blob: 328dc545741774fee0cd6d55df7667cbbe3f18f7 [file] [log] [blame]
[ 0.000000] Linux version 5.3.7-arch1-1.0-ARCH (builduser@erich) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Fri Oct 18 14:22:10 CEST 2019
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] zhaoxin Shanghai
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f34ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f350000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO 17075DG/17075DG, BIOS CBET4000 4.12-1204-ge4aab352ee 07/07/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1828.738 MHz processor
[ 0.003838] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.003841] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.003848] last_pfn = 0x7f350 max_arch_pfn = 0x100000
[ 0.003858] MTRR default type: uncachable
[ 0.003859] MTRR fixed ranges enabled:
[ 0.003862] 00000-9FFFF write-back
[ 0.003864] A0000-BFFFF uncachable
[ 0.003866] C0000-FFFFF write-back
[ 0.003868] MTRR variable ranges enabled:
[ 0.003871] 0 base 000000000 mask 080000000 write-back
[ 0.003873] 1 base 07F400000 mask 0FFC00000 uncachable
[ 0.003875] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.003878] 3 base 080000000 mask 0F0000000 write-combining
[ 0.003879] 4 disabled
[ 0.003880] 5 disabled
[ 0.003882] 6 disabled
[ 0.003883] 7 disabled
[ 0.004858] x86/PAT: PAT not supported by CPU.
[ 0.005047] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.010247] found SMP MP-table at [mem 0x000f6080-0x000f608f]
[ 0.010442] check: Scanning 1 areas for low memory corruption
[ 0.010444] initial memory mapped: [mem 0x00000000-0x1dffffff]
[ 0.010483] BRK [0x1de04000, 0x1de04fff] PGTABLE
[ 0.010498] BRK [0x1de05000, 0x1de06fff] PGTABLE
[ 0.010506] RAMDISK: [mem 0x355c9000-0x36adbfff]
[ 0.010510] Allocated new RAMDISK: [mem 0x340b6000-0x355c8ccf]
[ 0.030786] Move RAMDISK from [mem 0x355c9000-0x36adbccf] to [mem 0x340b6000-0x355c8ccf]
[ 0.030799] ACPI: Early table checksum verification disabled
[ 0.030808] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4)
[ 0.030815] ACPI: XSDT 0x000000007F3520E0 00004C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.030826] ACPI: FACP 0x000000007F355340 000114 (v06 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.030838] ACPI: DSDT 0x000000007F352280 0030B5 (v02 COREv4 COREBOOT 20090419 INTL 20190703)
[ 0.030845] ACPI: FACS 0x000000007F352240 000040
[ 0.030850] ACPI: FACS 0x000000007F352240 000040
[ 0.030855] ACPI: SSDT 0x000000007F355460 000813 (v02 COREv4 COREBOOT 0000002A CORE 20190703)
[ 0.030862] ACPI: MCFG 0x000000007F355C80 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.030868] ACPI: APIC 0x000000007F355CC0 000068 (v03 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.030875] ACPI: HPET 0x000000007F355D30 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.030897] ACPI: Local APIC address 0xfee00000
[ 0.030904] 1167MB HIGHMEM available.
[ 0.030908] 867MB LOWMEM available.
[ 0.030909] mapped low ram: 0 - 363fe000
[ 0.030911] low ram: 0 - 363fe000
[ 0.030921] BRK [0x1de07000, 0x1de07fff] PGTABLE
[ 0.030927] Zone ranges:
[ 0.030929] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.030931] Normal [mem 0x0000000001000000-0x00000000363fdfff]
[ 0.030933] HighMem [mem 0x00000000363fe000-0x000000007f34ffff]
[ 0.030936] Movable zone start for each node
[ 0.030937] Early memory node ranges
[ 0.030939] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.030940] node 0: [mem 0x0000000000100000-0x000000007f34ffff]
[ 0.030943] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f34ffff]
[ 0.030946] On node 0 totalpages: 520942
[ 0.040498] DMA zone: 40 pages used for memmap
[ 0.040499] DMA zone: 0 pages reserved
[ 0.040502] DMA zone: 3998 pages, LIFO batch:0
[ 0.040639] Normal zone: 2130 pages used for memmap
[ 0.040640] Normal zone: 218110 pages, LIFO batch:63
[ 0.047699] HighMem zone: 298834 pages, LIFO batch:63
[ 0.057453] Using APIC driver default
[ 0.057466] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff]
[ 0.057831] ACPI: PM-Timer IO Port: 0x508
[ 0.057835] ACPI: Local APIC address 0xfee00000
[ 0.057848] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.057849] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.057865] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.057869] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.057872] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.057875] ACPI: IRQ0 used by override.
[ 0.057877] ACPI: IRQ9 used by override.
[ 0.057881] Using ACPI (MADT) for SMP configuration information
[ 0.057883] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.057893] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.057911] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.057914] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.057915] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.057917] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.057922] [mem 0x80000000-0xefffffff] available for PCI devices
[ 0.057923] Booting paravirtualized kernel on bare hardware
[ 0.057930] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.057939] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.058165] percpu: Embedded 32 pages/cpu s102220 r0 d28852 u131072
[ 0.058175] pcpu-alloc: s102220 r0 d28852 u131072 alloc=32*4096
[ 0.058177] pcpu-alloc: [0] 0 [0] 1
[ 0.058206] Built 1 zonelists, mobility grouping on. Total pages: 518772
[ 0.058209] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/matrix-rootvol rw cryptdevice=/dev/sda1:root verbose iomem=relaxed
[ 0.058615] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.058727] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.058731] BRK [0x1de08000, 0x1de08fff] PGTABLE
[ 0.058734] BRK [0x1de09000, 0x1de09fff] PGTABLE
[ 0.058760] Initializing CPU#0
[ 0.058767] mem auto-init: stack:byref_all, heap alloc:off, heap free:off
[ 0.058774] Initializing HighMem for node 0 (000363fe:0007f350)
[ 0.179841] Initializing Movable for node 0 (00000000:00000000)
[ 0.187643] Memory: 2026340K/2083768K available (8287K kernel code, 728K rwdata, 3384K rodata, 856K init, 480K bss, 57428K reserved, 0K cma-reserved, 1195336K highmem)
[ 0.187650] virtual kernel memory layout:
fixmap : 0xffab7000 - 0xfffff000 (5408 kB)
cpu_entry : 0xfec00000 - 0xff581000 (9732 kB)
pkmap : 0xfe400000 - 0xfe800000 (4096 kB)
vmalloc : 0xf6bfe000 - 0xfe3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf63fe000 ( 867 MB)
.init : 0xddc36000 - 0xddd0c000 ( 856 kB)
.data : 0xdd817ea4 - 0xddc252c0 (4149 kB)
.text : 0xdd000000 - 0xdd817ea4 (8287 kB)
[ 0.187652] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.187679] random: get_random_u32 called from __kmem_cache_create+0x31/0x420 with crng_init=0
[ 0.188000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.188018] ftrace: allocating 34529 entries in 68 pages
[ 0.212054] rcu: Preemptible hierarchical RCU implementation.
[ 0.212056] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.212058] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.212060] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.212061] Tasks RCU enabled.
[ 0.212063] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.212064] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.217490] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 0.217685] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.220401] Console: colour VGA+ 80x25
[ 0.220408] printk: console [tty0] enabled
[ 0.220421] ACPI: Core revision 20190703
[ 0.220547] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.220567] APIC: Switch to symmetric I/O mode setup
[ 0.220571] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.221051] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.237235] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1a5c355e8ee, max_idle_ns: 440795244925 ns
[ 0.237243] Calibrating delay loop (skipped), value calculated using timer frequency.. 3658.87 BogoMIPS (lpj=6095793)
[ 0.237247] pid_max: default: 32768 minimum: 301
[ 0.237327] LSM: Security Framework initializing
[ 0.237333] Yama: becoming mindful.
[ 0.237372] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.237379] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.237713] *** VALIDATE proc ***
[ 0.237808] *** VALIDATE cgroup1 ***
[ 0.237811] *** VALIDATE cgroup2 ***
[ 0.237849] Disabled fast string operations
[ 0.237882] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.237889] process: using mwait in idle threads
[ 0.237898] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.237899] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[ 0.237903] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.237906] Spectre V2 : Mitigation: Full generic retpoline
[ 0.237908] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.237909] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[ 0.237913] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.238074] Freeing SMP alternatives memory: 28K
[ 0.345267] smpboot: CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz (family: 0x6, model: 0xe, stepping: 0x8)
[ 0.363920] Performance Events: Core events, core PMU driver.
[ 0.363928] ... version: 1
[ 0.363929] ... bit width: 40
[ 0.363930] ... generic registers: 2
[ 0.363932] ... value mask: 000000ffffffffff
[ 0.363933] ... max period: 000000007fffffff
[ 0.363935] ... fixed-purpose events: 0
[ 0.363936] ... event mask: 0000000000000003
[ 0.370578] rcu: Hierarchical SRCU implementation.
[ 0.393934] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.400585] smp: Bringing up secondary CPUs ...
[ 0.440608] x86: Booting SMP configuration:
[ 0.440610] .... node #0, CPUs: #1
[ 0.006188] Initializing CPU#1
[ 0.006188] Disabled fast string operations
[ 0.443143] smp: Brought up 1 node, 2 CPUs
[ 0.443143] smpboot: Max logical packages: 1
[ 0.443143] smpboot: Total of 2 processors activated (7317.74 BogoMIPS)
[ 0.444144] devtmpfs: initialized
[ 0.444324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.444324] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.444324] pinctrl core: initialized pinctrl subsystem
[ 0.444324] PM: RTC time: 23:54:55, date: 2020-07-07
[ 0.444408] NET: Registered protocol family 16
[ 0.444671] audit: initializing netlink subsys (disabled)
[ 0.444686] audit: type=2000 audit(1594166094.223:1): state=initialized audit_enabled=0 res=1
[ 0.444686] cpuidle: using governor ladder
[ 0.444686] cpuidle: using governor menu
[ 0.444686] ACPI: bus type PCI registered
[ 0.444686] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.444686] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.444686] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.444686] PCI: Using MMCONFIG for extended config space
[ 0.444686] PCI: Using configuration type 1 for base access
[ 0.450041] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.454155] ACPI: Added _OSI(Module Device)
[ 0.454158] ACPI: Added _OSI(Processor Device)
[ 0.454160] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.454162] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.454164] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.454167] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.454169] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.462141] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.464546] ACPI: EC: EC started
[ 0.464548] ACPI: EC: interrupt blocked
[ 0.465565] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.465569] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.465572] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.465573] ACPI: Interpreter enabled
[ 0.465615] ACPI: (supports S0 S3 S4 S5)
[ 0.465618] ACPI: Using IOAPIC for interrupt routing
[ 0.465664] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.466063] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.476748] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[ 0.477071] ACPI: Power Resource [FPWR] (off)
[ 0.477814] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.477824] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.477953] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.477959] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.478094] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6fff])
[ 0.478641] PCI host bridge to bus 0000:00
[ 0.478644] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.478647] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.478650] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.478653] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.478655] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.478658] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.478661] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.478664] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.478666] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.478669] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.478672] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.478674] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.478677] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.478680] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.478682] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.478685] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.478688] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.478692] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.478710] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.478962] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.478978] pci 0000:00:02.0: reg 0x10: [mem 0x94300000-0x9437ffff]
[ 0.478986] pci 0000:00:02.0: reg 0x14: [io 0x10b0-0x10b7]
[ 0.478993] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.479001] pci 0000:00:02.0: reg 0x1c: [mem 0x94400000-0x9443ffff]
[ 0.479221] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.479235] pci 0000:00:02.1: reg 0x10: [mem 0x94380000-0x943fffff]
[ 0.479520] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.479556] pci 0000:00:1b.0: reg 0x10: [mem 0x94440000-0x94443fff 64bit]
[ 0.479682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.479913] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.480171] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.480404] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.480551] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.480791] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.480929] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.481161] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.481299] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.481532] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.481596] pci 0000:00:1d.0: reg 0x20: [io 0x1000-0x101f]
[ 0.481826] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.481890] pci 0000:00:1d.1: reg 0x20: [io 0x1020-0x103f]
[ 0.482120] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.482183] pci 0000:00:1d.2: reg 0x20: [io 0x1040-0x105f]
[ 0.482413] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.482477] pci 0000:00:1d.3: reg 0x20: [io 0x1060-0x107f]
[ 0.482717] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.482747] pci 0000:00:1d.7: reg 0x10: [mem 0x94444000-0x944443ff]
[ 0.482857] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.483070] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.483361] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.483488] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.483495] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.483500] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.483504] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.483509] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.483739] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.483763] pci 0000:00:1f.1: reg 0x10: [io 0x10b8-0x10bf]
[ 0.483776] pci 0000:00:1f.1: reg 0x14: [io 0x10d8-0x10db]
[ 0.483788] pci 0000:00:1f.1: reg 0x18: [io 0x10c0-0x10c7]
[ 0.483801] pci 0000:00:1f.1: reg 0x1c: [io 0x10dc-0x10df]
[ 0.483813] pci 0000:00:1f.1: reg 0x20: [io 0x10a0-0x10af]
[ 0.483840] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.483843] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.483845] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.483848] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.484072] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.484100] pci 0000:00:1f.2: reg 0x10: [io 0x10c8-0x10cf]
[ 0.484113] pci 0000:00:1f.2: reg 0x14: [io 0x10e0-0x10e3]
[ 0.484125] pci 0000:00:1f.2: reg 0x18: [io 0x10d0-0x10d7]
[ 0.484138] pci 0000:00:1f.2: reg 0x1c: [io 0x10e4-0x10e7]
[ 0.484151] pci 0000:00:1f.2: reg 0x20: [io 0x1080-0x108f]
[ 0.484164] pci 0000:00:1f.2: reg 0x24: [mem 0x94445000-0x944453ff]
[ 0.484226] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.484431] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.484515] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.484844] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[ 0.484900] pci 0000:01:00.0: reg 0x10: [mem 0x94100000-0x9411ffff]
[ 0.484943] pci 0000:01:00.0: reg 0x18: [io 0x4000-0x401f]
[ 0.485160] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.485313] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.485333] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.485339] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.485345] pci 0000:00:1c.0: bridge window [mem 0x94100000-0x941fffff]
[ 0.485353] pci 0000:00:1c.0: can't handle bridge window above 4GB (bus address 0xfffffffffff00000)
[ 0.485517] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.485571] pci 0000:02:00.0: reg 0x10: [mem 0x94200000-0x9420ffff 64bit]
[ 0.485771] pci 0000:02:00.0: supports D1
[ 0.485773] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.485943] pci 0000:00:1c.1: ASPM: current common clock configuration is broken, reconfiguring
[ 0.497275] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.497285] pci 0000:00:1c.1: bridge window [mem 0x94200000-0x942fffff]
[ 0.497293] pci 0000:00:1c.1: can't handle bridge window above 4GB (bus address 0xfffffffffff00000)
[ 0.497428] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.497442] pci 0000:00:1c.2: can't handle bridge window above 4GB (bus address 0xfffffffffff00000)
[ 0.497579] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.497594] pci 0000:00:1c.3: can't handle bridge window above 4GB (bus address 0xfffffffffff00000)
[ 0.497682] pci_bus 0000:05: extended config space not accessible
[ 0.497863] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
[ 0.497890] pci 0000:05:00.0: reg 0x10: [mem 0x92000000-0x92000fff]
[ 0.497938] pci 0000:05:00.0: supports D1 D2
[ 0.497940] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.498077] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
[ 0.498101] pci 0000:05:00.1: reg 0x10: [mem 0x92001000-0x920017ff]
[ 0.498211] pci 0000:05:00.1: supports D1 D2
[ 0.498214] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.498332] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
[ 0.498357] pci 0000:05:00.2: reg 0x10: [mem 0x92002000-0x920020ff]
[ 0.498467] pci 0000:05:00.2: supports D1 D2
[ 0.498469] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.498643] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[ 0.498649] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.498655] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x920fffff]
[ 0.498663] pci 0000:00:1e.0: bridge window [mem 0x92100000-0x940fffff 64bit pref]
[ 0.498666] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.498669] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.498672] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.498675] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.498678] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.498680] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.498683] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.498686] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.498689] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.498691] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.498694] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.498697] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.498699] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.498702] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.498705] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.498708] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.498711] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.498745] pci_bus 0000:06: extended config space not accessible
[ 0.498781] pci_bus 0000:06: busn_res: [bus 06] end can not be updated to 09
[ 0.498787] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 09
[ 0.498827] pci_bus 0000:00: on NUMA node 0
[ 0.499136] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.499292] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.499445] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.499598] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.499751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.499904] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.500058] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.500211] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.503913] ACPI: EC: interrupt unblocked
[ 0.503913] ACPI: EC: event unblocked
[ 0.503913] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.503913] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[ 0.503930] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.503930] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.503937] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.503938] vgaarb: loaded
[ 0.504242] ACPI: bus type USB registered
[ 0.504279] usbcore: registered new interface driver usbfs
[ 0.504294] usbcore: registered new interface driver hub
[ 0.504324] usbcore: registered new device driver usb
[ 0.504324] pps_core: LinuxPPS API ver. 1 registered
[ 0.504324] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.504324] PTP clock support registered
[ 0.504324] EDAC MC: Ver: 3.0.0
[ 0.504330] PCI: Using ACPI for IRQ routing
[ 0.506111] PCI: pci_cache_line_size set to 64 bytes
[ 0.506206] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.506208] e820: reserve RAM buffer [mem 0x7f350000-0x7fffffff]
[ 0.507242] NetLabel: Initializing
[ 0.507242] NetLabel: domain hash size = 128
[ 0.507242] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.507242] NetLabel: unlabeled traffic allowed by default
[ 0.507369] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.507374] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.507380] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.510676] clocksource: Switched to clocksource tsc-early
[ 0.539400] VFS: Disk quotas dquot_6.6.0
[ 0.539435] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.539483] *** VALIDATE hugetlbfs ***
[ 0.539578] pnp: PnP ACPI init
[ 0.539837] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.539841] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.539844] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.539847] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.539851] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.539854] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.539857] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.539860] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.539872] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.540956] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.540966] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.541085] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.541088] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.541092] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.541100] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.541153] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.541232] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.541301] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.541377] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.541462] pnp: PnP ACPI: found 7 devices
[ 0.545019] thermal_sys: Registered thermal governor 'fair_share'
[ 0.545020] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.545022] thermal_sys: Registered thermal governor 'step_wise'
[ 0.545024] thermal_sys: Registered thermal governor 'user_space'
[ 0.545025] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.579598] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.579672] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.579702] pci 0000:00:1c.0: BAR 15: assigned [mem 0x94500000-0x946fffff 64bit pref]
[ 0.579706] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.579711] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.579719] pci 0000:00:1c.0: bridge window [mem 0x94100000-0x941fffff]
[ 0.579724] pci 0000:00:1c.0: bridge window [mem 0x94500000-0x946fffff 64bit pref]
[ 0.579732] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.579740] pci 0000:00:1c.1: bridge window [mem 0x94200000-0x942fffff]
[ 0.579751] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.579766] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.579795] pci 0000:05:00.0: BAR 15: assigned [mem 0x98000000-0x9bffffff pref]
[ 0.579804] pci 0000:05:00.0: BAR 16: assigned [mem 0x9c000000-0x9fffffff]
[ 0.579808] pci 0000:05:00.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.579811] pci 0000:05:00.0: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.579814] pci 0000:05:00.0: CardBus bridge to [bus 06]
[ 0.579817] pci 0000:05:00.0: bridge window [io 0x2000-0x20ff]
[ 0.579822] pci 0000:05:00.0: bridge window [io 0x2400-0x24ff]
[ 0.579828] pci 0000:05:00.0: bridge window [mem 0x98000000-0x9bffffff pref]
[ 0.579834] pci 0000:05:00.0: bridge window [mem 0x9c000000-0x9fffffff]
[ 0.579839] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[ 0.579843] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.579850] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x920fffff]
[ 0.579855] pci 0000:00:1e.0: bridge window [mem 0x92100000-0x940fffff 64bit pref]
[ 0.579865] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.579867] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.579870] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.579873] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.579876] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.579878] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.579881] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.579884] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.579887] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.579889] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.579892] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.579895] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.579898] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.579900] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.579903] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.579906] pci_bus 0000:00: resource 19 [mem 0x80000000-0xfebfffff window]
[ 0.579909] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.579911] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.579914] pci_bus 0000:01: resource 1 [mem 0x94100000-0x941fffff]
[ 0.579917] pci_bus 0000:01: resource 2 [mem 0x94500000-0x946fffff 64bit pref]
[ 0.579920] pci_bus 0000:02: resource 1 [mem 0x94200000-0x942fffff]
[ 0.579923] pci_bus 0000:05: resource 0 [io 0x2000-0x3fff]
[ 0.579925] pci_bus 0000:05: resource 1 [mem 0x90000000-0x920fffff]
[ 0.579928] pci_bus 0000:05: resource 2 [mem 0x92100000-0x940fffff 64bit pref]
[ 0.579931] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.579935] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.579937] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.579940] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.579943] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.579945] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.579948] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.579951] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.579953] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.579956] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.579959] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.579962] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.579964] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.579967] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.579970] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.579973] pci_bus 0000:05: resource 19 [mem 0x80000000-0xfebfffff window]
[ 0.579975] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.579978] pci_bus 0000:06: resource 0 [io 0x2000-0x20ff]
[ 0.579981] pci_bus 0000:06: resource 1 [io 0x2400-0x24ff]
[ 0.579984] pci_bus 0000:06: resource 2 [mem 0x98000000-0x9bffffff pref]
[ 0.579986] pci_bus 0000:06: resource 3 [mem 0x9c000000-0x9fffffff]
[ 0.580191] NET: Registered protocol family 2
[ 0.580507] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.580516] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.580543] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.580590] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.580649] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.580663] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.580738] NET: Registered protocol family 1
[ 0.580764] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.583192] PCI: CLS 64 bytes, default 64
[ 0.583266] Trying to unpack rootfs image as initramfs...
[ 1.228409] Freeing initrd memory: 21580K
[ 1.228664] apm: BIOS not found.
[ 1.228744] check: Scanning for low memory corruption every 60 seconds
[ 1.229694] Initialise system trusted keyrings
[ 1.229713] Key type blacklist registered
[ 1.229820] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 1.233185] zbud: loaded
[ 1.244126] Key type asymmetric registered
[ 1.244129] Asymmetric key parser 'x509' registered
[ 1.244155] bounce: pool size: 64 pages
[ 1.244182] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.244275] io scheduler mq-deadline registered
[ 1.244278] io scheduler kyber registered
[ 1.244389] io scheduler bfq registered
[ 1.245332] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ 1.245391] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[ 1.245961] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[ 1.246416] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26
[ 1.246885] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27
[ 1.247186] intel_idle: does not run on family 6 model 14
[ 1.247299] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
[ 1.249104] ACPI: Sleep Button [SLPB]
[ 1.249193] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
[ 1.252441] ACPI: Lid Switch [LID]
[ 1.252539] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.252572] ACPI: Power Button [PWRF]
[ 1.253639] Monitor-Mwait will be used to enter C-1 state
[ 1.253657] Monitor-Mwait will be used to enter C-2 state
[ 1.253672] Monitor-Mwait will be used to enter C-3 state
[ 1.253682] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.253779] clocksource: Switched to clocksource hpet
[ 1.257012] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.257014] ACPI: Thermal Zone [THM0] (50 C)
[ 1.258461] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.258465] ACPI: Thermal Zone [THM1] (54 C)
[ 1.258686] isapnp: Scanning for PnP cards...
[ 1.615713] isapnp: No Plug & Play device found
[ 1.615927] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.637257] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.638959] usbcore: registered new interface driver usbserial_generic
[ 1.638970] usbserial: USB Serial support registered for generic
[ 1.639004] rtc_cmos 00:03: RTC can wake from S4
[ 1.639241] rtc_cmos 00:03: registered as rtc0
[ 1.639278] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.639384] intel_pstate: CPU model not supported
[ 1.639441] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.639927] NET: Registered protocol family 10
[ 1.652057] Segment Routing with IPv6
[ 1.652116] NET: Registered protocol family 17
[ 1.652547] RAS: Correctable Errors collector initialized.
[ 1.652628] microcode: sig=0x6e8, pf=0x20, revision=0x39
[ 1.652744] microcode: Microcode Update Driver: v2.2.
[ 1.652753] Using IPI No-Shortcut mode
[ 1.653059] registered taskstats version 1
[ 1.653082] Loading compiled-in X.509 certificates
[ 1.664592] Loaded X.509 cert 'Build time autogenerated kernel key: 618417f68f595f40711aec4799df3197227ac44e'
[ 1.664640] zswap: loaded using pool lzo/zbud
[ 1.675827] Key type big_key registered
[ 1.676330] PM: Magic number: 12:862:958
[ 1.676484] rtc_cmos 00:03: setting system clock to 2020-07-07T23:54:56 UTC (1594166096)
[ 1.676641] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 1.679049] Freeing unused kernel image memory: 856K
[ 1.684287] Write protecting kernel text and read-only data: 11708k
[ 1.684291] Run /init as init process
[ 1.726421] Linux agpgart interface v0.103
[ 1.893552] pci 0000:00:00.0: Intel 945GM Chipset
[ 1.893567] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.894196] pci 0000:00:00.0: detected 8192K stolen memory
[ 1.894273] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.895726] Console: switching to colour dummy device 80x25
[ 1.946103] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.946106] [drm] Driver supports precise vblank timestamp query.
[ 1.947146] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.956966] random: fast init done
[ 1.973285] [drm] RC6 disabled, disabling runtime PM support
[ 1.973365] [drm] Initialized overlay support.
[ 1.973786] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 1.974105] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.974739] acpi device:04: registered as cooling_device3
[ 1.974832] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.988811] fbcon: i915drmfb (fb0) is primary device
[ 2.477345] Console: switching to colour frame buffer device 128x48
[ 2.502701] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.670293] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.680247] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.680327] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.683253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.694129] ehci-pci: EHCI PCI platform driver
[ 2.694496] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.694506] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.694524] ehci-pci 0000:00:1d.7: debug port 1
[ 2.698447] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 2.698476] ehci-pci 0000:00:1d.7: irq 19, io mem 0x94444000
[ 2.713936] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.714045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 2.714048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.714051] usb usb1: Product: EHCI Host Controller
[ 2.714054] usb usb1: Manufacturer: Linux 5.3.7-arch1-1.0-ARCH ehci_hcd
[ 2.714056] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.714331] hub 1-0:1.0: USB hub found
[ 2.714345] hub 1-0:1.0: 8 ports detected
[ 2.729899] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.730206] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.730217] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.730229] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.730259] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
[ 2.739496] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[ 2.739500] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.739502] usb usb2: Product: UHCI Host Controller
[ 2.739505] usb usb2: Manufacturer: Linux 5.3.7-arch1-1.0-ARCH uhci_hcd
[ 2.739507] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.744556] hub 2-0:1.0: USB hub found
[ 2.744571] hub 2-0:1.0: 2 ports detected
[ 2.745451] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.745459] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.745469] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.745511] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020
[ 2.746226] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[ 2.746230] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.746232] usb usb3: Product: UHCI Host Controller
[ 2.746235] usb usb3: Manufacturer: Linux 5.3.7-arch1-1.0-ARCH uhci_hcd
[ 2.746237] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.746733] hub 3-0:1.0: USB hub found
[ 2.746748] hub 3-0:1.0: 2 ports detected
[ 2.747739] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.747747] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.747756] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.747793] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040
[ 2.748374] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[ 2.748377] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.748380] usb usb4: Product: UHCI Host Controller
[ 2.748382] usb usb4: Manufacturer: Linux 5.3.7-arch1-1.0-ARCH uhci_hcd
[ 2.748384] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.749013] hub 4-0:1.0: USB hub found
[ 2.749027] hub 4-0:1.0: 2 ports detected
[ 2.749945] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.749953] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.749962] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 2.749987] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060
[ 2.750557] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[ 2.750561] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.750563] usb usb5: Product: UHCI Host Controller
[ 2.750566] usb usb5: Manufacturer: Linux 5.3.7-arch1-1.0-ARCH uhci_hcd
[ 2.750568] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.751212] hub 5-0:1.0: USB hub found
[ 2.751226] hub 5-0:1.0: 2 ports detected
[ 2.759414] SCSI subsystem initialized
[ 2.771872] sdhci: Secure Digital Host Controller Interface driver
[ 2.771875] sdhci: Copyright(c) Pierre Ossman
[ 2.824328] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
[ 2.824574] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.824586] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 2.827400] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.830618] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.831778] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[ 2.831946] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.835128] libata version 3.00 loaded.
[ 2.845426] ata_piix 0000:00:1f.1: version 2.13
[ 2.850368] scsi host0: ata_piix
[ 2.852591] ahci 0000:00:1f.2: version 3.0
[ 2.852934] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.852961] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 2.852966] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 2.854540] scsi host1: ata_piix
[ 2.854711] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x10a0 irq 14
[ 2.854716] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x10a8 irq 15
[ 2.854889] ata1: port disabled--ignoring
[ 2.854946] ata2: port disabled--ignoring
[ 2.857113] scsi host2: ahci
[ 2.860917] scsi host3: ahci
[ 2.864699] scsi host4: ahci
[ 2.868613] scsi host5: ahci
[ 2.869398] ata3: SATA max UDMA/133 abar m1024@0x94445000 port 0x94445100 irq 28
[ 2.869400] ata4: DUMMY
[ 2.869402] ata5: DUMMY
[ 2.869404] ata6: DUMMY
[ 3.340700] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.387905] ata3.00: ATA-8: ST9250315ASG, 0006APM2, max UDMA/133
[ 3.387908] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 3.390119] ata3.00: configured for UDMA/133
[ 3.390398] scsi 2:0:0:0: Direct-Access ATA ST9250315ASG APM2 PQ: 0 ANSI: 5
[ 3.404309] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 3.404337] sd 2:0:0:0: [sda] Write Protect is off
[ 3.404341] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.404388] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.411688] sda: sda1 sda2
[ 3.412532] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.781610] device-mapper: uevent: version 1.0.3
[ 3.782110] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 7.346707] random: crng init done
[ 9.620805] cryptd: max_cpu_qlen set to 1000
[ 11.263597] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 14.432244] systemd[1]: systemd 243.78-1.0-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 14.447491] systemd[1]: Detected architecture x86.
[ 14.496982] systemd[1]: Set hostname to <x60coreboot>.
[ 19.400637] systemd[1]: /usr/lib/systemd/system/gssproxy.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/gssproxy.pid \xe2\x86\x92 /run/gssproxy.pid; please update the unit file accordingly.
[ 19.859223] systemd[1]: /usr/lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid \xe2\x86\x92 /run/thinkfan.pid; please update the unit file accordingly.
[ 20.156751] systemd[1]: Created slice system-getty.slice.
[ 20.157606] systemd[1]: Created slice system-syncthing.slice.
[ 20.158311] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 20.159114] systemd[1]: Created slice User and Session Slice.
[ 20.159513] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 20.159905] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 20.160541] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 20.160979] systemd[1]: Reached target Local Encrypted Volumes.
[ 20.161328] systemd[1]: Reached target Host and Network Name Lookups.
[ 20.453744] EXT4-fs (dm-2): re-mounted. Opts: data=ordered
[ 21.060822] usbcore: registered new device driver usbip-host
[ 21.457868] systemd-journald[318]: Received client request to flush runtime journal.
[ 25.224675] battery: ACPI: Battery Slot [BAT0] (battery absent)
[ 25.226906] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 25.330812] ACPI: AC Adapter [AC] (on-line)
[ 25.484752] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 25.484755] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 25.485570] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 25.574960] intel_rng: FWH not detected
[ 25.596350] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:28:41:2e
[ 25.596365] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 25.596443] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
[ 25.625701] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190703/utaddress-204)
[ 25.625712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.625716] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20190703/utaddress-204)
[ 25.625721] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.625723] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20190703/utaddress-204)
[ 25.625728] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 25.625730] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 25.654346] leds_ss4200: no LED devices found
[ 25.683015] Non-volatile memory driver v1.3
[ 25.742587] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 25.753782] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 25.834198] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 26.056061] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 26.056064] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 26.056065] thinkpad_acpi: ThinkPad BIOS CBET4000 4.12-1204-ge4aab352ee, EC 7BHT31WW-3.4
[ 26.056067] thinkpad_acpi: Lenovo ThinkPad X60, model 17075DG
[ 26.060740] thinkpad_acpi: radio switch found; radios are enabled
[ 26.063968] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 26.063996] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 26.063997] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 26.071361] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is blocked
[ 26.084149] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 26.091435] battery: new extension: ThinkPad Battery Extension
[ 26.091515] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 26.101885] snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:2010
[ 26.187668] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
[ 26.187673] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 26.187676] snd_hda_codec_analog hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 26.187679] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 26.187681] snd_hda_codec_analog hdaudioC0D0: dig-out=0xa/0x0
[ 26.187683] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 26.187686] snd_hda_codec_analog hdaudioC0D0: Mic=0x8
[ 26.187689] snd_hda_codec_analog hdaudioC0D0: CD=0x19
[ 26.212017] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 26.568663] psmouse serio1: hgpk: ID: 10 00 64
[ 26.744521] ath: phy0: Enable LNA combining
[ 26.746571] ath: EEPROM regdomain: 0x60
[ 26.746573] ath: EEPROM indicates we should expect a direct regpair map
[ 26.746576] ath: Country alpha2 being used: 00
[ 26.746577] ath: Regpair used: 0x60
[ 26.750207] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 26.751021] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf6cb0000, irq=17
[ 26.931046] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 26.949710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 26.987809] intel_powerclamp: No package C-state available
[ 27.010469] intel_powerclamp: No package C-state available
[ 27.299060] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 27.433957] mousedev: PS/2 mouse device common for all mice
[ 27.438582] iTCO_vendor_support: vendor-support=0
[ 27.448307] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 27.448390] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0560)
[ 27.448694] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 27.466862] e1000e 0000:01:00.0 enp1s0: renamed from eth0
[ 28.175629] Adding 2097148k swap on /dev/mapper/matrix-swapvol. Priority:-2 extents:1 across:2097148k FS
[ 30.314260] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 30.488064] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 30.685293] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 31.905942] RPC: Registered named UNIX socket transport module.
[ 31.905945] RPC: Registered udp transport module.
[ 31.905946] RPC: Registered tcp transport module.
[ 31.905948] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 42.301857] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 42.302034] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 42.953439] wlp2s0: authenticate with 40:9b:cd:a2:43:f4
[ 42.972447] wlp2s0: send auth to 40:9b:cd:a2:43:f4 (try 1/3)
[ 42.985158] wlp2s0: authenticated
[ 42.987342] wlp2s0: associate with 40:9b:cd:a2:43:f4 (try 1/3)
[ 43.011886] wlp2s0: RX AssocResp from 40:9b:cd:a2:43:f4 (capab=0x431 status=0 aid=7)
[ 43.012195] wlp2s0: associated
[ 43.012472] ath: EEPROM regdomain: 0x8348
[ 43.012475] ath: EEPROM indicates we should expect a country code
[ 43.012478] ath: doing EEPROM country->regdmn map search
[ 43.012481] ath: country maps to regdmn code: 0x3a
[ 43.012484] ath: Country alpha2 being used: US
[ 43.012486] ath: Regpair used: 0x3a
[ 43.012490] ath: regdomain 0x8348 dynamically updated by country element
[ 43.124196] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 50.411212] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.