Gitiles
Code Review Sign In
review.coreboot.org / board-status / 262857116fa8ee217b6176472e053563e7efe2b0 / . / amd / olivehill / 4.0-7005-gb9a0809 / 2014-10-08T13:44:17Z / kernel_log.txt
blob: 1c37e2ae11e85c64cba2310a8414d955a68a20c5 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame^]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.11.0-13-generic (root@amd-desktop) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9) ) #20 SMP Wed Nov 27 05:54:32 EST 2013 (Ubuntu 3.11.0-13.20-generic 3.11.6)
5[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=39bae622-efc7-4a51-9545-aa6bd5df8382 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
6[ 0.000000] KERNEL supported cpus:
7[ 0.000000] Intel GenuineIntel
8[ 0.000000] AMD AuthenticAMD
9[ 0.000000] Centaur CentaurHauls
10[ 0.000000] e820: BIOS-provided physical RAM map:
11[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
12[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf10efff] usable
15[ 0.000000] BIOS-e820: [mem 0x00000000bf10f000-0x00000000dfffffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
18[ 0.000000] NX (Execute Disable) protection: active
19[ 0.000000] SMBIOS 2.7 present.
20[ 0.000000] DMI: AMD DB-FT3/DB-FT3, BIOS 4.0-7005-gb9a0809 10/09/2014
21[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
22[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
23[ 0.000000] No AGP bridge found
24[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
25[ 0.000000] MTRR default type: uncachable
26[ 0.000000] MTRR fixed ranges enabled:
27[ 0.000000] 00000-9FFFF write-back
28[ 0.000000] A0000-BFFFF uncachable
29[ 0.000000] C0000-FFFFF write-back
30[ 0.000000] MTRR variable ranges enabled:
31[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
32[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
33[ 0.000000] 2 disabled
34[ 0.000000] 3 disabled
35[ 0.000000] 4 disabled
36[ 0.000000] 5 disabled
37[ 0.000000] 6 base 00FFC00000 mask FFFFC00000 write-protect
38[ 0.000000] 7 disabled
39[ 0.000000] TOM2: 0000000120000000 aka 4608M
40[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
41[ 0.000000] e820: last_pfn = 0xbf10f max_arch_pfn = 0x400000000
42[ 0.000000] found SMP MP-table at [mem 0x000f1a60-0x000f1a6f] mapped at [ffff8800000f1a60]
43[ 0.000000] Scanning 1 areas for low memory corruption
44[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
45[ 0.000000] Using GB pages for direct mapping
46[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
47[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
48[ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
49[ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
50[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
51[ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
52[ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M
53[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
54[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
55[ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M
56[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
57[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
58[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf10efff]
59[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
60[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
61[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
62[ 0.000000] [mem 0x80000000-0xbeffffff] page 2M
63[ 0.000000] [mem 0xbf000000-0xbf10efff] page 4k
64[ 0.000000] RAMDISK: [mem 0x35eaa000-0x36f4cfff]
65[ 0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 3568MB)
66[ 0.000000] ACPI: RSDP 00000000000f1a40 00014 (v00 CORE )
67[ 0.000000] ACPI: RSDT 00000000bf132624 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: FACP 00000000bf133d48 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: DSDT 00000000bf1326c8 01640 (v02 AMD COREBOOT 00010001 INTL 20130626)
70[ 0.000000] ACPI: FACS 00000000bf133d08 00040
71[ 0.000000] ACPI: HPET 00000000bf133e40 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: APIC 00000000bf133e78 0007E (v01 CORE COREBOOT 00000000 CORE 00000000)
73[ 0.000000] ACPI: HEST 00000000bf133ef8 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
74[ 0.000000] ACPI: SSDT 00000000bf1340d0 046D1 (v02 AMD AGESA 00000002 MSFT 04000000)
75[ 0.000000] ACPI: SSDT 00000000bf1387b0 00CB4 (v01 AMD AGESA 00000001 AMD 00000001)
76[ 0.000000] ACPI: SSDT 00000000bf139464 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
77[ 0.000000] ACPI: Local APIC address 0xfee00000
78[ 0.000000] No NUMA configuration found
79[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
80[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
81[ 0.000000] NODE_DATA [mem 0x11fff9000-0x11fffdfff]
82[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011be00000-ffff88011f5fffff] on node 0
83[ 0.000000] Zone ranges:
84[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
85[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
86[ 0.000000] Normal [mem 0x100000000-0x11fffffff]
87[ 0.000000] Movable zone start for each node
88[ 0.000000] Early memory node ranges
89[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
90[ 0.000000] node 0: [mem 0x00100000-0xbf10efff]
91[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
92[ 0.000000] On node 0 totalpages: 913581
93[ 0.000000] DMA zone: 64 pages used for memmap
94[ 0.000000] DMA zone: 21 pages reserved
95[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
96[ 0.000000] DMA32 zone: 12165 pages used for memmap
97[ 0.000000] DMA32 zone: 778511 pages, LIFO batch:31
98[ 0.000000] Normal zone: 2048 pages used for memmap
99[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
100[ 0.000000] ACPI: PM-Timer IO Port: 0x818
101[ 0.000000] ACPI: Local APIC address 0xfee00000
102[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
103[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
104[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
105[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
106[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
107[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
108[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
109[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
110[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
111[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
112[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
113[ 0.000000] ACPI: IRQ0 used by override.
114[ 0.000000] ACPI: IRQ2 used by override.
115[ 0.000000] ACPI: IRQ9 used by override.
116[ 0.000000] Using ACPI (MADT) for SMP configuration information
117[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
118[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
119[ 0.000000] nr_irqs_gsi: 72
120[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
121[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
122[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0xbf10f000-0xdfffffff]
124[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
125[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
127[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
128[ 0.000000] Booting paravirtualized kernel on bare hardware
129[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
130[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fc00000 s86720 r8192 d23872 u524288
131[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
132[ 0.000000] pcpu-alloc: [0] 0 1 2 3
133[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 899283
134[ 0.000000] Policy zone: Normal
135[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=39bae622-efc7-4a51-9545-aa6bd5df8382 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
136[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
137[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
138[ 0.000000] Checking aperture...
139[ 0.000000] No AGP bridge found
140[ 0.000000] Node 0: aperture @ 0 size 32 MB
141[ 0.000000] Your BIOS doesn't leave a aperture memory hole
142[ 0.000000] Please enable the IOMMU option in the BIOS setup
143[ 0.000000] This costs you 64 MB of RAM
144[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
145[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
146[ 0.000000] Memory: 3300240K/3654324K available (7141K kernel code, 1081K rwdata, 3260K rodata, 1364K init, 1420K bss, 354084K reserved)
147[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
148[ 0.000000] Hierarchical RCU implementation.
149[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
150[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
151[ 0.000000] Offload RCU callbacks from all CPUs
152[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
153[ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
154[ 0.000000] spurious 8259A interrupt: IRQ7.
155[ 0.000000] Console: colour dummy device 80x25
156[ 0.000000] console [tty0] enabled
157[ 0.000000] allocated 14680064 bytes of page_cgroup
158[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
159[ 0.000000] hpet clockevent registered
160[ 0.000000] tsc: Fast TSC calibration using PIT
161[ 0.004000] tsc: Detected 1996.309 MHz processor
162[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.61 BogoMIPS (lpj=7985236)
163[ 0.000009] pid_max: default: 32768 minimum: 301
164[ 0.000051] Security Framework initialized
165[ 0.000079] AppArmor: AppArmor initialized
166[ 0.000082] Yama: becoming mindful.
167[ 0.000592] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
168[ 0.002295] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
169[ 0.003021] Mount-cache hash table entries: 256
170[ 0.003324] Initializing cgroup subsys memory
171[ 0.003343] Initializing cgroup subsys devices
172[ 0.003346] Initializing cgroup subsys freezer
173[ 0.003349] Initializing cgroup subsys blkio
174[ 0.003351] Initializing cgroup subsys perf_event
175[ 0.003356] Initializing cgroup subsys hugetlb
176[ 0.003389] tseg: 0000000000
177[ 0.003399] CPU: Physical Processor ID: 0
178[ 0.003401] CPU: Processor Core ID: 0
179[ 0.003404] mce: CPU supports 6 MCE banks
180[ 0.003413] LVT offset 1 assigned for vector 0xf9
181[ 0.003421] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
182[ 0.003421] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128
183[ 0.003421] tlb_flushall_shift: 5
184[ 0.003584] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
185[ 0.006776] ACPI: Core revision 20130517
186[ 0.012031] ACPI: All ACPI Tables successfully acquired
187[ 0.012040] ftrace: allocating 27803 entries in 109 pages
188[ 0.029456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
189[ 0.069154] smpboot: CPU0: AMD Eng Sample: 2M201079J4461_00/20/08/06_9830 (fam: 16, model: 00, stepping: 01)
190[ 0.175692] Performance Events: AMD PMU driver.
191[ 0.175699] ... version: 0
192[ 0.175701] ... bit width: 48
193[ 0.175703] ... generic registers: 4
194[ 0.175705] ... value mask: 0000ffffffffffff
195[ 0.175707] ... max period: 00007fffffffffff
196[ 0.175709] ... fixed-purpose events: 0
197[ 0.175711] ... event mask: 000000000000000f
198[ 0.178396] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
199[ 0.178543] smpboot: Booting Node 0, Processors #1 #2 #3 OK
200[ 0.218240] Brought up 4 CPUs
201[ 0.218248] smpboot: Total of 4 processors activated (15970.47 BogoMIPS)
202[ 0.219343] devtmpfs: initialized
203[ 0.221325] EVM: security.selinux
204[ 0.221327] EVM: security.SMACK64
205[ 0.221330] EVM: security.capability
206[ 0.222986] regulator-dummy: no parameters
207[ 0.223019] RTC time: 18:41:26, date: 03/19/14
208[ 0.223080] NET: Registered protocol family 16
209[ 0.223348] ACPI: bus type PCI registered
210[ 0.223352] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
211[ 0.223427] PCI: Using configuration type 1 for base access
212[ 0.223429] PCI: Using configuration type 1 for extended access
213[ 0.223717] mtrr: your CPUs had inconsistent variable MTRR settings
214[ 0.223720] mtrr: probably your BIOS does not setup all CPUs.
215[ 0.223721] mtrr: corrected configuration.
216[ 0.225001] bio: create slab <bio-0> at 0
217[ 0.225286] ACPI: Added _OSI(Module Device)
218[ 0.225289] ACPI: Added _OSI(Processor Device)
219[ 0.225291] ACPI: Added _OSI(3.0 _SCP Extensions)
220[ 0.225294] ACPI: Added _OSI(Processor Aggregator Device)
221[ 0.226318] ACPI: EC: Look up EC in DSDT
222[ 0.227431] ACPI: Executed 1 blocks of module-level executable AML code
223[ 0.233143] ACPI: Interpreter enabled
224[ 0.233177] ACPI: (supports S0 S1 S2 S3 S4 S5)
225[ 0.233179] ACPI: Using IOAPIC for interrupt routing
226[ 0.233199] HEST: Table parsing has been initialized.
227[ 0.233204] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
228[ 0.233296] ACPI: No dock devices found.
229[ 0.237516] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
230[ 0.237610] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
231[ 0.237694] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
232[ 0.237816] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
233[ 0.237963] PCI host bridge to bus 0000:00
234[ 0.237968] pci_bus 0000:00: root bus resource [bus 00-ff]
235[ 0.237972] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
236[ 0.237975] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
237[ 0.237979] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
238[ 0.237982] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
239[ 0.237986] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
240[ 0.237998] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
241[ 0.238134] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
242[ 0.238151] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
243[ 0.238164] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
244[ 0.238173] pci 0000:00:01.0: reg 0x20: [io 0x2000-0x20ff]
245[ 0.238182] pci 0000:00:01.0: reg 0x24: [mem 0xf0a00000-0xf0a3ffff]
246[ 0.238191] pci 0000:00:01.0: reg 0x30: [mem 0xf0a40000-0xf0a5ffff pref]
247[ 0.238232] pci 0000:00:01.0: supports D1 D2
248[ 0.238236] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
249[ 0.238344] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
250[ 0.238359] pci 0000:00:01.1: reg 0x10: [mem 0xf0a60000-0xf0a63fff 64bit]
251[ 0.238427] pci 0000:00:01.1: supports D1 D2
252[ 0.238526] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
253[ 0.238650] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
254[ 0.238728] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
255[ 0.238799] pci 0000:00:02.3: System wakeup disabled by ACPI
256[ 0.238875] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
257[ 0.238896] pci 0000:00:10.0: reg 0x10: [mem 0xf0a68000-0xf0a69fff 64bit]
258[ 0.238992] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
259[ 0.239067] pci 0000:00:10.0: System wakeup disabled by ACPI
260[ 0.239127] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
261[ 0.239145] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
262[ 0.239155] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
263[ 0.239165] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
264[ 0.239175] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
265[ 0.239185] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
266[ 0.239195] pci 0000:00:11.0: reg 0x24: [mem 0xf0a6c000-0xf0a6c3ff]
267[ 0.239236] pci 0000:00:11.0: PME# supported from D3hot
268[ 0.239340] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
269[ 0.239359] pci 0000:00:12.0: reg 0x10: [mem 0xf0a6a000-0xf0a6afff]
270[ 0.239491] pci 0000:00:12.0: System wakeup disabled by ACPI
271[ 0.239545] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
272[ 0.239565] pci 0000:00:12.2: reg 0x10: [mem 0xf0a6c400-0xf0a6c4ff]
273[ 0.239645] pci 0000:00:12.2: supports D1 D2
274[ 0.239648] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
275[ 0.239720] pci 0000:00:12.2: System wakeup disabled by ACPI
276[ 0.239776] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
277[ 0.239794] pci 0000:00:13.0: reg 0x10: [mem 0xf0a6b000-0xf0a6bfff]
278[ 0.239927] pci 0000:00:13.0: System wakeup disabled by ACPI
279[ 0.239986] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
280[ 0.240006] pci 0000:00:13.2: reg 0x10: [mem 0xf0a6c500-0xf0a6c5ff]
281[ 0.240086] pci 0000:00:13.2: supports D1 D2
282[ 0.240089] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
283[ 0.240154] pci 0000:00:13.2: System wakeup disabled by ACPI
284[ 0.240206] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
285[ 0.240356] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
286[ 0.240378] pci 0000:00:14.2: reg 0x10: [mem 0xf0a64000-0xf0a67fff 64bit]
287[ 0.240446] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
288[ 0.240544] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
289[ 0.240693] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
290[ 0.240711] pci 0000:00:14.7: reg 0x10: [mem 0xf0a6c600-0xf0a6c6ff 64bit]
291[ 0.240841] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
292[ 0.240942] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
293[ 0.241043] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
294[ 0.241142] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
295[ 0.241247] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
296[ 0.241347] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
297[ 0.241536] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
298[ 0.241554] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
299[ 0.241584] pci 0000:01:00.0: reg 0x18: [mem 0xf0804000-0xf0804fff 64bit pref]
300[ 0.241603] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
301[ 0.241679] pci 0000:01:00.0: supports D1 D2
302[ 0.241682] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
303[ 0.241764] pci 0000:01:00.1: [10ec:816a] type 00 class 0x070002
304[ 0.241783] pci 0000:01:00.1: reg 0x10: [io 0x1400-0x14ff]
305[ 0.241811] pci 0000:01:00.1: reg 0x18: [mem 0xf090c000-0xf090cfff 64bit]
306[ 0.241830] pci 0000:01:00.1: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit]
307[ 0.241906] pci 0000:01:00.1: supports D1 D2
308[ 0.241909] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.241988] pci 0000:01:00.2: [10ec:816b] type 00 class 0x070002
310[ 0.242006] pci 0000:01:00.2: reg 0x10: [io 0x1800-0x18ff]
311[ 0.242035] pci 0000:01:00.2: reg 0x18: [mem 0xf090d000-0xf090dfff 64bit]
312[ 0.242053] pci 0000:01:00.2: reg 0x20: [mem 0xf0904000-0xf0907fff 64bit]
313[ 0.242129] pci 0000:01:00.2: supports D1 D2
314[ 0.242132] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
315[ 0.242210] pci 0000:01:00.3: [10ec:816c] type 00 class 0x0c0701
316[ 0.242229] pci 0000:01:00.3: reg 0x10: [io 0x1c00-0x1cff]
317[ 0.242257] pci 0000:01:00.3: reg 0x18: [mem 0xf090e000-0xf090e0ff 64bit]
318[ 0.242276] pci 0000:01:00.3: reg 0x20: [mem 0xf0908000-0xf090bfff 64bit]
319[ 0.242352] pci 0000:01:00.3: supports D1 D2
320[ 0.242355] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
321[ 0.247729] pci 0000:00:02.3: PCI bridge to [bus 01]
322[ 0.247737] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
323[ 0.247742] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
324[ 0.247749] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
325[ 0.247933] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
326[ 0.248017] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15)
327[ 0.248099] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
328[ 0.248179] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
329[ 0.248259] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
330[ 0.248339] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
331[ 0.248415] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
332[ 0.248495] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
333[ 0.248769] ACPI: Enabled 5 GPEs in block 00 to 1F
334[ 0.248780] ACPI: \_SB_.PCI0: notify handler is installed
335[ 0.248815] Found 1 acpi root devices
336[ 0.248968] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
337[ 0.248975] vgaarb: loaded
338[ 0.248976] vgaarb: bridge control possible 0000:00:01.0
339[ 0.249271] SCSI subsystem initialized
340[ 0.249275] ACPI: bus type ATA registered
341[ 0.249353] libata version 3.00 loaded.
342[ 0.249378] ACPI: bus type USB registered
343[ 0.249404] usbcore: registered new interface driver usbfs
344[ 0.249420] usbcore: registered new interface driver hub
345[ 0.249459] usbcore: registered new device driver usb
346[ 0.249638] PCI: Using ACPI for IRQ routing
347[ 0.249642] PCI: pci_cache_line_size set to 64 bytes
348[ 0.249703] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
349[ 0.249706] e820: reserve RAM buffer [mem 0xbf10f000-0xbfffffff]
350[ 0.249846] NetLabel: Initializing
351[ 0.249849] NetLabel: domain hash size = 128
352[ 0.249851] NetLabel: protocols = UNLABELED CIPSOv4
353[ 0.249867] NetLabel: unlabeled traffic allowed by default
354[ 0.249970] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
355[ 0.249976] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
356[ 0.252029] Switched to clocksource hpet
357[ 0.259906] AppArmor: AppArmor Filesystem Enabled
358[ 0.259958] pnp: PnP ACPI init
359[ 0.259988] ACPI: bus type PNP registered
360[ 0.260255] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
361[ 0.260262] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
362[ 0.260316] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
363[ 0.260358] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
364[ 0.260377] pnp 00:03: [dma 4]
365[ 0.260411] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
366[ 0.260456] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
367[ 0.260641] pnp: PnP ACPI: found 5 devices
368[ 0.260644] ACPI: bus type PNP unregistered
369[ 0.268259] pci 0000:00:02.3: PCI bridge to [bus 01]
370[ 0.268265] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
371[ 0.268271] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
372[ 0.268277] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
373[ 0.268378] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
374[ 0.268382] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
375[ 0.268385] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
376[ 0.268389] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
377[ 0.268392] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
378[ 0.268395] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
379[ 0.268399] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
380[ 0.268402] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
381[ 0.268453] NET: Registered protocol family 2
382[ 0.268725] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
383[ 0.268940] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
384[ 0.269091] TCP: Hash tables configured (established 32768 bind 32768)
385[ 0.269139] TCP: reno registered
386[ 0.269153] UDP hash table entries: 2048 (order: 4, 65536 bytes)
387[ 0.269183] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
388[ 0.269296] NET: Registered protocol family 1
389[ 0.269317] pci 0000:00:01.0: Boot video device
390[ 0.324593] PCI: CLS 64 bytes, default 64
391[ 0.324669] Trying to unpack rootfs image as initramfs...
392[ 0.753911] Freeing initrd memory: 17036K (ffff880035eaa000 - ffff880036f4d000)
393[ 0.753923] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
394[ 0.753927] software IO TLB [mem 0xbb10f000-0xbf10f000] (64MB) mapped at [ffff8800bb10f000-ffff8800bf10efff]
395[ 0.754182] perf: AMD NB counters detected
396[ 0.754191] perf: AMD L2I counters detected
397[ 0.754216] LVT offset 0 assigned for vector 0x400
398[ 0.754250] perf: AMD IBS detected (0x000000ff)
399[ 0.754304] Scanning for low memory corruption every 60 seconds
400[ 0.754750] Initialise module verification
401[ 0.754821] audit: initializing netlink socket (disabled)
402[ 0.754839] type=2000 audit(1395254486.644:1): initialized
403[ 0.797625] bounce pool size: 64 pages
404[ 0.797640] HugeTLB registered 2 MB page size, pre-allocated 0 pages
405[ 0.799532] zbud: loaded
406[ 0.799710] VFS: Disk quotas dquot_6.5.2
407[ 0.799775] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
408[ 0.800553] fuse init (API version 7.22)
409[ 0.800678] msgmni has been set to 6479
410[ 0.801370] Key type asymmetric registered
411[ 0.801374] Asymmetric key parser 'x509' registered
412[ 0.801444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
413[ 0.801506] io scheduler noop registered
414[ 0.801510] io scheduler deadline registered (default)
415[ 0.801560] io scheduler cfq registered
416[ 0.801746] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X
417[ 0.801858] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
418[ 0.801863] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
419[ 0.801866] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
420[ 0.801869] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
421[ 0.801872] pci 0000:01:00.3: Signaling PME through PCIe PME interrupt
422[ 0.801877] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
423[ 0.801897] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
424[ 0.801919] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
425[ 0.802092] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
426[ 0.802100] ACPI: Power Button [PWRB]
427[ 0.802159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
428[ 0.802163] ACPI: Power Button [PWRF]
429[ 0.802248] ACPI: acpi_idle registered with cpuidle
430[ 0.802543] GHES: Failed to enable APEI firmware first mode.
431[ 0.802647] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
432[ 0.823372] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
433[ 0.825651] Linux agpgart interface v0.103
434[ 0.827588] brd: module loaded
435[ 0.828722] loop: module loaded
436[ 0.829278] libphy: Fixed MDIO Bus: probed
437[ 0.829412] tun: Universal TUN/TAP device driver, 1.6
438[ 0.829414] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
439[ 0.829479] PPP generic driver version 2.4.2
440[ 0.829535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
441[ 0.829538] ehci-pci: EHCI PCI platform driver
442[ 0.829670] ehci-pci 0000:00:12.2: EHCI Host Controller
443[ 0.829680] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
444[ 0.829690] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
445[ 0.829703] ehci-pci 0000:00:12.2: debug port 1
446[ 0.829757] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0a6c400
447[ 0.840130] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
448[ 0.840161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
449[ 0.840164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
450[ 0.840167] usb usb1: Product: EHCI Host Controller
451[ 0.840170] usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
452[ 0.840173] usb usb1: SerialNumber: 0000:00:12.2
453[ 0.840308] hub 1-0:1.0: USB hub found
454[ 0.840316] hub 1-0:1.0: 4 ports detected
455[ 0.840524] ehci-pci 0000:00:13.2: EHCI Host Controller
456[ 0.840532] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
457[ 0.840538] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
458[ 0.840550] ehci-pci 0000:00:13.2: debug port 1
459[ 0.840576] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0a6c500
460[ 0.852142] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
461[ 0.852163] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
462[ 0.852167] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
463[ 0.852169] usb usb2: Product: EHCI Host Controller
464[ 0.852172] usb usb2: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
465[ 0.852175] usb usb2: SerialNumber: 0000:00:13.2
466[ 0.852293] hub 2-0:1.0: USB hub found
467[ 0.852299] hub 2-0:1.0: 4 ports detected
468[ 0.852423] ehci-platform: EHCI generic platform driver
469[ 0.852434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
470[ 0.852436] ohci-platform: OHCI generic platform driver
471[ 0.852445] uhci_hcd: USB Universal Host Controller Interface driver
472[ 0.852561] xhci_hcd 0000:00:10.0: xHCI Host Controller
473[ 0.852569] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
474[ 0.852786] xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
475[ 0.852797] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
476[ 0.852807] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
477[ 0.852816] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
478[ 0.852826] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
479[ 0.852936] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
480[ 0.852940] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
481[ 0.852943] usb usb3: Product: xHCI Host Controller
482[ 0.852945] usb usb3: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
483[ 0.852948] usb usb3: SerialNumber: 0000:00:10.0
484[ 0.853034] xHCI xhci_add_endpoint called for root hub
485[ 0.853037] xHCI xhci_check_bandwidth called for root hub
486[ 0.853068] hub 3-0:1.0: USB hub found
487[ 0.853076] hub 3-0:1.0: 2 ports detected
488[ 0.853165] xhci_hcd 0000:00:10.0: xHCI Host Controller
489[ 0.853170] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
490[ 0.856155] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
491[ 0.856158] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
492[ 0.856161] usb usb4: Product: xHCI Host Controller
493[ 0.856164] usb usb4: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
494[ 0.856167] usb usb4: SerialNumber: 0000:00:10.0
495[ 0.856261] xHCI xhci_add_endpoint called for root hub
496[ 0.856264] xHCI xhci_check_bandwidth called for root hub
497[ 0.856293] hub 4-0:1.0: USB hub found
498[ 0.856301] hub 4-0:1.0: 2 ports detected
499[ 0.864202] i8042: PNP: No PS/2 controller found. Probing ports directly.
500[ 1.752267] tsc: Refined TSC clocksource calibration: 1996.384 MHz
501[ 1.882266] i8042: No controller found
502[ 1.882388] mousedev: PS/2 mouse device common for all mice
503[ 1.882556] rtc_cmos 00:01: RTC can wake from S4
504[ 1.882693] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
505[ 1.882719] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
506[ 1.882810] device-mapper: uevent: version 1.0.3
507[ 1.882899] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
508[ 1.882982] cpuidle: using governor ladder
509[ 1.883079] cpuidle: using governor menu
510[ 1.883095] ledtrig-cpu: registered to indicate activity on CPUs
511[ 1.883227] TCP: cubic registered
512[ 1.883363] NET: Registered protocol family 10
513[ 1.883652] NET: Registered protocol family 17
514[ 1.883666] Key type dns_resolver registered
515[ 1.884064] PM: Hibernation image not present or could not be loaded.
516[ 1.884070] Loading module verification certificates
517[ 1.885700] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f27c94f79b8e017f1b6771433b38db3e1a5f77e1'
518[ 1.885720] registered taskstats version 1
519[ 1.889308] Key type trusted registered
520[ 1.892154] Key type encrypted registered
521[ 1.894947] AppArmor: AppArmor sha1 policy hashing enabled
522[ 1.895405] Magic number: 6:451:696
523[ 1.895552] rtc_cmos 00:01: setting system clock to 2014-03-19 18:41:28 UTC (1395254488)
524[ 1.895750] acpi-cpufreq: overriding BIOS provided _PSD data
525[ 1.896003] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
526[ 1.896005] EDD information not available.
527[ 1.898004] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
528[ 1.898009] Write protecting the kernel read-only data: 12288k
529[ 1.902401] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
530[ 1.905670] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
531[ 1.921577] systemd-udevd[114]: starting version 204
532[ 1.942943] r8168: module verification failed: signature and/or required key missing - tainting kernel
533[ 1.943431] r8168 Gigabit Ethernet driver 8.038.00-NAPI loaded
534[ 1.943611] r8168 0000:01:00.0: irq 78 for MSI/MSI-X
535[ 1.948166] sdhci: Secure Digital Host Controller Interface driver
536[ 1.948172] sdhci: Copyright(c) Pierre Ossman
537[ 1.950515] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
538[ 1.950675] mmc0: no vqmmc regulator found
539[ 1.950678] mmc0: no vmmc regulator found
540[ 1.950798] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
541[ 1.951247] ahci 0000:00:11.0: version 3.0
542[ 1.951388] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
543[ 1.951394] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio deso sadm sds
544[ 1.953298] scsi0 : ahci
545[ 1.955125] scsi1 : ahci
546[ 1.955205] ata1: SATA max UDMA/133 abar m1024@0xf0a6c000 port 0xf0a6c100 irq 19
547[ 1.955209] ata2: SATA max UDMA/133 abar m1024@0xf0a6c000 port 0xf0a6c180 irq 19
548[ 1.968626] eth%d: 0xffffc9000074e000, 00:00:1a:1b:34:2c, IRQ 78
549[ 1.969743] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
550[ 1.969755] r8168 Copyright (C) 2013 Realtek NIC software team <nicfae@realtek.com>
551[ 1.969755] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
552[ 1.969755] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
553[ 2.272377] ata1: SATA link down (SStatus 0 SControl 300)
554[ 2.444371] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
555[ 2.445543] ata2.00: ATA-8: ST3750525AS, JC45, max UDMA/133
556[ 2.445547] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
557[ 2.446921] ata2.00: configured for UDMA/133
558[ 2.447124] scsi 1:0:0:0: Direct-Access ATA ST3750525AS JC45 PQ: 0 ANSI: 5
559[ 2.447343] sd 1:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
560[ 2.447388] sd 1:0:0:0: Attached scsi generic sg0 type 0
561[ 2.447494] sd 1:0:0:0: [sda] Write Protect is off
562[ 2.447499] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
563[ 2.447559] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
564[ 2.480371] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
565[ 2.481147] sd 1:0:0:0: [sda] Attached SCSI disk
566[ 2.752500] Switched to clocksource tsc
567[ 3.388043] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
568[ 9.365728] Adding 1757180k swap on /dev/sda6. Priority:-1 extents:1 across:1757180k FS
569[ 9.397803] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
570[ 9.471425] systemd-udevd[285]: starting version 204
571[ 9.538948] lp: driver loaded but no devices found
572[ 9.568139] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
573[ 9.568146] AMD IOMMUv2 functionality not available on this system
574[ 9.580119] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
575[ 9.580127] Disabling lock debugging due to kernel taint
576[ 9.585520] ohci-pci: OHCI PCI platform driver
577[ 9.585801] ohci-pci 0000:00:12.0: OHCI PCI host controller
578[ 9.585821] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
579[ 9.585893] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0a6a000
580[ 9.607524] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3093 MBytes.
581[ 9.607547] <6>[fglrx] vendor: 1002 device: 9830 count: 1
582[ 9.609030] <6>[fglrx] ioport: bar 4, base 0x2000, size: 0x100
583[ 9.614475] <6>[fglrx] Kernel PAT support is enabled
584[ 9.614510] <6>[fglrx] module loaded - fglrx 13.30.1 [Nov 12 2013] with 1 minors
585[ 9.625179] MCE: In-kernel MCE decoding enabled.
586[ 9.632806] microcode: CPU0: patch_level=0x0700010b
587[ 9.645414] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
588[ 9.645422] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
589[ 9.645425] usb usb5: Product: OHCI PCI host controller
590[ 9.645429] usb usb5: Manufacturer: Linux 3.11.0-13-generic ohci_hcd
591[ 9.645432] usb usb5: SerialNumber: 0000:00:12.0
592[ 9.645613] hub 5-0:1.0: USB hub found
593[ 9.645624] hub 5-0:1.0: 4 ports detected
594[ 9.645805] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
595[ 9.646989] ohci-pci 0000:00:13.0: OHCI PCI host controller
596[ 9.647004] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
597[ 9.647031] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0a6b000
598[ 9.705426] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
599[ 9.705435] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
600[ 9.705439] usb usb6: Product: OHCI PCI host controller
601[ 9.705442] usb usb6: Manufacturer: Linux 3.11.0-13-generic ohci_hcd
602[ 9.705445] usb usb6: SerialNumber: 0000:00:13.0
603[ 9.705648] hub 6-0:1.0: USB hub found
604[ 9.705659] hub 6-0:1.0: 4 ports detected
605[ 9.706113] hda-intel 0000:00:01.1: Using LPIB position fix
606[ 9.706160] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X
607[ 9.707037] EDAC MC: Ver: 3.0.0
608[ 9.708533] hda-intel 0000:00:01.1: Enable sync_write for stable communication
609[ 9.714272] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
610[ 9.714401] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
611[ 9.714832] hda-intel 0000:00:14.2: Using LPIB position fix
612[ 9.714880] snd_hda_intel 0000:00:14.2: irq 80 for MSI/MSI-X
613[ 9.719301] hda-intel 0000:00:14.2: Enable sync_write for stable communication
614[ 9.719850] AMD64 EDAC driver v3.4.0
615[ 9.728899] SKU: Nid=0x1d sku_cfg=0x40130605
616[ 9.728907] SKU: port_connectivity=0x1
617[ 9.728909] SKU: enable_pcbeep=0x1
618[ 9.728911] SKU: check_sum=0x00000003
619[ 9.728913] SKU: customization=0x00000006
620[ 9.728915] SKU: external_amp=0x0
621[ 9.728916] SKU: platform_type=0x1
622[ 9.728918] SKU: swap=0x0
623[ 9.728919] SKU: override=0x1
624[ 9.729118] autoconfig: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
625[ 9.729120] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
626[ 9.729123] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
627[ 9.729124] mono: mono_out=0x0
628[ 9.729126] dig-out=0x1e/0x0
629[ 9.729127] inputs:
630[ 9.729133] Mic=0x18
631[ 9.729135] Line=0x1a
632[ 9.729137] realtek: No valid SSID, checking pincfg 0x40130605 for NID 0x1d
633[ 9.729139] realtek: Enabling init ASM_ID=0x0605 CODEC_ID=10ec0272
634[ 9.739419] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
635[ 9.739545] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
636[ 9.739648] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
637[ 9.740081] EDAC amd64: DRAM ECC enabled.
638[ 9.740094] EDAC amd64: F16h detected (node 0).
639[ 9.740130] EDAC MC: DCT0 chip selects:
640[ 9.740133] EDAC amd64: MC: 0: 0MB 1: 0MB
641[ 9.740136] EDAC amd64: MC: 2: 2048MB 3: 2048MB
642[ 9.740138] EDAC amd64: MC: 4: 0MB 5: 0MB
643[ 9.740140] EDAC amd64: MC: 6: 0MB 7: 0MB
644[ 9.740142] EDAC MC: DCT1 chip selects:
645[ 9.740144] EDAC amd64: MC: 0: 0MB 1: 0MB
646[ 9.740146] EDAC amd64: MC: 2: 0MB 3: 0MB
647[ 9.740148] EDAC amd64: MC: 4: 0MB 5: 0MB
648[ 9.740150] EDAC amd64: MC: 6: 0MB 7: 0MB
649[ 9.740152] EDAC amd64: using x4 syndromes.
650[ 9.740154] EDAC amd64: MCT channel count: 1
651[ 9.740198] EDAC amd64: CS2: Unbuffered DDR3 RAM
652[ 9.740201] EDAC amd64: CS3: Unbuffered DDR3 RAM
653[ 9.740352] EDAC MC0: Giving out device to 'amd64_edac' 'F16h': DEV 0000:00:18.2
654[ 9.740392] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
655[ 9.767428] type=1400 audit(1395268896.365:2): apparmor="STATUS" operation="profile_load" parent=325 profile="unconfined" name="/sbin/dhclient" pid=355 comm="apparmor_parser"
656[ 9.767441] type=1400 audit(1395268896.365:3): apparmor="STATUS" operation="profile_load" parent=325 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
657[ 9.767450] type=1400 audit(1395268896.365:4): apparmor="STATUS" operation="profile_load" parent=325 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
658[ 9.768371] type=1400 audit(1395268896.365:5): apparmor="STATUS" operation="profile_replace" parent=325 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
659[ 9.768384] type=1400 audit(1395268896.365:6): apparmor="STATUS" operation="profile_replace" parent=325 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
660[ 9.768928] type=1400 audit(1395268896.365:7): apparmor="STATUS" operation="profile_replace" parent=325 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
661[ 9.869210] microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
662[ 9.869236] microcode: CPU1: patch_level=0x0700010b
663[ 9.869249] microcode: CPU2: patch_level=0x0700010b
664[ 9.869258] microcode: CPU3: patch_level=0x0700010b
665[ 9.869461] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
666[ 9.944424] kvm: Nested Virtualization enabled
667[ 9.944433] kvm: Nested Paging enabled
668[ 10.213458] usb 5-3: new full-speed USB device number 2 using ohci-pci
669[ 10.386538] usb 5-3: New USB device found, idVendor=046d, idProduct=c52e
670[ 10.386542] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
671[ 10.386546] usb 5-3: Product: USB Receiver
672[ 10.386550] usb 5-3: Manufacturer: Logitech
673[ 10.503631] hidraw: raw HID events driver (C) Jiri Kosina
674[ 10.514623] usbcore: registered new interface driver usbhid
675[ 10.514629] usbhid: USB HID core driver
676[ 10.518272] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.0/input/input7
677[ 10.518988] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
678[ 10.519546] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.1/input/input8
679[ 10.519818] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
680[ 10.803391] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
681[ 11.179051] init: failsafe main process (564) killed by TERM signal
682[ 11.501265] Bluetooth: Core ver 2.16
683[ 11.501301] NET: Registered protocol family 31
684[ 11.501304] Bluetooth: HCI device and connection manager initialized
685[ 11.501319] Bluetooth: HCI socket layer initialized
686[ 11.501323] Bluetooth: L2CAP socket layer initialized
687[ 11.501332] Bluetooth: SCO socket layer initialized
688[ 11.506485] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
689[ 11.506492] Bluetooth: BNEP filters: protocol multicast
690[ 11.506506] Bluetooth: BNEP socket layer initialized
691[ 11.508058] Bluetooth: RFCOMM TTY layer initialized
692[ 11.508080] Bluetooth: RFCOMM socket layer initialized
693[ 11.508083] Bluetooth: RFCOMM ver 1.11
694[ 11.667194] type=1400 audit(1395268898.265:8): apparmor="STATUS" operation="profile_load" parent=664 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=669 comm="apparmor_parser"
695[ 11.667210] type=1400 audit(1395268898.265:9): apparmor="STATUS" operation="profile_load" parent=664 profile="unconfined" name="chromium_browser" pid=669 comm="apparmor_parser"
696[ 11.667250] type=1400 audit(1395268898.265:10): apparmor="STATUS" operation="profile_load" parent=664 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=670 comm="apparmor_parser"
697[ 11.667261] type=1400 audit(1395268898.265:11): apparmor="STATUS" operation="profile_load" parent=664 profile="unconfined" name="chromium_browser" pid=670 comm="apparmor_parser"
698[ 11.756401] init: avahi-cups-reload main process (680) terminated with status 1
699[ 11.777508] ppdev: user-space parallel port driver
700[ 12.605128] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
701[ 12.605585] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
702[ 12.960854] init: plymouth-stop pre-start process (1014) terminated with status 1
703[ 13.046737] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
704[ 13.046745] vesafb: scrolling: redraw
705[ 13.046749] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
706[ 13.047696] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001200000, using 9024k, total 9024k
707[ 13.048274] Console: switching to colour frame buffer device 240x75
708[ 13.059647] fb0: VESA VGA frame buffer device
709[ 13.119925] init: plymouth-splash main process (1041) terminated with status 1
710[ 13.691184] fglrx_pci 0000:00:01.0: irq 81 for MSI/MSI-X
711[ 13.692813] <6>[fglrx] Firegl kernel thread PID: 1051
712[ 13.692950] <6>[fglrx] Firegl kernel thread PID: 1052
713[ 13.693080] <6>[fglrx] Firegl kernel thread PID: 1053
714[ 13.693254] <6>[fglrx] IRQ 81 Enabled
715[ 13.704105] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
716[ 13.704109] <6>[fglrx] Reserved FB block: Unshared offset:fc69000, size:3000
717[ 13.704112] <6>[fglrx] Reserved FB block: Unshared offset:fc6c000, size:394000
718[ 13.704115] <6>[fglrx] Reserved FB block: Unshared offset:1ffc8000, size:38000
719[ 151.621891] r8168: eth7: link up
720[ 151.621961] IPv6: ADDRCONF(NETDEV_CHANGE): eth7: link becomes ready