blob: b0e9882454f22172d5cbdc7a5c6d3b8ed2f2dc8b [file] [log] [blame]
*** Pre-CBMEM romstage console overflowed, log truncated! ***
elected tRRD : 4T
Selected tRTP : 5T
Selected tWTR : 5T
Selected tRFC : 234T
Done dimm mapping
Update PCI-E configuration space:
PCI(0, 0, 0)[a0] = 0
PCI(0, 0, 0)[a4] = 2
PCI(0, 0, 0)[bc] = c2a00000
PCI(0, 0, 0)[a8] = 3d600000
PCI(0, 0, 0)[ac] = 2
PCI(0, 0, 0)[b8] = c0000000
PCI(0, 0, 0)[b0] = c0a00000
PCI(0, 0, 0)[b4] = c0800000
Done memory map
Done io registers
Done jedec reset
Done MRS commands
t123: 1912, 6000, 7620
ME: FW Partition Table : OK
ME: Bringup Loader Failure : NO
ME: Firmware Init Complete : NO
ME: Manufacturing Mode : YES
ME: Boot Options Present : NO
ME: Update In Progress : NO
ME: Current Working State : Initializing
ME: Current Operation State : Bring up
ME: Current Operation Mode : Debug or Disabled by AltDisableBit
ME: Error Code : No Error
ME: Progress Phase : BUP Phase
ME: Power Management Event : Clean Moff->Mx wake
ME: Progress Phase State : Check to see if straps say ME DISABLED
ME: Wrong mode : 2
ME: FWS2: 0x100a0140
ME: Bist in progress: 0x0
ME: ICC Status : 0x0
ME: Invoke MEBx : 0x0
ME: CPU replaced : 0x0
ME: MBP ready : 0x0
ME: MFS failure : 0x1
ME: Warm reset req : 0x0
ME: CPU repl valid : 0x1
ME: (Reserved) : 0x0
ME: FW update req : 0x0
ME: (Reserved) : 0x0
ME: Current state : 0xa
ME: Current PM event: 0x0
ME: Progress code : 0x1
PASSED! Tell ME that DRAM is ready
ME: ME is reporting as disabled, so not waiting for a response.
ME: FWS2: 0x100a0140
ME: Bist in progress: 0x0
ME: ICC Status : 0x0
ME: Invoke MEBx : 0x0
ME: CPU replaced : 0x0
ME: MBP ready : 0x0
ME: MFS failure : 0x1
ME: Warm reset req : 0x0
ME: CPU repl valid : 0x1
ME: (Reserved) : 0x0
ME: FW update req : 0x0
ME: (Reserved) : 0x0
ME: Current state : 0xa
ME: Current PM event: 0x0
ME: Progress code : 0x1
ME: Requested BIOS Action: No DID Ack received
ME: FW Partition Table : OK
ME: Bringup Loader Failure : NO
ME: Firmware Init Complete : NO
ME: Manufacturing Mode : YES
ME: Boot Options Present : NO
ME: Update In Progress : NO
ME: Current Working State : Initializing
ME: Current Operation State : Bring up
ME: Current Operation Mode : Debug or Disabled by AltDisableBit
ME: Error Code : No Error
ME: Progress Phase : BUP Phase
ME: Power Management Event : Clean Moff->Mx wake
ME: Progress Phase State : Check to see if straps say ME DISABLED
memcfg DDR3 ref clock 133 MHz
memcfg DDR3 clock 1330 MHz
memcfg channel assignment: A: 0, B 1, C 2
memcfg channel[0] config (00600010):
ECC inactive
enhanced interleave mode on
rank interleave on
DIMMA 4096 MB width x8 single rank, selected
DIMMB 0 MB width x8 single rank
memcfg channel[1] config (00600010):
ECC inactive
enhanced interleave mode on
rank interleave on
DIMMA 4096 MB width x8 single rank, selected
DIMMB 0 MB width x8 single rank
CBMEM:
IMD: root @ bffff000 254 entries.
IMD: root @ bfffec00 62 entries.
External stage cache:
IMD: root @ c03ff000 254 entries.
IMD: root @ c03fec00 62 entries.
CBMEM entry for DIMM info: 0xbfffea40
MTRR Range: Start=ff000000 End=0 (Size 1000000)
MTRR Range: Start=0 End=1000000 (Size 1000000)
MTRR Range: Start=bf800000 End=c0000000 (Size 800000)
MTRR Range: Start=c0000000 End=c0800000 (Size 800000)
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/postcar'
CBFS: Found @ offset 3c780 size 41dc
Decompressing stage fallback/postcar @ 0xbffcdfc0 (33424 bytes)
Loading module at bffce000 with entry bffce000. filesize: 0x3f90 memsize: 0x8250
Processing 124 relocs. Offset value of 0xbdfce000
coreboot-4.9-727-g358cbb3a30 Fri Feb 15 23:22:41 UTC 2019 postcar starting (log level: 7)...
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/ramstage'
CBFS: Found @ offset 19e40 size 1a874
Decompressing stage fallback/ramstage @ 0xbff80fc0 (310616 bytes)
Loading module at bff81000 with entry bff81000. filesize: 0x36c50 memsize: 0x4bd18
Processing 3692 relocs. Offset value of 0xbf181000
coreboot-4.9-727-g358cbb3a30 Fri Feb 15 23:22:41 UTC 2019 ramstage starting (log level: 7)...
Normal boot.
BS: BS_PRE_DEVICE times (us): entry 0 run 2 exit 0
BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 3 exit 0
Enumerating buses...
CPU_CLUSTER: 0 enabled
DOMAIN: 0000 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [8086/0154] enabled
PCI: 00:01.0 [8086/0151] disabled
PCI: 00:02.0 [8086/0166] enabled
PCI: 00:04.0 [8086/0153] enabled
PCI: 00:14.0 [8086/1e31] enabled
PCI: 00:16.0 [8086/1e3a] enabled
PCI: 00:16.1: Disabling device
PCI: 00:16.2: Disabling device
PCI: 00:16.3: Disabling device
PCI: 00:19.0: Disabling device
PCI: 00:1a.0 [8086/1e2d] enabled
PCI: 00:1b.0 [8086/1e20] enabled
PCH: PCIe Root Port coalescing is enabled
PCI: 00:1c.0 [8086/1e10] enabled
PCI: 00:1c.1 [8086/1e12] enabled
PCI: 00:1c.2: Disabling device
PCI: 00:1c.3: Disabling device
PCI: 00:1c.4: Disabling device
PCI: 00:1c.4: check set enabled
PCI: 00:1c.5: Disabling device
PCI: 00:1c.6: Disabling device
PCI: 00:1c.7: Disabling device
PCI: 00:1d.0 [8086/1e26] enabled
PCI: 00:1e.0: Disabling device
PCI: 00:1e.0 [8086/2448] disabled
PCI: 00:1f.0 [8086/1e56] enabled
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
PCI: 00:1f.2 [8086/1e01] enabled
PCI: 00:1f.3 [8086/1e22] enabled
PCI: 00:1f.5: Disabling device
PCI: 00:1f.6 [8086/1e24] enabled
PCI: Leftover static devices:
PCI: 00:16.1
PCI: 00:16.2
PCI: 00:16.3
PCI: 00:19.0
PCI: 00:1c.2
PCI: 00:1c.3
PCI: 00:1c.4
PCI: 00:1c.5
PCI: 00:1c.6
PCI: 00:1c.7
PCI: 00:1f.5
PCI: Check your devicetree.cb.
PCI: pci_scan_bus for bus 01
PCI: 01:00.0 [1180/e823] enabled
Enabling Common Clock Configuration
ASPM: Enabled L0s and L1
Failed to enable LTR for dev = PCI: 01:00.0
scan_bus: scanning of bus PCI: 00:1c.0 took 261 usecs
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [8086/0085] enabled
Enabling Common Clock Configuration
ASPM: Enabled L1
Failed to enable LTR for dev = PCI: 02:00.0
scan_bus: scanning of bus PCI: 00:1c.1 took 262 usecs
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
PMH7: ID 05 Revision 12
PNP: 00ff.1 enabled
PNP: 0c31.0 enabled
EC Firmware ID G6HT24WW-3.22, Version 6.01A
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
No CMOS option 'usb_always_on'.
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
H8: BDC not installed
H8: WWAN not installed
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
PNP: 00ff.2 enabled
scan_bus: scanning of bus PCI: 00:1f.0 took 4761 usecs
bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled
scan_bus: scanning of bus PCI: 00:1f.3 took 24 usecs
scan_bus: scanning of bus DOMAIN: 0000 took 5761 usecs
scan_bus: scanning of bus Root Device took 5768 usecs
done
FMAP: area RW_MRC_CACHE found @ b00000 (65536 bytes)
MRC: Checking cached data update for 'RW_MRC_CACHE'.
flash size 0xc00000 bytes
SF: Detected Opaque HW-sequencing with sector size 0x100, total 0xc00000
MRC: no data in 'RW_MRC_CACHE'
MRC: cache data 'RW_MRC_CACHE' needs update.
SF: Successfully written 2 bytes @ 0xb00000
SF: Successfully written 2 bytes @ 0xb00002
SF: Successfully written 1492 bytes @ 0xb00060
BS: BS_DEV_ENUMERATE times (us): entry 0 run 5804 exit 16665
found VGA at PCI: 00:02.0
Setting up VGA for PCI: 00:02.0
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Allocating resources...
Reading resources...
Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
PNP: 00ff.1 missing read_resources
PNP: 00ff.2 missing read_resources
Done reading resources.
skipping PNP: 00ff.2@60 fixed resource, size=0!
skipping PNP: 00ff.2@62 fixed resource, size=0!
skipping PNP: 00ff.2@64 fixed resource, size=0!
skipping PNP: 00ff.2@66 fixed resource, size=0!
Setting resources...
TOUUD 0x23d600000 TOLUD 0xc2a00000 TOM 0x200000000
MEBASE 0x7ffff00000
IGD decoded, subtracting 32M UMA and 2M GTT
TSEG base 0xc0000000 size 8M
Available memory below 4GB: 3072M
Available memory above 4GB: 5078M
PCI: 00:02.0 10 <- [0x00e0000000 - 0x00e03fffff] size 0x00400000 gran 0x16 mem64
PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64
PCI: 00:02.0 20 <- [0x0000001800 - 0x000000183f] size 0x00000040 gran 0x06 io
PCI: 00:04.0 10 <- [0x00e0610000 - 0x00e0617fff] size 0x00008000 gran 0x0f mem64
PCI: 00:14.0 10 <- [0x00e0600000 - 0x00e060ffff] size 0x00010000 gran 0x10 mem64
PCI: 00:16.0 10 <- [0x00e0621000 - 0x00e062100f] size 0x00000010 gran 0x04 mem64
PCI: 00:1a.0 10 <- [0x00e061e000 - 0x00e061e3ff] size 0x00000400 gran 0x0a mem
PCI: 00:1b.0 10 <- [0x00e0618000 - 0x00e061bfff] size 0x00004000 gran 0x0e mem64
PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io
PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem
PCI: 00:1c.0 20 <- [0x00e0400000 - 0x00e04fffff] size 0x00100000 gran 0x14 bus 01 mem
PCI: 01:00.0 10 <- [0x00e0400000 - 0x00e04000ff] size 0x00000100 gran 0x08 mem
PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io
PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem
PCI: 00:1c.1 20 <- [0x00e0500000 - 0x00e05fffff] size 0x00100000 gran 0x14 bus 02 mem
PCI: 02:00.0 10 <- [0x00e0500000 - 0x00e0501fff] size 0x00002000 gran 0x0d mem64
PCI: 00:1d.0 10 <- [0x00e061f000 - 0x00e061f3ff] size 0x00000400 gran 0x0a mem
PNP: 00ff.1 missing set_resources
PNP: 00ff.2 missing set_resources
PCI: 00:1f.2 10 <- [0x0000001860 - 0x0000001867] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 14 <- [0x0000001870 - 0x0000001873] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 18 <- [0x0000001868 - 0x000000186f] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 1c <- [0x0000001874 - 0x0000001877] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 20 <- [0x0000001840 - 0x000000185f] size 0x00000020 gran 0x05 io
PCI: 00:1f.2 24 <- [0x00e061d000 - 0x00e061d7ff] size 0x00000800 gran 0x0b mem
PCI: 00:1f.3 10 <- [0x00e0620000 - 0x00e06200ff] size 0x00000100 gran 0x08 mem64
PCI: 00:1f.6 10 <- [0x00e061c000 - 0x00e061cfff] size 0x00001000 gran 0x0c mem64
Done setting resources.
Done allocating resources.
BS: BS_DEV_RESOURCES times (us): entry 0 run 1577 exit 0
Enabling resources...
PCI: 00:00.0 subsystem <- 17aa/21fa
PCI: 00:00.0 cmd <- 06
PCI: 00:02.0 subsystem <- 17aa/21fa
PCI: 00:02.0 cmd <- 03
PCI: 00:04.0 cmd <- 02
PCI: 00:14.0 subsystem <- 17aa/21f9
PCI: 00:14.0 cmd <- 102
PCI: 00:16.0 subsystem <- 17aa/21f9
PCI: 00:16.0 cmd <- 02
PCI: 00:1a.0 subsystem <- 17aa/21f9
PCI: 00:1a.0 cmd <- 102
PCI: 00:1b.0 subsystem <- 17aa/21f9
PCI: 00:1b.0 cmd <- 102
PCI: 00:1c.0 bridge ctrl <- 0003
PCI: 00:1c.0 subsystem <- 17aa/21f9
PCI: 00:1c.0 cmd <- 106
PCI: 00:1c.1 bridge ctrl <- 0003
PCI: 00:1c.1 subsystem <- 17aa/21f9
PCI: 00:1c.1 cmd <- 106
PCI: 00:1d.0 subsystem <- 17aa/21f9
PCI: 00:1d.0 cmd <- 102
pch_decode_init
PCI: 00:1f.0 subsystem <- 17aa/21f9
PCI: 00:1f.0 cmd <- 107
PCI: 00:1f.2 subsystem <- 17aa/21f9
PCI: 00:1f.2 cmd <- 03
PCI: 00:1f.3 subsystem <- 17aa/21f9
PCI: 00:1f.3 cmd <- 103
PCI: 00:1f.6 subsystem <- 17aa/21f9
PCI: 00:1f.6 cmd <- 02
PCI: 01:00.0 subsystem <- 17aa/21f3
PCI: 01:00.0 cmd <- 06
PCI: 02:00.0 cmd <- 02
done.
BS: BS_DEV_ENABLE times (us): entry 0 run 184 exit 0
Found TPM ST33ZP24 by ST Microelectronics
TPM: Startup
TPM: command 0x99 returned 0x0
TPM: Asserting physical presence
TPM: command 0x4000000a returned 0x0
TPM: command 0x65 returned 0x0
TPM: flags disable=0, deactivated=0, nvlocked=1
TPM: setup succeeded
Initializing devices...
Root Device init ...
Root Device init finished in 1 usecs
CPU_CLUSTER: 0 init ...
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x00000000c0000000 size 0xbff40000 type 6
0x00000000c0000000 - 0x00000000d0000000 size 0x10000000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
0x0000000100000000 - 0x000000023d600000 size 0x13d600000 type 6
MTRR: Fixed MSR 0x250 0x0606060606060606
MTRR: Fixed MSR 0x258 0x0606060606060606
MTRR: Fixed MSR 0x259 0x0000000000000000
MTRR: Fixed MSR 0x268 0x0606060606060606
MTRR: Fixed MSR 0x269 0x0606060606060606
MTRR: Fixed MSR 0x26a 0x0606060606060606
MTRR: Fixed MSR 0x26b 0x0606060606060606
MTRR: Fixed MSR 0x26c 0x0606060606060606
MTRR: Fixed MSR 0x26d 0x0606060606060606
MTRR: Fixed MSR 0x26e 0x0606060606060606
MTRR: Fixed MSR 0x26f 0x0606060606060606
CPU physical address size: 36 bits
MTRR: default type WB/UC MTRR counts: 3/5.
MTRR: WB selected as default type.
MTRR: 0 base 0x00000000c0000000 mask 0x0000000ff0000000 type 0
MTRR: 1 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1
MTRR: 2 base 0x00000000e0000000 mask 0x0000000fe0000000 type 0
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU has 2 cores, 4 threads enabled.
Setting up SMI for CPU
Will perform SMM setup.
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'cpu_microcode_blob.bin'
CBFS: Found @ offset 139c0 size 6400
microcode: sig=0x306a9 pf=0x10 revision=0x20
CPU: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz.
Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170
Processing 16 relocs. Offset value of 0x00030000
Attempting to start 3 APs
Waiting for 10ms after sending INIT.
Waiting for 1st SIPI to complete...done.
Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1.
done.
AP: slot 2 apic_id 3.
AP: slot 3 apic_id 2.
Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0x00038000
SMM Module: stub loaded at 00038000. Will call bff9ffa3(00000000)
Installing SMM handler to 0xc0000000
Loading module at c0010000 with entry c001048b. filesize: 0x1ad0 memsize: 0x5af8
Processing 59 relocs. Offset value of 0xc0010000
Loading module at c0008000 with entry c0008000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0xc0008000
SMM Module: placing jmp sequence at c0007c00 rel16 0x03fd
SMM Module: placing jmp sequence at c0007800 rel16 0x07fd
SMM Module: placing jmp sequence at c0007400 rel16 0x0bfd
SMM Module: stub loaded at c0008000. Will call c001048b(00000000)
Initializing Southbridge SMI...
New SMBASE 0xc0000000
In relocation handler: cpu 0
New SMBASE=0xc0000000 IEDBASE=0xc0400000
Writing SMRR. base = 0xc0000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0xbffffc00
In relocation handler: cpu 1
New SMBASE=0xbffffc00 IEDBASE=0xc0400000
Writing SMRR. base = 0xc0000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0xbffff400
In relocation handler: cpu 3
New SMBASE=0xbffff400 IEDBASE=0xc0400000
Writing SMRR. base = 0xc0000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0xbffff800
In relocation handler: cpu 2
New SMBASE=0xbffff800 IEDBASE=0xc0400000
Writing SMRR. base = 0xc0000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
Initializing CPU #0
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
Enabling cache
CPU: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz.
CPU: platform id 4
CPU: cpuid(1) 0x306a9
CPU: AES supported
CPU: TXT supported
CPU: VT supported
Setting up local APIC... apic_id: 0x00 done.
VMX status: enabled
IA32_FEATURE_CONTROL status: locked
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 1800
Turbo is available but hidden
Turbo has been enabled
CPU #0 initialized
Initializing CPU #1
Initializing CPU #3
Initializing CPU #2
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
Enabling cache
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
Enabling cache
Enabling cache
CPU: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz.
CPU: platform id 4
CPU: cpuid(1) 0x306a9
CPU: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz.
CPU: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz.
CPU: AES supported
CPU: TXT supported
CPU: VT supported
CPU: platform id 4
Setting up local APIC...CPU: cpuid(1) 0x306a9
CPU: platform id 4
CPU: AES supported
CPU: TXT supported
CPU: VT supported
apic_id: 0x02 done.
Setting up local APIC...VMX status: enabled
CPU: cpuid(1) 0x306a9
IA32_FEATURE_CONTROL status: locked
apic_id: 0x03 done.
CPU: AES supported
CPU: TXT supported
CPU: VT supported
VMX status: enabled
Setting up local APIC...IA32_FEATURE_CONTROL status: locked
apic_id: 0x01 done.
VMX status: enabled
IA32_FEATURE_CONTROL status: locked
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 1800
CPU #3 initialized
model_x06ax: energy policy set to 6
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 1800
CPU #2 initialized
model_x06ax: frequency set to 1800
CPU #1 initialized
bsp_do_flight_plan done after 9 msecs.
Initializing southbridge SMI...
SMI_STS:
GPE0_STS: GPIO15 GPIO14 GPIO11 GPIO9 GPIO7 GPIO5 GPIO4 GPIO3 GPIO0
ALT_GP_SMI_STS: GPI14 GPI11 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI1 GPI0
TCO_STS:
Locking SMM.
CPU_CLUSTER: 0 init finished in 24145 usecs
PCI: 00:00.0 init ...
Disabling PEG12.
Disabling PEG11.
Disabling PEG10.
Disabling PEG60.
Disabling Device 7.
Disabling PEG IO clock.
Set BIOS_RESET_CPL
CPU TDP: 17 Watts
PCI: 00:00.0 init finished in 1017 usecs
PCI: 00:02.0 init ...
GT Power Management Init
IVB GT2 17W Power Meter Weights
GT Power Management Init (post VBIOS)
[0.178584] CONFIG =>
[0.178585] (Primary =>
[0.178585] (Port => Internal,
[0.178586] Framebuffer =>
[0.178586] (Width => 1600,
[0.178587] Height => 900,
[0.178587] Start_X => 0,
[0.178588] Start_Y => 0,
[0.178588] Stride => 1600,
[0.178589] V_Stride => 900,
[0.178589] Tiling => Linear ,
[0.178590] Rotation => No_Rotation,
[0.178591] Offset => 0x00000000,
[0.178592] BPC => 8),
[0.178592] Mode =>
[0.178593] (Dotclock => 108000000,
[0.178594] H_Visible => 1600,
[0.178595] H_Sync_Begin => 1648,
[0.178596] H_Sync_End => 1680,
[0.178597] H_Total => 1924,
[0.178598] V_Visible => 900,
[0.178599] V_Sync_Begin => 903,
[0.178600] V_Sync_End => 908,
[0.178601] V_Total => 936,
[0.178602] H_Sync_Active_High => False,
[0.178602] V_Sync_Active_High => False,
[0.178603] BPC => 5)),
[0.178604] Secondary =>
[0.178604] (Port => Disabled,
[0.178605] Framebuffer =>
[0.178605] (Width => 1,
[0.178606] Height => 1,
[0.178606] Start_X => 0,
[0.178607] Start_Y => 0,
[0.178607] Stride => 1,
[0.178608] V_Stride => 1,
[0.178608] Tiling => Linear ,
[0.178609] Rotation => No_Rotation,
[0.178609] Offset => 0x00000000,
[0.178610] BPC => 8),
[0.178610] Mode =>
[0.178611] (Dotclock => 19200000,
[0.178612] H_Visible => 1,
[0.178612] H_Sync_Begin => 1,
[0.178613] H_Sync_End => 1,
[0.178613] H_Total => 1,
[0.178614] V_Visible => 1,
[0.178614] V_Sync_Begin => 1,
[0.178615] V_Sync_End => 1,
[0.178615] V_Total => 1,
[0.178616] H_Sync_Active_High => False,
[0.178616] V_Sync_Active_High => False,
[0.178617] BPC => 5)),
[0.178617] Tertiary =>
[0.178618] (Port => Disabled,
[0.178618] Framebuffer =>
[0.178619] (Width => 1,
[0.178619] Height => 1,
[0.178620] Start_X => 0,
[0.178620] Start_Y => 0,
[0.178621] Stride => 1,
[0.178621] V_Stride => 1,
[0.178622] Tiling => Linear ,
[0.178622] Rotation => No_Rotation,
[0.178623] Offset => 0x00000000,
[0.178623] BPC => 8),
[0.178624] Mode =>
[0.178624] (Dotclock => 19200000,
[0.178625] H_Visible => 1,
[0.178625] H_Sync_Begin => 1,
[0.178626] H_Sync_End => 1,
[0.178626] H_Total => 1,
[0.178627] V_Visible => 1,
[0.178627] V_Sync_Begin => 1,
[0.178628] V_Sync_End => 1,
[0.178628] V_Total => 1,
[0.178629] H_Sync_Active_High => False,
[0.178629] V_Sync_Active_High => False,
[0.178630] BPC => 5)));
PCI: 00:02.0 init finished in 66996 usecs
PCI: 00:04.0 init ...
PCI: 00:04.0 init finished in 0 usecs
PCI: 00:14.0 init ...
XHCI: Setting up controller.. done.
PCI: 00:14.0 init finished in 7 usecs
PCI: 00:16.0 init ...
ME: FW Partition Table : OK
ME: Bringup Loader Failure : NO
ME: Firmware Init Complete : NO
ME: Manufacturing Mode : YES
ME: Boot Options Present : NO
ME: Update In Progress : NO
ME: Current Working State : Initializing
ME: Current Operation State : Bring up
ME: Current Operation Mode : Debug or Disabled by AltDisableBit
ME: Error Code : No Error
ME: Progress Phase : BUP Phase
ME: Power Management Event : Clean Moff->Mx wake
ME: Progress Phase State : Check to see if straps say ME DISABLED
intel_me_path: mbp is not ready!
ME: BIOS path: Error
PCI: 00:16.0 init finished in 19 usecs
PCI: 00:1a.0 init ...
EHCI: Setting up controller.. done.
PCI: 00:1a.0 init finished in 12 usecs
PCI: 00:1b.0 init ...
Azalia: base = e0618000
Azalia: codec_mask = 09
Azalia: Initializing codec #3
Azalia: codec viddid: 80862806
Azalia: verb_size: 16
Azalia: verb loaded.
Azalia: Initializing codec #0
Azalia: codec viddid: 10ec0269
Azalia: verb_size: 44
Azalia: verb loaded.
PCI: 00:1b.0 init finished in 4601 usecs
PCI: 00:1c.0 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.0 init finished in 11 usecs
PCI: 00:1c.1 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.1 init finished in 11 usecs
PCI: 00:1d.0 init ...
EHCI: Setting up controller.. done.
PCI: 00:1d.0 init finished in 12 usecs
PCI: 00:1f.0 init ...
pch: lpc_init
PCH: detected QS77, device id: 0x1e56, rev id 0x4
IOAPIC: Initializing IOAPIC at 0xfec00000
IOAPIC: Bootstrap Processor Local APIC = 0x00
IOAPIC: ID = 0x02
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
Set power off after power failure.
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
NMI sources enabled.
PantherPoint PM init
RTC: failed = 0x0
RTC Init
Disabling ACPI via APMC:
done.
pch_spi_init
PCI: 00:1f.0 init finished in 951 usecs
PCI: 00:1f.2 init ...
SATA: Initializing...
FMAP: area COREBOOT found @ b10200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
SATA: Controller in AHCI mode.
ABAR: e061d000
PCI: 00:1f.2 init finished in 354 usecs
PCI: 00:1f.3 init ...
PCI: 00:1f.3 init finished in 7 usecs
PCI: 00:1f.6 init ...
PCI: 00:1f.6 init finished in 0 usecs
PCI: 01:00.0 init ...
PCI: 01:00.0 init finished in 14 usecs
PCI: 02:00.0 init ...
PCI: 02:00.0 init finished in 1 usecs
PNP: 00ff.2 init ...
PNP: 00ff.2 init finished in 0 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ...
I2C: 01:54 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ...
I2C: 01:55 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ...
I2C: 01:56 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ...
I2C: 01:57 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ...
Locking EEPROM RFID
init EEPROM done
I2C: 01:5c init finished in 26982 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ...
I2C: 01:5d init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ...
I2C: 01:5e init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ...
I2C: 01:5f init finished in 1 usecs
Devices initialized
BS: BS_DEV_INIT times (us): entry 63864 run 125254 exit 0
Finalize devices...
PCI: 00:1f.0 final
Devices finalized
BS: BS_POST_DEVICE times (us): entry 0 run 67 exit 0
BS: BS_OS_RESUME_CHECK times (us): entry 0 run 2 exit 0
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/dsdt.aml'
CBFS: Found @ offset 409c0 size 35a1
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/slic'
CBFS: 'fallback/slic' not found.
ACPI: Writing ACPI tables at bff44000.
ACPI: * FACS
ACPI: * DSDT
ACPI: * FADT
ACPI: added table 1/32, length now 40
ACPI: * SSDT
Found 1 CPU(s) with 4 core(s) each.
PSS: 1801MHz power 17000 control 0x1c00 status 0x1c00
PSS: 1800MHz power 17000 control 0x1200 status 0x1200
PSS: 1600MHz power 14748 control 0x1000 status 0x1000
PSS: 1400MHz power 12601 control 0xe00 status 0xe00
PSS: 1200MHz power 10552 control 0xc00 status 0xc00
PSS: 1000MHz power 8595 control 0xa00 status 0xa00
PSS: 800MHz power 6710 control 0x800 status 0x800
PSS: 1801MHz power 17000 control 0x1c00 status 0x1c00
PSS: 1800MHz power 17000 control 0x1200 status 0x1200
PSS: 1600MHz power 14748 control 0x1000 status 0x1000
PSS: 1400MHz power 12601 control 0xe00 status 0xe00
PSS: 1200MHz power 10552 control 0xc00 status 0xc00
PSS: 1000MHz power 8595 control 0xa00 status 0xa00
PSS: 800MHz power 6710 control 0x800 status 0x800
PSS: 1801MHz power 17000 control 0x1c00 status 0x1c00
PSS: 1800MHz power 17000 control 0x1200 status 0x1200
PSS: 1600MHz power 14748 control 0x1000 status 0x1000
PSS: 1400MHz power 12601 control 0xe00 status 0xe00
PSS: 1200MHz power 10552 control 0xc00 status 0xc00
PSS: 1000MHz power 8595 control 0xa00 status 0xa00
PSS: 800MHz power 6710 control 0x800 status 0x800
PSS: 1801MHz power 17000 control 0x1c00 status 0x1c00
PSS: 1800MHz power 17000 control 0x1200 status 0x1200
PSS: 1600MHz power 14748 control 0x1000 status 0x1000
PSS: 1400MHz power 12601 control 0xe00 status 0xe00
PSS: 1200MHz power 10552 control 0xc00 status 0xc00
PSS: 1000MHz power 8595 control 0xa00 status 0xa00
PSS: 800MHz power 6710 control 0x800 status 0x800
Generating ACPI PIRQ entries
\_SB.PCI0.LPCB.TPM: LPC TPM PNP: 0c31.0
ACPI: * H8
H8: BDC not installed
H8: WWAN not installed
\_SB.PCI0.RP02.WIFI: PCI: 02:00.0
ACPI: added table 2/32, length now 44
ACPI: * MCFG
ACPI: added table 3/32, length now 48
ACPI: * TCPA
TCPA log created at bff33000
ACPI: added table 4/32, length now 52
ACPI: * MADT
ACPI: added table 5/32, length now 56
current = bff49420
ACPI: * DMAR
ACPI: added table 6/32, length now 60
current = bff494f0
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 3ba80 size 5a0
Found a VBT of 6144 bytes after decompression
GMA: Found VBT in CBFS
GMA: Found valid VBT in CBFS
ACPI: * HPET
ACPI: added table 7/32, length now 64
ACPI: done.
ACPI tables: 30000 bytes.
smbios_write_tables: bff32000
Create SMBIOS type 17
PCI: 02:00.0 (unknown)
SMBIOS tables: 652 bytes.
Writing table forward entry at 0x00000500
Wrote coreboot table at: 00000500, 0x10 bytes, checksum bfe7
Writing coreboot table at 0xbff68000
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3c080 size 694
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
1. 0000000000001000-000000000009ffff: RAM
2. 00000000000a0000-00000000000fffff: RESERVED
3. 0000000000100000-00000000bff31fff: RAM
4. 00000000bff32000-00000000bff80fff: CONFIGURATION TABLES
5. 00000000bff81000-00000000bffccfff: RAMSTAGE
6. 00000000bffcd000-00000000bfffffff: CONFIGURATION TABLES
7. 00000000c0000000-00000000c29fffff: RESERVED
8. 00000000f0000000-00000000f3ffffff: RESERVED
9. 00000000fed40000-00000000fed44fff: RESERVED
10. 00000000fed90000-00000000fed91fff: RESERVED
11. 0000000100000000-000000023d5fffff: RAM
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
Wrote coreboot table at: bff68000, 0xa30 bytes, checksum 59c5
coreboot table: 2632 bytes.
IMD ROOT 0. bffff000 00001000
IMD SMALL 1. bfffe000 00001000
CONSOLE 2. bffde000 00020000
TIME STAMP 3. bffdd000 00000910
MRC DATA 4. bffdc000 000005d4
ROMSTG STCK 5. bffd7000 00005000
AFTER CAR 6. bffcd000 0000a000
RAMSTAGE 7. bff80000 0004d000
SMM BACKUP 8. bff70000 00010000
COREBOOT 9. bff68000 00008000
ACPI 10. bff44000 00024000
ACPI GNVS 11. bff43000 00001000
TCPA TCGLOG12. bff33000 00010000
SMBIOS 13. bff32000 00000800
IMD small region:
IMD ROOT 0. bfffec00 00000400
MEM INFO 1. bfffea40 000001a9
ROMSTAGE 2. bfffea20 00000004
COREBOOTFWD 3. bfffe9e0 00000028
BS: BS_WRITE_TABLES times (us): entry 0 run 28484 exit 0
CBFS: 'Master Header Locator' located CBFS at [b10200:c00000)
CBFS: Locating 'fallback/payload'
CBFS: Found @ offset 60a40 size 106f9
Checking segment from ROM address 0xfff70c78
Payload being loaded at below 1MiB without region being marked as RAM usable.
Checking segment from ROM address 0xfff70c94
Loading segment from ROM address 0xfff70c78
code (compression=1)
New segment dstaddr 0x000e0d20 memsize 0x1f2e0 srcaddr 0xfff70cb0 filesize 0x106c1
Loading Segment: addr: 0x000e0d20 memsz: 0x000000000001f2e0 filesz: 0x00000000000106c1
using LZMA
Loading segment from ROM address 0xfff70c94
Entry Point 0x000fd274
BS: BS_PAYLOAD_LOAD times (us): entry 0 run 36585 exit 0
PCH: watchdog disabled
Jumping to boot code at 000fd274(bff68000)
SeaBIOS (version rel-1.12.0-0-ga698c89)
BUILD: gcc: (coreboot toolchain v3f7fd58823 2019-01-16) 8.2.0 binutils: (GNU Binutils) 2.32
Found coreboot cbmem console @ bffde000
Found mainboard LENOVO ThinkPad X1 carbon gen 1
Relocating init from 0x000e2380 to 0xbfee5580 (size 51680)
Found CBFS header at 0xfff10238
multiboot: eax=bffb72c0, ebx=bffb7274
Found 16 PCI devices (max PCI bus is 02)
Copying SMBIOS entry point from 0xbff32000 to 0x000f67a0
Copying ACPI RSDP from 0xbff44000 to 0x000f6770
Using pmtimer, ioport 0x508
Scan for VGA option rom
Running option rom at c000:0003
pmm call arg1=0
Turning on vga text mode console
SeaBIOS (version rel-1.12.0-0-ga698c89)
Machine UUID 49c7ee01-52c7-11cb-bc99-f35b5ad13e1d
XHCI init on dev 00:14.0: regs @ 0xe0600000, 8 ports, 32 slots, 32 byte contexts
XHCI protocol USB 2.00, 4 ports (offset 1), def 3001
XHCI protocol USB 3.00, 4 ports (offset 5), def 1000
XHCI extcap 0xc1 @ 0xe0608040
XHCI extcap 0xc0 @ 0xe0608070
XHCI extcap 0x1 @ 0xe0608330
EHCI init on dev 00:1a.0 (regs=0xe061e020)
EHCI init on dev 00:1d.0 (regs=0xe061f020)
AHCI controller at 00:1f.2, iobase 0xe061d000, irq 10
Searching bootorder for: /pci@i0cf8/pci-bridge@1c/*@0
Found 0 lpt ports
Found 0 serial ports
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/tint
Searching bootorder for: /rom@img/nvramcui
Searching bootorder for: /rom@img/coreinfo
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
AHCI/0: Set transfer mode to UDMA-6
AHCI/0: registering: "AHCI/0: TS240GMTS420S ATA-9 Hard-Disk (223 GiBytes)"
XHCI no devices found
Initialized USB HUB (0 ports used)
Initialized USB HUB (0 ports used)
WARNING - Timeout at ps2_recvbyte:182!
Discarding ps2 data aa (status=11)
Discarding ps2 data e0 (status=11)
Discarding ps2 data 0f (status=11)
Discarding ps2 data e0 (status=11)
Discarding ps2 data f0 (status=11)
Discarding ps2 data 0f (status=11)
Discarding ps2 data 0d (status=11)
Discarding ps2 data f0 (status=11)
Discarding ps2 data 0d (status=11)
WARNING - Timeout at ps2_recvbyte:182!
PS2 keyboard initialized
All threads complete.
Scan for option roms
Press ESC for boot menu.
Searching bootorder for: HALT
drive 0x000f6700: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=468862128
Space available for UMB: c7000-ed800, f5fc0-f6700
Returned 188416 bytes of ZoneHigh
e820 map has 9 items:
0: 0000000000000000 - 000000000009fc00 = 1 RAM
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 00000000bff20000 = 1 RAM
4: 00000000bff20000 - 00000000c2a00000 = 2 RESERVED
5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
6: 00000000fed40000 - 00000000fed45000 = 2 RESERVED
7: 00000000fed90000 - 00000000fed92000 = 2 RESERVED
8: 0000000100000000 - 000000023d600000 = 1 RAM
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00