| <5>Linux version 5.14.9 (coreboot@reproducible) (gcc (Ubuntu 10.3.0-1ubuntu1) 10.3.0, GNU ld (GNU Binutils for Ubuntu) 2.36.1) #0 PREEMPT Wed Sep 29 19:06:54 2021 |
| <6>Command line: |
| <6>x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| <6>x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| <6>x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| <6>x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' |
| <6>x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' |
| <6>x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| <6>x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 |
| <6>x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 |
| <6>x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. |
| <6>signal: max sigframe size: 1616 |
| <6>BIOS-provided physical RAM map: |
| <6>BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved |
| <6>BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| <6>BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| <6>BIOS-e820: [mem 0x0000000000100000-0x0000000099a39fff] usable |
| <6>BIOS-e820: [mem 0x0000000099a3a000-0x000000009f7fffff] reserved |
| <6>BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved |
| <6>BIOS-e820: [mem 0x00000000fc000000-0x00000000fc000fff] reserved |
| <6>BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved |
| <6>BIOS-e820: [mem 0x00000000fed10000-0x00000000fed17fff] reserved |
| <6>BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| <6>BIOS-e820: [mem 0x00000000fed80000-0x00000000fed83fff] reserved |
| <6>BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| <6>BIOS-e820: [mem 0x00000000feda0000-0x00000000feda1fff] reserved |
| <6>BIOS-e820: [mem 0x0000000100000000-0x000000085e7fffff] usable |
| <6>NX (Execute Disable) protection: active |
| <6>tsc: Detected 2300.000 MHz processor |
| <6>tsc: Detected 2299.968 MHz TSC |
| <7>e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| <7>e820: remove [mem 0x000a0000-0x000fffff] usable |
| <6>last_pfn = 0x85e800 max_arch_pfn = 0x400000000 |
| <6>x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC |
| <6>last_pfn = 0x99a3a max_arch_pfn = 0x400000000 |
| <6>Using GB pages for direct mapping |
| <6>RAMDISK: [mem 0x04000000-0x042e6fff] |
| <6>ACPI: Early table checksum verification disabled |
| <6>ACPI: RSDP 0x00000000000F0000 000024 (v02 COREv4) |
| <6>ACPI: XSDT 0x0000000099A4B0E0 00006C (v01 COREv4 COREBOOT 00000000 CORE 20210331) |
| <6>ACPI: FACP 0x0000000099A4E770 000114 (v06 COREv4 COREBOOT 00000000 CORE 20210331) |
| <6>ACPI: DSDT 0x0000000099A4B280 0034E1 (v02 COREv4 COREBOOT 20110725 INTL 20210331) |
| <6>ACPI: FACS 0x0000000099A4B240 000040 |
| <6>ACPI: FACS 0x0000000099A4B240 000040 |
| <6>ACPI: SSDT 0x0000000099A4E890 001E8F (v02 COREv4 COREBOOT 0000002A CORE 20210331) |
| <6>ACPI: MCFG 0x0000000099A50720 00003C (v01 COREv4 COREBOOT 00000000 CORE 20210331) |
| <6>ACPI: TPM2 0x0000000099A50760 00004C (v04 COREv4 COREBOOT 00000000 CORE 20210331) |
| <6>ACPI: LPIT 0x0000000099A507B0 000094 (v00 COREv4 COREBOOT 0000002A CORE 20210331) |
| <6>ACPI: APIC 0x0000000099A50850 000092 (v03 COREv4 COREBOOT 00000000 CORE 20210331) |
| <6>ACPI: DMAR 0x0000000099A508F0 000088 (v01 COREv4 COREBOOT 00000000 CORE 20210331) |
| <6>ACPI: DBG2 0x0000000099A50980 000054 (v00 COREv4 COREBOOT 00000000 CORE 20210331) |
| <6>ACPI: HPET 0x0000000099A509E0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20210331) |
| <6>ACPI: Reserving FACP table memory at [mem 0x99a4e770-0x99a4e883] |
| <6>ACPI: Reserving DSDT table memory at [mem 0x99a4b280-0x99a4e760] |
| <6>ACPI: Reserving FACS table memory at [mem 0x99a4b240-0x99a4b27f] |
| <6>ACPI: Reserving FACS table memory at [mem 0x99a4b240-0x99a4b27f] |
| <6>ACPI: Reserving SSDT table memory at [mem 0x99a4e890-0x99a5071e] |
| <6>ACPI: Reserving MCFG table memory at [mem 0x99a50720-0x99a5075b] |
| <6>ACPI: Reserving TPM2 table memory at [mem 0x99a50760-0x99a507ab] |
| <6>ACPI: Reserving LPIT table memory at [mem 0x99a507b0-0x99a50843] |
| <6>ACPI: Reserving APIC table memory at [mem 0x99a50850-0x99a508e1] |
| <6>ACPI: Reserving DMAR table memory at [mem 0x99a508f0-0x99a50977] |
| <6>ACPI: Reserving DBG2 table memory at [mem 0x99a50980-0x99a509d3] |
| <6>ACPI: Reserving HPET table memory at [mem 0x99a509e0-0x99a50a17] |
| <6>Zone ranges: |
| <6> DMA32 [mem 0x0000000000001000-0x00000000ffffffff] |
| <6> Normal [mem 0x0000000100000000-0x000000085e7fffff] |
| <6>Movable zone start for each node |
| <6>Early memory node ranges |
| <6> node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| <6> node 0: [mem 0x0000000000100000-0x0000000099a39fff] |
| <6> node 0: [mem 0x0000000100000000-0x000000085e7fffff] |
| <6>Initmem setup node 0 [mem 0x0000000000001000-0x000000085e7fffff] |
| <6>On node 0, zone DMA32: 1 pages in unavailable ranges |
| <6>On node 0, zone DMA32: 96 pages in unavailable ranges |
| <6>On node 0, zone Normal: 26054 pages in unavailable ranges |
| <6>On node 0, zone Normal: 6144 pages in unavailable ranges |
| <6>Reserving Intel graphics memory at [mem 0x9b800000-0x9f7fffff] |
| <4>APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. |
| <4>APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 2/0x2 ignored. |
| <4>APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 3/0x3 ignored. |
| <4>APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 4/0x4 ignored. |
| <4>APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 5/0x5 ignored. |
| <4>APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 6/0x6 ignored. |
| <4>APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 7/0x7 ignored. |
| <6>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) |
| <6>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 |
| <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| <6>ACPI: Using ACPI (MADT) for SMP configuration information |
| <6>ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| <6>TSC deadline timer available |
| <6>[mem 0x9f800000-0xdfffffff] available for PCI devices |
| <6>clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 |
| <7>pcpu-alloc: [0] 0 |
| <6>Built 1 zonelists, mobility grouping on. Total pages: 8225586 |
| <5>Kernel command line: |
| <6>Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) |
| <6>Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| <6>mem auto-init: stack:off, heap alloc:off, heap free:off |
| <6>Memory: 32767176K/33425252K available (8194K kernel code, 1030K rwdata, 888K rodata, 640K init, 372K bss, 657820K reserved, 0K cma-reserved) |
| <6>rcu: Preemptible hierarchical RCU implementation. |
| <6>rcu: RCU event tracing is enabled. |
| <6> Trampoline variant of Tasks RCU enabled. |
| <6> Tracing variant of Tasks RCU enabled. |
| <6>rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| <6>NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16 |
| <5>random: get_random_bytes called from 0xffffffff81d03efd with crng_init=0 |
| <6>Console: colour dummy device 80x25 |
| <6>printk: console [tty0] enabled |
| <6>ACPI: Core revision 20210604 |
| <6>clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns |
| <6>APIC: Switch to symmetric I/O mode setup |
| <6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| <6>clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212717146a7, max_idle_ns: 440795291431 ns |
| <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.93 BogoMIPS (lpj=9199872) |
| <6>pid_max: default: 4096 minimum: 301 |
| <6>Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) |
| <6>Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) |
| <6>process: using mwait in idle threads |
| <6>Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 |
| <6>Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 |
| <6>CPU: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xc) |
| <6>Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| <6>Spectre V2 : Mitigation: Enhanced IBRS |
| <6>Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| <6>Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| <6>Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| <6>SRBDS: Mitigation: TSX disabled |
| <6>Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. |
| <6>... version: 4 |
| <6>... bit width: 48 |
| <6>... generic registers: 4 |
| <6>... value mask: 0000ffffffffffff |
| <6>... max period: 00007fffffffffff |
| <6>... fixed-purpose events: 3 |
| <6>... event mask: 000000070000000f |
| <6>rcu: Hierarchical SRCU implementation. |
| <6>devtmpfs: initialized |
| <6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| <6>futex hash table entries: 16 (order: -4, 384 bytes, linear) |
| <6>NET: Registered PF_NETLINK/PF_ROUTE protocol family |
| <6>ACPI: bus type PCI registered |
| <6>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) |
| <6>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 |
| <6>PCI: Using configuration type 1 for base access |
| <6>ACPI: Added _OSI(Module Device) |
| <6>ACPI: Added _OSI(Processor Device) |
| <6>ACPI: Added _OSI(3.0 _SCP Extensions) |
| <6>ACPI: Added _OSI(Processor Aggregator Device) |
| <6>ACPI: Added _OSI(Linux-Dell-Video) |
| <6>ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| <6>ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| <6>ACPI: 2 ACPI AML tables successfully acquired and loaded |
| <6>ACPI: EC: EC started |
| <6>ACPI: EC: interrupt blocked |
| <6>ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| <6>ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions |
| <6>ACPI: Interpreter enabled |
| <6>ACPI: PM: (supports S0 S5) |
| <6>ACPI: Using IOAPIC for interrupt routing |
| <6>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| <6>ACPI: Enabled 1 GPEs in block 00 to 7F |
| <6>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| <6>acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| <6>acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] |
| <6>PCI host bridge to bus 0000:00 |
| <6>pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| <6>pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0x85e800000-0x7fffffffff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] |
| <6>pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed47fff window] |
| <6>pci_bus 0000:00: root bus resource [bus 00-ff] |
| <6>pci 0000:00:00.0: [8086:9b61] type 00 class 0x060000 |
| <6>pci 0000:00:02.0: [8086:9b41] type 00 class 0x030000 |
| <6>pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit] |
| <6>pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] |
| <6>pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f] |
| <6>pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 |
| <6>pci 0000:00:04.0: reg 0x10: [mem 0x9fb10000-0x9fb17fff 64bit] |
| <6>pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 |
| <6>pci 0000:00:08.0: reg 0x10: [mem 0x9fb24000-0x9fb24fff 64bit] |
| <6>pci 0000:00:12.0: [8086:02f9] type 00 class 0x118000 |
| <6>pci 0000:00:12.0: reg 0x10: [mem 0x9fb25000-0x9fb25fff 64bit] |
| <6>pci 0000:00:14.0: [8086:02ed] type 00 class 0x0c0330 |
| <6>pci 0000:00:14.0: reg 0x10: [mem 0x9fb00000-0x9fb0ffff 64bit] |
| <6>pci 0000:00:14.0: PME# supported from D3hot D3cold |
| <6>pci 0000:00:14.2: [8086:02ef] type 00 class 0x050000 |
| <6>pci 0000:00:14.2: reg 0x10: [mem 0x9fb20000-0x9fb21fff 64bit] |
| <6>pci 0000:00:14.2: reg 0x18: [mem 0x9fb26000-0x9fb26fff 64bit] |
| <6>pci 0000:00:14.3: [8086:02f0] type 00 class 0x028000 |
| <6>pci 0000:00:14.3: reg 0x10: [mem 0x9fb18000-0x9fb1bfff 64bit] |
| <6>pci 0000:00:14.3: PME# supported from D0 D3hot D3cold |
| <6>pci 0000:00:15.0: [8086:02e8] type 00 class 0x0c8000 |
| <6>pci 0000:00:15.0: reg 0x10: [mem 0x9fb27000-0x9fb27fff 64bit] |
| <6>pci 0000:00:17.0: [8086:02d3] type 00 class 0x010601 |
| <6>pci 0000:00:17.0: reg 0x10: [mem 0x9fb22000-0x9fb23fff] |
| <6>pci 0000:00:17.0: reg 0x14: [mem 0x9fb2b000-0x9fb2b0ff] |
| <6>pci 0000:00:17.0: reg 0x18: [io 0x1060-0x1067] |
| <6>pci 0000:00:17.0: reg 0x1c: [io 0x1068-0x106b] |
| <6>pci 0000:00:17.0: reg 0x20: [io 0x1040-0x105f] |
| <6>pci 0000:00:17.0: reg 0x24: [mem 0x9fb2a000-0x9fb2a7ff] |
| <6>pci 0000:00:17.0: PME# supported from D3hot |
| <6>pci 0000:00:19.0: [8086:02c5] type 00 class 0x0c8000 |
| <6>pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] |
| <6>pci 0000:00:19.2: [8086:02c7] type 00 class 0x078000 |
| <6>pci 0000:00:19.2: reg 0x10: [mem 0xfe032000-0xfe032fff 64bit] |
| <6>pci 0000:00:19.2: reg 0x18: [mem 0x9fb28000-0x9fb28fff 64bit] |
| <6>pci 0000:00:1c.0: [8086:02bc] type 01 class 0x060400 |
| <6>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| <6>pci 0000:00:1d.0: [8086:02b0] type 01 class 0x060400 |
| <6>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| <6>pci 0000:00:1d.1: [8086:02b1] type 01 class 0x060400 |
| <6>pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold |
| <6>pci 0000:00:1d.4: [8086:02b4] type 01 class 0x060400 |
| <6>pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold |
| <6>pci 0000:00:1f.0: [8086:0284] type 00 class 0x060100 |
| <6>pci 0000:00:1f.3: [8086:02c8] type 00 class 0x040300 |
| <6>pci 0000:00:1f.3: reg 0x10: [mem 0x9fb1c000-0x9fb1ffff 64bit] |
| <6>pci 0000:00:1f.3: reg 0x20: [mem 0x9fa00000-0x9fafffff 64bit] |
| <6>pci 0000:00:1f.3: PME# supported from D3hot D3cold |
| <6>pci 0000:00:1f.4: [8086:02a3] type 00 class 0x0c0500 |
| <6>pci 0000:00:1f.4: reg 0x10: [mem 0x9fb2c000-0x9fb2c0ff 64bit] |
| <6>pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] |
| <6>pci 0000:00:1f.5: [8086:02a4] type 00 class 0x0c8000 |
| <6>pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] |
| <6>pci 0000:01:00.0: [8086:15e7] type 01 class 0x060400 |
| <6>pci 0000:01:00.0: enabling Extended Tags |
| <6>pci 0000:01:00.0: supports D1 D2 |
| <6>pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| <6>pci 0000:00:1c.0: PCI bridge to [bus 01-25] |
| <6>pci 0000:00:1c.0: bridge window [io 0x2000-0x3fff] |
| <6>pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd31fffff] |
| <6>pci 0000:00:1c.0: bridge window [mem 0xb1000000-0xd0ffffff 64bit pref] |
| <6>pci 0000:02:00.0: [8086:15e7] type 01 class 0x060400 |
| <6>pci 0000:02:00.0: enabling Extended Tags |
| <6>pci 0000:02:00.0: supports D1 D2 |
| <6>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| <6>pci 0000:02:01.0: [8086:15e7] type 01 class 0x060400 |
| <6>pci 0000:02:01.0: enabling Extended Tags |
| <6>pci 0000:02:01.0: supports D1 D2 |
| <6>pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold |
| <6>pci 0000:02:02.0: [8086:15e7] type 01 class 0x060400 |
| <6>pci 0000:02:02.0: enabling Extended Tags |
| <6>pci 0000:02:02.0: supports D1 D2 |
| <6>pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| <6>pci 0000:01:00.0: PCI bridge to [bus 02-25] |
| <6>pci 0000:01:00.0: bridge window [io 0x2000-0x3fff] |
| <6>pci 0000:01:00.0: bridge window [mem 0xd1000000-0xd31fffff] |
| <6>pci 0000:01:00.0: bridge window [mem 0xb1000000-0xd0ffffff 64bit pref] |
| <6>pci 0000:03:00.0: [8086:15e8] type 00 class 0x088000 |
| <6>pci 0000:03:00.0: reg 0x10: [mem 0xd3000000-0xd303ffff] |
| <6>pci 0000:03:00.0: reg 0x14: [mem 0xd3040000-0xd3040fff] |
| <6>pci 0000:03:00.0: enabling Extended Tags |
| <6>pci 0000:03:00.0: supports D1 D2 |
| <6>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| <6>pci 0000:02:00.0: PCI bridge to [bus 03] |
| <6>pci 0000:02:00.0: bridge window [mem 0xd3000000-0xd30fffff] |
| <6>pci 0000:02:01.0: PCI bridge to [bus 04-24] |
| <6>pci 0000:02:01.0: bridge window [io 0x2000-0x3fff] |
| <6>pci 0000:02:01.0: bridge window [mem 0xd1000000-0xd2ffffff] |
| <6>pci 0000:02:01.0: bridge window [mem 0xb1000000-0xd0ffffff 64bit pref] |
| <6>pci 0000:25:00.0: [8086:15e9] type 00 class 0x0c0330 |
| <6>pci 0000:25:00.0: reg 0x10: [mem 0xd3100000-0xd310ffff] |
| <6>pci 0000:25:00.0: enabling Extended Tags |
| <6>pci 0000:25:00.0: supports D1 D2 |
| <6>pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| <6>pci 0000:25:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) |
| <6>pci 0000:02:02.0: PCI bridge to [bus 25] |
| <6>pci 0000:02:02.0: bridge window [mem 0xd3100000-0xd31fffff] |
| <6>pci 0000:26:00.0: [10ec:5287] type 00 class 0xff0000 |
| <6>pci 0000:26:00.0: reg 0x10: [mem 0x9f814000-0x9f814fff] |
| <6>pci 0000:26:00.0: reg 0x30: [mem 0x9f800000-0x9f80ffff pref] |
| <6>pci 0000:26:00.0: supports D1 D2 |
| <6>pci 0000:26:00.0: PME# supported from D1 D2 D3hot D3cold |
| <6>pci 0000:26:00.1: [10ec:8168] type 00 class 0x020000 |
| <6>pci 0000:26:00.1: reg 0x10: [io 0x4000-0x40ff] |
| <6>pci 0000:26:00.1: reg 0x18: [mem 0x9f815000-0x9f815fff 64bit] |
| <6>pci 0000:26:00.1: reg 0x20: [mem 0x9f810000-0x9f813fff 64bit] |
| <6>pci 0000:26:00.1: supports D1 D2 |
| <6>pci 0000:26:00.1: PME# supported from D0 D1 D2 D3hot D3cold |
| <6>pci 0000:00:1d.0: PCI bridge to [bus 26] |
| <6>pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff] |
| <6>pci 0000:00:1d.0: bridge window [mem 0x9f800000-0x9f8fffff] |
| <6>pci 0000:00:1d.1: PCI bridge to [bus 27] |
| <6>pci 0000:28:00.0: [144d:a808] type 00 class 0x010802 |
| <6>pci 0000:28:00.0: reg 0x10: [mem 0x9f900000-0x9f903fff 64bit] |
| <6>pci 0000:00:1d.4: PCI bridge to [bus 28] |
| <6>pci 0000:00:1d.4: bridge window [mem 0x9f900000-0x9f9fffff] |
| <7>pci_bus 0000:00: on NUMA node 0 |
| <6>ACPI: EC: interrupt unblocked |
| <6>ACPI: EC: event unblocked |
| <6>ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| <6>ACPI: EC: GPE=0x50 |
| <6>ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete |
| <6>ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events |
| <6>pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| <6>pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| <6>pci 0000:00:02.0: vgaarb: bridge control possible |
| <6>vgaarb: loaded |
| <5>SCSI subsystem initialized |
| <7>libata version 3.00 loaded. |
| <6>PCI: Using ACPI for IRQ routing |
| <7>PCI: pci_cache_line_size set to 64 bytes |
| <7>e820: reserve RAM buffer [mem 0x99a3a000-0x9bffffff] |
| <7>e820: reserve RAM buffer [mem 0x85e800000-0x85fffffff] |
| <6>clocksource: Switched to clocksource tsc-early |
| <6>pnp: PnP ACPI init |
| <6>system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| <6>system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| <6>system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| <6>system 00:00: [mem 0xe0000000-0xefffffff] has been reserved |
| <6>system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved |
| <6>system 00:00: [mem 0xff000000-0xffffffff] has been reserved |
| <6>system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved |
| <6>system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved |
| <6>system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| <6>system 00:02: [io 0x1800-0x18fe] has been reserved |
| <6>pnp: PnP ACPI: found 6 devices |
| <6>NET: Registered PF_INET protocol family |
| <6>IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) |
| <6>tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) |
| <6>TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) |
| <6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes, linear) |
| <6>TCP: Hash tables configured (established 262144 bind 65536) |
| <6>UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) |
| <6>UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) |
| <6>pci 0000:00:19.0: BAR 0: assigned [mem 0x85e800000-0x85e800fff 64bit] |
| <6>pci 0000:02:00.0: PCI bridge to [bus 03] |
| <6>pci 0000:02:00.0: bridge window [mem 0xd3000000-0xd30fffff] |
| <6>pci 0000:02:01.0: PCI bridge to [bus 04-24] |
| <6>pci 0000:02:01.0: bridge window [io 0x2000-0x3fff] |
| <6>pci 0000:02:01.0: bridge window [mem 0xd1000000-0xd2ffffff] |
| <6>pci 0000:02:01.0: bridge window [mem 0xb1000000-0xd0ffffff 64bit pref] |
| <6>pci 0000:02:02.0: PCI bridge to [bus 25] |
| <6>pci 0000:02:02.0: bridge window [mem 0xd3100000-0xd31fffff] |
| <6>pci 0000:01:00.0: PCI bridge to [bus 02-25] |
| <6>pci 0000:01:00.0: bridge window [io 0x2000-0x3fff] |
| <6>pci 0000:01:00.0: bridge window [mem 0xd1000000-0xd31fffff] |
| <6>pci 0000:01:00.0: bridge window [mem 0xb1000000-0xd0ffffff 64bit pref] |
| <6>pci 0000:00:1c.0: PCI bridge to [bus 01-25] |
| <6>pci 0000:00:1c.0: bridge window [io 0x2000-0x3fff] |
| <6>pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd31fffff] |
| <6>pci 0000:00:1c.0: bridge window [mem 0xb1000000-0xd0ffffff 64bit pref] |
| <6>pci 0000:00:1d.0: PCI bridge to [bus 26] |
| <6>pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff] |
| <6>pci 0000:00:1d.0: bridge window [mem 0x9f800000-0x9f8fffff] |
| <6>pci 0000:00:1d.1: PCI bridge to [bus 27] |
| <6>pci 0000:00:1d.4: PCI bridge to [bus 28] |
| <6>pci 0000:00:1d.4: bridge window [mem 0x9f900000-0x9f9fffff] |
| <6>pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| <6>pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| <6>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| <6>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| <6>pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| <6>pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| <6>pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| <6>pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| <6>pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| <6>pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| <6>pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| <6>pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| <6>pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| <6>pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| <6>pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| <6>pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| <6>pci_bus 0000:00: resource 20 [mem 0x9f800000-0xdfffffff window] |
| <6>pci_bus 0000:00: resource 21 [mem 0x85e800000-0x7fffffffff window] |
| <6>pci_bus 0000:00: resource 22 [mem 0xfc800000-0xfe7fffff window] |
| <6>pci_bus 0000:00: resource 23 [mem 0xfed40000-0xfed47fff window] |
| <6>pci_bus 0000:01: resource 0 [io 0x2000-0x3fff] |
| <6>pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd31fffff] |
| <6>pci_bus 0000:01: resource 2 [mem 0xb1000000-0xd0ffffff 64bit pref] |
| <6>pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] |
| <6>pci_bus 0000:02: resource 1 [mem 0xd1000000-0xd31fffff] |
| <6>pci_bus 0000:02: resource 2 [mem 0xb1000000-0xd0ffffff 64bit pref] |
| <6>pci_bus 0000:03: resource 1 [mem 0xd3000000-0xd30fffff] |
| <6>pci_bus 0000:04: resource 0 [io 0x2000-0x3fff] |
| <6>pci_bus 0000:04: resource 1 [mem 0xd1000000-0xd2ffffff] |
| <6>pci_bus 0000:04: resource 2 [mem 0xb1000000-0xd0ffffff 64bit pref] |
| <6>pci_bus 0000:25: resource 1 [mem 0xd3100000-0xd31fffff] |
| <6>pci_bus 0000:26: resource 0 [io 0x4000-0x4fff] |
| <6>pci_bus 0000:26: resource 1 [mem 0x9f800000-0x9f8fffff] |
| <6>pci_bus 0000:28: resource 1 [mem 0x9f900000-0x9f9fffff] |
| <6>pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| <6>PCI: CLS 64 bytes, default 64 |
| <6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| <6>software IO TLB: mapped [mem 0x0000000095a3a000-0x0000000099a3a000] (64MB) |
| <6>RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer |
| <6>RAPL PMU: hw unit of domain pp0-core 2^-14 Joules |
| <6>RAPL PMU: hw unit of domain package 2^-14 Joules |
| <6>RAPL PMU: hw unit of domain dram 2^-14 Joules |
| <6>RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules |
| <6>RAPL PMU: hw unit of domain psys 2^-14 Joules |
| <6>Unpacking initramfs... |
| <6>workingset: timestamp_bits=46 max_order=23 bucket_order=0 |
| <6>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| <6>ACPI: button: Power Button [PWRB] |
| <6>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 |
| <6>ACPI: button: Sleep Button [SLPB] |
| <6>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 |
| <6>ACPI: button: Lid Switch [LID0] |
| <6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| <6>ACPI: button: Power Button [PWRF] |
| <6>Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled |
| <6>tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22) |
| <6>Freeing initrd memory: 2972K |
| <6>loop: module loaded |
| <4>intel-lpss 0000:00:15.0: Failed to create debugfs entries |
| <6>intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) |
| <4>intel-lpss 0000:00:19.0: Failed to create debugfs entries |
| <4>intel-lpss 0000:00:19.2: Failed to create debugfs entries |
| <6>dw-apb-uart.2: ttyS4 at MMIO 0xfe032000 (irq = 32, base_baud = 115200) is a 16550A |
| <6>nvme nvme0: pci function 0000:28:00.0 |
| <6>libphy: Fixed MDIO Bus: probed |
| <4>nvme nvme0: missing or invalid SUBNQN field. |
| <6>nvme nvme0: Shutdown timeout set to 8 seconds |
| <6>nvme nvme0: 1/0/0 default/read/poll queues |
| <6> nvme0n1: p1 p2 p3 |
| <6>libphy: r8169: probed |
| <6>r8169 0000:26:00.1 eth0: RTL8411b, 80:fa:5b:74:be:17, XID 5c8, IRQ 129 |
| <6>r8169 0000:26:00.1 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] |
| <6>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| <6>i8042: Detected active multiplexing controller, rev 1.1 |
| <6>serio: i8042 KBD port at 0x60,0x64 irq 1 |
| <6>serio: i8042 AUX0 port at 0x60,0x64 irq 12 |
| <6>serio: i8042 AUX1 port at 0x60,0x64 irq 12 |
| <6>serio: i8042 AUX2 port at 0x60,0x64 irq 12 |
| <6>serio: i8042 AUX3 port at 0x60,0x64 irq 12 |
| <6>device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com |
| <6>sdhci: Secure Digital Host Controller Interface driver |
| <6>sdhci: Copyright(c) Pierre Ossman |
| <6>sdhci-pltfm: SDHCI platform and OF driver helper |
| <6>simple-framebuffer simple-framebuffer.0: framebuffer at 0xa0000000, 0x7e9000 bytes |
| <6>simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680 |
| <6>input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 |
| <6>Console: switching to colour frame buffer device 240x67 |
| <6>simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! |
| <6>NET: Registered PF_INET6 protocol family |
| <6>Segment Routing with IPv6 |
| <6>sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver |
| <6>NET: Registered PF_PACKET protocol family |
| <6>sched_clock: Marking stable (963018164, 5127569)->(970596829, -2451096) |
| <6>Freeing unused kernel image (initmem) memory: 640K |
| <6>Write protecting the kernel read-only data: 12288k |
| <6>Freeing unused kernel image (text/rodata gap) memory: 2044K |
| <6>Freeing unused kernel image (rodata/data gap) memory: 1160K |
| <6>Run /init as init process |
| <7> with arguments: |
| <7> /init |
| <7> with environment: |
| <7> HOME=/ |
| <7> TERM=linux |
| <3>cgroup: Unknown subsys name 'freezer' |
| <14>u-root init [optional]: warning creating mount -t "cgroup" -o freezer "cgroup" "/sys/fs/cgroup/freezer" flags 0x0: invalid argument |
| <3>cgroup: Unknown subsys name 'cpuset' |
| <14>u-root init [optional]: warning creating mount -t "cgroup" -o cpuset "cgroup" "/sys/fs/cgroup/cpuset" flags 0x0: invalid argument |
| <3>cgroup: Unknown subsys name 'net_cls' |
| <14>u-root init [optional]: warning creating mount -t "cgroup" -o net_cls,net_prio "cgroup" "/sys/fs/cgroup/net_cls,net_prio" flags 0x0: invalid argument |
| <3>cgroup: Unknown subsys name 'hugetlb' |
| <14>u-root init [optional]: warning creating mount -t "cgroup" -o hugetlb "cgroup" "/sys/fs/cgroup/hugetlb" flags 0x0: invalid argument |
| <6>tsc: Refined TSC clocksource calibration: 2303.999 MHz |
| <6>clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f6faae8, max_idle_ns: 440795313647 ns |
| <6>clocksource: Switched to clocksource tsc |
| <6>psmouse serio2: synaptics: queried max coordinates: x [..5658], y [..4722] |
| <6>psmouse serio2: synaptics: queried min coordinates: x [1284..], y [1130..] |
| <4>psmouse serio2: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience. |
| <5>random: fast init done |
| <6>psmouse serio2: synaptics: Touchpad model: 1, fw: 9.16, id: 0x1e2a1, caps: 0xf00123/0x840300/0x2e800/0x500000, board id: 3429, fw id: 2840755 |
| <6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10 |
| <4>r8169 0000:26:00.1: Direct firmware load for rtl_nic/rtl8411-2.fw failed with error -2 |
| <3>r8169 0000:26:00.1: Unable to load firmware rtl_nic/rtl8411-2.fw (-2) |
| <6>Generic FE-GE Realtek PHY r8169-0-2601:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2601:00, irq=MAC) |
| <6>r8169 0000:26:00.1 eth0: Link is Down |
| <6>r8169 0000:26:00.1 eth0: Link is Up - 1Gbps/Full - flow control off |
| <6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| <6>r8169 0000:26:00.1 eth0: Link is Down |
| <6>r8169 0000:26:00.1 eth0: Link is Up - 1Gbps/Full - flow control off |
| <5>random: crng init done |