| [ 0.000000] Linux version 4.16.5-gnu-1 (builduser@parabola) (gcc version 7.3.1 20180312 (GCC)) #1 SMP PREEMPT Fri Apr 27 01:32:09 UTC 2018 |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/internal-parabola64 rw quiet console=ttyS0,115200 iomem=relaxed |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfd37fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000dfd38000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: PC Engines APU1/APU1, BIOS 4.7-919-g621abec1e8 04/29/2018 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect |
| [ 0.000000] 1 base 0C0000000 mask FE0000000 write-back |
| [ 0.000000] 2 base 080000000 mask FC0000000 write-back |
| [ 0.000000] 3 base 000000000 mask F80000000 write-back |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 000000011f000000 aka 4592M |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] e820: last_pfn = 0xdfd38 max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f5950-0x000f595f] mapped at [ (ptrval)] |
| [ 0.000000] Scanning 1 areas for low memory corruption |
| [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] BRK [0xae64a000, 0xae64afff] PGTABLE |
| [ 0.000000] BRK [0xae64b000, 0xae64bfff] PGTABLE |
| [ 0.000000] BRK [0xae64c000, 0xae64cfff] PGTABLE |
| [ 0.000000] BRK [0xae64d000, 0xae64dfff] PGTABLE |
| [ 0.000000] BRK [0xae64e000, 0xae64efff] PGTABLE |
| [ 0.000000] BRK [0xae64f000, 0xae64ffff] PGTABLE |
| [ 0.000000] BRK [0xae650000, 0xae650fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x36e13000-0x37700fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F5B30 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000DFD4B0E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000DFD4D930 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000DFD4B280 0026A8 (v02 PCENG COREBOOT 00010001 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x00000000DFD4B240 000040 |
| [ 0.000000] ACPI: FACS 0x00000000DFD4B240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000DFD4DA30 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000DFD4DAC0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000DFD4DB00 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HEST 0x00000000DFD4DB60 000198 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SSDT 0x00000000DFD4DD00 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.000000] ACPI: SSDT 0x00000000DFD4F390 00030C (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.000000] ACPI: HPET 0x00000000DFD4F6A0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x11effd000-0x11effffff] |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfd37fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] |
| [ 0.000000] On node 0 totalpages: 1043670 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 14261 pages used for memmap |
| [ 0.000000] DMA32 zone: 912696 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 1984 pages used for memmap |
| [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 |
| [ 0.000000] Reserved but unavailable: 98 pages |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x808 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xdfd38000-0xdfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x96/0x4dc with crng_init=0 |
| [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u1048576 |
| [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027340 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/internal-parabola64 rw quiet console=ttyS0,115200 iomem=relaxed |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 4010660K/4174680K available (10252K kernel code, 1263K rwdata, 3368K rodata, 1452K init, 632K bss, 164020K reserved, 0K cma-reserved) |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.000000] ftrace: allocating 31747 entries in 125 pages |
| [ 0.000000] Preemptible hierarchical RCU implementation. |
| [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2. |
| [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. |
| [ 0.000000] Tasks RCU enabled. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| [ 0.000000] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.000000] Offload RCU callbacks from CPUs: . |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] ACPI: Core revision 20180105 |
| [ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] APIC: Switch to symmetric I/O mode setup |
| [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.016666] tsc: Fast TSC calibration using PIT |
| [ 0.019999] tsc: Detected 999.964 MHz processor |
| [ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cd3ea217f1, max_idle_ns: 881590425527 ns |
| [ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.25 BogoMIPS (lpj=3333213) |
| [ 0.019999] pid_max: default: 32768 minimum: 301 |
| [ 0.019999] Security Framework initialized |
| [ 0.019999] Yama: becoming mindful. |
| [ 0.025452] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.027217] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.027357] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.027418] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.028160] CPU: Physical Processor ID: 0 |
| [ 0.028165] CPU: Processor Core ID: 0 |
| [ 0.028169] mce: CPU supports 6 MCE banks |
| [ 0.028193] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.028196] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| [ 0.028203] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.028205] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch |
| [ 0.031615] Freeing SMP alternatives memory: 24K |
| [ 0.036666] smpboot: CPU0: AMD G-T40E Processor (family: 0x14, model: 0x2, stepping: 0x0) |
| [ 0.046741] Performance Events: AMD PMU driver. |
| [ 0.046763] ... version: 0 |
| [ 0.046766] ... bit width: 48 |
| [ 0.046768] ... generic registers: 4 |
| [ 0.046771] ... value mask: 0000ffffffffffff |
| [ 0.046774] ... max period: 00007fffffffffff |
| [ 0.046776] ... fixed-purpose events: 0 |
| [ 0.046778] ... event mask: 000000000000000f |
| [ 0.053384] Hierarchical SRCU implementation. |
| [ 0.073638] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.080051] smp: Bringing up secondary CPUs ... |
| [ 0.110113] x86: Booting SMP configuration: |
| [ 0.110121] .... node #0, CPUs: #1 |
| [ 0.003333] do_IRQ: 1.55 No irq handler for vector |
| [ 0.116807] smp: Brought up 1 node, 2 CPUs |
| [ 0.116807] smpboot: Max logical packages: 1 |
| [ 0.116807] smpboot: Total of 2 processors activated (4001.51 BogoMIPS) |
| [ 0.117842] devtmpfs: initialized |
| [ 0.117842] x86/mm: Memory block size: 128MB |
| [ 0.120939] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns |
| [ 0.120939] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.120939] pinctrl core: initialized pinctrl subsystem |
| [ 0.120993] RTC time: 22:29:47, date: 04/29/18 |
| [ 0.121403] NET: Registered protocol family 16 |
| [ 0.126726] cpuidle: using governor ladder |
| [ 0.130048] cpuidle: using governor menu |
| [ 0.130257] ACPI: bus type PCI registered |
| [ 0.130265] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.130433] PCI: Using configuration type 1 for base access |
| [ 0.130433] PCI: Using configuration type 1 for extended access |
| [ 0.130551] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.130556] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.130558] mtrr: corrected configuration. |
| [ 0.134269] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages |
| [ 0.134269] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.137109] ACPI: Added _OSI(Module Device) |
| [ 0.137114] ACPI: Added _OSI(Processor Device) |
| [ 0.137117] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.137120] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.138306] ACPI: Executed 3 blocks of module-level executable AML code |
| [ 0.153321] ACPI: Interpreter enabled |
| [ 0.153420] ACPI: (supports S0 S1 S3 S4 S5) |
| [ 0.153425] ACPI: Using IOAPIC for interrupt routing |
| [ 0.153479] HEST: Table parsing has been initialized. |
| [ 0.153487] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.154111] ACPI: Enabled 9 GPEs in block 00 to 1F |
| [ 0.169747] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.169770] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.170211] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.171552] PCI host bridge to bus 0000:00 |
| [ 0.171562] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.171567] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.171573] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.171578] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.171584] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.171608] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.172074] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400 |
| [ 0.172135] pci 0000:00:04.0: enabling Extended Tags |
| [ 0.172211] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold |
| [ 0.172573] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400 |
| [ 0.172630] pci 0000:00:05.0: enabling Extended Tags |
| [ 0.172703] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold |
| [ 0.173055] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400 |
| [ 0.173112] pci 0000:00:06.0: enabling Extended Tags |
| [ 0.173184] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold |
| [ 0.173556] pci 0000:00:07.0: [1022:1515] type 01 class 0x060400 |
| [ 0.173613] pci 0000:00:07.0: enabling Extended Tags |
| [ 0.173685] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold |
| [ 0.174104] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.174143] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017] |
| [ 0.174160] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023] |
| [ 0.174178] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f] |
| [ 0.174195] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027] |
| [ 0.174212] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f] |
| [ 0.174230] pci 0000:00:11.0: reg 0x24: [mem 0xf7f03000-0xf7f033ff] |
| [ 0.174664] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.174697] pci 0000:00:12.0: reg 0x10: [mem 0xf7f00000-0xf7f00fff] |
| [ 0.175173] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.175210] pci 0000:00:12.2: reg 0x10: [mem 0xf7f04000-0xf7f040ff] |
| [ 0.175344] pci 0000:00:12.2: supports D1 D2 |
| [ 0.175349] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.175750] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.175783] pci 0000:00:13.0: reg 0x10: [mem 0xf7f01000-0xf7f01fff] |
| [ 0.176262] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.176299] pci 0000:00:13.2: reg 0x10: [mem 0xf7f05000-0xf7f050ff] |
| [ 0.176433] pci 0000:00:13.2: supports D1 D2 |
| [ 0.176439] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.176850] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.177333] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.177818] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.178287] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 |
| [ 0.178360] pci 0000:00:15.0: enabling Extended Tags |
| [ 0.178448] pci 0000:00:15.0: supports D1 D2 |
| [ 0.178867] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.178899] pci 0000:00:16.0: reg 0x10: [mem 0xf7f02000-0xf7f02fff] |
| [ 0.179378] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.179415] pci 0000:00:16.2: reg 0x10: [mem 0xf7f06000-0xf7f060ff] |
| [ 0.179549] pci 0000:00:16.2: supports D1 D2 |
| [ 0.179555] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.179956] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.180343] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.180698] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.181057] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.181445] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.181804] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.182161] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.182518] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.183062] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.183103] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.183140] pci 0000:01:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit] |
| [ 0.183165] pci 0000:01:00.0: reg 0x20: [mem 0xf7700000-0xf7703fff 64bit pref] |
| [ 0.183302] pci 0000:01:00.0: supports D1 D2 |
| [ 0.183307] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.193447] pci 0000:00:04.0: PCI bridge to [bus 01] |
| [ 0.193464] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] |
| [ 0.193472] pci 0000:00:04.0: bridge window [mem 0xf7800000-0xf78fffff] |
| [ 0.193483] pci 0000:00:04.0: bridge window [mem 0xf7700000-0xf77fffff 64bit pref] |
| [ 0.193678] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.193724] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] |
| [ 0.193761] pci 0000:02:00.0: reg 0x18: [mem 0xf7a00000-0xf7a00fff 64bit] |
| [ 0.193786] pci 0000:02:00.0: reg 0x20: [mem 0xf7900000-0xf7903fff 64bit pref] |
| [ 0.193947] pci 0000:02:00.0: supports D1 D2 |
| [ 0.193953] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.203434] pci 0000:00:05.0: PCI bridge to [bus 02] |
| [ 0.203451] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] |
| [ 0.203459] pci 0000:00:05.0: bridge window [mem 0xf7a00000-0xf7afffff] |
| [ 0.203470] pci 0000:00:05.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref] |
| [ 0.203680] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.203727] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff] |
| [ 0.203764] pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit] |
| [ 0.203789] pci 0000:03:00.0: reg 0x20: [mem 0xf7b00000-0xf7b03fff 64bit pref] |
| [ 0.203950] pci 0000:03:00.0: supports D1 D2 |
| [ 0.203956] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.213447] pci 0000:00:06.0: PCI bridge to [bus 03] |
| [ 0.213464] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff] |
| [ 0.213472] pci 0000:00:06.0: bridge window [mem 0xf7c00000-0xf7cfffff] |
| [ 0.213483] pci 0000:00:06.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref] |
| [ 0.213695] pci 0000:04:00.0: [168c:002a] type 00 class 0x028000 |
| [ 0.213749] pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit] |
| [ 0.213952] pci 0000:04:00.0: supports D1 |
| [ 0.213958] pci 0000:04:00.0: PME# supported from D0 D1 D3hot |
| [ 0.214132] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.214149] pci 0000:00:07.0: PCI bridge to [bus 04] |
| [ 0.214161] pci 0000:00:07.0: bridge window [mem 0xf7d00000-0xf7dfffff] |
| [ 0.214400] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) |
| [ 0.214417] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.214422] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.214428] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.214433] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.214618] pci 0000:06:00.0: [168c:002b] type 00 class 0x028000 |
| [ 0.214679] pci 0000:06:00.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] |
| [ 0.214893] pci 0000:06:00.0: supports D1 |
| [ 0.214898] pci 0000:06:00.0: PME# supported from D0 D1 D3hot D3cold |
| [ 0.223485] pci 0000:00:15.0: PCI bridge to [bus 06] |
| [ 0.223507] pci 0000:00:15.0: bridge window [mem 0xf7e00000-0xf7efffff] |
| [ 0.226127] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15) |
| [ 0.226738] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15) |
| [ 0.227164] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15) |
| [ 0.227581] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15) |
| [ 0.227997] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15) |
| [ 0.228412] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11 |
| [ 0.228821] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15) |
| [ 0.229236] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15) |
| [ 0.230090] vgaarb: loaded |
| [ 0.230800] EDAC MC: Ver: 3.0.0 |
| [ 0.233544] PCI: Using ACPI for IRQ routing |
| [ 0.233554] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.233745] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.233751] e820: reserve RAM buffer [mem 0xdfd38000-0xdfffffff] |
| [ 0.233755] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] |
| [ 0.234140] NetLabel: Initializing |
| [ 0.234144] NetLabel: domain hash size = 128 |
| [ 0.234146] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO |
| [ 0.234198] NetLabel: unlabeled traffic allowed by default |
| [ 0.234228] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.234228] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.236851] clocksource: Switched to clocksource tsc-early |
| [ 0.278067] VFS: Disk quotas dquot_6.6.0 |
| [ 0.278135] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.278416] pnp: PnP ACPI init |
| [ 0.279394] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.280476] pnp: PnP ACPI: found 1 devices |
| [ 0.294455] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.294609] pci 0000:00:04.0: PCI bridge to [bus 01] |
| [ 0.294617] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] |
| [ 0.294627] pci 0000:00:04.0: bridge window [mem 0xf7800000-0xf78fffff] |
| [ 0.294635] pci 0000:00:04.0: bridge window [mem 0xf7700000-0xf77fffff 64bit pref] |
| [ 0.294646] pci 0000:00:05.0: PCI bridge to [bus 02] |
| [ 0.294652] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] |
| [ 0.294661] pci 0000:00:05.0: bridge window [mem 0xf7a00000-0xf7afffff] |
| [ 0.294668] pci 0000:00:05.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref] |
| [ 0.294678] pci 0000:00:06.0: PCI bridge to [bus 03] |
| [ 0.294684] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff] |
| [ 0.294692] pci 0000:00:06.0: bridge window [mem 0xf7c00000-0xf7cfffff] |
| [ 0.294700] pci 0000:00:06.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref] |
| [ 0.294710] pci 0000:00:07.0: PCI bridge to [bus 04] |
| [ 0.294718] pci 0000:00:07.0: bridge window [mem 0xf7d00000-0xf7dfffff] |
| [ 0.294733] pci 0000:00:14.4: PCI bridge to [bus 05] |
| [ 0.294800] pci 0000:00:15.0: PCI bridge to [bus 06] |
| [ 0.294810] pci 0000:00:15.0: bridge window [mem 0xf7e00000-0xf7efffff] |
| [ 0.294830] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.294836] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.294841] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.294846] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.294852] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.294857] pci_bus 0000:01: resource 1 [mem 0xf7800000-0xf78fffff] |
| [ 0.294862] pci_bus 0000:01: resource 2 [mem 0xf7700000-0xf77fffff 64bit pref] |
| [ 0.294868] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.294872] pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff] |
| [ 0.294877] pci_bus 0000:02: resource 2 [mem 0xf7900000-0xf79fffff 64bit pref] |
| [ 0.294883] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| [ 0.294888] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] |
| [ 0.294892] pci_bus 0000:03: resource 2 [mem 0xf7b00000-0xf7bfffff 64bit pref] |
| [ 0.294898] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff] |
| [ 0.294904] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.294909] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] |
| [ 0.294914] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.294919] pci_bus 0000:05: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.294924] pci_bus 0000:06: resource 1 [mem 0xf7e00000-0xf7efffff] |
| [ 0.295211] NET: Registered protocol family 2 |
| [ 0.295724] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) |
| [ 0.295804] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.296091] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 0.296544] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 0.296770] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.296852] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.297120] NET: Registered protocol family 1 |
| [ 0.301828] PCI: CLS 64 bytes, default 64 |
| [ 0.301992] Unpacking initramfs... |
| [ 3.403714] Freeing initrd memory: 9144K |
| [ 3.403726] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 3.403734] software IO TLB [mem 0xdbd38000-0xdfd38000] (64MB) mapped at [ (ptrval)- (ptrval)] |
| [ 3.403823] LVT offset 0 assigned for vector 0x400 |
| [ 3.404080] perf: AMD IBS detected (0x000000ff) |
| [ 3.404287] Scanning for low memory corruption every 60 seconds |
| [ 3.406289] Initialise system trusted keyrings |
| [ 3.406323] Key type blacklist registered |
| [ 3.406765] workingset: timestamp_bits=44 max_order=20 bucket_order=0 |
| [ 3.411648] zbud: loaded |
| [ 3.419810] Key type asymmetric registered |
| [ 3.419817] Asymmetric key parser 'x509' registered |
| [ 3.420085] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 3.420297] io scheduler noop registered |
| [ 3.420301] io scheduler deadline registered |
| [ 3.420475] io scheduler cfq registered (default) |
| [ 3.420479] io scheduler mq-deadline registered |
| [ 3.420482] io scheduler kyber registered |
| [ 3.420510] io scheduler bfq registered |
| [ 3.424177] pcieport 0000:00:04.0: Signaling PME with IRQ 24 |
| [ 3.424238] pcieport 0000:00:05.0: Signaling PME with IRQ 25 |
| [ 3.424302] pcieport 0000:00:06.0: Signaling PME with IRQ 26 |
| [ 3.424363] pcieport 0000:00:07.0: Signaling PME with IRQ 27 |
| [ 3.424468] pcieport 0000:00:15.0: Signaling PME with IRQ 28 |
| [ 3.424739] efifb: probing for efifb |
| [ 3.424768] efifb: framebuffer at 0xa0000, using 64k, total 64k |
| [ 3.424772] efifb: mode is 640x480x1, linelength=80, pages=1 |
| [ 3.424774] efifb: scrolling: redraw |
| [ 3.424780] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| [ 3.449327] Console: switching to colour frame buffer device 80x30 |
| [ 3.473615] fb0: EFI VGA frame buffer device |
| [ 3.473858] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| [ 3.474101] ACPI: Power Button [PWRB] |
| [ 3.474335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 3.474572] ACPI: Power Button [PWRF] |
| [ 3.477622] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 3.477629] ACPI: Thermal Zone [TZ00] (58 C) |
| [ 3.477850] GHES: Failed to enable APEI firmware first mode. |
| [ 3.478521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 3.499616] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 3.521081] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 3.526012] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 3.526884] NET: Registered protocol family 10 |
| [ 3.544973] Segment Routing with IPv6 |
| [ 3.545068] NET: Registered protocol family 17 |
| [ 3.545877] RAS: Correctable Errors collector initialized. |
| [ 3.546055] microcode: CPU0: patch_level=0x05000119 |
| [ 3.546129] microcode: CPU1: patch_level=0x05000119 |
| [ 3.546403] microcode: Microcode Update Driver: v2.2. |
| [ 3.546442] sched_clock: Marking stable (3546383223, 0)->(3632261255, -85878032) |
| [ 3.547338] registered taskstats version 1 |
| [ 3.547361] Loading compiled-in X.509 certificates |
| [ 3.547425] zswap: loaded using pool lzo/zbud |
| [ 3.562684] Key type big_key registered |
| [ 3.563662] Magic number: 14:428:503 |
| [ 3.563667] hash matches drivers/base/power/main.c:692 |
| [ 3.563807] hctosys: unable to open rtc device (rtc0) |
| [ 3.573039] Freeing unused kernel memory: 1452K |
| [ 3.573046] Write protecting the kernel read-only data: 16384k |
| [ 3.576045] Freeing unused kernel memory: 2016K |
| [ 3.583731] Freeing unused kernel memory: 728K |
| [ 3.938254] ACPI: bus type USB registered |
| [ 3.938336] usbcore: registered new interface driver usbfs |
| [ 3.938375] usbcore: registered new interface driver hub |
| [ 3.946530] SCSI subsystem initialized |
| [ 3.948100] usbcore: registered new device driver usb |
| [ 3.951475] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 3.955162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 3.955168] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after |
| [ 3.956139] ehci-pci: EHCI PCI platform driver |
| [ 3.956895] QUIRK: Enable AMD PLL fix |
| [ 3.957018] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 3.957043] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 3.957063] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 3.957129] ehci-pci 0000:00:12.2: debug port 1 |
| [ 3.957317] ehci-pci 0000:00:12.2: irq 17, io mem 0xf7f04000 |
| [ 3.969829] libata version 3.00 loaded. |
| [ 3.970235] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 3.970450] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 3.970457] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.970463] usb usb1: Product: EHCI Host Controller |
| [ 3.970467] usb usb1: Manufacturer: Linux 4.16.5-gnu-1 ehci_hcd |
| [ 3.970472] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 3.970921] hub 1-0:1.0: USB hub found |
| [ 3.970951] hub 1-0:1.0: 5 ports detected |
| [ 3.972278] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 3.972307] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 3.972322] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 3.972387] ehci-pci 0000:00:13.2: debug port 1 |
| [ 3.972465] ehci-pci 0000:00:13.2: irq 17, io mem 0xf7f05000 |
| [ 3.983444] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 3.983677] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 3.983683] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.983688] usb usb2: Product: EHCI Host Controller |
| [ 3.983692] usb usb2: Manufacturer: Linux 4.16.5-gnu-1 ehci_hcd |
| [ 3.983696] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 3.984155] hub 2-0:1.0: USB hub found |
| [ 3.984185] hub 2-0:1.0: 5 ports detected |
| [ 3.985446] ehci-pci 0000:00:16.2: EHCI Host Controller |
| [ 3.985475] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 |
| [ 3.985489] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 3.985554] ehci-pci 0000:00:16.2: debug port 1 |
| [ 3.985637] ehci-pci 0000:00:16.2: irq 17, io mem 0xf7f06000 |
| [ 3.996811] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 |
| [ 3.997019] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 3.997026] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.997030] usb usb3: Product: EHCI Host Controller |
| [ 3.997035] usb usb3: Manufacturer: Linux 4.16.5-gnu-1 ehci_hcd |
| [ 3.997039] usb usb3: SerialNumber: 0000:00:16.2 |
| [ 3.997567] hub 3-0:1.0: USB hub found |
| [ 3.997606] hub 3-0:1.0: 4 ports detected |
| [ 3.998449] ahci 0000:00:11.0: version 3.0 |
| [ 3.999307] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 3.999315] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 3.999568] ohci-pci: OHCI PCI platform driver |
| [ 4.007262] scsi host0: ahci |
| [ 4.010247] scsi host1: ahci |
| [ 4.013531] scsi host2: ahci |
| [ 4.016818] scsi host3: ahci |
| [ 4.024008] scsi host4: ahci |
| [ 4.029611] scsi host5: ahci |
| [ 4.029886] ata1: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03100 irq 19 |
| [ 4.029894] ata2: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03180 irq 19 |
| [ 4.029899] ata3: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03200 irq 19 |
| [ 4.029904] ata4: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03280 irq 19 |
| [ 4.029910] ata5: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03300 irq 19 |
| [ 4.029915] ata6: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03380 irq 19 |
| [ 4.030793] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 4.030818] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 |
| [ 4.030976] ohci-pci 0000:00:12.0: irq 18, io mem 0xf7f00000 |
| [ 4.091264] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 4.091273] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 4.091278] usb usb4: Product: OHCI PCI host controller |
| [ 4.091283] usb usb4: Manufacturer: Linux 4.16.5-gnu-1 ohci_hcd |
| [ 4.091287] usb usb4: SerialNumber: 0000:00:12.0 |
| [ 4.092136] hub 4-0:1.0: USB hub found |
| [ 4.092218] hub 4-0:1.0: 5 ports detected |
| [ 4.093619] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 4.093638] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 |
| [ 4.093708] ohci-pci 0000:00:13.0: irq 18, io mem 0xf7f01000 |
| [ 4.154586] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 4.154596] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 4.154601] usb usb5: Product: OHCI PCI host controller |
| [ 4.154605] usb usb5: Manufacturer: Linux 4.16.5-gnu-1 ohci_hcd |
| [ 4.154610] usb usb5: SerialNumber: 0000:00:13.0 |
| [ 4.155449] hub 5-0:1.0: USB hub found |
| [ 4.155533] hub 5-0:1.0: 5 ports detected |
| [ 4.156889] ohci-pci 0000:00:16.0: OHCI PCI host controller |
| [ 4.156909] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6 |
| [ 4.157045] ohci-pci 0000:00:16.0: irq 18, io mem 0xf7f02000 |
| [ 4.217918] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 4.217927] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 4.217932] usb usb6: Product: OHCI PCI host controller |
| [ 4.217937] usb usb6: Manufacturer: Linux 4.16.5-gnu-1 ohci_hcd |
| [ 4.217941] usb usb6: SerialNumber: 0000:00:16.0 |
| [ 4.218774] hub 6-0:1.0: USB hub found |
| [ 4.218858] hub 6-0:1.0: 4 ports detected |
| [ 4.326976] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 4.348450] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 4.355672] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 4.361687] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 4.362481] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 4.364892] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 4.427023] tsc: Refined TSC clocksource calibration: 1000.001 MHz |
| [ 4.427044] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe6a1810bf3, max_idle_ns: 440795249465 ns |
| [ 4.427189] clocksource: Switched to clocksource tsc |
| [ 4.477528] usb 3-1: New USB device found, idVendor=058f, idProduct=6366 |
| [ 4.477539] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 4.477545] usb 3-1: Product: Flash Card Reader/Writer |
| [ 4.477551] usb 3-1: Manufacturer: Generic |
| [ 4.477556] usb 3-1: SerialNumber: 058F63666485 |
| [ 4.484611] usb-storage 3-1:1.0: USB Mass Storage device detected |
| [ 4.489174] scsi host6: usb-storage 3-1:1.0 |
| [ 4.489487] usbcore: registered new interface driver usb-storage |
| [ 4.491226] usbcore: registered new interface driver uas |
| [ 4.500184] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 4.500959] ata1.00: ATA-11: SATA SSD, SBFM01.1, max UDMA/133 |
| [ 4.500968] ata1.00: 31277232 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| [ 4.501565] ata1.00: configured for UDMA/133 |
| [ 4.502362] scsi 0:0:0:0: Direct-Access ATA SATA SSD 01.1 PQ: 0 ANSI: 5 |
| [ 4.517167] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) |
| [ 4.517220] sd 0:0:0:0: [sda] Write Protect is off |
| [ 4.517227] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 4.517307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 4.518708] sda: sda1 sda2 |
| [ 4.520198] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 4.583587] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 4.628070] device-mapper: uevent: version 1.0.3 |
| [ 4.629432] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com |
| [ 4.635512] random: lvm: uninitialized urandom read (2 bytes read) |
| [ 5.041049] random: fast init done |
| [ 5.495966] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4 |
| [ 5.499281] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [ 9.329289] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) |
| [ 9.663217] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) |
| [ 9.680640] systemd[1]: Detected architecture x86-64. |
| [ 9.686749] systemd[1]: Set hostname to <apu1>. |
| [ 10.059925] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 10.063234] systemd[1]: Created slice system-netctl.slice. |
| [ 10.063494] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 10.063684] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 10.063728] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 10.063999] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 10.064050] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 10.064986] systemd[1]: Created slice system-openvpn\x2dclient.slice. |
| [ 10.065077] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 10.065297] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 10.065340] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 10.066169] systemd[1]: Created slice system-getty.slice. |
| [ 10.076329] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 10.083757] systemd[1]: Listening on Process Core Dump Socket. |
| [ 10.083858] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 10.603858] systemd-journald[233]: Received request to flush runtime journal from PID 1 |
| [ 10.739482] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 10.824036] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 10.890536] rtc_cmos 00:00: RTC can wake from S4 |
| [ 10.892400] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 |
| [ 10.893443] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 10.963217] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 10.963234] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection |
| [ 10.963892] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 |
| [ 10.994554] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver |
| [ 10.994786] sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use |
| [ 11.020118] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 11.024688] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0x (ptrval), 00:0d:b9:49:7b:a8, XID 0c200000 IRQ 29 |
| [ 11.024699] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 11.027242] sp5100-tco: probe of sp5100-tco failed with error -16 |
| [ 11.043606] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 11.045207] r8169 0000:02:00.0 eth1: RTL8168e/8111e at 0x (ptrval), 00:0d:b9:49:7b:a9, XID 0c200000 IRQ 30 |
| [ 11.045216] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 11.060278] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 11.061769] r8169 0000:03:00.0 eth2: RTL8168e/8111e at 0x (ptrval), 00:0d:b9:49:7b:aa, XID 0c200000 IRQ 31 |
| [ 11.061778] r8169 0000:03:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 11.072221] input: PC Speaker as /devices/platform/pcspkr/input/input9 |
| [ 11.267069] Unknown PC Engines board: APU1 |
| [ 11.403664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) |
| [ 11.407508] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 11.435461] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 11.436627] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 11.436635] cfg80211: failed to load regulatory.db |
| [ 11.643780] r8169 0000:02:00.0 pe0_middle: renamed from eth1 |
| [ 11.705178] r8169 0000:03:00.0 pe0_right: renamed from eth2 |
| [ 11.736325] r8169 0000:01:00.0 pe0_left: renamed from eth0 |
| [ 11.926268] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 12.150184] lan0: port 1(pe0_left) entered blocking state |
| [ 12.150223] lan0: port 1(pe0_left) entered disabled state |
| [ 12.150438] device pe0_left entered promiscuous mode |
| [ 12.151447] lan0: port 2(pe0_middle) entered blocking state |
| [ 12.151458] lan0: port 2(pe0_middle) entered disabled state |
| [ 12.151569] device pe0_middle entered promiscuous mode |
| [ 12.156270] wan0: port 1(pe0_right) entered blocking state |
| [ 12.156309] wan0: port 1(pe0_right) entered disabled state |
| [ 12.156499] device pe0_right entered promiscuous mode |
| [ 12.208595] 0000:03:00.0: Missing Free firmware (non-Free firmware loading is disabled) |
| [ 12.263483] kvm: Nested Virtualization enabled |
| [ 12.263494] kvm: Nested Paging enabled |
| [ 12.280306] r8169 0000:03:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2 |
| [ 12.280323] r8169 0000:03:00.0 pe0_right: unable to load firmware patch /*(DEBLOBBED)*/ (-2) |
| [ 12.324344] r8169 0000:03:00.0 pe0_right: link down |
| [ 12.324360] r8169 0000:03:00.0 pe0_right: link down |
| [ 12.324551] IPv6: ADDRCONF(NETDEV_UP): pe0_right: link is not ready |
| [ 12.329877] 0000:02:00.0: Missing Free firmware (non-Free firmware loading is disabled) |
| [ 12.379170] r8169 0000:02:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2 |
| [ 12.379187] r8169 0000:02:00.0 pe0_middle: unable to load firmware patch /*(DEBLOBBED)*/ (-2) |
| [ 12.448805] r8169 0000:02:00.0 pe0_middle: link down |
| [ 12.448832] r8169 0000:02:00.0 pe0_middle: link down |
| [ 12.449026] IPv6: ADDRCONF(NETDEV_UP): pe0_middle: link is not ready |
| [ 12.449788] 0000:01:00.0: Missing Free firmware (non-Free firmware loading is disabled) |
| [ 12.490151] r8169 0000:01:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2 |
| [ 12.490167] r8169 0000:01:00.0 pe0_left: unable to load firmware patch /*(DEBLOBBED)*/ (-2) |
| [ 12.528615] r8169 0000:01:00.0 pe0_left: link down |
| [ 12.528795] IPv6: ADDRCONF(NETDEV_UP): pe0_left: link is not ready |
| [ 12.529343] IPv6: ADDRCONF(NETDEV_UP): wan0: link is not ready |
| [ 12.633204] 8021q: 802.1Q VLAN Support v1.8 |
| [ 12.890081] IPv6: ADDRCONF(NETDEV_UP): lan0: link is not ready |
| [ 13.550296] random: crng init done |
| [ 13.853023] ath: EEPROM regdomain: 0x60 |
| [ 13.853028] ath: EEPROM indicates we should expect a direct regpair map |
| [ 13.853035] ath: Country alpha2 being used: 00 |
| [ 13.853038] ath: Regpair used: 0x60 |
| [ 13.892232] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 13.895658] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffff912ac0bc0000, irq=19 |
| [ 13.959917] ath: phy1: Enable LNA combining |
| [ 13.963043] ath: phy1: ASPM enabled: 0x43 |
| [ 13.963051] ath: EEPROM regdomain: 0x60 |
| [ 13.963054] ath: EEPROM indicates we should expect a direct regpair map |
| [ 13.963060] ath: Country alpha2 being used: 00 |
| [ 13.963062] ath: Regpair used: 0x60 |
| [ 13.968411] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' |
| [ 13.973333] ieee80211 phy1: Atheros AR9285 Rev:2 mem=0xffff912ac0c00000, irq=16 |
| [ 14.003683] ath9k 0000:04:00.0 pw0: renamed from wlan0 |
| [ 14.030282] ath9k 0000:06:00.0 pw1: renamed from wlan1 |
| [ 14.046520] r8169 0000:02:00.0 pe0_middle: link up |
| [ 14.046539] IPv6: ADDRCONF(NETDEV_CHANGE): pe0_middle: link becomes ready |
| [ 14.047430] lan0: port 2(pe0_middle) entered blocking state |
| [ 14.047438] lan0: port 2(pe0_middle) entered forwarding state |
| [ 14.047624] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready |
| [ 14.786562] r8169 0000:03:00.0 pe0_right: link up |
| [ 14.786589] IPv6: ADDRCONF(NETDEV_CHANGE): pe0_right: link becomes ready |
| [ 14.787600] wan0: port 1(pe0_right) entered blocking state |
| [ 14.787607] wan0: port 1(pe0_right) entered forwarding state |
| [ 14.787807] IPv6: ADDRCONF(NETDEV_CHANGE): wan0: link becomes ready |
| [ 24.281064] tun: Universal TUN/TAP device driver, 1.6 |