blob: 7667c95f29c25d1bc7c6c4bf236cf893df239aa1 [file] [log] [blame]
[ 0.000000] Linux version 4.18.0-rc1-00001-g500f33266157 (martin@laptop) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #7 SMP Mon Jun 18 07:44:20 CEST 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-rc1-00001-g500f33266157 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff10fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff11000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043d5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 232566G/232566G, BIOS CBET4000 4.8-540-ga7835c462e-dirty 06/18/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x43d600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] last_pfn = 0xbff11 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.000000] BRK [0x29442000, 0x29442fff] PGTABLE
[ 0.000000] BRK [0x29443000, 0x29443fff] PGTABLE
[ 0.000000] BRK [0x29444000, 0x29444fff] PGTABLE
[ 0.000000] BRK [0x29445000, 0x29445fff] PGTABLE
[ 0.000000] BRK [0x29446000, 0x29446fff] PGTABLE
[ 0.000000] BRK [0x29447000, 0x29447fff] PGTABLE
[ 0.000000] BRK [0x29448000, 0x29448fff] PGTABLE
[ 0.000000] BRK [0x29449000, 0x29449fff] PGTABLE
[ 0.000000] BRK [0x2944a000, 0x2944afff] PGTABLE
[ 0.000000] BRK [0x2944b000, 0x2944bfff] PGTABLE
[ 0.000000] BRK [0x2944c000, 0x2944cfff] PGTABLE
[ 0.000000] BRK [0x2944d000, 0x2944dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35479000-0x36a33fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F66B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFF350E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF387C0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFF35280 003534 (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFF35240 000040
[ 0.000000] ACPI: FACS 0x00000000BFF35240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFF388C0 001977 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFF3A240 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFF3A280 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFF3A2C0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFF3A330 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF3C3E0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043d5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43d5f3000-0x43d5f7fff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043d5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff10fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043d5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043d5fffff]
[ 0.000000] On node 0 totalpages: 4183215
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12221 pages used for memmap
[ 0.000000] DMA32 zone: 782097 pages, LIFO batch:31
[ 0.000000] Normal zone: 53080 pages used for memmap
[ 0.000000] Normal zone: 3397120 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff11000-0xc29fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] [mem 0xc2a00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x4d3 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142488 r8192 d29544 u524288
[ 0.000000] pcpu-alloc: s142488 r8192 d29544 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4117829
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-rc1-00001-g500f33266157 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16358756K/16732860K available (10252K kernel code, 1207K rwdata, 3192K rodata, 1560K init, 660K bss, 374104K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 30769 entries in 121 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 36
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.000000] x2apic enabled
[ 0.000000] Switched APIC routing to cluster x2apic.
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2893.294 MHz processor
[ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b483f0c36, max_idle_ns: 440795226749 ns
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.58 BogoMIPS (lpj=11573176)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor disabled by boot time parameter
[ 0.029847] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.031112] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.031237] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.031333] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.031592] CPU: Physical Processor ID: 0
[ 0.031649] CPU: Processor Core ID: 0
[ 0.031713] mce: CPU supports 7 MCE banks
[ 0.031776] CPU0: Thermal monitoring enabled (TM1)
[ 0.031839] process: using mwait in idle threads
[ 0.031898] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.031957] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.032005] Spectre V2 : Mitigation: Full generic retpoline
[ 0.032063] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.032134] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.032193] Speculative Store Bypass: Vulnerable
[ 0.032331] Freeing SMP alternatives memory: 28K
[ 0.033296] TSC deadline timer enabled
[ 0.033299] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.033462] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.033555] ... version: 3
[ 0.033612] ... bit width: 48
[ 0.033669] ... generic registers: 4
[ 0.033726] ... value mask: 0000ffffffffffff
[ 0.033783] ... max period: 00007fffffffffff
[ 0.033839] ... fixed-purpose events: 3
[ 0.033896] ... event mask: 000000070000000f
[ 0.033989] Hierarchical SRCU implementation.
[ 0.034564] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.034639] smp: Bringing up secondary CPUs ...
[ 0.034784] x86: Booting SMP configuration:
[ 0.034841] .... node #0, CPUs: #1 #2 #3
[ 0.040052] smp: Brought up 1 node, 4 CPUs
[ 0.040121] smpboot: Max logical packages: 1
[ 0.040178] smpboot: Total of 4 processors activated (23146.35 BogoMIPS)
[ 0.043240] devtmpfs: initialized
[ 0.043240] x86/mm: Memory block size: 128MB
[ 0.045119] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.045119] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.045119] pinctrl core: initialized pinctrl subsystem
[ 0.045119] NET: Registered protocol family 16
[ 0.045119] audit: initializing netlink subsys (disabled)
[ 0.045119] audit: type=2000 audit(1529314000.044:1): state=initialized audit_enabled=0 res=1
[ 0.045119] cpuidle: using governor ladder
[ 0.045119] cpuidle: using governor menu
[ 0.045119] ACPI: bus type PCI registered
[ 0.045119] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.045119] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.045119] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.045119] PCI: Using configuration type 1 for base access
[ 0.045119] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.045119] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.045119] ACPI: Added _OSI(Module Device)
[ 0.045119] ACPI: Added _OSI(Processor Device)
[ 0.045119] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.045119] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.048004] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.050386] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.051718] ACPI: EC: EC started
[ 0.051774] ACPI: EC: interrupt blocked
[ 0.051874] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.051933] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.052005] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.052075] ACPI: Interpreter enabled
[ 0.052147] ACPI: (supports S0 S3 S4 S5)
[ 0.052203] ACPI: Using IOAPIC for interrupt routing
[ 0.052277] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.052455] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.055820] ACPI: Power Resource [FPWR] (off)
[ 0.056156] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.056219] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.056334] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.056412] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.056681] PCI host bridge to bus 0000:00
[ 0.056740] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.056801] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.056862] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.056933] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.057003] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.057074] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.057145] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.057216] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.057287] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.057358] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.057429] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.057500] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.057571] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.057641] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.057712] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.057782] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.057854] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window]
[ 0.057925] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.057996] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.058061] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.058143] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.058153] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.058159] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.058163] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.058187] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.058187] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit]
[ 0.058187] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.058187] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
[ 0.058187] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.058187] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.058187] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit]
[ 0.058187] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.058187] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.058187] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[ 0.058187] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff]
[ 0.058187] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.058187] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.058187] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.058187] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff]
[ 0.058187] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.058187] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.058187] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit]
[ 0.058187] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.058187] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.058187] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.058187] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.058187] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.058187] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.058187] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.058187] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.058187] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff]
[ 0.058187] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.058257] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.058421] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.058440] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.058448] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.058456] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.058464] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.058472] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.058480] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff]
[ 0.058523] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.058588] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.058605] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit]
[ 0.058625] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.058701] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.058724] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit]
[ 0.058932] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501
[ 0.058971] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.059086] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
[ 0.059396] pci 0000:01:00.0: supports D1 D2
[ 0.059397] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.059584] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.059651] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.059749] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.059826] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit]
[ 0.060117] pci 0000:02:00.0: supports D1
[ 0.060118] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.060310] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.060376] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.060458] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.060520] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.060524] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.060532] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.060683] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.060786] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.060888] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.060988] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.061089] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.061187] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.061287] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.061387] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.064006] ACPI: EC: interrupt unblocked
[ 0.064006] ACPI: EC: event unblocked
[ 0.064006] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.064006] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.064009] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.064067] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.064141] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.064199] vgaarb: loaded
[ 0.064286] pps_core: LinuxPPS API ver. 1 registered
[ 0.064343] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.064418] PTP clock support registered
[ 0.064479] EDAC MC: Ver: 3.0.0
[ 0.064623] PCI: Using ACPI for IRQ routing
[ 0.064650] PCI: pci_cache_line_size set to 64 bytes
[ 0.064728] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.064729] e820: reserve RAM buffer [mem 0xbff11000-0xbfffffff]
[ 0.064730] e820: reserve RAM buffer [mem 0x43d600000-0x43fffffff]
[ 0.064822] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.064822] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.068005] clocksource: Switched to clocksource tsc-early
[ 0.076296] VFS: Disk quotas dquot_6.6.0
[ 0.076371] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.076482] pnp: PnP ACPI init
[ 0.076668] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.076730] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.076790] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.076850] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.076910] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.076970] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.077031] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.077093] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.077153] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.077213] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.077278] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.077729] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.077792] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.077826] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.077887] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.077949] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.077966] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.077993] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.078014] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.078036] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.078052] pnp: PnP ACPI: found 7 devices
[ 0.083848] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.083961] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.084028] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.084099] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.084161] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.084232] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.084292] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.084357] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.084421] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.084500] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.084501] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.084502] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.084503] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.084505] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.084506] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.084507] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.084508] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.084509] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.084510] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.084512] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.084513] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.084514] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.084515] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.084516] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.084517] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.084519] pci_bus 0000:00: resource 20 [mem 0xc2a00001-0xefffffff window]
[ 0.084520] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.084522] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[ 0.084523] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[ 0.084524] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.084525] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[ 0.084527] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.084605] NET: Registered protocol family 2
[ 0.084781] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.084895] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.085135] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.085314] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.085405] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.085502] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.085626] NET: Registered protocol family 1
[ 0.085695] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.086243] PCI: CLS 64 bytes, default 64
[ 0.086276] Unpacking initramfs...
[ 0.414072] Freeing initrd memory: 22252K
[ 0.414212] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.414274] software IO TLB [mem 0xbbf11000-0xbff11000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[ 0.414898] Initialise system trusted keyrings
[ 0.415001] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.415085] zbud: loaded
[ 0.415346] pstore: using deflate compression
[ 0.702209] Key type asymmetric registered
[ 0.702268] Asymmetric key parser 'x509' registered
[ 0.702341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.702435] io scheduler noop registered
[ 0.702492] io scheduler deadline registered
[ 0.702560] io scheduler cfq registered (default)
[ 0.702618] io scheduler mq-deadline registered
[ 0.702676] io scheduler kyber registered
[ 0.703415] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 0.703496] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 0.703576] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[ 0.703656] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.703776] intel_idle: MWAIT substates: 0x21120
[ 0.703777] intel_idle: v0.4.1 model 0x3A
[ 0.703911] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.704363] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.704751] Linux agpgart interface v0.103
[ 0.712060] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.760304] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.760365] AMD IOMMUv2 functionality not available on this system
[ 0.760802] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.762555] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.762616] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.762928] mousedev: PS/2 mouse device common for all mice
[ 0.763032] rtc_cmos 00:03: RTC can wake from S4
[ 0.763245] rtc_cmos 00:03: registered as rtc0
[ 0.763315] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.763405] intel_pstate: Intel P-state driver initializing
[ 0.763766] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.764236] NET: Registered protocol family 10
[ 0.764411] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.765018] Segment Routing with IPv6
[ 0.765112] mip6: Mobile IPv6
[ 0.765178] NET: Registered protocol family 17
[ 0.765248] mpls_gso: MPLS GSO support
[ 0.765683] microcode: sig=0x306a9, pf=0x10, revision=0x1f
[ 0.765880] microcode: Microcode Update Driver: v2.2.
[ 0.765898] sched_clock: Marking stable (765871879, 0)->(743277250, 22594629)
[ 0.767968] registered taskstats version 1
[ 0.768045] Loading compiled-in X.509 certificates
[ 0.768140] zswap: loaded using pool lzo/zbud
[ 0.784109] ima: Allocated hash algorithm: sha256
[ 0.924719] rtc_cmos 00:03: setting system clock to 2018-06-18 09:26:41 UTC (1529314001)
[ 0.928262] Freeing unused kernel memory: 1560K
[ 0.944038] Write protecting the kernel read-only data: 16384k
[ 0.944974] Freeing unused kernel memory: 2008K
[ 0.948838] Freeing unused kernel memory: 904K
[ 0.959918] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.959975] x86/mm: Checking user space page tables
[ 0.965679] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.988418] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.988647] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.988741] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.019114] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.019175] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.019307] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.020920] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.021366] ACPI: bus type USB registered
[ 1.021447] usbcore: registered new interface driver usbfs
[ 1.021521] usbcore: registered new interface driver hub
[ 1.021608] usbcore: registered new device driver usb
[ 1.025211] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.026302] ehci-pci: EHCI PCI platform driver
[ 1.027485] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.027552] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.027683] ehci-pci 0000:00:1a.0: debug port 2
[ 1.028044] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.028133] ACPI: Thermal Zone [THM0] (53 C)
[ 1.030144] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.030230] ACPI: Thermal Zone [THM1] (27 C)
[ 1.031655] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.031681] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe163f000
[ 1.034066] SCSI subsystem initialized
[ 1.037619] sdhci: Secure Digital Host Controller Interface driver
[ 1.037681] sdhci: Copyright(c) Pierre Ossman
[ 1.038585] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 1.039029] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.039420] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.040022] libata version 3.00 loaded.
[ 1.044182] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.044297] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.044371] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.044443] usb usb1: Product: EHCI Host Controller
[ 1.044501] usb usb1: Manufacturer: Linux 4.18.0-rc1-00001-g500f33266157 ehci_hcd
[ 1.044573] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.044767] hub 1-0:1.0: USB hub found
[ 1.044833] hub 1-0:1.0: 3 ports detected
[ 1.045037] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.045105] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.046243] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.046322] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.046484] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.046557] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.046628] usb usb2: Product: xHCI Host Controller
[ 1.046688] usb usb2: Manufacturer: Linux 4.18.0-rc1-00001-g500f33266157 xhci-hcd
[ 1.046756] usb usb2: SerialNumber: 0000:00:14.0
[ 1.046914] hub 2-0:1.0: USB hub found
[ 1.046982] hub 2-0:1.0: 4 ports detected
[ 1.047204] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.047267] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.047290] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.047339] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.047401] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.047500] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 1.047551] ehci-pci 0000:00:1d.0: debug port 2
[ 1.047604] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.047774] usb usb3: Product: xHCI Host Controller
[ 1.047858] usb usb3: Manufacturer: Linux 4.18.0-rc1-00001-g500f33266157 xhci-hcd
[ 1.047972] usb usb3: SerialNumber: 0000:00:14.0
[ 1.048214] hub 3-0:1.0: USB hub found
[ 1.048308] hub 3-0:1.0: 4 ports detected
[ 1.051553] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.051569] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1640000
[ 1.052615] ahci 0000:00:1f.2: version 3.0
[ 1.052754] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.062911] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.062985] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.063491] scsi host0: ahci
[ 1.063642] scsi host1: ahci
[ 1.063783] scsi host2: ahci
[ 1.063927] scsi host3: ahci
[ 1.064110] scsi host4: ahci
[ 1.064254] scsi host5: ahci
[ 1.064369] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 31
[ 1.064469] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 31
[ 1.064543] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 31
[ 1.064618] ata4: DUMMY
[ 1.064675] ata5: DUMMY
[ 1.064732] ata6: DUMMY
[ 1.068017] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.068445] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 1.068525] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.068600] usb usb4: Product: EHCI Host Controller
[ 1.068661] usb usb4: Manufacturer: Linux 4.18.0-rc1-00001-g500f33266157 ehci_hcd
[ 1.068737] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.068949] hub 4-0:1.0: USB hub found
[ 1.069025] hub 4-0:1.0: 3 ports detected
[ 1.169958] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.295006] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:5f:1b:41
[ 1.295077] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.295199] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.295953] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.376036] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.378526] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.378881] ata1.00: supports DRM functions and may not be fully accessible
[ 1.379885] ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR060, max UDMA/133
[ 1.379964] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.382507] ata1.00: supports DRM functions and may not be fully accessible
[ 1.385572] ata1.00: configured for UDMA/133
[ 1.396171] scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R060 PQ: 0 ANSI: 5
[ 1.404035] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.436112] tsc: Refined TSC clocksource calibration: 2893.431 MHz
[ 1.436198] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b505e2cff, max_idle_ns: 440795342178 ns
[ 1.436337] clocksource: Switched to clocksource tsc
[ 1.532480] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.532573] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.533035] hub 1-1:1.0: USB hub found
[ 1.533212] hub 1-1:1.0: 6 ports detected
[ 1.560492] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.560585] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.561033] hub 4-1:1.0: USB hub found
[ 1.561298] hub 4-1:1.0: 8 ports detected
[ 1.710447] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.760195] random: fast init done
[ 1.801484] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1.820039] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.831931] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 1.891076] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 1.891187] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.929591] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 1.932061] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 1.932157] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.932245] usb 1-1.4: Product: BCM20702A0
[ 1.932313] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.932382] usb 1-1.4: SerialNumber: 7CE9D3E5DCBD
[ 2.012034] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[ 2.026449] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.031673] ata1.00: Enabling discard_zeroes_data
[ 2.031825] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[ 2.031909] sd 0:0:0:0: [sda] Write Protect is off
[ 2.031968] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.031992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.033462] ata1.00: Enabling discard_zeroes_data
[ 2.034518] sda: sda1 sda2 < sda5 >
[ 2.034701] ata1.00: Enabling discard_zeroes_data
[ 2.034869] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.082588] PM: Image not found (code -22)
[ 2.121218] usb 1-1.5: New USB device found, idVendor=13d3, idProduct=3304, bcdDevice= 0.01
[ 2.121288] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.137141] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.200134] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.228038] systemd[1]: Failed to insert module 'autofs4': No such file or directory
[ 2.242278] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.260338] systemd[1]: Detected architecture x86-64.
[ 2.261544] systemd[1]: Set hostname to <laptop>.
[ 2.319942] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18
[ 2.320031] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.320134] usb 1-1.6: Product: Integrated Camera
[ 2.320192] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.334787] systemd[1]: Reached target Libvirt guests shutdown.
[ 2.335423] systemd[1]: Created slice System Slice.
[ 2.335856] systemd[1]: Listening on udev Control Socket.
[ 2.336838] systemd[1]: Mounting Debug File System...
[ 2.337336] systemd[1]: Created slice system-getty.slice.
[ 2.337774] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.338201] systemd[1]: Listening on udev Kernel Socket.
[ 2.352072] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.356470] lp: driver loaded but no devices found
[ 2.358630] ppdev: user-space parallel port driver
[ 2.384264] Key type encrypted registered
[ 2.418536] systemd-journald[214]: Received request to flush runtime journal from PID 1
[ 2.483790] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C09:00/PNP0C0E:00/input/input4
[ 2.483875] ACPI: Sleep Button [SLPB]
[ 2.483957] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C09:00/PNP0C0D:00/input/input5
[ 2.485469] ACPI: Lid Switch [LID]
[ 2.485600] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 2.485698] ACPI: Power Button [PWRF]
[ 2.534459] ACPI: AC Adapter [AC] (off-line)
[ 2.543287] ACPI: Battery Slot [BAT0] (battery present)
[ 2.543469] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.558113] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.561087] media: Linux media interface: v0.10
[ 2.564955] Non-volatile memory driver v1.3
[ 2.568938] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.587135] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.588610] videodev: Linux video capture interface: v2.00
[ 2.589271] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 2.590074] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 2.590134] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.590189] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-540-ga7835c462e-dirty, EC G2HT35WW-3.22
[ 2.590260] thinkpad_acpi: Lenovo ThinkPad X230, model 232566G
[ 2.594622] thinkpad_acpi: radio switch found; radios are enabled
[ 2.594909] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 2.595189] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.595263] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.599756] Error: Driver 'pcspkr' is already registered, aborting...
[ 2.601361] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.601515] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.602990] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[ 2.602994] battery: new extension: ThinkPad Battery Extension
[ 2.603158] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 2.610018] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 2.616501] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 2.616572] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 2.616639] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.616704] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.616820] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[ 2.616943] usbcore: registered new interface driver uvcvideo
[ 2.616999] USB Video Class driver (1.1.1)
[ 2.647421] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.655298] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.655373] cfg80211: failed to load regulatory.db
[ 2.683781] [drm] Replacing VGA console driver
[ 2.685036] Console: switching to colour dummy device 80x25
[ 2.690397] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 2.690404] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 2.690406] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 2.690409] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 2.700033] Bluetooth: Core ver 2.22
[ 2.700051] NET: Registered protocol family 31
[ 2.700053] Bluetooth: HCI device and connection manager initialized
[ 2.700058] Bluetooth: HCI socket layer initialized
[ 2.700061] Bluetooth: L2CAP socket layer initialized
[ 2.700068] Bluetooth: SCO socket layer initialized
[ 2.704104] cryptd: max_cpu_qlen set to 1000
[ 2.707226] Adding 16731132k swap on /dev/sda5. Priority:-2 extents:1 across:16731132k SSFS
[ 2.708329] usbcore: registered new interface driver btusb
[ 2.709162] usb 1-1.5: Direct firmware load for ath3k-1.fw failed with error -2
[ 2.709168] Bluetooth: Firmware file "ath3k-1.fw" not found
[ 2.709173] ath3k: probe of 1-1.5:1.0 failed with error -2
[ 2.709191] usbcore: registered new interface driver ath3k
[ 2.713480] ath: phy0: Set BT/WLAN RX diversity capability
[ 2.720278] AVX version of gcm_enc/dec engaged.
[ 2.720284] AES CTR mode by8 optimization enabled
[ 2.740077] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.740083] [drm] Driver supports precise vblank timestamp query.
[ 2.740342] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.765846] ath: phy0: ASPM enabled: 0x43
[ 2.765852] ath: EEPROM regdomain: 0x60
[ 2.765853] ath: EEPROM indicates we should expect a direct regpair map
[ 2.765855] ath: Country alpha2 being used: 00
[ 2.765855] ath: Regpair used: 0x60
[ 2.772357] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 2.774357] iTCO_vendor_support: vendor-support=0
[ 2.776889] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.776939] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 2.784569] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.784797] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffaf8fc2110000, irq=17
[ 2.788613] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.792443] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 2.793941] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 2.794070] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.795157] acpi device:0b: registered as cooling_device5
[ 2.795201] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 2.795296] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.822050] Bluetooth: hci0: BCM: chip id 63
[ 2.822252] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.822256] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.822259] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 2.822261] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.822263] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.822265] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 2.822267] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 2.822269] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 2.823036] Bluetooth: hci0: BCM: features 0x07
[ 2.840047] Bluetooth: hci0: laptop
[ 2.841058] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 2.841078] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 2.841083] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 2.841999] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.843023] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.843091] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.843150] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 2.843208] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 2.843260] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 2.843321] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 2.843895] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 2.845501] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 2.851287] intel_rapl: Found RAPL domain package
[ 2.851292] intel_rapl: Found RAPL domain core
[ 2.851295] intel_rapl: Found RAPL domain uncore
[ 2.956755] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.956759] Bluetooth: BNEP filters: protocol multicast
[ 2.956763] Bluetooth: BNEP socket layer initialized
[ 3.009684] fbcon: inteldrmfb (fb0) is primary device
[ 3.139642] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 3.400400] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 3.406303] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.422757] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.446240] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.790235] Console: switching to colour frame buffer device 170x48
[ 3.811851] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.902119] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.572103] mei_me 0000:00:16.0: wait hw ready failed
[ 4.572114] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 4.572133] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 6.588096] mei_me 0000:00:16.0: wait hw ready failed
[ 6.588107] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 6.588129] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 8.604099] mei_me 0000:00:16.0: wait hw ready failed
[ 8.604110] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 8.604120] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 8.604123] mei_me 0000:00:16.0: reset failed ret = -19
[ 8.604127] mei_me 0000:00:16.0: link layer initialization failed.
[ 8.604131] mei_me 0000:00:16.0: init hw failure.
[ 8.604251] mei_me 0000:00:16.0: initialization failed.
[ 26.393084] random: crng init done
[ 26.393134] random: 7 urandom warning(s) missed due to ratelimiting
[ 35.852101] Bluetooth: RFCOMM TTY layer initialized
[ 35.852111] Bluetooth: RFCOMM socket layer initialized
[ 35.852117] Bluetooth: RFCOMM ver 1.11
[ 42.527902] fuse init (API version 7.27)
[ 62.022927] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 62.079010] wlp2s0: authenticate with 2c:59:8a:70:7a:57
[ 62.093322] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3)
[ 62.095841] wlp2s0: authenticated
[ 62.096021] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3)
[ 62.163276] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=1)
[ 62.163438] wlp2s0: associated
[ 62.186699] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 248.565266] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 248.565277] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 248.565657] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 248.565675] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 248.610023] wlp2s0: deauthenticating from 2c:59:8a:70:7a:57 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 248.853984] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 252.011508] PM: suspend entry (deep)
[ 252.011512] PM: Syncing filesystems ... done.
[ 252.020892] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 252.022726] OOM killer disabled.
[ 252.022727] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 252.023842] Suspending console(s) (use no_console_suspend to debug)
[ 252.183389] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 252.184019] sd 0:0:0:0: [sda] Stopping disk
[ 252.378824] e1000e: EEE TX LPI TIMER: 00000011
[ 252.475471] ACPI: EC: interrupt blocked
[ 252.515581] ACPI: Preparing to enter system sleep state S3
[ 252.518623] ACPI: EC: event blocked
[ 252.518624] ACPI: EC: EC stopped
[ 252.518625] PM: Saving platform NVS memory
[ 252.518626] Disabling non-boot CPUs ...
[ 252.532538] smpboot: CPU 1 is now offline
[ 252.556568] smpboot: CPU 2 is now offline
[ 252.580539] smpboot: CPU 3 is now offline
[ 252.582227] ACPI: Low-level resume complete
[ 252.582263] ACPI: EC: EC started
[ 252.582264] PM: Restoring platform NVS memory
[ 252.582589] Enabling non-boot CPUs ...
[ 252.582692] x86: Booting SMP configuration:
[ 252.582692] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 252.585211] cache: parent cpu1 should not be sleeping
[ 252.585493] CPU1 is up
[ 252.585639] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 252.588084] cache: parent cpu2 should not be sleeping
[ 252.588407] CPU2 is up
[ 252.588531] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 252.590985] cache: parent cpu3 should not be sleeping
[ 252.591301] CPU3 is up
[ 252.594685] ACPI: Waking up from system sleep state S3
[ 252.596592] ACPI: EC: interrupt unblocked
[ 252.637360] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 252.657273] ACPI: EC: event unblocked
[ 252.658421] ath: phy0: ASPM enabled: 0x43
[ 252.658852] sd 0:0:0:0: [sda] Starting disk
[ 252.912859] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 252.971835] ata2: SATA link down (SStatus 0 SControl 300)
[ 252.971874] ata3: SATA link down (SStatus 0 SControl 300)
[ 252.971916] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 252.974142] ata1.00: supports DRM functions and may not be fully accessible
[ 253.039211] ata1.00: supports DRM functions and may not be fully accessible
[ 253.090751] ata1.00: configured for UDMA/133
[ 253.100846] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci
[ 253.103826] ata1.00: Enabling discard_zeroes_data
[ 253.288842] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 253.364767] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 253.396017] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 253.501496] OOM killer enabled.
[ 253.501500] Restarting tasks ... done.
[ 253.530973] video LNXVIDEO:00: Restoring backlight state
[ 253.531107] PM: suspend exit
[ 253.622826] Bluetooth: hci0: BCM: chip id 63
[ 253.623847] Bluetooth: hci0: BCM: features 0x07
[ 253.639805] Bluetooth: hci0: BCM20702A
[ 253.640828] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 253.640861] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 253.640868] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 253.688406] e1000e: enp0s25 NIC Link is Down
[ 253.689073] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 253.949010] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 253.951380] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 253.970736] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 253.994154] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 254.046509] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 255.167177] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 255.213009] wlp2s0: authenticate with 2c:59:8a:70:7a:57
[ 255.227306] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3)
[ 255.231693] wlp2s0: authenticated
[ 255.232710] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3)
[ 255.297588] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=2)
[ 255.297802] wlp2s0: associated
[ 255.306386] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1069.800353] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 1069.800363] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1069.800744] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 1069.800752] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1069.856995] wlp2s0: deauthenticating from 2c:59:8a:70:7a:57 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1069.889613] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1072.886148] PM: suspend entry (deep)
[ 1072.886152] PM: Syncing filesystems ... done.
[ 1073.012977] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1073.015623] OOM killer disabled.
[ 1073.015625] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1073.016846] Suspending console(s) (use no_console_suspend to debug)
[ 1073.191590] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1073.195071] sd 0:0:0:0: [sda] Stopping disk
[ 1073.383170] e1000e: EEE TX LPI TIMER: 00000011
[ 1073.476400] ACPI: EC: interrupt blocked
[ 1073.516050] ACPI: Preparing to enter system sleep state S3
[ 1073.519007] ACPI: EC: event blocked
[ 1073.519008] ACPI: EC: EC stopped
[ 1073.519009] PM: Saving platform NVS memory
[ 1073.519011] Disabling non-boot CPUs ...
[ 1073.533026] smpboot: CPU 1 is now offline
[ 1073.557606] smpboot: CPU 2 is now offline
[ 1073.580883] smpboot: CPU 3 is now offline
[ 1073.582627] ACPI: Low-level resume complete
[ 1073.582666] ACPI: EC: EC started
[ 1073.582666] PM: Restoring platform NVS memory
[ 1073.583002] Enabling non-boot CPUs ...
[ 1073.583104] x86: Booting SMP configuration:
[ 1073.583104] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1073.585622] cache: parent cpu1 should not be sleeping
[ 1073.585908] CPU1 is up
[ 1073.586056] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 1073.588506] cache: parent cpu2 should not be sleeping
[ 1073.588832] CPU2 is up
[ 1073.588960] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1073.591403] cache: parent cpu3 should not be sleeping
[ 1073.591734] CPU3 is up
[ 1073.595104] ACPI: Waking up from system sleep state S3
[ 1073.596875] pci 0000:00:16.0: Refused to change power state, currently in D3
[ 1073.597042] ACPI: EC: interrupt unblocked
[ 1073.633769] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 1073.635369] ACPI: EC: event unblocked
[ 1073.636568] ath: phy0: ASPM enabled: 0x43
[ 1073.636694] sd 0:0:0:0: [sda] Starting disk
[ 1073.889153] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 1073.951617] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1073.951644] ata2: SATA link down (SStatus 0 SControl 300)
[ 1073.951699] ata3: SATA link down (SStatus 0 SControl 300)
[ 1073.956903] ata1.00: supports DRM functions and may not be fully accessible
[ 1074.021700] ata1.00: supports DRM functions and may not be fully accessible
[ 1074.073440] ata1.00: configured for UDMA/133
[ 1074.077166] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci
[ 1074.086731] ata1.00: Enabling discard_zeroes_data
[ 1074.265164] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 1074.339872] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1074.370883] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 1074.476140] OOM killer enabled.
[ 1074.476144] Restarting tasks ... done.
[ 1074.506369] video LNXVIDEO:00: Restoring backlight state
[ 1074.506575] PM: suspend exit
[ 1074.599120] Bluetooth: hci0: BCM: chip id 63
[ 1074.600175] Bluetooth: hci0: BCM: features 0x07
[ 1074.616066] Bluetooth: hci0: BCM20702A
[ 1074.617052] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 1074.617138] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 1074.617145] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 1074.660760] e1000e: enp0s25 NIC Link is Down
[ 1074.661504] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 1074.921319] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 1074.923308] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1074.942577] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1074.966173] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1075.021592] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1076.144386] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1076.184732] wlp2s0: authenticate with 2c:59:8a:70:7a:57
[ 1076.199126] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3)
[ 1076.201348] wlp2s0: authenticated
[ 1076.204989] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3)
[ 1076.273720] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=3)
[ 1076.273938] wlp2s0: associated
[ 1076.280230] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1134.427781] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1134.428725] Bridge firewalling registered
[ 1134.560874] Initializing XFRM netlink socket
[ 1134.598843] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 1147.314946] docker0: port 1(vethcc8f785) entered blocking state
[ 1147.314954] docker0: port 1(vethcc8f785) entered disabled state
[ 1147.315234] device vethcc8f785 entered promiscuous mode
[ 1147.315762] IPv6: ADDRCONF(NETDEV_UP): vethcc8f785: link is not ready
[ 1147.315768] docker0: port 1(vethcc8f785) entered blocking state
[ 1147.315786] docker0: port 1(vethcc8f785) entered forwarding state
[ 1147.315999] docker0: port 1(vethcc8f785) entered disabled state
[ 1147.533205] eth0: renamed from vethc3b8b15
[ 1147.552966] IPv6: ADDRCONF(NETDEV_CHANGE): vethcc8f785: link becomes ready
[ 1147.553092] docker0: port 1(vethcc8f785) entered blocking state
[ 1147.553097] docker0: port 1(vethcc8f785) entered forwarding state
[ 1147.553175] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 1147.777518] docker0: port 1(vethcc8f785) entered disabled state
[ 1147.777703] vethc3b8b15: renamed from eth0
[ 1147.827291] docker0: port 1(vethcc8f785) entered disabled state
[ 1147.829954] device vethcc8f785 left promiscuous mode
[ 1147.829960] docker0: port 1(vethcc8f785) entered disabled state
[ 1626.399201] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 1626.399211] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1626.399625] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 1626.399634] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1626.460128] wlp2s0: deauthenticating from 2c:59:8a:70:7a:57 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1626.495545] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1630.331849] PM: suspend entry (deep)
[ 1630.331855] PM: Syncing filesystems ... done.
[ 1630.344955] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1630.346773] OOM killer disabled.
[ 1630.346774] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1630.347961] Suspending console(s) (use no_console_suspend to debug)
[ 1630.512721] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1630.516152] sd 0:0:0:0: [sda] Stopping disk
[ 1630.707099] e1000e: EEE TX LPI TIMER: 00000011
[ 1630.801366] ACPI: EC: interrupt blocked
[ 1630.841101] ACPI: Preparing to enter system sleep state S3
[ 1630.844067] ACPI: EC: event blocked
[ 1630.844068] ACPI: EC: EC stopped
[ 1630.844069] PM: Saving platform NVS memory
[ 1630.844070] Disabling non-boot CPUs ...
[ 1630.858076] smpboot: CPU 1 is now offline
[ 1630.882002] smpboot: CPU 2 is now offline
[ 1630.905878] smpboot: CPU 3 is now offline
[ 1630.908083] ACPI: Low-level resume complete
[ 1630.908121] ACPI: EC: EC started
[ 1630.908121] PM: Restoring platform NVS memory
[ 1630.908459] Enabling non-boot CPUs ...
[ 1630.908627] x86: Booting SMP configuration:
[ 1630.908628] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1630.911139] cache: parent cpu1 should not be sleeping
[ 1630.911451] CPU1 is up
[ 1630.911661] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 1630.914125] cache: parent cpu2 should not be sleeping
[ 1630.914480] CPU2 is up
[ 1630.914665] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1630.917106] cache: parent cpu3 should not be sleeping
[ 1630.917493] CPU3 is up
[ 1630.920864] ACPI: Waking up from system sleep state S3
[ 1630.922700] pci 0000:00:16.0: Refused to change power state, currently in D3
[ 1630.922823] ACPI: EC: interrupt unblocked
[ 1630.962694] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 1630.964449] ACPI: EC: event unblocked
[ 1630.965613] ath: phy0: ASPM enabled: 0x43
[ 1630.966204] sd 0:0:0:0: [sda] Starting disk
[ 1631.222001] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci
[ 1631.280355] ata3: SATA link down (SStatus 0 SControl 300)
[ 1631.280457] ata2: SATA link down (SStatus 0 SControl 300)
[ 1631.280489] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1631.282893] ata1.00: supports DRM functions and may not be fully accessible
[ 1631.347686] ata1.00: supports DRM functions and may not be fully accessible
[ 1631.399074] ata1.00: configured for UDMA/133
[ 1631.412255] ata1.00: Enabling discard_zeroes_data
[ 1631.413905] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 1631.601832] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 1631.671568] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1631.702581] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 1631.808010] OOM killer enabled.
[ 1631.808013] Restarting tasks ... done.
[ 1631.842494] video LNXVIDEO:00: Restoring backlight state
[ 1631.842575] PM: suspend exit
[ 1631.935389] Bluetooth: hci0: BCM: chip id 63
[ 1631.936450] Bluetooth: hci0: BCM: features 0x07
[ 1631.952444] Bluetooth: hci0: BCM20702A
[ 1631.953517] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 1631.953555] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 1631.953651] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 1632.001168] e1000e: enp0s25 NIC Link is Down
[ 1632.003176] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 1632.261696] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 1632.263747] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1632.283359] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1632.309667] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1632.358166] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1974.239045] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2191.728293] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 2191.728302] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 2191.728710] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 2191.728718] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 2195.091014] PM: suspend entry (deep)
[ 2195.091018] PM: Syncing filesystems ... done.
[ 2195.103553] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2195.105440] OOM killer disabled.
[ 2195.105441] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2195.106602] Suspending console(s) (use no_console_suspend to debug)
[ 2195.272027] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2195.275508] sd 0:0:0:0: [sda] Stopping disk
[ 2195.468261] e1000e: EEE TX LPI TIMER: 00000011
[ 2195.564681] ACPI: EC: interrupt blocked
[ 2195.604359] ACPI: Preparing to enter system sleep state S3
[ 2195.607429] ACPI: EC: event blocked
[ 2195.607429] ACPI: EC: EC stopped
[ 2195.607430] PM: Saving platform NVS memory
[ 2195.607431] Disabling non-boot CPUs ...
[ 2195.621373] smpboot: CPU 1 is now offline
[ 2195.645898] smpboot: CPU 2 is now offline
[ 2195.669181] smpboot: CPU 3 is now offline
[ 2195.671232] ACPI: Low-level resume complete
[ 2195.671270] ACPI: EC: EC started
[ 2195.671270] PM: Restoring platform NVS memory
[ 2195.671608] Enabling non-boot CPUs ...
[ 2195.671797] x86: Booting SMP configuration:
[ 2195.671797] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2195.674313] cache: parent cpu1 should not be sleeping
[ 2195.674616] CPU1 is up
[ 2195.674839] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2195.677295] cache: parent cpu2 should not be sleeping
[ 2195.677668] CPU2 is up
[ 2195.677874] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2195.680321] cache: parent cpu3 should not be sleeping
[ 2195.680696] CPU3 is up
[ 2195.684080] ACPI: Waking up from system sleep state S3
[ 2195.685953] pci 0000:00:16.0: Refused to change power state, currently in D3
[ 2195.686073] ACPI: EC: interrupt unblocked
[ 2195.726020] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 2195.727708] ACPI: EC: event unblocked
[ 2195.729893] ath: phy0: ASPM enabled: 0x43
[ 2195.732672] sd 0:0:0:0: [sda] Starting disk
[ 2195.985275] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 2196.043652] ata3: SATA link down (SStatus 0 SControl 300)
[ 2196.043809] ata2: SATA link down (SStatus 0 SControl 300)
[ 2196.043842] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2196.048634] ata1.00: supports DRM functions and may not be fully accessible
[ 2196.113710] ata1.00: supports DRM functions and may not be fully accessible
[ 2196.165295] ata1.00: configured for UDMA/133
[ 2196.173225] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 2196.178713] ata1.00: Enabling discard_zeroes_data
[ 2196.365138] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci
[ 2196.438009] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 2196.470533] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 2196.577309] OOM killer enabled.
[ 2196.577312] Restarting tasks ... done.
[ 2196.614236] video LNXVIDEO:00: Restoring backlight state
[ 2196.614522] PM: suspend exit
[ 2196.695540] Bluetooth: hci0: BCM: chip id 63
[ 2196.696506] Bluetooth: hci0: BCM: features 0x07
[ 2196.712546] Bluetooth: hci0: BCM20702A
[ 2196.713546] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 2196.713574] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 2196.713580] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 2196.769643] e1000e: enp0s25 NIC Link is Down
[ 2196.771596] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 2197.032953] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 2197.035163] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2197.054506] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2197.081015] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2197.130098] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2202.014317] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 2202.164476] usb 2-1: New USB device found, idVendor=1e68, idProduct=0035, bcdDevice= 0.35
[ 2202.164486] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2202.164491] usb 2-1: Product: TrekStor USB-Stick CS
[ 2202.164495] usb 2-1: Manufacturer: TrekStor USB-Stick CS
[ 2202.164499] usb 2-1: SerialNumber: AA000000000948
[ 2202.185811] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 2202.185914] scsi host6: usb-storage 2-1:1.0
[ 2202.185991] usbcore: registered new interface driver usb-storage
[ 2202.187490] usbcore: registered new interface driver uas
[ 2203.605319] scsi 6:0:0:0: Direct-Access TrekStor TrekStor USB CS PQ: 0 ANSI: 0 CCS
[ 2203.605683] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 2203.605835] sd 6:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB)
[ 2203.606351] sd 6:0:0:0: [sdb] Write Protect is off
[ 2203.606354] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2203.606873] sd 6:0:0:0: [sdb] No Caching mode page found
[ 2203.606875] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2203.609991] sdb: sdb1
[ 2203.611545] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2298.046624] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 2298.105134] wlp2s0: authenticate with 2c:59:8a:70:7a:57
[ 2298.119483] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3)
[ 2298.123224] wlp2s0: authenticated
[ 2298.126221] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3)
[ 2298.192031] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=1)
[ 2298.192262] wlp2s0: associated
[ 2298.200123] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 2602.007104] docker0: port 1(veth19ac1f1) entered blocking state
[ 2602.007109] docker0: port 1(veth19ac1f1) entered disabled state
[ 2602.007211] device veth19ac1f1 entered promiscuous mode
[ 2602.007415] IPv6: ADDRCONF(NETDEV_UP): veth19ac1f1: link is not ready
[ 2602.224953] eth0: renamed from veth15e188f
[ 2602.238526] IPv6: ADDRCONF(NETDEV_CHANGE): veth19ac1f1: link becomes ready
[ 2602.238596] docker0: port 1(veth19ac1f1) entered blocking state
[ 2602.238599] docker0: port 1(veth19ac1f1) entered forwarding state
[ 2843.741058] docker0: port 1(veth19ac1f1) entered disabled state
[ 2843.741191] veth15e188f: renamed from eth0
[ 2843.806611] docker0: port 1(veth19ac1f1) entered disabled state
[ 2843.808469] device veth19ac1f1 left promiscuous mode
[ 2843.808474] docker0: port 1(veth19ac1f1) entered disabled state