blob: 2c8254d04805179becf041146defe5887591c545 [file] [log] [blame]
persmule6b9c11a2018-03-26 21:53:48 +08001[ 0.000000] Linux version 4.14.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-3)) #1 SMP Debian 4.14.17-1 (2018-02-14)
2[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.0-3-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro module.sig_enforce=1 quiet iomem=relaxed
3[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
4[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
5[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
6[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
7[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
8[ 0.000000] e820: BIOS-provided physical RAM map:
9[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
10[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fee8fff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000007fee9000-0x00000000829fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable
18[ 0.000000] NX (Execute Disable) protection: active
19[ 0.000000] random: fast init done
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: HP EliteBook Folio 9470m/EliteBook Folio 9470m, BIOS 4.7-444-gc8f3984239 03/18/2018
22[ 0.000000] tsc: Fast TSC calibration using PIT
23[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
24[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
25[ 0.000000] e820: last_pfn = 0x47d600 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: write-back
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-FFFFF write-back
31[ 0.000000] MTRR variable ranges enabled:
32[ 0.000000] 0 base 080000000 mask FC0000000 uncachable
33[ 0.000000] 1 base 0C0000000 mask FF0000000 uncachable
34[ 0.000000] 2 base 0D0000000 mask FF0000000 write-combining
35[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
36[ 0.000000] 4 disabled
37[ 0.000000] 5 disabled
38[ 0.000000] 6 disabled
39[ 0.000000] 7 disabled
40[ 0.000000] 8 disabled
41[ 0.000000] 9 disabled
42[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
43[ 0.000000] e820: last_pfn = 0x7fee9 max_arch_pfn = 0x400000000
44[ 0.000000] Base memory trampoline at [ffff9073c0099000] 99000 size 24576
45[ 0.000000] BRK [0x1a0006000, 0x1a0006fff] PGTABLE
46[ 0.000000] BRK [0x1a0007000, 0x1a0007fff] PGTABLE
47[ 0.000000] BRK [0x1a0008000, 0x1a0008fff] PGTABLE
48[ 0.000000] BRK [0x1a0009000, 0x1a0009fff] PGTABLE
49[ 0.000000] BRK [0x1a000a000, 0x1a000afff] PGTABLE
50[ 0.000000] BRK [0x1a000b000, 0x1a000bfff] PGTABLE
51[ 0.000000] BRK [0x1a000c000, 0x1a000cfff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x34f1b000-0x36784fff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F66B0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000007FF0F0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000007FF125E0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000007FF0F280 00335D (v03 COREv4 COREBOOT 20141018 INTL 20161222)
58[ 0.000000] ACPI: FACS 0x000000007FF0F240 000040
59[ 0.000000] ACPI: FACS 0x000000007FF0F240 000040
60[ 0.000000] ACPI: SSDT 0x000000007FF126E0 0019E8 (v02 CORE COREBOOT 0000002A CORE 0000002A)
61[ 0.000000] ACPI: MCFG 0x000000007FF140D0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: TCPA 0x000000007FF14110 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: APIC 0x000000007FF14150 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: DMAR 0x000000007FF141C0 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: HPET 0x000000007FF14270 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: Local APIC address 0xfee00000
67[ 0.000000] No NUMA configuration found
68[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047d5fffff]
69[ 0.000000] NODE_DATA(0) allocated [mem 0x47d5ee000-0x47d5f2fff]
70[ 0.000000] Zone ranges:
71[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
72[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
73[ 0.000000] Normal [mem 0x0000000100000000-0x000000047d5fffff]
74[ 0.000000] Device empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
78[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fee8fff]
79[ 0.000000] node 0: [mem 0x0000000100000000-0x000000047d5fffff]
80[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff]
81[ 0.000000] On node 0 totalpages: 4183175
82[ 0.000000] DMA zone: 64 pages used for memmap
83[ 0.000000] DMA zone: 21 pages reserved
84[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
85[ 0.000000] DMA32 zone: 8124 pages used for memmap
86[ 0.000000] DMA32 zone: 519913 pages, LIFO batch:31
87[ 0.000000] Normal zone: 57176 pages used for memmap
88[ 0.000000] Normal zone: 3659264 pages, LIFO batch:31
89[ 0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff
90[ 0.000000] ACPI: PM-Timer IO Port: 0x508
91[ 0.000000] ACPI: Local APIC address 0xfee00000
92[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
93[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
94[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
95[ 0.000000] ACPI: IRQ0 used by override.
96[ 0.000000] ACPI: IRQ9 used by override.
97[ 0.000000] Using ACPI (MADT) for SMP configuration information
98[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
99[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
100[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
102[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
103[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
104[ 0.000000] PM: Registered nosave memory: [mem 0x7fee9000-0x829fffff]
105[ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
106[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
107[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
108[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
109[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
110[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
111[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
112[ 0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
113[ 0.000000] Booting paravirtualized kernel on bare hardware
114[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
115[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
116[ 0.000000] percpu: Embedded 44 pages/cpu @ffff90783d200000 s142232 r8192 d29800 u524288
117[ 0.000000] pcpu-alloc: s142232 r8192 d29800 u524288 alloc=1*2097152
118[ 0.000000] pcpu-alloc: [0] 0 1 2 3
119[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4117790
120[ 0.000000] Policy zone: Normal
121[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.0-3-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro module.sig_enforce=1 quiet iomem=relaxed
122[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
123[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
124[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
125[ 0.000000] Memory: 16356036K/16732700K available (10252K kernel code, 1146K rwdata, 3040K rodata, 1512K init, 664K bss, 376664K reserved, 0K cma-reserved)
126[ 0.000000] Kernel/User page tables isolation: enabled
127[ 0.000000] ftrace: allocating 29041 entries in 114 pages
128[ 0.000000] Hierarchical RCU implementation.
129[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
130[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
131[ 0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
132[ 0.000000] Console: colour VGA+ 80x25
133[ 0.000000] console [tty0] enabled
134[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
135[ 0.000000] hpet clockevent registered
136[ 0.000000] tsc: Fast TSC calibration using PIT
137[ 0.004000] tsc: Detected 1895.717 MHz processor
138[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3791.43 BogoMIPS (lpj=7582868)
139[ 0.004000] pid_max: default: 32768 minimum: 301
140[ 0.004000] ACPI: Core revision 20170728
141[ 0.010498] ACPI: 2 ACPI AML tables successfully acquired and loaded
142[ 0.010540] Security Framework initialized
143[ 0.010542] Yama: disabled by default; enable with sysctl kernel.yama.*
144[ 0.010561] AppArmor: AppArmor initialized
145[ 0.013357] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
146[ 0.014761] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
147[ 0.014826] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
148[ 0.014869] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
149[ 0.015110] CPU: Physical Processor ID: 0
150[ 0.015111] CPU: Processor Core ID: 0
151[ 0.015121] mce: CPU supports 7 MCE banks
152[ 0.015132] CPU0: Thermal monitoring enabled (TM1)
153[ 0.015142] process: using mwait in idle threads
154[ 0.015145] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
155[ 0.015146] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
156[ 0.015148] Spectre V2 mitigation: Mitigation: Full generic retpoline
157[ 0.015264] Freeing SMP alternatives memory: 28K
158[ 0.016824] smpboot: Max logical packages: 2
159[ 0.016829] DMAR: Host address width 36
160[ 0.016831] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
161[ 0.016840] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
162[ 0.016842] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
163[ 0.016846] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
164[ 0.016848] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
165[ 0.016849] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
166[ 0.016851] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
167[ 0.017201] DMAR-IR: Enabled IRQ remapping in x2apic mode
168[ 0.017203] x2apic enabled
169[ 0.017209] Switched APIC routing to cluster x2apic.
170[ 0.017693] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
171[ 0.057398] TSC deadline timer enabled
172[ 0.057401] smpboot: CPU0: Intel(R) Core(TM) i5-3437U CPU @ 1.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
173[ 0.057499] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
174[ 0.057527] ... version: 3
175[ 0.057527] ... bit width: 48
176[ 0.057528] ... generic registers: 4
177[ 0.057529] ... value mask: 0000ffffffffffff
178[ 0.057530] ... max period: 00007fffffffffff
179[ 0.057530] ... fixed-purpose events: 3
180[ 0.057531] ... event mask: 000000070000000f
181[ 0.057576] Hierarchical SRCU implementation.
182[ 0.058316] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
183[ 0.058334] smp: Bringing up secondary CPUs ...
184[ 0.058446] x86: Booting SMP configuration:
185[ 0.058447] .... node #0, CPUs: #1 #2 #3
186[ 0.064067] smp: Brought up 1 node, 4 CPUs
187[ 0.064067] smpboot: Total of 4 processors activated (15165.73 BogoMIPS)
188[ 0.068167] devtmpfs: initialized
189[ 0.068167] x86/mm: Memory block size: 128MB
190[ 0.069721] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
191[ 0.069721] futex hash table entries: 1024 (order: 4, 65536 bytes)
192[ 0.069721] pinctrl core: initialized pinctrl subsystem
193[ 0.069721] NET: Registered protocol family 16
194[ 0.069721] cpuidle: using governor ladder
195[ 0.069721] cpuidle: using governor menu
196[ 0.069721] ACPI: bus type PCI registered
197[ 0.069721] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
198[ 0.069721] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
199[ 0.069721] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
200[ 0.069721] PCI: Using configuration type 1 for base access
201[ 0.069721] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
202[ 0.069721] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
203[ 0.072077] ACPI: Added _OSI(Module Device)
204[ 0.072078] ACPI: Added _OSI(Processor Device)
205[ 0.072079] ACPI: Added _OSI(3.0 _SCP Extensions)
206[ 0.072080] ACPI: Added _OSI(Processor Aggregator Device)
207[ 0.072231] ACPI: Executed 1 blocks of module-level executable AML code
208[ 0.074359] ACPI Error: No handler for Region [ECRM] (ffff90782c93aee8) [EmbeddedControl] (20170728/evregion-166)
209[ 0.074424] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170728/exfldio-299)
210[ 0.074484] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20170728/psparse-550)
211[ 0.075233] ACPI: EC: EC started
212[ 0.075234] ACPI: EC: interrupt blocked
213[ 0.081886] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
214[ 0.081888] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
215[ 0.081890] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
216[ 0.081891] ACPI: Interpreter enabled
217[ 0.081912] ACPI: (supports S0 S3 S4 S5)
218[ 0.081913] ACPI: Using IOAPIC for interrupt routing
219[ 0.081936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
220[ 0.082080] ACPI: GPE 0x01 active on init
221[ 0.082086] ACPI: Enabled 1 GPEs in block 00 to 3F
222[ 0.083717] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
223[ 0.083717] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
224[ 0.083717] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
225[ 0.083717] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
226[ 0.083717] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff])
227[ 0.083717] PCI host bridge to bus 0000:00
228[ 0.083717] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
229[ 0.083717] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
230[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
231[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
232[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
233[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
234[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
235[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
236[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
237[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
238[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
239[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
240[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
241[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
242[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
243[ 0.083717] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
244[ 0.083717] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
245[ 0.083717] pci_bus 0000:00: root bus resource [bus 00-ff]
246[ 0.083717] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
247[ 0.083717] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
248[ 0.083717] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
249[ 0.083717] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
250[ 0.083717] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
251[ 0.083717] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
252[ 0.083717] pci 0000:00:04.0: reg 0x10: [mem 0xe1930000-0xe1937fff 64bit]
253[ 0.083717] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
254[ 0.083717] pci 0000:00:14.0: reg 0x10: [mem 0xe1920000-0xe192ffff 64bit]
255[ 0.083717] pci 0000:00:14.0: PME# supported from D3hot D3cold
256[ 0.083717] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
257[ 0.083717] pci 0000:00:19.0: reg 0x10: [mem 0xe1900000-0xe191ffff]
258[ 0.083717] pci 0000:00:19.0: reg 0x14: [mem 0xe193c000-0xe193cfff]
259[ 0.083717] pci 0000:00:19.0: reg 0x18: [io 0x2040-0x205f]
260[ 0.083717] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
261[ 0.083717] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
262[ 0.083717] pci 0000:00:1a.0: reg 0x10: [mem 0xe193e000-0xe193e3ff]
263[ 0.083717] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
264[ 0.083717] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
265[ 0.083725] pci 0000:00:1b.0: reg 0x10: [mem 0xe1938000-0xe193bfff 64bit]
266[ 0.083810] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
267[ 0.083899] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
268[ 0.084071] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
269[ 0.084162] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
270[ 0.084253] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
271[ 0.084346] pci 0000:00:1c.2: [8086:1e16] type 01 class 0x060400
272[ 0.084436] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
273[ 0.084535] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
274[ 0.084561] pci 0000:00:1d.0: reg 0x10: [mem 0xe193f000-0xe193f3ff]
275[ 0.084653] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
276[ 0.084736] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
277[ 0.084927] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
278[ 0.084951] pci 0000:00:1f.2: reg 0x10: [io 0x2080-0x2087]
279[ 0.084960] pci 0000:00:1f.2: reg 0x14: [io 0x2090-0x2093]
280[ 0.084969] pci 0000:00:1f.2: reg 0x18: [io 0x2088-0x208f]
281[ 0.084979] pci 0000:00:1f.2: reg 0x1c: [io 0x2094-0x2097]
282[ 0.084989] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
283[ 0.084998] pci 0000:00:1f.2: reg 0x24: [mem 0xe193d000-0xe193d7ff]
284[ 0.085049] pci 0000:00:1f.2: PME# supported from D3hot
285[ 0.085127] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
286[ 0.085149] pci 0000:00:1f.3: reg 0x10: [mem 0xe1940000-0xe19400ff 64bit]
287[ 0.085172] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
288[ 0.085315] pci 0000:00:1c.0: PCI bridge to [bus 01]
289[ 0.085419] pci 0000:02:00.0: [197b:2392] type 00 class 0x088000
290[ 0.085465] pci 0000:02:00.0: reg 0x10: [mem 0xe0810000-0xe08100ff]
291[ 0.085582] pci 0000:02:00.0: reg 0x30: [mem 0xe0800000-0xe080ffff pref]
292[ 0.085603] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1
293[ 0.085781] pci 0000:02:00.2: [197b:2391] type 00 class 0x080501
294[ 0.085827] pci 0000:02:00.2: reg 0x10: [mem 0xe0811000-0xe08110ff]
295[ 0.086127] pci 0000:02:00.3: [197b:2393] type 00 class 0x088000
296[ 0.086174] pci 0000:02:00.3: reg 0x10: [mem 0xe0812000-0xe08120ff]
297[ 0.086471] pci 0000:02:00.4: [197b:2394] type 00 class 0x088000
298[ 0.086517] pci 0000:02:00.4: reg 0x10: [mem 0xe0813000-0xe08130ff]
299[ 0.100058] pci 0000:00:1c.1: PCI bridge to [bus 02]
300[ 0.100063] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
301[ 0.100068] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
302[ 0.100075] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
303[ 0.100160] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
304[ 0.100229] pci 0000:03:00.0: reg 0x10: [mem 0xe1800000-0xe181ffff 64bit]
305[ 0.100349] pci 0000:03:00.0: reg 0x30: [mem 0xe1820000-0xe182ffff pref]
306[ 0.100512] pci 0000:03:00.0: supports D1
307[ 0.100514] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
308[ 0.116068] pci 0000:00:1c.2: PCI bridge to [bus 03]
309[ 0.116075] pci 0000:00:1c.2: bridge window [mem 0xe1800000-0xe18fffff]
310[ 0.116215] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
311[ 0.116278] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
312[ 0.116339] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
313[ 0.116397] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
314[ 0.116454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
315[ 0.116511] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
316[ 0.116568] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
317[ 0.116625] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
318[ 0.120003] ACPI: EC: interrupt unblocked
319[ 0.120003] ACPI: EC: event unblocked
320[ 0.120003] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
321[ 0.120003] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
322[ 0.120013] pci 0000:00:02.0: vgaarb: setting as boot VGA device
323[ 0.120013] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
324[ 0.120016] pci 0000:00:02.0: vgaarb: bridge control possible
325[ 0.120016] vgaarb: loaded
326[ 0.120068] EDAC MC: Ver: 3.0.0
327[ 0.120168] PCI: Using ACPI for IRQ routing
328[ 0.121717] PCI: pci_cache_line_size set to 64 bytes
329[ 0.121800] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
330[ 0.121802] e820: reserve RAM buffer [mem 0x7fee9000-0x7fffffff]
331[ 0.121803] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff]
332[ 0.121920] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
333[ 0.121920] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
334[ 0.125024] clocksource: Switched to clocksource hpet
335[ 0.135261] VFS: Disk quotas dquot_6.6.0
336[ 0.135288] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
337[ 0.135403] AppArmor: AppArmor Filesystem Enabled
338[ 0.135424] pnp: PnP ACPI init
339[ 0.135542] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
340[ 0.135545] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
341[ 0.135547] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
342[ 0.135549] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
343[ 0.135551] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
344[ 0.135553] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
345[ 0.135556] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
346[ 0.135558] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
347[ 0.135560] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
348[ 0.135562] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
349[ 0.135569] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
350[ 0.135975] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
351[ 0.135980] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
352[ 0.136044] system 00:02: [io 0x0500-0x057f] has been reserved
353[ 0.136046] system 00:02: [io 0x0480-0x04bf] has been reserved
354[ 0.136051] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
355[ 0.136075] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
356[ 0.136116] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
357[ 0.136147] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
358[ 0.136178] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
359[ 0.136199] pnp: PnP ACPI: found 7 devices
360[ 0.142801] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
361[ 0.142840] pci 0000:00:1c.0: PCI bridge to [bus 01]
362[ 0.142856] pci 0000:00:1c.1: PCI bridge to [bus 02]
363[ 0.142859] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
364[ 0.142865] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
365[ 0.142870] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
366[ 0.142877] pci 0000:00:1c.2: PCI bridge to [bus 03]
367[ 0.142883] pci 0000:00:1c.2: bridge window [mem 0xe1800000-0xe18fffff]
368[ 0.142893] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
369[ 0.142895] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
370[ 0.142897] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
371[ 0.142899] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
372[ 0.142901] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
373[ 0.142902] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
374[ 0.142904] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
375[ 0.142906] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
376[ 0.142908] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
377[ 0.142910] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
378[ 0.142912] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
379[ 0.142913] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
380[ 0.142915] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
381[ 0.142917] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
382[ 0.142919] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
383[ 0.142921] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
384[ 0.142922] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
385[ 0.142925] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
386[ 0.142926] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
387[ 0.142928] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
388[ 0.142930] pci_bus 0000:03: resource 1 [mem 0xe1800000-0xe18fffff]
389[ 0.143021] NET: Registered protocol family 2
390[ 0.143222] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
391[ 0.143476] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
392[ 0.143612] TCP: Hash tables configured (established 131072 bind 65536)
393[ 0.143658] UDP hash table entries: 8192 (order: 6, 262144 bytes)
394[ 0.143707] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
395[ 0.143814] NET: Registered protocol family 1
396[ 0.143830] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
397[ 0.144450] PCI: CLS 64 bytes, default 64
398[ 0.144500] Unpacking initramfs...
399[ 0.689502] Freeing initrd memory: 25000K
400[ 0.689555] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
401[ 0.689559] software IO TLB [mem 0x7bee9000-0x7fee9000] (64MB) mapped at [ffff90743bee9000-ffff90743fee8fff]
402[ 0.689971] audit: initializing netlink subsys (disabled)
403[ 0.690035] audit: type=2000 audit(1522070546.688:1): state=initialized audit_enabled=0 res=1
404[ 0.690413] workingset: timestamp_bits=40 max_order=22 bucket_order=0
405[ 0.690459] zbud: loaded
406[ 1.126955] Key type asymmetric registered
407[ 1.126956] Asymmetric key parser 'x509' registered
408[ 1.126978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
409[ 1.127016] io scheduler noop registered
410[ 1.127017] io scheduler deadline registered
411[ 1.127034] io scheduler cfq registered (default)
412[ 1.127034] io scheduler mq-deadline registered
413[ 1.127734] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
414[ 1.127764] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
415[ 1.127810] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
416[ 1.127838] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
417[ 1.127893] intel_idle: MWAIT substates: 0x21120
418[ 1.127894] intel_idle: v0.4.1 model 0x3A
419[ 1.128076] intel_idle: lapic_timer_reliable_states 0xffffffff
420[ 1.128640] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
421[ 1.129076] Linux agpgart interface v0.103
422[ 1.155801] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
423[ 1.284012] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
424[ 1.284012] AMD IOMMUv2 functionality not available on this system
425[ 1.284415] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
426[ 1.286250] i8042: Detected active multiplexing controller, rev 1.1
427[ 1.287016] serio: i8042 KBD port at 0x60,0x64 irq 1
428[ 1.287021] serio: i8042 AUX0 port at 0x60,0x64 irq 12
429[ 1.287052] serio: i8042 AUX1 port at 0x60,0x64 irq 12
430[ 1.287077] serio: i8042 AUX2 port at 0x60,0x64 irq 12
431[ 1.287101] serio: i8042 AUX3 port at 0x60,0x64 irq 12
432[ 1.287293] mousedev: PS/2 mouse device common for all mice
433[ 1.287339] rtc_cmos 00:03: RTC can wake from S4
434[ 1.287506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
435[ 1.287537] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
436[ 1.287550] intel_pstate: Intel P-state driver initializing
437[ 1.287798] ledtrig-cpu: registered to indicate activity on CPUs
438[ 1.288325] NET: Registered protocol family 10
439[ 1.288875] Segment Routing with IPv6
440[ 1.288911] mip6: Mobile IPv6
441[ 1.288915] NET: Registered protocol family 17
442[ 1.288920] mpls_gso: MPLS GSO support
443[ 1.289556] microcode: sig=0x306a9, pf=0x10, revision=0x1b
444[ 1.289769] microcode: Microcode Update Driver: v2.2.
445[ 1.289806] sched_clock: Marking stable (1289734204, 0)->(1285356438, 4377766)
446[ 1.290439] registered taskstats version 1
447[ 1.290480] zswap: loaded using pool lzo/zbud
448[ 1.290687] AppArmor: AppArmor sha1 policy hashing enabled
449[ 1.312356] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
450[ 1.602650] rtc_cmos 00:03: setting system clock to 2018-03-26 13:22:28 UTC (1522070548)
451[ 1.607637] Freeing unused kernel memory: 1512K
452[ 1.607639] Write protecting the kernel read-only data: 16384k
453[ 1.608489] Freeing unused kernel memory: 2012K
454[ 1.611465] Freeing unused kernel memory: 1056K
455[ 1.619762] x86/mm: Checked W+X mappings: passed, no W+X pages found.
456[ 1.619762] x86/mm: Checking user space page tables
457[ 1.625165] x86/mm: Checked W+X mappings: passed, no W+X pages found.
458[ 1.692015] tsc: Refined TSC clocksource calibration: 1895.693 MHz
459[ 1.692024] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a68ea8fe5, max_idle_ns: 881590678518 ns
460[ 1.758444] pps_core: LinuxPPS API ver. 1 registered
461[ 1.758446] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
462[ 1.758863] PTP clock support registered
463[ 1.762866] ACPI: bus type USB registered
464[ 1.762896] usbcore: registered new interface driver usbfs
465[ 1.762909] usbcore: registered new interface driver hub
466[ 1.762942] usbcore: registered new device driver usb
467[ 1.764998] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
468[ 1.764999] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
469[ 1.765084] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
470[ 1.766916] SCSI subsystem initialized
471[ 1.767211] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
472[ 1.769042] ehci-pci: EHCI PCI platform driver
473[ 1.780192] AVX version of gcm_enc/dec engaged.
474[ 1.780193] AES CTR mode by8 optimization enabled
475[ 1.780255] libata version 3.00 loaded.
476[ 1.783228] sdhci: Secure Digital Host Controller Interface driver
477[ 1.783229] sdhci: Copyright(c) Pierre Ossman
478[ 1.783718] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2392] (rev 30)
479[ 1.784367] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
480[ 1.784385] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2391] (rev 30)
481[ 1.784635] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
482[ 1.913895] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
483[ 2.039299] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:84:1e:a5
484[ 2.039301] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
485[ 2.039355] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
486[ 2.039581] ehci-pci 0000:00:1a.0: EHCI Host Controller
487[ 2.039600] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
488[ 2.039631] ehci-pci 0000:00:1a.0: debug port 2
489[ 2.043583] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
490[ 2.043626] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe193e000
491[ 2.056064] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
492[ 2.056170] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
493[ 2.056174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
494[ 2.056177] usb usb1: Product: EHCI Host Controller
495[ 2.056180] usb usb1: Manufacturer: Linux 4.14.0-3-amd64 ehci_hcd
496[ 2.056184] usb usb1: SerialNumber: 0000:00:1a.0
497[ 2.056594] hub 1-0:1.0: USB hub found
498[ 2.056609] hub 1-0:1.0: 3 ports detected
499[ 2.057034] ehci-pci 0000:00:1d.0: EHCI Host Controller
500[ 2.057044] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
501[ 2.057062] ehci-pci 0000:00:1d.0: debug port 2
502[ 2.060977] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
503[ 2.061016] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe193f000
504[ 2.076097] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
505[ 2.076238] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
506[ 2.076243] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
507[ 2.076247] usb usb2: Product: EHCI Host Controller
508[ 2.076250] usb usb2: Manufacturer: Linux 4.14.0-3-amd64 ehci_hcd
509[ 2.076254] usb usb2: SerialNumber: 0000:00:1d.0
510[ 2.076687] hub 2-0:1.0: USB hub found
511[ 2.076704] hub 2-0:1.0: 3 ports detected
512[ 2.077311] xhci_hcd 0000:00:14.0: xHCI Host Controller
513[ 2.077324] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
514[ 2.078443] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
515[ 2.078453] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
516[ 2.078644] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
517[ 2.078649] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
518[ 2.078652] usb usb3: Product: xHCI Host Controller
519[ 2.078656] usb usb3: Manufacturer: Linux 4.14.0-3-amd64 xhci-hcd
520[ 2.078659] usb usb3: SerialNumber: 0000:00:14.0
521[ 2.078989] hub 3-0:1.0: USB hub found
522[ 2.079020] hub 3-0:1.0: 4 ports detected
523[ 2.079481] xhci_hcd 0000:00:14.0: xHCI Host Controller
524[ 2.079494] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
525[ 2.079630] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
526[ 2.079637] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
527[ 2.079642] usb usb4: Product: xHCI Host Controller
528[ 2.079648] usb usb4: Manufacturer: Linux 4.14.0-3-amd64 xhci-hcd
529[ 2.079653] usb usb4: SerialNumber: 0000:00:14.0
530[ 2.080025] hub 4-0:1.0: USB hub found
531[ 2.080056] hub 4-0:1.0: 4 ports detected
532[ 2.080948] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
533[ 2.082512] ahci 0000:00:1f.2: version 3.0
534[ 2.082920] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
535[ 2.082981] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
536[ 2.082992] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
537[ 2.084623] scsi host0: ahci
538[ 2.084783] scsi host1: ahci
539[ 2.084930] scsi host2: ahci
540[ 2.085079] scsi host3: ahci
541[ 2.085223] scsi host4: ahci
542[ 2.085376] scsi host5: ahci
543[ 2.085446] ata1: SATA max UDMA/133 abar m2048@0xe193d000 port 0xe193d100 irq 31
544[ 2.085449] ata2: SATA max UDMA/133 abar m2048@0xe193d000 port 0xe193d180 irq 31
545[ 2.085451] ata3: DUMMY
546[ 2.085452] ata4: DUMMY
547[ 2.085454] ata5: DUMMY
548[ 2.085455] ata6: DUMMY
549[ 2.145338] random: crng init done
550[ 2.392009] usb 1-1: new high-speed USB device number 2 using ehci-pci
551[ 2.398456] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
552[ 2.399114] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
553[ 2.399115] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
554[ 2.399772] ata1.00: configured for UDMA/133
555[ 2.399963] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
556[ 2.412012] usb 2-1: new high-speed USB device number 2 using ehci-pci
557[ 2.412020] usb 3-1: new high-speed USB device number 2 using xhci_hcd
558[ 2.548422] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
559[ 2.548426] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
560[ 2.548758] hub 1-1:1.0: USB hub found
561[ 2.548924] hub 1-1:1.0: 6 ports detected
562[ 2.560316] usb 3-1: New USB device found, idVendor=0424, idProduct=2134
563[ 2.560318] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
564[ 2.560319] usb 3-1: Product: USB2134B
565[ 2.560320] usb 3-1: Manufacturer: SMSC
566[ 2.560525] hub 3-1:1.0: USB hub found
567[ 2.560549] hub 3-1:1.0: 4 ports detected
568[ 2.568416] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
569[ 2.568418] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
570[ 2.568571] hub 2-1:1.0: USB hub found
571[ 2.568682] hub 2-1:1.0: 8 ports detected
572[ 2.599881] irq 23: nobody cared (try booting with the "irqpoll" option)
573[ 2.599938] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.0-3-amd64 #1 Debian 4.14.17-1
574[ 2.599939] Hardware name: HP EliteBook Folio 9470m/EliteBook Folio 9470m, BIOS 4.7-444-gc8f3984239 03/18/2018
575[ 2.599940] Call Trace:
576[ 2.599942] <IRQ>
577[ 2.599948] dump_stack+0x5c/0x85
578[ 2.599953] __report_bad_irq+0x33/0xc0
579[ 2.599955] note_interrupt+0x244/0x290
580[ 2.599958] handle_irq_event_percpu+0x54/0x80
581[ 2.599960] handle_irq_event+0x3c/0x60
582[ 2.599963] handle_fasteoi_irq+0x8c/0x160
583[ 2.599967] handle_irq+0x1f/0x30
584[ 2.599971] do_IRQ+0x41/0xd0
585[ 2.599973] common_interrupt+0x98/0x98
586[ 2.599975] </IRQ>
587[ 2.599977] RIP: 0010:poll_idle+0x2f/0x5c
588[ 2.599978] RSP: 0018:ffffffff9f603e88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff7c
589[ 2.599980] RAX: ffffffff9f612480 RBX: ffffffff9f6b04a0 RCX: 0000000000000000
590[ 2.599981] RDX: 0000000000000000 RSI: ffffffff9f6b04a0 RDI: ffffd42dffc0a400
591[ 2.599982] RBP: ffffd42dffc0a400 R08: 00000000ffffffff R09: 0000000000000000
592[ 2.599983] R10: ffffffff9f603e70 R11: 0000000000000000 R12: 0000000000000000
593[ 2.599983] R13: ffffffff9f6b04b8 R14: 0000000000000000 R15: 00000000997d8269
594[ 2.599986] ? acpi_idle_do_entry+0x40/0x40
595[ 2.599990] cpuidle_enter_state+0x6f/0x2e0
596[ 2.599993] do_idle+0x181/0x1e0
597[ 2.599996] cpu_startup_entry+0x6f/0x80
598[ 2.599998] start_kernel+0x462/0x482
599[ 2.600002] secondary_startup_64+0xa5/0xb0
600[ 2.600004] handlers:
601[ 2.600051] [<ffffffffc03f4080>] i801_isr [i2c_i801]
602[ 2.600101] Disabling IRQ #23
603[ 2.688140] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
604[ 2.708752] usb 4-1: New USB device found, idVendor=0424, idProduct=5534
605[ 2.708755] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
606[ 2.708757] usb 4-1: Product: USB5534B
607[ 2.708774] usb 4-1: Manufacturer: SMSC
608[ 2.709377] hub 4-1:1.0: USB hub found
609[ 2.709903] hub 4-1:1.0: 4 ports detected
610[ 2.714848] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
611[ 2.716226] clocksource: Switched to clocksource tsc
612[ 2.718160] ata2.00: ATA-8: SanDisk SD5SF2032G1010E, 10.01.10, max UDMA/133
613[ 2.718180] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
614[ 2.718883] ata2.00: configured for UDMA/133
615[ 2.719295] scsi 1:0:0:0: Direct-Access ATA SanDisk SD5SF203 1.10 PQ: 0 ANSI: 5
616[ 2.726056] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
617[ 2.726061] sd 0:0:0:0: [sda] 4096-byte physical blocks
618[ 2.726083] sd 0:0:0:0: [sda] Write Protect is off
619[ 2.726088] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
620[ 2.726121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
621[ 2.726293] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
622[ 2.726307] sd 1:0:0:0: [sdb] Write Protect is off
623[ 2.726309] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
624[ 2.726332] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
625[ 2.728086] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
626[ 2.728479] sd 1:0:0:0: [sdb] Attached SCSI disk
627[ 2.731527] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5
628[ 2.779340] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
629[ 2.780154] sd 0:0:0:0: [sda] Attached SCSI disk
630[ 2.836045] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
631[ 2.856050] usb 2-1.8: new full-speed USB device number 3 using ehci-pci
632[ 2.953431] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d
633[ 2.953438] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
634[ 2.953442] usb 1-1.1: SerialNumber: 00b012b6d98f
635[ 2.971283] usb 2-1.8: New USB device found, idVendor=058f, idProduct=9540
636[ 2.971285] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
637[ 2.971286] usb 2-1.8: Product: EMV Smartcard Reader
638[ 2.971287] usb 2-1.8: Manufacturer: Generic
639[ 3.032075] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
640[ 3.192305] usb 1-1.3: New USB device found, idVendor=05c8, idProduct=034b
641[ 3.192312] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
642[ 3.192316] usb 1-1.3: Product: HP HD Webcam [Fixed]
643[ 3.192320] usb 1-1.3: Manufacturer: SPCA2062 PC Camera
644[ 3.204228] psmouse serio4: synaptics: queried max coordinates: x [..5660], y [..4742]
645[ 3.242430] psmouse serio4: synaptics: queried min coordinates: x [1282..], y [1110..]
646[ 3.242453] psmouse serio4: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
647[ 3.312134] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x27c00/0x0, board id: 2251, fw id: 1241283
648[ 3.340035] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
649[ 3.356668] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
650[ 3.452691] usb 1-1.5: New USB device found, idVendor=8087, idProduct=07da
651[ 3.452698] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
652[ 3.944007] raid6: sse2x1 gen() 8668 MB/s
653[ 4.012005] raid6: sse2x1 xor() 6243 MB/s
654[ 4.080000] raid6: sse2x2 gen() 10375 MB/s
655[ 4.148004] raid6: sse2x2 xor() 6937 MB/s
656[ 4.216004] raid6: sse2x4 gen() 12403 MB/s
657[ 4.283999] raid6: sse2x4 xor() 7939 MB/s
658[ 4.284001] raid6: using algorithm sse2x4 gen() 12403 MB/s
659[ 4.284001] raid6: .... xor() 7939 MB/s, rmw enabled
660[ 4.284002] raid6: using ssse3x2 recovery algorithm
661[ 4.284266] xor: automatically using best checksumming function avx
662[ 4.284479] async_tx: api initialized (async)
663[ 4.323759] Btrfs loaded, crc32c=crc32c-intel
664[ 4.986878] PM: Starting manual resume from disk
665[ 4.987056] PM: Image not found (code -22)
666[ 5.106984] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
667[ 5.534724] ip_tables: (C) 2000-2006 Netfilter Core Team
668[ 5.548770] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
669[ 5.568098] systemd[1]: Detected architecture x86-64.
670[ 5.569526] systemd[1]: Set hostname to <universi-mcbk52>.
671[ 5.939830] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
672[ 5.939833] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
673[ 6.146388] systemd[1]: Reached target System Time Synchronized.
674[ 6.146525] systemd[1]: Listening on fsck to fsckd communication Socket.
675[ 6.146584] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
676[ 6.147199] systemd[1]: Created slice User and Session Slice.
677[ 6.147274] systemd[1]: Listening on LVM2 metadata daemon socket.
678[ 6.202800] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
679[ 6.251328] RPC: Registered named UNIX socket transport module.
680[ 6.251329] RPC: Registered udp transport module.
681[ 6.251330] RPC: Registered tcp transport module.
682[ 6.251330] RPC: Registered tcp NFSv4.1 backchannel transport module.
683[ 6.314014] lp: driver loaded but no devices found
684[ 6.318112] ppdev: user-space parallel port driver
685[ 6.711504] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
686[ 6.731434] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input9
687[ 6.731469] ACPI: Lid Switch [LID]
688[ 6.731535] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10
689[ 6.731579] ACPI: Power Button [PWRF]
690[ 6.735632] ACPI: AC Adapter [AC] (on-line)
691[ 6.776150] ACPI: Battery Slot [BAT0] (battery absent)
692[ 6.776244] ACPI: Battery Slot [BAT1] (battery absent)
693[ 6.794694] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170728/utaddress-247)
694[ 6.794701] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
695[ 6.794704] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247)
696[ 6.794708] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
697[ 6.794709] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247)
698[ 6.794713] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
699[ 6.794714] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247)
700[ 6.794718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
701[ 6.794719] lpc_ich: Resource conflict(s) found affecting gpio_ich
702[ 6.795036] sd 0:0:0:0: Attached scsi generic sg0 type 0
703[ 6.798022] sd 1:0:0:0: Attached scsi generic sg1 type 0
704[ 6.836622] input: PC Speaker as /devices/platform/pcspkr/input/input11
705[ 6.860593] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
706[ 6.860595] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
707[ 6.860596] RAPL PMU: hw unit of domain package 2^-16 Joules
708[ 6.860597] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
709[ 6.930024] [drm] Memory usable by graphics device = 2048M
710[ 6.930026] [drm] Replacing VGA console driver
711[ 6.930981] Console: switching to colour dummy device 80x25
712[ 6.960636] ath: phy0: Killer Wireless card detected
713[ 6.972398] ath: phy0: ASPM enabled: 0x43
714[ 6.972401] ath: EEPROM regdomain: 0x60
715[ 6.972402] ath: EEPROM indicates we should expect a direct regpair map
716[ 6.972404] ath: Country alpha2 being used: 00
717[ 6.972404] ath: Regpair used: 0x60
718[ 6.989763] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
719[ 6.989765] [drm] Driver supports precise vblank timestamp query.
720[ 6.990053] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
721[ 6.993366] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
722[ 6.993790] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb42e02260000, irq=19
723[ 7.033901] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
724[ 7.034094] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
725[ 7.035896] acpi device:03: registered as cooling_device5
726[ 7.035970] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
727[ 7.065462] intel_rapl: Found RAPL domain package
728[ 7.065464] intel_rapl: Found RAPL domain core
729[ 7.065465] intel_rapl: Found RAPL domain uncore
730[ 7.072479] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
731[ 7.104425] fbcon: inteldrmfb (fb0) is primary device
732[ 7.124500] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
733[ 7.124503] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
734[ 7.124505] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
735[ 7.124507] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
736[ 7.124508] snd_hda_codec_idt hdaudioC0D0: inputs:
737[ 7.124511] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
738[ 7.124513] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
739[ 7.124514] snd_hda_codec_idt hdaudioC0D0: Line=0xf
740[ 7.158719] iTCO_vendor_support: vendor-support=0
741[ 7.166129] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
742[ 7.166179] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
743[ 7.166290] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
744[ 7.181857] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
745[ 7.182567] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
746[ 7.182638] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
747[ 7.182701] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
748[ 7.182765] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
749[ 7.182829] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
750[ 7.182894] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
751[ 7.328637] Adding 8389628k swap on /dev/sda2. Priority:-2 extents:1 across:8389628k FS
752[ 7.807328] Console: switching to colour frame buffer device 200x56
753[ 7.833423] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
754[ 7.986515] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
755[ 7.988843] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
756[ 8.009521] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
757[ 8.500966] media: Linux media interface: v0.10
758[ 8.513305] Bluetooth: Core ver 2.22
759[ 8.513317] NET: Registered protocol family 31
760[ 8.513318] Bluetooth: HCI device and connection manager initialized
761[ 8.513322] Bluetooth: HCI socket layer initialized
762[ 8.513324] Bluetooth: L2CAP socket layer initialized
763[ 8.513334] Bluetooth: SCO socket layer initialized
764[ 8.514315] Linux video capture interface: v2.00
765[ 8.665404] usbcore: registered new interface driver btusb
766[ 8.668604] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (05c8:034b)
767[ 8.677108] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
768[ 8.677110] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
769[ 8.677111] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
770[ 8.677113] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
771[ 8.677178] input: HP HD Webcam [Fixed]: HP HD Web as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input20
772[ 8.677238] usbcore: registered new interface driver uvcvideo
773[ 8.677239] USB Video Class driver (1.1.1)
774[ 9.005150] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
775[ 9.583219] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
776[ 10.018653] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
777[ 10.069883] systemd-journald[320]: Received request to flush runtime journal from PID 1
778[ 10.079071] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
779[ 10.244135] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
780[ 10.723448] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
781[ 10.835644] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
782[ 11.063227] audit: type=1400 audit(1522070557.953:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=963 comm="apparmor_parser"
783[ 11.063232] audit: type=1400 audit(1522070557.953:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=963 comm="apparmor_parser"
784[ 11.063235] audit: type=1400 audit(1522070557.953:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=963 comm="apparmor_parser"
785[ 11.077560] audit: type=1400 audit(1522070557.969:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=960 comm="apparmor_parser"
786[ 11.077564] audit: type=1400 audit(1522070557.969:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=960 comm="apparmor_parser"
787[ 11.078331] audit: type=1400 audit(1522070557.969:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=965 comm="apparmor_parser"
788[ 11.079615] audit: type=1400 audit(1522070557.969:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=966 comm="apparmor_parser"
789[ 11.082004] audit: type=1400 audit(1522070557.973:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=968 comm="apparmor_parser"
790[ 11.083094] audit: type=1400 audit(1522070557.973:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="icedove" pid=962 comm="apparmor_parser"
791[ 11.083098] audit: type=1400 audit(1522070557.973:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="icedove//gpg" pid=962 comm="apparmor_parser"
792[ 11.613251] nfc: nfc_init: NFC Core ver 0.1
793[ 11.613274] NET: Registered protocol family 39
794[ 11.760042] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
795[ 11.760043] Bluetooth: BNEP filters: protocol multicast
796[ 11.760047] Bluetooth: BNEP socket layer initialized
797[ 12.119913] ata1.00: configured for UDMA/133
798[ 12.119916] ata1: EH complete
799[ 15.141390] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
800[ 15.400316] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
801[ 15.407966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
802[ 15.418602] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
803[ 15.435196] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
804[ 15.720189] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
805[ 17.653787] ip6_tables: (C) 2000-2006 Netfilter Core Team
806[ 17.746002] Ebtables v2.0 registered
807[ 19.476126] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
808[ 23.155679] wlan0: authenticate with f8:1a:67:5a:c4:75
809[ 23.166480] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
810[ 23.168362] wlan0: authenticated
811[ 23.171363] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
812[ 23.172983] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=3)
813[ 23.173113] wlan0: associated
814[ 23.202044] ath: EEPROM regdomain: 0x809c
815[ 23.202046] ath: EEPROM indicates we should expect a country code
816[ 23.202046] ath: doing EEPROM country->regdmn map search
817[ 23.202047] ath: country maps to regdmn code: 0x52
818[ 23.202048] ath: Country alpha2 being used: CN
819[ 23.202048] ath: Regpair used: 0x52
820[ 23.202049] ath: regdomain 0x809c dynamically updated by country IE
821[ 23.202113] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
822[ 29.195767] Bluetooth: RFCOMM TTY layer initialized
823[ 29.195776] Bluetooth: RFCOMM socket layer initialized
824[ 29.195782] Bluetooth: RFCOMM ver 1.11