |
| 417 | [ 0.227915] io scheduler deadline registered |
| 418 | [ 0.227942] io scheduler cfq registered (default) |
| 419 | [ 0.228105] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X |
| 420 | [ 0.228278] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X |
| 421 | [ 0.228410] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X |
| 422 | [ 0.228587] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X |
| 423 | [ 0.228710] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| 424 | [ 0.228716] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded |
| 425 | [ 0.228738] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| 426 | [ 0.228740] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| 427 | [ 0.228745] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded |
| 428 | [ 0.228766] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt |
| 429 | [ 0.228772] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded |
| 430 | [ 0.228792] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt |
| 431 | [ 0.228794] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt |
| 432 | [ 0.228799] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded |
| 433 | [ 0.228813] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 434 | [ 0.228854] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ |
| 435 | [ 0.228888] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded |
| 436 | [ 0.228892] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 437 | [ 0.228925] intel_idle: MWAIT substates: 0x21120 |
| 438 | [ 0.228927] intel_idle: v0.4 model 0x2A |
| 439 | [ 0.228928] intel_idle: lapic_timer_reliable_states 0xffffffff |
| 440 | [ 0.229104] GHES: HEST is not enabled! |
| 441 | [ 0.229185] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled |
| 442 | [ 0.229565] Linux agpgart interface v0.103 |
| 443 | [ 0.229610] rtc_cmos 00:03: RTC can wake from S4 |
| 444 | [ 0.229734] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| 445 | [ 0.229763] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| 446 | [ 0.229772] Intel P-state driver initializing. |
| 447 | [ 0.229944] ledtrig-cpu: registered to indicate activity on CPUs |
| 448 | [ 0.230228] TCP: cubic registered |
| 449 | [ 0.230498] NET: Registered protocol family 10 |
| 450 | [ 0.231123] NET: Registered protocol family 17 |
| 451 | [ 0.231855] Loading compiled-in X.509 certificates |
| 452 | [ 0.231892] registered taskstats version 1 |
| 453 | [ 0.232799] Magic number: 15:58:236 |
| 454 | [ 0.232951] rtc_cmos 00:03: setting system clock to 2015-01-03 16:13:11 UTC (1420301591) |
| 455 | [ 0.233102] PM: Hibernation image not present or could not be loaded. |
| 456 | [ 0.236285] Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000) |
| 457 | [ 0.236290] Write protecting the kernel read-only data: 8192k |
| 458 | [ 0.241428] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000) |
| 459 | [ 0.243575] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000) |
| 460 | [ 0.246536] random: systemd urandom read with 1 bits of entropy available |
| 461 | [ 0.247610] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN ) |
| 462 | [ 0.247984] systemd[1]: Detected architecture 'x86-64'. |
| 463 | [ 0.247993] systemd[1]: Running in initial RAM disk. |
| 464 | [ 0.248005] systemd[1]: Running with unpopulated /etc. |
| 465 | [ 0.248579] systemd[1]: No hostname configured. |
| 466 | [ 0.248591] systemd[1]: Set hostname to <localhost>. |
| 467 | [ 0.248656] systemd[1]: Initializing machine ID from random generator. |
| 468 | [ 0.278862] systemd[1]: Populated /etc with preset unit settings. |
| 469 | [ 0.288971] systemd[1]: Starting Timers. |
| 470 | [ 0.289374] systemd[1]: Reached target Timers. |
| 471 | [ 0.289402] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| 472 | [ 0.289459] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 473 | [ 0.289477] systemd[1]: Starting Paths. |
| 474 | [ 0.289802] systemd[1]: Reached target Paths. |
| 475 | [ 0.289820] systemd[1]: Expecting device dev-disk-by\x2duuid-5ac7f3e0\x2da431\x2d4c71\x2d95c4\x2df0bb9474e592.device... |
| 476 | [ 0.290061] systemd[1]: Expecting device dev-mapper-arch\x2droot.device... |
| 477 | [ 0.290295] systemd[1]: Starting -.slice. |
| 478 | [ 0.297334] systemd[1]: Created slice -.slice. |
| 479 | [ 0.297354] systemd[1]: Starting Journal Socket (/dev/log). |
| 480 | [ 0.297730] systemd[1]: Listening on Journal Socket (/dev/log). |
| 481 | [ 0.297753] systemd[1]: Starting udev Control Socket. |
| 482 | [ 0.298102] systemd[1]: Listening on udev Control Socket. |
| 483 | [ 0.298121] systemd[1]: Starting udev Kernel Socket. |
| 484 | [ 0.298480] systemd[1]: Listening on udev Kernel Socket. |
| 485 | [ 0.298498] systemd[1]: Starting Journal Socket. |
| 486 | [ 0.298854] systemd[1]: Listening on Journal Socket. |
| 487 | [ 0.298871] systemd[1]: Starting Sockets. |
| 488 | [ 0.299195] systemd[1]: Reached target Sockets. |
| 489 | [ 0.299210] systemd[1]: Starting system.slice. |
| 490 | [ 0.299767] systemd[1]: Created slice system.slice. |
| 491 | [ 0.299785] systemd[1]: Starting Slices. |
| 492 | [ 0.300109] systemd[1]: Reached target Slices. |
| 493 | [ 0.300124] systemd[1]: Starting system-systemd\x2dfsck.slice. |
| 494 | [ 0.300689] systemd[1]: Created slice system-systemd\x2dfsck.slice. |
| 495 | [ 0.300711] systemd[1]: Starting udev Coldplug all Devices... |
| 496 | [ 0.301473] systemd[1]: Starting system-systemd\x2dcryptsetup.slice. |
| 497 | [ 0.302088] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. |
| 498 | [ 0.302122] systemd[1]: Starting Setup Virtual Console... |
| 499 | [ 0.302847] systemd[1]: Starting Journal Service... |
| 500 | [ 0.303678] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 501 | [ 0.304710] systemd[1]: Starting Swap. |
| 502 | [ 0.305036] systemd[1]: Reached target Swap. |
| 503 | [ 0.305091] systemd[1]: Starting Local File Systems. |
| 504 | [ 0.305423] systemd[1]: Reached target Local File Systems. |
| 505 | [ 0.306872] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| 506 | [ 0.307015] systemd[1]: Starting Create Static Device Nodes in /dev... |
| 507 | [ 0.315861] systemd[1]: Started Create Static Device Nodes in /dev. |
| 508 | [ 0.316427] systemd[1]: Started Setup Virtual Console. |
| 509 | [ 0.316536] systemd[1]: Starting udev Kernel Device Manager... |
| 510 | [ 0.320469] systemd[1]: Started udev Coldplug all Devices. |
| 511 | [ 0.321259] systemd[1]: Started udev Kernel Device Manager. |
| 512 | [ 0.327090] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0E:00/input/input0 |
| 513 | [ 0.327095] ACPI: Sleep Button [SLPB] |
| 514 | [ 0.327153] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0D:00/input/input1 |
| 515 | [ 0.327295] ACPI: Lid Switch [LID] |
| 516 | [ 0.327372] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| 517 | [ 0.327376] ACPI: Power Button [PWRF] |
| 518 | [ 0.331543] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 519 | [ 0.332085] systemd[1]: Started Journal Service. |
| 520 | [ 0.336430] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 521 | [ 0.336575] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 522 | [ 0.336621] [drm] Initialized drm 1.1.0 20060810 |
| 523 | [ 0.338715] ACPI: bus type USB registered |
| 524 | [ 0.338767] usbcore: registered new interface driver usbfs |
| 525 | [ 0.338781] usbcore: registered new interface driver hub |
| 526 | [ 0.338860] usbcore: registered new device driver usb |
| 527 | [ 0.339628] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 528 | [ 0.339938] ehci-pci: EHCI PCI platform driver |
| 529 | [ 0.340097] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| 530 | [ 0.340105] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| 531 | [ 0.340121] ehci-pci 0000:00:1a.0: debug port 2 |
| 532 | [ 0.341381] sdhci: Secure Digital Host Controller Interface driver |
| 533 | [ 0.341383] sdhci: Copyright(c) Pierre Ossman |
| 534 | [ 0.342241] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4) |
| 535 | [ 0.342243] SCSI subsystem initialized |
| 536 | [ 0.342738] sdhci-pci 0000:04:00.0: No vmmc regulator found |
| 537 | [ 0.342742] sdhci-pci 0000:04:00.0: No vqmmc regulator found |
| 538 | [ 0.342877] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA |
| 539 | [ 0.343803] libata version 3.00 loaded. |
| 540 | [ 0.344036] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| 541 | [ 0.344056] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe1625800 |
| 542 | [ 0.347403] AVX version of gcm_enc/dec engaged. |
| 543 | [ 0.351942] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| 544 | [ 0.352168] hub 1-0:1.0: USB hub found |
| 545 | [ 0.352179] hub 1-0:1.0: 3 ports detected |
| 546 | [ 0.352751] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| 547 | [ 0.352759] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| 548 | [ 0.352774] ehci-pci 0000:00:1d.0: debug port 2 |
| 549 | [ 0.356685] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| 550 | [ 0.356710] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1625c00 |
| 551 | [ 0.358902] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 |
| 552 | [ 0.365271] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| 553 | [ 0.365597] hub 2-0:1.0: USB hub found |
| 554 | [ 0.365607] hub 2-0:1.0: 3 ports detected |
| 555 | [ 0.365779] ahci 0000:00:1f.2: version 3.0 |
| 556 | [ 0.365926] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X |
| 557 | [ 0.365949] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| 558 | [ 0.378583] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| 559 | [ 0.378595] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| 560 | [ 0.379340] scsi host0: ahci |
| 561 | [ 0.379537] scsi host1: ahci |
| 562 | [ 0.379667] scsi host2: ahci |
| 563 | [ 0.379790] scsi host3: ahci |
| 564 | [ 0.379894] scsi host4: ahci |
| 565 | [ 0.379999] scsi host5: ahci |
| 566 | [ 0.380049] ata1: SATA max UDMA/133 abar m2048@0xe1625000 port 0xe1625100 irq 28 |
| 567 | [ 0.380051] ata2: SATA max UDMA/133 abar m2048@0xe1625000 port 0xe1625180 irq 28 |
| 568 | [ 0.380054] ata3: SATA max UDMA/133 abar m2048@0xe1625000 port 0xe1625200 irq 28 |
| 569 | [ 0.380055] ata4: DUMMY |
| 570 | [ 0.380056] ata5: DUMMY |
| 571 | [ 0.380057] ata6: DUMMY |
| 572 | [ 0.380559] [drm] Memory usable by graphics device = 2048M |
| 573 | [ 0.380571] [drm] Replacing VGA console driver |
| 574 | [ 0.381067] Console: switching to colour dummy device 80x25 |
| 575 | [ 0.438765] i915 0000:00:02.0: irq 29 for MSI/MSI-X |
| 576 | [ 0.438791] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 577 | [ 0.438795] [drm] Driver supports precise vblank timestamp query. |
| 578 | [ 0.438937] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| 579 | [ 0.538789] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 |
| 580 | [ 0.553933] fbcon: inteldrmfb (fb0) is primary device |
| 581 | [ 0.659015] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| 582 | [ 0.698988] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 583 | [ 0.700190] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133 |
| 584 | [ 0.700194] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| 585 | [ 0.701575] ata1.00: configured for UDMA/133 |
| 586 | [ 0.701990] scsi 0:0:0:0: Direct-Access ATA HGST HTS725050A7 B550 PQ: 0 ANSI: 5 |
| 587 | [ 0.783655] hub 1-1:1.0: USB hub found |
| 588 | [ 0.783796] hub 1-1:1.0: 6 ports detected |
| 589 | [ 0.889191] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| 590 | [ 1.013816] hub 2-1:1.0: USB hub found |
| 591 | [ 1.013884] hub 2-1:1.0: 8 ports detected |
| 592 | [ 1.022684] ata2: SATA link down (SStatus 0 SControl 300) |
| 593 | [ 1.082904] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| 594 | [ 1.216854] Console: switching to colour frame buffer device 170x48 |
| 595 | [ 1.223533] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| 596 | [ 1.223537] i915 0000:00:02.0: registered panic notifier |
| 597 | [ 1.229549] tsc: Refined TSC clocksource calibration: 2494.333 MHz |
| 598 | [ 1.246485] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| 599 | [ 1.250227] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| 600 | [ 1.343023] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 601 | [ 1.353270] acpi device:06: registered as cooling_device0 |
| 602 | [ 1.353399] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 |
| 603 | [ 1.353472] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 |
| 604 | [ 1.354743] ata3.00: ATA-8: MKNSSDAT120GB-DX, 580ABBF0, max UDMA/133 |
| 605 | [ 1.354751] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| 606 | [ 1.364897] ata3.00: configured for UDMA/133 |
| 607 | [ 1.365274] scsi 2:0:0:0: Direct-Access ATA MKNSSDAT120GB-DX BBF0 PQ: 0 ANSI: 5 |
| 608 | [ 1.369494] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) |
| 609 | [ 1.369501] sd 0:0:0:0: [sda] 4096-byte physical blocks |
| 610 | [ 1.369603] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) |
| 611 | [ 1.369643] sd 0:0:0:0: [sda] Write Protect is off |
| 612 | [ 1.369659] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 613 | [ 1.369706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 614 | [ 1.369766] sd 2:0:0:0: [sdb] Write Protect is off |
| 615 | [ 1.369772] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| 616 | [ 1.369815] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 617 | [ 1.371063] sdb: sdb1 sdb2 sdb3 |
| 618 | [ 1.371601] sd 2:0:0:0: [sdb] Attached SCSI disk |
| 619 | [ 1.403277] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| 620 | [ 1.437063] sda: sda1 sda4 sda5 |
| 621 | [ 1.438295] sd 0:0:0:0: [sda] Attached SCSI disk |
| 622 | [ 1.473837] device-mapper: uevent: version 1.0.3 |
| 623 | [ 1.474025] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com |
| 624 | [ 1.690365] usb 2-1.5: new full-speed USB device number 3 using ehci-pci |
| 625 | [ 1.779996] hidraw: raw HID events driver (C) Jiri Kosina |
| 626 | [ 1.791911] usbcore: registered new interface driver usbhid |
| 627 | [ 1.791918] usbhid: USB HID core driver |
| 628 | [ 2.231009] Switched to clocksource tsc |
| 629 | [ 4.023436] random: nonblocking pool is initialized |
| 630 | [ 6.064010] NET: Registered protocol family 38 |
| 631 | [ 6.298577] raid6: sse2x1 8302 MB/s |
| 632 | [ 6.355320] raid6: sse2x2 10668 MB/s |
| 633 | [ 6.412050] raid6: sse2x4 12297 MB/s |
| 634 | [ 6.412052] raid6: using algorithm sse2x4 (12297 MB/s) |
| 635 | [ 6.412054] raid6: using ssse3x2 recovery algorithm |
| 636 | [ 6.412242] xor: automatically using best checksumming function: |
| 637 | [ 6.445406] avx : 23487.600 MB/sec |
| 638 | [ 6.448313] Btrfs loaded |
| 639 | [ 6.450223] BTRFS: device label root devid 1 transid 12224 /dev/dm-0 |
| 640 | [ 6.464522] BTRFS info (device dm-0): disk space caching is enabled |
| 641 | [ 6.464525] BTRFS: has skinny extents |
| 642 | [ 6.479237] BTRFS: detected SSD devices, enabling SSD mode |
| 643 | [ 6.678043] systemd-journald[57]: Received SIGTERM from PID 1 (systemd). |
| 644 | [ 6.944891] fuse init (API version 7.23) |
| 645 | [ 6.951037] hdaps: supported laptop not found! |
| 646 | [ 6.951041] hdaps: driver init failed (ret=-19)! |
| 647 | [ 6.995456] BTRFS info (device dm-0): turning on discard |
| 648 | [ 6.995460] BTRFS info (device dm-0): disk space caching is enabled |
| 649 | [ 6.997851] FS-Cache: Loaded |
| 650 | [ 7.030360] RPC: Registered named UNIX socket transport module. |
| 651 | [ 7.030363] RPC: Registered udp transport module. |
| 652 | [ 7.030364] RPC: Registered tcp transport module. |
| 653 | [ 7.030364] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 654 | [ 7.048039] systemd-journald[255]: Failed to open system journal: Invalid argument |
| 655 | [ 7.062511] FS-Cache: Netfs 'nfs' registered for caching |
| 656 | [ 7.066468] systemd-journald[255]: Received request to flush runtime journal from PID 1 |
| 657 | [ 7.118532] systemd-journald[255]: Failed to open system journal: Invalid argument |
| 658 | [ 7.383561] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 659 | [ 7.385007] pps_core: LinuxPPS API ver. 1 registered |
| 660 | [ 7.385011] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| 661 | [ 7.386096] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140724/utaddress-258) |
| 662 | [ 7.386106] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 663 | [ 7.386112] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258) |
| 664 | [ 7.386118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 665 | [ 7.386121] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258) |
| 666 | [ 7.386127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 667 | [ 7.386130] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258) |
| 668 | [ 7.386135] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 669 | [ 7.386137] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| 670 | [ 7.390049] PTP clock support registered |
| 671 | [ 7.392298] mei_me 0000:00:16.0: irq 30 for MSI/MSI-X |
| 672 | [ 7.396572] thermal LNXTHERM:00: registered as thermal_zone0 |
| 673 | [ 7.396577] ACPI: Thermal Zone [THM0] (30 C) |
| 674 | [ 7.402767] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| 675 | [ 7.402771] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. |
| 676 | [ 7.402877] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 677 | [ 7.402908] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X |
| 678 | [ 7.419942] thermal LNXTHERM:01: registered as thermal_zone1 |
| 679 | [ 7.419947] ACPI: Thermal Zone [THM1] (27 C) |
| 680 | [ 7.420383] ACPI: AC Adapter [AC] (off-line) |
| 681 | [ 7.421698] Non-volatile memory driver v1.3 |
| 682 | [ 7.425910] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| 683 | [ 7.425913] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| 684 | [ 7.425915] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-7803-g3ae558f, EC 8ZHT34WW-3.20 |
| 685 | [ 7.425916] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4299Y46 |
| 686 | [ 7.426182] thinkpad_acpi: detected a 8-level brightness capable ThinkPad |
| 687 | [ 7.426224] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| 688 | [ 7.426226] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| 689 | [ 7.439109] cfg80211: Calling CRDA to update world regulatory domain |
| 690 | [ 7.439668] ACPI: Battery Slot [BAT0] (battery present) |
| 691 | [ 7.439943] ACPI: Battery Slot [BAT1] (battery absent) |
| 692 | [ 7.448448] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| 693 | [ 7.448546] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| 694 | [ 7.449872] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 |
| 695 | [ 7.467953] Intel(R) Wireless WiFi driver for Linux, in-tree: |
| 696 | [ 7.467956] Copyright(c) 2003- 2014 Intel Corporation |
| 697 | [ 7.468462] iwlwifi 0000:02:00.0: irq 32 for MSI/MSI-X |
| 698 | [ 7.472237] intel_rapl: Found RAPL domain package |
| 699 | [ 7.472241] intel_rapl: Found RAPL domain core |
| 700 | [ 7.472293] intel_rapl: Found RAPL domain uncore |
| 701 | [ 7.476213] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm |
| 702 | [ 7.480123] iTCO_vendor_support: vendor-support=0 |
| 703 | [ 7.484241] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| 704 | [ 7.484296] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560) |
| 705 | [ 7.484446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 706 | [ 7.500037] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled |
| 707 | [ 7.500040] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled |
| 708 | [ 7.500042] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled |
| 709 | [ 7.500043] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 |
| 710 | [ 7.500096] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled |
| 711 | [ 7.510472] cfg80211: World regulatory domain updated: |
| 712 | [ 7.510476] cfg80211: DFS Master region: unset |
| 713 | [ 7.510478] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 714 | [ 7.510481] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A) |
| 715 | [ 7.510483] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A) |
| 716 | [ 7.510485] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| 717 | [ 7.510488] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) |
| 718 | [ 7.510490] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) |
| 719 | [ 7.510492] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) |
| 720 | [ 7.510494] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| 721 | [ 7.510496] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| 722 | [ 7.518220] cfg80211: Calling CRDA for country: DE |
| 723 | [ 7.521714] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' |
| 724 | [ 7.544079] cfg80211: Regulatory domain changed to country: DE |
| 725 | [ 7.544082] cfg80211: DFS Master region: ETSI |
| 726 | [ 7.544084] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 727 | [ 7.544087] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| 728 | [ 7.544089] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| 729 | [ 7.544092] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| 730 | [ 7.544094] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s) |
| 731 | [ 7.544095] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| 732 | [ 7.548956] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| 733 | [ 7.672884] e1000e 0000:00:19.0 eth0: registered PHC clock |
| 734 | [ 7.672894] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:77:d6:81 |
| 735 | [ 7.672899] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| 736 | [ 7.672957] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| 737 | [ 7.673254] snd_hda_intel 0000:00:1b.0: irq 33 for MSI/MSI-X |
| 738 | [ 7.673599] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt |
| 739 | [ 7.701702] sound hdaudioC0D0: CX20590: BIOS auto-probing. |
| 740 | [ 7.702147] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker |
| 741 | [ 7.702151] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| 742 | [ 7.702153] sound hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) |
| 743 | [ 7.702155] sound hdaudioC0D0: mono: mono_out=0x0 |
| 744 | [ 7.702157] sound hdaudioC0D0: inputs: |
| 745 | [ 7.702160] sound hdaudioC0D0: Mic=0x1b |
| 746 | [ 7.702163] sound hdaudioC0D0: Internal Mic=0x23 |
| 747 | [ 7.702165] sound hdaudioC0D0: Dock Mic=0x1a |
| 748 | [ 7.703232] sound hdaudioC0D0: Enable sync_write for stable communication |
| 749 | [ 7.714405] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8 |
| 750 | [ 7.715015] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| 751 | [ 7.715132] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| 752 | [ 7.715270] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| 753 | [ 7.715400] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| 754 | [ 7.715524] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| 755 | [ 7.715653] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| 756 | [ 7.715774] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| 757 | [ 7.782007] hdaps: supported laptop not found! |
| 758 | [ 7.782013] hdaps: driver init failed (ret=-19)! |
| 759 | [ 7.903231] elevator: type bfq not found |
| 760 | [ 7.904896] elevator: switch to bfq failed |
| 761 | [ 8.279029] Adding 8388604k swap on /dev/mapper/swap. Priority:-1 extents:1 across:8388604k FS |
| 762 | [ 8.361149] ip_tables: (C) 2000-2006 Netfilter Core Team |
| 763 | [ 8.393761] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) |
| 764 | [ 8.478320] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00, board id: 1611, fw id: 774180 |
| 765 | [ 8.478331] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| 766 | [ 8.535510] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 |
| 767 | [ 8.541198] mousedev: PS/2 mouse device common for all mice |
| 768 | [ 8.787337] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled |
| 769 | [ 8.794234] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| 770 | [ 9.013078] hdaps: supported laptop not found! |
| 771 | [ 9.013081] hdaps: driver init failed (ret=-19)! |
| 772 | [ 9.044585] applesmc: supported laptop not found! |
| 773 | [ 9.044589] applesmc: driver init failed (ret=-19)! |
| 774 | [ 9.059626] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled |
| 775 | [ 9.066721] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| 776 | [ 9.079809] wmi: Mapper loaded |
| 777 | [ 9.085024] Bluetooth: Core ver 2.19 |
| 778 | [ 9.085300] NET: Registered protocol family 31 |
| 779 | [ 9.085303] Bluetooth: HCI device and connection manager initialized |
| 780 | [ 9.085312] Bluetooth: HCI socket layer initialized |
| 781 | [ 9.085316] Bluetooth: L2CAP socket layer initialized |
| 782 | [ 9.085323] Bluetooth: SCO socket layer initialized |
| 783 | [ 9.092862] acer_wmi: Acer Laptop ACPI-WMI Extras |
| 784 | [ 9.092871] acer_wmi: No or unsupported WMI interface, unable to load |
| 785 | [ 9.101578] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input17 |
| 786 | [ 9.101755] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0 |
| 787 | [ 9.102205] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input19 |
| 788 | [ 9.103214] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1 |
| 789 | [ 9.136047] usbcore: registered new interface driver btusb |
| 790 | [ 9.141012] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 791 | [ 9.163284] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 792 | [ 9.163288] Bluetooth: BNEP filters: protocol multicast |
| 793 | [ 9.163297] Bluetooth: BNEP socket layer initialized |
| 794 | [ 9.298144] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X |
| 795 | [ 9.398827] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X |
| 796 | [ 9.398918] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 797 | [ 11.993126] wlan0: authenticate with 00:15:0c:db:27:cd |
| 798 | [ 11.995271] wlan0: send auth to 00:15:0c:db:27:cd (try 1/3) |
| 799 | [ 11.997202] wlan0: authenticated |
| 800 | [ 11.997293] wlan0: waiting for beacon from 00:15:0c:db:27:cd |
| 801 | [ 12.091871] wlan0: associate with 00:15:0c:db:27:cd (try 1/3) |
| 802 | [ 12.096538] wlan0: RX AssocResp from 00:15:0c:db:27:cd (capab=0x411 status=0 aid=1) |
| 803 | [ 12.099689] wlan0: associated |
| 804 | [ 12.099715] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| 805 | [ 13.313549] BTRFS: device label archlinux devid 1 transid 63202 /dev/dm-2 |
| 806 | [ 13.341803] BTRFS info (device dm-2): disk space caching is enabled |
| 807 | [ 13.341810] BTRFS: has skinny extents |
| 808 | [ 14.345078] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| 809 | [ 14.635812] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16 |
| 810 | [ 16.652276] wlan0: deauthenticating from 00:15:0c:db:27:cd by local choice (Reason: 3=DEAUTH_LEAVING) |
| 811 | [ 16.659685] cfg80211: Calling CRDA to update world regulatory domain |
| 812 | [ 16.677539] cfg80211: World regulatory domain updated: |
| 813 | [ 16.677543] cfg80211: DFS Master region: unset |
| 814 | [ 16.677545] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 815 | [ 16.677548] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A) |
| 816 | [ 16.677550] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A) |
| 817 | [ 16.677552] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| 818 | [ 16.677553] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) |
| 819 | [ 16.677555] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) |
| 820 | [ 16.677557] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) |
| 821 | [ 16.677559] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| 822 | [ 16.677561] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| 823 | [ 16.677766] cfg80211: Calling CRDA for country: DE |
| 824 | [ 16.679401] cfg80211: Regulatory domain changed to country: DE |
| 825 | [ 16.679405] cfg80211: DFS Master region: ETSI |
| 826 | [ 16.679406] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 827 | [ 16.679409] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| 828 | [ 16.679411] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| 829 | [ 16.679413] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| 830 | [ 16.679415] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s) |
| 831 | [ 16.679417] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| 832 | [ 16.876947] elevator: type bfq not found |
| 833 | [ 16.876974] elevator: switch to bfq failed |
| 834 | [ 21.794897] Bluetooth: RFCOMM TTY layer initialized |
| 835 | [ 21.794909] Bluetooth: RFCOMM socket layer initialized |
| 836 | [ 21.794913] Bluetooth: RFCOMM ver 1.11 |
| 837 | [ 37.072370] Bits 55-60 of /proc/PID/pagemap entries are about to stop being page-shift some time soon. See the linux/Documentation/vm/pagemap.txt for details. |
| 838 | [ 38.155483] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled |
| 839 | [ 38.162405] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| 840 | [ 38.238107] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 841 | [ 40.809956] wlan0: authenticate with 00:15:0c:db:27:cd |
| 842 | [ 40.810794] wlan0: send auth to 00:15:0c:db:27:cd (try 1/3) |
| 843 | [ 40.812630] wlan0: authenticated |
| 844 | [ 40.814695] wlan0: associate with 00:15:0c:db:27:cd (try 1/3) |
| 845 | [ 40.819360] wlan0: RX AssocResp from 00:15:0c:db:27:cd (capab=0x411 status=0 aid=3) |
| 846 | [ 40.822828] wlan0: associated |
| 847 | [ 40.822854] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| 848 | [ 1259.833776] usb 1-1.2: new high-speed USB device number 6 using ehci-pci |
| 849 | [ 2177.931093] wlan0: deauthenticating from 00:15:0c:db:27:cd by local choice (Reason: 3=DEAUTH_LEAVING) |
| 850 | [ 2177.934758] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| 851 | [ 2177.935209] cfg80211: Calling CRDA to update world regulatory domain |
| 852 | [ 2177.952021] cfg80211: World regulatory domain updated: |
| 853 | [ 2177.952028] cfg80211: DFS Master region: unset |
| 854 | [ 2177.952031] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 855 | [ 2177.952036] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A) |
| 856 | [ 2177.952039] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A) |
| 857 | [ 2177.952043] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| 858 | [ 2177.952046] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) |
| 859 | [ 2177.952050] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) |
| 860 | [ 2177.952053] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) |
| 861 | [ 2177.952056] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| 862 | [ 2177.952060] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| 863 | [ 2177.952466] cfg80211: Calling CRDA for country: DE |
| 864 | [ 2177.956846] cfg80211: Regulatory domain changed to country: DE |
| 865 | [ 2177.956854] cfg80211: DFS Master region: ETSI |
| 866 | [ 2177.956858] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 867 | [ 2177.956866] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| 868 | [ 2177.956872] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| 869 | [ 2177.956877] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| 870 | [ 2177.956883] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s) |
| 871 | [ 2177.956888] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| 872 | [ 2178.000521] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 873 | [ 2178.147947] e1000e: eth0 NIC Link is Down |
| 874 | [ 2178.148617] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 875 | [ 2178.333224] elevator: type bfq not found |
| 876 | [ 2178.333228] elevator: switch to bfq failed |
| 877 | [ 2178.397223] PM: Syncing filesystems ... done. |
| 878 | [ 2178.842117] PM: Preparing system for mem sleep |
| 879 | [ 2178.848973] Freezing user space processes ... (elapsed 0.039 seconds) done. |
| 880 | [ 2178.888657] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. |
| 881 | [ 2178.889591] PM: Entering mem sleep |
| 882 | [ 2178.889604] Suspending console(s) (use no_console_suspend to debug) |
| 883 | [ 2179.088948] sd 2:0:0:0: [sdb] Synchronizing SCSI cache |
| 884 | [ 2179.089029] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| 885 | [ 2179.089356] sd 0:0:0:0: [sda] Stopping disk |
| 886 | [ 2179.099629] sd 2:0:0:0: [sdb] Stopping disk |
| 887 | [ 2179.178817] e1000e: EEE TX LPI TIMER: 00000011 |
| 888 | [ 2179.577233] PM: suspend of devices complete after 686.727 msecs |
| 889 | [ 2179.590554] PM: late suspend of devices complete after 13.301 msecs |
| 890 | [ 2179.591149] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI |
| 891 | [ 2179.591235] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI |
| 892 | [ 2179.603822] PM: noirq suspend of devices complete after 13.250 msecs |
| 893 | [ 2179.604001] ACPI: Preparing to enter system sleep state S3 |
| 894 | [ 2179.604932] PM: Saving platform NVS memory |
| 895 | [ 2179.604933] Disabling non-boot CPUs ... |
| 896 | [ 2179.604970] intel_pstate CPU 1 exiting |
| 897 | [ 2179.605147] Broke affinity for irq 29 |
| 898 | [ 2179.606159] kvm: disabling virtualization on CPU1 |
| 899 | [ 2179.707155] smpboot: CPU 1 is now offline |
| 900 | [ 2179.707419] intel_pstate CPU 2 exiting |
| 901 | [ 2179.707582] Broke affinity for irq 32 |
| 902 | [ 2179.708594] kvm: disabling virtualization on CPU2 |
| 903 | [ 2179.810607] smpboot: CPU 2 is now offline |
| 904 | [ 2179.810873] intel_pstate CPU 3 exiting |
| 905 | [ 2179.810993] Broke affinity for irq 19 |
| 906 | [ 2179.812022] kvm: disabling virtualization on CPU3 |
| 907 | [ 2179.914058] smpboot: CPU 3 is now offline |
| 908 | [ 2179.915198] ACPI: Low-level resume complete |
| 909 | [ 2179.915239] PM: Restoring platform NVS memory |
| 910 | [ 2179.915578] Enabling non-boot CPUs ... |
| 911 | [ 2179.915616] x86: Booting SMP configuration: |
| 912 | [ 2179.915616] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| 913 | [ 2179.926708] kvm: enabling virtualization on CPU1 |
| 914 | [ 2179.928994] CPU1 is up |
| 915 | [ 2179.929017] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| 916 | [ 2179.940093] kvm: enabling virtualization on CPU2 |
| 917 | [ 2179.942392] CPU2 is up |
| 918 | [ 2179.942419] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| 919 | [ 2179.953496] kvm: enabling virtualization on CPU3 |
| 920 | [ 2179.955829] CPU3 is up |
| 921 | [ 2179.958784] ACPI: Waking up from system sleep state S3 |
| 922 | [ 2180.062154] mei_me 0000:00:16.0: Refused to change power state, currently in D3 |
| 923 | [ 2180.062300] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI |
| 924 | [ 2180.062358] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI |
| 925 | [ 2180.065578] sdhci-pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz. |
| 926 | [ 2180.122541] PM: noirq resume of devices complete after 73.005 msecs |
| 927 | [ 2180.122837] PM: early resume of devices complete after 0.272 msecs |
| 928 | [ 2180.122908] genirq: Flags mismatch irq 0. 00000080 (mei_me) vs. 00015a00 (timer) |
| 929 | [ 2180.122924] mei_me 0000:00:16.0: request_threaded_irq failed: irq = 0. |
| 930 | [ 2180.122930] dpm_run_callback(): pci_pm_resume+0x0/0xb0 returns -16 |
| 931 | [ 2180.122931] PM: Device 0000:00:16.0 failed to resume async: error -16 |
| 932 | [ 2180.126482] rtc_cmos 00:03: System wakeup disabled by ACPI |
| 933 | [ 2180.126613] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X |
| 934 | [ 2180.128007] sd 0:0:0:0: [sda] Starting disk |
| 935 | [ 2180.128008] sd 2:0:0:0: [sdb] Starting disk |
| 936 | [ 2180.271509] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X |
| 937 | [ 2180.329512] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci |
| 938 | [ 2180.329513] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci |
| 939 | [ 2180.439356] ata2: SATA link down (SStatus 0 SControl 300) |
| 940 | [ 2180.446040] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 941 | [ 2180.458445] ata3.00: configured for UDMA/133 |
| 942 | [ 2180.482877] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci |
| 943 | [ 2180.633017] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| 944 | [ 2180.738267] PM: resume of devices complete after 614.721 msecs |
| 945 | [ 2180.738736] PM: Finishing wakeup. |
| 946 | [ 2180.738737] Restarting tasks ... done. |
| 947 | [ 2180.750325] video LNXVIDEO:00: Restoring backlight state |
| 948 | [ 2181.994413] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 949 | [ 2181.996739] ata1.00: configured for UDMA/133 |
| 950 | [ 2182.164798] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled |
| 951 | [ 2182.171708] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| 952 | [ 2182.255464] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 953 | [ 2182.407878] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X |
| 954 | [ 2182.508353] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X |
| 955 | [ 2182.508436] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 956 | [ 2182.521536] elevator: type bfq not found |
| 957 | [ 2182.521542] elevator: switch to bfq failed |
| 958 | [ 2185.082910] wlan0: authenticate with 00:15:0c:db:27:cd |
| 959 | [ 2185.084146] wlan0: send auth to 00:15:0c:db:27:cd (try 1/3) |
| 960 | [ 2185.086054] wlan0: authenticated |
| 961 | [ 2185.087937] wlan0: associate with 00:15:0c:db:27:cd (try 1/3) |
| 962 | [ 2185.093006] wlan0: RX AssocResp from 00:15:0c:db:27:cd (capab=0x411 status=0 aid=3) |
| 963 | [ 2185.105922] wlan0: associated |
| 964 | [ 2185.105996] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| 965 | [ 2228.192324] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx |
| 966 | [ 2228.192339] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO |
| 967 | [ 2228.192386] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 968 | [ 2232.652207] wlan0: deauthenticating from 00:15:0c:db:27:cd by local choice (Reason: 3=DEAUTH_LEAVING) |
| 969 | [ 2232.657828] cfg80211: Calling CRDA to update world regulatory domain |
| 970 | [ 2232.662398] cfg80211: World regulatory domain updated: |
| 971 | [ 2232.662408] cfg80211: DFS Master region: unset |
| 972 | [ 2232.662411] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 973 | [ 2232.662416] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A) |
| 974 | [ 2232.662419] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A) |
| 975 | [ 2232.662423] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| 976 | [ 2232.662427] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) |
| 977 | [ 2232.662430] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) |
| 978 | [ 2232.662433] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) |
| 979 | [ 2232.662437] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| 980 | [ 2232.662440] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| 981 | [ 2232.662467] cfg80211: Calling CRDA for country: DE |
| 982 | [ 2232.665343] cfg80211: Regulatory domain changed to country: DE |
| 983 | [ 2232.665348] cfg80211: DFS Master region: ETSI |
| 984 | [ 2232.665350] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 985 | [ 2232.665353] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| 986 | [ 2232.665356] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| 987 | [ 2232.665359] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| 988 | [ 2232.665361] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s) |
| 989 | [ 2232.665372] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| 990 | [ 7845.988136] elevator: type bfq not found |
| 991 | [ 7845.988140] elevator: switch to bfq failed |