blob: 3d20a6b5b899ea07a9194be4e7ac3eadcaf0954d [file] [log] [blame]
[ 0.000000] Linux version 5.0.0-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-3)) #1 SMP Debian 5.0.2-1~exp1 (2019-03-18)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.0.0-trunk-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff22fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff23000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.9-1491-g4d6cfc82ed 05/02/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.600 MHz processor
[ 0.001951] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001952] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001956] last_pfn = 0x47b600 max_arch_pfn = 0x400000000
[ 0.001960] MTRR default type: write-back
[ 0.001961] MTRR fixed ranges enabled:
[ 0.001962] 00000-9FFFF write-back
[ 0.001962] A0000-BFFFF uncachable
[ 0.001963] C0000-FFFFF write-back
[ 0.001964] MTRR variable ranges enabled:
[ 0.001965] 0 base 080000000 mask FC0000000 uncachable
[ 0.001966] 1 base 0C0000000 mask FF0000000 uncachable
[ 0.001966] 2 base 0D0000000 mask FF0000000 write-combining
[ 0.001967] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.001967] 4 disabled
[ 0.001968] 5 disabled
[ 0.001968] 6 disabled
[ 0.001969] 7 disabled
[ 0.001969] 8 disabled
[ 0.001969] 9 disabled
[ 0.002716] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003073] last_pfn = 0x7ff23 max_arch_pfn = 0x400000000
[ 0.012500] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.012504] BRK [0x3ad801000, 0x3ad801fff] PGTABLE
[ 0.012506] BRK [0x3ad802000, 0x3ad802fff] PGTABLE
[ 0.012507] BRK [0x3ad803000, 0x3ad803fff] PGTABLE
[ 0.012534] BRK [0x3ad804000, 0x3ad804fff] PGTABLE
[ 0.012535] BRK [0x3ad805000, 0x3ad805fff] PGTABLE
[ 0.012617] BRK [0x3ad806000, 0x3ad806fff] PGTABLE
[ 0.012638] BRK [0x3ad807000, 0x3ad807fff] PGTABLE
[ 0.012802] RAMDISK: [mem 0x31453000-0x34a20fff]
[ 0.012808] ACPI: Early table checksum verification disabled
[ 0.012866] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[ 0.012870] ACPI: XSDT 0x000000007FF490E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190108)
[ 0.012874] ACPI: FACP 0x000000007FF4CB20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190108)
[ 0.012879] ACPI: DSDT 0x000000007FF49280 00389F (v02 COREv4 COREBOOT 20110725 INTL 20190108)
[ 0.012882] ACPI: FACS 0x000000007FF49240 000040
[ 0.012884] ACPI: FACS 0x000000007FF49240 000040
[ 0.012886] ACPI: SSDT 0x000000007FF4CC20 001A32 (v02 COREv4 COREBOOT 0000002A CORE 20190108)
[ 0.012888] ACPI: MCFG 0x000000007FF4E660 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190108)
[ 0.012891] ACPI: TCPA 0x000000007FF4E6A0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190108)
[ 0.012893] ACPI: APIC 0x000000007FF4E6E0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190108)
[ 0.012896] ACPI: DMAR 0x000000007FF4E750 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190108)
[ 0.012899] ACPI: HPET 0x000000007FF50820 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190108)
[ 0.012905] ACPI: Local APIC address 0xfee00000
[ 0.012976] No NUMA configuration found
[ 0.012977] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
[ 0.012981] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff]
[ 0.013008] Zone ranges:
[ 0.013009] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013010] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013012] Normal [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.013012] Device empty
[ 0.013013] Movable zone start for each node
[ 0.013014] Early memory node ranges
[ 0.013015] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.013016] node 0: [mem 0x0000000000100000-0x000000007ff22fff]
[ 0.013017] node 0: [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.013027] Zeroed struct page in unavailable ranges: 319 pages
[ 0.013028] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
[ 0.013030] On node 0 totalpages: 4175041
[ 0.013031] DMA zone: 64 pages used for memmap
[ 0.013031] DMA zone: 21 pages reserved
[ 0.013032] DMA zone: 3998 pages, LIFO batch:0
[ 0.013127] DMA32 zone: 8125 pages used for memmap
[ 0.013128] DMA32 zone: 519971 pages, LIFO batch:63
[ 0.026590] Normal zone: 57048 pages used for memmap
[ 0.026592] Normal zone: 3651072 pages, LIFO batch:63
[ 0.109271] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.109547] ACPI: PM-Timer IO Port: 0x508
[ 0.109550] ACPI: Local APIC address 0xfee00000
[ 0.109565] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.109567] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.109569] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.109571] ACPI: IRQ0 used by override.
[ 0.109571] ACPI: IRQ9 used by override.
[ 0.109573] Using ACPI (MADT) for SMP configuration information
[ 0.109575] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.109580] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.109589] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.109590] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.109591] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.109592] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.109593] PM: Registered nosave memory: [mem 0x7ff23000-0x829fffff]
[ 0.109594] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.109595] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.109595] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.109596] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.109597] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.109598] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.109598] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.109600] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.109601] Booting paravirtualized kernel on bare hardware
[ 0.109604] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.205470] random: get_random_bytes called from start_kernel+0x93/0x501 with crng_init=0
[ 0.205475] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.205637] percpu: Embedded 44 pages/cpu @(____ptrval____) s142936 r8192 d29096 u524288
[ 0.205643] pcpu-alloc: s142936 r8192 d29096 u524288 alloc=1*2097152
[ 0.205644] pcpu-alloc: [0] 0 1 2 3
[ 0.205659] Built 1 zonelists, mobility grouping on. Total pages: 4109783
[ 0.205660] Policy zone: Normal
[ 0.205661] Kernel command line: BOOT_IMAGE=/vmlinuz-5.0.0-trunk-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.208746] Calgary: detecting Calgary via BIOS EBDA area
[ 0.208751] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.247357] Memory: 16291328K/16700164K available (10243K kernel code, 1167K rwdata, 3244K rodata, 1580K init, 2352K bss, 408836K reserved, 0K cma-reserved)
[ 0.247460] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.247465] Kernel/User page tables isolation: enabled
[ 0.247478] ftrace: allocating 31966 entries in 125 pages
[ 0.258686] rcu: Hierarchical RCU implementation.
[ 0.258688] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.258690] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.258690] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.261431] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.263180] Console: colour VGA+ 80x25
[ 0.268523] printk: console [tty0] enabled
[ 0.268592] ACPI: Core revision 20181213
[ 0.268782] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.268863] hpet clockevent registered
[ 0.268868] APIC: Switch to symmetric I/O mode setup
[ 0.268925] DMAR: Host address width 36
[ 0.268979] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.269039] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.269106] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.269164] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.269221] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.269291] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.269349] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.269407] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.269858] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.269918] x2apic enabled
[ 0.269975] Switched APIC routing to cluster x2apic.
[ 0.270454] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.288867] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b5a52657c, max_idle_ns: 440795314482 ns
[ 0.288952] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.20 BogoMIPS (lpj=11574400)
[ 0.289027] pid_max: default: 32768 minimum: 301
[ 0.289104] LSM: Security Framework initializing
[ 0.289161] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.289233] AppArmor: AppArmor initialized
[ 0.291426] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.292581] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.292696] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.292787] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.293124] mce: CPU supports 7 MCE banks
[ 0.293188] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.293251] process: using mwait in idle threads
[ 0.293309] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.293364] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.293423] Spectre V2 : Mitigation: Full generic retpoline
[ 0.293481] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.293548] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.293613] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.293683] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.293743] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.293959] Freeing SMP alternatives memory: 24K
[ 0.295540] TSC deadline timer enabled
[ 0.295542] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.295690] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.295781] ... version: 3
[ 0.295834] ... bit width: 48
[ 0.295891] ... generic registers: 4
[ 0.295947] ... value mask: 0000ffffffffffff
[ 0.296004] ... max period: 00007fffffffffff
[ 0.296061] ... fixed-purpose events: 3
[ 0.296117] ... event mask: 000000070000000f
[ 0.296204] rcu: Hierarchical SRCU implementation.
[ 0.296568] random: crng done (trusting CPU's manufacturer)
[ 0.296808] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.296905] smp: Bringing up secondary CPUs ...
[ 0.296941] x86: Booting SMP configuration:
[ 0.296941] .... node #0, CPUs: #1 #2 #3
[ 0.300987] smp: Brought up 1 node, 4 CPUs
[ 0.301059] smpboot: Max logical packages: 1
[ 0.301114] smpboot: Total of 4 processors activated (23148.80 BogoMIPS)
[ 0.304212] devtmpfs: initialized
[ 0.304212] x86/mm: Memory block size: 128MB
[ 0.305805] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.305805] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.305805] pinctrl core: initialized pinctrl subsystem
[ 0.305805] NET: Registered protocol family 16
[ 0.305805] audit: initializing netlink subsys (disabled)
[ 0.305805] audit: type=2000 audit(1556781582.036:1): state=initialized audit_enabled=0 res=1
[ 0.305805] cpuidle: using governor ladder
[ 0.305805] cpuidle: using governor menu
[ 0.305805] ACPI: bus type PCI registered
[ 0.305805] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.305805] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.305805] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.305805] PCI: Using configuration type 1 for base access
[ 0.305805] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.309009] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.309018] ACPI: Added _OSI(Module Device)
[ 0.309059] ACPI: Added _OSI(Processor Device)
[ 0.309115] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.309172] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.309230] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.309285] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.309341] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.311363] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.312217] ACPI: EC: EC started
[ 0.312273] ACPI: EC: interrupt blocked
[ 0.312947] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.313004] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.313075] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.313144] ACPI: Interpreter enabled
[ 0.313212] ACPI: (supports S0 S3 S4 S5)
[ 0.313267] ACPI: Using IOAPIC for interrupt routing
[ 0.313337] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.313513] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.316468] ACPI: Power Resource [FPWR] (off)
[ 0.316761] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.316823] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.316927] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.316951] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.317065] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.317141] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])
[ 0.317347] PCI host bridge to bus 0000:00
[ 0.317404] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.317463] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.317523] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.317591] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.317661] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.317731] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.317800] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.317867] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.317935] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.318002] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.318072] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.318140] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.318209] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.318279] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.318348] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.318417] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.318486] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.318549] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.318623] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.318632] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[ 0.318636] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.318639] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.318699] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.318707] pci 0000:00:04.0: reg 0x10: [mem 0xe1b30000-0xe1b37fff 64bit]
[ 0.318789] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.318811] pci 0000:00:14.0: reg 0x10: [mem 0xe1b20000-0xe1b2ffff 64bit]
[ 0.318877] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.318942] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.318962] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff]
[ 0.318969] pci 0000:00:19.0: reg 0x14: [mem 0xe1b3c000-0xe1b3cfff]
[ 0.318977] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.319033] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.319091] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.319112] pci 0000:00:1a.0: reg 0x10: [mem 0xe1b3f000-0xe1b3f3ff]
[ 0.319190] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.319257] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.319278] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b38000-0xe1b3bfff 64bit]
[ 0.319347] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.319415] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[ 0.319555] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.319644] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[ 0.319803] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.319893] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.319914] pci 0000:00:1d.0: reg 0x10: [mem 0xe1b40000-0xe1b403ff]
[ 0.319993] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.320058] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.320213] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.320232] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.320240] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.320247] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.320255] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.320263] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.320270] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b3e000-0xe1b3e7ff]
[ 0.320312] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.320370] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.320388] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b41000-0xe1b410ff 64bit]
[ 0.320407] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.320475] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.320498] pci 0000:00:1f.6: reg 0x10: [mem 0xe1b3d000-0xe1b3dfff 64bit]
[ 0.320715] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000
[ 0.320782] pci 0000:01:00.0: reg 0x10: [mem 0xe1a00000-0xe1a07fff 64bit]
[ 0.320812] pci 0000:01:00.0: reg 0x18: [mem 0xe1800000-0xe19fffff 64bit]
[ 0.321018] pci 0000:01:00.0: supports D1 D2
[ 0.321019] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.321243] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.321306] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff]
[ 0.321447] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
[ 0.321485] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.321787] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff]
[ 0.322101] pci 0000:02:00.0: supports D1 D2
[ 0.322102] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322332] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.322394] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.322398] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.322405] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.322535] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.322630] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.322724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.322816] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.322909] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.323002] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.323093] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.323181] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.323779] ACPI: EC: interrupt unblocked
[ 0.323850] ACPI: EC: event unblocked
[ 0.323922] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.323991] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.324103] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.324103] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.324103] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.324103] vgaarb: loaded
[ 0.324103] pps_core: LinuxPPS API ver. 1 registered
[ 0.324103] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.324103] PTP clock support registered
[ 0.324103] EDAC MC: Ver: 3.0.0
[ 0.324103] PCI: Using ACPI for IRQ routing
[ 0.324103] PCI: pci_cache_line_size set to 64 bytes
[ 0.324103] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.324103] e820: reserve RAM buffer [mem 0x7ff23000-0x7fffffff]
[ 0.324103] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
[ 0.325318] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.325379] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.328946] clocksource: Switched to clocksource tsc-early
[ 0.337011] VFS: Disk quotas dquot_6.6.0
[ 0.337080] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.337221] AppArmor: AppArmor Filesystem Enabled
[ 0.337293] pnp: PnP ACPI init
[ 0.337472] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.337533] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.337591] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.337650] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.337708] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.337768] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.337827] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.337887] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.337946] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.338006] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.338068] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.338492] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.338555] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.338585] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.338644] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.338704] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.338719] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.338742] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.338759] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.338777] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.338793] pnp: PnP ACPI: found 7 devices
[ 0.344334] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.344436] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.344500] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff]
[ 0.344568] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.344626] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.344691] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.344754] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.344829] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.344830] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.344831] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.344832] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.344833] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.344834] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.344835] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 0.344835] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 0.344836] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
[ 0.344837] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 0.344838] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 0.344839] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
[ 0.344840] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
[ 0.344841] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
[ 0.344842] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window]
[ 0.344843] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[ 0.344844] pci_bus 0000:01: resource 1 [mem 0xe1800000-0xe1afffff]
[ 0.344845] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.344846] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.344846] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.344911] NET: Registered protocol family 2
[ 0.345102] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.345213] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.345451] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.345613] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.345702] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.345794] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.345914] NET: Registered protocol family 1
[ 0.345974] NET: Registered protocol family 44
[ 0.346037] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.346659] PCI: CLS 64 bytes, default 64
[ 0.346689] Unpacking initramfs...
[ 1.051771] Freeing initrd memory: 55096K
[ 1.064974] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.065048] software IO TLB: mapped [mem 0x7bf23000-0x7ff23000] (64MB)
[ 1.065666] Initialise system trusted keyrings
[ 1.065768] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.066839] zbud: loaded
[ 1.233466] Key type asymmetric registered
[ 1.233526] Asymmetric key parser 'x509' registered
[ 1.233594] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.233688] io scheduler mq-deadline registered
[ 1.234033] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 1.234285] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 1.234367] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.234558] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.234628] intel_idle: MWAIT substates: 0x21120
[ 1.234629] intel_idle: v0.4.1 model 0x3A
[ 1.234803] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.235309] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.235876] Linux agpgart interface v0.103
[ 1.235972] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.236031] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.236360] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.238163] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.238224] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.238392] mousedev: PS/2 mouse device common for all mice
[ 1.238485] rtc_cmos 00:03: RTC can wake from S4
[ 1.238689] rtc_cmos 00:03: registered as rtc0
[ 1.238758] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.238847] intel_pstate: Intel P-state driver initializing
[ 1.239073] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.239649] NET: Registered protocol family 10
[ 1.239913] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.255113] Segment Routing with IPv6
[ 1.255226] mip6: Mobile IPv6
[ 1.255292] NET: Registered protocol family 17
[ 1.255423] mpls_gso: MPLS GSO support
[ 1.255884] microcode: sig=0x306a9, pf=0x10, revision=0x20
[ 1.256096] microcode: Microcode Update Driver: v2.2.
[ 1.256120] sched_clock: Marking stable (1248743918, 7334617)->(1261307572, -5229037)
[ 1.258219] registered taskstats version 1
[ 1.258275] Loading compiled-in X.509 certificates
[ 1.289544] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.289626] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.289699] zswap: loaded using pool lzo/zbud
[ 1.289844] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.290173] rtc_cmos 00:03: setting system clock to 2019-05-02T07:19:43 UTC (1556781583)
[ 1.290858] Freeing unused kernel image memory: 1580K
[ 1.313061] Write protecting the kernel read-only data: 16384k
[ 1.314175] Freeing unused kernel image memory: 2036K
[ 1.314693] Freeing unused kernel image memory: 852K
[ 1.326911] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.326969] x86/mm: Checking user space page tables
[ 1.332171] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.332230] Run /init as init process
[ 1.441451] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input3
[ 1.441546] ACPI: Sleep Button [SLPB]
[ 1.441654] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input4
[ 1.441738] ACPI: Lid Switch [LID]
[ 1.441840] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 1.441921] ACPI: Power Button [PWRF]
[ 1.465357] sdhci: Secure Digital Host Controller Interface driver
[ 1.465454] sdhci: Copyright(c) Pierre Ossman
[ 1.465570] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.465631] ACPI: Thermal Zone [THM0] (52 C)
[ 1.466262] ACPI: bus type USB registered
[ 1.466433] usbcore: registered new interface driver usbfs
[ 1.466558] usbcore: registered new interface driver hub
[ 1.466700] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.466760] ACPI: Thermal Zone [THM1] (27 C)
[ 1.466918] usbcore: registered new device driver usb
[ 1.471044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.471739] ehci-pci: EHCI PCI platform driver
[ 1.471934] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.471997] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.472079] ehci-pci 0000:00:1a.0: debug port 2
[ 1.476036] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.476835] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.477928] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.477988] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.478291] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe1b3f000
[ 1.483092] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181213/utaddress-213)
[ 1.483190] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.486666] SCSI subsystem initialized
[ 1.488528] cryptd: max_cpu_qlen set to 1000
[ 1.491649] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213)
[ 1.491748] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.494744] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.494869] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.494941] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.495010] usb usb1: Product: EHCI Host Controller
[ 1.495068] usb usb1: Manufacturer: Linux 5.0.0-trunk-amd64 ehci_hcd
[ 1.495128] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.496408] libata version 3.00 loaded.
[ 1.496978] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 1.499824] ahci 0000:00:1f.2: version 3.0
[ 1.499962] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213)
[ 1.500057] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.500159] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213)
[ 1.500250] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.500322] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.500569] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.512026] AVX version of gcm_enc/dec engaged.
[ 1.512087] AES CTR mode by8 optimization enabled
[ 1.512115] hub 1-0:1.0: USB hub found
[ 1.512457] hub 1-0:1.0: 3 ports detected
[ 1.512684] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.512747] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.513875] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.513951] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.514337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.514409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.514478] usb usb2: Product: xHCI Host Controller
[ 1.514535] usb usb2: Manufacturer: Linux 5.0.0-trunk-amd64 xhci-hcd
[ 1.514595] usb usb2: SerialNumber: 0000:00:14.0
[ 1.514748] hub 2-0:1.0: USB hub found
[ 1.515036] hub 2-0:1.0: 4 ports detected
[ 1.515242] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.515304] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.515375] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.515706] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[ 1.515777] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.515846] usb usb3: Product: xHCI Host Controller
[ 1.515904] usb usb3: Manufacturer: Linux 5.0.0-trunk-amd64 xhci-hcd
[ 1.515964] usb usb3: SerialNumber: 0000:00:14.0
[ 1.516325] hub 3-0:1.0: USB hub found
[ 1.516639] hub 3-0:1.0: 4 ports detected
[ 1.517234] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.517503] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.518146] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.518209] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.518291] ehci-pci 0000:00:1d.0: debug port 2
[ 1.522239] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.523291] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1b40000
[ 1.524681] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.528452] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.534876] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.534951] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.537022] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.537133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 1.537360] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.537428] usb usb4: Product: EHCI Host Controller
[ 1.537486] usb usb4: Manufacturer: Linux 5.0.0-trunk-amd64 ehci_hcd
[ 1.537546] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.537719] hub 4-0:1.0: USB hub found
[ 1.537817] hub 4-0:1.0: 3 ports detected
[ 1.538502] scsi host0: ahci
[ 1.543706] scsi host1: ahci
[ 1.543877] scsi host2: ahci
[ 1.544022] scsi host3: ahci
[ 1.544157] scsi host4: ahci
[ 1.544287] scsi host5: ahci
[ 1.544396] ata1: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e100 irq 30
[ 1.544466] ata2: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e180 irq 30
[ 1.544536] ata3: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e200 irq 30
[ 1.544606] ata4: DUMMY
[ 1.544660] ata5: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e300 irq 30
[ 1.544729] ata6: DUMMY
[ 1.548497] [drm] Replacing VGA console driver
[ 1.549440] Console: switching to colour dummy device 80x25
[ 1.600956] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.600961] [drm] Driver supports precise vblank timestamp query.
[ 1.601303] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.650833] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[ 1.650860] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.650992] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.674122] acpi device:0d: registered as cooling_device5
[ 1.674216] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 1.775504] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66
[ 1.775509] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.775548] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.776280] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.859357] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.860221] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133
[ 1.860227] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.860412] ata1.00: configured for UDMA/133
[ 1.860612] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5
[ 1.864959] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 1.864973] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.876949] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.972372] fbcon: inteldrmfb (fb0) is primary device
[ 2.019308] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21
[ 2.019310] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.019311] usb 2-3: Product: USB2.0 Hub
[ 2.019311] usb 2-3: Manufacturer: VIA Labs, Inc.
[ 2.020293] hub 2-3:1.0: USB hub found
[ 2.021121] hub 2-3:1.0: 4 ports detected
[ 2.025385] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.025389] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.025813] hub 1-1:1.0: USB hub found
[ 2.025866] hub 1-1:1.0: 6 ports detected
[ 2.033833] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.033837] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.034327] hub 4-1:1.0: USB hub found
[ 2.034524] hub 4-1:1.0: 8 ports detected
[ 2.093008] tsc: Refined TSC clocksource calibration: 2893.432 MHz
[ 2.093033] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b506bc3f7, max_idle_ns: 440795308319 ns
[ 2.093083] clocksource: Switched to clocksource tsc
[ 2.176088] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.193775] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 2.201644] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.213589] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[ 2.213592] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.254903] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 2.254912] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.263447] ata2.00: configured for UDMA/133
[ 2.273048] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[ 2.294431] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.313053] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.333031] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.345676] usb 3-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21
[ 2.345680] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.345682] usb 3-3: Product: USB3.0 Hub
[ 2.345684] usb 3-3: Manufacturer: VIA Labs, Inc.
[ 2.348036] hub 3-3:1.0: USB hub found
[ 2.348283] hub 3-3:1.0: 4 ports detected
[ 2.422407] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 2.422411] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.422413] usb 1-1.3: Product: Biometric Coprocessor
[ 2.422415] usb 1-1.3: Manufacturer: Auth
[ 2.441819] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.441823] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.442333] hub 4-1.5:1.0: USB hub found
[ 2.442731] hub 4-1.5:1.0: 6 ports detected
[ 2.501027] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.587938] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.588333] ata3.00: supports DRM functions and may not be fully accessible
[ 2.588490] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133
[ 2.588493] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.589237] ata3.00: Trusted Computing capability qword not valid!
[ 2.589693] ata3.00: supports DRM functions and may not be fully accessible
[ 2.590552] ata3.00: Trusted Computing capability qword not valid!
[ 2.590559] ata3.00: configured for UDMA/133
[ 2.591150] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5
[ 2.617256] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 2.617260] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.617262] usb 1-1.4: Product: BCM20702A0
[ 2.617264] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.617266] usb 1-1.4: SerialNumber: B8763FA9D32E
[ 2.733037] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci
[ 2.754363] Console: switching to colour frame buffer device 200x67
[ 2.802387] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.850184] usb 4-1.5.1: New USB device found, idVendor=17ef, idProduct=604d, bcdDevice= 1.22
[ 2.852919] usb 4-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.855640] usb 4-1.5.1: Product: Lenovo USB Receiver
[ 2.863270] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.873544] usbcore: registered new interface driver usbhid
[ 2.874664] usbhid: USB HID core driver
[ 2.877816] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:17EF:604D.0001/input/input9
[ 2.904343] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.921460] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.922669] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 2.923188] sd 0:0:0:0: [sda] Write Protect is off
[ 2.924293] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 2.924295] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 2.924302] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.924303] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.924315] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.924494] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.925997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.926018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.927075] sdc: sdc1 sdc2 sdc3
[ 2.927075] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.927077] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.927089] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.929666] sda: sda1 sda2 < sda5 >
[ 2.930309] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.932269] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.935250] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.936957] usb 4-1.5.6: new high-speed USB device number 5 using ehci-pci
[ 2.937811] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input0
[ 2.945297] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:17EF:604D.0002/input/input10
[ 2.946463] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input1
[ 2.947766] input: Lenovo USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input11
[ 2.956905] sdb: sdb1
[ 2.958654] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.005010] input: Lenovo USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input12
[ 3.006331] input: Lenovo USB Receiver Keypad as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input13
[ 3.007703] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[ 3.053915] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 3.057094] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.060839] hub 4-1.5.6:1.0: USB hub found
[ 3.064294] hub 4-1.5.6:1.0: 4 ports detected
[ 3.132691] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[ 3.288950] raid6: sse2x4 gen() 14769 MB/s
[ 3.304974] usb 4-1.5.2: new full-speed USB device number 6 using ehci-pci
[ 3.356949] raid6: sse2x4 xor() 9768 MB/s
[ 3.424946] raid6: sse2x2 gen() 11925 MB/s
[ 3.431893] usb 4-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03
[ 3.433552] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.438052] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:04B4:4042.0004/input/input14
[ 3.492946] raid6: sse2x2 xor() 5254 MB/s
[ 3.498684] hid-generic 0003:04B4:4042.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0
[ 3.504404] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input15
[ 3.506322] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input16
[ 3.508953] usb 4-1.5.6.1: new high-speed USB device number 7 using ehci-pci
[ 3.560951] raid6: sse2x1 gen() 9909 MB/s
[ 3.564993] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input17
[ 3.566583] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input18
[ 3.568160] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input19
[ 3.569790] hid-generic 0003:04B4:4042.0005: input,hiddev1,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1
[ 3.617713] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 3.619047] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.620618] hub 4-1.5.6.1:1.0: USB hub found
[ 3.622650] hub 4-1.5.6.1:1.0: 4 ports detected
[ 3.628949] raid6: sse2x1 xor() 7409 MB/s
[ 3.630190] raid6: using algorithm sse2x4 gen() 14769 MB/s
[ 3.631433] raid6: .... xor() 9768 MB/s, rmw enabled
[ 3.632670] raid6: using ssse3x2 recovery algorithm
[ 3.634746] xor: automatically using best checksumming function avx
[ 3.636475] async_tx: api initialized (async)
[ 3.705055] usb 4-1.5.6.2: new high-speed USB device number 8 using ehci-pci
[ 3.800842] device-mapper: uevent: version 1.0.3
[ 3.802342] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 3.826655] usb 4-1.5.6.2: New USB device found, idVendor=0409, idProduct=0058, bcdDevice= 1.00
[ 3.829611] usb 4-1.5.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.831673] usb 4-1.5.6.2: Product: USB2.0 Hub Controller
[ 3.833748] usb 4-1.5.6.2: Manufacturer: NEC Corporation
[ 3.834125] hub 4-1.5.6.2:1.0: USB hub found
[ 3.839025] hub 4-1.5.6.2:1.0: 4 ports detected
[ 3.917059] usb 4-1.5.6.1.2: new full-speed USB device number 9 using ehci-pci
[ 4.036203] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02
[ 4.039787] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.042465] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller
[ 4.045120] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc.
[ 4.129065] usb 4-1.5.6.1.3: new full-speed USB device number 10 using ehci-pci
[ 4.243254] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00
[ 4.246845] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.250386] usb 4-1.5.6.1.3: Product: USB-Serial Controller D
[ 4.253927] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc.
[ 13.986698] NET: Registered protocol family 38
[ 14.115691] device-mapper: crypt: xts(aes) using implementation "xts-aes-aesni"
[ 14.447208] PM: Image not found (code -22)
[ 14.469922] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 14.469926] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 14.469931] PM: Marking nosave pages: [mem 0x7ff23000-0xffffffff]
[ 14.472566] PM: Basic memory bitmaps created
[ 14.473376] PM: Basic memory bitmaps freed
[ 14.474228] video LNXVIDEO:00: Restoring backlight state
[ 14.640803] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.858219] systemd[1]: Inserted module 'autofs4'
[ 14.877975] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 14.897232] systemd[1]: Detected architecture x86-64.
[ 14.905213] systemd[1]: Set hostname to <TP-T430s>.
[ 15.015291] systemd[1]: /lib/systemd/system/thinkfan.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly.
[ 15.022245] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 15.038700] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[ 15.065128] systemd[1]: Listening on LVM2 poll daemon socket.
[ 15.067514] systemd[1]: Created slice User and Session Slice.
[ 15.071033] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 15.075496] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 15.127153] loop: module loaded
[ 15.142444] lp: driver loaded but no devices found
[ 15.148341] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 15.150600] ppdev: user-space parallel port driver
[ 15.268424] systemd-journald[464]: Received request to flush runtime journal from PID 1
[ 15.435512] ACPI: AC Adapter [AC] (on-line)
[ 15.445945] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 15.448364] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 15.460288] Non-volatile memory driver v1.3
[ 15.480744] iTCO_vendor_support: vendor-support=0
[ 15.483677] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 15.485142] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 15.486510] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 15.487942] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.489988] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 15.491331] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 15.492651] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-1491-g4d6cfc82ed, EC G7HT39WW-3.22
[ 15.494039] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU
[ 15.498345] thinkpad_acpi: radio switch found; radios are enabled
[ 15.514471] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 15.515832] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 15.516802] wl: loading out-of-tree module taints kernel.
[ 15.517281] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 15.518646] wl: module license 'MIXED/Proprietary' taints kernel.
[ 15.521393] Disabling lock debugging due to kernel taint
[ 15.521773] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 15.524549] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 15.526744] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.527433] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 15.529637] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 15.532373] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 15.533910] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 15.538276] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 15.543590] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 15.543594] battery: new extension: ThinkPad Battery Extension
[ 15.546491] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input20
[ 15.550370] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 15.553508] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0
[ 15.554970] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 15.578192] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 15.579682] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.581204] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 15.582665] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 15.584171] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 15.584280] input: PC Speaker as /devices/platform/pcspkr/input/input21
[ 15.586703] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 15.588599] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 15.590189] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 15.605544] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 15.607052] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 15.608558] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 15.609811] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 15.613180] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 15.615942] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 15.617863] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[ 15.619145] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[ 15.620581] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[ 15.622085] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[ 15.623702] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[ 15.625086] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29
[ 15.715612] intel_rapl: Found RAPL domain package
[ 15.717187] intel_rapl: Found RAPL domain core
[ 15.718709] intel_rapl: Found RAPL domain uncore
[ 15.819544] wl 0000:01:00.0 wlp1s0: renamed from wlan0
[ 15.895088] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS
[ 15.972002] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 15.981367] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 16.108247] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.178872] audit: type=1400 audit(1556781598.382:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1075 comm="apparmor_parser"
[ 16.180320] audit: type=1400 audit(1556781598.382:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1075 comm="apparmor_parser"
[ 16.181823] audit: type=1400 audit(1556781598.382:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1075 comm="apparmor_parser"
[ 16.183291] audit: type=1400 audit(1556781598.386:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1077 comm="apparmor_parser"
[ 16.184759] audit: type=1400 audit(1556781598.386:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1074 comm="apparmor_parser"
[ 16.188318] audit: type=1400 audit(1556781598.390:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1089 comm="apparmor_parser"
[ 16.191175] audit: type=1400 audit(1556781598.394:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1088 comm="apparmor_parser"
[ 16.192636] audit: type=1400 audit(1556781598.394:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1088 comm="apparmor_parser"
[ 16.194098] audit: type=1400 audit(1556781598.394:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1093 comm="apparmor_parser"
[ 16.195555] audit: type=1400 audit(1556781598.398:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1095 comm="apparmor_parser"
[ 16.430563] Process accounting resumed
[ 17.658883] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 17.773970] Bluetooth: Core ver 2.22
[ 17.773997] NET: Registered protocol family 31
[ 17.773998] Bluetooth: HCI device and connection manager initialized
[ 17.774713] Bluetooth: HCI socket layer initialized
[ 17.774717] Bluetooth: L2CAP socket layer initialized
[ 17.774722] Bluetooth: SCO socket layer initialized
[ 17.787752] usbcore: registered new interface driver btusb
[ 17.854891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.854894] Bluetooth: BNEP filters: protocol multicast
[ 17.854899] Bluetooth: BNEP socket layer initialized
[ 17.899473] Bluetooth: hci0: BCM: chip id 63
[ 17.900481] Bluetooth: hci0: BCM: features 0x07
[ 17.916476] Bluetooth: hci0: TP-T430s
[ 17.920478] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[ 17.922566] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd
[ 18.811495] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[ 18.827499] Bluetooth: hci0: Broadcom Bluetooth Device
[ 19.406839] usblp 4-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[ 19.406872] usbcore: registered new interface driver usblp
[ 19.425447] usbcore: registered new interface driver usbserial_generic
[ 19.425458] usbserial: USB Serial support registered for generic
[ 19.428099] usbcore: registered new interface driver pl2303
[ 19.428115] usbserial: USB Serial support registered for pl2303
[ 19.428162] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected
[ 19.431776] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0
[ 19.643012] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 19.643060] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 19.795437] Bluetooth: RFCOMM TTY layer initialized
[ 19.795447] Bluetooth: RFCOMM socket layer initialized
[ 19.795454] Bluetooth: RFCOMM ver 1.11
[ 25.175060] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 25.793317] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1
[ 26.028744] vboxdrv: Found 4 processor cores
[ 26.049338] vboxdrv: TSC mode is Invariant, tentative frequency 2893429833 Hz
[ 26.049342] vboxdrv: Successfully loaded version 6.0.6_Debian (interface 0x00290008)
[ 26.059353] VBoxNetFlt: Successfully started.
[ 26.069351] VBoxNetAdp: Successfully started.
[ 26.080555] VBoxPciLinuxInit
[ 26.085361] vboxpci: IOMMU not found (not registered)
[ 26.398895] kauditd_printk_skb: 25 callbacks suppressed
[ 26.398896] audit: type=1400 audit(1556781608.602:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2733 comm="apparmor_parser"
[ 26.488863] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 26.491107] Bridge firewalling registered
[ 26.721547] Initializing XFRM netlink socket
[ 26.729253] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1
[ 27.828109] audit: type=1400 audit(1556781610.030:38): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=1414 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 27.828152] audit: type=1400 audit(1556781610.030:39): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=1414 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 28.807674] fuse init (API version 7.28)
[ 29.777072] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 29.893182] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 29.893188] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 29.893191] usb 1-1.6: Product: Integrated Camera
[ 29.893193] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 30.464526] media: Linux media interface: v0.10
[ 30.477272] videodev: Linux video capture interface: v2.00
[ 30.491869] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 30.498494] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 30.498497] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 30.498499] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 30.498501] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 30.498558] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input30
[ 30.498613] usbcore: registered new interface driver uvcvideo
[ 30.498614] USB Video Class driver (1.1.1)
[ 32.001869] rfkill: input handler disabled
[ 32.072500] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 33.952968] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 34.071835] usb 1-1.6: USB disconnect, device number 5
[ 34.208976] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[ 34.324581] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 34.324585] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 34.324588] usb 1-1.6: Product: Integrated Camera
[ 34.324589] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 34.325586] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 34.331302] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 34.331307] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 34.331309] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 34.331312] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 34.331587] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input31
[ 38.657713] usb 1-1.6: USB disconnect, device number 6
[ 56.796987] usb 1-1.6: new high-speed USB device number 7 using ehci-pci
[ 56.912629] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 56.912633] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 56.912635] usb 1-1.6: Product: Integrated Camera
[ 56.912637] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 56.916640] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 56.922266] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 56.922270] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 56.922273] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 56.922275] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 56.922499] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input32
[ 60.352987] usb 1-1.6: reset high-speed USB device number 7 using ehci-pci
[ 60.467852] usb 1-1.6: USB disconnect, device number 7
[ 60.592976] usb 1-1.6: new high-speed USB device number 8 using ehci-pci
[ 60.708730] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 60.708734] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 60.708737] usb 1-1.6: Product: Integrated Camera
[ 60.708739] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 60.709747] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 60.715363] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 60.715369] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 60.715371] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 60.715374] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 60.715471] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input33
[ 65.160985] usb 1-1.6: reset high-speed USB device number 8 using ehci-pci
[ 68.321180] usb 1-1.6: USB disconnect, device number 8
[ 219.521005] usb 1-1.6: new high-speed USB device number 9 using ehci-pci
[ 219.636766] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 219.636773] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 219.636777] usb 1-1.6: Product: Integrated Camera
[ 219.636779] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 219.637891] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 219.643749] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 219.643756] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 219.643760] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 219.643763] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 219.643891] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input34
[ 223.053240] usb 1-1.6: USB disconnect, device number 9
[ 298.461003] usb 1-1.6: new high-speed USB device number 10 using ehci-pci
[ 298.576831] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 298.576839] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 298.576842] usb 1-1.6: Product: Integrated Camera
[ 298.576845] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 298.578086] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 298.583907] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 298.583913] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 298.583917] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 298.583920] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 298.584048] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input35