blob: e8865ece1763b2f375bd4e4fb6c1990a4fbea4e6 [file] [log] [blame]
[ 0.000000] Linux version 5.2.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-21)) #1 SMP Debian 5.2.9-2 (2019-08-21)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.2.0-2-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff22fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff23000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.10-759-g52b1e2814a 09/24/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.490 MHz processor
[ 0.001911] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001912] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001915] last_pfn = 0x47b600 max_arch_pfn = 0x400000000
[ 0.001919] MTRR default type: write-back
[ 0.001920] MTRR fixed ranges enabled:
[ 0.001921] 00000-9FFFF write-back
[ 0.001922] A0000-BFFFF uncachable
[ 0.001923] C0000-FFFFF write-back
[ 0.001923] MTRR variable ranges enabled:
[ 0.001924] 0 base 080000000 mask FC0000000 uncachable
[ 0.001925] 1 base 0C0000000 mask FF0000000 uncachable
[ 0.001926] 2 base 0D0000000 mask FF0000000 write-combining
[ 0.001927] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.001927] 4 disabled
[ 0.001927] 5 disabled
[ 0.001928] 6 disabled
[ 0.001928] 7 disabled
[ 0.001928] 8 disabled
[ 0.001929] 9 disabled
[ 0.002682] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003033] last_pfn = 0x7ff23 max_arch_pfn = 0x400000000
[ 0.012481] BRK [0x3e9801000, 0x3e9801fff] PGTABLE
[ 0.012483] BRK [0x3e9802000, 0x3e9802fff] PGTABLE
[ 0.012484] BRK [0x3e9803000, 0x3e9803fff] PGTABLE
[ 0.012506] BRK [0x3e9804000, 0x3e9804fff] PGTABLE
[ 0.012507] BRK [0x3e9805000, 0x3e9805fff] PGTABLE
[ 0.012574] BRK [0x3e9806000, 0x3e9806fff] PGTABLE
[ 0.012592] BRK [0x3e9807000, 0x3e9807fff] PGTABLE
[ 0.012766] RAMDISK: [mem 0x310f9000-0x34873fff]
[ 0.012772] ACPI: Early table checksum verification disabled
[ 0.012826] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[ 0.012830] ACPI: XSDT 0x000000007FF490E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012835] ACPI: FACP 0x000000007FF4CBC0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012839] ACPI: DSDT 0x000000007FF49280 003937 (v02 COREv4 COREBOOT 20110725 INTL 20190703)
[ 0.012842] ACPI: FACS 0x000000007FF49240 000040
[ 0.012844] ACPI: FACS 0x000000007FF49240 000040
[ 0.012846] ACPI: SSDT 0x000000007FF4CCC0 001B03 (v02 COREv4 COREBOOT 0000002A CORE 20190703)
[ 0.012848] ACPI: MCFG 0x000000007FF4E7D0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012851] ACPI: TCPA 0x000000007FF4E810 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012853] ACPI: APIC 0x000000007FF4E850 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012856] ACPI: DMAR 0x000000007FF4E8C0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012858] ACPI: HPET 0x000000007FF50990 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012865] ACPI: Local APIC address 0xfee00000
[ 0.012937] No NUMA configuration found
[ 0.012938] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
[ 0.012942] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff]
[ 0.012971] Zone ranges:
[ 0.012972] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012973] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012974] Normal [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.012975] Device empty
[ 0.012976] Movable zone start for each node
[ 0.012977] Early memory node ranges
[ 0.012978] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.012979] node 0: [mem 0x0000000000100000-0x000000007ff22fff]
[ 0.012979] node 0: [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.012987] Zeroed struct page in unavailable ranges: 319 pages
[ 0.012988] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
[ 0.012990] On node 0 totalpages: 4175041
[ 0.012991] DMA zone: 64 pages used for memmap
[ 0.012992] DMA zone: 21 pages reserved
[ 0.012992] DMA zone: 3998 pages, LIFO batch:0
[ 0.013040] DMA32 zone: 8125 pages used for memmap
[ 0.013040] DMA32 zone: 519971 pages, LIFO batch:63
[ 0.020423] Normal zone: 57048 pages used for memmap
[ 0.020424] Normal zone: 3651072 pages, LIFO batch:63
[ 0.057843] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.058147] ACPI: PM-Timer IO Port: 0x508
[ 0.058149] ACPI: Local APIC address 0xfee00000
[ 0.058165] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.058167] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.058169] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.058171] ACPI: IRQ0 used by override.
[ 0.058172] ACPI: IRQ9 used by override.
[ 0.058173] Using ACPI (MADT) for SMP configuration information
[ 0.058174] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.058179] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.058188] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.058190] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.058191] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.058191] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.058193] PM: Registered nosave memory: [mem 0x7ff23000-0x829fffff]
[ 0.058193] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.058194] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.058195] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.058196] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.058196] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.058197] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.058198] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.058199] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.058200] Booting paravirtualized kernel on bare hardware
[ 0.058204] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.141698] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.141880] percpu: Embedded 53 pages/cpu s176984 r8192 d31912 u524288
[ 0.141888] pcpu-alloc: s176984 r8192 d31912 u524288 alloc=1*2097152
[ 0.141888] pcpu-alloc: [0] 0 1 2 3
[ 0.141905] Built 1 zonelists, mobility grouping on. Total pages: 4109783
[ 0.141905] Policy zone: Normal
[ 0.141907] Kernel command line: BOOT_IMAGE=/vmlinuz-5.2.0-2-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.144981] Calgary: detecting Calgary via BIOS EBDA area
[ 0.144986] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.183511] Memory: 16289468K/16700164K available (10243K kernel code, 1186K rwdata, 3516K rodata, 1640K init, 2168K bss, 410696K reserved, 0K cma-reserved)
[ 0.183613] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.183622] Kernel/User page tables isolation: enabled
[ 0.183635] ftrace: allocating 32784 entries in 129 pages
[ 0.194517] rcu: Hierarchical RCU implementation.
[ 0.194520] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.194521] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.194522] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.197525] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.197734] random: crng done (trusting CPU's manufacturer)
[ 0.199306] Console: colour VGA+ 80x25
[ 0.204621] printk: console [tty0] enabled
[ 0.204690] ACPI: Core revision 20190509
[ 0.204876] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.204956] hpet clockevent registered
[ 0.204961] APIC: Switch to symmetric I/O mode setup
[ 0.205019] DMAR: Host address width 36
[ 0.205075] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.205135] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.205206] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.205264] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.205323] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.205394] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.205451] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.205508] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.205964] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.206022] x2apic enabled
[ 0.206081] Switched APIC routing to cluster x2apic.
[ 0.206571] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.224960] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b53d85208, max_idle_ns: 440795345259 ns
[ 0.225036] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.98 BogoMIPS (lpj=11573960)
[ 0.225112] pid_max: default: 32768 minimum: 301
[ 0.225188] LSM: Security Framework initializing
[ 0.225248] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.225324] AppArmor: AppArmor initialized
[ 0.225377] TOMOYO Linux initialized
[ 0.227540] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.228684] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.228800] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.228891] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.229255] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.229318] process: using mwait in idle threads
[ 0.229377] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.229433] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.229492] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.229563] Spectre V2 : Mitigation: Full generic retpoline
[ 0.229621] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.229691] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.229751] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.229821] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.229880] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.229953] MDS: Mitigation: Clear CPU buffers
[ 0.230155] Freeing SMP alternatives memory: 24K
[ 0.231790] TSC deadline timer enabled
[ 0.231793] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.231967] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.232047] ... version: 3
[ 0.232103] ... bit width: 48
[ 0.232158] ... generic registers: 4
[ 0.232212] ... value mask: 0000ffffffffffff
[ 0.232270] ... max period: 00007fffffffffff
[ 0.232325] ... fixed-purpose events: 3
[ 0.232381] ... event mask: 000000070000000f
[ 0.232471] rcu: Hierarchical SRCU implementation.
[ 0.232986] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.233034] smp: Bringing up secondary CPUs ...
[ 0.233034] x86: Booting SMP configuration:
[ 0.233034] .... node #0, CPUs: #1
[ 0.233158] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.233299] #2 #3
[ 0.237085] smp: Brought up 1 node, 4 CPUs
[ 0.237150] smpboot: Max logical packages: 1
[ 0.237205] smpboot: Total of 4 processors activated (23147.92 BogoMIPS)
[ 0.240302] devtmpfs: initialized
[ 0.240302] x86/mm: Memory block size: 128MB
[ 0.241908] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.241908] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.241908] pinctrl core: initialized pinctrl subsystem
[ 0.241908] NET: Registered protocol family 16
[ 0.241908] audit: initializing netlink subsys (disabled)
[ 0.241908] audit: type=2000 audit(1569365006.036:1): state=initialized audit_enabled=0 res=1
[ 0.241908] cpuidle: using governor ladder
[ 0.241908] cpuidle: using governor menu
[ 0.241908] ACPI: bus type PCI registered
[ 0.241908] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.241908] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.242719] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.242786] PCI: Using configuration type 1 for base access
[ 0.242860] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.245177] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.389224] alg: No test for lzo-rle (lzo-rle-generic)
[ 0.389224] alg: No test for lzo-rle (lzo-rle-scomp)
[ 0.389224] ACPI: Added _OSI(Module Device)
[ 0.389224] ACPI: Added _OSI(Processor Device)
[ 0.389224] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.389275] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.389332] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.389390] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.389445] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.393037] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.393037] ACPI: EC: EC started
[ 0.393037] ACPI: EC: interrupt blocked
[ 0.393037] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.393037] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.393037] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.393037] ACPI: Interpreter enabled
[ 0.393105] ACPI: (supports S0 S3 S4 S5)
[ 0.393160] ACPI: Using IOAPIC for interrupt routing
[ 0.393231] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.393412] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.397871] ACPI: Power Resource [FPWR] (off)
[ 0.398173] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.398235] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.398341] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.398420] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.398530] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.398740] PCI host bridge to bus 0000:00
[ 0.398796] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.398855] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.398914] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.398984] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.399054] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.399123] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.399192] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.399256] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.399326] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.399395] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.399465] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.399533] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.399602] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.399671] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.399740] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.399808] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.399877] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.399947] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.400011] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.400147] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.400213] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit]
[ 0.400276] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.400347] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.400465] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.400531] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit]
[ 0.400671] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.400751] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit]
[ 0.400875] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.400998] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.401056] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff]
[ 0.401120] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff]
[ 0.401185] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
[ 0.401298] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.401419] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.401496] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff]
[ 0.401635] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.401757] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.401835] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit]
[ 0.401964] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.402089] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[ 0.402296] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.402382] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.402439] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.402571] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[ 0.402807] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.402889] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 0.402948] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 0.403082] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400
[ 0.403312] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.403396] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.403454] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.403584] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.403661] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff]
[ 0.403799] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.403919] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.404134] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.404212] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087]
[ 0.404275] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093]
[ 0.404338] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f]
[ 0.404401] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097]
[ 0.404465] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.404527] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff]
[ 0.404628] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.404745] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.404822] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit]
[ 0.404899] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.405025] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.405059] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit]
[ 0.405337] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000
[ 0.405489] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit]
[ 0.405605] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit]
[ 0.405911] pci 0000:01:00.0: supports D1 D2
[ 0.405967] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.406293] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.406356] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
[ 0.406693] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
[ 0.406984] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.407288] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff]
[ 0.407862] pci 0000:02:00.0: supports D1 D2
[ 0.407917] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408351] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.408412] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.408471] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.408538] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.408673] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.408733] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.408795] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.408859] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.409069] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.409165] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.409258] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.409348] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.409439] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.409531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.409622] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.409711] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.410345] ACPI: EC: interrupt unblocked
[ 0.410407] ACPI: EC: event unblocked
[ 0.410466] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.410537] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[ 0.410656] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.410656] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.410656] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.410656] vgaarb: loaded
[ 0.410656] EDAC MC: Ver: 3.0.0
[ 0.413053] PCI: Using ACPI for IRQ routing
[ 0.414572] PCI: pci_cache_line_size set to 64 bytes
[ 0.415110] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.415111] e820: reserve RAM buffer [mem 0x7ff23000-0x7fffffff]
[ 0.415111] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
[ 0.415617] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.415678] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.418056] clocksource: Switched to clocksource tsc-early
[ 0.426633] VFS: Disk quotas dquot_6.6.0
[ 0.426704] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.426860] AppArmor: AppArmor Filesystem Enabled
[ 0.426932] pnp: PnP ACPI init
[ 0.427116] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.427224] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.427281] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.427340] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.427400] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.427459] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.428718] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.428777] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.428836] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.428896] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.428954] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.429018] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.429433] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.429495] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.429525] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.429583] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.429643] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.429658] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.429681] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.429699] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.429717] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.429733] pnp: PnP ACPI: found 7 devices
[ 0.435312] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.435392] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.435455] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
[ 0.435525] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.435584] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.435647] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.435707] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.435783] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.435841] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.435905] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.435966] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.436043] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.436101] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.436161] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.436220] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.436280] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.436337] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.436396] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.436453] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.436513] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.436572] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.436632] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.436690] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.436750] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.436810] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.436869] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.436928] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
[ 0.436986] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.437048] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff]
[ 0.437107] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.437165] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.437223] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.437292] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.437350] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff]
[ 0.437408] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.437539] NET: Registered protocol family 2
[ 0.437708] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.437825] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.438067] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.438226] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.438315] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438408] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438525] NET: Registered protocol family 1
[ 0.438585] NET: Registered protocol family 44
[ 0.438648] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.439375] PCI: CLS 64 bytes, default 64
[ 0.439468] Trying to unpack rootfs image as initramfs...
[ 1.172367] Freeing initrd memory: 56812K
[ 1.172470] DMAR: No ATSR found
[ 1.172554] DMAR: dmar0: Using Queued invalidation
[ 1.172616] DMAR: dmar1: Using Queued invalidation
[ 1.243042] pci 0000:00:02.0: DMAR: Software identity mapping
[ 1.243104] DMAR: Setting RMRR:
[ 1.243159] pci 0000:00:02.0: DMAR: Setting identity map [0x80800000 - 0x829fffff]
[ 1.243380] DMAR: Prepare 0-16MiB unity mapping for LPC
[ 1.243487] pci 0000:00:1f.0: DMAR: Setting identity map [0x0 - 0xffffff]
[ 1.243805] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.243929] pci 0000:00:00.0: Adding to iommu group 0
[ 1.243995] pci 0000:00:02.0: Adding to iommu group 1
[ 1.244059] pci 0000:00:04.0: Adding to iommu group 2
[ 1.244124] pci 0000:00:14.0: Adding to iommu group 3
[ 1.244188] pci 0000:00:19.0: Adding to iommu group 4
[ 1.244253] pci 0000:00:1a.0: Adding to iommu group 5
[ 1.244317] pci 0000:00:1b.0: Adding to iommu group 6
[ 1.244382] pci 0000:00:1c.0: Adding to iommu group 7
[ 1.244446] pci 0000:00:1c.1: Adding to iommu group 8
[ 1.244512] pci 0000:00:1c.2: Adding to iommu group 9
[ 1.244575] pci 0000:00:1d.0: Adding to iommu group 10
[ 1.244650] pci 0000:00:1f.0: Adding to iommu group 11
[ 1.244715] pci 0000:00:1f.2: Adding to iommu group 11
[ 1.244779] pci 0000:00:1f.3: Adding to iommu group 11
[ 1.244845] pci 0000:00:1f.6: Adding to iommu group 11
[ 1.244910] pci 0000:01:00.0: Adding to iommu group 12
[ 1.244973] pci 0000:02:00.0: Adding to iommu group 13
[ 1.247037] Initialise system trusted keyrings
[ 1.247099] Key type blacklist registered
[ 1.247194] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.248289] zbud: loaded
[ 1.248626] Platform Keyring initialized
[ 1.248684] Key type asymmetric registered
[ 1.248741] Asymmetric key parser 'x509' registered
[ 1.248805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.248906] io scheduler mq-deadline registered
[ 1.249217] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[ 1.249479] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
[ 1.249565] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.249882] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
[ 1.249965] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.250159] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.250229] intel_idle: MWAIT substates: 0x21120
[ 1.250230] intel_idle: v0.4.1 model 0x3A
[ 1.250372] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.252069] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.252128] ACPI: Thermal Zone [THM0] (55 C)
[ 1.253230] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.253291] ACPI: Thermal Zone [THM1] (27 C)
[ 1.253434] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.253830] Linux agpgart interface v0.103
[ 1.253926] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.253987] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.254218] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.255967] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.256028] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.256161] mousedev: PS/2 mouse device common for all mice
[ 1.256252] rtc_cmos 00:03: RTC can wake from S4
[ 1.256453] rtc_cmos 00:03: registered as rtc0
[ 1.256522] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.256612] intel_pstate: Intel P-state driver initializing
[ 1.256759] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.257427] NET: Registered protocol family 10
[ 1.257564] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.275323] Segment Routing with IPv6
[ 1.275435] mip6: Mobile IPv6
[ 1.275503] NET: Registered protocol family 17
[ 1.275717] mpls_gso: MPLS GSO support
[ 1.276281] mce: Using 7 MCE banks
[ 1.276423] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.276551] microcode: Microcode Update Driver: v2.2.
[ 1.276575] sched_clock: Marking stable (1268929190, 7327232)->(1282416661, -6160239)
[ 1.277080] registered taskstats version 1
[ 1.277148] Loading compiled-in X.509 certificates
[ 1.315100] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.315180] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.315252] zswap: loaded using pool lzo/zbud
[ 1.315391] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.315817] rtc_cmos 00:03: setting system clock to 2019-09-24T22:43:27 UTC (1569365007)
[ 1.316817] Freeing unused kernel image memory: 1640K
[ 1.349171] Write protecting the kernel read-only data: 16384k
[ 1.350251] Freeing unused kernel image memory: 2036K
[ 1.350789] Freeing unused kernel image memory: 580K
[ 1.365447] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.365506] x86/mm: Checking user space page tables
[ 1.371069] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.371128] Run /init as init process
[ 1.486366] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2
[ 1.486469] ACPI: Sleep Button [SLPB]
[ 1.486588] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3
[ 1.486678] ACPI: Lid Switch [LID]
[ 1.486791] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.486871] ACPI: Power Button [PWRF]
[ 1.520662] ACPI: bus type USB registered
[ 1.520742] usbcore: registered new interface driver usbfs
[ 1.520809] usbcore: registered new interface driver hub
[ 1.520886] usbcore: registered new device driver usb
[ 1.521495] sdhci: Secure Digital Host Controller Interface driver
[ 1.521555] sdhci: Copyright(c) Pierre Ossman
[ 1.525659] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.525821] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 1.526273] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.527591] ehci-pci: EHCI PCI platform driver
[ 1.527603] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.527776] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.527840] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.527920] ehci-pci 0000:00:1a.0: debug port 2
[ 1.531927] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.534821] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190509/utaddress-213)
[ 1.534923] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.534999] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190509/utaddress-213)
[ 1.535093] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.535169] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190509/utaddress-213)
[ 1.535264] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.535342] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190509/utaddress-213)
[ 1.535436] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.535511] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.537996] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.538494] pps_core: LinuxPPS API ver. 1 registered
[ 1.538552] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.539998] PTP clock support registered
[ 1.545979] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000
[ 1.552266] cryptd: max_cpu_qlen set to 1000
[ 1.555511] SCSI subsystem initialized
[ 1.561205] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.561332] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 1.561406] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.561478] usb usb1: Product: EHCI Host Controller
[ 1.561539] usb usb1: Manufacturer: Linux 5.2.0-2-amd64 ehci_hcd
[ 1.561599] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.561798] hub 1-0:1.0: USB hub found
[ 1.561864] hub 1-0:1.0: 3 ports detected
[ 1.562202] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.562270] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.562354] ehci-pci 0000:00:1d.0: debug port 2
[ 1.565570] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.565648] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.565846] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.566375] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.567558] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000
[ 1.582573] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.582697] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 1.582770] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.582842] usb usb2: Product: EHCI Host Controller
[ 1.582902] usb usb2: Manufacturer: Linux 5.2.0-2-amd64 ehci_hcd
[ 1.582963] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.583389] hub 2-0:1.0: USB hub found
[ 1.583675] hub 2-0:1.0: 3 ports detected
[ 1.590569] AVX version of gcm_enc/dec engaged.
[ 1.590629] AES CTR mode by8 optimization enabled
[ 1.593125] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.600537] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.600605] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.601792] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.601869] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.602084] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 1.602156] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.602225] usb usb3: Product: xHCI Host Controller
[ 1.602283] usb usb3: Manufacturer: Linux 5.2.0-2-amd64 xhci-hcd
[ 1.602342] usb usb3: SerialNumber: 0000:00:14.0
[ 1.602623] hub 3-0:1.0: USB hub found
[ 1.602694] hub 3-0:1.0: 4 ports detected
[ 1.602938] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.603001] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.603074] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.603132] libata version 3.00 loaded.
[ 1.603203] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[ 1.603277] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.603348] usb usb4: Product: xHCI Host Controller
[ 1.603406] usb usb4: Manufacturer: Linux 5.2.0-2-amd64 xhci-hcd
[ 1.603468] usb usb4: SerialNumber: 0000:00:14.0
[ 1.603907] hub 4-0:1.0: USB hub found
[ 1.603976] hub 4-0:1.0: 4 ports detected
[ 1.608647] ahci 0000:00:1f.2: version 3.0
[ 1.608807] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.618972] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.619053] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.619976] scsi host0: ahci
[ 1.620193] scsi host1: ahci
[ 1.620366] scsi host2: ahci
[ 1.620536] scsi host3: ahci
[ 1.620710] scsi host4: ahci
[ 1.620876] scsi host5: ahci
[ 1.621006] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31
[ 1.621086] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31
[ 1.621161] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31
[ 1.621235] ata4: DUMMY
[ 1.621293] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31
[ 1.621365] ata6: DUMMY
[ 1.629429] [drm] VT-d active for gfx access
[ 1.629492] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.630699] Console: switching to colour dummy device 80x25
[ 1.630735] [drm] DMAR active, disabling use of stolen memory
[ 1.682702] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.682708] [drm] Driver supports precise vblank timestamp query.
[ 1.682960] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.726980] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.735664] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0
[ 1.735784] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.757738] acpi device:0d: registered as cooling_device5
[ 1.757796] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.851236] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66
[ 1.851242] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.851284] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.852158] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 1.897101] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.921070] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.935478] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.936405] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133
[ 1.936427] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.936655] ata1.00: configured for UDMA/133
[ 1.936972] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5
[ 2.009499] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.053330] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.053334] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.053734] hub 1-1:1.0: USB hub found
[ 2.053828] hub 1-1:1.0: 6 ports detected
[ 2.059791] fbcon: i915drmfb (fb0) is primary device
[ 2.082139] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.082142] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.083769] hub 2-1:1.0: USB hub found
[ 2.084056] hub 2-1:1.0: 8 ports detected
[ 2.153695] usb 4-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21
[ 2.153701] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.153704] usb 4-3: Product: USB3.0 Hub
[ 2.153707] usb 4-3: Manufacturer: VIA Labs, Inc.
[ 2.157318] hub 4-3:1.0: USB hub found
[ 2.157515] hub 4-3:1.0: 4 ports detected
[ 2.251559] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 2.252174] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.253121] tsc: Refined TSC clocksource calibration: 2893.427 MHz
[ 2.253140] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502105a9, max_idle_ns: 440795323709 ns
[ 2.253178] clocksource: Switched to clocksource tsc
[ 2.277095] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 2.289611] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[ 2.289614] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.313026] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 2.313035] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.339411] ata2.00: configured for UDMA/133
[ 2.341080] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.348972] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[ 2.352162] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.373138] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.435392] usb 3-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21
[ 2.435396] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.435398] usb 3-3: Product: USB2.0 Hub
[ 2.435399] usb 3-3: Manufacturer: VIA Labs, Inc.
[ 2.436873] hub 3-3:1.0: USB hub found
[ 2.437198] hub 3-3:1.0: 4 ports detected
[ 2.450218] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 2.450224] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.450229] usb 1-1.3: Product: Biometric Coprocessor
[ 2.450232] usb 1-1.3: Manufacturer: Auth
[ 2.486031] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.486035] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.486760] hub 2-1.5:1.0: USB hub found
[ 2.486909] hub 2-1.5:1.0: 6 ports detected
[ 2.529128] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.641257] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 2.641261] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.641263] usb 1-1.4: Product: BCM20702A0
[ 2.641265] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.641266] usb 1-1.4: SerialNumber: B8763FA9D32E
[ 2.663996] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.664405] ata3.00: supports DRM functions and may not be fully accessible
[ 2.664627] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133
[ 2.664630] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.665384] ata3.00: Trusted Computing capability qword not valid!
[ 2.665969] ata3.00: supports DRM functions and may not be fully accessible
[ 2.666760] ata3.00: Trusted Computing capability qword not valid!
[ 2.666767] ata3.00: configured for UDMA/133
[ 2.667303] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5
[ 2.725122] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.781124] usb 2-1.5.1: new full-speed USB device number 4 using ehci-pci
[ 2.841519] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 2.841522] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.841524] usb 1-1.6: Product: Integrated Camera
[ 2.841526] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 2.873548] Console: switching to colour frame buffer device 240x67
[ 2.893853] usb 2-1.5.1: New USB device found, idVendor=17ef, idProduct=604d, bcdDevice= 1.22
[ 2.893857] usb 2-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.893859] usb 2-1.5.1: Product: Lenovo USB Receiver
[ 2.911860] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.913477] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.938230] usbcore: registered new interface driver usbhid
[ 2.941343] usbhid: USB HID core driver
[ 2.945766] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.0/0003:17EF:604D.0001/input/input8
[ 2.977128] usb 2-1.5.3: new high-speed USB device number 5 using ehci-pci
[ 2.981432] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.985947] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.002179] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.002267] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.004071] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.004103] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.004121] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 3.004132] sd 0:0:0:0: [sda] Write Protect is off
[ 3.004134] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.004154] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.005799] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 3.007520] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.009182] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input0
[ 3.009224] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.009324] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.1/0003:17EF:604D.0002/input/input9
[ 3.009856] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input1
[ 3.010168] input: Lenovo USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:17EF:604D.0003/input/input10
[ 3.011009] sda: sda1 sda2 < sda5 >
[ 3.011031] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.012346] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.012364] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.014243] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.016654] sdc: sdc1 sdc2 sdc3
[ 3.031841] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.034517] sdb: sdb1
[ 3.036069] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.069100] input: Lenovo USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:17EF:604D.0003/input/input11
[ 3.070682] input: Lenovo USB Receiver Keypad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:17EF:604D.0003/input/input12
[ 3.072129] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[ 3.105988] usb 2-1.5.3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 3.107448] usb 2-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.109332] hub 2-1.5.3:1.0: USB hub found
[ 3.111184] hub 2-1.5.3:1.0: 4 ports detected
[ 3.197056] usb 2-1.5.6: new high-speed USB device number 6 using ehci-pci
[ 3.200251] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 3.305768] usb 2-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 3.307604] usb 2-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.310072] hub 2-1.5.6:1.0: USB hub found
[ 3.312112] hub 2-1.5.6:1.0: 4 ports detected
[ 3.377040] raid6: sse2x4 gen() 14392 MB/s
[ 3.445041] raid6: sse2x4 xor() 9948 MB/s
[ 3.513042] raid6: sse2x2 gen() 11660 MB/s
[ 3.565042] usb 2-1.5.2: new full-speed USB device number 7 using ehci-pci
[ 3.581044] raid6: sse2x2 xor() 5469 MB/s
[ 3.649042] raid6: sse2x1 gen() 10818 MB/s
[ 3.676023] usb 2-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03
[ 3.677459] usb 2-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.681991] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.0/0003:04B4:4042.0004/input/input13
[ 3.717043] raid6: sse2x1 xor() 7303 MB/s
[ 3.718434] raid6: using algorithm sse2x4 gen() 14392 MB/s
[ 3.719813] raid6: .... xor() 9948 MB/s, rmw enabled
[ 3.721219] raid6: using ssse3x2 recovery algorithm
[ 3.723553] xor: automatically using best checksumming function avx
[ 3.725514] async_tx: api initialized (async)
[ 3.741202] hid-generic 0003:04B4:4042.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0
[ 3.749975] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input14
[ 3.752374] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input15
[ 3.754440] usb 2-1.5.6.1: new high-speed USB device number 8 using ehci-pci
[ 3.813303] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input16
[ 3.818312] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input17
[ 3.821797] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input18
[ 3.825382] hid-generic 0003:04B4:4042.0005: input,hiddev1,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1
[ 3.881993] usb 2-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 3.885007] usb 2-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.888528] hub 2-1.5.6.1:1.0: USB hub found
[ 3.893122] hub 2-1.5.6.1:1.0: 4 ports detected
[ 3.943185] device-mapper: uevent: version 1.0.3
[ 3.944958] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 4.181135] usb 2-1.5.6.1.2: new full-speed USB device number 9 using ehci-pci
[ 4.300189] usb 2-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02
[ 4.304161] usb 2-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.307022] usb 2-1.5.6.1.2: Product: IEEE-1284 Controller
[ 4.309853] usb 2-1.5.6.1.2: Manufacturer: Prolific Technology Inc.
[ 4.393135] usb 2-1.5.6.1.3: new full-speed USB device number 10 using ehci-pci
[ 4.507715] usb 2-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00
[ 4.511562] usb 2-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.515309] usb 2-1.5.6.1.3: Product: USB-Serial Controller D
[ 4.516893] usb 2-1.5.6.1.3: Manufacturer: Prolific Technology Inc.
[ 10.218226] PM: Image not found (code -22)
[ 10.222965] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 10.222967] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 10.222971] PM: Marking nosave pages: [mem 0x7ff23000-0xffffffff]
[ 10.225111] PM: Basic memory bitmaps created
[ 10.226110] PM: Basic memory bitmaps freed
[ 10.226985] video LNXVIDEO:00: Restoring backlight state
[ 11.503187] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.566285] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 11.725409] systemd[1]: Inserted module 'autofs4'
[ 11.750867] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 11.773263] systemd[1]: Detected architecture x86-64.
[ 11.784549] systemd[1]: Set hostname to <TP-T430s>.
[ 11.785131] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 11.882333] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 11.915549] systemd[1]: /lib/systemd/system/thinkfan.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly.
[ 11.919006] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 11.934963] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[ 11.938247] systemd[1]: /lib/systemd/system/docker.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
[ 11.963535] systemd[1]: /lib/systemd/system/pcscd.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
[ 12.029082] loop: module loaded
[ 12.035327] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 12.046204] lp: driver loaded but no devices found
[ 12.050724] ppdev: user-space parallel port driver
[ 12.386847] ACPI: AC Adapter [AC] (on-line)
[ 12.398689] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 12.400402] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 12.422246] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 12.424813] Non-volatile memory driver v1.3
[ 12.456293] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 12.457732] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 12.459151] thinkpad_acpi: ThinkPad BIOS CBET4000 4.10-759-g52b1e2814a, EC G7HT39WW-3.22
[ 12.460592] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU
[ 12.480753] thinkpad_acpi: radio switch found; radios are enabled
[ 12.482420] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 12.484064] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 12.484065] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 12.486924] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 12.490948] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 12.499339] systemd-journald[490]: Received request to flush runtime journal from PID 1
[ 12.501385] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 12.518673] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 12.522043] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 12.522047] battery: new extension: ThinkPad Battery Extension
[ 12.525264] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input19
[ 12.570296] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.579944] iTCO_vendor_support: vendor-support=0
[ 12.581647] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.583399] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 12.585080] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 12.587607] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.589283] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 12.593436] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.599275] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.600899] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.602571] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 12.604194] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.605728] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.607472] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 12.609080] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 12.611270] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 12.629445] wl: loading out-of-tree module taints kernel.
[ 12.630760] wl: module license 'MIXED/Proprietary' taints kernel.
[ 12.631944] Disabling lock debugging due to kernel taint
[ 12.637296] input: PC Speaker as /devices/platform/pcspkr/input/input25
[ 12.641481] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 12.642786] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 12.644275] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 12.646276] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 12.648000] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 12.649915] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[ 12.651775] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[ 12.654029] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[ 12.656163] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[ 12.673293] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 12.674992] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 12.676574] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 12.678299] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 12.680457] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 12.843575] intel_rapl: Found RAPL domain package
[ 12.845288] intel_rapl: Found RAPL domain core
[ 12.846771] intel_rapl: Found RAPL domain uncore
[ 12.977102] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS
[ 12.994281] wl 0000:01:00.0 wlp1s0: renamed from wlan0
[ 13.285539] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 13.291678] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 13.440302] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.494278] audit: type=1400 audit(1569365019.673:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1500 comm="apparmor_parser"
[ 13.495543] audit: type=1400 audit(1569365019.673:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1500 comm="apparmor_parser"
[ 13.496862] audit: type=1400 audit(1569365019.673:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1500 comm="apparmor_parser"
[ 13.499434] audit: type=1400 audit(1569365019.677:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1502 comm="apparmor_parser"
[ 13.500560] audit: type=1400 audit(1569365019.677:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1501 comm="apparmor_parser"
[ 13.502907] audit: type=1400 audit(1569365019.685:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1504 comm="apparmor_parser"
[ 13.505116] audit: type=1400 audit(1569365019.685:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1499 comm="apparmor_parser"
[ 13.506680] audit: type=1400 audit(1569365019.685:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1503 comm="apparmor_parser"
[ 13.508159] audit: type=1400 audit(1569365019.685:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1503 comm="apparmor_parser"
[ 13.509833] audit: type=1400 audit(1569365019.685:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1506 comm="apparmor_parser"
[ 13.679615] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input29
[ 13.782682] Process accounting resumed
[ 14.366035] aufs 5.2-20190902
[ 14.733617] vboxdrv: Found 4 processor cores
[ 14.757202] vboxdrv: TSC mode is Invariant, tentative frequency 2893420447 Hz
[ 14.758551] vboxdrv: Successfully loaded version 6.0.11 (interface 0x00290008)
[ 14.972631] VBoxNetFlt: Successfully started.
[ 14.981057] VBoxNetAdp: Successfully started.
[ 14.997080] VBoxPciLinuxInit
[ 15.006254] vboxpci: IOMMU found
[ 15.184815] media: Linux media interface: v0.10
[ 15.202609] videodev: Linux video capture interface: v2.00
[ 15.295912] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 15.313953] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 15.328361] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 15.329687] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 15.330986] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 15.332280] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 15.336005] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input30
[ 15.338594] usbcore: registered new interface driver uvcvideo
[ 15.340038] USB Video Class driver (1.1.1)
[ 15.399831] Bluetooth: Core ver 2.22
[ 15.400956] NET: Registered protocol family 31
[ 15.402056] Bluetooth: HCI device and connection manager initialized
[ 15.403427] Bluetooth: HCI socket layer initialized
[ 15.404489] Bluetooth: L2CAP socket layer initialized
[ 15.405894] Bluetooth: SCO socket layer initialized
[ 15.418088] usbcore: registered new interface driver btusb
[ 15.480356] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.481625] Bluetooth: BNEP filters: protocol multicast
[ 15.483080] Bluetooth: BNEP socket layer initialized
[ 15.531238] Bluetooth: hci0: BCM: chip id 63
[ 15.532237] Bluetooth: hci0: BCM: features 0x07
[ 15.548245] Bluetooth: hci0: TP-T430s
[ 15.552246] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[ 15.554221] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd
[ 16.479238] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[ 16.495242] Bluetooth: hci0: Broadcom Bluetooth Device
[ 16.563781] Bluetooth: RFCOMM TTY layer initialized
[ 16.563788] Bluetooth: RFCOMM socket layer initialized
[ 16.563794] Bluetooth: RFCOMM ver 1.11
[ 17.071556] usblp 2-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[ 17.071743] usbcore: registered new interface driver usblp
[ 17.111234] usbcore: registered new interface driver usbserial_generic
[ 17.111248] usbserial: USB Serial support registered for generic
[ 17.116097] usbcore: registered new interface driver pl2303
[ 17.116969] usbserial: USB Serial support registered for pl2303
[ 17.118120] pl2303 2-1.5.6.1.3:1.0: pl2303 converter detected
[ 17.120961] usb 2-1.5.6.1.3: pl2303 converter now attached to ttyUSB0
[ 18.159048] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 18.159093] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[ 21.595136] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 25.040905] kauditd_printk_skb: 26 callbacks suppressed
[ 25.040906] audit: type=1400 audit(1569365031.217:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3114 comm="apparmor_parser"
[ 25.183594] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 25.185370] Bridge firewalling registered
[ 25.455944] Initializing XFRM netlink socket
[ 33.745617] fuse: init (API version 7.31)
[ 35.771195] rfkill: input handler disabled
[ 36.817621] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready