| [ 0.000000] Linux version 5.0.0-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-3)) #1 SMP Debian 5.0.2-1~exp1 (2019-03-18) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.0.0-trunk-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff20fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff21000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.9-1640-g57459dbeac 05/14/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.263 MHz processor |
| [ 0.002003] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002005] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002008] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.002012] MTRR default type: write-back |
| [ 0.002013] MTRR fixed ranges enabled: |
| [ 0.002014] 00000-9FFFF write-back |
| [ 0.002014] A0000-BFFFF uncachable |
| [ 0.002015] C0000-FFFFF write-back |
| [ 0.002015] MTRR variable ranges enabled: |
| [ 0.002017] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.002017] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002018] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002019] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002019] 4 disabled |
| [ 0.002020] 5 disabled |
| [ 0.002020] 6 disabled |
| [ 0.002020] 7 disabled |
| [ 0.002021] 8 disabled |
| [ 0.002021] 9 disabled |
| [ 0.002769] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.003128] last_pfn = 0x7ff21 max_arch_pfn = 0x400000000 |
| [ 0.012557] Base memory trampoline at [(____ptrval____)] 99000 size 24576 |
| [ 0.012562] BRK [0x2c8201000, 0x2c8201fff] PGTABLE |
| [ 0.012564] BRK [0x2c8202000, 0x2c8202fff] PGTABLE |
| [ 0.012565] BRK [0x2c8203000, 0x2c8203fff] PGTABLE |
| [ 0.012595] BRK [0x2c8204000, 0x2c8204fff] PGTABLE |
| [ 0.012597] BRK [0x2c8205000, 0x2c8205fff] PGTABLE |
| [ 0.012694] BRK [0x2c8206000, 0x2c8206fff] PGTABLE |
| [ 0.012719] BRK [0x2c8207000, 0x2c8207fff] PGTABLE |
| [ 0.012891] RAMDISK: [mem 0x312f5000-0x34971fff] |
| [ 0.012897] ACPI: Early table checksum verification disabled |
| [ 0.012955] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.012958] ACPI: XSDT 0x000000007FF470E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012963] ACPI: FACP 0x000000007FF4AB20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012967] ACPI: DSDT 0x000000007FF47280 00389F (v02 COREv4 COREBOOT 20110725 INTL 20190108) |
| [ 0.012970] ACPI: FACS 0x000000007FF47240 000040 |
| [ 0.012972] ACPI: FACS 0x000000007FF47240 000040 |
| [ 0.012974] ACPI: SSDT 0x000000007FF4AC20 001A32 (v02 COREv4 COREBOOT 0000002A CORE 20190108) |
| [ 0.012977] ACPI: MCFG 0x000000007FF4C660 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012979] ACPI: TCPA 0x000000007FF4C6A0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012982] ACPI: APIC 0x000000007FF4C6E0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012984] ACPI: DMAR 0x000000007FF4C750 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012987] ACPI: HPET 0x000000007FF4E820 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012993] ACPI: Local APIC address 0xfee00000 |
| [ 0.013066] No NUMA configuration found |
| [ 0.013067] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.013070] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| [ 0.013098] Zone ranges: |
| [ 0.013099] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.013100] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.013101] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.013102] Device empty |
| [ 0.013103] Movable zone start for each node |
| [ 0.013104] Early memory node ranges |
| [ 0.013105] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.013106] node 0: [mem 0x0000000000100000-0x000000007ff20fff] |
| [ 0.013107] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.013117] Zeroed struct page in unavailable ranges: 321 pages |
| [ 0.013118] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.013120] On node 0 totalpages: 4175039 |
| [ 0.013121] DMA zone: 64 pages used for memmap |
| [ 0.013121] DMA zone: 21 pages reserved |
| [ 0.013122] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.013217] DMA32 zone: 8125 pages used for memmap |
| [ 0.013218] DMA32 zone: 519969 pages, LIFO batch:63 |
| [ 0.026605] Normal zone: 57048 pages used for memmap |
| [ 0.026606] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.109298] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.109536] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.109538] ACPI: Local APIC address 0xfee00000 |
| [ 0.109553] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.109556] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.109557] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.109559] ACPI: IRQ0 used by override. |
| [ 0.109560] ACPI: IRQ9 used by override. |
| [ 0.109562] Using ACPI (MADT) for SMP configuration information |
| [ 0.109563] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.109567] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.109577] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.109578] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.109579] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.109580] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.109581] PM: Registered nosave memory: [mem 0x7ff21000-0x829fffff] |
| [ 0.109582] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.109582] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.109583] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.109584] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.109584] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.109585] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.109586] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.109588] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.109589] Booting paravirtualized kernel on bare hardware |
| [ 0.109591] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.205474] random: get_random_bytes called from start_kernel+0x93/0x501 with crng_init=0 |
| [ 0.205480] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.205641] percpu: Embedded 44 pages/cpu @(____ptrval____) s142936 r8192 d29096 u524288 |
| [ 0.205647] pcpu-alloc: s142936 r8192 d29096 u524288 alloc=1*2097152 |
| [ 0.205647] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.205663] Built 1 zonelists, mobility grouping on. Total pages: 4109781 |
| [ 0.205664] Policy zone: Normal |
| [ 0.205665] Kernel command line: BOOT_IMAGE=/vmlinuz-5.0.0-trunk-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.208747] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.208752] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.247295] Memory: 16290620K/16700156K available (10243K kernel code, 1167K rwdata, 3244K rodata, 1580K init, 2352K bss, 409536K reserved, 0K cma-reserved) |
| [ 0.247398] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.247403] Kernel/User page tables isolation: enabled |
| [ 0.247416] ftrace: allocating 31966 entries in 125 pages |
| [ 0.258616] rcu: Hierarchical RCU implementation. |
| [ 0.258618] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.258619] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.258620] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.261369] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.263122] Console: colour VGA+ 80x25 |
| [ 0.268445] printk: console [tty0] enabled |
| [ 0.268512] ACPI: Core revision 20181213 |
| [ 0.268702] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.268784] hpet clockevent registered |
| [ 0.268788] APIC: Switch to symmetric I/O mode setup |
| [ 0.268845] DMAR: Host address width 36 |
| [ 0.268899] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.268960] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.269028] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.269087] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.269145] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.269216] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.269276] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.269333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.269791] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.269848] x2apic enabled |
| [ 0.269907] Switched APIC routing to cluster x2apic. |
| [ 0.270393] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.288789] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b46710bcd, max_idle_ns: 440795352942 ns |
| [ 0.288873] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.52 BogoMIPS (lpj=11573052) |
| [ 0.288947] pid_max: default: 32768 minimum: 301 |
| [ 0.289024] LSM: Security Framework initializing |
| [ 0.289080] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.289150] AppArmor: AppArmor initialized |
| [ 0.291337] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.292490] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.292605] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.292696] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.293031] mce: CPU supports 7 MCE banks |
| [ 0.293096] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.293160] process: using mwait in idle threads |
| [ 0.293217] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.293274] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.293333] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.293390] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.293460] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.293526] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.293596] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.293656] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.293872] Freeing SMP alternatives memory: 24K |
| [ 0.295443] TSC deadline timer enabled |
| [ 0.295446] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.295596] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.295688] ... version: 3 |
| [ 0.295743] ... bit width: 48 |
| [ 0.295799] ... generic registers: 4 |
| [ 0.295853] ... value mask: 0000ffffffffffff |
| [ 0.295910] ... max period: 00007fffffffffff |
| [ 0.295963] ... fixed-purpose events: 3 |
| [ 0.296018] ... event mask: 000000070000000f |
| [ 0.296104] rcu: Hierarchical SRCU implementation. |
| [ 0.296464] random: crng done (trusting CPU's manufacturer) |
| [ 0.296704] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.296800] smp: Bringing up secondary CPUs ... |
| [ 0.296862] x86: Booting SMP configuration: |
| [ 0.296862] .... node #0, CPUs: #1 #2 #3 |
| [ 0.300908] smp: Brought up 1 node, 4 CPUs |
| [ 0.300979] smpboot: Max logical packages: 1 |
| [ 0.301035] smpboot: Total of 4 processors activated (23146.10 BogoMIPS) |
| [ 0.304141] devtmpfs: initialized |
| [ 0.304141] x86/mm: Memory block size: 128MB |
| [ 0.305730] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.305730] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.305730] pinctrl core: initialized pinctrl subsystem |
| [ 0.305730] NET: Registered protocol family 16 |
| [ 0.305730] audit: initializing netlink subsys (disabled) |
| [ 0.305730] audit: type=2000 audit(1557873436.036:1): state=initialized audit_enabled=0 res=1 |
| [ 0.305730] cpuidle: using governor ladder |
| [ 0.305730] cpuidle: using governor menu |
| [ 0.305730] ACPI: bus type PCI registered |
| [ 0.305730] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.305730] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.305730] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.305730] PCI: Using configuration type 1 for base access |
| [ 0.305730] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.308926] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.308939] ACPI: Added _OSI(Module Device) |
| [ 0.308978] ACPI: Added _OSI(Processor Device) |
| [ 0.309035] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.309092] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.309149] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.309206] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.309263] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.311271] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.312125] ACPI: EC: EC started |
| [ 0.312180] ACPI: EC: interrupt blocked |
| [ 0.312507] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.312868] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.312935] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.313003] ACPI: Interpreter enabled |
| [ 0.313070] ACPI: (supports S0 S3 S4 S5) |
| [ 0.313126] ACPI: Using IOAPIC for interrupt routing |
| [ 0.313196] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.313373] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.316393] ACPI: Power Resource [FPWR] (off) |
| [ 0.316685] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.316747] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.316849] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.316872] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.316983] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.317060] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| [ 0.317265] PCI host bridge to bus 0000:00 |
| [ 0.317321] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.317380] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.317439] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.317508] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.317577] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.317647] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.317717] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.317786] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.317854] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.317924] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.317992] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.318062] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.318131] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.318200] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.318270] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| [ 0.318340] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.318411] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.318473] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.318547] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.318556] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit] |
| [ 0.318561] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.318564] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.318624] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.318632] pci 0000:00:04.0: reg 0x10: [mem 0xe1b30000-0xe1b37fff 64bit] |
| [ 0.318714] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.318737] pci 0000:00:14.0: reg 0x10: [mem 0xe1b20000-0xe1b2ffff 64bit] |
| [ 0.318803] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.318867] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.318886] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff] |
| [ 0.318894] pci 0000:00:19.0: reg 0x14: [mem 0xe1b3c000-0xe1b3cfff] |
| [ 0.318901] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.318958] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.319016] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.319037] pci 0000:00:1a.0: reg 0x10: [mem 0xe1b3f000-0xe1b3f3ff] |
| [ 0.319117] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.319183] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.319205] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b38000-0xe1b3bfff 64bit] |
| [ 0.319275] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.319342] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.319480] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.319568] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.319729] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.319819] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.319840] pci 0000:00:1d.0: reg 0x10: [mem 0xe1b40000-0xe1b403ff] |
| [ 0.319920] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.319986] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.320141] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.320160] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.320167] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.320174] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.320182] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.320190] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.320197] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b3e000-0xe1b3e7ff] |
| [ 0.320239] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.320298] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.320316] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b41000-0xe1b410ff 64bit] |
| [ 0.320336] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.320404] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.320427] pci 0000:00:1f.6: reg 0x10: [mem 0xe1b3d000-0xe1b3dfff 64bit] |
| [ 0.320644] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| [ 0.320706] pci 0000:01:00.0: reg 0x10: [mem 0xe1a00000-0xe1a07fff 64bit] |
| [ 0.320734] pci 0000:01:00.0: reg 0x18: [mem 0xe1800000-0xe19fffff 64bit] |
| [ 0.320936] pci 0000:01:00.0: supports D1 D2 |
| [ 0.320937] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.321165] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.321230] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff] |
| [ 0.321520] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 |
| [ 0.321559] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.321865] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| [ 0.322178] pci 0000:02:00.0: supports D1 D2 |
| [ 0.322179] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.322407] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.322468] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.322472] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.322480] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.322610] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.322705] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.322799] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.322892] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.322984] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323073] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323165] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323257] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323846] ACPI: EC: interrupt unblocked |
| [ 0.323916] ACPI: EC: event unblocked |
| [ 0.323989] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.324058] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.324171] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.324171] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.324171] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.324171] vgaarb: loaded |
| [ 0.324171] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.324171] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.324171] PTP clock support registered |
| [ 0.324171] EDAC MC: Ver: 3.0.0 |
| [ 0.324889] PCI: Using ACPI for IRQ routing |
| [ 0.326422] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.326935] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.326936] e820: reserve RAM buffer [mem 0x7ff21000-0x7fffffff] |
| [ 0.326936] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.327011] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.327011] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.328882] clocksource: Switched to clocksource tsc-early |
| [ 0.336962] VFS: Disk quotas dquot_6.6.0 |
| [ 0.337032] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.337176] AppArmor: AppArmor Filesystem Enabled |
| [ 0.337244] pnp: PnP ACPI init |
| [ 0.337423] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.337483] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.337542] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.337600] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.337655] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.337715] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.337773] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.337831] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.337891] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.337951] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.338014] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.338396] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.338457] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.338488] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.338546] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.338606] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.338621] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.338642] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.338662] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.338679] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.338694] pnp: PnP ACPI: found 7 devices |
| [ 0.344224] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.344324] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.344387] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff] |
| [ 0.344458] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.344516] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.344579] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.344643] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.344719] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.344720] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.344721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.344722] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.344723] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.344724] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.344725] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| [ 0.344726] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| [ 0.344727] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| [ 0.344728] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| [ 0.344729] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| [ 0.344729] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| [ 0.344730] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| [ 0.344732] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| [ 0.344732] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| [ 0.344733] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| [ 0.344734] pci_bus 0000:01: resource 1 [mem 0xe1800000-0xe1afffff] |
| [ 0.344735] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.344736] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.344737] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.344801] NET: Registered protocol family 2 |
| [ 0.344991] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.345101] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.345340] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.345502] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.345589] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.345682] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.345798] NET: Registered protocol family 1 |
| [ 0.345858] NET: Registered protocol family 44 |
| [ 0.345921] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.346561] PCI: CLS 64 bytes, default 64 |
| [ 0.346591] Unpacking initramfs... |
| [ 1.059136] Freeing initrd memory: 55796K |
| [ 1.080893] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 1.080968] software IO TLB: mapped [mem 0x7bf21000-0x7ff21000] (64MB) |
| [ 1.081566] Initialise system trusted keyrings |
| [ 1.081664] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 1.082732] zbud: loaded |
| [ 1.249554] Key type asymmetric registered |
| [ 1.249614] Asymmetric key parser 'x509' registered |
| [ 1.249684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 1.249783] io scheduler mq-deadline registered |
| [ 1.250129] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 1.250374] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 1.250456] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.250644] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.250716] intel_idle: MWAIT substates: 0x21120 |
| [ 1.250717] intel_idle: v0.4.1 model 0x3A |
| [ 1.250887] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.251321] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.251753] Linux agpgart interface v0.103 |
| [ 1.251849] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.251910] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.252210] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.253911] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.253972] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.254159] mousedev: PS/2 mouse device common for all mice |
| [ 1.254250] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.254473] rtc_cmos 00:03: registered as rtc0 |
| [ 1.254540] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.254629] intel_pstate: Intel P-state driver initializing |
| [ 1.254875] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.255528] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.255795] NET: Registered protocol family 10 |
| [ 1.271646] Segment Routing with IPv6 |
| [ 1.271729] mip6: Mobile IPv6 |
| [ 1.271788] NET: Registered protocol family 17 |
| [ 1.271893] mpls_gso: MPLS GSO support |
| [ 1.272173] microcode: sig=0x306a9, pf=0x10, revision=0x20 |
| [ 1.272362] microcode: Microcode Update Driver: v2.2. |
| [ 1.272389] sched_clock: Marking stable (1265038441, 7316687)->(1277752723, -5397595) |
| [ 1.274645] registered taskstats version 1 |
| [ 1.274711] Loading compiled-in X.509 certificates |
| [ 1.310648] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.310730] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.310805] zswap: loaded using pool lzo/zbud |
| [ 1.310925] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.311231] rtc_cmos 00:03: setting system clock to 2019-05-14T22:37:17 UTC (1557873437) |
| [ 1.311894] Freeing unused kernel image memory: 1580K |
| [ 1.336971] Write protecting the kernel read-only data: 16384k |
| [ 1.338058] Freeing unused kernel image memory: 2036K |
| [ 1.338584] Freeing unused kernel image memory: 852K |
| [ 1.352618] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.352690] x86/mm: Checking user space page tables |
| [ 1.358016] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.358074] Run /init as init process |
| [ 1.464328] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input2 |
| [ 1.464837] ACPI: Sleep Button [SLPB] |
| [ 1.465144] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input3 |
| [ 1.465263] ACPI: Lid Switch [LID] |
| [ 1.465777] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 1.466569] ACPI: Power Button [PWRF] |
| [ 1.479900] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.479963] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.480173] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.482454] ACPI: bus type USB registered |
| [ 1.482537] usbcore: registered new interface driver usbfs |
| [ 1.482605] usbcore: registered new interface driver hub |
| [ 1.482690] usbcore: registered new device driver usb |
| [ 1.491447] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.491515] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 |
| [ 1.492639] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.492716] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.494908] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.494982] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.495053] usb usb1: Product: xHCI Host Controller |
| [ 1.495111] usb usb1: Manufacturer: Linux 5.0.0-trunk-amd64 xhci-hcd |
| [ 1.495171] usb usb1: SerialNumber: 0000:00:14.0 |
| [ 1.495293] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.495337] hub 1-0:1.0: USB hub found |
| [ 1.495420] hub 1-0:1.0: 4 ports detected |
| [ 1.495632] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.495659] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.495693] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.495749] sdhci: Copyright(c) Pierre Ossman |
| [ 1.495820] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.495972] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 |
| [ 1.496044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.496115] usb usb2: Product: xHCI Host Controller |
| [ 1.496173] usb usb2: Manufacturer: Linux 5.0.0-trunk-amd64 xhci-hcd |
| [ 1.496233] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.496328] ehci-pci: EHCI PCI platform driver |
| [ 1.496383] hub 2-0:1.0: USB hub found |
| [ 1.496451] hub 2-0:1.0: 4 ports detected |
| [ 1.496522] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.496713] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 |
| [ 1.496800] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.500795] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.500813] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe1b3f000 |
| [ 1.503117] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181213/utaddress-213) |
| [ 1.503237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.503850] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 1.503945] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.506443] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.508196] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 1.508293] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.509008] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 1.509103] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.509176] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.509782] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.511340] SCSI subsystem initialized |
| [ 1.513681] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.513949] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.514382] cryptd: max_cpu_qlen set to 1000 |
| [ 1.516883] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.517002] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.517074] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.517147] usb usb3: Product: EHCI Host Controller |
| [ 1.517204] usb usb3: Manufacturer: Linux 5.0.0-trunk-amd64 ehci_hcd |
| [ 1.517264] usb usb3: SerialNumber: 0000:00:1a.0 |
| [ 1.520684] libata version 3.00 loaded. |
| [ 1.521376] hub 3-0:1.0: USB hub found |
| [ 1.521448] hub 3-0:1.0: 3 ports detected |
| [ 1.523371] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.524153] ahci 0000:00:1f.2: version 3.0 |
| [ 1.524441] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.524507] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 1.524588] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.528537] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.528546] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1b40000 |
| [ 1.529390] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.536520] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.536583] ACPI: Thermal Zone [THM0] (48 C) |
| [ 1.536780] AVX version of gcm_enc/dec engaged. |
| [ 1.536858] AES CTR mode by8 optimization enabled |
| [ 1.538463] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.538523] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.539601] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.539674] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.541296] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.541407] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.541552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.541621] usb usb4: Product: EHCI Host Controller |
| [ 1.541678] usb usb4: Manufacturer: Linux 5.0.0-trunk-amd64 ehci_hcd |
| [ 1.541738] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 1.542549] hub 4-0:1.0: USB hub found |
| [ 1.543236] hub 4-0:1.0: 3 ports detected |
| [ 1.546625] scsi host0: ahci |
| [ 1.547869] scsi host1: ahci |
| [ 1.548099] scsi host2: ahci |
| [ 1.548254] scsi host3: ahci |
| [ 1.548408] scsi host4: ahci |
| [ 1.548563] scsi host5: ahci |
| [ 1.548680] ata1: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e100 irq 30 |
| [ 1.548752] ata2: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e180 irq 30 |
| [ 1.548824] ata3: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e200 irq 30 |
| [ 1.548920] ata4: DUMMY |
| [ 1.548976] ata5: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e300 irq 30 |
| [ 1.549045] ata6: DUMMY |
| [ 1.573100] [drm] Replacing VGA console driver |
| [ 1.574016] Console: switching to colour dummy device 80x25 |
| [ 1.624960] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.624969] [drm] Driver supports precise vblank timestamp query. |
| [ 1.625387] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.630876] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.674582] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0 |
| [ 1.674745] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.701931] acpi device:0d: registered as cooling_device5 |
| [ 1.702012] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| [ 1.752912] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| [ 1.752915] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.752952] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.754175] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.828903] usb 1-3: new high-speed USB device number 2 using xhci_hcd |
| [ 1.863238] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.864246] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| [ 1.864256] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 1.864664] ata1.00: configured for UDMA/133 |
| [ 1.865002] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| [ 1.868930] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.876897] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.982634] usb 1-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| [ 1.982639] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.982642] usb 1-3: Product: USB2.0 Hub |
| [ 1.982644] usb 1-3: Manufacturer: VIA Labs, Inc. |
| [ 1.983545] hub 1-3:1.0: USB hub found |
| [ 1.983737] hub 1-3:1.0: 4 ports detected |
| [ 2.000155] fbcon: inteldrmfb (fb0) is primary device |
| [ 2.029538] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.029541] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.030066] hub 3-1:1.0: USB hub found |
| [ 2.031268] hub 3-1:1.0: 6 ports detected |
| [ 2.037642] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.037645] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.037934] hub 4-1:1.0: USB hub found |
| [ 2.038144] hub 4-1:1.0: 8 ports detected |
| [ 2.088943] tsc: Refined TSC clocksource calibration: 2893.431 MHz |
| [ 2.088964] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b505e2cff, max_idle_ns: 440795342178 ns |
| [ 2.089004] clocksource: Switched to clocksource tsc |
| [ 2.170002] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 2.180134] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.217520] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 2.217523] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 2.231506] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 2.267307] ata2.00: configured for UDMA/133 |
| [ 2.276898] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.293306] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 2.293315] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.314178] usb 2-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| [ 2.314182] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.314184] usb 2-3: Product: USB3.0 Hub |
| [ 2.314186] usb 2-3: Manufacturer: VIA Labs, Inc. |
| [ 2.317252] hub 2-3:1.0: USB hub found |
| [ 2.317526] hub 2-3:1.0: 4 ports detected |
| [ 2.320897] usb 3-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.328891] usb 4-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.331542] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| [ 2.430664] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.430667] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.430669] usb 3-1.3: Product: Biometric Coprocessor |
| [ 2.430671] usb 3-1.3: Manufacturer: Auth |
| [ 2.437893] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00 |
| [ 2.437896] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.438428] hub 4-1.5:1.0: USB hub found |
| [ 2.438774] hub 4-1.5:1.0: 6 ports detected |
| [ 2.512916] usb 3-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.591922] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.592318] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.592499] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133 |
| [ 2.592502] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.593372] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.593931] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.594870] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.594878] ata3.00: configured for UDMA/133 |
| [ 2.595399] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 |
| [ 2.625672] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.625676] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.625678] usb 3-1.4: Product: BCM20702A0 |
| [ 2.625680] usb 3-1.4: Manufacturer: Broadcom Corp |
| [ 2.625681] usb 3-1.4: SerialNumber: B8763FA9D32E |
| [ 2.732957] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci |
| [ 2.810223] Console: switching to colour frame buffer device 200x67 |
| [ 2.846682] usb 4-1.5.1: New USB device found, idVendor=17ef, idProduct=604d, bcdDevice= 1.22 |
| [ 2.849426] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 2.850564] usb 4-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 |
| [ 2.860814] usb 4-1.5.1: Product: Lenovo USB Receiver |
| [ 2.867279] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.876214] usbcore: registered new interface driver usbhid |
| [ 2.877337] usbhid: USB HID core driver |
| [ 2.880521] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:17EF:604D.0001/input/input8 |
| [ 2.912851] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.928211] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| [ 2.928225] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 2.929692] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.930424] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 2.930425] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| [ 2.930433] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 2.930434] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 2.930447] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.930826] sdc: sdc1 sdc2 sdc3 |
| [ 2.931119] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 2.931138] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 2.931157] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 2.932594] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.934135] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 2.935242] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.936747] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.940456] sda: sda1 sda2 < sda5 > |
| [ 2.941176] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.944872] usb 4-1.5.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.949833] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input0 |
| [ 2.951321] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:17EF:604D.0002/input/input9 |
| [ 2.952546] sdb: sdb1 |
| [ 2.952953] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input1 |
| [ 2.954327] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 2.955764] input: Lenovo USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input10 |
| [ 2.980909] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.016928] input: Lenovo USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input11 |
| [ 3.018167] input: Lenovo USB Receiver Keypad as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input12 |
| [ 3.019528] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.065610] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.068429] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.071340] hub 4-1.5.6:1.0: USB hub found |
| [ 3.074394] hub 4-1.5.6:1.0: 4 ports detected |
| [ 3.238995] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 |
| [ 3.300879] usb 4-1.5.2: new full-speed USB device number 6 using ehci-pci |
| [ 3.316870] raid6: sse2x4 gen() 14613 MB/s |
| [ 3.384867] raid6: sse2x4 xor() 10116 MB/s |
| [ 3.412707] usb 4-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| [ 3.413914] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.418037] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:04B4:4042.0004/input/input13 |
| [ 3.452871] raid6: sse2x2 gen() 12053 MB/s |
| [ 3.478506] hid-generic 0003:04B4:4042.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0 |
| [ 3.484123] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input14 |
| [ 3.485758] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input15 |
| [ 3.488876] usb 4-1.5.6.1: new high-speed USB device number 7 using ehci-pci |
| [ 3.520868] raid6: sse2x2 xor() 8291 MB/s |
| [ 3.548913] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input16 |
| [ 3.550551] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input17 |
| [ 3.552160] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input18 |
| [ 3.553828] hid-generic 0003:04B4:4042.0005: input,hiddev1,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1 |
| [ 3.588868] raid6: sse2x1 gen() 10549 MB/s |
| [ 3.597555] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.598917] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.600625] hub 4-1.5.6.1:1.0: USB hub found |
| [ 3.602686] hub 4-1.5.6.1:1.0: 4 ports detected |
| [ 3.656869] raid6: sse2x1 xor() 7403 MB/s |
| [ 3.658144] raid6: using algorithm sse2x4 gen() 14613 MB/s |
| [ 3.659410] raid6: .... xor() 10116 MB/s, rmw enabled |
| [ 3.660678] raid6: using ssse3x2 recovery algorithm |
| [ 3.662523] xor: automatically using best checksumming function avx |
| [ 3.664337] async_tx: api initialized (async) |
| [ 3.688890] usb 4-1.5.6.2: new high-speed USB device number 8 using ehci-pci |
| [ 3.802317] usb 4-1.5.6.2: New USB device found, idVendor=0409, idProduct=0058, bcdDevice= 1.00 |
| [ 3.803651] usb 4-1.5.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.805014] usb 4-1.5.6.2: Product: USB2.0 Hub Controller |
| [ 3.806806] usb 4-1.5.6.2: Manufacturer: NEC Corporation |
| [ 3.809437] hub 4-1.5.6.2:1.0: USB hub found |
| [ 3.811448] hub 4-1.5.6.2:1.0: 4 ports detected |
| [ 3.839613] device-mapper: uevent: version 1.0.3 |
| [ 3.841561] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com |
| [ 3.892873] usb 4-1.5.6.1.2: new full-speed USB device number 9 using ehci-pci |
| [ 4.008027] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| [ 4.011737] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.014516] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller |
| [ 4.017262] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc. |
| [ 4.100959] usb 4-1.5.6.1.3: new full-speed USB device number 10 using ehci-pci |
| [ 4.215312] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| [ 4.219030] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.222703] usb 4-1.5.6.1.3: Product: USB-Serial Controller D |
| [ 4.226308] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc. |
| [ 13.206845] NET: Registered protocol family 38 |
| [ 13.335700] device-mapper: crypt: xts(aes) using implementation "xts-aes-aesni" |
| [ 13.715722] PM: Image not found (code -22) |
| [ 13.738279] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| [ 13.738282] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| [ 13.738287] PM: Marking nosave pages: [mem 0x7ff21000-0xffffffff] |
| [ 13.740949] PM: Basic memory bitmaps created |
| [ 13.741842] PM: Basic memory bitmaps freed |
| [ 13.742670] video LNXVIDEO:00: Restoring backlight state |
| [ 13.883176] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 14.109075] systemd[1]: Inserted module 'autofs4' |
| [ 14.128412] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 14.149147] systemd[1]: Detected architecture x86-64. |
| [ 14.158679] systemd[1]: Set hostname to <TP-T430s>. |
| [ 14.273271] systemd[1]: /lib/systemd/system/thinkfan.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 14.276802] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| [ 14.294027] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| [ 14.302412] systemd[1]: /etc/systemd/system/anydesk.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. |
| [ 14.325601] systemd[1]: Listening on udev Kernel Socket. |
| [ 14.327440] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 14.330890] systemd[1]: Created slice system-getty.slice. |
| [ 14.358466] loop: module loaded |
| [ 14.371003] lp: driver loaded but no devices found |
| [ 14.386232] ppdev: user-space parallel port driver |
| [ 14.388460] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 14.543300] systemd-journald[475]: Received request to flush runtime journal from PID 1 |
| [ 14.668595] ACPI: AC Adapter [AC] (on-line) |
| [ 14.671424] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 14.672799] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 14.701465] iTCO_vendor_support: vendor-support=0 |
| [ 14.705574] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 14.706926] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 14.708308] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 14.710893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 14.712295] Non-volatile memory driver v1.3 |
| [ 14.723833] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 14.725417] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 14.726767] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 14.741703] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 14.742985] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 14.744214] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-1640-g57459dbeac, EC G7HT39WW-3.22 |
| [ 14.745479] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| [ 14.754791] thinkpad_acpi: radio switch found; radios are enabled |
| [ 14.758363] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 14.759682] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 14.760978] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 14.770115] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 14.771752] wl: loading out-of-tree module taints kernel. |
| [ 14.773026] wl: module license 'MIXED/Proprietary' taints kernel. |
| [ 14.774283] Disabling lock debugging due to kernel taint |
| [ 14.777336] wl: module verification failed: signature and/or required key missing - tainting kernel |
| [ 14.781838] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 14.786582] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 14.788832] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 14.792706] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 14.792711] battery: new extension: ThinkPad Battery Extension |
| [ 14.795708] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input19 |
| [ 14.805903] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0 |
| [ 14.805939] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 14.813899] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| |
| [ 14.828324] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 14.829816] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 14.831277] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 14.832752] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 14.834231] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 14.836222] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 14.838098] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 14.839608] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 14.850644] input: PC Speaker as /devices/platform/pcspkr/input/input21 |
| [ 14.860209] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 14.861641] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 14.863066] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 14.863342] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 |
| [ 14.864468] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 14.866300] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 |
| [ 14.868943] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 |
| [ 14.870495] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 |
| [ 14.872059] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 |
| [ 14.875197] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 |
| [ 14.876861] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 |
| [ 14.878531] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 |
| [ 14.970862] intel_rapl: Found RAPL domain package |
| [ 14.972352] intel_rapl: Found RAPL domain core |
| [ 14.973617] intel_rapl: Found RAPL domain uncore |
| [ 15.040882] usb 3-1.6: new full-speed USB device number 5 using ehci-pci |
| [ 15.054147] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 15.157814] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| [ 15.253513] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 15.257941] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 15.381426] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 15.454438] audit: type=1400 audit(1557873451.637:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1126 comm="apparmor_parser" |
| [ 15.455746] audit: type=1400 audit(1557873451.637:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1126 comm="apparmor_parser" |
| [ 15.457177] audit: type=1400 audit(1557873451.637:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1126 comm="apparmor_parser" |
| [ 15.458221] audit: type=1400 audit(1557873451.637:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1125 comm="apparmor_parser" |
| [ 15.459220] audit: type=1400 audit(1557873451.641:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1128 comm="apparmor_parser" |
| [ 15.461556] audit: type=1400 audit(1557873451.645:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1127 comm="apparmor_parser" |
| [ 15.464059] audit: type=1400 audit(1557873451.645:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1134 comm="apparmor_parser" |
| [ 15.465184] audit: type=1400 audit(1557873451.645:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1132 comm="apparmor_parser" |
| [ 15.466442] audit: type=1400 audit(1557873451.653:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1136 comm="apparmor_parser" |
| [ 15.467941] audit: type=1400 audit(1557873451.653:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1135 comm="apparmor_parser" |
| [ 15.689072] Process accounting resumed |
| [ 17.222465] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 17.276128] Bluetooth: Core ver 2.22 |
| [ 17.276148] NET: Registered protocol family 31 |
| [ 17.276149] Bluetooth: HCI device and connection manager initialized |
| [ 17.276155] Bluetooth: HCI socket layer initialized |
| [ 17.276157] Bluetooth: L2CAP socket layer initialized |
| [ 17.276162] Bluetooth: SCO socket layer initialized |
| [ 17.284535] usbcore: registered new interface driver btusb |
| [ 17.332250] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 17.332253] Bluetooth: BNEP filters: protocol multicast |
| [ 17.332257] Bluetooth: BNEP socket layer initialized |
| [ 17.395139] Bluetooth: hci0: BCM: chip id 63 |
| [ 17.396153] Bluetooth: hci0: BCM: features 0x07 |
| [ 17.412138] Bluetooth: hci0: TP-T430s |
| [ 17.416154] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 17.419781] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 18.295074] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 18.311075] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 18.847411] usblp 4-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 18.847440] usbcore: registered new interface driver usblp |
| [ 18.860631] usbcore: registered new interface driver usbserial_generic |
| [ 18.860640] usbserial: USB Serial support registered for generic |
| [ 18.862868] usbcore: registered new interface driver pl2303 |
| [ 18.862876] usbserial: USB Serial support registered for pl2303 |
| [ 18.862897] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 18.865888] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 18.982908] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 18.982954] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready |
| [ 19.275202] Bluetooth: RFCOMM TTY layer initialized |
| [ 19.275214] Bluetooth: RFCOMM socket layer initialized |
| [ 19.275221] Bluetooth: RFCOMM ver 1.11 |
| [ 23.979008] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 24.954481] vboxdrv: Found 4 processor cores |
| [ 24.973075] vboxdrv: TSC mode is Invariant, tentative frequency 2893419395 Hz |
| [ 24.973078] vboxdrv: Successfully loaded version 6.0.6_Debian (interface 0x00290008) |
| [ 24.986289] VBoxNetFlt: Successfully started. |
| [ 24.996801] VBoxNetAdp: Successfully started. |
| [ 25.007809] VBoxPciLinuxInit |
| [ 25.013367] vboxpci: IOMMU not found (not registered) |
| [ 25.337418] kauditd_printk_skb: 25 callbacks suppressed |
| [ 25.337419] audit: type=1400 audit(1557873461.521:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2649 comm="apparmor_parser" |
| [ 25.440795] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 25.442299] Bridge firewalling registered |
| [ 25.689698] Initializing XFRM netlink socket |
| [ 25.749085] usb 3-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 26.681081] usb 3-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 26.800589] audit: type=1400 audit(1557873462.981:38): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=1344 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [ 26.800605] audit: type=1400 audit(1557873462.981:39): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=1344 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [ 28.746252] fuse init (API version 7.28) |
| [ 30.920803] rfkill: input handler disabled |
| [ 31.601456] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 144.359050] test1 |
| [ 144.359055] test2 |
| [ 172.351336] test1 |
| [ 172.351339] test2 |
| [ 315.845910] Process accounting resumed |
| [ 448.957408] e1000e: enp0s25 NIC Link is Down |
| [ 449.115307] PM: suspend entry (deep) |
| [ 449.115311] PM: Syncing filesystems ... done. |
| [ 449.123081] (NULL device *): firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 449.123093] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [ 449.124978] OOM killer disabled. |
| [ 449.124979] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 449.126094] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 449.144978] sd 2:0:0:0: [sdc] Synchronizing SCSI cache |
| [ 449.145936] sd 2:0:0:0: [sdc] Stopping disk |
| [ 449.273025] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 449.273071] sd 1:0:0:0: [sdb] Synchronizing SCSI cache |
| [ 449.273311] sd 1:0:0:0: [sdb] Stopping disk |
| [ 449.275412] sd 0:0:0:0: [sda] Stopping disk |
| [ 449.464977] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 450.182478] ACPI: EC: interrupt blocked |
| [ 450.229315] ACPI: Preparing to enter system sleep state S3 |
| [ 450.232453] ACPI: EC: event blocked |
| [ 450.232453] ACPI: EC: EC stopped |
| [ 450.232454] PM: Saving platform NVS memory |
| [ 450.232455] Disabling non-boot CPUs ... |
| [ 450.234079] smpboot: CPU 1 is now offline |
| [ 450.239155] IRQ 31: no longer affine to CPU2 |
| [ 450.240182] smpboot: CPU 2 is now offline |
| [ 450.245010] IRQ 17: no longer affine to CPU3 |
| [ 450.245015] IRQ 26: no longer affine to CPU3 |
| [ 450.245017] IRQ 27: no longer affine to CPU3 |
| [ 450.245019] IRQ 29: no longer affine to CPU3 |
| [ 450.246026] smpboot: CPU 3 is now offline |
| [ 450.249665] ACPI: Low-level resume complete |
| [ 450.249701] ACPI: EC: EC started |
| [ 450.249702] PM: Restoring platform NVS memory |
| [ 450.250031] Enabling non-boot CPUs ... |
| [ 450.250068] x86: Booting SMP configuration: |
| [ 450.250068] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 450.252564] cache: parent cpu1 should not be sleeping |
| [ 450.253182] CPU1 is up |
| [ 450.253209] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 450.255947] cache: parent cpu2 should not be sleeping |
| [ 450.256390] CPU2 is up |
| [ 450.256434] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 450.259306] cache: parent cpu3 should not be sleeping |
| [ 450.259787] CPU3 is up |
| [ 450.266595] ACPI: Waking up from system sleep state S3 |
| [ 450.269077] ACPI: EC: interrupt unblocked |
| [ 450.286945] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 450.308781] ACPI: EC: event unblocked |
| [ 450.310784] ACPI: button: The lid device is not compliant to SW_LID. |
| [ 450.319879] sd 0:0:0:0: [sda] Starting disk |
| [ 450.319880] sd 1:0:0:0: [sdb] Starting disk |
| [ 450.319900] sd 2:0:0:0: [sdc] Starting disk |
| [ 450.421048] usb 2-3: Disable of device-initiated U1 failed. |
| [ 450.424545] usb 2-3: Disable of device-initiated U2 failed. |
| [ 450.562209] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci |
| [ 450.574207] usb 4-1.5: reset high-speed USB device number 3 using ehci-pci |
| [ 450.611359] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 450.624423] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 450.624463] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 450.624491] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 450.624798] ata3.00: supports DRM functions and may not be fully accessible |
| [ 450.624923] ata1.00: configured for UDMA/133 |
| [ 450.625550] ata3.00: Trusted Computing capability qword not valid! |
| [ 450.625979] ata3.00: supports DRM functions and may not be fully accessible |
| [ 450.626803] ata3.00: Trusted Computing capability qword not valid! |
| [ 450.626810] ata3.00: configured for UDMA/133 |
| [ 450.826295] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 450.878589] usb 1-3: reset high-speed USB device number 2 using xhci_hcd |
| [ 450.978298] usb 4-1.5.1: reset full-speed USB device number 4 using ehci-pci |
| [ 451.016912] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 451.119582] input input8: event field not found |
| [ 451.119585] input input8: event field not found |
| [ 451.119587] input input8: event field not found |
| [ 451.119589] input input8: event field not found |
| [ 451.119590] input input8: event field not found |
| [ 451.119591] input input8: event field not found |
| [ 451.119593] input input8: event field not found |
| [ 451.119594] input input8: event field not found |
| [ 451.166298] usb 4-1.5.6: reset high-speed USB device number 5 using ehci-pci |
| [ 451.354339] usb 4-1.5.2: reset full-speed USB device number 6 using ehci-pci |
| [ 451.570314] usb 4-1.5.6.1: reset high-speed USB device number 7 using ehci-pci |
| [ 451.974287] usb 4-1.5.6.1.2: reset full-speed USB device number 9 using ehci-pci |
| [ 452.084789] usblp2: removed |
| [ 452.162322] usb 4-1.5.6.1.3: reset full-speed USB device number 10 using ehci-pci |
| [ 452.271390] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 |
| [ 452.271420] pl2303 4-1.5.6.1.3:1.0: device disconnected |
| [ 452.558317] usb 4-1.5.1: reset full-speed USB device number 4 using ehci-pci |
| [ 453.322327] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 453.409844] ata2.00: configured for UDMA/133 |
| [ 454.293692] OOM killer enabled. |
| [ 454.293694] Restarting tasks ... |
| [ 454.298152] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 454.298854] done. |
| [ 454.301611] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 454.302743] usblp 4-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 454.304484] usb 4-1.5.6.2: USB disconnect, device number 8 |
| [ 454.326011] video LNXVIDEO:00: Restoring backlight state |
| [ 454.378340] usb 3-1.6: new high-speed USB device number 6 using ehci-pci |
| [ 454.394536] PM: suspend exit |
| [ 454.498466] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 454.498470] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 454.498472] usb 3-1.6: Product: Integrated Camera |
| [ 454.498474] usb 3-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 454.500479] Bluetooth: hci0: BCM: chip id 63 |
| [ 454.501474] Bluetooth: hci0: BCM: features 0x07 |
| [ 454.517489] Bluetooth: hci0: BCM20702A |
| [ 454.518480] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 455.168086] media: Linux media interface: v0.10 |
| [ 455.186158] videodev: Linux video capture interface: v2.00 |
| [ 455.211493] ERROR @wl_cfg80211_scan : |
| [ 455.211495] WLC_SCAN error (-22) |
| [ 455.225458] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 455.232259] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 455.232264] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 455.232267] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 455.232269] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 455.232503] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input29 |
| [ 455.233869] usbcore: registered new interface driver uvcvideo |
| [ 455.233873] USB Video Class driver (1.1.1) |
| [ 455.388469] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 455.404468] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 457.680208] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 457.680249] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready |
| [ 458.042883] ERROR @wl_cfg80211_scan : |
| [ 458.042885] WLC_SCAN error (-22) |
| [ 463.704267] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 485.455049] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 3915.482382] usb 4-1.5.6.2: new high-speed USB device number 11 using ehci-pci |
| [ 3915.591849] usb 4-1.5.6.2: New USB device found, idVendor=0409, idProduct=0058, bcdDevice= 1.00 |
| [ 3915.591856] usb 4-1.5.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3915.591859] usb 4-1.5.6.2: Product: USB2.0 Hub Controller |
| [ 3915.591861] usb 4-1.5.6.2: Manufacturer: NEC Corporation |
| [ 3915.592637] hub 4-1.5.6.2:1.0: USB hub found |
| [ 3915.592774] hub 4-1.5.6.2:1.0: 4 ports detected |
| [10334.738754] usb 3-1.6: USB disconnect, device number 6 |
| [10463.114641] usb 3-1.6: new high-speed USB device number 7 using ehci-pci |
| [10463.230437] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [10463.230444] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [10463.230447] usb 3-1.6: Product: Integrated Camera |
| [10463.230450] usb 3-1.6: Manufacturer: Ricoh Company Ltd. |
| [10463.231562] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [10463.237405] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [10463.237421] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [10463.237427] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [10463.237432] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [10463.237652] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input30 |
| [10466.530780] usb 3-1.6: USB disconnect, device number 7 |
| [11815.638316] e1000e: enp0s25 NIC Link is Down |
| [11815.819551] PM: suspend entry (deep) |
| [11815.819555] PM: Syncing filesystems ... done. |
| [11815.860490] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [11815.862846] OOM killer disabled. |
| [11815.862847] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [11815.864119] printk: Suspending console(s) (use no_console_suspend to debug) |
| [11815.886856] sd 2:0:0:0: [sdc] Synchronizing SCSI cache |
| [11815.892511] sd 2:0:0:0: [sdc] Stopping disk |
| [11816.006761] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [11816.008428] sd 0:0:0:0: [sda] Stopping disk |
| [11816.014800] sd 1:0:0:0: [sdb] Synchronizing SCSI cache |
| [11816.015064] sd 1:0:0:0: [sdb] Stopping disk |
| [11816.199084] e1000e: EEE TX LPI TIMER: 00000011 |
| [11816.979970] ACPI: EC: interrupt blocked |
| [11817.023223] ACPI: Preparing to enter system sleep state S3 |
| [11817.026406] ACPI: EC: event blocked |
| [11817.026406] ACPI: EC: EC stopped |
| [11817.026407] PM: Saving platform NVS memory |
| [11817.026409] Disabling non-boot CPUs ... |
| [11817.028874] smpboot: CPU 1 is now offline |
| [11817.032923] IRQ 31: no longer affine to CPU2 |
| [11817.034558] smpboot: CPU 2 is now offline |
| [11817.038251] IRQ 16: no longer affine to CPU3 |
| [11817.038255] IRQ 17: no longer affine to CPU3 |
| [11817.038260] IRQ 26: no longer affine to CPU3 |
| [11817.039285] smpboot: CPU 3 is now offline |
| [11817.044266] ACPI: Low-level resume complete |
| [11817.044304] ACPI: EC: EC started |
| [11817.044305] PM: Restoring platform NVS memory |
| [11817.044626] Enabling non-boot CPUs ... |
| [11817.044661] x86: Booting SMP configuration: |
| [11817.044662] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [11817.047192] cache: parent cpu1 should not be sleeping |
| [11817.047771] CPU1 is up |
| [11817.047796] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [11817.050308] cache: parent cpu2 should not be sleeping |
| [11817.050748] CPU2 is up |
| [11817.050790] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [11817.053626] cache: parent cpu3 should not be sleeping |
| [11817.054098] CPU3 is up |
| [11817.057545] ACPI: Waking up from system sleep state S3 |
| [11817.059970] ACPI: EC: interrupt unblocked |
| [11817.080983] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [11817.102899] ACPI: EC: event unblocked |
| [11817.118443] sd 0:0:0:0: [sda] Starting disk |
| [11817.118444] sd 1:0:0:0: [sdb] Starting disk |
| [11817.118445] sd 2:0:0:0: [sdc] Starting disk |
| [11817.215303] usb 2-3: Disable of device-initiated U1 failed. |
| [11817.218805] usb 2-3: Disable of device-initiated U2 failed. |
| [11817.364321] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci |
| [11817.364327] usb 4-1.5: reset high-speed USB device number 3 using ehci-pci |
| [11817.405426] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [11817.418570] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [11817.418621] ata5: SATA link down (SStatus 0 SControl 300) |
| [11817.419884] ata1.00: configured for UDMA/133 |
| [11817.422565] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [11817.422906] ata3.00: supports DRM functions and may not be fully accessible |
| [11817.423673] ata3.00: Trusted Computing capability qword not valid! |
| [11817.424105] ata3.00: supports DRM functions and may not be fully accessible |
| [11817.424892] ata3.00: Trusted Computing capability qword not valid! |
| [11817.424897] ata3.00: configured for UDMA/133 |
| [11817.612455] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [11817.672762] usb 1-3: reset high-speed USB device number 2 using xhci_hcd |
| [11817.768446] usb 4-1.5.6: reset high-speed USB device number 5 using ehci-pci |
| [11817.810395] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [11817.956441] usb 4-1.5.1: reset full-speed USB device number 4 using ehci-pci |
| [11818.073394] input input8: event field not found |
| [11818.073400] input input8: event field not found |
| [11818.073403] input input8: event field not found |
| [11818.073406] input input8: event field not found |
| [11818.073409] input input8: event field not found |
| [11818.073412] input input8: event field not found |
| [11818.073414] input input8: event field not found |
| [11818.073416] input input8: event field not found |
| [11818.144470] usb 4-1.5.2: reset full-speed USB device number 6 using ehci-pci |
| [11818.332457] usb 4-1.5.6.2: reset high-speed USB device number 11 using ehci-pci |
| [11818.520458] usb 4-1.5.6.1: reset high-speed USB device number 7 using ehci-pci |
| [11818.924436] usb 4-1.5.6.1.2: reset full-speed USB device number 9 using ehci-pci |
| [11819.034637] usblp2: removed |
| [11819.112454] usb 4-1.5.6.1.3: reset full-speed USB device number 10 using ehci-pci |
| [11819.221920] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 |
| [11819.221957] pl2303 4-1.5.6.1.3:1.0: device disconnected |
| [11819.222636] OOM killer enabled. |
| [11819.222639] Restarting tasks ... done. |
| [11819.226672] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| [11819.234976] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [11819.235959] usblp 4-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [11819.239780] video LNXVIDEO:00: Restoring backlight state |
| [11819.292045] PM: suspend exit |
| [11819.324328] usb 3-1.6: new high-speed USB device number 9 using ehci-pci |
| [11819.346640] Bluetooth: hci0: BCM: chip id 63 |
| [11819.347639] Bluetooth: hci0: BCM: features 0x07 |
| [11819.363642] Bluetooth: hci0: BCM20702A |
| [11819.364647] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [11819.364729] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [11819.444626] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [11819.444631] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [11819.444633] usb 3-1.6: Product: Integrated Camera |
| [11819.444635] usb 3-1.6: Manufacturer: Ricoh Company Ltd. |
| [11819.445640] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [11819.451729] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [11819.451733] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [11819.451736] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [11819.451738] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [11819.451819] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input31 |
| [11820.120382] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [11820.207065] ata2.00: configured for UDMA/133 |
| [11820.819767] ERROR @wl_cfg80211_scan : |
| [11820.819769] WLC_SCAN error (-22) |
| [11821.242615] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [11821.261623] Bluetooth: hci0: Broadcom Bluetooth Device |
| [11824.078256] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [11824.078297] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready |
| [11828.046279] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [11829.336962] audit: type=1400 audit(1558042744.287:40): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=28505 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [11829.337324] audit: type=1400 audit(1558042744.287:41): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=28505 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [11829.586320] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [11855.084361] thinkpad_acpi: fan watchdog: enabling fan |
| [12120.075285] Process accounting resumed |
| [13088.078017] audit: type=1400 audit(1558044003.027:42): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=31910 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [13088.078032] audit: type=1400 audit(1558044003.027:43): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=31910 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [13524.452793] test1 |
| [13524.452811] test2 |
| [13850.286365] VBoxPciLinuxLinuxUnload |
| [13879.116254] vboxdrv: Found 4 processor cores |
| [13879.136925] vboxdrv: TSC mode is Invariant, tentative frequency 2893430770 Hz |
| [13879.136932] vboxdrv: Successfully loaded version 6.0.8_Debian (interface 0x00290008) |
| [13879.150779] VBoxNetFlt: Successfully started. |
| [13879.161492] VBoxNetAdp: Successfully started. |
| [13879.170907] VBoxPciLinuxInit |
| [13879.173373] vboxpci: IOMMU not found (not registered) |
| [13952.310043] SGI XFS with ACLs, security attributes, realtime, no debug enabled |
| [13952.323810] JFS: nTxBlock = 8192, nTxLock = 65536 |
| [13952.340201] ntfs: driver 2.1.32 [Flags: R/O MODULE]. |
| [13952.359865] QNX4 filesystem 0.2.3 registered. |
| [13952.416331] Btrfs loaded, crc32c=crc32c-intel |
| [15682.596551] e1000e: enp0s25 NIC Link is Down |
| [15682.769195] PM: suspend entry (deep) |
| [15682.769200] PM: Syncing filesystems ... done. |
| [15682.777916] (NULL device *): firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [15682.777978] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [15682.780108] OOM killer disabled. |
| [15682.780110] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [15682.781353] printk: Suspending console(s) (use no_console_suspend to debug) |
| [15682.796608] sd 2:0:0:0: [sdc] Synchronizing SCSI cache |
| [15682.797816] sd 2:0:0:0: [sdc] Stopping disk |
| [15682.924556] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [15682.925899] sd 0:0:0:0: [sda] Stopping disk |
| [15682.940558] sd 1:0:0:0: [sdb] Synchronizing SCSI cache |
| [15682.940779] sd 1:0:0:0: [sdb] Stopping disk |
| [15683.117071] e1000e: EEE TX LPI TIMER: 00000011 |
| [15683.921772] ACPI: EC: interrupt blocked |
| [15683.965047] ACPI: Preparing to enter system sleep state S3 |
| [15683.968353] ACPI: EC: event blocked |
| [15683.968354] ACPI: EC: EC stopped |
| [15683.968355] PM: Saving platform NVS memory |
| [15683.968356] Disabling non-boot CPUs ... |
| [15683.970204] smpboot: CPU 1 is now offline |
| [15683.975176] IRQ 31: no longer affine to CPU2 |
| [15683.976207] smpboot: CPU 2 is now offline |
| [15683.981137] IRQ 16: no longer affine to CPU3 |
| [15683.981142] IRQ 17: no longer affine to CPU3 |
| [15683.981146] IRQ 19: no longer affine to CPU3 |
| [15683.981150] IRQ 26: no longer affine to CPU3 |
| [15683.982161] smpboot: CPU 3 is now offline |
| [15683.985074] ACPI: Low-level resume complete |
| [15683.985110] ACPI: EC: EC started |
| [15683.985111] PM: Restoring platform NVS memory |
| [15683.985442] Enabling non-boot CPUs ... |
| [15683.985479] x86: Booting SMP configuration: |
| [15683.985480] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [15683.988018] cache: parent cpu1 should not be sleeping |
| [15683.988711] CPU1 is up |
| [15683.988735] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [15683.991445] cache: parent cpu2 should not be sleeping |
| [15683.991937] CPU2 is up |
| [15683.991980] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [15683.994847] cache: parent cpu3 should not be sleeping |
| [15683.995375] CPU3 is up |
| [15684.002176] ACPI: Waking up from system sleep state S3 |
| [15684.004627] ACPI: EC: interrupt unblocked |
| [15684.022403] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [15684.044128] ACPI: EC: event unblocked |
| [15684.054966] sd 0:0:0:0: [sda] Starting disk |
| [15684.054967] sd 2:0:0:0: [sdc] Starting disk |
| [15684.054968] sd 1:0:0:0: [sdb] Starting disk |
| [15684.160716] usb 2-3: Disable of device-initiated U1 failed. |
| [15684.164215] usb 2-3: Disable of device-initiated U2 failed. |
| [15684.309773] usb 3-1.6: reset high-speed USB device number 9 using ehci-pci |
| [15684.309786] usb 4-1.5: reset high-speed USB device number 3 using ehci-pci |
| [15684.354958] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [15684.364024] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [15684.364050] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [15684.364384] ata3.00: supports DRM functions and may not be fully accessible |
| [15684.365091] ata1.00: configured for UDMA/133 |
| [15684.365242] ata3.00: Trusted Computing capability qword not valid! |
| [15684.365681] ata3.00: supports DRM functions and may not be fully accessible |
| [15684.366501] ata3.00: Trusted Computing capability qword not valid! |
| [15684.366506] ata3.00: configured for UDMA/133 |
| [15684.368027] ata5: SATA link down (SStatus 0 SControl 300) |
| [15684.505854] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci |
| [15684.557852] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [15684.622154] usb 1-3: reset high-speed USB device number 2 using xhci_hcd |
| [15684.713907] usb 4-1.5.6: reset high-speed USB device number 5 using ehci-pci |
| [15684.753156] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [15684.901924] usb 4-1.5.1: reset full-speed USB device number 4 using ehci-pci |
| [15685.018570] input input8: event field not found |
| [15685.018578] input input8: event field not found |
| [15685.018581] input input8: event field not found |
| [15685.018585] input input8: event field not found |
| [15685.018589] input input8: event field not found |
| [15685.018595] input input8: event field not found |
| [15685.018601] input input8: event field not found |
| [15685.018603] input input8: event field not found |
| [15685.089950] usb 4-1.5.2: reset full-speed USB device number 6 using ehci-pci |
| [15685.277919] usb 4-1.5.6.2: reset high-speed USB device number 11 using ehci-pci |
| [15685.465873] usb 4-1.5.6.1: reset high-speed USB device number 7 using ehci-pci |
| [15685.869915] usb 4-1.5.6.1.3: reset full-speed USB device number 10 using ehci-pci |
| [15685.979639] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 |
| [15685.979677] pl2303 4-1.5.6.1.3:1.0: device disconnected |
| [15686.057898] usb 4-1.5.6.1.2: reset full-speed USB device number 9 using ehci-pci |
| [15686.168360] usblp2: removed |
| [15686.169038] OOM killer enabled. |
| [15686.169041] Restarting tasks ... done. |
| [15686.181865] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| [15686.185234] video LNXVIDEO:00: Restoring backlight state |
| [15686.185780] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [15686.223303] usblp 4-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [15686.259423] PM: suspend exit |
| [15686.339058] Bluetooth: hci0: BCM: chip id 63 |
| [15686.340043] Bluetooth: hci0: BCM: features 0x07 |
| [15686.356032] Bluetooth: hci0: BCM20702A |
| [15686.357028] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [15687.073836] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [15687.160649] ata2.00: configured for UDMA/133 |
| [15687.228019] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [15687.244073] Bluetooth: hci0: Broadcom Bluetooth Device |
| [15687.766358] ERROR @wl_cfg80211_scan : |
| [15687.766359] WLC_SCAN error (-22) |
| [15691.011773] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [15691.011813] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready |
| [15695.147799] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [15696.551868] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [15986.423776] Process accounting resumed |
| [20919.414177] usb 3-1.6: USB disconnect, device number 9 |
| [23386.241630] audit: type=1400 audit(1558130403.251:44): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=15638 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [23386.241644] audit: type=1400 audit(1558130403.251:45): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=15638 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [24267.462151] usb 3-1.6: new high-speed USB device number 14 using ehci-pci |
| [24267.577861] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [24267.577867] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [24267.577871] usb 3-1.6: Product: Integrated Camera |
| [24267.577873] usb 3-1.6: Manufacturer: Ricoh Company Ltd. |
| [24267.578986] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [24267.584852] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [24267.584861] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [24267.584867] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [24267.584873] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [24267.585093] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input32 |
| [24271.014304] usb 3-1.6: USB disconnect, device number 14 |
| [24275.726152] usb 3-1.6: new high-speed USB device number 15 using ehci-pci |
| [24275.841915] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [24275.841922] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [24275.841926] usb 3-1.6: Product: Integrated Camera |
| [24275.841928] usb 3-1.6: Manufacturer: Ricoh Company Ltd. |
| [24275.843073] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [24275.849095] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [24275.849102] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [24275.849105] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [24275.849108] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [24275.849232] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input33 |
| [24279.390238] usb 3-1.6: USB disconnect, device number 15 |
| [25067.714201] usb 3-1.6: new full-speed USB device number 16 using ehci-pci |
| [25316.526187] usb 3-1.6: new high-speed USB device number 17 using ehci-pci |
| [25316.641988] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [25316.641996] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [25316.641999] usb 3-1.6: Product: Integrated Camera |
| [25316.642002] usb 3-1.6: Manufacturer: Ricoh Company Ltd. |
| [25316.643137] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [25316.648924] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [25316.648931] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [25316.648934] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [25316.648937] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [25316.649070] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input34 |
| [25320.190361] usb 3-1.6: USB disconnect, device number 17 |
| [26545.366587] VBoxPciLinuxLinuxUnload |
| [26574.636403] vboxdrv: Found 4 processor cores |
| [26574.654653] vboxdrv: TSC mode is Invariant, tentative frequency 2893427639 Hz |
| [26574.654658] vboxdrv: Successfully loaded version 6.0.8_Debian (interface 0x00290008) |
| [26574.668397] VBoxNetFlt: Successfully started. |
| [26574.677719] VBoxNetAdp: Successfully started. |
| [26574.687601] VBoxPciLinuxInit |
| [26574.689607] vboxpci: IOMMU not found (not registered) |