| [ 0.000000] Linux version 5.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191130 (Debian 9.2.1-21)) #1 SMP Debian 5.4.6-1 (2019-12-27) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff27fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff28000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.11-646-g99b075aa94 12/31/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.493 MHz processor |
| [ 0.002031] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002032] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002035] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.002039] MTRR default type: write-back |
| [ 0.002040] MTRR fixed ranges enabled: |
| [ 0.002041] 00000-9FFFF write-back |
| [ 0.002042] A0000-BFFFF uncachable |
| [ 0.002042] C0000-FFFFF write-back |
| [ 0.002043] MTRR variable ranges enabled: |
| [ 0.002044] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.002045] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002046] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002046] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002047] 4 disabled |
| [ 0.002047] 5 disabled |
| [ 0.002048] 6 disabled |
| [ 0.002048] 7 disabled |
| [ 0.002048] 8 disabled |
| [ 0.002049] 9 disabled |
| [ 0.002328] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002690] last_pfn = 0x7ff28 max_arch_pfn = 0x400000000 |
| [ 0.012090] BRK [0x30f001000, 0x30f001fff] PGTABLE |
| [ 0.012092] BRK [0x30f002000, 0x30f002fff] PGTABLE |
| [ 0.012093] BRK [0x30f003000, 0x30f003fff] PGTABLE |
| [ 0.012116] BRK [0x30f004000, 0x30f004fff] PGTABLE |
| [ 0.012118] BRK [0x30f005000, 0x30f005fff] PGTABLE |
| [ 0.012189] BRK [0x30f006000, 0x30f006fff] PGTABLE |
| [ 0.012209] BRK [0x30f007000, 0x30f007fff] PGTABLE |
| [ 0.012385] RAMDISK: [mem 0x30d7f000-0x346b6fff] |
| [ 0.012391] ACPI: Early table checksum verification disabled |
| [ 0.012394] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4) |
| [ 0.012397] ACPI: XSDT 0x000000007FF4E0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012402] ACPI: FACP 0x000000007FF51C40 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012407] ACPI: DSDT 0x000000007FF4E280 0039C0 (v02 COREv4 COREBOOT 20110725 INTL 20190703) |
| [ 0.012410] ACPI: FACS 0x000000007FF4E240 000040 |
| [ 0.012412] ACPI: FACS 0x000000007FF4E240 000040 |
| [ 0.012414] ACPI: SSDT 0x000000007FF51D40 001B03 (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.012417] ACPI: MCFG 0x000000007FF53850 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012419] ACPI: TCPA 0x000000007FF53890 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012422] ACPI: APIC 0x000000007FF538D0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012424] ACPI: DMAR 0x000000007FF53940 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012427] ACPI: HPET 0x000000007FF55A10 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012433] ACPI: Local APIC address 0xfee00000 |
| [ 0.012505] No NUMA configuration found |
| [ 0.012506] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.012509] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| [ 0.012539] Zone ranges: |
| [ 0.012540] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.012541] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.012542] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012543] Device empty |
| [ 0.012544] Movable zone start for each node |
| [ 0.012545] Early memory node ranges |
| [ 0.012546] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.012547] node 0: [mem 0x0000000000100000-0x000000007ff27fff] |
| [ 0.012548] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012558] Zeroed struct page in unavailable ranges: 314 pages |
| [ 0.012559] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.012560] On node 0 totalpages: 4175046 |
| [ 0.012561] DMA zone: 64 pages used for memmap |
| [ 0.012562] DMA zone: 21 pages reserved |
| [ 0.012563] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.012612] DMA32 zone: 8125 pages used for memmap |
| [ 0.012612] DMA32 zone: 519976 pages, LIFO batch:63 |
| [ 0.020740] Normal zone: 57048 pages used for memmap |
| [ 0.020742] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.060727] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.061064] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.061066] ACPI: Local APIC address 0xfee00000 |
| [ 0.061081] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.061083] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.061085] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.061087] ACPI: IRQ0 used by override. |
| [ 0.061087] ACPI: IRQ9 used by override. |
| [ 0.061089] Using ACPI (MADT) for SMP configuration information |
| [ 0.061090] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.061095] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.061104] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.061106] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.061106] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.061107] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.061109] PM: Registered nosave memory: [mem 0x7ff28000-0x829fffff] |
| [ 0.061109] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.061110] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.061111] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.061111] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.061112] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.061113] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.061113] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.061115] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.061116] Booting paravirtualized kernel on bare hardware |
| [ 0.061119] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.147791] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.147970] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u524288 |
| [ 0.147976] pcpu-alloc: s178584 r8192 d30312 u524288 alloc=1*2097152 |
| [ 0.147976] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.147996] Built 1 zonelists, mobility grouping on. Total pages: 4109788 |
| [ 0.147997] Policy zone: Normal |
| [ 0.147998] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.148789] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| [ 0.149165] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.149212] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.152214] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.152219] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.190604] Memory: 16263248K/16700184K available (10243K kernel code, 1196K rwdata, 3732K rodata, 1668K init, 2060K bss, 436936K reserved, 0K cma-reserved) |
| [ 0.190708] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.190719] Kernel/User page tables isolation: enabled |
| [ 0.190731] ftrace: allocating 33546 entries in 132 pages |
| [ 0.202036] rcu: Hierarchical RCU implementation. |
| [ 0.202038] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.202039] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.202040] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.204678] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.204887] random: crng done (trusting CPU's manufacturer) |
| [ 0.206455] Console: colour VGA+ 80x25 |
| [ 0.211988] printk: console [tty0] enabled |
| [ 0.212058] ACPI: Core revision 20190816 |
| [ 0.212175] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.212261] APIC: Switch to symmetric I/O mode setup |
| [ 0.212318] DMAR: Host address width 36 |
| [ 0.212374] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.212435] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.212504] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.212561] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.212620] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.212689] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.212748] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.212805] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.213261] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.213318] x2apic enabled |
| [ 0.213376] Switched APIC routing to cluster x2apic. |
| [ 0.213866] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.232261] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b5401175e, max_idle_ns: 440795243680 ns |
| [ 0.232337] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.98 BogoMIPS (lpj=11573972) |
| [ 0.232410] pid_max: default: 32768 minimum: 301 |
| [ 0.232489] LSM: Security Framework initializing |
| [ 0.232549] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.232623] AppArmor: AppArmor initialized |
| [ 0.232678] TOMOYO Linux initialized |
| [ 0.232770] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.232866] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.233149] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.233215] process: using mwait in idle threads |
| [ 0.233270] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.233326] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.233388] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.233458] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.233514] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.233583] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.233642] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.233712] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.233771] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.233846] MDS: Mitigation: Clear CPU buffers |
| [ 0.234052] Freeing SMP alternatives memory: 24K |
| [ 0.235695] TSC deadline timer enabled |
| [ 0.235697] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.235866] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.235944] ... version: 3 |
| [ 0.235999] ... bit width: 48 |
| [ 0.236053] ... generic registers: 4 |
| [ 0.236109] ... value mask: 0000ffffffffffff |
| [ 0.236166] ... max period: 00007fffffffffff |
| [ 0.236224] ... fixed-purpose events: 3 |
| [ 0.236280] ... event mask: 000000070000000f |
| [ 0.236334] rcu: Hierarchical SRCU implementation. |
| [ 0.236334] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.236334] smp: Bringing up secondary CPUs ... |
| [ 0.236334] x86: Booting SMP configuration: |
| [ 0.236334] .... node #0, CPUs: #1 |
| [ 0.236417] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.236580] #2 #3 |
| [ 0.242401] smp: Brought up 1 node, 4 CPUs |
| [ 0.242401] smpboot: Max logical packages: 1 |
| [ 0.242401] smpboot: Total of 4 processors activated (23147.94 BogoMIPS) |
| [ 0.242401] devtmpfs: initialized |
| [ 0.242401] x86/mm: Memory block size: 128MB |
| [ 0.245671] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.245671] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.245671] pinctrl core: initialized pinctrl subsystem |
| [ 0.245671] NET: Registered protocol family 16 |
| [ 0.245671] audit: initializing netlink subsys (disabled) |
| [ 0.245671] audit: type=2000 audit(1577808034.032:1): state=initialized audit_enabled=0 res=1 |
| [ 0.245671] cpuidle: using governor ladder |
| [ 0.245671] cpuidle: using governor menu |
| [ 0.245671] ACPI: bus type PCI registered |
| [ 0.245671] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.245949] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.246023] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.246089] PCI: Using configuration type 1 for base access |
| [ 0.246161] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.249077] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.396533] ACPI: Added _OSI(Module Device) |
| [ 0.396533] ACPI: Added _OSI(Processor Device) |
| [ 0.396533] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.396573] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.396630] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.396685] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.396743] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.398816] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.400779] ACPI: EC: EC started |
| [ 0.400835] ACPI: EC: interrupt blocked |
| [ 0.401197] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.401256] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.401323] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.401393] ACPI: Interpreter enabled |
| [ 0.401461] ACPI: (supports S0 S3 S4 S5) |
| [ 0.401516] ACPI: Using IOAPIC for interrupt routing |
| [ 0.401586] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.401765] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.404823] ACPI: Power Resource [FPWR] (off) |
| [ 0.405121] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.405182] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.405288] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.405368] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.405481] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.405559] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| [ 0.405766] PCI host bridge to bus 0000:00 |
| [ 0.405822] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.405879] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.405938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.406008] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.406077] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.406148] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.406218] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.406287] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.406357] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.406425] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.406493] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.406562] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.406631] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.406698] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.406766] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| [ 0.406836] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.406905] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.406969] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.407110] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.407178] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit] |
| [ 0.407242] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.407314] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] |
| [ 0.407444] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.407511] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit] |
| [ 0.407653] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.407732] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit] |
| [ 0.407855] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.407986] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.408064] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff] |
| [ 0.408127] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff] |
| [ 0.408192] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] |
| [ 0.408305] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.408399] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.408478] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff] |
| [ 0.408616] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.408746] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.408824] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit] |
| [ 0.408950] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.409083] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.409294] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.409381] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.409439] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.409575] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.409805] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.409891] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.409950] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.410088] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400 |
| [ 0.410321] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.410403] pci 0000:00:1c.2: Enabling MPC IRBNCE |
| [ 0.410461] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled |
| [ 0.410599] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.410677] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff] |
| [ 0.410815] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.410945] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.411168] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.411243] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087] |
| [ 0.411306] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093] |
| [ 0.411371] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f] |
| [ 0.411434] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097] |
| [ 0.411498] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] |
| [ 0.411562] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff] |
| [ 0.411660] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.411783] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.411858] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit] |
| [ 0.411934] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.412071] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.412151] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit] |
| [ 0.412428] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| [ 0.412578] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit] |
| [ 0.412694] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit] |
| [ 0.413000] pci 0000:01:00.0: supports D1 D2 |
| [ 0.413055] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.413385] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.413449] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.413704] pci 0000:02:00.0: [1180:e823] type 00 class 0x080500 |
| [ 0.413995] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.414296] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| [ 0.414860] pci 0000:02:00.0: supports D1 D2 |
| [ 0.414915] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.415570] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.415629] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.415691] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.415756] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.415898] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.415959] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.416022] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.416088] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.416309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416373] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416467] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416560] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416654] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416748] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416841] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416933] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.417681] ACPI: EC: interrupt unblocked |
| [ 0.417741] ACPI: EC: event unblocked |
| [ 0.417801] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.417868] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.417988] iommu: Default domain type: Translated |
| [ 0.418055] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.418055] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.418055] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.418055] vgaarb: loaded |
| [ 0.418055] EDAC MC: Ver: 3.0.0 |
| [ 0.418055] PCI: Using ACPI for IRQ routing |
| [ 0.418055] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.420599] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.420600] e820: reserve RAM buffer [mem 0x7ff28000-0x7fffffff] |
| [ 0.420601] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.421183] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.421244] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.423325] clocksource: Switched to clocksource tsc-early |
| [ 0.429333] VFS: Disk quotas dquot_6.6.0 |
| [ 0.429403] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.429558] AppArmor: AppArmor Filesystem Enabled |
| [ 0.429635] pnp: PnP ACPI init |
| [ 0.429819] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| [ 0.429930] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.429989] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.430049] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.430107] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.431372] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.431432] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.431492] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.431552] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.431613] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.431673] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.431736] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.432129] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.432191] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.432222] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.432279] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.432346] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.432362] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.432386] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.432405] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.432424] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.432441] pnp: PnP ACPI: found 7 devices |
| [ 0.433502] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.433503] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.433562] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.433619] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.438171] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.438333] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.438396] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.438467] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.438526] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.438590] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.438652] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.438727] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.438785] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.438847] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.438910] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.438984] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.439045] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.439102] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.439162] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.439221] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.439280] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.439340] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| [ 0.439400] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| [ 0.439459] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| [ 0.439518] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| [ 0.439578] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| [ 0.439638] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| [ 0.439697] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| [ 0.439756] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| [ 0.439816] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| [ 0.439876] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| [ 0.439936] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff] |
| [ 0.439996] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.440054] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.440114] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.440181] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| [ 0.440239] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff] |
| [ 0.440297] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.440432] NET: Registered protocol family 2 |
| [ 0.440625] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) |
| [ 0.440715] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| [ 0.440929] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.441099] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.441182] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.441269] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.441399] NET: Registered protocol family 1 |
| [ 0.441458] NET: Registered protocol family 44 |
| [ 0.441522] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.442295] PCI: CLS 64 bytes, default 64 |
| [ 0.442389] Trying to unpack rootfs image as initramfs... |
| [ 1.184773] Freeing initrd memory: 58592K |
| [ 1.184886] DMAR: No ATSR found |
| [ 1.184967] DMAR: dmar0: Using Queued invalidation |
| [ 1.185028] DMAR: dmar1: Using Queued invalidation |
| [ 1.254928] pci 0000:00:00.0: Adding to iommu group 0 |
| [ 1.257873] pci 0000:00:02.0: Adding to iommu group 1 |
| [ 1.258187] pci 0000:00:02.0: Using iommu direct mapping |
| [ 1.258272] pci 0000:00:04.0: Adding to iommu group 2 |
| [ 1.258364] pci 0000:00:14.0: Adding to iommu group 3 |
| [ 1.258451] pci 0000:00:19.0: Adding to iommu group 4 |
| [ 1.258544] pci 0000:00:1a.0: Adding to iommu group 5 |
| [ 1.258631] pci 0000:00:1b.0: Adding to iommu group 6 |
| [ 1.258725] pci 0000:00:1c.0: Adding to iommu group 7 |
| [ 1.258813] pci 0000:00:1c.1: Adding to iommu group 8 |
| [ 1.258906] pci 0000:00:1c.2: Adding to iommu group 9 |
| [ 1.259001] pci 0000:00:1d.0: Adding to iommu group 10 |
| [ 1.259098] pci 0000:00:1f.0: Adding to iommu group 11 |
| [ 1.259164] pci 0000:00:1f.2: Adding to iommu group 11 |
| [ 1.259230] pci 0000:00:1f.3: Adding to iommu group 11 |
| [ 1.259297] pci 0000:00:1f.6: Adding to iommu group 11 |
| [ 1.259390] pci 0000:01:00.0: Adding to iommu group 12 |
| [ 1.259635] pci 0000:02:00.0: Adding to iommu group 13 |
| [ 1.259697] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 1.261545] Initialise system trusted keyrings |
| [ 1.261611] Key type blacklist registered |
| [ 1.261703] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 1.262771] zbud: loaded |
| [ 1.263015] Platform Keyring initialized |
| [ 1.263074] Key type asymmetric registered |
| [ 1.263131] Asymmetric key parser 'x509' registered |
| [ 1.263194] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 1.263299] io scheduler mq-deadline registered |
| [ 1.263605] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| [ 1.263872] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| [ 1.263957] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.264278] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 |
| [ 1.264369] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.264572] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.264643] intel_idle: MWAIT substates: 0x21120 |
| [ 1.264643] intel_idle: v0.4.1 model 0x3A |
| [ 1.264805] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.266096] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.266156] ACPI: Thermal Zone [THM0] (54 C) |
| [ 1.266967] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.267027] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.267179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.267729] Linux agpgart interface v0.103 |
| [ 1.267826] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.267886] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.268157] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.269858] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.269920] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.270084] mousedev: PS/2 mouse device common for all mice |
| [ 1.270177] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.270398] rtc_cmos 00:03: registered as rtc0 |
| [ 1.270466] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.270554] intel_pstate: Intel P-state driver initializing |
| [ 1.270819] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.271065] drop_monitor: Initializing network drop monitor service |
| [ 1.271469] NET: Registered protocol family 10 |
| [ 1.271655] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.286856] Segment Routing with IPv6 |
| [ 1.286978] mip6: Mobile IPv6 |
| [ 1.287045] NET: Registered protocol family 17 |
| [ 1.287213] mpls_gso: MPLS GSO support |
| [ 1.287812] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.287941] microcode: Microcode Update Driver: v2.2. |
| [ 1.287946] IPI shorthand broadcast: enabled |
| [ 1.288098] sched_clock: Marking stable (1280253321, 7474184)->(1294801755, -7074250) |
| [ 1.288376] registered taskstats version 1 |
| [ 1.288445] Loading compiled-in X.509 certificates |
| [ 1.325623] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.325705] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.325779] zswap: loaded using pool lzo/zbud |
| [ 1.326060] Key type ._fscrypt registered |
| [ 1.326120] Key type .fscrypt registered |
| [ 1.326194] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.326601] rtc_cmos 00:03: setting system clock to 2019-12-31T16:00:35 UTC (1577808035) |
| [ 1.327764] Freeing unused kernel image memory: 1668K |
| [ 1.352375] Write protecting the kernel read-only data: 16384k |
| [ 1.353284] Freeing unused kernel image memory: 2036K |
| [ 1.353589] Freeing unused kernel image memory: 364K |
| [ 1.365277] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.365337] x86/mm: Checking user space page tables |
| [ 1.372580] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.372639] Run /init as init process |
| [ 1.488476] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2 |
| [ 1.488605] ACPI: Sleep Button [SLPB] |
| [ 1.488715] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3 |
| [ 1.488823] ACPI: Lid Switch [LID] |
| [ 1.488930] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 1.489036] ACPI: Power Button [PWRF] |
| [ 1.506242] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.506304] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.507840] PTP clock support registered |
| [ 1.518430] ACPI: bus type USB registered |
| [ 1.518511] usbcore: registered new interface driver usbfs |
| [ 1.518578] usbcore: registered new interface driver hub |
| [ 1.519818] usbcore: registered new device driver usb |
| [ 1.527789] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190816/utaddress-204) |
| [ 1.527887] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.527962] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204) |
| [ 1.528057] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.528130] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204) |
| [ 1.528224] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.528299] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204) |
| [ 1.528397] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.528472] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.530837] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.531908] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.532801] ehci-pci: EHCI PCI platform driver |
| [ 1.533031] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.533141] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.533264] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.533721] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.533812] sdhci: Copyright(c) Pierre Ossman |
| [ 1.537270] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.538215] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000 |
| [ 1.541730] SCSI subsystem initialized |
| [ 1.549923] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.549987] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.550204] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.550967] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 1.556510] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.556618] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.556689] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.556757] usb usb1: Product: EHCI Host Controller |
| [ 1.556814] usb usb1: Manufacturer: Linux 5.4.0-1-amd64 ehci_hcd |
| [ 1.556873] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.557244] hub 1-0:1.0: USB hub found |
| [ 1.557307] hub 1-0:1.0: 3 ports detected |
| [ 1.557568] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.557650] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.558803] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.558881] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.559088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.559159] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.559228] usb usb2: Product: xHCI Host Controller |
| [ 1.559286] usb usb2: Manufacturer: Linux 5.4.0-1-amd64 xhci-hcd |
| [ 1.559346] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.559505] hub 2-0:1.0: USB hub found |
| [ 1.559571] hub 2-0:1.0: 4 ports detected |
| [ 1.559793] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.559854] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.559926] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.560239] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.560327] cryptd: max_cpu_qlen set to 1000 |
| [ 1.561036] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 1.563488] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 1.564084] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.564426] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.567038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 |
| [ 1.567112] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.567181] usb usb3: Product: xHCI Host Controller |
| [ 1.567239] usb usb3: Manufacturer: Linux 5.4.0-1-amd64 xhci-hcd |
| [ 1.567298] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.574633] hub 3-0:1.0: USB hub found |
| [ 1.575465] hub 3-0:1.0: 4 ports detected |
| [ 1.576649] AVX version of gcm_enc/dec engaged. |
| [ 1.576718] AES CTR mode by8 optimization enabled |
| [ 1.577027] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 1.577110] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.578310] libata version 3.00 loaded. |
| [ 1.581090] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.581274] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000 |
| [ 1.582035] ahci 0000:00:1f.2: version 3.0 |
| [ 1.582209] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.582835] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.592453] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.592530] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.596403] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.596746] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.596819] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.596891] usb usb4: Product: EHCI Host Controller |
| [ 1.596951] usb usb4: Manufacturer: Linux 5.4.0-1-amd64 ehci_hcd |
| [ 1.597013] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 1.597204] hub 4-0:1.0: USB hub found |
| [ 1.597272] hub 4-0:1.0: 3 ports detected |
| [ 1.618865] scsi host0: ahci |
| [ 1.624407] scsi host1: ahci |
| [ 1.625039] scsi host2: ahci |
| [ 1.625224] scsi host3: ahci |
| [ 1.625388] scsi host4: ahci |
| [ 1.625544] scsi host5: ahci |
| [ 1.625664] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31 |
| [ 1.625740] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31 |
| [ 1.625814] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31 |
| [ 1.625887] ata4: DUMMY |
| [ 1.625945] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31 |
| [ 1.626018] ata6: DUMMY |
| [ 1.653205] i915 0000:00:02.0: VT-d active for gfx access |
| [ 1.653270] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 1.654200] Console: switching to colour dummy device 80x25 |
| [ 1.654255] i915 0000:00:02.0: DMAR active, disabling use of stolen memory |
| [ 1.678364] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.704400] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.704422] [drm] Driver supports precise vblank timestamp query. |
| [ 1.704919] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.756761] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 |
| [ 1.756883] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.780119] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| [ 1.780124] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.780164] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.780998] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| [ 1.789142] acpi device:0d: registered as cooling_device5 |
| [ 1.789205] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| [ 1.892346] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.892351] usb 2-3: new high-speed USB device number 2 using xhci_hcd |
| [ 1.932397] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.938819] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.939864] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| [ 1.939873] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 1.940058] ata1.00: configured for UDMA/133 |
| [ 1.940321] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| [ 2.042130] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| [ 2.042135] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.042139] usb 2-3: Product: USB2.0 Hub |
| [ 2.042141] usb 2-3: Manufacturer: VIA Labs, Inc. |
| [ 2.043050] hub 2-3:1.0: USB hub found |
| [ 2.043237] hub 2-3:1.0: 4 ports detected |
| [ 2.052710] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.052715] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.052858] hub 1-1:1.0: USB hub found |
| [ 2.052961] hub 1-1:1.0: 6 ports detected |
| [ 2.090966] fbcon: i915drmfb (fb0) is primary device |
| [ 2.093100] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.093103] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.093626] hub 4-1:1.0: USB hub found |
| [ 2.093808] hub 4-1:1.0: 8 ports detected |
| [ 2.229459] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 2.270856] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 2.292423] tsc: Refined TSC clocksource calibration: 2893.427 MHz |
| [ 2.292441] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502105a9, max_idle_ns: 440795323709 ns |
| [ 2.292488] clocksource: Switched to clocksource tsc |
| [ 2.312436] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.333631] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 2.333642] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.340426] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.373161] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| [ 2.373701] usb 3-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| [ 2.373706] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.373711] usb 3-3: Product: USB3.0 Hub |
| [ 2.373713] usb 3-3: Manufacturer: VIA Labs, Inc. |
| [ 2.376500] hub 3-3:1.0: USB hub found |
| [ 2.376780] hub 3-3:1.0: 4 ports detected |
| [ 2.384369] usb 4-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.449884] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.449889] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.449893] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.449895] usb 1-1.3: Manufacturer: Auth |
| [ 2.493300] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00 |
| [ 2.493307] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.494054] hub 4-1.5:1.0: USB hub found |
| [ 2.494381] hub 4-1.5:1.0: 6 ports detected |
| [ 2.528421] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.639558] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping |
| [ 2.639562] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping |
| [ 2.641007] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.641012] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.641016] usb 1-1.4: Product: BCM20702A0 |
| [ 2.641019] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.641022] usb 1-1.4: SerialNumber: B8763FA9D32E |
| [ 2.685641] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 2.685645] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 2.720428] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.735483] ata2.00: configured for UDMA/133 |
| [ 2.745005] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.784432] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci |
| [ 2.836861] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 2.836866] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.836870] usb 1-1.6: Product: Integrated Camera |
| [ 2.836873] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 2.893778] Console: switching to colour frame buffer device 240x67 |
| [ 2.897951] usb 4-1.5.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 |
| [ 2.897957] usb 4-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.897960] usb 4-1.5.1: Product: USB Receiver |
| [ 2.897963] usb 4-1.5.1: Manufacturer: Logitech |
| [ 2.911522] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.923825] usbcore: registered new interface driver usbhid |
| [ 2.925420] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 2.940315] usbhid: USB HID core driver |
| [ 2.943373] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:046D:C52B.0001/input/input8 |
| [ 2.980455] usb 4-1.5.3: new high-speed USB device number 5 using ehci-pci |
| [ 3.004862] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input0 |
| [ 3.008662] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input9 |
| [ 3.012362] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input10 |
| [ 3.023994] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.059697] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 3.063938] ata3.00: supports DRM functions and may not be fully accessible |
| [ 3.067512] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133 |
| [ 3.070882] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 3.074414] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input11 |
| [ 3.074953] ata3.00: Trusted Computing capability qword not valid! |
| [ 3.076281] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input1 |
| [ 3.078282] ata3.00: supports DRM functions and may not be fully accessible |
| [ 3.078445] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.084409] ata3.00: Trusted Computing capability qword not valid! |
| [ 3.084413] ata3.00: configured for UDMA/133 |
| [ 3.086728] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 |
| [ 3.089998] usb 4-1.5.3: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.092554] usb 4-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.095477] hub 4-1.5.3:1.0: USB hub found |
| [ 3.097109] hub 4-1.5.3:1.0: 3 ports detected |
| [ 3.180430] usb 4-1.5.6: new high-speed USB device number 6 using ehci-pci |
| [ 3.198768] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.231567] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 |
| [ 3.293593] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.297234] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.301532] hub 4-1.5.6:1.0: USB hub found |
| [ 3.307307] hub 4-1.5.6:1.0: 4 ports detected |
| [ 3.324836] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input13 |
| [ 3.329397] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.0-1.5.1/input2:1 |
| [ 3.391920] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input17 |
| [ 3.392409] usb 4-1.5.3.3: new full-speed USB device number 7 using ehci-pci |
| [ 3.395975] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.5.1/input2:1 |
| [ 3.405235] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 3.430097] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 3.430117] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| [ 3.431146] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 3.431150] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| [ 3.431159] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 3.431160] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 3.431175] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.432616] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 3.435044] sd 0:0:0:0: [sda] Write Protect is off |
| [ 3.437642] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 3.439199] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.441467] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 3.443439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.444881] sdc: sdc1 sdc2 sdc3 |
| [ 3.445361] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 3.445925] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.461734] sda: sda1 sda2 < sda5 > |
| [ 3.463753] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.499209] sdb: sdb1 |
| [ 3.501113] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 3.516419] usb 4-1.5.3.3: device descriptor read/64, error -32 |
| [ 3.860260] usb 4-1.5.3.3: New USB device found, idVendor=056d, idProduct=0002, bcdDevice=75.30 |
| [ 3.860343] raid6: sse2x4 gen() 13467 MB/s |
| [ 3.861929] usb 4-1.5.3.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 |
| [ 3.865226] usb 4-1.5.3.3: Product: EIZO USB HID Monitor |
| [ 3.866867] usb 4-1.5.3.3: Manufacturer: EIZO |
| [ 3.900348] usb 4-1.5.2: new full-speed USB device number 8 using ehci-pci |
| [ 3.928341] raid6: sse2x4 xor() 8426 MB/s |
| [ 3.996340] raid6: sse2x2 gen() 9156 MB/s |
| [ 4.011697] usb 4-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| [ 4.013362] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 4.019936] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:04B4:4042.0005/input/input18 |
| [ 4.064339] raid6: sse2x2 xor() 8494 MB/s |
| [ 4.081630] hid-generic 0003:04B4:4042.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0 |
| [ 4.088348] usb 4-1.5.6.1: new high-speed USB device number 9 using ehci-pci |
| [ 4.091412] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input19 |
| [ 4.093689] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input20 |
| [ 4.132347] raid6: sse2x1 gen() 10585 MB/s |
| [ 4.152388] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input21 |
| [ 4.154605] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input22 |
| [ 4.156778] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input23 |
| [ 4.158985] hid-generic 0003:04B4:4042.0006: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1 |
| [ 4.170694] hid-generic 0003:056D:0002.0007: hiddev2,hidraw4: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.0-1.5.3.3/input0 |
| [ 4.197174] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 4.198931] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 4.200342] raid6: sse2x1 xor() 7219 MB/s |
| [ 4.201059] hub 4-1.5.6.1:1.0: USB hub found |
| [ 4.203205] raid6: using algorithm sse2x4 gen() 13467 MB/s |
| [ 4.205298] hub 4-1.5.6.1:1.0: 4 ports detected |
| [ 4.206674] raid6: .... xor() 8426 MB/s, rmw enabled |
| [ 4.210220] raid6: using ssse3x2 recovery algorithm |
| [ 4.213219] xor: automatically using best checksumming function avx |
| [ 4.215679] async_tx: api initialized (async) |
| [ 4.396114] device-mapper: uevent: version 1.0.3 |
| [ 4.397934] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com |
| [ 4.496483] usb 4-1.5.6.1.2: new full-speed USB device number 10 using ehci-pci |
| [ 4.615498] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| [ 4.619459] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.621804] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller |
| [ 4.624092] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc. |
| [ 4.724433] usb 4-1.5.6.1.3: new full-speed USB device number 11 using ehci-pci |
| [ 4.838193] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| [ 4.841880] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.845498] usb 4-1.5.6.1.3: Product: USB-Serial Controller D |
| [ 4.849112] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc. |
| [ 12.669513] PM: Image not found (code -22) |
| [ 12.675632] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| [ 12.675635] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| [ 12.675640] PM: Marking nosave pages: [mem 0x7ff28000-0xffffffff] |
| [ 12.678328] PM: Basic memory bitmaps created |
| [ 12.679468] PM: Basic memory bitmaps freed |
| [ 12.680289] video LNXVIDEO:00: Restoring backlight state |
| [ 12.797096] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 12.861766] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 13.055335] systemd[1]: Inserted module 'autofs4' |
| [ 13.082548] systemd[1]: systemd 244-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 13.104632] systemd[1]: Detected architecture x86-64. |
| [ 13.128809] systemd[1]: Set hostname to <TP-T430s>. |
| [ 13.256556] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| [ 13.296927] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 13.300434] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| [ 13.322882] systemd[1]: /lib/systemd/system/fancontrol.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| [ 13.326056] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. |
| [ 13.334130] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. |
| [ 13.357844] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly. |
| [ 13.368286] systemd[1]: Created slice system-getty.slice. |
| [ 13.370499] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. |
| [ 13.375653] systemd[1]: Created slice system-systemd\x2dfsck.slice. |
| [ 13.382418] systemd[1]: Created slice system-tor.slice. |
| [ 13.386844] systemd[1]: Created slice User and Session Slice. |
| [ 13.390924] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 13.395322] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 13.399042] systemd[1]: Reached target User and Group Name Lookups. |
| [ 13.400752] systemd[1]: Reached target Remote File Systems. |
| [ 13.404570] systemd[1]: Reached target Slices. |
| [ 13.406348] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 13.410212] systemd[1]: Listening on LVM2 poll daemon socket. |
| [ 13.414403] systemd[1]: Listening on Syslog Socket. |
| [ 13.417939] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 13.421777] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 13.425732] systemd[1]: Listening on Journal Audit Socket. |
| [ 13.429502] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 13.433300] systemd[1]: Listening on Journal Socket. |
| [ 13.437121] systemd[1]: Listening on udev Control Socket. |
| [ 13.440870] systemd[1]: Listening on udev Kernel Socket. |
| [ 13.445424] systemd[1]: Mounting Huge Pages File System... |
| [ 13.449336] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 13.453209] systemd[1]: Mounting Kernel Debug File System... |
| [ 13.457106] systemd[1]: Starting Availability of block devices... |
| [ 13.461170] systemd[1]: Starting Set the console keyboard layout... |
| [ 13.465083] systemd[1]: Starting Create list of static device nodes for the current kernel... |
| [ 13.469214] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... |
| [ 13.474303] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. |
| [ 13.474338] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. |
| [ 13.475581] systemd[1]: Starting Journal Service... |
| [ 13.483840] systemd[1]: Starting Load Kernel Modules... |
| [ 13.488572] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 13.494318] systemd[1]: Starting udev Coldplug all Devices... |
| [ 13.499692] systemd[1]: Mounted Huge Pages File System. |
| [ 13.503224] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 13.504540] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 13.510452] systemd[1]: Mounted Kernel Debug File System. |
| [ 13.515085] systemd[1]: Started Availability of block devices. |
| [ 13.520771] systemd[1]: Started Set the console keyboard layout. |
| [ 13.524176] systemd[1]: Started Create list of static device nodes for the current kernel. |
| [ 13.527728] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 13.532072] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. |
| [ 13.533272] systemd[1]: Starting Load/Save Random Seed... |
| [ 13.539826] systemd[1]: Starting Create System Users... |
| [ 13.550133] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. |
| [ 13.561617] systemd[1]: Started Load/Save Random Seed. |
| [ 13.571374] systemd[1]: Started Create System Users. |
| [ 13.574188] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 13.602802] systemd[1]: Started Create Static Device Nodes in /dev. |
| [ 13.605281] systemd[1]: Reached target Local File Systems (Pre). |
| [ 13.613272] systemd[1]: Mounting Mount unit for core18, revision 1279... |
| [ 13.618303] systemd[1]: Mounting Mount unit for core18, revision 1288... |
| [ 13.620923] systemd[1]: Mounting Mount unit for sdlpop, revision 211... |
| [ 13.625581] systemd[1]: Mounting Mount unit for snapd, revision 5643... |
| [ 13.631091] systemd[1]: Mounting Mount unit for snapd, revision 5754... |
| [ 13.634506] systemd[1]: Starting udev Kernel Device Manager... |
| [ 13.638071] systemd[1]: Started udev Coldplug all Devices. |
| [ 13.642721] systemd[1]: Starting Helper to synchronize boot up for ifupdown... |
| [ 13.651011] systemd[1]: Started Helper to synchronize boot up for ifupdown. |
| [ 13.652602] loop: module loaded |
| [ 13.666298] lp: driver loaded but no devices found |
| [ 13.670572] ppdev: user-space parallel port driver |
| [ 13.678110] systemd[1]: Started Load Kernel Modules. |
| [ 13.680224] systemd[1]: Condition check resulted in FUSE Control File System being skipped. |
| [ 13.680331] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. |
| [ 13.681554] systemd[1]: Starting Apply Kernel Variables... |
| [ 13.692408] systemd[1]: Started Apply Kernel Variables. |
| [ 13.696444] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| [ 13.720985] systemd[1]: Mounted Mount unit for sdlpop, revision 211. |
| [ 13.736764] systemd[1]: Mounted Mount unit for core18, revision 1279. |
| [ 13.741349] systemd[1]: Mounted Mount unit for core18, revision 1288. |
| [ 13.752739] systemd[1]: Mounted Mount unit for snapd, revision 5754. |
| [ 13.759284] systemd[1]: Mounted Mount unit for snapd, revision 5643. |
| [ 13.790215] systemd[1]: Started udev Kernel Device Manager. |
| [ 13.793641] systemd[1]: Starting Show Plymouth Boot Screen... |
| [ 13.816047] systemd[1]: plymouth-start.service: Succeeded. |
| [ 13.818612] systemd[1]: Started Show Plymouth Boot Screen. |
| [ 13.820841] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. |
| [ 13.820960] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. |
| [ 13.939571] systemd[1]: Started Journal Service. |
| [ 13.952189] systemd-journald[498]: Received client request to flush runtime journal. |
| [ 13.966078] ACPI: AC Adapter [AC] (on-line) |
| [ 14.054374] Non-volatile memory driver v1.3 |
| [ 14.086925] iTCO_vendor_support: vendor-support=0 |
| [ 14.115694] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 14.121861] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 14.123774] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 14.125689] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-646-g99b075aa94, EC G7HT39WW-3.22 |
| [ 14.127662] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| [ 14.129625] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 14.132066] thinkpad_acpi: radio switch found; radios are enabled |
| [ 14.132183] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 14.132195] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 14.132196] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 14.133963] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 14.138094] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 14.139010] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 14.156865] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 14.158943] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 14.162504] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 14.162509] battery: new extension: ThinkPad Battery Extension |
| [ 14.169130] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input24 |
| [ 14.181592] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 14.189232] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 14.191639] input: PC Speaker as /devices/platform/pcspkr/input/input25 |
| [ 14.193845] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 14.196214] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 14.198190] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 14.198317] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 14.200156] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 14.204193] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 14.253135] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 14.318103] wl: loading out-of-tree module taints kernel. |
| [ 14.320088] wl: module license 'MIXED/Proprietary' taints kernel. |
| [ 14.322049] Disabling lock debugging due to kernel taint |
| [ 14.331757] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 14.333867] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 14.336131] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 14.336660] wl: module verification failed: signature and/or required key missing - tainting kernel |
| [ 14.338282] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 14.342366] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 14.349029] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 14.351095] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 14.353089] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 14.386864] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 |
| [ 14.388977] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 |
| [ 14.391372] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 |
| [ 14.393493] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 |
| [ 14.397118] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30 |
| [ 14.399160] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31 |
| [ 14.402467] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32 |
| [ 14.406276] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33 |
| [ 14.456629] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| |
| [ 14.539381] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| [ 14.633112] intel_rapl_common: Found RAPL domain package |
| [ 14.634992] intel_rapl_common: Found RAPL domain core |
| [ 14.640582] intel_rapl_common: Found RAPL domain uncore |
| [ 14.642517] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 14.853916] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 14.858050] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 14.859656] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) |
| [ 15.064600] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 15.120951] audit: type=1400 audit(1577808049.289:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1265 comm="apparmor_parser" |
| [ 15.122860] audit: type=1400 audit(1577808049.289:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1265 comm="apparmor_parser" |
| [ 15.124664] audit: type=1400 audit(1577808049.289:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1265 comm="apparmor_parser" |
| [ 15.126480] audit: type=1400 audit(1577808049.289:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1267 comm="apparmor_parser" |
| [ 15.128434] audit: type=1400 audit(1577808049.297:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1270 comm="apparmor_parser" |
| [ 15.130645] audit: type=1400 audit(1577808049.297:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1269 comm="apparmor_parser" |
| [ 15.133449] audit: type=1400 audit(1577808049.297:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1269 comm="apparmor_parser" |
| [ 15.135672] audit: type=1400 audit(1577808049.297:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1272 comm="apparmor_parser" |
| [ 15.137824] audit: type=1400 audit(1577808049.305:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1264 comm="apparmor_parser" |
| [ 15.139913] audit: type=1400 audit(1577808049.305:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1273 comm="apparmor_parser" |
| [ 15.247368] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input34 |
| [ 15.387198] Process accounting resumed |
| [ 16.376753] vboxdrv: Found 4 processor cores |
| [ 16.414352] vboxdrv: TSC mode is Invariant, tentative frequency 2893426288 Hz |
| [ 16.415864] vboxdrv: Successfully loaded version 6.1.0_Debian (interface 0x002d0001) |
| [ 16.634891] VBoxNetFlt: Successfully started. |
| [ 16.645037] VBoxNetAdp: Successfully started. |
| [ 16.824425] mc: Linux media interface: v0.10 |
| [ 16.847703] videodev: Linux video capture interface: v2.00 |
| [ 16.989663] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 17.044476] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 17.055909] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 17.057668] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 17.059647] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 17.061162] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 17.068522] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input35 |
| [ 17.070792] Bluetooth: Core ver 2.22 |
| [ 17.072254] NET: Registered protocol family 31 |
| [ 17.072602] usbcore: registered new interface driver uvcvideo |
| [ 17.073740] Bluetooth: HCI device and connection manager initialized |
| [ 17.074676] USB Video Class driver (1.1.1) |
| [ 17.078184] Bluetooth: HCI socket layer initialized |
| [ 17.079622] Bluetooth: L2CAP socket layer initialized |
| [ 17.083103] Bluetooth: SCO socket layer initialized |
| [ 17.116523] usbcore: registered new interface driver btusb |
| [ 17.199335] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 17.201115] Bluetooth: BNEP filters: protocol multicast |
| [ 17.202855] Bluetooth: BNEP socket layer initialized |
| [ 17.234487] Bluetooth: hci0: BCM: chip id 63 |
| [ 17.237491] Bluetooth: hci0: BCM: features 0x07 |
| [ 17.255500] Bluetooth: hci0: BCM20702A |
| [ 17.257493] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 17.264380] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 18.242478] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 18.258488] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 18.332229] Bluetooth: RFCOMM TTY layer initialized |
| [ 18.332237] Bluetooth: RFCOMM socket layer initialized |
| [ 18.332243] Bluetooth: RFCOMM ver 1.11 |
| [ 19.025626] usblp 4-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 19.025821] usbcore: registered new interface driver usblp |
| [ 19.050587] usbcore: registered new interface driver usbserial_generic |
| [ 19.050602] usbserial: USB Serial support registered for generic |
| [ 19.056692] usbcore: registered new interface driver pl2303 |
| [ 19.056707] usbserial: USB Serial support registered for pl2303 |
| [ 19.056747] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 19.062027] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 21.181253] rfkill: input handler disabled |
| [ 21.301534] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected. |
| [ 22.659991] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 22.660049] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| [ 27.502398] rfkill: input handler enabled |
| [ 28.526195] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 31.201380] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 32.893450] kauditd_printk_skb: 32 callbacks suppressed |
| [ 32.893452] audit: type=1400 audit(1577808067.061:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3442 comm="apparmor_parser" |
| [ 33.143646] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 33.148845] Bridge firewalling registered |
| [ 33.370980] Initializing XFRM netlink socket |
| [ 34.013010] rfkill: input handler disabled |