blob: eebd92e5045d42cb6c09eb6794f9dcea9bccf02e [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-8-686 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000f7b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000f7b3000-0x000000000f7dffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: PC Engines ALIX.2C/ALIX.2C, BIOS 4.8-1785-g672d5ad20b 10/14/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xf7b3 max_arch_pfn = 0x100000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x05bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x0592e000, 0x0592efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x0e1dd000-0x0f229fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20160831/tbxfroot-244)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 247MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0f7b3000
[ 0.000000] low ram: 0 - 0f7b3000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000000f7b2fff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000000f7b2fff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000f7b2fff]
[ 0.000000] On node 0 totalpages: 63313
[ 0.000000] free_area_init_node: node 0, pgdat c57ce6c0, node_mem_map cf585024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 522 pages used for memmap
[ 0.000000] Normal zone: 59315 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x0f7e0000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 19 pages/cpu @cf56f000 s47948 r0 d29876 u77824
[ 0.000000] pcpu-alloc: s47948 r0 d29876 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62755
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-686 root=UUID=48a374e3-a4eb-4552-b406-b1afe613f233 ro console=ttyS0,38400N8 quiet
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 224548K/253252K available (5738K kernel code, 644K rwdata, 1708K rodata, 720K init, 452K bss, 28704K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xcffb3000 - 0xff7fe000 ( 760 MB)
lowmem : 0xc0000000 - 0xcf7b3000 ( 247 MB)
.init : 0xc57eb000 - 0xc589f000 ( 720 kB)
.data : 0xc559ad74 - 0xc57e9380 (2361 kB)
.text : 0xc5000000 - 0xc559ad74 (5739 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=cdc2e000 soft=cdc30000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 498.073 MHz processor
[ 0.004032] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.14 BogoMIPS (lpj=1992292)
[ 0.004051] pid_max: default: 32768 minimum: 301
[ 0.004435] Security Framework initialized
[ 0.004444] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.004483] AppArmor: AppArmor disabled by boot time parameter
[ 0.004622] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.004635] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008773] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.008785] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.008800] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 0.012016] Spectre V2 : Mitigation: Full generic retpoline
[ 0.012023] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.012029] Speculative Store Bypass: Vulnerable
[ 0.034220] Freeing SMP alternatives memory: 24K
[ 0.041022] ftrace: allocating 23770 entries in 47 pages
[ 0.136343] smpboot: Max logical packages: 1
[ 0.136354] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.136359] smpboot: SMP motherboard not detected
[ 0.136364] smpboot: SMP disabled
[ 0.136370] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.136377] Performance Events: no PMU driver, software events only.
[ 0.140943] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.140951] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 0.141046] x86: Booted up 1 node, 1 CPUs
[ 0.141057] smpboot: Total of 1 processors activated (996.14 BogoMIPS)
[ 0.141812] devtmpfs: initialized
[ 0.144204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.144225] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.144365] pinctrl core: initialized pinctrl subsystem
[ 0.145409] NET: Registered protocol family 16
[ 0.147435] cpuidle: using governor ladder
[ 0.147443] cpuidle: using governor menu
[ 0.147653] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.151945] PCI: PCI BIOS revision 2.10 entry at 0xffa40, last bus=0
[ 0.151952] PCI: Using configuration type 1 for base access
[ 0.162075] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.163720] ACPI: Interpreter disabled.
[ 0.164206] vgaarb: loaded
[ 0.164787] PCI: Probing PCI hardware
[ 0.164796] PCI: root bus 00: using default resources
[ 0.164805] PCI: Probing PCI hardware (bus 00)
[ 0.165132] PCI host bridge to bus 0000:00
[ 0.165166] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.165182] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.165196] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.165343] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[ 0.165482] pci 0000:00:01.0: reg 0x10: [io 0xac1c-0xac1f]
[ 0.166702] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[ 0.166942] pci 0000:00:01.2: reg 0x10: [mem 0xfe010000-0xfe013fff]
[ 0.168627] pci 0000:00:09.0: [1106:3053] type 00 class 0x020000
[ 0.168666] pci 0000:00:09.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.168693] pci 0000:00:09.0: reg 0x14: [mem 0xfe019000-0xfe0190ff]
[ 0.168802] pci 0000:00:09.0: supports D1 D2
[ 0.168816] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169289] pci 0000:00:0a.0: [1106:3053] type 00 class 0x020000
[ 0.169326] pci 0000:00:0a.0: reg 0x10: [io 0x1400-0x14ff]
[ 0.169352] pci 0000:00:0a.0: reg 0x14: [mem 0xfe01a000-0xfe01a0ff]
[ 0.169459] pci 0000:00:0a.0: supports D1 D2
[ 0.169473] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169912] pci 0000:00:0b.0: [1106:3053] type 00 class 0x020000
[ 0.169949] pci 0000:00:0b.0: reg 0x10: [io 0x1800-0x18ff]
[ 0.169975] pci 0000:00:0b.0: reg 0x14: [mem 0xfe01b000-0xfe01b0ff]
[ 0.170082] pci 0000:00:0b.0: supports D1 D2
[ 0.170096] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170635] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[ 0.170945] pci 0000:00:0f.0: reg 0x10: [io 0x24b0-0x24b7]
[ 0.171204] pci 0000:00:0f.0: reg 0x14: [io 0x1c00-0x1cff]
[ 0.171462] pci 0000:00:0f.0: reg 0x18: [io 0x2400-0x243f]
[ 0.171721] pci 0000:00:0f.0: reg 0x1c: [io 0x2480-0x249f]
[ 0.172029] pci 0000:00:0f.0: reg 0x20: [io 0x2000-0x207f]
[ 0.172306] pci 0000:00:0f.0: reg 0x24: [io 0x2440-0x247f]
[ 0.173261] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[ 0.174163] pci 0000:00:0f.2: reg 0x20: [io 0x24a0-0x24af]
[ 0.174569] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.174583] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.174598] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.174612] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.175305] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[ 0.175626] pci 0000:00:0f.4: reg 0x10: [mem 0xfe016000-0xfe016fff]
[ 0.177143] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.177853] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[ 0.178168] pci 0000:00:0f.5: reg 0x10: [mem 0xfe017000-0xfe017fff]
[ 0.179642] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.180332] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.180873] PCI: pci_cache_line_size set to 32 bytes
[ 0.181198] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.181210] e820: reserve RAM buffer [mem 0x0f7b3000-0x0fffffff]
[ 0.182756] clocksource: Switched to clocksource pit
[ 0.249026] VFS: Disk quotas dquot_6.6.0
[ 0.249139] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.249802] pnp: PnP ACPI: disabled
[ 0.249813] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.249963] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6760
[ 0.249978] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xd153, dseg 0xf0000
[ 0.254499] PnPBIOS: dev_node_info: function not supported on this system
[ 0.258896] PnPBIOS: Unable to get node info. Aborting.
[ 0.281078] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.281098] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.281410] NET: Registered protocol family 2
[ 0.282570] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.282623] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.282681] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.282801] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.282832] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.283072] NET: Registered protocol family 1
[ 0.283863] PCI: CLS 64 bytes, default 32
[ 0.284192] Unpacking initramfs...
[ 1.021376] random: fast init done
[ 3.457712] Freeing initrd memory: 16692K
[ 3.458261] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 3.474339] audit: initializing netlink subsys (disabled)
[ 3.474433] audit: type=2000 audit(1539701892.472:1): initialized
[ 3.476470] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 3.476576] zbud: loaded
[ 3.482857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.483057] io scheduler noop registered
[ 3.483065] io scheduler deadline registered
[ 3.483154] io scheduler cfq registered (default)
[ 3.483893] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.483957] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.484126] unchecked MSR access error: RDMSR from 0x179 at rIP: 0xc504378a (native_read_msr+0xa/0x40)
[ 3.484133] c581a0b4 c581d8d8 c588110c cdcd3f84 c581d8f2 cdcd3f10 c540a90b cdcd3f84
[ 3.484169] c3ba0ccf c3ba0ccf c3ba0ccf 00000000 c50004f5 00000006 cf584c6d c574741c
[ 3.484202] 0000009e c57eb51a c5074b86 00000000 cdcf5200 00000001 c5764fb0 00000003
[ 3.484234] Call Trace:
[ 3.484262] [<c581a0b4>] ? efifb_driver_init+0xc/0xc
[ 3.484279] [<c581d8d8>] ? ghes_init+0x176/0x176
[ 3.484296] [<c581d8f2>] ? extlog_init+0x1a/0x30c
[ 3.484315] [<c540a90b>] ? driver_register+0x8b/0xf0
[ 3.484331] [<c50004f5>] ? do_one_initcall+0x45/0x180
[ 3.484352] [<c57eb51a>] ? set_debug_rodata+0xa/0xa
[ 3.484375] [<c5074b86>] ? parse_args+0x2c6/0x580
[ 3.484398] [<c57ebc66>] ? kernel_init_freeable+0x139/0x1b2
[ 3.484416] [<c5591790>] ? rest_init+0x70/0x70
[ 3.484431] [<c55917a0>] ? kernel_init+0x10/0x100
[ 3.484449] [<c50818c1>] ? schedule_tail+0x11/0x50
[ 3.484464] [<c5591790>] ? rest_init+0x70/0x70
[ 3.484485] [<c5597dfc>] ? ret_from_fork+0x30/0x3c
[ 3.484789] isapnp: Scanning for PnP cards...
[ 3.840869] isapnp: No Plug & Play device found
[ 3.841395] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.841876] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a NS16550A
[ 3.842429] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
[ 3.844683] Linux agpgart interface v0.103
[ 3.846882] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.855162] i8042: No controller found
[ 3.855763] mousedev: PS/2 mouse device common for all mice
[ 3.856485] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 3.856549] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 3.856736] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.858348] NET: Registered protocol family 10
[ 3.859653] mip6: Mobile IPv6
[ 3.859665] NET: Registered protocol family 17
[ 3.859681] mpls_gso: MPLS GSO support
[ 3.859690] mce: Unable to init device /dev/mcelog (rc: -5)
[ 3.864757] Using IPI No-Shortcut mode
[ 3.865971] registered taskstats version 1
[ 3.866033] zswap: loaded using pool lzo/zbud
[ 3.866308] ima: No TPM chip found, activating TPM-bypass!
[ 3.866320] ima: Allocated hash algorithm: sha256
[ 3.867350] rtc_cmos rtc_cmos: setting system clock to 2018-10-16 14:58:14 UTC (1539701894)
[ 3.867576] PM: Hibernation image not present or could not be loaded.
[ 3.868654] Freeing unused kernel memory: 720K
[ 3.869053] Write protecting the kernel text: 5740k
[ 3.869359] Write protecting the kernel read-only data: 1716k
[ 3.989423] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.994420] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.994577] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 4.133155] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 4.159107] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management Adapter) at 0x11000, 00:0d:b9:13:5b:e4, IRQ 10
[ 4.159907] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c1e1
[ 4.220289] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management Adapter) at 0x11400, 00:0d:b9:13:5b:e5, IRQ 11
[ 4.221090] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[ 4.224363] SCSI subsystem initialized
[ 4.263981] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management Adapter) at 0x11800, 00:0d:b9:13:5b:e6, IRQ 9
[ 4.264781] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[ 4.293733] usbcore: registered new interface driver usbfs
[ 4.293875] usbcore: registered new interface driver hub
[ 4.295896] usbcore: registered new device driver usb
[ 4.300976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.303071] ehci-pci: EHCI PCI platform driver
[ 4.303478] ehci-pci 0000:00:0f.5: EHCI Host Controller
[ 4.303524] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 4.303799] ehci-pci 0000:00:0f.5: cache line size of 64 is not supported
[ 4.303843] ehci-pci 0000:00:0f.5: irq 9, io mem 0xfe017000
[ 4.313377] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.317686] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 4.318189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.318206] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.318219] usb usb1: Product: EHCI Host Controller
[ 4.318233] usb usb1: Manufacturer: Linux 4.9.0-8-686 ehci_hcd
[ 4.318246] usb usb1: SerialNumber: 0000:00:0f.5
[ 4.319478] hub 1-0:1.0: USB hub found
[ 4.319531] hub 1-0:1.0: 4 ports detected
[ 4.321873] libata version 3.00 loaded.
[ 4.327684] pata_amd 0000:00:0f.2: version 0.4.1
[ 4.331289] ohci-pci: OHCI PCI platform driver
[ 4.348924] scsi host0: pata_amd
[ 4.354972] scsi host1: pata_amd
[ 4.355594] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24a0 irq 14
[ 4.355606] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24a8 irq 15
[ 4.356198] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[ 4.356242] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 4.356364] ohci-pci 0000:00:0f.4: irq 9, io mem 0xfe016000
[ 4.478895] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe5bde59910, max_idle_ns: 881590495387 ns
[ 4.478988] clocksource: Switched to clocksource tsc
[ 4.520801] ata1.00: CFA: SanDisk SDCFH-2048, HDX 4.09, max MWDMA2
[ 4.520818] ata1.00: 4001760 sectors, multi 0: LBA
[ 4.521665] ata1.00: configured for MWDMA2
[ 4.526246] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-20 4.09 PQ: 0 ANSI: 5
[ 4.528287] ata2: port disabled--ignoring
[ 4.536447] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.536467] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.536480] usb usb2: Product: OHCI PCI host controller
[ 4.536494] usb usb2: Manufacturer: Linux 4.9.0-8-686 ohci_hcd
[ 4.536507] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.541887] hub 2-0:1.0: USB hub found
[ 4.543466] hub 2-0:1.0: 4 ports detected
[ 4.682389] sd 0:0:0:0: [sda] 4001760 512-byte logical blocks: (2.05 GB/1.91 GiB)
[ 4.682707] sd 0:0:0:0: [sda] Write Protect is off
[ 4.682728] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.682868] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.687707] sda: sda1 sda2 < sda5 >
[ 4.695032] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 5.175587] PM: Starting manual resume from disk
[ 5.175608] PM: Hibernation image partition 8:5 present
[ 5.175614] PM: Looking for hibernation image.
[ 5.176787] PM: Image not found (code -22)
[ 5.176797] PM: Hibernation image not present or could not be loaded.
[ 5.691718] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.328116] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 6.478347] usb 1-2: New USB device found, idVendor=174c, idProduct=55aa
[ 6.478366] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 6.478379] usb 1-2: Product: MEDION HDDrive-n-GO
[ 6.478392] usb 1-2: Manufacturer: MEDION
[ 6.478405] usb 1-2: SerialNumber: 203000000000000067B7
[ 6.963041] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.018111] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 7.018920] systemd[1]: Detected architecture x86.
[ 7.020477] systemd[1]: Set hostname to <mesum-server>.
[ 7.947764] systemd[1]: Listening on Journal Socket.
[ 7.949134] systemd[1]: Listening on Journal Audit Socket.
[ 7.950501] systemd[1]: Created slice User and Session Slice.
[ 7.950907] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.951388] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.952665] systemd[1]: Created slice System Slice.
[ 7.953931] systemd[1]: Created slice system-getty.slice.
[ 8.176775] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.336956] lp: driver loaded but no devices found
[ 8.385414] ppdev: user-space parallel port driver
[ 9.235890] random: crng init done
[ 9.235905] random: 7 urandom warning(s) missed due to ratelimiting
[ 10.244500] cs5535-gpio cs5535-gpio: reserved resource region [io 0x1c00-0x1cff]
[ 10.246110] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 10.253100] AMD Geode RNG detected
[ 10.372236] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.373072] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[ 10.404357] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 10.752940] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 10.777190] usb-storage 1-2:1.0: Quirks match for vid 174c pid 55aa: 400000
[ 10.784248] scsi host2: usb-storage 1-2:1.0
[ 10.785071] usbcore: registered new interface driver usb-storage
[ 10.811329] usbcore: registered new interface driver uas
[ 10.876975] systemd-journald[153]: Received request to flush runtime journal from PID 1
[ 11.289402] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
[ 11.319771] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x2400-0x243f]
[ 11.319797] cs5535-mfgpt cs5535-mfgpt: 2 MFGPT timers available
[ 11.823564] scsi 2:0:0:0: Direct-Access SAMSUNG HN-M101MBB 2AR1 PQ: 0 ANSI: 5
[ 11.841107] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 11.841634] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 11.842217] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.842238] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 11.843343] sd 2:0:0:0: [sdb] No Caching mode page found
[ 11.859368] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 12.129147] sdb: sdb1
[ 12.135753] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 18.764377] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro