blob: 0c6f87e602869218a57e0d9280fbe7e1b10a034a [file] [log] [blame]
[ 0.000000] Linux version 4.16.5-gnu-1 (builduser@parabola) (gcc version 7.3.1 20180312 (GCC)) #1 SMP PREEMPT Fri Apr 27 01:32:09 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/internal-parabola64 rw quiet console=ttyS0,115200 iomem=relaxed
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfd37fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfd38000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: PC Engines APU1/APU1, BIOS 4.7-903-gd4e5762bd7 04/28/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 000000000 mask F80000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xdfd38 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5950-0x000f595f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x10d64a000, 0x10d64afff] PGTABLE
[ 0.000000] BRK [0x10d64b000, 0x10d64bfff] PGTABLE
[ 0.000000] BRK [0x10d64c000, 0x10d64cfff] PGTABLE
[ 0.000000] BRK [0x10d64d000, 0x10d64dfff] PGTABLE
[ 0.000000] BRK [0x10d64e000, 0x10d64efff] PGTABLE
[ 0.000000] BRK [0x10d64f000, 0x10d64ffff] PGTABLE
[ 0.000000] BRK [0x10d650000, 0x10d650fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36e13000-0x37700fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F5B30 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000DFD4B0E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000DFD4D930 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000DFD4B280 0026A8 (v02 PCENG COREBOOT 00010001 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000DFD4B240 000040
[ 0.000000] ACPI: FACS 0x00000000DFD4B240 000040
[ 0.000000] ACPI: SSDT 0x00000000DFD4DA30 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000DFD4DAC0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000DFD4DB00 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000DFD4DB60 000198 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DFD4DD00 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000DFD4F390 00030C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000DFD4F6A0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11effd000-0x11effffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfd37fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.000000] On node 0 totalpages: 1043670
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14261 pages used for memmap
[ 0.000000] DMA32 zone: 912696 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfd38000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x96/0x4dc with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u1048576
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027340
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/internal-parabola64 rw quiet console=ttyS0,115200 iomem=relaxed
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4010660K/4174680K available (10252K kernel code, 1263K rwdata, 3368K rodata, 1452K init, 632K bss, 164020K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 31747 entries in 125 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 1000.016 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xe6a262ae7b, max_idle_ns: 440795217019 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.36 BogoMIPS (lpj=3333386)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.019999] Security Framework initialized
[ 0.019999] Yama: becoming mindful.
[ 0.025442] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.027202] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.027341] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.027404] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.028147] CPU: Physical Processor ID: 0
[ 0.028152] CPU: Processor Core ID: 0
[ 0.028155] mce: CPU supports 6 MCE banks
[ 0.028178] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.028181] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.028188] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.028191] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.028543] Freeing SMP alternatives memory: 24K
[ 0.033333] smpboot: CPU0: AMD G-T40E Processor (family: 0x14, model: 0x2, stepping: 0x0)
[ 0.043410] Performance Events: AMD PMU driver.
[ 0.043432] ... version: 0
[ 0.043435] ... bit width: 48
[ 0.043437] ... generic registers: 4
[ 0.043440] ... value mask: 0000ffffffffffff
[ 0.043442] ... max period: 00007fffffffffff
[ 0.043445] ... fixed-purpose events: 0
[ 0.043447] ... event mask: 000000000000000f
[ 0.050050] Hierarchical SRCU implementation.
[ 0.070302] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.076716] smp: Bringing up secondary CPUs ...
[ 0.106783] x86: Booting SMP configuration:
[ 0.106790] .... node #0, CPUs: #1
[ 0.003333] do_IRQ: 1.55 No irq handler for vector
[ 0.113473] smp: Brought up 1 node, 2 CPUs
[ 0.113473] smpboot: Max logical packages: 1
[ 0.113473] smpboot: Total of 2 processors activated (4001.73 BogoMIPS)
[ 0.114510] devtmpfs: initialized
[ 0.114510] x86/mm: Memory block size: 128MB
[ 0.117605] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.117605] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.117605] pinctrl core: initialized pinctrl subsystem
[ 0.117638] RTC time: 21:01:07, date: 04/29/18
[ 0.118047] NET: Registered protocol family 16
[ 0.123392] cpuidle: using governor ladder
[ 0.126716] cpuidle: using governor menu
[ 0.126925] ACPI: bus type PCI registered
[ 0.126933] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.127105] PCI: Using configuration type 1 for base access
[ 0.127105] PCI: Using configuration type 1 for extended access
[ 0.127124] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.127127] mtrr: probably your BIOS does not setup all CPUs.
[ 0.127129] mtrr: corrected configuration.
[ 0.130668] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.130668] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.133613] ACPI: Added _OSI(Module Device)
[ 0.133618] ACPI: Added _OSI(Processor Device)
[ 0.133621] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.133625] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.134810] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.149612] ACPI: Interpreter enabled
[ 0.149693] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.149697] ACPI: Using IOAPIC for interrupt routing
[ 0.149759] HEST: Table parsing has been initialized.
[ 0.149769] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.150410] ACPI: Enabled 9 GPEs in block 00 to 1F
[ 0.166042] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.166065] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.166481] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.167833] PCI host bridge to bus 0000:00
[ 0.167842] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.167847] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.167853] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.167858] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.167864] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.167888] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.168359] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.168420] pci 0000:00:04.0: enabling Extended Tags
[ 0.168497] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.168857] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400
[ 0.168914] pci 0000:00:05.0: enabling Extended Tags
[ 0.168986] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.169339] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400
[ 0.169396] pci 0000:00:06.0: enabling Extended Tags
[ 0.169468] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.169823] pci 0000:00:07.0: [1022:1515] type 01 class 0x060400
[ 0.169880] pci 0000:00:07.0: enabling Extended Tags
[ 0.169952] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.170390] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.170429] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
[ 0.170446] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
[ 0.170464] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
[ 0.170481] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
[ 0.170498] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
[ 0.170515] pci 0000:00:11.0: reg 0x24: [mem 0xf7f03000-0xf7f033ff]
[ 0.170954] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.170987] pci 0000:00:12.0: reg 0x10: [mem 0xf7f00000-0xf7f00fff]
[ 0.171470] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.171507] pci 0000:00:12.2: reg 0x10: [mem 0xf7f04000-0xf7f040ff]
[ 0.171641] pci 0000:00:12.2: supports D1 D2
[ 0.171647] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.172052] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.172084] pci 0000:00:13.0: reg 0x10: [mem 0xf7f01000-0xf7f01fff]
[ 0.172567] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.172604] pci 0000:00:13.2: reg 0x10: [mem 0xf7f05000-0xf7f050ff]
[ 0.172738] pci 0000:00:13.2: supports D1 D2
[ 0.172744] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.173138] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.173641] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.174130] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.174601] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.174675] pci 0000:00:15.0: enabling Extended Tags
[ 0.174763] pci 0000:00:15.0: supports D1 D2
[ 0.175178] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.175210] pci 0000:00:16.0: reg 0x10: [mem 0xf7f02000-0xf7f02fff]
[ 0.175691] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.175729] pci 0000:00:16.2: reg 0x10: [mem 0xf7f06000-0xf7f060ff]
[ 0.175863] pci 0000:00:16.2: supports D1 D2
[ 0.175869] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.176270] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.176641] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.177019] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.177379] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.177772] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.178134] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.178491] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.178849] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.179392] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.179433] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.179470] pci 0000:01:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[ 0.179495] pci 0000:01:00.0: reg 0x20: [mem 0xf7700000-0xf7703fff 64bit pref]
[ 0.179632] pci 0000:01:00.0: supports D1 D2
[ 0.179637] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.190100] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.190116] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.190124] pci 0000:00:04.0: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.190135] pci 0000:00:04.0: bridge window [mem 0xf7700000-0xf77fffff 64bit pref]
[ 0.190330] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.190377] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.190414] pci 0000:02:00.0: reg 0x18: [mem 0xf7a00000-0xf7a00fff 64bit]
[ 0.190439] pci 0000:02:00.0: reg 0x20: [mem 0xf7900000-0xf7903fff 64bit pref]
[ 0.190599] pci 0000:02:00.0: supports D1 D2
[ 0.190604] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200114] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.200131] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
[ 0.200139] pci 0000:00:05.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.200150] pci 0000:00:05.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
[ 0.200361] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.200407] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.200444] pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.200469] pci 0000:03:00.0: reg 0x20: [mem 0xf7b00000-0xf7b03fff 64bit pref]
[ 0.200629] pci 0000:03:00.0: supports D1 D2
[ 0.200635] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.210101] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.210117] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.210125] pci 0000:00:06.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.210136] pci 0000:00:06.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 0.210346] pci 0000:04:00.0: [168c:002a] type 00 class 0x028000
[ 0.210400] pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 0.210605] pci 0000:04:00.0: supports D1
[ 0.210610] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[ 0.210780] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.210801] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.210813] pci 0000:00:07.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.211053] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 0.211070] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.211076] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.211081] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.211086] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.211271] pci 0000:06:00.0: [168c:002b] type 00 class 0x028000
[ 0.211333] pci 0000:06:00.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.211549] pci 0000:06:00.0: supports D1
[ 0.211554] pci 0000:06:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.220165] pci 0000:00:15.0: PCI bridge to [bus 06]
[ 0.220187] pci 0000:00:15.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.222791] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.223401] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.223820] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.224235] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.224650] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.225065] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11
[ 0.225473] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.225886] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.226757] vgaarb: loaded
[ 0.227466] EDAC MC: Ver: 3.0.0
[ 0.230210] PCI: Using ACPI for IRQ routing
[ 0.230220] PCI: pci_cache_line_size set to 64 bytes
[ 0.230411] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.230417] e820: reserve RAM buffer [mem 0xdfd38000-0xdfffffff]
[ 0.230421] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.230819] NetLabel: Initializing
[ 0.230823] NetLabel: domain hash size = 128
[ 0.230825] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.230878] NetLabel: unlabeled traffic allowed by default
[ 0.230901] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.230901] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.233514] clocksource: Switched to clocksource tsc-early
[ 0.274652] VFS: Disk quotas dquot_6.6.0
[ 0.274720] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.274999] pnp: PnP ACPI init
[ 0.275972] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.277000] pnp: PnP ACPI: found 1 devices
[ 0.291045] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.291199] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.291208] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.291218] pci 0000:00:04.0: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.291226] pci 0000:00:04.0: bridge window [mem 0xf7700000-0xf77fffff 64bit pref]
[ 0.291237] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.291243] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
[ 0.291251] pci 0000:00:05.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.291259] pci 0000:00:05.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
[ 0.291269] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.291275] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.291283] pci 0000:00:06.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.291291] pci 0000:00:06.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 0.291300] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.291309] pci 0000:00:07.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.291323] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 0.291390] pci 0000:00:15.0: PCI bridge to [bus 06]
[ 0.291400] pci 0000:00:15.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.291421] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.291426] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.291431] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.291437] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.291442] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.291447] pci_bus 0000:01: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.291452] pci_bus 0000:01: resource 2 [mem 0xf7700000-0xf77fffff 64bit pref]
[ 0.291458] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.291463] pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.291468] pci_bus 0000:02: resource 2 [mem 0xf7900000-0xf79fffff 64bit pref]
[ 0.291473] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.291478] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.291483] pci_bus 0000:03: resource 2 [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 0.291488] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.291494] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.291499] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.291504] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.291509] pci_bus 0000:05: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.291514] pci_bus 0000:06: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.291805] NET: Registered protocol family 2
[ 0.292320] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.292400] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.292686] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.293132] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.293379] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.293453] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.293711] NET: Registered protocol family 1
[ 0.298383] PCI: CLS 64 bytes, default 64
[ 0.298549] Unpacking initramfs...
[ 3.405459] Freeing initrd memory: 9144K
[ 3.405472] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.405481] software IO TLB [mem 0xdbd38000-0xdfd38000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 3.405571] LVT offset 0 assigned for vector 0x400
[ 3.405815] perf: AMD IBS detected (0x000000ff)
[ 3.406021] Scanning for low memory corruption every 60 seconds
[ 3.408092] Initialise system trusted keyrings
[ 3.408129] Key type blacklist registered
[ 3.408553] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 3.413488] zbud: loaded
[ 3.422023] Key type asymmetric registered
[ 3.422030] Asymmetric key parser 'x509' registered
[ 3.422232] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 3.422368] io scheduler noop registered
[ 3.422371] io scheduler deadline registered
[ 3.422545] io scheduler cfq registered (default)
[ 3.422549] io scheduler mq-deadline registered
[ 3.422552] io scheduler kyber registered
[ 3.422580] io scheduler bfq registered
[ 3.426154] pcieport 0000:00:04.0: Signaling PME with IRQ 24
[ 3.426218] pcieport 0000:00:05.0: Signaling PME with IRQ 25
[ 3.426280] pcieport 0000:00:06.0: Signaling PME with IRQ 26
[ 3.426341] pcieport 0000:00:07.0: Signaling PME with IRQ 27
[ 3.426447] pcieport 0000:00:15.0: Signaling PME with IRQ 28
[ 3.426789] efifb: probing for efifb
[ 3.426818] efifb: framebuffer at 0xa0000, using 64k, total 64k
[ 3.426822] efifb: mode is 640x480x1, linelength=80, pages=1
[ 3.426824] efifb: scrolling: redraw
[ 3.426829] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.451673] Console: switching to colour frame buffer device 80x30
[ 3.476235] fb0: EFI VGA frame buffer device
[ 3.476479] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.476733] ACPI: Power Button [PWRB]
[ 3.476968] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.477204] ACPI: Power Button [PWRF]
[ 3.480284] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.480291] ACPI: Thermal Zone [TZ00] (56 C)
[ 3.480514] GHES: Failed to enable APEI firmware first mode.
[ 3.481176] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.502274] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.523778] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.528252] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.529105] NET: Registered protocol family 10
[ 3.547302] Segment Routing with IPv6
[ 3.547393] NET: Registered protocol family 17
[ 3.548160] RAS: Correctable Errors collector initialized.
[ 3.548280] microcode: CPU0: patch_level=0x05000119
[ 3.548399] microcode: CPU1: patch_level=0x05000119
[ 3.548659] microcode: Microcode Update Driver: v2.2.
[ 3.548692] sched_clock: Marking stable (3548639787, 0)->(3634521919, -85882132)
[ 3.549469] registered taskstats version 1
[ 3.549492] Loading compiled-in X.509 certificates
[ 3.549560] zswap: loaded using pool lzo/zbud
[ 3.566236] Key type big_key registered
[ 3.567427] Magic number: 14:357:46
[ 3.567600] hctosys: unable to open rtc device (rtc0)
[ 3.576992] Freeing unused kernel memory: 1452K
[ 3.576999] Write protecting the kernel read-only data: 16384k
[ 3.579932] Freeing unused kernel memory: 2016K
[ 3.587434] Freeing unused kernel memory: 728K
[ 3.931874] SCSI subsystem initialized
[ 3.948393] ACPI: bus type USB registered
[ 3.948490] usbcore: registered new interface driver usbfs
[ 3.948526] usbcore: registered new interface driver hub
[ 3.950459] usbcore: registered new device driver usb
[ 3.955044] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.956047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.956053] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 3.957163] ehci-pci: EHCI PCI platform driver
[ 3.957808] QUIRK: Enable AMD PLL fix
[ 3.957923] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.957944] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.957973] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.958038] ehci-pci 0000:00:12.2: debug port 1
[ 3.958162] ehci-pci 0000:00:12.2: irq 17, io mem 0xf7f04000
[ 3.962592] libata version 3.00 loaded.
[ 3.970180] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.970462] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.970469] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.970474] usb usb1: Product: EHCI Host Controller
[ 3.970478] usb usb1: Manufacturer: Linux 4.16.5-gnu-1 ehci_hcd
[ 3.970482] usb usb1: SerialNumber: 0000:00:12.2
[ 3.970943] hub 1-0:1.0: USB hub found
[ 3.970973] hub 1-0:1.0: 5 ports detected
[ 3.972199] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.972218] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.972232] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.972297] ehci-pci 0000:00:13.2: debug port 1
[ 3.972375] ehci-pci 0000:00:13.2: irq 17, io mem 0xf7f05000
[ 3.983499] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.983705] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.983712] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.983716] usb usb2: Product: EHCI Host Controller
[ 3.983721] usb usb2: Manufacturer: Linux 4.16.5-gnu-1 ehci_hcd
[ 3.983725] usb usb2: SerialNumber: 0000:00:13.2
[ 3.984153] hub 2-0:1.0: USB hub found
[ 3.984182] hub 2-0:1.0: 5 ports detected
[ 3.984893] ahci 0000:00:11.0: version 3.0
[ 3.985734] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 3.985743] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 3.996962] scsi host0: ahci
[ 4.003177] scsi host1: ahci
[ 4.010373] scsi host2: ahci
[ 4.016546] scsi host3: ahci
[ 4.023528] scsi host4: ahci
[ 4.026950] scsi host5: ahci
[ 4.027385] ata1: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03100 irq 19
[ 4.027392] ata2: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03180 irq 19
[ 4.027398] ata3: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03200 irq 19
[ 4.027403] ata4: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03280 irq 19
[ 4.027409] ata5: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03300 irq 19
[ 4.027414] ata6: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03380 irq 19
[ 4.028234] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 4.028255] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 4.028271] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.028336] ehci-pci 0000:00:16.2: debug port 1
[ 4.028413] ehci-pci 0000:00:16.2: irq 17, io mem 0xf7f06000
[ 4.040425] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 4.041221] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.041230] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.041235] usb usb3: Product: EHCI Host Controller
[ 4.041240] usb usb3: Manufacturer: Linux 4.16.5-gnu-1 ehci_hcd
[ 4.041244] usb usb3: SerialNumber: 0000:00:16.2
[ 4.042057] hub 3-0:1.0: USB hub found
[ 4.042094] hub 3-0:1.0: 4 ports detected
[ 4.043848] ohci-pci: OHCI PCI platform driver
[ 4.044481] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 4.044502] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 4.044670] ohci-pci 0000:00:12.0: irq 18, io mem 0xf7f00000
[ 4.104588] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.104598] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.104603] usb usb4: Product: OHCI PCI host controller
[ 4.104607] usb usb4: Manufacturer: Linux 4.16.5-gnu-1 ohci_hcd
[ 4.104611] usb usb4: SerialNumber: 0000:00:12.0
[ 4.105473] hub 4-0:1.0: USB hub found
[ 4.105556] hub 4-0:1.0: 5 ports detected
[ 4.106897] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 4.106916] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 4.106988] ohci-pci 0000:00:13.0: irq 18, io mem 0xf7f01000
[ 4.167922] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.167931] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.167936] usb usb5: Product: OHCI PCI host controller
[ 4.167940] usb usb5: Manufacturer: Linux 4.16.5-gnu-1 ohci_hcd
[ 4.167944] usb usb5: SerialNumber: 0000:00:13.0
[ 4.168773] hub 5-0:1.0: USB hub found
[ 4.168854] hub 5-0:1.0: 5 ports detected
[ 4.170203] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 4.170222] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 4.170362] ohci-pci 0000:00:16.0: irq 18, io mem 0xf7f02000
[ 4.231253] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.231262] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.231267] usb usb6: Product: OHCI PCI host controller
[ 4.231271] usb usb6: Manufacturer: Linux 4.16.5-gnu-1 ohci_hcd
[ 4.231276] usb usb6: SerialNumber: 0000:00:16.0
[ 4.232095] hub 6-0:1.0: USB hub found
[ 4.232130] hub 6-0:1.0: 4 ports detected
[ 4.340235] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.343718] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.345163] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.347770] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.351423] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.370313] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 4.427028] tsc: Refined TSC clocksource calibration: 1000.001 MHz
[ 4.427049] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe6a1810bf3, max_idle_ns: 440795249465 ns
[ 4.427196] clocksource: Switched to clocksource tsc
[ 4.496919] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.497131] ata1.00: ATA-11: SATA SSD, SBFM01.1, max UDMA/133
[ 4.497138] ata1.00: 31277232 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.497624] ata1.00: configured for UDMA/133
[ 4.498398] scsi 0:0:0:0: Direct-Access ATA SATA SSD 01.1 PQ: 0 ANSI: 5
[ 4.512489] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 4.512542] sd 0:0:0:0: [sda] Write Protect is off
[ 4.512548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.512630] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.514095] sda: sda1 sda2
[ 4.515863] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.519515] usb 3-1: New USB device found, idVendor=058f, idProduct=6366
[ 4.519523] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.519528] usb 3-1: Product: Flash Card Reader/Writer
[ 4.519533] usb 3-1: Manufacturer: Generic
[ 4.519537] usb 3-1: SerialNumber: 058F63666485
[ 4.526335] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 4.530530] scsi host6: usb-storage 3-1:1.0
[ 4.530860] usbcore: registered new interface driver usb-storage
[ 4.532440] usbcore: registered new interface driver uas
[ 4.585450] random: lvm: uninitialized urandom read (4 bytes read)
[ 4.630725] device-mapper: uevent: version 1.0.3
[ 4.630988] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 4.638605] random: lvm: uninitialized urandom read (2 bytes read)
[ 4.954494] random: fast init done
[ 5.548461] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 5.551795] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 8.050185] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.377397] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 8.394103] systemd[1]: Detected architecture x86-64.
[ 8.400303] systemd[1]: Set hostname to <apu1>.
[ 8.765601] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.768880] systemd[1]: Created slice system-netctl.slice.
[ 8.769093] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.769424] systemd[1]: Listening on Journal Socket.
[ 8.769794] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.772912] systemd[1]: Mounting Huge Pages File System...
[ 8.773104] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.773708] systemd[1]: Listening on udev Control Socket.
[ 8.774017] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.777464] systemd[1]: Mounting Kernel Debug File System...
[ 8.777943] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.778549] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.778685] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.778928] systemd[1]: Listening on udev Kernel Socket.
[ 8.779686] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.317113] systemd-journald[230]: Received request to flush runtime journal from PID 1
[ 9.497679] acpi_cpufreq: overriding BIOS provided _PSD data
[ 9.537565] rtc_cmos 00:00: RTC can wake from S4
[ 9.542560] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 9.542686] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 9.562866] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.676995] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.678117] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0x (ptrval), 00:0d:b9:49:7b:a8, XID 0c200000 IRQ 29
[ 9.678124] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.678810] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 9.678826] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 9.679317] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 9.693541] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.694672] r8169 0000:02:00.0 eth1: RTL8168e/8111e at 0x (ptrval), 00:0d:b9:49:7b:a9, XID 0c200000 IRQ 30
[ 9.694679] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.707140] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 9.707430] sp5100-tco sp5100-tco: I/O address 0x0cd6 already in use
[ 9.710209] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.715009] r8169 0000:03:00.0 eth2: RTL8168e/8111e at 0x (ptrval), 00:0d:b9:49:7b:aa, XID 0c200000 IRQ 31
[ 9.715017] r8169 0000:03:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.737974] sp5100-tco: probe of sp5100-tco failed with error -16
[ 9.745315] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 9.850317] Unknown PC Engines board: APU1
[ 10.069055] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.144475] r8169 0000:01:00.0 pe0_left: renamed from eth0
[ 10.185174] r8169 0000:02:00.0 pe0_middle: renamed from eth1
[ 10.211721] r8169 0000:03:00.0 pe0_right: renamed from eth2
[ 10.399649] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 10.432229] lan0: port 1(pe0_middle) entered blocking state
[ 10.432283] lan0: port 1(pe0_middle) entered disabled state
[ 10.432483] device pe0_middle entered promiscuous mode
[ 10.439873] wan0: port 1(pe0_right) entered blocking state
[ 10.439930] wan0: port 1(pe0_right) entered disabled state
[ 10.440281] device pe0_right entered promiscuous mode
[ 10.475277] 0000:02:00.0: Missing Free firmware (non-Free firmware loading is disabled)
[ 10.520904] r8169 0000:02:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2
[ 10.520922] r8169 0000:02:00.0 pe0_middle: unable to load firmware patch /*(DEBLOBBED)*/ (-2)
[ 10.563977] r8169 0000:02:00.0 pe0_middle: link down
[ 10.564000] r8169 0000:02:00.0 pe0_middle: link down
[ 10.564182] IPv6: ADDRCONF(NETDEV_UP): pe0_middle: link is not ready
[ 10.565790] lan0: port 2(pe0_left) entered blocking state
[ 10.572103] lan0: port 2(pe0_left) entered disabled state
[ 10.572481] device pe0_left entered promiscuous mode
[ 10.584273] 0000:03:00.0: Missing Free firmware (non-Free firmware loading is disabled)
[ 10.601171] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 10.634275] r8169 0000:03:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2
[ 10.634291] r8169 0000:03:00.0 pe0_right: unable to load firmware patch /*(DEBLOBBED)*/ (-2)
[ 10.654026] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 10.770674] r8169 0000:03:00.0 pe0_right: link down
[ 10.770682] r8169 0000:03:00.0 pe0_right: link down
[ 10.770895] IPv6: ADDRCONF(NETDEV_UP): pe0_right: link is not ready
[ 10.771081] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 10.771087] cfg80211: failed to load regulatory.db
[ 10.774231] 0000:01:00.0: Missing Free firmware (non-Free firmware loading is disabled)
[ 10.853492] r8169 0000:01:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2
[ 10.853510] r8169 0000:01:00.0 pe0_left: unable to load firmware patch /*(DEBLOBBED)*/ (-2)
[ 10.970277] r8169 0000:01:00.0 pe0_left: link down
[ 10.970477] IPv6: ADDRCONF(NETDEV_UP): pe0_left: link is not ready
[ 10.977518] kvm: Nested Virtualization enabled
[ 10.977527] kvm: Nested Paging enabled
[ 11.149016] IPv6: ADDRCONF(NETDEV_UP): wan0: link is not ready
[ 11.267105] 8021q: 802.1Q VLAN Support v1.8
[ 11.397091] IPv6: ADDRCONF(NETDEV_UP): lan0: link is not ready
[ 12.104480] r8169 0000:02:00.0 pe0_middle: link up
[ 12.104507] IPv6: ADDRCONF(NETDEV_CHANGE): pe0_middle: link becomes ready
[ 12.105514] lan0: port 1(pe0_middle) entered blocking state
[ 12.105521] lan0: port 1(pe0_middle) entered forwarding state
[ 12.105746] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
[ 12.318072] random: crng init done
[ 12.573910] ath: EEPROM regdomain: 0x60
[ 12.573917] ath: EEPROM indicates we should expect a direct regpair map
[ 12.573924] ath: Country alpha2 being used: 00
[ 12.573926] ath: Regpair used: 0x60
[ 12.617629] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.619890] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffa330c0c00000, irq=19
[ 12.686281] ath: phy1: Enable LNA combining
[ 12.689372] ath: phy1: ASPM enabled: 0x43
[ 12.689380] ath: EEPROM regdomain: 0x60
[ 12.689382] ath: EEPROM indicates we should expect a direct regpair map
[ 12.689388] ath: Country alpha2 being used: 00
[ 12.689391] ath: Regpair used: 0x60
[ 12.694355] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 12.700242] ieee80211 phy1: Atheros AR9285 Rev:2 mem=0xffffa330c0be0000, irq=16
[ 12.715028] ath9k 0000:06:00.0 pw1: renamed from wlan1
[ 12.742001] ath9k 0000:04:00.0 pw0: renamed from wlan0
[ 13.199901] r8169 0000:03:00.0 pe0_right: link up
[ 13.199927] IPv6: ADDRCONF(NETDEV_CHANGE): pe0_right: link becomes ready
[ 13.200889] wan0: port 1(pe0_right) entered blocking state
[ 13.200895] wan0: port 1(pe0_right) entered forwarding state
[ 13.201350] IPv6: ADDRCONF(NETDEV_CHANGE): wan0: link becomes ready
[ 23.735504] tun: Universal TUN/TAP device driver, 1.6