| [ 0.000000] Linux version 5.4.0-rc4-00001-g248e7f8ae551 (martin@laptop) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #71 SMP Mon Oct 21 06:59:35 CEST 2019 |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-rc4-00001-g248e7f8ae551 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff22fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff23000-0x00000000c29fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 232566G/232566G, BIOS CBET4000 4.10-1082-g4357a82076-dirty 10/20/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.294 MHz processor |
| [ 0.000993] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000994] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000998] last_pfn = 0x43d600 max_arch_pfn = 0x400000000 |
| [ 0.001002] MTRR default type: write-back |
| [ 0.001002] MTRR fixed ranges enabled: |
| [ 0.001004] 00000-9FFFF write-back |
| [ 0.001004] A0000-BFFFF uncachable |
| [ 0.001005] C0000-FFFFF write-back |
| [ 0.001005] MTRR variable ranges enabled: |
| [ 0.001007] 0 base 0C0000000 mask FF0000000 uncachable |
| [ 0.001008] 1 base 0D0000000 mask FF0000000 write-combining |
| [ 0.001008] 2 base 0E0000000 mask FE0000000 uncachable |
| [ 0.001009] 3 disabled |
| [ 0.001009] 4 disabled |
| [ 0.001009] 5 disabled |
| [ 0.001010] 6 disabled |
| [ 0.001010] 7 disabled |
| [ 0.001011] 8 disabled |
| [ 0.001011] 9 disabled |
| [ 0.001295] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.001663] last_pfn = 0xbff23 max_arch_pfn = 0x400000000 |
| [ 0.011298] BRK [0x2dcc01000, 0x2dcc01fff] PGTABLE |
| [ 0.011300] BRK [0x2dcc02000, 0x2dcc02fff] PGTABLE |
| [ 0.011301] BRK [0x2dcc03000, 0x2dcc03fff] PGTABLE |
| [ 0.011330] BRK [0x2dcc04000, 0x2dcc04fff] PGTABLE |
| [ 0.011332] BRK [0x2dcc05000, 0x2dcc05fff] PGTABLE |
| [ 0.011418] BRK [0x2dcc06000, 0x2dcc06fff] PGTABLE |
| [ 0.011429] BRK [0x2dcc07000, 0x2dcc07fff] PGTABLE |
| [ 0.011451] BRK [0x2dcc08000, 0x2dcc08fff] PGTABLE |
| [ 0.011610] RAMDISK: [mem 0x35193000-0x368c0fff] |
| [ 0.011614] ACPI: Early table checksum verification disabled |
| [ 0.011617] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.011620] ACPI: XSDT 0x00000000BFF470E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011626] ACPI: FACP 0x00000000BFF4ABC0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011630] ACPI: DSDT 0x00000000BFF47280 003937 (v02 COREv4 COREBOOT 20110725 INTL 20190703) |
| [ 0.011633] ACPI: FACS 0x00000000BFF47240 000040 |
| [ 0.011635] ACPI: FACS 0x00000000BFF47240 000040 |
| [ 0.011637] ACPI: SSDT 0x00000000BFF4ACC0 001A8B (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.011640] ACPI: MCFG 0x00000000BFF4C750 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011642] ACPI: TCPA 0x00000000BFF4C790 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011645] ACPI: APIC 0x00000000BFF4C7D0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011647] ACPI: DMAR 0x00000000BFF4C840 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011650] ACPI: HPET 0x00000000BFF4E910 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.011656] ACPI: Local APIC address 0xfee00000 |
| [ 0.011732] No NUMA configuration found |
| [ 0.011733] Faking a node at [mem 0x0000000000000000-0x000000043d5fffff] |
| [ 0.011736] NODE_DATA(0) allocated [mem 0x43d5ef000-0x43d5f3fff] |
| [ 0.011767] Zone ranges: |
| [ 0.011768] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.011769] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.011770] Normal [mem 0x0000000100000000-0x000000043d5fffff] |
| [ 0.011771] Device empty |
| [ 0.011772] Movable zone start for each node |
| [ 0.011772] Early memory node ranges |
| [ 0.011773] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.011775] node 0: [mem 0x0000000000100000-0x00000000bff22fff] |
| [ 0.011776] node 0: [mem 0x0000000100000000-0x000000043d5fffff] |
| [ 0.011783] Zeroed struct page in unavailable ranges: 319 pages |
| [ 0.011784] Initmem setup node 0 [mem 0x0000000000001000-0x000000043d5fffff] |
| [ 0.011786] On node 0 totalpages: 4183233 |
| [ 0.011787] DMA zone: 64 pages used for memmap |
| [ 0.011787] DMA zone: 21 pages reserved |
| [ 0.011788] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.011833] DMA32 zone: 12221 pages used for memmap |
| [ 0.011834] DMA32 zone: 782115 pages, LIFO batch:63 |
| [ 0.021529] Normal zone: 53080 pages used for memmap |
| [ 0.021530] Normal zone: 3397120 pages, LIFO batch:63 |
| [ 0.057976] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff] |
| [ 0.058169] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.058171] ACPI: Local APIC address 0xfee00000 |
| [ 0.058187] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.058189] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.058190] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.058192] ACPI: IRQ0 used by override. |
| [ 0.058193] ACPI: IRQ9 used by override. |
| [ 0.058195] Using ACPI (MADT) for SMP configuration information |
| [ 0.058197] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.058201] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.058211] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.058212] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.058213] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.058214] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.058215] PM: Registered nosave memory: [mem 0xbff23000-0xc29fffff] |
| [ 0.058216] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff] |
| [ 0.058217] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.058217] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.058218] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.058219] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.058220] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.058220] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.058222] [mem 0xc2a00000-0xefffffff] available for PCI devices |
| [ 0.058223] Booting paravirtualized kernel on bare hardware |
| [ 0.058226] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.144641] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.144840] percpu: Embedded 53 pages/cpu s178264 r8192 d30632 u524288 |
| [ 0.144846] pcpu-alloc: s178264 r8192 d30632 u524288 alloc=1*2097152 |
| [ 0.144847] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.144866] Built 1 zonelists, mobility grouping on. Total pages: 4117847 |
| [ 0.144867] Policy zone: Normal |
| [ 0.144869] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-rc4-00001-g248e7f8ae551 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed |
| [ 0.145790] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| [ 0.146237] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.146285] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.149866] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.149872] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.192035] Memory: 16330856K/16732932K available (10243K kernel code, 1171K rwdata, 3496K rodata, 1660K init, 2180K bss, 402076K reserved, 0K cma-reserved) |
| [ 0.192126] Kernel/User page tables isolation: enabled |
| [ 0.192141] ftrace: allocating 32645 entries in 128 pages |
| [ 0.203591] rcu: Hierarchical RCU implementation. |
| [ 0.203592] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.203594] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.203594] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.206263] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.206480] random: get_random_bytes called from start_kernel+0x339/0x51d with crng_init=0 |
| [ 0.206905] Console: colour dummy device 80x25 |
| [ 0.207021] printk: console [tty0] enabled |
| [ 0.207038] ACPI: Core revision 20190816 |
| [ 0.207109] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.207125] APIC: Switch to symmetric I/O mode setup |
| [ 0.207128] DMAR: Host address width 36 |
| [ 0.207130] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.207135] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.207138] DMAR: RMRR base: 0x000000c0800000 end: 0x000000c29fffff |
| [ 0.207140] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.207143] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.207146] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.207148] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.207150] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.207591] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.207594] x2apic enabled |
| [ 0.207602] Switched APIC routing to cluster x2apic. |
| [ 0.208038] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.227127] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b483f0c36, max_idle_ns: 440795226749 ns |
| [ 0.227132] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.58 BogoMIPS (lpj=11573176) |
| [ 0.227136] pid_max: default: 32768 minimum: 301 |
| [ 0.227178] LSM: Security Framework initializing |
| [ 0.227190] Yama: becoming mindful. |
| [ 0.227198] SELinux: Initializing. |
| [ 0.227214] *** VALIDATE SELinux *** |
| [ 0.227217] TOMOYO Linux initialized |
| [ 0.227262] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.227296] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.227314] *** VALIDATE tmpfs *** |
| [ 0.227439] *** VALIDATE proc *** |
| [ 0.227485] *** VALIDATE cgroup1 *** |
| [ 0.227488] *** VALIDATE cgroup2 *** |
| [ 0.227534] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.227544] process: using mwait in idle threads |
| [ 0.227548] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.227549] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.227553] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.227555] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.227557] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.227559] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.227561] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.227563] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.227566] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.227570] MDS: Mitigation: Clear CPU buffers |
| [ 0.227720] Freeing SMP alternatives memory: 32K |
| [ 0.229350] TSC deadline timer enabled |
| [ 0.229353] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.229443] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.229451] ... version: 3 |
| [ 0.229452] ... bit width: 48 |
| [ 0.229453] ... generic registers: 4 |
| [ 0.229455] ... value mask: 0000ffffffffffff |
| [ 0.229456] ... max period: 00007fffffffffff |
| [ 0.229458] ... fixed-purpose events: 3 |
| [ 0.229459] ... event mask: 000000070000000f |
| [ 0.229492] rcu: Hierarchical SRCU implementation. |
| [ 0.229962] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.230006] smp: Bringing up secondary CPUs ... |
| [ 0.230092] x86: Booting SMP configuration: |
| [ 0.230094] .... node #0, CPUs: #1 |
| [ 0.231130] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.231130] #2 #3 |
| [ 0.233569] smp: Brought up 1 node, 4 CPUs |
| [ 0.233569] smpboot: Max logical packages: 1 |
| [ 0.233569] smpboot: Total of 4 processors activated (23146.35 BogoMIPS) |
| [ 0.235164] devtmpfs: initialized |
| [ 0.235182] x86/mm: Memory block size: 128MB |
| [ 0.236809] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.236809] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.236809] pinctrl core: initialized pinctrl subsystem |
| [ 0.236809] NET: Registered protocol family 16 |
| [ 0.236809] audit: initializing netlink subsys (disabled) |
| [ 0.236809] audit: type=2000 audit(1571649327.028:1): state=initialized audit_enabled=0 res=1 |
| [ 0.236809] cpuidle: using governor ladder |
| [ 0.236809] cpuidle: using governor menu |
| [ 0.236809] ACPI: bus type PCI registered |
| [ 0.236809] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.236809] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.236809] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.236809] PCI: Using configuration type 1 for base access |
| [ 0.236809] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.236809] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.524040] ACPI: Added _OSI(Module Device) |
| [ 0.524040] ACPI: Added _OSI(Processor Device) |
| [ 0.524040] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.524040] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.524040] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.524040] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.524040] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.527133] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.527133] ACPI: EC: EC started |
| [ 0.527133] ACPI: EC: interrupt blocked |
| [ 0.527133] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.527133] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.527133] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.527133] ACPI: Interpreter enabled |
| [ 0.527133] ACPI: (supports S0 S3 S4 S5) |
| [ 0.527133] ACPI: Using IOAPIC for interrupt routing |
| [ 0.527133] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.527133] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.531132] ACPI: Power Resource [FPWR] (off) |
| [ 0.531132] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.531132] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.531132] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR] |
| [ 0.531132] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.531147] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff]) |
| [ 0.531149] PCI host bridge to bus 0000:00 |
| [ 0.531149] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.531149] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.531149] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.531149] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.531149] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] |
| [ 0.531149] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.531149] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.531149] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.531149] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit] |
| [ 0.531149] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.531149] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit] |
| [ 0.531149] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.531149] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.531149] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit] |
| [ 0.531149] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.531149] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.531149] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff] |
| [ 0.531149] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff] |
| [ 0.531149] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.531149] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.531149] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.531149] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff] |
| [ 0.535132] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.535132] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.535132] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit] |
| [ 0.535132] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.535132] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.535132] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.535132] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.535132] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.535132] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.535132] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.535132] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.535132] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff] |
| [ 0.535132] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.535132] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.535136] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.535136] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.535136] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.535136] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.535136] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.535136] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.535136] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff] |
| [ 0.535136] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.535136] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.535136] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit] |
| [ 0.535136] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.535136] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.535136] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit] |
| [ 0.535136] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501 |
| [ 0.535136] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.535136] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff] |
| [ 0.535136] pci 0000:01:00.0: supports D1 D2 |
| [ 0.535136] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.535136] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.535136] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.535136] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 |
| [ 0.535136] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit] |
| [ 0.535136] pci 0000:02:00.0: supports D1 |
| [ 0.535136] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold |
| [ 0.535136] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.535136] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.535136] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.535136] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.535136] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.535136] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.535136] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.535136] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.535136] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.535136] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.535136] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.535136] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.535136] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.535136] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.539133] ACPI: EC: interrupt unblocked |
| [ 0.539133] ACPI: EC: event unblocked |
| [ 0.539133] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.539133] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.539140] iommu: Default domain type: Translated |
| [ 0.539152] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.539152] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.539152] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.539152] vgaarb: loaded |
| [ 0.539203] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.539205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.539210] PTP clock support registered |
| [ 0.539217] EDAC MC: Ver: 3.0.0 |
| [ 0.539309] PCI: Using ACPI for IRQ routing |
| [ 0.540614] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.540690] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.540691] e820: reserve RAM buffer [mem 0xbff23000-0xbfffffff] |
| [ 0.540692] e820: reserve RAM buffer [mem 0x43d600000-0x43fffffff] |
| [ 0.540795] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.540795] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.543147] clocksource: Switched to clocksource tsc-early |
| [ 0.553659] *** VALIDATE bpf *** |
| [ 0.553733] VFS: Disk quotas dquot_6.6.0 |
| [ 0.553752] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.553777] *** VALIDATE ramfs *** |
| [ 0.553782] *** VALIDATE hugetlbfs *** |
| [ 0.553838] pnp: PnP ACPI init |
| [ 0.553981] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| [ 0.554009] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.554012] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.554014] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.554017] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.554019] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.554022] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.554025] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.554028] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.554030] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.554033] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.554039] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.554445] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.554450] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.554486] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.554488] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.554492] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.554511] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.554537] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.554559] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.554580] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.554597] pnp: PnP ACPI: found 7 devices |
| [ 0.555834] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.555834] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.555837] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.555838] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.560335] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.560376] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.560384] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.560397] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.560404] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.560416] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.560419] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.560426] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.560432] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.560442] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.560444] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.560446] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.560448] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.560450] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.560452] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.560455] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.560457] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.560459] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.560461] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.560463] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.560465] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.560468] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.560470] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.560472] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.560474] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window] |
| [ 0.560476] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.560478] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff] |
| [ 0.560480] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff] |
| [ 0.560483] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.560484] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff] |
| [ 0.560487] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.560571] NET: Registered protocol family 2 |
| [ 0.560704] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) |
| [ 0.560725] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| [ 0.560872] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.560993] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.561019] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.561052] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.561127] NET: Registered protocol family 1 |
| [ 0.561141] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.561656] PCI: CLS 64 bytes, default 64 |
| [ 0.561697] Trying to unpack rootfs image as initramfs... |
| [ 0.909665] Freeing initrd memory: 23736K |
| [ 0.927160] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.927168] software IO TLB: mapped [mem 0xbbf23000-0xbff23000] (64MB) |
| [ 0.927637] Initialise system trusted keyrings |
| [ 0.927687] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.927716] zbud: loaded |
| [ 0.927979] Key type asymmetric registered |
| [ 0.927982] Asymmetric key parser 'x509' registered |
| [ 0.927990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 0.928027] io scheduler mq-deadline registered |
| [ 0.928030] io scheduler kyber registered |
| [ 0.928301] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| [ 0.928526] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| [ 0.928745] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 |
| [ 0.928776] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.928921] intel_idle: MWAIT substates: 0x21120 |
| [ 0.928921] intel_idle: v0.4.1 model 0x3A |
| [ 0.929117] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.929669] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.930202] Linux agpgart interface v0.103 |
| [ 0.935188] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 0.983439] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.983442] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 0.983810] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.985757] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.985763] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.985970] mousedev: PS/2 mouse device common for all mice |
| [ 0.986023] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.986224] rtc_cmos 00:03: registered as rtc0 |
| [ 0.986240] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.986251] intel_pstate: Intel P-state driver initializing |
| [ 0.986467] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.986683] drop_monitor: Initializing network drop monitor service |
| [ 0.986846] NET: Registered protocol family 10 |
| [ 0.987263] Segment Routing with IPv6 |
| [ 0.987358] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 0.987562] mip6: Mobile IPv6 |
| [ 0.987568] NET: Registered protocol family 17 |
| [ 0.987575] mpls_gso: MPLS GSO support |
| [ 0.987953] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 0.988105] microcode: Microcode Update Driver: v2.2. |
| [ 0.988109] IPI shorthand broadcast: enabled |
| [ 0.988131] sched_clock: Marking stable (987413937, 683267)->(992699962, -4602758) |
| [ 0.988391] registered taskstats version 1 |
| [ 0.988398] Loading compiled-in X.509 certificates |
| [ 0.988440] zswap: loaded using pool lzo/zbud |
| [ 0.988568] ima: Allocated hash algorithm: sha256 |
| [ 1.119227] ima: No architecture policies found |
| [ 1.119920] rtc_cmos 00:03: setting system clock to 2019-10-21T09:15:28 UTC (1571649328) |
| [ 1.122854] Freeing unused kernel image memory: 1660K |
| [ 1.122910] Write protecting the kernel read-only data: 16384k |
| [ 1.123670] Freeing unused kernel image memory: 2012K |
| [ 1.123921] Freeing unused kernel image memory: 600K |
| [ 1.135135] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.135138] x86/mm: Checking user space page tables |
| [ 1.141340] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.141343] Run /init as init process |
| [ 1.211222] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.211304] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.211314] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.242883] ACPI: bus type USB registered |
| [ 1.242903] usbcore: registered new interface driver usbfs |
| [ 1.242911] usbcore: registered new interface driver hub |
| [ 1.242936] usbcore: registered new device driver usb |
| [ 1.245662] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.245675] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 |
| [ 1.246738] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.246751] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.246841] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.246952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.246957] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.246960] usb usb1: Product: xHCI Host Controller |
| [ 1.246963] usb usb1: Manufacturer: Linux 5.4.0-rc4-00001-g248e7f8ae551 xhci-hcd |
| [ 1.246966] usb usb1: SerialNumber: 0000:00:14.0 |
| [ 1.247096] hub 1-0:1.0: USB hub found |
| [ 1.247109] hub 1-0:1.0: 4 ports detected |
| [ 1.247301] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.247308] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.247313] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.247351] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 |
| [ 1.247355] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.247358] usb usb2: Product: xHCI Host Controller |
| [ 1.247360] usb usb2: Manufacturer: Linux 5.4.0-rc4-00001-g248e7f8ae551 xhci-hcd |
| [ 1.247363] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.247460] hub 2-0:1.0: USB hub found |
| [ 1.247471] hub 2-0:1.0: 4 ports detected |
| [ 1.248468] ehci-pci: EHCI PCI platform driver |
| [ 1.248616] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.248623] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 |
| [ 1.248636] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.248738] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.248741] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.248865] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.250759] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.250763] sdhci: Copyright(c) Pierre Ossman |
| [ 1.251760] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 1.252063] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.252548] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.252567] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe163f000 |
| [ 1.256538] SCSI subsystem initialized |
| [ 1.259371] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 1.261337] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.261340] ACPI: Thermal Zone [THM0] (57 C) |
| [ 1.263246] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 1.263376] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 1.264367] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.264369] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.267153] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.267202] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.267205] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.267207] usb usb3: Product: EHCI Host Controller |
| [ 1.267208] usb usb3: Manufacturer: Linux 5.4.0-rc4-00001-g248e7f8ae551 ehci_hcd |
| [ 1.267210] usb usb3: SerialNumber: 0000:00:1a.0 |
| [ 1.267311] hub 3-0:1.0: USB hub found |
| [ 1.267317] hub 3-0:1.0: 3 ports detected |
| [ 1.267506] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.267512] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 1.267523] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.271436] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.271452] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1640000 |
| [ 1.276321] libata version 3.00 loaded. |
| [ 1.278394] ahci 0000:00:1f.2: version 3.0 |
| [ 1.278602] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.278648] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.287145] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.287215] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.287220] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.287225] usb usb4: Product: EHCI Host Controller |
| [ 1.287228] usb usb4: Manufacturer: Linux 5.4.0-rc4-00001-g248e7f8ae551 ehci_hcd |
| [ 1.287231] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 1.287351] hub 4-0:1.0: USB hub found |
| [ 1.287362] hub 4-0:1.0: 3 ports detected |
| [ 1.288739] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| [ 1.288746] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.289400] scsi host0: ahci |
| [ 1.295185] scsi host1: ahci |
| [ 1.295299] scsi host2: ahci |
| [ 1.297725] scsi host3: ahci |
| [ 1.297854] scsi host4: ahci |
| [ 1.297953] scsi host5: ahci |
| [ 1.298004] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 31 |
| [ 1.298008] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 31 |
| [ 1.298012] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 31 |
| [ 1.298014] ata4: DUMMY |
| [ 1.298015] ata5: DUMMY |
| [ 1.298016] ata6: DUMMY |
| [ 1.358855] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.377350] random: fast init done |
| [ 1.455724] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:5f:1b:41 |
| [ 1.455730] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.455789] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.456481] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.603169] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.609717] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.610112] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.611039] ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR060, max UDMA/133 |
| [ 1.611049] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 1.613481] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.616371] ata1.00: configured for UDMA/133 |
| [ 1.623165] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.626884] scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R060 PQ: 0 ANSI: 5 |
| [ 1.759549] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.759559] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.759999] hub 3-1:1.0: USB hub found |
| [ 1.760174] hub 3-1:1.0: 6 ports detected |
| [ 1.779580] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.779591] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.780023] hub 4-1:1.0: USB hub found |
| [ 1.780175] hub 4-1:1.0: 8 ports detected |
| [ 1.935166] tsc: Refined TSC clocksource calibration: 2893.426 MHz |
| [ 1.935182] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b500ca33a, max_idle_ns: 440795203665 ns |
| [ 1.935225] clocksource: Switched to clocksource tsc |
| [ 1.941666] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 2.047165] usb 3-1.4: new full-speed USB device number 3 using ehci-pci |
| [ 2.053473] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 2.084344] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 2.144569] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 |
| [ 2.144591] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.159171] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.159181] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.159187] usb 3-1.4: Product: BCM20702A0 |
| [ 2.159192] usb 3-1.4: Manufacturer: Broadcom Corp |
| [ 2.159196] usb 3-1.4: SerialNumber: 7CE9D3E5DCBD |
| [ 2.182570] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| [ 2.243164] usb 3-1.5: new full-speed USB device number 4 using ehci-pci |
| [ 2.257625] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.262788] ata1.00: Enabling discard_zeroes_data |
| [ 2.262925] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB) |
| [ 2.262965] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.262975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.263014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.287522] ata1.00: Enabling discard_zeroes_data |
| [ 2.291670] sda: sda1 sda2 < sda5 > |
| [ 2.292608] ata1.00: Enabling discard_zeroes_data |
| [ 2.292869] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.351919] usb 3-1.5: New USB device found, idVendor=13d3, idProduct=3304, bcdDevice= 0.01 |
| [ 2.351925] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.407138] raid6: sse2x4 gen() 13527 MB/s |
| [ 2.431147] usb 3-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.475142] raid6: sse2x4 xor() 10496 MB/s |
| [ 2.543134] raid6: sse2x2 gen() 12336 MB/s |
| [ 2.547039] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18 |
| [ 2.547043] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.547045] usb 3-1.6: Product: Integrated Camera |
| [ 2.547047] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 2.611136] raid6: sse2x2 xor() 8791 MB/s |
| [ 2.679133] raid6: sse2x1 gen() 9871 MB/s |
| [ 2.747138] raid6: sse2x1 xor() 7860 MB/s |
| [ 2.747139] raid6: using algorithm sse2x4 gen() 13527 MB/s |
| [ 2.747141] raid6: .... xor() 10496 MB/s, rmw enabled |
| [ 2.747142] raid6: using ssse3x2 recovery algorithm |
| [ 2.747396] xor: automatically using best checksumming function avx |
| [ 2.747529] async_tx: api initialized (async) |
| [ 2.781406] Btrfs loaded, crc32c=crc32c-intel |
| [ 2.815183] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.818498] PM: Image not found (code -22) |
| [ 2.878150] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 2.922223] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 3.009372] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| [ 3.035966] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| [ 3.055487] systemd[1]: Detected architecture x86-64. |
| [ 3.057327] systemd[1]: Set hostname to <laptop>. |
| [ 3.154994] systemd[1]: Listening on LVM2 poll daemon socket. |
| [ 3.155253] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 3.156044] systemd[1]: Created slice System Slice. |
| [ 3.156162] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 3.156587] systemd[1]: Created slice User and Session Slice. |
| [ 3.156707] systemd[1]: Listening on Syslog Socket. |
| [ 3.156841] systemd[1]: Listening on udev Control Socket. |
| [ 3.171142] lp: driver loaded but no devices found |
| [ 3.176600] ppdev: user-space parallel port driver |
| [ 3.179249] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| [ 3.188494] RPC: Registered named UNIX socket transport module. |
| [ 3.188498] RPC: Registered udp transport module. |
| [ 3.188499] RPC: Registered tcp transport module. |
| [ 3.188500] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.208103] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 3.215758] Key type encrypted registered |
| [ 3.254157] systemd-journald[294]: Received request to flush runtime journal from PID 1 |
| [ 3.372777] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input4 |
| [ 3.372833] ACPI: Sleep Button [SLPB] |
| [ 3.372892] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input5 |
| [ 3.373246] ACPI: Lid Switch [LID] |
| [ 3.373315] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| [ 3.373357] ACPI: Power Button [PWRF] |
| [ 3.411692] ACPI: AC Adapter [AC] (on-line) |
| [ 3.440884] Non-volatile memory driver v1.3 |
| [ 3.452207] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 3.452216] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 3.452221] thinkpad_acpi: ThinkPad BIOS CBET4000 4.10-1082-g4357a82076-dirty, EC G2HT35WW-3.22 |
| [ 3.452227] thinkpad_acpi: Lenovo ThinkPad X230, model 232566G |
| [ 3.453105] mc: Linux media interface: v0.10 |
| [ 3.460202] thinkpad_acpi: radio switch found; radios are enabled |
| [ 3.460327] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 3.460422] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 3.460425] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 3.461663] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 3.465190] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 3.465283] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 3.467647] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 3.467652] battery: new extension: ThinkPad Battery Extension |
| [ 3.467714] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 |
| [ 3.536193] videodev: Linux video capture interface: v2.00 |
| [ 3.536894] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 3.551365] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190816/utaddress-213) |
| [ 3.551377] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 3.551383] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-213) |
| [ 3.551389] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 3.551393] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-213) |
| [ 3.551399] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 3.551402] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-213) |
| [ 3.551408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 3.551410] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 3.551412] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 3.577494] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea) |
| [ 3.579828] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 3.583974] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 3.583980] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 3.583984] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 3.583988] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 3.584066] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8 |
| [ 3.584108] usbcore: registered new interface driver uvcvideo |
| [ 3.584111] USB Video Class driver (1.1.1) |
| [ 3.599636] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 3.600558] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 3.600564] cfg80211: failed to load regulatory.db |
| [ 3.613238] input: PC Speaker as /devices/platform/pcspkr/input/input9 |
| [ 3.629921] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 3.629927] [drm] Driver supports precise vblank timestamp query. |
| [ 3.630207] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 3.643176] Adding 16731132k swap on /dev/sda5. Priority:-2 extents:1 across:16731132k SSFS |
| [ 3.668742] Bluetooth: Core ver 2.22 |
| [ 3.668767] NET: Registered protocol family 31 |
| [ 3.668769] Bluetooth: HCI device and connection manager initialized |
| [ 3.668774] Bluetooth: HCI socket layer initialized |
| [ 3.668778] Bluetooth: L2CAP socket layer initialized |
| [ 3.668782] Bluetooth: SCO socket layer initialized |
| [ 3.670803] Error: Driver 'pcspkr' is already registered, aborting... |
| [ 3.675331] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 3.675337] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 3.675340] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 3.675342] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 3.677397] usbcore: registered new interface driver btusb |
| [ 3.682071] usb 3-1.5: Direct firmware load for ath3k-1.fw failed with error -2 |
| [ 3.682079] Bluetooth: Firmware file "ath3k-1.fw" not found |
| [ 3.682085] ath3k: probe of 3-1.5:1.0 failed with error -2 |
| [ 3.682105] usbcore: registered new interface driver ath3k |
| [ 3.687783] ath: phy0: Set BT/WLAN RX diversity capability |
| [ 3.691730] cryptd: max_cpu_qlen set to 1000 |
| [ 3.695035] AVX version of gcm_enc/dec engaged. |
| [ 3.695041] AES CTR mode by8 optimization enabled |
| [ 3.739681] ath: phy0: ASPM enabled: 0x43 |
| [ 3.739686] ath: EEPROM regdomain: 0x60 |
| [ 3.739686] ath: EEPROM indicates we should expect a direct regpair map |
| [ 3.739687] ath: Country alpha2 being used: 00 |
| [ 3.739688] ath: Regpair used: 0x60 |
| [ 3.744716] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 3.744986] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffaeb8404a0000, irq=17 |
| [ 3.746329] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 |
| [ 3.746532] random: crng init done |
| [ 3.746535] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 3.747336] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 3.772062] acpi device:0d: registered as cooling_device5 |
| [ 3.772133] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 |
| [ 3.772443] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 3.788892] Bluetooth: hci0: BCM: chip id 63 |
| [ 3.789884] Bluetooth: hci0: BCM: features 0x07 |
| [ 3.797544] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 3.797551] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 3.797555] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 3.797559] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 3.797562] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 3.797565] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 3.797568] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 3.797573] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 3.805892] Bluetooth: hci0: BCM20702A |
| [ 3.806882] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 3.806898] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 3.806901] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 3.811575] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 3.811647] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 3.811709] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 3.811783] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 3.811847] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 3.811922] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 3.811988] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 3.812054] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 3.862096] iTCO_vendor_support: vendor-support=0 |
| [ 3.863906] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 3.863961] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 3.895256] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 3.982062] fbcon: i915drmfb (fb0) is primary device |
| [ 3.996939] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 |
| [ 4.021628] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 4.021629] Bluetooth: BNEP filters: protocol multicast |
| [ 4.021633] Bluetooth: BNEP socket layer initialized |
| [ 4.069758] usb 3-1.4: USB disconnect, device number 3 |
| [ 4.103544] intel_rapl_common: Found RAPL domain package |
| [ 4.103545] intel_rapl_common: Found RAPL domain core |
| [ 4.103545] intel_rapl_common: Found RAPL domain uncore |
| [ 4.827450] Console: switching to colour frame buffer device 170x48 |
| [ 4.849226] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 5.032528] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory |
| [ 5.033221] NFSD: Using legacy client tracking operations. |
| [ 5.033240] NFSD: starting 90-second grace period (net f00000a8) |
| [ 5.455160] mei_me 0000:00:16.0: wait hw ready failed |
| [ 5.455165] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 5.455183] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 5.780113] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 5.789560] tun: Universal TUN/TAP device driver, 1.6 |
| [ 5.863413] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 5.863420] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 5.863594] device virbr0-nic entered promiscuous mode |
| [ 5.871238] Bluetooth: hci0: command 0x0c52 tx timeout |
| [ 5.871281] Bluetooth: hci0: sending frame failed (-19) |
| [ 6.088157] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 6.088163] virbr0: port 1(virbr0-nic) entered listening state |
| [ 6.144175] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 6.486361] wlp2s0: authenticate with 24:a4:3c:04:2e:e9 |
| [ 6.500742] wlp2s0: send auth to 24:a4:3c:04:2e:e9 (try 1/3) |
| [ 6.511233] wlp2s0: authenticated |
| [ 6.511597] wlp2s0: associating with AP with corrupt beacon |
| [ 6.515285] wlp2s0: associate with 24:a4:3c:04:2e:e9 (try 1/3) |
| [ 6.521981] wlp2s0: RX AssocResp from 24:a4:3c:04:2e:e9 (capab=0x431 status=0 aid=1) |
| [ 6.522214] wlp2s0: associated |
| [ 7.471191] mei_me 0000:00:16.0: wait hw ready failed |
| [ 7.471203] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 7.471227] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 7.567295] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 7.887227] Bluetooth: hci0: command 0x0c45 tx timeout |
| [ 7.887301] Bluetooth: hci0: sending frame failed (-19) |
| [ 9.487244] mei_me 0000:00:16.0: wait hw ready failed |
| [ 9.487259] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 9.487273] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device |
| [ 9.487289] mei_me 0000:00:16.0: reset failed ret = -19 |
| [ 9.487291] mei_me 0000:00:16.0: link layer initialization failed. |
| [ 9.487294] mei_me 0000:00:16.0: init hw failure. |
| [ 9.487385] mei_me 0000:00:16.0: initialization failed. |
| [ 9.903158] Bluetooth: hci0: command 0x0c58 tx timeout |
| [ 9.903202] Bluetooth: hci0: sending frame failed (-19) |
| [ 10.517260] Bridge firewalling registered |
| [ 10.564473] Initializing XFRM netlink socket |
| [ 11.919161] Bluetooth: hci0: command 0x1004 tx timeout |
| [ 18.241937] fuse: init (API version 7.31) |
| [ 18.241966] *** VALIDATE fuse *** |
| [ 18.241971] *** VALIDATE fuse *** |
| [ 84.874112] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 84.874120] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 84.874466] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 84.874476] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 84.933702] wlp2s0: deauthenticating from 24:a4:3c:04:2e:e9 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 90.037357] PM: suspend entry (deep) |
| [ 90.045356] Filesystems sync: 0.007 seconds |
| [ 90.045559] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [ 90.047475] OOM killer disabled. |
| [ 90.047476] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 90.048587] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 90.233142] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 90.236593] sd 0:0:0:0: [sda] Stopping disk |
| [ 90.431600] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 90.517464] ACPI: EC: interrupt blocked |
| [ 90.557489] ACPI: Preparing to enter system sleep state S3 |
| [ 90.560584] ACPI: EC: event blocked |
| [ 90.560585] ACPI: EC: EC stopped |
| [ 90.560586] PM: Saving platform NVS memory |
| [ 90.560587] Disabling non-boot CPUs ... |
| [ 90.561140] IRQ 19: no longer affine to CPU1 |
| [ 90.561148] IRQ 27: no longer affine to CPU1 |
| [ 90.561153] IRQ 29: no longer affine to CPU1 |
| [ 90.561159] IRQ 31: no longer affine to CPU1 |
| [ 90.562184] smpboot: CPU 1 is now offline |
| [ 90.564148] IRQ 33: no longer affine to CPU2 |
| [ 90.565201] smpboot: CPU 2 is now offline |
| [ 90.566996] IRQ 1: no longer affine to CPU3 |
| [ 90.567001] IRQ 8: no longer affine to CPU3 |
| [ 90.567005] IRQ 9: no longer affine to CPU3 |
| [ 90.567008] IRQ 12: no longer affine to CPU3 |
| [ 90.567012] IRQ 16: no longer affine to CPU3 |
| [ 90.568036] smpboot: CPU 3 is now offline |
| [ 90.570026] ACPI: Low-level resume complete |
| [ 90.570063] ACPI: EC: EC started |
| [ 90.570064] PM: Restoring platform NVS memory |
| [ 90.570399] Enabling non-boot CPUs ... |
| [ 90.570787] x86: Booting SMP configuration: |
| [ 90.570788] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 90.573786] CPU1 is up |
| [ 90.574192] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 90.577032] CPU2 is up |
| [ 90.577446] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 90.580393] CPU3 is up |
| [ 90.582071] ACPI: Waking up from system sleep state S3 |
| [ 90.584820] ACPI: EC: interrupt unblocked |
| [ 90.630073] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 90.645542] ACPI: EC: event unblocked |
| [ 90.646865] ath: phy0: ASPM enabled: 0x43 |
| [ 90.648714] sd 0:0:0:0: [sda] Starting disk |
| [ 90.893901] usb 3-1.5: reset full-speed USB device number 4 using ehci-pci |
| [ 90.960384] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 90.960525] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 90.960555] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 90.963823] ata1.00: supports DRM functions and may not be fully accessible |
| [ 91.035322] ata1.00: supports DRM functions and may not be fully accessible |
| [ 91.081906] usb 3-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 91.090374] ata1.00: configured for UDMA/133 |
| [ 91.104236] ata1.00: Enabling discard_zeroes_data |
| [ 91.352922] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 91.384033] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 91.490411] OOM killer enabled. |
| [ 91.490415] Restarting tasks ... done. |
| [ 91.528363] video LNXVIDEO:00: Restoring backlight state |
| [ 91.566030] PM: suspend exit |
| [ 91.617948] usb 1-1: new high-speed USB device number 2 using xhci_hcd |
| [ 91.758360] e1000e: enp0s25 NIC Link is Down |
| [ 91.780786] usb 1-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.17 |
| [ 91.780792] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 91.780795] usb 1-1: Product: 4-Port USB 2.0 Hub |
| [ 91.780797] usb 1-1: Manufacturer: Generic |
| [ 91.781992] hub 1-1:1.0: USB hub found |
| [ 91.782878] hub 1-1:1.0: 4 ports detected |
| [ 91.898402] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 91.931147] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.17 |
| [ 91.931154] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 91.931157] usb 2-1: Product: 4-Port USB 3.0 Hub |
| [ 91.931160] usb 2-1: Manufacturer: Generic |
| [ 91.939205] hub 2-1:1.0: USB hub found |
| [ 91.940420] hub 2-1:1.0: 4 ports detected |
| [ 92.085946] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd |
| [ 92.201137] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.17 |
| [ 92.201144] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 92.201148] usb 1-1.1: Product: 4-Port USB 2.0 Hub |
| [ 92.201151] usb 1-1.1: Manufacturer: Generic |
| [ 92.203385] hub 1-1.1:1.0: USB hub found |
| [ 92.204359] hub 1-1.1:1.0: 4 ports detected |
| [ 92.274577] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd |
| [ 92.313654] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.17 |
| [ 92.313662] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 92.313666] usb 2-1.1: Product: 4-Port USB 3.0 Hub |
| [ 92.313669] usb 2-1.1: Manufacturer: Generic |
| [ 92.323348] hub 2-1.1:1.0: USB hub found |
| [ 92.325307] hub 2-1.1:1.0: 4 ports detected |
| [ 93.284736] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [ 93.299263] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [ 93.304302] wlp2s0: authenticated |
| [ 93.305830] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [ 93.312683] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x1431 status=0 aid=5) |
| [ 93.312898] wlp2s0: associated |
| [ 93.321109] ath: EEPROM regdomain: 0x8028 |
| [ 93.321111] ath: EEPROM indicates we should expect a country code |
| [ 93.321112] ath: doing EEPROM country->regdmn map search |
| [ 93.321113] ath: country maps to regdmn code: 0x37 |
| [ 93.321114] ath: Country alpha2 being used: AT |
| [ 93.321115] ath: Regpair used: 0x37 |
| [ 93.321116] ath: regdomain 0x8028 dynamically updated by country element |
| [ 93.340681] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 93.381898] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:34:c3:00 |
| [ 106.465515] usb 1-1.2: new high-speed USB device number 4 using xhci_hcd |
| [ 106.566205] usb 1-1.2: New USB device found, idVendor=152d, idProduct=2338, bcdDevice= 1.00 |
| [ 106.566210] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 |
| [ 106.566212] usb 1-1.2: Product: USB to ATA/ATAPI bridge |
| [ 106.566213] usb 1-1.2: Manufacturer: JMicron |
| [ 106.566214] usb 1-1.2: SerialNumber: 000000000000 |
| [ 106.579970] usb-storage 1-1.2:1.0: USB Mass Storage device detected |
| [ 106.580084] scsi host6: usb-storage 1-1.2:1.0 |
| [ 106.580240] usbcore: registered new interface driver usb-storage |
| [ 106.582991] usbcore: registered new interface driver uas |
| [ 107.597864] scsi 6:0:0:0: Direct-Access ST1000LM 035-1RK172 PQ: 0 ANSI: 5 |
| [ 107.598119] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [ 107.598286] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) |
| [ 107.598531] sd 6:0:0:0: [sdb] Write Protect is off |
| [ 107.598534] sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00 |
| [ 107.598784] sd 6:0:0:0: [sdb] No Caching mode page found |
| [ 107.598786] sd 6:0:0:0: [sdb] Assuming drive cache: write through |
| [ 107.720123] sd 6:0:0:0: [sdb] Attached SCSI disk |
| [ 110.978586] device-mapper: uevent: version 1.0.3 |
| [ 110.978708] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com |
| [ 112.916917] NET: Registered protocol family 38 |
| [ 113.558782] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) |
| [ 1026.576163] usb 1-1.2: USB disconnect, device number 4 |
| [ 2019.823946] usb 2-1: USB disconnect, device number 2 |
| [ 2019.823955] usb 2-1.1: USB disconnect, device number 3 |
| [ 2019.824298] usb 1-1: USB disconnect, device number 2 |
| [ 2019.824304] usb 1-1.1: USB disconnect, device number 3 |
| [ 2022.209314] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 2022.209323] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 2022.209633] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 2022.209640] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 2022.267087] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 2027.373582] PM: suspend entry (deep) |
| [ 2027.381695] Filesystems sync: 0.008 seconds |
| [ 2027.381933] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [ 2027.384103] OOM killer disabled. |
| [ 2027.384104] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 2027.385342] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 2027.584167] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 2027.587643] sd 0:0:0:0: [sda] Stopping disk |
| [ 2027.783194] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 2027.868748] ACPI: EC: interrupt blocked |
| [ 2027.908616] ACPI: Preparing to enter system sleep state S3 |
| [ 2027.911698] ACPI: EC: event blocked |
| [ 2027.911699] ACPI: EC: EC stopped |
| [ 2027.911700] PM: Saving platform NVS memory |
| [ 2027.911701] Disabling non-boot CPUs ... |
| [ 2027.912296] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [ 2027.912298] IRQ 17: no longer affine to CPU1 |
| [ 2027.912305] IRQ 19: no longer affine to CPU1 |
| [ 2027.912312] IRQ 27: no longer affine to CPU1 |
| [ 2027.912317] IRQ 29: no longer affine to CPU1 |
| [ 2027.913346] smpboot: CPU 1 is now offline |
| [ 2027.915416] IRQ 33: no longer affine to CPU2 |
| [ 2027.917038] smpboot: CPU 2 is now offline |
| [ 2027.918799] IRQ 1: no longer affine to CPU3 |
| [ 2027.918804] IRQ 8: no longer affine to CPU3 |
| [ 2027.918808] IRQ 9: no longer affine to CPU3 |
| [ 2027.918812] IRQ 12: no longer affine to CPU3 |
| [ 2027.918816] IRQ 16: no longer affine to CPU3 |
| [ 2027.919851] smpboot: CPU 3 is now offline |
| [ 2027.922268] ACPI: Low-level resume complete |
| [ 2027.922307] ACPI: EC: EC started |
| [ 2027.922307] PM: Restoring platform NVS memory |
| [ 2027.922665] Enabling non-boot CPUs ... |
| [ 2027.923067] x86: Booting SMP configuration: |
| [ 2027.923068] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 2027.926068] CPU1 is up |
| [ 2027.926492] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 2027.929324] CPU2 is up |
| [ 2027.929751] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 2027.932607] CPU3 is up |
| [ 2027.934432] ACPI: Waking up from system sleep state S3 |
| [ 2027.936865] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [ 2027.937030] ACPI: EC: interrupt unblocked |
| [ 2027.973844] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 2027.975621] ACPI: EC: event unblocked |
| [ 2027.977756] ath: phy0: ASPM enabled: 0x43 |
| [ 2027.978521] sd 0:0:0:0: [sda] Starting disk |
| [ 2028.221084] usb 3-1.5: reset full-speed USB device number 4 using ehci-pci |
| [ 2028.291577] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2028.291605] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 2028.291634] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2028.292972] ata1.00: supports DRM functions and may not be fully accessible |
| [ 2028.363136] ata1.00: supports DRM functions and may not be fully accessible |
| [ 2028.409147] usb 3-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 2028.419031] ata1.00: configured for UDMA/133 |
| [ 2028.432556] ata1.00: Enabling discard_zeroes_data |
| [ 2028.683238] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 2028.714939] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 2028.822646] OOM killer enabled. |
| [ 2028.822649] Restarting tasks ... done. |
| [ 2028.859321] video LNXVIDEO:00: Restoring backlight state |
| [ 2028.897357] PM: suspend exit |
| [ 2029.028004] e1000e: enp0s25 NIC Link is Down |
| [ 2030.555673] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [ 2030.570088] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [ 2030.585776] wlp2s0: authenticated |
| [ 2030.589152] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [ 2030.599705] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x1431 status=0 aid=6) |
| [ 2030.599944] wlp2s0: associated |
| [ 2030.609023] ath: EEPROM regdomain: 0x8028 |
| [ 2030.609026] ath: EEPROM indicates we should expect a country code |
| [ 2030.609027] ath: doing EEPROM country->regdmn map search |
| [ 2030.609028] ath: country maps to regdmn code: 0x37 |
| [ 2030.609029] ath: Country alpha2 being used: AT |
| [ 2030.609030] ath: Regpair used: 0x37 |
| [ 2030.609032] ath: regdomain 0x8028 dynamically updated by country element |
| [ 2030.626662] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 2030.668038] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:34:c3:00 |
| [ 2295.504293] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 2295.504301] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 2295.504678] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 2295.504685] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 2295.545440] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 2300.631233] PM: suspend entry (deep) |
| [ 2300.647447] Filesystems sync: 0.016 seconds |
| [ 2300.647639] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [ 2300.649973] OOM killer disabled. |
| [ 2300.649974] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. |
| [ 2300.650703] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 2300.874719] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 2300.878281] sd 0:0:0:0: [sda] Stopping disk |
| [ 2301.073187] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 2301.751583] ACPI: EC: interrupt blocked |
| [ 2301.791169] ACPI: Preparing to enter system sleep state S3 |
| [ 2301.794330] ACPI: EC: event blocked |
| [ 2301.794331] ACPI: EC: EC stopped |
| [ 2301.794332] PM: Saving platform NVS memory |
| [ 2301.794333] Disabling non-boot CPUs ... |
| [ 2301.794930] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [ 2301.794933] IRQ 17: no longer affine to CPU1 |
| [ 2301.794939] IRQ 19: no longer affine to CPU1 |
| [ 2301.794946] IRQ 27: no longer affine to CPU1 |
| [ 2301.794952] IRQ 29: no longer affine to CPU1 |
| [ 2301.796598] smpboot: CPU 1 is now offline |
| [ 2301.798445] IRQ 33: no longer affine to CPU2 |
| [ 2301.800116] smpboot: CPU 2 is now offline |
| [ 2301.801710] IRQ 1: no longer affine to CPU3 |
| [ 2301.801715] IRQ 8: no longer affine to CPU3 |
| [ 2301.801719] IRQ 9: no longer affine to CPU3 |
| [ 2301.801723] IRQ 12: no longer affine to CPU3 |
| [ 2301.801727] IRQ 16: no longer affine to CPU3 |
| [ 2301.802782] smpboot: CPU 3 is now offline |
| [ 2301.804895] ACPI: Low-level resume complete |
| [ 2301.804933] ACPI: EC: EC started |
| [ 2301.804933] PM: Restoring platform NVS memory |
| [ 2301.805255] Enabling non-boot CPUs ... |
| [ 2301.805655] x86: Booting SMP configuration: |
| [ 2301.805655] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 2301.808696] CPU1 is up |
| [ 2301.809100] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 2301.811966] CPU2 is up |
| [ 2301.812391] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 2301.815283] CPU3 is up |
| [ 2301.816345] ACPI: Waking up from system sleep state S3 |
| [ 2301.818885] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [ 2301.819026] ACPI: EC: interrupt unblocked |
| [ 2301.856496] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 2301.858018] ACPI: EC: event unblocked |
| [ 2301.859229] ath: phy0: ASPM enabled: 0x43 |
| [ 2301.859427] sd 0:0:0:0: [sda] Starting disk |
| [ 2302.103772] usb 3-1.5: reset full-speed USB device number 4 using ehci-pci |
| [ 2302.174250] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2302.174340] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2302.174367] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 2302.180737] ata1.00: supports DRM functions and may not be fully accessible |
| [ 2302.251055] ata1.00: supports DRM functions and may not be fully accessible |
| [ 2302.291778] usb 3-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 2302.307138] ata1.00: configured for UDMA/133 |
| [ 2302.321106] ata1.00: Enabling discard_zeroes_data |
| [ 2302.564817] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 2302.595985] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 2302.703045] OOM killer enabled. |
| [ 2302.703049] Restarting tasks ... done. |
| [ 2302.739668] video LNXVIDEO:00: Restoring backlight state |
| [ 2302.788160] PM: suspend exit |
| [ 2302.923366] e1000e: enp0s25 NIC Link is Down |
| [ 2304.451532] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [ 2304.466163] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [ 2304.470874] wlp2s0: authenticated |
| [ 2304.475745] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [ 2304.484029] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x1431 status=0 aid=5) |
| [ 2304.484239] wlp2s0: associated |
| [ 2304.490952] ath: EEPROM regdomain: 0x8028 |
| [ 2304.490953] ath: EEPROM indicates we should expect a country code |
| [ 2304.490954] ath: doing EEPROM country->regdmn map search |
| [ 2304.490954] ath: country maps to regdmn code: 0x37 |
| [ 2304.490955] ath: Country alpha2 being used: AT |
| [ 2304.490955] ath: Regpair used: 0x37 |
| [ 2304.490956] ath: regdomain 0x8028 dynamically updated by country element |
| [ 2304.512530] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 2304.563787] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:34:c3:00 |
| [ 2308.139696] usb 1-1: new high-speed USB device number 5 using xhci_hcd |
| [ 2308.307030] usb 1-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.17 |
| [ 2308.307130] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2308.307140] usb 1-1: Product: 4-Port USB 2.0 Hub |
| [ 2308.307147] usb 1-1: Manufacturer: Generic |
| [ 2308.308427] hub 1-1:1.0: USB hub found |
| [ 2308.309314] hub 1-1:1.0: 4 ports detected |
| [ 2308.595784] usb 1-1.1: new high-speed USB device number 6 using xhci_hcd |
| [ 2308.710675] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.17 |
| [ 2308.710683] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2308.710686] usb 1-1.1: Product: 4-Port USB 2.0 Hub |
| [ 2308.710689] usb 1-1.1: Manufacturer: Generic |
| [ 2308.712191] hub 1-1.1:1.0: USB hub found |
| [ 2308.713242] hub 1-1.1:1.0: 4 ports detected |
| [ 2311.016407] usb 2-1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd |
| [ 2311.050888] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.17 |
| [ 2311.050896] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2311.050899] usb 2-1: Product: 4-Port USB 3.0 Hub |
| [ 2311.050902] usb 2-1: Manufacturer: Generic |
| [ 2311.058043] hub 2-1:1.0: USB hub found |
| [ 2311.060357] hub 2-1:1.0: 4 ports detected |
| [ 2311.356385] usb 2-1.1: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd |
| [ 2311.391217] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.17 |
| [ 2311.391224] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2311.391228] usb 2-1.1: Product: 4-Port USB 3.0 Hub |
| [ 2311.391231] usb 2-1.1: Manufacturer: Generic |
| [ 2311.400503] hub 2-1.1:1.0: USB hub found |
| [ 2311.402482] hub 2-1.1:1.0: 4 ports detected |