blob: 0c0228ca5f41daf0506c7e73db414477eaaa2a44 [file] [log] [blame]
[ 0.000000] Linux version 5.10.0-6-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.28-1 (2021-04-09)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.0-6-amd64 root=/dev/mapper/gold--vg-root ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff16fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff17000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: LENOVO 232566G/232566G, BIOS CBET4000 4.13-3305-g8f3e1192df-dirty 04/20/2021
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.363 MHz processor
[ 0.000442] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000444] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000448] last_pfn = 0x47d600 max_arch_pfn = 0x400000000
[ 0.000452] MTRR default type: uncachable
[ 0.000453] MTRR fixed ranges enabled:
[ 0.000454] 00000-9FFFF write-back
[ 0.000455] A0000-BFFFF uncachable
[ 0.000456] C0000-FFFFF write-back
[ 0.000457] MTRR variable ranges enabled:
[ 0.000458] 0 base 000000000 mask F80000000 write-back
[ 0.000459] 1 base 090000000 mask FF0000000 write-combining
[ 0.000460] 2 base 100000000 mask F00000000 write-back
[ 0.000461] 3 base 200000000 mask E00000000 write-back
[ 0.000461] 4 base 400000000 mask F80000000 write-back
[ 0.000462] 5 base 47D600000 mask FFFE00000 uncachable
[ 0.000463] 6 base 47D800000 mask FFF800000 uncachable
[ 0.000464] 7 base 47E000000 mask FFE000000 uncachable
[ 0.000465] 8 disabled
[ 0.000465] 9 disabled
[ 0.000763] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000998] last_pfn = 0x7ff17 max_arch_pfn = 0x400000000
[ 0.010569] ACPI: Early table checksum verification disabled
[ 0.010572] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4)
[ 0.010576] ACPI: XSDT 0x000000007FF3A0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.010581] ACPI: FACP 0x000000007FF3DBA0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.010586] ACPI: DSDT 0x000000007FF3A280 003917 (v02 COREv4 COREBOOT 20110725 INTL 20200925)
[ 0.010590] ACPI: FACS 0x000000007FF3A240 000040
[ 0.010592] ACPI: FACS 0x000000007FF3A240 000040
[ 0.010594] ACPI: SSDT 0x000000007FF3DCC0 0017BB (v02 COREv4 COREBOOT 0000002A CORE 20200925)
[ 0.010597] ACPI: MCFG 0x000000007FF3F480 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.010600] ACPI: TCPA 0x000000007FF3F4C0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.010603] ACPI: APIC 0x000000007FF3F500 00006C (v03 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.010606] ACPI: DMAR 0x000000007FF3F570 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.010609] ACPI: HPET 0x000000007FF3F630 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.010612] ACPI: Reserving FACP table memory at [mem 0x7ff3dba0-0x7ff3dcb3]
[ 0.010613] ACPI: Reserving DSDT table memory at [mem 0x7ff3a280-0x7ff3db96]
[ 0.010614] ACPI: Reserving FACS table memory at [mem 0x7ff3a240-0x7ff3a27f]
[ 0.010614] ACPI: Reserving FACS table memory at [mem 0x7ff3a240-0x7ff3a27f]
[ 0.010615] ACPI: Reserving SSDT table memory at [mem 0x7ff3dcc0-0x7ff3f47a]
[ 0.010616] ACPI: Reserving MCFG table memory at [mem 0x7ff3f480-0x7ff3f4bb]
[ 0.010617] ACPI: Reserving TCPA table memory at [mem 0x7ff3f4c0-0x7ff3f4f1]
[ 0.010617] ACPI: Reserving APIC table memory at [mem 0x7ff3f500-0x7ff3f56b]
[ 0.010618] ACPI: Reserving DMAR table memory at [mem 0x7ff3f570-0x7ff3f62f]
[ 0.010619] ACPI: Reserving HPET table memory at [mem 0x7ff3f630-0x7ff3f667]
[ 0.010918] RAMDISK: [mem 0x32891000-0x3543ffff]
[ 0.010927] ACPI: Local APIC address 0xfee00000
[ 0.010975] No NUMA configuration found
[ 0.010977] Faking a node at [mem 0x0000000000000000-0x000000047d5fffff]
[ 0.010986] NODE_DATA(0) allocated [mem 0x47d5c9000-0x47d5f2fff]
[ 0.011394] Zone ranges:
[ 0.011395] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011396] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011398] Normal [mem 0x0000000100000000-0x000000047d5fffff]
[ 0.011399] Device empty
[ 0.011400] Movable zone start for each node
[ 0.011403] Early memory node ranges
[ 0.011404] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.011405] node 0: [mem 0x0000000000100000-0x000000007ff16fff]
[ 0.011406] node 0: [mem 0x0000000100000000-0x000000047d5fffff]
[ 0.011408] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff]
[ 0.011410] On node 0 totalpages: 4183221
[ 0.011411] DMA zone: 64 pages used for memmap
[ 0.011411] DMA zone: 21 pages reserved
[ 0.011412] DMA zone: 3998 pages, LIFO batch:0
[ 0.011715] DMA zone: 28770 pages in unavailable ranges
[ 0.011716] DMA32 zone: 8125 pages used for memmap
[ 0.011717] DMA32 zone: 519959 pages, LIFO batch:63
[ 0.016414] DMA32 zone: 233 pages in unavailable ranges
[ 0.016416] Normal zone: 57176 pages used for memmap
[ 0.016417] Normal zone: 3659264 pages, LIFO batch:63
[ 0.016823] Normal zone: 10752 pages in unavailable ranges
[ 0.016832] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.017006] ACPI: PM-Timer IO Port: 0x508
[ 0.017008] ACPI: Local APIC address 0xfee00000
[ 0.017024] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.017026] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.017027] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.017029] ACPI: IRQ0 used by override.
[ 0.017030] ACPI: IRQ9 used by override.
[ 0.017031] Using ACPI (MADT) for SMP configuration information
[ 0.017033] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.017037] TSC deadline timer available
[ 0.017039] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.017050] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.017051] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.017052] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.017052] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.017054] PM: hibernation: Registered nosave memory: [mem 0x7ff17000-0x829fffff]
[ 0.017055] PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.017055] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.017056] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.017057] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.017057] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.017058] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.017058] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.017060] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.017061] Booting paravirtualized kernel on bare hardware
[ 0.017064] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.020896] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.021074] percpu: Embedded 54 pages/cpu s183960 r8192 d29032 u524288
[ 0.021079] pcpu-alloc: s183960 r8192 d29032 u524288 alloc=1*2097152
[ 0.021080] pcpu-alloc: [0] 0 1 2 3
[ 0.021105] Built 1 zonelists, mobility grouping on. Total pages: 4117835
[ 0.021106] Policy zone: Normal
[ 0.021107] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-6-amd64 root=/dev/mapper/gold--vg-root ro quiet iomem=relaxed
[ 0.022013] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.022455] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.022501] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.036772] Memory: 2116288K/16732884K available (12295K kernel code, 2544K rwdata, 7548K rodata, 2388K init, 3712K bss, 433484K reserved, 0K cma-reserved)
[ 0.036779] random: get_random_u64 called from __kmem_cache_create+0x2e/0x550 with crng_init=0
[ 0.036884] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.036895] Kernel/User page tables isolation: enabled
[ 0.036909] ftrace: allocating 36387 entries in 143 pages
[ 0.048897] ftrace: allocated 143 pages with 5 groups
[ 0.049001] rcu: Hierarchical RCU implementation.
[ 0.049002] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.049003] Rude variant of Tasks RCU enabled.
[ 0.049003] Tracing variant of Tasks RCU enabled.
[ 0.049004] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.049005] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.052720] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.052940] random: crng done (trusting CPU's manufacturer)
[ 0.053259] Console: colour dummy device 80x25
[ 0.053270] printk: console [tty0] enabled
[ 0.053282] ACPI: Core revision 20200925
[ 0.053352] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.053366] APIC: Switch to symmetric I/O mode setup
[ 0.053368] DMAR: Host address width 36
[ 0.053369] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.053374] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.053374] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.053377] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.053378] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.053380] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.053381] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.053382] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.053826] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.053828] x2apic enabled
[ 0.053835] Switched APIC routing to cluster x2apic.
[ 0.054266] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073367] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b4c5561ae, max_idle_ns: 440795352947 ns
[ 0.073372] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.72 BogoMIPS (lpj=11573452)
[ 0.073374] pid_max: default: 32768 minimum: 301
[ 0.073398] LSM: Security Framework initializing
[ 0.073406] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.073431] AppArmor: AppArmor initialized
[ 0.073433] TOMOYO Linux initialized
[ 0.073472] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.073505] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.073747] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.073756] process: using mwait in idle threads
[ 0.073759] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.073759] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.073762] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.073763] Spectre V2 : Mitigation: Full generic retpoline
[ 0.073764] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.073764] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.073766] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.073766] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.073768] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.073770] SRBDS: Vulnerable: No microcode
[ 0.073771] MDS: Mitigation: Clear CPU buffers
[ 0.073887] Freeing SMP alternatives memory: 32K
[ 0.075580] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.075722] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.075729] ... version: 3
[ 0.075730] ... bit width: 48
[ 0.075731] ... generic registers: 4
[ 0.075731] ... value mask: 0000ffffffffffff
[ 0.075732] ... max period: 00007fffffffffff
[ 0.075732] ... fixed-purpose events: 3
[ 0.075733] ... event mask: 000000070000000f
[ 0.075851] rcu: Hierarchical SRCU implementation.
[ 0.076314] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.076364] smp: Bringing up secondary CPUs ...
[ 0.076448] x86: Booting SMP configuration:
[ 0.076449] .... node #0, CPUs: #1
[ 0.077369] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.077369] #2 #3
[ 0.079811] smp: Brought up 1 node, 4 CPUs
[ 0.079811] smpboot: Max logical packages: 1
[ 0.079811] smpboot: Total of 4 processors activated (23146.90 BogoMIPS)
[ 0.109778] node 0 deferred pages initialised in 32ms
[ 0.109823] devtmpfs: initialized
[ 0.109823] x86/mm: Memory block size: 128MB
[ 0.110458] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.110458] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.110458] pinctrl core: initialized pinctrl subsystem
[ 0.110458] NET: Registered protocol family 16
[ 0.110458] audit: initializing netlink subsys (disabled)
[ 0.110458] audit: type=2000 audit(1618928334.056:1): state=initialized audit_enabled=0 res=1
[ 0.110458] thermal_sys: Registered thermal governor 'fair_share'
[ 0.110458] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.110458] thermal_sys: Registered thermal governor 'step_wise'
[ 0.110458] thermal_sys: Registered thermal governor 'user_space'
[ 0.110458] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.110458] cpuidle: using governor ladder
[ 0.110458] cpuidle: using governor menu
[ 0.110458] ACPI: bus type PCI registered
[ 0.110458] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.110458] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.110458] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.110458] PCI: Using configuration type 1 for base access
[ 0.110458] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.110458] Kprobes globally optimized
[ 0.110458] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.259323] ACPI: Added _OSI(Module Device)
[ 0.259323] ACPI: Added _OSI(Processor Device)
[ 0.259323] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.259323] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.259323] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.259323] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.259323] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.259323] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.259866] ACPI: EC: EC started
[ 0.259867] ACPI: EC: interrupt blocked
[ 0.260154] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.260156] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.260157] ACPI: Interpreter enabled
[ 0.260172] ACPI: (supports S0 S3 S4 S5)
[ 0.260173] ACPI: Using IOAPIC for interrupt routing
[ 0.260189] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.260300] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.263492] ACPI: Power Resource [FPWR] (off)
[ 0.263722] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.263726] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.263765] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.263773] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.263816] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
[ 0.263957] PCI host bridge to bus 0000:00
[ 0.263959] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.263960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.263961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.263962] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.263963] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.263964] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.263965] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.263966] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.263967] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.263968] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.263969] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.263969] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.263970] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.263971] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.263972] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.263973] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.263974] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.263975] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.263987] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.264076] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.264085] pci 0000:00:02.0: reg 0x10: [mem 0x82c00000-0x82ffffff 64bit]
[ 0.264090] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.264094] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.264169] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.264175] pci 0000:00:04.0: reg 0x10: [mem 0x83830000-0x83837fff 64bit]
[ 0.264266] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.264284] pci 0000:00:14.0: reg 0x10: [mem 0x83820000-0x8382ffff 64bit]
[ 0.264352] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.264473] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.264552] pci 0000:00:16.0: reg 0x10: [mem 0x83842000-0x8384200f 64bit]
[ 0.264877] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.264999] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.265013] pci 0000:00:19.0: reg 0x10: [mem 0x83800000-0x8381ffff]
[ 0.265021] pci 0000:00:19.0: reg 0x14: [mem 0x8383c000-0x8383cfff]
[ 0.265029] pci 0000:00:19.0: reg 0x18: [io 0x1040-0x105f]
[ 0.265086] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.265153] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.265169] pci 0000:00:1a.0: reg 0x10: [mem 0x8383f000-0x8383f3ff]
[ 0.265249] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.265330] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.265347] pci 0000:00:1b.0: reg 0x10: [mem 0x83838000-0x8383bfff 64bit]
[ 0.265423] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.265505] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.265590] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.265614] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.265617] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.265692] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.265777] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.265799] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 0.265801] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 0.265877] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.265982] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.266003] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.266005] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.266066] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.266082] pci 0000:00:1d.0: reg 0x10: [mem 0x83840000-0x838403ff]
[ 0.266163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.266242] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.266408] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.266420] pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087]
[ 0.266428] pci 0000:00:1f.2: reg 0x14: [io 0x1090-0x1093]
[ 0.266435] pci 0000:00:1f.2: reg 0x18: [io 0x1088-0x108f]
[ 0.266442] pci 0000:00:1f.2: reg 0x1c: [io 0x1094-0x1097]
[ 0.266450] pci 0000:00:1f.2: reg 0x20: [io 0x1060-0x107f]
[ 0.266457] pci 0000:00:1f.2: reg 0x24: [mem 0x8383e000-0x8383e7ff]
[ 0.266496] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.266565] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.266581] pci 0000:00:1f.3: reg 0x10: [mem 0x83841000-0x838410ff 64bit]
[ 0.266601] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.266688] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.266707] pci 0000:00:1f.6: reg 0x10: [mem 0x8383d000-0x8383dfff 64bit]
[ 0.266925] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.266931] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.266981] pci 0000:01:00.0: reg 0x10: [mem 0x82a00000-0x82a000ff]
[ 0.267303] pci 0000:01:00.0: supports D1 D2
[ 0.267304] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.267506] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.267512] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.267583] pci 0000:02:00.0: [168c:002a] type 00 class 0x028000
[ 0.267614] pci 0000:02:00.0: reg 0x10: [mem 0x82b00000-0x82b0ffff 64bit]
[ 0.267779] pci 0000:02:00.0: supports D1
[ 0.267780] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.267882] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.267892] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.267898] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.267957] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
[ 0.267961] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 0.267965] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff]
[ 0.267970] pci 0000:00:1c.2: bridge window [mem 0x47d600000-0x48d5fffff 64bit pref]
[ 0.268123] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268167] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268208] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268247] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268287] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268328] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268367] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268406] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.269028] ACPI: EC: interrupt unblocked
[ 0.269029] ACPI: EC: event unblocked
[ 0.269035] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.269036] ACPI: EC: GPE=0x11
[ 0.269037] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[ 0.269038] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.269090] iommu: Default domain type: Translated
[ 0.269383] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.269383] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.269383] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.269383] vgaarb: loaded
[ 0.269441] EDAC MC: Ver: 3.0.0
[ 0.269515] NetLabel: Initializing
[ 0.269515] NetLabel: domain hash size = 128
[ 0.269515] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.269515] NetLabel: unlabeled traffic allowed by default
[ 0.269515] PCI: Using ACPI for IRQ routing
[ 0.270981] PCI: pci_cache_line_size set to 64 bytes
[ 0.270985] pci 0000:00:1c.2: can't claim BAR 15 [mem 0x47d600000-0x48d5fffff 64bit pref]: no compatible bridge window
[ 0.271052] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.271054] e820: reserve RAM buffer [mem 0x7ff17000-0x7fffffff]
[ 0.271055] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff]
[ 0.271077] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.271082] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.277389] clocksource: Switched to clocksource tsc-early
[ 0.286672] VFS: Disk quotas dquot_6.6.0
[ 0.286686] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.286792] AppArmor: AppArmor Filesystem Enabled
[ 0.286808] pnp: PnP ACPI init
[ 0.286974] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.286975] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.286976] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.286978] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.286979] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.286980] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.286981] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.286982] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.286983] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.286985] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.286990] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287386] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.287390] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.287422] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.287423] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.287427] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287442] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.287467] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.287486] pnp 00:05: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[ 0.287505] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.287521] pnp: PnP ACPI: found 7 devices
[ 0.293119] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.293171] NET: Registered protocol family 2
[ 0.293293] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.293365] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.293586] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.293659] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.293712] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.293752] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.293835] NET: Registered protocol family 1
[ 0.293840] NET: Registered protocol family 44
[ 0.293851] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-0b] add_size 200000 add_align 100000
[ 0.293864] pci 0000:00:1c.2: BAR 15: assigned [mem 0x83900000-0x83afffff 64bit pref]
[ 0.293867] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.293873] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.293881] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.293885] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.293893] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
[ 0.293896] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 0.293900] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff]
[ 0.293904] pci 0000:00:1c.2: bridge window [mem 0x83900000-0x83afffff 64bit pref]
[ 0.293910] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.293912] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.293913] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.293913] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.293914] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.293915] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.293916] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.293917] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.293918] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.293919] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.293920] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.293921] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.293922] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.293923] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.293924] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.293925] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
[ 0.293926] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.293927] pci_bus 0000:01: resource 1 [mem 0x82a00000-0x82afffff]
[ 0.293928] pci_bus 0000:02: resource 1 [mem 0x82b00000-0x82bfffff]
[ 0.293929] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
[ 0.293930] pci_bus 0000:03: resource 1 [mem 0x83000000-0x837fffff]
[ 0.293931] pci_bus 0000:03: resource 2 [mem 0x83900000-0x83afffff 64bit pref]
[ 0.293987] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.294473] PCI: CLS 64 bytes, default 64
[ 0.294520] Trying to unpack rootfs image as initramfs...
[ 0.926720] Freeing initrd memory: 44732K
[ 0.926784] DMAR: No ATSR found
[ 0.926814] DMAR: dmar0: Using Queued invalidation
[ 0.926819] DMAR: dmar1: Using Queued invalidation
[ 0.998637] pci 0000:00:00.0: Adding to iommu group 0
[ 0.998649] pci 0000:00:02.0: Adding to iommu group 1
[ 0.998661] pci 0000:00:04.0: Adding to iommu group 2
[ 0.998672] pci 0000:00:14.0: Adding to iommu group 3
[ 0.998686] pci 0000:00:16.0: Adding to iommu group 4
[ 0.998696] pci 0000:00:19.0: Adding to iommu group 5
[ 0.998708] pci 0000:00:1a.0: Adding to iommu group 6
[ 0.998715] pci 0000:00:1b.0: Adding to iommu group 7
[ 0.998723] pci 0000:00:1c.0: Adding to iommu group 8
[ 0.998731] pci 0000:00:1c.1: Adding to iommu group 9
[ 0.998739] pci 0000:00:1c.2: Adding to iommu group 10
[ 0.998748] pci 0000:00:1d.0: Adding to iommu group 11
[ 0.998765] pci 0000:00:1f.0: Adding to iommu group 12
[ 0.998773] pci 0000:00:1f.2: Adding to iommu group 12
[ 0.998780] pci 0000:00:1f.3: Adding to iommu group 12
[ 0.998788] pci 0000:00:1f.6: Adding to iommu group 12
[ 0.998796] pci 0000:01:00.0: Adding to iommu group 13
[ 0.998804] pci 0000:02:00.0: Adding to iommu group 14
[ 1.000599] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.000600] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.000602] software IO TLB: mapped [mem 0x000000007bf17000-0x000000007ff17000] (64MB)
[ 1.000956] Initialise system trusted keyrings
[ 1.000964] Key type blacklist registered
[ 1.001004] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.001966] zbud: loaded
[ 1.002111] integrity: Platform Keyring initialized
[ 1.002113] Key type asymmetric registered
[ 1.002114] Asymmetric key parser 'x509' registered
[ 1.002121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.002159] io scheduler mq-deadline registered
[ 1.002412] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[ 1.002586] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
[ 1.002750] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
[ 1.002776] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 1.002890] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.002900] intel_idle: MWAIT substates: 0x21120
[ 1.002902] intel_idle: v0.5.1 model 0x3A
[ 1.003055] intel_idle: Local APIC timer is reliable in all C-states
[ 1.004402] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.004404] ACPI: Thermal Zone [THM0] (54 C)
[ 1.005187] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.005189] ACPI: Thermal Zone [THM1] (27 C)
[ 1.005283] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.005682] Linux agpgart interface v0.103
[ 1.005712] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.005713] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.005902] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.007516] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.007520] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.007603] mousedev: PS/2 mouse device common for all mice
[ 1.007635] rtc_cmos 00:03: RTC can wake from S4
[ 1.007814] rtc_cmos 00:03: registered as rtc0
[ 1.007841] rtc_cmos 00:03: setting system clock to 2021-04-20T14:18:55 UTC (1618928335)
[ 1.007854] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.007862] intel_pstate: Intel P-state driver initializing
[ 1.008075] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.008345] NET: Registered protocol family 10
[ 1.008868] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.013990] Segment Routing with IPv6
[ 1.014009] mip6: Mobile IPv6
[ 1.014011] NET: Registered protocol family 17
[ 1.014060] mpls_gso: MPLS GSO support
[ 1.014247] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.014276] microcode: Microcode Update Driver: v2.2.
[ 1.014280] IPI shorthand broadcast: enabled
[ 1.014285] sched_clock: Marking stable (1013747630, 452475)->(1019071305, -4871200)
[ 1.014369] registered taskstats version 1
[ 1.014371] Loading compiled-in X.509 certificates
[ 1.042271] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.042282] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 1.042298] zswap: loaded using pool lzo/zbud
[ 1.042454] Key type ._fscrypt registered
[ 1.042467] Key type .fscrypt registered
[ 1.042468] Key type fscrypt-provisioning registered
[ 1.042495] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.043539] Freeing unused kernel image (initmem) memory: 2388K
[ 1.069410] Write protecting the kernel read-only data: 22528k
[ 1.069880] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.069995] Freeing unused kernel image (rodata/data gap) memory: 644K
[ 1.112065] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.112067] x86/mm: Checking user space page tables
[ 1.151978] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.151984] Run /init as init process
[ 1.151985] with arguments:
[ 1.151986] /init
[ 1.151986] with environment:
[ 1.151987] HOME=/
[ 1.151987] TERM=linux
[ 1.151988] BOOT_IMAGE=/vmlinuz-5.10.0-6-amd64
[ 1.249326] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input2
[ 1.257843] pps_core: LinuxPPS API ver. 1 registered
[ 1.257845] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.259413] PTP clock support registered
[ 1.267076] ACPI: Sleep Button [SLPB]
[ 1.267143] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input3
[ 1.267187] ACPI: Lid Switch [LID]
[ 1.267238] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.267276] ACPI: Power Button [PWRF]
[ 1.283545] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200925/utaddress-204)
[ 1.283552] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.283556] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.283560] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.283561] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.283565] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.283566] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.283570] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.283571] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.295846] sdhci: Secure Digital Host Controller Interface driver
[ 1.295848] sdhci: Copyright(c) Pierre Ossman
[ 1.301025] cryptd: max_cpu_qlen set to 1000
[ 1.302857] ACPI: bus type USB registered
[ 1.302882] usbcore: registered new interface driver usbfs
[ 1.302893] usbcore: registered new interface driver hub
[ 1.302904] usbcore: registered new device driver usb
[ 1.305133] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.305341] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.307591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.308386] ehci-pci: EHCI PCI platform driver
[ 1.308547] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.308555] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.308570] ehci-pci 0000:00:1a.0: debug port 2
[ 1.312491] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.312511] ehci-pci 0000:00:1a.0: irq 19, io mem 0x8383f000
[ 1.321589] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.321835] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 1.323598] AVX version of gcm_enc/dec engaged.
[ 1.323599] AES CTR mode by8 optimization enabled
[ 1.328912] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.329044] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.329115] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1.329125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.329126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.329128] usb usb1: Product: EHCI Host Controller
[ 1.329129] usb usb1: Manufacturer: Linux 5.10.0-6-amd64 ehci_hcd
[ 1.329130] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.330624] hub 1-0:1.0: USB hub found
[ 1.330634] hub 1-0:1.0: 3 ports detected
[ 1.330934] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.330941] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.330952] ehci-pci 0000:00:1d.0: debug port 2
[ 1.334701] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.334889] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.334911] ehci-pci 0000:00:1d.0: irq 18, io mem 0x83840000
[ 1.337513] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.339238] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 1.341151] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.341153] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.341322] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.345102] SCSI subsystem initialized
[ 1.352058] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.352125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.352127] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.352128] usb usb2: Product: EHCI Host Controller
[ 1.352129] usb usb2: Manufacturer: Linux 5.10.0-6-amd64 ehci_hcd
[ 1.352130] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.352325] hub 2-0:1.0: USB hub found
[ 1.352381] hub 2-0:1.0: 3 ports detected
[ 1.352527] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.352535] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.353625] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.353632] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.353838] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.353839] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.353841] usb usb3: Product: xHCI Host Controller
[ 1.353842] usb usb3: Manufacturer: Linux 5.10.0-6-amd64 xhci-hcd
[ 1.353844] usb usb3: SerialNumber: 0000:00:14.0
[ 1.353951] hub 3-0:1.0: USB hub found
[ 1.353964] hub 3-0:1.0: 4 ports detected
[ 1.354143] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.354147] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.354150] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.354209] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.354211] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.354212] usb usb4: Product: xHCI Host Controller
[ 1.354213] usb usb4: Manufacturer: Linux 5.10.0-6-amd64 xhci-hcd
[ 1.354215] usb usb4: SerialNumber: 0000:00:14.0
[ 1.354311] hub 4-0:1.0: USB hub found
[ 1.354323] hub 4-0:1.0: 4 ports detected
[ 1.366864] libata version 3.00 loaded.
[ 1.370448] ahci 0000:00:1f.2: version 3.0
[ 1.370591] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.380675] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.380677] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.381313] scsi host0: ahci
[ 1.381488] scsi host1: ahci
[ 1.381610] scsi host2: ahci
[ 1.381731] scsi host3: ahci
[ 1.381848] scsi host4: ahci
[ 1.381963] scsi host5: ahci
[ 1.382016] ata1: SATA max UDMA/133 abar m2048@0x8383e000 port 0x8383e100 irq 31
[ 1.382019] ata2: SATA max UDMA/133 abar m2048@0x8383e000 port 0x8383e180 irq 31
[ 1.382021] ata3: SATA max UDMA/133 abar m2048@0x8383e000 port 0x8383e200 irq 31
[ 1.382023] ata4: DUMMY
[ 1.382023] ata5: DUMMY
[ 1.382024] ata6: DUMMY
[ 1.452848] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.458302] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 1.458305] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.458333] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory
[ 1.510238] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.553131] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:5f:1b:41
[ 1.553133] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.553190] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.554140] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 1.569284] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 1.569447] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.594028] acpi device:0d: registered as cooling_device5
[ 1.594067] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.685431] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.689379] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.696211] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.803037] fbcon: i915drmfb (fb0) is primary device
[ 1.846181] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.846184] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.846791] hub 1-1:1.0: USB hub found
[ 1.847259] hub 1-1:1.0: 6 ports detected
[ 1.857755] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.857758] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.858166] hub 2-1:1.0: USB hub found
[ 1.858324] hub 2-1:1.0: 8 ports detected
[ 2.008306] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.009542] tsc: Refined TSC clocksource calibration: 2893.428 MHz
[ 2.009553] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502e9c9f, max_idle_ns: 440795289850 ns
[ 2.009577] clocksource: Switched to clocksource tsc
[ 2.124189] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 2.137467] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[ 2.149422] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
[ 2.155562] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 2.216135] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 2.216144] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.254917] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.257823] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18
[ 2.257826] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.257828] usb 1-1.6: Product: Integrated Camera
[ 2.257829] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.261872] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.261875] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.262315] hub 2-1.8:1.0: USB hub found
[ 2.262438] hub 2-1.8:1.0: 6 ports detected
[ 2.324092] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.324552] ata3.00: supports DRM functions and may not be fully accessible
[ 2.324725] ata3.00: ATA-11: KINGSTON SUV500MS480G, 003056RR, max UDMA/133
[ 2.324729] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.325656] ata3.00: Trusted Computing capability qword not valid!
[ 2.326319] ata3.00: supports DRM functions and may not be fully accessible
[ 2.327301] ata3.00: Trusted Computing capability qword not valid!
[ 2.327308] ata3.00: configured for UDMA/133
[ 2.327675] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RR PQ: 0 ANSI: 5
[ 2.606623] i915 0000:00:02.0: [drm] *ERROR* uncleared fifo underrun on pipe A
[ 2.606626] i915 0000:00:02.0: [drm] *ERROR* CPU pipe A FIFO underrun
[ 2.609441] i915 0000:00:02.0: [drm] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 2.609443] i915 0000:00:02.0: [drm] *ERROR* PCH transcoder A FIFO underrun
[ 2.622985] Console: switching to colour frame buffer device 170x48
[ 2.645717] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.676928] sd 2:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 2.676932] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 2.676944] sd 2:0:0:0: [sda] Write Protect is off
[ 2.676947] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.677501] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.718330] sda: sda1 sda2 < sda5 >
[ 2.718972] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.891020] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.901369] device-mapper: uevent: version 1.0.3
[ 2.901495] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 3.169178] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 7.324139] PM: Image not found (code -22)
[ 7.421719] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.589969] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 7.971953] systemd[1]: Inserted module 'autofs4'
[ 7.994415] systemd[1]: systemd 247.3-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 8.013695] systemd[1]: Detected architecture x86-64.
[ 8.014914] systemd[1]: Set hostname to <gold>.
[ 8.388474] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 8.479645] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.498599] systemd[1]: Created slice system-getty.slice.
[ 8.498940] systemd[1]: Created slice system-modprobe.slice.
[ 8.499219] systemd[1]: Created slice Cryptsetup Units Slice.
[ 8.499455] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 8.499694] systemd[1]: Created slice system-tor.slice.
[ 8.499906] systemd[1]: Created slice User and Session Slice.
[ 8.500036] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.500196] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.500273] systemd[1]: Reached target User and Group Name Lookups.
[ 8.500293] systemd[1]: Reached target Remote File Systems.
[ 8.500304] systemd[1]: Reached target Slices.
[ 8.500382] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 8.500486] systemd[1]: Listening on LVM2 poll daemon socket.
[ 8.500564] systemd[1]: Listening on Syslog Socket.
[ 8.500642] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.500691] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.500831] systemd[1]: Listening on Journal Audit Socket.
[ 8.500909] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.501007] systemd[1]: Listening on Journal Socket.
[ 8.501481] systemd[1]: Listening on udev Control Socket.
[ 8.501561] systemd[1]: Listening on udev Kernel Socket.
[ 8.502273] systemd[1]: Mounting Huge Pages File System...
[ 8.503011] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.504028] systemd[1]: Mounting Kernel Debug File System...
[ 8.505080] systemd[1]: Mounting Kernel Trace File System...
[ 8.505313] systemd[1]: Finished Availability of block devices.
[ 8.506518] systemd[1]: Starting Set the console keyboard layout...
[ 8.507437] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 8.508211] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 8.509225] systemd[1]: Starting Load Kernel Module configfs...
[ 8.510230] systemd[1]: Starting Load Kernel Module drm...
[ 8.511207] systemd[1]: Starting Load Kernel Module fuse...
[ 8.512520] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 8.512571] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 8.514090] systemd[1]: Starting Journal Service...
[ 8.518322] systemd[1]: Starting Load Kernel Modules...
[ 8.519268] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.520425] systemd[1]: Starting Coldplug All udev Devices...
[ 8.522858] systemd[1]: Mounted Huge Pages File System.
[ 8.523108] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.523292] systemd[1]: Mounted Kernel Debug File System.
[ 8.523489] systemd[1]: Mounted Kernel Trace File System.
[ 8.523995] systemd[1]: Finished Set the console keyboard layout.
[ 8.524507] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 8.524847] systemd[1]: modprobe@configfs.service: Succeeded.
[ 8.525294] systemd[1]: Finished Load Kernel Module configfs.
[ 8.525556] systemd[1]: modprobe@drm.service: Succeeded.
[ 8.525708] systemd[1]: Finished Load Kernel Module drm.
[ 8.526777] systemd[1]: Mounting Kernel Configuration File System...
[ 8.529499] systemd[1]: Mounted Kernel Configuration File System.
[ 8.536618] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 8.536728] fuse: init (API version 7.32)
[ 8.537837] systemd[1]: modprobe@fuse.service: Succeeded.
[ 8.538101] systemd[1]: Finished Load Kernel Module fuse.
[ 8.539012] systemd[1]: Mounting FUSE Control File System...
[ 8.539573] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 8.540627] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 8.540686] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 8.541523] systemd[1]: Starting Load/Save Random Seed...
[ 8.542663] systemd[1]: Starting Create System Users...
[ 8.543853] systemd[1]: Mounted FUSE Control File System.
[ 8.547498] systemd[1]: Finished Load Kernel Modules.
[ 8.548740] systemd[1]: Starting Apply Kernel Variables...
[ 8.556202] systemd[1]: Finished Load/Save Random Seed.
[ 8.556417] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 8.563247] systemd[1]: Finished Create System Users.
[ 8.564435] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.566158] systemd[1]: Finished Apply Kernel Variables.
[ 8.579037] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 8.581578] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 8.581711] systemd[1]: Reached target Local File Systems (Pre).
[ 8.583497] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 8.603522] systemd[1]: Started Journal Service.
[ 8.612140] systemd-journald[418]: Received client request to flush runtime journal.
[ 8.788591] ACPI: AC Adapter [AC] (on-line)
[ 8.801639] Non-volatile memory driver v1.3
[ 8.836460] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 8.836463] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 8.836464] thinkpad_acpi: ThinkPad BIOS CBET4000 4.13-3305-g8f3e1192df-dirty, EC G2HT35WW-3.22
[ 8.836465] thinkpad_acpi: Lenovo ThinkPad X230, model 232566G
[ 8.840149] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 8.840341] iTCO_vendor_support: vendor-support=0
[ 8.841833] thinkpad_acpi: radio switch found; radios are enabled
[ 8.841936] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 8.841951] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 8.841952] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 8.845117] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 8.849330] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 8.849411] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 8.850853] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 8.850859] battery: new extension: ThinkPad Battery Extension
[ 8.850904] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 8.859100] at24 0-0050: supply vcc not found, using dummy regulator
[ 8.859741] at24 0-0050: 256 byte spd EEPROM, read-only
[ 8.859770] at24 0-0051: supply vcc not found, using dummy regulator
[ 8.860879] at24 0-0051: 256 byte spd EEPROM, read-only
[ 8.861316] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.861360] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 8.861652] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.909758] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 8.913526] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 8.927661] mc: Linux media interface: v0.10
[ 8.930867] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 8.930868] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 8.930869] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 8.930870] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 8.945202] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.946416] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 8.946692] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 8.946959] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.953780] videodev: Linux video capture interface: v2.00
[ 8.955204] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 8.962982] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 9.082785] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 9.119080] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[ 9.119166] usbcore: registered new interface driver uvcvideo
[ 9.119167] USB Video Class driver (1.1.1)
[ 9.220565] intel_rapl_common: Found RAPL domain package
[ 9.220568] intel_rapl_common: Found RAPL domain core
[ 9.220570] intel_rapl_common: Found RAPL domain uncore
[ 9.261792] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 9.265135] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 9.265141] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 9.273443] Adding 1003516k swap on /dev/mapper/gold--vg-swap_1. Priority:-2 extents:1 across:1003516k SSFS
[ 9.282927] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.310668] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.310671] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.310673] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 9.310675] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.310676] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.310677] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 9.310679] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 9.310680] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 9.333392] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.333454] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.333502] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.333550] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.333592] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 9.333638] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 9.333687] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 9.333733] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 9.337746] audit: type=1400 audit(1618928343.825:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=543 comm="apparmor_parser"
[ 9.339527] audit: type=1400 audit(1618928343.825:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=542 comm="apparmor_parser"
[ 9.346183] audit: type=1400 audit(1618928343.833:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=540 comm="apparmor_parser"
[ 9.346188] audit: type=1400 audit(1618928343.833:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=540 comm="apparmor_parser"
[ 9.346191] audit: type=1400 audit(1618928343.833:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=540 comm="apparmor_parser"
[ 9.351029] audit: type=1400 audit(1618928343.837:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=547 comm="apparmor_parser"
[ 9.352565] audit: type=1400 audit(1618928343.837:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=549 comm="apparmor_parser"
[ 9.361435] audit: type=1400 audit(1618928343.849:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=550 comm="apparmor_parser"
[ 9.361441] audit: type=1400 audit(1618928343.849:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=550 comm="apparmor_parser"
[ 9.363002] audit: type=1400 audit(1618928343.849:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=548 comm="apparmor_parser"
[ 9.706292] ath: EEPROM regdomain: 0x6a
[ 9.706293] ath: EEPROM indicates we should expect a direct regpair map
[ 9.706294] ath: Country alpha2 being used: 00
[ 9.706295] ath: Regpair used: 0x6a
[ 9.712986] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.713322] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffad4900530000, irq=17
[ 9.723301] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 10.805429] mei_me 0000:00:16.0: wait hw ready failed
[ 10.806163] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 10.806840] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 12.825480] mei_me 0000:00:16.0: wait hw ready failed
[ 12.825496] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 12.825532] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 14.841483] mei_me 0000:00:16.0: wait hw ready failed
[ 14.841499] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 14.841521] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 14.841525] mei_me 0000:00:16.0: reset failed ret = -19
[ 14.841527] mei_me 0000:00:16.0: link layer initialization failed.
[ 14.841528] mei_me 0000:00:16.0: init hw failure.
[ 14.841591] mei_me 0000:00:16.0: initialization failed.
[ 16.819635] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 16.819675] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[ 17.429852] rfkill: input handler disabled
[ 19.282486] wlp2s0: authenticate with e0:63:da:78:a1:b8
[ 19.299347] wlp2s0: send auth to e0:63:da:78:a1:b8 (try 1/3)
[ 19.301609] wlp2s0: authenticated
[ 19.305433] wlp2s0: associate with e0:63:da:78:a1:b8 (try 1/3)
[ 19.309560] wlp2s0: RX AssocResp from e0:63:da:78:a1:b8 (capab=0x411 status=0 aid=1)
[ 19.309751] wlp2s0: associated
[ 19.342352] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 19.935992] kauditd_printk_skb: 7 callbacks suppressed
[ 19.935994] audit: type=1400 audit(1618928354.421:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1159 comm="apparmor_parser"
[ 20.031269] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 20.032993] Bridge firewalling registered
[ 20.169248] Initializing XFRM netlink socket
[ 22.838365] rfkill: input handler enabled
[ 25.397040] rfkill: input handler disabled
[ 478.833665] docker0: port 1(vethc2645bd) entered blocking state
[ 478.833668] docker0: port 1(vethc2645bd) entered disabled state
[ 478.833997] device vethc2645bd entered promiscuous mode
[ 479.147350] eth0: renamed from vethd6caed2
[ 479.167228] IPv6: ADDRCONF(NETDEV_CHANGE): vethc2645bd: link becomes ready
[ 479.167297] docker0: port 1(vethc2645bd) entered blocking state
[ 479.167299] docker0: port 1(vethc2645bd) entered forwarding state
[ 479.167351] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 834.069017] docker0: port 1(vethc2645bd) entered disabled state
[ 834.069140] vethd6caed2: renamed from eth0
[ 834.128125] docker0: port 1(vethc2645bd) entered disabled state
[ 834.130617] device vethc2645bd left promiscuous mode
[ 834.130626] docker0: port 1(vethc2645bd) entered disabled state